Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next

John W. Linville says:

====================
pull request: wireless-next 2014-07-03

Please pull this first batch of wireless updates intended for the
3.17 stream...

For the mac80211 bits, Johannes says:

"The biggest thing here is probably Arik's TDLS rework, beyond that we
have smaller improvements and features like David's scanning IE thing,
Luca's queue work, some CSA work, etc. Also your PID rate control
removal, of course."

For the iwlwifi bits, Emmanuel says:

"I have here a whole bunch of various things. Andy contributes
better debug prints for dvm specific flows and a module parameter to
completely disable power save for dvm. Andrei is sharing the premises
of his work on CSA - more to come. Eran and Liad keep on working
on the new devices. I have the regular amount of BT Coex stuff and
I continue to work on the firmware error report system adding more
debug capabilities. More to come on that subject too."

On top of that, there are some cleanups to the new rsi driver, some
continuing improvements to the rtl818x drivers, and the usual bundles
of updates to ath9k, b43, mwifiex, wil6210, and a few other bits here
and there.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 13 insertions, 3 deletions

diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 9105a92364f7..74ab1d02013b 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -259,7 +259,7 @@ static void ath_edma_start_recv(struct ath_softc *sc)
 	ath_rx_addbuffer_edma(sc, ATH9K_RX_QUEUE_HP);
 	ath_rx_addbuffer_edma(sc, ATH9K_RX_QUEUE_LP);
 	ath_opmode_init(sc);
-	ath9k_hw_startpcureceive(sc->sc_ah, !!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL));
+	ath9k_hw_startpcureceive(sc->sc_ah, sc->cur_chan->offchannel);
 }
 
 static void ath_edma_stop_recv(struct ath_softc *sc)
@@ -374,6 +374,7 @@ void ath_rx_cleanup(struct ath_softc *sc)
 
 u32 ath_calcrxfilter(struct ath_softc *sc)
 {
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	u32 rfilt;
 
 	if (config_enabled(CONFIG_ATH9K_TX99))
@@ -424,6 +425,10 @@ u32 ath_calcrxfilter(struct ath_softc *sc)
 	if (AR_SREV_9550(sc->sc_ah) || AR_SREV_9531(sc->sc_ah))
 		rfilt |= ATH9K_RX_FILTER_4ADDRESS;
 
+	if (ath9k_use_chanctx &&
+	    test_bit(ATH_OP_SCANNING, &common->op_flags))
+		rfilt |= ATH9K_RX_FILTER_BEACON;
+
 	return rfilt;
 
 }
@@ -457,7 +462,7 @@ int ath_startrecv(struct ath_softc *sc)
 
 start_recv:
 	ath_opmode_init(sc);
-	ath9k_hw_startpcureceive(ah, !!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL));
+	ath9k_hw_startpcureceive(ah, sc->cur_chan->offchannel);
 
 	return 0;
 }
@@ -540,7 +545,7 @@ static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb)
 		sc->ps_flags &= ~PS_BEACON_SYNC;
 		ath_dbg(common, PS,
 			"Reconfigure beacon timers based on synchronized timestamp\n");
-		if (!(WARN_ON_ONCE(sc->cur_beacon_conf.beacon_interval == 0)))
+		if (!(WARN_ON_ONCE(sc->cur_chan->beacon.beacon_interval == 0)))
 			ath9k_set_beacon(sc);
 		if (sc->p2p_ps_vif)
 			ath9k_update_p2p_ps(sc, sc->p2p_ps_vif->vif);
@@ -887,6 +892,11 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
 		return -EINVAL;
 	}
 
+	if (rx_stats->is_mybeacon) {
+		sc->sched.next_tbtt = rx_stats->rs_tstamp;
+		ath_chanctx_event(sc, NULL, ATH_CHANCTX_EVENT_BEACON_RECEIVED);
+	}
+
 	ath9k_cmn_process_rssi(common, hw, rx_stats, rx_status);
 
 	rx_status->band = ah->curchan->chan->band;