Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Wrap datapath globals into net_aligned_data, to avoid false sharing

   - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

   - Add SO_INQ and SCM_INQ support to AF_UNIX

   - Add SIOCINQ support to AF_VSOCK

   - Add TCP_MAXSEG sockopt to MPTCP

   - Add IPv6 force_forwarding sysctl to enable forwarding per interface

   - Make TCP validation of whether packet fully fits in the receive
     window and the rcv_buf more strict. With increased use of HW
     aggregation a single "packet" can be multiple 100s of kB

   - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
     improves latency up to 33% for sockmap users

   - Convert TCP send queue handling from tasklet to BH workque

   - Improve BPF iteration over TCP sockets to see each socket exactly
     once

   - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

   - Support enabling kernel threads for NAPI processing on per-NAPI
     instance basis rather than a whole device. Fully stop the kernel
     NAPI thread when threaded NAPI gets disabled. Previously thread
     would stick around until ifdown due to tricky synchronization

   - Allow multicast routing to take effect on locally-generated packets

   - Add output interface argument for End.X in segment routing

   - MCTP: add support for gateway routing, improve bind() handling

   - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

   - Add a new neighbor flag ("extern_valid"), which cedes refresh
     responsibilities to userspace. This is needed for EVPN multi-homing
     where a neighbor entry for a multi-homed host needs to be synced
     across all the VTEPs among which the host is multi-homed

   - Support NUD_PERMANENT for proxy neighbor entries

   - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

   - Add sequence numbers to netconsole messages. Unregister
     netconsole's console when all net targets are removed. Code
     refactoring. Add a number of selftests

   - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
     should be used for an inbound SA lookup

   - Support inspecting ref_tracker state via DebugFS

   - Don't force bonding advertisement frames tx to ~333 ms boundaries.
     Add broadcast_neighbor option to send ARP/ND on all bonded links

   - Allow providing upcall pid for the 'execute' command in openvswitch

   - Remove DCCP support from Netfilter's conntrack

   - Disallow multiple packet duplications in the queuing layer

   - Prevent use of deprecated iptables code on PREEMPT_RT

  Driver API:

   - Support RSS and hashing configuration over ethtool Netlink

   - Add dedicated ethtool callbacks for getting and setting hashing
     fields

   - Add support for power budget evaluation strategy in PSE /
     Power-over-Ethernet. Generate Netlink events for overcurrent etc

   - Support DPLL phase offset monitoring across all device inputs.
     Support providing clock reference and SYNC over separate DPLL
     inputs

   - Support traffic classes in devlink rate API for bandwidth
     management

   - Remove rtnl_lock dependency from UDP tunnel port configuration

  Device drivers:

   - Add a new Broadcom driver for 800G Ethernet (bnge)

   - Add a standalone driver for Microchip ZL3073x DPLL

   - Remove IBM's NETIUCV device driver

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support zero-copy Tx of DMABUF memory
         - take page size into account for page pool recycling rings
      - Intel (100G, ice, idpf):
         - idpf: XDP and AF_XDP support preparations
         - idpf: add flow steering
         - add link_down_events statistic
         - clean up the TSPLL code
         - preparations for live VM migration
      - nVidia/Mellanox:
         - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
         - optimize context memory usage for matchers
         - expose serial numbers in devlink info
         - support PCIe congestion metrics
      - Meta (fbnic):
         - add 25G, 50G, and 100G link modes to phylink
         - support dumping FW logs
      - Marvell/Cavium:
         - support for CN20K generation of the Octeon chips
      - Amazon:
         - add HW clock (without timestamping, just hypervisor time access)

   - Ethernet virtual:
      - VirtIO net:
         - support segmentation of UDP-tunnel-encapsulated packets
      - Google (gve):
         - support packet timestamping and clock synchronization
      - Microsoft vNIC:
         - add handler for device-originated servicing events
         - allow dynamic MSI-X vector allocation
         - support Tx bandwidth clamping

   - Ethernet NICs consumer, and embedded:
      - AMD:
         - amd-xgbe: hardware timestamping and PTP clock support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - use napi_complete_done() return value to support NAPI polling
         - add support for re-starting auto-negotiation
      - Broadcom switches (b53):
         - support BCM5325 switches
         - add bcm63xx EPHY power control
      - Synopsys (stmmac):
         - lots of code refactoring and cleanups
      - TI:
         - icssg-prueth: read firmware-names from device tree
         - icssg: PRP offload support
      - Microchip:
         - lan78xx: convert to PHYLINK for improved PHY and MAC management
         - ksz: add KSZ8463 switch support
      - Intel:
         - support similar queue priority scheme in multi-queue and
           time-sensitive networking (taprio)
         - support packet pre-emption in both
      - RealTek (r8169):
         - enable EEE at 5Gbps on RTL8126
      - Airoha:
         - add PPPoE offload support
         - MDIO bus controller for Airoha AN7583

   - Ethernet PHYs:
      - support for the IPQ5018 internal GE PHY
      - micrel KSZ9477 switch-integrated PHYs:
         - add MDI/MDI-X control support
         - add RX error counters
         - add cable test support
         - add Signal Quality Indicator (SQI) reporting
      - dp83tg720: improve reset handling and reduce link recovery time
      - support bcm54811 (and its MII-Lite interface type)
      - air_en8811h: support resume/suspend
      - support PHY counters for QCA807x and QCA808x
      - support WoL for QCA807x

   - CAN drivers:
      - rcar_canfd: support for Transceiver Delay Compensation
      - kvaser: report FW versions via devlink dev info

   - WiFi:
      - extended regulatory info support (6 GHz)
      - add statistics and beacon monitor for Multi-Link Operation (MLO)
      - support S1G aggregation, improve S1G support
      - add Radio Measurement action fields
      - support per-radio RTS threshold
      - some work around how FIPS affects wifi, which was wrong (RC4 is
        used by TKIP, not only WEP)
      - improvements for unsolicited probe response handling

   - WiFi drivers:
      - RealTek (rtw88):
         - IBSS mode for SDIO devices
      - RealTek (rtw89):
         - BT coexistence for MLO/WiFi7
         - concurrent station + P2P support
         - support for USB devices RTL8851BU/RTL8852BU
      - Intel (iwlwifi):
         - use embedded PNVM in (to be released) FW images to fix
           compatibility issues
         - many cleanups (unused FW APIs, PCIe code, WoWLAN)
         - some FIPS interoperability
      - MediaTek (mt76):
         - firmware recovery improvements
         - more MLO work
      - Qualcomm/Atheros (ath12k):
         - fix scan on multi-radio devices
         - more EHT/Wi-Fi 7 features
         - encapsulation/decapsulation offload
      - Broadcom (brcm80211):
         - support SDIO 43751 device

   - Bluetooth:
      - hci_event: add support for handling LE BIG Sync Lost event
      - ISO: add socket option to report packet seqnum via CMSG
      - ISO: support SCM_TIMESTAMPING for ISO TS

   - Bluetooth drivers:
      - intel_pcie: support Function Level Reset
      - nxpuart: add support for 4M baudrate
      - nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
  dpll: zl3073x: Fix build failure
  selftests: bpf: fix legacy netfilter options
  ipv6: annotate data-races around rt->fib6_nsiblings
  ipv6: fix possible infinite loop in fib6_info_uses_dev()
  ipv6: prevent infinite loop in rt6_nlmsg_size()
  ipv6: add a retry logic in net6_rt_notify()
  vrf: Drop existing dst reference in vrf_ip6_input_dst
  net/sched: taprio: align entry index attr validation with mqprio
  net: fsl_pq_mdio: use dev_err_probe
  selftests: rtnetlink.sh: remove esp4_offload after test
  vsock: remove unnecessary null check in vsock_getname()
  igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
  stmmac: xsk: fix negative overflow of budget in zerocopy mode
  dt-bindings: ieee802154: Convert at86rf230.txt yaml format
  net: dsa: microchip: Disable PTP function of KSZ8463
  net: dsa: microchip: Setup fiber ports for KSZ8463
  net: dsa: microchip: Write switch MAC address differently for KSZ8463
  net: dsa: microchip: Use different registers for KSZ8463
  net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
  dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
  ...

1 files changed, 60 insertions, 41 deletions

diff --git a/tools/testing/selftests/drivers/net/hw/tso.py b/tools/testing/selftests/drivers/net/hw/tso.py
index 3370827409aa..c13dd5efa27a 100755
--- a/tools/testing/selftests/drivers/net/hw/tso.py
+++ b/tools/testing/selftests/drivers/net/hw/tso.py
@@ -34,7 +34,7 @@ def tcp_sock_get_retrans(sock):
 
 
 def run_one_stream(cfg, ipver, remote_v4, remote_v6, should_lso):
-    cfg.require_cmd("socat", remote=True)
+    cfg.require_cmd("socat", local=False, remote=True)
 
     port = rand_port()
     listen_cmd = f"socat -{ipver} -t 2 -u TCP-LISTEN:{port},reuseport /dev/null,ignoreeof"
@@ -102,7 +102,7 @@ def build_tunnel(cfg, outer_ipver, tun_info):
     remote_addr = cfg.remote_addr_v[outer_ipver]
 
     tun_type = tun_info[0]
-    tun_arg  = tun_info[2]
+    tun_arg  = tun_info[1]
     ip(f"link add {tun_type}-ksft type {tun_type} {tun_arg} local {local_addr} remote {remote_addr} dev {cfg.ifname}")
     defer(ip, f"link del {tun_type}-ksft")
     ip(f"link set dev {tun_type}-ksft up")
@@ -119,15 +119,30 @@ def build_tunnel(cfg, outer_ipver, tun_info):
     return remote_v4, remote_v6
 
 
+def restore_wanted_features(cfg):
+    features_cmd = ""
+    for feature in cfg.hw_features:
+        setting = "on" if feature in cfg.wanted_features else "off"
+        features_cmd += f" {feature} {setting}"
+    try:
+        ethtool(f"-K {cfg.ifname} {features_cmd}")
+    except Exception as e:
+        ksft_pr(f"WARNING: failure restoring wanted features: {e}")
+
+
 def test_builder(name, cfg, outer_ipver, feature, tun=None, inner_ipver=None):
     """Construct specific tests from the common template."""
     def f(cfg):
         cfg.require_ipver(outer_ipver)
+        defer(restore_wanted_features, cfg)
 
         if not cfg.have_stat_super_count and \
            not cfg.have_stat_wire_count:
             raise KsftSkipEx(f"Device does not support LSO queue stats")
 
+        if feature not in cfg.hw_features:
+            raise KsftSkipEx(f"Device does not support {feature}")
+
         ipver = outer_ipver
         if tun:
             remote_v4, remote_v6 = build_tunnel(cfg, ipver, tun)
@@ -136,36 +151,21 @@ def test_builder(name, cfg, outer_ipver, feature, tun=None, inner_ipver=None):
             remote_v4 = cfg.remote_addr_v["4"]
             remote_v6 = cfg.remote_addr_v["6"]
 
-        tun_partial = tun and tun[1]
-        # Tunnel which can silently fall back to gso-partial
-        has_gso_partial = tun and 'tx-gso-partial' in cfg.features
-
-        # For TSO4 via partial we need mangleid
-        if ipver == "4" and feature in cfg.partial_features:
-            ksft_pr("Testing with mangleid enabled")
-            if 'tx-tcp-mangleid-segmentation' not in cfg.features:
-                ethtool(f"-K {cfg.ifname} tx-tcp-mangleid-segmentation on")
-                defer(ethtool, f"-K {cfg.ifname} tx-tcp-mangleid-segmentation off")
-
         # First test without the feature enabled.
         ethtool(f"-K {cfg.ifname} {feature} off")
-        if has_gso_partial:
-            ethtool(f"-K {cfg.ifname} tx-gso-partial off")
         run_one_stream(cfg, ipver, remote_v4, remote_v6, should_lso=False)
 
-        # Now test with the feature enabled.
-        # For compatible tunnels only - just GSO partial, not specific feature.
-        if has_gso_partial:
+        ethtool(f"-K {cfg.ifname} tx-gso-partial off")
+        ethtool(f"-K {cfg.ifname} tx-tcp-mangleid-segmentation off")
+        if feature in cfg.partial_features:
             ethtool(f"-K {cfg.ifname} tx-gso-partial on")
-            run_one_stream(cfg, ipver, remote_v4, remote_v6,
-                           should_lso=tun_partial)
+            if ipver == "4":
+                ksft_pr("Testing with mangleid enabled")
+                ethtool(f"-K {cfg.ifname} tx-tcp-mangleid-segmentation on")
 
         # Full feature enabled.
-        if feature in cfg.features:
-            ethtool(f"-K {cfg.ifname} {feature} on")
-            run_one_stream(cfg, ipver, remote_v4, remote_v6, should_lso=True)
-        else:
-            raise KsftXfailEx(f"Device does not support {feature}")
+        ethtool(f"-K {cfg.ifname} {feature} on")
+        run_one_stream(cfg, ipver, remote_v4, remote_v6, should_lso=True)
 
     f.__name__ = name + ((outer_ipver + "_") if tun else "") + "ipv" + inner_ipver
     return f
@@ -176,23 +176,39 @@ def query_nic_features(cfg) -> None:
     cfg.have_stat_super_count = False
     cfg.have_stat_wire_count = False
 
-    cfg.features = set()
     features = cfg.ethnl.features_get({"header": {"dev-index": cfg.ifindex}})
-    for f in features["active"]["bits"]["bit"]:
-        cfg.features.add(f["name"])
+
+    cfg.wanted_features = set()
+    for f in features["wanted"]["bits"]["bit"]:
+        cfg.wanted_features.add(f["name"])
+
+    cfg.hw_features = set()
+    hw_all_features_cmd = ""
+    for f in features["hw"]["bits"]["bit"]:
+        if f.get("value", False):
+            feature = f["name"]
+            cfg.hw_features.add(feature)
+            hw_all_features_cmd += f" {feature} on"
+    try:
+        ethtool(f"-K {cfg.ifname} {hw_all_features_cmd}")
+    except Exception as e:
+        ksft_pr(f"WARNING: failure enabling all hw features: {e}")
+        ksft_pr("partial gso feature detection may be impacted")
 
     # Check which features are supported via GSO partial
     cfg.partial_features = set()
-    if 'tx-gso-partial' in cfg.features:
+    if 'tx-gso-partial' in cfg.hw_features:
         ethtool(f"-K {cfg.ifname} tx-gso-partial off")
 
         no_partial = set()
         features = cfg.ethnl.features_get({"header": {"dev-index": cfg.ifindex}})
         for f in features["active"]["bits"]["bit"]:
             no_partial.add(f["name"])
-        cfg.partial_features = cfg.features - no_partial
+        cfg.partial_features = cfg.hw_features - no_partial
         ethtool(f"-K {cfg.ifname} tx-gso-partial on")
 
+    restore_wanted_features(cfg)
+
     stats = cfg.netnl.qstats_get({"ifindex": cfg.ifindex}, dump=True)
     if stats:
         if 'tx-hw-gso-packets' in stats[0]:
@@ -211,13 +227,14 @@ def main() -> None:
         query_nic_features(cfg)
 
         test_info = (
-            # name,       v4/v6  ethtool_feature              tun:(type,    partial, args)
-            ("",            "4", "tx-tcp-segmentation",           None),
-            ("",            "6", "tx-tcp6-segmentation",          None),
-            ("vxlan",        "", "tx-udp_tnl-segmentation",       ("vxlan",  True,  "id 100 dstport 4789 noudpcsum")),
-            ("vxlan_csum",   "", "tx-udp_tnl-csum-segmentation",  ("vxlan",  False, "id 100 dstport 4789 udpcsum")),
-            ("gre",         "4", "tx-gre-segmentation",           ("gre",    False,  "")),
-            ("gre",         "6", "tx-gre-segmentation",           ("ip6gre", False,  "")),
+            # name,       v4/v6  ethtool_feature               tun:(type, args, inner ip versions)
+            ("",           "4", "tx-tcp-segmentation",         None),
+            ("",           "6", "tx-tcp6-segmentation",        None),
+            ("vxlan",      "4", "tx-udp_tnl-segmentation",     ("vxlan", "id 100 dstport 4789 noudpcsum", ("4", "6"))),
+            ("vxlan",      "6", "tx-udp_tnl-segmentation",     ("vxlan", "id 100 dstport 4789 udp6zerocsumtx udp6zerocsumrx", ("4", "6"))),
+            ("vxlan_csum", "", "tx-udp_tnl-csum-segmentation", ("vxlan", "id 100 dstport 4789 udpcsum", ("4", "6"))),
+            ("gre",        "4", "tx-gre-segmentation",         ("gre",   "", ("4", "6"))),
+            ("gre",        "6", "tx-gre-segmentation",         ("ip6gre","", ("4", "6"))),
         )
 
         cases = []
@@ -227,11 +244,13 @@ def main() -> None:
                 if info[1] and outer_ipver != info[1]:
                     continue
 
-                cases.append(test_builder(info[0], cfg, outer_ipver, info[2],
-                                          tun=info[3], inner_ipver="4"))
                 if info[3]:
-                    cases.append(test_builder(info[0], cfg, outer_ipver, info[2],
-                                              tun=info[3], inner_ipver="6"))
+                    cases += [
+                        test_builder(info[0], cfg, outer_ipver, info[2], info[3], inner_ipver)
+                        for inner_ipver in info[3][2]
+                    ]
+                else:
+                    cases.append(test_builder(info[0], cfg, outer_ipver, info[2], None, outer_ipver))
 
         ksft_run(cases=cases, args=(cfg, ))
     ksft_exit()