Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue

Tony Nguyen says:

====================
100GbE Intel Wired LAN Driver Updates 2022-02-09

This series contains updates to ice driver only.

Brett adds support for QinQ. This begins with code refactoring and
re-organization of VLAN configuration functions to allow for
introduction of VSI VLAN ops to enable setting and calling of
respective operations based on device support of single or double
VLANs. Implementations are added for outer VLAN support.

To support QinQ, the device must be set to double VLAN mode (DVM).
In order for this to occur, the DDP package and NVM must also support
DVM. Functions to determine compatibility and properly configure the
device are added as well as setting the proper bits to advertise and
utilize the proper offloads. Support for VIRTCHNL_VF_OFFLOAD_VLAN_V2
is also included to allow for VF to negotiate and utilize this
functionality.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 80 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/ice/ice_switch.c b/drivers/net/ethernet/intel/ice/ice_switch.c
index 11ae0bee3590..4143728a1919 100644
--- a/drivers/net/ethernet/intel/ice/ice_switch.c
+++ b/drivers/net/ethernet/intel/ice/ice_switch.c
@@ -1097,6 +1097,64 @@ ice_aq_get_recipe(struct ice_hw *hw,
 }
 
 /**
+ * ice_update_recipe_lkup_idx - update a default recipe based on the lkup_idx
+ * @hw: pointer to the HW struct
+ * @params: parameters used to update the default recipe
+ *
+ * This function only supports updating default recipes and it only supports
+ * updating a single recipe based on the lkup_idx at a time.
+ *
+ * This is done as a read-modify-write operation. First, get the current recipe
+ * contents based on the recipe's ID. Then modify the field vector index and
+ * mask if it's valid at the lkup_idx. Finally, use the add recipe AQ to update
+ * the pre-existing recipe with the modifications.
+ */
+int
+ice_update_recipe_lkup_idx(struct ice_hw *hw,
+			   struct ice_update_recipe_lkup_idx_params *params)
+{
+	struct ice_aqc_recipe_data_elem *rcp_list;
+	u16 num_recps = ICE_MAX_NUM_RECIPES;
+	int status;
+
+	rcp_list = kcalloc(num_recps, sizeof(*rcp_list), GFP_KERNEL);
+	if (!rcp_list)
+		return -ENOMEM;
+
+	/* read current recipe list from firmware */
+	rcp_list->recipe_indx = params->rid;
+	status = ice_aq_get_recipe(hw, rcp_list, &num_recps, params->rid, NULL);
+	if (status) {
+		ice_debug(hw, ICE_DBG_SW, "Failed to get recipe %d, status %d\n",
+			  params->rid, status);
+		goto error_out;
+	}
+
+	/* only modify existing recipe's lkup_idx and mask if valid, while
+	 * leaving all other fields the same, then update the recipe firmware
+	 */
+	rcp_list->content.lkup_indx[params->lkup_idx] = params->fv_idx;
+	if (params->mask_valid)
+		rcp_list->content.mask[params->lkup_idx] =
+			cpu_to_le16(params->mask);
+
+	if (params->ignore_valid)
+		rcp_list->content.lkup_indx[params->lkup_idx] |=
+			ICE_AQ_RECIPE_LKUP_IGNORE;
+
+	status = ice_aq_add_recipe(hw, &rcp_list[0], 1, NULL);
+	if (status)
+		ice_debug(hw, ICE_DBG_SW, "Failed to update recipe %d lkup_idx %d fv_idx %d mask %d mask_valid %s, status %d\n",
+			  params->rid, params->lkup_idx, params->fv_idx,
+			  params->mask, params->mask_valid ? "true" : "false",
+			  status);
+
+error_out:
+	kfree(rcp_list);
+	return status;
+}
+
+/**
  * ice_aq_map_recipe_to_profile - Map recipe to packet profile
  * @hw: pointer to the HW struct
  * @profile_id: package profile ID to associate the recipe with
@@ -1539,6 +1597,7 @@ ice_fill_sw_rule(struct ice_hw *hw, struct ice_fltr_info *f_info,
 		 struct ice_aqc_sw_rules_elem *s_rule, enum ice_adminq_opc opc)
 {
 	u16 vlan_id = ICE_MAX_VLAN_ID + 1;
+	u16 vlan_tpid = ETH_P_8021Q;
 	void *daddr = NULL;
 	u16 eth_hdr_sz;
 	u8 *eth_hdr;
@@ -1611,6 +1670,8 @@ ice_fill_sw_rule(struct ice_hw *hw, struct ice_fltr_info *f_info,
 		break;
 	case ICE_SW_LKUP_VLAN:
 		vlan_id = f_info->l_data.vlan.vlan_id;
+		if (f_info->l_data.vlan.tpid_valid)
+			vlan_tpid = f_info->l_data.vlan.tpid;
 		if (f_info->fltr_act == ICE_FWD_TO_VSI ||
 		    f_info->fltr_act == ICE_FWD_TO_VSI_LIST) {
 			act |= ICE_SINGLE_ACT_PRUNE;
@@ -1653,6 +1714,8 @@ ice_fill_sw_rule(struct ice_hw *hw, struct ice_fltr_info *f_info,
 	if (!(vlan_id > ICE_MAX_VLAN_ID)) {
 		off = (__force __be16 *)(eth_hdr + ICE_ETH_VLAN_TCI_OFFSET);
 		*off = cpu_to_be16(vlan_id);
+		off = (__force __be16 *)(eth_hdr + ICE_ETH_ETHTYPE_OFFSET);
+		*off = cpu_to_be16(vlan_tpid);
 	}
 
 	/* Create the switch rule with the final dummy Ethernet header */
@@ -3868,6 +3931,23 @@ ice_find_recp(struct ice_hw *hw, struct ice_prot_lkup_ext *lkup_exts,
 }
 
 /**
+ * ice_change_proto_id_to_dvm - change proto id in prot_id_tbl
+ *
+ * As protocol id for outer vlan is different in dvm and svm, if dvm is
+ * supported protocol array record for outer vlan has to be modified to
+ * reflect the value proper for DVM.
+ */
+void ice_change_proto_id_to_dvm(void)
+{
+	u8 i;
+
+	for (i = 0; i < ARRAY_SIZE(ice_prot_id_tbl); i++)
+		if (ice_prot_id_tbl[i].type == ICE_VLAN_OFOS &&
+		    ice_prot_id_tbl[i].protocol_id != ICE_VLAN_OF_HW)
+			ice_prot_id_tbl[i].protocol_id = ICE_VLAN_OF_HW;
+}
+
+/**
  * ice_prot_type_to_id - get protocol ID from protocol type
  * @type: protocol type
  * @id: pointer to variable that will receive the ID