Merge tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big set of USB and PHY driver patches for 5.2-rc1

  There is the usual set of:

   - USB gadget updates

   - PHY driver updates and additions

   - USB serial driver updates and fixes

   - typec updates and new chips supported

   - mtu3 driver updates

   - xhci driver updates

   - other tiny driver updates

  Nothing really interesting, just constant forward progress.

  All of these have been in linux-next for a while with no reported
  issues. The usb-gadget and usb-serial trees were merged a bit "late",
  but both of them had been in linux-next before they got merged here
  last Friday"

* tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (206 commits)
  USB: serial: f81232: implement break control
  USB: serial: f81232: add high baud rate support
  USB: serial: f81232: clear overrun flag
  USB: serial: f81232: fix interrupt worker not stop
  usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA
  usb: dwc3: Fix default lpm_nyet_threshold value
  usb: dwc3: debug: Print GET_STATUS(device) tracepoint
  usb: dwc3: Do core validation early on probe
  usb: dwc3: gadget: Set lpm_capable
  usb: gadget: atmel: tie wake lock to running clock
  usb: gadget: atmel: support USB suspend
  usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask
  dwc2: gadget: Fix completed transfer size calculation in DDMA
  usb: dwc2: Set lpm mode parameters depend on HW configuration
  usb: dwc2: Fix channel disable flow
  usb: dwc2: Set actual frame number for completed ISOC transfer
  usb: gadget: do not use __constant_cpu_to_le16
  usb: dwc2: gadget: Increase descriptors count for ISOC's
  usb: introduce usb_ep_type_string() function
  usb: dwc3: move synchronize_irq() out of the spinlock protected block
  ...

1 files changed, 21 insertions, 6 deletions

diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index 4fee200795a5..f8bd1d57e795 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -16,6 +16,8 @@
 #include <linux/platform_device.h>
 
 #include "mtu3.h"
+#include "mtu3_debug.h"
+#include "mtu3_trace.h"
 
 static int ep_fifo_alloc(struct mtu3_ep *mep, u32 seg_size)
 {
@@ -299,6 +301,7 @@ int mtu3_config_ep(struct mtu3 *mtu, struct mtu3_ep *mep,
 			int interval, int burst, int mult)
 {
 	void __iomem *mbase = mtu->mac_base;
+	bool gen2cp = mtu->gen2cp;
 	int epnum = mep->epnum;
 	u32 csr0, csr1, csr2;
 	int fifo_sgsz, fifo_addr;
@@ -319,7 +322,7 @@ int mtu3_config_ep(struct mtu3 *mtu, struct mtu3_ep *mep,
 
 		num_pkts = (burst + 1) * (mult + 1) - 1;
 		csr1 = TX_SS_BURST(burst) | TX_SLOT(mep->slot);
-		csr1 |= TX_MAX_PKT(num_pkts) | TX_MULT(mult);
+		csr1 |= TX_MAX_PKT(gen2cp, num_pkts) | TX_MULT(gen2cp, mult);
 
 		csr2 = TX_FIFOADDR(fifo_addr >> 4);
 		csr2 |= TX_FIFOSEGSIZE(fifo_sgsz);
@@ -355,7 +358,7 @@ int mtu3_config_ep(struct mtu3 *mtu, struct mtu3_ep *mep,
 
 		num_pkts = (burst + 1) * (mult + 1) - 1;
 		csr1 = RX_SS_BURST(burst) | RX_SLOT(mep->slot);
-		csr1 |= RX_MAX_PKT(num_pkts) | RX_MULT(mult);
+		csr1 |= RX_MAX_PKT(gen2cp, num_pkts) | RX_MULT(gen2cp, mult);
 
 		csr2 = RX_FIFOADDR(fifo_addr >> 4);
 		csr2 |= RX_FIFOSEGSIZE(fifo_sgsz);
@@ -600,6 +603,10 @@ static void mtu3_regs_init(struct mtu3 *mtu)
 	mtu3_clrbits(mbase, U3D_MISC_CTRL, VBUS_FRC_EN | VBUS_ON);
 	/* enable automatical HWRW from L1 */
 	mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, LPM_HRWE);
+
+	/* use new QMU format when HW version >= 0x1003 */
+	if (mtu->gen2cp)
+		mtu3_writel(mbase, U3D_QFCR, ~0x0);
 }
 
 static irqreturn_t mtu3_link_isr(struct mtu3 *mtu)
@@ -650,6 +657,8 @@ static irqreturn_t mtu3_link_isr(struct mtu3 *mtu)
 		break;
 	}
 	dev_dbg(mtu->dev, "%s: %s\n", __func__, usb_speed_string(udev_speed));
+	mtu3_dbg_trace(mtu->dev, "link speed %s",
+		       usb_speed_string(udev_speed));
 
 	mtu->g.speed = udev_speed;
 	mtu->g.ep0->maxpacket = maxpkt;
@@ -672,6 +681,7 @@ static irqreturn_t mtu3_u3_ltssm_isr(struct mtu3 *mtu)
 	ltssm &= mtu3_readl(mbase, U3D_LTSSM_INTR_ENABLE);
 	mtu3_writel(mbase, U3D_LTSSM_INTR, ltssm); /* W1C */
 	dev_dbg(mtu->dev, "=== LTSSM[%x] ===\n", ltssm);
+	trace_mtu3_u3_ltssm_isr(ltssm);
 
 	if (ltssm & (HOT_RST_INTR | WARM_RST_INTR))
 		mtu3_gadget_reset(mtu);
@@ -702,6 +712,7 @@ static irqreturn_t mtu3_u2_common_isr(struct mtu3 *mtu)
 	u2comm &= mtu3_readl(mbase, U3D_COMMON_USB_INTR_ENABLE);
 	mtu3_writel(mbase, U3D_COMMON_USB_INTR, u2comm); /* W1C */
 	dev_dbg(mtu->dev, "=== U2COMM[%x] ===\n", u2comm);
+	trace_mtu3_u2_common_isr(u2comm);
 
 	if (u2comm & SUSPEND_INTR)
 		mtu3_gadget_suspend(mtu);
@@ -749,13 +760,15 @@ static irqreturn_t mtu3_irq(int irq, void *data)
 
 static int mtu3_hw_init(struct mtu3 *mtu)
 {
-	u32 cap_dev;
+	u32 value;
 	int ret;
 
-	mtu->hw_version = mtu3_readl(mtu->ippc_base, U3D_SSUSB_HW_ID);
+	value = mtu3_readl(mtu->ippc_base, U3D_SSUSB_IP_TRUNK_VERS);
+	mtu->hw_version = IP_TRUNK_VERS(value);
+	mtu->gen2cp = !!(mtu->hw_version >= MTU3_TRUNK_VERS_1003);
 
-	cap_dev = mtu3_readl(mtu->ippc_base, U3D_SSUSB_IP_DEV_CAP);
-	mtu->is_u3_ip = !!SSUSB_IP_DEV_U3_PORT_NUM(cap_dev);
+	value = mtu3_readl(mtu->ippc_base, U3D_SSUSB_IP_DEV_CAP);
+	mtu->is_u3_ip = !!SSUSB_IP_DEV_U3_PORT_NUM(value);
 
 	dev_info(mtu->dev, "IP version 0x%x(%s IP)\n", mtu->hw_version,
 		mtu->is_u3_ip ? "U3" : "U2");
@@ -893,6 +906,8 @@ int ssusb_gadget_init(struct ssusb_mtk *ssusb)
 	if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG)
 		mtu3_stop(mtu);
 
+	ssusb_dev_debugfs_init(ssusb);
+
 	dev_dbg(dev, " %s() done...\n", __func__);
 
 	return 0;