Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next

John W. Linville says:

====================
pull request: wireless-next 2014-07-03

Please pull this first batch of wireless updates intended for the
3.17 stream...

For the mac80211 bits, Johannes says:

"The biggest thing here is probably Arik's TDLS rework, beyond that we
have smaller improvements and features like David's scanning IE thing,
Luca's queue work, some CSA work, etc. Also your PID rate control
removal, of course."

For the iwlwifi bits, Emmanuel says:

"I have here a whole bunch of various things. Andy contributes
better debug prints for dvm specific flows and a module parameter to
completely disable power save for dvm. Andrei is sharing the premises
of his work on CSA - more to come. Eran and Liad keep on working
on the new devices. I have the regular amount of BT Coex stuff and
I continue to work on the firmware error report system adding more
debug capabilities. More to come on that subject too."

On top of that, there are some cleanups to the new rsi driver, some
continuing improvements to the rtl818x drivers, and the usual bundles
of updates to ath9k, b43, mwifiex, wil6210, and a few other bits here
and there.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 12 insertions, 14 deletions

diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c
index 08244b3b327e..3cbef21b4726 100644
--- a/drivers/net/wireless/b43/phy_common.c
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -45,11 +45,10 @@ int b43_phy_allocate(struct b43_wldev *dev)
 	phy->ops = NULL;
 
 	switch (phy->type) {
-	case B43_PHYTYPE_A:
-		phy->ops = &b43_phyops_a;
-		break;
 	case B43_PHYTYPE_G:
+#ifdef CONFIG_B43_PHY_G
 		phy->ops = &b43_phyops_g;
+#endif
 		break;
 	case B43_PHYTYPE_N:
 #ifdef CONFIG_B43_PHY_N
@@ -94,7 +93,13 @@ int b43_phy_init(struct b43_wldev *dev)
 	const struct b43_phy_operations *ops = phy->ops;
 	int err;
 
-	phy->channel = ops->get_default_chan(dev);
+	/* During PHY init we need to use some channel. On the first init this
+	 * function is called *before* b43_op_config, so our pointer is NULL.
+	 */
+	if (!phy->chandef) {
+		phy->chandef = &dev->wl->hw->conf.chandef;
+		phy->channel = phy->chandef->chan->hw_value;
+	}
 
 	phy->ops->switch_analog(dev, true);
 	b43_software_rfkill(dev, false);
@@ -106,9 +111,7 @@ int b43_phy_init(struct b43_wldev *dev)
 	}
 	phy->do_full_init = false;
 
-	/* Make sure to switch hardware and firmware (SHM) to
-	 * the default channel. */
-	err = b43_switch_channel(dev, ops->get_default_chan(dev));
+	err = b43_switch_channel(dev, phy->channel);
 	if (err) {
 		b43err(dev->wl, "PHY init: Channel switch to default failed\n");
 		goto err_phy_exit;
@@ -408,9 +411,6 @@ int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel)
 	u16 channelcookie, savedcookie;
 	int err;
 
-	if (new_channel == B43_DEFAULT_CHANNEL)
-		new_channel = phy->ops->get_default_chan(dev);
-
 	/* First we set the channel radio code to prevent the
 	 * firmware from sending ghost packets.
 	 */
@@ -428,7 +428,6 @@ int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel)
 	if (err)
 		goto err_restore_cookie;
 
-	dev->phy.channel = new_channel;
 	/* Wait for the radio to tune to the channel and stabilize. */
 	msleep(8);
 
@@ -547,10 +546,9 @@ void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on)
 }
 
 
-bool b43_channel_type_is_40mhz(enum nl80211_channel_type channel_type)
+bool b43_is_40mhz(struct b43_wldev *dev)
 {
-	return (channel_type == NL80211_CHAN_HT40MINUS ||
-		channel_type == NL80211_CHAN_HT40PLUS);
+	return dev->phy.chandef->width == NL80211_CHAN_WIDTH_40;
 }
 
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/BmacPhyClkFgc */