staging: r8188eu: Add files for new driver - part 13

This commit adds files hal/odm_RTL8188E.c, hal/odm_RegConfig8188E.c,
hal/rtl8188e_cmd.c, and hal/rtl8188e_dm.c.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 268 insertions, 0 deletions

diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_dm.c b/drivers/staging/rtl8188eu/hal/rtl8188e_dm.c
new file mode 100644
index 000000000000..9c2e7a20c09e
--- /dev/null
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_dm.c
@@ -0,0 +1,268 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+/*  */
+/*  Description: */
+/*  */
+/*  This file is for 92CE/92CU dynamic mechanism only */
+/*  */
+/*  */
+/*  */
+#define _RTL8188E_DM_C_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#include <rtl8188e_hal.h>
+
+static void dm_CheckStatistics(struct adapter *Adapter)
+{
+}
+
+/*  Initialize GPIO setting registers */
+static void dm_InitGPIOSetting(struct adapter *Adapter)
+{
+	u8	tmp1byte;
+
+	tmp1byte = rtw_read8(Adapter, REG_GPIO_MUXCFG);
+	tmp1byte &= (GPIOSEL_GPIO | ~GPIOSEL_ENBT);
+
+	rtw_write8(Adapter, REG_GPIO_MUXCFG, tmp1byte);
+}
+
+/*  */
+/*  functions */
+/*  */
+static void Init_ODM_ComInfo_88E(struct adapter *Adapter)
+{
+	struct hal_data_8188e *hal_data = GET_HAL_DATA(Adapter);
+	struct dm_priv	*pdmpriv = &hal_data->dmpriv;
+	struct odm_dm_struct *dm_odm = &(hal_data->odmpriv);
+	u8 cut_ver, fab_ver;
+
+	/*  Init Value */
+	_rtw_memset(dm_odm, 0, sizeof(dm_odm));
+
+	dm_odm->Adapter = Adapter;
+
+	ODM_CmnInfoInit(dm_odm, ODM_CMNINFO_PLATFORM, ODM_CE);
+
+	if (Adapter->interface_type == RTW_GSPI)
+		ODM_CmnInfoInit(dm_odm, ODM_CMNINFO_INTERFACE, ODM_ITRF_SDIO);
+	else
+		ODM_CmnInfoInit(dm_odm, ODM_CMNINFO_INTERFACE, Adapter->interface_type);/* RTL871X_HCI_TYPE */
+
+	ODM_CmnInfoInit(dm_odm, ODM_CMNINFO_IC_TYPE, ODM_RTL8188E);
+
+	fab_ver = ODM_TSMC;
+	cut_ver = ODM_CUT_A;
+
+	ODM_CmnInfoInit(dm_odm, ODM_CMNINFO_FAB_VER, fab_ver);
+	ODM_CmnInfoInit(dm_odm, ODM_CMNINFO_CUT_VER, cut_ver);
+
+	ODM_CmnInfoInit(dm_odm, ODM_CMNINFO_MP_TEST_CHIP, IS_NORMAL_CHIP(hal_data->VersionID));
+
+	ODM_CmnInfoInit(dm_odm, ODM_CMNINFO_PATCH_ID, hal_data->CustomerID);
+	ODM_CmnInfoInit(dm_odm, ODM_CMNINFO_BWIFI_TEST, Adapter->registrypriv.wifi_spec);
+
+
+	if (hal_data->rf_type == RF_1T1R)
+		ODM_CmnInfoUpdate(dm_odm, ODM_CMNINFO_RF_TYPE, ODM_1T1R);
+	else if (hal_data->rf_type == RF_2T2R)
+		ODM_CmnInfoUpdate(dm_odm, ODM_CMNINFO_RF_TYPE, ODM_2T2R);
+	else if (hal_data->rf_type == RF_1T2R)
+		ODM_CmnInfoUpdate(dm_odm, ODM_CMNINFO_RF_TYPE, ODM_1T2R);
+
+	ODM_CmnInfoInit(dm_odm, ODM_CMNINFO_RF_ANTENNA_TYPE, hal_data->TRxAntDivType);
+
+	pdmpriv->InitODMFlag =	ODM_RF_CALIBRATION |
+				ODM_RF_TX_PWR_TRACK;
+
+	ODM_CmnInfoUpdate(dm_odm, ODM_CMNINFO_ABILITY, pdmpriv->InitODMFlag);
+}
+
+static void Update_ODM_ComInfo_88E(struct adapter *Adapter)
+{
+	struct mlme_ext_priv	*pmlmeext = &Adapter->mlmeextpriv;
+	struct mlme_priv	*pmlmepriv = &Adapter->mlmepriv;
+	struct pwrctrl_priv *pwrctrlpriv = &Adapter->pwrctrlpriv;
+	struct hal_data_8188e *hal_data = GET_HAL_DATA(Adapter);
+	struct odm_dm_struct *dm_odm = &(hal_data->odmpriv);
+	struct dm_priv	*pdmpriv = &hal_data->dmpriv;
+	int i;
+
+	pdmpriv->InitODMFlag =	ODM_BB_DIG |
+				ODM_BB_RA_MASK |
+				ODM_BB_DYNAMIC_TXPWR |
+				ODM_BB_FA_CNT |
+				ODM_BB_RSSI_MONITOR |
+				ODM_BB_CCK_PD |
+				ODM_BB_PWR_SAVE |
+				ODM_MAC_EDCA_TURBO |
+				ODM_RF_CALIBRATION |
+				ODM_RF_TX_PWR_TRACK;
+	if (hal_data->AntDivCfg)
+		pdmpriv->InitODMFlag |= ODM_BB_ANT_DIV;
+
+	if (Adapter->registrypriv.mp_mode == 1) {
+		pdmpriv->InitODMFlag =	ODM_RF_CALIBRATION |
+					ODM_RF_TX_PWR_TRACK;
+	}
+
+	ODM_CmnInfoUpdate(dm_odm, ODM_CMNINFO_ABILITY, pdmpriv->InitODMFlag);
+
+	ODM_CmnInfoHook(dm_odm, ODM_CMNINFO_TX_UNI, &(Adapter->xmitpriv.tx_bytes));
+	ODM_CmnInfoHook(dm_odm, ODM_CMNINFO_RX_UNI, &(Adapter->recvpriv.rx_bytes));
+	ODM_CmnInfoHook(dm_odm, ODM_CMNINFO_WM_MODE, &(pmlmeext->cur_wireless_mode));
+	ODM_CmnInfoHook(dm_odm, ODM_CMNINFO_SEC_CHNL_OFFSET, &(hal_data->nCur40MhzPrimeSC));
+	ODM_CmnInfoHook(dm_odm, ODM_CMNINFO_SEC_MODE, &(Adapter->securitypriv.dot11PrivacyAlgrthm));
+	ODM_CmnInfoHook(dm_odm, ODM_CMNINFO_BW, &(hal_data->CurrentChannelBW));
+	ODM_CmnInfoHook(dm_odm, ODM_CMNINFO_CHNL, &(hal_data->CurrentChannel));
+	ODM_CmnInfoHook(dm_odm, ODM_CMNINFO_NET_CLOSED, &(Adapter->net_closed));
+	ODM_CmnInfoHook(dm_odm, ODM_CMNINFO_MP_MODE, &(Adapter->registrypriv.mp_mode));
+	ODM_CmnInfoHook(dm_odm, ODM_CMNINFO_SCAN, &(pmlmepriv->bScanInProcess));
+	ODM_CmnInfoHook(dm_odm, ODM_CMNINFO_POWER_SAVING, &(pwrctrlpriv->bpower_saving));
+	ODM_CmnInfoInit(dm_odm, ODM_CMNINFO_RF_ANTENNA_TYPE, hal_data->TRxAntDivType);
+
+	for (i = 0; i < NUM_STA; i++)
+		ODM_CmnInfoPtrArrayHook(dm_odm, ODM_CMNINFO_STA_STATUS, i, NULL);
+}
+
+void rtl8188e_InitHalDm(struct adapter *Adapter)
+{
+	struct hal_data_8188e *hal_data = GET_HAL_DATA(Adapter);
+	struct dm_priv	*pdmpriv = &hal_data->dmpriv;
+	struct odm_dm_struct *dm_odm = &(hal_data->odmpriv);
+
+	dm_InitGPIOSetting(Adapter);
+	pdmpriv->DM_Type = DM_Type_ByDriver;
+	pdmpriv->DMFlag = DYNAMIC_FUNC_DISABLE;
+	Update_ODM_ComInfo_88E(Adapter);
+	ODM_DMInit(dm_odm);
+	Adapter->fix_rate = 0xFF;
+}
+
+void rtl8188e_HalDmWatchDog(struct adapter *Adapter)
+{
+	bool fw_cur_in_ps = false;
+	bool fw_ps_awake = true;
+	u8 hw_init_completed = false;
+	struct hal_data_8188e *hal_data = GET_HAL_DATA(Adapter);
+
+	_func_enter_;
+	hw_init_completed = Adapter->hw_init_completed;
+
+	if (!hw_init_completed)
+		goto skip_dm;
+
+	fw_cur_in_ps = Adapter->pwrctrlpriv.bFwCurrentInPSMode;
+	rtw_hal_get_hwreg(Adapter, HW_VAR_FWLPS_RF_ON, (u8 *)(&fw_ps_awake));
+
+	/*  Fw is under p2p powersaving mode, driver should stop dynamic mechanism. */
+	/*  modifed by thomas. 2011.06.11. */
+	if (Adapter->wdinfo.p2p_ps_mode)
+		fw_ps_awake = false;
+
+	if (hw_init_completed && ((!fw_cur_in_ps) && fw_ps_awake)) {
+		/*  Calculate Tx/Rx statistics. */
+		dm_CheckStatistics(Adapter);
+
+	_func_exit_;
+	}
+
+	/* ODM */
+	if (hw_init_completed) {
+		struct mlme_priv *pmlmepriv = &Adapter->mlmepriv;
+		u8 bLinked = false;
+
+		if ((check_fwstate(pmlmepriv, WIFI_AP_STATE)) ||
+		    (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE | WIFI_ADHOC_MASTER_STATE))) {
+			if (Adapter->stapriv.asoc_sta_count > 2)
+				bLinked = true;
+		} else {/* Station mode */
+			if (check_fwstate(pmlmepriv, _FW_LINKED))
+				bLinked = true;
+		}
+
+		ODM_CmnInfoUpdate(&hal_data->odmpriv, ODM_CMNINFO_LINK, bLinked);
+		ODM_DMWatchdog(&hal_data->odmpriv);
+	}
+skip_dm:
+	/*  Check GPIO to determine current RF on/off and Pbc status. */
+	/*  Check Hardware Radio ON/OFF or not */
+	return;
+}
+
+void rtl8188e_init_dm_priv(struct adapter *Adapter)
+{
+	struct hal_data_8188e *hal_data = GET_HAL_DATA(Adapter);
+	struct dm_priv	*pdmpriv = &hal_data->dmpriv;
+	struct odm_dm_struct *podmpriv = &hal_data->odmpriv;
+
+	_rtw_memset(pdmpriv, 0, sizeof(struct dm_priv));
+	Init_ODM_ComInfo_88E(Adapter);
+	ODM_InitDebugSetting(podmpriv);
+}
+
+void rtl8188e_deinit_dm_priv(struct adapter *Adapter)
+{
+}
+
+/*  Add new function to reset the state of antenna diversity before link. */
+/*  Compare RSSI for deciding antenna */
+void AntDivCompare8188E(struct adapter *Adapter, struct wlan_bssid_ex *dst, struct wlan_bssid_ex *src)
+{
+	struct hal_data_8188e *hal_data = GET_HAL_DATA(Adapter);
+
+	if (0 != hal_data->AntDivCfg) {
+		/* select optimum_antenna for before linked =>For antenna diversity */
+		if (dst->Rssi >=  src->Rssi) {/* keep org parameter */
+			src->Rssi = dst->Rssi;
+			src->PhyInfo.Optimum_antenna = dst->PhyInfo.Optimum_antenna;
+		}
+	}
+}
+
+/*  Add new function to reset the state of antenna diversity before link. */
+u8 AntDivBeforeLink8188E(struct adapter *Adapter)
+{
+	struct hal_data_8188e *hal_data = GET_HAL_DATA(Adapter);
+	struct odm_dm_struct *dm_odm = &hal_data->odmpriv;
+	struct sw_ant_switch *dm_swat_tbl = &dm_odm->DM_SWAT_Table;
+	struct mlme_priv *pmlmepriv = &(Adapter->mlmepriv);
+
+	/*  Condition that does not need to use antenna diversity. */
+	if (hal_data->AntDivCfg == 0)
+		return false;
+
+	if (check_fwstate(pmlmepriv, _FW_LINKED))
+		return false;
+
+	if (dm_swat_tbl->SWAS_NoLink_State == 0) {
+		/* switch channel */
+		dm_swat_tbl->SWAS_NoLink_State = 1;
+		dm_swat_tbl->CurAntenna = (dm_swat_tbl->CurAntenna == Antenna_A) ? Antenna_B : Antenna_A;
+
+		rtw_antenna_select_cmd(Adapter, dm_swat_tbl->CurAntenna, false);
+		return true;
+	} else {
+		dm_swat_tbl->SWAS_NoLink_State = 0;
+		return false;
+	}
+}