diff options
| author | Kai-Heng Feng <kai.heng.feng@canonical.com> | 2019-01-12 03:54:25 +0800 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2019-01-18 10:02:56 +0100 |
| commit | d7a6c0ce8d26412903c7981503bad9e1cc7c45d2 (patch) | |
| tree | 7290ea96ae2ae03f491117ef10d90491ba3d05a8 /drivers/usb/core/hub.c | |
| parent | 7529b2574a7aaf902f1f8159fbc2a7caa74be559 (diff) | |
USB: Consolidate LPM checks to avoid enabling LPM twice
USB Bluetooth controller QCA ROME (0cf3:e007) sometimes stops working
after S3:
[ 165.110742] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 168.432065] Bluetooth: hci0: Failed to send body at 4 of 1953 (-110)
After some experiments, I found that disabling LPM can workaround the
issue.
On some platforms, the USB power is cut during S3, so the driver uses
reset-resume to resume the device. During port resume, LPM gets enabled
twice, by usb_reset_and_verify_device() and usb_port_resume().
Consolidate all checks into new LPM helpers to make sure LPM only gets
enabled once.
Fixes: de68bab4fa96 ("usb: Don't enable USB 2.0 Link PM by default.”)
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable <stable@vger.kernel.org> # after much soaking
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/core/hub.c')
| -rw-r--r-- | drivers/usb/core/hub.c | 12 |
1 files changed, 4 insertions, 8 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 7337e942e9b0..bb0830c72286 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3251,8 +3251,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) } /* disable USB2 hardware LPM */ - if (udev->usb2_hw_lpm_enabled == 1) - usb_disable_usb2_hardware_lpm(udev); + usb_disable_usb2_hardware_lpm(udev); if (usb_disable_ltm(udev)) { dev_err(&udev->dev, "Failed to disable LTM before suspend\n"); @@ -3290,8 +3289,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) usb_enable_ltm(udev); err_ltm: /* Try to enable USB2 hardware LPM again */ - if (udev->usb2_hw_lpm_capable == 1) - usb_enable_usb2_hardware_lpm(udev); + usb_enable_usb2_hardware_lpm(udev); if (udev->do_remote_wakeup) (void) usb_disable_remote_wakeup(udev); @@ -3574,8 +3572,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) hub_port_logical_disconnect(hub, port1); } else { /* Try to enable USB2 hardware LPM */ - if (udev->usb2_hw_lpm_capable == 1) - usb_enable_usb2_hardware_lpm(udev); + usb_enable_usb2_hardware_lpm(udev); /* Try to enable USB3 LTM */ usb_enable_ltm(udev); @@ -5680,8 +5677,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev) /* Disable USB2 hardware LPM. * It will be re-enabled by the enumeration process. */ - if (udev->usb2_hw_lpm_enabled == 1) - usb_disable_usb2_hardware_lpm(udev); + usb_disable_usb2_hardware_lpm(udev); /* Disable LPM while we reset the device and reinstall the alt settings. * Device-initiated LPM, and system exit latency settings are cleared |