Merge tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for the v3.14 merge window:

  Resource management
    - Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas)
    - Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu)
    - Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas)
    - Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas)
    - Enforce bus address limits in resource allocation (Yinghai Lu)
    - Allocate 64-bit BARs above 4G when possible (Yinghai Lu)
    - Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu)

  PCI device hotplug
    - Major rescan/remove locking update (Rafael J. Wysocki)
    - Make ioapic builtin only (not modular) (Yinghai Lu)
    - Fix release/free issues (Yinghai Lu)
    - Clean up pciehp (Bjorn Helgaas)
    - Announce pciehp slot info during enumeration (Bjorn Helgaas)

  MSI
    - Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev)
    - Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev)
    - Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev)
    - Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman)
    - Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong)

  SR-IOV
    - Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao)

  Virtualization
    - Add support for save/restore of extended capabilities (Alex Williamson)
    - Add Virtual Channel to save/restore support (Alex Williamson)
    - Never treat a VF as a multifunction device (Alex Williamson)
    - Add pci_try_reset_function(), et al (Alex Williamson)

  AER
    - Ignore non-PCIe error sources (Betty Dall)
    - Support ACPI HEST error sources for domains other than 0 (Betty Dall)
    - Consolidate HEST error source parsers (Bjorn Helgaas)
    - Add a TLP header print helper (Borislav Petkov)

  Freescale i.MX6
    - Remove unnecessary code (Fabio Estevam)
    - Make reset-gpio optional (Marek Vasut)
    - Report "link up" only after link training completes (Marek Vasut)
    - Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut)
    - Fix PCIe startup code (Richard Zhu)

  Marvell MVEBU
    - Remove duplicate of_clk_get_by_name() call (Andrew Lunn)
    - Drop writes to bridge Secondary Status register (Jason Gunthorpe)
    - Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe)
    - Support a bridge with no IO port window (Jason Gunthorpe)
    - Use max_t() instead of max(resource_size_t,) (Jingoo Han)
    - Remove redundant of_match_ptr (Sachin Kamat)
    - Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni)

  NVIDIA Tegra
    - Disable Gen2 for Tegra20 and Tegra30 (Eric Brower)

  Renesas R-Car
    - Add runtime PM support (Valentine Barshak)
    - Fix rcar_pci_probe() return value check (Wei Yongjun)

  Synopsys DesignWare
    - Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen)
    - Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen)
    - Fix missing MSI IRQs (Harro Haan)
    - Add dw_pcie prefix before cfg_read/write (Pratyush Anand)
    - Fix I/O transfers by using CPU (not realio) address (Pratyush Anand)
    - Whitespace cleanup (Jingoo Han)

  EISA
    - Call put_device() if device_register() fails (Levente Kurusa)
    - Revert EISA initialization breakage ((Bjorn Helgaas)

  Miscellaneous
    - Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger)
    - Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas)
    - Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas)
    - Use dev_is_pci() to identify PCI devices (Yijing Wang)
    - Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches)
    - Update documentation 00-INDEX (Erik Ekman)"

* tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (119 commits)
  Revert "EISA: Initialize device before its resources"
  Revert "EISA: Log device resources in dmesg"
  vfio-pci: Use pci "try" reset interface
  PCI: Check parent kobject in pci_destroy_dev()
  xen/pcifront: Use global PCI rescan-remove locking
  powerpc/eeh: Use global PCI rescan-remove locking
  PCI: Fix pci_check_and_unmask_intx() comment typos
  PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus()
  MPT / PCI: Use pci_stop_and_remove_bus_device_locked()
  platform / x86: Use global PCI rescan-remove locking
  PCI: hotplug: Use global PCI rescan-remove locking
  pcmcia: Use global PCI rescan-remove locking
  ACPI / hotplug / PCI: Use global PCI rescan-remove locking
  ACPI / PCI: Use global PCI rescan-remove locking in PCI root hotplug
  PCI: Add global pci_lock_rescan_remove()
  PCI: Cleanup pci.h whitespace
  PCI: Reorder so actual code comes before stubs
  PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0
  ACPICA: Add helper macros to extract bus/segment numbers from HEST table.
  PCI: Make local functions static
  ...

1 files changed, 103 insertions, 30 deletions

diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index fc1b74013743..00660cc502c5 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -98,41 +98,54 @@ void pci_bus_remove_resources(struct pci_bus *bus)
 	}
 }
 
-/**
- * pci_bus_alloc_resource - allocate a resource from a parent bus
- * @bus: PCI bus
- * @res: resource to allocate
- * @size: size of resource to allocate
- * @align: alignment of resource to allocate
- * @min: minimum /proc/iomem address to allocate
- * @type_mask: IORESOURCE_* type flags
- * @alignf: resource alignment function
- * @alignf_data: data argument for resource alignment function
- *
- * Given the PCI bus a device resides on, the size, minimum address,
- * alignment and type, try to find an acceptable resource allocation
- * for a specific device resource.
+static struct pci_bus_region pci_32_bit = {0, 0xffffffffULL};
+#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+static struct pci_bus_region pci_64_bit = {0,
+				(dma_addr_t) 0xffffffffffffffffULL};
+static struct pci_bus_region pci_high = {(dma_addr_t) 0x100000000ULL,
+				(dma_addr_t) 0xffffffffffffffffULL};
+#endif
+
+/*
+ * @res contains CPU addresses.  Clip it so the corresponding bus addresses
+ * on @bus are entirely within @region.  This is used to control the bus
+ * addresses of resources we allocate, e.g., we may need a resource that
+ * can be mapped by a 32-bit BAR.
  */
-int
-pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
+static void pci_clip_resource_to_region(struct pci_bus *bus,
+					struct resource *res,
+					struct pci_bus_region *region)
+{
+	struct pci_bus_region r;
+
+	pcibios_resource_to_bus(bus, &r, res);
+	if (r.start < region->start)
+		r.start = region->start;
+	if (r.end > region->end)
+		r.end = region->end;
+
+	if (r.end < r.start)
+		res->end = res->start - 1;
+	else
+		pcibios_bus_to_resource(bus, res, &r);
+}
+
+static int pci_bus_alloc_from_region(struct pci_bus *bus, struct resource *res,
 		resource_size_t size, resource_size_t align,
 		resource_size_t min, unsigned int type_mask,
 		resource_size_t (*alignf)(void *,
 					  const struct resource *,
 					  resource_size_t,
 					  resource_size_t),
-		void *alignf_data)
+		void *alignf_data,
+		struct pci_bus_region *region)
 {
-	int i, ret = -ENOMEM;
-	struct resource *r;
-	resource_size_t max = -1;
+	int i, ret;
+	struct resource *r, avail;
+	resource_size_t max;
 
 	type_mask |= IORESOURCE_IO | IORESOURCE_MEM;
 
-	/* don't allocate too high if the pref mem doesn't support 64bit*/
-	if (!(res->flags & IORESOURCE_MEM_64))
-		max = PCIBIOS_MAX_MEM_32;
-
 	pci_bus_for_each_resource(bus, r, i) {
 		if (!r)
 			continue;
@@ -147,15 +160,74 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
 		    !(res->flags & IORESOURCE_PREFETCH))
 			continue;
 
+		avail = *r;
+		pci_clip_resource_to_region(bus, &avail, region);
+		if (!resource_size(&avail))
+			continue;
+
+		/*
+		 * "min" is typically PCIBIOS_MIN_IO or PCIBIOS_MIN_MEM to
+		 * protect badly documented motherboard resources, but if
+		 * this is an already-configured bridge window, its start
+		 * overrides "min".
+		 */
+		if (avail.start)
+			min = avail.start;
+
+		max = avail.end;
+
 		/* Ok, try it out.. */
-		ret = allocate_resource(r, res, size,
-					r->start ? : min,
-					max, align,
-					alignf, alignf_data);
+		ret = allocate_resource(r, res, size, min, max,
+					align, alignf, alignf_data);
 		if (ret == 0)
-			break;
+			return 0;
 	}
-	return ret;
+	return -ENOMEM;
+}
+
+/**
+ * pci_bus_alloc_resource - allocate a resource from a parent bus
+ * @bus: PCI bus
+ * @res: resource to allocate
+ * @size: size of resource to allocate
+ * @align: alignment of resource to allocate
+ * @min: minimum /proc/iomem address to allocate
+ * @type_mask: IORESOURCE_* type flags
+ * @alignf: resource alignment function
+ * @alignf_data: data argument for resource alignment function
+ *
+ * Given the PCI bus a device resides on, the size, minimum address,
+ * alignment and type, try to find an acceptable resource allocation
+ * for a specific device resource.
+ */
+int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
+		resource_size_t size, resource_size_t align,
+		resource_size_t min, unsigned int type_mask,
+		resource_size_t (*alignf)(void *,
+					  const struct resource *,
+					  resource_size_t,
+					  resource_size_t),
+		void *alignf_data)
+{
+#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+	int rc;
+
+	if (res->flags & IORESOURCE_MEM_64) {
+		rc = pci_bus_alloc_from_region(bus, res, size, align, min,
+					       type_mask, alignf, alignf_data,
+					       &pci_high);
+		if (rc == 0)
+			return 0;
+
+		return pci_bus_alloc_from_region(bus, res, size, align, min,
+						 type_mask, alignf, alignf_data,
+						 &pci_64_bit);
+	}
+#endif
+
+	return pci_bus_alloc_from_region(bus, res, size, align, min,
+					 type_mask, alignf, alignf_data,
+					 &pci_32_bit);
 }
 
 void __weak pcibios_resource_survey_bus(struct pci_bus *bus) { }
@@ -176,6 +248,7 @@ int pci_bus_add_device(struct pci_dev *dev)
 	 */
 	pci_fixup_device(pci_fixup_final, dev);
 	pci_create_sysfs_dev_files(dev);
+	pci_proc_attach_device(dev);
 
 	dev->match_driver = true;
 	retval = device_attach(&dev->dev);