Merge tag 'wireless-next-2025-05-22' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Johannes Berg says:

====================
Lots of new things, notably:
 * ath12k: monitor mode for WCN7850, better 6 GHz regulatory
 * brcmfmac: SAE for some Cypress devices
 * iwlwifi: rework device configuration
 * mac80211: scan improvements with MLO
 * mt76: EHT improvements, new device IDs
 * rtw88: throughput improvements
 * rtw89: MLO, STA/P2P concurrency improvements, SAR

* tag 'wireless-next-2025-05-22' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (389 commits)
  wifi: mt76: mt7925: add rfkill_poll for hardware rfkill
  wifi: mt76: support power delta calculation for 5 TX paths
  wifi: mt76: fix available_antennas setting
  wifi: mt76: mt7996: fix RX buffer size of MCU event
  wifi: mt76: mt7996: change max beacon size
  wifi: mt76: mt7996: fix invalid NSS setting when TX path differs from NSS
  wifi: mt76: mt7996: drop fragments with multicast or broadcast RA
  wifi: mt76: mt7996: set EHT max ampdu length capability
  wifi: mt76: mt7996: fix beamformee SS field
  wifi: mt76: remove capability of partial bandwidth UL MU-MIMO
  wifi: mt76: mt7925: add test mode support
  wifi: mt76: mt7925: extend MCU support for testmode
  wifi: mt76: mt7925: ensure all MCU commands wait for response
  wifi: mt76: mt7925: refine the sniffer commnad
  wifi: mt76: mt7925: prevent multiple scan commands
  wifi: mt76: mt7915: Fix null-ptr-deref in mt7915_mmio_wed_init()
  wifi: mt76: mt7996: Fix null-ptr-deref in mt7996_mmio_wed_init()
  wifi: mt76: mt7925: add RNR scan support for 6GHz
  wifi: mt76: add mt76_connac_mcu_build_rnr_scan_param routine
  wifi: mt76: scan: Fix 'mlink' dereferenced before IS_ERR_OR_NULL check
  ...
====================

Link: https://patch.msgid.link/20250522165501.189958-50-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 9 insertions, 8 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-utils.c b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-utils.c
index b3c25acd3691..ec312c90ff85 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-utils.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-utils.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
 /*
- * Copyright (C) 2005-2014, 2018-2021, 2023 Intel Corporation
+ * Copyright (C) 2005-2014, 2018-2021, 2023, 2025 Intel Corporation
  * Copyright (C) 2015 Intel Mobile Communications GmbH
  */
 #include <linux/types.h>
@@ -42,7 +42,7 @@ void iwl_init_ht_hw_capab(struct iwl_trans *trans,
 			  enum nl80211_band band,
 			  u8 tx_chains, u8 rx_chains)
 {
-	const struct iwl_cfg *cfg = trans->cfg;
+	const struct iwl_rf_cfg *cfg = trans->cfg;
 	int max_bit_rate = 0;
 
 	tx_chains = hweight8(tx_chains);
@@ -53,7 +53,8 @@ void iwl_init_ht_hw_capab(struct iwl_trans *trans,
 
 	if (!(data->sku_cap_11n_enable) ||
 	    (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_ALL) ||
-	    !cfg->ht_params) {
+	    /* there are no devices with HT but without HT40 entirely */
+	    !cfg->ht_params.ht40_bands) {
 		ht_info->ht_supported = false;
 		return;
 	}
@@ -64,17 +65,17 @@ void iwl_init_ht_hw_capab(struct iwl_trans *trans,
 	ht_info->ht_supported = true;
 	ht_info->cap = IEEE80211_HT_CAP_DSSSCCK40;
 
-	if (cfg->ht_params->stbc) {
+	if (cfg->ht_params.stbc) {
 		ht_info->cap |= (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT);
 
 		if (tx_chains > 1)
 			ht_info->cap |= IEEE80211_HT_CAP_TX_STBC;
 	}
 
-	if (cfg->ht_params->ldpc)
+	if (cfg->ht_params.ldpc)
 		ht_info->cap |= IEEE80211_HT_CAP_LDPC_CODING;
 
-	if (trans->trans_cfg->mq_rx_supported ||
+	if (trans->mac_cfg->mq_rx_supported ||
 	    iwlwifi_mod_params.amsdu_size >= IWL_AMSDU_8K)
 		ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU;
 
@@ -90,13 +91,13 @@ void iwl_init_ht_hw_capab(struct iwl_trans *trans,
 	if (rx_chains >= 3)
 		ht_info->mcs.rx_mask[2] = 0xFF;
 
-	if (cfg->ht_params->ht_greenfield_support)
+	if (cfg->ht_params.ht_greenfield_support)
 		ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD;
 	ht_info->cap |= IEEE80211_HT_CAP_SGI_20;
 
 	max_bit_rate = MAX_BIT_RATE_20_MHZ;
 
-	if (cfg->ht_params->ht40_bands & BIT(band)) {
+	if (cfg->ht_params.ht40_bands & BIT(band)) {
 		ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
 		ht_info->cap |= IEEE80211_HT_CAP_SGI_40;
 		max_bit_rate = MAX_BIT_RATE_40_MHZ;