Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Wrap datapath globals into net_aligned_data, to avoid false sharing

   - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

   - Add SO_INQ and SCM_INQ support to AF_UNIX

   - Add SIOCINQ support to AF_VSOCK

   - Add TCP_MAXSEG sockopt to MPTCP

   - Add IPv6 force_forwarding sysctl to enable forwarding per interface

   - Make TCP validation of whether packet fully fits in the receive
     window and the rcv_buf more strict. With increased use of HW
     aggregation a single "packet" can be multiple 100s of kB

   - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
     improves latency up to 33% for sockmap users

   - Convert TCP send queue handling from tasklet to BH workque

   - Improve BPF iteration over TCP sockets to see each socket exactly
     once

   - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

   - Support enabling kernel threads for NAPI processing on per-NAPI
     instance basis rather than a whole device. Fully stop the kernel
     NAPI thread when threaded NAPI gets disabled. Previously thread
     would stick around until ifdown due to tricky synchronization

   - Allow multicast routing to take effect on locally-generated packets

   - Add output interface argument for End.X in segment routing

   - MCTP: add support for gateway routing, improve bind() handling

   - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

   - Add a new neighbor flag ("extern_valid"), which cedes refresh
     responsibilities to userspace. This is needed for EVPN multi-homing
     where a neighbor entry for a multi-homed host needs to be synced
     across all the VTEPs among which the host is multi-homed

   - Support NUD_PERMANENT for proxy neighbor entries

   - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

   - Add sequence numbers to netconsole messages. Unregister
     netconsole's console when all net targets are removed. Code
     refactoring. Add a number of selftests

   - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
     should be used for an inbound SA lookup

   - Support inspecting ref_tracker state via DebugFS

   - Don't force bonding advertisement frames tx to ~333 ms boundaries.
     Add broadcast_neighbor option to send ARP/ND on all bonded links

   - Allow providing upcall pid for the 'execute' command in openvswitch

   - Remove DCCP support from Netfilter's conntrack

   - Disallow multiple packet duplications in the queuing layer

   - Prevent use of deprecated iptables code on PREEMPT_RT

  Driver API:

   - Support RSS and hashing configuration over ethtool Netlink

   - Add dedicated ethtool callbacks for getting and setting hashing
     fields

   - Add support for power budget evaluation strategy in PSE /
     Power-over-Ethernet. Generate Netlink events for overcurrent etc

   - Support DPLL phase offset monitoring across all device inputs.
     Support providing clock reference and SYNC over separate DPLL
     inputs

   - Support traffic classes in devlink rate API for bandwidth
     management

   - Remove rtnl_lock dependency from UDP tunnel port configuration

  Device drivers:

   - Add a new Broadcom driver for 800G Ethernet (bnge)

   - Add a standalone driver for Microchip ZL3073x DPLL

   - Remove IBM's NETIUCV device driver

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support zero-copy Tx of DMABUF memory
         - take page size into account for page pool recycling rings
      - Intel (100G, ice, idpf):
         - idpf: XDP and AF_XDP support preparations
         - idpf: add flow steering
         - add link_down_events statistic
         - clean up the TSPLL code
         - preparations for live VM migration
      - nVidia/Mellanox:
         - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
         - optimize context memory usage for matchers
         - expose serial numbers in devlink info
         - support PCIe congestion metrics
      - Meta (fbnic):
         - add 25G, 50G, and 100G link modes to phylink
         - support dumping FW logs
      - Marvell/Cavium:
         - support for CN20K generation of the Octeon chips
      - Amazon:
         - add HW clock (without timestamping, just hypervisor time access)

   - Ethernet virtual:
      - VirtIO net:
         - support segmentation of UDP-tunnel-encapsulated packets
      - Google (gve):
         - support packet timestamping and clock synchronization
      - Microsoft vNIC:
         - add handler for device-originated servicing events
         - allow dynamic MSI-X vector allocation
         - support Tx bandwidth clamping

   - Ethernet NICs consumer, and embedded:
      - AMD:
         - amd-xgbe: hardware timestamping and PTP clock support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - use napi_complete_done() return value to support NAPI polling
         - add support for re-starting auto-negotiation
      - Broadcom switches (b53):
         - support BCM5325 switches
         - add bcm63xx EPHY power control
      - Synopsys (stmmac):
         - lots of code refactoring and cleanups
      - TI:
         - icssg-prueth: read firmware-names from device tree
         - icssg: PRP offload support
      - Microchip:
         - lan78xx: convert to PHYLINK for improved PHY and MAC management
         - ksz: add KSZ8463 switch support
      - Intel:
         - support similar queue priority scheme in multi-queue and
           time-sensitive networking (taprio)
         - support packet pre-emption in both
      - RealTek (r8169):
         - enable EEE at 5Gbps on RTL8126
      - Airoha:
         - add PPPoE offload support
         - MDIO bus controller for Airoha AN7583

   - Ethernet PHYs:
      - support for the IPQ5018 internal GE PHY
      - micrel KSZ9477 switch-integrated PHYs:
         - add MDI/MDI-X control support
         - add RX error counters
         - add cable test support
         - add Signal Quality Indicator (SQI) reporting
      - dp83tg720: improve reset handling and reduce link recovery time
      - support bcm54811 (and its MII-Lite interface type)
      - air_en8811h: support resume/suspend
      - support PHY counters for QCA807x and QCA808x
      - support WoL for QCA807x

   - CAN drivers:
      - rcar_canfd: support for Transceiver Delay Compensation
      - kvaser: report FW versions via devlink dev info

   - WiFi:
      - extended regulatory info support (6 GHz)
      - add statistics and beacon monitor for Multi-Link Operation (MLO)
      - support S1G aggregation, improve S1G support
      - add Radio Measurement action fields
      - support per-radio RTS threshold
      - some work around how FIPS affects wifi, which was wrong (RC4 is
        used by TKIP, not only WEP)
      - improvements for unsolicited probe response handling

   - WiFi drivers:
      - RealTek (rtw88):
         - IBSS mode for SDIO devices
      - RealTek (rtw89):
         - BT coexistence for MLO/WiFi7
         - concurrent station + P2P support
         - support for USB devices RTL8851BU/RTL8852BU
      - Intel (iwlwifi):
         - use embedded PNVM in (to be released) FW images to fix
           compatibility issues
         - many cleanups (unused FW APIs, PCIe code, WoWLAN)
         - some FIPS interoperability
      - MediaTek (mt76):
         - firmware recovery improvements
         - more MLO work
      - Qualcomm/Atheros (ath12k):
         - fix scan on multi-radio devices
         - more EHT/Wi-Fi 7 features
         - encapsulation/decapsulation offload
      - Broadcom (brcm80211):
         - support SDIO 43751 device

   - Bluetooth:
      - hci_event: add support for handling LE BIG Sync Lost event
      - ISO: add socket option to report packet seqnum via CMSG
      - ISO: support SCM_TIMESTAMPING for ISO TS

   - Bluetooth drivers:
      - intel_pcie: support Function Level Reset
      - nxpuart: add support for 4M baudrate
      - nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
  dpll: zl3073x: Fix build failure
  selftests: bpf: fix legacy netfilter options
  ipv6: annotate data-races around rt->fib6_nsiblings
  ipv6: fix possible infinite loop in fib6_info_uses_dev()
  ipv6: prevent infinite loop in rt6_nlmsg_size()
  ipv6: add a retry logic in net6_rt_notify()
  vrf: Drop existing dst reference in vrf_ip6_input_dst
  net/sched: taprio: align entry index attr validation with mqprio
  net: fsl_pq_mdio: use dev_err_probe
  selftests: rtnetlink.sh: remove esp4_offload after test
  vsock: remove unnecessary null check in vsock_getname()
  igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
  stmmac: xsk: fix negative overflow of budget in zerocopy mode
  dt-bindings: ieee802154: Convert at86rf230.txt yaml format
  net: dsa: microchip: Disable PTP function of KSZ8463
  net: dsa: microchip: Setup fiber ports for KSZ8463
  net: dsa: microchip: Write switch MAC address differently for KSZ8463
  net: dsa: microchip: Use different registers for KSZ8463
  net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
  dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
  ...

1 files changed, 72 insertions, 15 deletions

diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.c b/drivers/net/ethernet/intel/ice/ice_txrx.c
index 0e5107fe62ad..29e0088ab6b2 100644
--- a/drivers/net/ethernet/intel/ice/ice_txrx.c
+++ b/drivers/net/ethernet/intel/ice/ice_txrx.c
@@ -20,7 +20,6 @@
 
 #define ICE_RX_HDR_SIZE		256
 
-#define FDIR_DESC_RXDID 0x40
 #define ICE_FDIR_CLEAN_DELAY 10
 
 /**
@@ -707,6 +706,37 @@ ice_alloc_mapped_page(struct ice_rx_ring *rx_ring, struct ice_rx_buf *bi)
 }
 
 /**
+ * ice_init_ctrl_rx_descs - Initialize Rx descriptors for control vsi.
+ * @rx_ring: ring to init descriptors on
+ * @count: number of descriptors to initialize
+ */
+void ice_init_ctrl_rx_descs(struct ice_rx_ring *rx_ring, u32 count)
+{
+	union ice_32b_rx_flex_desc *rx_desc;
+	u32 ntu = rx_ring->next_to_use;
+
+	if (!count)
+		return;
+
+	rx_desc = ICE_RX_DESC(rx_ring, ntu);
+
+	do {
+		rx_desc++;
+		ntu++;
+		if (unlikely(ntu == rx_ring->count)) {
+			rx_desc = ICE_RX_DESC(rx_ring, 0);
+			ntu = 0;
+		}
+
+		rx_desc->wb.status_error0 = 0;
+		count--;
+	} while (count);
+
+	if (rx_ring->next_to_use != ntu)
+		ice_release_rx_desc(rx_ring, ntu);
+}
+
+/**
  * ice_alloc_rx_bufs - Replace used receive buffers
  * @rx_ring: ring to place buffers on
  * @cleaned_count: number of buffers to replace
@@ -726,8 +756,7 @@ bool ice_alloc_rx_bufs(struct ice_rx_ring *rx_ring, unsigned int cleaned_count)
 	struct ice_rx_buf *bi;
 
 	/* do nothing if no valid netdev defined */
-	if ((!rx_ring->netdev && rx_ring->vsi->type != ICE_VSI_CTRL) ||
-	    !cleaned_count)
+	if (!rx_ring->netdev || !cleaned_count)
 		return false;
 
 	/* get the Rx descriptor and buffer based on next_to_use */
@@ -1184,6 +1213,45 @@ static void ice_put_rx_mbuf(struct ice_rx_ring *rx_ring, struct xdp_buff *xdp,
 }
 
 /**
+ * ice_clean_ctrl_rx_irq - Clean descriptors from flow director Rx ring
+ * @rx_ring: Rx descriptor ring for ctrl_vsi to transact packets on
+ *
+ * This function cleans Rx descriptors from the ctrl_vsi Rx ring used
+ * to set flow director rules on VFs.
+ */
+void ice_clean_ctrl_rx_irq(struct ice_rx_ring *rx_ring)
+{
+	u32 ntc = rx_ring->next_to_clean;
+	unsigned int total_rx_pkts = 0;
+	u32 cnt = rx_ring->count;
+
+	while (likely(total_rx_pkts < ICE_DFLT_IRQ_WORK)) {
+		struct ice_vsi *ctrl_vsi = rx_ring->vsi;
+		union ice_32b_rx_flex_desc *rx_desc;
+		u16 stat_err_bits;
+
+		rx_desc = ICE_RX_DESC(rx_ring, ntc);
+
+		stat_err_bits = BIT(ICE_RX_FLEX_DESC_STATUS0_DD_S);
+		if (!ice_test_staterr(rx_desc->wb.status_error0, stat_err_bits))
+			break;
+
+		dma_rmb();
+
+		if (ctrl_vsi->vf)
+			ice_vc_fdir_irq_handler(ctrl_vsi, rx_desc);
+
+		if (++ntc == cnt)
+			ntc = 0;
+		total_rx_pkts++;
+	}
+
+	rx_ring->first_desc = ntc;
+	rx_ring->next_to_clean = ntc;
+	ice_init_ctrl_rx_descs(rx_ring, ICE_RX_DESC_UNUSED(rx_ring));
+}
+
+/**
  * ice_clean_rx_irq - Clean completed descriptors from Rx ring - bounce buf
  * @rx_ring: Rx descriptor ring to transact packets on
  * @budget: Total limit on number of packets to process
@@ -1195,7 +1263,7 @@ static void ice_put_rx_mbuf(struct ice_rx_ring *rx_ring, struct xdp_buff *xdp,
  *
  * Returns amount of work completed
  */
-int ice_clean_rx_irq(struct ice_rx_ring *rx_ring, int budget)
+static int ice_clean_rx_irq(struct ice_rx_ring *rx_ring, int budget)
 {
 	unsigned int total_rx_bytes = 0, total_rx_pkts = 0;
 	unsigned int offset = rx_ring->rx_offset;
@@ -1242,17 +1310,6 @@ int ice_clean_rx_irq(struct ice_rx_ring *rx_ring, int budget)
 		dma_rmb();
 
 		ice_trace(clean_rx_irq, rx_ring, rx_desc);
-		if (rx_desc->wb.rxdid == FDIR_DESC_RXDID || !rx_ring->netdev) {
-			struct ice_vsi *ctrl_vsi = rx_ring->vsi;
-
-			if (rx_desc->wb.rxdid == FDIR_DESC_RXDID &&
-			    ctrl_vsi->vf)
-				ice_vc_fdir_irq_handler(ctrl_vsi, rx_desc);
-			if (++ntc == cnt)
-				ntc = 0;
-			rx_ring->first_desc = ntc;
-			continue;
-		}
 
 		size = le16_to_cpu(rx_desc->wb.pkt_len) &
 			ICE_RX_FLX_DESC_PKT_LEN_M;