Merge tag 'nand/for-6.6' into mtd/next

Raw NAND core changes:
* Fix -Wvoid-pointer-to-enum-cast warning
* Export 'nand_exit_status_op()'
* dt-bindings: Fix nand-controller.yaml license

Raw NAND controller driver changes:
* Omap, Omap2, Samsung, Atmel, fsl_upm, lpc32xx_slc, lpc32xx_mlc, STM32_FMC2,
  sh_ftlctl, MXC, Sunxi:
  - Use devm_platform_get_and_ioremap_resource()
* Orion, vf610_nfc, Sunxi, STM32_FMC2, MTK, mpc5121, lpc32xx_slc, Intel,
  FSMC, Arasan:
  - Use helper function devm_clk_get_optional_enabled()
* Brcmnand:
  - Use devm_platform_ioremap_resource_byname()
  - Propagate init error -EPROBE_DEFER up
  - Propagate error and simplify ternary operators
  - Fix mtd oobsize
  - Fix potential out-of-bounds access in oob write
  - Fix crash during the panic_write
  - Fix potential false time out warning
  - Fix ECC level field setting for v7.2 controller
* fsmc: Handle clk prepare error in fsmc_nand_resume()
* Marvell: Add support for AC5 SoC
* Meson:
  - Support for 512B ECC step size
  - Fix build error
  - Use NAND core API to check status
  - dt-bindings:
    * Make ECC properties dependent
    * Support for 512B ECC step size
    * Drop unneeded quotes
* Oxnas: Remove driver and bindings
* Qcom:
  - Conversion to ->exec_op()
  - Removal of the legacy interface
  - Two full series of improvements/misc fixes
    * Use the BIT() macro
    * Use u8 instead of uint8_t
    * Fix alignment with open parenthesis
    * Fix the spacing
    * Fix wrong indentation
    * Fix a typo
    * Early structure initialization
    * Fix address parsing within ->exec_op()
    * Remove superfluous initialization of "ret"
    * Rename variables in qcom_op_cmd_mapping()
    * Handle unsupported opcode in qcom_op_cmd_mapping()
    * Fix the opcode check in qcom_check_op()
    * Use EOPNOTSUPP instead of ENOTSUPP
    * Wrap qcom_nand_exec_op() to 80 columns
    * Unmap sg_list and free desc within submic_descs()
    * Simplify the call to nand_prog_page_end_op()
    * Do not override the error no of submit_descs()
    * Sort includes alphabetically
    * Clear buf_count and buf_start in raw read
    * Add read/read_start ops in exec_op path
* vf610_nfc: Do not check 0 for platform_get_irq()

SPI-NAND changes:
* gigadevice: Add support for GD5F1GQ{4,5}RExxH
* esmt: Add support for F50D2G41KA
* toshiba: Add support for T{C,H}58NYG{0,2}S3HBAI4 and TH58NYG3S0HBAI6

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

1 files changed, 3 insertions, 12 deletions

diff --git a/drivers/mtd/nand/raw/intel-nand-controller.c b/drivers/mtd/nand/raw/intel-nand-controller.c
index a9909eb08124..cb5d88f42297 100644
--- a/drivers/mtd/nand/raw/intel-nand-controller.c
+++ b/drivers/mtd/nand/raw/intel-nand-controller.c
@@ -626,16 +626,10 @@ static int ebu_nand_probe(struct platform_device *pdev)
 		goto err_of_node_put;
 	}
 
-	ebu_host->clk = devm_clk_get(dev, NULL);
+	ebu_host->clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(ebu_host->clk)) {
 		ret = dev_err_probe(dev, PTR_ERR(ebu_host->clk),
-				    "failed to get clock\n");
-		goto err_of_node_put;
-	}
-
-	ret = clk_prepare_enable(ebu_host->clk);
-	if (ret) {
-		dev_err(dev, "failed to enable clock: %d\n", ret);
+				    "failed to get and enable clock\n");
 		goto err_of_node_put;
 	}
 
@@ -643,7 +637,7 @@ static int ebu_nand_probe(struct platform_device *pdev)
 	if (IS_ERR(ebu_host->dma_tx)) {
 		ret = dev_err_probe(dev, PTR_ERR(ebu_host->dma_tx),
 				    "failed to request DMA tx chan!.\n");
-		goto err_disable_unprepare_clk;
+		goto err_of_node_put;
 	}
 
 	ebu_host->dma_rx = dma_request_chan(dev, "rx");
@@ -698,8 +692,6 @@ err_clean_nand:
 	nand_cleanup(&ebu_host->chip);
 err_cleanup_dma:
 	ebu_dma_cleanup(ebu_host);
-err_disable_unprepare_clk:
-	clk_disable_unprepare(ebu_host->clk);
 err_of_node_put:
 	of_node_put(chip_np);
 
@@ -716,7 +708,6 @@ static void ebu_nand_remove(struct platform_device *pdev)
 	nand_cleanup(&ebu_host->chip);
 	ebu_nand_disable(&ebu_host->chip);
 	ebu_dma_cleanup(ebu_host);
-	clk_disable_unprepare(ebu_host->clk);
 }
 
 static const struct of_device_id ebu_nand_match[] = {