summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--include/net/cfg80211.h4
-rw-r--r--include/uapi/linux/nl80211.h26
-rw-r--r--net/wireless/nl80211.c11
3 files changed, 41 insertions, 0 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 4ab2c49423dc..e309cc826b40 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -565,6 +565,7 @@ struct vif_params {
* with the get_key() callback, must be in little endian,
* length given by @seq_len.
* @seq_len: length of @seq.
+ * @vlan_id: vlan_id for VLAN group key (if nonzero)
* @mode: key install mode (RX_TX, NO_TX or SET_TX)
*/
struct key_params {
@@ -572,6 +573,7 @@ struct key_params {
const u8 *seq;
int key_len;
int seq_len;
+ u16 vlan_id;
u32 cipher;
enum nl80211_key_mode mode;
};
@@ -1124,6 +1126,7 @@ struct sta_txpwr {
* (bitmask of BIT(%NL80211_STA_FLAG_...))
* @listen_interval: listen interval or -1 for no change
* @aid: AID or zero for no change
+ * @vlan_id: VLAN ID for station (if nonzero)
* @peer_aid: mesh peer AID or zero for no change
* @plink_action: plink action to take
* @plink_state: set the peer link state for a station
@@ -1159,6 +1162,7 @@ struct station_parameters {
u32 sta_modify_mask;
int listen_interval;
u16 aid;
+ u16 vlan_id;
u16 peer_aid;
u8 supported_rates_len;
u8 plink_action;
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 64135ab3a7ac..341e0e8cae46 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -249,6 +249,22 @@
*/
/**
+ * DOC: VLAN offload support for setting group keys and binding STAs to VLANs
+ *
+ * By setting @NL80211_EXT_FEATURE_VLAN_OFFLOAD flag drivers can indicate they
+ * support offloading VLAN functionality in a manner where the driver exposes a
+ * single netdev that uses VLAN tagged frames and separate VLAN-specific netdevs
+ * can then be added using RTM_NEWLINK/IFLA_VLAN_ID similarly to the Ethernet
+ * case. Frames received from stations that are not assigned to any VLAN are
+ * delivered on the main netdev and frames to such stations can be sent through
+ * that main netdev.
+ *
+ * %NL80211_CMD_NEW_KEY (for group keys), %NL80211_CMD_NEW_STATION, and
+ * %NL80211_CMD_SET_STATION will optionally specify vlan_id using
+ * %NL80211_ATTR_VLAN_ID.
+ */
+
+/**
* enum nl80211_commands - supported nl80211 commands
*
* @NL80211_CMD_UNSPEC: unspecified command to catch errors
@@ -2381,6 +2397,9 @@ enum nl80211_commands {
* the allowed channel bandwidth configurations. (u8 attribute)
* Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
*
+ * @NL80211_ATTR_VLAN_ID: VLAN ID (1..4094) for the station and VLAN group key
+ * (u16).
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2843,6 +2862,8 @@ enum nl80211_attrs {
NL80211_ATTR_WIPHY_EDMG_CHANNELS,
NL80211_ATTR_WIPHY_EDMG_BW_CONFIG,
+ NL80211_ATTR_VLAN_ID,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -5492,6 +5513,10 @@ enum nl80211_feature_flags {
* @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in
* station mode (SAE password is passed as part of the connect command).
*
+ * @NL80211_EXT_FEATURE_VLAN_OFFLOAD: The driver supports a single netdev
+ * with VLAN tagged frames and separate VLAN-specific netdevs added using
+ * vconfig similarly to the Ethernet case.
+ *
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
*/
@@ -5537,6 +5562,7 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_EXT_KEY_ID,
NL80211_EXT_FEATURE_STA_TX_PWR,
NL80211_EXT_FEATURE_SAE_OFFLOAD,
+ NL80211_EXT_FEATURE_VLAN_OFFLOAD,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index d1451e731bb8..50761a4102bd 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -624,6 +624,7 @@ const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
.len = SAE_PASSWORD_MAX_LEN },
[NL80211_ATTR_TWT_RESPONDER] = { .type = NLA_FLAG },
[NL80211_ATTR_HE_OBSS_PD] = NLA_POLICY_NESTED(he_obss_pd_policy),
+ [NL80211_ATTR_VLAN_ID] = NLA_POLICY_RANGE(NLA_U16, 1, VLAN_N_VID - 2),
};
/* policy for the key attributes */
@@ -3940,6 +3941,10 @@ static int nl80211_new_key(struct sk_buff *skb, struct genl_info *info)
key.type != NL80211_KEYTYPE_GROUP)
return -EINVAL;
+ if (key.type == NL80211_KEYTYPE_GROUP &&
+ info->attrs[NL80211_ATTR_VLAN_ID])
+ key.p.vlan_id = nla_get_u16(info->attrs[NL80211_ATTR_VLAN_ID]);
+
if (!rdev->ops->add_key)
return -EOPNOTSUPP;
@@ -5711,6 +5716,9 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
if (info->attrs[NL80211_ATTR_STA_AID])
params.aid = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
+ if (info->attrs[NL80211_ATTR_VLAN_ID])
+ params.vlan_id = nla_get_u16(info->attrs[NL80211_ATTR_VLAN_ID]);
+
if (info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL])
params.listen_interval =
nla_get_u16(info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]);
@@ -5856,6 +5864,9 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
params.listen_interval =
nla_get_u16(info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]);
+ if (info->attrs[NL80211_ATTR_VLAN_ID])
+ params.vlan_id = nla_get_u16(info->attrs[NL80211_ATTR_VLAN_ID]);
+
if (info->attrs[NL80211_ATTR_STA_SUPPORT_P2P_PS]) {
params.support_p2p_ps =
nla_get_u8(info->attrs[NL80211_ATTR_STA_SUPPORT_P2P_PS]);