summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorMark Brown <broonie@kernel.org>2019-05-02 11:20:29 +0900
committerMark Brown <broonie@kernel.org>2019-05-02 11:20:29 +0900
commit2e5f081003f033d37be3faf052aaccc8b6a44aa5 (patch)
tree6d07a9bfff47b20f997ecce96162b8ca9cf7b19c /drivers
parent58b860ed4a77d9cb17b78e663a0341b79a12e240 (diff)
parentd61ad23cb3be09ff4956e9b9794134456522817f (diff)
Merge branch 'spi-5.2' into spi-next
Diffstat (limited to 'drivers')
-rw-r--r--drivers/spi/Kconfig16
-rw-r--r--drivers/spi/Makefile2
-rw-r--r--drivers/spi/atmel-quadspi.c2
-rw-r--r--drivers/spi/spi-at91-usart.c8
-rw-r--r--drivers/spi/spi-bcm2835.c39
-rw-r--r--drivers/spi/spi-bcm2835aux.c205
-rw-r--r--drivers/spi/spi-bitbang.c66
-rw-r--r--drivers/spi/spi-dw-mmio.c12
-rw-r--r--drivers/spi/spi-ep93xx.c32
-rw-r--r--drivers/spi/spi-fsl-lib.h2
-rw-r--r--drivers/spi/spi-fsl-lpspi.c569
-rw-r--r--drivers/spi/spi-fsl-qspi.c2
-rw-r--r--drivers/spi/spi-fsl-spi.c81
-rw-r--r--drivers/spi/spi-gpio.c226
-rw-r--r--drivers/spi/spi-imx.c7
-rw-r--r--drivers/spi/spi-mem.c8
-rw-r--r--drivers/spi/spi-mt7621.c (renamed from drivers/staging/mt7621-spi/spi-mt7621.c)83
-rw-r--r--drivers/spi/spi-mxic.c6
-rw-r--r--drivers/spi/spi-orion.c4
-rw-r--r--drivers/spi/spi-pxa2xx-dma.c4
-rw-r--r--drivers/spi/spi-pxa2xx-pci.c5
-rw-r--r--drivers/spi/spi-pxa2xx.c30
-rw-r--r--drivers/spi/spi-sh-msiof.c224
-rw-r--r--drivers/spi/spi-stm32-qspi.c227
-rw-r--r--drivers/spi/spi-tegra114.c97
-rw-r--r--drivers/spi/spi-zynq-qspi.c761
-rw-r--r--drivers/spi/spi.c72
-rw-r--r--drivers/spi/spidev.c4
-rw-r--r--drivers/staging/Kconfig2
-rw-r--r--drivers/staging/Makefile1
-rw-r--r--drivers/staging/mt7621-spi/Kconfig6
-rw-r--r--drivers/staging/mt7621-spi/Makefile1
-rw-r--r--drivers/staging/mt7621-spi/TODO5
33 files changed, 2202 insertions, 607 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index f761655e2a36..0fba8f400c59 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -426,6 +426,12 @@ config SPI_MT65XX
say Y or M here.If you are not sure, say N.
SPI drivers for Mediatek MT65XX and MT81XX series ARM SoCs.
+config SPI_MT7621
+ tristate "MediaTek MT7621 SPI Controller"
+ depends on RALINK || COMPILE_TEST
+ help
+ This selects a driver for the MediaTek MT7621 SPI Controller.
+
config SPI_NPCM_PSPI
tristate "Nuvoton NPCM PSPI Controller"
depends on ARCH_NPCM || COMPILE_TEST
@@ -842,9 +848,17 @@ config SPI_XTENSA_XTFPGA
16 bit words in SPI mode 0, automatically asserting CS on transfer
start and deasserting on end.
+config SPI_ZYNQ_QSPI
+ tristate "Xilinx Zynq QSPI controller"
+ depends on ARCH_ZYNQ || COMPILE_TEST
+ help
+ This enables support for the Zynq Quad SPI controller
+ in master mode.
+ This controller only supports SPI memory interface.
+
config SPI_ZYNQMP_GQSPI
tristate "Xilinx ZynqMP GQSPI controller"
- depends on SPI_MASTER && HAS_DMA
+ depends on (SPI_MASTER && HAS_DMA) || COMPILE_TEST
help
Enables Xilinx GQSPI controller driver for Zynq UltraScale+ MPSoC.
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index d8fc03c9faa2..f2f78d03dc28 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -60,6 +60,7 @@ obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mpc512x-psc.o
obj-$(CONFIG_SPI_MPC52xx_PSC) += spi-mpc52xx-psc.o
obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o
obj-$(CONFIG_SPI_MT65XX) += spi-mt65xx.o
+obj-$(CONFIG_SPI_MT7621) += spi-mt7621.o
obj-$(CONFIG_SPI_MXIC) += spi-mxic.o
obj-$(CONFIG_SPI_MXS) += spi-mxs.o
obj-$(CONFIG_SPI_NPCM_PSPI) += spi-npcm-pspi.o
@@ -118,6 +119,7 @@ obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o
obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
obj-$(CONFIG_SPI_XLP) += spi-xlp.o
obj-$(CONFIG_SPI_XTENSA_XTFPGA) += spi-xtensa-xtfpga.o
+obj-$(CONFIG_SPI_ZYNQ_QSPI) += spi-zynq-qspi.o
obj-$(CONFIG_SPI_ZYNQMP_GQSPI) += spi-zynqmp-gqspi.o
# SPI slave protocol handlers
diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
index b3173ebddade..9f24d5f0b431 100644
--- a/drivers/spi/atmel-quadspi.c
+++ b/drivers/spi/atmel-quadspi.c
@@ -366,7 +366,7 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
return err;
}
-const char *atmel_qspi_get_name(struct spi_mem *spimem)
+static const char *atmel_qspi_get_name(struct spi_mem *spimem)
{
return dev_name(spimem->spi->dev.parent);
}
diff --git a/drivers/spi/spi-at91-usart.c b/drivers/spi/spi-at91-usart.c
index a694d702e574..f763e14bdf12 100644
--- a/drivers/spi/spi-at91-usart.c
+++ b/drivers/spi/spi-at91-usart.c
@@ -178,12 +178,6 @@ static int at91_usart_spi_setup(struct spi_device *spi)
struct at91_usart_spi *aus = spi_master_get_devdata(spi->controller);
u32 *ausd = spi->controller_state;
unsigned int mr = at91_usart_spi_readl(aus, MR);
- u8 bits = spi->bits_per_word;
-
- if (bits != 8) {
- dev_dbg(&spi->dev, "Only 8 bits per word are supported\n");
- return -EINVAL;
- }
if (spi->mode & SPI_CPOL)
mr |= US_MR_CPOL;
@@ -212,7 +206,7 @@ static int at91_usart_spi_setup(struct spi_device *spi)
dev_dbg(&spi->dev,
"setup: bpw %u mode 0x%x -> mr %d %08x\n",
- bits, spi->mode, spi->chip_select, mr);
+ spi->bits_per_word, spi->mode, spi->chip_select, mr);
return 0;
}
diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index 35aebdfd3b4e..8aa22713c483 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -335,20 +335,6 @@ static int bcm2835_spi_transfer_one_irq(struct spi_master *master,
return 1;
}
-/*
- * DMA support
- *
- * this implementation has currently a few issues in so far as it does
- * not work arrount limitations of the HW.
- *
- * the main one being that DMA transfers are limited to 16 bit
- * (so 0 to 65535 bytes) by the SPI HW due to BCM2835_SPI_DLEN
- *
- * there may be a few more border-cases we may need to address as well
- * but unfortunately this would mean splitting up the scatter-gather
- * list making it slightly unpractical...
- */
-
/**
* bcm2835_spi_transfer_prologue() - transfer first few bytes without DMA
* @master: SPI master
@@ -630,19 +616,6 @@ static bool bcm2835_spi_can_dma(struct spi_master *master,
if (tfr->len < BCM2835_SPI_DMA_MIN_LENGTH)
return false;
- /* BCM2835_SPI_DLEN has defined a max transfer size as
- * 16 bit, so max is 65535
- * we can revisit this by using an alternative transfer
- * method - ideally this would get done without any more
- * interaction...
- */
- if (tfr->len > 65535) {
- dev_warn_once(&spi->dev,
- "transfer size of %d too big for dma-transfer\n",
- tfr->len);
- return false;
- }
-
/* return OK */
return true;
}
@@ -707,7 +680,6 @@ static void bcm2835_dma_init(struct spi_master *master, struct device *dev)
/* all went well, so set can_dma */
master->can_dma = bcm2835_spi_can_dma;
- master->max_dma_len = 65535; /* limitation by BCM2835_SPI_DLEN */
/* need to do TX AND RX DMA, so we need dummy buffers */
master->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX;
@@ -844,6 +816,17 @@ static int bcm2835_spi_prepare_message(struct spi_master *master,
struct spi_device *spi = msg->spi;
struct bcm2835_spi *bs = spi_master_get_devdata(master);
u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);
+ int ret;
+
+ /*
+ * DMA transfers are limited to 16 bit (0 to 65535 bytes) by the SPI HW
+ * due to DLEN. Split up transfers (32-bit FIFO aligned) if the limit is
+ * exceeded.
+ */
+ ret = spi_split_transfers_maxsize(master, msg, 65532,
+ GFP_KERNEL | GFP_DMA);
+ if (ret)
+ return ret;
cs &= ~(BCM2835_SPI_CS_CPOL | BCM2835_SPI_CS_CPHA);
diff --git a/drivers/spi/spi-bcm2835aux.c b/drivers/spi/spi-bcm2835aux.c
index f7e054848ca5..bbf87adb3ff8 100644
--- a/drivers/spi/spi-bcm2835aux.c
+++ b/drivers/spi/spi-bcm2835aux.c
@@ -21,6 +21,7 @@
#include <linux/clk.h>
#include <linux/completion.h>
+#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/interrupt.h>
@@ -36,6 +37,12 @@
#include <linux/spi/spi.h>
#include <linux/spinlock.h>
+/* define polling limits */
+static unsigned int polling_limit_us = 30;
+module_param(polling_limit_us, uint, 0664);
+MODULE_PARM_DESC(polling_limit_us,
+ "time in us to run a transfer in polling mode - if zero no polling is used\n");
+
/*
* spi register defines
*
@@ -88,10 +95,6 @@
#define BCM2835_AUX_SPI_STAT_BUSY 0x00000040
#define BCM2835_AUX_SPI_STAT_BITCOUNT 0x0000003F
-/* timeout values */
-#define BCM2835_AUX_SPI_POLLING_LIMIT_US 30
-#define BCM2835_AUX_SPI_POLLING_JIFFIES 2
-
struct bcm2835aux_spi {
void __iomem *regs;
struct clk *clk;
@@ -102,8 +105,53 @@ struct bcm2835aux_spi {
int tx_len;
int rx_len;
int pending;
+
+ u64 count_transfer_polling;
+ u64 count_transfer_irq;
+ u64 count_transfer_irq_after_poll;
+
+ struct dentry *debugfs_dir;
};
+#if defined(CONFIG_DEBUG_FS)
+static void bcm2835aux_debugfs_create(struct bcm2835aux_spi *bs,
+ const char *dname)
+{
+ char name[64];
+ struct dentry *dir;
+
+ /* get full name */
+ snprintf(name, sizeof(name), "spi-bcm2835aux-%s", dname);
+
+ /* the base directory */
+ dir = debugfs_create_dir(name, NULL);
+ bs->debugfs_dir = dir;
+
+ /* the counters */
+ debugfs_create_u64("count_transfer_polling", 0444, dir,
+ &bs->count_transfer_polling);
+ debugfs_create_u64("count_transfer_irq", 0444, dir,
+ &bs->count_transfer_irq);
+ debugfs_create_u64("count_transfer_irq_after_poll", 0444, dir,
+ &bs->count_transfer_irq_after_poll);
+}
+
+static void bcm2835aux_debugfs_remove(struct bcm2835aux_spi *bs)
+{
+ debugfs_remove_recursive(bs->debugfs_dir);
+ bs->debugfs_dir = NULL;
+}
+#else
+static void bcm2835aux_debugfs_create(struct bcm2835aux_spi *bs,
+ const char *dname)
+{
+}
+
+static void bcm2835aux_debugfs_remove(struct bcm2835aux_spi *bs)
+{
+}
+#endif /* CONFIG_DEBUG_FS */
+
static inline u32 bcm2835aux_rd(struct bcm2835aux_spi *bs, unsigned reg)
{
return readl(bs->regs + reg);
@@ -123,9 +171,6 @@ static inline void bcm2835aux_rd_fifo(struct bcm2835aux_spi *bs)
data = bcm2835aux_rd(bs, BCM2835_AUX_SPI_IO);
if (bs->rx_buf) {
switch (count) {
- case 4:
- *bs->rx_buf++ = (data >> 24) & 0xff;
- /* fallthrough */
case 3:
*bs->rx_buf++ = (data >> 16) & 0xff;
/* fallthrough */
@@ -178,24 +223,14 @@ static void bcm2835aux_spi_reset_hw(struct bcm2835aux_spi *bs)
BCM2835_AUX_SPI_CNTL0_CLEARFIFO);
}
-static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id)
+static void bcm2835aux_spi_transfer_helper(struct bcm2835aux_spi *bs)
{
- struct spi_master *master = dev_id;
- struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
- irqreturn_t ret = IRQ_NONE;
-
- /* IRQ may be shared, so return if our interrupts are disabled */
- if (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_CNTL1) &
- (BCM2835_AUX_SPI_CNTL1_TXEMPTY | BCM2835_AUX_SPI_CNTL1_IDLE)))
- return ret;
+ u32 stat = bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT);
/* check if we have data to read */
- while (bs->rx_len &&
- (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) &
- BCM2835_AUX_SPI_STAT_RX_EMPTY))) {
+ for (; bs->rx_len && (stat & BCM2835_AUX_SPI_STAT_RX_LVL);
+ stat = bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT))
bcm2835aux_rd_fifo(bs);
- ret = IRQ_HANDLED;
- }
/* check if we have data to write */
while (bs->tx_len &&
@@ -203,16 +238,21 @@ static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id)
(!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) &
BCM2835_AUX_SPI_STAT_TX_FULL))) {
bcm2835aux_wr_fifo(bs);
- ret = IRQ_HANDLED;
}
+}
- /* and check if we have reached "done" */
- while (bs->rx_len &&
- (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) &
- BCM2835_AUX_SPI_STAT_BUSY))) {
- bcm2835aux_rd_fifo(bs);
- ret = IRQ_HANDLED;
- }
+static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id)
+{
+ struct spi_master *master = dev_id;
+ struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+
+ /* IRQ may be shared, so return if our interrupts are disabled */
+ if (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_CNTL1) &
+ (BCM2835_AUX_SPI_CNTL1_TXEMPTY | BCM2835_AUX_SPI_CNTL1_IDLE)))
+ return IRQ_NONE;
+
+ /* do common fifo handling */
+ bcm2835aux_spi_transfer_helper(bs);
if (!bs->tx_len) {
/* disable tx fifo empty interrupt */
@@ -226,8 +266,7 @@ static irqreturn_t bcm2835aux_spi_interrupt(int irq, void *dev_id)
complete(&master->xfer_completion);
}
- /* and return */
- return ret;
+ return IRQ_HANDLED;
}
static int __bcm2835aux_spi_transfer_one_irq(struct spi_master *master,
@@ -251,6 +290,9 @@ static int bcm2835aux_spi_transfer_one_irq(struct spi_master *master,
{
struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+ /* update statistics */
+ bs->count_transfer_irq++;
+
/* fill in registers and fifos before enabling interrupts */
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]);
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL0, bs->cntl[0]);
@@ -273,35 +315,22 @@ static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master,
{
struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
unsigned long timeout;
- u32 stat;
+
+ /* update statistics */
+ bs->count_transfer_polling++;
/* configure spi */
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL1, bs->cntl[1]);
bcm2835aux_wr(bs, BCM2835_AUX_SPI_CNTL0, bs->cntl[0]);
- /* set the timeout */
- timeout = jiffies + BCM2835_AUX_SPI_POLLING_JIFFIES;
+ /* set the timeout to at least 2 jiffies */
+ timeout = jiffies + 2 + HZ * polling_limit_us / 1000000;
/* loop until finished the transfer */
while (bs->rx_len) {
- /* read status */
- stat = bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT);
- /* fill in tx fifo with remaining data */
- if ((bs->tx_len) && (!(stat & BCM2835_AUX_SPI_STAT_TX_FULL))) {
- bcm2835aux_wr_fifo(bs);
- continue;
- }
-
- /* read data from fifo for both cases */
- if (!(stat & BCM2835_AUX_SPI_STAT_RX_EMPTY)) {
- bcm2835aux_rd_fifo(bs);
- continue;
- }
- if (!(stat & BCM2835_AUX_SPI_STAT_BUSY)) {
- bcm2835aux_rd_fifo(bs);
- continue;
- }
+ /* do common fifo handling */
+ bcm2835aux_spi_transfer_helper(bs);
/* there is still data pending to read check the timeout */
if (bs->rx_len && time_after(jiffies, timeout)) {
@@ -310,6 +339,7 @@ static int bcm2835aux_spi_transfer_one_poll(struct spi_master *master,
jiffies - timeout,
bs->tx_len, bs->rx_len);
/* forward to interrupt handler */
+ bs->count_transfer_irq_after_poll++;
return __bcm2835aux_spi_transfer_one_irq(master,
spi, tfr);
}
@@ -324,8 +354,8 @@ static int bcm2835aux_spi_transfer_one(struct spi_master *master,
struct spi_transfer *tfr)
{
struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
- unsigned long spi_hz, clk_hz, speed;
- unsigned long spi_used_hz;
+ unsigned long spi_hz, clk_hz, speed, spi_used_hz;
+ unsigned long hz_per_byte, byte_limit;
/* calculate the registers to handle
*
@@ -369,14 +399,15 @@ static int bcm2835aux_spi_transfer_one(struct spi_master *master,
* of Hz per byte per polling limit. E.g., we can transfer 1 byte in
* 30 µs per 300,000 Hz of bus clock.
*/
-#define HZ_PER_BYTE ((9 * 1000000) / BCM2835_AUX_SPI_POLLING_LIMIT_US)
+ hz_per_byte = polling_limit_us ? (9 * 1000000) / polling_limit_us : 0;
+ byte_limit = hz_per_byte ? spi_used_hz / hz_per_byte : 1;
+
/* run in polling mode for short transfers */
- if (tfr->len < spi_used_hz / HZ_PER_BYTE)
+ if (tfr->len < byte_limit)
return bcm2835aux_spi_transfer_one_poll(master, spi, tfr);
/* run in interrupt mode for all others */
return bcm2835aux_spi_transfer_one_irq(master, spi, tfr);
-#undef HZ_PER_BYTE
}
static int bcm2835aux_spi_prepare_message(struct spi_master *master,
@@ -421,6 +452,50 @@ static void bcm2835aux_spi_handle_err(struct spi_master *master,
bcm2835aux_spi_reset_hw(bs);
}
+static int bcm2835aux_spi_setup(struct spi_device *spi)
+{
+ int ret;
+
+ /* sanity check for native cs */
+ if (spi->mode & SPI_NO_CS)
+ return 0;
+ if (gpio_is_valid(spi->cs_gpio)) {
+ /* with gpio-cs set the GPIO to the correct level
+ * and as output (in case the dt has the gpio not configured
+ * as output but native cs)
+ */
+ ret = gpio_direction_output(spi->cs_gpio,
+ (spi->mode & SPI_CS_HIGH) ? 0 : 1);
+ if (ret)
+ dev_err(&spi->dev,
+ "could not set gpio %i as output: %i\n",
+ spi->cs_gpio, ret);
+
+ return ret;
+ }
+
+ /* for dt-backwards compatibility: only support native on CS0
+ * known things not supported with broken native CS:
+ * * multiple chip-selects: cs0-cs2 are all
+ * simultaniously asserted whenever there is a transfer
+ * this even includes SPI_NO_CS
+ * * SPI_CS_HIGH: cs are always asserted low
+ * * cs_change: cs is deasserted after each spi_transfer
+ * * cs_delay_usec: cs is always deasserted one SCK cycle
+ * after the last transfer
+ * probably more...
+ */
+ dev_warn(&spi->dev,
+ "Native CS is not supported - please configure cs-gpio in device-tree\n");
+
+ if (spi->chip_select == 0)
+ return 0;
+
+ dev_warn(&spi->dev, "Native CS is not working for cs > 0\n");
+
+ return -EINVAL;
+}
+
static int bcm2835aux_spi_probe(struct platform_device *pdev)
{
struct spi_master *master;
@@ -438,7 +513,19 @@ static int bcm2835aux_spi_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, master);
master->mode_bits = (SPI_CPOL | SPI_CS_HIGH | SPI_NO_CS);
master->bits_per_word_mask = SPI_BPW_MASK(8);
- master->num_chipselect = -1;
+ /* even though the driver never officially supported native CS
+ * allow a single native CS for legacy DT support purposes when
+ * no cs-gpio is configured.
+ * Known limitations for native cs are:
+ * * multiple chip-selects: cs0-cs2 are all simultaniously asserted
+ * whenever there is a transfer - this even includes SPI_NO_CS
+ * * SPI_CS_HIGH: is ignores - cs are always asserted low
+ * * cs_change: cs is deasserted after each spi_transfer
+ * * cs_delay_usec: cs is always deasserted one SCK cycle after
+ * a spi_transfer
+ */
+ master->num_chipselect = 1;
+ master->setup = bcm2835aux_spi_setup;
master->transfer_one = bcm2835aux_spi_transfer_one;
master->handle_err = bcm2835aux_spi_handle_err;
master->prepare_message = bcm2835aux_spi_prepare_message;
@@ -502,6 +589,8 @@ static int bcm2835aux_spi_probe(struct platform_device *pdev)
goto out_clk_disable;
}
+ bcm2835aux_debugfs_create(bs, dev_name(&pdev->dev));
+
return 0;
out_clk_disable:
@@ -516,6 +605,8 @@ static int bcm2835aux_spi_remove(struct platform_device *pdev)
struct spi_master *master = platform_get_drvdata(pdev);
struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
+ bcm2835aux_debugfs_remove(bs);
+
bcm2835aux_spi_reset_hw(bs);
/* disable the HW block by releasing the clock */
diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c
index dd9a8c54a693..4243e53f9f7b 100644
--- a/drivers/spi/spi-bitbang.c
+++ b/drivers/spi/spi-bitbang.c
@@ -335,6 +335,42 @@ static void spi_bitbang_set_cs(struct spi_device *spi, bool enable)
/*----------------------------------------------------------------------*/
+int spi_bitbang_init(struct spi_bitbang *bitbang)
+{
+ struct spi_master *master = bitbang->master;
+
+ if (!master || !bitbang->chipselect)
+ return -EINVAL;
+
+ mutex_init(&bitbang->lock);
+
+ if (!master->mode_bits)
+ master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags;
+
+ if (master->transfer || master->transfer_one_message)
+ return -EINVAL;
+
+ master->prepare_transfer_hardware = spi_bitbang_prepare_hardware;
+ master->unprepare_transfer_hardware = spi_bitbang_unprepare_hardware;
+ master->transfer_one = spi_bitbang_transfer_one;
+ master->set_cs = spi_bitbang_set_cs;
+
+ if (!bitbang->txrx_bufs) {
+ bitbang->use_dma = 0;
+ bitbang->txrx_bufs = spi_bitbang_bufs;
+ if (!master->setup) {
+ if (!bitbang->setup_transfer)
+ bitbang->setup_transfer =
+ spi_bitbang_setup_transfer;
+ master->setup = spi_bitbang_setup;
+ master->cleanup = spi_bitbang_cleanup;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(spi_bitbang_init);
+
/**
* spi_bitbang_start - start up a polled/bitbanging SPI master driver
* @bitbang: driver handle
@@ -368,33 +404,9 @@ int spi_bitbang_start(struct spi_bitbang *bitbang)
struct spi_master *master = bitbang->master;
int ret;
- if (!master || !bitbang->chipselect)
- return -EINVAL;
-
- mutex_init(&bitbang->lock);
-
- if (!master->mode_bits)
- master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags;
-
- if (master->transfer || master->transfer_one_message)
- return -EINVAL;
-
- master->prepare_transfer_hardware = spi_bitbang_prepare_hardware;
- master->unprepare_transfer_hardware = spi_bitbang_unprepare_hardware;
- master->transfer_one = spi_bitbang_transfer_one;
- master->set_cs = spi_bitbang_set_cs;
-
- if (!bitbang->txrx_bufs) {
- bitbang->use_dma = 0;
- bitbang->txrx_bufs = spi_bitbang_bufs;
- if (!master->setup) {
- if (!bitbang->setup_transfer)
- bitbang->setup_transfer =
- spi_bitbang_setup_transfer;
- master->setup = spi_bitbang_setup;
- master->cleanup = spi_bitbang_cleanup;
- }
- }
+ ret = spi_bitbang_init(bitbang);
+ if (ret)
+ return ret;
/* driver may get busy before register() returns, especially
* if someone registered boardinfo for devices
diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
index 4bd59a93d988..de952b17bc10 100644
--- a/drivers/spi/spi-dw-mmio.c
+++ b/drivers/spi/spi-dw-mmio.c
@@ -30,6 +30,7 @@
struct dw_spi_mmio {
struct dw_spi dws;
struct clk *clk;
+ struct clk *pclk;
void *priv;
};
@@ -172,6 +173,14 @@ static int dw_spi_mmio_probe(struct platform_device *pdev)
if (ret)
return ret;
+ /* Optional clock needed to access the registers */
+ dwsmmio->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
+ if (IS_ERR(dwsmmio->pclk))
+ return PTR_ERR(dwsmmio->pclk);
+ ret = clk_prepare_enable(dwsmmio->pclk);
+ if (ret)
+ goto out_clk;
+
dws->bus_num = pdev->id;
dws->max_freq = clk_get_rate(dwsmmio->clk);
@@ -199,6 +208,8 @@ static int dw_spi_mmio_probe(struct platform_device *pdev)
return 0;
out:
+ clk_disable_unprepare(dwsmmio->pclk);
+out_clk:
clk_disable_unprepare(dwsmmio->clk);
return ret;
}
@@ -208,6 +219,7 @@ static int dw_spi_mmio_remove(struct platform_device *pdev)
struct dw_spi_mmio *dwsmmio = platform_get_drvdata(pdev);
dw_spi_remove_host(&dwsmmio->dws);
+ clk_disable_unprepare(dwsmmio->pclk);
clk_disable_unprepare(dwsmmio->clk);
return 0;
diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
index 79fc3940245a..47e39251bad9 100644
--- a/drivers/spi/spi-ep93xx.c
+++ b/drivers/spi/spi-ep93xx.c
@@ -28,7 +28,6 @@
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/scatterlist.h>
-#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/platform_data/dma-ep93xx.h>
@@ -676,6 +675,7 @@ static int ep93xx_spi_probe(struct platform_device *pdev)
if (!master)
return -ENOMEM;
+ master->use_gpio_descriptors = true;
master->prepare_transfer_hardware = ep93xx_spi_prepare_hardware;
master->unprepare_transfer_hardware = ep93xx_spi_unprepare_hardware;
master->prepare_message = ep93xx_spi_prepare_message;
@@ -683,31 +683,11 @@ static int ep93xx_spi_probe(struct platform_device *pdev)
master->bus_num = pdev->id;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16);
-
- master->num_chipselect = info->num_chipselect;
- master->cs_gpios = devm_kcalloc(&master->dev,
- master->num_chipselect, sizeof(int),
- GFP_KERNEL);
- if (!master->cs_gpios) {
- error = -ENOMEM;
- goto fail_release_master;
- }
-
- for (i = 0; i < master->num_chipselect; i++) {
- master->cs_gpios[i] = info->chipselect[i];
-
- if (!gpio_is_valid(master->cs_gpios[i]))
- continue;
-
- error = devm_gpio_request_one(&pdev->dev, master->cs_gpios[i],
- GPIOF_OUT_INIT_HIGH,
- "ep93xx-spi");
- if (error) {
- dev_err(&pdev->dev, "could not request cs gpio %d\n",
- master->cs_gpios[i]);
- goto fail_release_master;
- }
- }
+ /*
+ * The SPI core will count the number of GPIO descriptors to figure
+ * out the number of chip selects available on the platform.
+ */
+ master->num_chipselect = 0;
platform_set_drvdata(pdev, master);
diff --git a/drivers/spi/spi-fsl-lib.h b/drivers/spi/spi-fsl-lib.h
index f303f306b38e..483734bc1b1e 100644
--- a/drivers/spi/spi-fsl-lib.h
+++ b/drivers/spi/spi-fsl-lib.h
@@ -95,8 +95,10 @@ static inline u32 mpc8xxx_spi_read_reg(__be32 __iomem *reg)
struct mpc8xxx_spi_probe_info {
struct fsl_spi_platform_data pdata;
+ int ngpios;
int *gpios;
bool *alow_flags;
+ __be32 __iomem *immr_spi_cs;
};
extern u32 mpc8xxx_spi_tx_buf_u8(struct mpc8xxx_spi *mpc8xxx_spi);
diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index 9e117c4635d8..d08e9324140e 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -8,7 +8,10 @@
#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
#include <linux/err.h>
+#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
@@ -16,7 +19,12 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/dma-imx.h>
+#include <linux/platform_data/spi-imx.h>
+#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
@@ -24,6 +32,11 @@
#define DRIVER_NAME "fsl_lpspi"
+#define FSL_LPSPI_RPM_TIMEOUT 50 /* 50ms */
+
+/* The maximum bytes that edma can transfer once.*/
+#define FSL_LPSPI_MAX_EDMA_BYTES ((1 << 15) - 1)
+
/* i.MX7ULP LPSPI registers */
#define IMX7ULP_VERID 0x0
#define IMX7ULP_PARAM 0x4
@@ -57,6 +70,8 @@
#define IER_FCIE BIT(9)
#define IER_RDIE BIT(1)
#define IER_TDIE BIT(0)
+#define DER_RDDE BIT(1)
+#define DER_TDDE BIT(0)
#define CFGR1_PCSCFG BIT(27)
#define CFGR1_PINCFG (BIT(24)|BIT(25))
#define CFGR1_PCSPOL BIT(8)
@@ -84,8 +99,11 @@ struct lpspi_config {
struct fsl_lpspi_data {
struct device *dev;
void __iomem *base;
- struct clk *clk;
+ unsigned long base_phys;
+ struct clk *clk_ipg;
+ struct clk *clk_per;
bool is_slave;
+ bool is_first_byte;
void *rx_buf;
const void *tx_buf;
@@ -101,6 +119,13 @@ struct fsl_lpspi_data {
struct completion xfer_done;
bool slave_aborted;
+
+ /* DMA */
+ bool usedma;
+ struct completion dma_rx_completion;
+ struct completion dma_tx_completion;
+
+ int chipselect[0];
};
static const struct of_device_id fsl_lpspi_dt_ids[] = {
@@ -147,12 +172,48 @@ static void fsl_lpspi_intctrl(struct fsl_lpspi_data *fsl_lpspi,
writel(enable, fsl_lpspi->base + IMX7ULP_IER);
}
+static int fsl_lpspi_bytes_per_word(const int bpw)
+{
+ return DIV_ROUND_UP(bpw, BITS_PER_BYTE);
+}
+
+static bool fsl_lpspi_can_dma(struct spi_controller *controller,
+ struct spi_device *spi,
+ struct spi_transfer *transfer)
+{
+ unsigned int bytes_per_word;
+
+ if (!controller->dma_rx)
+ return false;
+
+ bytes_per_word = fsl_lpspi_bytes_per_word(transfer->bits_per_word);
+
+ switch (bytes_per_word)
+ {
+ case 1:
+ case 2:
+ case 4:
+ break;
+ default:
+ return false;
+ }
+
+ return true;
+}
+
static int lpspi_prepare_xfer_hardware(struct spi_controller *controller)
{
struct fsl_lpspi_data *fsl_lpspi =
spi_controller_get_devdata(controller);
+ int ret;
+
+ ret = pm_runtime_get_sync(fsl_lpspi->dev);
+ if (ret < 0) {
+ dev_err(fsl_lpspi->dev, "failed to enable clock\n");
+ return ret;
+ }
- return clk_prepare_enable(fsl_lpspi->clk);
+ return 0;
}
static int lpspi_unprepare_xfer_hardware(struct spi_controller *controller)
@@ -160,7 +221,22 @@ static int lpspi_unprepare_xfer_hardware(struct spi_controller *controller)
struct fsl_lpspi_data *fsl_lpspi =
spi_controller_get_devdata(controller);
- clk_disable_unprepare(fsl_lpspi->clk);
+ pm_runtime_mark_last_busy(fsl_lpspi->dev);
+ pm_runtime_put_autosuspend(fsl_lpspi->dev);
+
+ return 0;
+}
+
+static int fsl_lpspi_prepare_message(struct spi_controller *controller,
+ struct spi_message *msg)
+{
+ struct fsl_lpspi_data *fsl_lpspi =
+ spi_controller_get_devdata(controller);
+ struct spi_device *spi = msg->spi;
+ int gpio = fsl_lpspi->chipselect[spi->chip_select];
+
+ if (gpio_is_valid(gpio))
+ gpio_direction_output(gpio, spi->mode & SPI_CS_HIGH ? 0 : 1);
return 0;
}
@@ -197,8 +273,7 @@ static void fsl_lpspi_read_rx_fifo(struct fsl_lpspi_data *fsl_lpspi)
fsl_lpspi->rx(fsl_lpspi);
}
-static void fsl_lpspi_set_cmd(struct fsl_lpspi_data *fsl_lpspi,
- bool is_first_xfer)
+static void fsl_lpspi_set_cmd(struct fsl_lpspi_data *fsl_lpspi)
{
u32 temp = 0;
@@ -213,11 +288,13 @@ static void fsl_lpspi_set_cmd(struct fsl_lpspi_data *fsl_lpspi,
* For the first transfer, clear TCR_CONTC to assert SS.
* For subsequent transfer, set TCR_CONTC to keep SS asserted.
*/
- temp |= TCR_CONT;
- if (is_first_xfer)
- temp &= ~TCR_CONTC;
- else
- temp |= TCR_CONTC;
+ if (!fsl_lpspi->usedma) {
+ temp |= TCR_CONT;
+ if (fsl_lpspi->is_first_byte)
+ temp &= ~TCR_CONTC;
+ else
+ temp |= TCR_CONTC;
+ }
}
writel(temp, fsl_lpspi->base + IMX7ULP_TCR);
@@ -228,7 +305,11 @@ static void fsl_lpspi_set_watermark(struct fsl_lpspi_data *fsl_lpspi)
{
u32 temp;
- temp = fsl_lpspi->watermark >> 1 | (fsl_lpspi->watermark >> 1) << 16;
+ if (!fsl_lpspi->usedma)
+ temp = fsl_lpspi->watermark >> 1 |
+ (fsl_lpspi->watermark >> 1) << 16;
+ else
+ temp = fsl_lpspi->watermark >> 1;
writel(temp, fsl_lpspi->base + IMX7ULP_FCR);
@@ -241,7 +322,14 @@ static int fsl_lpspi_set_bitrate(struct fsl_lpspi_data *fsl_lpspi)
unsigned int perclk_rate, scldiv;
u8 prescale;
- perclk_rate = clk_get_rate(fsl_lpspi->clk);
+ perclk_rate = clk_get_rate(fsl_lpspi->clk_per);
+
+ if (config.speed_hz > perclk_rate / 2) {
+ dev_err(fsl_lpspi->dev,
+ "per-clk should be at least two times of transfer speed");
+ return -EINVAL;
+ }
+
for (prescale = 0; prescale < 8; prescale++) {
scldiv = perclk_rate /
(clkdivs[prescale] * config.speed_hz) - 2;
@@ -257,12 +345,59 @@ static int fsl_lpspi_set_bitrate(struct fsl_lpspi_data *fsl_lpspi)
writel(scldiv | (scldiv << 8) | ((scldiv >> 1) << 16),
fsl_lpspi->base + IMX7ULP_CCR);
- dev_dbg(fsl_lpspi->dev, "perclk=%d, speed=%d, prescale =%d, scldiv=%d\n",
+ dev_dbg(fsl_lpspi->dev, "perclk=%d, speed=%d, prescale=%d, scldiv=%d\n",
perclk_rate, config.speed_hz, prescale, scldiv);
return 0;
}
+static int fsl_lpspi_dma_configure(struct spi_controller *controller)
+{
+ int ret;
+ enum dma_slave_buswidth buswidth;
+ struct dma_slave_config rx = {}, tx = {};
+ struct fsl_lpspi_data *fsl_lpspi =
+ spi_controller_get_devdata(controller);
+
+ switch (fsl_lpspi_bytes_per_word(fsl_lpspi->config.bpw)) {
+ case 4:
+ buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ break;
+ case 2:
+ buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
+ break;
+ case 1:
+ buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ tx.direction = DMA_MEM_TO_DEV;
+ tx.dst_addr = fsl_lpspi->base_phys + IMX7ULP_TDR;
+ tx.dst_addr_width = buswidth;
+ tx.dst_maxburst = 1;
+ ret = dmaengine_slave_config(controller->dma_tx, &tx);
+ if (ret) {
+ dev_err(fsl_lpspi->dev, "TX dma configuration failed with %d\n",
+ ret);
+ return ret;
+ }
+
+ rx.direction = DMA_DEV_TO_MEM;
+ rx.src_addr = fsl_lpspi->base_phys + IMX7ULP_RDR;
+ rx.src_addr_width = buswidth;
+ rx.src_maxburst = 1;
+ ret = dmaengine_slave_config(controller->dma_rx, &rx);
+ if (ret) {
+ dev_err(fsl_lpspi->dev, "RX dma configuration failed with %d\n",
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+
static int fsl_lpspi_config(struct fsl_lpspi_data *fsl_lpspi)
{
u32 temp;
@@ -288,18 +423,27 @@ static int fsl_lpspi_config(struct fsl_lpspi_data *fsl_lpspi)
temp |= CR_RRF | CR_RTF | CR_MEN;
writel(temp, fsl_lpspi->base + IMX7ULP_CR);
+ temp = 0;
+ if (fsl_lpspi->usedma)
+ temp = DER_TDDE | DER_RDDE;
+ writel(temp, fsl_lpspi->base + IMX7ULP_DER);
+
return 0;
}
-static void fsl_lpspi_setup_transfer(struct spi_device *spi,
+static int fsl_lpspi_setup_transfer(struct spi_controller *controller,
+ struct spi_device *spi,
struct spi_transfer *t)
{
struct fsl_lpspi_data *fsl_lpspi =
spi_controller_get_devdata(spi->controller);
+ if (t == NULL)
+ return -EINVAL;
+
fsl_lpspi->config.mode = spi->mode;
- fsl_lpspi->config.bpw = t ? t->bits_per_word : spi->bits_per_word;
- fsl_lpspi->config.speed_hz = t ? t->speed_hz : spi->max_speed_hz;
+ fsl_lpspi->config.bpw = t->bits_per_word;
+ fsl_lpspi->config.speed_hz = t->speed_hz;
fsl_lpspi->config.chip_select = spi->chip_select;
if (!fsl_lpspi->config.speed_hz)
@@ -324,7 +468,12 @@ static void fsl_lpspi_setup_transfer(struct spi_device *spi,
else
fsl_lpspi->watermark = fsl_lpspi->txfifosize;
- fsl_lpspi_config(fsl_lpspi);
+ if (fsl_lpspi_can_dma(controller, spi, t))
+ fsl_lpspi->usedma = 1;
+ else
+ fsl_lpspi->usedma = 0;
+
+ return fsl_lpspi_config(fsl_lpspi);
}
static int fsl_lpspi_slave_abort(struct spi_controller *controller)
@@ -333,7 +482,13 @@ static int fsl_lpspi_slave_abort(struct spi_controller *controller)
spi_controller_get_devdata(controller);
fsl_lpspi->slave_aborted = true;
- complete(&fsl_lpspi->xfer_done);
+ if (!fsl_lpspi->usedma)
+ complete(&fsl_lpspi->xfer_done);
+ else {
+ complete(&fsl_lpspi->dma_tx_completion);
+ complete(&fsl_lpspi->dma_rx_completion);
+ }
+
return 0;
}
@@ -362,8 +517,10 @@ static int fsl_lpspi_reset(struct fsl_lpspi_data *fsl_lpspi)
{
u32 temp;
- /* Disable all interrupt */
- fsl_lpspi_intctrl(fsl_lpspi, 0);
+ if (!fsl_lpspi->usedma) {
+ /* Disable all interrupt */
+ fsl_lpspi_intctrl(fsl_lpspi, 0);
+ }
/* W1C for all flags in SR */
temp = 0x3F << 8;
@@ -376,8 +533,177 @@ static int fsl_lpspi_reset(struct fsl_lpspi_data *fsl_lpspi)
return 0;
}
-static int fsl_lpspi_transfer_one(struct spi_controller *controller,
- struct spi_device *spi,
+static void fsl_lpspi_dma_rx_callback(void *cookie)
+{
+ struct fsl_lpspi_data *fsl_lpspi = (struct fsl_lpspi_data *)cookie;
+
+ complete(&fsl_lpspi->dma_rx_completion);
+}
+
+static void fsl_lpspi_dma_tx_callback(void *cookie)
+{
+ struct fsl_lpspi_data *fsl_lpspi = (struct fsl_lpspi_data *)cookie;
+
+ complete(&fsl_lpspi->dma_tx_completion);
+}
+
+static int fsl_lpspi_calculate_timeout(struct fsl_lpspi_data *fsl_lpspi,
+ int size)
+{
+ unsigned long timeout = 0;
+
+ /* Time with actual data transfer and CS change delay related to HW */
+ timeout = (8 + 4) * size / fsl_lpspi->config.speed_hz;
+
+ /* Add extra second for scheduler related activities */
+ timeout += 1;
+
+ /* Double calculated timeout */
+ return msecs_to_jiffies(2 * timeout * MSEC_PER_SEC);
+}
+
+static int fsl_lpspi_dma_transfer(struct spi_controller *controller,
+ struct fsl_lpspi_data *fsl_lpspi,
+ struct spi_transfer *transfer)
+{
+ struct dma_async_tx_descriptor *desc_tx, *desc_rx;
+ unsigned long transfer_timeout;
+ unsigned long timeout;
+ struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg;
+ int ret;
+
+ ret = fsl_lpspi_dma_configure(controller);
+ if (ret)
+ return ret;
+
+ desc_rx = dmaengine_prep_slave_sg(controller->dma_rx,
+ rx->sgl, rx->nents, DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc_rx)
+ return -EINVAL;
+
+ desc_rx->callback = fsl_lpspi_dma_rx_callback;
+ desc_rx->callback_param = (void *)fsl_lpspi;
+ dmaengine_submit(desc_rx);
+ reinit_completion(&fsl_lpspi->dma_rx_completion);
+ dma_async_issue_pending(controller->dma_rx);
+
+ desc_tx = dmaengine_prep_slave_sg(controller->dma_tx,
+ tx->sgl, tx->nents, DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc_tx) {
+ dmaengine_terminate_all(controller->dma_tx);
+ return -EINVAL;
+ }
+
+ desc_tx->callback = fsl_lpspi_dma_tx_callback;
+ desc_tx->callback_param = (void *)fsl_lpspi;
+ dmaengine_submit(desc_tx);
+ reinit_completion(&fsl_lpspi->dma_tx_completion);
+ dma_async_issue_pending(controller->dma_tx);
+
+ fsl_lpspi->slave_aborted = false;
+
+ if (!fsl_lpspi->is_slave) {
+ transfer_timeout = fsl_lpspi_calculate_timeout(fsl_lpspi,
+ transfer->len);
+
+ /* Wait eDMA to finish the data transfer.*/
+ timeout = wait_for_completion_timeout(&fsl_lpspi->dma_tx_completion,
+ transfer_timeout);
+ if (!timeout) {
+ dev_err(fsl_lpspi->dev, "I/O Error in DMA TX\n");
+ dmaengine_terminate_all(controller->dma_tx);
+ dmaengine_terminate_all(controller->dma_rx);
+ fsl_lpspi_reset(fsl_lpspi);
+ return -ETIMEDOUT;
+ }
+
+ timeout = wait_for_completion_timeout(&fsl_lpspi->dma_rx_completion,
+ transfer_timeout);
+ if (!timeout) {
+ dev_err(fsl_lpspi->dev, "I/O Error in DMA RX\n");
+ dmaengine_terminate_all(controller->dma_tx);
+ dmaengine_terminate_all(controller->dma_rx);
+ fsl_lpspi_reset(fsl_lpspi);
+ return -ETIMEDOUT;
+ }
+ } else {
+ if (wait_for_completion_interruptible(&fsl_lpspi->dma_tx_completion) ||
+ fsl_lpspi->slave_aborted) {
+ dev_dbg(fsl_lpspi->dev,
+ "I/O Error in DMA TX interrupted\n");
+ dmaengine_terminate_all(controller->dma_tx);
+ dmaengine_terminate_all(controller->dma_rx);
+ fsl_lpspi_reset(fsl_lpspi);
+ return -EINTR;
+ }
+
+ if (wait_for_completion_interruptible(&fsl_lpspi->dma_rx_completion) ||
+ fsl_lpspi->slave_aborted) {
+ dev_dbg(fsl_lpspi->dev,
+ "I/O Error in DMA RX interrupted\n");
+ dmaengine_terminate_all(controller->dma_tx);
+ dmaengine_terminate_all(controller->dma_rx);
+ fsl_lpspi_reset(fsl_lpspi);
+ return -EINTR;
+ }
+ }
+
+ fsl_lpspi_reset(fsl_lpspi);
+
+ return 0;
+}
+
+static void fsl_lpspi_dma_exit(struct spi_controller *controller)
+{
+ if (controller->dma_rx) {
+ dma_release_channel(controller->dma_rx);
+ controller->dma_rx = NULL;
+ }
+
+ if (controller->dma_tx) {
+ dma_release_channel(controller->dma_tx);
+ controller->dma_tx = NULL;
+ }
+}
+
+static int fsl_lpspi_dma_init(struct device *dev,
+ struct fsl_lpspi_data *fsl_lpspi,
+ struct spi_controller *controller)
+{
+ int ret;
+
+ /* Prepare for TX DMA: */
+ controller->dma_tx = dma_request_slave_channel_reason(dev, "tx");
+ if (IS_ERR(controller->dma_tx)) {
+ ret = PTR_ERR(controller->dma_tx);
+ dev_dbg(dev, "can't get the TX DMA channel, error %d!\n", ret);
+ controller->dma_tx = NULL;
+ goto err;
+ }
+
+ /* Prepare for RX DMA: */
+ controller->dma_rx = dma_request_slave_channel_reason(dev, "rx");
+ if (IS_ERR(controller->dma_rx)) {
+ ret = PTR_ERR(controller->dma_rx);
+ dev_dbg(dev, "can't get the RX DMA channel, error %d\n", ret);
+ controller->dma_rx = NULL;
+ goto err;
+ }
+
+ init_completion(&fsl_lpspi->dma_rx_completion);
+ init_completion(&fsl_lpspi->dma_tx_completion);
+ controller->can_dma = fsl_lpspi_can_dma;
+ controller->max_dma_len = FSL_LPSPI_MAX_EDMA_BYTES;
+
+ return 0;
+err:
+ fsl_lpspi_dma_exit(controller);
+ return ret;
+}
+
+static int fsl_lpspi_pio_transfer(struct spi_controller *controller,
struct spi_transfer *t)
{
struct fsl_lpspi_data *fsl_lpspi =
@@ -402,37 +728,30 @@ static int fsl_lpspi_transfer_one(struct spi_controller *controller,
return 0;
}
-static int fsl_lpspi_transfer_one_msg(struct spi_controller *controller,
- struct spi_message *msg)
+static int fsl_lpspi_transfer_one(struct spi_controller *controller,
+ struct spi_device *spi,
+ struct spi_transfer *t)
{
struct fsl_lpspi_data *fsl_lpspi =
- spi_controller_get_devdata(controller);
- struct spi_device *spi = msg->spi;
- struct spi_transfer *xfer;
- bool is_first_xfer = true;
- int ret = 0;
-
- msg->status = 0;
- msg->actual_length = 0;
-
- list_for_each_entry(xfer, &msg->transfers, transfer_list) {
- fsl_lpspi_setup_transfer(spi, xfer);
- fsl_lpspi_set_cmd(fsl_lpspi, is_first_xfer);
-
- is_first_xfer = false;
+ spi_controller_get_devdata(controller);
+ int ret;
- ret = fsl_lpspi_transfer_one(controller, spi, xfer);
- if (ret < 0)
- goto complete;
+ fsl_lpspi->is_first_byte = true;
+ ret = fsl_lpspi_setup_transfer(controller, spi, t);
+ if (ret < 0)
+ return ret;
- msg->actual_length += xfer->len;
- }
+ fsl_lpspi_set_cmd(fsl_lpspi);
+ fsl_lpspi->is_first_byte = false;
-complete:
- msg->status = ret;
- spi_finalize_current_message(controller);
+ if (fsl_lpspi->usedma)
+ ret = fsl_lpspi_dma_transfer(controller, fsl_lpspi, t);
+ else
+ ret = fsl_lpspi_pio_transfer(controller, t);
+ if (ret < 0)
+ return ret;
- return ret;
+ return 0;
}
static irqreturn_t fsl_lpspi_isr(int irq, void *dev_id)
@@ -467,15 +786,67 @@ static irqreturn_t fsl_lpspi_isr(int irq, void *dev_id)
return IRQ_NONE;
}
+#ifdef CONFIG_PM
+static int fsl_lpspi_runtime_resume(struct device *dev)
+{
+ struct spi_controller *controller = dev_get_drvdata(dev);
+ struct fsl_lpspi_data *fsl_lpspi;
+ int ret;
+
+ fsl_lpspi = spi_controller_get_devdata(controller);
+
+ ret = clk_prepare_enable(fsl_lpspi->clk_per);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(fsl_lpspi->clk_ipg);
+ if (ret) {
+ clk_disable_unprepare(fsl_lpspi->clk_per);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int fsl_lpspi_runtime_suspend(struct device *dev)
+{
+ struct spi_controller *controller = dev_get_drvdata(dev);
+ struct fsl_lpspi_data *fsl_lpspi;
+
+ fsl_lpspi = spi_controller_get_devdata(controller);
+
+ clk_disable_unprepare(fsl_lpspi->clk_per);
+ clk_disable_unprepare(fsl_lpspi->clk_ipg);
+
+ return 0;
+}
+#endif
+
+static int fsl_lpspi_init_rpm(struct fsl_lpspi_data *fsl_lpspi)
+{
+ struct device *dev = fsl_lpspi->dev;
+
+ pm_runtime_enable(dev);
+ pm_runtime_set_autosuspend_delay(dev, FSL_LPSPI_RPM_TIMEOUT);
+ pm_runtime_use_autosuspend(dev);
+
+ return 0;
+}
+
static int fsl_lpspi_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
struct fsl_lpspi_data *fsl_lpspi;
struct spi_controller *controller;
+ struct spi_imx_master *lpspi_platform_info =
+ dev_get_platdata(&pdev->dev);
struct resource *res;
- int ret, irq;
+ int i, ret, irq;
u32 temp;
+ bool is_slave;
- if (of_property_read_bool((&pdev->dev)->of_node, "spi-slave"))
+ is_slave = of_property_read_bool((&pdev->dev)->of_node, "spi-slave");
+ if (is_slave)
controller = spi_alloc_slave(&pdev->dev,
sizeof(struct fsl_lpspi_data));
else
@@ -487,15 +858,35 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, controller);
- controller->bits_per_word_mask = SPI_BPW_RANGE_MASK(8, 32);
- controller->bus_num = pdev->id;
-
fsl_lpspi = spi_controller_get_devdata(controller);
fsl_lpspi->dev = &pdev->dev;
- fsl_lpspi->is_slave = of_property_read_bool((&pdev->dev)->of_node,
- "spi-slave");
+ fsl_lpspi->is_slave = is_slave;
- controller->transfer_one_message = fsl_lpspi_transfer_one_msg;
+ if (!fsl_lpspi->is_slave) {
+ for (i = 0; i < controller->num_chipselect; i++) {
+ int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
+
+ if (!gpio_is_valid(cs_gpio) && lpspi_platform_info)
+ cs_gpio = lpspi_platform_info->chipselect[i];
+
+ fsl_lpspi->chipselect[i] = cs_gpio;
+ if (!gpio_is_valid(cs_gpio))
+ continue;
+
+ ret = devm_gpio_request(&pdev->dev,
+ fsl_lpspi->chipselect[i],
+ DRIVER_NAME);
+ if (ret) {
+ dev_err(&pdev->dev, "can't get cs gpios\n");
+ goto out_controller_put;
+ }
+ }
+ controller->cs_gpios = fsl_lpspi->chipselect;
+ controller->prepare_message = fsl_lpspi_prepare_message;
+ }
+
+ controller->bits_per_word_mask = SPI_BPW_RANGE_MASK(8, 32);
+ controller->transfer_one = fsl_lpspi_transfer_one;
controller->prepare_transfer_hardware = lpspi_prepare_xfer_hardware;
controller->unprepare_transfer_hardware = lpspi_unprepare_xfer_hardware;
controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
@@ -512,6 +903,7 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
ret = PTR_ERR(fsl_lpspi->base);
goto out_controller_put;
}
+ fsl_lpspi->base_phys = res->start;
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
@@ -526,23 +918,39 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
goto out_controller_put;
}
- fsl_lpspi->clk = devm_clk_get(&pdev->dev, "ipg");
- if (IS_ERR(fsl_lpspi->clk)) {
- ret = PTR_ERR(fsl_lpspi->clk);
+ fsl_lpspi->clk_per = devm_clk_get(&pdev->dev, "per");
+ if (IS_ERR(fsl_lpspi->clk_per)) {
+ ret = PTR_ERR(fsl_lpspi->clk_per);
goto out_controller_put;
}
- ret = clk_prepare_enable(fsl_lpspi->clk);
- if (ret) {
- dev_err(&pdev->dev, "can't enable lpspi clock, ret=%d\n", ret);
+ fsl_lpspi->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+ if (IS_ERR(fsl_lpspi->clk_ipg)) {
+ ret = PTR_ERR(fsl_lpspi->clk_ipg);
+ goto out_controller_put;
+ }
+
+ /* enable the clock */
+ ret = fsl_lpspi_init_rpm(fsl_lpspi);
+ if (ret)
goto out_controller_put;
+
+ ret = pm_runtime_get_sync(fsl_lpspi->dev);
+ if (ret < 0) {
+ dev_err(fsl_lpspi->dev, "failed to enable clock\n");
+ return ret;
}
temp = readl(fsl_lpspi->base + IMX7ULP_PARAM);
fsl_lpspi->txfifosize = 1 << (temp & 0x0f);
fsl_lpspi->rxfifosize = 1 << ((temp >> 8) & 0x0f);
- clk_disable_unprepare(fsl_lpspi->clk);
+ ret = fsl_lpspi_dma_init(&pdev->dev, fsl_lpspi, controller);
+ if (ret == -EPROBE_DEFER)
+ goto out_controller_put;
+
+ if (ret < 0)
+ dev_err(&pdev->dev, "dma setup error %d, use pio\n", ret);
ret = devm_spi_register_controller(&pdev->dev, controller);
if (ret < 0) {
@@ -564,15 +972,50 @@ static int fsl_lpspi_remove(struct platform_device *pdev)
struct fsl_lpspi_data *fsl_lpspi =
spi_controller_get_devdata(controller);
- clk_disable_unprepare(fsl_lpspi->clk);
+ pm_runtime_disable(fsl_lpspi->dev);
+
+ spi_master_put(controller);
return 0;
}
+#ifdef CONFIG_PM_SLEEP
+static int fsl_lpspi_suspend(struct device *dev)
+{
+ int ret;
+
+ pinctrl_pm_select_sleep_state(dev);
+ ret = pm_runtime_force_suspend(dev);
+ return ret;
+}
+
+static int fsl_lpspi_resume(struct device *dev)
+{
+ int ret;
+
+ ret = pm_runtime_force_resume(dev);
+ if (ret) {
+ dev_err(dev, "Error in resume: %d\n", ret);
+ return ret;
+ }
+
+ pinctrl_pm_select_default_state(dev);
+
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct dev_pm_ops fsl_lpspi_pm_ops = {
+ SET_RUNTIME_PM_OPS(fsl_lpspi_runtime_suspend,
+ fsl_lpspi_runtime_resume, NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(fsl_lpspi_suspend, fsl_lpspi_resume)
+};
+
static struct platform_driver fsl_lpspi_driver = {
.driver = {
.name = DRIVER_NAME,
.of_match_table = fsl_lpspi_dt_ids,
+ .pm = &fsl_lpspi_pm_ops,
},
.probe = fsl_lpspi_probe,
.remove = fsl_lpspi_remove,
diff --git a/drivers/spi/spi-fsl-qspi.c b/drivers/spi/spi-fsl-qspi.c
index 6a713f78a62e..41a49b93ca60 100644
--- a/drivers/spi/spi-fsl-qspi.c
+++ b/drivers/spi/spi-fsl-qspi.c
@@ -882,7 +882,7 @@ static int fsl_qspi_probe(struct platform_device *pdev)
ctlr->dev.of_node = np;
- ret = spi_register_controller(ctlr);
+ ret = devm_spi_register_controller(dev, ctlr);
if (ret)
goto err_destroy_mutex;
diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index 8f2e97857e8b..b36ac6aa3b1f 100644
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -39,6 +39,14 @@
#include <linux/spi/spi_bitbang.h>
#include <linux/types.h>
+#ifdef CONFIG_FSL_SOC
+#include <sysdev/fsl_soc.h>
+#endif
+
+/* Specific to the MPC8306/MPC8309 */
+#define IMMR_SPI_CS_OFFSET 0x14c
+#define SPI_BOOT_SEL_BIT 0x80000000
+
#include "spi-fsl-lib.h"
#include "spi-fsl-cpm.h"
#include "spi-fsl-spi.h"
@@ -355,33 +363,50 @@ static int fsl_spi_bufs(struct spi_device *spi, struct spi_transfer *t,
static int fsl_spi_do_one_msg(struct spi_master *master,
struct spi_message *m)
{
+ struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(master);
struct spi_device *spi = m->spi;
struct spi_transfer *t, *first;
unsigned int cs_change;
const int nsecs = 50;
- int status;
+ int status, last_bpw;
+
+ /*
+ * In CPU mode, optimize large byte transfers to use larger
+ * bits_per_word values to reduce number of interrupts taken.
+ */
+ if (!(mpc8xxx_spi->flags & SPI_CPM_MODE)) {
+ list_for_each_entry(t, &m->transfers, transfer_list) {
+ if (t->len < 256 || t->bits_per_word != 8)
+ continue;
+ if ((t->len & 3) == 0)
+ t->bits_per_word = 32;
+ else if ((t->len & 1) == 0)
+ t->bits_per_word = 16;
+ }
+ }
/* Don't allow changes if CS is active */
- first = list_first_entry(&m->transfers, struct spi_transfer,
- transfer_list);
+ cs_change = 1;
list_for_each_entry(t, &m->transfers, transfer_list) {
- if ((first->bits_per_word != t->bits_per_word) ||
- (first->speed_hz != t->speed_hz)) {
+ if (cs_change)
+ first = t;
+ cs_change = t->cs_change;
+ if (first->speed_hz != t->speed_hz) {
dev_err(&spi->dev,
- "bits_per_word/speed_hz should be same for the same SPI transfer\n");
+ "speed_hz cannot change while CS is active\n");
return -EINVAL;
}
}
+ last_bpw = -1;
cs_change = 1;
status = -EINVAL;
list_for_each_entry(t, &m->transfers, transfer_list) {
- if (t->bits_per_word || t->speed_hz) {
- if (cs_change)
- status = fsl_spi_setup_transfer(spi, t);
- if (status < 0)
- break;
- }
+ if (cs_change || last_bpw != t->bits_per_word)
+ status = fsl_spi_setup_transfer(spi, t);
+ if (status < 0)
+ break;
+ last_bpw = t->bits_per_word;
if (cs_change) {
fsl_spi_chipselect(spi, BITBANG_CS_ACTIVE);
@@ -701,10 +726,17 @@ static void fsl_spi_cs_control(struct spi_device *spi, bool on)
struct fsl_spi_platform_data *pdata = dev_get_platdata(dev);
struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(pdata);
u16 cs = spi->chip_select;
- int gpio = pinfo->gpios[cs];
- bool alow = pinfo->alow_flags[cs];
- gpio_set_value(gpio, on ^ alow);
+ if (cs < pinfo->ngpios) {
+ int gpio = pinfo->gpios[cs];
+ bool alow = pinfo->alow_flags[cs];
+
+ gpio_set_value(gpio, on ^ alow);
+ } else {
+ if (WARN_ON_ONCE(cs > pinfo->ngpios || !pinfo->immr_spi_cs))
+ return;
+ iowrite32be(on ? SPI_BOOT_SEL_BIT : 0, pinfo->immr_spi_cs);
+ }
}
static int of_fsl_spi_get_chipselects(struct device *dev)
@@ -712,12 +744,15 @@ static int of_fsl_spi_get_chipselects(struct device *dev)
struct device_node *np = dev->of_node;
struct fsl_spi_platform_data *pdata = dev_get_platdata(dev);
struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(pdata);
+ bool spisel_boot = IS_ENABLED(CONFIG_FSL_SOC) &&
+ of_property_read_bool(np, "fsl,spisel_boot");
int ngpios;
int i = 0;
int ret;
ngpios = of_gpio_count(np);
- if (ngpios <= 0) {
+ ngpios = max(ngpios, 0);
+ if (ngpios == 0 && !spisel_boot) {
/*
* SPI w/o chip-select line. One SPI device is still permitted
* though.
@@ -726,6 +761,7 @@ static int of_fsl_spi_get_chipselects(struct device *dev)
return 0;
}
+ pinfo->ngpios = ngpios;
pinfo->gpios = kmalloc_array(ngpios, sizeof(*pinfo->gpios),
GFP_KERNEL);
if (!pinfo->gpios)
@@ -769,7 +805,18 @@ static int of_fsl_spi_get_chipselects(struct device *dev)
}
}
- pdata->max_chipselect = ngpios;
+#if IS_ENABLED(CONFIG_FSL_SOC)
+ if (spisel_boot) {
+ pinfo->immr_spi_cs = ioremap(get_immrbase() + IMMR_SPI_CS_OFFSET, 4);
+ if (!pinfo->immr_spi_cs) {
+ ret = -ENOMEM;
+ i = ngpios - 1;
+ goto err_loop;
+ }
+ }
+#endif
+
+ pdata->max_chipselect = ngpios + spisel_boot;
pdata->cs_control = fsl_spi_cs_control;
return 0;
diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index f22db00b51e4..487ee55d26f7 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -41,13 +41,10 @@
struct spi_gpio {
struct spi_bitbang bitbang;
- struct spi_gpio_platform_data pdata;
- struct platform_device *pdev;
struct gpio_desc *sck;
struct gpio_desc *miso;
struct gpio_desc *mosi;
struct gpio_desc **cs_gpios;
- bool has_cs;
};
/*----------------------------------------------------------------------*/
@@ -95,12 +92,6 @@ spi_to_spi_gpio(const struct spi_device *spi)
return spi_gpio;
}
-static inline struct spi_gpio_platform_data *__pure
-spi_to_pdata(const struct spi_device *spi)
-{
- return &spi_to_spi_gpio(spi)->pdata;
-}
-
/* These helpers are in turn called by the bitbang inlines */
static inline void setsck(const struct spi_device *spi, int is_on)
{
@@ -223,7 +214,7 @@ static void spi_gpio_chipselect(struct spi_device *spi, int is_active)
gpiod_set_value_cansleep(spi_gpio->sck, spi->mode & SPI_CPOL);
/* Drive chip select line, if we have one */
- if (spi_gpio->has_cs) {
+ if (spi_gpio->cs_gpios) {
struct gpio_desc *cs = spi_gpio->cs_gpios[spi->chip_select];
/* SPI chip selects are normally active-low */
@@ -241,10 +232,12 @@ static int spi_gpio_setup(struct spi_device *spi)
* The CS GPIOs have already been
* initialized from the descriptor lookup.
*/
- cs = spi_gpio->cs_gpios[spi->chip_select];
- if (!spi->controller_state && cs)
- status = gpiod_direction_output(cs,
- !(spi->mode & SPI_CS_HIGH));
+ if (spi_gpio->cs_gpios) {
+ cs = spi_gpio->cs_gpios[spi->chip_select];
+ if (!spi->controller_state && cs)
+ status = gpiod_direction_output(cs,
+ !(spi->mode & SPI_CS_HIGH));
+ }
if (!status)
status = spi_bitbang_setup(spi);
@@ -295,40 +288,20 @@ static void spi_gpio_cleanup(struct spi_device *spi)
* floating signals. (A weak pulldown would save power too, but many
* drivers expect to see all-ones data as the no slave "response".)
*/
-static int spi_gpio_request(struct device *dev,
- struct spi_gpio *spi_gpio,
- unsigned int num_chipselects,
- u16 *mflags)
+static int spi_gpio_request(struct device *dev, struct spi_gpio *spi_gpio)
{
- int i;
-
spi_gpio->mosi = devm_gpiod_get_optional(dev, "mosi", GPIOD_OUT_LOW);
if (IS_ERR(spi_gpio->mosi))
return PTR_ERR(spi_gpio->mosi);
- if (!spi_gpio->mosi)
- /* HW configuration without MOSI pin */
- *mflags |= SPI_MASTER_NO_TX;
spi_gpio->miso = devm_gpiod_get_optional(dev, "miso", GPIOD_IN);
if (IS_ERR(spi_gpio->miso))
return PTR_ERR(spi_gpio->miso);
- /*
- * No setting SPI_MASTER_NO_RX here - if there is only a MOSI
- * pin connected the host can still do RX by changing the
- * direction of the line.
- */
spi_gpio->sck = devm_gpiod_get(dev, "sck", GPIOD_OUT_LOW);
if (IS_ERR(spi_gpio->sck))
return PTR_ERR(spi_gpio->sck);
- for (i = 0; i < num_chipselects; i++) {
- spi_gpio->cs_gpios[i] = devm_gpiod_get_index(dev, "cs",
- i, GPIOD_OUT_HIGH);
- if (IS_ERR(spi_gpio->cs_gpios[i]))
- return PTR_ERR(spi_gpio->cs_gpios[i]);
- }
-
return 0;
}
@@ -339,142 +312,134 @@ static const struct of_device_id spi_gpio_dt_ids[] = {
};
MODULE_DEVICE_TABLE(of, spi_gpio_dt_ids);
-static int spi_gpio_probe_dt(struct platform_device *pdev)
+static int spi_gpio_probe_dt(struct platform_device *pdev,
+ struct spi_master *master)
{
- int ret;
- u32 tmp;
- struct spi_gpio_platform_data *pdata;
- struct device_node *np = pdev->dev.of_node;
- const struct of_device_id *of_id =
- of_match_device(spi_gpio_dt_ids, &pdev->dev);
-
- if (!of_id)
- return 0;
+ master->dev.of_node = pdev->dev.of_node;
+ master->use_gpio_descriptors = true;
- pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- return -ENOMEM;
+ return 0;
+}
+#else
+static inline int spi_gpio_probe_dt(struct platform_device *pdev,
+ struct spi_master *master)
+{
+ return 0;
+}
+#endif
+static int spi_gpio_probe_pdata(struct platform_device *pdev,
+ struct spi_master *master)
+{
+ struct device *dev = &pdev->dev;
+ struct spi_gpio_platform_data *pdata = dev_get_platdata(dev);
+ struct spi_gpio *spi_gpio = spi_master_get_devdata(master);
+ int i;
- ret = of_property_read_u32(np, "num-chipselects", &tmp);
- if (ret < 0) {
- dev_err(&pdev->dev, "num-chipselects property not found\n");
- goto error_free;
- }
+#ifdef GENERIC_BITBANG
+ if (!pdata || !pdata->num_chipselect)
+ return -ENODEV;
+#endif
+ /*
+ * The master needs to think there is a chipselect even if not
+ * connected
+ */
+ master->num_chipselect = pdata->num_chipselect ?: 1;
- pdata->num_chipselect = tmp;
- pdev->dev.platform_data = pdata;
+ spi_gpio->cs_gpios = devm_kcalloc(dev, master->num_chipselect,
+ sizeof(*spi_gpio->cs_gpios),
+ GFP_KERNEL);
+ if (!spi_gpio->cs_gpios)
+ return -ENOMEM;
- return 1;
+ for (i = 0; i < master->num_chipselect; i++) {
+ spi_gpio->cs_gpios[i] = devm_gpiod_get_index(dev, "cs", i,
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(spi_gpio->cs_gpios[i]))
+ return PTR_ERR(spi_gpio->cs_gpios[i]);
+ }
-error_free:
- devm_kfree(&pdev->dev, pdata);
- return ret;
+ return 0;
}
-#else
-static inline int spi_gpio_probe_dt(struct platform_device *pdev)
+
+static void spi_gpio_put(void *data)
{
- return 0;
+ spi_master_put(data);
}
-#endif
static int spi_gpio_probe(struct platform_device *pdev)
{
int status;
struct spi_master *master;
struct spi_gpio *spi_gpio;
- struct spi_gpio_platform_data *pdata;
- u16 master_flags = 0;
- bool use_of = 0;
+ struct device *dev = &pdev->dev;
+ struct spi_bitbang *bb;
+ const struct of_device_id *of_id;
- status = spi_gpio_probe_dt(pdev);
- if (status < 0)
- return status;
- if (status > 0)
- use_of = 1;
-
- pdata = dev_get_platdata(&pdev->dev);
-#ifdef GENERIC_BITBANG
- if (!pdata || (!use_of && !pdata->num_chipselect))
- return -ENODEV;
-#endif
+ of_id = of_match_device(spi_gpio_dt_ids, &pdev->dev);
- master = spi_alloc_master(&pdev->dev, sizeof(*spi_gpio));
+ master = spi_alloc_master(dev, sizeof(*spi_gpio));
if (!master)
return -ENOMEM;
- spi_gpio = spi_master_get_devdata(master);
-
- spi_gpio->cs_gpios = devm_kcalloc(&pdev->dev,
- pdata->num_chipselect,
- sizeof(*spi_gpio->cs_gpios),
- GFP_KERNEL);
- if (!spi_gpio->cs_gpios)
- return -ENOMEM;
+ status = devm_add_action_or_reset(&pdev->dev, spi_gpio_put, master);
+ if (status)
+ return status;
- platform_set_drvdata(pdev, spi_gpio);
+ if (of_id)
+ status = spi_gpio_probe_dt(pdev, master);
+ else
+ status = spi_gpio_probe_pdata(pdev, master);
- /* Determine if we have chip selects connected */
- spi_gpio->has_cs = !!pdata->num_chipselect;
+ if (status)
+ return status;
- spi_gpio->pdev = pdev;
- if (pdata)
- spi_gpio->pdata = *pdata;
+ spi_gpio = spi_master_get_devdata(master);
- status = spi_gpio_request(&pdev->dev, spi_gpio,
- pdata->num_chipselect, &master_flags);
+ status = spi_gpio_request(dev, spi_gpio);
if (status)
return status;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
master->mode_bits = SPI_3WIRE | SPI_3WIRE_HIZ | SPI_CPHA | SPI_CPOL |
SPI_CS_HIGH;
- master->flags = master_flags;
+ if (!spi_gpio->mosi) {
+ /* HW configuration without MOSI pin
+ *
+ * No setting SPI_MASTER_NO_RX here - if there is only
+ * a MOSI pin connected the host can still do RX by
+ * changing the direction of the line.
+ */
+ master->flags = SPI_MASTER_NO_TX;
+ }
+
master->bus_num = pdev->id;
- /* The master needs to think there is a chipselect even if not connected */
- master->num_chipselect = spi_gpio->has_cs ? pdata->num_chipselect : 1;
master->setup = spi_gpio_setup;
master->cleanup = spi_gpio_cleanup;
-#ifdef CONFIG_OF
- master->dev.of_node = pdev->dev.of_node;
-#endif
- spi_gpio->bitbang.master = master;
- spi_gpio->bitbang.chipselect = spi_gpio_chipselect;
- spi_gpio->bitbang.set_line_direction = spi_gpio_set_direction;
+ bb = &spi_gpio->bitbang;
+ bb->master = master;
+ bb->chipselect = spi_gpio_chipselect;
+ bb->set_line_direction = spi_gpio_set_direction;
- if ((master_flags & SPI_MASTER_NO_TX) == 0) {
- spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0;
- spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1;
- spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2;
- spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_word_mode3;
+ if (master->flags & SPI_MASTER_NO_TX) {
+ bb->txrx_word[SPI_MODE_0] = spi_gpio_spec_txrx_word_mode0;
+ bb->txrx_word[SPI_MODE_1] = spi_gpio_spec_txrx_word_mode1;
+ bb->txrx_word[SPI_MODE_2] = spi_gpio_spec_txrx_word_mode2;
+ bb->txrx_word[SPI_MODE_3] = spi_gpio_spec_txrx_word_mode3;
} else {
- spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_spec_txrx_word_mode0;
- spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_spec_txrx_word_mode1;
- spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_spec_txrx_word_mode2;
- spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_spec_txrx_word_mode3;
+ bb->txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0;
+ bb->txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1;
+ bb->txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2;
+ bb->txrx_word[SPI_MODE_3] = spi_gpio_txrx_word_mode3;
}
- spi_gpio->bitbang.setup_transfer = spi_bitbang_setup_transfer;
+ bb->setup_transfer = spi_bitbang_setup_transfer;
- status = spi_bitbang_start(&spi_gpio->bitbang);
+ status = spi_bitbang_init(&spi_gpio->bitbang);
if (status)
- spi_master_put(master);
-
- return status;
-}
-
-static int spi_gpio_remove(struct platform_device *pdev)
-{
- struct spi_gpio *spi_gpio;
-
- spi_gpio = platform_get_drvdata(pdev);
-
- /* stop() unregisters child devices too */
- spi_bitbang_stop(&spi_gpio->bitbang);
-
- spi_master_put(spi_gpio->bitbang.master);
+ return status;
- return 0;
+ return devm_spi_register_master(&pdev->dev, spi_master_get(master));
}
MODULE_ALIAS("platform:" DRIVER_NAME);
@@ -485,7 +450,6 @@ static struct platform_driver spi_gpio_driver = {
.of_match_table = of_match_ptr(spi_gpio_dt_ids),
},
.probe = spi_gpio_probe,
- .remove = spi_gpio_remove,
};
module_platform_driver(spi_gpio_driver);
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index a81ae29aa68a..09c9a1edb2c6 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -28,6 +28,10 @@
#define DRIVER_NAME "spi_imx"
+static bool use_dma = true;
+module_param(use_dma, bool, 0644);
+MODULE_PARM_DESC(use_dma, "Enable usage of DMA when available (default)");
+
#define MXC_CSPIRXDATA 0x00
#define MXC_CSPITXDATA 0x04
#define MXC_CSPICTRL 0x08
@@ -219,6 +223,9 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
{
struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
+ if (!use_dma)
+ return false;
+
if (!master->dma_rx)
return false;
diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index a4d8d19ecff9..9f0fa9f3116d 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -135,8 +135,8 @@ static int spi_check_buswidth_req(struct spi_mem *mem, u8 buswidth, bool tx)
return -ENOTSUPP;
}
-static bool spi_mem_default_supports_op(struct spi_mem *mem,
- const struct spi_mem_op *op)
+bool spi_mem_default_supports_op(struct spi_mem *mem,
+ const struct spi_mem_op *op)
{
if (spi_check_buswidth_req(mem, op->cmd.buswidth, true))
return false;
@@ -622,7 +622,7 @@ void devm_spi_mem_dirmap_destroy(struct device *dev,
EXPORT_SYMBOL_GPL(devm_spi_mem_dirmap_destroy);
/**
- * spi_mem_dirmap_dirmap_read() - Read data through a direct mapping
+ * spi_mem_dirmap_read() - Read data through a direct mapping
* @desc: direct mapping descriptor
* @offs: offset to start reading from. Note that this is not an absolute
* offset, but the offset within the direct mapping which already has
@@ -668,7 +668,7 @@ ssize_t spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc,
EXPORT_SYMBOL_GPL(spi_mem_dirmap_read);
/**
- * spi_mem_dirmap_dirmap_write() - Write data through a direct mapping
+ * spi_mem_dirmap_write() - Write data through a direct mapping
* @desc: direct mapping descriptor
* @offs: offset to start writing from. Note that this is not an absolute
* offset, but the offset within the direct mapping which already has
diff --git a/drivers/staging/mt7621-spi/spi-mt7621.c b/drivers/spi/spi-mt7621.c
index b509f9fe3346..ae836114ee3d 100644
--- a/drivers/staging/mt7621-spi/spi-mt7621.c
+++ b/drivers/spi/spi-mt7621.c
@@ -1,15 +1,14 @@
// SPDX-License-Identifier: GPL-2.0
-/*
- * spi-mt7621.c -- MediaTek MT7621 SPI controller driver
- *
- * Copyright (C) 2011 Sergiy <piratfm@gmail.com>
- * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2014-2015 Felix Fietkau <nbd@nbd.name>
- *
- * Some parts are based on spi-orion.c:
- * Author: Shadi Ammouri <shadi@marvell.com>
- * Copyright (C) 2007-2008 Marvell Ltd.
- */
+//
+// spi-mt7621.c -- MediaTek MT7621 SPI controller driver
+//
+// Copyright (C) 2011 Sergiy <piratfm@gmail.com>
+// Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
+// Copyright (C) 2014-2015 Felix Fietkau <nbd@nbd.name>
+//
+// Some parts are based on spi-orion.c:
+// Author: Shadi Ammouri <shadi@marvell.com>
+// Copyright (C) 2007-2008 Marvell Ltd.
#include <linux/clk.h>
#include <linux/delay.h>
@@ -52,7 +51,7 @@
#define MT7621_LSB_FIRST BIT(3)
struct mt7621_spi {
- struct spi_master *master;
+ struct spi_controller *master;
void __iomem *base;
unsigned int sys_freq;
unsigned int speed;
@@ -64,7 +63,7 @@ struct mt7621_spi {
static inline struct mt7621_spi *spidev_to_mt7621_spi(struct spi_device *spi)
{
- return spi_master_get_devdata(spi->master);
+ return spi_controller_get_devdata(spi->master);
}
static inline u32 mt7621_spi_read(struct mt7621_spi *rs, u32 reg)
@@ -77,29 +76,25 @@ static inline void mt7621_spi_write(struct mt7621_spi *rs, u32 reg, u32 val)
iowrite32(val, rs->base + reg);
}
-static void mt7621_spi_reset(struct mt7621_spi *rs)
+static void mt7621_spi_set_cs(struct spi_device *spi, int enable)
{
- u32 master = mt7621_spi_read(rs, MT7621_SPI_MASTER);
+ struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
+ int cs = spi->chip_select;
+ u32 polar = 0;
+ u32 master;
/*
* Select SPI device 7, enable "more buffer mode" and disable
* full-duplex (only half-duplex really works on this chip
* reliably)
*/
+ master = mt7621_spi_read(rs, MT7621_SPI_MASTER);
master |= MASTER_RS_SLAVE_SEL | MASTER_MORE_BUFMODE;
master &= ~MASTER_FULL_DUPLEX;
-
mt7621_spi_write(rs, MT7621_SPI_MASTER, master);
- rs->pending_write = 0;
-}
-static void mt7621_spi_set_cs(struct spi_device *spi, int enable)
-{
- struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
- int cs = spi->chip_select;
- u32 polar = 0;
+ rs->pending_write = 0;
- mt7621_spi_reset(rs);
if (enable)
polar = BIT(cs);
mt7621_spi_write(rs, MT7621_SPI_POLAR, polar);
@@ -163,13 +158,14 @@ static inline int mt7621_spi_wait_till_ready(struct mt7621_spi *rs)
static void mt7621_spi_read_half_duplex(struct mt7621_spi *rs,
int rx_len, u8 *buf)
{
+ int tx_len;
+
/*
* Combine with any pending write, and perform one or more half-duplex
* transactions reading 'len' bytes. Data to be written is already in
* MT7621_SPI_DATA.
*/
- int tx_len = rs->pending_write;
-
+ tx_len = rs->pending_write;
rs->pending_write = 0;
while (rx_len || tx_len) {
@@ -209,8 +205,8 @@ static inline void mt7621_spi_flush(struct mt7621_spi *rs)
static void mt7621_spi_write_half_duplex(struct mt7621_spi *rs,
int tx_len, const u8 *buf)
{
- int val = 0;
int len = rs->pending_write;
+ int val = 0;
if (len & 3) {
val = mt7621_spi_read(rs, MT7621_SPI_OPCODE + (len & ~3));
@@ -238,6 +234,7 @@ static void mt7621_spi_write_half_duplex(struct mt7621_spi *rs,
}
tx_len -= 1;
}
+
if (len & 3) {
if (len < 4) {
val = swab32(val);
@@ -245,13 +242,14 @@ static void mt7621_spi_write_half_duplex(struct mt7621_spi *rs,
}
mt7621_spi_write(rs, MT7621_SPI_OPCODE + (len & ~3), val);
}
+
rs->pending_write = len;
}
-static int mt7621_spi_transfer_one_message(struct spi_master *master,
+static int mt7621_spi_transfer_one_message(struct spi_controller *master,
struct spi_message *m)
{
- struct mt7621_spi *rs = spi_master_get_devdata(master);
+ struct mt7621_spi *rs = spi_controller_get_devdata(master);
struct spi_device *spi = m->spi;
unsigned int speed = spi->max_speed_hz;
struct spi_transfer *t = NULL;
@@ -268,11 +266,14 @@ static int mt7621_spi_transfer_one_message(struct spi_master *master,
goto msg_done;
}
+ /* Assert CS */
mt7621_spi_set_cs(spi, 1);
+
m->actual_length = 0;
list_for_each_entry(t, &m->transfers, transfer_list) {
if ((t->rx_buf) && (t->tx_buf)) {
- /* This controller will shift some extra data out
+ /*
+ * This controller will shift some extra data out
* of spi_opcode if (mosi_bit_cnt > 0) &&
* (cmd_bit_cnt == 0). So the claimed full-duplex
* support is broken since we have no way to read
@@ -287,8 +288,9 @@ static int mt7621_spi_transfer_one_message(struct spi_master *master,
}
m->actual_length += t->len;
}
- mt7621_spi_flush(rs);
+ /* Flush data and deassert CS */
+ mt7621_spi_flush(rs);
mt7621_spi_set_cs(spi, 0);
msg_done:
@@ -303,7 +305,7 @@ static int mt7621_spi_setup(struct spi_device *spi)
struct mt7621_spi *rs = spidev_to_mt7621_spi(spi);
if ((spi->max_speed_hz == 0) ||
- (spi->max_speed_hz > (rs->sys_freq / 2)))
+ (spi->max_speed_hz > (rs->sys_freq / 2)))
spi->max_speed_hz = (rs->sys_freq / 2);
if (spi->max_speed_hz < (rs->sys_freq / 4097)) {
@@ -324,7 +326,7 @@ MODULE_DEVICE_TABLE(of, mt7621_spi_match);
static int mt7621_spi_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
- struct spi_master *master;
+ struct spi_controller *master;
struct mt7621_spi *rs;
void __iomem *base;
struct resource *r;
@@ -361,7 +363,7 @@ static int mt7621_spi_probe(struct platform_device *pdev)
}
master->mode_bits = SPI_LSB_FIRST;
-
+ master->flags = SPI_CONTROLLER_HALF_DUPLEX;
master->setup = mt7621_spi_setup;
master->transfer_one_message = mt7621_spi_transfer_one_message;
master->bits_per_word_mask = SPI_BPW_MASK(8);
@@ -370,7 +372,7 @@ static int mt7621_spi_probe(struct platform_device *pdev)
dev_set_drvdata(&pdev->dev, master);
- rs = spi_master_get_devdata(master);
+ rs = spi_controller_get_devdata(master);
rs->base = base;
rs->clk = clk;
rs->master = master;
@@ -385,21 +387,18 @@ static int mt7621_spi_probe(struct platform_device *pdev)
return ret;
}
- mt7621_spi_reset(rs);
-
- return spi_register_master(master);
+ return devm_spi_register_controller(&pdev->dev, master);
}
static int mt7621_spi_remove(struct platform_device *pdev)
{
- struct spi_master *master;
+ struct spi_controller *master;
struct mt7621_spi *rs;
master = dev_get_drvdata(&pdev->dev);
- rs = spi_master_get_devdata(master);
+ rs = spi_controller_get_devdata(master);
- clk_disable(rs->clk);
- spi_unregister_master(master);
+ clk_disable_unprepare(rs->clk);
return 0;
}
diff --git a/drivers/spi/spi-mxic.c b/drivers/spi/spi-mxic.c
index e41ae6ef0f8a..f48563c09b97 100644
--- a/drivers/spi/spi-mxic.c
+++ b/drivers/spi/spi-mxic.c
@@ -492,8 +492,7 @@ static int mxic_spi_transfer_one(struct spi_master *master,
static int __maybe_unused mxic_spi_runtime_suspend(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct spi_master *master = platform_get_drvdata(pdev);
+ struct spi_master *master = dev_get_drvdata(dev);
struct mxic_spi *mxic = spi_master_get_devdata(master);
mxic_spi_clk_disable(mxic);
@@ -504,8 +503,7 @@ static int __maybe_unused mxic_spi_runtime_suspend(struct device *dev)
static int __maybe_unused mxic_spi_runtime_resume(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct spi_master *master = platform_get_drvdata(pdev);
+ struct spi_master *master = dev_get_drvdata(dev);
struct mxic_spi *mxic = spi_master_get_devdata(master);
int ret;
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index 7f280567093e..25ea4a9e0dbc 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -470,6 +470,8 @@ orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
if (orion_spi_write_read_8bit(spi, &tx, &rx) < 0)
goto out;
count--;
+ if (xfer->word_delay_usecs)
+ udelay(xfer->word_delay_usecs);
} while (count);
} else if (word_len == 16) {
const u16 *tx = xfer->tx_buf;
@@ -479,6 +481,8 @@ orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
if (orion_spi_write_read_16bit(spi, &tx, &rx) < 0)
goto out;
count -= 2;
+ if (xfer->word_delay_usecs)
+ udelay(xfer->word_delay_usecs);
} while (count);
}
diff --git a/drivers/spi/spi-pxa2xx-dma.c b/drivers/spi/spi-pxa2xx-dma.c
index 15592598273e..e5c26c1779ab 100644
--- a/drivers/spi/spi-pxa2xx-dma.c
+++ b/drivers/spi/spi-pxa2xx-dma.c
@@ -239,13 +239,15 @@ int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip,
u32 *threshold)
{
struct pxa2xx_spi_chip *chip_info = spi->controller_data;
+ struct driver_data *drv_data = spi_controller_get_devdata(spi->controller);
+ u32 dma_burst_size = drv_data->controller_info->dma_burst_size;
/*
* If the DMA burst size is given in chip_info we use that,
* otherwise we use the default. Also we use the default FIFO
* thresholds for now.
*/
- *burst_code = chip_info ? chip_info->dma_burst_size : 1;
+ *burst_code = chip_info ? chip_info->dma_burst_size : dma_burst_size;
*threshold = SSCR1_RxTresh(RX_THRESH_DFLT)
| SSCR1_TxTresh(TX_THRESH_DFLT);
diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c
index 1727fdfbac28..d456c5251b5d 100644
--- a/drivers/spi/spi-pxa2xx-pci.c
+++ b/drivers/spi/spi-pxa2xx-pci.c
@@ -5,7 +5,6 @@
*/
#include <linux/clk-provider.h>
#include <linux/module.h>
-#include <linux/of_device.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/spi/pxa2xx_spi.h>
@@ -35,6 +34,8 @@ struct pxa_spi_info {
void *tx_param;
void *rx_param;
+ int dma_burst_size;
+
int (*setup)(struct pci_dev *pdev, struct pxa_spi_info *c);
};
@@ -133,6 +134,7 @@ static int mrfld_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
rx->dma_dev = &dma_dev->dev;
c->dma_filter = lpss_dma_filter;
+ c->dma_burst_size = 8;
return 0;
}
@@ -223,6 +225,7 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
spi_pdata.tx_param = c->tx_param;
spi_pdata.rx_param = c->rx_param;
spi_pdata.enable_dma = c->rx_param && c->tx_param;
+ spi_pdata.dma_burst_size = c->dma_burst_size ? c->dma_burst_size : 1;
ssp = &spi_pdata.ssp;
ssp->phys_base = pci_resource_start(dev, 0);
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index d2076f2f468f..e59c8b27b155 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -929,7 +929,7 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller,
{
struct driver_data *drv_data = spi_controller_get_devdata(controller);
struct spi_message *message = controller->cur_msg;
- struct chip_data *chip = spi_get_ctldata(message->spi);
+ struct chip_data *chip = spi_get_ctldata(spi);
u32 dma_thresh = chip->dma_threshold;
u32 dma_burst = chip->dma_burst_size;
u32 change_mask = pxa2xx_spi_get_ssrc1_change_mask(drv_data);
@@ -947,21 +947,21 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller,
/* reject already-mapped transfers; PIO won't always work */
if (message->is_dma_mapped
|| transfer->rx_dma || transfer->tx_dma) {
- dev_err(&drv_data->pdev->dev,
+ dev_err(&spi->dev,
"Mapped transfer length of %u is greater than %d\n",
transfer->len, MAX_DMA_LEN);
return -EINVAL;
}
/* warn ... we force this to PIO mode */
- dev_warn_ratelimited(&message->spi->dev,
+ dev_warn_ratelimited(&spi->dev,
"DMA disabled for transfer length %ld greater than %d\n",
(long)transfer->len, MAX_DMA_LEN);
}
/* Setup the transfer state based on the type of transfer */
if (pxa2xx_spi_flush(drv_data) == 0) {
- dev_err(&drv_data->pdev->dev, "Flush failed\n");
+ dev_err(&spi->dev, "Flush failed\n");
return -EIO;
}
drv_data->n_bytes = chip->n_bytes;
@@ -1003,15 +1003,15 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller,
*/
if (chip->enable_dma) {
if (pxa2xx_spi_set_dma_burst_and_threshold(chip,
- message->spi,
+ spi,
bits, &dma_burst,
&dma_thresh))
- dev_warn_ratelimited(&message->spi->dev,
+ dev_warn_ratelimited(&spi->dev,
"DMA burst size reduced to match bits_per_word\n");
}
dma_mapped = controller->can_dma &&
- controller->can_dma(controller, message->spi, transfer) &&
+ controller->can_dma(controller, spi, transfer) &&
controller->cur_msg_mapped;
if (dma_mapped) {
@@ -1039,12 +1039,12 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller,
/* NOTE: PXA25x_SSP _could_ use external clocking ... */
cr0 = pxa2xx_configure_sscr0(drv_data, clk_div, bits);
if (!pxa25x_ssp_comp(drv_data))
- dev_dbg(&message->spi->dev, "%u Hz actual, %s\n",
+ dev_dbg(&spi->dev, "%u Hz actual, %s\n",
controller->max_speed_hz
/ (1 + ((cr0 & SSCR0_SCR(0xfff)) >> 8)),
dma_mapped ? "DMA" : "PIO");
else
- dev_dbg(&message->spi->dev, "%u Hz actual, %s\n",
+ dev_dbg(&spi->dev, "%u Hz actual, %s\n",
controller->max_speed_hz / 2
/ (1 + ((cr0 & SSCR0_SCR(0x0ff)) >> 8)),
dma_mapped ? "DMA" : "PIO");
@@ -1337,6 +1337,9 @@ static int setup(struct spi_device *spi)
dev_warn(&spi->dev,
"in setup: DMA burst size reduced to match bits_per_word\n");
}
+ dev_dbg(&spi->dev,
+ "in setup: DMA burst size set to %u\n",
+ chip->dma_burst_size);
}
switch (drv_data->ssp_type) {
@@ -1455,6 +1458,10 @@ static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = {
{ PCI_VDEVICE(INTEL, 0xa32a), LPSS_CNL_SSP },
{ PCI_VDEVICE(INTEL, 0xa32b), LPSS_CNL_SSP },
{ PCI_VDEVICE(INTEL, 0xa37b), LPSS_CNL_SSP },
+ /* CML-LP */
+ { PCI_VDEVICE(INTEL, 0x02aa), LPSS_CNL_SSP },
+ { PCI_VDEVICE(INTEL, 0x02ab), LPSS_CNL_SSP },
+ { PCI_VDEVICE(INTEL, 0x02fb), LPSS_CNL_SSP },
{ },
};
@@ -1568,6 +1575,7 @@ pxa2xx_spi_init_pdata(struct platform_device *pdev)
pdata->is_slave = of_property_read_bool(pdev->dev.of_node, "spi-slave");
pdata->num_chipselect = 1;
pdata->enable_dma = true;
+ pdata->dma_burst_size = 1;
return pdata;
}
@@ -1696,7 +1704,7 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
if (platform_info->enable_dma) {
status = pxa2xx_spi_dma_setup(drv_data);
if (status) {
- dev_dbg(dev, "no DMA channels available, using PIO\n");
+ dev_warn(dev, "no DMA channels available, using PIO\n");
platform_info->enable_dma = false;
} else {
controller->can_dma = pxa2xx_spi_can_dma;
@@ -1957,3 +1965,5 @@ static void __exit pxa2xx_spi_exit(void)
platform_driver_unregister(&driver);
}
module_exit(pxa2xx_spi_exit);
+
+MODULE_SOFTDEP("pre: dw_dmac");
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index e2eb466db10a..6aab7b2136db 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -18,6 +18,7 @@
#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -82,111 +83,113 @@ struct sh_msiof_spi_priv {
#define RFDR 0x60 /* Receive FIFO Data Register */
/* TMDR1 and RMDR1 */
-#define MDR1_TRMD 0x80000000 /* Transfer Mode (1 = Master mode) */
-#define MDR1_SYNCMD_MASK 0x30000000 /* SYNC Mode */
-#define MDR1_SYNCMD_SPI 0x20000000 /* Level mode/SPI */
-#define MDR1_SYNCMD_LR 0x30000000 /* L/R mode */
-#define MDR1_SYNCAC_SHIFT 25 /* Sync Polarity (1 = Active-low) */
-#define MDR1_BITLSB_SHIFT 24 /* MSB/LSB First (1 = LSB first) */
-#define MDR1_DTDL_SHIFT 20 /* Data Pin Bit Delay for MSIOF_SYNC */
-#define MDR1_SYNCDL_SHIFT 16 /* Frame Sync Signal Timing Delay */
-#define MDR1_FLD_MASK 0x0000000c /* Frame Sync Signal Interval (0-3) */
-#define MDR1_FLD_SHIFT 2
-#define MDR1_XXSTP 0x00000001 /* Transmission/Reception Stop on FIFO */
+#define MDR1_TRMD BIT(31) /* Transfer Mode (1 = Master mode) */
+#define MDR1_SYNCMD_MASK GENMASK(29, 28) /* SYNC Mode */
+#define MDR1_SYNCMD_SPI (2 << 28)/* Level mode/SPI */
+#define MDR1_SYNCMD_LR (3 << 28)/* L/R mode */
+#define MDR1_SYNCAC_SHIFT 25 /* Sync Polarity (1 = Active-low) */
+#define MDR1_BITLSB_SHIFT 24 /* MSB/LSB First (1 = LSB first) */
+#define MDR1_DTDL_SHIFT 20 /* Data Pin Bit Delay for MSIOF_SYNC */
+#define MDR1_SYNCDL_SHIFT 16 /* Frame Sync Signal Timing Delay */
+#define MDR1_FLD_MASK GENMASK(3, 2) /* Frame Sync Signal Interval (0-3) */
+#define MDR1_FLD_SHIFT 2
+#define MDR1_XXSTP BIT(0) /* Transmission/Reception Stop on FIFO */
/* TMDR1 */
-#define TMDR1_PCON 0x40000000 /* Transfer Signal Connection */
-#define TMDR1_SYNCCH_MASK 0xc000000 /* Synchronization Signal Channel Select */
-#define TMDR1_SYNCCH_SHIFT 26 /* 0=MSIOF_SYNC, 1=MSIOF_SS1, 2=MSIOF_SS2 */
+#define TMDR1_PCON BIT(30) /* Transfer Signal Connection */
+#define TMDR1_SYNCCH_MASK GENMASK(27, 26) /* Sync Signal Channel Select */
+#define TMDR1_SYNCCH_SHIFT 26 /* 0=MSIOF_SYNC, 1=MSIOF_SS1, 2=MSIOF_SS2 */
/* TMDR2 and RMDR2 */
#define MDR2_BITLEN1(i) (((i) - 1) << 24) /* Data Size (8-32 bits) */
#define MDR2_WDLEN1(i) (((i) - 1) << 16) /* Word Count (1-64/256 (SH, A1))) */
-#define MDR2_GRPMASK1 0x00000001 /* Group Output Mask 1 (SH, A1) */
+#define MDR2_GRPMASK1 BIT(0) /* Group Output Mask 1 (SH, A1) */
/* TSCR and RSCR */
-#define SCR_BRPS_MASK 0x1f00 /* Prescaler Setting (1-32) */
+#define SCR_BRPS_MASK GENMASK(12, 8) /* Prescaler Setting (1-32) */
#define SCR_BRPS(i) (((i) - 1) << 8)
-#define SCR_BRDV_MASK 0x0007 /* Baud Rate Generator's Division Ratio */
-#define SCR_BRDV_DIV_2 0x0000
-#define SCR_BRDV_DIV_4 0x0001
-#define SCR_BRDV_DIV_8 0x0002
-#define SCR_BRDV_DIV_16 0x0003
-#define SCR_BRDV_DIV_32 0x0004
-#define SCR_BRDV_DIV_1 0x0007
+#define SCR_BRDV_MASK GENMASK(2, 0) /* Baud Rate Generator's Division Ratio */
+#define SCR_BRDV_DIV_2 0
+#define SCR_BRDV_DIV_4 1
+#define SCR_BRDV_DIV_8 2
+#define SCR_BRDV_DIV_16 3
+#define SCR_BRDV_DIV_32 4
+#define SCR_BRDV_DIV_1 7
/* CTR */
-#define CTR_TSCKIZ_MASK 0xc0000000 /* Transmit Clock I/O Polarity Select */
-#define CTR_TSCKIZ_SCK 0x80000000 /* Disable SCK when TX disabled */
-#define CTR_TSCKIZ_POL_SHIFT 30 /* Transmit Clock Polarity */
-#define CTR_RSCKIZ_MASK 0x30000000 /* Receive Clock Polarity Select */
-#define CTR_RSCKIZ_SCK 0x20000000 /* Must match CTR_TSCKIZ_SCK */
-#define CTR_RSCKIZ_POL_SHIFT 28 /* Receive Clock Polarity */
-#define CTR_TEDG_SHIFT 27 /* Transmit Timing (1 = falling edge) */
-#define CTR_REDG_SHIFT 26 /* Receive Timing (1 = falling edge) */
-#define CTR_TXDIZ_MASK 0x00c00000 /* Pin Output When TX is Disabled */
-#define CTR_TXDIZ_LOW 0x00000000 /* 0 */
-#define CTR_TXDIZ_HIGH 0x00400000 /* 1 */
-#define CTR_TXDIZ_HIZ 0x00800000 /* High-impedance */
-#define CTR_TSCKE 0x00008000 /* Transmit Serial Clock Output Enable */
-#define CTR_TFSE 0x00004000 /* Transmit Frame Sync Signal Output Enable */
-#define CTR_TXE 0x00000200 /* Transmit Enable */
-#define CTR_RXE 0x00000100 /* Receive Enable */
+#define CTR_TSCKIZ_MASK GENMASK(31, 30) /* Transmit Clock I/O Polarity Select */
+#define CTR_TSCKIZ_SCK BIT(31) /* Disable SCK when TX disabled */
+#define CTR_TSCKIZ_POL_SHIFT 30 /* Transmit Clock Polarity */
+#define CTR_RSCKIZ_MASK GENMASK(29, 28) /* Receive Clock Polarity Select */
+#define CTR_RSCKIZ_SCK BIT(29) /* Must match CTR_TSCKIZ_SCK */
+#define CTR_RSCKIZ_POL_SHIFT 28 /* Receive Clock Polarity */
+#define CTR_TEDG_SHIFT 27 /* Transmit Timing (1 = falling edge) */
+#define CTR_REDG_SHIFT 26 /* Receive Timing (1 = falling edge) */
+#define CTR_TXDIZ_MASK GENMASK(23, 22) /* Pin Output When TX is Disabled */
+#define CTR_TXDIZ_LOW (0 << 22) /* 0 */
+#define CTR_TXDIZ_HIGH (1 << 22) /* 1 */
+#define CTR_TXDIZ_HIZ (2 << 22) /* High-impedance */
+#define CTR_TSCKE BIT(15) /* Transmit Serial Clock Output Enable */
+#define CTR_TFSE BIT(14) /* Transmit Frame Sync Signal Output Enable */
+#define CTR_TXE BIT(9) /* Transmit Enable */
+#define CTR_RXE BIT(8) /* Receive Enable */
+#define CTR_TXRST BIT(1) /* Transmit Reset */
+#define CTR_RXRST BIT(0) /* Receive Reset */
/* FCTR */
-#define FCTR_TFWM_MASK 0xe0000000 /* Transmit FIFO Watermark */
-#define FCTR_TFWM_64 0x00000000 /* Transfer Request when 64 empty stages */
-#define FCTR_TFWM_32 0x20000000 /* Transfer Request when 32 empty stages */
-#define FCTR_TFWM_24 0x40000000 /* Transfer Request when 24 empty stages */
-#define FCTR_TFWM_16 0x60000000 /* Transfer Request when 16 empty stages */
-#define FCTR_TFWM_12 0x80000000 /* Transfer Request when 12 empty stages */
-#define FCTR_TFWM_8 0xa0000000 /* Transfer Request when 8 empty stages */
-#define FCTR_TFWM_4 0xc0000000 /* Transfer Request when 4 empty stages */
-#define FCTR_TFWM_1 0xe0000000 /* Transfer Request when 1 empty stage */
-#define FCTR_TFUA_MASK 0x07f00000 /* Transmit FIFO Usable Area */
-#define FCTR_TFUA_SHIFT 20
+#define FCTR_TFWM_MASK GENMASK(31, 29) /* Transmit FIFO Watermark */
+#define FCTR_TFWM_64 (0 << 29) /* Transfer Request when 64 empty stages */
+#define FCTR_TFWM_32 (1 << 29) /* Transfer Request when 32 empty stages */
+#define FCTR_TFWM_24 (2 << 29) /* Transfer Request when 24 empty stages */
+#define FCTR_TFWM_16 (3 << 29) /* Transfer Request when 16 empty stages */
+#define FCTR_TFWM_12 (4 << 29) /* Transfer Request when 12 empty stages */
+#define FCTR_TFWM_8 (5 << 29) /* Transfer Request when 8 empty stages */
+#define FCTR_TFWM_4 (6 << 29) /* Transfer Request when 4 empty stages */
+#define FCTR_TFWM_1 (7 << 29) /* Transfer Request when 1 empty stage */
+#define FCTR_TFUA_MASK GENMASK(26, 20) /* Transmit FIFO Usable Area */
+#define FCTR_TFUA_SHIFT 20
#define FCTR_TFUA(i) ((i) << FCTR_TFUA_SHIFT)
-#define FCTR_RFWM_MASK 0x0000e000 /* Receive FIFO Watermark */
-#define FCTR_RFWM_1 0x00000000 /* Transfer Request when 1 valid stages */
-#define FCTR_RFWM_4 0x00002000 /* Transfer Request when 4 valid stages */
-#define FCTR_RFWM_8 0x00004000 /* Transfer Request when 8 valid stages */
-#define FCTR_RFWM_16 0x00006000 /* Transfer Request when 16 valid stages */
-#define FCTR_RFWM_32 0x00008000 /* Transfer Request when 32 valid stages */
-#define FCTR_RFWM_64 0x0000a000 /* Transfer Request when 64 valid stages */
-#define FCTR_RFWM_128 0x0000c000 /* Transfer Request when 128 valid stages */
-#define FCTR_RFWM_256 0x0000e000 /* Transfer Request when 256 valid stages */
-#define FCTR_RFUA_MASK 0x00001ff0 /* Receive FIFO Usable Area (0x40 = full) */
-#define FCTR_RFUA_SHIFT 4
+#define FCTR_RFWM_MASK GENMASK(15, 13) /* Receive FIFO Watermark */
+#define FCTR_RFWM_1 (0 << 13) /* Transfer Request when 1 valid stages */
+#define FCTR_RFWM_4 (1 << 13) /* Transfer Request when 4 valid stages */
+#define FCTR_RFWM_8 (2 << 13) /* Transfer Request when 8 valid stages */
+#define FCTR_RFWM_16 (3 << 13) /* Transfer Request when 16 valid stages */
+#define FCTR_RFWM_32 (4 << 13) /* Transfer Request when 32 valid stages */
+#define FCTR_RFWM_64 (5 << 13) /* Transfer Request when 64 valid stages */
+#define FCTR_RFWM_128 (6 << 13) /* Transfer Request when 128 valid stages */
+#define FCTR_RFWM_256 (7 << 13) /* Transfer Request when 256 valid stages */
+#define FCTR_RFUA_MASK GENMASK(12, 4) /* Receive FIFO Usable Area (0x40 = full) */
+#define FCTR_RFUA_SHIFT 4
#define FCTR_RFUA(i) ((i) << FCTR_RFUA_SHIFT)
/* STR */
-#define STR_TFEMP 0x20000000 /* Transmit FIFO Empty */
-#define STR_TDREQ 0x10000000 /* Transmit Data Transfer Request */
-#define STR_TEOF 0x00800000 /* Frame Transmission End */
-#define STR_TFSERR 0x00200000 /* Transmit Frame Synchronization Error */
-#define STR_TFOVF 0x00100000 /* Transmit FIFO Overflow */
-#define STR_TFUDF 0x00080000 /* Transmit FIFO Underflow */
-#define STR_RFFUL 0x00002000 /* Receive FIFO Full */
-#define STR_RDREQ 0x00001000 /* Receive Data Transfer Request */
-#define STR_REOF 0x00000080 /* Frame Reception End */
-#define STR_RFSERR 0x00000020 /* Receive Frame Synchronization Error */
-#define STR_RFUDF 0x00000010 /* Receive FIFO Underflow */
-#define STR_RFOVF 0x00000008 /* Receive FIFO Overflow */
+#define STR_TFEMP BIT(29) /* Transmit FIFO Empty */
+#define STR_TDREQ BIT(28) /* Transmit Data Transfer Request */
+#define STR_TEOF BIT(23) /* Frame Transmission End */
+#define STR_TFSERR BIT(21) /* Transmit Frame Synchronization Error */
+#define STR_TFOVF BIT(20) /* Transmit FIFO Overflow */
+#define STR_TFUDF BIT(19) /* Transmit FIFO Underflow */
+#define STR_RFFUL BIT(13) /* Receive FIFO Full */
+#define STR_RDREQ BIT(12) /* Receive Data Transfer Request */
+#define STR_REOF BIT(7) /* Frame Reception End */
+#define STR_RFSERR BIT(5) /* Receive Frame Synchronization Error */
+#define STR_RFUDF BIT(4) /* Receive FIFO Underflow */
+#define STR_RFOVF BIT(3) /* Receive FIFO Overflow */
/* IER */
-#define IER_TDMAE 0x80000000 /* Transmit Data DMA Transfer Req. Enable */
-#define IER_TFEMPE 0x20000000 /* Transmit FIFO Empty Enable */
-#define IER_TDREQE 0x10000000 /* Transmit Data Transfer Request Enable */
-#define IER_TEOFE 0x00800000 /* Frame Transmission End Enable */
-#define IER_TFSERRE 0x00200000 /* Transmit Frame Sync Error Enable */
-#define IER_TFOVFE 0x00100000 /* Transmit FIFO Overflow Enable */
-#define IER_TFUDFE 0x00080000 /* Transmit FIFO Underflow Enable */
-#define IER_RDMAE 0x00008000 /* Receive Data DMA Transfer Req. Enable */
-#define IER_RFFULE 0x00002000 /* Receive FIFO Full Enable */
-#define IER_RDREQE 0x00001000 /* Receive Data Transfer Request Enable */
-#define IER_REOFE 0x00000080 /* Frame Reception End Enable */
-#define IER_RFSERRE 0x00000020 /* Receive Frame Sync Error Enable */
-#define IER_RFUDFE 0x00000010 /* Receive FIFO Underflow Enable */
-#define IER_RFOVFE 0x00000008 /* Receive FIFO Overflow Enable */
+#define IER_TDMAE BIT(31) /* Transmit Data DMA Transfer Req. Enable */
+#define IER_TFEMPE BIT(29) /* Transmit FIFO Empty Enable */
+#define IER_TDREQE BIT(28) /* Transmit Data Transfer Request Enable */
+#define IER_TEOFE BIT(23) /* Frame Transmission End Enable */
+#define IER_TFSERRE BIT(21) /* Transmit Frame Sync Error Enable */
+#define IER_TFOVFE BIT(20) /* Transmit FIFO Overflow Enable */
+#define IER_TFUDFE BIT(19) /* Transmit FIFO Underflow Enable */
+#define IER_RDMAE BIT(15) /* Receive Data DMA Transfer Req. Enable */
+#define IER_RFFULE BIT(13) /* Receive FIFO Full Enable */
+#define IER_RDREQE BIT(12) /* Receive Data Transfer Request Enable */
+#define IER_REOFE BIT(7) /* Frame Reception End Enable */
+#define IER_RFSERRE BIT(5) /* Receive Frame Sync Error Enable */
+#define IER_RFUDFE BIT(4) /* Receive FIFO Underflow Enable */
+#define IER_RFOVFE BIT(3) /* Receive FIFO Overflow Enable */
static u32 sh_msiof_read(struct sh_msiof_spi_priv *p, int reg_offs)
@@ -219,21 +222,14 @@ static int sh_msiof_modify_ctr_wait(struct sh_msiof_spi_priv *p,
{
u32 mask = clr | set;
u32 data;
- int k;
data = sh_msiof_read(p, CTR);
data &= ~clr;
data |= set;
sh_msiof_write(p, CTR, data);
- for (k = 100; k > 0; k--) {
- if ((sh_msiof_read(p, CTR) & mask) == set)
- break;
-
- udelay(10);
- }
-
- return k > 0 ? 0 : -ETIMEDOUT;
+ return readl_poll_timeout_atomic(p->mapbase + CTR, data,
+ (data & mask) == set, 10, 1000);
}
static irqreturn_t sh_msiof_spi_irq(int irq, void *data)
@@ -247,6 +243,19 @@ static irqreturn_t sh_msiof_spi_irq(int irq, void *data)
return IRQ_HANDLED;
}
+static void sh_msiof_spi_reset_regs(struct sh_msiof_spi_priv *p)
+{
+ u32 mask = CTR_TXRST | CTR_RXRST;
+ u32 data;
+
+ data = sh_msiof_read(p, CTR);
+ data |= mask;
+ sh_msiof_write(p, CTR, data);
+
+ readl_poll_timeout_atomic(p->mapbase + CTR, data, !(data & mask), 1,
+ 100);
+}
+
static const u32 sh_msiof_spi_div_array[] = {
SCR_BRDV_DIV_1, SCR_BRDV_DIV_2, SCR_BRDV_DIV_4,
SCR_BRDV_DIV_8, SCR_BRDV_DIV_16, SCR_BRDV_DIV_32,
@@ -540,25 +549,11 @@ static void sh_msiof_spi_read_fifo_s32u(struct sh_msiof_spi_priv *p,
static int sh_msiof_spi_setup(struct spi_device *spi)
{
- struct device_node *np = spi->controller->dev.of_node;
struct sh_msiof_spi_priv *p =
spi_controller_get_devdata(spi->controller);
u32 clr, set, tmp;
- if (!np) {
- /*
- * Use spi->controller_data for CS (same strategy as spi_gpio),
- * if any. otherwise let HW control CS
- */
- spi->cs_gpio = (uintptr_t)spi->controller_data;
- }
-
- if (gpio_is_valid(spi->cs_gpio)) {
- gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH));
- return 0;
- }
-
- if (spi_controller_is_slave(p->ctlr))
+ if (spi->cs_gpiod || spi_controller_is_slave(p->ctlr))
return 0;
if (p->native_cs_inited &&
@@ -591,7 +586,7 @@ static int sh_msiof_prepare_message(struct spi_controller *ctlr,
u32 ss, cs_high;
/* Configure pins before asserting CS */
- if (gpio_is_valid(spi->cs_gpio)) {
+ if (spi->cs_gpiod) {
ss = p->unused_ss;
cs_high = p->native_cs_high;
} else {
@@ -926,6 +921,9 @@ static int sh_msiof_transfer_one(struct spi_controller *ctlr,
bool swab;
int ret;
+ /* reset registers */
+ sh_msiof_spi_reset_regs(p);
+
/* setup clocks (clock already enabled in chipselect()) */
if (!spi_controller_is_slave(p->ctlr))
sh_msiof_spi_set_clk_regs(p, clk_get_rate(p->clk), t->speed_hz);
@@ -1144,6 +1142,7 @@ static int sh_msiof_get_cs_gpios(struct sh_msiof_spi_priv *p)
gpiod = devm_gpiod_get_index(dev, "cs", i, GPIOD_ASIS);
if (!IS_ERR(gpiod)) {
+ devm_gpiod_put(dev, gpiod);
cs_gpios++;
continue;
}
@@ -1395,6 +1394,7 @@ static int sh_msiof_spi_probe(struct platform_device *pdev)
ctlr->bits_per_word_mask = chipdata->bits_per_word_mask;
ctlr->auto_runtime_pm = true;
ctlr->transfer_one = sh_msiof_transfer_one;
+ ctlr->use_gpio_descriptors = true;
ret = sh_msiof_request_dma(p);
if (ret < 0)
diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c
index 7354f9d68dba..42f8e3c6aa1f 100644
--- a/drivers/spi/spi-stm32-qspi.c
+++ b/drivers/spi/spi-stm32-qspi.c
@@ -5,6 +5,8 @@
*/
#include <linux/bitfield.h>
#include <linux/clk.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
#include <linux/errno.h>
#include <linux/io.h>
#include <linux/iopoll.h>
@@ -13,6 +15,7 @@
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
#include <linux/sizes.h>
@@ -83,6 +86,7 @@
#define STM32_FIFO_TIMEOUT_US 30000
#define STM32_BUSY_TIMEOUT_US 100000
#define STM32_ABT_TIMEOUT_US 100000
+#define STM32_COMP_TIMEOUT_MS 1000
struct stm32_qspi_flash {
struct stm32_qspi *qspi;
@@ -92,6 +96,8 @@ struct stm32_qspi_flash {
struct stm32_qspi {
struct device *dev;
+ struct spi_controller *ctrl;
+ phys_addr_t phys_base;
void __iomem *io_base;
void __iomem *mm_base;
resource_size_t mm_size;
@@ -101,6 +107,13 @@ struct stm32_qspi {
struct completion data_completion;
u32 fmode;
+ struct dma_chan *dma_chtx;
+ struct dma_chan *dma_chrx;
+ struct completion dma_completion;
+
+ u32 cr_reg;
+ u32 dcr_reg;
+
/*
* to protect device configuration, could be different between
* 2 flash access (bk1, bk2)
@@ -176,6 +189,81 @@ static int stm32_qspi_tx_mm(struct stm32_qspi *qspi,
return 0;
}
+static void stm32_qspi_dma_callback(void *arg)
+{
+ struct completion *dma_completion = arg;
+
+ complete(dma_completion);
+}
+
+static int stm32_qspi_tx_dma(struct stm32_qspi *qspi,
+ const struct spi_mem_op *op)
+{
+ struct dma_async_tx_descriptor *desc;
+ enum dma_transfer_direction dma_dir;
+ struct dma_chan *dma_ch;
+ struct sg_table sgt;
+ dma_cookie_t cookie;
+ u32 cr, t_out;
+ int err;
+
+ if (op->data.dir == SPI_MEM_DATA_IN) {
+ dma_dir = DMA_DEV_TO_MEM;
+ dma_ch = qspi->dma_chrx;
+ } else {
+ dma_dir = DMA_MEM_TO_DEV;
+ dma_ch = qspi->dma_chtx;
+ }
+
+ /*
+ * spi_map_buf return -EINVAL if the buffer is not DMA-able
+ * (DMA-able: in vmalloc | kmap | virt_addr_valid)
+ */
+ err = spi_controller_dma_map_mem_op_data(qspi->ctrl, op, &sgt);
+ if (err)
+ return err;
+
+ desc = dmaengine_prep_slave_sg(dma_ch, sgt.sgl, sgt.nents,
+ dma_dir, DMA_PREP_INTERRUPT);
+ if (!desc) {
+ err = -ENOMEM;
+ goto out_unmap;
+ }
+
+ cr = readl_relaxed(qspi->io_base + QSPI_CR);
+
+ reinit_completion(&qspi->dma_completion);
+ desc->callback = stm32_qspi_dma_callback;
+ desc->callback_param = &qspi->dma_completion;
+ cookie = dmaengine_submit(desc);
+ err = dma_submit_error(cookie);
+ if (err)
+ goto out;
+
+ dma_async_issue_pending(dma_ch);
+
+ writel_relaxed(cr | CR_DMAEN, qspi->io_base + QSPI_CR);
+
+ t_out = sgt.nents * STM32_COMP_TIMEOUT_MS;
+ if (!wait_for_completion_interruptible_timeout(&qspi->dma_completion,
+ msecs_to_jiffies(t_out)))
+ err = -ETIMEDOUT;
+
+ if (dma_async_is_tx_complete(dma_ch, cookie,
+ NULL, NULL) != DMA_COMPLETE)
+ err = -ETIMEDOUT;
+
+ if (err)
+ dmaengine_terminate_all(dma_ch);
+
+out:
+ writel_relaxed(cr & ~CR_DMAEN, qspi->io_base + QSPI_CR);
+out_unmap:
+ spi_controller_dma_unmap_mem_op_data(qspi->ctrl, op, &sgt);
+
+ return err;
+}
+
static int stm32_qspi_tx(struct stm32_qspi *qspi, const struct spi_mem_op *op)
{
if (!op->data.nbytes)
@@ -183,6 +271,10 @@ static int stm32_qspi_tx(struct stm32_qspi *qspi, const struct spi_mem_op *op)
if (qspi->fmode == CCR_FMODE_MM)
return stm32_qspi_tx_mm(qspi, op);
+ else if ((op->data.dir == SPI_MEM_DATA_IN && qspi->dma_chrx) ||
+ (op->data.dir == SPI_MEM_DATA_OUT && qspi->dma_chtx))
+ if (!stm32_qspi_tx_dma(qspi, op))
+ return 0;
return stm32_qspi_tx_poll(qspi, op);
}
@@ -213,7 +305,7 @@ static int stm32_qspi_wait_cmd(struct stm32_qspi *qspi,
writel_relaxed(cr | CR_TCIE | CR_TEIE, qspi->io_base + QSPI_CR);
if (!wait_for_completion_interruptible_timeout(&qspi->data_completion,
- msecs_to_jiffies(1000))) {
+ msecs_to_jiffies(STM32_COMP_TIMEOUT_MS))) {
err = -ETIMEDOUT;
} else {
sr = readl_relaxed(qspi->io_base + QSPI_SR);
@@ -355,7 +447,7 @@ static int stm32_qspi_setup(struct spi_device *spi)
struct spi_controller *ctrl = spi->master;
struct stm32_qspi *qspi = spi_controller_get_devdata(ctrl);
struct stm32_qspi_flash *flash;
- u32 cr, presc;
+ u32 presc;
if (ctrl->busy)
return -EBUSY;
@@ -371,16 +463,60 @@ static int stm32_qspi_setup(struct spi_device *spi)
flash->presc = presc;
mutex_lock(&qspi->lock);
- cr = FIELD_PREP(CR_FTHRES_MASK, 3) | CR_SSHIFT | CR_EN;
- writel_relaxed(cr, qspi->io_base + QSPI_CR);
+ qspi->cr_reg = FIELD_PREP(CR_FTHRES_MASK, 3) | CR_SSHIFT | CR_EN;
+ writel_relaxed(qspi->cr_reg, qspi->io_base + QSPI_CR);
/* set dcr fsize to max address */
- writel_relaxed(DCR_FSIZE_MASK, qspi->io_base + QSPI_DCR);
+ qspi->dcr_reg = DCR_FSIZE_MASK;
+ writel_relaxed(qspi->dcr_reg, qspi->io_base + QSPI_DCR);
mutex_unlock(&qspi->lock);
return 0;
}
+static void stm32_qspi_dma_setup(struct stm32_qspi *qspi)
+{
+ struct dma_slave_config dma_cfg;
+ struct device *dev = qspi->dev;
+
+ memset(&dma_cfg, 0, sizeof(dma_cfg));
+
+ dma_cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_cfg.src_addr = qspi->phys_base + QSPI_DR;
+ dma_cfg.dst_addr = qspi->phys_base + QSPI_DR;
+ dma_cfg.src_maxburst = 4;
+ dma_cfg.dst_maxburst = 4;
+
+ qspi->dma_chrx = dma_request_slave_channel(dev, "rx");
+ if (qspi->dma_chrx) {
+ if (dmaengine_slave_config(qspi->dma_chrx, &dma_cfg)) {
+ dev_err(dev, "dma rx config failed\n");
+ dma_release_channel(qspi->dma_chrx);
+ qspi->dma_chrx = NULL;
+ }
+ }
+
+ qspi->dma_chtx = dma_request_slave_channel(dev, "tx");
+ if (qspi->dma_chtx) {
+ if (dmaengine_slave_config(qspi->dma_chtx, &dma_cfg)) {
+ dev_err(dev, "dma tx config failed\n");
+ dma_release_channel(qspi->dma_chtx);
+ qspi->dma_chtx = NULL;
+ }
+ }
+
+ init_completion(&qspi->dma_completion);
+}
+
+static void stm32_qspi_dma_free(struct stm32_qspi *qspi)
+{
+ if (qspi->dma_chtx)
+ dma_release_channel(qspi->dma_chtx);
+ if (qspi->dma_chrx)
+ dma_release_channel(qspi->dma_chrx);
+}
+
/*
* no special host constraint, so use default spi_mem_default_supports_op
* to check supported mode.
@@ -393,8 +529,10 @@ static void stm32_qspi_release(struct stm32_qspi *qspi)
{
/* disable qspi */
writel_relaxed(0, qspi->io_base + QSPI_CR);
+ stm32_qspi_dma_free(qspi);
mutex_destroy(&qspi->lock);
clk_disable_unprepare(qspi->clk);
+ spi_master_put(qspi->ctrl);
}
static int stm32_qspi_probe(struct platform_device *pdev)
@@ -411,43 +549,62 @@ static int stm32_qspi_probe(struct platform_device *pdev)
return -ENOMEM;
qspi = spi_controller_get_devdata(ctrl);
+ qspi->ctrl = ctrl;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi");
qspi->io_base = devm_ioremap_resource(dev, res);
- if (IS_ERR(qspi->io_base))
- return PTR_ERR(qspi->io_base);
+ if (IS_ERR(qspi->io_base)) {
+ ret = PTR_ERR(qspi->io_base);
+ goto err;
+ }
+
+ qspi->phys_base = res->start;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi_mm");
qspi->mm_base = devm_ioremap_resource(dev, res);
- if (IS_ERR(qspi->mm_base))
- return PTR_ERR(qspi->mm_base);
+ if (IS_ERR(qspi->mm_base)) {
+ ret = PTR_ERR(qspi->mm_base);
+ goto err;
+ }
qspi->mm_size = resource_size(res);
- if (qspi->mm_size > STM32_QSPI_MAX_MMAP_SZ)
- return -EINVAL;
+ if (qspi->mm_size > STM32_QSPI_MAX_MMAP_SZ) {
+ ret = -EINVAL;
+ goto err;
+ }
irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ if (irq != -EPROBE_DEFER)
+ dev_err(dev, "IRQ error missing or invalid\n");
+ return irq;
+ }
+
ret = devm_request_irq(dev, irq, stm32_qspi_irq, 0,
dev_name(dev), qspi);
if (ret) {
dev_err(dev, "failed to request irq\n");
- return ret;
+ goto err;
}
init_completion(&qspi->data_completion);
qspi->clk = devm_clk_get(dev, NULL);
- if (IS_ERR(qspi->clk))
- return PTR_ERR(qspi->clk);
+ if (IS_ERR(qspi->clk)) {
+ ret = PTR_ERR(qspi->clk);
+ goto err;
+ }
qspi->clk_rate = clk_get_rate(qspi->clk);
- if (!qspi->clk_rate)
- return -EINVAL;
+ if (!qspi->clk_rate) {
+ ret = -EINVAL;
+ goto err;
+ }
ret = clk_prepare_enable(qspi->clk);
if (ret) {
dev_err(dev, "can not enable the clock\n");
- return ret;
+ goto err;
}
rstc = devm_reset_control_get_exclusive(dev, NULL);
@@ -459,6 +616,7 @@ static int stm32_qspi_probe(struct platform_device *pdev)
qspi->dev = dev;
platform_set_drvdata(pdev, qspi);
+ stm32_qspi_dma_setup(qspi);
mutex_init(&qspi->lock);
ctrl->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD
@@ -470,14 +628,11 @@ static int stm32_qspi_probe(struct platform_device *pdev)
ctrl->dev.of_node = dev->of_node;
ret = devm_spi_register_master(dev, ctrl);
- if (ret)
- goto err_spi_register;
-
- return 0;
+ if (!ret)
+ return 0;
-err_spi_register:
+err:
stm32_qspi_release(qspi);
-
return ret;
}
@@ -489,6 +644,31 @@ static int stm32_qspi_remove(struct platform_device *pdev)
return 0;
}
+static int __maybe_unused stm32_qspi_suspend(struct device *dev)
+{
+ struct stm32_qspi *qspi = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(qspi->clk);
+ pinctrl_pm_select_sleep_state(dev);
+
+ return 0;
+}
+
+static int __maybe_unused stm32_qspi_resume(struct device *dev)
+{
+ struct stm32_qspi *qspi = dev_get_drvdata(dev);
+
+ pinctrl_pm_select_default_state(dev);
+ clk_prepare_enable(qspi->clk);
+
+ writel_relaxed(qspi->cr_reg, qspi->io_base + QSPI_CR);
+ writel_relaxed(qspi->dcr_reg, qspi->io_base + QSPI_DCR);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(stm32_qspi_pm_ops, stm32_qspi_suspend, stm32_qspi_resume);
+
static const struct of_device_id stm32_qspi_match[] = {
{.compatible = "st,stm32f469-qspi"},
{}
@@ -501,6 +681,7 @@ static struct platform_driver stm32_qspi_driver = {
.driver = {
.name = "stm32-qspi",
.of_match_table = stm32_qspi_match,
+ .pm = &stm32_qspi_pm_ops,
},
};
module_platform_driver(stm32_qspi_driver);
diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c
index 21e4fdad013f..b1f31bb16659 100644
--- a/drivers/spi/spi-tegra114.c
+++ b/drivers/spi/spi-tegra114.c
@@ -149,6 +149,8 @@
#define SPI_TX_FIFO 0x108
#define SPI_RX_FIFO 0x188
+#define SPI_INTR_MASK 0x18c
+#define SPI_INTR_ALL_MASK (0x1fUL << 25)
#define MAX_CHIP_SELECT 4
#define SPI_FIFO_DEPTH 64
#define DATA_DIR_TX (1 << 0)
@@ -161,6 +163,10 @@
#define MAX_HOLD_CYCLES 16
#define SPI_DEFAULT_SPEED 25000000
+struct tegra_spi_soc_data {
+ bool has_intr_mask_reg;
+};
+
struct tegra_spi_data {
struct device *dev;
struct spi_master *master;
@@ -211,6 +217,7 @@ struct tegra_spi_data {
u32 *tx_dma_buf;
dma_addr_t tx_dma_phys;
struct dma_async_tx_descriptor *tx_dma_desc;
+ const struct tegra_spi_soc_data *soc_data;
};
static int tegra_spi_runtime_suspend(struct device *dev);
@@ -259,7 +266,8 @@ static unsigned tegra_spi_calculate_curr_xfer_param(
tspi->bytes_per_word = DIV_ROUND_UP(bits_per_word, 8);
- if (bits_per_word == 8 || bits_per_word == 16) {
+ if ((bits_per_word == 8 || bits_per_word == 16 ||
+ bits_per_word == 32) && t->len > 3) {
tspi->is_packed = 1;
tspi->words_per_32bit = 32/bits_per_word;
} else {
@@ -553,11 +561,13 @@ static int tegra_spi_start_dma_based_transfer(
dma_burst = 8;
}
- if (tspi->cur_direction & DATA_DIR_TX)
- val |= SPI_IE_TX;
+ if (!tspi->soc_data->has_intr_mask_reg) {
+ if (tspi->cur_direction & DATA_DIR_TX)
+ val |= SPI_IE_TX;
- if (tspi->cur_direction & DATA_DIR_RX)
- val |= SPI_IE_RX;
+ if (tspi->cur_direction & DATA_DIR_RX)
+ val |= SPI_IE_RX;
+ }
tegra_spi_writel(tspi, val, SPI_DMA_CTL);
tspi->dma_control_reg = val;
@@ -749,6 +759,16 @@ static u32 tegra_spi_setup_transfer_one(struct spi_device *spi,
else if (req_mode == SPI_MODE_3)
command1 |= SPI_CONTROL_MODE_3;
+ if (spi->mode & SPI_LSB_FIRST)
+ command1 |= SPI_LSBIT_FE;
+ else
+ command1 &= ~SPI_LSBIT_FE;
+
+ if (spi->mode & SPI_3WIRE)
+ command1 |= SPI_BIDIROE;
+ else
+ command1 &= ~SPI_BIDIROE;
+
if (tspi->cs_control) {
if (tspi->cs_control != spi)
tegra_spi_writel(tspi, command1, SPI_COMMAND1);
@@ -781,6 +801,11 @@ static int tegra_spi_start_transfer_one(struct spi_device *spi,
total_fifo_words = tegra_spi_calculate_curr_xfer_param(spi, tspi, t);
+ if (t->rx_nbits == SPI_NBITS_DUAL || t->tx_nbits == SPI_NBITS_DUAL)
+ command1 |= SPI_BOTH_EN_BIT;
+ else
+ command1 &= ~SPI_BOTH_EN_BIT;
+
if (tspi->is_packed)
command1 |= SPI_PACKED;
else
@@ -832,6 +857,12 @@ static int tegra_spi_setup(struct spi_device *spi)
return ret;
}
+ if (tspi->soc_data->has_intr_mask_reg) {
+ val = tegra_spi_readl(tspi, SPI_INTR_MASK);
+ val &= ~SPI_INTR_ALL_MASK;
+ tegra_spi_writel(tspi, val, SPI_INTR_MASK);
+ }
+
spin_lock_irqsave(&tspi->lock, flags);
val = tspi->def_command1_reg;
if (spi->mode & SPI_CS_HIGH)
@@ -870,6 +901,20 @@ static void tegra_spi_transfer_end(struct spi_device *spi)
tegra_spi_writel(tspi, tspi->def_command1_reg, SPI_COMMAND1);
}
+static void tegra_spi_dump_regs(struct tegra_spi_data *tspi)
+{
+ dev_dbg(tspi->dev, "============ SPI REGISTER DUMP ============\n");
+ dev_dbg(tspi->dev, "Command1: 0x%08x | Command2: 0x%08x\n",
+ tegra_spi_readl(tspi, SPI_COMMAND1),
+ tegra_spi_readl(tspi, SPI_COMMAND2));
+ dev_dbg(tspi->dev, "DMA_CTL: 0x%08x | DMA_BLK: 0x%08x\n",
+ tegra_spi_readl(tspi, SPI_DMA_CTL),
+ tegra_spi_readl(tspi, SPI_DMA_BLK));
+ dev_dbg(tspi->dev, "TRANS_STAT: 0x%08x | FIFO_STATUS: 0x%08x\n",
+ tegra_spi_readl(tspi, SPI_TRANS_STATUS),
+ tegra_spi_readl(tspi, SPI_FIFO_STATUS));
+}
+
static int tegra_spi_transfer_one_message(struct spi_master *master,
struct spi_message *msg)
{
@@ -916,6 +961,7 @@ static int tegra_spi_transfer_one_message(struct spi_master *master,
(tspi->cur_direction & DATA_DIR_RX))
dmaengine_terminate_all(tspi->rx_dma_chan);
ret = -EIO;
+ tegra_spi_dump_regs(tspi);
tegra_spi_flush_fifos(tspi);
reset_control_assert(tspi->rst);
udelay(2);
@@ -926,6 +972,7 @@ static int tegra_spi_transfer_one_message(struct spi_master *master,
if (tspi->tx_status || tspi->rx_status) {
dev_err(tspi->dev, "Error in Transfer\n");
ret = -EIO;
+ tegra_spi_dump_regs(tspi);
goto complete_xfer;
}
msg->actual_length += xfer->len;
@@ -967,6 +1014,7 @@ static irqreturn_t handle_cpu_based_xfer(struct tegra_spi_data *tspi)
tspi->status_reg);
dev_err(tspi->dev, "CpuXfer 0x%08x:0x%08x\n",
tspi->command1_reg, tspi->dma_control_reg);
+ tegra_spi_dump_regs(tspi);
tegra_spi_flush_fifos(tspi);
complete(&tspi->xfer_completion);
spin_unlock_irqrestore(&tspi->lock, flags);
@@ -1041,6 +1089,7 @@ static irqreturn_t handle_dma_based_xfer(struct tegra_spi_data *tspi)
tspi->status_reg);
dev_err(tspi->dev, "DmaXfer 0x%08x:0x%08x\n",
tspi->command1_reg, tspi->dma_control_reg);
+ tegra_spi_dump_regs(tspi);
tegra_spi_flush_fifos(tspi);
complete(&tspi->xfer_completion);
spin_unlock_irqrestore(&tspi->lock, flags);
@@ -1102,8 +1151,29 @@ static irqreturn_t tegra_spi_isr(int irq, void *context_data)
return IRQ_WAKE_THREAD;
}
+static struct tegra_spi_soc_data tegra114_spi_soc_data = {
+ .has_intr_mask_reg = false,
+};
+
+static struct tegra_spi_soc_data tegra124_spi_soc_data = {
+ .has_intr_mask_reg = false,
+};
+
+static struct tegra_spi_soc_data tegra210_spi_soc_data = {
+ .has_intr_mask_reg = true,
+};
+
static const struct of_device_id tegra_spi_of_match[] = {
- { .compatible = "nvidia,tegra114-spi", },
+ {
+ .compatible = "nvidia,tegra114-spi",
+ .data = &tegra114_spi_soc_data,
+ }, {
+ .compatible = "nvidia,tegra124-spi",
+ .data = &tegra124_spi_soc_data,
+ }, {
+ .compatible = "nvidia,tegra210-spi",
+ .data = &tegra210_spi_soc_data,
+ },
{}
};
MODULE_DEVICE_TABLE(of, tegra_spi_of_match);
@@ -1114,6 +1184,7 @@ static int tegra_spi_probe(struct platform_device *pdev)
struct tegra_spi_data *tspi;
struct resource *r;
int ret, spi_irq;
+ int bus_num;
master = spi_alloc_master(&pdev->dev, sizeof(*tspi));
if (!master) {
@@ -1128,16 +1199,28 @@ static int tegra_spi_probe(struct platform_device *pdev)
master->max_speed_hz = 25000000; /* 25MHz */
/* the spi->mode bits understood by this driver: */
- master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST |
+ SPI_TX_DUAL | SPI_RX_DUAL | SPI_3WIRE;
+ master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
master->setup = tegra_spi_setup;
master->transfer_one_message = tegra_spi_transfer_one_message;
master->num_chipselect = MAX_CHIP_SELECT;
master->auto_runtime_pm = true;
+ bus_num = of_alias_get_id(pdev->dev.of_node, "spi");
+ if (bus_num >= 0)
+ master->bus_num = bus_num;
tspi->master = master;
tspi->dev = &pdev->dev;
spin_lock_init(&tspi->lock);
+ tspi->soc_data = of_device_get_match_data(&pdev->dev);
+ if (!tspi->soc_data) {
+ dev_err(&pdev->dev, "unsupported tegra\n");
+ ret = -ENODEV;
+ goto exit_free_master;
+ }
+
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
tspi->base = devm_ioremap_resource(&pdev->dev, r);
if (IS_ERR(tspi->base)) {
diff --git a/drivers/spi/spi-zynq-qspi.c b/drivers/spi/spi-zynq-qspi.c
new file mode 100644
index 000000000000..c6bee67decb5
--- /dev/null
+++ b/drivers/spi/spi-zynq-qspi.c
@@ -0,0 +1,761 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Xilinx, Inc.
+ *
+ * Author: Naga Sureshkumar Relli <nagasure@xilinx.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/workqueue.h>
+#include <linux/spi/spi-mem.h>
+
+/* Register offset definitions */
+#define ZYNQ_QSPI_CONFIG_OFFSET 0x00 /* Configuration Register, RW */
+#define ZYNQ_QSPI_STATUS_OFFSET 0x04 /* Interrupt Status Register, RO */
+#define ZYNQ_QSPI_IEN_OFFSET 0x08 /* Interrupt Enable Register, WO */
+#define ZYNQ_QSPI_IDIS_OFFSET 0x0C /* Interrupt Disable Reg, WO */
+#define ZYNQ_QSPI_IMASK_OFFSET 0x10 /* Interrupt Enabled Mask Reg,RO */
+#define ZYNQ_QSPI_ENABLE_OFFSET 0x14 /* Enable/Disable Register, RW */
+#define ZYNQ_QSPI_DELAY_OFFSET 0x18 /* Delay Register, RW */
+#define ZYNQ_QSPI_TXD_00_00_OFFSET 0x1C /* Transmit 4-byte inst, WO */
+#define ZYNQ_QSPI_TXD_00_01_OFFSET 0x80 /* Transmit 1-byte inst, WO */
+#define ZYNQ_QSPI_TXD_00_10_OFFSET 0x84 /* Transmit 2-byte inst, WO */
+#define ZYNQ_QSPI_TXD_00_11_OFFSET 0x88 /* Transmit 3-byte inst, WO */
+#define ZYNQ_QSPI_RXD_OFFSET 0x20 /* Data Receive Register, RO */
+#define ZYNQ_QSPI_SIC_OFFSET 0x24 /* Slave Idle Count Register, RW */
+#define ZYNQ_QSPI_TX_THRESH_OFFSET 0x28 /* TX FIFO Watermark Reg, RW */
+#define ZYNQ_QSPI_RX_THRESH_OFFSET 0x2C /* RX FIFO Watermark Reg, RW */
+#define ZYNQ_QSPI_GPIO_OFFSET 0x30 /* GPIO Register, RW */
+#define ZYNQ_QSPI_LINEAR_CFG_OFFSET 0xA0 /* Linear Adapter Config Ref, RW */
+#define ZYNQ_QSPI_MOD_ID_OFFSET 0xFC /* Module ID Register, RO */
+
+/*
+ * QSPI Configuration Register bit Masks
+ *
+ * This register contains various control bits that effect the operation
+ * of the QSPI controller
+ */
+#define ZYNQ_QSPI_CONFIG_IFMODE_MASK BIT(31) /* Flash Memory Interface */
+#define ZYNQ_QSPI_CONFIG_MANSRT_MASK BIT(16) /* Manual TX Start */
+#define ZYNQ_QSPI_CONFIG_MANSRTEN_MASK BIT(15) /* Enable Manual TX Mode */
+#define ZYNQ_QSPI_CONFIG_SSFORCE_MASK BIT(14) /* Manual Chip Select */
+#define ZYNQ_QSPI_CONFIG_BDRATE_MASK GENMASK(5, 3) /* Baud Rate Mask */
+#define ZYNQ_QSPI_CONFIG_CPHA_MASK BIT(2) /* Clock Phase Control */
+#define ZYNQ_QSPI_CONFIG_CPOL_MASK BIT(1) /* Clock Polarity Control */
+#define ZYNQ_QSPI_CONFIG_SSCTRL_MASK BIT(10) /* Slave Select Mask */
+#define ZYNQ_QSPI_CONFIG_FWIDTH_MASK GENMASK(7, 6) /* FIFO width */
+#define ZYNQ_QSPI_CONFIG_MSTREN_MASK BIT(0) /* Master Mode */
+
+/*
+ * QSPI Configuration Register - Baud rate and slave select
+ *
+ * These are the values used in the calculation of baud rate divisor and
+ * setting the slave select.
+ */
+#define ZYNQ_QSPI_BAUD_DIV_MAX GENMASK(2, 0) /* Baud rate maximum */
+#define ZYNQ_QSPI_BAUD_DIV_SHIFT 3 /* Baud rate divisor shift in CR */
+#define ZYNQ_QSPI_SS_SHIFT 10 /* Slave Select field shift in CR */
+
+/*
+ * QSPI Interrupt Registers bit Masks
+ *
+ * All the four interrupt registers (Status/Mask/Enable/Disable) have the same
+ * bit definitions.
+ */
+#define ZYNQ_QSPI_IXR_RX_OVERFLOW_MASK BIT(0) /* QSPI RX FIFO Overflow */
+#define ZYNQ_QSPI_IXR_TXNFULL_MASK BIT(2) /* QSPI TX FIFO Overflow */
+#define ZYNQ_QSPI_IXR_TXFULL_MASK BIT(3) /* QSPI TX FIFO is full */
+#define ZYNQ_QSPI_IXR_RXNEMTY_MASK BIT(4) /* QSPI RX FIFO Not Empty */
+#define ZYNQ_QSPI_IXR_RXF_FULL_MASK BIT(5) /* QSPI RX FIFO is full */
+#define ZYNQ_QSPI_IXR_TXF_UNDRFLOW_MASK BIT(6) /* QSPI TX FIFO Underflow */
+#define ZYNQ_QSPI_IXR_ALL_MASK (ZYNQ_QSPI_IXR_RX_OVERFLOW_MASK | \
+ ZYNQ_QSPI_IXR_TXNFULL_MASK | \
+ ZYNQ_QSPI_IXR_TXFULL_MASK | \
+ ZYNQ_QSPI_IXR_RXNEMTY_MASK | \
+ ZYNQ_QSPI_IXR_RXF_FULL_MASK | \
+ ZYNQ_QSPI_IXR_TXF_UNDRFLOW_MASK)
+#define ZYNQ_QSPI_IXR_RXTX_MASK (ZYNQ_QSPI_IXR_TXNFULL_MASK | \
+ ZYNQ_QSPI_IXR_RXNEMTY_MASK)
+
+/*
+ * QSPI Enable Register bit Masks
+ *
+ * This register is used to enable or disable the QSPI controller
+ */
+#define ZYNQ_QSPI_ENABLE_ENABLE_MASK BIT(0) /* QSPI Enable Bit Mask */
+
+/*
+ * QSPI Linear Configuration Register
+ *
+ * It is named Linear Configuration but it controls other modes when not in
+ * linear mode also.
+ */
+#define ZYNQ_QSPI_LCFG_TWO_MEM_MASK BIT(30) /* LQSPI Two memories Mask */
+#define ZYNQ_QSPI_LCFG_SEP_BUS_MASK BIT(29) /* LQSPI Separate bus Mask */
+#define ZYNQ_QSPI_LCFG_U_PAGE_MASK BIT(28) /* LQSPI Upper Page Mask */
+
+#define ZYNQ_QSPI_LCFG_DUMMY_SHIFT 8
+
+#define ZYNQ_QSPI_FAST_READ_QOUT_CODE 0x6B /* read instruction code */
+#define ZYNQ_QSPI_FIFO_DEPTH 63 /* FIFO depth in words */
+#define ZYNQ_QSPI_RX_THRESHOLD 32 /* Rx FIFO threshold level */
+#define ZYNQ_QSPI_TX_THRESHOLD 1 /* Tx FIFO threshold level */
+
+/*
+ * The modebits configurable by the driver to make the SPI support different
+ * data formats
+ */
+#define ZYNQ_QSPI_MODEBITS (SPI_CPOL | SPI_CPHA)
+
+/* Default number of chip selects */
+#define ZYNQ_QSPI_DEFAULT_NUM_CS 1
+
+/**
+ * struct zynq_qspi - Defines qspi driver instance
+ * @regs: Virtual address of the QSPI controller registers
+ * @refclk: Pointer to the peripheral clock
+ * @pclk: Pointer to the APB clock
+ * @irq: IRQ number
+ * @txbuf: Pointer to the TX buffer
+ * @rxbuf: Pointer to the RX buffer
+ * @tx_bytes: Number of bytes left to transfer
+ * @rx_bytes: Number of bytes left to receive
+ * @data_completion: completion structure
+ */
+struct zynq_qspi {
+ struct device *dev;
+ void __iomem *regs;
+ struct clk *refclk;
+ struct clk *pclk;
+ int irq;
+ u8 *txbuf;
+ u8 *rxbuf;
+ int tx_bytes;
+ int rx_bytes;
+ struct completion data_completion;
+};
+
+/*
+ * Inline functions for the QSPI controller read/write
+ */
+static inline u32 zynq_qspi_read(struct zynq_qspi *xqspi, u32 offset)
+{
+ return readl_relaxed(xqspi->regs + offset);
+}
+
+static inline void zynq_qspi_write(struct zynq_qspi *xqspi, u32 offset,
+ u32 val)
+{
+ writel_relaxed(val, xqspi->regs + offset);
+}
+
+/**
+ * zynq_qspi_init_hw - Initialize the hardware
+ * @xqspi: Pointer to the zynq_qspi structure
+ *
+ * The default settings of the QSPI controller's configurable parameters on
+ * reset are
+ * - Master mode
+ * - Baud rate divisor is set to 2
+ * - Tx threshold set to 1l Rx threshold set to 32
+ * - Flash memory interface mode enabled
+ * - Size of the word to be transferred as 8 bit
+ * This function performs the following actions
+ * - Disable and clear all the interrupts
+ * - Enable manual slave select
+ * - Enable manual start
+ * - Deselect all the chip select lines
+ * - Set the size of the word to be transferred as 32 bit
+ * - Set the little endian mode of TX FIFO and
+ * - Enable the QSPI controller
+ */
+static void zynq_qspi_init_hw(struct zynq_qspi *xqspi)
+{
+ u32 config_reg;
+
+ zynq_qspi_write(xqspi, ZYNQ_QSPI_ENABLE_OFFSET, 0);
+ zynq_qspi_write(xqspi, ZYNQ_QSPI_IDIS_OFFSET, ZYNQ_QSPI_IXR_ALL_MASK);
+
+ /* Disable linear mode as the boot loader may have used it */
+ zynq_qspi_write(xqspi, ZYNQ_QSPI_LINEAR_CFG_OFFSET, 0);
+
+ /* Clear the RX FIFO */
+ while (zynq_qspi_read(xqspi, ZYNQ_QSPI_STATUS_OFFSET) &
+ ZYNQ_QSPI_IXR_RXNEMTY_MASK)
+ zynq_qspi_read(xqspi, ZYNQ_QSPI_RXD_OFFSET);
+
+ zynq_qspi_write(xqspi, ZYNQ_QSPI_STATUS_OFFSET, ZYNQ_QSPI_IXR_ALL_MASK);
+ config_reg = zynq_qspi_read(xqspi, ZYNQ_QSPI_CONFIG_OFFSET);
+ config_reg &= ~(ZYNQ_QSPI_CONFIG_MSTREN_MASK |
+ ZYNQ_QSPI_CONFIG_CPOL_MASK |
+ ZYNQ_QSPI_CONFIG_CPHA_MASK |
+ ZYNQ_QSPI_CONFIG_BDRATE_MASK |
+ ZYNQ_QSPI_CONFIG_SSFORCE_MASK |
+ ZYNQ_QSPI_CONFIG_MANSRTEN_MASK |
+ ZYNQ_QSPI_CONFIG_MANSRT_MASK);
+ config_reg |= (ZYNQ_QSPI_CONFIG_MSTREN_MASK |
+ ZYNQ_QSPI_CONFIG_SSFORCE_MASK |
+ ZYNQ_QSPI_CONFIG_FWIDTH_MASK |
+ ZYNQ_QSPI_CONFIG_IFMODE_MASK);
+ zynq_qspi_write(xqspi, ZYNQ_QSPI_CONFIG_OFFSET, config_reg);
+
+ zynq_qspi_write(xqspi, ZYNQ_QSPI_RX_THRESH_OFFSET,
+ ZYNQ_QSPI_RX_THRESHOLD);
+ zynq_qspi_write(xqspi, ZYNQ_QSPI_TX_THRESH_OFFSET,
+ ZYNQ_QSPI_TX_THRESHOLD);
+
+ zynq_qspi_write(xqspi, ZYNQ_QSPI_ENABLE_OFFSET,
+ ZYNQ_QSPI_ENABLE_ENABLE_MASK);
+}
+
+static bool zynq_qspi_supports_op(struct spi_mem *mem,
+ const struct spi_mem_op *op)
+{
+ if (!spi_mem_default_supports_op(mem, op))
+ return false;
+
+ /*
+ * The number of address bytes should be equal to or less than 3 bytes.
+ */
+ if (op->addr.nbytes > 3)
+ return false;
+
+ return true;
+}
+
+/**
+ * zynq_qspi_rxfifo_op - Read 1..4 bytes from RxFIFO to RX buffer
+ * @xqspi: Pointer to the zynq_qspi structure
+ * @size: Number of bytes to be read (1..4)
+ */
+static void zynq_qspi_rxfifo_op(struct zynq_qspi *xqspi, unsigned int size)
+{
+ u32 data;
+
+ data = zynq_qspi_read(xqspi, ZYNQ_QSPI_RXD_OFFSET);
+
+ if (xqspi->rxbuf) {
+ memcpy(xqspi->rxbuf, ((u8 *)&data) + 4 - size, size);
+ xqspi->rxbuf += size;
+ }
+
+ xqspi->rx_bytes -= size;
+ if (xqspi->rx_bytes < 0)
+ xqspi->rx_bytes = 0;
+}
+
+/**
+ * zynq_qspi_txfifo_op - Write 1..4 bytes from TX buffer to TxFIFO
+ * @xqspi: Pointer to the zynq_qspi structure
+ * @size: Number of bytes to be written (1..4)
+ */
+static void zynq_qspi_txfifo_op(struct zynq_qspi *xqspi, unsigned int size)
+{
+ static const unsigned int offset[4] = {
+ ZYNQ_QSPI_TXD_00_01_OFFSET, ZYNQ_QSPI_TXD_00_10_OFFSET,
+ ZYNQ_QSPI_TXD_00_11_OFFSET, ZYNQ_QSPI_TXD_00_00_OFFSET };
+ u32 data;
+
+ if (xqspi->txbuf) {
+ data = 0xffffffff;
+ memcpy(&data, xqspi->txbuf, size);
+ xqspi->txbuf += size;
+ } else {
+ data = 0;
+ }
+
+ xqspi->tx_bytes -= size;
+ zynq_qspi_write(xqspi, offset[size - 1], data);
+}
+
+/**
+ * zynq_qspi_chipselect - Select or deselect the chip select line
+ * @spi: Pointer to the spi_device structure
+ * @assert: 1 for select or 0 for deselect the chip select line
+ */
+static void zynq_qspi_chipselect(struct spi_device *spi, bool assert)
+{
+ struct spi_controller *ctrl = spi->master;
+ struct zynq_qspi *xqspi = spi_controller_get_devdata(ctrl);
+ u32 config_reg;
+
+ config_reg = zynq_qspi_read(xqspi, ZYNQ_QSPI_CONFIG_OFFSET);
+ if (assert) {
+ /* Select the slave */
+ config_reg &= ~ZYNQ_QSPI_CONFIG_SSCTRL_MASK;
+ config_reg |= (((~(BIT(spi->chip_select))) <<
+ ZYNQ_QSPI_SS_SHIFT) &
+ ZYNQ_QSPI_CONFIG_SSCTRL_MASK);
+ } else {
+ config_reg |= ZYNQ_QSPI_CONFIG_SSCTRL_MASK;
+ }
+
+ zynq_qspi_write(xqspi, ZYNQ_QSPI_CONFIG_OFFSET, config_reg);
+}
+
+/**
+ * zynq_qspi_config_op - Configure QSPI controller for specified transfer
+ * @xqspi: Pointer to the zynq_qspi structure
+ * @qspi: Pointer to the spi_device structure
+ *
+ * Sets the operational mode of QSPI controller for the next QSPI transfer and
+ * sets the requested clock frequency.
+ *
+ * Return: 0 on success and -EINVAL on invalid input parameter
+ *
+ * Note: If the requested frequency is not an exact match with what can be
+ * obtained using the prescalar value, the driver sets the clock frequency which
+ * is lower than the requested frequency (maximum lower) for the transfer. If
+ * the requested frequency is higher or lower than that is supported by the QSPI
+ * controller the driver will set the highest or lowest frequency supported by
+ * controller.
+ */
+static int zynq_qspi_config_op(struct zynq_qspi *xqspi, struct spi_device *spi)
+{
+ u32 config_reg, baud_rate_val = 0;
+
+ /*
+ * Set the clock frequency
+ * The baud rate divisor is not a direct mapping to the value written
+ * into the configuration register (config_reg[5:3])
+ * i.e. 000 - divide by 2
+ * 001 - divide by 4
+ * ----------------
+ * 111 - divide by 256
+ */
+ while ((baud_rate_val < ZYNQ_QSPI_BAUD_DIV_MAX) &&
+ (clk_get_rate(xqspi->refclk) / (2 << baud_rate_val)) >
+ spi->max_speed_hz)
+ baud_rate_val++;
+
+ config_reg = zynq_qspi_read(xqspi, ZYNQ_QSPI_CONFIG_OFFSET);
+
+ /* Set the QSPI clock phase and clock polarity */
+ config_reg &= (~ZYNQ_QSPI_CONFIG_CPHA_MASK) &
+ (~ZYNQ_QSPI_CONFIG_CPOL_MASK);
+ if (spi->mode & SPI_CPHA)
+ config_reg |= ZYNQ_QSPI_CONFIG_CPHA_MASK;
+ if (spi->mode & SPI_CPOL)
+ config_reg |= ZYNQ_QSPI_CONFIG_CPOL_MASK;
+
+ config_reg &= ~ZYNQ_QSPI_CONFIG_BDRATE_MASK;
+ config_reg |= (baud_rate_val << ZYNQ_QSPI_BAUD_DIV_SHIFT);
+ zynq_qspi_write(xqspi, ZYNQ_QSPI_CONFIG_OFFSET, config_reg);
+
+ return 0;
+}
+
+/**
+ * zynq_qspi_setup - Configure the QSPI controller
+ * @spi: Pointer to the spi_device structure
+ *
+ * Sets the operational mode of QSPI controller for the next QSPI transfer, baud
+ * rate and divisor value to setup the requested qspi clock.
+ *
+ * Return: 0 on success and error value on failure
+ */
+static int zynq_qspi_setup_op(struct spi_device *spi)
+{
+ struct spi_controller *ctrl = spi->master;
+ struct zynq_qspi *qspi = spi_controller_get_devdata(ctrl);
+
+ if (ctrl->busy)
+ return -EBUSY;
+
+ clk_enable(qspi->refclk);
+ clk_enable(qspi->pclk);
+ zynq_qspi_write(qspi, ZYNQ_QSPI_ENABLE_OFFSET,
+ ZYNQ_QSPI_ENABLE_ENABLE_MASK);
+
+ return 0;
+}
+
+/**
+ * zynq_qspi_write_op - Fills the TX FIFO with as many bytes as possible
+ * @xqspi: Pointer to the zynq_qspi structure
+ * @txcount: Maximum number of words to write
+ * @txempty: Indicates that TxFIFO is empty
+ */
+static void zynq_qspi_write_op(struct zynq_qspi *xqspi, int txcount,
+ bool txempty)
+{
+ int count, len, k;
+
+ len = xqspi->tx_bytes;
+ if (len && len < 4) {
+ /*
+ * We must empty the TxFIFO between accesses to TXD0,
+ * TXD1, TXD2, TXD3.
+ */
+ if (txempty)
+ zynq_qspi_txfifo_op(xqspi, len);
+
+ return;
+ }
+
+ count = len / 4;
+ if (count > txcount)
+ count = txcount;
+
+ if (xqspi->txbuf) {
+ iowrite32_rep(xqspi->regs + ZYNQ_QSPI_TXD_00_00_OFFSET,
+ xqspi->txbuf, count);
+ xqspi->txbuf += count * 4;
+ } else {
+ for (k = 0; k < count; k++)
+ writel_relaxed(0, xqspi->regs +
+ ZYNQ_QSPI_TXD_00_00_OFFSET);
+ }
+
+ xqspi->tx_bytes -= count * 4;
+}
+
+/**
+ * zynq_qspi_read_op - Drains the RX FIFO by as many bytes as possible
+ * @xqspi: Pointer to the zynq_qspi structure
+ * @rxcount: Maximum number of words to read
+ */
+static void zynq_qspi_read_op(struct zynq_qspi *xqspi, int rxcount)
+{
+ int count, len, k;
+
+ len = xqspi->rx_bytes - xqspi->tx_bytes;
+ count = len / 4;
+ if (count > rxcount)
+ count = rxcount;
+ if (xqspi->rxbuf) {
+ ioread32_rep(xqspi->regs + ZYNQ_QSPI_RXD_OFFSET,
+ xqspi->rxbuf, count);
+ xqspi->rxbuf += count * 4;
+ } else {
+ for (k = 0; k < count; k++)
+ readl_relaxed(xqspi->regs + ZYNQ_QSPI_RXD_OFFSET);
+ }
+ xqspi->rx_bytes -= count * 4;
+ len -= count * 4;
+
+ if (len && len < 4 && count < rxcount)
+ zynq_qspi_rxfifo_op(xqspi, len);
+}
+
+/**
+ * zynq_qspi_irq - Interrupt service routine of the QSPI controller
+ * @irq: IRQ number
+ * @dev_id: Pointer to the xqspi structure
+ *
+ * This function handles TX empty only.
+ * On TX empty interrupt this function reads the received data from RX FIFO and
+ * fills the TX FIFO if there is any data remaining to be transferred.
+ *
+ * Return: IRQ_HANDLED when interrupt is handled; IRQ_NONE otherwise.
+ */
+static irqreturn_t zynq_qspi_irq(int irq, void *dev_id)
+{
+ u32 intr_status;
+ bool txempty;
+ struct zynq_qspi *xqspi = (struct zynq_qspi *)dev_id;
+
+ intr_status = zynq_qspi_read(xqspi, ZYNQ_QSPI_STATUS_OFFSET);
+ zynq_qspi_write(xqspi, ZYNQ_QSPI_STATUS_OFFSET, intr_status);
+
+ if ((intr_status & ZYNQ_QSPI_IXR_TXNFULL_MASK) ||
+ (intr_status & ZYNQ_QSPI_IXR_RXNEMTY_MASK)) {
+ /*
+ * This bit is set when Tx FIFO has < THRESHOLD entries.
+ * We have the THRESHOLD value set to 1,
+ * so this bit indicates Tx FIFO is empty.
+ */
+ txempty = !!(intr_status & ZYNQ_QSPI_IXR_TXNFULL_MASK);
+ /* Read out the data from the RX FIFO */
+ zynq_qspi_read_op(xqspi, ZYNQ_QSPI_RX_THRESHOLD);
+ if (xqspi->tx_bytes) {
+ /* There is more data to send */
+ zynq_qspi_write_op(xqspi, ZYNQ_QSPI_RX_THRESHOLD,
+ txempty);
+ } else {
+ /*
+ * If transfer and receive is completed then only send
+ * complete signal.
+ */
+ if (!xqspi->rx_bytes) {
+ zynq_qspi_write(xqspi,
+ ZYNQ_QSPI_IDIS_OFFSET,
+ ZYNQ_QSPI_IXR_RXTX_MASK);
+ complete(&xqspi->data_completion);
+ }
+ }
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
+/**
+ * zynq_qspi_exec_mem_op() - Initiates the QSPI transfer
+ * @mem: the SPI memory
+ * @op: the memory operation to execute
+ *
+ * Executes a memory operation.
+ *
+ * This function first selects the chip and starts the memory operation.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
+ const struct spi_mem_op *op)
+{
+ struct zynq_qspi *xqspi = spi_controller_get_devdata(mem->spi->master);
+ int err = 0, i;
+ u8 *tmpbuf;
+
+ dev_dbg(xqspi->dev, "cmd:%#x mode:%d.%d.%d.%d\n",
+ op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth,
+ op->dummy.buswidth, op->data.buswidth);
+
+ zynq_qspi_chipselect(mem->spi, true);
+ zynq_qspi_config_op(xqspi, mem->spi);
+
+ if (op->cmd.opcode) {
+ reinit_completion(&xqspi->data_completion);
+ xqspi->txbuf = (u8 *)&op->cmd.opcode;
+ xqspi->rxbuf = NULL;
+ xqspi->tx_bytes = sizeof(op->cmd.opcode);
+ xqspi->rx_bytes = sizeof(op->cmd.opcode);
+ zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true);
+ zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET,
+ ZYNQ_QSPI_IXR_RXTX_MASK);
+ if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion,
+ msecs_to_jiffies(1000)))
+ err = -ETIMEDOUT;
+ }
+
+ if (op->addr.nbytes) {
+ for (i = 0; i < op->addr.nbytes; i++) {
+ xqspi->txbuf[i] = op->addr.val >>
+ (8 * (op->addr.nbytes - i - 1));
+ }
+
+ reinit_completion(&xqspi->data_completion);
+ xqspi->rxbuf = NULL;
+ xqspi->tx_bytes = op->addr.nbytes;
+ xqspi->rx_bytes = op->addr.nbytes;
+ zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true);
+ zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET,
+ ZYNQ_QSPI_IXR_RXTX_MASK);
+ if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion,
+ msecs_to_jiffies(1000)))
+ err = -ETIMEDOUT;
+ }
+
+ if (op->dummy.nbytes) {
+ tmpbuf = kzalloc(op->dummy.nbytes, GFP_KERNEL);
+ memset(tmpbuf, 0xff, op->dummy.nbytes);
+ reinit_completion(&xqspi->data_completion);
+ xqspi->txbuf = tmpbuf;
+ xqspi->rxbuf = NULL;
+ xqspi->tx_bytes = op->dummy.nbytes;
+ xqspi->rx_bytes = op->dummy.nbytes;
+ zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true);
+ zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET,
+ ZYNQ_QSPI_IXR_RXTX_MASK);
+ if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion,
+ msecs_to_jiffies(1000)))
+ err = -ETIMEDOUT;
+
+ kfree(tmpbuf);
+ }
+
+ if (op->data.nbytes) {
+ reinit_completion(&xqspi->data_completion);
+ if (op->data.dir == SPI_MEM_DATA_OUT) {
+ xqspi->txbuf = (u8 *)op->data.buf.out;
+ xqspi->tx_bytes = op->data.nbytes;
+ xqspi->rxbuf = NULL;
+ xqspi->rx_bytes = op->data.nbytes;
+ } else {
+ xqspi->txbuf = NULL;
+ xqspi->rxbuf = (u8 *)op->data.buf.in;
+ xqspi->rx_bytes = op->data.nbytes;
+ xqspi->tx_bytes = op->data.nbytes;
+ }
+
+ zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true);
+ zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET,
+ ZYNQ_QSPI_IXR_RXTX_MASK);
+ if (!wait_for_completion_interruptible_timeout(&xqspi->data_completion,
+ msecs_to_jiffies(1000)))
+ err = -ETIMEDOUT;
+ }
+ zynq_qspi_chipselect(mem->spi, false);
+
+ return err;
+}
+
+static const struct spi_controller_mem_ops zynq_qspi_mem_ops = {
+ .supports_op = zynq_qspi_supports_op,
+ .exec_op = zynq_qspi_exec_mem_op,
+};
+
+/**
+ * zynq_qspi_probe - Probe method for the QSPI driver
+ * @pdev: Pointer to the platform_device structure
+ *
+ * This function initializes the driver data structures and the hardware.
+ *
+ * Return: 0 on success and error value on failure
+ */
+static int zynq_qspi_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct spi_controller *ctlr;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct zynq_qspi *xqspi;
+ struct resource *res;
+ u32 num_cs;
+
+ ctlr = spi_alloc_master(&pdev->dev, sizeof(*xqspi));
+ if (!ctlr)
+ return -ENOMEM;
+
+ xqspi = spi_controller_get_devdata(ctlr);
+ xqspi->dev = dev;
+ platform_set_drvdata(pdev, xqspi);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ xqspi->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(xqspi->regs)) {
+ ret = PTR_ERR(xqspi->regs);
+ goto remove_master;
+ }
+
+ xqspi->pclk = devm_clk_get(&pdev->dev, "pclk");
+ if (IS_ERR(xqspi->pclk)) {
+ dev_err(&pdev->dev, "pclk clock not found.\n");
+ ret = PTR_ERR(xqspi->pclk);
+ goto remove_master;
+ }
+
+ init_completion(&xqspi->data_completion);
+
+ xqspi->refclk = devm_clk_get(&pdev->dev, "ref_clk");
+ if (IS_ERR(xqspi->refclk)) {
+ dev_err(&pdev->dev, "ref_clk clock not found.\n");
+ ret = PTR_ERR(xqspi->refclk);
+ goto remove_master;
+ }
+
+ ret = clk_prepare_enable(xqspi->pclk);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to enable APB clock.\n");
+ goto remove_master;
+ }
+
+ ret = clk_prepare_enable(xqspi->refclk);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to enable device clock.\n");
+ goto clk_dis_pclk;
+ }
+
+ /* QSPI controller initializations */
+ zynq_qspi_init_hw(xqspi);
+
+ xqspi->irq = platform_get_irq(pdev, 0);
+ if (xqspi->irq <= 0) {
+ ret = -ENXIO;
+ dev_err(&pdev->dev, "irq resource not found\n");
+ goto remove_master;
+ }
+ ret = devm_request_irq(&pdev->dev, xqspi->irq, zynq_qspi_irq,
+ 0, pdev->name, xqspi);
+ if (ret != 0) {
+ ret = -ENXIO;
+ dev_err(&pdev->dev, "request_irq failed\n");
+ goto remove_master;
+ }
+
+ ret = of_property_read_u32(np, "num-cs",
+ &num_cs);
+ if (ret < 0)
+ ctlr->num_chipselect = ZYNQ_QSPI_DEFAULT_NUM_CS;
+ else
+ ctlr->num_chipselect = num_cs;
+
+ ctlr->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD |
+ SPI_TX_DUAL | SPI_TX_QUAD;
+ ctlr->mem_ops = &zynq_qspi_mem_ops;
+ ctlr->setup = zynq_qspi_setup_op;
+ ctlr->max_speed_hz = clk_get_rate(xqspi->refclk) / 2;
+ ctlr->dev.of_node = np;
+ ret = spi_register_controller(ctlr);
+ if (ret) {
+ dev_err(&pdev->dev, "spi_register_master failed\n");
+ goto clk_dis_all;
+ }
+
+ return ret;
+
+clk_dis_all:
+ clk_disable_unprepare(xqspi->refclk);
+clk_dis_pclk:
+ clk_disable_unprepare(xqspi->pclk);
+remove_master:
+ spi_controller_put(ctlr);
+
+ return ret;
+}
+
+/**
+ * zynq_qspi_remove - Remove method for the QSPI driver
+ * @pdev: Pointer to the platform_device structure
+ *
+ * This function is called if a device is physically removed from the system or
+ * if the driver module is being unloaded. It frees all resources allocated to
+ * the device.
+ *
+ * Return: 0 on success and error value on failure
+ */
+static int zynq_qspi_remove(struct platform_device *pdev)
+{
+ struct zynq_qspi *xqspi = platform_get_drvdata(pdev);
+
+ zynq_qspi_write(xqspi, ZYNQ_QSPI_ENABLE_OFFSET, 0);
+
+ clk_disable_unprepare(xqspi->refclk);
+ clk_disable_unprepare(xqspi->pclk);
+
+ return 0;
+}
+
+static const struct of_device_id zynq_qspi_of_match[] = {
+ { .compatible = "xlnx,zynq-qspi-1.0", },
+ { /* end of table */ }
+};
+
+MODULE_DEVICE_TABLE(of, zynq_qspi_of_match);
+
+/*
+ * zynq_qspi_driver - This structure defines the QSPI platform driver
+ */
+static struct platform_driver zynq_qspi_driver = {
+ .probe = zynq_qspi_probe,
+ .remove = zynq_qspi_remove,
+ .driver = {
+ .name = "zynq-qspi",
+ .of_match_table = zynq_qspi_of_match,
+ },
+};
+
+module_platform_driver(zynq_qspi_driver);
+
+MODULE_AUTHOR("Xilinx, Inc.");
+MODULE_DESCRIPTION("Xilinx Zynq QSPI driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 7b6494bd8a9b..5e75944ad5d1 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -36,6 +36,8 @@
#define CREATE_TRACE_POINTS
#include <trace/events/spi.h>
+EXPORT_TRACEPOINT_SYMBOL(spi_transfer_start);
+EXPORT_TRACEPOINT_SYMBOL(spi_transfer_stop);
#include "internals.h"
@@ -1179,10 +1181,10 @@ out:
if (msg->status && ctlr->handle_err)
ctlr->handle_err(ctlr, msg);
- spi_res_release(ctlr, msg);
-
spi_finalize_current_message(ctlr);
+ spi_res_release(ctlr, msg);
+
return ret;
}
@@ -2265,7 +2267,7 @@ int spi_register_controller(struct spi_controller *ctlr)
{
struct device *dev = ctlr->dev.parent;
struct boardinfo *bi;
- int status = -ENODEV;
+ int status;
int id, first_dynamic;
if (!dev)
@@ -2279,24 +2281,6 @@ int spi_register_controller(struct spi_controller *ctlr)
if (status)
return status;
- if (!spi_controller_is_slave(ctlr)) {
- if (ctlr->use_gpio_descriptors) {
- status = spi_get_gpio_descs(ctlr);
- if (status)
- return status;
- /*
- * A controller using GPIO descriptors always
- * supports SPI_CS_HIGH if need be.
- */
- ctlr->mode_bits |= SPI_CS_HIGH;
- } else {
- /* Legacy code path for GPIOs from DT */
- status = of_spi_register_master(ctlr);
- if (status)
- return status;
- }
- }
-
/* even if it's just one always-selected device, there must
* be at least one chipselect
*/
@@ -2353,6 +2337,25 @@ int spi_register_controller(struct spi_controller *ctlr)
* registration fails if the bus ID is in use.
*/
dev_set_name(&ctlr->dev, "spi%u", ctlr->bus_num);
+
+ if (!spi_controller_is_slave(ctlr)) {
+ if (ctlr->use_gpio_descriptors) {
+ status = spi_get_gpio_descs(ctlr);
+ if (status)
+ return status;
+ /*
+ * A controller using GPIO descriptors always
+ * supports SPI_CS_HIGH if need be.
+ */
+ ctlr->mode_bits |= SPI_CS_HIGH;
+ } else {
+ /* Legacy code path for GPIOs from DT */
+ status = of_spi_register_master(ctlr);
+ if (status)
+ return status;
+ }
+ }
+
status = device_add(&ctlr->dev);
if (status < 0) {
/* free bus id */
@@ -2785,11 +2788,6 @@ static int __spi_split_transfer_maxsize(struct spi_controller *ctlr,
size_t offset;
size_t count, i;
- /* warn once about this fact that we are splitting a transfer */
- dev_warn_once(&msg->spi->dev,
- "spi_transfer of length %i exceed max length of %zu - needed to split transfers\n",
- xfer->len, maxsize);
-
/* calculate how many we have to replace */
count = DIV_ROUND_UP(xfer->len, maxsize);
@@ -2947,6 +2945,11 @@ int spi_setup(struct spi_device *spi)
* so it is ignored here.
*/
bad_bits = spi->mode & ~(spi->controller->mode_bits | SPI_CS_WORD);
+ /* nothing prevents from working with active-high CS in case if it
+ * is driven by GPIO.
+ */
+ if (gpio_is_valid(spi->cs_gpio))
+ bad_bits &= ~SPI_CS_HIGH;
ugly_bits = bad_bits &
(SPI_TX_DUAL | SPI_TX_QUAD | SPI_TX_OCTAL |
SPI_RX_DUAL | SPI_RX_QUAD | SPI_RX_OCTAL);
@@ -2992,6 +2995,21 @@ int spi_setup(struct spi_device *spi)
}
EXPORT_SYMBOL_GPL(spi_setup);
+/**
+ * spi_set_cs_timing - configure CS setup, hold, and inactive delays
+ * @spi: the device that requires specific CS timing configuration
+ * @setup: CS setup time in terms of clock count
+ * @hold: CS hold time in terms of clock count
+ * @inactive_dly: CS inactive delay between transfers in terms of clock count
+ */
+void spi_set_cs_timing(struct spi_device *spi, u8 setup, u8 hold,
+ u8 inactive_dly)
+{
+ if (spi->controller->set_cs_timing)
+ spi->controller->set_cs_timing(spi, setup, hold, inactive_dly);
+}
+EXPORT_SYMBOL_GPL(spi_set_cs_timing);
+
static int __spi_validate(struct spi_device *spi, struct spi_message *message)
{
struct spi_controller *ctlr = spi->controller;
@@ -3066,8 +3084,6 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message)
if (!xfer->speed_hz)
xfer->speed_hz = spi->max_speed_hz;
- if (!xfer->speed_hz)
- xfer->speed_hz = ctlr->max_speed_hz;
if (ctlr->max_speed_hz && xfer->speed_hz > ctlr->max_speed_hz)
xfer->speed_hz = ctlr->max_speed_hz;
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index b0c76e2626ce..70966e10be7e 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -276,17 +276,19 @@ static int spidev_message(struct spidev_data *spidev,
k_tmp->bits_per_word = u_tmp->bits_per_word;
k_tmp->delay_usecs = u_tmp->delay_usecs;
k_tmp->speed_hz = u_tmp->speed_hz;
+ k_tmp->word_delay_usecs = u_tmp->word_delay_usecs;
if (!k_tmp->speed_hz)
k_tmp->speed_hz = spidev->speed_hz;
#ifdef VERBOSE
dev_dbg(&spidev->spi->dev,
- " xfer len %u %s%s%s%dbits %u usec %uHz\n",
+ " xfer len %u %s%s%s%dbits %u usec %u usec %uHz\n",
u_tmp->len,
u_tmp->rx_buf ? "rx " : "",
u_tmp->tx_buf ? "tx " : "",
u_tmp->cs_change ? "cs " : "",
u_tmp->bits_per_word ? : spidev->spi->bits_per_word,
u_tmp->delay_usecs,
+ u_tmp->word_delay_usecs,
u_tmp->speed_hz ? : spidev->spi->max_speed_hz);
#endif
spi_message_add_tail(k_tmp, &msg);
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 62951e836cbc..c7d7dc89deba 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -106,8 +106,6 @@ source "drivers/staging/mt7621-pci-phy/Kconfig"
source "drivers/staging/mt7621-pinctrl/Kconfig"
-source "drivers/staging/mt7621-spi/Kconfig"
-
source "drivers/staging/mt7621-dma/Kconfig"
source "drivers/staging/ralink-gdma/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index d1b17ddcd354..19c0a25ff98b 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -43,7 +43,6 @@ obj-$(CONFIG_PI433) += pi433/
obj-$(CONFIG_PCI_MT7621) += mt7621-pci/
obj-$(CONFIG_PCI_MT7621_PHY) += mt7621-pci-phy/
obj-$(CONFIG_PINCTRL_RT2880) += mt7621-pinctrl/
-obj-$(CONFIG_SPI_MT7621) += mt7621-spi/
obj-$(CONFIG_SOC_MT7621) += mt7621-dma/
obj-$(CONFIG_DMA_RALINK) += ralink-gdma/
obj-$(CONFIG_MTK_MMC) += mt7621-mmc/
diff --git a/drivers/staging/mt7621-spi/Kconfig b/drivers/staging/mt7621-spi/Kconfig
deleted file mode 100644
index 0b90f4cfa426..000000000000
--- a/drivers/staging/mt7621-spi/Kconfig
+++ /dev/null
@@ -1,6 +0,0 @@
-config SPI_MT7621
- tristate "MediaTek MT7621 SPI Controller"
- depends on RALINK
- help
- This selects a driver for the MediaTek MT7621 SPI Controller.
-
diff --git a/drivers/staging/mt7621-spi/Makefile b/drivers/staging/mt7621-spi/Makefile
deleted file mode 100644
index 3be508f63bac..000000000000
--- a/drivers/staging/mt7621-spi/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_SPI_MT7621) += spi-mt7621.o
diff --git a/drivers/staging/mt7621-spi/TODO b/drivers/staging/mt7621-spi/TODO
deleted file mode 100644
index fdbc5002c32a..000000000000
--- a/drivers/staging/mt7621-spi/TODO
+++ /dev/null
@@ -1,5 +0,0 @@
-
-- general code review and clean up
-- ensure device-tree requirements are documented
-
-Cc: NeilBrown <neil@brown.name>