summaryrefslogtreecommitdiff
path: root/drivers/video
diff options
context:
space:
mode:
authorJean Delvare <khali@linux-fr.org>2009-09-22 16:47:47 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2009-09-23 07:39:56 -0700
commit0728bacbba3b0267fa8ca8be69aa43d81b57ab51 (patch)
treea0dd85cb348ad481e92a0d4f45eefdc88fac6e3d /drivers/video
parent0fcf6ada2b8eb42d132c0846384f1299889609e3 (diff)
matroxfb: make CONFIG_FB_MATROX_MULTIHEAD=y mandatory
I would like to get rid of option CONFIG_FB_MATROX_MULTIHEAD and just always enable it. There are many reasons for doing this: * CONFIG_FB_MATROX_MULTIHEAD=y is what all x86 distributions do, so it definitely works or we would know by now. * Building the matroxfb driver with CONFIG_FB_MATROX_MULTIHEAD not set results in the following build warning: drivers/video/matrox/matroxfb_crtc2.c: In function 'matroxfb_dh_open': drivers/video/matrox/matroxfb_crtc2.c:265: warning: the address of 'matroxfb_global_mxinfo' will always evaluate as 'true' drivers/video/matrox/matroxfb_crtc2.c: In function 'matroxfb_dh_release': drivers/video/matrox/matroxfb_crtc2.c:285: warning: the address of 'matroxfb_global_mxinfo' will always evaluate as 'true' This is nothing to be worried about, the driver will work fine, but build warnings are still annoying. * The trick to get multihead support without CONFIG_FB_MATROX_MULTIHEAD, which is described in the config help text, no longer works: you can't load the same kernel module more than once. * I fail to see how CONFIG_FB_MATROX_MULTIHEAD=y would make the code significantly slower, contrary to what the help text says. A few extra parameters on the stack here and there can't really slow things down in comaprison to the rest of the code, and register access. * The driver built without CONFIG_FB_MATROX_MULTIHEAD is larger than the driver build with CONFIG_FB_MATROX_MULTIHEAD=y by 8%. * One less configuration option makes things simpler. We add options all the time, being able to remove one for once is nice. It improves testing coverage. And I don't think the Matrox adapters are still popular enough to warrant overdetailed configuration settings. * We should be able to unobfuscate the driver code quite a bit after this change (patches follow.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Petr Vandrovec <vandrove@vc.cvut.cz> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/video')
-rw-r--r--drivers/video/Kconfig20
-rw-r--r--drivers/video/matrox/matroxfb_base.c23
-rw-r--r--drivers/video/matrox/matroxfb_base.h20
-rw-r--r--drivers/video/matrox/matroxfb_misc.c4
4 files changed, 0 insertions, 67 deletions
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 7be506262284..9bbb2855ea91 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1275,26 +1275,6 @@ config FB_MATROX_MAVEN
painting procedures (the secondary head does not use acceleration
engine).
-config FB_MATROX_MULTIHEAD
- bool "Multihead support"
- depends on FB_MATROX
- ---help---
- Say Y here if you have more than one (supported) Matrox device in
- your computer and you want to use all of them for different monitors
- ("multihead"). If you have only one device, you should say N because
- the driver compiled with Y is larger and a bit slower, especially on
- ia32 (ix86).
-
- If you said M to "Matrox unified accelerated driver" and N here, you
- will still be able to use several Matrox devices simultaneously:
- insert several instances of the module matroxfb into the kernel
- with insmod, supplying the parameter "dev=N" where N is 0, 1, etc.
- for the different Matrox devices. This method is slightly faster but
- uses 40 KB of kernel memory per Matrox card.
-
- There is no need for enabling 'Matrox multihead support' if you have
- only one Matrox card in the box.
-
config FB_RADEON
tristate "ATI Radeon display support"
depends on FB && PCI
diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c
index 0c1049b308bf..6ede98da4618 100644
--- a/drivers/video/matrox/matroxfb_base.c
+++ b/drivers/video/matrox/matroxfb_base.c
@@ -379,9 +379,7 @@ static void matroxfb_remove(WPMINFO int dummy) {
mga_iounmap(ACCESS_FBINFO(video.vbase));
release_mem_region(ACCESS_FBINFO(video.base), ACCESS_FBINFO(video.len_maximum));
release_mem_region(ACCESS_FBINFO(mmio.base), 16384);
-#ifdef CONFIG_FB_MATROX_MULTIHEAD
kfree(minfo);
-#endif
}
/*
@@ -644,9 +642,7 @@ static int matroxfb_setcolreg(unsigned regno, unsigned red, unsigned green,
unsigned blue, unsigned transp,
struct fb_info *fb_info)
{
-#ifdef CONFIG_FB_MATROX_MULTIHEAD
struct matrox_fb_info* minfo = container_of(fb_info, struct matrox_fb_info, fbcon);
-#endif
DBG(__func__)
@@ -2011,9 +2007,6 @@ static int matroxfb_probe(struct pci_dev* pdev, const struct pci_device_id* dumm
struct matrox_fb_info* minfo;
int err;
u_int32_t cmd;
-#ifndef CONFIG_FB_MATROX_MULTIHEAD
- static int registered = 0;
-#endif
DBG(__func__)
svid = pdev->subsystem_vendor;
@@ -2037,15 +2030,9 @@ static int matroxfb_probe(struct pci_dev* pdev, const struct pci_device_id* dumm
return -1;
}
-#ifdef CONFIG_FB_MATROX_MULTIHEAD
minfo = kmalloc(sizeof(*minfo), GFP_KERNEL);
if (!minfo)
return -1;
-#else
- if (registered) /* singlehead driver... */
- return -1;
- minfo = &matroxfb_global_mxinfo;
-#endif
memset(MINFO, 0, sizeof(*MINFO));
ACCESS_FBINFO(pcidev) = pdev;
@@ -2090,15 +2077,10 @@ static int matroxfb_probe(struct pci_dev* pdev, const struct pci_device_id* dumm
err = initMatrox2(PMINFO b);
if (!err) {
-#ifndef CONFIG_FB_MATROX_MULTIHEAD
- registered = 1;
-#endif
matroxfb_register_device(MINFO);
return 0;
}
-#ifdef CONFIG_FB_MATROX_MULTIHEAD
kfree(minfo);
-#endif
return -1;
}
@@ -2510,13 +2492,8 @@ module_param(inv24, int, 0);
MODULE_PARM_DESC(inv24, "Inverts clock polarity for 24bpp and loop frequency > 100MHz (default=do not invert polarity)");
module_param(inverse, int, 0);
MODULE_PARM_DESC(inverse, "Inverse (0 or 1) (default=0)");
-#ifdef CONFIG_FB_MATROX_MULTIHEAD
module_param(dev, int, 0);
MODULE_PARM_DESC(dev, "Multihead support, attach to device ID (0..N) (default=all working)");
-#else
-module_param(dev, int, 0);
-MODULE_PARM_DESC(dev, "Multihead support, attach to device ID (0..N) (default=first working)");
-#endif
module_param(vesa, int, 0);
MODULE_PARM_DESC(vesa, "Startup videomode (0x000-0x1FF) (default=0x101)");
module_param(xres, int, 0);
diff --git a/drivers/video/matrox/matroxfb_base.h b/drivers/video/matrox/matroxfb_base.h
index 95883236c0cd..ba64f5e33467 100644
--- a/drivers/video/matrox/matroxfb_base.h
+++ b/drivers/video/matrox/matroxfb_base.h
@@ -524,7 +524,6 @@ struct matrox_fb_info {
#define info2minfo(info) container_of(info, struct matrox_fb_info, fbcon)
-#ifdef CONFIG_FB_MATROX_MULTIHEAD
#define ACCESS_FBINFO2(info, x) (info->x)
#define ACCESS_FBINFO(x) ACCESS_FBINFO2(minfo,x)
@@ -538,25 +537,6 @@ struct matrox_fb_info {
#define PMINFO PMINFO2 ,
#define MINFO_FROM(x) struct matrox_fb_info* minfo = x
-#else
-
-extern struct matrox_fb_info matroxfb_global_mxinfo;
-
-#define ACCESS_FBINFO(x) (matroxfb_global_mxinfo.x)
-#define ACCESS_FBINFO2(info, x) (matroxfb_global_mxinfo.x)
-
-#define MINFO (&matroxfb_global_mxinfo)
-
-#define WPMINFO2 void
-#define WPMINFO
-#define CPMINFO2 void
-#define CPMINFO
-#define PMINFO2
-#define PMINFO
-
-#define MINFO_FROM(x)
-
-#endif
#define MINFO_FROM_INFO(x) MINFO_FROM(info2minfo(x))
diff --git a/drivers/video/matrox/matroxfb_misc.c b/drivers/video/matrox/matroxfb_misc.c
index 5b5f072fc1a8..d5b9e789cca6 100644
--- a/drivers/video/matrox/matroxfb_misc.c
+++ b/drivers/video/matrox/matroxfb_misc.c
@@ -784,10 +784,6 @@ EXPORT_SYMBOL(matroxfb_DAC_in);
EXPORT_SYMBOL(matroxfb_DAC_out);
EXPORT_SYMBOL(matroxfb_var2my);
EXPORT_SYMBOL(matroxfb_PLL_calcclock);
-#ifndef CONFIG_FB_MATROX_MULTIHEAD
-struct matrox_fb_info matroxfb_global_mxinfo;
-EXPORT_SYMBOL(matroxfb_global_mxinfo);
-#endif
EXPORT_SYMBOL(matroxfb_vgaHWinit); /* DAC1064, Ti3026 */
EXPORT_SYMBOL(matroxfb_vgaHWrestore); /* DAC1064, Ti3026 */
EXPORT_SYMBOL(matroxfb_read_pins);