i40e: Refactor VF BW rate limiting

This patch refactors the BW rate limiting for Tx traffic
on the VF to be reused in the next patch for rate limiting Tx
traffic for the VSIs on the PF as well.

Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 64 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index e803aa1552c6..fc6eaf44d87c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -5400,6 +5400,70 @@ out:
 }
 
 /**
+ * i40e_get_link_speed - Returns link speed for the interface
+ * @vsi: VSI to be configured
+ *
+ **/
+int i40e_get_link_speed(struct i40e_vsi *vsi)
+{
+	struct i40e_pf *pf = vsi->back;
+
+	switch (pf->hw.phy.link_info.link_speed) {
+	case I40E_LINK_SPEED_40GB:
+		return 40000;
+	case I40E_LINK_SPEED_25GB:
+		return 25000;
+	case I40E_LINK_SPEED_20GB:
+		return 20000;
+	case I40E_LINK_SPEED_10GB:
+		return 10000;
+	case I40E_LINK_SPEED_1GB:
+		return 1000;
+	default:
+		return -EINVAL;
+	}
+}
+
+/**
+ * i40e_set_bw_limit - setup BW limit for Tx traffic based on max_tx_rate
+ * @vsi: VSI to be configured
+ * @seid: seid of the channel/VSI
+ * @max_tx_rate: max TX rate to be configured as BW limit
+ *
+ * Helper function to set BW limit for a given VSI
+ **/
+int i40e_set_bw_limit(struct i40e_vsi *vsi, u16 seid, u64 max_tx_rate)
+{
+	struct i40e_pf *pf = vsi->back;
+	int speed = 0;
+	int ret = 0;
+
+	speed = i40e_get_link_speed(vsi);
+	if (max_tx_rate > speed) {
+		dev_err(&pf->pdev->dev,
+			"Invalid max tx rate %llu specified for VSI seid %d.",
+			max_tx_rate, seid);
+		return -EINVAL;
+	}
+	if (max_tx_rate && max_tx_rate < 50) {
+		dev_warn(&pf->pdev->dev,
+			 "Setting max tx rate to minimum usable value of 50Mbps.\n");
+		max_tx_rate = 50;
+	}
+
+	/* Tx rate credits are in values of 50Mbps, 0 is disabled */
+	ret = i40e_aq_config_vsi_bw_limit(&pf->hw, seid,
+					  max_tx_rate / I40E_BW_CREDIT_DIVISOR,
+					  I40E_MAX_BW_INACTIVE_ACCUM, NULL);
+	if (ret)
+		dev_err(&pf->pdev->dev,
+			"Failed set tx rate (%llu Mbps) for vsi->seid %u, err %s aq_err %s\n",
+			max_tx_rate, seid, i40e_stat_str(&pf->hw, ret),
+			i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status));
+	return ret;
+}
+
+/**
  * i40e_remove_queue_channels - Remove queue channels for the TCs
  * @vsi: VSI to be configured
  *