Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini
      Varadhan.

   2) Simplify classifier state on sk_buff in order to shrink it a bit.
      From Willem de Bruijn.

   3) Introduce SIPHASH and it's usage for secure sequence numbers and
      syncookies. From Jason A. Donenfeld.

   4) Reduce CPU usage for ICMP replies we are going to limit or
      suppress, from Jesper Dangaard Brouer.

   5) Introduce Shared Memory Communications socket layer, from Ursula
      Braun.

   6) Add RACK loss detection and allow it to actually trigger fast
      recovery instead of just assisting after other algorithms have
      triggered it. From Yuchung Cheng.

   7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot.

   8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert.

   9) Export MPLS packet stats via netlink, from Robert Shearman.

  10) Significantly improve inet port bind conflict handling, especially
      when an application is restarted and changes it's setting of
      reuseport. From Josef Bacik.

  11) Implement TX batching in vhost_net, from Jason Wang.

  12) Extend the dummy device so that VF (virtual function) features,
      such as configuration, can be more easily tested. From Phil
      Sutter.

  13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric
      Dumazet.

  14) Add new bpf MAP, implementing a longest prefix match trie. From
      Daniel Mack.

  15) Packet sample offloading support in mlxsw driver, from Yotam Gigi.

  16) Add new aquantia driver, from David VomLehn.

  17) Add bpf tracepoints, from Daniel Borkmann.

  18) Add support for port mirroring to b53 and bcm_sf2 drivers, from
      Florian Fainelli.

  19) Remove custom busy polling in many drivers, it is done in the core
      networking since 4.5 times. From Eric Dumazet.

  20) Support XDP adjust_head in virtio_net, from John Fastabend.

  21) Fix several major holes in neighbour entry confirmation, from
      Julian Anastasov.

  22) Add XDP support to bnxt_en driver, from Michael Chan.

  23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan.

  24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi.

  25) Support GRO in IPSEC protocols, from Steffen Klassert"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits)
  Revert "ath10k: Search SMBIOS for OEM board file extension"
  net: socket: fix recvmmsg not returning error from sock_error
  bnxt_en: use eth_hw_addr_random()
  bpf: fix unlocking of jited image when module ronx not set
  arch: add ARCH_HAS_SET_MEMORY config
  net: napi_watchdog() can use napi_schedule_irqoff()
  tcp: Revert "tcp: tcp_probe: use spin_lock_bh()"
  net/hsr: use eth_hw_addr_random()
  net: mvpp2: enable building on 64-bit platforms
  net: mvpp2: switch to build_skb() in the RX path
  net: mvpp2: simplify MVPP2_PRS_RI_* definitions
  net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT
  net: mvpp2: remove unused register definitions
  net: mvpp2: simplify mvpp2_bm_bufs_add()
  net: mvpp2: drop useless fields in mvpp2_bm_pool and related code
  net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue'
  net: mvpp2: release reference to txq_cpu[] entry after unmapping
  net: mvpp2: handle too large value in mvpp2_rx_time_coal_set()
  net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set()
  net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set
  ...

6 files changed, 134 insertions, 118 deletions

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
index bdbcd2b088a0..99b187bfdd55 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
@@ -3252,12 +3252,13 @@ out:
 	return config;
 }
 
-int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter,
-			     struct ethtool_cmd *ecmd)
+int qlcnic_83xx_get_link_ksettings(struct qlcnic_adapter *adapter,
+				   struct ethtool_link_ksettings *ecmd)
 {
 	struct qlcnic_hardware_context *ahw = adapter->ahw;
 	u32 config = 0;
 	int status = 0;
+	u32 supported, advertising;
 
 	if (!test_bit(__QLCNIC_MAINTENANCE_MODE, &adapter->state)) {
 		/* Get port configuration info */
@@ -3271,45 +3272,48 @@ int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter,
 	ahw->board_type = QLCNIC_BRDTYPE_83XX_10G;
 
 	if (netif_running(adapter->netdev) && ahw->has_link_events) {
-		ethtool_cmd_speed_set(ecmd, ahw->link_speed);
-		ecmd->duplex = ahw->link_duplex;
-		ecmd->autoneg = ahw->link_autoneg;
+		ecmd->base.speed = ahw->link_speed;
+		ecmd->base.duplex = ahw->link_duplex;
+		ecmd->base.autoneg = ahw->link_autoneg;
 	} else {
-		ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
-		ecmd->duplex = DUPLEX_UNKNOWN;
-		ecmd->autoneg = AUTONEG_DISABLE;
+		ecmd->base.speed = SPEED_UNKNOWN;
+		ecmd->base.duplex = DUPLEX_UNKNOWN;
+		ecmd->base.autoneg = AUTONEG_DISABLE;
 	}
 
-	ecmd->supported = (SUPPORTED_10baseT_Full |
+	supported = (SUPPORTED_10baseT_Full |
 			   SUPPORTED_100baseT_Full |
 			   SUPPORTED_1000baseT_Full |
 			   SUPPORTED_10000baseT_Full |
 			   SUPPORTED_Autoneg);
 
-	if (ecmd->autoneg == AUTONEG_ENABLE) {
+	ethtool_convert_link_mode_to_legacy_u32(&advertising,
+						ecmd->link_modes.advertising);
+
+	if (ecmd->base.autoneg == AUTONEG_ENABLE) {
 		if (ahw->port_config & QLC_83XX_10_CAPABLE)
-			ecmd->advertising |= SUPPORTED_10baseT_Full;
+			advertising |= SUPPORTED_10baseT_Full;
 		if (ahw->port_config & QLC_83XX_100_CAPABLE)
-			ecmd->advertising |= SUPPORTED_100baseT_Full;
+			advertising |= SUPPORTED_100baseT_Full;
 		if (ahw->port_config & QLC_83XX_1G_CAPABLE)
-			ecmd->advertising |= SUPPORTED_1000baseT_Full;
+			advertising |= SUPPORTED_1000baseT_Full;
 		if (ahw->port_config & QLC_83XX_10G_CAPABLE)
-			ecmd->advertising |= SUPPORTED_10000baseT_Full;
+			advertising |= SUPPORTED_10000baseT_Full;
 		if (ahw->port_config & QLC_83XX_AUTONEG_ENABLE)
-			ecmd->advertising |= ADVERTISED_Autoneg;
+			advertising |= ADVERTISED_Autoneg;
 	} else {
 		switch (ahw->link_speed) {
 		case SPEED_10:
-			ecmd->advertising = SUPPORTED_10baseT_Full;
+			advertising = SUPPORTED_10baseT_Full;
 			break;
 		case SPEED_100:
-			ecmd->advertising = SUPPORTED_100baseT_Full;
+			advertising = SUPPORTED_100baseT_Full;
 			break;
 		case SPEED_1000:
-			ecmd->advertising = SUPPORTED_1000baseT_Full;
+			advertising = SUPPORTED_1000baseT_Full;
 			break;
 		case SPEED_10000:
-			ecmd->advertising = SUPPORTED_10000baseT_Full;
+			advertising = SUPPORTED_10000baseT_Full;
 			break;
 		default:
 			break;
@@ -3319,56 +3323,58 @@ int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter,
 
 	switch (ahw->supported_type) {
 	case PORT_FIBRE:
-		ecmd->supported |= SUPPORTED_FIBRE;
-		ecmd->advertising |= ADVERTISED_FIBRE;
-		ecmd->port = PORT_FIBRE;
-		ecmd->transceiver = XCVR_EXTERNAL;
+		supported |= SUPPORTED_FIBRE;
+		advertising |= ADVERTISED_FIBRE;
+		ecmd->base.port = PORT_FIBRE;
 		break;
 	case PORT_TP:
-		ecmd->supported |= SUPPORTED_TP;
-		ecmd->advertising |= ADVERTISED_TP;
-		ecmd->port = PORT_TP;
-		ecmd->transceiver = XCVR_INTERNAL;
+		supported |= SUPPORTED_TP;
+		advertising |= ADVERTISED_TP;
+		ecmd->base.port = PORT_TP;
 		break;
 	case PORT_DA:
-		ecmd->supported |= SUPPORTED_FIBRE;
-		ecmd->advertising |= ADVERTISED_FIBRE;
-		ecmd->port = PORT_DA;
-		ecmd->transceiver = XCVR_EXTERNAL;
+		supported |= SUPPORTED_FIBRE;
+		advertising |= ADVERTISED_FIBRE;
+		ecmd->base.port = PORT_DA;
 		break;
 	default:
-		ecmd->supported |= SUPPORTED_FIBRE;
-		ecmd->advertising |= ADVERTISED_FIBRE;
-		ecmd->port = PORT_OTHER;
-		ecmd->transceiver = XCVR_EXTERNAL;
+		supported |= SUPPORTED_FIBRE;
+		advertising |= ADVERTISED_FIBRE;
+		ecmd->base.port = PORT_OTHER;
 		break;
 	}
-	ecmd->phy_address = ahw->physical_port;
+	ecmd->base.phy_address = ahw->physical_port;
+
+	ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.supported,
+						supported);
+	ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.advertising,
+						advertising);
+
 	return status;
 }
 
-int qlcnic_83xx_set_settings(struct qlcnic_adapter *adapter,
-			     struct ethtool_cmd *ecmd)
+int qlcnic_83xx_set_link_ksettings(struct qlcnic_adapter *adapter,
+				   const struct ethtool_link_ksettings *ecmd)
 {
 	struct qlcnic_hardware_context *ahw = adapter->ahw;
 	u32 config = adapter->ahw->port_config;
 	int status = 0;
 
 	/* 83xx devices do not support Half duplex */
-	if (ecmd->duplex == DUPLEX_HALF) {
-			netdev_info(adapter->netdev,
-				    "Half duplex mode not supported\n");
-			return -EINVAL;
+	if (ecmd->base.duplex == DUPLEX_HALF) {
+		netdev_info(adapter->netdev,
+			    "Half duplex mode not supported\n");
+		return -EINVAL;
 	}
 
-	if (ecmd->autoneg) {
+	if (ecmd->base.autoneg) {
 		ahw->port_config |= QLC_83XX_AUTONEG_ENABLE;
 		ahw->port_config |= (QLC_83XX_100_CAPABLE |
 				     QLC_83XX_1G_CAPABLE |
 				     QLC_83XX_10G_CAPABLE);
 	} else { /* force speed */
 		ahw->port_config &= ~QLC_83XX_AUTONEG_ENABLE;
-		switch (ethtool_cmd_speed(ecmd)) {
+		switch (ecmd->base.speed) {
 		case SPEED_10:
 			ahw->port_config &= ~(QLC_83XX_100_CAPABLE |
 					      QLC_83XX_1G_CAPABLE |
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
index 331ae2c20f40..3dfe8e27b51c 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
@@ -628,8 +628,10 @@ int qlcnic_83xx_set_port_eswitch_status(struct qlcnic_adapter *, int, int *);
 void qlcnic_83xx_get_minidump_template(struct qlcnic_adapter *);
 void qlcnic_83xx_get_stats(struct qlcnic_adapter *adapter, u64 *data);
 int qlcnic_83xx_extend_md_capab(struct qlcnic_adapter *);
-int qlcnic_83xx_get_settings(struct qlcnic_adapter *, struct ethtool_cmd *);
-int qlcnic_83xx_set_settings(struct qlcnic_adapter *, struct ethtool_cmd *);
+int qlcnic_83xx_get_link_ksettings(struct qlcnic_adapter *adapter,
+				   struct ethtool_link_ksettings *ecmd);
+int qlcnic_83xx_set_link_ksettings(struct qlcnic_adapter *adapter,
+				   const struct ethtool_link_ksettings *ecmd);
 void qlcnic_83xx_get_pauseparam(struct qlcnic_adapter *,
 				struct ethtool_pauseparam *);
 int qlcnic_83xx_set_pauseparam(struct qlcnic_adapter *,
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
index daf05155b732..d344e9d43832 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
@@ -573,8 +573,10 @@ int qlcnic_alloc_hw_resources(struct qlcnic_adapter *adapter)
 		ptr = (__le32 *)dma_alloc_coherent(&pdev->dev, sizeof(u32),
 						   &tx_ring->hw_cons_phys_addr,
 						   GFP_KERNEL);
-		if (ptr == NULL)
-			return -ENOMEM;
+		if (ptr == NULL) {
+			err = -ENOMEM;
+			goto err_out_free;
+		}
 
 		tx_ring->hw_consumer = ptr;
 		/* cmd desc ring */
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
index 0a2318cad34d..9a869c15d8bf 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
@@ -285,42 +285,43 @@ qlcnic_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo)
 		sizeof(drvinfo->version));
 }
 
-static int qlcnic_82xx_get_settings(struct qlcnic_adapter *adapter,
-				    struct ethtool_cmd *ecmd)
+static int qlcnic_82xx_get_link_ksettings(struct qlcnic_adapter *adapter,
+					  struct ethtool_link_ksettings *ecmd)
 {
 	struct qlcnic_hardware_context *ahw = adapter->ahw;
 	u32 speed, reg;
 	int check_sfp_module = 0, err = 0;
 	u16 pcifn = ahw->pci_func;
+	u32 supported, advertising;
 
 	/* read which mode */
 	if (adapter->ahw->port_type == QLCNIC_GBE) {
-		ecmd->supported = (SUPPORTED_10baseT_Half |
+		supported = (SUPPORTED_10baseT_Half |
 				   SUPPORTED_10baseT_Full |
 				   SUPPORTED_100baseT_Half |
 				   SUPPORTED_100baseT_Full |
 				   SUPPORTED_1000baseT_Half |
 				   SUPPORTED_1000baseT_Full);
 
-		ecmd->advertising = (ADVERTISED_100baseT_Half |
+		advertising = (ADVERTISED_100baseT_Half |
 				     ADVERTISED_100baseT_Full |
 				     ADVERTISED_1000baseT_Half |
 				     ADVERTISED_1000baseT_Full);
 
-		ethtool_cmd_speed_set(ecmd, adapter->ahw->link_speed);
-		ecmd->duplex = adapter->ahw->link_duplex;
-		ecmd->autoneg = adapter->ahw->link_autoneg;
+		ecmd->base.speed = adapter->ahw->link_speed;
+		ecmd->base.duplex = adapter->ahw->link_duplex;
+		ecmd->base.autoneg = adapter->ahw->link_autoneg;
 
 	} else if (adapter->ahw->port_type == QLCNIC_XGBE) {
 		u32 val = 0;
 		val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR, &err);
 
 		if (val == QLCNIC_PORT_MODE_802_3_AP) {
-			ecmd->supported = SUPPORTED_1000baseT_Full;
-			ecmd->advertising = ADVERTISED_1000baseT_Full;
+			supported = SUPPORTED_1000baseT_Full;
+			advertising = ADVERTISED_1000baseT_Full;
 		} else {
-			ecmd->supported = SUPPORTED_10000baseT_Full;
-			ecmd->advertising = ADVERTISED_10000baseT_Full;
+			supported = SUPPORTED_10000baseT_Full;
+			advertising = ADVERTISED_10000baseT_Full;
 		}
 
 		if (netif_running(adapter->netdev) && ahw->has_link_events) {
@@ -331,73 +332,72 @@ static int qlcnic_82xx_get_settings(struct qlcnic_adapter *adapter,
 				ahw->link_speed = speed * P3P_LINK_SPEED_MHZ;
 			}
 
-			ethtool_cmd_speed_set(ecmd, ahw->link_speed);
-			ecmd->autoneg = ahw->link_autoneg;
-			ecmd->duplex = ahw->link_duplex;
+			ecmd->base.speed = ahw->link_speed;
+			ecmd->base.autoneg = ahw->link_autoneg;
+			ecmd->base.duplex = ahw->link_duplex;
 			goto skip;
 		}
 
-		ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
-		ecmd->duplex = DUPLEX_UNKNOWN;
-		ecmd->autoneg = AUTONEG_DISABLE;
+		ecmd->base.speed = SPEED_UNKNOWN;
+		ecmd->base.duplex = DUPLEX_UNKNOWN;
+		ecmd->base.autoneg = AUTONEG_DISABLE;
 	} else
 		return -EIO;
 
 skip:
-	ecmd->phy_address = adapter->ahw->physical_port;
-	ecmd->transceiver = XCVR_EXTERNAL;
+	ecmd->base.phy_address = adapter->ahw->physical_port;
 
 	switch (adapter->ahw->board_type) {
 	case QLCNIC_BRDTYPE_P3P_REF_QG:
 	case QLCNIC_BRDTYPE_P3P_4_GB:
 	case QLCNIC_BRDTYPE_P3P_4_GB_MM:
 
-		ecmd->supported |= SUPPORTED_Autoneg;
-		ecmd->advertising |= ADVERTISED_Autoneg;
+		supported |= SUPPORTED_Autoneg;
+		advertising |= ADVERTISED_Autoneg;
 	case QLCNIC_BRDTYPE_P3P_10G_CX4:
 	case QLCNIC_BRDTYPE_P3P_10G_CX4_LP:
 	case QLCNIC_BRDTYPE_P3P_10000_BASE_T:
-		ecmd->supported |= SUPPORTED_TP;
-		ecmd->advertising |= ADVERTISED_TP;
-		ecmd->port = PORT_TP;
-		ecmd->autoneg =  adapter->ahw->link_autoneg;
+		supported |= SUPPORTED_TP;
+		advertising |= ADVERTISED_TP;
+		ecmd->base.port = PORT_TP;
+		ecmd->base.autoneg =  adapter->ahw->link_autoneg;
 		break;
 	case QLCNIC_BRDTYPE_P3P_IMEZ:
 	case QLCNIC_BRDTYPE_P3P_XG_LOM:
 	case QLCNIC_BRDTYPE_P3P_HMEZ:
-		ecmd->supported |= SUPPORTED_MII;
-		ecmd->advertising |= ADVERTISED_MII;
-		ecmd->port = PORT_MII;
-		ecmd->autoneg = AUTONEG_DISABLE;
+		supported |= SUPPORTED_MII;
+		advertising |= ADVERTISED_MII;
+		ecmd->base.port = PORT_MII;
+		ecmd->base.autoneg = AUTONEG_DISABLE;
 		break;
 	case QLCNIC_BRDTYPE_P3P_10G_SFP_PLUS:
 	case QLCNIC_BRDTYPE_P3P_10G_SFP_CT:
 	case QLCNIC_BRDTYPE_P3P_10G_SFP_QT:
-		ecmd->advertising |= ADVERTISED_TP;
-		ecmd->supported |= SUPPORTED_TP;
+		advertising |= ADVERTISED_TP;
+		supported |= SUPPORTED_TP;
 		check_sfp_module = netif_running(adapter->netdev) &&
 				   ahw->has_link_events;
 	case QLCNIC_BRDTYPE_P3P_10G_XFP:
-		ecmd->supported |= SUPPORTED_FIBRE;
-		ecmd->advertising |= ADVERTISED_FIBRE;
-		ecmd->port = PORT_FIBRE;
-		ecmd->autoneg = AUTONEG_DISABLE;
+		supported |= SUPPORTED_FIBRE;
+		advertising |= ADVERTISED_FIBRE;
+		ecmd->base.port = PORT_FIBRE;
+		ecmd->base.autoneg = AUTONEG_DISABLE;
 		break;
 	case QLCNIC_BRDTYPE_P3P_10G_TP:
 		if (adapter->ahw->port_type == QLCNIC_XGBE) {
-			ecmd->autoneg = AUTONEG_DISABLE;
-			ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
-			ecmd->advertising |=
+			ecmd->base.autoneg = AUTONEG_DISABLE;
+			supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
+			advertising |=
 				(ADVERTISED_FIBRE | ADVERTISED_TP);
-			ecmd->port = PORT_FIBRE;
+			ecmd->base.port = PORT_FIBRE;
 			check_sfp_module = netif_running(adapter->netdev) &&
 					   ahw->has_link_events;
 		} else {
-			ecmd->autoneg = AUTONEG_ENABLE;
-			ecmd->supported |= (SUPPORTED_TP | SUPPORTED_Autoneg);
-			ecmd->advertising |=
+			ecmd->base.autoneg = AUTONEG_ENABLE;
+			supported |= (SUPPORTED_TP | SUPPORTED_Autoneg);
+			advertising |=
 				(ADVERTISED_TP | ADVERTISED_Autoneg);
-			ecmd->port = PORT_TP;
+			ecmd->base.port = PORT_TP;
 		}
 		break;
 	default:
@@ -412,47 +412,52 @@ skip:
 		case LINKEVENT_MODULE_OPTICAL_SRLR:
 		case LINKEVENT_MODULE_OPTICAL_LRM:
 		case LINKEVENT_MODULE_OPTICAL_SFP_1G:
-			ecmd->port = PORT_FIBRE;
+			ecmd->base.port = PORT_FIBRE;
 			break;
 		case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE:
 		case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN:
 		case LINKEVENT_MODULE_TWINAX:
-			ecmd->port = PORT_TP;
+			ecmd->base.port = PORT_TP;
 			break;
 		default:
-			ecmd->port = PORT_OTHER;
+			ecmd->base.port = PORT_OTHER;
 		}
 	}
 
+	ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.supported,
+						supported);
+	ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.advertising,
+						advertising);
+
 	return 0;
 }
 
-static int qlcnic_get_settings(struct net_device *dev,
-			       struct ethtool_cmd *ecmd)
+static int qlcnic_get_link_ksettings(struct net_device *dev,
+				     struct ethtool_link_ksettings *ecmd)
 {
 	struct qlcnic_adapter *adapter = netdev_priv(dev);
 
 	if (qlcnic_82xx_check(adapter))
-		return qlcnic_82xx_get_settings(adapter, ecmd);
+		return qlcnic_82xx_get_link_ksettings(adapter, ecmd);
 	else if (qlcnic_83xx_check(adapter))
-		return qlcnic_83xx_get_settings(adapter, ecmd);
+		return qlcnic_83xx_get_link_ksettings(adapter, ecmd);
 
 	return -EIO;
 }
 
 
 static int qlcnic_set_port_config(struct qlcnic_adapter *adapter,
-				  struct ethtool_cmd *ecmd)
+				  const struct ethtool_link_ksettings *ecmd)
 {
 	u32 ret = 0, config = 0;
 	/* read which mode */
-	if (ecmd->duplex)
+	if (ecmd->base.duplex)
 		config |= 0x1;
 
-	if (ecmd->autoneg)
+	if (ecmd->base.autoneg)
 		config |= 0x2;
 
-	switch (ethtool_cmd_speed(ecmd)) {
+	switch (ecmd->base.speed) {
 	case SPEED_10:
 		config |= (0 << 8);
 		break;
@@ -475,7 +480,8 @@ static int qlcnic_set_port_config(struct qlcnic_adapter *adapter,
 	return ret;
 }
 
-static int qlcnic_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+static int qlcnic_set_link_ksettings(struct net_device *dev,
+				     const struct ethtool_link_ksettings *ecmd)
 {
 	u32 ret = 0;
 	struct qlcnic_adapter *adapter = netdev_priv(dev);
@@ -484,16 +490,16 @@ static int qlcnic_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 		return -EOPNOTSUPP;
 
 	if (qlcnic_83xx_check(adapter))
-		ret = qlcnic_83xx_set_settings(adapter, ecmd);
+		ret = qlcnic_83xx_set_link_ksettings(adapter, ecmd);
 	else
 		ret = qlcnic_set_port_config(adapter, ecmd);
 
 	if (!ret)
 		return ret;
 
-	adapter->ahw->link_speed = ethtool_cmd_speed(ecmd);
-	adapter->ahw->link_duplex = ecmd->duplex;
-	adapter->ahw->link_autoneg = ecmd->autoneg;
+	adapter->ahw->link_speed = ecmd->base.speed;
+	adapter->ahw->link_duplex = ecmd->base.duplex;
+	adapter->ahw->link_autoneg = ecmd->base.autoneg;
 
 	if (!netif_running(dev))
 		return 0;
@@ -1822,8 +1828,6 @@ qlcnic_set_dump(struct net_device *netdev, struct ethtool_dump *val)
 }
 
 const struct ethtool_ops qlcnic_ethtool_ops = {
-	.get_settings = qlcnic_get_settings,
-	.set_settings = qlcnic_set_settings,
 	.get_drvinfo = qlcnic_get_drvinfo,
 	.get_regs_len = qlcnic_get_regs_len,
 	.get_regs = qlcnic_get_regs,
@@ -1850,10 +1854,11 @@ const struct ethtool_ops qlcnic_ethtool_ops = {
 	.get_dump_flag = qlcnic_get_dump_flag,
 	.get_dump_data = qlcnic_get_dump_data,
 	.set_dump = qlcnic_set_dump,
+	.get_link_ksettings = qlcnic_get_link_ksettings,
+	.set_link_ksettings = qlcnic_set_link_ksettings,
 };
 
 const struct ethtool_ops qlcnic_sriov_vf_ethtool_ops = {
-	.get_settings		= qlcnic_get_settings,
 	.get_drvinfo		= qlcnic_get_drvinfo,
 	.get_regs_len		= qlcnic_get_regs_len,
 	.get_regs		= qlcnic_get_regs,
@@ -1872,12 +1877,13 @@ const struct ethtool_ops qlcnic_sriov_vf_ethtool_ops = {
 	.set_coalesce		= qlcnic_set_intr_coalesce,
 	.set_msglevel		= qlcnic_set_msglevel,
 	.get_msglevel		= qlcnic_get_msglevel,
+	.get_link_ksettings	= qlcnic_get_link_ksettings,
 };
 
 const struct ethtool_ops qlcnic_ethtool_failed_ops = {
-	.get_settings		= qlcnic_get_settings,
 	.get_drvinfo		= qlcnic_get_drvinfo,
 	.set_msglevel		= qlcnic_set_msglevel,
 	.get_msglevel		= qlcnic_get_msglevel,
 	.set_dump		= qlcnic_set_dump,
+	.get_link_ksettings	= qlcnic_get_link_ksettings,
 };
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
index fedd7366713c..84dd83031a1b 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
@@ -975,7 +975,7 @@ static int qlcnic_poll(struct napi_struct *napi, int budget)
 		work_done = budget;
 
 	if (work_done < budget) {
-		napi_complete(&sds_ring->napi);
+		napi_complete_done(&sds_ring->napi, work_done);
 		if (test_bit(__QLCNIC_DEV_UP, &adapter->state)) {
 			qlcnic_enable_sds_intr(adapter, sds_ring);
 			qlcnic_enable_tx_intr(adapter, tx_ring);
@@ -1019,7 +1019,7 @@ static int qlcnic_rx_poll(struct napi_struct *napi, int budget)
 	work_done = qlcnic_process_rcv_ring(sds_ring, budget);
 
 	if (work_done < budget) {
-		napi_complete(&sds_ring->napi);
+		napi_complete_done(&sds_ring->napi, work_done);
 		if (test_bit(__QLCNIC_DEV_UP, &adapter->state))
 			qlcnic_enable_sds_intr(adapter, sds_ring);
 	}
@@ -1966,7 +1966,7 @@ static int qlcnic_83xx_msix_sriov_vf_poll(struct napi_struct *napi, int budget)
 		work_done = budget;
 
 	if (work_done < budget) {
-		napi_complete(&sds_ring->napi);
+		napi_complete_done(&sds_ring->napi, work_done);
 		qlcnic_enable_sds_intr(adapter, sds_ring);
 	}
 
@@ -1994,7 +1994,7 @@ static int qlcnic_83xx_poll(struct napi_struct *napi, int budget)
 		work_done = budget;
 
 	if (work_done < budget) {
-		napi_complete(&sds_ring->napi);
+		napi_complete_done(&sds_ring->napi, work_done);
 		qlcnic_enable_sds_intr(adapter, sds_ring);
 	}
 
@@ -2032,7 +2032,7 @@ static int qlcnic_83xx_rx_poll(struct napi_struct *napi, int budget)
 	adapter = sds_ring->adapter;
 	work_done = qlcnic_83xx_process_rcv_ring(sds_ring, budget);
 	if (work_done < budget) {
-		napi_complete(&sds_ring->napi);
+		napi_complete_done(&sds_ring->napi, work_done);
 		if (test_bit(__QLCNIC_DEV_UP, &adapter->state))
 			qlcnic_enable_sds_intr(adapter, sds_ring);
 	}
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 4c0cce962585..b6628aaa6e4a 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -4220,7 +4220,7 @@ recheck:
 	if (dev == NULL)
 		goto done;
 
-	if (dev->priv_flags & IFF_802_1Q_VLAN) {
+	if (is_vlan_dev(dev)) {
 		dev = vlan_dev_real_dev(dev);
 		goto recheck;
 	}
@@ -4256,7 +4256,7 @@ recheck:
 	if (dev == NULL)
 		goto done;
 
-	if (dev->priv_flags & IFF_802_1Q_VLAN) {
+	if (is_vlan_dev(dev)) {
 		dev = vlan_dev_real_dev(dev);
 		goto recheck;
 	}