Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov.

 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J
    Benniston.

 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn
    Mork.

 4) BPF now has a "random" opcode, from Chema Gonzalez.

 5) Add more BPF documentation and improve test framework, from Daniel
    Borkmann.

 6) Support TCP fastopen over ipv6, from Daniel Lee.

 7) Add software TSO helper functions and use them to support software
    TSO in mvneta and mv643xx_eth drivers.  From Ezequiel Garcia.

 8) Support software TSO in fec driver too, from Nimrod Andy.

 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli.

10) Handle broadcasts more gracefully over macvlan when there are large
    numbers of interfaces configured, from Herbert Xu.

11) Allow more control over fwmark used for non-socket based responses,
    from Lorenzo Colitti.

12) Do TCP congestion window limiting based upon measurements, from Neal
    Cardwell.

13) Support busy polling in SCTP, from Neal Horman.

14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru.

15) Bridge promisc mode handling improvements from Vlad Yasevich.

16) Don't use inetpeer entries to implement ID generation any more, it
    performs poorly, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits)
  rtnetlink: fix userspace API breakage for iproute2 < v3.9.0
  tcp: fixing TLP's FIN recovery
  net: fec: Add software TSO support
  net: fec: Add Scatter/gather support
  net: fec: Increase buffer descriptor entry number
  net: fec: Factorize feature setting
  net: fec: Enable IP header hardware checksum
  net: fec: Factorize the .xmit transmit function
  bridge: fix compile error when compiling without IPv6 support
  bridge: fix smatch warning / potential null pointer dereference
  via-rhine: fix full-duplex with autoneg disable
  bnx2x: Enlarge the dorq threshold for VFs
  bnx2x: Check for UNDI in uncommon branch
  bnx2x: Fix 1G-baseT link
  bnx2x: Fix link for KR with swapped polarity lane
  sctp: Fix sk_ack_backlog wrap-around problem
  net/core: Add VF link state control policy
  net/fsl: xgmac_mdio is dependent on OF_MDIO
  net/fsl: Make xgmac_mdio read error message useful
  net_sched: drr: warn when qdisc is not work conserving
  ...

1 files changed, 34 insertions, 34 deletions

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
index a76af8e28a04..ff68b7a9deff 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
@@ -67,7 +67,7 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
 			if (mdio45_probe(&hw->phy.mdio, phy_addr) == 0) {
 				ixgbe_get_phy_id(hw);
 				hw->phy.type =
-				        ixgbe_get_phy_type_from_id(hw->phy.id);
+					ixgbe_get_phy_type_from_id(hw->phy.id);
 
 				if (hw->phy.type == ixgbe_phy_unknown) {
 					hw->phy.ops.read_reg(hw,
@@ -136,12 +136,12 @@ static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
 	u16 phy_id_low = 0;
 
 	status = hw->phy.ops.read_reg(hw, MDIO_DEVID1, MDIO_MMD_PMAPMD,
-	                              &phy_id_high);
+				      &phy_id_high);
 
 	if (status == 0) {
 		hw->phy.id = (u32)(phy_id_high << 16);
 		status = hw->phy.ops.read_reg(hw, MDIO_DEVID2, MDIO_MMD_PMAPMD,
-		                              &phy_id_low);
+					      &phy_id_low);
 		hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK);
 		hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK);
 	}
@@ -318,7 +318,7 @@ s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
  *  @phy_data: Pointer to read data from PHY register
  **/
 s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
-                               u32 device_type, u16 *phy_data)
+			       u32 device_type, u16 *phy_data)
 {
 	s32 status;
 	u16 gssr;
@@ -421,7 +421,7 @@ s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr,
  *  @phy_data: Data to write to the PHY register
  **/
 s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
-                                u32 device_type, u16 phy_data)
+				u32 device_type, u16 phy_data)
 {
 	s32 status;
 	u16 gssr;
@@ -548,8 +548,8 @@ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
  *  @speed: new link speed
  **/
 s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
-                                       ixgbe_link_speed speed,
-                                       bool autoneg_wait_to_complete)
+				       ixgbe_link_speed speed,
+				       bool autoneg_wait_to_complete)
 {
 
 	/*
@@ -582,8 +582,8 @@ s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
  * Determines the link capabilities by reading the AUTOC register.
  */
 s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
-                                               ixgbe_link_speed *speed,
-                                               bool *autoneg)
+					       ixgbe_link_speed *speed,
+					       bool *autoneg)
 {
 	s32 status = IXGBE_ERR_LINK_SETUP;
 	u16 speed_ability;
@@ -592,7 +592,7 @@ s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
 	*autoneg = true;
 
 	status = hw->phy.ops.read_reg(hw, MDIO_SPEED, MDIO_MMD_PMAPMD,
-	                              &speed_ability);
+				      &speed_ability);
 
 	if (status == 0) {
 		if (speed_ability & MDIO_SPEED_10G)
@@ -806,11 +806,11 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
 
 	/* reset the PHY and poll for completion */
 	hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS,
-	                      (phy_data | MDIO_CTRL1_RESET));
+			      (phy_data | MDIO_CTRL1_RESET));
 
 	for (i = 0; i < 100; i++) {
 		hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS,
-		                     &phy_data);
+				     &phy_data);
 		if ((phy_data & MDIO_CTRL1_RESET) == 0)
 			break;
 		usleep_range(10000, 20000);
@@ -824,7 +824,7 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
 
 	/* Get init offsets */
 	ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
-	                                              &data_offset);
+						      &data_offset);
 	if (ret_val != 0)
 		goto out;
 
@@ -838,7 +838,7 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
 		if (ret_val)
 			goto err_eeprom;
 		control = (eword & IXGBE_CONTROL_MASK_NL) >>
-		           IXGBE_CONTROL_SHIFT_NL;
+			   IXGBE_CONTROL_SHIFT_NL;
 		edata = eword & IXGBE_DATA_MASK_NL;
 		switch (control) {
 		case IXGBE_DELAY_NL:
@@ -859,7 +859,7 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
 				if (ret_val)
 					goto err_eeprom;
 				hw->phy.ops.write_reg(hw, phy_offset,
-				                      MDIO_MMD_PMAPMD, eword);
+						      MDIO_MMD_PMAPMD, eword);
 				hw_dbg(hw, "Wrote %4.4x to %4.4x\n", eword,
 				       phy_offset);
 				data_offset++;
@@ -1010,10 +1010,10 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 			if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) {
 				if (hw->bus.lan_id == 0)
 					hw->phy.sfp_type =
-					             ixgbe_sfp_type_da_cu_core0;
+						     ixgbe_sfp_type_da_cu_core0;
 				else
 					hw->phy.sfp_type =
-					             ixgbe_sfp_type_da_cu_core1;
+						     ixgbe_sfp_type_da_cu_core1;
 			} else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) {
 				hw->phy.ops.read_i2c_eeprom(
 						hw, IXGBE_SFF_CABLE_SPEC_COMP,
@@ -1035,10 +1035,10 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 				    IXGBE_SFF_10GBASELR_CAPABLE)) {
 				if (hw->bus.lan_id == 0)
 					hw->phy.sfp_type =
-					              ixgbe_sfp_type_srlr_core0;
+						      ixgbe_sfp_type_srlr_core0;
 				else
 					hw->phy.sfp_type =
-					              ixgbe_sfp_type_srlr_core1;
+						      ixgbe_sfp_type_srlr_core1;
 			} else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) {
 				if (hw->bus.lan_id == 0)
 					hw->phy.sfp_type =
@@ -1087,15 +1087,15 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 				goto err_read_i2c_eeprom;
 
 			status = hw->phy.ops.read_i2c_eeprom(hw,
-			                            IXGBE_SFF_VENDOR_OUI_BYTE1,
-			                            &oui_bytes[1]);
+						    IXGBE_SFF_VENDOR_OUI_BYTE1,
+						    &oui_bytes[1]);
 
 			if (status != 0)
 				goto err_read_i2c_eeprom;
 
 			status = hw->phy.ops.read_i2c_eeprom(hw,
-			                            IXGBE_SFF_VENDOR_OUI_BYTE2,
-			                            &oui_bytes[2]);
+						    IXGBE_SFF_VENDOR_OUI_BYTE2,
+						    &oui_bytes[2]);
 
 			if (status != 0)
 				goto err_read_i2c_eeprom;
@@ -1403,8 +1403,8 @@ err_read_i2c_eeprom:
  *  so it returns the offsets to the phy init sequence block.
  **/
 s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
-                                        u16 *list_offset,
-                                        u16 *data_offset)
+					u16 *list_offset,
+					u16 *data_offset)
 {
 	u16 sfp_id;
 	u16 sfp_type = hw->phy.sfp_type;
@@ -1493,11 +1493,11 @@ err_phy:
  *  Performs byte read operation to SFP module's EEPROM over I2C interface.
  **/
 s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
-                                  u8 *eeprom_data)
+				  u8 *eeprom_data)
 {
 	return hw->phy.ops.read_i2c_byte(hw, byte_offset,
-	                                 IXGBE_I2C_EEPROM_DEV_ADDR,
-	                                 eeprom_data);
+					 IXGBE_I2C_EEPROM_DEV_ADDR,
+					 eeprom_data);
 }
 
 /**
@@ -1525,11 +1525,11 @@ s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset,
  *  Performs byte write operation to SFP module's EEPROM over I2C interface.
  **/
 s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
-                                   u8 eeprom_data)
+				   u8 eeprom_data)
 {
 	return hw->phy.ops.write_i2c_byte(hw, byte_offset,
-	                                  IXGBE_I2C_EEPROM_DEV_ADDR,
-	                                  eeprom_data);
+					  IXGBE_I2C_EEPROM_DEV_ADDR,
+					  eeprom_data);
 }
 
 /**
@@ -1542,7 +1542,7 @@ s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
  *  a specified device address.
  **/
 s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
-                                u8 dev_addr, u8 *data)
+				u8 dev_addr, u8 *data)
 {
 	s32 status = 0;
 	u32 max_retry = 10;
@@ -1631,7 +1631,7 @@ read_byte_out:
  *  a specified device address.
  **/
 s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
-                                 u8 dev_addr, u8 data)
+				 u8 dev_addr, u8 data)
 {
 	s32 status = 0;
 	u32 max_retry = 1;
@@ -2046,7 +2046,7 @@ s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw)
 
 	/* Check that the LASI temp alarm status was triggered */
 	hw->phy.ops.read_reg(hw, IXGBE_TN_LASI_STATUS_REG,
-	                     MDIO_MMD_PMAPMD, &phy_data);
+			     MDIO_MMD_PMAPMD, &phy_data);
 
 	if (!(phy_data & IXGBE_TN_LASI_STATUS_TEMP_ALARM))
 		goto out;