summaryrefslogtreecommitdiff
path: root/include/asm-m32r
diff options
context:
space:
mode:
authorHirokazu Takata <takata@linux-m32r.org>2005-06-21 17:16:10 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-06-21 19:07:30 -0700
commit2368086344c3d67b0f4aecac39d620fb9b8795c3 (patch)
treeaa55003e311abf6049acd23f5ff7f8bfd24eca4c /include/asm-m32r
parentd4c477ca5448f19afaaf6c0cfd655009ea9e614d (diff)
[PATCH] m32r: Support M3A-2170(Mappi-III) platform
This patchset is for supporting a new m32r platform, M3A-2170(Mappi-III) evaluation board. An M32R chip multiprocessor is equipped on the board. http://http://www.linux-m32r.org/eng/platform/platform.html * arch/m32r/Kconfig: Support Mappi-III platform. * arch/m32r/kernel/Makefile: ditto. * arch/m32r/kernel/io_mappi3.c: ditto. * arch/m32r/kernel/setup.c: ditto. * arch/m32r/kernel/setup_mappi3.c: ditto. * include/asm-m32r/m32102.h: ditto. * include/asm-m32r/m32r.h: ditto. * include/asm-m32r/mappi3/mappi3_pld.h: ditto. * include/asm-m32r/ide.h: CF support for Mappi-III. * arch/m32r/kernel/setup_mappi3.c: ditto. * arch/m32r/mappi3/defconfig.smp: A default config file for Mappi-III. * arch/m32r/mappi3/dot.gdbinit: A default .gdbinit file for Mappi-III. * arch/m32r/boot/compressed/m32r_sio.c: Modified for Mappi-III - At boot time, m32r-g00ff bootloader makes MMU off for Mappi-III, on the contrary it makes MMU on for Mappi-II. * arch/m32r/kernel/io_mappi2.c: Update comments. * arch/m32r/kernel/setup_mappi2.c: ditto. Signed-off-by: Mamoru Sakugawa <sakugawa@linux-m32r.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'include/asm-m32r')
-rw-r--r--include/asm-m32r/ide.h2
-rw-r--r--include/asm-m32r/m32102.h1
-rw-r--r--include/asm-m32r/m32r.h4
-rw-r--r--include/asm-m32r/mappi3/mappi3_pld.h143
4 files changed, 149 insertions, 1 deletions
diff --git a/include/asm-m32r/ide.h b/include/asm-m32r/ide.h
index be64f24e37ee..194393bd8beb 100644
--- a/include/asm-m32r/ide.h
+++ b/include/asm-m32r/ide.h
@@ -35,7 +35,7 @@
static __inline__ int ide_default_irq(unsigned long base)
{
switch (base) {
-#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2)
+#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) || defined(CONFIG_PLAT_MAPPI3)
case 0x1f0: return PLD_IRQ_CFIREQ;
default:
return 0;
diff --git a/include/asm-m32r/m32102.h b/include/asm-m32r/m32102.h
index b56034026bf8..cb98101f4f6e 100644
--- a/include/asm-m32r/m32102.h
+++ b/include/asm-m32r/m32102.h
@@ -175,6 +175,7 @@
#define M32R_ICU_CR5_PORTL (0x210+M32R_ICU_OFFSET) /* INT4 */
#define M32R_ICU_CR6_PORTL (0x214+M32R_ICU_OFFSET) /* INT5 */
#define M32R_ICU_CR7_PORTL (0x218+M32R_ICU_OFFSET) /* INT6 */
+#define M32R_ICU_CR8_PORTL (0x219+M32R_ICU_OFFSET) /* INT7 */
#define M32R_ICU_CR16_PORTL (0x23C+M32R_ICU_OFFSET) /* MFT0 */
#define M32R_ICU_CR17_PORTL (0x240+M32R_ICU_OFFSET) /* MFT1 */
#define M32R_ICU_CR18_PORTL (0x244+M32R_ICU_OFFSET) /* MFT2 */
diff --git a/include/asm-m32r/m32r.h b/include/asm-m32r/m32r.h
index f116649bbef3..fd2b2823762b 100644
--- a/include/asm-m32r/m32r.h
+++ b/include/asm-m32r/m32r.h
@@ -36,6 +36,10 @@
#include <asm/mappi2/mappi2_pld.h>
#endif /* CONFIG_PLAT_MAPPI2 */
+#if defined(CONFIG_PLAT_MAPPI3)
+#include <asm/mappi3/mappi3_pld.h>
+#endif /* CONFIG_PLAT_MAPPI3 */
+
#if defined(CONFIG_PLAT_USRV)
#include <asm/m32700ut/m32700ut_pld.h>
#endif
diff --git a/include/asm-m32r/mappi3/mappi3_pld.h b/include/asm-m32r/mappi3/mappi3_pld.h
new file mode 100644
index 000000000000..3f1551f7f01f
--- /dev/null
+++ b/include/asm-m32r/mappi3/mappi3_pld.h
@@ -0,0 +1,143 @@
+/*
+ * include/asm/mappi3/mappi3_pld.h
+ *
+ * Definitions for Extended IO Logic on MAPPI3 board.
+ * based on m32700ut_pld.h
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of
+ * this archive for more details.
+ *
+ */
+
+#ifndef _MAPPI3_PLD_H
+#define _MAPPI3_PLD_H
+
+#ifndef __ASSEMBLY__
+/* FIXME:
+ * Some C functions use non-cache address, so can't define non-cache address.
+ */
+#define PLD_BASE (0x1c000000 /* + NONCACHE_OFFSET */)
+#define __reg8 (volatile unsigned char *)
+#define __reg16 (volatile unsigned short *)
+#define __reg32 (volatile unsigned int *)
+#else
+#define PLD_BASE (0x1c000000 + NONCACHE_OFFSET)
+#define __reg8
+#define __reg16
+#define __reg32
+#endif /* __ASSEMBLY__ */
+
+/* CFC */
+#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000)
+#define PLD_CFSTS __reg16(PLD_BASE + 0x0002)
+#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004)
+#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006)
+#define PLD_CFCR0 __reg16(PLD_BASE + 0x000a)
+#define PLD_CFCR1 __reg16(PLD_BASE + 0x000c)
+
+/* MMC */
+#define PLD_MMCCR __reg16(PLD_BASE + 0x4000)
+#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002)
+#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006)
+#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a)
+#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c)
+#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e)
+#define PLD_MMCDET __reg16(PLD_BASE + 0x4010)
+#define PLD_MMCWP __reg16(PLD_BASE + 0x4012)
+#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000)
+#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000)
+#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000)
+#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006)
+
+/* Power Control of MMC and CF */
+#define PLD_CPCR __reg16(PLD_BASE + 0x14000)
+
+
+/*==== ICU ====*/
+#define M32R_IRQ_PC104 (5) /* INT4(PC/104) */
+#define M32R_IRQ_I2C (28) /* I2C-BUS */
+#define PLD_IRQ_CFIREQ (6) /* INT5 CFC Card Interrupt */
+#define PLD_IRQ_CFC_INSERT (7) /* INT6 CFC Card Insert */
+#define PLD_IRQ_CFC_EJECT (8) /* INT7 CFC Card Eject */
+#define PLD_IRQ_MMCCARD (43) /* MMC Card Insert */
+#define PLD_IRQ_MMCIRQ (44) /* MMC Transfer Done */
+
+
+#if 0
+/* LED Control
+ *
+ * 1: DIP swich side
+ * 2: Reset switch side
+ */
+#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002)
+#define PLD_IOLED_1_ON 0x001
+#define PLD_IOLED_1_OFF 0x000
+#define PLD_IOLED_2_ON 0x002
+#define PLD_IOLED_2_OFF 0x000
+
+/* DIP Switch
+ * 0: Write-protect of Flash Memory (0:protected, 1:non-protected)
+ * 1: -
+ * 2: -
+ * 3: -
+ */
+#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004)
+#define PLD_IOSWSTS_IOSW2 0x0200
+#define PLD_IOSWSTS_IOSW1 0x0100
+#define PLD_IOSWSTS_IOWP0 0x0001
+
+#endif
+
+/* CRC */
+#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000)
+#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002)
+#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004)
+#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006)
+#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008)
+#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a)
+
+
+#if 0
+/* RTC */
+#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000)
+#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002)
+#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004)
+#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006)
+#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008)
+
+/* SIO0 */
+#define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000)
+#define PLD_ESIO0CR_TXEN 0x0001
+#define PLD_ESIO0CR_RXEN 0x0002
+#define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002)
+#define PLD_ESIO0MOD0_CTSS 0x0040
+#define PLD_ESIO0MOD0_RTSS 0x0080
+#define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004)
+#define PLD_ESIO0MOD1_LMFS 0x0010
+#define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006)
+#define PLD_ESIO0STS_TEMP 0x0001
+#define PLD_ESIO0STS_TXCP 0x0002
+#define PLD_ESIO0STS_RXCP 0x0004
+#define PLD_ESIO0STS_TXSC 0x0100
+#define PLD_ESIO0STS_RXSC 0x0200
+#define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP)
+#define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008)
+#define PLD_ESIO0INTCR_TXIEN 0x0002
+#define PLD_ESIO0INTCR_RXCEN 0x0004
+#define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a)
+#define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c)
+#define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e)
+
+/* SIM Card */
+#define PLD_SCCR __reg16(PLD_BASE + 0x38000)
+#define PLD_SCMOD __reg16(PLD_BASE + 0x38004)
+#define PLD_SCSTS __reg16(PLD_BASE + 0x38006)
+#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008)
+#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a)
+#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c)
+#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e)
+
+#endif
+
+#endif /* _MAPPI3_PLD.H */