Merge tag 'sound-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "No dramatic changes are found in this development cycle, but as usual,
  many commits are applied in a wide range of drivers.

  Most of big changes are in ASoC, where a few bits of framework work
  and quite a lot of cleanups and improvements to existing code have
  been done. The rest are usual stuff, a few HD-audio and USB-audio
  quirks and fixes, as well as the drop of kthread usages in the whole
  subsystem.

  Below are some highlights:

  ASoC:
   - support for stereo DAPM controls
   - some initial work on the of-graph sound card
   - regmap conversions of the remaining AC'97 drivers
   - a new version of the topology ABI; this should be backward
     compatible
   - updates / cleanups of rsnd, sunxi, sti, nau8825, samsung, arizona,
     Intel skylake, atom-sst
   - new drivers for Cirrus Logic CS42L42, Qualcomm MSM8916-WCD, and
     Realtek RT5665

  USB-audio:
   - yet another race fix at disconnection
   - tolerated packet size calculation for some Android devices
   - quirks for Axe-Fx II, QuickCam, TEAC 501/503

  HD-audio:
   - improvement of Dell pin fixup mapping
   - quirks for HP Z1 Gen3, Alienware 15 R2 2016 and ALC622 headset mic

  Misc:
   - replace all kthread usages with simple works"

* tag 'sound-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (296 commits)
  ALSA: hiface: Fix M2Tech hiFace driver sampling rate change
  ALSA: usb-audio: Eliminate noise at the start of DSD playback.
  ALSA: usb-audio: Add native DSD support for TEAC 501/503 DAC
  ASoC: wm_adsp: wm_adsp_buf_alloc should use kfree in error path
  ASoC: topology: avoid uninitialized kcontrol_type
  ALSA: usb-audio: Add QuickCam Communicate Deluxe/S7500 to volume_control_quirks
  ALSA: usb-audio: add implicit fb quirk for Axe-Fx II
  ASoC: zte: spdif: correct ZX_SPDIF_CLK_RAT define
  ASoC: zte: spdif and i2s drivers are not zx296702 specific
  ASoC: rsnd: setup BRGCKR/BRRA/BRRB when starting
  ASoC: rsnd: enable/disable ADG when suspend/resume timing
  ASoC: rsnd: tidyup ssi->usrcnt counter check in hw_params
  ALSA: cs46xx: add a new line
  ASoC: Intel: update bxt_da7219_max98357a to support quad ch dmic capture
  ASoC: nau8825: disable sinc filter for high THD of ADC
  ALSA: usb-audio: more tolerant packetsize
  ALSA: usb-audio: avoid setting of sample rate multiple times on bus
  ASoC: cs35l34: Simplify the logic to set CS35L34_MCLK_CTL setting
  ALSA: hda - Gate the mic jack on HP Z1 Gen3 AiO
  ALSA: hda: when comparing pin configurations, ignore assoc in addition to seq
  ...

1 files changed, 4 insertions, 5 deletions

diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 3314bf299a51..fb44d5215e30 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -120,7 +120,7 @@ static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = {
 static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
 {
 	struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
-	int id = rdev->desc->id - RK808_ID_DCDC1;
+	int id = rdev_get_id(rdev);
 	struct gpio_desc *gpio = pdata->dvs_gpio[id];
 	unsigned int val;
 	int ret;
@@ -193,7 +193,7 @@ static int rk808_buck1_2_set_voltage_sel(struct regulator_dev *rdev,
 					 unsigned sel)
 {
 	struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
-	int id = rdev->desc->id - RK808_ID_DCDC1;
+	int id = rdev_get_id(rdev);
 	struct gpio_desc *gpio = pdata->dvs_gpio[id];
 	unsigned int reg = rdev->desc->vsel_reg;
 	unsigned old_sel;
@@ -232,7 +232,7 @@ static int rk808_buck1_2_set_voltage_time_sel(struct regulator_dev *rdev,
 				       unsigned int new_selector)
 {
 	struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
-	int id = rdev->desc->id - RK808_ID_DCDC1;
+	int id = rdev_get_id(rdev);
 	struct gpio_desc *gpio = pdata->dvs_gpio[id];
 
 	/* if there is no dvs1/2 pin, we don't need wait extra time here. */
@@ -245,8 +245,7 @@ static int rk808_buck1_2_set_voltage_time_sel(struct regulator_dev *rdev,
 static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
 {
 	unsigned int ramp_value = RK808_RAMP_RATE_10MV_PER_US;
-	unsigned int reg = rk808_buck_config_regs[rdev->desc->id -
-						  RK808_ID_DCDC1];
+	unsigned int reg = rk808_buck_config_regs[rdev_get_id(rdev)];
 
 	switch (ramp_delay) {
 	case 1 ... 2000: