Merge remote branch 'suspend/linux-next'

13 files changed, 365 insertions, 44 deletions

diff --git a/drivers/base/power/Makefile b/drivers/base/power/Makefile
index 89de75325cea..cbccf9a3cee4 100644
--- a/drivers/base/power/Makefile
+++ b/drivers/base/power/Makefile
@@ -1,5 +1,5 @@
 obj-$(CONFIG_PM)	+= sysfs.o
-obj-$(CONFIG_PM_SLEEP)	+= main.o
+obj-$(CONFIG_PM_SLEEP)	+= main.o wakeup.o
 obj-$(CONFIG_PM_RUNTIME)	+= runtime.o
 obj-$(CONFIG_PM_OPS)	+= generic_ops.o
 obj-$(CONFIG_PM_TRACE_RTC)	+= trace.o
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 941fcb87e52a..5419a49ff135 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -59,6 +59,7 @@ void device_pm_init(struct device *dev)
 {
 	dev->power.status = DPM_ON;
 	init_completion(&dev->power.completion);
+	dev->power.wakeup_count = 0;
 	pm_runtime_init(dev);
 }
 
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index a4c33bc51257..1eca50c8e7ca 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -73,6 +73,8 @@
  *	device are known to the PM core.  However, for some devices this
  *	attribute is set to "enabled" by bus type code or device drivers and in
  *	that cases it should be safe to leave the default value.
+ *
+ *	wakeup_count - Report the number of wakeup events related to the device
  */
 
 static const char enabled[] = "enabled";
@@ -108,6 +110,38 @@ static ssize_t control_store(struct device * dev, struct device_attribute *attr,
 }
 
 static DEVICE_ATTR(control, 0644, control_show, control_store);
+
+static ssize_t rtpm_status_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	const char *p;
+
+	if (dev->power.runtime_error) {
+		p = "error\n";
+	} else if (dev->power.disable_depth) {
+		p = "unsupported\n";
+	} else {
+		switch (dev->power.runtime_status) {
+		case RPM_SUSPENDED:
+			p = "suspended\n";
+			break;
+		case RPM_SUSPENDING:
+			p = "suspending\n";
+			break;
+		case RPM_RESUMING:
+			p = "resuming\n";
+			break;
+		case RPM_ACTIVE:
+			p = "active\n";
+			break;
+		default:
+			return -EIO;
+		}
+	}
+	return sprintf(buf, p);
+}
+
+static DEVICE_ATTR(runtime_status, 0444, rtpm_status_show, NULL);
 #endif
 
 static ssize_t
@@ -144,6 +178,16 @@ wake_store(struct device * dev, struct device_attribute *attr,
 
 static DEVICE_ATTR(wakeup, 0644, wake_show, wake_store);
 
+#ifdef CONFIG_PM_SLEEP
+static ssize_t wakeup_count_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%lu\n", dev->power.wakeup_count);
+}
+
+static DEVICE_ATTR(wakeup_count, 0444, wakeup_count_show, NULL);
+#endif
+
 #ifdef CONFIG_PM_ADVANCED_DEBUG
 #ifdef CONFIG_PM_RUNTIME
 
@@ -172,27 +216,8 @@ static ssize_t rtpm_enabled_show(struct device *dev,
 	return sprintf(buf, "enabled\n");
 }
 
-static ssize_t rtpm_status_show(struct device *dev,
-				struct device_attribute *attr, char *buf)
-{
-	if (dev->power.runtime_error)
-		return sprintf(buf, "error\n");
-	switch (dev->power.runtime_status) {
-	case RPM_SUSPENDED:
-		return sprintf(buf, "suspended\n");
-	case RPM_SUSPENDING:
-		return sprintf(buf, "suspending\n");
-	case RPM_RESUMING:
-		return sprintf(buf, "resuming\n");
-	case RPM_ACTIVE:
-		return sprintf(buf, "active\n");
-	}
-	return -EIO;
-}
-
 static DEVICE_ATTR(runtime_usage, 0444, rtpm_usagecount_show, NULL);
 static DEVICE_ATTR(runtime_active_kids, 0444, rtpm_children_show, NULL);
-static DEVICE_ATTR(runtime_status, 0444, rtpm_status_show, NULL);
 static DEVICE_ATTR(runtime_enabled, 0444, rtpm_enabled_show, NULL);
 
 #endif
@@ -228,14 +253,17 @@ static DEVICE_ATTR(async, 0644, async_show, async_store);
 static struct attribute * power_attrs[] = {
 #ifdef CONFIG_PM_RUNTIME
 	&dev_attr_control.attr,
+	&dev_attr_runtime_status.attr,
 #endif
 	&dev_attr_wakeup.attr,
+#ifdef CONFIG_PM_SLEEP
+	&dev_attr_wakeup_count.attr,
+#endif
 #ifdef CONFIG_PM_ADVANCED_DEBUG
 	&dev_attr_async.attr,
 #ifdef CONFIG_PM_RUNTIME
 	&dev_attr_runtime_usage.attr,
 	&dev_attr_runtime_active_kids.attr,
-	&dev_attr_runtime_status.attr,
 	&dev_attr_runtime_enabled.attr,
 #endif
 #endif
diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c
new file mode 100644
index 000000000000..eb594facfc3f
--- /dev/null
+++ b/drivers/base/power/wakeup.c
@@ -0,0 +1,247 @@
+/*
+ * drivers/base/power/wakeup.c - System wakeup events framework
+ *
+ * Copyright (c) 2010 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/capability.h>
+#include <linux/suspend.h>
+#include <linux/pm.h>
+
+/*
+ * If set, the suspend/hibernate code will abort transitions to a sleep state
+ * if wakeup events are registered during or immediately before the transition.
+ */
+bool events_check_enabled;
+
+/* The counter of registered wakeup events. */
+static unsigned long event_count;
+/* A preserved old value of event_count. */
+static unsigned long saved_event_count;
+/* The counter of wakeup events being processed. */
+static unsigned long events_in_progress;
+
+static DEFINE_SPINLOCK(events_lock);
+
+static void pm_wakeup_timer_fn(unsigned long data);
+
+static DEFINE_TIMER(events_timer, pm_wakeup_timer_fn, 0, 0);
+static unsigned long events_timer_expires;
+
+/*
+ * The functions below use the observation that each wakeup event starts a
+ * period in which the system should not be suspended.  The moment this period
+ * will end depends on how the wakeup event is going to be processed after being
+ * detected and all of the possible cases can be divided into two distinct
+ * groups.
+ *
+ * First, a wakeup event may be detected by the same functional unit that will
+ * carry out the entire processing of it and possibly will pass it to user space
+ * for further processing.  In that case the functional unit that has detected
+ * the event may later "close" the "no suspend" period associated with it
+ * directly as soon as it has been dealt with.  The pair of pm_stay_awake() and
+ * pm_relax(), balanced with each other, is supposed to be used in such
+ * situations.
+ *
+ * Second, a wakeup event may be detected by one functional unit and processed
+ * by another one.  In that case the unit that has detected it cannot really
+ * "close" the "no suspend" period associated with it, unless it knows in
+ * advance what's going to happen to the event during processing.  This
+ * knowledge, however, may not be available to it, so it can simply specify time
+ * to wait before the system can be suspended and pass it as the second
+ * argument of pm_wakeup_event().
+ */
+
+/**
+ * pm_stay_awake - Notify the PM core that a wakeup event is being processed.
+ * @dev: Device the wakeup event is related to.
+ *
+ * Notify the PM core of a wakeup event (signaled by @dev) by incrementing the
+ * counter of wakeup events being processed.  If @dev is not NULL, the counter
+ * of wakeup events related to @dev is incremented too.
+ *
+ * Call this function after detecting of a wakeup event if pm_relax() is going
+ * to be called directly after processing the event (and possibly passing it to
+ * user space for further processing).
+ *
+ * It is safe to call this function from interrupt context.
+ */
+void pm_stay_awake(struct device *dev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&events_lock, flags);
+	if (dev)
+		dev->power.wakeup_count++;
+
+	events_in_progress++;
+	spin_unlock_irqrestore(&events_lock, flags);
+}
+
+/**
+ * pm_relax - Notify the PM core that processing of a wakeup event has ended.
+ *
+ * Notify the PM core that a wakeup event has been processed by decrementing
+ * the counter of wakeup events being processed and incrementing the counter
+ * of registered wakeup events.
+ *
+ * Call this function for wakeup events whose processing started with calling
+ * pm_stay_awake().
+ *
+ * It is safe to call it from interrupt context.
+ */
+void pm_relax(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&events_lock, flags);
+	if (events_in_progress) {
+		events_in_progress--;
+		event_count++;
+	}
+	spin_unlock_irqrestore(&events_lock, flags);
+}
+
+/**
+ * pm_wakeup_timer_fn - Delayed finalization of a wakeup event.
+ *
+ * Decrease the counter of wakeup events being processed after it was increased
+ * by pm_wakeup_event().
+ */
+static void pm_wakeup_timer_fn(unsigned long data)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&events_lock, flags);
+	if (events_timer_expires
+	    && time_before_eq(events_timer_expires, jiffies)) {
+		events_in_progress--;
+		events_timer_expires = 0;
+	}
+	spin_unlock_irqrestore(&events_lock, flags);
+}
+
+/**
+ * pm_wakeup_event - Notify the PM core of a wakeup event.
+ * @dev: Device the wakeup event is related to.
+ * @msec: Anticipated event processing time (in milliseconds).
+ *
+ * Notify the PM core of a wakeup event (signaled by @dev) that will take
+ * approximately @msec milliseconds to be processed by the kernel.  Increment
+ * the counter of registered wakeup events and (if @msec is nonzero) set up
+ * the wakeup events timer to execute pm_wakeup_timer_fn() in future (if the
+ * timer has not been set up already, increment the counter of wakeup events
+ * being processed).  If @dev is not NULL, the counter of wakeup events related
+ * to @dev is incremented too.
+ *
+ * It is safe to call this function from interrupt context.
+ */
+void pm_wakeup_event(struct device *dev, unsigned int msec)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&events_lock, flags);
+	event_count++;
+	if (dev)
+		dev->power.wakeup_count++;
+
+	if (msec) {
+		unsigned long expires;
+
+		expires = jiffies + msecs_to_jiffies(msec);
+		if (!expires)
+			expires = 1;
+
+		if (!events_timer_expires
+		    || time_after(expires, events_timer_expires)) {
+			if (!events_timer_expires)
+				events_in_progress++;
+
+			mod_timer(&events_timer, expires);
+			events_timer_expires = expires;
+		}
+	}
+	spin_unlock_irqrestore(&events_lock, flags);
+}
+
+/**
+ * pm_check_wakeup_events - Check for new wakeup events.
+ *
+ * Compare the current number of registered wakeup events with its preserved
+ * value from the past to check if new wakeup events have been registered since
+ * the old value was stored.  Check if the current number of wakeup events being
+ * processed is zero.
+ */
+bool pm_check_wakeup_events(void)
+{
+	unsigned long flags;
+	bool ret = true;
+
+	spin_lock_irqsave(&events_lock, flags);
+	if (events_check_enabled) {
+		ret = (event_count == saved_event_count) && !events_in_progress;
+		events_check_enabled = ret;
+	}
+	spin_unlock_irqrestore(&events_lock, flags);
+	return ret;
+}
+
+/**
+ * pm_get_wakeup_count - Read the number of registered wakeup events.
+ * @count: Address to store the value at.
+ *
+ * Store the number of registered wakeup events at the address in @count.  Block
+ * if the current number of wakeup events being processed is nonzero.
+ *
+ * Return false if the wait for the number of wakeup events being processed to
+ * drop down to zero has been interrupted by a signal (and the current number
+ * of wakeup events being processed is still nonzero).  Otherwise return true.
+ */
+bool pm_get_wakeup_count(unsigned long *count)
+{
+	bool ret;
+
+	spin_lock_irq(&events_lock);
+	if (capable(CAP_SYS_ADMIN))
+		events_check_enabled = false;
+
+	while (events_in_progress && !signal_pending(current)) {
+		spin_unlock_irq(&events_lock);
+
+		schedule_timeout_interruptible(msecs_to_jiffies(100));
+
+		spin_lock_irq(&events_lock);
+	}
+	*count = event_count;
+	ret = !events_in_progress;
+	spin_unlock_irq(&events_lock);
+	return ret;
+}
+
+/**
+ * pm_save_wakeup_count - Save the current number of registered wakeup events.
+ * @count: Value to compare with the current number of registered wakeup events.
+ *
+ * If @count is equal to the current number of registered wakeup events and the
+ * current number of wakeup events being processed is zero, store @count as the
+ * old number of registered wakeup events to be used by pm_check_wakeup_events()
+ * and return true.  Otherwise return false.
+ */
+bool pm_save_wakeup_count(unsigned long count)
+{
+	bool ret = false;
+
+	spin_lock_irq(&events_lock);
+	if (count == event_count && !events_in_progress) {
+		saved_event_count = count;
+		events_check_enabled = true;
+		ret = true;
+	}
+	spin_unlock_irq(&events_lock);
+	return ret;
+}
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 20c5ecf77549..8ba366a21dbc 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -2918,10 +2918,10 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
 			 * dropped transactions.
 			 */
 			pm_qos_update_request(
-				adapter->netdev->pm_qos_req, 55);
+				&adapter->netdev->pm_qos_req, 55);
 		} else {
 			pm_qos_update_request(
-				adapter->netdev->pm_qos_req,
+				&adapter->netdev->pm_qos_req,
 				PM_QOS_DEFAULT_VALUE);
 		}
 	}
@@ -3220,9 +3220,9 @@ int e1000e_up(struct e1000_adapter *adapter)
 
 	/* DMA latency requirement to workaround early-receive/jumbo issue */
 	if (adapter->flags & FLAG_HAS_ERT)
-		adapter->netdev->pm_qos_req =
-			pm_qos_add_request(PM_QOS_CPU_DMA_LATENCY,
-				       PM_QOS_DEFAULT_VALUE);
+		pm_qos_add_request(&adapter->netdev->pm_qos_req,
+				   PM_QOS_CPU_DMA_LATENCY,
+				   PM_QOS_DEFAULT_VALUE);
 
 	/* hardware has been reset, we need to reload some things */
 	e1000_configure(adapter);
@@ -3287,11 +3287,8 @@ void e1000e_down(struct e1000_adapter *adapter)
 	e1000_clean_tx_ring(adapter);
 	e1000_clean_rx_ring(adapter);
 
-	if (adapter->flags & FLAG_HAS_ERT) {
-		pm_qos_remove_request(
-			      adapter->netdev->pm_qos_req);
-		adapter->netdev->pm_qos_req = NULL;
-	}
+	if (adapter->flags & FLAG_HAS_ERT)
+		pm_qos_remove_request(&adapter->netdev->pm_qos_req);
 
 	/*
 	 * TODO: for power management, we could drop the link and
diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c
index 5e2b2a8c56c6..add6197d3bcb 100644
--- a/drivers/net/igbvf/netdev.c
+++ b/drivers/net/igbvf/netdev.c
@@ -48,7 +48,7 @@
 #define DRV_VERSION "1.0.0-k0"
 char igbvf_driver_name[] = "igbvf";
 const char igbvf_driver_version[] = DRV_VERSION;
-struct pm_qos_request_list *igbvf_driver_pm_qos_req;
+static struct pm_qos_request_list igbvf_driver_pm_qos_req;
 static const char igbvf_driver_string[] =
 				"Intel(R) Virtual Function Network Driver";
 static const char igbvf_copyright[] = "Copyright (c) 2009 Intel Corporation.";
@@ -2902,8 +2902,8 @@ static int __init igbvf_init_module(void)
 	printk(KERN_INFO "%s\n", igbvf_copyright);
 
 	ret = pci_register_driver(&igbvf_driver);
-	igbvf_driver_pm_qos_req = pm_qos_add_request(PM_QOS_CPU_DMA_LATENCY,
-	                       PM_QOS_DEFAULT_VALUE);
+	pm_qos_add_request(&igbvf_driver_pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
+			   PM_QOS_DEFAULT_VALUE);
 
 	return ret;
 }
@@ -2918,8 +2918,7 @@ module_init(igbvf_init_module);
 static void __exit igbvf_exit_module(void)
 {
 	pci_unregister_driver(&igbvf_driver);
-	pm_qos_remove_request(igbvf_driver_pm_qos_req);
-	igbvf_driver_pm_qos_req = NULL;
+	pm_qos_remove_request(&igbvf_driver_pm_qos_req);
 }
 module_exit(igbvf_exit_module);
 
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 56350d571960..bcde7688dda2 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -174,7 +174,7 @@ that only one external action is invoked at a time.
 #define DRV_DESCRIPTION	"Intel(R) PRO/Wireless 2100 Network Driver"
 #define DRV_COPYRIGHT	"Copyright(c) 2003-2006 Intel Corporation"
 
-struct pm_qos_request_list *ipw2100_pm_qos_req;
+struct pm_qos_request_list ipw2100_pm_qos_req;
 
 /* Debugging stuff */
 #ifdef CONFIG_IPW2100_DEBUG
@@ -1741,7 +1741,7 @@ static int ipw2100_up(struct ipw2100_priv *priv, int deferred)
 	/* the ipw2100 hardware really doesn't want power management delays
 	 * longer than 175usec
 	 */
-	pm_qos_update_request(ipw2100_pm_qos_req, 175);
+	pm_qos_update_request(&ipw2100_pm_qos_req, 175);
 
 	/* If the interrupt is enabled, turn it off... */
 	spin_lock_irqsave(&priv->low_lock, flags);
@@ -1889,7 +1889,7 @@ static void ipw2100_down(struct ipw2100_priv *priv)
 	ipw2100_disable_interrupts(priv);
 	spin_unlock_irqrestore(&priv->low_lock, flags);
 
-	pm_qos_update_request(ipw2100_pm_qos_req, PM_QOS_DEFAULT_VALUE);
+	pm_qos_update_request(&ipw2100_pm_qos_req, PM_QOS_DEFAULT_VALUE);
 
 	/* We have to signal any supplicant if we are disassociating */
 	if (associated)
@@ -6665,8 +6665,8 @@ static int __init ipw2100_init(void)
 	if (ret)
 		goto out;
 
-	ipw2100_pm_qos_req = pm_qos_add_request(PM_QOS_CPU_DMA_LATENCY,
-			PM_QOS_DEFAULT_VALUE);
+	pm_qos_add_request(&ipw2100_pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
+			   PM_QOS_DEFAULT_VALUE);
 #ifdef CONFIG_IPW2100_DEBUG
 	ipw2100_debug_level = debug;
 	ret = driver_create_file(&ipw2100_pci_driver.driver,
@@ -6688,7 +6688,7 @@ static void __exit ipw2100_exit(void)
 			   &driver_attr_debug_level);
 #endif
 	pci_unregister_driver(&ipw2100_pci_driver);
-	pm_qos_remove_request(ipw2100_pm_qos_req);
+	pm_qos_remove_request(&ipw2100_pm_qos_req);
 }
 
 module_init(ipw2100_init);
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 5342e037e37f..24e19c594e57 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -48,6 +48,7 @@ static void pci_acpi_wake_dev(acpi_handle handle, u32 event, void *context)
 	if (event == ACPI_NOTIFY_DEVICE_WAKE && pci_dev) {
 		pci_check_pme_status(pci_dev);
 		pm_runtime_resume(&pci_dev->dev);
+		pci_wakeup_event(pci_dev);
 		if (pci_dev->subordinate)
 			pci_pme_wakeup_bus(pci_dev->subordinate);
 	}
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 740fb4ea9669..130ed1daf0f8 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1275,6 +1275,22 @@ bool pci_check_pme_status(struct pci_dev *dev)
 	return ret;
 }
 
+/*
+ * Time to wait before the system can be put into a sleep state after reporting
+ * a wakeup event signaled by a PCI device.
+ */
+#define PCI_WAKEUP_COOLDOWN	100
+
+/**
+ * pci_wakeup_event - Report a wakeup event related to a given PCI device.
+ * @dev: Device to report the wakeup event for.
+ */
+void pci_wakeup_event(struct pci_dev *dev)
+{
+	if (device_may_wakeup(&dev->dev))
+		pm_wakeup_event(&dev->dev, PCI_WAKEUP_COOLDOWN);
+}
+
 /**
  * pci_pme_wakeup - Wake up a PCI device if its PME Status bit is set.
  * @dev: Device to handle.
@@ -1285,8 +1301,10 @@ bool pci_check_pme_status(struct pci_dev *dev)
  */
 static int pci_pme_wakeup(struct pci_dev *dev, void *ign)
 {
-	if (pci_check_pme_status(dev))
+	if (pci_check_pme_status(dev)) {
 		pm_request_resume(&dev->dev);
+		pci_wakeup_event(dev);
+	}
 	return 0;
 }
 
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index f8077b3c8c8c..c8b7fd056ccd 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -56,6 +56,7 @@ extern void pci_update_current_state(struct pci_dev *dev, pci_power_t state);
 extern void pci_disable_enabled_device(struct pci_dev *dev);
 extern bool pci_check_pme_status(struct pci_dev *dev);
 extern int pci_finish_runtime_suspend(struct pci_dev *dev);
+extern void pci_wakeup_event(struct pci_dev *dev);
 extern int __pci_pme_wakeup(struct pci_dev *dev, void *ign);
 extern void pci_pme_wakeup_bus(struct pci_bus *bus);
 extern void pci_pm_init(struct pci_dev *dev);
diff --git a/drivers/pci/pcie/pme/pcie_pme.c b/drivers/pci/pcie/pme/pcie_pme.c
index d672a0a63816..bbdea18693d9 100644
--- a/drivers/pci/pcie/pme/pcie_pme.c
+++ b/drivers/pci/pcie/pme/pcie_pme.c
@@ -154,6 +154,7 @@ static bool pcie_pme_walk_bus(struct pci_bus *bus)
 		/* Skip PCIe devices in case we started from a root port. */
 		if (!pci_is_pcie(dev) && pci_check_pme_status(dev)) {
 			pm_request_resume(&dev->dev);
+			pci_wakeup_event(dev);
 			ret = true;
 		}
 
@@ -254,8 +255,10 @@ static void pcie_pme_handle_request(struct pci_dev *port, u16 req_id)
 	if (found) {
 		/* The device is there, but we have to check its PME status. */
 		found = pci_check_pme_status(dev);
-		if (found)
+		if (found) {
 			pm_request_resume(&dev->dev);
+			pci_wakeup_event(dev);
+		}
 		pci_dev_put(dev);
 	} else if (devfn) {
 		/*
diff --git a/drivers/pnp/core.c b/drivers/pnp/core.c
index 5dba90995d9e..88b3cde52596 100644
--- a/drivers/pnp/core.c
+++ b/drivers/pnp/core.c
@@ -164,6 +164,9 @@ int __pnp_add_device(struct pnp_dev *dev)
 	list_add_tail(&dev->global_list, &pnp_global);
 	list_add_tail(&dev->protocol_list, &dev->protocol->devices);
 	spin_unlock(&pnp_lock);
+	if (dev->protocol->can_wakeup)
+		device_set_wakeup_capable(&dev->dev,
+				dev->protocol->can_wakeup(dev));
 	return device_register(&dev->dev);
 }
 
diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c
index f7ff628b7d94..dc4e32e031e9 100644
--- a/drivers/pnp/pnpacpi/core.c
+++ b/drivers/pnp/pnpacpi/core.c
@@ -122,17 +122,37 @@ static int pnpacpi_disable_resources(struct pnp_dev *dev)
 }
 
 #ifdef CONFIG_ACPI_SLEEP
+static bool pnpacpi_can_wakeup(struct pnp_dev *dev)
+{
+	struct acpi_device *acpi_dev = dev->data;
+	acpi_handle handle = acpi_dev->handle;
+
+	return acpi_bus_can_wakeup(handle);
+}
+
 static int pnpacpi_suspend(struct pnp_dev *dev, pm_message_t state)
 {
 	struct acpi_device *acpi_dev = dev->data;
 	acpi_handle handle = acpi_dev->handle;
 	int power_state;
 
+	if (device_can_wakeup(&dev->dev)) {
+		int rc = acpi_pm_device_sleep_wake(&dev->dev,
+				device_may_wakeup(&dev->dev));
+
+		if (rc)
+			return rc;
+	}
 	power_state = acpi_pm_device_sleep_state(&dev->dev, NULL);
 	if (power_state < 0)
 		power_state = (state.event == PM_EVENT_ON) ?
 				ACPI_STATE_D0 : ACPI_STATE_D3;
 
+	/* acpi_bus_set_power() often fails (keyboard port can't be
+	 * powered-down?), and in any case, our return value is ignored
+	 * by pnp_bus_suspend().  Hence we don't revert the wakeup
+	 * setting if the set_power fails.
+	 */
 	return acpi_bus_set_power(handle, power_state);
 }
 
@@ -141,6 +161,8 @@ static int pnpacpi_resume(struct pnp_dev *dev)
 	struct acpi_device *acpi_dev = dev->data;
 	acpi_handle handle = acpi_dev->handle;
 
+	if (device_may_wakeup(&dev->dev))
+		acpi_pm_device_sleep_wake(&dev->dev, false);
 	return acpi_bus_set_power(handle, ACPI_STATE_D0);
 }
 #endif
@@ -151,6 +173,7 @@ struct pnp_protocol pnpacpi_protocol = {
 	.set	 = pnpacpi_set_resources,
 	.disable = pnpacpi_disable_resources,
 #ifdef CONFIG_ACPI_SLEEP
+	.can_wakeup = pnpacpi_can_wakeup,
 	.suspend = pnpacpi_suspend,
 	.resume = pnpacpi_resume,
 #endif