summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/testing/sysfs-class-led-trigger-usbport12
-rw-r--r--Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt41
-rw-r--r--Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt23
-rw-r--r--Documentation/devicetree/bindings/phy/mxs-usb-phy.txt10
-rw-r--r--Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt64
-rw-r--r--Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt101
-rw-r--r--Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt6
-rw-r--r--Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt31
-rw-r--r--Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt3
-rw-r--r--Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt1
-rw-r--r--Documentation/devicetree/bindings/phy/ti-phy.txt2
-rw-r--r--Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt2
-rw-r--r--Documentation/devicetree/bindings/usb/dwc2.txt5
-rw-r--r--Documentation/devicetree/bindings/usb/dwc3-cavium.txt28
-rw-r--r--Documentation/devicetree/bindings/usb/dwc3.txt8
-rw-r--r--Documentation/devicetree/bindings/usb/generic.txt6
-rw-r--r--Documentation/devicetree/bindings/usb/renesas_usbhs.txt1
-rw-r--r--Documentation/devicetree/bindings/usb/rockchip,dwc3.txt59
-rw-r--r--Documentation/devicetree/bindings/usb/usb4604.txt19
-rw-r--r--Documentation/devicetree/bindings/usb/usbmisc-imx.txt1
-rw-r--r--Documentation/kernel-parameters.txt2
-rw-r--r--Documentation/leds/ledtrig-usbport.txt41
-rw-r--r--MAINTAINERS3
-rw-r--r--drivers/bluetooth/bcm203x.c4
-rw-r--r--drivers/extcon/Kconfig6
-rw-r--r--drivers/extcon/Makefile1
-rw-r--r--drivers/extcon/extcon-adc-jack.c27
-rw-r--r--drivers/extcon/extcon-arizona.c27
-rw-r--r--drivers/extcon/extcon-axp288.c8
-rw-r--r--drivers/extcon/extcon-gpio.c3
-rw-r--r--drivers/extcon/extcon-max14577.c18
-rw-r--r--drivers/extcon/extcon-max3355.c8
-rw-r--r--drivers/extcon/extcon-max77693.c46
-rw-r--r--drivers/extcon/extcon-max77843.c22
-rw-r--r--drivers/extcon/extcon-max8997.c20
-rw-r--r--drivers/extcon/extcon-palmas.c16
-rw-r--r--drivers/extcon/extcon-qcom-spmi-misc.c170
-rw-r--r--drivers/extcon/extcon-rt8973a.c4
-rw-r--r--drivers/extcon/extcon-sm5502.c4
-rw-r--r--drivers/extcon/extcon-usb-gpio.c8
-rw-r--r--drivers/extcon/extcon.c774
-rw-r--r--drivers/media/dvb-frontends/rtl2832_sdr.c1
-rw-r--r--drivers/media/radio/si470x/radio-si470x-usb.c1
-rw-r--r--drivers/media/rc/imon.c13
-rw-r--r--drivers/media/rc/redrat3.c4
-rw-r--r--drivers/media/usb/airspy/airspy.c1
-rw-r--r--drivers/media/usb/as102/as102_usb_drv.c2
-rw-r--r--drivers/media/usb/au0828/au0828-video.c1
-rw-r--r--drivers/media/usb/cpia2/cpia2_usb.c1
-rw-r--r--drivers/media/usb/cx231xx/cx231xx-audio.c2
-rw-r--r--drivers/media/usb/cx231xx/cx231xx-core.c4
-rw-r--r--drivers/media/usb/cx231xx/cx231xx-vbi.c2
-rw-r--r--drivers/media/usb/dvb-usb/dib0700_core.c4
-rw-r--r--drivers/media/usb/em28xx/em28xx-audio.c1
-rw-r--r--drivers/media/usb/em28xx/em28xx-core.c1
-rw-r--r--drivers/media/usb/gspca/benq.c4
-rw-r--r--drivers/media/usb/gspca/gspca.c4
-rw-r--r--drivers/media/usb/gspca/konica.c4
-rw-r--r--drivers/media/usb/hackrf/hackrf.c1
-rw-r--r--drivers/media/usb/hdpvr/hdpvr-video.c4
-rw-r--r--drivers/media/usb/msi2500/msi2500.c1
-rw-r--r--drivers/media/usb/pwc/pwc-if.c1
-rw-r--r--drivers/media/usb/s2255/s2255drv.c9
-rw-r--r--drivers/media/usb/stk1160/stk1160-video.c4
-rw-r--r--drivers/media/usb/stkwebcam/stk-webcam.c4
-rw-r--r--drivers/media/usb/tm6000/tm6000-dvb.c4
-rw-r--r--drivers/media/usb/tm6000/tm6000-video.c1
-rw-r--r--drivers/media/usb/usbvision/usbvision-core.c5
-rw-r--r--drivers/media/usb/zr364xx/zr364xx.c4
-rw-r--r--drivers/mmc/host/vub300.c2
-rw-r--r--drivers/phy/Kconfig36
-rw-r--r--drivers/phy/Makefile4
-rw-r--r--drivers/phy/phy-bcm-ns-usb3.c274
-rw-r--r--drivers/phy/phy-bcm-ns2-pcie.c28
-rw-r--r--drivers/phy/phy-core.c15
-rw-r--r--drivers/phy/phy-da8xx-usb.c2
-rw-r--r--drivers/phy/phy-exynos5-usbdrd.c4
-rw-r--r--drivers/phy/phy-omap-usb2.c100
-rw-r--r--drivers/phy/phy-qcom-ufs.c6
-rw-r--r--drivers/phy/phy-rcar-gen3-usb2.c1
-rw-r--r--drivers/phy/phy-rockchip-inno-usb2.c707
-rw-r--r--drivers/phy/phy-rockchip-pcie.c357
-rw-r--r--drivers/phy/phy-rockchip-typec.c1023
-rw-r--r--drivers/phy/phy-rockchip-usb.c20
-rw-r--r--drivers/phy/phy-sun4i-usb.c154
-rw-r--r--drivers/phy/phy-twl4030-usb.c25
-rw-r--r--drivers/phy/tegra/xusb.c4
-rw-r--r--drivers/usb/Kconfig24
-rw-r--r--drivers/usb/atm/cxacru.c6
-rw-r--r--drivers/usb/atm/speedtch.c1
-rw-r--r--drivers/usb/atm/ueagle-atm.c13
-rw-r--r--drivers/usb/atm/usbatm.c8
-rw-r--r--drivers/usb/chipidea/ci_hdrc_imx.c3
-rw-r--r--drivers/usb/chipidea/ci_hdrc_imx.h1
-rw-r--r--drivers/usb/chipidea/host.c3
-rw-r--r--drivers/usb/chipidea/udc.c42
-rw-r--r--drivers/usb/chipidea/usbmisc_imx.c22
-rw-r--r--drivers/usb/class/cdc-acm.c49
-rw-r--r--drivers/usb/class/cdc-wdm.c165
-rw-r--r--drivers/usb/class/usbtmc.c11
-rw-r--r--drivers/usb/common/ulpi.c16
-rw-r--r--drivers/usb/core/Kconfig25
-rw-r--r--drivers/usb/core/Makefile5
-rw-r--r--drivers/usb/core/hcd.c7
-rw-r--r--drivers/usb/core/hub.c11
-rw-r--r--drivers/usb/core/ledtrig-usbport.c314
-rw-r--r--drivers/usb/core/message.c10
-rw-r--r--drivers/usb/core/of.c1
-rw-r--r--drivers/usb/core/otg_whitelist.h2
-rw-r--r--drivers/usb/core/urb.c4
-rw-r--r--drivers/usb/core/usb.c11
-rw-r--r--drivers/usb/dwc2/core.c126
-rw-r--r--drivers/usb/dwc2/core.h8
-rw-r--r--drivers/usb/dwc2/gadget.c94
-rw-r--r--drivers/usb/dwc2/hcd.c2
-rw-r--r--drivers/usb/dwc2/hw.h1
-rw-r--r--drivers/usb/dwc3/Kconfig2
-rw-r--r--drivers/usb/dwc3/core.c122
-rw-r--r--drivers/usb/dwc3/core.h35
-rw-r--r--drivers/usb/dwc3/dwc3-of-simple.c48
-rw-r--r--drivers/usb/dwc3/gadget.c278
-rw-r--r--drivers/usb/dwc3/ulpi.c10
-rw-r--r--drivers/usb/gadget/Kconfig39
-rw-r--r--drivers/usb/gadget/composite.c16
-rw-r--r--drivers/usb/gadget/configfs.c5
-rw-r--r--drivers/usb/gadget/function/f_fs.c45
-rw-r--r--drivers/usb/gadget/function/f_hid.c28
-rw-r--r--drivers/usb/gadget/function/f_loopback.c14
-rw-r--r--drivers/usb/gadget/function/f_mass_storage.c28
-rw-r--r--drivers/usb/gadget/function/f_mass_storage.h1
-rw-r--r--drivers/usb/gadget/function/f_midi.c234
-rw-r--r--drivers/usb/gadget/function/f_ncm.c84
-rw-r--r--drivers/usb/gadget/function/f_printer.c6
-rw-r--r--drivers/usb/gadget/function/f_sourcesink.c6
-rw-r--r--drivers/usb/gadget/function/f_uvc.c7
-rw-r--r--drivers/usb/gadget/function/storage_common.c24
-rw-r--r--drivers/usb/gadget/function/storage_common.h10
-rw-r--r--drivers/usb/gadget/function/u_ether.c8
-rw-r--r--drivers/usb/gadget/function/u_ether.h1
-rw-r--r--drivers/usb/gadget/legacy/gmidi.c2
-rw-r--r--drivers/usb/gadget/u_f.c6
-rw-r--r--drivers/usb/gadget/u_f.h17
-rw-r--r--drivers/usb/gadget/udc/core.c4
-rw-r--r--drivers/usb/gadget/udc/fsl_qe_udc.c16
-rw-r--r--drivers/usb/gadget/udc/goku_udc.c5
-rw-r--r--drivers/usb/gadget/udc/net2280.c80
-rw-r--r--drivers/usb/gadget/udc/omap_udc.c2
-rw-r--r--drivers/usb/gadget/udc/pxa27x_udc.c51
-rw-r--r--drivers/usb/gadget/udc/udc-xilinx.c4
-rw-r--r--drivers/usb/host/Kconfig2
-rw-r--r--drivers/usb/host/bcma-hcd.c169
-rw-r--r--drivers/usb/host/ehci-platform.c2
-rw-r--r--drivers/usb/host/fhci-hcd.c4
-rw-r--r--drivers/usb/host/fsl-mph-dr-of.c18
-rw-r--r--drivers/usb/host/max3421-hcd.c8
-rw-r--r--drivers/usb/host/ohci-at91.c69
-rw-r--r--drivers/usb/host/ohci-omap.c1
-rw-r--r--drivers/usb/host/ohci-sa1111.c4
-rw-r--r--drivers/usb/host/uhci-hcd.c5
-rw-r--r--drivers/usb/host/whci/init.c2
-rw-r--r--drivers/usb/host/xhci-tegra.c2
-rw-r--r--drivers/usb/host/xhci.c4
-rw-r--r--drivers/usb/misc/Kconfig6
-rw-r--r--drivers/usb/misc/Makefile1
-rw-r--r--drivers/usb/misc/adutux.c21
-rw-r--r--drivers/usb/misc/appledisplay.c17
-rw-r--r--drivers/usb/misc/cypress_cy7c63.c5
-rw-r--r--drivers/usb/misc/cytherm.c32
-rw-r--r--drivers/usb/misc/ezusb.c2
-rw-r--r--drivers/usb/misc/ftdi-elan.c67
-rw-r--r--drivers/usb/misc/idmouse.c1
-rw-r--r--drivers/usb/misc/iowarrior.c26
-rw-r--r--drivers/usb/misc/ldusb.c28
-rw-r--r--drivers/usb/misc/legousbtower.c59
-rw-r--r--drivers/usb/misc/lvstest.c25
-rw-r--r--drivers/usb/misc/sisusbvga/sisusb.c3
-rw-r--r--drivers/usb/misc/trancevibrator.c3
-rw-r--r--drivers/usb/misc/usb4604.c175
-rw-r--r--drivers/usb/misc/usblcd.c9
-rw-r--r--drivers/usb/misc/usbsevseg.c8
-rw-r--r--drivers/usb/misc/uss720.c5
-rw-r--r--drivers/usb/misc/yurex.c16
-rw-r--r--drivers/usb/musb/Kconfig2
-rw-r--r--drivers/usb/musb/am35x.c8
-rw-r--r--drivers/usb/musb/da8xx.c164
-rw-r--r--drivers/usb/musb/musb_core.c81
-rw-r--r--drivers/usb/musb/musb_core.h2
-rw-r--r--drivers/usb/musb/musb_dsps.c80
-rw-r--r--drivers/usb/musb/musb_gadget.c3
-rw-r--r--drivers/usb/musb/musb_virthub.c1
-rw-r--r--drivers/usb/musb/omap2430.c76
-rw-r--r--drivers/usb/musb/sunxi.c61
-rw-r--r--drivers/usb/phy/phy-ab8500-usb.c8
-rw-r--r--drivers/usb/phy/phy-generic.c9
-rw-r--r--drivers/usb/phy/phy-mxs-usb.c61
-rw-r--r--drivers/usb/renesas_usbhs/common.c4
-rw-r--r--drivers/usb/renesas_usbhs/mod_gadget.c8
-rw-r--r--drivers/usb/renesas_usbhs/mod_host.c10
-rw-r--r--drivers/usb/renesas_usbhs/pipe.c4
-rw-r--r--drivers/usb/serial/cp210x.c1
-rw-r--r--drivers/usb/serial/keyspan_pda.c4
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c171
-rw-r--r--drivers/usb/storage/alauda.c11
-rw-r--r--drivers/usb/storage/scsiglue.c8
-rw-r--r--drivers/usb/storage/sddr09.c14
-rw-r--r--drivers/usb/storage/unusual_devs.h7
-rw-r--r--drivers/usb/storage/usb.c16
-rw-r--r--drivers/usb/usb-skeleton.c14
-rw-r--r--drivers/usb/usbip/Kconfig24
-rw-r--r--drivers/usb/usbip/stub_rx.c1
-rw-r--r--drivers/usb/usbip/vhci.h54
-rw-r--r--drivers/usb/usbip/vhci_hcd.c285
-rw-r--r--drivers/usb/usbip/vhci_rx.c21
-rw-r--r--drivers/usb/usbip/vhci_sysfs.c296
-rw-r--r--drivers/usb/usbip/vudc_dev.c2
-rw-r--r--drivers/usb/usbip/vudc_rx.c2
-rw-r--r--drivers/usb/wusbcore/cbaf.c3
-rw-r--r--drivers/usb/wusbcore/crypto.c4
-rw-r--r--drivers/usb/wusbcore/security.c4
-rw-r--r--drivers/usb/wusbcore/wa-nep.c9
-rw-r--r--drivers/usb/wusbcore/wa-xfer.c4
-rw-r--r--drivers/uwb/hwa-rc.c4
-rw-r--r--drivers/watchdog/pcwd_usb.c4
-rw-r--r--include/linux/bcma/bcma_regs.h1
-rw-r--r--include/linux/extcon.h191
-rw-r--r--include/linux/extcon/extcon-adc-jack.h4
-rw-r--r--include/linux/phy/phy.h3
-rw-r--r--include/linux/ulpi/driver.h8
-rw-r--r--include/linux/ulpi/interface.h9
-rw-r--r--include/linux/usb/composite.h3
-rw-r--r--include/linux/usb/gadget.h30
-rw-r--r--include/linux/usb_usual.h2
-rw-r--r--include/soc/at91/atmel-sfr.h14
-rw-r--r--include/uapi/linux/usb/functionfs.h2
234 files changed, 7197 insertions, 2122 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-usbport b/Documentation/ABI/testing/sysfs-class-led-trigger-usbport
new file mode 100644
index 000000000000..f440e690daef
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-led-trigger-usbport
@@ -0,0 +1,12 @@
+What: /sys/class/leds/<led>/ports/<port>
+Date: September 2016
+KernelVersion: 4.9
+Contact: linux-leds@vger.kernel.org
+ linux-usb@vger.kernel.org
+Description:
+ Every dir entry represents a single USB port that can be
+ selected for the USB port trigger. Selecting ports makes trigger
+ observing them for any connected devices and lighting on LED if
+ there are any.
+ Echoing "1" value selects USB port. Echoing "0" unselects it.
+ Current state can be also read.
diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt
new file mode 100644
index 000000000000..35383adb10f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt
@@ -0,0 +1,41 @@
+Qualcomm's PM8941 USB ID Extcon device
+
+Some Qualcomm PMICs have a "misc" module that can be used to detect when
+the USB ID pin has been pulled low or high.
+
+PROPERTIES
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: Should contain "qcom,pm8941-misc";
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: Should contain the offset to the misc address space
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Should contain the usb id interrupt
+
+- interrupt-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Should contain the string "usb_id" for the usb id interrupt
+
+Example:
+
+ pmic {
+ usb_id: misc@900 {
+ compatible = "qcom,pm8941-misc";
+ reg = <0x900>;
+ interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "usb_id";
+ };
+ }
+
+ usb-controller {
+ extcon = <&usb_id>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
new file mode 100644
index 000000000000..09aeba94538d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
@@ -0,0 +1,23 @@
+Driver for Broadcom Northstar USB 3.0 PHY
+
+Required properties:
+
+- compatible: one of: "brcm,ns-ax-usb3-phy", "brcm,ns-bx-usb3-phy".
+- reg: register mappings for DMP (Device Management Plugin) and ChipCommon B
+ MMI.
+- reg-names: "dmp" and "ccb-mii"
+
+Initialization of USB 3.0 PHY depends on Northstar version. There are currently
+three known series: Ax, Bx and Cx.
+Known A0: BCM4707 rev 0
+Known B0: BCM4707 rev 4, BCM53573 rev 2
+Known B1: BCM4707 rev 6
+Known C0: BCM47094 rev 0
+
+Example:
+ usb3-phy {
+ compatible = "brcm,ns-ax-usb3-phy";
+ reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
+ reg-names = "dmp", "ccb-mii";
+ #phy-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
index 379b84a567cc..1d25b04cd05e 100644
--- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
@@ -12,6 +12,16 @@ Required properties:
- interrupts: Should contain phy interrupt
- fsl,anatop: phandle for anatop register, it is only for imx6 SoC series
+Optional properties:
+- fsl,tx-cal-45-dn-ohms: Integer [30-55]. Resistance (in ohms) of switchable
+ high-speed trimming resistor connected in parallel with the 45 ohm resistor
+ that terminates the DN output signal. Default: 45
+- fsl,tx-cal-45-dp-ohms: Integer [30-55]. Resistance (in ohms) of switchable
+ high-speed trimming resistor connected in parallel with the 45 ohm resistor
+ that terminates the DP output signal. Default: 45
+- fsl,tx-d-cal: Integer [79-119]. Current trimming value (as a percentage) of
+ the 17.78mA TX reference current. Default: 100
+
Example:
usbphy1: usbphy@020c9000 {
compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
new file mode 100644
index 000000000000..3c29c77a7018
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
@@ -0,0 +1,64 @@
+ROCKCHIP USB2.0 PHY WITH INNO IP BLOCK
+
+Required properties (phy (parent) node):
+ - compatible : should be one of the listed compatibles:
+ * "rockchip,rk3366-usb2phy"
+ * "rockchip,rk3399-usb2phy"
+ - reg : the address offset of grf for usb-phy configuration.
+ - #clock-cells : should be 0.
+ - clock-output-names : specify the 480m output clock name.
+
+Optional properties:
+ - clocks : phandle + phy specifier pair, for the input clock of phy.
+ - clock-names : input clock name of phy, must be "phyclk".
+
+Required nodes : a sub-node is required for each port the phy provides.
+ The sub-node name is used to identify host or otg port,
+ and shall be the following entries:
+ * "otg-port" : the name of otg port.
+ * "host-port" : the name of host port.
+
+Required properties (port (child) node):
+ - #phy-cells : must be 0. See ./phy-bindings.txt for details.
+ - interrupts : specify an interrupt for each entry in interrupt-names.
+ - interrupt-names : a list which shall be the following entries:
+ * "otg-id" : for the otg id interrupt.
+ * "otg-bvalid" : for the otg vbus interrupt.
+ * "linestate" : for the host/otg linestate interrupt.
+
+Optional properties:
+ - phy-supply : phandle to a regulator that provides power to VBUS.
+ See ./phy-bindings.txt for details.
+
+Example:
+
+grf: syscon@ff770000 {
+ compatible = "rockchip,rk3366-grf", "syscon", "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+...
+
+ u2phy: usb2-phy@700 {
+ compatible = "rockchip,rk3366-usb2phy";
+ reg = <0x700 0x2c>;
+ #clock-cells = <0>;
+ clock-output-names = "sclk_otgphy0_480m";
+
+ u2phy_otg: otg-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "otg-id", "otg-bvalid", "linestate";
+ status = "okay";
+ };
+
+ u2phy_host: host-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "linestate";
+ status = "okay";
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
new file mode 100644
index 000000000000..6ea867e3176f
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
@@ -0,0 +1,101 @@
+* ROCKCHIP type-c PHY
+---------------------
+
+Required properties:
+ - compatible : must be "rockchip,rk3399-typec-phy"
+ - reg: Address and length of the usb phy control register set
+ - rockchip,grf : phandle to the syscon managing the "general
+ register files"
+ - clocks : phandle + clock specifier for the phy clocks
+ - clock-names : string, clock name, must be "tcpdcore", "tcpdphy-ref";
+ - assigned-clocks: main clock, should be <&cru SCLK_UPHY0_TCPDCORE> or
+ <&cru SCLK_UPHY1_TCPDCORE>;
+ - assigned-clock-rates : the phy core clk frequency, shall be: 50000000
+ - resets : a list of phandle + reset specifier pairs
+ - reset-names : string reset name, must be:
+ "uphy", "uphy-pipe", "uphy-tcphy"
+ - extcon : extcon specifier for the Power Delivery
+
+Note, there are 2 type-c phys for RK3399, and they are almost identical, except
+these registers(description below), every register node contains 3 sections:
+offset, enable bit, write mask bit.
+ - rockchip,typec-conn-dir : the register of type-c connector direction,
+ for type-c phy0, it must be <0xe580 0 16>;
+ for type-c phy1, it must be <0xe58c 0 16>;
+ - rockchip,usb3tousb2-en : the register of type-c force usb3 to usb2 enable
+ control.
+ for type-c phy0, it must be <0xe580 3 19>;
+ for type-c phy1, it must be <0xe58c 3 19>;
+ - rockchip,external-psm : the register of type-c phy external psm clock
+ selection.
+ for type-c phy0, it must be <0xe588 14 30>;
+ for type-c phy1, it must be <0xe594 14 30>;
+ - rockchip,pipe-status : the register of type-c phy pipe status.
+ for type-c phy0, it must be <0xe5c0 0 0>;
+ for type-c phy1, it must be <0xe5c0 16 16>;
+
+Required nodes : a sub-node is required for each port the phy provides.
+ The sub-node name is used to identify dp or usb3 port,
+ and shall be the following entries:
+ * "dp-port" : the name of DP port.
+ * "usb3-port" : the name of USB3 port.
+
+Required properties (port (child) node):
+- #phy-cells : must be 0, See ./phy-bindings.txt for details.
+
+Example:
+ tcphy0: phy@ff7c0000 {
+ compatible = "rockchip,rk3399-typec-phy";
+ reg = <0x0 0xff7c0000 0x0 0x40000>;
+ rockchip,grf = <&grf>;
+ extcon = <&fusb0>;
+ clocks = <&cru SCLK_UPHY0_TCPDCORE>,
+ <&cru SCLK_UPHY0_TCPDPHY_REF>;
+ clock-names = "tcpdcore", "tcpdphy-ref";
+ assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>;
+ assigned-clock-rates = <50000000>;
+ resets = <&cru SRST_UPHY0>,
+ <&cru SRST_UPHY0_PIPE_L00>,
+ <&cru SRST_P_UPHY0_TCPHY>;
+ reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+ rockchip,typec-conn-dir = <0xe580 0 16>;
+ rockchip,usb3tousb2-en = <0xe580 3 19>;
+ rockchip,external-psm = <0xe588 14 30>;
+ rockchip,pipe-status = <0xe5c0 0 0>;
+
+ tcphy0_dp: dp-port {
+ #phy-cells = <0>;
+ };
+
+ tcphy0_usb3: usb3-port {
+ #phy-cells = <0>;
+ };
+ };
+
+ tcphy1: phy@ff800000 {
+ compatible = "rockchip,rk3399-typec-phy";
+ reg = <0x0 0xff800000 0x0 0x40000>;
+ rockchip,grf = <&grf>;
+ extcon = <&fusb1>;
+ clocks = <&cru SCLK_UPHY1_TCPDCORE>,
+ <&cru SCLK_UPHY1_TCPDPHY_REF>;
+ clock-names = "tcpdcore", "tcpdphy-ref";
+ assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>;
+ assigned-clock-rates = <50000000>;
+ resets = <&cru SRST_UPHY1>,
+ <&cru SRST_UPHY1_PIPE_L00>,
+ <&cru SRST_P_UPHY1_TCPHY>;
+ reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+ rockchip,typec-conn-dir = <0xe58c 0 16>;
+ rockchip,usb3tousb2-en = <0xe58c 3 19>;
+ rockchip,external-psm = <0xe594 14 30>;
+ rockchip,pipe-status = <0xe5c0 16 16>;
+
+ tcphy1_dp: dp-port {
+ #phy-cells = <0>;
+ };
+
+ tcphy1_usb3: usb3-port {
+ #phy-cells = <0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
index 2281d6cdecb1..ace9cce2704a 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
@@ -6,6 +6,8 @@ This file provides information on what the device node for the R-Car generation
Required properties:
- compatible: "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
SoC.
+ "renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796
+ SoC.
"renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 compatible device.
When compatible with the generic version, nodes must list the
@@ -30,11 +32,11 @@ Example (R-Car H3):
compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
+ clocks = <&cpg CPG_MOD 703>;
};
usb-phy@ee0a0200 {
compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
reg = <0 0xee0a0200 0 0x700>;
- clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
+ clocks = <&cpg CPG_MOD 702>;
};
diff --git a/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
new file mode 100644
index 000000000000..0f6222a672ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
@@ -0,0 +1,31 @@
+Rockchip PCIE PHY
+-----------------------
+
+Required properties:
+ - compatible: rockchip,rk3399-pcie-phy
+ - #phy-cells: must be 0
+ - clocks: Must contain an entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: Must be "refclk"
+ - resets: Must contain an entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names: Must be "phy"
+
+Example:
+
+grf: syscon@ff770000 {
+ compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ...
+
+ pcie_phy: pcie-phy {
+ compatible = "rockchip,rk3399-pcie-phy";
+ #phy-cells = <0>;
+ clocks = <&cru SCLK_PCIEPHY_REF>;
+ clock-names = "refclk";
+ resets = <&cru SRST_PCIEPHY>;
+ reset-names = "phy";
+ };
+};
diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
index cc6be9680a6d..57dc388e2fa2 100644
--- a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
@@ -27,6 +27,9 @@ Optional Properties:
- clocks : phandle + clock specifier for the phy clocks
- clock-names: string, clock name, must be "phyclk"
- #clock-cells: for users of the phy-pll, should be 0
+- reset-names: Only allow the following entries:
+ - phy-reset
+- resets: Must contain an entry for each entry in reset-names.
Example:
diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
index 95736d77fbb7..287150db6db4 100644
--- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
@@ -10,6 +10,7 @@ Required properties:
* allwinner,sun8i-a23-usb-phy
* allwinner,sun8i-a33-usb-phy
* allwinner,sun8i-h3-usb-phy
+ * allwinner,sun50i-a64-usb-phy
- reg : a list of offset + length pairs
- reg-names :
* "phy_ctrl"
diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
index a3b394587874..cd13e6157088 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -31,6 +31,8 @@ OMAP USB2 PHY
Required properties:
- compatible: Should be "ti,omap-usb2"
+ Should be "ti,dra7x-usb2" for the 1st instance of USB2 PHY on
+ DRA7x
Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY
in DRA7x
- reg : Address and length of the register set for the device.
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index 341dc67f3472..0e03344e2e8b 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -81,6 +81,8 @@ i.mx specific properties
- fsl,usbmisc: phandler of non-core register device, with one
argument that indicate usb controller index
- disable-over-current: disable over current detect
+- over-current-active-high: over current signal polarity is high active,
+ typically over current signal polarity is low active.
- external-vbus-divider: enables off-chip resistor divider for Vbus
Example:
diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index 20a68bf2b4e7..7d16ebfaa5a1 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -26,7 +26,10 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties
- g-use-dma: enable dma usage in gadget driver.
- g-rx-fifo-size: size of rx fifo size in gadget mode.
- g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
-- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
+
+Deprecated properties:
+- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0)
+ in gadget mode.
Example:
diff --git a/Documentation/devicetree/bindings/usb/dwc3-cavium.txt b/Documentation/devicetree/bindings/usb/dwc3-cavium.txt
new file mode 100644
index 000000000000..710b782ccf65
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/dwc3-cavium.txt
@@ -0,0 +1,28 @@
+Cavium SuperSpeed DWC3 USB SoC controller
+
+Required properties:
+- compatible: Should contain "cavium,octeon-7130-usb-uctl"
+
+Required child node:
+A child node must exist to represent the core DWC3 IP block. The name of
+the node is not important. The content of the node is defined in dwc3.txt.
+
+Example device node:
+
+ uctl@1180069000000 {
+ compatible = "cavium,octeon-7130-usb-uctl";
+ reg = <0x00011800 0x69000000 0x00000000 0x00000100>;
+ ranges;
+ #address-cells = <0x00000002>;
+ #size-cells = <0x00000002>;
+ refclk-frequency = <0x05f5e100>;
+ refclk-type-ss = "dlmc_ref_clk0";
+ refclk-type-hs = "dlmc_ref_clk0";
+ power = <0x00000002 0x00000002 0x00000001>;
+ xhci@1690000000000 {
+ compatible = "cavium,octeon-7130-xhci", "synopsys,dwc3";
+ reg = <0x00016900 0x00000000 0x00000010 0x00000000>;
+ interrupt-parent = <0x00000010>;
+ interrupts = <0x00000009 0x00000004>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 7d7ce089b003..e3e6983288e3 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -13,7 +13,8 @@ Optional properties:
in the array is expected to be a handle to the USB2/HS PHY and
the second element is expected to be a handle to the USB3/SS PHY
- phys: from the *Generic PHY* bindings
- - phy-names: from the *Generic PHY* bindings
+ - phy-names: from the *Generic PHY* bindings; supported names are "usb2-phy"
+ or "usb3-phy".
- snps,usb3_lpm_capable: determines if platform is USB3 LPM capable
- snps,disable_scramble_quirk: true when SW should disable data scrambling.
Only really useful for FPGA builds.
@@ -39,6 +40,11 @@ Optional properties:
disabling the suspend signal to the PHY.
- snps,dis_rxdet_inp3_quirk: when set core will disable receiver detection
in PHY P3 power state.
+ - snps,dis-u2-freeclk-exists-quirk: when set, clear the u2_freeclk_exists
+ in GUSB2PHYCFG, specify that USB2 PHY doesn't provide
+ a free-running PHY clock.
+ - snps,dis-del-phy-power-chg-quirk: when set core will change PHY power
+ from P0 to P1/P2/P3 without delay.
- snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
utmi_l1_suspend_n, false when asserts utmi_sleep_n
- snps,hird-threshold: HIRD threshold
diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt
index bba825711873..bfadeb1c3bab 100644
--- a/Documentation/devicetree/bindings/usb/generic.txt
+++ b/Documentation/devicetree/bindings/usb/generic.txt
@@ -11,6 +11,11 @@ Optional properties:
"peripheral" and "otg". In case this attribute isn't
passed via DT, USB DRD controllers should default to
OTG.
+ - phy_type: tells USB controllers that we want to configure the core to support
+ a UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is
+ selected. Valid arguments are "utmi" and "utmi_wide".
+ In case this isn't passed via DT, USB controllers should
+ default to HW capability.
- otg-rev: tells usb driver the release number of the OTG and EH supplement
with which the device and its descriptors are compliant,
in binary-coded decimal (i.e. 2.0 is 0200H). This
@@ -34,6 +39,7 @@ dwc3@4a030000 {
usb-phy = <&usb2_phy>, <&usb3,phy>;
maximum-speed = "super-speed";
dr_mode = "otg";
+ phy_type = "utmi_wide";
otg-rev = <0x0200>;
adp-disable;
};
diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
index b6040563e51a..9e18e000339e 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
@@ -9,6 +9,7 @@ Required properties:
- "renesas,usbhs-r8a7793" for r8a7793 (R-Car M2-N) compatible device
- "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device
- "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device
+ - "renesas,usbhs-r8a7796" for r8a7796 (R-Car M3-W) compatible device
- "renesas,rcar-gen2-usbhs" for R-Car Gen2 compatible device
- "renesas,rcar-gen3-usbhs" for R-Car Gen3 compatible device
diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
new file mode 100644
index 000000000000..0536a938e3ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
@@ -0,0 +1,59 @@
+Rockchip SuperSpeed DWC3 USB SoC controller
+
+Required properties:
+- compatible: should contain "rockchip,rk3399-dwc3" for rk3399 SoC
+- clocks: A list of phandle + clock-specifier pairs for the
+ clocks listed in clock-names
+- clock-names: Should contain the following:
+ "ref_clk" Controller reference clk, have to be 24 MHz
+ "suspend_clk" Controller suspend clk, have to be 24 MHz or 32 KHz
+ "bus_clk" Master/Core clock, have to be >= 62.5 MHz for SS
+ operation and >= 30MHz for HS operation
+ "grf_clk" Controller grf clk
+
+Required child node:
+A child node must exist to represent the core DWC3 IP block. The name of
+the node is not important. The content of the node is defined in dwc3.txt.
+
+Phy documentation is provided in the following places:
+Documentation/devicetree/bindings/phy/rockchip,dwc3-usb-phy.txt
+
+Example device nodes:
+
+ usbdrd3_0: usb@fe800000 {
+ compatible = "rockchip,rk3399-dwc3";
+ clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
+ <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>;
+ clock-names = "ref_clk", "suspend_clk",
+ "bus_clk", "grf_clk";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+ usbdrd_dwc3_0: dwc3@fe800000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xfe800000 0x0 0x100000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "otg";
+ status = "disabled";
+ };
+ };
+
+ usbdrd3_1: usb@fe900000 {
+ compatible = "rockchip,rk3399-dwc3";
+ clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>,
+ <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_GRF>;
+ clock-names = "ref_clk", "suspend_clk",
+ "bus_clk", "grf_clk";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+ usbdrd_dwc3_1: dwc3@fe900000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xfe900000 0x0 0x100000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "otg";
+ status = "disabled";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/usb/usb4604.txt b/Documentation/devicetree/bindings/usb/usb4604.txt
new file mode 100644
index 000000000000..82506d17712c
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb4604.txt
@@ -0,0 +1,19 @@
+SMSC USB4604 High-Speed Hub Controller
+
+Required properties:
+- compatible: Should be "smsc,usb4604"
+
+Optional properties:
+- reg: Specifies the i2c slave address, it is required and should be 0x2d
+ if I2C is used.
+- reset-gpios: Should specify GPIO for reset.
+- initial-mode: Should specify initial mode.
+ (1 for HUB mode, 2 for STANDBY mode)
+
+Examples:
+ usb-hub@2d {
+ compatible = "smsc,usb4604";
+ reg = <0x2d>;
+ reset-gpios = <&gpx3 5 1>;
+ initial-mode = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
index 3539d4e7d23e..f1e27faf528e 100644
--- a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
+++ b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
@@ -6,6 +6,7 @@ Required properties:
"fsl,imx6q-usbmisc" for imx6q
"fsl,vf610-usbmisc" for Vybrid vf610
"fsl,imx6sx-usbmisc" for imx6sx
+ "fsl,imx7d-usbmisc" for imx7d
- reg: Should contain registers location and length
Examples:
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 0e285941e3c7..01085cdc47c1 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -4248,6 +4248,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
u = IGNORE_UAS (don't bind to the uas driver);
w = NO_WP_DETECT (don't test whether the
medium is write-protected).
+ y = ALWAYS_SYNC (issue a SYNCHRONIZE_CACHE
+ even if the device claims no cache)
Example: quirks=0419:aaf5:rl,0421:0433:rc
user_debug= [KNL,ARM]
diff --git a/Documentation/leds/ledtrig-usbport.txt b/Documentation/leds/ledtrig-usbport.txt
new file mode 100644
index 000000000000..69f54bfb4789
--- /dev/null
+++ b/Documentation/leds/ledtrig-usbport.txt
@@ -0,0 +1,41 @@
+USB port LED trigger
+====================
+
+This LED trigger can be used for signalling to the user a presence of USB device
+in a given port. It simply turns on LED when device appears and turns it off
+when it disappears.
+
+It requires selecting USB ports that should be observed. All available ones are
+listed as separated entries in a "ports" subdirectory. Selecting is handled by
+echoing "1" to a chosen port.
+
+Please note that this trigger allows selecting multiple USB ports for a single
+LED. This can be useful in two cases:
+
+1) Device with single USB LED and few physical ports
+
+In such a case LED will be turned on as long as there is at least one connected
+USB device.
+
+2) Device with a physical port handled by few controllers
+
+Some devices may have one controller per PHY standard. E.g. USB 3.0 physical
+port may be handled by ohci-platform, ehci-platform and xhci-hcd. If there is
+only one LED user will most likely want to assign ports from all 3 hubs.
+
+
+This trigger can be activated from user space on led class devices as shown
+below:
+
+ echo usbport > trigger
+
+This adds sysfs attributes to the LED that are documented in:
+Documentation/ABI/testing/sysfs-class-led-trigger-usbport
+
+Example use-case:
+
+ echo usbport > trigger
+ echo 1 > ports/usb1-port1
+ echo 1 > ports/usb2-port1
+ cat ports/usb1-port1
+ echo 0 > ports/usb1-port1
diff --git a/MAINTAINERS b/MAINTAINERS
index 434a43d3864d..d33c0383575b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12216,7 +12216,7 @@ S: Maintained
F: drivers/net/usb/lan78xx.*
USB MASS STORAGE DRIVER
-M: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
+M: Alan Stern <stern@rowland.harvard.edu>
L: linux-usb@vger.kernel.org
L: usb-storage@lists.one-eyed-alien.net
S: Maintained
@@ -12300,6 +12300,7 @@ F: drivers/net/usb/rtl8150.c
USB SERIAL SUBSYSTEM
M: Johan Hovold <johan@kernel.org>
L: linux-usb@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial.git
S: Maintained
F: Documentation/usb/usb-serial.txt
F: drivers/usb/serial/
diff --git a/drivers/bluetooth/bcm203x.c b/drivers/bluetooth/bcm203x.c
index 5b0ef7bbe8ac..5ce6d4176dc3 100644
--- a/drivers/bluetooth/bcm203x.c
+++ b/drivers/bluetooth/bcm203x.c
@@ -185,10 +185,8 @@ static int bcm203x_probe(struct usb_interface *intf, const struct usb_device_id
data->state = BCM203X_LOAD_MINIDRV;
data->urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!data->urb) {
- BT_ERR("Can't allocate URB");
+ if (!data->urb)
return -ENOMEM;
- }
if (request_firmware(&firmware, "BCM2033-MD.hex", &udev->dev) < 0) {
BT_ERR("Mini driver request failed");
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index 3d89e60a3e71..04788d92ea52 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -96,6 +96,12 @@ config EXTCON_PALMAS
Say Y here to enable support for USB peripheral and USB host
detection by palmas usb.
+config EXTCON_QCOM_SPMI_MISC
+ tristate "Qualcomm USB extcon support"
+ help
+ Say Y here to enable SPMI PMIC based USB cable detection
+ support on Qualcomm PMICs such as PM8941.
+
config EXTCON_RT8973A
tristate "Richtek RT8973A EXTCON support"
depends on I2C
diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
index 972c813c375b..31a0a999c4fb 100644
--- a/drivers/extcon/Makefile
+++ b/drivers/extcon/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o
obj-$(CONFIG_EXTCON_MAX77843) += extcon-max77843.o
obj-$(CONFIG_EXTCON_MAX8997) += extcon-max8997.o
obj-$(CONFIG_EXTCON_PALMAS) += extcon-palmas.o
+obj-$(CONFIG_EXTCON_QCOM_SPMI_MISC) += extcon-qcom-spmi-misc.o
obj-$(CONFIG_EXTCON_RT8973A) += extcon-rt8973a.o
obj-$(CONFIG_EXTCON_SM5502) += extcon-sm5502.o
obj-$(CONFIG_EXTCON_USB_GPIO) += extcon-usb-gpio.o
diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c
index 44e48aa78a84..bc538708c753 100644
--- a/drivers/extcon/extcon-adc-jack.c
+++ b/drivers/extcon/extcon-adc-jack.c
@@ -3,6 +3,9 @@
*
* Analog Jack extcon driver with ADC-based detection capability.
*
+ * Copyright (C) 2016 Samsung Electronics
+ * Chanwoo Choi <cw00.choi@samsung.com>
+ *
* Copyright (C) 2012 Samsung Electronics
* MyungJoo Ham <myungjoo.ham@samsung.com>
*
@@ -58,7 +61,7 @@ static void adc_jack_handler(struct work_struct *work)
struct adc_jack_data *data = container_of(to_delayed_work(work),
struct adc_jack_data,
handler);
- u32 state = 0;
+ struct adc_jack_cond *def;
int ret, adc_val;
int i;
@@ -70,17 +73,18 @@ static void adc_jack_handler(struct work_struct *work)
/* Get state from adc value with adc_conditions */
for (i = 0; i < data->num_conditions; i++) {
- struct adc_jack_cond *def = &data->adc_conditions[i];
- if (!def->state)
- break;
+ def = &data->adc_conditions[i];
if (def->min_adc <= adc_val && def->max_adc >= adc_val) {
- state = def->state;
- break;
+ extcon_set_state_sync(data->edev, def->id, true);
+ return;
}
}
- /* if no def has met, it means state = 0 (no cables attached) */
- extcon_set_state(data->edev, state);
+ /* Set the detached state if adc value is not included in the range */
+ for (i = 0; i < data->num_conditions; i++) {
+ def = &data->adc_conditions[i];
+ extcon_set_state_sync(data->edev, def->id, false);
+ }
}
static irqreturn_t adc_jack_irq_thread(int irq, void *_data)
@@ -114,16 +118,14 @@ static int adc_jack_probe(struct platform_device *pdev)
return -ENOMEM;
}
- if (!pdata->adc_conditions ||
- !pdata->adc_conditions[0].state) {
+ if (!pdata->adc_conditions) {
dev_err(&pdev->dev, "error: adc_conditions not defined.\n");
return -EINVAL;
}
data->adc_conditions = pdata->adc_conditions;
/* Check the length of array and set num_conditions */
- for (i = 0; data->adc_conditions[i].state; i++)
- ;
+ for (i = 0; data->adc_conditions[i].id != EXTCON_NONE; i++);
data->num_conditions = i;
data->chan = iio_channel_get(&pdev->dev, pdata->consumer_channel);
@@ -158,6 +160,7 @@ static int adc_jack_probe(struct platform_device *pdev)
if (data->wakeup_source)
device_init_wakeup(&pdev->dev, 1);
+ adc_jack_handler(&data->handler.work);
return 0;
}
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 1d8e0a57bd51..56e6c4c7c60d 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -183,7 +183,7 @@ static void arizona_extcon_hp_clamp(struct arizona_extcon_info *info,
if (clamp)
val = ARIZONA_RMV_SHRT_HP1L;
break;
- };
+ }
snd_soc_dapm_mutex_lock(arizona->dapm);
@@ -614,7 +614,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
}
/* If the cable was removed while measuring ignore the result */
- ret = extcon_get_cable_state_(info->edev, EXTCON_MECHANICAL);
+ ret = extcon_get_state(info->edev, EXTCON_MECHANICAL);
if (ret < 0) {
dev_err(arizona->dev, "Failed to check cable state: %d\n",
ret);
@@ -649,7 +649,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
else
report = EXTCON_JACK_HEADPHONE;
- ret = extcon_set_cable_state_(info->edev, report, true);
+ ret = extcon_set_state_sync(info->edev, report, true);
if (ret != 0)
dev_err(arizona->dev, "Failed to report HP/line: %d\n",
ret);
@@ -732,7 +732,7 @@ err:
ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
/* Just report headphone */
- ret = extcon_set_cable_state_(info->edev, EXTCON_JACK_HEADPHONE, true);
+ ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true);
if (ret != 0)
dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
@@ -789,7 +789,7 @@ err:
ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
/* Just report headphone */
- ret = extcon_set_cable_state_(info->edev, EXTCON_JACK_HEADPHONE, true);
+ ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true);
if (ret != 0)
dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
@@ -829,7 +829,7 @@ static void arizona_micd_detect(struct work_struct *work)
mutex_lock(&info->lock);
/* If the cable was removed while measuring ignore the result */
- ret = extcon_get_cable_state_(info->edev, EXTCON_MECHANICAL);
+ ret = extcon_get_state(info->edev, EXTCON_MECHANICAL);
if (ret < 0) {
dev_err(arizona->dev, "Failed to check cable state: %d\n",
ret);
@@ -914,7 +914,7 @@ static void arizona_micd_detect(struct work_struct *work)
arizona_identify_headphone(info);
- ret = extcon_set_cable_state_(info->edev,
+ ret = extcon_set_state_sync(info->edev,
EXTCON_JACK_MICROPHONE, true);
if (ret != 0)
dev_err(arizona->dev, "Headset report failed: %d\n",
@@ -1108,7 +1108,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
if (info->last_jackdet == present) {
dev_dbg(arizona->dev, "Detected jack\n");
- ret = extcon_set_cable_state_(info->edev,
+ ret = extcon_set_state_sync(info->edev,
EXTCON_MECHANICAL, true);
if (ret != 0)
@@ -1149,10 +1149,13 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
info->micd_ranges[i].key, 0);
input_sync(info->input);
- ret = extcon_update_state(info->edev, 0xffffffff, 0);
- if (ret != 0)
- dev_err(arizona->dev, "Removal report failed: %d\n",
- ret);
+ for (i = 0; i < ARRAY_SIZE(arizona_cable) - 1; i++) {
+ ret = extcon_set_state_sync(info->edev,
+ arizona_cable[i], false);
+ if (ret != 0)
+ dev_err(arizona->dev,
+ "Removal report failed: %d\n", ret);
+ }
regmap_update_bits(arizona->regmap,
ARIZONA_JACK_DETECT_DEBOUNCE,
diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
index fd55c2f2080a..42f41e808292 100644
--- a/drivers/extcon/extcon-axp288.c
+++ b/drivers/extcon/extcon-axp288.c
@@ -189,19 +189,19 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
switch (chrg_type) {
case DET_STAT_SDP:
- dev_dbg(info->dev, "sdp cable is connecetd\n");
+ dev_dbg(info->dev, "sdp cable is connected\n");
notify_otg = true;
notify_charger = true;
cable = EXTCON_CHG_USB_SDP;
break;
case DET_STAT_CDP:
- dev_dbg(info->dev, "cdp cable is connecetd\n");
+ dev_dbg(info->dev, "cdp cable is connected\n");
notify_otg = true;
notify_charger = true;
cable = EXTCON_CHG_USB_CDP;
break;
case DET_STAT_DCP:
- dev_dbg(info->dev, "dcp cable is connecetd\n");
+ dev_dbg(info->dev, "dcp cable is connected\n");
notify_charger = true;
cable = EXTCON_CHG_USB_DCP;
break;
@@ -226,7 +226,7 @@ notify_otg:
}
if (notify_charger)
- extcon_set_cable_state_(info->edev, cable, vbus_attach);
+ extcon_set_state_sync(info->edev, cable, vbus_attach);
/* Clear the flags on disconnect event */
if (!vbus_attach)
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index d023789f0fda..ebed22f22d75 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -49,7 +49,8 @@ static void gpio_extcon_work(struct work_struct *work)
state = gpiod_get_value_cansleep(data->id_gpiod);
if (data->pdata->gpio_active_low)
state = !state;
- extcon_set_state(data->edev, state);
+
+ extcon_set_state_sync(data->edev, data->pdata->extcon_id, state);
}
static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
diff --git a/drivers/extcon/extcon-max14577.c b/drivers/extcon/extcon-max14577.c
index 852a7112f451..12e26c4e7763 100644
--- a/drivers/extcon/extcon-max14577.c
+++ b/drivers/extcon/extcon-max14577.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 2013,2014 Samsung Electronics
* Chanwoo Choi <cw00.choi@samsung.com>
- * Krzysztof Kozlowski <k.kozlowski@samsung.com>
+ * Krzysztof Kozlowski <krzk@kernel.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -357,7 +357,7 @@ static int max14577_muic_jig_handler(struct max14577_muic_info *info,
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
+ extcon_set_state_sync(info->edev, EXTCON_JIG, attached);
return 0;
}
@@ -454,24 +454,24 @@ static int max14577_muic_chg_handler(struct max14577_muic_info *info)
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+ extcon_set_state_sync(info->edev, EXTCON_USB, attached);
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
attached);
break;
case MAX14577_CHARGER_TYPE_DEDICATED_CHG:
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
attached);
break;
case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT:
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
attached);
break;
case MAX14577_CHARGER_TYPE_SPECIAL_500MA:
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
attached);
break;
case MAX14577_CHARGER_TYPE_SPECIAL_1A:
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
attached);
break;
case MAX14577_CHARGER_TYPE_NONE:
@@ -791,6 +791,6 @@ static struct platform_driver max14577_muic_driver = {
module_platform_driver(max14577_muic_driver);
MODULE_DESCRIPTION("Maxim 14577/77836 Extcon driver");
-MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>, Krzysztof Kozlowski <k.kozlowski@samsung.com>");
+MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>, Krzysztof Kozlowski <krzk@kernel.org>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:extcon-max14577");
diff --git a/drivers/extcon/extcon-max3355.c b/drivers/extcon/extcon-max3355.c
index c24abec5d06c..533e16a952b8 100644
--- a/drivers/extcon/extcon-max3355.c
+++ b/drivers/extcon/extcon-max3355.c
@@ -39,16 +39,16 @@ static irqreturn_t max3355_id_irq(int irq, void *dev_id)
* As we don't have event for USB peripheral cable attached,
* we simulate USB peripheral attach here.
*/
- extcon_set_cable_state_(data->edev, EXTCON_USB_HOST, false);
- extcon_set_cable_state_(data->edev, EXTCON_USB, true);
+ extcon_set_state_sync(data->edev, EXTCON_USB_HOST, false);
+ extcon_set_state_sync(data->edev, EXTCON_USB, true);
} else {
/*
* ID = 0 means USB HOST cable attached.
* As we don't have event for USB peripheral cable detached,
* we simulate USB peripheral detach here.
*/
- extcon_set_cable_state_(data->edev, EXTCON_USB, false);
- extcon_set_cable_state_(data->edev, EXTCON_USB_HOST, true);
+ extcon_set_state_sync(data->edev, EXTCON_USB, false);
+ extcon_set_state_sync(data->edev, EXTCON_USB_HOST, true);
}
return IRQ_HANDLED;
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index f17cb76b567c..68dbcb814b2f 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -505,8 +505,8 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_DOCK, attached);
- extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
+ extcon_set_state_sync(info->edev, EXTCON_DOCK, attached);
+ extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
goto out;
case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE: /* Dock-Desk */
dock_id = EXTCON_DOCK;
@@ -514,8 +514,8 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: /* Dock-Audio */
dock_id = EXTCON_DOCK;
if (!attached) {
- extcon_set_cable_state_(info->edev, EXTCON_USB, false);
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+ extcon_set_state_sync(info->edev, EXTCON_USB, false);
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
false);
}
break;
@@ -530,7 +530,7 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
attached);
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, dock_id, attached);
+ extcon_set_state_sync(info->edev, dock_id, attached);
out:
return 0;
@@ -596,7 +596,7 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
attached);
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
+ extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
break;
case MAX77693_MUIC_GND_AV_CABLE_LOAD:
/* Audio Video Cable with load, PATH:AUDIO */
@@ -604,14 +604,14 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
attached);
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+ extcon_set_state_sync(info->edev, EXTCON_USB, attached);
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
attached);
break;
case MAX77693_MUIC_GND_MHL:
case MAX77693_MUIC_GND_MHL_VB:
/* MHL or MHL with USB/TA cable */
- extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
+ extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
break;
default:
dev_err(info->dev, "failed to detect %s cable of gnd type\n",
@@ -653,7 +653,7 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info,
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
+ extcon_set_state_sync(info->edev, EXTCON_JIG, attached);
return 0;
}
@@ -807,10 +807,10 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
* - Support charging through micro-usb port without
* data connection
*/
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
attached);
if (!cable_attached)
- extcon_set_cable_state_(info->edev,
+ extcon_set_state_sync(info->edev,
EXTCON_DISP_MHL, cable_attached);
break;
}
@@ -834,13 +834,13 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
* - Support charging through micro-usb port without
* data connection.
*/
- extcon_set_cable_state_(info->edev, EXTCON_USB,
+ extcon_set_state_sync(info->edev, EXTCON_USB,
attached);
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
attached);
if (!cable_attached)
- extcon_set_cable_state_(info->edev, EXTCON_DOCK,
+ extcon_set_state_sync(info->edev, EXTCON_DOCK,
cable_attached);
break;
case MAX77693_MUIC_ADC_RESERVED_ACC_3: /* Dock-Smart */
@@ -869,9 +869,9 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_DOCK,
+ extcon_set_state_sync(info->edev, EXTCON_DOCK,
attached);
- extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL,
+ extcon_set_state_sync(info->edev, EXTCON_DISP_MHL,
attached);
break;
}
@@ -905,28 +905,28 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_USB,
+ extcon_set_state_sync(info->edev, EXTCON_USB,
attached);
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
attached);
break;
case MAX77693_CHARGER_TYPE_DEDICATED_CHG:
/* Only TA cable */
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
attached);
break;
}
break;
case MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT:
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
attached);
break;
case MAX77693_CHARGER_TYPE_APPLE_500MA:
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
attached);
break;
case MAX77693_CHARGER_TYPE_APPLE_1A_2A:
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
attached);
break;
case MAX77693_CHARGER_TYPE_DEAD_BATTERY:
diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c
index b188bd650efa..5d11fdf36e94 100644
--- a/drivers/extcon/extcon-max77843.c
+++ b/drivers/extcon/extcon-max77843.c
@@ -346,7 +346,7 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
+ extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
break;
case MAX77843_MUIC_GND_MHL_VB:
case MAX77843_MUIC_GND_MHL:
@@ -356,7 +356,7 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
+ extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
break;
default:
dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n",
@@ -392,7 +392,7 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info,
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
+ extcon_set_state_sync(info->edev, EXTCON_JIG, attached);
return 0;
}
@@ -486,8 +486,8 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+ extcon_set_state_sync(info->edev, EXTCON_USB, attached);
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
attached);
break;
case MAX77843_MUIC_CHG_DOWNSTREAM:
@@ -497,7 +497,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
attached);
break;
case MAX77843_MUIC_CHG_DEDICATED:
@@ -507,7 +507,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
attached);
break;
case MAX77843_MUIC_CHG_SPECIAL_500MA:
@@ -517,7 +517,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
attached);
break;
case MAX77843_MUIC_CHG_SPECIAL_1A:
@@ -527,7 +527,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
if (ret < 0)
return ret;
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
attached);
break;
case MAX77843_MUIC_CHG_GND:
@@ -536,10 +536,10 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
/* Charger cable on MHL accessory is attach or detach */
if (gnd_type == MAX77843_MUIC_GND_MHL_VB)
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
true);
else if (gnd_type == MAX77843_MUIC_GND_MHL)
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
false);
break;
case MAX77843_MUIC_CHG_NONE:
diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c
index 9a89320d09a8..4a0612fb9c07 100644
--- a/drivers/extcon/extcon-max8997.c
+++ b/drivers/extcon/extcon-max8997.c
@@ -331,11 +331,11 @@ static int max8997_muic_handle_usb(struct max8997_muic_info *info,
switch (usb_type) {
case MAX8997_USB_HOST:
- extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
+ extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
break;
case MAX8997_USB_DEVICE:
- extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+ extcon_set_state_sync(info->edev, EXTCON_USB, attached);
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
attached);
break;
default:
@@ -361,7 +361,7 @@ static int max8997_muic_handle_dock(struct max8997_muic_info *info,
switch (cable_type) {
case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD:
case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON:
- extcon_set_cable_state_(info->edev, EXTCON_DOCK, attached);
+ extcon_set_state_sync(info->edev, EXTCON_DOCK, attached);
break;
default:
dev_err(info->dev, "failed to detect %s dock device\n",
@@ -384,7 +384,7 @@ static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info,
return ret;
}
- extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
+ extcon_set_state_sync(info->edev, EXTCON_JIG, attached);
return 0;
}
@@ -406,7 +406,7 @@ static int max8997_muic_adc_handler(struct max8997_muic_info *info)
return ret;
break;
case MAX8997_MUIC_ADC_MHL:
- extcon_set_cable_state_(info->edev, EXTCON_DISP_MHL, attached);
+ extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
break;
case MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF:
case MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON:
@@ -489,19 +489,19 @@ static int max8997_muic_chg_handler(struct max8997_muic_info *info)
}
break;
case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT:
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_CDP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP,
attached);
break;
case MAX8997_CHARGER_TYPE_DEDICATED_CHG:
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_DCP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
attached);
break;
case MAX8997_CHARGER_TYPE_500MA:
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SLOW,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW,
attached);
break;
case MAX8997_CHARGER_TYPE_1A:
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_FAST,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST,
attached);
break;
default:
diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
index caff46c0e214..634ba70782de 100644
--- a/drivers/extcon/extcon-palmas.c
+++ b/drivers/extcon/extcon-palmas.c
@@ -61,7 +61,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
if (vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS) {
if (palmas_usb->linkstat != PALMAS_USB_STATE_VBUS) {
palmas_usb->linkstat = PALMAS_USB_STATE_VBUS;
- extcon_set_cable_state_(edev, EXTCON_USB, true);
+ extcon_set_state_sync(edev, EXTCON_USB, true);
dev_info(palmas_usb->dev, "USB cable is attached\n");
} else {
dev_dbg(palmas_usb->dev,
@@ -70,7 +70,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
} else if (!(vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS)) {
if (palmas_usb->linkstat == PALMAS_USB_STATE_VBUS) {
palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
- extcon_set_cable_state_(edev, EXTCON_USB, false);
+ extcon_set_state_sync(edev, EXTCON_USB, false);
dev_info(palmas_usb->dev, "USB cable is detached\n");
} else {
dev_dbg(palmas_usb->dev,
@@ -98,7 +98,7 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
PALMAS_USB_ID_INT_LATCH_CLR,
PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND);
palmas_usb->linkstat = PALMAS_USB_STATE_ID;
- extcon_set_cable_state_(edev, EXTCON_USB_HOST, true);
+ extcon_set_state_sync(edev, EXTCON_USB_HOST, true);
dev_info(palmas_usb->dev, "USB-HOST cable is attached\n");
} else if ((set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) &&
(id_src & PALMAS_USB_ID_INT_SRC_ID_FLOAT)) {
@@ -106,17 +106,17 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
PALMAS_USB_ID_INT_LATCH_CLR,
PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT);
palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
- extcon_set_cable_state_(edev, EXTCON_USB_HOST, false);
+ extcon_set_state_sync(edev, EXTCON_USB_HOST, false);
dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
} else if ((palmas_usb->linkstat == PALMAS_USB_STATE_ID) &&
(!(set & PALMAS_USB_ID_INT_SRC_ID_GND))) {
palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
- extcon_set_cable_state_(edev, EXTCON_USB_HOST, false);
+ extcon_set_state_sync(edev, EXTCON_USB_HOST, false);
dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
} else if ((palmas_usb->linkstat == PALMAS_USB_STATE_DISCONNECT) &&
(id_src & PALMAS_USB_ID_INT_SRC_ID_GND)) {
palmas_usb->linkstat = PALMAS_USB_STATE_ID;
- extcon_set_cable_state_(edev, EXTCON_USB_HOST, true);
+ extcon_set_state_sync(edev, EXTCON_USB_HOST, true);
dev_info(palmas_usb->dev, " USB-HOST cable is attached\n");
}
@@ -137,10 +137,10 @@ static void palmas_gpio_id_detect(struct work_struct *work)
id = gpiod_get_value_cansleep(palmas_usb->id_gpiod);
if (id) {
- extcon_set_cable_state_(edev, EXTCON_USB_HOST, false);
+ extcon_set_state_sync(edev, EXTCON_USB_HOST, false);
dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
} else {
- extcon_set_cable_state_(edev, EXTCON_USB_HOST, true);
+ extcon_set_state_sync(edev, EXTCON_USB_HOST, true);
dev_info(palmas_usb->dev, "USB-HOST cable is attached\n");
}
}
diff --git a/drivers/extcon/extcon-qcom-spmi-misc.c b/drivers/extcon/extcon-qcom-spmi-misc.c
new file mode 100644
index 000000000000..ca957a5f4291
--- /dev/null
+++ b/drivers/extcon/extcon-qcom-spmi-misc.c
@@ -0,0 +1,170 @@
+/**
+ * extcon-qcom-spmi-misc.c - Qualcomm USB extcon driver to support USB ID
+ * detection based on extcon-usb-gpio.c.
+ *
+ * Copyright (C) 2016 Linaro, Ltd.
+ * Stephen Boyd <stephen.boyd@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/extcon.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#define USB_ID_DEBOUNCE_MS 5 /* ms */
+
+struct qcom_usb_extcon_info {
+ struct extcon_dev *edev;
+ int irq;
+ struct delayed_work wq_detcable;
+ unsigned long debounce_jiffies;
+};
+
+static const unsigned int qcom_usb_extcon_cable[] = {
+ EXTCON_USB_HOST,
+ EXTCON_NONE,
+};
+
+static void qcom_usb_extcon_detect_cable(struct work_struct *work)
+{
+ bool id;
+ int ret;
+ struct qcom_usb_extcon_info *info = container_of(to_delayed_work(work),
+ struct qcom_usb_extcon_info,
+ wq_detcable);
+
+ /* check ID and update cable state */
+ ret = irq_get_irqchip_state(info->irq, IRQCHIP_STATE_LINE_LEVEL, &id);
+ if (ret)
+ return;
+
+ extcon_set_state(info->edev, EXTCON_USB_HOST, !id);
+}
+
+static irqreturn_t qcom_usb_irq_handler(int irq, void *dev_id)
+{
+ struct qcom_usb_extcon_info *info = dev_id;
+
+ queue_delayed_work(system_power_efficient_wq, &info->wq_detcable,
+ info->debounce_jiffies);
+
+ return IRQ_HANDLED;
+}
+
+static int qcom_usb_extcon_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct qcom_usb_extcon_info *info;
+ int ret;
+
+ info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->edev = devm_extcon_dev_allocate(dev, qcom_usb_extcon_cable);
+ if (IS_ERR(info->edev)) {
+ dev_err(dev, "failed to allocate extcon device\n");
+ return -ENOMEM;
+ }
+
+ ret = devm_extcon_dev_register(dev, info->edev);
+ if (ret < 0) {
+ dev_err(dev, "failed to register extcon device\n");
+ return ret;
+ }
+
+ info->debounce_jiffies = msecs_to_jiffies(USB_ID_DEBOUNCE_MS);
+ INIT_DELAYED_WORK(&info->wq_detcable, qcom_usb_extcon_detect_cable);
+
+ info->irq = platform_get_irq_byname(pdev, "usb_id");
+ if (info->irq < 0)
+ return info->irq;
+
+ ret = devm_request_threaded_irq(dev, info->irq, NULL,
+ qcom_usb_irq_handler,
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ pdev->name, info);
+ if (ret < 0) {
+ dev_err(dev, "failed to request handler for ID IRQ\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, info);
+ device_init_wakeup(dev, 1);
+
+ /* Perform initial detection */
+ qcom_usb_extcon_detect_cable(&info->wq_detcable.work);
+
+ return 0;
+}
+
+static int qcom_usb_extcon_remove(struct platform_device *pdev)
+{
+ struct qcom_usb_extcon_info *info = platform_get_drvdata(pdev);
+
+ cancel_delayed_work_sync(&info->wq_detcable);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int qcom_usb_extcon_suspend(struct device *dev)
+{
+ struct qcom_usb_extcon_info *info = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (device_may_wakeup(dev))
+ ret = enable_irq_wake(info->irq);
+
+ return ret;
+}
+
+static int qcom_usb_extcon_resume(struct device *dev)
+{
+ struct qcom_usb_extcon_info *info = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (device_may_wakeup(dev))
+ ret = disable_irq_wake(info->irq);
+
+ return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(qcom_usb_extcon_pm_ops,
+ qcom_usb_extcon_suspend, qcom_usb_extcon_resume);
+
+static const struct of_device_id qcom_usb_extcon_dt_match[] = {
+ { .compatible = "qcom,pm8941-misc", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qcom_usb_extcon_dt_match);
+
+static struct platform_driver qcom_usb_extcon_driver = {
+ .probe = qcom_usb_extcon_probe,
+ .remove = qcom_usb_extcon_remove,
+ .driver = {
+ .name = "extcon-pm8941-misc",
+ .pm = &qcom_usb_extcon_pm_ops,
+ .of_match_table = qcom_usb_extcon_dt_match,
+ },
+};
+module_platform_driver(qcom_usb_extcon_driver);
+
+MODULE_DESCRIPTION("QCOM USB ID extcon driver");
+MODULE_AUTHOR("Stephen Boyd <stephen.boyd@linaro.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/extcon/extcon-rt8973a.c b/drivers/extcon/extcon-rt8973a.c
index 97e074d70eca..174c388739ea 100644
--- a/drivers/extcon/extcon-rt8973a.c
+++ b/drivers/extcon/extcon-rt8973a.c
@@ -398,9 +398,9 @@ static int rt8973a_muic_cable_handler(struct rt8973a_muic_info *info,
return ret;
/* Change the state of external accessory */
- extcon_set_cable_state_(info->edev, id, attached);
+ extcon_set_state_sync(info->edev, id, attached);
if (id == EXTCON_USB)
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
attached);
return 0;
diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c
index df769a17e736..b22325688503 100644
--- a/drivers/extcon/extcon-sm5502.c
+++ b/drivers/extcon/extcon-sm5502.c
@@ -411,9 +411,9 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info,
return ret;
/* Change the state of external accessory */
- extcon_set_cable_state_(info->edev, id, attached);
+ extcon_set_state_sync(info->edev, id, attached);
if (id == EXTCON_USB)
- extcon_set_cable_state_(info->edev, EXTCON_CHG_USB_SDP,
+ extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
attached);
return 0;
diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c
index 2512660dc4b9..a27d350f69e3 100644
--- a/drivers/extcon/extcon-usb-gpio.c
+++ b/drivers/extcon/extcon-usb-gpio.c
@@ -63,16 +63,16 @@ static void usb_extcon_detect_cable(struct work_struct *work)
* As we don't have event for USB peripheral cable attached,
* we simulate USB peripheral attach here.
*/
- extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, false);
- extcon_set_cable_state_(info->edev, EXTCON_USB, true);
+ extcon_set_state_sync(info->edev, EXTCON_USB_HOST, false);
+ extcon_set_state_sync(info->edev, EXTCON_USB, true);
} else {
/*
* ID = 0 means USB HOST cable attached.
* As we don't have event for USB peripheral cable detached,
* we simulate USB peripheral detach here.
*/
- extcon_set_cable_state_(info->edev, EXTCON_USB, false);
- extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, true);
+ extcon_set_state_sync(info->edev, EXTCON_USB, false);
+ extcon_set_state_sync(info->edev, EXTCON_USB_HOST, true);
}
}
diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index 8682efc0f57b..78298460d168 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -38,43 +38,159 @@
#define SUPPORTED_CABLE_MAX 32
#define CABLE_NAME_MAX 30
-static const char *extcon_name[] = {
- [EXTCON_NONE] = "NONE",
+struct __extcon_info {
+ unsigned int type;
+ unsigned int id;
+ const char *name;
+
+} extcon_info[] = {
+ [EXTCON_NONE] = {
+ .type = EXTCON_TYPE_MISC,
+ .id = EXTCON_NONE,
+ .name = "NONE",
+ },
/* USB external connector */
- [EXTCON_USB] = "USB",
- [EXTCON_USB_HOST] = "USB-HOST",
+ [EXTCON_USB] = {
+ .type = EXTCON_TYPE_USB,
+ .id = EXTCON_USB,
+ .name = "USB",
+ },
+ [EXTCON_USB_HOST] = {
+ .type = EXTCON_TYPE_USB,
+ .id = EXTCON_USB_HOST,
+ .name = "USB_HOST",
+ },
/* Charging external connector */
- [EXTCON_CHG_USB_SDP] = "SDP",
- [EXTCON_CHG_USB_DCP] = "DCP",
- [EXTCON_CHG_USB_CDP] = "CDP",
- [EXTCON_CHG_USB_ACA] = "ACA",
- [EXTCON_CHG_USB_FAST] = "FAST-CHARGER",
- [EXTCON_CHG_USB_SLOW] = "SLOW-CHARGER",
+ [EXTCON_CHG_USB_SDP] = {
+ .type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+ .id = EXTCON_CHG_USB_SDP,
+ .name = "SDP",
+ },
+ [EXTCON_CHG_USB_DCP] = {
+ .type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+ .id = EXTCON_CHG_USB_DCP,
+ .name = "DCP",
+ },
+ [EXTCON_CHG_USB_CDP] = {
+ .type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+ .id = EXTCON_CHG_USB_CDP,
+ .name = "CDP",
+ },
+ [EXTCON_CHG_USB_ACA] = {
+ .type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+ .id = EXTCON_CHG_USB_ACA,
+ .name = "ACA",
+ },
+ [EXTCON_CHG_USB_FAST] = {
+ .type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+ .id = EXTCON_CHG_USB_FAST,
+ .name = "FAST-CHARGER",
+ },
+ [EXTCON_CHG_USB_SLOW] = {
+ .type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+ .id = EXTCON_CHG_USB_SLOW,
+ .name = "SLOW-CHARGER",
+ },
+ [EXTCON_CHG_WPT] = {
+ .type = EXTCON_TYPE_CHG,
+ .id = EXTCON_CHG_WPT,
+ .name = "WPT",
+ },
/* Jack external connector */
- [EXTCON_JACK_MICROPHONE] = "MICROPHONE",
- [EXTCON_JACK_HEADPHONE] = "HEADPHONE",
- [EXTCON_JACK_LINE_IN] = "LINE-IN",
- [EXTCON_JACK_LINE_OUT] = "LINE-OUT",
- [EXTCON_JACK_VIDEO_IN] = "VIDEO-IN",
- [EXTCON_JACK_VIDEO_OUT] = "VIDEO-OUT",
- [EXTCON_JACK_SPDIF_IN] = "SPDIF-IN",
- [EXTCON_JACK_SPDIF_OUT] = "SPDIF-OUT",
+ [EXTCON_JACK_MICROPHONE] = {
+ .type = EXTCON_TYPE_JACK,
+ .id = EXTCON_JACK_MICROPHONE,
+ .name = "MICROPHONE",
+ },
+ [EXTCON_JACK_HEADPHONE] = {
+ .type = EXTCON_TYPE_JACK,
+ .id = EXTCON_JACK_HEADPHONE,
+ .name = "HEADPHONE",
+ },
+ [EXTCON_JACK_LINE_IN] = {
+ .type = EXTCON_TYPE_JACK,
+ .id = EXTCON_JACK_LINE_IN,
+ .name = "LINE-IN",
+ },
+ [EXTCON_JACK_LINE_OUT] = {
+ .type = EXTCON_TYPE_JACK,
+ .id = EXTCON_JACK_LINE_OUT,
+ .name = "LINE-OUT",
+ },
+ [EXTCON_JACK_VIDEO_IN] = {
+ .type = EXTCON_TYPE_JACK,
+ .id = EXTCON_JACK_VIDEO_IN,
+ .name = "VIDEO-IN",
+ },
+ [EXTCON_JACK_VIDEO_OUT] = {
+ .type = EXTCON_TYPE_JACK,
+ .id = EXTCON_JACK_VIDEO_OUT,
+ .name = "VIDEO-OUT",
+ },
+ [EXTCON_JACK_SPDIF_IN] = {
+ .type = EXTCON_TYPE_JACK,
+ .id = EXTCON_JACK_SPDIF_IN,
+ .name = "SPDIF-IN",
+ },
+ [EXTCON_JACK_SPDIF_OUT] = {
+ .type = EXTCON_TYPE_JACK,
+ .id = EXTCON_JACK_SPDIF_OUT,
+ .name = "SPDIF-OUT",
+ },
/* Display external connector */
- [EXTCON_DISP_HDMI] = "HDMI",
- [EXTCON_DISP_MHL] = "MHL",
- [EXTCON_DISP_DVI] = "DVI",
- [EXTCON_DISP_VGA] = "VGA",
+ [EXTCON_DISP_HDMI] = {
+ .type = EXTCON_TYPE_DISP,
+ .id = EXTCON_DISP_HDMI,
+ .name = "HDMI",
+ },
+ [EXTCON_DISP_MHL] = {
+ .type = EXTCON_TYPE_DISP,
+ .id = EXTCON_DISP_MHL,
+ .name = "MHL",
+ },
+ [EXTCON_DISP_DVI] = {
+ .type = EXTCON_TYPE_DISP,
+ .id = EXTCON_DISP_DVI,
+ .name = "DVI",
+ },
+ [EXTCON_DISP_VGA] = {
+ .type = EXTCON_TYPE_DISP,
+ .id = EXTCON_DISP_VGA,
+ .name = "VGA",
+ },
+ [EXTCON_DISP_DP] = {
+ .type = EXTCON_TYPE_DISP | EXTCON_TYPE_USB,
+ .id = EXTCON_DISP_DP,
+ .name = "DP",
+ },
+ [EXTCON_DISP_HMD] = {
+ .type = EXTCON_TYPE_DISP | EXTCON_TYPE_USB,
+ .id = EXTCON_DISP_HMD,
+ .name = "HMD",
+ },
/* Miscellaneous external connector */
- [EXTCON_DOCK] = "DOCK",
- [EXTCON_JIG] = "JIG",
- [EXTCON_MECHANICAL] = "MECHANICAL",
-
- NULL,
+ [EXTCON_DOCK] = {
+ .type = EXTCON_TYPE_MISC,
+ .id = EXTCON_DOCK,
+ .name = "DOCK",
+ },
+ [EXTCON_JIG] = {
+ .type = EXTCON_TYPE_MISC,
+ .id = EXTCON_JIG,
+ .name = "JIG",
+ },
+ [EXTCON_MECHANICAL] = {
+ .type = EXTCON_TYPE_MISC,
+ .id = EXTCON_MECHANICAL,
+ .name = "MECHANICAL",
+ },
+
+ { /* sentinel */ }
};
/**
@@ -95,6 +211,16 @@ struct extcon_cable {
struct device_attribute attr_state;
struct attribute *attrs[3]; /* to be fed to attr_g.attrs */
+
+ union extcon_property_value usb_propval[EXTCON_PROP_USB_CNT];
+ union extcon_property_value chg_propval[EXTCON_PROP_CHG_CNT];
+ union extcon_property_value jack_propval[EXTCON_PROP_JACK_CNT];
+ union extcon_property_value disp_propval[EXTCON_PROP_DISP_CNT];
+
+ unsigned long usb_bits[BITS_TO_LONGS(EXTCON_PROP_USB_CNT)];
+ unsigned long chg_bits[BITS_TO_LONGS(EXTCON_PROP_CHG_CNT)];
+ unsigned long jack_bits[BITS_TO_LONGS(EXTCON_PROP_JACK_CNT)];
+ unsigned long disp_bits[BITS_TO_LONGS(EXTCON_PROP_DISP_CNT)];
};
static struct class *extcon_class;
@@ -147,14 +273,93 @@ static int find_cable_index_by_id(struct extcon_dev *edev, const unsigned int id
return -EINVAL;
}
-static bool is_extcon_changed(u32 prev, u32 new, int idx, bool *attached)
+static int get_extcon_type(unsigned int prop)
{
- if (((prev >> idx) & 0x1) != ((new >> idx) & 0x1)) {
- *attached = ((new >> idx) & 0x1) ? true : false;
- return true;
+ switch (prop) {
+ case EXTCON_PROP_USB_MIN ... EXTCON_PROP_USB_MAX:
+ return EXTCON_TYPE_USB;
+ case EXTCON_PROP_CHG_MIN ... EXTCON_PROP_CHG_MAX:
+ return EXTCON_TYPE_CHG;
+ case EXTCON_PROP_JACK_MIN ... EXTCON_PROP_JACK_MAX:
+ return EXTCON_TYPE_JACK;
+ case EXTCON_PROP_DISP_MIN ... EXTCON_PROP_DISP_MAX:
+ return EXTCON_TYPE_DISP;
+ default:
+ return -EINVAL;
}
+}
+
+static bool is_extcon_attached(struct extcon_dev *edev, unsigned int index)
+{
+ return !!(edev->state & BIT(index));
+}
+
+static bool is_extcon_changed(struct extcon_dev *edev, int index,
+ bool new_state)
+{
+ int state = !!(edev->state & BIT(index));
+ return (state != new_state);
+}
+
+static bool is_extcon_property_supported(unsigned int id, unsigned int prop)
+{
+ int type;
+
+ /* Check whether the property is supported or not. */
+ type = get_extcon_type(prop);
+ if (type < 0)
+ return false;
- return false;
+ /* Check whether a specific extcon id supports the property or not. */
+ return !!(extcon_info[id].type & type);
+}
+
+static int is_extcon_property_capability(struct extcon_dev *edev,
+ unsigned int id, int index,unsigned int prop)
+{
+ struct extcon_cable *cable;
+ int type, ret;
+
+ /* Check whether the property is supported or not. */
+ type = get_extcon_type(prop);
+ if (type < 0)
+ return type;
+
+ cable = &edev->cables[index];
+
+ switch (type) {
+ case EXTCON_TYPE_USB:
+ ret = test_bit(prop - EXTCON_PROP_USB_MIN, cable->usb_bits);
+ break;
+ case EXTCON_TYPE_CHG:
+ ret = test_bit(prop - EXTCON_PROP_CHG_MIN, cable->chg_bits);
+ break;
+ case EXTCON_TYPE_JACK:
+ ret = test_bit(prop - EXTCON_PROP_JACK_MIN, cable->jack_bits);
+ break;
+ case EXTCON_TYPE_DISP:
+ ret = test_bit(prop - EXTCON_PROP_DISP_MIN, cable->disp_bits);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static void init_property(struct extcon_dev *edev, unsigned int id, int index)
+{
+ unsigned int type = extcon_info[id].type;
+ struct extcon_cable *cable = &edev->cables[index];
+
+ if (EXTCON_TYPE_USB & type)
+ memset(cable->usb_propval, 0, sizeof(cable->usb_propval));
+ if (EXTCON_TYPE_CHG & type)
+ memset(cable->chg_propval, 0, sizeof(cable->chg_propval));
+ if (EXTCON_TYPE_JACK & type)
+ memset(cable->jack_propval, 0, sizeof(cable->jack_propval));
+ if (EXTCON_TYPE_DISP & type)
+ memset(cable->disp_propval, 0, sizeof(cable->disp_propval));
}
static ssize_t state_show(struct device *dev, struct device_attribute *attr,
@@ -168,32 +373,13 @@ static ssize_t state_show(struct device *dev, struct device_attribute *attr,
for (i = 0; i < edev->max_supported; i++) {
count += sprintf(buf + count, "%s=%d\n",
- extcon_name[edev->supported_cable[i]],
+ extcon_info[edev->supported_cable[i]].name,
!!(edev->state & (1 << i)));
}
return count;
}
-
-static ssize_t state_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- u32 state;
- ssize_t ret = 0;
- struct extcon_dev *edev = dev_get_drvdata(dev);
-
- ret = sscanf(buf, "0x%x", &state);
- if (ret == 0)
- ret = -EINVAL;
- else
- ret = extcon_set_state(edev, state);
-
- if (ret < 0)
- return ret;
-
- return count;
-}
-static DEVICE_ATTR_RW(state);
+static DEVICE_ATTR_RO(state);
static ssize_t name_show(struct device *dev, struct device_attribute *attr,
char *buf)
@@ -212,7 +398,7 @@ static ssize_t cable_name_show(struct device *dev,
int i = cable->cable_index;
return sprintf(buf, "%s\n",
- extcon_name[cable->edev->supported_cable[i]]);
+ extcon_info[cable->edev->supported_cable[i]].name);
}
static ssize_t cable_state_show(struct device *dev,
@@ -224,26 +410,17 @@ static ssize_t cable_state_show(struct device *dev,
int i = cable->cable_index;
return sprintf(buf, "%d\n",
- extcon_get_cable_state_(cable->edev,
- cable->edev->supported_cable[i]));
+ extcon_get_state(cable->edev, cable->edev->supported_cable[i]));
}
/**
- * extcon_update_state() - Update the cable attach states of the extcon device
- * only for the masked bits.
- * @edev: the extcon device
- * @mask: the bit mask to designate updated bits.
- * @state: new cable attach status for @edev
- *
- * Changing the state sends uevent with environment variable containing
- * the name of extcon device (envp[0]) and the state output (envp[1]).
- * Tizen uses this format for extcon device to get events from ports.
- * Android uses this format as well.
+ * extcon_sync() - Synchronize the states for both the attached/detached
+ * @edev: the extcon device that has the cable.
*
- * Note that the notifier provides which bits are changed in the state
- * variable with the val parameter (second) to the callback.
+ * This function send a notification to synchronize the all states of a
+ * specific external connector
*/
-int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state)
+int extcon_sync(struct extcon_dev *edev, unsigned int id)
{
char name_buf[120];
char state_buf[120];
@@ -252,100 +429,102 @@ int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state)
int env_offset = 0;
int length;
int index;
+ int state;
unsigned long flags;
- bool attached;
if (!edev)
return -EINVAL;
- spin_lock_irqsave(&edev->lock, flags);
+ index = find_cable_index_by_id(edev, id);
+ if (index < 0)
+ return index;
- if (edev->state != ((edev->state & ~mask) | (state & mask))) {
- u32 old_state;
+ spin_lock_irqsave(&edev->lock, flags);
- if (check_mutually_exclusive(edev, (edev->state & ~mask) |
- (state & mask))) {
- spin_unlock_irqrestore(&edev->lock, flags);
- return -EPERM;
- }
+ state = !!(edev->state & BIT(index));
+ raw_notifier_call_chain(&edev->nh[index], state, edev);
- old_state = edev->state;
- edev->state &= ~mask;
- edev->state |= state & mask;
+ /* This could be in interrupt handler */
+ prop_buf = (char *)get_zeroed_page(GFP_ATOMIC);
+ if (!prop_buf) {
+ /* Unlock early before uevent */
+ spin_unlock_irqrestore(&edev->lock, flags);
- for (index = 0; index < edev->max_supported; index++) {
- if (is_extcon_changed(old_state, edev->state, index,
- &attached))
- raw_notifier_call_chain(&edev->nh[index],
- attached, edev);
- }
+ dev_err(&edev->dev, "out of memory in extcon_set_state\n");
+ kobject_uevent(&edev->dev.kobj, KOBJ_CHANGE);
- /* This could be in interrupt handler */
- prop_buf = (char *)get_zeroed_page(GFP_ATOMIC);
- if (prop_buf) {
- length = name_show(&edev->dev, NULL, prop_buf);
- if (length > 0) {
- if (prop_buf[length - 1] == '\n')
- prop_buf[length - 1] = 0;
- snprintf(name_buf, sizeof(name_buf),
- "NAME=%s", prop_buf);
- envp[env_offset++] = name_buf;
- }
- length = state_show(&edev->dev, NULL, prop_buf);
- if (length > 0) {
- if (prop_buf[length - 1] == '\n')
- prop_buf[length - 1] = 0;
- snprintf(state_buf, sizeof(state_buf),
- "STATE=%s", prop_buf);
- envp[env_offset++] = state_buf;
- }
- envp[env_offset] = NULL;
- /* Unlock early before uevent */
- spin_unlock_irqrestore(&edev->lock, flags);
+ return 0;
+ }
- kobject_uevent_env(&edev->dev.kobj, KOBJ_CHANGE, envp);
- free_page((unsigned long)prop_buf);
- } else {
- /* Unlock early before uevent */
- spin_unlock_irqrestore(&edev->lock, flags);
+ length = name_show(&edev->dev, NULL, prop_buf);
+ if (length > 0) {
+ if (prop_buf[length - 1] == '\n')
+ prop_buf[length - 1] = 0;
+ snprintf(name_buf, sizeof(name_buf), "NAME=%s", prop_buf);
+ envp[env_offset++] = name_buf;
+ }
- dev_err(&edev->dev, "out of memory in extcon_set_state\n");
- kobject_uevent(&edev->dev.kobj, KOBJ_CHANGE);
- }
- } else {
- /* No changes */
- spin_unlock_irqrestore(&edev->lock, flags);
+ length = state_show(&edev->dev, NULL, prop_buf);
+ if (length > 0) {
+ if (prop_buf[length - 1] == '\n')
+ prop_buf[length - 1] = 0;
+ snprintf(state_buf, sizeof(state_buf), "STATE=%s", prop_buf);
+ envp[env_offset++] = state_buf;
}
+ envp[env_offset] = NULL;
+
+ /* Unlock early before uevent */
+ spin_unlock_irqrestore(&edev->lock, flags);
+ kobject_uevent_env(&edev->dev.kobj, KOBJ_CHANGE, envp);
+ free_page((unsigned long)prop_buf);
return 0;
}
-EXPORT_SYMBOL_GPL(extcon_update_state);
+EXPORT_SYMBOL_GPL(extcon_sync);
/**
- * extcon_set_state() - Set the cable attach states of the extcon device.
- * @edev: the extcon device
- * @state: new cable attach status for @edev
- *
- * Note that notifier provides which bits are changed in the state
- * variable with the val parameter (second) to the callback.
+ * extcon_get_state() - Get the state of a external connector.
+ * @edev: the extcon device that has the cable.
+ * @id: the unique id of each external connector in extcon enumeration.
*/
-int extcon_set_state(struct extcon_dev *edev, u32 state)
+int extcon_get_state(struct extcon_dev *edev, const unsigned int id)
{
+ int index, state;
+ unsigned long flags;
+
if (!edev)
return -EINVAL;
- return extcon_update_state(edev, 0xffffffff, state);
+ index = find_cable_index_by_id(edev, id);
+ if (index < 0)
+ return index;
+
+ spin_lock_irqsave(&edev->lock, flags);
+ state = is_extcon_attached(edev, index);
+ spin_unlock_irqrestore(&edev->lock, flags);
+
+ return state;
}
-EXPORT_SYMBOL_GPL(extcon_set_state);
+EXPORT_SYMBOL_GPL(extcon_get_state);
/**
- * extcon_get_cable_state_() - Get the status of a specific cable.
- * @edev: the extcon device that has the cable.
- * @id: the unique id of each external connector in extcon enumeration.
+ * extcon_set_state() - Set the state of a external connector.
+ * without a notification.
+ * @edev: the extcon device that has the cable.
+ * @id: the unique id of each external connector
+ * in extcon enumeration.
+ * @state: the new cable status. The default semantics is
+ * true: attached / false: detached.
+ *
+ * This function only set the state of a external connector without
+ * a notification. To synchronize the data of a external connector,
+ * use extcon_set_state_sync() and extcon_sync().
*/
-int extcon_get_cable_state_(struct extcon_dev *edev, const unsigned int id)
+int extcon_set_state(struct extcon_dev *edev, unsigned int id,
+ bool cable_state)
{
- int index;
+ unsigned long flags;
+ int index, ret = 0;
if (!edev)
return -EINVAL;
@@ -354,41 +533,338 @@ int extcon_get_cable_state_(struct extcon_dev *edev, const unsigned int id)
if (index < 0)
return index;
- if (edev->max_supported && edev->max_supported <= index)
- return -EINVAL;
+ spin_lock_irqsave(&edev->lock, flags);
+
+ /* Check whether the external connector's state is changed. */
+ if (!is_extcon_changed(edev, index, cable_state))
+ goto out;
+
+ if (check_mutually_exclusive(edev,
+ (edev->state & ~BIT(index)) | (cable_state & BIT(index)))) {
+ ret = -EPERM;
+ goto out;
+ }
+
+ /*
+ * Initialize the value of extcon property before setting
+ * the detached state for an external connector.
+ */
+ if (!cable_state)
+ init_property(edev, id, index);
+
+ /* Update the state for a external connector. */
+ if (cable_state)
+ edev->state |= BIT(index);
+ else
+ edev->state &= ~(BIT(index));
+out:
+ spin_unlock_irqrestore(&edev->lock, flags);
- return !!(edev->state & (1 << index));
+ return ret;
}
-EXPORT_SYMBOL_GPL(extcon_get_cable_state_);
+EXPORT_SYMBOL_GPL(extcon_set_state);
/**
- * extcon_set_cable_state_() - Set the status of a specific cable.
+ * extcon_set_state_sync() - Set the state of a external connector
+ * with a notification.
* @edev: the extcon device that has the cable.
* @id: the unique id of each external connector
* in extcon enumeration.
* @state: the new cable status. The default semantics is
* true: attached / false: detached.
+ *
+ * This function set the state of external connector and synchronize the data
+ * by usning a notification.
*/
-int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id,
+int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
bool cable_state)
{
- u32 state;
+ int ret, index;
+ unsigned long flags;
+
+ index = find_cable_index_by_id(edev, id);
+ if (index < 0)
+ return index;
+
+ /* Check whether the external connector's state is changed. */
+ spin_lock_irqsave(&edev->lock, flags);
+ ret = is_extcon_changed(edev, index, cable_state);
+ spin_unlock_irqrestore(&edev->lock, flags);
+ if (!ret)
+ return 0;
+
+ ret = extcon_set_state(edev, id, cable_state);
+ if (ret < 0)
+ return ret;
+
+ return extcon_sync(edev, id);
+}
+EXPORT_SYMBOL_GPL(extcon_set_state_sync);
+
+/**
+ * extcon_get_property() - Get the property value of a specific cable.
+ * @edev: the extcon device that has the cable.
+ * @id: the unique id of each external connector
+ * in extcon enumeration.
+ * @prop: the property id among enum extcon_property.
+ * @prop_val: the pointer which store the value of property.
+ *
+ * When getting the property value of external connector, the external connector
+ * should be attached. If detached state, function just return 0 without
+ * property value. Also, the each property should be included in the list of
+ * supported properties according to the type of external connectors.
+ *
+ * Returns 0 if success or error number if fail
+ */
+int extcon_get_property(struct extcon_dev *edev, unsigned int id,
+ unsigned int prop,
+ union extcon_property_value *prop_val)
+{
+ struct extcon_cable *cable;
+ unsigned long flags;
+ int index, ret = 0;
+
+ *prop_val = (union extcon_property_value)(0);
+
+ if (!edev)
+ return -EINVAL;
+
+ /* Check whether the property is supported or not */
+ if (!is_extcon_property_supported(id, prop))
+ return -EINVAL;
+
+ /* Find the cable index of external connector by using id */
+ index = find_cable_index_by_id(edev, id);
+ if (index < 0)
+ return index;
+
+ spin_lock_irqsave(&edev->lock, flags);
+
+ /* Check whether the property is available or not. */
+ if (!is_extcon_property_capability(edev, id, index, prop)) {
+ spin_unlock_irqrestore(&edev->lock, flags);
+ return -EPERM;
+ }
+
+ /*
+ * Check whether the external connector is attached.
+ * If external connector is detached, the user can not
+ * get the property value.
+ */
+ if (!is_extcon_attached(edev, index)) {
+ spin_unlock_irqrestore(&edev->lock, flags);
+ return 0;
+ }
+
+ cable = &edev->cables[index];
+
+ /* Get the property value according to extcon type */
+ switch (prop) {
+ case EXTCON_PROP_USB_MIN ... EXTCON_PROP_USB_MAX:
+ *prop_val = cable->usb_propval[prop - EXTCON_PROP_USB_MIN];
+ break;
+ case EXTCON_PROP_CHG_MIN ... EXTCON_PROP_CHG_MAX:
+ *prop_val = cable->chg_propval[prop - EXTCON_PROP_CHG_MIN];
+ break;
+ case EXTCON_PROP_JACK_MIN ... EXTCON_PROP_JACK_MAX:
+ *prop_val = cable->jack_propval[prop - EXTCON_PROP_JACK_MIN];
+ break;
+ case EXTCON_PROP_DISP_MIN ... EXTCON_PROP_DISP_MAX:
+ *prop_val = cable->disp_propval[prop - EXTCON_PROP_DISP_MIN];
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ spin_unlock_irqrestore(&edev->lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(extcon_get_property);
+
+/**
+ * extcon_set_property() - Set the property value of a specific cable.
+ * @edev: the extcon device that has the cable.
+ * @id: the unique id of each external connector
+ * in extcon enumeration.
+ * @prop: the property id among enum extcon_property.
+ * @prop_val: the pointer including the new value of property.
+ *
+ * The each property should be included in the list of supported properties
+ * according to the type of external connectors.
+ *
+ * Returns 0 if success or error number if fail
+ */
+int extcon_set_property(struct extcon_dev *edev, unsigned int id,
+ unsigned int prop,
+ union extcon_property_value prop_val)
+{
+ struct extcon_cable *cable;
+ unsigned long flags;
+ int index, ret = 0;
+
+ if (!edev)
+ return -EINVAL;
+
+ /* Check whether the property is supported or not */
+ if (!is_extcon_property_supported(id, prop))
+ return -EINVAL;
+
+ /* Find the cable index of external connector by using id */
+ index = find_cable_index_by_id(edev, id);
+ if (index < 0)
+ return index;
+
+ spin_lock_irqsave(&edev->lock, flags);
+
+ /* Check whether the property is available or not. */
+ if (!is_extcon_property_capability(edev, id, index, prop)) {
+ spin_unlock_irqrestore(&edev->lock, flags);
+ return -EPERM;
+ }
+
+ cable = &edev->cables[index];
+
+ /* Set the property value according to extcon type */
+ switch (prop) {
+ case EXTCON_PROP_USB_MIN ... EXTCON_PROP_USB_MAX:
+ cable->usb_propval[prop - EXTCON_PROP_USB_MIN] = prop_val;
+ break;
+ case EXTCON_PROP_CHG_MIN ... EXTCON_PROP_CHG_MAX:
+ cable->chg_propval[prop - EXTCON_PROP_CHG_MIN] = prop_val;
+ break;
+ case EXTCON_PROP_JACK_MIN ... EXTCON_PROP_JACK_MAX:
+ cable->jack_propval[prop - EXTCON_PROP_JACK_MIN] = prop_val;
+ break;
+ case EXTCON_PROP_DISP_MIN ... EXTCON_PROP_DISP_MAX:
+ cable->disp_propval[prop - EXTCON_PROP_DISP_MIN] = prop_val;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ spin_unlock_irqrestore(&edev->lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(extcon_set_property);
+
+/**
+ * extcon_set_property_sync() - Set the property value of a specific cable
+ with a notification.
+ * @prop_val: the pointer including the new value of property.
+ *
+ * When setting the property value of external connector, the external connector
+ * should be attached. The each property should be included in the list of
+ * supported properties according to the type of external connectors.
+ *
+ * Returns 0 if success or error number if fail
+ */
+int extcon_set_property_sync(struct extcon_dev *edev, unsigned int id,
+ unsigned int prop,
+ union extcon_property_value prop_val)
+{
+ int ret;
+
+ ret = extcon_set_property(edev, id, prop, prop_val);
+ if (ret < 0)
+ return ret;
+
+ return extcon_sync(edev, id);
+}
+EXPORT_SYMBOL_GPL(extcon_set_property_sync);
+
+/**
+ * extcon_get_property_capability() - Get the capability of property
+ * of an external connector.
+ * @edev: the extcon device that has the cable.
+ * @id: the unique id of each external connector
+ * in extcon enumeration.
+ * @prop: the property id among enum extcon_property.
+ *
+ * Returns 1 if the property is available or 0 if not available.
+ */
+int extcon_get_property_capability(struct extcon_dev *edev, unsigned int id,
+ unsigned int prop)
+{
int index;
if (!edev)
return -EINVAL;
+ /* Check whether the property is supported or not */
+ if (!is_extcon_property_supported(id, prop))
+ return -EINVAL;
+
+ /* Find the cable index of external connector by using id */
index = find_cable_index_by_id(edev, id);
if (index < 0)
return index;
- if (edev->max_supported && edev->max_supported <= index)
+ return is_extcon_property_capability(edev, id, index, prop);
+}
+EXPORT_SYMBOL_GPL(extcon_get_property_capability);
+
+/**
+ * extcon_set_property_capability() - Set the capability of a property
+ * of an external connector.
+ * @edev: the extcon device that has the cable.
+ * @id: the unique id of each external connector
+ * in extcon enumeration.
+ * @prop: the property id among enum extcon_property.
+ *
+ * This function set the capability of a property for an external connector
+ * to mark the bit in capability bitmap which mean the available state of
+ * a property.
+ *
+ * Returns 0 if success or error number if fail
+ */
+int extcon_set_property_capability(struct extcon_dev *edev, unsigned int id,
+ unsigned int prop)
+{
+ struct extcon_cable *cable;
+ int index, type, ret = 0;
+
+ if (!edev)
return -EINVAL;
- state = cable_state ? (1 << index) : 0;
- return extcon_update_state(edev, 1 << index, state);
+ /* Check whether the property is supported or not. */
+ if (!is_extcon_property_supported(id, prop))
+ return -EINVAL;
+
+ /* Find the cable index of external connector by using id. */
+ index = find_cable_index_by_id(edev, id);
+ if (index < 0)
+ return index;
+
+ type = get_extcon_type(prop);
+ if (type < 0)
+ return type;
+
+ cable = &edev->cables[index];
+
+ switch (type) {
+ case EXTCON_TYPE_USB:
+ __set_bit(prop - EXTCON_PROP_USB_MIN, cable->usb_bits);
+ break;
+ case EXTCON_TYPE_CHG:
+ __set_bit(prop - EXTCON_PROP_CHG_MIN, cable->chg_bits);
+ break;
+ case EXTCON_TYPE_JACK:
+ __set_bit(prop - EXTCON_PROP_JACK_MIN, cable->jack_bits);
+ break;
+ case EXTCON_TYPE_DISP:
+ __set_bit(prop - EXTCON_PROP_DISP_MIN, cable->disp_bits);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
}
-EXPORT_SYMBOL_GPL(extcon_set_cable_state_);
+EXPORT_SYMBOL_GPL(extcon_set_property_capability);
/**
* extcon_get_extcon_dev() - Get the extcon device instance from the name
@@ -428,7 +904,7 @@ int extcon_register_notifier(struct extcon_dev *edev, unsigned int id,
struct notifier_block *nb)
{
unsigned long flags;
- int ret, idx;
+ int ret, idx = -EINVAL;
if (!nb)
return -EINVAL;
@@ -846,13 +1322,13 @@ struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index)
return ERR_PTR(-EINVAL);
if (!dev->of_node) {
- dev_err(dev, "device does not have a device node entry\n");
+ dev_dbg(dev, "device does not have a device node entry\n");
return ERR_PTR(-EINVAL);
}
node = of_parse_phandle(dev->of_node, "extcon", index);
if (!node) {
- dev_err(dev, "failed to get phandle in %s node\n",
+ dev_dbg(dev, "failed to get phandle in %s node\n",
dev->of_node->full_name);
return ERR_PTR(-ENODEV);
}
diff --git a/drivers/media/dvb-frontends/rtl2832_sdr.c b/drivers/media/dvb-frontends/rtl2832_sdr.c
index 6e22af36b637..e038e886731b 100644
--- a/drivers/media/dvb-frontends/rtl2832_sdr.c
+++ b/drivers/media/dvb-frontends/rtl2832_sdr.c
@@ -392,7 +392,6 @@ static int rtl2832_sdr_alloc_urbs(struct rtl2832_sdr_dev *dev)
dev_dbg(&pdev->dev, "alloc urb=%d\n", i);
dev->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC);
if (!dev->urb_list[i]) {
- dev_dbg(&pdev->dev, "failed\n");
for (j = 0; j < i; j++)
usb_free_urb(dev->urb_list[j]);
return -ENOMEM;
diff --git a/drivers/media/radio/si470x/radio-si470x-usb.c b/drivers/media/radio/si470x/radio-si470x-usb.c
index 091d793f6583..4b132c29f290 100644
--- a/drivers/media/radio/si470x/radio-si470x-usb.c
+++ b/drivers/media/radio/si470x/radio-si470x-usb.c
@@ -627,7 +627,6 @@ static int si470x_usb_driver_probe(struct usb_interface *intf,
radio->int_in_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!radio->int_in_urb) {
- dev_info(&intf->dev, "could not allocate int_in_urb");
retval = -ENOMEM;
goto err_intbuffer;
}
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index 65f80b8b9f7a..86cc70fe2534 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -2211,16 +2211,11 @@ static struct imon_context *imon_init_intf0(struct usb_interface *intf,
goto exit;
}
rx_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!rx_urb) {
- dev_err(dev, "%s: usb_alloc_urb failed for IR urb", __func__);
+ if (!rx_urb)
goto rx_urb_alloc_failed;
- }
tx_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!tx_urb) {
- dev_err(dev, "%s: usb_alloc_urb failed for display urb",
- __func__);
+ if (!tx_urb)
goto tx_urb_alloc_failed;
- }
mutex_init(&ictx->lock);
spin_lock_init(&ictx->kc_lock);
@@ -2305,10 +2300,8 @@ static struct imon_context *imon_init_intf1(struct usb_interface *intf,
int ret = -ENOMEM;
rx_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!rx_urb) {
- pr_err("usb_alloc_urb failed for IR urb\n");
+ if (!rx_urb)
goto rx_urb_alloc_failed;
- }
mutex_lock(&ictx->lock);
diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c
index 399f44d89a29..ec8016d9b009 100644
--- a/drivers/media/rc/redrat3.c
+++ b/drivers/media/rc/redrat3.c
@@ -970,10 +970,8 @@ static int redrat3_dev_probe(struct usb_interface *intf,
/* set up bulk-in endpoint */
rr3->read_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!rr3->read_urb) {
- dev_err(dev, "Read urb allocation failure\n");
+ if (!rr3->read_urb)
goto error;
- }
rr3->ep_in = ep_in;
rr3->bulk_in_buf = usb_alloc_coherent(udev,
diff --git a/drivers/media/usb/airspy/airspy.c b/drivers/media/usb/airspy/airspy.c
index fe031b06935f..3c556ee306cd 100644
--- a/drivers/media/usb/airspy/airspy.c
+++ b/drivers/media/usb/airspy/airspy.c
@@ -426,7 +426,6 @@ static int airspy_alloc_urbs(struct airspy *s)
dev_dbg(s->dev, "alloc urb=%d\n", i);
s->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC);
if (!s->urb_list[i]) {
- dev_dbg(s->dev, "failed\n");
for (j = 0; j < i; j++)
usb_free_urb(s->urb_list[j]);
return -ENOMEM;
diff --git a/drivers/media/usb/as102/as102_usb_drv.c b/drivers/media/usb/as102/as102_usb_drv.c
index 0e8030c071b8..68c3a80ce349 100644
--- a/drivers/media/usb/as102/as102_usb_drv.c
+++ b/drivers/media/usb/as102/as102_usb_drv.c
@@ -270,8 +270,6 @@ static int as102_alloc_usb_stream_buffer(struct as102_dev_t *dev)
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (urb == NULL) {
- dev_dbg(&dev->bus_adap.usb_dev->dev,
- "%s: usb_alloc_urb failed\n", __func__);
as102_free_usb_stream_buffer(dev);
return -ENOMEM;
}
diff --git a/drivers/media/usb/au0828/au0828-video.c b/drivers/media/usb/au0828/au0828-video.c
index 82b026985868..13b8387082f2 100644
--- a/drivers/media/usb/au0828/au0828-video.c
+++ b/drivers/media/usb/au0828/au0828-video.c
@@ -245,7 +245,6 @@ static int au0828_init_isoc(struct au0828_dev *dev, int max_packets,
for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
urb = usb_alloc_urb(max_packets, GFP_KERNEL);
if (!urb) {
- au0828_isocdbg("cannot alloc isoc_ctl.urb %i\n", i);
au0828_uninit_isoc(dev);
return -ENOMEM;
}
diff --git a/drivers/media/usb/cpia2/cpia2_usb.c b/drivers/media/usb/cpia2/cpia2_usb.c
index c1aa1ab2ece9..13620cdf0599 100644
--- a/drivers/media/usb/cpia2/cpia2_usb.c
+++ b/drivers/media/usb/cpia2/cpia2_usb.c
@@ -662,7 +662,6 @@ static int submit_urbs(struct camera_data *cam)
}
urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL);
if (!urb) {
- ERR("%s: usb_alloc_urb error!\n", __func__);
for (j = 0; j < i; j++)
usb_free_urb(cam->sbuf[j].urb);
return -ENOMEM;
diff --git a/drivers/media/usb/cx231xx/cx231xx-audio.c b/drivers/media/usb/cx231xx/cx231xx-audio.c
index a6a9508418f8..4cd5fa91612f 100644
--- a/drivers/media/usb/cx231xx/cx231xx-audio.c
+++ b/drivers/media/usb/cx231xx/cx231xx-audio.c
@@ -293,7 +293,6 @@ static int cx231xx_init_audio_isoc(struct cx231xx *dev)
memset(dev->adev.transfer_buffer[i], 0x80, sb_size);
urb = usb_alloc_urb(CX231XX_ISO_NUM_AUDIO_PACKETS, GFP_ATOMIC);
if (!urb) {
- dev_err(dev->dev, "usb_alloc_urb failed!\n");
for (j = 0; j < i; j++) {
usb_free_urb(dev->adev.urb[j]);
kfree(dev->adev.transfer_buffer[j]);
@@ -355,7 +354,6 @@ static int cx231xx_init_audio_bulk(struct cx231xx *dev)
memset(dev->adev.transfer_buffer[i], 0x80, sb_size);
urb = usb_alloc_urb(CX231XX_NUM_AUDIO_PACKETS, GFP_ATOMIC);
if (!urb) {
- dev_err(dev->dev, "usb_alloc_urb failed!\n");
for (j = 0; j < i; j++) {
usb_free_urb(dev->adev.urb[j]);
kfree(dev->adev.transfer_buffer[j]);
diff --git a/drivers/media/usb/cx231xx/cx231xx-core.c b/drivers/media/usb/cx231xx/cx231xx-core.c
index 630f4fc5155f..8ec05cb306d8 100644
--- a/drivers/media/usb/cx231xx/cx231xx-core.c
+++ b/drivers/media/usb/cx231xx/cx231xx-core.c
@@ -1035,8 +1035,6 @@ int cx231xx_init_isoc(struct cx231xx *dev, int max_packets,
for (i = 0; i < dev->video_mode.isoc_ctl.num_bufs; i++) {
urb = usb_alloc_urb(max_packets, GFP_KERNEL);
if (!urb) {
- dev_err(dev->dev,
- "cannot alloc isoc_ctl.urb %i\n", i);
cx231xx_uninit_isoc(dev);
return -ENOMEM;
}
@@ -1172,8 +1170,6 @@ int cx231xx_init_bulk(struct cx231xx *dev, int max_packets,
for (i = 0; i < dev->video_mode.bulk_ctl.num_bufs; i++) {
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
- dev_err(dev->dev,
- "cannot alloc bulk_ctl.urb %i\n", i);
cx231xx_uninit_bulk(dev);
return -ENOMEM;
}
diff --git a/drivers/media/usb/cx231xx/cx231xx-vbi.c b/drivers/media/usb/cx231xx/cx231xx-vbi.c
index 15bb573b78ac..76e901920f6f 100644
--- a/drivers/media/usb/cx231xx/cx231xx-vbi.c
+++ b/drivers/media/usb/cx231xx/cx231xx-vbi.c
@@ -442,8 +442,6 @@ int cx231xx_init_vbi_isoc(struct cx231xx *dev, int max_packets,
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
- dev_err(dev->dev,
- "cannot alloc bulk_ctl.urb %i\n", i);
cx231xx_uninit_vbi_isoc(dev);
return -ENOMEM;
}
diff --git a/drivers/media/usb/dvb-usb/dib0700_core.c b/drivers/media/usb/dvb-usb/dib0700_core.c
index bf890c3d9cda..26797979ebce 100644
--- a/drivers/media/usb/dvb-usb/dib0700_core.c
+++ b/drivers/media/usb/dvb-usb/dib0700_core.c
@@ -783,10 +783,8 @@ int dib0700_rc_setup(struct dvb_usb_device *d, struct usb_interface *intf)
/* Starting in firmware 1.20, the RC info is provided on a bulk pipe */
purb = usb_alloc_urb(0, GFP_KERNEL);
- if (purb == NULL) {
- err("rc usb alloc urb failed");
+ if (purb == NULL)
return -ENOMEM;
- }
purb->transfer_buffer = kzalloc(RC_MSG_SIZE_V1_20, GFP_KERNEL);
if (purb->transfer_buffer == NULL) {
diff --git a/drivers/media/usb/em28xx/em28xx-audio.c b/drivers/media/usb/em28xx/em28xx-audio.c
index 49a5f9532bd8..78f3687772bf 100644
--- a/drivers/media/usb/em28xx/em28xx-audio.c
+++ b/drivers/media/usb/em28xx/em28xx-audio.c
@@ -850,7 +850,6 @@ static int em28xx_audio_urb_init(struct em28xx *dev)
urb = usb_alloc_urb(npackets, GFP_ATOMIC);
if (!urb) {
- em28xx_errdev("usb_alloc_urb failed!\n");
em28xx_audio_free_urb(dev);
return -ENOMEM;
}
diff --git a/drivers/media/usb/em28xx/em28xx-core.c b/drivers/media/usb/em28xx/em28xx-core.c
index 37456079f490..eebd5d7088d0 100644
--- a/drivers/media/usb/em28xx/em28xx-core.c
+++ b/drivers/media/usb/em28xx/em28xx-core.c
@@ -934,7 +934,6 @@ int em28xx_alloc_urbs(struct em28xx *dev, enum em28xx_mode mode, int xfer_bulk,
for (i = 0; i < usb_bufs->num_bufs; i++) {
urb = usb_alloc_urb(usb_bufs->num_packets, GFP_KERNEL);
if (!urb) {
- em28xx_err("cannot alloc usb_ctl.urb %i\n", i);
em28xx_uninit_usb_xfer(dev, mode);
return -ENOMEM;
}
diff --git a/drivers/media/usb/gspca/benq.c b/drivers/media/usb/gspca/benq.c
index 790baed33963..5fa67b78ad49 100644
--- a/drivers/media/usb/gspca/benq.c
+++ b/drivers/media/usb/gspca/benq.c
@@ -95,10 +95,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
#define SD_NPKT 32
for (n = 0; n < 4; n++) {
urb = usb_alloc_urb(SD_NPKT, GFP_KERNEL);
- if (!urb) {
- pr_err("usb_alloc_urb failed\n");
+ if (!urb)
return -ENOMEM;
- }
gspca_dev->urb[n] = urb;
urb->transfer_buffer = usb_alloc_coherent(gspca_dev->dev,
SD_PKT_SZ * SD_NPKT,
diff --git a/drivers/media/usb/gspca/gspca.c b/drivers/media/usb/gspca/gspca.c
index b17bd7ebcb47..af2395a76d8b 100644
--- a/drivers/media/usb/gspca/gspca.c
+++ b/drivers/media/usb/gspca/gspca.c
@@ -795,10 +795,8 @@ static int create_urbs(struct gspca_dev *gspca_dev,
for (n = 0; n < nurbs; n++) {
urb = usb_alloc_urb(npkt, GFP_KERNEL);
- if (!urb) {
- pr_err("usb_alloc_urb failed\n");
+ if (!urb)
return -ENOMEM;
- }
gspca_dev->urb[n] = urb;
urb->transfer_buffer = usb_alloc_coherent(gspca_dev->dev,
bsize,
diff --git a/drivers/media/usb/gspca/konica.c b/drivers/media/usb/gspca/konica.c
index 0712b1bc90b4..40aaaa9c5f30 100644
--- a/drivers/media/usb/gspca/konica.c
+++ b/drivers/media/usb/gspca/konica.c
@@ -208,10 +208,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
packet_size =
le16_to_cpu(alt->endpoint[i].desc.wMaxPacketSize);
urb = usb_alloc_urb(SD_NPKT, GFP_KERNEL);
- if (!urb) {
- pr_err("usb_alloc_urb failed\n");
+ if (!urb)
return -ENOMEM;
- }
gspca_dev->urb[n] = urb;
urb->transfer_buffer = usb_alloc_coherent(gspca_dev->dev,
packet_size * SD_NPKT,
diff --git a/drivers/media/usb/hackrf/hackrf.c b/drivers/media/usb/hackrf/hackrf.c
index b1e229a44192..c2c8d12e9498 100644
--- a/drivers/media/usb/hackrf/hackrf.c
+++ b/drivers/media/usb/hackrf/hackrf.c
@@ -691,7 +691,6 @@ static int hackrf_alloc_urbs(struct hackrf_dev *dev, bool rcv)
dev_dbg(dev->dev, "alloc urb=%d\n", i);
dev->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC);
if (!dev->urb_list[i]) {
- dev_dbg(dev->dev, "failed\n");
for (j = 0; j < i; j++)
usb_free_urb(dev->urb_list[j]);
return -ENOMEM;
diff --git a/drivers/media/usb/hdpvr/hdpvr-video.c b/drivers/media/usb/hdpvr/hdpvr-video.c
index 2a3a8b470555..6d43d75493ea 100644
--- a/drivers/media/usb/hdpvr/hdpvr-video.c
+++ b/drivers/media/usb/hdpvr/hdpvr-video.c
@@ -155,10 +155,8 @@ int hdpvr_alloc_buffers(struct hdpvr_device *dev, uint count)
buf->dev = dev;
urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!urb) {
- v4l2_err(&dev->v4l2_dev, "cannot allocate urb\n");
+ if (!urb)
goto exit_urb;
- }
buf->urb = urb;
mem = usb_alloc_coherent(dev->udev, dev->bulk_in_size, GFP_KERNEL,
diff --git a/drivers/media/usb/msi2500/msi2500.c b/drivers/media/usb/msi2500/msi2500.c
index e7f167d44c61..367eb7e2a31d 100644
--- a/drivers/media/usb/msi2500/msi2500.c
+++ b/drivers/media/usb/msi2500/msi2500.c
@@ -509,7 +509,6 @@ static int msi2500_isoc_init(struct msi2500_dev *dev)
for (i = 0; i < MAX_ISO_BUFS; i++) {
urb = usb_alloc_urb(ISO_FRAMES_PER_DESC, GFP_KERNEL);
if (urb == NULL) {
- dev_err(dev->dev, "Failed to allocate urb %d\n", i);
msi2500_isoc_cleanup(dev);
return -ENOMEM;
}
diff --git a/drivers/media/usb/pwc/pwc-if.c b/drivers/media/usb/pwc/pwc-if.c
index b51b27a3fd61..c4454c928776 100644
--- a/drivers/media/usb/pwc/pwc-if.c
+++ b/drivers/media/usb/pwc/pwc-if.c
@@ -410,7 +410,6 @@ retry:
for (i = 0; i < MAX_ISO_BUFS; i++) {
urb = usb_alloc_urb(ISO_FRAMES_PER_DESC, GFP_KERNEL);
if (urb == NULL) {
- PWC_ERROR("Failed to allocate urb %d\n", i);
pwc_isoc_cleanup(pdev);
return -ENOMEM;
}
diff --git a/drivers/media/usb/s2255/s2255drv.c b/drivers/media/usb/s2255/s2255drv.c
index 43ba71a7d02b..9458eb0ef66f 100644
--- a/drivers/media/usb/s2255/s2255drv.c
+++ b/drivers/media/usb/s2255/s2255drv.c
@@ -2113,11 +2113,8 @@ static int s2255_start_readpipe(struct s2255_dev *dev)
pipe_info->state = 1;
pipe_info->err_count = 0;
pipe_info->stream_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!pipe_info->stream_urb) {
- dev_err(&dev->udev->dev,
- "ReadStream: Unable to alloc URB\n");
+ if (!pipe_info->stream_urb)
return -ENOMEM;
- }
/* transfer buffer allocated in board_init */
usb_fill_bulk_urb(pipe_info->stream_urb, dev->udev,
pipe,
@@ -2290,10 +2287,8 @@ static int s2255_probe(struct usb_interface *interface,
}
dev->fw_data->fw_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!dev->fw_data->fw_urb) {
- dev_err(&interface->dev, "out of memory!\n");
+ if (!dev->fw_data->fw_urb)
goto errorFWURB;
- }
dev->fw_data->pfw_data = kzalloc(CHUNK_SIZE, GFP_KERNEL);
if (!dev->fw_data->pfw_data) {
diff --git a/drivers/media/usb/stk1160/stk1160-video.c b/drivers/media/usb/stk1160/stk1160-video.c
index 6ecb0b48423f..ce8ebbe395a6 100644
--- a/drivers/media/usb/stk1160/stk1160-video.c
+++ b/drivers/media/usb/stk1160/stk1160-video.c
@@ -457,10 +457,8 @@ int stk1160_alloc_isoc(struct stk1160 *dev)
for (i = 0; i < num_bufs; i++) {
urb = usb_alloc_urb(max_packets, GFP_KERNEL);
- if (!urb) {
- stk1160_err("cannot alloc urb[%d]\n", i);
+ if (!urb)
goto free_i_bufs;
- }
dev->isoc_ctl.urb[i] = urb;
#ifndef CONFIG_DMA_NONCOHERENT
diff --git a/drivers/media/usb/stkwebcam/stk-webcam.c b/drivers/media/usb/stkwebcam/stk-webcam.c
index c21c4c004f97..db200c9d796d 100644
--- a/drivers/media/usb/stkwebcam/stk-webcam.c
+++ b/drivers/media/usb/stkwebcam/stk-webcam.c
@@ -452,10 +452,8 @@ static int stk_prepare_iso(struct stk_camera *dev)
STK_ERROR("isobuf data already allocated\n");
if (dev->isobufs[i].urb == NULL) {
urb = usb_alloc_urb(ISO_FRAMES_PER_DESC, GFP_KERNEL);
- if (urb == NULL) {
- STK_ERROR("Failed to allocate URB %d\n", i);
+ if (urb == NULL)
goto isobufs_out;
- }
dev->isobufs[i].urb = urb;
} else {
STK_ERROR("Killing URB\n");
diff --git a/drivers/media/usb/tm6000/tm6000-dvb.c b/drivers/media/usb/tm6000/tm6000-dvb.c
index 095f5db1a790..0426b210383b 100644
--- a/drivers/media/usb/tm6000/tm6000-dvb.c
+++ b/drivers/media/usb/tm6000/tm6000-dvb.c
@@ -129,10 +129,8 @@ static int tm6000_start_stream(struct tm6000_core *dev)
}
dvb->bulk_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (dvb->bulk_urb == NULL) {
- printk(KERN_ERR "tm6000: couldn't allocate urb\n");
+ if (dvb->bulk_urb == NULL)
return -ENOMEM;
- }
pipe = usb_rcvbulkpipe(dev->udev, dev->bulk_in.endp->desc.bEndpointAddress
& USB_ENDPOINT_NUMBER_MASK);
diff --git a/drivers/media/usb/tm6000/tm6000-video.c b/drivers/media/usb/tm6000/tm6000-video.c
index fa5e8bda2ae4..dee7e7d3d47d 100644
--- a/drivers/media/usb/tm6000/tm6000-video.c
+++ b/drivers/media/usb/tm6000/tm6000-video.c
@@ -635,7 +635,6 @@ static int tm6000_prepare_isoc(struct tm6000_core *dev)
for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
urb = usb_alloc_urb(max_packets, GFP_KERNEL);
if (!urb) {
- tm6000_err("cannot alloc isoc_ctl.urb %i\n", i);
tm6000_uninit_isoc(dev);
usb_free_urb(urb);
return -ENOMEM;
diff --git a/drivers/media/usb/usbvision/usbvision-core.c b/drivers/media/usb/usbvision/usbvision-core.c
index 52ac4391582c..c23bf73a68ea 100644
--- a/drivers/media/usb/usbvision/usbvision-core.c
+++ b/drivers/media/usb/usbvision/usbvision-core.c
@@ -2303,11 +2303,8 @@ int usbvision_init_isoc(struct usb_usbvision *usbvision)
struct urb *urb;
urb = usb_alloc_urb(USBVISION_URB_FRAMES, GFP_KERNEL);
- if (urb == NULL) {
- dev_err(&usbvision->dev->dev,
- "%s: usb_alloc_urb() failed\n", __func__);
+ if (urb == NULL)
return -ENOMEM;
- }
usbvision->sbuf[buf_idx].urb = urb;
usbvision->sbuf[buf_idx].data =
usb_alloc_coherent(usbvision->dev,
diff --git a/drivers/media/usb/zr364xx/zr364xx.c b/drivers/media/usb/zr364xx/zr364xx.c
index 7433ba5c4bad..cc128db85723 100644
--- a/drivers/media/usb/zr364xx/zr364xx.c
+++ b/drivers/media/usb/zr364xx/zr364xx.c
@@ -1045,10 +1045,8 @@ static int zr364xx_start_readpipe(struct zr364xx_camera *cam)
pipe_info->state = 1;
pipe_info->err_count = 0;
pipe_info->stream_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!pipe_info->stream_urb) {
- dev_err(&cam->udev->dev, "ReadStream: Unable to alloc URB\n");
+ if (!pipe_info->stream_urb)
return -ENOMEM;
- }
/* transfer buffer allocated in board_init */
usb_fill_bulk_urb(pipe_info->stream_urb, cam->udev,
pipe,
diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c
index 1e819f98b94f..bb3e0d1dd355 100644
--- a/drivers/mmc/host/vub300.c
+++ b/drivers/mmc/host/vub300.c
@@ -2116,13 +2116,11 @@ static int vub300_probe(struct usb_interface *interface,
command_out_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!command_out_urb) {
retval = -ENOMEM;
- dev_err(&udev->dev, "not enough memory for command_out_urb\n");
goto error0;
}
command_res_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!command_res_urb) {
retval = -ENOMEM;
- dev_err(&udev->dev, "not enough memory for command_res_urb\n");
goto error1;
}
/* this also allocates memory for our VUB300 mmc host device */
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 19bff3a10f69..fe00f9134d51 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -24,6 +24,15 @@ config PHY_BCM_NS_USB2
Enable this to support Broadcom USB 2.0 PHY connected to the USB
controller on Northstar family.
+config PHY_BCM_NS_USB3
+ tristate "Broadcom Northstar USB 3.0 PHY Driver"
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ depends on HAS_IOMEM && OF
+ select GENERIC_PHY
+ help
+ Enable this to support Broadcom USB 3.0 PHY connected to the USB
+ controller on Northstar family.
+
config PHY_BERLIN_USB
tristate "Marvell Berlin USB PHY Driver"
depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
@@ -258,7 +267,9 @@ config PHY_SUN4I_USB
depends on RESET_CONTROLLER
depends on EXTCON
depends on POWER_SUPPLY
+ depends on USB_SUPPORT
select GENERIC_PHY
+ select USB_COMMON
help
Enable this to support the transceiver that is part of Allwinner
sunxi SoCs.
@@ -358,6 +369,14 @@ config PHY_ROCKCHIP_USB
help
Enable this to support the Rockchip USB 2.0 PHY.
+config PHY_ROCKCHIP_INNO_USB2
+ tristate "Rockchip INNO USB2PHY Driver"
+ depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
+ depends on COMMON_CLK
+ select GENERIC_PHY
+ help
+ Support for Rockchip USB2.0 PHY with Innosilicon IP block.
+
config PHY_ROCKCHIP_EMMC
tristate "Rockchip EMMC PHY Driver"
depends on ARCH_ROCKCHIP && OF
@@ -372,6 +391,23 @@ config PHY_ROCKCHIP_DP
help
Enable this to support the Rockchip Display Port PHY.
+config PHY_ROCKCHIP_PCIE
+ tristate "Rockchip PCIe PHY Driver"
+ depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Enable this to support the Rockchip PCIe PHY.
+
+config PHY_ROCKCHIP_TYPEC
+ tristate "Rockchip TYPEC PHY Driver"
+ depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
+ select EXTCON
+ select GENERIC_PHY
+ select RESET_CONTROLLER
+ help
+ Enable this to support the Rockchip USB TYPEC PHY.
+
config PHY_ST_SPEAR1310_MIPHY
tristate "ST SPEAR1310-MIPHY driver"
select GENERIC_PHY
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 90ae19879b0a..a534cf5be07d 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -4,6 +4,7 @@
obj-$(CONFIG_GENERIC_PHY) += phy-core.o
obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o
+obj-$(CONFIG_PHY_BCM_NS_USB3) += phy-bcm-ns-usb3.o
obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o
@@ -39,8 +40,11 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
+obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o
obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
+obj-$(CONFIG_PHY_ROCKCHIP_PCIE) += phy-rockchip-pcie.o
obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
+obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o
obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
diff --git a/drivers/phy/phy-bcm-ns-usb3.c b/drivers/phy/phy-bcm-ns-usb3.c
new file mode 100644
index 000000000000..f420fa4bebfc
--- /dev/null
+++ b/drivers/phy/phy-bcm-ns-usb3.c
@@ -0,0 +1,274 @@
+/*
+ * Broadcom Northstar USB 3.0 PHY Driver
+ *
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * All magic values used for initialization (and related comments) were obtained
+ * from Broadcom's SDK:
+ * Copyright (c) Broadcom Corp, 2012
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bcma/bcma.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/slab.h>
+
+#define BCM_NS_USB3_MII_MNG_TIMEOUT_US 1000 /* usecs */
+
+enum bcm_ns_family {
+ BCM_NS_UNKNOWN,
+ BCM_NS_AX,
+ BCM_NS_BX,
+};
+
+struct bcm_ns_usb3 {
+ struct device *dev;
+ enum bcm_ns_family family;
+ void __iomem *dmp;
+ void __iomem *ccb_mii;
+ struct phy *phy;
+};
+
+static const struct of_device_id bcm_ns_usb3_id_table[] = {
+ {
+ .compatible = "brcm,ns-ax-usb3-phy",
+ .data = (int *)BCM_NS_AX,
+ },
+ {
+ .compatible = "brcm,ns-bx-usb3-phy",
+ .data = (int *)BCM_NS_BX,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, bcm_ns_usb3_id_table);
+
+static int bcm_ns_usb3_wait_reg(struct bcm_ns_usb3 *usb3, void __iomem *addr,
+ u32 mask, u32 value, unsigned long timeout)
+{
+ unsigned long deadline = jiffies + timeout;
+ u32 val;
+
+ do {
+ val = readl(addr);
+ if ((val & mask) == value)
+ return 0;
+ cpu_relax();
+ udelay(10);
+ } while (!time_after_eq(jiffies, deadline));
+
+ dev_err(usb3->dev, "Timeout waiting for register %p\n", addr);
+
+ return -EBUSY;
+}
+
+static inline int bcm_ns_usb3_mii_mng_wait_idle(struct bcm_ns_usb3 *usb3)
+{
+ return bcm_ns_usb3_wait_reg(usb3, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL,
+ 0x0100, 0x0000,
+ usecs_to_jiffies(BCM_NS_USB3_MII_MNG_TIMEOUT_US));
+}
+
+static int bcm_ns_usb3_mii_mng_write32(struct bcm_ns_usb3 *usb3, u32 value)
+{
+ int err;
+
+ err = bcm_ns_usb3_mii_mng_wait_idle(usb3);
+ if (err < 0) {
+ dev_err(usb3->dev, "Couldn't write 0x%08x value\n", value);
+ return err;
+ }
+
+ writel(value, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA);
+
+ return 0;
+}
+
+static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3)
+{
+ int err;
+
+ /* Enable MDIO. Setting MDCDIV as 26 */
+ writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL);
+
+ /* Wait for MDIO? */
+ udelay(2);
+
+ /* USB3 PLL Block */
+ err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
+ if (err < 0)
+ return err;
+
+ /* Assert Ana_Pllseq start */
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x58061000);
+
+ /* Assert CML Divider ratio to 26 */
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
+
+ /* Asserting PLL Reset */
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x582ec000);
+
+ /* Deaaserting PLL Reset */
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x582e8000);
+
+ /* Waiting MII Mgt interface idle */
+ bcm_ns_usb3_mii_mng_wait_idle(usb3);
+
+ /* Deasserting USB3 system reset */
+ writel(0, usb3->dmp + BCMA_RESET_CTL);
+
+ /* PLL frequency monitor enable */
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x58069000);
+
+ /* PIPE Block */
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8060);
+
+ /* CMPMAX & CMPMINTH setting */
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x580af30d);
+
+ /* DEGLITCH MIN & MAX setting */
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x580e6302);
+
+ /* TXPMD block */
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
+
+ /* Enabling SSC */
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
+
+ /* Waiting MII Mgt interface idle */
+ bcm_ns_usb3_mii_mng_wait_idle(usb3);
+
+ return 0;
+}
+
+static int bcm_ns_usb3_phy_init_ns_ax(struct bcm_ns_usb3 *usb3)
+{
+ int err;
+
+ /* Enable MDIO. Setting MDCDIV as 26 */
+ writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL);
+
+ /* Wait for MDIO? */
+ udelay(2);
+
+ /* PLL30 block */
+ err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
+ if (err < 0)
+ return err;
+
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
+
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x587e80e0);
+
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x580a009c);
+
+ /* Enable SSC */
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
+
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x580a21d3);
+
+ bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
+
+ /* Waiting MII Mgt interface idle */
+ bcm_ns_usb3_mii_mng_wait_idle(usb3);
+
+ /* Deasserting USB3 system reset */
+ writel(0, usb3->dmp + BCMA_RESET_CTL);
+
+ return 0;
+}
+
+static int bcm_ns_usb3_phy_init(struct phy *phy)
+{
+ struct bcm_ns_usb3 *usb3 = phy_get_drvdata(phy);
+ int err;
+
+ /* Perform USB3 system soft reset */
+ writel(BCMA_RESET_CTL_RESET, usb3->dmp + BCMA_RESET_CTL);
+
+ switch (usb3->family) {
+ case BCM_NS_AX:
+ err = bcm_ns_usb3_phy_init_ns_ax(usb3);
+ break;
+ case BCM_NS_BX:
+ err = bcm_ns_usb3_phy_init_ns_bx(usb3);
+ break;
+ default:
+ WARN_ON(1);
+ err = -ENOTSUPP;
+ }
+
+ return err;
+}
+
+static const struct phy_ops ops = {
+ .init = bcm_ns_usb3_phy_init,
+ .owner = THIS_MODULE,
+};
+
+static int bcm_ns_usb3_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct of_device_id *of_id;
+ struct bcm_ns_usb3 *usb3;
+ struct resource *res;
+ struct phy_provider *phy_provider;
+
+ usb3 = devm_kzalloc(dev, sizeof(*usb3), GFP_KERNEL);
+ if (!usb3)
+ return -ENOMEM;
+
+ usb3->dev = dev;
+
+ of_id = of_match_device(bcm_ns_usb3_id_table, dev);
+ if (!of_id)
+ return -EINVAL;
+ usb3->family = (enum bcm_ns_family)of_id->data;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmp");
+ usb3->dmp = devm_ioremap_resource(dev, res);
+ if (IS_ERR(usb3->dmp)) {
+ dev_err(dev, "Failed to map DMP regs\n");
+ return PTR_ERR(usb3->dmp);
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ccb-mii");
+ usb3->ccb_mii = devm_ioremap_resource(dev, res);
+ if (IS_ERR(usb3->ccb_mii)) {
+ dev_err(dev, "Failed to map ChipCommon B MII regs\n");
+ return PTR_ERR(usb3->ccb_mii);
+ }
+
+ usb3->phy = devm_phy_create(dev, NULL, &ops);
+ if (IS_ERR(usb3->phy)) {
+ dev_err(dev, "Failed to create PHY\n");
+ return PTR_ERR(usb3->phy);
+ }
+
+ phy_set_drvdata(usb3->phy, usb3);
+ platform_set_drvdata(pdev, usb3);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (!IS_ERR(phy_provider))
+ dev_info(dev, "Registered Broadcom Northstar USB 3.0 PHY driver\n");
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver bcm_ns_usb3_driver = {
+ .probe = bcm_ns_usb3_probe,
+ .driver = {
+ .name = "bcm_ns_usb3",
+ .of_match_table = bcm_ns_usb3_id_table,
+ },
+};
+module_platform_driver(bcm_ns_usb3_driver);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-bcm-ns2-pcie.c b/drivers/phy/phy-bcm-ns2-pcie.c
index 9513f7ab1eaa..4c7d11d2b378 100644
--- a/drivers/phy/phy-bcm-ns2-pcie.c
+++ b/drivers/phy/phy-bcm-ns2-pcie.c
@@ -18,11 +18,6 @@
#include <linux/phy.h>
#include <linux/phy/phy.h>
-struct ns2_pci_phy {
- struct mdio_device *mdiodev;
- struct phy *phy;
-};
-
#define BLK_ADDR_REG_OFFSET 0x1f
#define PLL_AFE1_100MHZ_BLK 0x2100
#define PLL_CLK_AMP_OFFSET 0x03
@@ -30,17 +25,17 @@ struct ns2_pci_phy {
static int ns2_pci_phy_init(struct phy *p)
{
- struct ns2_pci_phy *phy = phy_get_drvdata(p);
+ struct mdio_device *mdiodev = phy_get_drvdata(p);
int rc;
/* select the AFE 100MHz block page */
- rc = mdiobus_write(phy->mdiodev->bus, phy->mdiodev->addr,
+ rc = mdiobus_write(mdiodev->bus, mdiodev->addr,
BLK_ADDR_REG_OFFSET, PLL_AFE1_100MHZ_BLK);
if (rc)
goto err;
/* set the 100 MHz reference clock amplitude to 2.05 v */
- rc = mdiobus_write(phy->mdiodev->bus, phy->mdiodev->addr,
+ rc = mdiobus_write(mdiodev->bus, mdiodev->addr,
PLL_CLK_AMP_OFFSET, PLL_CLK_AMP_2P05V);
if (rc)
goto err;
@@ -48,19 +43,19 @@ static int ns2_pci_phy_init(struct phy *p)
return 0;
err:
- dev_err(&phy->mdiodev->dev, "Error %d writing to phy\n", rc);
+ dev_err(&mdiodev->dev, "Error %d writing to phy\n", rc);
return rc;
}
-static struct phy_ops ns2_pci_phy_ops = {
+static const struct phy_ops ns2_pci_phy_ops = {
.init = ns2_pci_phy_init,
+ .owner = THIS_MODULE,
};
static int ns2_pci_phy_probe(struct mdio_device *mdiodev)
{
struct device *dev = &mdiodev->dev;
struct phy_provider *provider;
- struct ns2_pci_phy *p;
struct phy *phy;
phy = devm_phy_create(dev, dev->of_node, &ns2_pci_phy_ops);
@@ -69,16 +64,7 @@ static int ns2_pci_phy_probe(struct mdio_device *mdiodev)
return PTR_ERR(phy);
}
- p = devm_kmalloc(dev, sizeof(struct ns2_pci_phy),
- GFP_KERNEL);
- if (!p)
- return -ENOMEM;
-
- p->mdiodev = mdiodev;
- dev_set_drvdata(dev, p);
-
- p->phy = phy;
- phy_set_drvdata(phy, p);
+ phy_set_drvdata(phy, mdiodev);
provider = devm_of_phy_provider_register(&phy->dev,
of_phy_simple_xlate);
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index 8eca906b6e70..a268f4d6f3e9 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -357,6 +357,21 @@ int phy_set_mode(struct phy *phy, enum phy_mode mode)
}
EXPORT_SYMBOL_GPL(phy_set_mode);
+int phy_reset(struct phy *phy)
+{
+ int ret;
+
+ if (!phy || !phy->ops->reset)
+ return 0;
+
+ mutex_lock(&phy->mutex);
+ ret = phy->ops->reset(phy);
+ mutex_unlock(&phy->mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(phy_reset);
+
/**
* _of_phy_get() - lookup and obtain a reference to a phy by phandle
* @np: device_node for which to get the phy
diff --git a/drivers/phy/phy-da8xx-usb.c b/drivers/phy/phy-da8xx-usb.c
index b2e59b6170ac..32ae78c8ca17 100644
--- a/drivers/phy/phy-da8xx-usb.c
+++ b/drivers/phy/phy-da8xx-usb.c
@@ -154,7 +154,7 @@ static int da8xx_usb_phy_probe(struct platform_device *pdev)
d_phy->regmap = syscon_regmap_lookup_by_compatible(
"ti,da830-cfgchip");
else
- d_phy->regmap = syscon_regmap_lookup_by_pdevname("syscon.0");
+ d_phy->regmap = syscon_regmap_lookup_by_pdevname("syscon");
if (IS_ERR(d_phy->regmap)) {
dev_err(dev, "Failed to get syscon\n");
return PTR_ERR(d_phy->regmap);
diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/phy-exynos5-usbdrd.c
index 20696f53303f..07ed608905ac 100644
--- a/drivers/phy/phy-exynos5-usbdrd.c
+++ b/drivers/phy/phy-exynos5-usbdrd.c
@@ -249,7 +249,7 @@ static void exynos5_usbdrd_phy_isol(struct phy_usb_instance *inst,
static unsigned int
exynos5_usbdrd_pipe3_set_refclk(struct phy_usb_instance *inst)
{
- static u32 reg;
+ u32 reg;
struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
/* restore any previous reference clock settings */
@@ -295,7 +295,7 @@ exynos5_usbdrd_pipe3_set_refclk(struct phy_usb_instance *inst)
static unsigned int
exynos5_usbdrd_utmi_set_refclk(struct phy_usb_instance *inst)
{
- static u32 reg;
+ u32 reg;
struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
/* restore any previous reference clock settings */
diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
index c134989052f5..fe909fd8144f 100644
--- a/drivers/phy/phy-omap-usb2.c
+++ b/drivers/phy/phy-omap-usb2.c
@@ -133,11 +133,49 @@ static int omap_usb_power_on(struct phy *x)
return omap_usb_phy_power(phy, true);
}
+static int omap_usb2_disable_clocks(struct omap_usb *phy)
+{
+ clk_disable(phy->wkupclk);
+ if (!IS_ERR(phy->optclk))
+ clk_disable(phy->optclk);
+
+ return 0;
+}
+
+static int omap_usb2_enable_clocks(struct omap_usb *phy)
+{
+ int ret;
+
+ ret = clk_enable(phy->wkupclk);
+ if (ret < 0) {
+ dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
+ goto err0;
+ }
+
+ if (!IS_ERR(phy->optclk)) {
+ ret = clk_enable(phy->optclk);
+ if (ret < 0) {
+ dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
+ goto err1;
+ }
+ }
+
+ return 0;
+
+err1:
+ clk_disable(phy->wkupclk);
+
+err0:
+ return ret;
+}
+
static int omap_usb_init(struct phy *x)
{
struct omap_usb *phy = phy_get_drvdata(x);
u32 val;
+ omap_usb2_enable_clocks(phy);
+
if (phy->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) {
/*
*
@@ -155,8 +193,16 @@ static int omap_usb_init(struct phy *x)
return 0;
}
+static int omap_usb_exit(struct phy *x)
+{
+ struct omap_usb *phy = phy_get_drvdata(x);
+
+ return omap_usb2_disable_clocks(phy);
+}
+
static const struct phy_ops ops = {
.init = omap_usb_init,
+ .exit = omap_usb_exit,
.power_on = omap_usb_power_on,
.power_off = omap_usb_power_off,
.owner = THIS_MODULE,
@@ -376,65 +422,11 @@ static int omap_usb2_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM
-
-static int omap_usb2_runtime_suspend(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct omap_usb *phy = platform_get_drvdata(pdev);
-
- clk_disable(phy->wkupclk);
- if (!IS_ERR(phy->optclk))
- clk_disable(phy->optclk);
-
- return 0;
-}
-
-static int omap_usb2_runtime_resume(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct omap_usb *phy = platform_get_drvdata(pdev);
- int ret;
-
- ret = clk_enable(phy->wkupclk);
- if (ret < 0) {
- dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
- goto err0;
- }
-
- if (!IS_ERR(phy->optclk)) {
- ret = clk_enable(phy->optclk);
- if (ret < 0) {
- dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
- goto err1;
- }
- }
-
- return 0;
-
-err1:
- clk_disable(phy->wkupclk);
-
-err0:
- return ret;
-}
-
-static const struct dev_pm_ops omap_usb2_pm_ops = {
- SET_RUNTIME_PM_OPS(omap_usb2_runtime_suspend, omap_usb2_runtime_resume,
- NULL)
-};
-
-#define DEV_PM_OPS (&omap_usb2_pm_ops)
-#else
-#define DEV_PM_OPS NULL
-#endif
-
static struct platform_driver omap_usb2_driver = {
.probe = omap_usb2_probe,
.remove = omap_usb2_remove,
.driver = {
.name = "omap-usb2",
- .pm = DEV_PM_OPS,
.of_match_table = omap_usb2_id_table,
},
};
diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/phy-qcom-ufs.c
index 107cb57c3513..18a5b495ad65 100644
--- a/drivers/phy/phy-qcom-ufs.c
+++ b/drivers/phy/phy-qcom-ufs.c
@@ -283,10 +283,8 @@ static int __ufs_qcom_phy_init_vreg(struct phy *phy,
err = 0;
}
snprintf(prop_name, MAX_PROP_NAME, "%s-always-on", name);
- if (of_get_property(dev->of_node, prop_name, NULL))
- vreg->is_always_on = true;
- else
- vreg->is_always_on = false;
+ vreg->is_always_on = of_property_read_bool(dev->of_node,
+ prop_name);
}
if (!strcmp(name, "vdda-pll")) {
diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c
index 31156c9c4707..3d97eadd247d 100644
--- a/drivers/phy/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/phy-rcar-gen3-usb2.c
@@ -280,6 +280,7 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
{ .compatible = "renesas,usb2-phy-r8a7795" },
+ { .compatible = "renesas,usb2-phy-r8a7796" },
{ .compatible = "renesas,rcar-gen3-usb2-phy" },
{ }
};
diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/phy-rockchip-inno-usb2.c
new file mode 100644
index 000000000000..ac203107b071
--- /dev/null
+++ b/drivers/phy/phy-rockchip-inno-usb2.c
@@ -0,0 +1,707 @@
+/*
+ * Rockchip USB2.0 PHY with Innosilicon IP block driver
+ *
+ * Copyright (C) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/gpio/consumer.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+#define BIT_WRITEABLE_SHIFT 16
+#define SCHEDULE_DELAY (60 * HZ)
+
+enum rockchip_usb2phy_port_id {
+ USB2PHY_PORT_OTG,
+ USB2PHY_PORT_HOST,
+ USB2PHY_NUM_PORTS,
+};
+
+enum rockchip_usb2phy_host_state {
+ PHY_STATE_HS_ONLINE = 0,
+ PHY_STATE_DISCONNECT = 1,
+ PHY_STATE_CONNECT = 2,
+ PHY_STATE_FS_LS_ONLINE = 4,
+};
+
+struct usb2phy_reg {
+ unsigned int offset;
+ unsigned int bitend;
+ unsigned int bitstart;
+ unsigned int disable;
+ unsigned int enable;
+};
+
+/**
+ * struct rockchip_usb2phy_port_cfg: usb-phy port configuration.
+ * @phy_sus: phy suspend register.
+ * @ls_det_en: linestate detection enable register.
+ * @ls_det_st: linestate detection state register.
+ * @ls_det_clr: linestate detection clear register.
+ * @utmi_ls: utmi linestate state register.
+ * @utmi_hstdet: utmi host disconnect register.
+ */
+struct rockchip_usb2phy_port_cfg {
+ struct usb2phy_reg phy_sus;
+ struct usb2phy_reg ls_det_en;
+ struct usb2phy_reg ls_det_st;
+ struct usb2phy_reg ls_det_clr;
+ struct usb2phy_reg utmi_ls;
+ struct usb2phy_reg utmi_hstdet;
+};
+
+/**
+ * struct rockchip_usb2phy_cfg: usb-phy configuration.
+ * @reg: the address offset of grf for usb-phy config.
+ * @num_ports: specify how many ports that the phy has.
+ * @clkout_ctl: keep on/turn off output clk of phy.
+ */
+struct rockchip_usb2phy_cfg {
+ unsigned int reg;
+ unsigned int num_ports;
+ struct usb2phy_reg clkout_ctl;
+ const struct rockchip_usb2phy_port_cfg port_cfgs[USB2PHY_NUM_PORTS];
+};
+
+/**
+ * struct rockchip_usb2phy_port: usb-phy port data.
+ * @port_id: flag for otg port or host port.
+ * @suspended: phy suspended flag.
+ * @ls_irq: IRQ number assigned for linestate detection.
+ * @mutex: for register updating in sm_work.
+ * @sm_work: OTG state machine work.
+ * @phy_cfg: port register configuration, assigned by driver data.
+ */
+struct rockchip_usb2phy_port {
+ struct phy *phy;
+ unsigned int port_id;
+ bool suspended;
+ int ls_irq;
+ struct mutex mutex;
+ struct delayed_work sm_work;
+ const struct rockchip_usb2phy_port_cfg *port_cfg;
+};
+
+/**
+ * struct rockchip_usb2phy: usb2.0 phy driver data.
+ * @grf: General Register Files regmap.
+ * @clk: clock struct of phy input clk.
+ * @clk480m: clock struct of phy output clk.
+ * @clk_hw: clock struct of phy output clk management.
+ * @phy_cfg: phy register configuration, assigned by driver data.
+ * @ports: phy port instance.
+ */
+struct rockchip_usb2phy {
+ struct device *dev;
+ struct regmap *grf;
+ struct clk *clk;
+ struct clk *clk480m;
+ struct clk_hw clk480m_hw;
+ const struct rockchip_usb2phy_cfg *phy_cfg;
+ struct rockchip_usb2phy_port ports[USB2PHY_NUM_PORTS];
+};
+
+static inline int property_enable(struct rockchip_usb2phy *rphy,
+ const struct usb2phy_reg *reg, bool en)
+{
+ unsigned int val, mask, tmp;
+
+ tmp = en ? reg->enable : reg->disable;
+ mask = GENMASK(reg->bitend, reg->bitstart);
+ val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT);
+
+ return regmap_write(rphy->grf, reg->offset, val);
+}
+
+static inline bool property_enabled(struct rockchip_usb2phy *rphy,
+ const struct usb2phy_reg *reg)
+{
+ int ret;
+ unsigned int tmp, orig;
+ unsigned int mask = GENMASK(reg->bitend, reg->bitstart);
+
+ ret = regmap_read(rphy->grf, reg->offset, &orig);
+ if (ret)
+ return false;
+
+ tmp = (orig & mask) >> reg->bitstart;
+ return tmp == reg->enable;
+}
+
+static int rockchip_usb2phy_clk480m_enable(struct clk_hw *hw)
+{
+ struct rockchip_usb2phy *rphy =
+ container_of(hw, struct rockchip_usb2phy, clk480m_hw);
+ int ret;
+
+ /* turn on 480m clk output if it is off */
+ if (!property_enabled(rphy, &rphy->phy_cfg->clkout_ctl)) {
+ ret = property_enable(rphy, &rphy->phy_cfg->clkout_ctl, true);
+ if (ret)
+ return ret;
+
+ /* waitting for the clk become stable */
+ mdelay(1);
+ }
+
+ return 0;
+}
+
+static void rockchip_usb2phy_clk480m_disable(struct clk_hw *hw)
+{
+ struct rockchip_usb2phy *rphy =
+ container_of(hw, struct rockchip_usb2phy, clk480m_hw);
+
+ /* turn off 480m clk output */
+ property_enable(rphy, &rphy->phy_cfg->clkout_ctl, false);
+}
+
+static int rockchip_usb2phy_clk480m_enabled(struct clk_hw *hw)
+{
+ struct rockchip_usb2phy *rphy =
+ container_of(hw, struct rockchip_usb2phy, clk480m_hw);
+
+ return property_enabled(rphy, &rphy->phy_cfg->clkout_ctl);
+}
+
+static unsigned long
+rockchip_usb2phy_clk480m_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ return 480000000;
+}
+
+static const struct clk_ops rockchip_usb2phy_clkout_ops = {
+ .enable = rockchip_usb2phy_clk480m_enable,
+ .disable = rockchip_usb2phy_clk480m_disable,
+ .is_enabled = rockchip_usb2phy_clk480m_enabled,
+ .recalc_rate = rockchip_usb2phy_clk480m_recalc_rate,
+};
+
+static void rockchip_usb2phy_clk480m_unregister(void *data)
+{
+ struct rockchip_usb2phy *rphy = data;
+
+ of_clk_del_provider(rphy->dev->of_node);
+ clk_unregister(rphy->clk480m);
+}
+
+static int
+rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy)
+{
+ struct device_node *node = rphy->dev->of_node;
+ struct clk_init_data init;
+ const char *clk_name;
+ int ret;
+
+ init.flags = 0;
+ init.name = "clk_usbphy_480m";
+ init.ops = &rockchip_usb2phy_clkout_ops;
+
+ /* optional override of the clockname */
+ of_property_read_string(node, "clock-output-names", &init.name);
+
+ if (rphy->clk) {
+ clk_name = __clk_get_name(rphy->clk);
+ init.parent_names = &clk_name;
+ init.num_parents = 1;
+ } else {
+ init.parent_names = NULL;
+ init.num_parents = 0;
+ }
+
+ rphy->clk480m_hw.init = &init;
+
+ /* register the clock */
+ rphy->clk480m = clk_register(rphy->dev, &rphy->clk480m_hw);
+ if (IS_ERR(rphy->clk480m)) {
+ ret = PTR_ERR(rphy->clk480m);
+ goto err_ret;
+ }
+
+ ret = of_clk_add_provider(node, of_clk_src_simple_get, rphy->clk480m);
+ if (ret < 0)
+ goto err_clk_provider;
+
+ ret = devm_add_action(rphy->dev, rockchip_usb2phy_clk480m_unregister,
+ rphy);
+ if (ret < 0)
+ goto err_unreg_action;
+
+ return 0;
+
+err_unreg_action:
+ of_clk_del_provider(node);
+err_clk_provider:
+ clk_unregister(rphy->clk480m);
+err_ret:
+ return ret;
+}
+
+static int rockchip_usb2phy_init(struct phy *phy)
+{
+ struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
+ int ret;
+
+ if (rport->port_id == USB2PHY_PORT_HOST) {
+ /* clear linestate and enable linestate detect irq */
+ mutex_lock(&rport->mutex);
+
+ ret = property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
+ if (ret) {
+ mutex_unlock(&rport->mutex);
+ return ret;
+ }
+
+ ret = property_enable(rphy, &rport->port_cfg->ls_det_en, true);
+ if (ret) {
+ mutex_unlock(&rport->mutex);
+ return ret;
+ }
+
+ mutex_unlock(&rport->mutex);
+ schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
+ }
+
+ return 0;
+}
+
+static int rockchip_usb2phy_power_on(struct phy *phy)
+{
+ struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
+ int ret;
+
+ dev_dbg(&rport->phy->dev, "port power on\n");
+
+ if (!rport->suspended)
+ return 0;
+
+ ret = clk_prepare_enable(rphy->clk480m);
+ if (ret)
+ return ret;
+
+ ret = property_enable(rphy, &rport->port_cfg->phy_sus, false);
+ if (ret)
+ return ret;
+
+ rport->suspended = false;
+ return 0;
+}
+
+static int rockchip_usb2phy_power_off(struct phy *phy)
+{
+ struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
+ int ret;
+
+ dev_dbg(&rport->phy->dev, "port power off\n");
+
+ if (rport->suspended)
+ return 0;
+
+ ret = property_enable(rphy, &rport->port_cfg->phy_sus, true);
+ if (ret)
+ return ret;
+
+ rport->suspended = true;
+ clk_disable_unprepare(rphy->clk480m);
+
+ return 0;
+}
+
+static int rockchip_usb2phy_exit(struct phy *phy)
+{
+ struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+
+ if (rport->port_id == USB2PHY_PORT_HOST)
+ cancel_delayed_work_sync(&rport->sm_work);
+
+ return 0;
+}
+
+static const struct phy_ops rockchip_usb2phy_ops = {
+ .init = rockchip_usb2phy_init,
+ .exit = rockchip_usb2phy_exit,
+ .power_on = rockchip_usb2phy_power_on,
+ .power_off = rockchip_usb2phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+/*
+ * The function manage host-phy port state and suspend/resume phy port
+ * to save power.
+ *
+ * we rely on utmi_linestate and utmi_hostdisconnect to identify whether
+ * devices is disconnect or not. Besides, we do not need care it is FS/LS
+ * disconnected or HS disconnected, actually, we just only need get the
+ * device is disconnected at last through rearm the delayed work,
+ * to suspend the phy port in _PHY_STATE_DISCONNECT_ case.
+ *
+ * NOTE: It may invoke *phy_powr_off or *phy_power_on which will invoke
+ * some clk related APIs, so do not invoke it from interrupt context directly.
+ */
+static void rockchip_usb2phy_sm_work(struct work_struct *work)
+{
+ struct rockchip_usb2phy_port *rport =
+ container_of(work, struct rockchip_usb2phy_port, sm_work.work);
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+ unsigned int sh = rport->port_cfg->utmi_hstdet.bitend -
+ rport->port_cfg->utmi_hstdet.bitstart + 1;
+ unsigned int ul, uhd, state;
+ unsigned int ul_mask, uhd_mask;
+ int ret;
+
+ mutex_lock(&rport->mutex);
+
+ ret = regmap_read(rphy->grf, rport->port_cfg->utmi_ls.offset, &ul);
+ if (ret < 0)
+ goto next_schedule;
+
+ ret = regmap_read(rphy->grf, rport->port_cfg->utmi_hstdet.offset,
+ &uhd);
+ if (ret < 0)
+ goto next_schedule;
+
+ uhd_mask = GENMASK(rport->port_cfg->utmi_hstdet.bitend,
+ rport->port_cfg->utmi_hstdet.bitstart);
+ ul_mask = GENMASK(rport->port_cfg->utmi_ls.bitend,
+ rport->port_cfg->utmi_ls.bitstart);
+
+ /* stitch on utmi_ls and utmi_hstdet as phy state */
+ state = ((uhd & uhd_mask) >> rport->port_cfg->utmi_hstdet.bitstart) |
+ (((ul & ul_mask) >> rport->port_cfg->utmi_ls.bitstart) << sh);
+
+ switch (state) {
+ case PHY_STATE_HS_ONLINE:
+ dev_dbg(&rport->phy->dev, "HS online\n");
+ break;
+ case PHY_STATE_FS_LS_ONLINE:
+ /*
+ * For FS/LS device, the online state share with connect state
+ * from utmi_ls and utmi_hstdet register, so we distinguish
+ * them via suspended flag.
+ *
+ * Plus, there are two cases, one is D- Line pull-up, and D+
+ * line pull-down, the state is 4; another is D+ line pull-up,
+ * and D- line pull-down, the state is 2.
+ */
+ if (!rport->suspended) {
+ /* D- line pull-up, D+ line pull-down */
+ dev_dbg(&rport->phy->dev, "FS/LS online\n");
+ break;
+ }
+ /* fall through */
+ case PHY_STATE_CONNECT:
+ if (rport->suspended) {
+ dev_dbg(&rport->phy->dev, "Connected\n");
+ rockchip_usb2phy_power_on(rport->phy);
+ rport->suspended = false;
+ } else {
+ /* D+ line pull-up, D- line pull-down */
+ dev_dbg(&rport->phy->dev, "FS/LS online\n");
+ }
+ break;
+ case PHY_STATE_DISCONNECT:
+ if (!rport->suspended) {
+ dev_dbg(&rport->phy->dev, "Disconnected\n");
+ rockchip_usb2phy_power_off(rport->phy);
+ rport->suspended = true;
+ }
+
+ /*
+ * activate the linestate detection to get the next device
+ * plug-in irq.
+ */
+ property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
+ property_enable(rphy, &rport->port_cfg->ls_det_en, true);
+
+ /*
+ * we don't need to rearm the delayed work when the phy port
+ * is suspended.
+ */
+ mutex_unlock(&rport->mutex);
+ return;
+ default:
+ dev_dbg(&rport->phy->dev, "unknown phy state\n");
+ break;
+ }
+
+next_schedule:
+ mutex_unlock(&rport->mutex);
+ schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
+}
+
+static irqreturn_t rockchip_usb2phy_linestate_irq(int irq, void *data)
+{
+ struct rockchip_usb2phy_port *rport = data;
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+
+ if (!property_enabled(rphy, &rport->port_cfg->ls_det_st))
+ return IRQ_NONE;
+
+ mutex_lock(&rport->mutex);
+
+ /* disable linestate detect irq and clear its status */
+ property_enable(rphy, &rport->port_cfg->ls_det_en, false);
+ property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
+
+ mutex_unlock(&rport->mutex);
+
+ /*
+ * In this case for host phy port, a new device is plugged in,
+ * meanwhile, if the phy port is suspended, we need rearm the work to
+ * resume it and mange its states; otherwise, we do nothing about that.
+ */
+ if (rport->suspended && rport->port_id == USB2PHY_PORT_HOST)
+ rockchip_usb2phy_sm_work(&rport->sm_work.work);
+
+ return IRQ_HANDLED;
+}
+
+static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy,
+ struct rockchip_usb2phy_port *rport,
+ struct device_node *child_np)
+{
+ int ret;
+
+ rport->port_id = USB2PHY_PORT_HOST;
+ rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_HOST];
+ rport->suspended = true;
+
+ mutex_init(&rport->mutex);
+ INIT_DELAYED_WORK(&rport->sm_work, rockchip_usb2phy_sm_work);
+
+ rport->ls_irq = of_irq_get_byname(child_np, "linestate");
+ if (rport->ls_irq < 0) {
+ dev_err(rphy->dev, "no linestate irq provided\n");
+ return rport->ls_irq;
+ }
+
+ ret = devm_request_threaded_irq(rphy->dev, rport->ls_irq, NULL,
+ rockchip_usb2phy_linestate_irq,
+ IRQF_ONESHOT,
+ "rockchip_usb2phy", rport);
+ if (ret) {
+ dev_err(rphy->dev, "failed to request irq handle\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int rockchip_usb2phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct device_node *child_np;
+ struct phy_provider *provider;
+ struct rockchip_usb2phy *rphy;
+ const struct rockchip_usb2phy_cfg *phy_cfgs;
+ const struct of_device_id *match;
+ unsigned int reg;
+ int index, ret;
+
+ rphy = devm_kzalloc(dev, sizeof(*rphy), GFP_KERNEL);
+ if (!rphy)
+ return -ENOMEM;
+
+ match = of_match_device(dev->driver->of_match_table, dev);
+ if (!match || !match->data) {
+ dev_err(dev, "phy configs are not assigned!\n");
+ return -EINVAL;
+ }
+
+ if (!dev->parent || !dev->parent->of_node)
+ return -EINVAL;
+
+ rphy->grf = syscon_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(rphy->grf))
+ return PTR_ERR(rphy->grf);
+
+ if (of_property_read_u32(np, "reg", &reg)) {
+ dev_err(dev, "the reg property is not assigned in %s node\n",
+ np->name);
+ return -EINVAL;
+ }
+
+ rphy->dev = dev;
+ phy_cfgs = match->data;
+ platform_set_drvdata(pdev, rphy);
+
+ /* find out a proper config which can be matched with dt. */
+ index = 0;
+ while (phy_cfgs[index].reg) {
+ if (phy_cfgs[index].reg == reg) {
+ rphy->phy_cfg = &phy_cfgs[index];
+ break;
+ }
+
+ ++index;
+ }
+
+ if (!rphy->phy_cfg) {
+ dev_err(dev, "no phy-config can be matched with %s node\n",
+ np->name);
+ return -EINVAL;
+ }
+
+ rphy->clk = of_clk_get_by_name(np, "phyclk");
+ if (!IS_ERR(rphy->clk)) {
+ clk_prepare_enable(rphy->clk);
+ } else {
+ dev_info(&pdev->dev, "no phyclk specified\n");
+ rphy->clk = NULL;
+ }
+
+ ret = rockchip_usb2phy_clk480m_register(rphy);
+ if (ret) {
+ dev_err(dev, "failed to register 480m output clock\n");
+ goto disable_clks;
+ }
+
+ index = 0;
+ for_each_available_child_of_node(np, child_np) {
+ struct rockchip_usb2phy_port *rport = &rphy->ports[index];
+ struct phy *phy;
+
+ /*
+ * This driver aim to support both otg-port and host-port,
+ * but unfortunately, the otg part is not ready in current,
+ * so this comments and below codes are interim, which should
+ * be changed after otg-port is supplied soon.
+ */
+ if (of_node_cmp(child_np->name, "host-port"))
+ goto next_child;
+
+ phy = devm_phy_create(dev, child_np, &rockchip_usb2phy_ops);
+ if (IS_ERR(phy)) {
+ dev_err(dev, "failed to create phy\n");
+ ret = PTR_ERR(phy);
+ goto put_child;
+ }
+
+ rport->phy = phy;
+ phy_set_drvdata(rport->phy, rport);
+
+ ret = rockchip_usb2phy_host_port_init(rphy, rport, child_np);
+ if (ret)
+ goto put_child;
+
+next_child:
+ /* to prevent out of boundary */
+ if (++index >= rphy->phy_cfg->num_ports)
+ break;
+ }
+
+ provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ return PTR_ERR_OR_ZERO(provider);
+
+put_child:
+ of_node_put(child_np);
+disable_clks:
+ if (rphy->clk) {
+ clk_disable_unprepare(rphy->clk);
+ clk_put(rphy->clk);
+ }
+ return ret;
+}
+
+static const struct rockchip_usb2phy_cfg rk3366_phy_cfgs[] = {
+ {
+ .reg = 0x700,
+ .num_ports = 2,
+ .clkout_ctl = { 0x0724, 15, 15, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x0728, 15, 0, 0, 0x1d1 },
+ .ls_det_en = { 0x0680, 4, 4, 0, 1 },
+ .ls_det_st = { 0x0690, 4, 4, 0, 1 },
+ .ls_det_clr = { 0x06a0, 4, 4, 0, 1 },
+ .utmi_ls = { 0x049c, 14, 13, 0, 1 },
+ .utmi_hstdet = { 0x049c, 12, 12, 0, 1 }
+ }
+ },
+ },
+ { /* sentinel */ }
+};
+
+static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
+ {
+ .reg = 0xe450,
+ .num_ports = 2,
+ .clkout_ctl = { 0xe450, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0xe458, 1, 0, 0x2, 0x1 },
+ .ls_det_en = { 0xe3c0, 6, 6, 0, 1 },
+ .ls_det_st = { 0xe3e0, 6, 6, 0, 1 },
+ .ls_det_clr = { 0xe3d0, 6, 6, 0, 1 },
+ .utmi_ls = { 0xe2ac, 22, 21, 0, 1 },
+ .utmi_hstdet = { 0xe2ac, 23, 23, 0, 1 }
+ }
+ },
+ },
+ {
+ .reg = 0xe460,
+ .num_ports = 2,
+ .clkout_ctl = { 0xe460, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0xe468, 1, 0, 0x2, 0x1 },
+ .ls_det_en = { 0xe3c0, 11, 11, 0, 1 },
+ .ls_det_st = { 0xe3e0, 11, 11, 0, 1 },
+ .ls_det_clr = { 0xe3d0, 11, 11, 0, 1 },
+ .utmi_ls = { 0xe2ac, 26, 25, 0, 1 },
+ .utmi_hstdet = { 0xe2ac, 27, 27, 0, 1 }
+ }
+ },
+ },
+ { /* sentinel */ }
+};
+
+static const struct of_device_id rockchip_usb2phy_dt_match[] = {
+ { .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
+ { .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
+ {}
+};
+MODULE_DEVICE_TABLE(of, rockchip_usb2phy_dt_match);
+
+static struct platform_driver rockchip_usb2phy_driver = {
+ .probe = rockchip_usb2phy_probe,
+ .driver = {
+ .name = "rockchip-usb2phy",
+ .of_match_table = rockchip_usb2phy_dt_match,
+ },
+};
+module_platform_driver(rockchip_usb2phy_driver);
+
+MODULE_AUTHOR("Frank Wang <frank.wang@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip USB2.0 PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-rockchip-pcie.c b/drivers/phy/phy-rockchip-pcie.c
new file mode 100644
index 000000000000..a2b4c6b58aea
--- /dev/null
+++ b/drivers/phy/phy-rockchip-pcie.c
@@ -0,0 +1,357 @@
+/*
+ * Rockchip PCIe PHY driver
+ *
+ * Copyright (C) 2016 Shawn Lin <shawn.lin@rock-chips.com>
+ * Copyright (C) 2016 ROCKCHIP, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/*
+ * The higher 16-bit of this register is used for write protection
+ * only if BIT(x + 16) set to 1 the BIT(x) can be written.
+ */
+#define HIWORD_UPDATE(val, mask, shift) \
+ ((val) << (shift) | (mask) << ((shift) + 16))
+
+#define PHY_MAX_LANE_NUM 4
+#define PHY_CFG_DATA_SHIFT 7
+#define PHY_CFG_ADDR_SHIFT 1
+#define PHY_CFG_DATA_MASK 0xf
+#define PHY_CFG_ADDR_MASK 0x3f
+#define PHY_CFG_RD_MASK 0x3ff
+#define PHY_CFG_WR_ENABLE 1
+#define PHY_CFG_WR_DISABLE 1
+#define PHY_CFG_WR_SHIFT 0
+#define PHY_CFG_WR_MASK 1
+#define PHY_CFG_PLL_LOCK 0x10
+#define PHY_CFG_CLK_TEST 0x10
+#define PHY_CFG_CLK_SCC 0x12
+#define PHY_CFG_SEPE_RATE BIT(3)
+#define PHY_CFG_PLL_100M BIT(3)
+#define PHY_PLL_LOCKED BIT(9)
+#define PHY_PLL_OUTPUT BIT(10)
+#define PHY_LANE_A_STATUS 0x30
+#define PHY_LANE_B_STATUS 0x31
+#define PHY_LANE_C_STATUS 0x32
+#define PHY_LANE_D_STATUS 0x33
+#define PHY_LANE_RX_DET_SHIFT 11
+#define PHY_LANE_RX_DET_TH 0x1
+#define PHY_LANE_IDLE_OFF 0x1
+#define PHY_LANE_IDLE_MASK 0x1
+#define PHY_LANE_IDLE_A_SHIFT 3
+#define PHY_LANE_IDLE_B_SHIFT 4
+#define PHY_LANE_IDLE_C_SHIFT 5
+#define PHY_LANE_IDLE_D_SHIFT 6
+
+struct rockchip_pcie_data {
+ unsigned int pcie_conf;
+ unsigned int pcie_status;
+ unsigned int pcie_laneoff;
+};
+
+struct rockchip_pcie_phy {
+ struct rockchip_pcie_data *phy_data;
+ struct regmap *reg_base;
+ struct reset_control *phy_rst;
+ struct clk *clk_pciephy_ref;
+};
+
+static inline void phy_wr_cfg(struct rockchip_pcie_phy *rk_phy,
+ u32 addr, u32 data)
+{
+ regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+ HIWORD_UPDATE(data,
+ PHY_CFG_DATA_MASK,
+ PHY_CFG_DATA_SHIFT) |
+ HIWORD_UPDATE(addr,
+ PHY_CFG_ADDR_MASK,
+ PHY_CFG_ADDR_SHIFT));
+ udelay(1);
+ regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+ HIWORD_UPDATE(PHY_CFG_WR_ENABLE,
+ PHY_CFG_WR_MASK,
+ PHY_CFG_WR_SHIFT));
+ udelay(1);
+ regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+ HIWORD_UPDATE(PHY_CFG_WR_DISABLE,
+ PHY_CFG_WR_MASK,
+ PHY_CFG_WR_SHIFT));
+}
+
+static inline u32 phy_rd_cfg(struct rockchip_pcie_phy *rk_phy,
+ u32 addr)
+{
+ u32 val;
+
+ regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+ HIWORD_UPDATE(addr,
+ PHY_CFG_RD_MASK,
+ PHY_CFG_ADDR_SHIFT));
+ regmap_read(rk_phy->reg_base,
+ rk_phy->phy_data->pcie_status,
+ &val);
+ return val;
+}
+
+static int rockchip_pcie_phy_power_off(struct phy *phy)
+{
+ struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy);
+ int err = 0;
+
+ err = reset_control_assert(rk_phy->phy_rst);
+ if (err) {
+ dev_err(&phy->dev, "assert phy_rst err %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static int rockchip_pcie_phy_power_on(struct phy *phy)
+{
+ struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy);
+ int err = 0;
+ u32 status;
+ unsigned long timeout;
+
+ err = reset_control_deassert(rk_phy->phy_rst);
+ if (err) {
+ dev_err(&phy->dev, "deassert phy_rst err %d\n", err);
+ return err;
+ }
+
+ regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+ HIWORD_UPDATE(PHY_CFG_PLL_LOCK,
+ PHY_CFG_ADDR_MASK,
+ PHY_CFG_ADDR_SHIFT));
+
+ /*
+ * No documented timeout value for phy operation below,
+ * so we make it large enough here. And we use loop-break
+ * method which should not be harmful.
+ */
+ timeout = jiffies + msecs_to_jiffies(1000);
+
+ err = -EINVAL;
+ while (time_before(jiffies, timeout)) {
+ regmap_read(rk_phy->reg_base,
+ rk_phy->phy_data->pcie_status,
+ &status);
+ if (status & PHY_PLL_LOCKED) {
+ dev_dbg(&phy->dev, "pll locked!\n");
+ err = 0;
+ break;
+ }
+ msleep(20);
+ }
+
+ if (err) {
+ dev_err(&phy->dev, "pll lock timeout!\n");
+ goto err_pll_lock;
+ }
+
+ phy_wr_cfg(rk_phy, PHY_CFG_CLK_TEST, PHY_CFG_SEPE_RATE);
+ phy_wr_cfg(rk_phy, PHY_CFG_CLK_SCC, PHY_CFG_PLL_100M);
+
+ err = -ETIMEDOUT;
+ while (time_before(jiffies, timeout)) {
+ regmap_read(rk_phy->reg_base,
+ rk_phy->phy_data->pcie_status,
+ &status);
+ if (!(status & PHY_PLL_OUTPUT)) {
+ dev_dbg(&phy->dev, "pll output enable done!\n");
+ err = 0;
+ break;
+ }
+ msleep(20);
+ }
+
+ if (err) {
+ dev_err(&phy->dev, "pll output enable timeout!\n");
+ goto err_pll_lock;
+ }
+
+ regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+ HIWORD_UPDATE(PHY_CFG_PLL_LOCK,
+ PHY_CFG_ADDR_MASK,
+ PHY_CFG_ADDR_SHIFT));
+ err = -EINVAL;
+ while (time_before(jiffies, timeout)) {
+ regmap_read(rk_phy->reg_base,
+ rk_phy->phy_data->pcie_status,
+ &status);
+ if (status & PHY_PLL_LOCKED) {
+ dev_dbg(&phy->dev, "pll relocked!\n");
+ err = 0;
+ break;
+ }
+ msleep(20);
+ }
+
+ if (err) {
+ dev_err(&phy->dev, "pll relock timeout!\n");
+ goto err_pll_lock;
+ }
+
+ return 0;
+
+err_pll_lock:
+ reset_control_assert(rk_phy->phy_rst);
+ return err;
+}
+
+static int rockchip_pcie_phy_init(struct phy *phy)
+{
+ struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy);
+ int err = 0;
+
+ err = clk_prepare_enable(rk_phy->clk_pciephy_ref);
+ if (err) {
+ dev_err(&phy->dev, "Fail to enable pcie ref clock.\n");
+ goto err_refclk;
+ }
+
+ err = reset_control_assert(rk_phy->phy_rst);
+ if (err) {
+ dev_err(&phy->dev, "assert phy_rst err %d\n", err);
+ goto err_reset;
+ }
+
+ return err;
+
+err_reset:
+ clk_disable_unprepare(rk_phy->clk_pciephy_ref);
+err_refclk:
+ return err;
+}
+
+static int rockchip_pcie_phy_exit(struct phy *phy)
+{
+ struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy);
+ int err = 0;
+
+ clk_disable_unprepare(rk_phy->clk_pciephy_ref);
+
+ err = reset_control_deassert(rk_phy->phy_rst);
+ if (err) {
+ dev_err(&phy->dev, "deassert phy_rst err %d\n", err);
+ goto err_reset;
+ }
+
+ return err;
+
+err_reset:
+ clk_prepare_enable(rk_phy->clk_pciephy_ref);
+ return err;
+}
+
+static const struct phy_ops ops = {
+ .init = rockchip_pcie_phy_init,
+ .exit = rockchip_pcie_phy_exit,
+ .power_on = rockchip_pcie_phy_power_on,
+ .power_off = rockchip_pcie_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static const struct rockchip_pcie_data rk3399_pcie_data = {
+ .pcie_conf = 0xe220,
+ .pcie_status = 0xe2a4,
+ .pcie_laneoff = 0xe214,
+};
+
+static const struct of_device_id rockchip_pcie_phy_dt_ids[] = {
+ {
+ .compatible = "rockchip,rk3399-pcie-phy",
+ .data = &rk3399_pcie_data,
+ },
+ {}
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_pcie_phy_dt_ids);
+
+static int rockchip_pcie_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rockchip_pcie_phy *rk_phy;
+ struct phy *generic_phy;
+ struct phy_provider *phy_provider;
+ struct regmap *grf;
+ const struct of_device_id *of_id;
+
+ grf = syscon_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(grf)) {
+ dev_err(dev, "Cannot find GRF syscon\n");
+ return PTR_ERR(grf);
+ }
+
+ rk_phy = devm_kzalloc(dev, sizeof(*rk_phy), GFP_KERNEL);
+ if (!rk_phy)
+ return -ENOMEM;
+
+ of_id = of_match_device(rockchip_pcie_phy_dt_ids, &pdev->dev);
+ if (!of_id)
+ return -EINVAL;
+
+ rk_phy->phy_data = (struct rockchip_pcie_data *)of_id->data;
+ rk_phy->reg_base = grf;
+
+ rk_phy->phy_rst = devm_reset_control_get(dev, "phy");
+ if (IS_ERR(rk_phy->phy_rst)) {
+ if (PTR_ERR(rk_phy->phy_rst) != -EPROBE_DEFER)
+ dev_err(dev,
+ "missing phy property for reset controller\n");
+ return PTR_ERR(rk_phy->phy_rst);
+ }
+
+ rk_phy->clk_pciephy_ref = devm_clk_get(dev, "refclk");
+ if (IS_ERR(rk_phy->clk_pciephy_ref)) {
+ dev_err(dev, "refclk not found.\n");
+ return PTR_ERR(rk_phy->clk_pciephy_ref);
+ }
+
+ generic_phy = devm_phy_create(dev, dev->of_node, &ops);
+ if (IS_ERR(generic_phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(generic_phy);
+ }
+
+ phy_set_drvdata(generic_phy, rk_phy);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver rockchip_pcie_driver = {
+ .probe = rockchip_pcie_phy_probe,
+ .driver = {
+ .name = "rockchip-pcie-phy",
+ .of_match_table = rockchip_pcie_phy_dt_ids,
+ },
+};
+
+module_platform_driver(rockchip_pcie_driver);
+
+MODULE_AUTHOR("Shawn Lin <shawn.lin@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip PCIe PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-rockchip-typec.c b/drivers/phy/phy-rockchip-typec.c
new file mode 100644
index 000000000000..7cfb0f8995de
--- /dev/null
+++ b/drivers/phy/phy-rockchip-typec.c
@@ -0,0 +1,1023 @@
+/*
+ * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
+ * Author: Chris Zhong <zyw@rock-chips.com>
+ * Kever Yang <kever.yang@rock-chips.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * The ROCKCHIP Type-C PHY has two PLL clocks. The first PLL clock
+ * is used for USB3, the second PLL clock is used for DP. This Type-C PHY has
+ * 3 working modes: USB3 only mode, DP only mode, and USB3+DP mode.
+ * At USB3 only mode, both PLL clocks need to be initialized, this allows the
+ * PHY to switch mode between USB3 and USB3+DP, without disconnecting the USB
+ * device.
+ * In The DP only mode, only the DP PLL needs to be powered on, and the 4 lanes
+ * are all used for DP.
+ *
+ * This driver gets extcon cable state and property, then decides which mode to
+ * select:
+ *
+ * 1. USB3 only mode:
+ * EXTCON_USB or EXTCON_USB_HOST state is true, and
+ * EXTCON_PROP_USB_SS property is true.
+ * EXTCON_DISP_DP state is false.
+ *
+ * 2. DP only mode:
+ * EXTCON_DISP_DP state is true, and
+ * EXTCON_PROP_USB_SS property is false.
+ * If EXTCON_USB_HOST state is true, it is DP + USB2 mode, since the USB2 phy
+ * is a separate phy, so this case is still DP only mode.
+ *
+ * 3. USB3+DP mode:
+ * EXTCON_USB_HOST and EXTCON_DISP_DP are both true, and
+ * EXTCON_PROP_USB_SS property is true.
+ *
+ * This Type-C PHY driver supports normal and flip orientation. The orientation
+ * is reported by the EXTCON_PROP_USB_TYPEC_POLARITY property: true is flip
+ * orientation, false is normal orientation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/extcon.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#include <linux/mfd/syscon.h>
+#include <linux/phy/phy.h>
+
+#define CMN_SSM_BANDGAP (0x21 << 2)
+#define CMN_SSM_BIAS (0x22 << 2)
+#define CMN_PLLSM0_PLLEN (0x29 << 2)
+#define CMN_PLLSM0_PLLPRE (0x2a << 2)
+#define CMN_PLLSM0_PLLVREF (0x2b << 2)
+#define CMN_PLLSM0_PLLLOCK (0x2c << 2)
+#define CMN_PLLSM1_PLLEN (0x31 << 2)
+#define CMN_PLLSM1_PLLPRE (0x32 << 2)
+#define CMN_PLLSM1_PLLVREF (0x33 << 2)
+#define CMN_PLLSM1_PLLLOCK (0x34 << 2)
+#define CMN_PLLSM1_USER_DEF_CTRL (0x37 << 2)
+#define CMN_ICAL_OVRD (0xc1 << 2)
+#define CMN_PLL0_VCOCAL_OVRD (0x83 << 2)
+#define CMN_PLL0_VCOCAL_INIT (0x84 << 2)
+#define CMN_PLL0_VCOCAL_ITER (0x85 << 2)
+#define CMN_PLL0_LOCK_REFCNT_START (0x90 << 2)
+#define CMN_PLL0_LOCK_PLLCNT_START (0x92 << 2)
+#define CMN_PLL0_LOCK_PLLCNT_THR (0x93 << 2)
+#define CMN_PLL0_INTDIV (0x94 << 2)
+#define CMN_PLL0_FRACDIV (0x95 << 2)
+#define CMN_PLL0_HIGH_THR (0x96 << 2)
+#define CMN_PLL0_DSM_DIAG (0x97 << 2)
+#define CMN_PLL0_SS_CTRL1 (0x98 << 2)
+#define CMN_PLL0_SS_CTRL2 (0x99 << 2)
+#define CMN_PLL1_VCOCAL_START (0xa1 << 2)
+#define CMN_PLL1_VCOCAL_OVRD (0xa3 << 2)
+#define CMN_PLL1_VCOCAL_INIT (0xa4 << 2)
+#define CMN_PLL1_VCOCAL_ITER (0xa5 << 2)
+#define CMN_PLL1_LOCK_REFCNT_START (0xb0 << 2)
+#define CMN_PLL1_LOCK_PLLCNT_START (0xb2 << 2)
+#define CMN_PLL1_LOCK_PLLCNT_THR (0xb3 << 2)
+#define CMN_PLL1_INTDIV (0xb4 << 2)
+#define CMN_PLL1_FRACDIV (0xb5 << 2)
+#define CMN_PLL1_HIGH_THR (0xb6 << 2)
+#define CMN_PLL1_DSM_DIAG (0xb7 << 2)
+#define CMN_PLL1_SS_CTRL1 (0xb8 << 2)
+#define CMN_PLL1_SS_CTRL2 (0xb9 << 2)
+#define CMN_RXCAL_OVRD (0xd1 << 2)
+#define CMN_TXPUCAL_CTRL (0xe0 << 2)
+#define CMN_TXPUCAL_OVRD (0xe1 << 2)
+#define CMN_TXPDCAL_OVRD (0xf1 << 2)
+#define CMN_DIAG_PLL0_FBH_OVRD (0x1c0 << 2)
+#define CMN_DIAG_PLL0_FBL_OVRD (0x1c1 << 2)
+#define CMN_DIAG_PLL0_OVRD (0x1c2 << 2)
+#define CMN_DIAG_PLL0_V2I_TUNE (0x1c5 << 2)
+#define CMN_DIAG_PLL0_CP_TUNE (0x1c6 << 2)
+#define CMN_DIAG_PLL0_LF_PROG (0x1c7 << 2)
+#define CMN_DIAG_PLL1_FBH_OVRD (0x1d0 << 2)
+#define CMN_DIAG_PLL1_FBL_OVRD (0x1d1 << 2)
+#define CMN_DIAG_PLL1_OVRD (0x1d2 << 2)
+#define CMN_DIAG_PLL1_V2I_TUNE (0x1d5 << 2)
+#define CMN_DIAG_PLL1_CP_TUNE (0x1d6 << 2)
+#define CMN_DIAG_PLL1_LF_PROG (0x1d7 << 2)
+#define CMN_DIAG_PLL1_PTATIS_TUNE1 (0x1d8 << 2)
+#define CMN_DIAG_PLL1_PTATIS_TUNE2 (0x1d9 << 2)
+#define CMN_DIAG_PLL1_INCLK_CTRL (0x1da << 2)
+#define CMN_DIAG_HSCLK_SEL (0x1e0 << 2)
+
+#define XCVR_PSM_RCTRL(n) ((0x4001 | ((n) << 9)) << 2)
+#define XCVR_PSM_CAL_TMR(n) ((0x4002 | ((n) << 9)) << 2)
+#define XCVR_PSM_A0IN_TMR(n) ((0x4003 | ((n) << 9)) << 2)
+#define TX_TXCC_CAL_SCLR_MULT(n) ((0x4047 | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_00(n) ((0x404c | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_01(n) ((0x404d | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_10(n) ((0x404e | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_11(n) ((0x404f | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_000(n) ((0x4050 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_001(n) ((0x4051 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_010(n) ((0x4052 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_011(n) ((0x4053 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_100(n) ((0x4054 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_101(n) ((0x4055 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_110(n) ((0x4056 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_111(n) ((0x4057 | ((n) << 9)) << 2)
+#define XCVR_DIAG_PLLDRC_CTRL(n) ((0x40e0 | ((n) << 9)) << 2)
+#define XCVR_DIAG_BIDI_CTRL(n) ((0x40e8 | ((n) << 9)) << 2)
+#define XCVR_DIAG_LANE_FCM_EN_MGN(n) ((0x40f2 | ((n) << 9)) << 2)
+#define TX_PSC_A0(n) ((0x4100 | ((n) << 9)) << 2)
+#define TX_PSC_A1(n) ((0x4101 | ((n) << 9)) << 2)
+#define TX_PSC_A2(n) ((0x4102 | ((n) << 9)) << 2)
+#define TX_PSC_A3(n) ((0x4103 | ((n) << 9)) << 2)
+#define TX_RCVDET_CTRL(n) ((0x4120 | ((n) << 9)) << 2)
+#define TX_RCVDET_EN_TMR(n) ((0x4122 | ((n) << 9)) << 2)
+#define TX_RCVDET_ST_TMR(n) ((0x4123 | ((n) << 9)) << 2)
+#define TX_DIAG_TX_DRV(n) ((0x41e1 | ((n) << 9)) << 2)
+#define TX_DIAG_BGREF_PREDRV_DELAY (0x41e7 << 2)
+#define TX_ANA_CTRL_REG_1 (0x5020 << 2)
+#define TX_ANA_CTRL_REG_2 (0x5021 << 2)
+#define TXDA_COEFF_CALC_CTRL (0x5022 << 2)
+#define TX_DIG_CTRL_REG_2 (0x5024 << 2)
+#define TXDA_CYA_AUXDA_CYA (0x5025 << 2)
+#define TX_ANA_CTRL_REG_3 (0x5026 << 2)
+#define TX_ANA_CTRL_REG_4 (0x5027 << 2)
+#define TX_ANA_CTRL_REG_5 (0x5029 << 2)
+
+#define RX_PSC_A0(n) ((0x8000 | ((n) << 9)) << 2)
+#define RX_PSC_A1(n) ((0x8001 | ((n) << 9)) << 2)
+#define RX_PSC_A2(n) ((0x8002 | ((n) << 9)) << 2)
+#define RX_PSC_A3(n) ((0x8003 | ((n) << 9)) << 2)
+#define RX_PSC_CAL(n) ((0x8006 | ((n) << 9)) << 2)
+#define RX_PSC_RDY(n) ((0x8007 | ((n) << 9)) << 2)
+#define RX_IQPI_ILL_CAL_OVRD (0x8023 << 2)
+#define RX_EPI_ILL_CAL_OVRD (0x8033 << 2)
+#define RX_SDCAL0_OVRD (0x8041 << 2)
+#define RX_SDCAL1_OVRD (0x8049 << 2)
+#define RX_SLC_INIT (0x806d << 2)
+#define RX_SLC_RUN (0x806e << 2)
+#define RX_CDRLF_CNFG2 (0x8081 << 2)
+#define RX_SIGDET_HL_FILT_TMR(n) ((0x8090 | ((n) << 9)) << 2)
+#define RX_SLC_IOP0_OVRD (0x8101 << 2)
+#define RX_SLC_IOP1_OVRD (0x8105 << 2)
+#define RX_SLC_QOP0_OVRD (0x8109 << 2)
+#define RX_SLC_QOP1_OVRD (0x810d << 2)
+#define RX_SLC_EOP0_OVRD (0x8111 << 2)
+#define RX_SLC_EOP1_OVRD (0x8115 << 2)
+#define RX_SLC_ION0_OVRD (0x8119 << 2)
+#define RX_SLC_ION1_OVRD (0x811d << 2)
+#define RX_SLC_QON0_OVRD (0x8121 << 2)
+#define RX_SLC_QON1_OVRD (0x8125 << 2)
+#define RX_SLC_EON0_OVRD (0x8129 << 2)
+#define RX_SLC_EON1_OVRD (0x812d << 2)
+#define RX_SLC_IEP0_OVRD (0x8131 << 2)
+#define RX_SLC_IEP1_OVRD (0x8135 << 2)
+#define RX_SLC_QEP0_OVRD (0x8139 << 2)
+#define RX_SLC_QEP1_OVRD (0x813d << 2)
+#define RX_SLC_EEP0_OVRD (0x8141 << 2)
+#define RX_SLC_EEP1_OVRD (0x8145 << 2)
+#define RX_SLC_IEN0_OVRD (0x8149 << 2)
+#define RX_SLC_IEN1_OVRD (0x814d << 2)
+#define RX_SLC_QEN0_OVRD (0x8151 << 2)
+#define RX_SLC_QEN1_OVRD (0x8155 << 2)
+#define RX_SLC_EEN0_OVRD (0x8159 << 2)
+#define RX_SLC_EEN1_OVRD (0x815d << 2)
+#define RX_REE_CTRL_DATA_MASK(n) ((0x81bb | ((n) << 9)) << 2)
+#define RX_DIAG_SIGDET_TUNE(n) ((0x81dc | ((n) << 9)) << 2)
+#define RX_DIAG_SC2C_DELAY (0x81e1 << 2)
+
+#define PMA_LANE_CFG (0xc000 << 2)
+#define PIPE_CMN_CTRL1 (0xc001 << 2)
+#define PIPE_CMN_CTRL2 (0xc002 << 2)
+#define PIPE_COM_LOCK_CFG1 (0xc003 << 2)
+#define PIPE_COM_LOCK_CFG2 (0xc004 << 2)
+#define PIPE_RCV_DET_INH (0xc005 << 2)
+#define DP_MODE_CTL (0xc008 << 2)
+#define DP_CLK_CTL (0xc009 << 2)
+#define STS (0xc00F << 2)
+#define PHY_ISO_CMN_CTRL (0xc010 << 2)
+#define PHY_DP_TX_CTL (0xc408 << 2)
+#define PMA_CMN_CTRL1 (0xc800 << 2)
+#define PHY_PMA_ISO_CMN_CTRL (0xc810 << 2)
+#define PHY_ISOLATION_CTRL (0xc81f << 2)
+#define PHY_PMA_ISO_XCVR_CTRL(n) ((0xcc11 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_LINK_MODE(n) ((0xcc12 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_PWRST_CTRL(n) ((0xcc13 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_TX_DATA_LO(n) ((0xcc14 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_TX_DATA_HI(n) ((0xcc15 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_RX_DATA_LO(n) ((0xcc16 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_RX_DATA_HI(n) ((0xcc17 | ((n) << 6)) << 2)
+#define TX_BIST_CTRL(n) ((0x4140 | ((n) << 9)) << 2)
+#define TX_BIST_UDDWR(n) ((0x4141 | ((n) << 9)) << 2)
+
+/*
+ * Selects which PLL clock will be driven on the analog high speed
+ * clock 0: PLL 0 div 1
+ * clock 1: PLL 1 div 2
+ */
+#define CLK_PLL_CONFIG 0X30
+#define CLK_PLL_MASK 0x33
+
+#define CMN_READY BIT(0)
+
+#define DP_PLL_CLOCK_ENABLE BIT(2)
+#define DP_PLL_ENABLE BIT(0)
+#define DP_PLL_DATA_RATE_RBR ((2 << 12) | (4 << 8))
+#define DP_PLL_DATA_RATE_HBR ((2 << 12) | (4 << 8))
+#define DP_PLL_DATA_RATE_HBR2 ((1 << 12) | (2 << 8))
+
+#define DP_MODE_A0 BIT(4)
+#define DP_MODE_A2 BIT(6)
+#define DP_MODE_ENTER_A0 0xc101
+#define DP_MODE_ENTER_A2 0xc104
+
+#define PHY_MODE_SET_TIMEOUT 100000
+
+#define PIN_ASSIGN_C_E 0x51d9
+#define PIN_ASSIGN_D_F 0x5100
+
+#define MODE_DISCONNECT 0
+#define MODE_UFP_USB BIT(0)
+#define MODE_DFP_USB BIT(1)
+#define MODE_DFP_DP BIT(2)
+
+struct usb3phy_reg {
+ u32 offset;
+ u32 enable_bit;
+ u32 write_enable;
+};
+
+struct rockchip_usb3phy_port_cfg {
+ struct usb3phy_reg typec_conn_dir;
+ struct usb3phy_reg usb3tousb2_en;
+ struct usb3phy_reg external_psm;
+ struct usb3phy_reg pipe_status;
+};
+
+struct rockchip_typec_phy {
+ struct device *dev;
+ void __iomem *base;
+ struct extcon_dev *extcon;
+ struct regmap *grf_regs;
+ struct clk *clk_core;
+ struct clk *clk_ref;
+ struct reset_control *uphy_rst;
+ struct reset_control *pipe_rst;
+ struct reset_control *tcphy_rst;
+ struct rockchip_usb3phy_port_cfg port_cfgs;
+ /* mutex to protect access to individual PHYs */
+ struct mutex lock;
+
+ bool flip;
+ u8 mode;
+};
+
+struct phy_reg {
+ u16 value;
+ u32 addr;
+};
+
+struct phy_reg usb3_pll_cfg[] = {
+ { 0xf0, CMN_PLL0_VCOCAL_INIT },
+ { 0x18, CMN_PLL0_VCOCAL_ITER },
+ { 0xd0, CMN_PLL0_INTDIV },
+ { 0x4a4a, CMN_PLL0_FRACDIV },
+ { 0x34, CMN_PLL0_HIGH_THR },
+ { 0x1ee, CMN_PLL0_SS_CTRL1 },
+ { 0x7f03, CMN_PLL0_SS_CTRL2 },
+ { 0x20, CMN_PLL0_DSM_DIAG },
+ { 0, CMN_DIAG_PLL0_OVRD },
+ { 0, CMN_DIAG_PLL0_FBH_OVRD },
+ { 0, CMN_DIAG_PLL0_FBL_OVRD },
+ { 0x7, CMN_DIAG_PLL0_V2I_TUNE },
+ { 0x45, CMN_DIAG_PLL0_CP_TUNE },
+ { 0x8, CMN_DIAG_PLL0_LF_PROG },
+};
+
+struct phy_reg dp_pll_cfg[] = {
+ { 0xf0, CMN_PLL1_VCOCAL_INIT },
+ { 0x18, CMN_PLL1_VCOCAL_ITER },
+ { 0x30b9, CMN_PLL1_VCOCAL_START },
+ { 0x21c, CMN_PLL1_INTDIV },
+ { 0, CMN_PLL1_FRACDIV },
+ { 0x5, CMN_PLL1_HIGH_THR },
+ { 0x35, CMN_PLL1_SS_CTRL1 },
+ { 0x7f1e, CMN_PLL1_SS_CTRL2 },
+ { 0x20, CMN_PLL1_DSM_DIAG },
+ { 0, CMN_PLLSM1_USER_DEF_CTRL },
+ { 0, CMN_DIAG_PLL1_OVRD },
+ { 0, CMN_DIAG_PLL1_FBH_OVRD },
+ { 0, CMN_DIAG_PLL1_FBL_OVRD },
+ { 0x6, CMN_DIAG_PLL1_V2I_TUNE },
+ { 0x45, CMN_DIAG_PLL1_CP_TUNE },
+ { 0x8, CMN_DIAG_PLL1_LF_PROG },
+ { 0x100, CMN_DIAG_PLL1_PTATIS_TUNE1 },
+ { 0x7, CMN_DIAG_PLL1_PTATIS_TUNE2 },
+ { 0x4, CMN_DIAG_PLL1_INCLK_CTRL },
+};
+
+static void tcphy_cfg_24m(struct rockchip_typec_phy *tcphy)
+{
+ u32 i, rdata;
+
+ /*
+ * cmn_ref_clk_sel = 3, select the 24Mhz for clk parent
+ * cmn_psm_clk_dig_div = 2, set the clk division to 2
+ */
+ writel(0x830, tcphy->base + PMA_CMN_CTRL1);
+ for (i = 0; i < 4; i++) {
+ /*
+ * The following PHY configuration assumes a 24 MHz reference
+ * clock.
+ */
+ writel(0x90, tcphy->base + XCVR_DIAG_LANE_FCM_EN_MGN(i));
+ writel(0x960, tcphy->base + TX_RCVDET_EN_TMR(i));
+ writel(0x30, tcphy->base + TX_RCVDET_ST_TMR(i));
+ }
+
+ rdata = readl(tcphy->base + CMN_DIAG_HSCLK_SEL);
+ rdata &= ~CLK_PLL_MASK;
+ rdata |= CLK_PLL_CONFIG;
+ writel(rdata, tcphy->base + CMN_DIAG_HSCLK_SEL);
+}
+
+static void tcphy_cfg_usb3_pll(struct rockchip_typec_phy *tcphy)
+{
+ u32 i;
+
+ /* load the configuration of PLL0 */
+ for (i = 0; i < ARRAY_SIZE(usb3_pll_cfg); i++)
+ writel(usb3_pll_cfg[i].value,
+ tcphy->base + usb3_pll_cfg[i].addr);
+}
+
+static void tcphy_cfg_dp_pll(struct rockchip_typec_phy *tcphy)
+{
+ u32 i;
+
+ /* set the default mode to RBR */
+ writel(DP_PLL_CLOCK_ENABLE | DP_PLL_ENABLE | DP_PLL_DATA_RATE_RBR,
+ tcphy->base + DP_CLK_CTL);
+
+ /* load the configuration of PLL1 */
+ for (i = 0; i < ARRAY_SIZE(dp_pll_cfg); i++)
+ writel(dp_pll_cfg[i].value, tcphy->base + dp_pll_cfg[i].addr);
+}
+
+static void tcphy_tx_usb3_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
+{
+ writel(0x7799, tcphy->base + TX_PSC_A0(lane));
+ writel(0x7798, tcphy->base + TX_PSC_A1(lane));
+ writel(0x5098, tcphy->base + TX_PSC_A2(lane));
+ writel(0x5098, tcphy->base + TX_PSC_A3(lane));
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane));
+ writel(0xbf, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
+}
+
+static void tcphy_rx_usb3_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
+{
+ writel(0xa6fd, tcphy->base + RX_PSC_A0(lane));
+ writel(0xa6fd, tcphy->base + RX_PSC_A1(lane));
+ writel(0xa410, tcphy->base + RX_PSC_A2(lane));
+ writel(0x2410, tcphy->base + RX_PSC_A3(lane));
+ writel(0x23ff, tcphy->base + RX_PSC_CAL(lane));
+ writel(0x13, tcphy->base + RX_SIGDET_HL_FILT_TMR(lane));
+ writel(0x03e7, tcphy->base + RX_REE_CTRL_DATA_MASK(lane));
+ writel(0x1004, tcphy->base + RX_DIAG_SIGDET_TUNE(lane));
+ writel(0x2010, tcphy->base + RX_PSC_RDY(lane));
+ writel(0xfb, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
+}
+
+static void tcphy_dp_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
+{
+ u16 rdata;
+
+ writel(0xbefc, tcphy->base + XCVR_PSM_RCTRL(lane));
+ writel(0x6799, tcphy->base + TX_PSC_A0(lane));
+ writel(0x6798, tcphy->base + TX_PSC_A1(lane));
+ writel(0x98, tcphy->base + TX_PSC_A2(lane));
+ writel(0x98, tcphy->base + TX_PSC_A3(lane));
+
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane));
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_001(lane));
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_010(lane));
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_011(lane));
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_100(lane));
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_101(lane));
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_110(lane));
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_111(lane));
+ writel(0, tcphy->base + TX_TXCC_CPOST_MULT_10(lane));
+ writel(0, tcphy->base + TX_TXCC_CPOST_MULT_01(lane));
+ writel(0, tcphy->base + TX_TXCC_CPOST_MULT_00(lane));
+ writel(0, tcphy->base + TX_TXCC_CPOST_MULT_11(lane));
+
+ writel(0x128, tcphy->base + TX_TXCC_CAL_SCLR_MULT(lane));
+ writel(0x400, tcphy->base + TX_DIAG_TX_DRV(lane));
+
+ rdata = readl(tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane));
+ rdata = (rdata & 0x8fff) | 0x6000;
+ writel(rdata, tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane));
+}
+
+static inline int property_enable(struct rockchip_typec_phy *tcphy,
+ const struct usb3phy_reg *reg, bool en)
+{
+ u32 mask = 1 << reg->write_enable;
+ u32 val = en << reg->enable_bit;
+
+ return regmap_write(tcphy->grf_regs, reg->offset, val | mask);
+}
+
+static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy)
+{
+ u16 rdata, rdata2, val;
+
+ /* disable txda_cal_latch_en for rewrite the calibration values */
+ rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1);
+ val = rdata & 0xdfff;
+ writel(val, tcphy->base + TX_ANA_CTRL_REG_1);
+
+ /*
+ * read a resistor calibration code from CMN_TXPUCAL_CTRL[6:0] and
+ * write it to TX_DIG_CTRL_REG_2[6:0], and delay 1ms to make sure it
+ * works.
+ */
+ rdata = readl(tcphy->base + TX_DIG_CTRL_REG_2);
+ rdata = rdata & 0xffc0;
+
+ rdata2 = readl(tcphy->base + CMN_TXPUCAL_CTRL);
+ rdata2 = rdata2 & 0x3f;
+
+ val = rdata | rdata2;
+ writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
+ usleep_range(1000, 1050);
+
+ /*
+ * Enable signal for latch that sample and holds calibration values.
+ * Activate this signal for 1 clock cycle to sample new calibration
+ * values.
+ */
+ rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1);
+ val = rdata | 0x2000;
+ writel(val, tcphy->base + TX_ANA_CTRL_REG_1);
+ usleep_range(150, 200);
+
+ /* set TX Voltage Level and TX Deemphasis to 0 */
+ writel(0, tcphy->base + PHY_DP_TX_CTL);
+ /* re-enable decap */
+ writel(0x100, tcphy->base + TX_ANA_CTRL_REG_2);
+ writel(0x300, tcphy->base + TX_ANA_CTRL_REG_2);
+ writel(0x2008, tcphy->base + TX_ANA_CTRL_REG_1);
+ writel(0x2018, tcphy->base + TX_ANA_CTRL_REG_1);
+
+ writel(0, tcphy->base + TX_ANA_CTRL_REG_5);
+
+ /*
+ * Programs txda_drv_ldo_prog[15:0], Sets driver LDO
+ * voltage 16'h1001 for DP-AUX-TX and RX
+ */
+ writel(0x1001, tcphy->base + TX_ANA_CTRL_REG_4);
+
+ /* re-enables Bandgap reference for LDO */
+ writel(0x2098, tcphy->base + TX_ANA_CTRL_REG_1);
+ writel(0x2198, tcphy->base + TX_ANA_CTRL_REG_1);
+
+ /*
+ * re-enables the transmitter pre-driver, driver data selection MUX,
+ * and receiver detect circuits.
+ */
+ writel(0x301, tcphy->base + TX_ANA_CTRL_REG_2);
+ writel(0x303, tcphy->base + TX_ANA_CTRL_REG_2);
+
+ /*
+ * BIT 12: Controls auxda_polarity, which selects the polarity of the
+ * xcvr:
+ * 1, Reverses the polarity (If TYPEC, Pulls ups aux_p and pull
+ * down aux_m)
+ * 0, Normal polarity (if TYPE_C, pulls up aux_m and pulls down
+ * aux_p)
+ */
+ val = 0xa078;
+ if (!tcphy->flip)
+ val |= BIT(12);
+ writel(val, tcphy->base + TX_ANA_CTRL_REG_1);
+
+ writel(0, tcphy->base + TX_ANA_CTRL_REG_3);
+ writel(0, tcphy->base + TX_ANA_CTRL_REG_4);
+ writel(0, tcphy->base + TX_ANA_CTRL_REG_5);
+
+ /*
+ * Controls low_power_swing_en, set the voltage swing of the driver
+ * to 400mv. The values below are peak to peak (differential) values.
+ */
+ writel(4, tcphy->base + TXDA_COEFF_CALC_CTRL);
+ writel(0, tcphy->base + TXDA_CYA_AUXDA_CYA);
+
+ /* Controls tx_high_z_tm_en */
+ val = readl(tcphy->base + TX_DIG_CTRL_REG_2);
+ val |= BIT(15);
+ writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
+}
+
+static int tcphy_phy_init(struct rockchip_typec_phy *tcphy, u8 mode)
+{
+ struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+ int ret, i;
+ u32 val;
+
+ ret = clk_prepare_enable(tcphy->clk_core);
+ if (ret) {
+ dev_err(tcphy->dev, "Failed to prepare_enable core clock\n");
+ return ret;
+ }
+
+ ret = clk_prepare_enable(tcphy->clk_ref);
+ if (ret) {
+ dev_err(tcphy->dev, "Failed to prepare_enable ref clock\n");
+ goto err_clk_core;
+ }
+
+ reset_control_deassert(tcphy->tcphy_rst);
+
+ property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip);
+
+ tcphy_cfg_24m(tcphy);
+
+ if (mode == MODE_DFP_DP) {
+ tcphy_cfg_dp_pll(tcphy);
+ for (i = 0; i < 4; i++)
+ tcphy_dp_cfg_lane(tcphy, i);
+
+ writel(PIN_ASSIGN_C_E, tcphy->base + PMA_LANE_CFG);
+ } else {
+ tcphy_cfg_usb3_pll(tcphy);
+ tcphy_cfg_dp_pll(tcphy);
+ if (tcphy->flip) {
+ tcphy_tx_usb3_cfg_lane(tcphy, 3);
+ tcphy_rx_usb3_cfg_lane(tcphy, 2);
+ tcphy_dp_cfg_lane(tcphy, 0);
+ tcphy_dp_cfg_lane(tcphy, 1);
+ } else {
+ tcphy_tx_usb3_cfg_lane(tcphy, 0);
+ tcphy_rx_usb3_cfg_lane(tcphy, 1);
+ tcphy_dp_cfg_lane(tcphy, 2);
+ tcphy_dp_cfg_lane(tcphy, 3);
+ }
+
+ writel(PIN_ASSIGN_D_F, tcphy->base + PMA_LANE_CFG);
+ }
+
+ writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL);
+
+ reset_control_deassert(tcphy->uphy_rst);
+
+ ret = readx_poll_timeout(readl, tcphy->base + PMA_CMN_CTRL1,
+ val, val & CMN_READY, 10,
+ PHY_MODE_SET_TIMEOUT);
+ if (ret < 0) {
+ dev_err(tcphy->dev, "wait pma ready timeout\n");
+ ret = -ETIMEDOUT;
+ goto err_wait_pma;
+ }
+
+ reset_control_deassert(tcphy->pipe_rst);
+
+ return 0;
+
+err_wait_pma:
+ reset_control_assert(tcphy->uphy_rst);
+ reset_control_assert(tcphy->tcphy_rst);
+ clk_disable_unprepare(tcphy->clk_ref);
+err_clk_core:
+ clk_disable_unprepare(tcphy->clk_core);
+ return ret;
+}
+
+static void tcphy_phy_deinit(struct rockchip_typec_phy *tcphy)
+{
+ reset_control_assert(tcphy->tcphy_rst);
+ reset_control_assert(tcphy->uphy_rst);
+ reset_control_assert(tcphy->pipe_rst);
+ clk_disable_unprepare(tcphy->clk_core);
+ clk_disable_unprepare(tcphy->clk_ref);
+}
+
+static int tcphy_get_mode(struct rockchip_typec_phy *tcphy)
+{
+ struct extcon_dev *edev = tcphy->extcon;
+ union extcon_property_value property;
+ unsigned int id;
+ bool dfp, ufp, dp;
+ u8 mode;
+ int ret;
+
+ ufp = extcon_get_state(edev, EXTCON_USB);
+ dfp = extcon_get_state(edev, EXTCON_USB_HOST);
+ dp = extcon_get_state(edev, EXTCON_DISP_DP);
+
+ mode = MODE_DFP_USB;
+ id = EXTCON_USB_HOST;
+
+ if (ufp) {
+ mode = MODE_UFP_USB;
+ id = EXTCON_USB;
+ } else if (dp) {
+ mode = MODE_DFP_DP;
+ id = EXTCON_DISP_DP;
+
+ ret = extcon_get_property(edev, id, EXTCON_PROP_USB_SS,
+ &property);
+ if (ret) {
+ dev_err(tcphy->dev, "get superspeed property failed\n");
+ return ret;
+ }
+
+ if (property.intval)
+ mode |= MODE_DFP_USB;
+ }
+
+ ret = extcon_get_property(edev, id, EXTCON_PROP_USB_TYPEC_POLARITY,
+ &property);
+ if (ret) {
+ dev_err(tcphy->dev, "get polarity property failed\n");
+ return ret;
+ }
+
+ tcphy->flip = property.intval ? 1 : 0;
+
+ return mode;
+}
+
+static int rockchip_usb3_phy_power_on(struct phy *phy)
+{
+ struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
+ struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+ const struct usb3phy_reg *reg = &cfg->pipe_status;
+ int timeout, new_mode, ret = 0;
+ u32 val;
+
+ mutex_lock(&tcphy->lock);
+
+ new_mode = tcphy_get_mode(tcphy);
+ if (new_mode < 0) {
+ ret = new_mode;
+ goto unlock_ret;
+ }
+
+ /* DP-only mode; fall back to USB2 */
+ if (!(new_mode & (MODE_DFP_USB | MODE_UFP_USB)))
+ goto unlock_ret;
+
+ if (tcphy->mode == new_mode)
+ goto unlock_ret;
+
+ if (tcphy->mode == MODE_DISCONNECT)
+ tcphy_phy_init(tcphy, new_mode);
+
+ /* wait TCPHY for pipe ready */
+ for (timeout = 0; timeout < 100; timeout++) {
+ regmap_read(tcphy->grf_regs, reg->offset, &val);
+ if (!(val & BIT(reg->enable_bit))) {
+ tcphy->mode |= new_mode & (MODE_DFP_USB | MODE_UFP_USB);
+ goto unlock_ret;
+ }
+ usleep_range(10, 20);
+ }
+
+ if (tcphy->mode == MODE_DISCONNECT)
+ tcphy_phy_deinit(tcphy);
+
+ ret = -ETIMEDOUT;
+
+unlock_ret:
+ mutex_unlock(&tcphy->lock);
+ return ret;
+}
+
+static int rockchip_usb3_phy_power_off(struct phy *phy)
+{
+ struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
+
+ mutex_lock(&tcphy->lock);
+
+ if (tcphy->mode == MODE_DISCONNECT)
+ goto unlock;
+
+ tcphy->mode &= ~(MODE_UFP_USB | MODE_DFP_USB);
+ if (tcphy->mode == MODE_DISCONNECT)
+ tcphy_phy_deinit(tcphy);
+
+unlock:
+ mutex_unlock(&tcphy->lock);
+ return 0;
+}
+
+static const struct phy_ops rockchip_usb3_phy_ops = {
+ .power_on = rockchip_usb3_phy_power_on,
+ .power_off = rockchip_usb3_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int rockchip_dp_phy_power_on(struct phy *phy)
+{
+ struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
+ int new_mode, ret = 0;
+ u32 val;
+
+ mutex_lock(&tcphy->lock);
+
+ new_mode = tcphy_get_mode(tcphy);
+ if (new_mode < 0) {
+ ret = new_mode;
+ goto unlock_ret;
+ }
+
+ if (!(new_mode & MODE_DFP_DP)) {
+ ret = -ENODEV;
+ goto unlock_ret;
+ }
+
+ if (tcphy->mode == new_mode)
+ goto unlock_ret;
+
+ /*
+ * If the PHY has been power on, but the mode is not DP only mode,
+ * re-init the PHY for setting all of 4 lanes to DP.
+ */
+ if (new_mode == MODE_DFP_DP && tcphy->mode != MODE_DISCONNECT) {
+ tcphy_phy_deinit(tcphy);
+ tcphy_phy_init(tcphy, new_mode);
+ } else if (tcphy->mode == MODE_DISCONNECT) {
+ tcphy_phy_init(tcphy, new_mode);
+ }
+
+ ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL,
+ val, val & DP_MODE_A2, 1000,
+ PHY_MODE_SET_TIMEOUT);
+ if (ret < 0) {
+ dev_err(tcphy->dev, "failed to wait TCPHY enter A2\n");
+ goto power_on_finish;
+ }
+
+ tcphy_dp_aux_calibration(tcphy);
+
+ writel(DP_MODE_ENTER_A0, tcphy->base + DP_MODE_CTL);
+
+ ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL,
+ val, val & DP_MODE_A0, 1000,
+ PHY_MODE_SET_TIMEOUT);
+ if (ret < 0) {
+ writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL);
+ dev_err(tcphy->dev, "failed to wait TCPHY enter A0\n");
+ goto power_on_finish;
+ }
+
+ tcphy->mode |= MODE_DFP_DP;
+
+power_on_finish:
+ if (tcphy->mode == MODE_DISCONNECT)
+ tcphy_phy_deinit(tcphy);
+unlock_ret:
+ mutex_unlock(&tcphy->lock);
+ return ret;
+}
+
+static int rockchip_dp_phy_power_off(struct phy *phy)
+{
+ struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
+
+ mutex_lock(&tcphy->lock);
+
+ if (tcphy->mode == MODE_DISCONNECT)
+ goto unlock;
+
+ tcphy->mode &= ~MODE_DFP_DP;
+
+ writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL);
+
+ if (tcphy->mode == MODE_DISCONNECT)
+ tcphy_phy_deinit(tcphy);
+
+unlock:
+ mutex_unlock(&tcphy->lock);
+ return 0;
+}
+
+static const struct phy_ops rockchip_dp_phy_ops = {
+ .power_on = rockchip_dp_phy_power_on,
+ .power_off = rockchip_dp_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int tcphy_get_param(struct device *dev,
+ struct usb3phy_reg *reg,
+ const char *name)
+{
+ u32 buffer[3];
+ int ret;
+
+ ret = of_property_read_u32_array(dev->of_node, name, buffer, 3);
+ if (ret) {
+ dev_err(dev, "Can not parse %s\n", name);
+ return ret;
+ }
+
+ reg->offset = buffer[0];
+ reg->enable_bit = buffer[1];
+ reg->write_enable = buffer[2];
+ return 0;
+}
+
+static int tcphy_parse_dt(struct rockchip_typec_phy *tcphy,
+ struct device *dev)
+{
+ struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+ int ret;
+
+ ret = tcphy_get_param(dev, &cfg->typec_conn_dir,
+ "rockchip,typec-conn-dir");
+ if (ret)
+ return ret;
+
+ ret = tcphy_get_param(dev, &cfg->usb3tousb2_en,
+ "rockchip,usb3tousb2-en");
+ if (ret)
+ return ret;
+
+ ret = tcphy_get_param(dev, &cfg->external_psm,
+ "rockchip,external-psm");
+ if (ret)
+ return ret;
+
+ ret = tcphy_get_param(dev, &cfg->pipe_status,
+ "rockchip,pipe-status");
+ if (ret)
+ return ret;
+
+ tcphy->grf_regs = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "rockchip,grf");
+ if (IS_ERR(tcphy->grf_regs)) {
+ dev_err(dev, "could not find grf dt node\n");
+ return PTR_ERR(tcphy->grf_regs);
+ }
+
+ tcphy->clk_core = devm_clk_get(dev, "tcpdcore");
+ if (IS_ERR(tcphy->clk_core)) {
+ dev_err(dev, "could not get uphy core clock\n");
+ return PTR_ERR(tcphy->clk_core);
+ }
+
+ tcphy->clk_ref = devm_clk_get(dev, "tcpdphy-ref");
+ if (IS_ERR(tcphy->clk_ref)) {
+ dev_err(dev, "could not get uphy ref clock\n");
+ return PTR_ERR(tcphy->clk_ref);
+ }
+
+ tcphy->uphy_rst = devm_reset_control_get(dev, "uphy");
+ if (IS_ERR(tcphy->uphy_rst)) {
+ dev_err(dev, "no uphy_rst reset control found\n");
+ return PTR_ERR(tcphy->uphy_rst);
+ }
+
+ tcphy->pipe_rst = devm_reset_control_get(dev, "uphy-pipe");
+ if (IS_ERR(tcphy->pipe_rst)) {
+ dev_err(dev, "no pipe_rst reset control found\n");
+ return PTR_ERR(tcphy->pipe_rst);
+ }
+
+ tcphy->tcphy_rst = devm_reset_control_get(dev, "uphy-tcphy");
+ if (IS_ERR(tcphy->tcphy_rst)) {
+ dev_err(dev, "no tcphy_rst reset control found\n");
+ return PTR_ERR(tcphy->tcphy_rst);
+ }
+
+ return 0;
+}
+
+static void typec_phy_pre_init(struct rockchip_typec_phy *tcphy)
+{
+ struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+
+ reset_control_assert(tcphy->tcphy_rst);
+ reset_control_assert(tcphy->uphy_rst);
+ reset_control_assert(tcphy->pipe_rst);
+
+ /* select external psm clock */
+ property_enable(tcphy, &cfg->external_psm, 1);
+ property_enable(tcphy, &cfg->usb3tousb2_en, 0);
+
+ tcphy->mode = MODE_DISCONNECT;
+}
+
+static int rockchip_typec_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct device_node *child_np;
+ struct rockchip_typec_phy *tcphy;
+ struct phy_provider *phy_provider;
+ struct resource *res;
+ int ret;
+
+ tcphy = devm_kzalloc(dev, sizeof(*tcphy), GFP_KERNEL);
+ if (!tcphy)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ tcphy->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(tcphy->base))
+ return PTR_ERR(tcphy->base);
+
+ ret = tcphy_parse_dt(tcphy, dev);
+ if (ret)
+ return ret;
+
+ tcphy->dev = dev;
+ platform_set_drvdata(pdev, tcphy);
+ mutex_init(&tcphy->lock);
+
+ typec_phy_pre_init(tcphy);
+
+ tcphy->extcon = extcon_get_edev_by_phandle(dev, 0);
+ if (IS_ERR(tcphy->extcon)) {
+ if (PTR_ERR(tcphy->extcon) != -EPROBE_DEFER)
+ dev_err(dev, "Invalid or missing extcon\n");
+ return PTR_ERR(tcphy->extcon);
+ }
+
+ pm_runtime_enable(dev);
+
+ for_each_available_child_of_node(np, child_np) {
+ struct phy *phy;
+
+ if (!of_node_cmp(child_np->name, "dp-port"))
+ phy = devm_phy_create(dev, child_np,
+ &rockchip_dp_phy_ops);
+ else if (!of_node_cmp(child_np->name, "usb3-port"))
+ phy = devm_phy_create(dev, child_np,
+ &rockchip_usb3_phy_ops);
+ else
+ continue;
+
+ if (IS_ERR(phy)) {
+ dev_err(dev, "failed to create phy: %s\n",
+ child_np->name);
+ return PTR_ERR(phy);
+ }
+
+ phy_set_drvdata(phy, tcphy);
+ }
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(phy_provider)) {
+ dev_err(dev, "Failed to register phy provider\n");
+ return PTR_ERR(phy_provider);
+ }
+
+ return 0;
+}
+
+static int rockchip_typec_phy_remove(struct platform_device *pdev)
+{
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+static const struct of_device_id rockchip_typec_phy_dt_ids[] = {
+ { .compatible = "rockchip,rk3399-typec-phy" },
+ {}
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_typec_phy_dt_ids);
+
+static struct platform_driver rockchip_typec_phy_driver = {
+ .probe = rockchip_typec_phy_probe,
+ .remove = rockchip_typec_phy_remove,
+ .driver = {
+ .name = "rockchip-typec-phy",
+ .of_match_table = rockchip_typec_phy_dt_ids,
+ },
+};
+
+module_platform_driver(rockchip_typec_phy_driver);
+
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_AUTHOR("Kever Yang <kever.yang@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip USB TYPE-C PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c
index 2a7381f4fe4c..734987fa0ad7 100644
--- a/drivers/phy/phy-rockchip-usb.c
+++ b/drivers/phy/phy-rockchip-usb.c
@@ -29,6 +29,7 @@
#include <linux/reset.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
+#include <linux/delay.h>
static int enable_usb_uart;
@@ -64,6 +65,7 @@ struct rockchip_usb_phy {
struct clk_hw clk480m_hw;
struct phy *phy;
bool uart_enabled;
+ struct reset_control *reset;
};
static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy,
@@ -144,9 +146,23 @@ static int rockchip_usb_phy_power_on(struct phy *_phy)
return clk_prepare_enable(phy->clk480m);
}
+static int rockchip_usb_phy_reset(struct phy *_phy)
+{
+ struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
+
+ if (phy->reset) {
+ reset_control_assert(phy->reset);
+ udelay(10);
+ reset_control_deassert(phy->reset);
+ }
+
+ return 0;
+}
+
static const struct phy_ops ops = {
.power_on = rockchip_usb_phy_power_on,
.power_off = rockchip_usb_phy_power_off,
+ .reset = rockchip_usb_phy_reset,
.owner = THIS_MODULE,
};
@@ -185,6 +201,10 @@ static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base,
return -EINVAL;
}
+ rk_phy->reset = of_reset_control_get(child, "phy-reset");
+ if (IS_ERR(rk_phy->reset))
+ rk_phy->reset = NULL;
+
rk_phy->reg_offset = reg_offset;
rk_phy->clk = of_clk_get_by_name(child, "phyclk");
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index 8c7eb335622e..b9342a2af7b3 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -40,6 +40,7 @@
#include <linux/power_supply.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
+#include <linux/spinlock.h>
#include <linux/usb/of.h>
#include <linux/workqueue.h>
@@ -50,7 +51,7 @@
#define REG_PHYCTL_A33 0x10
#define REG_PHY_UNK_H3 0x20
-#define REG_PMU_UNK_H3 0x10
+#define REG_PMU_UNK1 0x10
#define PHYCTL_DATA BIT(7)
@@ -98,6 +99,7 @@ enum sun4i_usb_phy_type {
sun6i_a31_phy,
sun8i_a33_phy,
sun8i_h3_phy,
+ sun50i_a64_phy,
};
struct sun4i_usb_phy_cfg {
@@ -106,13 +108,14 @@ struct sun4i_usb_phy_cfg {
u32 disc_thresh;
u8 phyctl_offset;
bool dedicated_clocks;
+ bool enable_pmu_unk1;
};
struct sun4i_usb_phy_data {
void __iomem *base;
const struct sun4i_usb_phy_cfg *cfg;
enum usb_dr_mode dr_mode;
- struct mutex mutex;
+ spinlock_t reg_lock; /* guard access to phyctl reg */
struct sun4i_usb_phy {
struct phy *phy;
void __iomem *pmu;
@@ -122,7 +125,6 @@ struct sun4i_usb_phy_data {
bool regulator_on;
int index;
} phys[MAX_PHYS];
- int first_phy;
/* phy0 / otg related variables */
struct extcon_dev *extcon;
bool phy0_init;
@@ -131,6 +133,7 @@ struct sun4i_usb_phy_data {
struct power_supply *vbus_power_supply;
struct notifier_block vbus_power_nb;
bool vbus_power_nb_registered;
+ bool force_session_end;
int id_det_irq;
int vbus_det_irq;
int id_det;
@@ -179,12 +182,14 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy);
u32 temp, usbc_bit = BIT(phy->index * 2);
void __iomem *phyctl = phy_data->base + phy_data->cfg->phyctl_offset;
+ unsigned long flags;
int i;
- mutex_lock(&phy_data->mutex);
+ spin_lock_irqsave(&phy_data->reg_lock, flags);
- if (phy_data->cfg->type == sun8i_a33_phy) {
- /* A33 needs us to set phyctl to 0 explicitly */
+ if (phy_data->cfg->type == sun8i_a33_phy ||
+ phy_data->cfg->type == sun50i_a64_phy) {
+ /* A33 or A64 needs us to set phyctl to 0 explicitly */
writel(0, phyctl);
}
@@ -218,7 +223,8 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
data >>= 1;
}
- mutex_unlock(&phy_data->mutex);
+
+ spin_unlock_irqrestore(&phy_data->reg_lock, flags);
}
static void sun4i_usb_phy_passby(struct sun4i_usb_phy *phy, int enable)
@@ -258,14 +264,16 @@ static int sun4i_usb_phy_init(struct phy *_phy)
return ret;
}
+ if (data->cfg->enable_pmu_unk1) {
+ val = readl(phy->pmu + REG_PMU_UNK1);
+ writel(val & ~2, phy->pmu + REG_PMU_UNK1);
+ }
+
if (data->cfg->type == sun8i_h3_phy) {
if (phy->index == 0) {
val = readl(data->base + REG_PHY_UNK_H3);
writel(val & ~1, data->base + REG_PHY_UNK_H3);
}
-
- val = readl(phy->pmu + REG_PMU_UNK_H3);
- writel(val & ~2, phy->pmu + REG_PMU_UNK_H3);
} else {
/* Enable USB 45 Ohm resistor calibration */
if (phy->index == 0)
@@ -320,7 +328,10 @@ static int sun4i_usb_phy0_get_id_det(struct sun4i_usb_phy_data *data)
{
switch (data->dr_mode) {
case USB_DR_MODE_OTG:
- return gpiod_get_value_cansleep(data->id_det_gpio);
+ if (data->id_det_gpio)
+ return gpiod_get_value_cansleep(data->id_det_gpio);
+ else
+ return 1; /* Fallback to peripheral mode */
case USB_DR_MODE_HOST:
return 0;
case USB_DR_MODE_PERIPHERAL:
@@ -382,8 +393,10 @@ static int sun4i_usb_phy_power_on(struct phy *_phy)
/* For phy0 only turn on Vbus if we don't have an ext. Vbus */
if (phy->index == 0 && sun4i_usb_phy0_have_vbus_det(data) &&
- data->vbus_det)
+ data->vbus_det) {
+ dev_warn(&_phy->dev, "External vbus detected, not enabling our own vbus\n");
return 0;
+ }
ret = regulator_enable(phy->vbus);
if (ret)
@@ -419,6 +432,35 @@ static int sun4i_usb_phy_power_off(struct phy *_phy)
return 0;
}
+static int sun4i_usb_phy_set_mode(struct phy *_phy, enum phy_mode mode)
+{
+ struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
+ struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
+
+ if (phy->index != 0)
+ return -EINVAL;
+
+ switch (mode) {
+ case PHY_MODE_USB_HOST:
+ data->dr_mode = USB_DR_MODE_HOST;
+ break;
+ case PHY_MODE_USB_DEVICE:
+ data->dr_mode = USB_DR_MODE_PERIPHERAL;
+ break;
+ case PHY_MODE_USB_OTG:
+ data->dr_mode = USB_DR_MODE_OTG;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ dev_info(&_phy->dev, "Changing dr_mode to %d\n", (int)data->dr_mode);
+ data->force_session_end = true;
+ queue_delayed_work(system_wq, &data->detect, 0);
+
+ return 0;
+}
+
void sun4i_usb_phy_set_squelch_detect(struct phy *_phy, bool enabled)
{
struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
@@ -432,6 +474,7 @@ static const struct phy_ops sun4i_usb_phy_ops = {
.exit = sun4i_usb_phy_exit,
.power_on = sun4i_usb_phy_power_on,
.power_off = sun4i_usb_phy_power_off,
+ .set_mode = sun4i_usb_phy_set_mode,
.owner = THIS_MODULE,
};
@@ -440,7 +483,8 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
struct sun4i_usb_phy_data *data =
container_of(work, struct sun4i_usb_phy_data, detect.work);
struct phy *phy0 = data->phys[0].phy;
- int id_det, vbus_det, id_notify = 0, vbus_notify = 0;
+ bool force_session_end, id_notify = false, vbus_notify = false;
+ int id_det, vbus_det;
if (phy0 == NULL)
return;
@@ -455,27 +499,30 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
return;
}
+ force_session_end = data->force_session_end;
+ data->force_session_end = false;
+
if (id_det != data->id_det) {
- /*
- * When a host cable (id == 0) gets plugged in on systems
- * without vbus detection report vbus low for long enough for
- * the musb-ip to end the current device session.
- */
+ /* id-change, force session end if we've no vbus detection */
if (data->dr_mode == USB_DR_MODE_OTG &&
- !sun4i_usb_phy0_have_vbus_det(data) && id_det == 0) {
+ !sun4i_usb_phy0_have_vbus_det(data))
+ force_session_end = true;
+
+ /* When entering host mode (id = 0) force end the session now */
+ if (force_session_end && id_det == 0) {
sun4i_usb_phy0_set_vbus_detect(phy0, 0);
msleep(200);
sun4i_usb_phy0_set_vbus_detect(phy0, 1);
}
sun4i_usb_phy0_set_id_detect(phy0, id_det);
data->id_det = id_det;
- id_notify = 1;
+ id_notify = true;
}
if (vbus_det != data->vbus_det) {
sun4i_usb_phy0_set_vbus_detect(phy0, vbus_det);
data->vbus_det = vbus_det;
- vbus_notify = 1;
+ vbus_notify = true;
}
mutex_unlock(&phy0->mutex);
@@ -483,13 +530,8 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
if (id_notify) {
extcon_set_cable_state_(data->extcon, EXTCON_USB_HOST,
!id_det);
- /*
- * When a host cable gets unplugged (id == 1) on systems
- * without vbus detection report vbus low for long enough to
- * the musb-ip to end the current host session.
- */
- if (data->dr_mode == USB_DR_MODE_OTG &&
- !sun4i_usb_phy0_have_vbus_det(data) && id_det == 1) {
+ /* When leaving host mode force end the session here */
+ if (force_session_end && id_det == 1) {
mutex_lock(&phy0->mutex);
sun4i_usb_phy0_set_vbus_detect(phy0, 0);
msleep(1000);
@@ -534,8 +576,7 @@ static struct phy *sun4i_usb_phy_xlate(struct device *dev,
{
struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);
- if (args->args[0] < data->first_phy ||
- args->args[0] >= data->cfg->num_phys)
+ if (args->args[0] >= data->cfg->num_phys)
return ERR_PTR(-ENODEV);
return data->phys[args->args[0]].phy;
@@ -577,7 +618,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
if (!data)
return -ENOMEM;
- mutex_init(&data->mutex);
+ spin_lock_init(&data->reg_lock);
INIT_DELAYED_WORK(&data->detect, sun4i_usb_phy0_id_vbus_det_scan);
dev_set_drvdata(dev, data);
data->cfg = of_device_get_match_data(dev);
@@ -610,33 +651,18 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
}
data->dr_mode = of_usb_get_dr_mode_by_phy(np, 0);
- switch (data->dr_mode) {
- case USB_DR_MODE_OTG:
- /* otg without id_det makes no sense, and is not supported */
- if (!data->id_det_gpio) {
- dev_err(dev, "usb0_id_det missing or invalid\n");
- return -ENODEV;
- }
- /* fall through */
- case USB_DR_MODE_HOST:
- case USB_DR_MODE_PERIPHERAL:
- data->extcon = devm_extcon_dev_allocate(dev,
- sun4i_usb_phy0_cable);
- if (IS_ERR(data->extcon))
- return PTR_ERR(data->extcon);
- ret = devm_extcon_dev_register(dev, data->extcon);
- if (ret) {
- dev_err(dev, "failed to register extcon: %d\n", ret);
- return ret;
- }
- break;
- default:
- dev_info(dev, "dr_mode unknown, not registering usb phy0\n");
- data->first_phy = 1;
+ data->extcon = devm_extcon_dev_allocate(dev, sun4i_usb_phy0_cable);
+ if (IS_ERR(data->extcon))
+ return PTR_ERR(data->extcon);
+
+ ret = devm_extcon_dev_register(dev, data->extcon);
+ if (ret) {
+ dev_err(dev, "failed to register extcon: %d\n", ret);
+ return ret;
}
- for (i = data->first_phy; i < data->cfg->num_phys; i++) {
+ for (i = 0; i < data->cfg->num_phys; i++) {
struct sun4i_usb_phy *phy = data->phys + i;
char name[16];
@@ -737,6 +763,7 @@ static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
+ .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
@@ -745,6 +772,7 @@ static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
.disc_thresh = 2,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
+ .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
@@ -753,6 +781,7 @@ static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = true,
+ .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
@@ -761,6 +790,7 @@ static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
.disc_thresh = 2,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
+ .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
@@ -769,6 +799,7 @@ static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = true,
+ .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
@@ -777,6 +808,7 @@ static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
+ .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
@@ -784,6 +816,16 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
.type = sun8i_h3_phy,
.disc_thresh = 3,
.dedicated_clocks = true,
+ .enable_pmu_unk1 = true,
+};
+
+static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
+ .num_phys = 2,
+ .type = sun50i_a64_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A33,
+ .dedicated_clocks = true,
+ .enable_pmu_unk1 = true,
};
static const struct of_device_id sun4i_usb_phy_of_match[] = {
@@ -794,6 +836,8 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
{ .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg },
{ .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
{ .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg },
+ { .compatible = "allwinner,sun50i-a64-usb-phy",
+ .data = &sun50i_a64_cfg},
{ },
};
MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
index d9b10a39a2cf..87e6334eab93 100644
--- a/drivers/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -172,6 +172,7 @@ struct twl4030_usb {
int irq;
enum musb_vbus_id_status linkstat;
bool vbus_supplied;
+ bool musb_mailbox_pending;
struct delayed_work id_workaround_work;
};
@@ -439,6 +440,17 @@ static int __maybe_unused twl4030_usb_runtime_resume(struct device *dev)
(PHY_CLK_CTRL_CLOCKGATING_EN |
PHY_CLK_CTRL_CLK32K_EN));
+ twl4030_i2c_access(twl, 1);
+ twl4030_usb_set_mode(twl, twl->usb_mode);
+ if (twl->usb_mode == T2_USB_MODE_ULPI)
+ twl4030_i2c_access(twl, 0);
+ /*
+ * According to the TPS65950 TRM, there has to be at least 50ms
+ * delay between setting POWER_CTRL_OTG_ENAB and enabling charging
+ * so wait here so that a fully enabled phy can be expected after
+ * resume
+ */
+ msleep(50);
return 0;
}
@@ -459,11 +471,6 @@ static int twl4030_phy_power_on(struct phy *phy)
dev_dbg(twl->dev, "%s\n", __func__);
pm_runtime_get_sync(twl->dev);
- twl4030_i2c_access(twl, 1);
- twl4030_usb_set_mode(twl, twl->usb_mode);
- if (twl->usb_mode == T2_USB_MODE_ULPI)
- twl4030_i2c_access(twl, 0);
- twl->linkstat = MUSB_UNKNOWN;
schedule_delayed_work(&twl->id_workaround_work, HZ);
return 0;
@@ -569,9 +576,12 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
pm_runtime_mark_last_busy(twl->dev);
pm_runtime_put_autosuspend(twl->dev);
}
+ twl->musb_mailbox_pending = true;
+ }
+ if (twl->musb_mailbox_pending) {
err = musb_mailbox(status);
- if (err)
- twl->linkstat = MUSB_UNKNOWN;
+ if (!err)
+ twl->musb_mailbox_pending = false;
}
/* don't schedule during sleep - irq works right then */
@@ -676,6 +686,7 @@ static int twl4030_usb_probe(struct platform_device *pdev)
twl->irq = platform_get_irq(pdev, 0);
twl->vbus_supplied = false;
twl->linkstat = MUSB_UNKNOWN;
+ twl->musb_mailbox_pending = false;
twl->phy.dev = twl->dev;
twl->phy.label = "twl4030";
diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
index ec83dfdbc206..873424ab0e32 100644
--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -18,6 +18,7 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/phy/phy.h>
+#include <linux/phy/tegra/xusb.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
@@ -101,7 +102,8 @@ tegra_xusb_pad_find_phy_node(struct tegra_xusb_pad *pad, unsigned int index)
return of_find_node_by_name(np, pad->soc->lanes[index].name);
}
-int tegra_xusb_lane_lookup_function(struct tegra_xusb_lane *lane,
+static int
+tegra_xusb_lane_lookup_function(struct tegra_xusb_lane *lane,
const char *function)
{
unsigned int i;
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 8689dcba5201..644e978cbd3e 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -152,7 +152,8 @@ source "drivers/usb/gadget/Kconfig"
config USB_LED_TRIG
bool "USB LED Triggers"
- depends on LEDS_CLASS && USB_COMMON && LEDS_TRIGGERS
+ depends on LEDS_CLASS && LEDS_TRIGGERS
+ select USB_COMMON
help
This option adds LED triggers for USB host and/or gadget activity.
@@ -160,4 +161,25 @@ config USB_LED_TRIG
LEDs and you want to use them as activity indicators for USB host or
gadget.
+config USB_ULPI_BUS
+ tristate "USB ULPI PHY interface support"
+ select USB_COMMON
+ help
+ UTMI+ Low Pin Interface (ULPI) is specification for a commonly used
+ USB 2.0 PHY interface. The ULPI specification defines a standard set
+ of registers that can be used to detect the vendor and product which
+ allows ULPI to be handled as a bus. This module is the driver for that
+ bus.
+
+ The ULPI interfaces (the buses) are registered by the drivers for USB
+ controllers which support ULPI register access and have ULPI PHY
+ attached to them. The ULPI PHY drivers themselves are normal PHY
+ drivers.
+
+ ULPI PHYs provide often functions such as ADP sensing/probing (OTG
+ protocol) and USB charger detection.
+
+ To compile this driver as a module, choose M here: the module will
+ be called ulpi.
+
endif # USB_SUPPORT
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 0a866e90b49c..f9fe86b6f7b5 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -1139,10 +1139,8 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
/* instance init */
instance = kzalloc(sizeof(*instance), GFP_KERNEL);
- if (!instance) {
- usb_dbg(usbatm_instance, "cxacru_bind: no memory for instance data\n");
+ if (!instance)
return -ENOMEM;
- }
instance->usbatm = usbatm_instance;
instance->modem_type = (struct cxacru_modem_type *) id->driver_info;
@@ -1168,13 +1166,11 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
}
instance->rcv_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!instance->rcv_urb) {
- usb_dbg(usbatm_instance, "cxacru_bind: no memory for rcv_urb\n");
ret = -ENOMEM;
goto fail;
}
instance->snd_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!instance->snd_urb) {
- usb_dbg(usbatm_instance, "cxacru_bind: no memory for snd_urb\n");
ret = -ENOMEM;
goto fail;
}
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index 0270d1312f83..5083eb5b0d5e 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -817,7 +817,6 @@ static int speedtch_bind(struct usbatm_data *usbatm,
instance = kzalloc(sizeof(*instance), GFP_KERNEL);
if (!instance) {
- usb_err(usbatm, "%s: no memory for instance data!\n", __func__);
ret = -ENOMEM;
goto fail_release;
}
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index 4333dc576a12..df67815f74e6 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -2196,17 +2196,12 @@ static int uea_boot(struct uea_softc *sc)
load_XILINX_firmware(sc);
intr = kmalloc(size, GFP_KERNEL);
- if (!intr) {
- uea_err(INS_TO_USBDEV(sc),
- "cannot allocate interrupt package\n");
+ if (!intr)
goto err0;
- }
sc->urb_int = usb_alloc_urb(0, GFP_KERNEL);
- if (!sc->urb_int) {
- uea_err(INS_TO_USBDEV(sc), "cannot allocate interrupt URB\n");
+ if (!sc->urb_int)
goto err1;
- }
usb_fill_int_urb(sc->urb_int, sc->usb_dev,
usb_rcvintpipe(sc->usb_dev, UEA_INTR_PIPE),
@@ -2561,10 +2556,8 @@ static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf,
}
sc = kzalloc(sizeof(struct uea_softc), GFP_KERNEL);
- if (!sc) {
- uea_err(usb, "uea_init: not enough memory !\n");
+ if (!sc)
return -ENOMEM;
- }
sc->usb_dev = usb;
usbatm->driver_data = sc;
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index db322d9ccb6e..4dec9df8764b 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -819,7 +819,6 @@ static int usbatm_atm_open(struct atm_vcc *vcc)
new = kzalloc(sizeof(struct usbatm_vcc_data), GFP_KERNEL);
if (!new) {
- atm_err(instance, "%s: no memory for vcc_data!\n", __func__);
ret = -ENOMEM;
goto fail;
}
@@ -1032,10 +1031,8 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id,
/* instance init */
instance = kzalloc(sizeof(*instance) + sizeof(struct urb *) * (num_rcv_urbs + num_snd_urbs), GFP_KERNEL);
- if (!instance) {
- dev_err(dev, "%s: no memory for instance data!\n", __func__);
+ if (!instance)
return -ENOMEM;
- }
/* public fields */
@@ -1141,7 +1138,6 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id,
urb = usb_alloc_urb(iso_packets, GFP_KERNEL);
if (!urb) {
- dev_err(dev, "%s: no memory for urb %d!\n", __func__, i);
error = -ENOMEM;
goto fail_unbind;
}
@@ -1151,7 +1147,6 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id,
/* zero the tx padding to avoid leaking information */
buffer = kzalloc(channel->buf_size, GFP_KERNEL);
if (!buffer) {
- dev_err(dev, "%s: no memory for buffer %d!\n", __func__, i);
error = -ENOMEM;
goto fail_unbind;
}
@@ -1182,7 +1177,6 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id,
instance->cell_buf = kmalloc(instance->rx_channel.stride, GFP_KERNEL);
if (!instance->cell_buf) {
- dev_err(dev, "%s: no memory for cell buffer!\n", __func__);
error = -ENOMEM;
goto fail_unbind;
}
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index dedc33e589f4..099179457f60 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -140,6 +140,9 @@ static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev)
if (of_find_property(np, "disable-over-current", NULL))
data->disable_oc = 1;
+ if (of_find_property(np, "over-current-active-high", NULL))
+ data->oc_polarity = 1;
+
if (of_find_property(np, "external-vbus-divider", NULL))
data->evdo = 1;
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.h b/drivers/usb/chipidea/ci_hdrc_imx.h
index 635717e9354a..409aa5ca8dda 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.h
+++ b/drivers/usb/chipidea/ci_hdrc_imx.h
@@ -17,6 +17,7 @@ struct imx_usbmisc_data {
int index;
unsigned int disable_oc:1; /* over current detect disabled */
+ unsigned int oc_polarity:1; /* over current polarity if oc enabled */
unsigned int evdo:1; /* set external vbus divider option */
};
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 053bac9d983c..96ae69502c86 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -81,12 +81,15 @@ static int ehci_ci_reset(struct usb_hcd *hcd)
{
struct device *dev = hcd->self.controller;
struct ci_hdrc *ci = dev_get_drvdata(dev);
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
int ret;
ret = ehci_setup(hcd);
if (ret)
return ret;
+ ehci->need_io_watchdog = 0;
+
ci_platform_configure(ci);
return ret;
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index b93356834bb5..661f43fe0f9e 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -59,7 +59,7 @@ ctrl_endpt_in_desc = {
*/
static inline int hw_ep_bit(int num, int dir)
{
- return num + (dir ? 16 : 0);
+ return num + ((dir == TX) ? 16 : 0);
}
static inline int ep_to_bit(struct ci_hdrc *ci, int n)
@@ -121,9 +121,8 @@ static int hw_ep_flush(struct ci_hdrc *ci, int num, int dir)
*/
static int hw_ep_disable(struct ci_hdrc *ci, int num, int dir)
{
- hw_ep_flush(ci, num, dir);
hw_write(ci, OP_ENDPTCTRL + num,
- dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0);
+ (dir == TX) ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0);
return 0;
}
@@ -139,7 +138,7 @@ static int hw_ep_enable(struct ci_hdrc *ci, int num, int dir, int type)
{
u32 mask, data;
- if (dir) {
+ if (dir == TX) {
mask = ENDPTCTRL_TXT; /* type */
data = type << __ffs(mask);
@@ -171,7 +170,7 @@ static int hw_ep_enable(struct ci_hdrc *ci, int num, int dir, int type)
*/
static int hw_ep_get_halt(struct ci_hdrc *ci, int num, int dir)
{
- u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
+ u32 mask = (dir == TX) ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
return hw_read(ci, OP_ENDPTCTRL + num, mask) ? 1 : 0;
}
@@ -188,6 +187,9 @@ static int hw_ep_prime(struct ci_hdrc *ci, int num, int dir, int is_ctrl)
{
int n = hw_ep_bit(num, dir);
+ /* Synchronize before ep prime */
+ wmb();
+
if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
return -EAGAIN;
@@ -218,8 +220,8 @@ static int hw_ep_set_halt(struct ci_hdrc *ci, int num, int dir, int value)
do {
enum ci_hw_regs reg = OP_ENDPTCTRL + num;
- u32 mask_xs = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
- u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR;
+ u32 mask_xs = (dir == TX) ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
+ u32 mask_xr = (dir == TX) ? ENDPTCTRL_TXR : ENDPTCTRL_RXR;
/* data toggle - reserved for EP0 but it's in ESS */
hw_write(ci, reg, mask_xs|mask_xr,
@@ -348,8 +350,7 @@ static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
if (node == NULL)
return -ENOMEM;
- node->ptr = dma_pool_zalloc(hwep->td_pool, GFP_ATOMIC,
- &node->dma);
+ node->ptr = dma_pool_zalloc(hwep->td_pool, GFP_ATOMIC, &node->dma);
if (node->ptr == NULL) {
kfree(node);
return -ENOMEM;
@@ -506,8 +507,6 @@ static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
hwep->qh.ptr->cap |= mul << __ffs(QH_MULT);
}
- wmb(); /* synchronize before ep prime */
-
ret = hw_ep_prime(ci, hwep->num, hwep->dir,
hwep->type == USB_ENDPOINT_XFER_CONTROL);
done:
@@ -534,9 +533,6 @@ static int reprime_dtd(struct ci_hdrc *ci, struct ci_hw_ep *hwep,
hwep->qh.ptr->td.token &=
cpu_to_le32(~(TD_STATUS_HALTED | TD_STATUS_ACTIVE));
- /* Synchronize before ep prime */
- wmb();
-
return hw_ep_prime(ci, hwep->num, hwep->dir,
hwep->type == USB_ENDPOINT_XFER_CONTROL);
}
@@ -590,7 +586,7 @@ static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
}
if (remaining_length) {
- if (hwep->dir) {
+ if (hwep->dir == TX) {
hwreq->req.status = -EPROTO;
break;
}
@@ -1051,9 +1047,9 @@ __acquires(ci->lock)
if (req.wLength != 0)
break;
num = le16_to_cpu(req.wIndex);
- dir = num & USB_ENDPOINT_DIR_MASK;
+ dir = (num & USB_ENDPOINT_DIR_MASK) ? TX : RX;
num &= USB_ENDPOINT_NUMBER_MASK;
- if (dir) /* TX */
+ if (dir == TX)
num += ci->hw_ep_max / 2;
if (!ci->ci_hw_ep[num].wedge) {
spin_unlock(&ci->lock);
@@ -1103,9 +1099,9 @@ __acquires(ci->lock)
if (req.wLength != 0)
break;
num = le16_to_cpu(req.wIndex);
- dir = num & USB_ENDPOINT_DIR_MASK;
+ dir = (num & USB_ENDPOINT_DIR_MASK) ? TX : RX;
num &= USB_ENDPOINT_NUMBER_MASK;
- if (dir) /* TX */
+ if (dir == TX)
num += ci->hw_ep_max / 2;
spin_unlock(&ci->lock);
@@ -1680,12 +1676,10 @@ static int init_eps(struct ci_hdrc *ci)
usb_ep_set_maxpacket_limit(&hwep->ep, (unsigned short)~0);
INIT_LIST_HEAD(&hwep->qh.queue);
- hwep->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL,
- &hwep->qh.dma);
+ hwep->qh.ptr = dma_pool_zalloc(ci->qh_pool, GFP_KERNEL,
+ &hwep->qh.dma);
if (hwep->qh.ptr == NULL)
retval = -ENOMEM;
- else
- memset(hwep->qh.ptr, 0, sizeof(*hwep->qh.ptr));
/*
* set up shorthands for ep0 out and in endpoints,
@@ -1999,7 +1993,7 @@ int ci_hdrc_gadget_init(struct ci_hdrc *ci)
if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC))
return -ENXIO;
- rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL);
+ rdrv = devm_kzalloc(ci->dev, sizeof(*rdrv), GFP_KERNEL);
if (!rdrv)
return -ENOMEM;
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index ab8b027e8cc8..20d02a5e418d 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -56,6 +56,7 @@
#define MX6_BM_NON_BURST_SETTING BIT(1)
#define MX6_BM_OVER_CUR_DIS BIT(7)
+#define MX6_BM_OVER_CUR_POLARITY BIT(8)
#define MX6_BM_WAKEUP_ENABLE BIT(10)
#define MX6_BM_ID_WAKEUP BIT(16)
#define MX6_BM_VBUS_WAKEUP BIT(17)
@@ -266,11 +267,14 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
spin_lock_irqsave(&usbmisc->lock, flags);
+ reg = readl(usbmisc->base + data->index * 4);
if (data->disable_oc) {
- reg = readl(usbmisc->base + data->index * 4);
- writel(reg | MX6_BM_OVER_CUR_DIS,
- usbmisc->base + data->index * 4);
+ reg |= MX6_BM_OVER_CUR_DIS;
+ } else if (data->oc_polarity == 1) {
+ /* High active */
+ reg &= ~(MX6_BM_OVER_CUR_DIS | MX6_BM_OVER_CUR_POLARITY);
}
+ writel(reg, usbmisc->base + data->index * 4);
/* SoC non-burst setting */
reg = readl(usbmisc->base + data->index * 4);
@@ -365,10 +369,14 @@ static int usbmisc_imx7d_init(struct imx_usbmisc_data *data)
return -EINVAL;
spin_lock_irqsave(&usbmisc->lock, flags);
+ reg = readl(usbmisc->base);
if (data->disable_oc) {
- reg = readl(usbmisc->base);
- writel(reg | MX6_BM_OVER_CUR_DIS, usbmisc->base);
+ reg |= MX6_BM_OVER_CUR_DIS;
+ } else if (data->oc_polarity == 1) {
+ /* High active */
+ reg &= ~(MX6_BM_OVER_CUR_DIS | MX6_BM_OVER_CUR_POLARITY);
}
+ writel(reg, usbmisc->base);
reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK;
@@ -492,6 +500,10 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = {
.compatible = "fsl,imx6ul-usbmisc",
.data = &imx6sx_usbmisc_ops,
},
+ {
+ .compatible = "fsl,imx7d-usbmisc",
+ .data = &imx7d_usbmisc_ops,
+ },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids);
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 0f3f62e81e5b..78f0f85bebdc 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -368,17 +368,17 @@ static int acm_submit_read_urb(struct acm *acm, int index, gfp_t mem_flags)
if (!test_and_clear_bit(index, &acm->read_urbs_free))
return 0;
- dev_vdbg(&acm->data->dev, "%s - urb %d\n", __func__, index);
-
res = usb_submit_urb(acm->read_urbs[index], mem_flags);
if (res) {
if (res != -EPERM) {
dev_err(&acm->data->dev,
- "%s - usb_submit_urb failed: %d\n",
- __func__, res);
+ "urb %d failed submission with %d\n",
+ index, res);
}
set_bit(index, &acm->read_urbs_free);
return res;
+ } else {
+ dev_vdbg(&acm->data->dev, "submitted urb %d\n", index);
}
return 0;
@@ -415,8 +415,9 @@ static void acm_read_bulk_callback(struct urb *urb)
unsigned long flags;
int status = urb->status;
- dev_vdbg(&acm->data->dev, "%s - urb %d, len %d\n", __func__,
- rb->index, urb->actual_length);
+ dev_vdbg(&acm->data->dev, "got urb %d, len %d, status %d\n",
+ rb->index, urb->actual_length,
+ status);
if (!acm->dev) {
set_bit(rb->index, &acm->read_urbs_free);
@@ -426,8 +427,6 @@ static void acm_read_bulk_callback(struct urb *urb)
if (status) {
set_bit(rb->index, &acm->read_urbs_free);
- dev_dbg(&acm->data->dev, "%s - non-zero urb status: %d\n",
- __func__, status);
if ((status != -ENOENT) || (urb->actual_length == 0))
return;
}
@@ -462,8 +461,7 @@ static void acm_write_bulk(struct urb *urb)
int status = urb->status;
if (status || (urb->actual_length != urb->transfer_buffer_length))
- dev_vdbg(&acm->data->dev, "%s - len %d/%d, status %d\n",
- __func__,
+ dev_vdbg(&acm->data->dev, "wrote len %d/%d, status %d\n",
urb->actual_length,
urb->transfer_buffer_length,
status);
@@ -478,8 +476,6 @@ static void acm_softint(struct work_struct *work)
{
struct acm *acm = container_of(work, struct acm, work);
- dev_vdbg(&acm->data->dev, "%s\n", __func__);
-
tty_port_tty_wakeup(&acm->port);
}
@@ -492,8 +488,6 @@ static int acm_tty_install(struct tty_driver *driver, struct tty_struct *tty)
struct acm *acm;
int retval;
- dev_dbg(tty->dev, "%s\n", __func__);
-
acm = acm_get_by_minor(tty->index);
if (!acm)
return -ENODEV;
@@ -515,8 +509,6 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
{
struct acm *acm = tty->driver_data;
- dev_dbg(tty->dev, "%s\n", __func__);
-
return tty_port_open(&acm->port, tty, filp);
}
@@ -545,8 +537,6 @@ static int acm_port_activate(struct tty_port *port, struct tty_struct *tty)
int retval = -ENODEV;
int i;
- dev_dbg(&acm->control->dev, "%s\n", __func__);
-
mutex_lock(&acm->mutex);
if (acm->disconnected)
goto disconnected;
@@ -607,8 +597,6 @@ static void acm_port_destruct(struct tty_port *port)
{
struct acm *acm = container_of(port, struct acm, port);
- dev_dbg(&acm->control->dev, "%s\n", __func__);
-
acm_release_minor(acm);
usb_put_intf(acm->control);
kfree(acm->country_codes);
@@ -622,8 +610,6 @@ static void acm_port_shutdown(struct tty_port *port)
struct acm_wb *wb;
int i;
- dev_dbg(&acm->control->dev, "%s\n", __func__);
-
/*
* Need to grab write_lock to prevent race with resume, but no need to
* hold it due to the tty-port initialised flag.
@@ -654,21 +640,21 @@ static void acm_port_shutdown(struct tty_port *port)
static void acm_tty_cleanup(struct tty_struct *tty)
{
struct acm *acm = tty->driver_data;
- dev_dbg(&acm->control->dev, "%s\n", __func__);
+
tty_port_put(&acm->port);
}
static void acm_tty_hangup(struct tty_struct *tty)
{
struct acm *acm = tty->driver_data;
- dev_dbg(&acm->control->dev, "%s\n", __func__);
+
tty_port_hangup(&acm->port);
}
static void acm_tty_close(struct tty_struct *tty, struct file *filp)
{
struct acm *acm = tty->driver_data;
- dev_dbg(&acm->control->dev, "%s\n", __func__);
+
tty_port_close(&acm->port, tty, filp);
}
@@ -684,7 +670,7 @@ static int acm_tty_write(struct tty_struct *tty,
if (!count)
return 0;
- dev_vdbg(&acm->data->dev, "%s - count %d\n", __func__, count);
+ dev_vdbg(&acm->data->dev, "%d bytes from tty layer\n", count);
spin_lock_irqsave(&acm->write_lock, flags);
wbn = acm_wb_alloc(acm);
@@ -701,7 +687,7 @@ static int acm_tty_write(struct tty_struct *tty,
}
count = (count > acm->writesize) ? acm->writesize : count;
- dev_vdbg(&acm->data->dev, "%s - write %d\n", __func__, count);
+ dev_vdbg(&acm->data->dev, "writing %d bytes\n", count);
memcpy(wb->buf, buf, count);
wb->len = count;
@@ -1193,6 +1179,9 @@ static int acm_probe(struct usb_interface *intf,
return -EINVAL;
}
+ if (!intf->cur_altsetting)
+ return -EINVAL;
+
if (!buflen) {
if (intf->cur_altsetting->endpoint &&
intf->cur_altsetting->endpoint->extralen &&
@@ -1246,6 +1235,8 @@ static int acm_probe(struct usb_interface *intf,
dev_dbg(&intf->dev, "no interfaces\n");
return -ENODEV;
}
+ if (!data_interface->cur_altsetting || !control_interface->cur_altsetting)
+ return -ENODEV;
if (data_intf_num != call_intf_num)
dev_dbg(&intf->dev, "Separate call control interface. That is not fully supported.\n");
@@ -1533,8 +1524,6 @@ static void stop_data_traffic(struct acm *acm)
{
int i;
- dev_dbg(&acm->control->dev, "%s\n", __func__);
-
usb_kill_urb(acm->ctrlurb);
for (i = 0; i < ACM_NW; i++)
usb_kill_urb(acm->wb[i].urb);
@@ -1551,8 +1540,6 @@ static void acm_disconnect(struct usb_interface *intf)
struct tty_struct *tty;
int i;
- dev_dbg(&intf->dev, "%s\n", __func__);
-
/* sibling interface is already cleaning up */
if (!acm)
return;
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 337948c42110..0a6369510f2d 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -58,6 +58,7 @@ MODULE_DEVICE_TABLE (usb, wdm_ids);
#define WDM_SUSPENDING 8
#define WDM_RESETTING 9
#define WDM_OVERFLOW 10
+#define WDM_DRAIN_ON_OPEN 11
#define WDM_MAX 16
@@ -154,6 +155,9 @@ static void wdm_out_callback(struct urb *urb)
wake_up(&desc->wait);
}
+/* forward declaration */
+static int service_outstanding_interrupt(struct wdm_device *desc);
+
static void wdm_in_callback(struct urb *urb)
{
struct wdm_device *desc = urb->context;
@@ -167,18 +171,18 @@ static void wdm_in_callback(struct urb *urb)
switch (status) {
case -ENOENT:
dev_dbg(&desc->intf->dev,
- "nonzero urb status received: -ENOENT");
+ "nonzero urb status received: -ENOENT\n");
goto skip_error;
case -ECONNRESET:
dev_dbg(&desc->intf->dev,
- "nonzero urb status received: -ECONNRESET");
+ "nonzero urb status received: -ECONNRESET\n");
goto skip_error;
case -ESHUTDOWN:
dev_dbg(&desc->intf->dev,
- "nonzero urb status received: -ESHUTDOWN");
+ "nonzero urb status received: -ESHUTDOWN\n");
goto skip_error;
case -EPIPE:
- dev_err(&desc->intf->dev,
+ dev_dbg(&desc->intf->dev,
"nonzero urb status received: -EPIPE\n");
break;
default:
@@ -188,7 +192,13 @@ static void wdm_in_callback(struct urb *urb)
}
}
- desc->rerr = status;
+ /*
+ * only set a new error if there is no previous error.
+ * Errors are only cleared during read/open
+ */
+ if (desc->rerr == 0)
+ desc->rerr = status;
+
if (length + desc->length > desc->wMaxCommand) {
/* The buffer would overflow */
set_bit(WDM_OVERFLOW, &desc->flags);
@@ -200,10 +210,40 @@ static void wdm_in_callback(struct urb *urb)
desc->reslength = length;
}
}
+
+ /*
+ * Handling devices with the WDM_DRAIN_ON_OPEN flag set:
+ * If desc->resp_count is unset, then the urb was submitted
+ * without a prior notification. If the device returned any
+ * data, then this implies that it had messages queued without
+ * notifying us. Continue reading until that queue is flushed.
+ */
+ if (!desc->resp_count) {
+ if (!length) {
+ /* do not propagate the expected -EPIPE */
+ desc->rerr = 0;
+ goto unlock;
+ }
+ dev_dbg(&desc->intf->dev, "got %d bytes without notification\n", length);
+ set_bit(WDM_RESPONDING, &desc->flags);
+ usb_submit_urb(desc->response, GFP_ATOMIC);
+ }
+
skip_error:
+ set_bit(WDM_READ, &desc->flags);
wake_up(&desc->wait);
- set_bit(WDM_READ, &desc->flags);
+ if (desc->rerr) {
+ /*
+ * Since there was an error, userspace may decide to not read
+ * any data after poll'ing.
+ * We should respond to further attempts from the device to send
+ * data, so that we can get unstuck.
+ */
+ service_outstanding_interrupt(desc);
+ }
+
+unlock:
spin_unlock(&desc->iuspin);
}
@@ -244,18 +284,18 @@ static void wdm_int_callback(struct urb *urb)
switch (dr->bNotificationType) {
case USB_CDC_NOTIFY_RESPONSE_AVAILABLE:
dev_dbg(&desc->intf->dev,
- "NOTIFY_RESPONSE_AVAILABLE received: index %d len %d",
+ "NOTIFY_RESPONSE_AVAILABLE received: index %d len %d\n",
le16_to_cpu(dr->wIndex), le16_to_cpu(dr->wLength));
break;
case USB_CDC_NOTIFY_NETWORK_CONNECTION:
dev_dbg(&desc->intf->dev,
- "NOTIFY_NETWORK_CONNECTION %s network",
+ "NOTIFY_NETWORK_CONNECTION %s network\n",
dr->wValue ? "connected to" : "disconnected from");
goto exit;
case USB_CDC_NOTIFY_SPEED_CHANGE:
- dev_dbg(&desc->intf->dev, "SPEED_CHANGE received (len %u)",
+ dev_dbg(&desc->intf->dev, "SPEED_CHANGE received (len %u)\n",
urb->actual_length);
goto exit;
default:
@@ -274,8 +314,7 @@ static void wdm_int_callback(struct urb *urb)
&& !test_bit(WDM_DISCONNECTING, &desc->flags)
&& !test_bit(WDM_SUSPENDING, &desc->flags)) {
rv = usb_submit_urb(desc->response, GFP_ATOMIC);
- dev_dbg(&desc->intf->dev, "%s: usb_submit_urb %d",
- __func__, rv);
+ dev_dbg(&desc->intf->dev, "submit response URB %d\n", rv);
}
spin_unlock(&desc->iuspin);
if (rv < 0) {
@@ -417,7 +456,7 @@ static ssize_t wdm_write
rv = usb_translate_errors(rv);
goto out_free_mem_pm;
} else {
- dev_dbg(&desc->intf->dev, "Tx URB has been submitted index=%d",
+ dev_dbg(&desc->intf->dev, "Tx URB has been submitted index=%d\n",
le16_to_cpu(req->wIndex));
}
@@ -436,17 +475,14 @@ out_free_mem:
}
/*
- * clear WDM_READ flag and possibly submit the read urb if resp_count
- * is non-zero.
+ * Submit the read urb if resp_count is non-zero.
*
* Called with desc->iuspin locked
*/
-static int clear_wdm_read_flag(struct wdm_device *desc)
+static int service_outstanding_interrupt(struct wdm_device *desc)
{
int rv = 0;
- clear_bit(WDM_READ, &desc->flags);
-
/* submit read urb only if the device is waiting for it */
if (!desc->resp_count || !--desc->resp_count)
goto out;
@@ -537,8 +573,9 @@ retry:
}
if (!desc->reslength) { /* zero length read */
- dev_dbg(&desc->intf->dev, "%s: zero length - clearing WDM_READ\n", __func__);
- rv = clear_wdm_read_flag(desc);
+ dev_dbg(&desc->intf->dev, "zero length - clearing WDM_READ\n");
+ clear_bit(WDM_READ, &desc->flags);
+ rv = service_outstanding_interrupt(desc);
spin_unlock_irq(&desc->iuspin);
if (rv < 0)
goto err;
@@ -563,8 +600,10 @@ retry:
desc->length -= cntr;
/* in case we had outstanding data */
- if (!desc->length)
- clear_wdm_read_flag(desc);
+ if (!desc->length) {
+ clear_bit(WDM_READ, &desc->flags);
+ service_outstanding_interrupt(desc);
+ }
spin_unlock_irq(&desc->iuspin);
rv = cntr;
@@ -647,6 +686,17 @@ static int wdm_open(struct inode *inode, struct file *file)
dev_err(&desc->intf->dev,
"Error submitting int urb - %d\n", rv);
rv = usb_translate_errors(rv);
+ } else if (test_bit(WDM_DRAIN_ON_OPEN, &desc->flags)) {
+ /*
+ * Some devices keep pending messages queued
+ * without resending notifications. We must
+ * flush the message queue before we can
+ * assume a one-to-one relationship between
+ * notifications and messages in the queue
+ */
+ dev_dbg(&desc->intf->dev, "draining queued data\n");
+ set_bit(WDM_RESPONDING, &desc->flags);
+ rv = usb_submit_urb(desc->response, GFP_KERNEL);
}
} else {
rv = 0;
@@ -673,7 +723,7 @@ static int wdm_release(struct inode *inode, struct file *file)
if (!desc->count) {
if (!test_bit(WDM_DISCONNECTING, &desc->flags)) {
- dev_dbg(&desc->intf->dev, "wdm_release: cleanup");
+ dev_dbg(&desc->intf->dev, "wdm_release: cleanup\n");
kill_urbs(desc);
spin_lock_irq(&desc->iuspin);
desc->resp_count = 0;
@@ -753,7 +803,8 @@ static void wdm_rxwork(struct work_struct *work)
/* --- hotplug --- */
static int wdm_create(struct usb_interface *intf, struct usb_endpoint_descriptor *ep,
- u16 bufsize, int (*manage_power)(struct usb_interface *, int))
+ u16 bufsize, int (*manage_power)(struct usb_interface *, int),
+ bool drain_on_open)
{
int rv = -ENOMEM;
struct wdm_device *desc;
@@ -840,6 +891,68 @@ static int wdm_create(struct usb_interface *intf, struct usb_endpoint_descriptor
desc->manage_power = manage_power;
+ /*
+ * "drain_on_open" enables a hack to work around a firmware
+ * issue observed on network functions, in particular MBIM
+ * functions.
+ *
+ * Quoting section 7 of the CDC-WMC r1.1 specification:
+ *
+ * "The firmware shall interpret GetEncapsulatedResponse as a
+ * request to read response bytes. The firmware shall send
+ * the next wLength bytes from the response. The firmware
+ * shall allow the host to retrieve data using any number of
+ * GetEncapsulatedResponse requests. The firmware shall
+ * return a zero- length reply if there are no data bytes
+ * available.
+ *
+ * The firmware shall send ResponseAvailable notifications
+ * periodically, using any appropriate algorithm, to inform
+ * the host that there is data available in the reply
+ * buffer. The firmware is allowed to send ResponseAvailable
+ * notifications even if there is no data available, but
+ * this will obviously reduce overall performance."
+ *
+ * These requirements, although they make equally sense, are
+ * often not implemented by network functions. Some firmwares
+ * will queue data indefinitely, without ever resending a
+ * notification. The result is that the driver and firmware
+ * loses "syncronization" if the driver ever fails to respond
+ * to a single notification, something which easily can happen
+ * on release(). When this happens, the driver will appear to
+ * never receive notifications for the most current data. Each
+ * notification will only cause a single read, which returns
+ * the oldest data in the firmware's queue.
+ *
+ * The "drain_on_open" hack resolves the situation by draining
+ * data from the firmware until none is returned, without a
+ * prior notification.
+ *
+ * This will inevitably race with the firmware, risking that
+ * we read data from the device before handling the associated
+ * notification. To make things worse, some of the devices
+ * needing the hack do not implement the "return zero if no
+ * data is available" requirement either. Instead they return
+ * an error on the subsequent read in this case. This means
+ * that "winning" the race can cause an unexpected EIO to
+ * userspace.
+ *
+ * "winning" the race is more likely on resume() than on
+ * open(), and the unexpected error is more harmful in the
+ * middle of an open session. The hack is therefore only
+ * applied on open(), and not on resume() where it logically
+ * would be equally necessary. So we define open() as the only
+ * driver <-> device "syncronization point". Should we happen
+ * to lose a notification after open(), then syncronization
+ * will be lost until release()
+ *
+ * The hack should not be enabled for CDC WDM devices
+ * conforming to the CDC-WMC r1.1 specification. This is
+ * ensured by setting drain_on_open to false in wdm_probe().
+ */
+ if (drain_on_open)
+ set_bit(WDM_DRAIN_ON_OPEN, &desc->flags);
+
spin_lock(&wdm_device_list_lock);
list_add(&desc->device_list, &wdm_device_list);
spin_unlock(&wdm_device_list_lock);
@@ -893,7 +1006,7 @@ static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id)
goto err;
ep = &iface->endpoint[0].desc;
- rv = wdm_create(intf, ep, maxcom, &wdm_manage_power);
+ rv = wdm_create(intf, ep, maxcom, &wdm_manage_power, false);
err:
return rv;
@@ -925,7 +1038,7 @@ struct usb_driver *usb_cdc_wdm_register(struct usb_interface *intf,
{
int rv = -EINVAL;
- rv = wdm_create(intf, ep, bufsize, manage_power);
+ rv = wdm_create(intf, ep, bufsize, manage_power, true);
if (rv < 0)
goto err;
@@ -967,7 +1080,7 @@ static void wdm_disconnect(struct usb_interface *intf)
if (!desc->count)
cleanup(desc);
else
- dev_dbg(&intf->dev, "%s: %d open files - postponing cleanup\n", __func__, desc->count);
+ dev_dbg(&intf->dev, "%d open files - postponing cleanup\n", desc->count);
mutex_unlock(&wdm_mutex);
}
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 917a55c4480d..a6c1fae7d52a 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -141,6 +141,7 @@ static void usbtmc_delete(struct kref *kref)
struct usbtmc_device_data *data = to_usbtmc_data(kref);
usb_put_dev(data->usb_dev);
+ kfree(data);
}
static int usbtmc_open(struct inode *inode, struct file *filp)
@@ -1379,7 +1380,7 @@ static int usbtmc_probe(struct usb_interface *intf,
dev_dbg(&intf->dev, "%s called\n", __func__);
- data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL);
+ data = kmalloc(sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
@@ -1467,10 +1468,8 @@ static int usbtmc_probe(struct usb_interface *intf,
if (data->iin_ep_present) {
/* allocate int urb */
data->iin_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!data->iin_urb) {
- dev_err(&intf->dev, "Failed to allocate int urb\n");
+ if (!data->iin_urb)
goto error_register;
- }
/* will reference data in int urb */
kref_get(&data->kref);
@@ -1478,10 +1477,8 @@ static int usbtmc_probe(struct usb_interface *intf,
/* allocate buffer for interrupt in */
data->iin_buffer = kmalloc(data->iin_wMaxPacketSize,
GFP_KERNEL);
- if (!data->iin_buffer) {
- dev_err(&intf->dev, "Failed to allocate int buf\n");
+ if (!data->iin_buffer)
goto error_register;
- }
/* fill interrupt urb */
usb_fill_int_urb(data->iin_urb, data->usb_dev,
diff --git a/drivers/usb/common/ulpi.c b/drivers/usb/common/ulpi.c
index 01c0c0477a9e..8b317702d761 100644
--- a/drivers/usb/common/ulpi.c
+++ b/drivers/usb/common/ulpi.c
@@ -21,13 +21,13 @@
int ulpi_read(struct ulpi *ulpi, u8 addr)
{
- return ulpi->ops->read(ulpi->ops, addr);
+ return ulpi->ops->read(ulpi->dev.parent, addr);
}
EXPORT_SYMBOL_GPL(ulpi_read);
int ulpi_write(struct ulpi *ulpi, u8 addr, u8 val)
{
- return ulpi->ops->write(ulpi->ops, addr, val);
+ return ulpi->ops->write(ulpi->dev.parent, addr, val);
}
EXPORT_SYMBOL_GPL(ulpi_write);
@@ -127,16 +127,17 @@ static struct device_type ulpi_dev_type = {
*
* Registers a driver with the ULPI bus.
*/
-int ulpi_register_driver(struct ulpi_driver *drv)
+int __ulpi_register_driver(struct ulpi_driver *drv, struct module *module)
{
if (!drv->probe)
return -EINVAL;
+ drv->driver.owner = module;
drv->driver.bus = &ulpi_bus;
return driver_register(&drv->driver);
}
-EXPORT_SYMBOL_GPL(ulpi_register_driver);
+EXPORT_SYMBOL_GPL(__ulpi_register_driver);
/**
* ulpi_unregister_driver - unregister a driver with the ULPI bus
@@ -156,6 +157,8 @@ static int ulpi_register(struct device *dev, struct ulpi *ulpi)
{
int ret;
+ ulpi->dev.parent = dev; /* needed early for ops */
+
/* Test the interface */
ret = ulpi_write(ulpi, ULPI_SCRATCH, 0xaa);
if (ret < 0)
@@ -174,7 +177,6 @@ static int ulpi_register(struct device *dev, struct ulpi *ulpi)
ulpi->id.product = ulpi_read(ulpi, ULPI_PRODUCT_ID_LOW);
ulpi->id.product |= ulpi_read(ulpi, ULPI_PRODUCT_ID_HIGH) << 8;
- ulpi->dev.parent = dev;
ulpi->dev.bus = &ulpi_bus;
ulpi->dev.type = &ulpi_dev_type;
dev_set_name(&ulpi->dev, "%s.ulpi", dev_name(dev));
@@ -201,7 +203,8 @@ static int ulpi_register(struct device *dev, struct ulpi *ulpi)
* Allocates and registers a ULPI device and an interface for it. Called from
* the USB controller that provides the ULPI interface.
*/
-struct ulpi *ulpi_register_interface(struct device *dev, struct ulpi_ops *ops)
+struct ulpi *ulpi_register_interface(struct device *dev,
+ const struct ulpi_ops *ops)
{
struct ulpi *ulpi;
int ret;
@@ -211,7 +214,6 @@ struct ulpi *ulpi_register_interface(struct device *dev, struct ulpi_ops *ops)
return ERR_PTR(-ENOMEM);
ulpi->ops = ops;
- ops->dev = dev;
ret = ulpi_register(dev, ulpi);
if (ret) {
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index dd280108758f..0e5a889742b3 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -83,23 +83,10 @@ config USB_OTG_FSM
Implements OTG Finite State Machine as specified in On-The-Go
and Embedded Host Supplement to the USB Revision 2.0 Specification.
-config USB_ULPI_BUS
- tristate "USB ULPI PHY interface support"
- depends on USB_SUPPORT
+config USB_LEDS_TRIGGER_USBPORT
+ tristate "USB port LED trigger"
+ depends on USB && LEDS_TRIGGERS
help
- UTMI+ Low Pin Interface (ULPI) is specification for a commonly used
- USB 2.0 PHY interface. The ULPI specification defines a standard set
- of registers that can be used to detect the vendor and product which
- allows ULPI to be handled as a bus. This module is the driver for that
- bus.
-
- The ULPI interfaces (the buses) are registered by the drivers for USB
- controllers which support ULPI register access and have ULPI PHY
- attached to them. The ULPI PHY drivers themselves are normal PHY
- drivers.
-
- ULPI PHYs provide often functions such as ADP sensing/probing (OTG
- protocol) and USB charger detection.
-
- To compile this driver as a module, choose M here: the module will
- be called ulpi.
+ This driver allows LEDs to be controlled by USB events. Enabling this
+ trigger allows specifying list of USB ports that should turn on LED
+ when some USB device gets connected.
diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile
index 9780877010b4..b99b871c4b9d 100644
--- a/drivers/usb/core/Makefile
+++ b/drivers/usb/core/Makefile
@@ -5,9 +5,12 @@
usbcore-y := usb.o hub.o hcd.o urb.o message.o driver.o
usbcore-y += config.o file.o buffer.o sysfs.o endpoint.o
usbcore-y += devio.o notify.o generic.o quirks.o devices.o
-usbcore-y += port.o of.o
+usbcore-y += port.o
+usbcore-$(CONFIG_OF) += of.o
usbcore-$(CONFIG_PCI) += hcd-pci.o
usbcore-$(CONFIG_ACPI) += usb-acpi.o
obj-$(CONFIG_USB) += usbcore.o
+
+obj-$(CONFIG_USB_LEDS_TRIGGER_USBPORT) += ledtrig-usbport.o
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index d2e3f655c26f..479e223f9cff 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -46,6 +46,7 @@
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <linux/usb/phy.h>
+#include <linux/usb/otg.h>
#include "usb.h"
@@ -2517,10 +2518,8 @@ struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
struct usb_hcd *hcd;
hcd = kzalloc(sizeof(*hcd) + driver->hcd_priv_size, GFP_KERNEL);
- if (!hcd) {
- dev_dbg (dev, "hcd alloc failed\n");
+ if (!hcd)
return NULL;
- }
if (primary_hcd == NULL) {
hcd->address0_mutex = kmalloc(sizeof(*hcd->address0_mutex),
GFP_KERNEL);
@@ -3033,7 +3032,7 @@ EXPORT_SYMBOL_GPL(usb_hcd_platform_shutdown);
/*-------------------------------------------------------------------------*/
-#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
+#if IS_ENABLED(CONFIG_USB_MON)
const struct usb_mon_operations *mon_ops;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 1d5fc32d06d0..cbb146736f57 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1823,10 +1823,8 @@ descriptor_error:
dev_info(&intf->dev, "USB hub found\n");
hub = kzalloc(sizeof(*hub), GFP_KERNEL);
- if (!hub) {
- dev_dbg(&intf->dev, "couldn't kmalloc hub struct\n");
+ if (!hub)
return -ENOMEM;
- }
kref_init(&hub->kref);
hub->intfdev = &intf->dev;
@@ -3106,7 +3104,7 @@ static int usb_disable_remote_wakeup(struct usb_device *udev)
USB_CTRL_SET_TIMEOUT);
else
return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- USB_REQ_CLEAR_FEATURE, USB_RECIP_INTERFACE,
+ USB_REQ_SET_FEATURE, USB_RECIP_INTERFACE,
USB_INTRF_FUNC_SUSPEND, 0, NULL, 0,
USB_CTRL_SET_TIMEOUT);
}
@@ -5337,11 +5335,10 @@ static int descriptors_changed(struct usb_device *udev,
}
buf = kmalloc(len, GFP_NOIO);
- if (buf == NULL) {
- dev_err(&udev->dev, "no mem to re-read configs after reset\n");
+ if (!buf)
/* assume the worst */
return 1;
- }
+
for (index = 0; index < udev->descriptor.bNumConfigurations; index++) {
old_length = le16_to_cpu(udev->config[index].desc.wTotalLength);
length = usb_get_descriptor(udev, USB_DT_CONFIG, index, buf,
diff --git a/drivers/usb/core/ledtrig-usbport.c b/drivers/usb/core/ledtrig-usbport.c
new file mode 100644
index 000000000000..3ed5162677ad
--- /dev/null
+++ b/drivers/usb/core/ledtrig-usbport.c
@@ -0,0 +1,314 @@
+/*
+ * USB port LED trigger
+ *
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/device.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+struct usbport_trig_data {
+ struct led_classdev *led_cdev;
+ struct list_head ports;
+ struct notifier_block nb;
+ int count; /* Amount of connected matching devices */
+};
+
+struct usbport_trig_port {
+ struct usbport_trig_data *data;
+ struct usb_device *hub;
+ int portnum;
+ char *port_name;
+ bool observed;
+ struct device_attribute attr;
+ struct list_head list;
+};
+
+/***************************************
+ * Helpers
+ ***************************************/
+
+/**
+ * usbport_trig_usb_dev_observed - Check if dev is connected to observed port
+ */
+static bool usbport_trig_usb_dev_observed(struct usbport_trig_data *usbport_data,
+ struct usb_device *usb_dev)
+{
+ struct usbport_trig_port *port;
+
+ if (!usb_dev->parent)
+ return false;
+
+ list_for_each_entry(port, &usbport_data->ports, list) {
+ if (usb_dev->parent == port->hub &&
+ usb_dev->portnum == port->portnum)
+ return port->observed;
+ }
+
+ return false;
+}
+
+static int usbport_trig_usb_dev_check(struct usb_device *usb_dev, void *data)
+{
+ struct usbport_trig_data *usbport_data = data;
+
+ if (usbport_trig_usb_dev_observed(usbport_data, usb_dev))
+ usbport_data->count++;
+
+ return 0;
+}
+
+/**
+ * usbport_trig_update_count - Recalculate amount of connected matching devices
+ */
+static void usbport_trig_update_count(struct usbport_trig_data *usbport_data)
+{
+ struct led_classdev *led_cdev = usbport_data->led_cdev;
+
+ usbport_data->count = 0;
+ usb_for_each_dev(usbport_data, usbport_trig_usb_dev_check);
+ led_cdev->brightness_set(led_cdev,
+ usbport_data->count ? LED_FULL : LED_OFF);
+}
+
+/***************************************
+ * Device attr
+ ***************************************/
+
+static ssize_t usbport_trig_port_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct usbport_trig_port *port = container_of(attr,
+ struct usbport_trig_port,
+ attr);
+
+ return sprintf(buf, "%d\n", port->observed) + 1;
+}
+
+static ssize_t usbport_trig_port_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct usbport_trig_port *port = container_of(attr,
+ struct usbport_trig_port,
+ attr);
+
+ if (!strcmp(buf, "0") || !strcmp(buf, "0\n"))
+ port->observed = 0;
+ else if (!strcmp(buf, "1") || !strcmp(buf, "1\n"))
+ port->observed = 1;
+ else
+ return -EINVAL;
+
+ usbport_trig_update_count(port->data);
+
+ return size;
+}
+
+static struct attribute *ports_attrs[] = {
+ NULL,
+};
+static const struct attribute_group ports_group = {
+ .name = "ports",
+ .attrs = ports_attrs,
+};
+
+/***************************************
+ * Adding & removing ports
+ ***************************************/
+
+static int usbport_trig_add_port(struct usbport_trig_data *usbport_data,
+ struct usb_device *usb_dev,
+ const char *hub_name, int portnum)
+{
+ struct led_classdev *led_cdev = usbport_data->led_cdev;
+ struct usbport_trig_port *port;
+ size_t len;
+ int err;
+
+ port = kzalloc(sizeof(*port), GFP_KERNEL);
+ if (!port) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ port->data = usbport_data;
+ port->hub = usb_dev;
+ port->portnum = portnum;
+
+ len = strlen(hub_name) + 8;
+ port->port_name = kzalloc(len, GFP_KERNEL);
+ if (!port->port_name) {
+ err = -ENOMEM;
+ goto err_free_port;
+ }
+ snprintf(port->port_name, len, "%s-port%d", hub_name, portnum);
+
+ port->attr.attr.name = port->port_name;
+ port->attr.attr.mode = S_IRUSR | S_IWUSR;
+ port->attr.show = usbport_trig_port_show;
+ port->attr.store = usbport_trig_port_store;
+
+ err = sysfs_add_file_to_group(&led_cdev->dev->kobj, &port->attr.attr,
+ ports_group.name);
+ if (err)
+ goto err_free_port_name;
+
+ list_add_tail(&port->list, &usbport_data->ports);
+
+ return 0;
+
+err_free_port_name:
+ kfree(port->port_name);
+err_free_port:
+ kfree(port);
+err_out:
+ return err;
+}
+
+static int usbport_trig_add_usb_dev_ports(struct usb_device *usb_dev,
+ void *data)
+{
+ struct usbport_trig_data *usbport_data = data;
+ int i;
+
+ for (i = 1; i <= usb_dev->maxchild; i++)
+ usbport_trig_add_port(usbport_data, usb_dev,
+ dev_name(&usb_dev->dev), i);
+
+ return 0;
+}
+
+static void usbport_trig_remove_port(struct usbport_trig_data *usbport_data,
+ struct usbport_trig_port *port)
+{
+ struct led_classdev *led_cdev = usbport_data->led_cdev;
+
+ list_del(&port->list);
+ sysfs_remove_file_from_group(&led_cdev->dev->kobj, &port->attr.attr,
+ ports_group.name);
+ kfree(port->port_name);
+ kfree(port);
+}
+
+static void usbport_trig_remove_usb_dev_ports(struct usbport_trig_data *usbport_data,
+ struct usb_device *usb_dev)
+{
+ struct usbport_trig_port *port, *tmp;
+
+ list_for_each_entry_safe(port, tmp, &usbport_data->ports, list) {
+ if (port->hub == usb_dev)
+ usbport_trig_remove_port(usbport_data, port);
+ }
+}
+
+/***************************************
+ * Init, exit, etc.
+ ***************************************/
+
+static int usbport_trig_notify(struct notifier_block *nb, unsigned long action,
+ void *data)
+{
+ struct usbport_trig_data *usbport_data =
+ container_of(nb, struct usbport_trig_data, nb);
+ struct led_classdev *led_cdev = usbport_data->led_cdev;
+ struct usb_device *usb_dev = data;
+ bool observed;
+
+ observed = usbport_trig_usb_dev_observed(usbport_data, usb_dev);
+
+ switch (action) {
+ case USB_DEVICE_ADD:
+ usbport_trig_add_usb_dev_ports(usb_dev, usbport_data);
+ if (observed && usbport_data->count++ == 0)
+ led_cdev->brightness_set(led_cdev, LED_FULL);
+ return NOTIFY_OK;
+ case USB_DEVICE_REMOVE:
+ usbport_trig_remove_usb_dev_ports(usbport_data, usb_dev);
+ if (observed && --usbport_data->count == 0)
+ led_cdev->brightness_set(led_cdev, LED_OFF);
+ return NOTIFY_OK;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static void usbport_trig_activate(struct led_classdev *led_cdev)
+{
+ struct usbport_trig_data *usbport_data;
+ int err;
+
+ usbport_data = kzalloc(sizeof(*usbport_data), GFP_KERNEL);
+ if (!usbport_data)
+ return;
+ usbport_data->led_cdev = led_cdev;
+
+ /* List of ports */
+ INIT_LIST_HEAD(&usbport_data->ports);
+ err = sysfs_create_group(&led_cdev->dev->kobj, &ports_group);
+ if (err)
+ goto err_free;
+ usb_for_each_dev(usbport_data, usbport_trig_add_usb_dev_ports);
+
+ /* Notifications */
+ usbport_data->nb.notifier_call = usbport_trig_notify,
+ led_cdev->trigger_data = usbport_data;
+ usb_register_notify(&usbport_data->nb);
+
+ led_cdev->activated = true;
+ return;
+
+err_free:
+ kfree(usbport_data);
+}
+
+static void usbport_trig_deactivate(struct led_classdev *led_cdev)
+{
+ struct usbport_trig_data *usbport_data = led_cdev->trigger_data;
+ struct usbport_trig_port *port, *tmp;
+
+ if (!led_cdev->activated)
+ return;
+
+ list_for_each_entry_safe(port, tmp, &usbport_data->ports, list) {
+ usbport_trig_remove_port(usbport_data, port);
+ }
+
+ usb_unregister_notify(&usbport_data->nb);
+
+ sysfs_remove_group(&led_cdev->dev->kobj, &ports_group);
+
+ kfree(usbport_data);
+
+ led_cdev->activated = false;
+}
+
+static struct led_trigger usbport_led_trigger = {
+ .name = "usbport",
+ .activate = usbport_trig_activate,
+ .deactivate = usbport_trig_deactivate,
+};
+
+static int __init usbport_trig_init(void)
+{
+ return led_trigger_register(&usbport_led_trigger);
+}
+
+static void __exit usbport_trig_exit(void)
+{
+ led_trigger_unregister(&usbport_led_trigger);
+}
+
+module_init(usbport_trig_init);
+module_exit(usbport_trig_exit);
+
+MODULE_AUTHOR("Rafał Miłecki <rafal@milecki.pl>");
+MODULE_DESCRIPTION("USB port trigger");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 0406a59f0551..3a4707746157 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1760,17 +1760,14 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
nintf = cp->desc.bNumInterfaces;
new_interfaces = kmalloc(nintf * sizeof(*new_interfaces),
GFP_NOIO);
- if (!new_interfaces) {
- dev_err(&dev->dev, "Out of memory\n");
+ if (!new_interfaces)
return -ENOMEM;
- }
for (; n < nintf; ++n) {
new_interfaces[n] = kzalloc(
sizeof(struct usb_interface),
GFP_NOIO);
if (!new_interfaces[n]) {
- dev_err(&dev->dev, "Out of memory\n");
ret = -ENOMEM;
free_interfaces:
while (--n >= 0)
@@ -1862,7 +1859,12 @@ free_interfaces:
intf->dev.bus = &usb_bus_type;
intf->dev.type = &usb_if_device_type;
intf->dev.groups = usb_interface_groups;
+ /*
+ * Please refer to usb_alloc_dev() to see why we set
+ * dma_mask and dma_pfn_offset.
+ */
intf->dev.dma_mask = dev->dev.dma_mask;
+ intf->dev.dma_pfn_offset = dev->dev.dma_pfn_offset;
INIT_WORK(&intf->reset_ws, __usb_queue_reset_device);
intf->minor = -1;
device_initialize(&intf->dev);
diff --git a/drivers/usb/core/of.c b/drivers/usb/core/of.c
index 2289700c31d6..3de4f8873984 100644
--- a/drivers/usb/core/of.c
+++ b/drivers/usb/core/of.c
@@ -18,6 +18,7 @@
*/
#include <linux/of.h>
+#include <linux/usb/of.h>
/**
* usb_of_get_child_node - Find the device node match port number
diff --git a/drivers/usb/core/otg_whitelist.h b/drivers/usb/core/otg_whitelist.h
index a95b0c989c21..085049d37d7a 100644
--- a/drivers/usb/core/otg_whitelist.h
+++ b/drivers/usb/core/otg_whitelist.h
@@ -38,7 +38,7 @@ static struct usb_device_id whitelist_table[] = {
{ USB_DEVICE(0x0525, 0xa4a2), },
#endif
-#if defined(CONFIG_USB_TEST) || defined(CONFIG_USB_TEST_MODULE)
+#if IS_ENABLED(CONFIG_USB_TEST)
/* gadget zero, for testing */
{ USB_DEVICE(0x0525, 0xa4a0), },
#endif
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index c601e25b609f..a9039696476e 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -68,10 +68,8 @@ struct urb *usb_alloc_urb(int iso_packets, gfp_t mem_flags)
urb = kmalloc(sizeof(struct urb) +
iso_packets * sizeof(struct usb_iso_packet_descriptor),
mem_flags);
- if (!urb) {
- printk(KERN_ERR "alloc_urb: kmalloc failed\n");
+ if (!urb)
return NULL;
- }
usb_init_urb(urb);
return urb;
}
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 5e80697ef952..592151461017 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -440,7 +440,18 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
dev->dev.bus = &usb_bus_type;
dev->dev.type = &usb_device_type;
dev->dev.groups = usb_device_groups;
+ /*
+ * Fake a dma_mask/offset for the USB device:
+ * We cannot really use the dma-mapping API (dma_alloc_* and
+ * dma_map_*) for USB devices but instead need to use
+ * usb_alloc_coherent and pass data in 'urb's, but some subsystems
+ * manually look into the mask/offset pair to determine whether
+ * they need bounce buffers.
+ * Note: calling dma_set_mask() on a USB device would set the
+ * mask for the entire HCD, so don't do that.
+ */
dev->dev.dma_mask = bus->controller->dma_mask;
+ dev->dev.dma_pfn_offset = bus->controller->dma_pfn_offset;
set_dev_node(&dev->dev, dev_to_node(bus->controller));
dev->state = USB_STATE_ATTACHED;
dev->lpm_disable_count = 1;
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index 4135a5ff67ca..fa9b26b91507 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -238,6 +238,77 @@ int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg)
return ret;
}
+/**
+ * dwc2_wait_for_mode() - Waits for the controller mode.
+ * @hsotg: Programming view of the DWC_otg controller.
+ * @host_mode: If true, waits for host mode, otherwise device mode.
+ */
+static void dwc2_wait_for_mode(struct dwc2_hsotg *hsotg,
+ bool host_mode)
+{
+ ktime_t start;
+ ktime_t end;
+ unsigned int timeout = 110;
+
+ dev_vdbg(hsotg->dev, "Waiting for %s mode\n",
+ host_mode ? "host" : "device");
+
+ start = ktime_get();
+
+ while (1) {
+ s64 ms;
+
+ if (dwc2_is_host_mode(hsotg) == host_mode) {
+ dev_vdbg(hsotg->dev, "%s mode set\n",
+ host_mode ? "Host" : "Device");
+ break;
+ }
+
+ end = ktime_get();
+ ms = ktime_to_ms(ktime_sub(end, start));
+
+ if (ms >= (s64)timeout) {
+ dev_warn(hsotg->dev, "%s: Couldn't set %s mode\n",
+ __func__, host_mode ? "host" : "device");
+ break;
+ }
+
+ usleep_range(1000, 2000);
+ }
+}
+
+/**
+ * dwc2_iddig_filter_enabled() - Returns true if the IDDIG debounce
+ * filter is enabled.
+ */
+static bool dwc2_iddig_filter_enabled(struct dwc2_hsotg *hsotg)
+{
+ u32 gsnpsid;
+ u32 ghwcfg4;
+
+ if (!dwc2_hw_is_otg(hsotg))
+ return false;
+
+ /* Check if core configuration includes the IDDIG filter. */
+ ghwcfg4 = dwc2_readl(hsotg->regs + GHWCFG4);
+ if (!(ghwcfg4 & GHWCFG4_IDDIG_FILT_EN))
+ return false;
+
+ /*
+ * Check if the IDDIG debounce filter is bypassed. Available
+ * in core version >= 3.10a.
+ */
+ gsnpsid = dwc2_readl(hsotg->regs + GSNPSID);
+ if (gsnpsid >= DWC2_CORE_REV_3_10a) {
+ u32 gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
+
+ if (gotgctl & GOTGCTL_DBNCE_FLTR_BYPASS)
+ return false;
+ }
+
+ return true;
+}
+
/*
* Do core a soft reset of the core. Be careful with this because it
* resets all the internal state machines of the core.
@@ -246,9 +317,30 @@ int dwc2_core_reset(struct dwc2_hsotg *hsotg)
{
u32 greset;
int count = 0;
+ bool wait_for_host_mode = false;
dev_vdbg(hsotg->dev, "%s()\n", __func__);
+ /*
+ * If the current mode is host, either due to the force mode
+ * bit being set (which persists after core reset) or the
+ * connector id pin, a core soft reset will temporarily reset
+ * the mode to device. A delay from the IDDIG debounce filter
+ * will occur before going back to host mode.
+ *
+ * Determine whether we will go back into host mode after a
+ * reset and account for this delay after the reset.
+ */
+ if (dwc2_iddig_filter_enabled(hsotg)) {
+ u32 gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
+ u32 gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
+
+ if (!(gotgctl & GOTGCTL_CONID_B) ||
+ (gusbcfg & GUSBCFG_FORCEHOSTMODE)) {
+ wait_for_host_mode = true;
+ }
+ }
+
/* Core Soft Reset */
greset = dwc2_readl(hsotg->regs + GRSTCTL);
greset |= GRSTCTL_CSFTRST;
@@ -277,6 +369,9 @@ int dwc2_core_reset(struct dwc2_hsotg *hsotg)
}
} while (!(greset & GRSTCTL_AHBIDLE));
+ if (wait_for_host_mode)
+ dwc2_wait_for_mode(hsotg, true);
+
return 0;
}
@@ -300,9 +395,9 @@ int dwc2_core_reset(struct dwc2_hsotg *hsotg)
* Checks are done in this function to determine whether doing a force
* would be valid or not.
*
- * If a force is done, it requires a 25ms delay to take effect.
- *
- * Returns true if the mode was forced.
+ * If a force is done, it requires a IDDIG debounce filter delay if
+ * the filter is configured and enabled. We poll the current mode of
+ * the controller to account for this delay.
*/
static bool dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host)
{
@@ -337,12 +432,18 @@ static bool dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host)
gusbcfg |= set;
dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
- msleep(25);
+ dwc2_wait_for_mode(hsotg, host);
return true;
}
-/*
- * Clears the force mode bits.
+/**
+ * dwc2_clear_force_mode() - Clears the force mode bits.
+ *
+ * After clearing the bits, wait up to 100 ms to account for any
+ * potential IDDIG filter delay. We can't know if we expect this delay
+ * or not because the value of the connector ID status is affected by
+ * the force mode. We only need to call this once during probe if
+ * dr_mode == OTG.
*/
static void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg)
{
@@ -353,11 +454,8 @@ static void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg)
gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
- /*
- * NOTE: This long sleep is _very_ important, otherwise the core will
- * not stay in host mode after a connector ID change!
- */
- msleep(25);
+ if (dwc2_iddig_filter_enabled(hsotg))
+ usleep_range(100000, 110000);
}
/*
@@ -380,12 +478,6 @@ void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg)
__func__, hsotg->dr_mode);
break;
}
-
- /*
- * NOTE: This is required for some rockchip soc based
- * platforms.
- */
- msleep(50);
}
/*
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index d64551243789..aad4107ef927 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -259,13 +259,6 @@ enum dwc2_lx_state {
DWC2_L3, /* Off state */
};
-/*
- * Gadget periodic tx fifo sizes as used by legacy driver
- * EP0 is not included
- */
-#define DWC2_G_P_LEGACY_TX_FIFO_SIZE {256, 256, 256, 256, 768, 768, 768, \
- 768, 0, 0, 0, 0, 0, 0, 0}
-
/* Gadget ep0 states */
enum dwc2_ep0_state {
DWC2_EP0_SETUP,
@@ -890,6 +883,7 @@ struct dwc2_hsotg {
#define DWC2_CORE_REV_2_92a 0x4f54292a
#define DWC2_CORE_REV_2_94a 0x4f54294a
#define DWC2_CORE_REV_3_00a 0x4f54300a
+#define DWC2_CORE_REV_3_10a 0x4f54310a
#if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
union dwc2_hcd_internal_flags {
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index af46adfae41c..4cd6403a7566 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -186,9 +186,10 @@ static void dwc2_hsotg_ctrl_epint(struct dwc2_hsotg *hsotg,
*/
static void dwc2_hsotg_init_fifo(struct dwc2_hsotg *hsotg)
{
- unsigned int ep;
+ unsigned int fifo;
unsigned int addr;
int timeout;
+ u32 dptxfsizn;
u32 val;
/* Reset fifo map if not correctly cleared during previous session */
@@ -216,16 +217,16 @@ static void dwc2_hsotg_init_fifo(struct dwc2_hsotg *hsotg)
* them to endpoints dynamically according to maxpacket size value of
* given endpoint.
*/
- for (ep = 1; ep < MAX_EPS_CHANNELS; ep++) {
- if (!hsotg->g_tx_fifo_sz[ep])
- continue;
- val = addr;
- val |= hsotg->g_tx_fifo_sz[ep] << FIFOSIZE_DEPTH_SHIFT;
- WARN_ONCE(addr + hsotg->g_tx_fifo_sz[ep] > hsotg->fifo_mem,
- "insufficient fifo memory");
- addr += hsotg->g_tx_fifo_sz[ep];
+ for (fifo = 1; fifo < MAX_EPS_CHANNELS; fifo++) {
+ dptxfsizn = dwc2_readl(hsotg->regs + DPTXFSIZN(fifo));
+
+ val = (dptxfsizn & FIFOSIZE_DEPTH_MASK) | addr;
+ addr += dptxfsizn >> FIFOSIZE_DEPTH_SHIFT;
+
+ if (addr > hsotg->fifo_mem)
+ break;
- dwc2_writel(val, hsotg->regs + DPTXFSIZN(ep));
+ dwc2_writel(val, hsotg->regs + DPTXFSIZN(fifo));
}
/*
@@ -388,7 +389,8 @@ static int dwc2_hsotg_write_fifo(struct dwc2_hsotg *hsotg,
return -ENOSPC;
}
} else if (hsotg->dedicated_fifos && hs_ep->index != 0) {
- can_write = dwc2_readl(hsotg->regs + DTXFSTS(hs_ep->index));
+ can_write = dwc2_readl(hsotg->regs +
+ DTXFSTS(hs_ep->fifo_index));
can_write &= 0xffff;
can_write *= 4;
@@ -2432,7 +2434,7 @@ static void kill_all_requests(struct dwc2_hsotg *hsotg,
if (!hsotg->dedicated_fifos)
return;
- size = (dwc2_readl(hsotg->regs + DTXFSTS(ep->index)) & 0xffff) * 4;
+ size = (dwc2_readl(hsotg->regs + DTXFSTS(ep->fifo_index)) & 0xffff) * 4;
if (size < ep->fifo_size)
dwc2_hsotg_txfifo_flush(hsotg, ep->fifo_index);
}
@@ -3041,22 +3043,11 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
break;
}
- /* If fifo is already allocated for this ep */
- if (hs_ep->fifo_index) {
- size = hs_ep->ep.maxpacket * hs_ep->mc;
- /* If bigger fifo is required deallocate current one */
- if (size > hs_ep->fifo_size) {
- hsotg->fifo_map &= ~(1 << hs_ep->fifo_index);
- hs_ep->fifo_index = 0;
- hs_ep->fifo_size = 0;
- }
- }
-
/*
* if the hardware has dedicated fifos, we must give each IN EP
* a unique tx-fifo even if it is non-periodic.
*/
- if (dir_in && hsotg->dedicated_fifos && !hs_ep->fifo_index) {
+ if (dir_in && hsotg->dedicated_fifos) {
u32 fifo_index = 0;
u32 fifo_size = UINT_MAX;
size = hs_ep->ep.maxpacket*hs_ep->mc;
@@ -3129,10 +3120,6 @@ static int dwc2_hsotg_ep_disable(struct usb_ep *ep)
spin_lock_irqsave(&hsotg->lock, flags);
- hsotg->fifo_map &= ~(1<<hs_ep->fifo_index);
- hs_ep->fifo_index = 0;
- hs_ep->fifo_size = 0;
-
ctrl = dwc2_readl(hsotg->regs + epctrl_reg);
ctrl &= ~DXEPCTL_EPENA;
ctrl &= ~DXEPCTL_USBACTEP;
@@ -3147,6 +3134,10 @@ static int dwc2_hsotg_ep_disable(struct usb_ep *ep)
/* terminate all requests with shutdown */
kill_all_requests(hsotg, hs_ep, -ESHUTDOWN);
+ hsotg->fifo_map &= ~(1 << hs_ep->fifo_index);
+ hs_ep->fifo_index = 0;
+ hs_ep->fifo_size = 0;
+
spin_unlock_irqrestore(&hsotg->lock, flags);
return 0;
}
@@ -3475,8 +3466,11 @@ static int dwc2_hsotg_udc_start(struct usb_gadget *gadget,
otg_set_peripheral(hsotg->uphy->otg, &hsotg->gadget);
spin_lock_irqsave(&hsotg->lock, flags);
- dwc2_hsotg_init(hsotg);
- dwc2_hsotg_core_init_disconnected(hsotg, false);
+ if (dwc2_hw_is_device(hsotg)) {
+ dwc2_hsotg_init(hsotg);
+ dwc2_hsotg_core_init_disconnected(hsotg, false);
+ }
+
hsotg->enabled = 0;
spin_unlock_irqrestore(&hsotg->lock, flags);
@@ -3813,36 +3807,10 @@ static void dwc2_hsotg_dump(struct dwc2_hsotg *hsotg)
static void dwc2_hsotg_of_probe(struct dwc2_hsotg *hsotg)
{
struct device_node *np = hsotg->dev->of_node;
- u32 len = 0;
- u32 i = 0;
/* Enable dma if requested in device tree */
hsotg->g_using_dma = of_property_read_bool(np, "g-use-dma");
- /*
- * Register TX periodic fifo size per endpoint.
- * EP0 is excluded since it has no fifo configuration.
- */
- if (!of_find_property(np, "g-tx-fifo-size", &len))
- goto rx_fifo;
-
- len /= sizeof(u32);
-
- /* Read tx fifo sizes other than ep0 */
- if (of_property_read_u32_array(np, "g-tx-fifo-size",
- &hsotg->g_tx_fifo_sz[1], len))
- goto rx_fifo;
-
- /* Add ep0 */
- len++;
-
- /* Make remaining TX fifos unavailable */
- if (len < MAX_EPS_CHANNELS) {
- for (i = len; i < MAX_EPS_CHANNELS; i++)
- hsotg->g_tx_fifo_sz[i] = 0;
- }
-
-rx_fifo:
/* Register RX fifo size */
of_property_read_u32(np, "g-rx-fifo-size", &hsotg->g_rx_fifo_sz);
@@ -3864,13 +3832,10 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
struct device *dev = hsotg->dev;
int epnum;
int ret;
- int i;
- u32 p_tx_fifo[] = DWC2_G_P_LEGACY_TX_FIFO_SIZE;
/* Initialize to legacy fifo configuration values */
hsotg->g_rx_fifo_sz = 2048;
hsotg->g_np_g_tx_fifo_sz = 1024;
- memcpy(&hsotg->g_tx_fifo_sz[1], p_tx_fifo, sizeof(p_tx_fifo));
/* Device tree specific probe */
dwc2_hsotg_of_probe(hsotg);
@@ -3888,9 +3853,6 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
dev_dbg(dev, "NonPeriodic TXFIFO size: %d\n",
hsotg->g_np_g_tx_fifo_sz);
dev_dbg(dev, "RXFIFO size: %d\n", hsotg->g_rx_fifo_sz);
- for (i = 0; i < MAX_EPS_CHANNELS; i++)
- dev_dbg(dev, "Periodic TXFIFO%2d size: %d\n", i,
- hsotg->g_tx_fifo_sz[i]);
hsotg->gadget.max_speed = USB_SPEED_HIGH;
hsotg->gadget.ops = &dwc2_hsotg_gadget_ops;
@@ -3908,17 +3870,13 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
hsotg->ctrl_buff = devm_kzalloc(hsotg->dev,
DWC2_CTRL_BUFF_SIZE, GFP_KERNEL);
- if (!hsotg->ctrl_buff) {
- dev_err(dev, "failed to allocate ctrl request buff\n");
+ if (!hsotg->ctrl_buff)
return -ENOMEM;
- }
hsotg->ep0_buff = devm_kzalloc(hsotg->dev,
DWC2_CTRL_BUFF_SIZE, GFP_KERNEL);
- if (!hsotg->ep0_buff) {
- dev_err(dev, "failed to allocate ctrl reply buff\n");
+ if (!hsotg->ep0_buff)
return -ENOMEM;
- }
ret = devm_request_irq(hsotg->dev, irq, dwc2_hsotg_irq, IRQF_SHARED,
dev_name(hsotg->dev), hsotg);
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 2df3d04d26f5..df5a06578005 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -5040,7 +5040,7 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq)
/* Create new workqueue and init work */
retval = -ENOMEM;
- hsotg->wq_otg = create_singlethread_workqueue("dwc2");
+ hsotg->wq_otg = alloc_ordered_workqueue("dwc2", 0);
if (!hsotg->wq_otg) {
dev_err(hsotg->dev, "Failed to create workqueue\n");
goto error2;
diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h
index efc3bcde2822..91058441e62a 100644
--- a/drivers/usb/dwc2/hw.h
+++ b/drivers/usb/dwc2/hw.h
@@ -48,6 +48,7 @@
#define GOTGCTL_ASESVLD (1 << 18)
#define GOTGCTL_DBNC_SHORT (1 << 17)
#define GOTGCTL_CONID_B (1 << 16)
+#define GOTGCTL_DBNCE_FLTR_BYPASS (1 << 15)
#define GOTGCTL_DEVHNPEN (1 << 11)
#define GOTGCTL_HSTSETHNPEN (1 << 10)
#define GOTGCTL_HNPREQ (1 << 9)
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index a64ce1c94d6d..b97cde76914d 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -1,7 +1,7 @@
config USB_DWC3
tristate "DesignWare USB3 DRD Core Support"
depends on (USB || USB_GADGET) && HAS_DMA
- select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
+ select USB_XHCI_PLATFORM if USB_XHCI_HCD
help
Say Y or M here if your system has a Dual Role SuperSpeed
USB controller based on the DesignWare USB3 IP Core.
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 35d092456bec..7287a763cd0c 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -49,6 +49,57 @@
#define DWC3_DEFAULT_AUTOSUSPEND_DELAY 5000 /* ms */
+/**
+ * dwc3_get_dr_mode - Validates and sets dr_mode
+ * @dwc: pointer to our context structure
+ */
+static int dwc3_get_dr_mode(struct dwc3 *dwc)
+{
+ enum usb_dr_mode mode;
+ struct device *dev = dwc->dev;
+ unsigned int hw_mode;
+
+ if (dwc->dr_mode == USB_DR_MODE_UNKNOWN)
+ dwc->dr_mode = USB_DR_MODE_OTG;
+
+ mode = dwc->dr_mode;
+ hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+
+ switch (hw_mode) {
+ case DWC3_GHWPARAMS0_MODE_GADGET:
+ if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) {
+ dev_err(dev,
+ "Controller does not support host mode.\n");
+ return -EINVAL;
+ }
+ mode = USB_DR_MODE_PERIPHERAL;
+ break;
+ case DWC3_GHWPARAMS0_MODE_HOST:
+ if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) {
+ dev_err(dev,
+ "Controller does not support device mode.\n");
+ return -EINVAL;
+ }
+ mode = USB_DR_MODE_HOST;
+ break;
+ default:
+ if (IS_ENABLED(CONFIG_USB_DWC3_HOST))
+ mode = USB_DR_MODE_HOST;
+ else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET))
+ mode = USB_DR_MODE_PERIPHERAL;
+ }
+
+ if (mode != dwc->dr_mode) {
+ dev_warn(dev,
+ "Configuration mismatch. dr_mode forced to %s\n",
+ mode == USB_DR_MODE_HOST ? "host" : "gadget");
+
+ dwc->dr_mode = mode;
+ }
+
+ return 0;
+}
+
void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
{
u32 reg;
@@ -448,6 +499,9 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
if (dwc->dis_u3_susphy_quirk)
reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
+ if (dwc->dis_del_phy_power_chg_quirk)
+ reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE;
+
dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
@@ -485,6 +539,23 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
break;
}
+ switch (dwc->hsphy_mode) {
+ case USBPHY_INTERFACE_MODE_UTMI:
+ reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK |
+ DWC3_GUSB2PHYCFG_USBTRDTIM_MASK);
+ reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_8_BIT) |
+ DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_8_BIT);
+ break;
+ case USBPHY_INTERFACE_MODE_UTMIW:
+ reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK |
+ DWC3_GUSB2PHYCFG_USBTRDTIM_MASK);
+ reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_16_BIT) |
+ DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_16_BIT);
+ break;
+ default:
+ break;
+ }
+
/*
* Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to
* '0' during coreConsultant configuration. So default value will
@@ -500,6 +571,9 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
if (dwc->dis_enblslpm_quirk)
reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
+ if (dwc->dis_u2_freeclk_exists_quirk)
+ reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS;
+
dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
return 0;
@@ -666,6 +740,32 @@ static int dwc3_core_init(struct dwc3 *dwc)
goto err4;
}
+ switch (dwc->dr_mode) {
+ case USB_DR_MODE_PERIPHERAL:
+ dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
+ break;
+ case USB_DR_MODE_HOST:
+ dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST);
+ break;
+ case USB_DR_MODE_OTG:
+ dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
+ break;
+ default:
+ dev_warn(dwc->dev, "Unsupported mode %d\n", dwc->dr_mode);
+ break;
+ }
+
+ /*
+ * ENDXFER polling is available on version 3.10a and later of
+ * the DWC_usb3 controller. It is NOT available in the
+ * DWC_usb31 controller.
+ */
+ if (!dwc3_is_usb31(dwc) && dwc->revision >= DWC3_REVISION_310A) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUCTL2);
+ reg |= DWC3_GUCTL2_RST_ACTBITLATER;
+ dwc3_writel(dwc->regs, DWC3_GUCTL2, reg);
+ }
+
return 0;
err4:
@@ -763,7 +863,6 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
switch (dwc->dr_mode) {
case USB_DR_MODE_PERIPHERAL:
- dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
ret = dwc3_gadget_init(dwc);
if (ret) {
if (ret != -EPROBE_DEFER)
@@ -772,7 +871,6 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
}
break;
case USB_DR_MODE_HOST:
- dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST);
ret = dwc3_host_init(dwc);
if (ret) {
if (ret != -EPROBE_DEFER)
@@ -781,7 +879,6 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
}
break;
case USB_DR_MODE_OTG:
- dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
ret = dwc3_host_init(dwc);
if (ret) {
if (ret != -EPROBE_DEFER)
@@ -888,6 +985,7 @@ static int dwc3_probe(struct platform_device *pdev)
dwc->maximum_speed = usb_get_maximum_speed(dev);
dwc->dr_mode = usb_get_dr_mode(dev);
+ dwc->hsphy_mode = of_usb_get_phy_mode(dev->of_node);
dwc->has_lpm_erratum = device_property_read_bool(dev,
"snps,has-lpm-erratum");
@@ -924,6 +1022,10 @@ static int dwc3_probe(struct platform_device *pdev)
"snps,dis_enblslpm_quirk");
dwc->dis_rxdet_inp3_quirk = device_property_read_bool(dev,
"snps,dis_rxdet_inp3_quirk");
+ dwc->dis_u2_freeclk_exists_quirk = device_property_read_bool(dev,
+ "snps,dis-u2-freeclk-exists-quirk");
+ dwc->dis_del_phy_power_chg_quirk = device_property_read_bool(dev,
+ "snps,dis-del-phy-power-chg-quirk");
dwc->tx_de_emphasis_quirk = device_property_read_bool(dev,
"snps,tx_de_emphasis_quirk");
@@ -972,17 +1074,9 @@ static int dwc3_probe(struct platform_device *pdev)
goto err2;
}
- if (IS_ENABLED(CONFIG_USB_DWC3_HOST) &&
- (dwc->dr_mode == USB_DR_MODE_OTG ||
- dwc->dr_mode == USB_DR_MODE_UNKNOWN))
- dwc->dr_mode = USB_DR_MODE_HOST;
- else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET) &&
- (dwc->dr_mode == USB_DR_MODE_OTG ||
- dwc->dr_mode == USB_DR_MODE_UNKNOWN))
- dwc->dr_mode = USB_DR_MODE_PERIPHERAL;
-
- if (dwc->dr_mode == USB_DR_MODE_UNKNOWN)
- dwc->dr_mode = USB_DR_MODE_OTG;
+ ret = dwc3_get_dr_mode(dwc);
+ if (ret)
+ goto err3;
ret = dwc3_alloc_scratch_buffers(dwc);
if (ret)
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 45d6de5107c7..6b60e42626a2 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -109,6 +109,7 @@
#define DWC3_GPRTBIMAP_HS1 0xc184
#define DWC3_GPRTBIMAP_FS0 0xc188
#define DWC3_GPRTBIMAP_FS1 0xc18c
+#define DWC3_GUCTL2 0xc19c
#define DWC3_VER_NUMBER 0xc1a0
#define DWC3_VER_TYPE 0xc1a4
@@ -199,9 +200,18 @@
/* Global USB2 PHY Configuration Register */
#define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31)
+#define DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS (1 << 30)
#define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6)
#define DWC3_GUSB2PHYCFG_ULPI_UTMI (1 << 4)
#define DWC3_GUSB2PHYCFG_ENBLSLPM (1 << 8)
+#define DWC3_GUSB2PHYCFG_PHYIF(n) (n << 3)
+#define DWC3_GUSB2PHYCFG_PHYIF_MASK DWC3_GUSB2PHYCFG_PHYIF(1)
+#define DWC3_GUSB2PHYCFG_USBTRDTIM(n) (n << 10)
+#define DWC3_GUSB2PHYCFG_USBTRDTIM_MASK DWC3_GUSB2PHYCFG_USBTRDTIM(0xf)
+#define USBTRDTIM_UTMI_8_BIT 9
+#define USBTRDTIM_UTMI_16_BIT 5
+#define UTMI_PHYIF_16_BIT 1
+#define UTMI_PHYIF_8_BIT 0
/* Global USB2 PHY Vendor Control Register */
#define DWC3_GUSB2PHYACC_NEWREGREQ (1 << 25)
@@ -235,7 +245,10 @@
#define DWC3_GEVNTSIZ_SIZE(n) ((n) & 0xffff)
/* Global HWPARAMS0 Register */
-#define DWC3_GHWPARAMS0_USB3_MODE(n) ((n) & 0x3)
+#define DWC3_GHWPARAMS0_MODE(n) ((n) & 0x3)
+#define DWC3_GHWPARAMS0_MODE_GADGET 0
+#define DWC3_GHWPARAMS0_MODE_HOST 1
+#define DWC3_GHWPARAMS0_MODE_DRD 2
#define DWC3_GHWPARAMS0_MBUS_TYPE(n) (((n) >> 3) & 0x7)
#define DWC3_GHWPARAMS0_SBUS_TYPE(n) (((n) >> 6) & 0x3)
#define DWC3_GHWPARAMS0_MDWIDTH(n) (((n) >> 8) & 0xff)
@@ -279,6 +292,9 @@
#define DWC3_GFLADJ_30MHZ_SDBND_SEL (1 << 7)
#define DWC3_GFLADJ_30MHZ_MASK 0x3f
+/* Global User Control Register 2 */
+#define DWC3_GUCTL2_RST_ACTBITLATER (1 << 14)
+
/* Device Configuration Register */
#define DWC3_DCFG_DEVADDR(addr) ((addr) << 3)
#define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f)
@@ -685,6 +701,8 @@ struct dwc3_hwparams {
* @request: struct usb_request to be transferred
* @list: a list_head used for request queueing
* @dep: struct dwc3_ep owning this request
+ * @sg: pointer to first incomplete sg
+ * @num_pending_sgs: counter to pending sgs
* @first_trb_index: index to first trb used by this request
* @epnum: endpoint number to which this request refers
* @trb: pointer to struct dwc3_trb
@@ -697,7 +715,9 @@ struct dwc3_request {
struct usb_request request;
struct list_head list;
struct dwc3_ep *dep;
+ struct scatterlist *sg;
+ unsigned num_pending_sgs;
u8 first_trb_index;
u8 epnum;
struct dwc3_trb *trb;
@@ -743,6 +763,9 @@ struct dwc3_scratchpad_array {
* @maximum_speed: maximum speed requested (mainly for testing purposes)
* @revision: revision register contents
* @dr_mode: requested mode of operation
+ * @hsphy_mode: UTMI phy mode, one of following:
+ * - USBPHY_INTERFACE_MODE_UTMI
+ * - USBPHY_INTERFACE_MODE_UTMIW
* @usb2_phy: pointer to USB2 PHY
* @usb3_phy: pointer to USB3 PHY
* @usb2_generic_phy: pointer to USB2 PHY
@@ -799,6 +822,11 @@ struct dwc3_scratchpad_array {
* @dis_u2_susphy_quirk: set if we disable usb2 suspend phy
* @dis_enblslpm_quirk: set if we clear enblslpm in GUSB2PHYCFG,
* disabling the suspend signal to the PHY.
+ * @dis_u2_freeclk_exists_quirk : set if we clear u2_freeclk_exists
+ * in GUSB2PHYCFG, specify that USB2 PHY doesn't
+ * provide a free-running PHY clock.
+ * @dis_del_phy_power_chg_quirk: set if we disable delay phy power
+ * change quirk.
* @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
* @tx_de_emphasis: Tx de-emphasis value
* 0 - -6dB de-emphasis
@@ -845,6 +873,7 @@ struct dwc3 {
size_t regs_size;
enum usb_dr_mode dr_mode;
+ enum usb_phy_interface hsphy_mode;
u32 fladj;
u32 irq_gadget;
@@ -880,6 +909,8 @@ struct dwc3 {
#define DWC3_REVISION_260A 0x5533260a
#define DWC3_REVISION_270A 0x5533270a
#define DWC3_REVISION_280A 0x5533280a
+#define DWC3_REVISION_300A 0x5533300a
+#define DWC3_REVISION_310A 0x5533310a
/*
* NOTICE: we're using bit 31 as a "is usb 3.1" flag. This is really
@@ -942,6 +973,8 @@ struct dwc3 {
unsigned dis_u2_susphy_quirk:1;
unsigned dis_enblslpm_quirk:1;
unsigned dis_rxdet_inp3_quirk:1;
+ unsigned dis_u2_freeclk_exists_quirk:1;
+ unsigned dis_del_phy_power_chg_quirk:1;
unsigned tx_de_emphasis_quirk:1;
unsigned tx_de_emphasis:2;
diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
index e56d59b19a0e..fe414e7a9c78 100644
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -36,36 +36,25 @@ struct dwc3_of_simple {
int num_clocks;
};
-static int dwc3_of_simple_probe(struct platform_device *pdev)
+static int dwc3_of_simple_clk_init(struct dwc3_of_simple *simple, int count)
{
- struct dwc3_of_simple *simple;
- struct device *dev = &pdev->dev;
+ struct device *dev = simple->dev;
struct device_node *np = dev->of_node;
-
- unsigned int count;
- int ret;
int i;
- simple = devm_kzalloc(dev, sizeof(*simple), GFP_KERNEL);
- if (!simple)
- return -ENOMEM;
+ simple->num_clocks = count;
- count = of_clk_get_parent_count(np);
if (!count)
- return -ENOENT;
-
- simple->num_clocks = count;
+ return 0;
simple->clks = devm_kcalloc(dev, simple->num_clocks,
sizeof(struct clk *), GFP_KERNEL);
if (!simple->clks)
return -ENOMEM;
- platform_set_drvdata(pdev, simple);
- simple->dev = dev;
-
for (i = 0; i < simple->num_clocks; i++) {
struct clk *clk;
+ int ret;
clk = of_clk_get(np, i);
if (IS_ERR(clk)) {
@@ -88,6 +77,29 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
simple->clks[i] = clk;
}
+ return 0;
+}
+
+static int dwc3_of_simple_probe(struct platform_device *pdev)
+{
+ struct dwc3_of_simple *simple;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+
+ int ret;
+ int i;
+
+ simple = devm_kzalloc(dev, sizeof(*simple), GFP_KERNEL);
+ if (!simple)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, simple);
+ simple->dev = dev;
+
+ ret = dwc3_of_simple_clk_init(simple, of_clk_get_parent_count(np));
+ if (ret)
+ return ret;
+
ret = of_platform_populate(np, NULL, NULL, dev);
if (ret) {
for (i = 0; i < simple->num_clocks; i++) {
@@ -112,7 +124,7 @@ static int dwc3_of_simple_remove(struct platform_device *pdev)
int i;
for (i = 0; i < simple->num_clocks; i++) {
- clk_unprepare(simple->clks[i]);
+ clk_disable_unprepare(simple->clks[i]);
clk_put(simple->clks[i]);
}
@@ -162,7 +174,9 @@ static const struct dev_pm_ops dwc3_of_simple_dev_pm_ops = {
static const struct of_device_id of_dwc3_simple_match[] = {
{ .compatible = "qcom,dwc3" },
+ { .compatible = "rockchip,rk3399-dwc3" },
{ .compatible = "xlnx,zynqmp-dwc3" },
+ { .compatible = "cavium,octeon-7130-usb-uctl" },
{ /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, of_dwc3_simple_match);
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 122e64df2f4d..07cc8929f271 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -174,15 +174,8 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
int status)
{
struct dwc3 *dwc = dep->dwc;
- int i;
- if (req->started) {
- i = 0;
- do {
- dwc3_ep_inc_deq(dep);
- } while(++i < req->request.num_mapped_sgs);
- req->started = false;
- }
+ req->started = false;
list_del(&req->list);
req->trb = NULL;
@@ -348,7 +341,8 @@ static int dwc3_send_clear_stall_ep_cmd(struct dwc3_ep *dep)
* IN transfers due to a mishandled error condition. Synopsys
* STAR 9000614252.
*/
- if (dep->direction && (dwc->revision >= DWC3_REVISION_260A))
+ if (dep->direction && (dwc->revision >= DWC3_REVISION_260A) &&
+ (dwc->gadget.speed >= USB_SPEED_SUPER))
cmd |= DWC3_DEPCMD_CLEARPENDIN;
memset(&params, 0, sizeof(params));
@@ -490,7 +484,8 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
params.param0 |= DWC3_DEPCFG_ACTION_INIT;
}
- params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN;
+ if (usb_endpoint_xfer_control(desc))
+ params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN;
if (dep->number <= 1 || usb_endpoint_xfer_isoc(desc))
params.param1 |= DWC3_DEPCFG_XFER_NOT_READY_EN;
@@ -764,6 +759,8 @@ static void dwc3_gadget_ep_free_request(struct usb_ep *ep,
kfree(req);
}
+static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep);
+
/**
* dwc3_prepare_one_trb - setup one TRB from one request
* @dep: endpoint for which this request is prepared
@@ -771,15 +768,13 @@ static void dwc3_gadget_ep_free_request(struct usb_ep *ep,
*/
static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
struct dwc3_request *req, dma_addr_t dma,
- unsigned length, unsigned last, unsigned chain, unsigned node)
+ unsigned length, unsigned chain, unsigned node)
{
struct dwc3_trb *trb;
- dwc3_trace(trace_dwc3_gadget, "%s: req %p dma %08llx length %d%s%s",
+ dwc3_trace(trace_dwc3_gadget, "%s: req %p dma %08llx length %d%s",
dep->name, req, (unsigned long long) dma,
- length, last ? " last" : "",
- chain ? " chain" : "");
-
+ length, chain ? " chain" : "");
trb = &dep->trb_pool[dep->trb_enqueue];
@@ -826,12 +821,10 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
/* always enable Continue on Short Packet */
trb->ctrl |= DWC3_TRB_CTRL_CSP;
- if (!req->request.no_interrupt && !chain)
+ if ((!req->request.no_interrupt && !chain) ||
+ (dwc3_calc_trbs_left(dep) == 0))
trb->ctrl |= DWC3_TRB_CTRL_IOC | DWC3_TRB_CTRL_ISP_IMI;
- if (last && !usb_endpoint_xfer_isoc(dep->endpoint.desc))
- trb->ctrl |= DWC3_TRB_CTRL_LST;
-
if (chain)
trb->ctrl |= DWC3_TRB_CTRL_CHN;
@@ -856,12 +849,12 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
*/
static struct dwc3_trb *dwc3_ep_prev_trb(struct dwc3_ep *dep, u8 index)
{
- if (!index)
- index = DWC3_TRB_NUM - 2;
- else
- index = dep->trb_enqueue - 1;
+ u8 tmp = index;
- return &dep->trb_pool[index];
+ if (!tmp)
+ tmp = DWC3_TRB_NUM - 1;
+
+ return &dep->trb_pool[tmp - 1];
}
static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep)
@@ -894,65 +887,42 @@ static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep)
}
static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
- struct dwc3_request *req, unsigned int trbs_left,
- unsigned int more_coming)
+ struct dwc3_request *req)
{
- struct usb_request *request = &req->request;
- struct scatterlist *sg = request->sg;
+ struct scatterlist *sg = req->sg;
struct scatterlist *s;
- unsigned int last = false;
unsigned int length;
dma_addr_t dma;
int i;
- for_each_sg(sg, s, request->num_mapped_sgs, i) {
+ for_each_sg(sg, s, req->num_pending_sgs, i) {
unsigned chain = true;
length = sg_dma_len(s);
dma = sg_dma_address(s);
- if (sg_is_last(s)) {
- if (usb_endpoint_xfer_int(dep->endpoint.desc) ||
- !more_coming)
- last = true;
-
- chain = false;
- }
-
- if (!trbs_left--)
- last = true;
-
- if (last)
+ if (sg_is_last(s))
chain = false;
dwc3_prepare_one_trb(dep, req, dma, length,
- last, chain, i);
+ chain, i);
- if (last)
+ if (!dwc3_calc_trbs_left(dep))
break;
}
}
static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep,
- struct dwc3_request *req, unsigned int trbs_left,
- unsigned int more_coming)
+ struct dwc3_request *req)
{
- unsigned int last = false;
unsigned int length;
dma_addr_t dma;
dma = req->request.dma;
length = req->request.length;
- if (!trbs_left)
- last = true;
-
- /* Is this the last request? */
- if (usb_endpoint_xfer_int(dep->endpoint.desc) || !more_coming)
- last = true;
-
dwc3_prepare_one_trb(dep, req, dma, length,
- last, false, 0);
+ false, 0);
}
/*
@@ -966,26 +936,19 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep,
static void dwc3_prepare_trbs(struct dwc3_ep *dep)
{
struct dwc3_request *req, *n;
- unsigned int more_coming;
- u32 trbs_left;
BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM);
- trbs_left = dwc3_calc_trbs_left(dep);
- if (!trbs_left)
+ if (!dwc3_calc_trbs_left(dep))
return;
- more_coming = dep->allocated_requests - dep->queued_requests;
-
list_for_each_entry_safe(req, n, &dep->pending_list, list) {
- if (req->request.num_mapped_sgs > 0)
- dwc3_prepare_one_trb_sg(dep, req, trbs_left--,
- more_coming);
+ if (req->num_pending_sgs > 0)
+ dwc3_prepare_one_trb_sg(dep, req);
else
- dwc3_prepare_one_trb_linear(dep, req, trbs_left--,
- more_coming);
+ dwc3_prepare_one_trb_linear(dep, req);
- if (!trbs_left)
+ if (!dwc3_calc_trbs_left(dep))
return;
}
}
@@ -1101,93 +1064,29 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
trace_dwc3_ep_queue(req);
- /*
- * We only add to our list of requests now and
- * start consuming the list once we get XferNotReady
- * IRQ.
- *
- * That way, we avoid doing anything that we don't need
- * to do now and defer it until the point we receive a
- * particular token from the Host side.
- *
- * This will also avoid Host cancelling URBs due to too
- * many NAKs.
- */
ret = usb_gadget_map_request(&dwc->gadget, &req->request,
dep->direction);
if (ret)
return ret;
- list_add_tail(&req->list, &dep->pending_list);
-
- /*
- * If there are no pending requests and the endpoint isn't already
- * busy, we will just start the request straight away.
- *
- * This will save one IRQ (XFER_NOT_READY) and possibly make it a
- * little bit faster.
- */
- if (!usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
- !usb_endpoint_xfer_int(dep->endpoint.desc)) {
- ret = __dwc3_gadget_kick_transfer(dep, 0);
- goto out;
- }
-
- /*
- * There are a few special cases:
- *
- * 1. XferNotReady with empty list of requests. We need to kick the
- * transfer here in that situation, otherwise we will be NAKing
- * forever. If we get XferNotReady before gadget driver has a
- * chance to queue a request, we will ACK the IRQ but won't be
- * able to receive the data until the next request is queued.
- * The following code is handling exactly that.
- *
- */
- if (dep->flags & DWC3_EP_PENDING_REQUEST) {
- /*
- * If xfernotready is already elapsed and it is a case
- * of isoc transfer, then issue END TRANSFER, so that
- * you can receive xfernotready again and can have
- * notion of current microframe.
- */
- if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
- if (list_empty(&dep->started_list)) {
- dwc3_stop_active_transfer(dwc, dep->number, true);
- dep->flags = DWC3_EP_ENABLED;
- }
- return 0;
- }
-
- ret = __dwc3_gadget_kick_transfer(dep, 0);
- if (!ret)
- dep->flags &= ~DWC3_EP_PENDING_REQUEST;
+ req->sg = req->request.sg;
+ req->num_pending_sgs = req->request.num_mapped_sgs;
- goto out;
- }
+ list_add_tail(&req->list, &dep->pending_list);
- /*
- * 2. XferInProgress on Isoc EP with an active transfer. We need to
- * kick the transfer here after queuing a request, otherwise the
- * core may not see the modified TRB(s).
- */
if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
- (dep->flags & DWC3_EP_BUSY) &&
- !(dep->flags & DWC3_EP_MISSED_ISOC)) {
- WARN_ON_ONCE(!dep->resource_index);
- ret = __dwc3_gadget_kick_transfer(dep, dep->resource_index);
- goto out;
+ dep->flags & DWC3_EP_PENDING_REQUEST) {
+ if (list_empty(&dep->started_list)) {
+ dwc3_stop_active_transfer(dwc, dep->number, true);
+ dep->flags = DWC3_EP_ENABLED;
+ }
+ return 0;
}
- /*
- * 4. Stream Capable Bulk Endpoints. We need to start the transfer
- * right away, otherwise host will not know we have streams to be
- * handled.
- */
- if (dep->stream_capable)
- ret = __dwc3_gadget_kick_transfer(dep, 0);
+ if (!dwc3_calc_trbs_left(dep))
+ return 0;
-out:
+ ret = __dwc3_gadget_kick_transfer(dep, 0);
if (ret && ret != -EBUSY)
dwc3_trace(trace_dwc3_gadget,
"%s: failed to kick transfers",
@@ -1963,6 +1862,7 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
unsigned int trb_status;
dep->queued_requests--;
+ dwc3_ep_inc_deq(dep);
trace_dwc3_complete_trb(dep, trb);
/*
@@ -1982,6 +1882,7 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
return 1;
count = trb->size & DWC3_TRB_SIZE_MASK;
+ req->request.actual += count;
if (dep->direction) {
if (count) {
@@ -2021,48 +1922,51 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
if (s_pkt && !chain)
return 1;
- if ((event->status & DEPEVT_STATUS_LST) &&
- (trb->ctrl & (DWC3_TRB_CTRL_LST |
- DWC3_TRB_CTRL_HWO)))
- return 1;
+
if ((event->status & DEPEVT_STATUS_IOC) &&
(trb->ctrl & DWC3_TRB_CTRL_IOC))
return 1;
+
return 0;
}
static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
const struct dwc3_event_depevt *event, int status)
{
- struct dwc3_request *req;
+ struct dwc3_request *req, *n;
struct dwc3_trb *trb;
- unsigned int slot;
- unsigned int i;
- int count = 0;
+ bool ioc = false;
int ret;
- do {
+ list_for_each_entry_safe(req, n, &dep->started_list, list) {
+ unsigned length;
+ unsigned actual;
int chain;
- req = next_request(&dep->started_list);
- if (WARN_ON_ONCE(!req))
- return 1;
-
- chain = req->request.num_mapped_sgs > 0;
- i = 0;
- do {
- slot = req->first_trb_index + i;
- if (slot == DWC3_TRB_NUM - 1)
- slot++;
- slot %= DWC3_TRB_NUM;
- trb = &dep->trb_pool[slot];
- count += trb->size & DWC3_TRB_SIZE_MASK;
+ length = req->request.length;
+ chain = req->num_pending_sgs > 0;
+ if (chain) {
+ struct scatterlist *sg = req->sg;
+ struct scatterlist *s;
+ unsigned int pending = req->num_pending_sgs;
+ unsigned int i;
+ for_each_sg(sg, s, pending, i) {
+ trb = &dep->trb_pool[dep->trb_dequeue];
+
+ req->sg = sg_next(s);
+ req->num_pending_sgs--;
+
+ ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb,
+ event, status, chain);
+ if (ret)
+ break;
+ }
+ } else {
+ trb = &dep->trb_pool[dep->trb_dequeue];
ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb,
event, status, chain);
- if (ret)
- break;
- } while (++i < req->request.num_mapped_sgs);
+ }
/*
* We assume here we will always receive the entire data block
@@ -2071,12 +1975,21 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
* should receive and we simply bounce the request back to the
* gadget driver for further processing.
*/
- req->request.actual += req->request.length - count;
+ actual = length - req->request.actual;
+ req->request.actual = actual;
+
+ if (ret && chain && (actual < length) && req->num_pending_sgs)
+ return __dwc3_gadget_kick_transfer(dep, 0);
+
dwc3_gadget_giveback(dep, req, status);
- if (ret)
+ if (ret) {
+ if ((event->status & DEPEVT_STATUS_IOC) &&
+ (trb->ctrl & DWC3_TRB_CTRL_IOC))
+ ioc = true;
break;
- } while (1);
+ }
+ }
/*
* Our endpoint might get disabled by another thread during
@@ -2103,10 +2016,9 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
return 1;
}
- if (usb_endpoint_xfer_isoc(dep->endpoint.desc))
- if ((event->status & DEPEVT_STATUS_IOC) &&
- (trb->ctrl & DWC3_TRB_CTRL_IOC))
- return 0;
+ if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && ioc)
+ return 0;
+
return 1;
}
@@ -2322,6 +2234,18 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force)
*
* - Issue EndTransfer WITH CMDIOC bit set
* - Wait 100us
+ *
+ * As of IP version 3.10a of the DWC_usb3 IP, the controller
+ * supports a mode to work around the above limitation. The
+ * software can poll the CMDACT bit in the DEPCMD register
+ * after issuing a EndTransfer command. This mode is enabled
+ * by writing GUCTL2[14]. This polling is already done in the
+ * dwc3_send_gadget_ep_cmd() function so if the mode is
+ * enabled, the EndTransfer command will have completed upon
+ * returning from this function and we don't need to delay for
+ * 100us.
+ *
+ * This mode is NOT available on the DWC_usb31 IP.
*/
cmd = DWC3_DEPCMD_ENDTRANSFER;
@@ -2333,7 +2257,9 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force)
WARN_ON_ONCE(ret);
dep->resource_index = 0;
dep->flags &= ~DWC3_EP_BUSY;
- udelay(100);
+
+ if (dwc3_is_usb31(dwc) || dwc->revision < DWC3_REVISION_310A)
+ udelay(100);
}
static void dwc3_stop_active_transfers(struct dwc3 *dwc)
diff --git a/drivers/usb/dwc3/ulpi.c b/drivers/usb/dwc3/ulpi.c
index ec004c6d76f2..bd86f84f3790 100644
--- a/drivers/usb/dwc3/ulpi.c
+++ b/drivers/usb/dwc3/ulpi.c
@@ -35,9 +35,9 @@ static int dwc3_ulpi_busyloop(struct dwc3 *dwc)
return -ETIMEDOUT;
}
-static int dwc3_ulpi_read(struct ulpi_ops *ops, u8 addr)
+static int dwc3_ulpi_read(struct device *dev, u8 addr)
{
- struct dwc3 *dwc = dev_get_drvdata(ops->dev);
+ struct dwc3 *dwc = dev_get_drvdata(dev);
u32 reg;
int ret;
@@ -53,9 +53,9 @@ static int dwc3_ulpi_read(struct ulpi_ops *ops, u8 addr)
return DWC3_GUSB2PHYACC_DATA(reg);
}
-static int dwc3_ulpi_write(struct ulpi_ops *ops, u8 addr, u8 val)
+static int dwc3_ulpi_write(struct device *dev, u8 addr, u8 val)
{
- struct dwc3 *dwc = dev_get_drvdata(ops->dev);
+ struct dwc3 *dwc = dev_get_drvdata(dev);
u32 reg;
reg = DWC3_GUSB2PHYACC_NEWREGREQ | DWC3_ULPI_ADDR(addr);
@@ -65,7 +65,7 @@ static int dwc3_ulpi_write(struct ulpi_ops *ops, u8 addr, u8 val)
return dwc3_ulpi_busyloop(dwc);
}
-static struct ulpi_ops dwc3_ulpi_ops = {
+static const struct ulpi_ops dwc3_ulpi_ops = {
.read = dwc3_ulpi_read,
.write = dwc3_ulpi_write,
};
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 3c3f31ceece7..8ad203296079 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -209,25 +209,6 @@ config USB_F_PRINTER
config USB_F_TCM
tristate
-choice
- tristate "USB Gadget Drivers"
- default USB_ETH
- help
- A Linux "Gadget Driver" talks to the USB Peripheral Controller
- driver through the abstract "gadget" API. Some other operating
- systems call these "client" drivers, of which "class drivers"
- are a subset (implementing a USB device class specification).
- A gadget driver implements one or more USB functions using
- the peripheral hardware.
-
- Gadget drivers are hardware-neutral, or "platform independent",
- except that they sometimes must understand quirks or limitations
- of the particular controllers they work with. For example, when
- a controller doesn't support alternate configurations or provide
- enough of the right types of endpoints, the gadget driver might
- not be able work with that controller, or might need to implement
- a less common variant of a device class protocol.
-
# this first set of drivers all depend on bulk-capable hardware.
config USB_CONFIGFS
@@ -439,6 +420,7 @@ config USB_CONFIGFS_F_HID
config USB_CONFIGFS_F_UVC
bool "USB Webcam function"
depends on USB_CONFIGFS
+ depends on VIDEO_V4L2
depends on VIDEO_DEV
select VIDEOBUF2_VMALLOC
select USB_F_UVC
@@ -475,6 +457,25 @@ config USB_CONFIGFS_F_TCM
Both protocols can work on USB2.0 and USB3.0.
UAS utilizes the USB 3.0 feature called streams support.
+choice
+ tristate "USB Gadget Drivers"
+ default USB_ETH
+ help
+ A Linux "Gadget Driver" talks to the USB Peripheral Controller
+ driver through the abstract "gadget" API. Some other operating
+ systems call these "client" drivers, of which "class drivers"
+ are a subset (implementing a USB device class specification).
+ A gadget driver implements one or more USB functions using
+ the peripheral hardware.
+
+ Gadget drivers are hardware-neutral, or "platform independent",
+ except that they sometimes must understand quirks or limitations
+ of the particular controllers they work with. For example, when
+ a controller doesn't support alternate configurations or provide
+ enough of the right types of endpoints, the gadget driver might
+ not be able work with that controller, or might need to implement
+ a less common variant of a device class protocol.
+
source "drivers/usb/gadget/legacy/Kconfig"
endchoice
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 5ebe6af7976e..32176f779861 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1893,17 +1893,21 @@ unknown:
/* functions always handle their interfaces and endpoints...
* punt other recipients (other, WUSB, ...) to the current
* configuration code.
- *
- * REVISIT it could make sense to let the composite device
- * take such requests too, if that's ever needed: to work
- * in config 0, etc.
*/
if (cdev->config) {
list_for_each_entry(f, &cdev->config->functions, list)
- if (f->req_match && f->req_match(f, ctrl))
+ if (f->req_match &&
+ f->req_match(f, ctrl, false))
goto try_fun_setup;
- f = NULL;
+ } else {
+ struct usb_configuration *c;
+ list_for_each_entry(c, &cdev->configs, list)
+ list_for_each_entry(f, &c->functions, list)
+ if (f->req_match &&
+ f->req_match(f, ctrl, true))
+ goto try_fun_setup;
}
+ f = NULL;
switch (ctrl->bRequestType & USB_RECIP_MASK) {
case USB_RECIP_INTERFACE:
diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index f9237fe2be05..3984787f8e97 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -1211,8 +1211,9 @@ static void purge_configs_funcs(struct gadget_info *gi)
list_move_tail(&f->list, &cfg->func_list);
if (f->unbind) {
- dev_err(&gi->cdev.gadget->dev, "unbind function"
- " '%s'/%p\n", f->name, f);
+ dev_dbg(&gi->cdev.gadget->dev,
+ "unbind function '%s'/%p\n",
+ f->name, f);
f->unbind(c, f);
}
}
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index 5c8429f23a89..0aeed85bb5cb 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -98,6 +98,9 @@ static int ffs_func_set_alt(struct usb_function *, unsigned, unsigned);
static void ffs_func_disable(struct usb_function *);
static int ffs_func_setup(struct usb_function *,
const struct usb_ctrlrequest *);
+static bool ffs_func_req_match(struct usb_function *,
+ const struct usb_ctrlrequest *,
+ bool config0);
static void ffs_func_suspend(struct usb_function *);
static void ffs_func_resume(struct usb_function *);
@@ -2243,7 +2246,9 @@ static int __ffs_data_got_descs(struct ffs_data *ffs,
FUNCTIONFS_HAS_SS_DESC |
FUNCTIONFS_HAS_MS_OS_DESC |
FUNCTIONFS_VIRTUAL_ADDR |
- FUNCTIONFS_EVENTFD)) {
+ FUNCTIONFS_EVENTFD |
+ FUNCTIONFS_ALL_CTRL_RECIP |
+ FUNCTIONFS_CONFIG0_SETUP)) {
ret = -ENOSYS;
goto error;
}
@@ -3094,8 +3099,9 @@ static int ffs_func_setup(struct usb_function *f,
* handle them. All other either handled by composite or
* passed to usb_configuration->setup() (if one is set). No
* matter, we will handle requests directed to endpoint here
- * as well (as it's straightforward) but what to do with any
- * other request?
+ * as well (as it's straightforward). Other request recipient
+ * types are only handled when the user flag FUNCTIONFS_ALL_CTRL_RECIP
+ * is being used.
*/
if (ffs->state != FFS_ACTIVE)
return -ENODEV;
@@ -3116,7 +3122,10 @@ static int ffs_func_setup(struct usb_function *f,
break;
default:
- return -EOPNOTSUPP;
+ if (func->ffs->user_flags & FUNCTIONFS_ALL_CTRL_RECIP)
+ ret = le16_to_cpu(creq->wIndex);
+ else
+ return -EOPNOTSUPP;
}
spin_lock_irqsave(&ffs->ev.waitq.lock, flags);
@@ -3128,6 +3137,28 @@ static int ffs_func_setup(struct usb_function *f,
return 0;
}
+static bool ffs_func_req_match(struct usb_function *f,
+ const struct usb_ctrlrequest *creq,
+ bool config0)
+{
+ struct ffs_function *func = ffs_func_from_usb(f);
+
+ if (config0 && !(func->ffs->user_flags & FUNCTIONFS_CONFIG0_SETUP))
+ return false;
+
+ switch (creq->bRequestType & USB_RECIP_MASK) {
+ case USB_RECIP_INTERFACE:
+ return ffs_func_revmap_intf(func,
+ le16_to_cpu(creq->wIndex) >= 0);
+ case USB_RECIP_ENDPOINT:
+ return ffs_func_revmap_ep(func,
+ le16_to_cpu(creq->wIndex) >= 0);
+ default:
+ return (bool) (func->ffs->user_flags &
+ FUNCTIONFS_ALL_CTRL_RECIP);
+ }
+}
+
static void ffs_func_suspend(struct usb_function *f)
{
ENTER();
@@ -3378,6 +3409,7 @@ static struct usb_function *ffs_alloc(struct usb_function_instance *fi)
func->function.set_alt = ffs_func_set_alt;
func->function.disable = ffs_func_disable;
func->function.setup = ffs_func_setup;
+ func->function.req_match = ffs_func_req_match;
func->function.suspend = ffs_func_suspend;
func->function.resume = ffs_func_resume;
func->function.free_func = ffs_free;
@@ -3470,6 +3502,11 @@ static void _ffs_free_dev(struct ffs_dev *dev)
list_del(&dev->entry);
if (dev->name_allocated)
kfree(dev->name);
+
+ /* Clear the private_data pointer to stop incorrect dev access */
+ if (dev->ffs_data)
+ dev->ffs_data->private_data = NULL;
+
kfree(dev);
if (list_empty(&ffs_devices))
functionfs_cleanup();
diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
index 51980c50546d..e2966f87c860 100644
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -365,7 +365,7 @@ static int f_hidg_open(struct inode *inode, struct file *fd)
static inline struct usb_request *hidg_alloc_ep_req(struct usb_ep *ep,
unsigned length)
{
- return alloc_ep_req(ep, length, length);
+ return alloc_ep_req(ep, length);
}
static void hidg_set_report_complete(struct usb_ep *ep, struct usb_request *req)
@@ -617,14 +617,10 @@ static int hidg_bind(struct usb_configuration *c, struct usb_function *f)
/* preallocate request and buffer */
status = -ENOMEM;
- hidg->req = usb_ep_alloc_request(hidg->in_ep, GFP_KERNEL);
+ hidg->req = alloc_ep_req(hidg->in_ep, hidg->report_length);
if (!hidg->req)
goto fail;
- hidg->req->buf = kmalloc(hidg->report_length, GFP_KERNEL);
- if (!hidg->req->buf)
- goto fail;
-
/* set descriptor dynamic values */
hidg_interface_desc.bInterfaceSubClass = hidg->bInterfaceSubClass;
hidg_interface_desc.bInterfaceProtocol = hidg->bInterfaceProtocol;
@@ -677,11 +673,8 @@ fail_free_descs:
usb_free_all_descriptors(f);
fail:
ERROR(f->config->cdev, "hidg_bind FAILED\n");
- if (hidg->req != NULL) {
- kfree(hidg->req->buf);
- if (hidg->in_ep != NULL)
- usb_ep_free_request(hidg->in_ep, hidg->req);
- }
+ if (hidg->req != NULL)
+ free_ep_req(hidg->in_ep, hidg->req);
return status;
}
@@ -809,11 +802,21 @@ end:
CONFIGFS_ATTR(f_hid_opts_, report_desc);
+static ssize_t f_hid_opts_dev_show(struct config_item *item, char *page)
+{
+ struct f_hid_opts *opts = to_f_hid_opts(item);
+
+ return sprintf(page, "%d:%d\n", major, opts->minor);
+}
+
+CONFIGFS_ATTR_RO(f_hid_opts_, dev);
+
static struct configfs_attribute *hid_attrs[] = {
&f_hid_opts_attr_subclass,
&f_hid_opts_attr_protocol,
&f_hid_opts_attr_report_length,
&f_hid_opts_attr_report_desc,
+ &f_hid_opts_attr_dev,
NULL,
};
@@ -910,8 +913,7 @@ static void hidg_unbind(struct usb_configuration *c, struct usb_function *f)
/* disable/free request and end point */
usb_ep_disable(hidg->in_ep);
- kfree(hidg->req->buf);
- usb_ep_free_request(hidg->in_ep, hidg->req);
+ free_ep_req(hidg->in_ep, hidg->req);
usb_free_all_descriptors(f);
}
diff --git a/drivers/usb/gadget/function/f_loopback.c b/drivers/usb/gadget/function/f_loopback.c
index 3a9f8f9c77bd..e70093835e14 100644
--- a/drivers/usb/gadget/function/f_loopback.c
+++ b/drivers/usb/gadget/function/f_loopback.c
@@ -308,9 +308,7 @@ static void disable_loopback(struct f_loopback *loop)
static inline struct usb_request *lb_alloc_ep_req(struct usb_ep *ep, int len)
{
- struct f_loopback *loop = ep->driver_data;
-
- return alloc_ep_req(ep, len, loop->buflen);
+ return alloc_ep_req(ep, len);
}
static int alloc_requests(struct usb_composite_dev *cdev,
@@ -333,7 +331,7 @@ static int alloc_requests(struct usb_composite_dev *cdev,
if (!in_req)
goto fail;
- out_req = lb_alloc_ep_req(loop->out_ep, 0);
+ out_req = lb_alloc_ep_req(loop->out_ep, loop->buflen);
if (!out_req)
goto fail_in;
@@ -593,13 +591,9 @@ DECLARE_USB_FUNCTION(Loopback, loopback_alloc_instance, loopback_alloc);
int __init lb_modinit(void)
{
- int ret;
-
- ret = usb_function_register(&Loopbackusb_func);
- if (ret)
- return ret;
- return ret;
+ return usb_function_register(&Loopbackusb_func);
}
+
void __exit lb_modexit(void)
{
usb_function_unregister(&Loopbackusb_func);
diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c
index 2505117e88e8..8f3659b65f53 100644
--- a/drivers/usb/gadget/function/f_mass_storage.c
+++ b/drivers/usb/gadget/function/f_mass_storage.c
@@ -311,11 +311,7 @@ struct fsg_common {
/* Gadget's private data. */
void *private_data;
- /*
- * Vendor (8 chars), product (16 chars), release (4
- * hexadecimal digits) and NUL byte
- */
- char inquiry_string[8 + 16 + 4 + 1];
+ char inquiry_string[INQUIRY_STRING_LEN];
struct kref ref;
};
@@ -1107,7 +1103,12 @@ static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh)
buf[5] = 0; /* No special options */
buf[6] = 0;
buf[7] = 0;
- memcpy(buf + 8, common->inquiry_string, sizeof common->inquiry_string);
+ if (curlun->inquiry_string[0])
+ memcpy(buf + 8, curlun->inquiry_string,
+ sizeof(curlun->inquiry_string));
+ else
+ memcpy(buf + 8, common->inquiry_string,
+ sizeof(common->inquiry_string));
return 36;
}
@@ -3209,12 +3210,27 @@ static ssize_t fsg_lun_opts_nofua_store(struct config_item *item,
CONFIGFS_ATTR(fsg_lun_opts_, nofua);
+static ssize_t fsg_lun_opts_inquiry_string_show(struct config_item *item,
+ char *page)
+{
+ return fsg_show_inquiry_string(to_fsg_lun_opts(item)->lun, page);
+}
+
+static ssize_t fsg_lun_opts_inquiry_string_store(struct config_item *item,
+ const char *page, size_t len)
+{
+ return fsg_store_inquiry_string(to_fsg_lun_opts(item)->lun, page, len);
+}
+
+CONFIGFS_ATTR(fsg_lun_opts_, inquiry_string);
+
static struct configfs_attribute *fsg_lun_attrs[] = {
&fsg_lun_opts_attr_file,
&fsg_lun_opts_attr_ro,
&fsg_lun_opts_attr_removable,
&fsg_lun_opts_attr_cdrom,
&fsg_lun_opts_attr_nofua,
+ &fsg_lun_opts_attr_inquiry_string,
NULL,
};
diff --git a/drivers/usb/gadget/function/f_mass_storage.h b/drivers/usb/gadget/function/f_mass_storage.h
index b6a9918eaefb..d3902313b8ac 100644
--- a/drivers/usb/gadget/function/f_mass_storage.h
+++ b/drivers/usb/gadget/function/f_mass_storage.h
@@ -100,6 +100,7 @@ struct fsg_lun_config {
char removable;
char cdrom;
char nofua;
+ char inquiry_string[INQUIRY_STRING_LEN];
};
struct fsg_config {
diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c
index 58fc199a18ec..a5719f271bf0 100644
--- a/drivers/usb/gadget/function/f_midi.c
+++ b/drivers/usb/gadget/function/f_midi.c
@@ -51,6 +51,19 @@ static const char f_midi_longname[] = "MIDI Gadget";
*/
#define MAX_PORTS 16
+/* MIDI message states */
+enum {
+ STATE_INITIAL = 0, /* pseudo state */
+ STATE_1PARAM,
+ STATE_2PARAM_1,
+ STATE_2PARAM_2,
+ STATE_SYSEX_0,
+ STATE_SYSEX_1,
+ STATE_SYSEX_2,
+ STATE_REAL_TIME,
+ STATE_FINISHED, /* pseudo state */
+};
+
/*
* This is a gadget, and the IN/OUT naming is from the host's perspective.
* USB -> OUT endpoint -> rawmidi
@@ -61,13 +74,6 @@ struct gmidi_in_port {
int active;
uint8_t cable;
uint8_t state;
-#define STATE_UNKNOWN 0
-#define STATE_1PARAM 1
-#define STATE_2PARAM_1 2
-#define STATE_2PARAM_2 3
-#define STATE_SYSEX_0 4
-#define STATE_SYSEX_1 5
-#define STATE_SYSEX_2 6
uint8_t data[2];
};
@@ -205,7 +211,7 @@ static struct usb_gadget_strings *midi_strings[] = {
static inline struct usb_request *midi_alloc_ep_req(struct usb_ep *ep,
unsigned length)
{
- return alloc_ep_req(ep, length, length);
+ return alloc_ep_req(ep, length);
}
static const uint8_t f_midi_cin_length[] = {
@@ -299,6 +305,19 @@ f_midi_complete(struct usb_ep *ep, struct usb_request *req)
}
}
+static void f_midi_drop_out_substreams(struct f_midi *midi)
+{
+ unsigned int i;
+
+ for (i = 0; i < midi->in_ports; i++) {
+ struct gmidi_in_port *port = midi->in_ports_array + i;
+ struct snd_rawmidi_substream *substream = port->substream;
+
+ if (port->active && substream)
+ snd_rawmidi_drop_output(substream);
+ }
+}
+
static int f_midi_start_ep(struct f_midi *midi,
struct usb_function *f,
struct usb_ep *ep)
@@ -360,9 +379,8 @@ static int f_midi_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
/* allocate a bunch of read buffers and queue them all at once. */
for (i = 0; i < midi->qlen && err == 0; i++) {
struct usb_request *req =
- midi_alloc_ep_req(midi->out_ep,
- max_t(unsigned, midi->buflen,
- bulk_out_desc.wMaxPacketSize));
+ midi_alloc_ep_req(midi->out_ep, midi->buflen);
+
if (req == NULL)
return -ENOMEM;
@@ -397,6 +415,8 @@ static void f_midi_disable(struct usb_function *f)
/* release IN requests */
while (kfifo_get(&midi->in_req_fifo, &req))
free_ep_req(midi->in_ep, req);
+
+ f_midi_drop_out_substreams(midi);
}
static int f_midi_snd_free(struct snd_device *device)
@@ -404,130 +424,166 @@ static int f_midi_snd_free(struct snd_device *device)
return 0;
}
-static void f_midi_transmit_packet(struct usb_request *req, uint8_t p0,
- uint8_t p1, uint8_t p2, uint8_t p3)
-{
- unsigned length = req->length;
- u8 *buf = (u8 *)req->buf + length;
-
- buf[0] = p0;
- buf[1] = p1;
- buf[2] = p2;
- buf[3] = p3;
- req->length = length + 4;
-}
-
/*
* Converts MIDI commands to USB MIDI packets.
*/
static void f_midi_transmit_byte(struct usb_request *req,
struct gmidi_in_port *port, uint8_t b)
{
- uint8_t p0 = port->cable << 4;
+ uint8_t p[4] = { port->cable << 4, 0, 0, 0 };
+ uint8_t next_state = STATE_INITIAL;
+
+ switch (b) {
+ case 0xf8 ... 0xff:
+ /* System Real-Time Messages */
+ p[0] |= 0x0f;
+ p[1] = b;
+ next_state = port->state;
+ port->state = STATE_REAL_TIME;
+ break;
- if (b >= 0xf8) {
- f_midi_transmit_packet(req, p0 | 0x0f, b, 0, 0);
- } else if (b >= 0xf0) {
+ case 0xf7:
+ /* End of SysEx */
+ switch (port->state) {
+ case STATE_SYSEX_0:
+ p[0] |= 0x05;
+ p[1] = 0xf7;
+ next_state = STATE_FINISHED;
+ break;
+ case STATE_SYSEX_1:
+ p[0] |= 0x06;
+ p[1] = port->data[0];
+ p[2] = 0xf7;
+ next_state = STATE_FINISHED;
+ break;
+ case STATE_SYSEX_2:
+ p[0] |= 0x07;
+ p[1] = port->data[0];
+ p[2] = port->data[1];
+ p[3] = 0xf7;
+ next_state = STATE_FINISHED;
+ break;
+ default:
+ /* Ignore byte */
+ next_state = port->state;
+ port->state = STATE_INITIAL;
+ }
+ break;
+
+ case 0xf0 ... 0xf6:
+ /* System Common Messages */
+ port->data[0] = port->data[1] = 0;
+ port->state = STATE_INITIAL;
switch (b) {
case 0xf0:
port->data[0] = b;
- port->state = STATE_SYSEX_1;
+ port->data[1] = 0;
+ next_state = STATE_SYSEX_1;
break;
case 0xf1:
case 0xf3:
port->data[0] = b;
- port->state = STATE_1PARAM;
+ next_state = STATE_1PARAM;
break;
case 0xf2:
port->data[0] = b;
- port->state = STATE_2PARAM_1;
+ next_state = STATE_2PARAM_1;
break;
case 0xf4:
case 0xf5:
- port->state = STATE_UNKNOWN;
+ next_state = STATE_INITIAL;
break;
case 0xf6:
- f_midi_transmit_packet(req, p0 | 0x05, 0xf6, 0, 0);
- port->state = STATE_UNKNOWN;
- break;
- case 0xf7:
- switch (port->state) {
- case STATE_SYSEX_0:
- f_midi_transmit_packet(req,
- p0 | 0x05, 0xf7, 0, 0);
- break;
- case STATE_SYSEX_1:
- f_midi_transmit_packet(req,
- p0 | 0x06, port->data[0], 0xf7, 0);
- break;
- case STATE_SYSEX_2:
- f_midi_transmit_packet(req,
- p0 | 0x07, port->data[0],
- port->data[1], 0xf7);
- break;
- }
- port->state = STATE_UNKNOWN;
+ p[0] |= 0x05;
+ p[1] = 0xf6;
+ next_state = STATE_FINISHED;
break;
}
- } else if (b >= 0x80) {
+ break;
+
+ case 0x80 ... 0xef:
+ /*
+ * Channel Voice Messages, Channel Mode Messages
+ * and Control Change Messages.
+ */
port->data[0] = b;
+ port->data[1] = 0;
+ port->state = STATE_INITIAL;
if (b >= 0xc0 && b <= 0xdf)
- port->state = STATE_1PARAM;
+ next_state = STATE_1PARAM;
else
- port->state = STATE_2PARAM_1;
- } else { /* b < 0x80 */
+ next_state = STATE_2PARAM_1;
+ break;
+
+ case 0x00 ... 0x7f:
+ /* Message parameters */
switch (port->state) {
case STATE_1PARAM:
- if (port->data[0] < 0xf0) {
- p0 |= port->data[0] >> 4;
- } else {
- p0 |= 0x02;
- port->state = STATE_UNKNOWN;
- }
- f_midi_transmit_packet(req, p0, port->data[0], b, 0);
+ if (port->data[0] < 0xf0)
+ p[0] |= port->data[0] >> 4;
+ else
+ p[0] |= 0x02;
+
+ p[1] = port->data[0];
+ p[2] = b;
+ /* This is to allow Running State Messages */
+ next_state = STATE_1PARAM;
break;
case STATE_2PARAM_1:
port->data[1] = b;
- port->state = STATE_2PARAM_2;
+ next_state = STATE_2PARAM_2;
break;
case STATE_2PARAM_2:
- if (port->data[0] < 0xf0) {
- p0 |= port->data[0] >> 4;
- port->state = STATE_2PARAM_1;
- } else {
- p0 |= 0x03;
- port->state = STATE_UNKNOWN;
- }
- f_midi_transmit_packet(req,
- p0, port->data[0], port->data[1], b);
+ if (port->data[0] < 0xf0)
+ p[0] |= port->data[0] >> 4;
+ else
+ p[0] |= 0x03;
+
+ p[1] = port->data[0];
+ p[2] = port->data[1];
+ p[3] = b;
+ /* This is to allow Running State Messages */
+ next_state = STATE_2PARAM_1;
break;
case STATE_SYSEX_0:
port->data[0] = b;
- port->state = STATE_SYSEX_1;
+ next_state = STATE_SYSEX_1;
break;
case STATE_SYSEX_1:
port->data[1] = b;
- port->state = STATE_SYSEX_2;
+ next_state = STATE_SYSEX_2;
break;
case STATE_SYSEX_2:
- f_midi_transmit_packet(req,
- p0 | 0x04, port->data[0], port->data[1], b);
- port->state = STATE_SYSEX_0;
+ p[0] |= 0x04;
+ p[1] = port->data[0];
+ p[2] = port->data[1];
+ p[3] = b;
+ next_state = STATE_SYSEX_0;
break;
}
+ break;
}
-}
-static void f_midi_drop_out_substreams(struct f_midi *midi)
-{
- unsigned int i;
+ /* States where we have to write into the USB request */
+ if (next_state == STATE_FINISHED ||
+ port->state == STATE_SYSEX_2 ||
+ port->state == STATE_1PARAM ||
+ port->state == STATE_2PARAM_2 ||
+ port->state == STATE_REAL_TIME) {
- for (i = 0; i < midi->in_ports; i++) {
- struct gmidi_in_port *port = midi->in_ports_array + i;
- struct snd_rawmidi_substream *substream = port->substream;
- if (port->active && substream)
- snd_rawmidi_drop_output(substream);
+ unsigned int length = req->length;
+ u8 *buf = (u8 *)req->buf + length;
+
+ memcpy(buf, p, sizeof(p));
+ req->length = length + sizeof(p);
+
+ if (next_state == STATE_FINISHED) {
+ next_state = STATE_INITIAL;
+ port->data[0] = port->data[1] = 0;
+ }
}
+
+ port->state = next_state;
}
static int f_midi_do_transmit(struct f_midi *midi, struct usb_ep *ep)
@@ -642,7 +698,7 @@ static int f_midi_in_open(struct snd_rawmidi_substream *substream)
VDBG(midi, "%s()\n", __func__);
port = midi->in_ports_array + substream->number;
port->substream = substream;
- port->state = STATE_UNKNOWN;
+ port->state = STATE_INITIAL;
return 0;
}
@@ -1123,7 +1179,7 @@ static struct usb_function_instance *f_midi_alloc_inst(void)
opts->func_inst.free_func_inst = f_midi_free_inst;
opts->index = SNDRV_DEFAULT_IDX1;
opts->id = SNDRV_DEFAULT_STR1;
- opts->buflen = 256;
+ opts->buflen = 512;
opts->qlen = 32;
opts->in_ports = 1;
opts->out_ports = 1;
diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c
index 97f0a9bc84df..639603722709 100644
--- a/drivers/usb/gadget/function/f_ncm.c
+++ b/drivers/usb/gadget/function/f_ncm.c
@@ -90,7 +90,9 @@ static inline struct f_ncm *func_to_ncm(struct usb_function *f)
/* peak (theoretical) bulk transfer rate in bits-per-second */
static inline unsigned ncm_bitrate(struct usb_gadget *g)
{
- if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+ if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
+ return 13 * 1024 * 8 * 1000 * 8;
+ else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
return 13 * 512 * 8 * 1000 * 8;
else
return 19 * 64 * 1 * 1000 * 8;
@@ -333,6 +335,76 @@ static struct usb_descriptor_header *ncm_hs_function[] = {
NULL,
};
+
+/* super speed support: */
+
+static struct usb_endpoint_descriptor ss_ncm_notify_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize = cpu_to_le16(NCM_STATUS_BYTECOUNT),
+ .bInterval = USB_MS_TO_HS_INTERVAL(NCM_STATUS_INTERVAL_MS)
+};
+
+static struct usb_ss_ep_comp_descriptor ss_ncm_notify_comp_desc = {
+ .bLength = sizeof(ss_ncm_notify_comp_desc),
+ .bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
+
+ /* the following 3 values can be tweaked if necessary */
+ /* .bMaxBurst = 0, */
+ /* .bmAttributes = 0, */
+ .wBytesPerInterval = cpu_to_le16(NCM_STATUS_BYTECOUNT),
+};
+
+static struct usb_endpoint_descriptor ss_ncm_in_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = cpu_to_le16(1024),
+};
+
+static struct usb_endpoint_descriptor ss_ncm_out_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor ss_ncm_bulk_comp_desc = {
+ .bLength = sizeof(ss_ncm_bulk_comp_desc),
+ .bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
+
+ /* the following 2 values can be tweaked if necessary */
+ /* .bMaxBurst = 0, */
+ /* .bmAttributes = 0, */
+};
+
+static struct usb_descriptor_header *ncm_ss_function[] = {
+ (struct usb_descriptor_header *) &ncm_iad_desc,
+ /* CDC NCM control descriptors */
+ (struct usb_descriptor_header *) &ncm_control_intf,
+ (struct usb_descriptor_header *) &ncm_header_desc,
+ (struct usb_descriptor_header *) &ncm_union_desc,
+ (struct usb_descriptor_header *) &ecm_desc,
+ (struct usb_descriptor_header *) &ncm_desc,
+ (struct usb_descriptor_header *) &ss_ncm_notify_desc,
+ (struct usb_descriptor_header *) &ss_ncm_notify_comp_desc,
+ /* data interface, altsettings 0 and 1 */
+ (struct usb_descriptor_header *) &ncm_data_nop_intf,
+ (struct usb_descriptor_header *) &ncm_data_intf,
+ (struct usb_descriptor_header *) &ss_ncm_in_desc,
+ (struct usb_descriptor_header *) &ss_ncm_bulk_comp_desc,
+ (struct usb_descriptor_header *) &ss_ncm_out_desc,
+ (struct usb_descriptor_header *) &ss_ncm_bulk_comp_desc,
+ NULL,
+};
+
/* string descriptors: */
#define STRING_CTRL_IDX 0
@@ -852,6 +924,8 @@ static int ncm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
*/
ncm->port.is_zlp_ok =
gadget_is_zlp_supported(cdev->gadget);
+ ncm->port.no_skb_reserve =
+ gadget_avoids_skb_reserve(cdev->gadget);
ncm->port.cdc_filter = DEFAULT_FILTER;
DBG(cdev, "activate ncm\n");
net = gether_connect(&ncm->port);
@@ -1431,8 +1505,13 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f)
hs_ncm_notify_desc.bEndpointAddress =
fs_ncm_notify_desc.bEndpointAddress;
+ ss_ncm_in_desc.bEndpointAddress = fs_ncm_in_desc.bEndpointAddress;
+ ss_ncm_out_desc.bEndpointAddress = fs_ncm_out_desc.bEndpointAddress;
+ ss_ncm_notify_desc.bEndpointAddress =
+ fs_ncm_notify_desc.bEndpointAddress;
+
status = usb_assign_descriptors(f, ncm_fs_function, ncm_hs_function,
- NULL, NULL);
+ ncm_ss_function, NULL);
if (status)
goto fail;
@@ -1450,6 +1529,7 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f)
ncm->task_timer.function = ncm_tx_timeout;
DBG(cdev, "CDC Network: %s speed IN/%s OUT/%s NOTIFY/%s\n",
+ gadget_is_superspeed(c->cdev->gadget) ? "super" :
gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
ncm->port.in_ep->name, ncm->port.out_ep->name,
ncm->notify->name);
diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
index 64706a789580..0de36cda6e41 100644
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -889,13 +889,17 @@ static void printer_soft_reset(struct printer_dev *dev)
/*-------------------------------------------------------------------------*/
static bool gprinter_req_match(struct usb_function *f,
- const struct usb_ctrlrequest *ctrl)
+ const struct usb_ctrlrequest *ctrl,
+ bool config0)
{
struct printer_dev *dev = func_to_printer(f);
u16 w_index = le16_to_cpu(ctrl->wIndex);
u16 w_value = le16_to_cpu(ctrl->wValue);
u16 w_length = le16_to_cpu(ctrl->wLength);
+ if (config0)
+ return false;
+
if ((ctrl->bRequestType & USB_RECIP_MASK) != USB_RECIP_INTERFACE ||
(ctrl->bRequestType & USB_TYPE_MASK) != USB_TYPE_CLASS)
return false;
diff --git a/drivers/usb/gadget/function/f_sourcesink.c b/drivers/usb/gadget/function/f_sourcesink.c
index df0189ddfdd5..8784fa12ea2c 100644
--- a/drivers/usb/gadget/function/f_sourcesink.c
+++ b/drivers/usb/gadget/function/f_sourcesink.c
@@ -293,9 +293,7 @@ static struct usb_gadget_strings *sourcesink_strings[] = {
static inline struct usb_request *ss_alloc_ep_req(struct usb_ep *ep, int len)
{
- struct f_sourcesink *ss = ep->driver_data;
-
- return alloc_ep_req(ep, len, ss->buflen);
+ return alloc_ep_req(ep, len);
}
static void disable_ep(struct usb_composite_dev *cdev, struct usb_ep *ep)
@@ -606,7 +604,7 @@ static int source_sink_start_ep(struct f_sourcesink *ss, bool is_in,
} else {
ep = is_in ? ss->in_ep : ss->out_ep;
qlen = ss->bulk_qlen;
- size = 0;
+ size = ss->buflen;
}
for (i = 0; i < qlen; i++) {
diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c
index 29b41b5dee04..27ed51b5082f 100644
--- a/drivers/usb/gadget/function/f_uvc.c
+++ b/drivers/usb/gadget/function/f_uvc.c
@@ -258,6 +258,13 @@ uvc_function_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
memcpy(&uvc_event->req, ctrl, sizeof(uvc_event->req));
v4l2_event_queue(&uvc->vdev, &v4l2_event);
+ /* Pass additional setup data to userspace */
+ if (uvc->event_setup_out && uvc->event_length) {
+ uvc->control_req->length = uvc->event_length;
+ return usb_ep_queue(uvc->func.config->cdev->gadget->ep0,
+ uvc->control_req, GFP_ATOMIC);
+ }
+
return 0;
}
diff --git a/drivers/usb/gadget/function/storage_common.c b/drivers/usb/gadget/function/storage_common.c
index 990df221c629..8fbf6861690d 100644
--- a/drivers/usb/gadget/function/storage_common.c
+++ b/drivers/usb/gadget/function/storage_common.c
@@ -369,6 +369,12 @@ ssize_t fsg_show_removable(struct fsg_lun *curlun, char *buf)
}
EXPORT_SYMBOL_GPL(fsg_show_removable);
+ssize_t fsg_show_inquiry_string(struct fsg_lun *curlun, char *buf)
+{
+ return sprintf(buf, "%s\n", curlun->inquiry_string);
+}
+EXPORT_SYMBOL_GPL(fsg_show_inquiry_string);
+
/*
* The caller must hold fsg->filesem for reading when calling this function.
*/
@@ -499,4 +505,22 @@ ssize_t fsg_store_removable(struct fsg_lun *curlun, const char *buf,
}
EXPORT_SYMBOL_GPL(fsg_store_removable);
+ssize_t fsg_store_inquiry_string(struct fsg_lun *curlun, const char *buf,
+ size_t count)
+{
+ const size_t len = min(count, sizeof(curlun->inquiry_string));
+
+ if (len == 0 || buf[0] == '\n') {
+ curlun->inquiry_string[0] = 0;
+ } else {
+ snprintf(curlun->inquiry_string,
+ sizeof(curlun->inquiry_string), "%-28s", buf);
+ if (curlun->inquiry_string[len-1] == '\n')
+ curlun->inquiry_string[len-1] = ' ';
+ }
+
+ return count;
+}
+EXPORT_SYMBOL_GPL(fsg_store_inquiry_string);
+
MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/function/storage_common.h b/drivers/usb/gadget/function/storage_common.h
index c3544e61da66..e69848994cb4 100644
--- a/drivers/usb/gadget/function/storage_common.h
+++ b/drivers/usb/gadget/function/storage_common.h
@@ -88,6 +88,12 @@ do { \
#define ASC(x) ((u8) ((x) >> 8))
#define ASCQ(x) ((u8) (x))
+/*
+ * Vendor (8 chars), product (16 chars), release (4 hexadecimal digits) and NUL
+ * byte
+ */
+#define INQUIRY_STRING_LEN ((size_t) (8 + 16 + 4 + 1))
+
struct fsg_lun {
struct file *filp;
loff_t file_length;
@@ -112,6 +118,7 @@ struct fsg_lun {
struct device dev;
const char *name; /* "lun.name" */
const char **name_pfx; /* "function.name" */
+ char inquiry_string[INQUIRY_STRING_LEN];
};
static inline bool fsg_lun_is_open(struct fsg_lun *curlun)
@@ -210,6 +217,7 @@ ssize_t fsg_show_ro(struct fsg_lun *curlun, char *buf);
ssize_t fsg_show_nofua(struct fsg_lun *curlun, char *buf);
ssize_t fsg_show_file(struct fsg_lun *curlun, struct rw_semaphore *filesem,
char *buf);
+ssize_t fsg_show_inquiry_string(struct fsg_lun *curlun, char *buf);
ssize_t fsg_show_cdrom(struct fsg_lun *curlun, char *buf);
ssize_t fsg_show_removable(struct fsg_lun *curlun, char *buf);
ssize_t fsg_store_ro(struct fsg_lun *curlun, struct rw_semaphore *filesem,
@@ -221,5 +229,7 @@ ssize_t fsg_store_cdrom(struct fsg_lun *curlun, struct rw_semaphore *filesem,
const char *buf, size_t count);
ssize_t fsg_store_removable(struct fsg_lun *curlun, const char *buf,
size_t count);
+ssize_t fsg_store_inquiry_string(struct fsg_lun *curlun, const char *buf,
+ size_t count);
#endif /* USB_STORAGE_COMMON_H */
diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index 5f562c1ec795..9c8c9ed1dc9e 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -82,6 +82,7 @@ struct eth_dev {
#define WORK_RX_MEMORY 0
bool zlp;
+ bool no_skb_reserve;
u8 host_mac[ETH_ALEN];
u8 dev_mac[ETH_ALEN];
};
@@ -233,7 +234,8 @@ rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags)
* but on at least one, checksumming fails otherwise. Note:
* RNDIS headers involve variable numbers of LE32 values.
*/
- skb_reserve(skb, NET_IP_ALIGN);
+ if (likely(!dev->no_skb_reserve))
+ skb_reserve(skb, NET_IP_ALIGN);
req->buf = skb->data;
req->length = size;
@@ -569,7 +571,8 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
req->complete = tx_complete;
/* NCM requires no zlp if transfer is dwNtbInMaxSize */
- if (dev->port_usb->is_fixed &&
+ if (dev->port_usb &&
+ dev->port_usb->is_fixed &&
length == dev->port_usb->fixed_in_len &&
(length % in->maxpacket) == 0)
req->zero = 0;
@@ -1063,6 +1066,7 @@ struct net_device *gether_connect(struct gether *link)
if (result == 0) {
dev->zlp = link->is_zlp_ok;
+ dev->no_skb_reserve = link->no_skb_reserve;
DBG(dev, "qlen %d\n", qlen(dev->gadget, dev->qmult));
dev->header_len = link->header_len;
diff --git a/drivers/usb/gadget/function/u_ether.h b/drivers/usb/gadget/function/u_ether.h
index c77145bd6b5b..81d94a7ae4b4 100644
--- a/drivers/usb/gadget/function/u_ether.h
+++ b/drivers/usb/gadget/function/u_ether.h
@@ -64,6 +64,7 @@ struct gether {
struct usb_ep *out_ep;
bool is_zlp_ok;
+ bool no_skb_reserve;
u16 cdc_filter;
diff --git a/drivers/usb/gadget/legacy/gmidi.c b/drivers/usb/gadget/legacy/gmidi.c
index fc2ac150f5ff..0bf39c3ccdb1 100644
--- a/drivers/usb/gadget/legacy/gmidi.c
+++ b/drivers/usb/gadget/legacy/gmidi.c
@@ -47,7 +47,7 @@ static char *id = SNDRV_DEFAULT_STR1;
module_param(id, charp, S_IRUGO);
MODULE_PARM_DESC(id, "ID string for the USB MIDI Gadget adapter.");
-static unsigned int buflen = 256;
+static unsigned int buflen = 512;
module_param(buflen, uint, S_IRUGO);
MODULE_PARM_DESC(buflen, "MIDI buffer length");
diff --git a/drivers/usb/gadget/u_f.c b/drivers/usb/gadget/u_f.c
index 4bc7eea8bfc8..18839732c840 100644
--- a/drivers/usb/gadget/u_f.c
+++ b/drivers/usb/gadget/u_f.c
@@ -12,14 +12,16 @@
*/
#include "u_f.h"
+#include <linux/usb/ch9.h>
-struct usb_request *alloc_ep_req(struct usb_ep *ep, int len, int default_len)
+struct usb_request *alloc_ep_req(struct usb_ep *ep, size_t len)
{
struct usb_request *req;
req = usb_ep_alloc_request(ep, GFP_ATOMIC);
if (req) {
- req->length = len ?: default_len;
+ req->length = usb_endpoint_dir_out(ep->desc) ?
+ usb_ep_align(ep, len) : len;
req->buf = kmalloc(req->length, GFP_ATOMIC);
if (!req->buf) {
usb_ep_free_request(ep, req);
diff --git a/drivers/usb/gadget/u_f.h b/drivers/usb/gadget/u_f.h
index 4247cc098a89..7d53a4773d1a 100644
--- a/drivers/usb/gadget/u_f.h
+++ b/drivers/usb/gadget/u_f.h
@@ -47,8 +47,21 @@
struct usb_ep;
struct usb_request;
-/* Requests allocated via alloc_ep_req() must be freed by free_ep_req(). */
-struct usb_request *alloc_ep_req(struct usb_ep *ep, int len, int default_len);
+/**
+ * alloc_ep_req - returns a usb_request allocated by the gadget driver and
+ * allocates the request's buffer.
+ *
+ * @ep: the endpoint to allocate a usb_request
+ * @len: usb_requests's buffer suggested size
+ *
+ * In case @ep direction is OUT, the @len will be aligned to ep's
+ * wMaxPacketSize. In order to avoid memory leaks or drops, *always* use
+ * usb_requests's length (req->length) to refer to the allocated buffer size.
+ * Requests allocated via alloc_ep_req() *must* be freed by free_ep_req().
+ */
+struct usb_request *alloc_ep_req(struct usb_ep *ep, size_t len);
+
+/* Frees a usb_request previously allocated by alloc_ep_req() */
static inline void free_ep_req(struct usb_ep *ep, struct usb_request *req)
{
kfree(req->buf);
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index 40c04bb25f2f..9483489080f6 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -107,10 +107,8 @@ int usb_ep_enable(struct usb_ep *ep)
goto out;
ret = ep->ops->enable(ep, ep->desc);
- if (ret) {
- ret = ret;
+ if (ret)
goto out;
- }
ep->enabled = true;
diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.c b/drivers/usb/gadget/udc/fsl_qe_udc.c
index 8bb011ea78f7..4fff51b8a18e 100644
--- a/drivers/usb/gadget/udc/fsl_qe_udc.c
+++ b/drivers/usb/gadget/udc/fsl_qe_udc.c
@@ -421,10 +421,8 @@ static int qe_ep_rxbd_update(struct qe_ep *ep)
bd = ep->rxbase;
ep->rxframe = kmalloc(sizeof(*ep->rxframe), GFP_ATOMIC);
- if (ep->rxframe == NULL) {
- dev_err(ep->udc->dev, "malloc rxframe failed\n");
+ if (!ep->rxframe)
return -ENOMEM;
- }
qe_frame_init(ep->rxframe);
@@ -435,9 +433,7 @@ static int qe_ep_rxbd_update(struct qe_ep *ep)
size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) * (bdring_len + 1);
ep->rxbuffer = kzalloc(size, GFP_ATOMIC);
- if (ep->rxbuffer == NULL) {
- dev_err(ep->udc->dev, "malloc rxbuffer failed,size=%d\n",
- size);
+ if (!ep->rxbuffer) {
kfree(ep->rxframe);
return -ENOMEM;
}
@@ -668,10 +664,8 @@ static int qe_ep_init(struct qe_udc *udc,
if ((ep->tm == USBP_TM_CTL) || (ep->dir == USB_DIR_IN)) {
ep->txframe = kmalloc(sizeof(*ep->txframe), GFP_ATOMIC);
- if (ep->txframe == NULL) {
- dev_err(udc->dev, "malloc txframe failed\n");
+ if (!ep->txframe)
goto en_done2;
- }
qe_frame_init(ep->txframe);
}
@@ -2344,10 +2338,8 @@ static struct qe_udc *qe_udc_config(struct platform_device *ofdev)
u32 offset;
udc = kzalloc(sizeof(*udc), GFP_KERNEL);
- if (udc == NULL) {
- dev_err(&ofdev->dev, "malloc udc failed\n");
+ if (!udc)
goto cleanup;
- }
udc->dev = &ofdev->dev;
diff --git a/drivers/usb/gadget/udc/goku_udc.c b/drivers/usb/gadget/udc/goku_udc.c
index d2205d9e0c8b..5107987bd353 100644
--- a/drivers/usb/gadget/udc/goku_udc.c
+++ b/drivers/usb/gadget/udc/goku_udc.c
@@ -1767,8 +1767,7 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
/* alloc, and start init */
dev = kzalloc (sizeof *dev, GFP_KERNEL);
- if (dev == NULL){
- pr_debug("enomem %s\n", pci_name(pdev));
+ if (!dev) {
retval = -ENOMEM;
goto err;
}
@@ -1839,6 +1838,8 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
err:
if (dev)
goku_remove (pdev);
+ /* gadget_release is not registered yet, kfree explicitly */
+ kfree(dev);
return retval;
}
diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index 614ab951a4ae..61c938c36d88 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -589,7 +589,7 @@ static void net2280_free_request(struct usb_ep *_ep, struct usb_request *_req)
ep = container_of(_ep, struct net2280_ep, ep);
if (!_ep || !_req) {
- dev_err(&ep->dev->pdev->dev, "%s: Inavlid ep=%p or req=%p\n",
+ dev_err(&ep->dev->pdev->dev, "%s: Invalid ep=%p or req=%p\n",
__func__, _ep, _req);
return;
}
@@ -1137,8 +1137,10 @@ dma_done(struct net2280_ep *ep, struct net2280_request *req, u32 dmacount,
done(ep, req, status);
}
-static void scan_dma_completions(struct net2280_ep *ep)
+static int scan_dma_completions(struct net2280_ep *ep)
{
+ int num_completed = 0;
+
/* only look at descriptors that were "naturally" retired,
* so fifo and list head state won't matter
*/
@@ -1166,6 +1168,7 @@ static void scan_dma_completions(struct net2280_ep *ep)
break;
/* single transfer mode */
dma_done(ep, req, tmp, 0);
+ num_completed++;
break;
} else if (!ep->is_in &&
(req->req.length % ep->ep.maxpacket) &&
@@ -1194,7 +1197,10 @@ static void scan_dma_completions(struct net2280_ep *ep)
}
}
dma_done(ep, req, tmp, 0);
+ num_completed++;
}
+
+ return num_completed;
}
static void restart_dma(struct net2280_ep *ep)
@@ -1567,6 +1573,44 @@ static struct usb_ep *net2280_match_ep(struct usb_gadget *_gadget,
return ep;
}
+ /* USB3380: Only first four endpoints have DMA channels. Allocate
+ * slower interrupt endpoints from PIO hw endpoints, to allow bulk/isoc
+ * endpoints use DMA hw endpoints.
+ */
+ if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_INT &&
+ usb_endpoint_dir_in(desc)) {
+ ep = gadget_find_ep_by_name(_gadget, "ep2in");
+ if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+ return ep;
+ ep = gadget_find_ep_by_name(_gadget, "ep4in");
+ if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+ return ep;
+ } else if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_INT &&
+ !usb_endpoint_dir_in(desc)) {
+ ep = gadget_find_ep_by_name(_gadget, "ep1out");
+ if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+ return ep;
+ ep = gadget_find_ep_by_name(_gadget, "ep3out");
+ if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+ return ep;
+ } else if (usb_endpoint_type(desc) != USB_ENDPOINT_XFER_BULK &&
+ usb_endpoint_dir_in(desc)) {
+ ep = gadget_find_ep_by_name(_gadget, "ep1in");
+ if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+ return ep;
+ ep = gadget_find_ep_by_name(_gadget, "ep3in");
+ if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+ return ep;
+ } else if (usb_endpoint_type(desc) != USB_ENDPOINT_XFER_BULK &&
+ !usb_endpoint_dir_in(desc)) {
+ ep = gadget_find_ep_by_name(_gadget, "ep2out");
+ if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+ return ep;
+ ep = gadget_find_ep_by_name(_gadget, "ep4out");
+ if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+ return ep;
+ }
+
/* USB3380: use same address for usb and hardware endpoints */
snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc),
usb_endpoint_dir_in(desc) ? "in" : "out");
@@ -2547,8 +2591,11 @@ static void handle_ep_small(struct net2280_ep *ep)
/* manual DMA queue advance after short OUT */
if (likely(ep->dma)) {
if (t & BIT(SHORT_PACKET_TRANSFERRED_INTERRUPT)) {
- u32 count;
+ struct net2280_request *stuck_req = NULL;
int stopped = ep->stopped;
+ int num_completed;
+ int stuck = 0;
+ u32 count;
/* TRANSFERRED works around OUT_DONE erratum 0112.
* we expect (N <= maxpacket) bytes; host wrote M.
@@ -2560,7 +2607,7 @@ static void handle_ep_small(struct net2280_ep *ep)
/* any preceding dma transfers must finish.
* dma handles (M >= N), may empty the queue
*/
- scan_dma_completions(ep);
+ num_completed = scan_dma_completions(ep);
if (unlikely(list_empty(&ep->queue) ||
ep->out_overflow)) {
req = NULL;
@@ -2580,6 +2627,31 @@ static void handle_ep_small(struct net2280_ep *ep)
req = NULL;
break;
}
+
+ /* Escape loop if no dma transfers completed
+ * after few retries.
+ */
+ if (num_completed == 0) {
+ if (stuck_req == req &&
+ readl(&ep->dma->dmadesc) !=
+ req->td_dma && stuck++ > 5) {
+ count = readl(
+ &ep->dma->dmacount);
+ count &= DMA_BYTE_COUNT_MASK;
+ req = NULL;
+ ep_dbg(ep->dev, "%s escape stuck %d, count %u\n",
+ ep->ep.name, stuck,
+ count);
+ break;
+ } else if (stuck_req != req) {
+ stuck_req = req;
+ stuck = 0;
+ }
+ } else {
+ stuck_req = NULL;
+ stuck = 0;
+ }
+
udelay(1);
}
diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index 9b7d39484ed3..a8709f9e5648 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -2875,7 +2875,7 @@ bad_on_1710:
xceiv = NULL;
/* "udc" is now valid */
pullup_disable(udc);
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_OHCI_HCD)
udc->gadget.is_otg = (config->otg != 0);
#endif
diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c
index ad140aa00132..7fa60f5b7ae4 100644
--- a/drivers/usb/gadget/udc/pxa27x_udc.c
+++ b/drivers/usb/gadget/udc/pxa27x_udc.c
@@ -33,6 +33,7 @@
#include <linux/usb.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+#include <linux/usb/phy.h>
#include "pxa27x_udc.h"
@@ -1655,6 +1656,37 @@ static int pxa_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
return -EOPNOTSUPP;
}
+/**
+ * pxa_udc_phy_event - Called by phy upon VBus event
+ * @nb: notifier block
+ * @action: phy action, is vbus connect or disconnect
+ * @data: the usb_gadget structure in pxa_udc
+ *
+ * Called by the USB Phy when a cable connect or disconnect is sensed.
+ *
+ * Returns 0
+ */
+static int pxa_udc_phy_event(struct notifier_block *nb, unsigned long action,
+ void *data)
+{
+ struct usb_gadget *gadget = data;
+
+ switch (action) {
+ case USB_EVENT_VBUS:
+ usb_gadget_vbus_connect(gadget);
+ return NOTIFY_OK;
+ case USB_EVENT_NONE:
+ usb_gadget_vbus_disconnect(gadget);
+ return NOTIFY_OK;
+ default:
+ return NOTIFY_DONE;
+ }
+}
+
+static struct notifier_block pxa27x_udc_phy = {
+ .notifier_call = pxa_udc_phy_event,
+};
+
static int pxa27x_udc_start(struct usb_gadget *g,
struct usb_gadget_driver *driver);
static int pxa27x_udc_stop(struct usb_gadget *g);
@@ -2432,7 +2464,14 @@ static int pxa_udc_probe(struct platform_device *pdev)
return udc->irq;
udc->dev = &pdev->dev;
- udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
+ if (of_have_populated_dt()) {
+ udc->transceiver =
+ devm_usb_get_phy_by_phandle(udc->dev, "phys", 0);
+ if (IS_ERR(udc->transceiver))
+ return PTR_ERR(udc->transceiver);
+ } else {
+ udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
+ }
if (IS_ERR(udc->gpiod)) {
dev_err(&pdev->dev, "Couldn't find or request D+ gpio : %ld\n",
@@ -2465,14 +2504,20 @@ static int pxa_udc_probe(struct platform_device *pdev)
goto err;
}
+ if (!IS_ERR_OR_NULL(udc->transceiver))
+ usb_register_notifier(udc->transceiver, &pxa27x_udc_phy);
retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
if (retval)
- goto err;
+ goto err_add_gadget;
pxa_init_debugfs(udc);
if (should_enable_udc(udc))
udc_enable(udc);
return 0;
+
+err_add_gadget:
+ if (!IS_ERR_OR_NULL(udc->transceiver))
+ usb_unregister_notifier(udc->transceiver, &pxa27x_udc_phy);
err:
clk_unprepare(udc->clk);
return retval;
@@ -2489,6 +2534,8 @@ static int pxa_udc_remove(struct platform_device *_dev)
usb_del_gadget_udc(&udc->gadget);
pxa_cleanup_debugfs(udc);
+ if (!IS_ERR_OR_NULL(udc->transceiver))
+ usb_unregister_notifier(udc->transceiver, &pxa27x_udc_phy);
usb_put_phy(udc->transceiver);
udc->transceiver = NULL;
diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c
index f8bf290f1894..588e2531b8b8 100644
--- a/drivers/usb/gadget/udc/udc-xilinx.c
+++ b/drivers/usb/gadget/udc/udc-xilinx.c
@@ -973,10 +973,8 @@ static struct usb_request *xudc_ep_alloc_request(struct usb_ep *_ep,
udc = ep->udc;
req = kzalloc(sizeof(*req), gfp_flags);
- if (!req) {
- dev_err(udc->dev, "%s:not enough memory", __func__);
+ if (!req)
return NULL;
- }
req->ep = ep;
INIT_LIST_HEAD(&req->queue);
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 2e710a4cca52..0b80cee30da4 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -472,7 +472,7 @@ config USB_OHCI_HCD_AT91
config USB_OHCI_HCD_OMAP3
tristate "OHCI support for OMAP3 and later chips"
- depends on (ARCH_OMAP3 || ARCH_OMAP4)
+ depends on (ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5)
default y
---help---
Enables support for the on-chip OHCI controller on
diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c
index 172ef17911aa..5f425c89faf1 100644
--- a/drivers/usb/host/bcma-hcd.c
+++ b/drivers/usb/host/bcma-hcd.c
@@ -27,6 +27,7 @@
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
#include <linux/usb/ehci_pdriver.h>
#include <linux/usb/ohci_pdriver.h>
@@ -34,6 +35,9 @@ MODULE_AUTHOR("Hauke Mehrtens");
MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
MODULE_LICENSE("GPL");
+/* See BCMA_CLKCTLST_EXTRESREQ and BCMA_CLKCTLST_EXTRESST */
+#define USB_BCMA_CLKCTLST_USB_CLK_REQ 0x00000100
+
struct bcma_hcd_device {
struct bcma_device *core;
struct platform_device *ehci_dev;
@@ -165,44 +169,80 @@ static void bcma_hcd_init_chip_mips(struct bcma_device *dev)
}
}
-static void bcma_hcd_init_chip_arm_phy(struct bcma_device *dev)
+/**
+ * bcma_hcd_usb20_old_arm_init - Initialize old USB 2.0 controller on ARM
+ *
+ * Old USB 2.0 core is identified as BCMA_CORE_USB20_HOST and was introduced
+ * long before Northstar devices. It seems some cheaper chipsets like BCM53573
+ * still use it.
+ * Initialization of this old core differs between MIPS and ARM.
+ */
+static int bcma_hcd_usb20_old_arm_init(struct bcma_hcd_device *usb_dev)
{
- struct bcma_device *arm_core;
- void __iomem *dmu;
-
- arm_core = bcma_find_core(dev->bus, BCMA_CORE_ARMCA9);
- if (!arm_core) {
- dev_err(&dev->dev, "can not find ARM Cortex A9 ihost core\n");
- return;
+ struct bcma_device *core = usb_dev->core;
+ struct device *dev = &core->dev;
+ struct bcma_device *pmu_core;
+
+ usleep_range(10000, 20000);
+ if (core->id.rev < 5)
+ return 0;
+
+ pmu_core = bcma_find_core(core->bus, BCMA_CORE_PMU);
+ if (!pmu_core) {
+ dev_err(dev, "Could not find PMU core\n");
+ return -ENOENT;
}
- dmu = ioremap_nocache(arm_core->addr_s[0], 0x1000);
- if (!dmu) {
- dev_err(&dev->dev, "can not map ARM Cortex A9 ihost core\n");
- return;
- }
-
- /* Unlock DMU PLL settings */
- iowrite32(0x0000ea68, dmu + 0x180);
-
- /* Write USB 2.0 PLL control setting */
- iowrite32(0x00dd10c3, dmu + 0x164);
+ /* Take USB core out of reset */
+ bcma_awrite32(core, BCMA_IOCTL, BCMA_IOCTL_CLK | BCMA_IOCTL_FGC);
+ usleep_range(100, 200);
+ bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
+ usleep_range(100, 200);
+ bcma_awrite32(core, BCMA_RESET_CTL, 0);
+ usleep_range(100, 200);
+ bcma_awrite32(core, BCMA_IOCTL, BCMA_IOCTL_CLK);
+ usleep_range(100, 200);
+
+ /* Enable Misc PLL */
+ bcma_write32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT |
+ BCMA_CLKCTLST_HQCLKREQ |
+ USB_BCMA_CLKCTLST_USB_CLK_REQ);
+ usleep_range(100, 200);
+
+ bcma_write32(core, 0x510, 0xc7f85000);
+ bcma_write32(core, 0x510, 0xc7f85003);
+ usleep_range(300, 600);
+
+ /* Program USB PHY PLL parameters */
+ bcma_write32(pmu_core, BCMA_CC_PMU_PLLCTL_ADDR, 0x6);
+ bcma_write32(pmu_core, BCMA_CC_PMU_PLLCTL_DATA, 0x005360c1);
+ usleep_range(100, 200);
+ bcma_write32(pmu_core, BCMA_CC_PMU_PLLCTL_ADDR, 0x7);
+ bcma_write32(pmu_core, BCMA_CC_PMU_PLLCTL_DATA, 0x0);
+ usleep_range(100, 200);
+ bcma_set32(pmu_core, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD);
+ usleep_range(100, 200);
+
+ bcma_write32(core, 0x510, 0x7f8d007);
+ udelay(1000);
+
+ /* Take controller out of reset */
+ bcma_write32(core, 0x200, 0x4ff);
+ usleep_range(25, 50);
+ bcma_write32(core, 0x200, 0x6ff);
+ usleep_range(25, 50);
+ bcma_write32(core, 0x200, 0x7ff);
+ usleep_range(25, 50);
+
+ of_platform_default_populate(dev->of_node, NULL, dev);
- /* Lock DMU PLL settings */
- iowrite32(0x00000000, dmu + 0x180);
-
- iounmap(dmu);
+ return 0;
}
-static void bcma_hcd_init_chip_arm_hc(struct bcma_device *dev)
+static void bcma_hcd_usb20_ns_init_hc(struct bcma_device *dev)
{
u32 val;
- /*
- * Delay after PHY initialized to ensure HC is ready to be configured
- */
- usleep_range(1000, 2000);
-
/* Set packet buffer OUT threshold */
val = bcma_read32(dev, 0x94);
val &= 0xffff;
@@ -213,20 +253,33 @@ static void bcma_hcd_init_chip_arm_hc(struct bcma_device *dev)
val = bcma_read32(dev, 0x9c);
val |= 1;
bcma_write32(dev, 0x9c, val);
+
+ /*
+ * Broadcom initializes PHY and then waits to ensure HC is ready to be
+ * configured. In our case the order is reversed. We just initialized
+ * controller and we let HCD initialize PHY, so let's wait (sleep) now.
+ */
+ usleep_range(1000, 2000);
}
-static void bcma_hcd_init_chip_arm(struct bcma_device *dev)
+/**
+ * bcma_hcd_usb20_ns_init - Initialize Northstar USB 2.0 controller
+ */
+static int bcma_hcd_usb20_ns_init(struct bcma_hcd_device *bcma_hcd)
{
- bcma_core_enable(dev, 0);
+ struct bcma_device *core = bcma_hcd->core;
+ struct bcma_chipinfo *ci = &core->bus->chipinfo;
+ struct device *dev = &core->dev;
- if (dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM4707 ||
- dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM53018) {
- if (dev->bus->chipinfo.pkg == BCMA_PKG_ID_BCM4707 ||
- dev->bus->chipinfo.pkg == BCMA_PKG_ID_BCM4708)
- bcma_hcd_init_chip_arm_phy(dev);
+ bcma_core_enable(core, 0);
- bcma_hcd_init_chip_arm_hc(dev);
- }
+ if (ci->id == BCMA_CHIP_ID_BCM4707 ||
+ ci->id == BCMA_CHIP_ID_BCM53018)
+ bcma_hcd_usb20_ns_init_hc(core);
+
+ of_platform_default_populate(dev->of_node, NULL, dev);
+
+ return 0;
}
static void bcma_hci_platform_power_gpio(struct bcma_device *dev, bool val)
@@ -299,16 +352,7 @@ static int bcma_hcd_usb20_init(struct bcma_hcd_device *usb_dev)
if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32)))
return -EOPNOTSUPP;
- switch (dev->id.id) {
- case BCMA_CORE_NS_USB20:
- bcma_hcd_init_chip_arm(dev);
- break;
- case BCMA_CORE_USB20_HOST:
- bcma_hcd_init_chip_mips(dev);
- break;
- default:
- return -ENODEV;
- }
+ bcma_hcd_init_chip_mips(dev);
/* In AI chips EHCI is addrspace 0, OHCI is 1 */
ohci_addr = dev->addr_s[0];
@@ -338,6 +382,18 @@ err_unregister_ohci_dev:
return err;
}
+static int bcma_hcd_usb30_init(struct bcma_hcd_device *bcma_hcd)
+{
+ struct bcma_device *core = bcma_hcd->core;
+ struct device *dev = &core->dev;
+
+ bcma_core_enable(core, 0);
+
+ of_platform_default_populate(dev->of_node, NULL, dev);
+
+ return 0;
+}
+
static int bcma_hcd_probe(struct bcma_device *core)
{
int err;
@@ -357,14 +413,24 @@ static int bcma_hcd_probe(struct bcma_device *core)
switch (core->id.id) {
case BCMA_CORE_USB20_HOST:
+ if (IS_ENABLED(CONFIG_ARM))
+ err = bcma_hcd_usb20_old_arm_init(usb_dev);
+ else if (IS_ENABLED(CONFIG_MIPS))
+ err = bcma_hcd_usb20_init(usb_dev);
+ else
+ err = -ENOTSUPP;
+ break;
case BCMA_CORE_NS_USB20:
- err = bcma_hcd_usb20_init(usb_dev);
- if (err)
- return err;
+ err = bcma_hcd_usb20_ns_init(usb_dev);
+ break;
+ case BCMA_CORE_NS_USB30:
+ err = bcma_hcd_usb30_init(usb_dev);
break;
default:
return -ENODEV;
}
+ if (err)
+ return err;
bcma_set_drvdata(core, usb_dev);
return 0;
@@ -416,6 +482,7 @@ static int bcma_hcd_resume(struct bcma_device *dev)
static const struct bcma_device_id bcma_hcd_table[] = {
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB20, BCMA_ANY_REV, BCMA_ANY_CLASS),
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB30, BCMA_ANY_REV, BCMA_ANY_CLASS),
{},
};
MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index 6816b8c371d0..876dca4fc216 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -38,7 +38,7 @@
#include "ehci.h"
#define DRIVER_DESC "EHCI generic platform driver"
-#define EHCI_MAX_CLKS 3
+#define EHCI_MAX_CLKS 4
#define EHCI_MAX_RSTS 3
#define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv)
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index 0960f41f945a..55a0ae6f2d74 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -310,10 +310,8 @@ static struct fhci_usb *fhci_create_lld(struct fhci_hcd *fhci)
/* allocate memory for SCC data structure */
usb = kzalloc(sizeof(*usb), GFP_KERNEL);
- if (!usb) {
- fhci_err(fhci, "no memory for SCC data struct\n");
+ if (!usb)
return NULL;
- }
usb->fhci = fhci;
usb->hc_list = fhci->hc_list;
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
index 1044b0f9d656..f07ccb25bc24 100644
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -222,23 +222,17 @@ static int fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev)
pdata->controller_ver = usb_get_ver_info(np);
/* Activate Erratum by reading property in device tree */
- if (of_get_property(np, "fsl,usb-erratum-a007792", NULL))
- pdata->has_fsl_erratum_a007792 = 1;
- else
- pdata->has_fsl_erratum_a007792 = 0;
- if (of_get_property(np, "fsl,usb-erratum-a005275", NULL))
- pdata->has_fsl_erratum_a005275 = 1;
- else
- pdata->has_fsl_erratum_a005275 = 0;
+ pdata->has_fsl_erratum_a007792 =
+ of_property_read_bool(np, "fsl,usb-erratum-a007792");
+ pdata->has_fsl_erratum_a005275 =
+ of_property_read_bool(np, "fsl,usb-erratum-a005275");
/*
* Determine whether phy_clk_valid needs to be checked
* by reading property in device tree
*/
- if (of_get_property(np, "phy-clk-valid", NULL))
- pdata->check_phy_clk_valid = 1;
- else
- pdata->check_phy_clk_valid = 0;
+ pdata->check_phy_clk_valid =
+ of_property_read_bool(np, "phy-clk-valid");
if (pdata->have_sysif_regs) {
if (pdata->controller_ver == FSL_USB_VER_NONE) {
diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index 2f7690092a7f..369869a29ebd 100644
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -1856,15 +1856,11 @@ max3421_probe(struct spi_device *spi)
INIT_LIST_HEAD(&max3421_hcd->ep_list);
max3421_hcd->tx = kmalloc(sizeof(*max3421_hcd->tx), GFP_KERNEL);
- if (!max3421_hcd->tx) {
- dev_err(&spi->dev, "failed to kmalloc tx buffer\n");
+ if (!max3421_hcd->tx)
goto error;
- }
max3421_hcd->rx = kmalloc(sizeof(*max3421_hcd->rx), GFP_KERNEL);
- if (!max3421_hcd->rx) {
- dev_err(&spi->dev, "failed to kmalloc rx buffer\n");
+ if (!max3421_hcd->rx)
goto error;
- }
max3421_hcd->spi_thread = kthread_run(max3421_spi_thread, hcd,
"max3421_spi_thread");
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index d177372bb357..5b5880c0ae19 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -21,8 +21,11 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
+#include <soc/at91/atmel-sfr.h>
#include "ohci.h"
@@ -51,6 +54,7 @@ struct ohci_at91_priv {
struct clk *hclk;
bool clocked;
bool wakeup; /* Saved wake-up state for resume */
+ struct regmap *sfr_regmap;
};
/* interface and function clocks; sometimes also an AHB clock */
@@ -134,6 +138,17 @@ static void at91_stop_hc(struct platform_device *pdev)
static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
+static struct regmap *at91_dt_syscon_sfr(void)
+{
+ struct regmap *regmap;
+
+ regmap = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
+ if (IS_ERR(regmap))
+ regmap = NULL;
+
+ return regmap;
+}
+
/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */
@@ -197,6 +212,10 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
goto err;
}
+ ohci_at91->sfr_regmap = at91_dt_syscon_sfr();
+ if (!ohci_at91->sfr_regmap)
+ dev_warn(dev, "failed to find sfr node\n");
+
board = hcd->self.controller->platform_data;
ohci = hcd_to_ohci(hcd);
ohci->num_ports = board->ports;
@@ -282,6 +301,28 @@ static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf)
return length;
}
+static int ohci_at91_port_suspend(struct regmap *regmap, u8 set)
+{
+ u32 regval;
+ int ret;
+
+ if (!regmap)
+ return 0;
+
+ ret = regmap_read(regmap, AT91_SFR_OHCIICR, &regval);
+ if (ret)
+ return ret;
+
+ if (set)
+ regval |= AT91_OHCIICR_USB_SUSPEND;
+ else
+ regval &= ~AT91_OHCIICR_USB_SUSPEND;
+
+ regmap_write(regmap, AT91_SFR_OHCIICR, regval);
+
+ return 0;
+}
+
/*
* Look at the control requests to the root hub and see if we need to override.
*/
@@ -289,6 +330,7 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
struct at91_usbh_data *pdata = dev_get_platdata(hcd->self.controller);
+ struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
struct usb_hub_descriptor *desc;
int ret = -EINVAL;
u32 *data = (u32 *)buf;
@@ -301,7 +343,8 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
switch (typeReq) {
case SetPortFeature:
- if (wValue == USB_PORT_FEAT_POWER) {
+ switch (wValue) {
+ case USB_PORT_FEAT_POWER:
dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
if (valid_port(wIndex)) {
ohci_at91_usb_set_power(pdata, wIndex, 1);
@@ -309,6 +352,15 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
}
goto out;
+
+ case USB_PORT_FEAT_SUSPEND:
+ dev_dbg(hcd->self.controller, "SetPortFeat: SUSPEND\n");
+ if (valid_port(wIndex)) {
+ ohci_at91_port_suspend(ohci_at91->sfr_regmap,
+ 1);
+ return 0;
+ }
+ break;
}
break;
@@ -342,6 +394,16 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
ohci_at91_usb_set_power(pdata, wIndex, 0);
return 0;
}
+ break;
+
+ case USB_PORT_FEAT_SUSPEND:
+ dev_dbg(hcd->self.controller, "ClearPortFeature: SUSPEND\n");
+ if (valid_port(wIndex)) {
+ ohci_at91_port_suspend(ohci_at91->sfr_regmap,
+ 0);
+ return 0;
+ }
+ break;
}
break;
}
@@ -599,6 +661,8 @@ ohci_hcd_at91_drv_suspend(struct device *dev)
if (ohci_at91->wakeup)
enable_irq_wake(hcd->irq);
+ ohci_at91_port_suspend(ohci_at91->sfr_regmap, 1);
+
ret = ohci_suspend(hcd, ohci_at91->wakeup);
if (ret) {
if (ohci_at91->wakeup)
@@ -638,6 +702,9 @@ ohci_hcd_at91_drv_resume(struct device *dev)
at91_start_clock(ohci_at91);
ohci_resume(hcd, false);
+
+ ohci_at91_port_suspend(ohci_at91->sfr_regmap, 0);
+
return 0;
}
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index de7c68602a7e..495c1454b9e8 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -36,7 +36,6 @@
#include <mach/mux.h>
#include <mach/hardware.h>
-#include <mach/irqs.h>
#include <mach/usb.h>
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index 2ac266d692a2..3a9ea32508df 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -13,9 +13,7 @@
* This file is licenced under the GPL.
*/
-#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <mach/assabet.h>
#include <asm/hardware/sa1111.h>
#ifndef CONFIG_SA1111
@@ -127,7 +125,7 @@ static int sa1111_start_hc(struct sa1111_dev *dev)
dev_dbg(&dev->dev, "starting SA-1111 OHCI USB Controller\n");
if (machine_is_xp860() ||
- machine_has_neponset() ||
+ machine_is_assabet() ||
machine_is_pfs168() ||
machine_is_badge4())
usb_rst = USB_RESET_PWRSENSELOW | USB_RESET_PWRCTRLLOW;
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index a7de8e8bb458..5d3d914ab4fb 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -601,11 +601,8 @@ static int uhci_start(struct usb_hcd *hcd)
uhci->frame_cpu = kcalloc(UHCI_NUMFRAMES, sizeof(*uhci->frame_cpu),
GFP_KERNEL);
- if (!uhci->frame_cpu) {
- dev_err(uhci_dev(uhci),
- "unable to allocate memory for frame pointers\n");
+ if (!uhci->frame_cpu)
goto err_alloc_frame_cpu;
- }
uhci->td_pool = dma_pool_create("uhci_td", uhci_dev(uhci),
sizeof(struct uhci_td), 16, 0);
diff --git a/drivers/usb/host/whci/init.c b/drivers/usb/host/whci/init.c
index e36372393bb1..ad8eb575c30a 100644
--- a/drivers/usb/host/whci/init.c
+++ b/drivers/usb/host/whci/init.c
@@ -65,7 +65,7 @@ int whc_init(struct whc *whc)
init_waitqueue_head(&whc->cmd_wq);
init_waitqueue_head(&whc->async_list_wq);
init_waitqueue_head(&whc->periodic_list_wq);
- whc->workqueue = create_singlethread_workqueue(dev_name(&whc->umc->dev));
+ whc->workqueue = alloc_ordered_workqueue(dev_name(&whc->umc->dev), 0);
if (whc->workqueue == NULL) {
ret = -ENOMEM;
goto error;
diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index 0f53ae0f464e..a59fafb4b329 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -1033,7 +1033,6 @@ static int tegra_xusb_probe(struct platform_device *pdev)
tegra->phys = devm_kcalloc(&pdev->dev, tegra->num_phys,
sizeof(*tegra->phys), GFP_KERNEL);
if (!tegra->phys) {
- dev_err(&pdev->dev, "failed to allocate PHY array\n");
err = -ENOMEM;
goto put_padctl;
}
@@ -1117,6 +1116,7 @@ static int tegra_xusb_probe(struct platform_device *pdev)
tegra->hcd);
if (!xhci->shared_hcd) {
dev_err(&pdev->dev, "failed to create shared HCD\n");
+ err = -ENOMEM;
goto remove_usb2;
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 01d96c9b3a75..1a4ca02729c2 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -295,10 +295,8 @@ static int xhci_setup_msix(struct xhci_hcd *xhci)
xhci->msix_entries =
kmalloc((sizeof(struct msix_entry))*xhci->msix_count,
GFP_KERNEL);
- if (!xhci->msix_entries) {
- xhci_err(xhci, "Failed to allocate MSI-X entries\n");
+ if (!xhci->msix_entries)
return -ENOMEM;
- }
for (i = 0; i < xhci->msix_count; i++) {
xhci->msix_entries[i].entry = i;
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index eb8f8d37cd95..47b357760afc 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -240,6 +240,12 @@ config USB_HSIC_USB3503
help
This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver.
+config USB_HSIC_USB4604
+ tristate "USB4604 HSIC to USB20 Driver"
+ depends on I2C
+ help
+ This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver.
+
config USB_LINK_LAYER_TEST
tristate "USB Link Layer Test driver"
help
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index 3d79faaad2fb..3d1992750da4 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_USB_USS720) += uss720.o
obj-$(CONFIG_USB_SEVSEG) += usbsevseg.o
obj-$(CONFIG_USB_YUREX) += yurex.o
obj-$(CONFIG_USB_HSIC_USB3503) += usb3503.o
+obj-$(CONFIG_USB_HSIC_USB4604) += usb4604.o
obj-$(CONFIG_USB_CHAOSKEY) += chaoskey.o
obj-$(CONFIG_UCSI) += ucsi.o
diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
index 3071c0ef909b..564268fca07a 100644
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -672,8 +672,7 @@ static int adu_probe(struct usb_interface *interface,
/* allocate memory for our device state and initialize it */
dev = kzalloc(sizeof(struct adu_device), GFP_KERNEL);
- if (dev == NULL) {
- dev_err(&interface->dev, "Out of memory\n");
+ if (!dev) {
retval = -ENOMEM;
goto exit;
}
@@ -710,7 +709,6 @@ static int adu_probe(struct usb_interface *interface,
dev->read_buffer_primary = kmalloc((4 * in_end_size), GFP_KERNEL);
if (!dev->read_buffer_primary) {
- dev_err(&interface->dev, "Couldn't allocate read_buffer_primary\n");
retval = -ENOMEM;
goto error;
}
@@ -723,7 +721,6 @@ static int adu_probe(struct usb_interface *interface,
dev->read_buffer_secondary = kmalloc((4 * in_end_size), GFP_KERNEL);
if (!dev->read_buffer_secondary) {
- dev_err(&interface->dev, "Couldn't allocate read_buffer_secondary\n");
retval = -ENOMEM;
goto error;
}
@@ -735,29 +732,21 @@ static int adu_probe(struct usb_interface *interface,
memset(dev->read_buffer_secondary + (3 * in_end_size), 'h', in_end_size);
dev->interrupt_in_buffer = kmalloc(in_end_size, GFP_KERNEL);
- if (!dev->interrupt_in_buffer) {
- dev_err(&interface->dev, "Couldn't allocate interrupt_in_buffer\n");
+ if (!dev->interrupt_in_buffer)
goto error;
- }
/* debug code prime the buffer */
memset(dev->interrupt_in_buffer, 'i', in_end_size);
dev->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!dev->interrupt_in_urb) {
- dev_err(&interface->dev, "Couldn't allocate interrupt_in_urb\n");
+ if (!dev->interrupt_in_urb)
goto error;
- }
dev->interrupt_out_buffer = kmalloc(out_end_size, GFP_KERNEL);
- if (!dev->interrupt_out_buffer) {
- dev_err(&interface->dev, "Couldn't allocate interrupt_out_buffer\n");
+ if (!dev->interrupt_out_buffer)
goto error;
- }
dev->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!dev->interrupt_out_urb) {
- dev_err(&interface->dev, "Couldn't allocate interrupt_out_urb\n");
+ if (!dev->interrupt_out_urb)
goto error;
- }
if (!usb_string(udev, udev->descriptor.iSerialNumber, dev->serial_number,
sizeof(dev->serial_number))) {
diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c
index a0a3827b4aff..da5ff401a354 100644
--- a/drivers/usb/misc/appledisplay.c
+++ b/drivers/usb/misc/appledisplay.c
@@ -85,7 +85,6 @@ struct appledisplay {
};
static atomic_t count_displays = ATOMIC_INIT(0);
-static struct workqueue_struct *wq;
static void appledisplay_complete(struct urb *urb)
{
@@ -122,7 +121,7 @@ static void appledisplay_complete(struct urb *urb)
case ACD_BTN_BRIGHT_UP:
case ACD_BTN_BRIGHT_DOWN:
pdata->button_pressed = 1;
- queue_delayed_work(wq, &pdata->work, 0);
+ schedule_delayed_work(&pdata->work, 0);
break;
case ACD_BTN_NONE:
default:
@@ -239,7 +238,6 @@ static int appledisplay_probe(struct usb_interface *iface,
pdata = kzalloc(sizeof(struct appledisplay), GFP_KERNEL);
if (!pdata) {
retval = -ENOMEM;
- dev_err(&iface->dev, "Out of memory\n");
goto error;
}
@@ -253,8 +251,6 @@ static int appledisplay_probe(struct usb_interface *iface,
pdata->msgdata = kmalloc(ACD_MSG_BUFFER_LEN, GFP_KERNEL);
if (!pdata->msgdata) {
retval = -ENOMEM;
- dev_err(&iface->dev,
- "Allocating buffer for control messages failed\n");
goto error;
}
@@ -262,7 +258,6 @@ static int appledisplay_probe(struct usb_interface *iface,
pdata->urb = usb_alloc_urb(0, GFP_KERNEL);
if (!pdata->urb) {
retval = -ENOMEM;
- dev_err(&iface->dev, "Allocating URB failed\n");
goto error;
}
@@ -344,7 +339,7 @@ static void appledisplay_disconnect(struct usb_interface *iface)
if (pdata) {
usb_kill_urb(pdata->urb);
- cancel_delayed_work(&pdata->work);
+ cancel_delayed_work_sync(&pdata->work);
backlight_device_unregister(pdata->bd);
usb_free_coherent(pdata->udev, ACD_URB_BUFFER_LEN,
pdata->urbdata, pdata->urb->transfer_dma);
@@ -365,19 +360,11 @@ static struct usb_driver appledisplay_driver = {
static int __init appledisplay_init(void)
{
- wq = create_singlethread_workqueue("appledisplay");
- if (!wq) {
- printk(KERN_ERR "appledisplay: Could not create work queue\n");
- return -ENOMEM;
- }
-
return usb_register(&appledisplay_driver);
}
static void __exit appledisplay_exit(void)
{
- flush_workqueue(wq);
- destroy_workqueue(wq);
usb_deregister(&appledisplay_driver);
}
diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c
index 402b94dd2531..5c93a888c40e 100644
--- a/drivers/usb/misc/cypress_cy7c63.c
+++ b/drivers/usb/misc/cypress_cy7c63.c
@@ -79,7 +79,6 @@ static int vendor_command(struct cypress *dev, unsigned char request,
/* allocate some memory for the i/o buffer*/
iobuf = kzalloc(CYPRESS_MAX_REQSIZE, GFP_KERNEL);
if (!iobuf) {
- dev_err(&dev->udev->dev, "Out of memory!\n");
retval = -ENOMEM;
goto error;
}
@@ -208,10 +207,8 @@ static int cypress_probe(struct usb_interface *interface,
/* allocate memory for our device state and initialize it */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
- if (dev == NULL) {
- dev_err(&interface->dev, "Out of memory!\n");
+ if (!dev)
goto error_mem;
- }
dev->udev = usb_get_dev(interface_to_usbdev(interface));
diff --git a/drivers/usb/misc/cytherm.c b/drivers/usb/misc/cytherm.c
index 9bab1a33bc16..9d8bb8dacdcd 100644
--- a/drivers/usb/misc/cytherm.c
+++ b/drivers/usb/misc/cytherm.c
@@ -101,10 +101,8 @@ static ssize_t set_brightness(struct device *dev, struct device_attribute *attr,
int retval;
buffer = kmalloc(8, GFP_KERNEL);
- if (!buffer) {
- dev_err(&cytherm->udev->dev, "out of memory\n");
+ if (!buffer)
return 0;
- }
cytherm->brightness = simple_strtoul(buf, NULL, 10);
@@ -148,10 +146,8 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *attr, char
int temp, sign;
buffer = kmalloc(8, GFP_KERNEL);
- if (!buffer) {
- dev_err(&cytherm->udev->dev, "out of memory\n");
+ if (!buffer)
return 0;
- }
/* read temperature */
retval = vendor_command(cytherm->udev, READ_RAM, TEMP, 0, buffer, 8);
@@ -192,10 +188,8 @@ static ssize_t show_button(struct device *dev, struct device_attribute *attr, ch
unsigned char *buffer;
buffer = kmalloc(8, GFP_KERNEL);
- if (!buffer) {
- dev_err(&cytherm->udev->dev, "out of memory\n");
+ if (!buffer)
return 0;
- }
/* check button */
retval = vendor_command(cytherm->udev, READ_RAM, BUTTON, 0, buffer, 8);
@@ -230,10 +224,8 @@ static ssize_t show_port0(struct device *dev, struct device_attribute *attr, cha
unsigned char *buffer;
buffer = kmalloc(8, GFP_KERNEL);
- if (!buffer) {
- dev_err(&cytherm->udev->dev, "out of memory\n");
+ if (!buffer)
return 0;
- }
retval = vendor_command(cytherm->udev, READ_PORT, 0, 0, buffer, 8);
if (retval)
@@ -257,10 +249,8 @@ static ssize_t set_port0(struct device *dev, struct device_attribute *attr, cons
int tmp;
buffer = kmalloc(8, GFP_KERNEL);
- if (!buffer) {
- dev_err(&cytherm->udev->dev, "out of memory\n");
+ if (!buffer)
return 0;
- }
tmp = simple_strtoul(buf, NULL, 10);
@@ -290,10 +280,8 @@ static ssize_t show_port1(struct device *dev, struct device_attribute *attr, cha
unsigned char *buffer;
buffer = kmalloc(8, GFP_KERNEL);
- if (!buffer) {
- dev_err(&cytherm->udev->dev, "out of memory\n");
+ if (!buffer)
return 0;
- }
retval = vendor_command(cytherm->udev, READ_PORT, 1, 0, buffer, 8);
if (retval)
@@ -317,10 +305,8 @@ static ssize_t set_port1(struct device *dev, struct device_attribute *attr, cons
int tmp;
buffer = kmalloc(8, GFP_KERNEL);
- if (!buffer) {
- dev_err(&cytherm->udev->dev, "out of memory\n");
+ if (!buffer)
return 0;
- }
tmp = simple_strtoul(buf, NULL, 10);
@@ -351,10 +337,8 @@ static int cytherm_probe(struct usb_interface *interface,
int retval = -ENOMEM;
dev = kzalloc (sizeof(struct usb_cytherm), GFP_KERNEL);
- if (dev == NULL) {
- dev_err (&interface->dev, "Out of memory\n");
+ if (!dev)
goto error_mem;
- }
dev->udev = usb_get_dev(udev);
diff --git a/drivers/usb/misc/ezusb.c b/drivers/usb/misc/ezusb.c
index 947811bc8126..837208f14f86 100644
--- a/drivers/usb/misc/ezusb.c
+++ b/drivers/usb/misc/ezusb.c
@@ -22,7 +22,7 @@ struct ezusb_fx_type {
unsigned short max_internal_adress;
};
-static struct ezusb_fx_type ezusb_fx1 = {
+static const struct ezusb_fx_type ezusb_fx1 = {
.cpucs_reg = 0x7F92,
.max_internal_adress = 0x1B3F,
};
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index 9b5b3b2281ca..9a82f8308ad7 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -61,9 +61,6 @@ module_param(distrust_firmware, bool, 0);
MODULE_PARM_DESC(distrust_firmware,
"true to distrust firmware power/overcurrent setup");
extern struct platform_driver u132_platform_driver;
-static struct workqueue_struct *status_queue;
-static struct workqueue_struct *command_queue;
-static struct workqueue_struct *respond_queue;
/*
* ftdi_module_lock exists to protect access to global variables
*
@@ -228,56 +225,56 @@ static void ftdi_elan_init_kref(struct usb_ftdi *ftdi)
static void ftdi_status_requeue_work(struct usb_ftdi *ftdi, unsigned int delta)
{
- if (!queue_delayed_work(status_queue, &ftdi->status_work, delta))
+ if (!schedule_delayed_work(&ftdi->status_work, delta))
kref_put(&ftdi->kref, ftdi_elan_delete);
}
static void ftdi_status_queue_work(struct usb_ftdi *ftdi, unsigned int delta)
{
- if (queue_delayed_work(status_queue, &ftdi->status_work, delta))
+ if (schedule_delayed_work(&ftdi->status_work, delta))
kref_get(&ftdi->kref);
}
static void ftdi_status_cancel_work(struct usb_ftdi *ftdi)
{
- if (cancel_delayed_work(&ftdi->status_work))
+ if (cancel_delayed_work_sync(&ftdi->status_work))
kref_put(&ftdi->kref, ftdi_elan_delete);
}
static void ftdi_command_requeue_work(struct usb_ftdi *ftdi, unsigned int delta)
{
- if (!queue_delayed_work(command_queue, &ftdi->command_work, delta))
+ if (!schedule_delayed_work(&ftdi->command_work, delta))
kref_put(&ftdi->kref, ftdi_elan_delete);
}
static void ftdi_command_queue_work(struct usb_ftdi *ftdi, unsigned int delta)
{
- if (queue_delayed_work(command_queue, &ftdi->command_work, delta))
+ if (schedule_delayed_work(&ftdi->command_work, delta))
kref_get(&ftdi->kref);
}
static void ftdi_command_cancel_work(struct usb_ftdi *ftdi)
{
- if (cancel_delayed_work(&ftdi->command_work))
+ if (cancel_delayed_work_sync(&ftdi->command_work))
kref_put(&ftdi->kref, ftdi_elan_delete);
}
static void ftdi_response_requeue_work(struct usb_ftdi *ftdi,
unsigned int delta)
{
- if (!queue_delayed_work(respond_queue, &ftdi->respond_work, delta))
+ if (!schedule_delayed_work(&ftdi->respond_work, delta))
kref_put(&ftdi->kref, ftdi_elan_delete);
}
static void ftdi_respond_queue_work(struct usb_ftdi *ftdi, unsigned int delta)
{
- if (queue_delayed_work(respond_queue, &ftdi->respond_work, delta))
+ if (schedule_delayed_work(&ftdi->respond_work, delta))
kref_get(&ftdi->kref);
}
static void ftdi_response_cancel_work(struct usb_ftdi *ftdi)
{
- if (cancel_delayed_work(&ftdi->respond_work))
+ if (cancel_delayed_work_sync(&ftdi->respond_work))
kref_put(&ftdi->kref, ftdi_elan_delete);
}
@@ -785,11 +782,8 @@ static int ftdi_elan_command_engine(struct usb_ftdi *ftdi)
return 0;
total_size = ftdi_elan_total_command_size(ftdi, command_size);
urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!urb) {
- dev_err(&ftdi->udev->dev, "could not get a urb to write %d commands totaling %d bytes to the Uxxx\n",
- command_size, total_size);
+ if (!urb)
return -ENOMEM;
- }
buf = usb_alloc_coherent(ftdi->udev, total_size, GFP_KERNEL,
&urb->transfer_dma);
if (!buf) {
@@ -1948,10 +1942,8 @@ static int ftdi_elan_synchronize_flush(struct usb_ftdi *ftdi)
int I = 257;
int i = 0;
urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!urb) {
- dev_err(&ftdi->udev->dev, "could not alloc a urb for flush sequence\n");
+ if (!urb)
return -ENOMEM;
- }
buf = usb_alloc_coherent(ftdi->udev, I, GFP_KERNEL, &urb->transfer_dma);
if (!buf) {
dev_err(&ftdi->udev->dev, "could not get a buffer for flush sequence\n");
@@ -1988,10 +1980,8 @@ static int ftdi_elan_synchronize_reset(struct usb_ftdi *ftdi)
int I = 4;
int i = 0;
urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!urb) {
- dev_err(&ftdi->udev->dev, "could not get a urb for the reset sequence\n");
+ if (!urb)
return -ENOMEM;
- }
buf = usb_alloc_coherent(ftdi->udev, I, GFP_KERNEL, &urb->transfer_dma);
if (!buf) {
dev_err(&ftdi->udev->dev, "could not get a buffer for the reset sequence\n");
@@ -2740,7 +2730,6 @@ static int ftdi_elan_probe(struct usb_interface *interface,
ftdi->bulk_in_endpointAddr = endpoint->bEndpointAddress;
ftdi->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
if (!ftdi->bulk_in_buffer) {
- dev_err(&ftdi->udev->dev, "Could not allocate bulk_in_buffer\n");
retval = -ENOMEM;
goto error;
}
@@ -2823,9 +2812,6 @@ static void ftdi_elan_disconnect(struct usb_interface *interface)
ftdi->initialized = 0;
ftdi->registered = 0;
}
- flush_workqueue(status_queue);
- flush_workqueue(command_queue);
- flush_workqueue(respond_queue);
ftdi->disconnected += 1;
usb_set_intfdata(interface, NULL);
dev_info(&ftdi->udev->dev, "USB FTDI U132 host controller interface now disconnected\n");
@@ -2845,31 +2831,12 @@ static int __init ftdi_elan_init(void)
pr_info("driver %s\n", ftdi_elan_driver.name);
mutex_init(&ftdi_module_lock);
INIT_LIST_HEAD(&ftdi_static_list);
- status_queue = create_singlethread_workqueue("ftdi-status-control");
- if (!status_queue)
- goto err_status_queue;
- command_queue = create_singlethread_workqueue("ftdi-command-engine");
- if (!command_queue)
- goto err_command_queue;
- respond_queue = create_singlethread_workqueue("ftdi-respond-engine");
- if (!respond_queue)
- goto err_respond_queue;
result = usb_register(&ftdi_elan_driver);
if (result) {
- destroy_workqueue(status_queue);
- destroy_workqueue(command_queue);
- destroy_workqueue(respond_queue);
pr_err("usb_register failed. Error number %d\n", result);
}
return result;
-err_respond_queue:
- destroy_workqueue(command_queue);
-err_command_queue:
- destroy_workqueue(status_queue);
-err_status_queue:
- pr_err("%s couldn't create workqueue\n", ftdi_elan_driver.name);
- return -ENOMEM;
}
static void __exit ftdi_elan_exit(void)
@@ -2882,15 +2849,7 @@ static void __exit ftdi_elan_exit(void)
ftdi_status_cancel_work(ftdi);
ftdi_command_cancel_work(ftdi);
ftdi_response_cancel_work(ftdi);
- } flush_workqueue(status_queue);
- destroy_workqueue(status_queue);
- status_queue = NULL;
- flush_workqueue(command_queue);
- destroy_workqueue(command_queue);
- command_queue = NULL;
- flush_workqueue(respond_queue);
- destroy_workqueue(respond_queue);
- respond_queue = NULL;
+ }
}
diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c
index 5105397e62fc..2975e80b7a56 100644
--- a/drivers/usb/misc/idmouse.c
+++ b/drivers/usb/misc/idmouse.c
@@ -366,7 +366,6 @@ static int idmouse_probe(struct usb_interface *interface,
kmalloc(IMGSIZE + dev->bulk_in_size, GFP_KERNEL);
if (!dev->bulk_in_buffer) {
- dev_err(&interface->dev, "Unable to allocate input buffer.\n");
idmouse_delete(dev);
return -ENOMEM;
}
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index 1950e87b4219..095778ff984d 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -278,7 +278,7 @@ static ssize_t iowarrior_read(struct file *file, char __user *buffer,
dev = file->private_data;
/* verify that the device wasn't unplugged */
- if (dev == NULL || !dev->present)
+ if (!dev || !dev->present)
return -ENODEV;
dev_dbg(&dev->interface->dev, "minor %d, count = %zd\n",
@@ -413,8 +413,6 @@ static ssize_t iowarrior_write(struct file *file,
int_out_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!int_out_urb) {
retval = -ENOMEM;
- dev_dbg(&dev->interface->dev,
- "Unable to allocate urb\n");
goto error_no_urb;
}
buf = usb_alloc_coherent(dev->udev, dev->report_size,
@@ -482,9 +480,8 @@ static long iowarrior_ioctl(struct file *file, unsigned int cmd,
int io_res; /* checks for bytes read/written and copy_to/from_user results */
dev = file->private_data;
- if (dev == NULL) {
+ if (!dev)
return -ENODEV;
- }
buffer = kzalloc(dev->report_size, GFP_KERNEL);
if (!buffer)
@@ -654,9 +651,8 @@ static int iowarrior_release(struct inode *inode, struct file *file)
int retval = 0;
dev = file->private_data;
- if (dev == NULL) {
+ if (!dev)
return -ENODEV;
- }
dev_dbg(&dev->interface->dev, "minor %d\n", dev->minor);
@@ -766,10 +762,8 @@ static int iowarrior_probe(struct usb_interface *interface,
/* allocate memory for our device state and initialize it */
dev = kzalloc(sizeof(struct iowarrior), GFP_KERNEL);
- if (dev == NULL) {
- dev_err(&interface->dev, "Out of memory\n");
+ if (!dev)
return retval;
- }
mutex_init(&dev->mutex);
@@ -812,15 +806,11 @@ static int iowarrior_probe(struct usb_interface *interface,
/* create the urb and buffer for reading */
dev->int_in_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!dev->int_in_urb) {
- dev_err(&interface->dev, "Couldn't allocate interrupt_in_urb\n");
+ if (!dev->int_in_urb)
goto error;
- }
dev->int_in_buffer = kmalloc(dev->report_size, GFP_KERNEL);
- if (!dev->int_in_buffer) {
- dev_err(&interface->dev, "Couldn't allocate int_in_buffer\n");
+ if (!dev->int_in_buffer)
goto error;
- }
usb_fill_int_urb(dev->int_in_urb, dev->udev,
usb_rcvintpipe(dev->udev,
dev->int_in_endpoint->bEndpointAddress),
@@ -831,10 +821,8 @@ static int iowarrior_probe(struct usb_interface *interface,
dev->read_queue =
kmalloc(((dev->report_size + 1) * MAX_INTERRUPT_BUFFER),
GFP_KERNEL);
- if (!dev->read_queue) {
- dev_err(&interface->dev, "Couldn't allocate read_queue\n");
+ if (!dev->read_queue)
goto error;
- }
/* Get the serial-number of the chip */
memset(dev->chip_serial, 0x00, sizeof(dev->chip_serial));
usb_string(udev, udev->descriptor.iSerialNumber, dev->chip_serial,
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index cce22ff1c2eb..9ca595632f17 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -658,10 +658,8 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id *
/* allocate memory for our device state and initialize it */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
- if (dev == NULL) {
- dev_err(&intf->dev, "Out of memory\n");
+ if (!dev)
goto exit;
- }
mutex_init(&dev->mutex);
spin_lock_init(&dev->rbsl);
dev->intf = intf;
@@ -674,10 +672,8 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id *
(le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_LD_COM3LAB)) &&
(le16_to_cpu(udev->descriptor.bcdDevice) <= 0x103)) {
buffer = kmalloc(256, GFP_KERNEL);
- if (buffer == NULL) {
- dev_err(&intf->dev, "Couldn't allocate string buffer\n");
+ if (!buffer)
goto error;
- }
/* usb_string makes SETUP+STALL to leave always ControlReadLoop */
usb_string(udev, 255, buffer, 256);
kfree(buffer);
@@ -704,32 +700,22 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id *
dev->interrupt_in_endpoint_size = usb_endpoint_maxp(dev->interrupt_in_endpoint);
dev->ring_buffer = kmalloc(ring_buffer_size*(sizeof(size_t)+dev->interrupt_in_endpoint_size), GFP_KERNEL);
- if (!dev->ring_buffer) {
- dev_err(&intf->dev, "Couldn't allocate ring_buffer\n");
+ if (!dev->ring_buffer)
goto error;
- }
dev->interrupt_in_buffer = kmalloc(dev->interrupt_in_endpoint_size, GFP_KERNEL);
- if (!dev->interrupt_in_buffer) {
- dev_err(&intf->dev, "Couldn't allocate interrupt_in_buffer\n");
+ if (!dev->interrupt_in_buffer)
goto error;
- }
dev->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!dev->interrupt_in_urb) {
- dev_err(&intf->dev, "Couldn't allocate interrupt_in_urb\n");
+ if (!dev->interrupt_in_urb)
goto error;
- }
dev->interrupt_out_endpoint_size = dev->interrupt_out_endpoint ? usb_endpoint_maxp(dev->interrupt_out_endpoint) :
udev->descriptor.bMaxPacketSize0;
dev->interrupt_out_buffer = kmalloc(write_buffer_size*dev->interrupt_out_endpoint_size, GFP_KERNEL);
- if (!dev->interrupt_out_buffer) {
- dev_err(&intf->dev, "Couldn't allocate interrupt_out_buffer\n");
+ if (!dev->interrupt_out_buffer)
goto error;
- }
dev->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!dev->interrupt_out_urb) {
- dev_err(&intf->dev, "Couldn't allocate interrupt_out_urb\n");
+ if (!dev->interrupt_out_urb)
goto error;
- }
dev->interrupt_in_interval = min_interrupt_in_interval > dev->interrupt_in_endpoint->bInterval ? min_interrupt_in_interval : dev->interrupt_in_endpoint->bInterval;
if (dev->interrupt_out_endpoint)
dev->interrupt_out_interval = min_interrupt_out_interval > dev->interrupt_out_endpoint->bInterval ? min_interrupt_out_interval : dev->interrupt_out_endpoint->bInterval;
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index 7771be3ac178..c8fbe7b739a0 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -817,10 +817,8 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device
dev = kmalloc (sizeof(struct lego_usb_tower), GFP_KERNEL);
- if (dev == NULL) {
- dev_err(idev, "Out of memory\n");
+ if (!dev)
goto exit;
- }
mutex_init(&dev->lock);
@@ -871,51 +869,23 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device
}
dev->read_buffer = kmalloc (read_buffer_size, GFP_KERNEL);
- if (!dev->read_buffer) {
- dev_err(idev, "Couldn't allocate read_buffer\n");
+ if (!dev->read_buffer)
goto error;
- }
dev->interrupt_in_buffer = kmalloc (usb_endpoint_maxp(dev->interrupt_in_endpoint), GFP_KERNEL);
- if (!dev->interrupt_in_buffer) {
- dev_err(idev, "Couldn't allocate interrupt_in_buffer\n");
+ if (!dev->interrupt_in_buffer)
goto error;
- }
dev->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!dev->interrupt_in_urb) {
- dev_err(idev, "Couldn't allocate interrupt_in_urb\n");
+ if (!dev->interrupt_in_urb)
goto error;
- }
dev->interrupt_out_buffer = kmalloc (write_buffer_size, GFP_KERNEL);
- if (!dev->interrupt_out_buffer) {
- dev_err(idev, "Couldn't allocate interrupt_out_buffer\n");
+ if (!dev->interrupt_out_buffer)
goto error;
- }
dev->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!dev->interrupt_out_urb) {
- dev_err(idev, "Couldn't allocate interrupt_out_urb\n");
+ if (!dev->interrupt_out_urb)
goto error;
- }
dev->interrupt_in_interval = interrupt_in_interval ? interrupt_in_interval : dev->interrupt_in_endpoint->bInterval;
dev->interrupt_out_interval = interrupt_out_interval ? interrupt_out_interval : dev->interrupt_out_endpoint->bInterval;
- /* we can register the device now, as it is ready */
- usb_set_intfdata (interface, dev);
-
- retval = usb_register_dev (interface, &tower_class);
-
- if (retval) {
- /* something prevented us from registering this driver */
- dev_err(idev, "Not able to get a minor for this device.\n");
- usb_set_intfdata (interface, NULL);
- goto error;
- }
- dev->minor = interface->minor;
-
- /* let the user know what node this device is now attached to */
- dev_info(&interface->dev, "LEGO USB Tower #%d now attached to major "
- "%d minor %d\n", (dev->minor - LEGO_USB_TOWER_MINOR_BASE),
- USB_MAJOR, dev->minor);
-
/* get the firmware version and log it */
result = usb_control_msg (udev,
usb_rcvctrlpipe(udev, 0),
@@ -936,6 +906,23 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device
get_version_reply.minor,
le16_to_cpu(get_version_reply.build_no));
+ /* we can register the device now, as it is ready */
+ usb_set_intfdata (interface, dev);
+
+ retval = usb_register_dev (interface, &tower_class);
+
+ if (retval) {
+ /* something prevented us from registering this driver */
+ dev_err(idev, "Not able to get a minor for this device.\n");
+ usb_set_intfdata (interface, NULL);
+ goto error;
+ }
+ dev->minor = interface->minor;
+
+ /* let the user know what node this device is now attached to */
+ dev_info(&interface->dev, "LEGO USB Tower #%d now attached to major "
+ "%d minor %d\n", (dev->minor - LEGO_USB_TOWER_MINOR_BASE),
+ USB_MAJOR, dev->minor);
exit:
return retval;
diff --git a/drivers/usb/misc/lvstest.c b/drivers/usb/misc/lvstest.c
index 86b4e4b2ab9a..77176511658f 100644
--- a/drivers/usb/misc/lvstest.c
+++ b/drivers/usb/misc/lvstest.c
@@ -34,8 +34,6 @@ struct lvs_rh {
struct usb_hub_descriptor descriptor;
/* urb for polling interrupt pipe */
struct urb *urb;
- /* LVS RH work queue */
- struct workqueue_struct *rh_queue;
/* LVH RH work */
struct work_struct rh_work;
/* RH port status */
@@ -247,10 +245,8 @@ static ssize_t get_dev_desc_store(struct device *dev,
int ret;
descriptor = kmalloc(sizeof(*descriptor), GFP_KERNEL);
- if (!descriptor) {
- dev_err(dev, "failed to allocate descriptor memory\n");
+ if (!descriptor)
return -ENOMEM;
- }
udev = create_lvs_device(intf);
if (!udev) {
@@ -355,7 +351,7 @@ static void lvs_rh_irq(struct urb *urb)
{
struct lvs_rh *lvs = urb->context;
- queue_work(lvs->rh_queue, &lvs->rh_work);
+ schedule_work(&lvs->rh_work);
}
static int lvs_rh_probe(struct usb_interface *intf,
@@ -397,24 +393,15 @@ static int lvs_rh_probe(struct usb_interface *intf,
/* submit urb to poll interrupt endpoint */
lvs->urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!lvs->urb) {
- dev_err(&intf->dev, "couldn't allocate lvs urb\n");
+ if (!lvs->urb)
return -ENOMEM;
- }
-
- lvs->rh_queue = create_singlethread_workqueue("lvs_rh_queue");
- if (!lvs->rh_queue) {
- dev_err(&intf->dev, "couldn't create workqueue\n");
- ret = -ENOMEM;
- goto free_urb;
- }
INIT_WORK(&lvs->rh_work, lvs_rh_work);
ret = sysfs_create_group(&intf->dev.kobj, &lvs_attr_group);
if (ret < 0) {
dev_err(&intf->dev, "Failed to create sysfs node %d\n", ret);
- goto destroy_queue;
+ goto free_urb;
}
pipe = usb_rcvintpipe(hdev, endpoint->bEndpointAddress);
@@ -432,8 +419,6 @@ static int lvs_rh_probe(struct usb_interface *intf,
sysfs_remove:
sysfs_remove_group(&intf->dev.kobj, &lvs_attr_group);
-destroy_queue:
- destroy_workqueue(lvs->rh_queue);
free_urb:
usb_free_urb(lvs->urb);
return ret;
@@ -444,7 +429,7 @@ static void lvs_rh_disconnect(struct usb_interface *intf)
struct lvs_rh *lvs = usb_get_intfdata(intf);
sysfs_remove_group(&intf->dev.kobj, &lvs_attr_group);
- destroy_workqueue(lvs->rh_queue);
+ flush_work(&lvs->rh_work);
usb_free_urb(lvs->urb);
}
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 02abfcdfbf7b..05bd39d62568 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3084,7 +3084,6 @@ static int sisusb_probe(struct usb_interface *intf,
/* Allocate URBs */
sisusb->sisurbin = usb_alloc_urb(0, GFP_KERNEL);
if (!sisusb->sisurbin) {
- dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate URBs\n");
retval = -ENOMEM;
goto error_3;
}
@@ -3093,8 +3092,6 @@ static int sisusb_probe(struct usb_interface *intf,
for (i = 0; i < sisusb->numobufs; i++) {
sisusb->sisurbout[i] = usb_alloc_urb(0, GFP_KERNEL);
if (!sisusb->sisurbout[i]) {
- dev_err(&sisusb->sisusb_dev->dev,
- "Failed to allocate URBs\n");
retval = -ENOMEM;
goto error_4;
}
diff --git a/drivers/usb/misc/trancevibrator.c b/drivers/usb/misc/trancevibrator.c
index 4145314a515b..9795457723d8 100644
--- a/drivers/usb/misc/trancevibrator.c
+++ b/drivers/usb/misc/trancevibrator.c
@@ -95,8 +95,7 @@ static int tv_probe(struct usb_interface *interface,
int retval;
dev = kzalloc(sizeof(struct trancevibrator), GFP_KERNEL);
- if (dev == NULL) {
- dev_err(&interface->dev, "Out of memory\n");
+ if (!dev) {
retval = -ENOMEM;
goto error;
}
diff --git a/drivers/usb/misc/usb4604.c b/drivers/usb/misc/usb4604.c
new file mode 100644
index 000000000000..e9f37fb746ac
--- /dev/null
+++ b/drivers/usb/misc/usb4604.c
@@ -0,0 +1,175 @@
+/*
+ * Driver for SMSC USB4604 USB HSIC 4-port 2.0 hub controller driver
+ * Based on usb3503 driver
+ *
+ * Copyright (c) 2012-2013 Dongjin Kim (tobetter@gmail.com)
+ * Copyright (c) 2016 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/gpio/consumer.h>
+
+enum usb4604_mode {
+ USB4604_MODE_UNKNOWN,
+ USB4604_MODE_HUB,
+ USB4604_MODE_STANDBY,
+};
+
+struct usb4604 {
+ enum usb4604_mode mode;
+ struct device *dev;
+ struct gpio_desc *gpio_reset;
+};
+
+static void usb4604_reset(struct usb4604 *hub, int state)
+{
+ gpiod_set_value_cansleep(hub->gpio_reset, state);
+
+ /* Wait for i2c logic to come up */
+ if (state)
+ msleep(250);
+}
+
+static int usb4604_connect(struct usb4604 *hub)
+{
+ struct device *dev = hub->dev;
+ struct i2c_client *client = to_i2c_client(dev);
+ int err;
+ u8 connect_cmd[] = { 0xaa, 0x55, 0x00 };
+
+ usb4604_reset(hub, 1);
+
+ err = i2c_master_send(client, connect_cmd, ARRAY_SIZE(connect_cmd));
+ if (err < 0) {
+ usb4604_reset(hub, 0);
+ return err;
+ }
+
+ hub->mode = USB4604_MODE_HUB;
+ dev_dbg(dev, "switched to HUB mode\n");
+
+ return 0;
+}
+
+static int usb4604_switch_mode(struct usb4604 *hub, enum usb4604_mode mode)
+{
+ struct device *dev = hub->dev;
+ int err = 0;
+
+ switch (mode) {
+ case USB4604_MODE_HUB:
+ err = usb4604_connect(hub);
+ break;
+
+ case USB4604_MODE_STANDBY:
+ usb4604_reset(hub, 0);
+ dev_dbg(dev, "switched to STANDBY mode\n");
+ break;
+
+ default:
+ dev_err(dev, "unknown mode is requested\n");
+ err = -EINVAL;
+ break;
+ }
+
+ return err;
+}
+
+static int usb4604_probe(struct usb4604 *hub)
+{
+ struct device *dev = hub->dev;
+ struct device_node *np = dev->of_node;
+ struct gpio_desc *gpio;
+ u32 mode = USB4604_MODE_HUB;
+
+ gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(gpio))
+ return PTR_ERR(gpio);
+ hub->gpio_reset = gpio;
+
+ if (of_property_read_u32(np, "initial-mode", &hub->mode))
+ hub->mode = mode;
+
+ return usb4604_switch_mode(hub, hub->mode);
+}
+
+static int usb4604_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct usb4604 *hub;
+
+ hub = devm_kzalloc(&i2c->dev, sizeof(*hub), GFP_KERNEL);
+ if (!hub)
+ return -ENOMEM;
+
+ i2c_set_clientdata(i2c, hub);
+ hub->dev = &i2c->dev;
+
+ return usb4604_probe(hub);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int usb4604_i2c_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct usb4604 *hub = i2c_get_clientdata(client);
+
+ usb4604_switch_mode(hub, USB4604_MODE_STANDBY);
+
+ return 0;
+}
+
+static int usb4604_i2c_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct usb4604 *hub = i2c_get_clientdata(client);
+
+ usb4604_switch_mode(hub, hub->mode);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(usb4604_i2c_pm_ops, usb4604_i2c_suspend,
+ usb4604_i2c_resume);
+
+static const struct i2c_device_id usb4604_id[] = {
+ { "usb4604", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, usb4604_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id usb4604_of_match[] = {
+ { .compatible = "smsc,usb4604" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, usb4604_of_match);
+#endif
+
+static struct i2c_driver usb4604_i2c_driver = {
+ .driver = {
+ .name = "usb4604",
+ .pm = &usb4604_i2c_pm_ops,
+ .of_match_table = of_match_ptr(usb4604_of_match),
+ },
+ .probe = usb4604_i2c_probe,
+ .id_table = usb4604_id,
+};
+module_i2c_driver(usb4604_i2c_driver);
+
+MODULE_DESCRIPTION("USB4604 USB HUB driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index 1184390508e9..9f48419abc46 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -321,10 +321,8 @@ static int lcd_probe(struct usb_interface *interface,
/* allocate memory for our device state and initialize it */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
- if (dev == NULL) {
- dev_err(&interface->dev, "Out of memory\n");
+ if (!dev)
goto error;
- }
kref_init(&dev->kref);
sema_init(&dev->limit_sem, USB_LCD_CONCURRENT_WRITES);
init_usb_anchor(&dev->submitted);
@@ -351,11 +349,8 @@ static int lcd_probe(struct usb_interface *interface,
dev->bulk_in_size = buffer_size;
dev->bulk_in_endpointAddr = endpoint->bEndpointAddress;
dev->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
- if (!dev->bulk_in_buffer) {
- dev_err(&interface->dev,
- "Could not allocate bulk_in_buffer\n");
+ if (!dev->bulk_in_buffer)
goto error;
- }
}
if (!dev->bulk_out_endpointAddr &&
diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c
index 1fe6b73c22f3..a0ba5298160c 100644
--- a/drivers/usb/misc/usbsevseg.c
+++ b/drivers/usb/misc/usbsevseg.c
@@ -128,10 +128,8 @@ static void update_display_visual(struct usb_sevsegdev *mydev, gfp_t mf)
return;
buffer = kzalloc(MAXLEN, mf);
- if (!buffer) {
- dev_err(&mydev->udev->dev, "out of memory\n");
+ if (!buffer)
return;
- }
/* The device is right to left, where as you write left to right */
for (i = 0; i < mydev->textlength; i++)
@@ -346,10 +344,8 @@ static int sevseg_probe(struct usb_interface *interface,
int rc = -ENOMEM;
mydev = kzalloc(sizeof(struct usb_sevsegdev), GFP_KERNEL);
- if (mydev == NULL) {
- dev_err(&interface->dev, "Out of memory\n");
+ if (!mydev)
goto error_mem;
- }
mydev->udev = usb_get_dev(udev);
mydev->intf = interface;
diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c
index bbd029c9c725..356d312add57 100644
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -150,10 +150,8 @@ static struct uss720_async_request *submit_async_request(struct parport_uss720_p
if (!usbdev)
return NULL;
rq = kzalloc(sizeof(struct uss720_async_request), mem_flags);
- if (!rq) {
- dev_err(&usbdev->dev, "submit_async_request out of memory\n");
+ if (!rq)
return NULL;
- }
kref_init(&rq->ref_count);
INIT_LIST_HEAD(&rq->asynclist);
init_completion(&rq->compl);
@@ -162,7 +160,6 @@ static struct uss720_async_request *submit_async_request(struct parport_uss720_p
rq->urb = usb_alloc_urb(0, mem_flags);
if (!rq->urb) {
kref_put(&rq->ref_count, destroy_async);
- dev_err(&usbdev->dev, "submit_async_request out of memory\n");
return NULL;
}
rq->dr = kmalloc(sizeof(*rq->dr), mem_flags);
diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c
index 343fa6ff9f4b..54e53ac4c08f 100644
--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -200,10 +200,8 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_
/* allocate memory for our device state and initialize it */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
- if (!dev) {
- dev_err(&interface->dev, "Out of memory\n");
+ if (!dev)
goto error;
- }
kref_init(&dev->kref);
mutex_init(&dev->io_mutex);
spin_lock_init(&dev->lock);
@@ -231,17 +229,13 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_
/* allocate control URB */
dev->cntl_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!dev->cntl_urb) {
- dev_err(&interface->dev, "Could not allocate control URB\n");
+ if (!dev->cntl_urb)
goto error;
- }
/* allocate buffer for control req */
dev->cntl_req = kmalloc(YUREX_BUF_SIZE, GFP_KERNEL);
- if (!dev->cntl_req) {
- dev_err(&interface->dev, "Could not allocate cntl_req\n");
+ if (!dev->cntl_req)
goto error;
- }
/* allocate buffer for control msg */
dev->cntl_buffer = usb_alloc_coherent(dev->udev, YUREX_BUF_SIZE,
@@ -269,10 +263,8 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_
/* allocate interrupt URB */
dev->urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!dev->urb) {
- dev_err(&interface->dev, "Could not allocate URB\n");
+ if (!dev->urb)
goto error;
- }
/* allocate buffer for interrupt in */
dev->int_buffer = usb_alloc_coherent(dev->udev, YUREX_BUF_SIZE,
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 73cfa13fc0dc..72a2a5040848 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -82,7 +82,7 @@ config USB_MUSB_DA8XX
tristate "DA8xx/OMAP-L1x"
depends on ARCH_DAVINCI_DA8XX
depends on NOP_USB_XCEIV
- depends on BROKEN
+ select PHY_DA8XX_USB
config USB_MUSB_TUSB6010
tristate "TUSB6010"
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index c41fe588d14d..50ca8052bc8e 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -474,10 +474,8 @@ static int am35x_probe(struct platform_device *pdev)
int ret = -ENOMEM;
glue = kzalloc(sizeof(*glue), GFP_KERNEL);
- if (!glue) {
- dev_err(&pdev->dev, "failed to allocate glue context\n");
+ if (!glue)
goto err0;
- }
phy_clk = clk_get(&pdev->dev, "fck");
if (IS_ERR(phy_clk)) {
@@ -512,8 +510,10 @@ static int am35x_probe(struct platform_device *pdev)
pdata->platform_ops = &am35x_ops;
glue->phy = usb_phy_generic_register();
- if (IS_ERR(glue->phy))
+ if (IS_ERR(glue->phy)) {
+ ret = PTR_ERR(glue->phy);
goto err7;
+ }
platform_set_drvdata(pdev, glue);
pinfo = am35x_dev_info;
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index b03d3b867fca..210b7e43a6fd 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -30,13 +30,11 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/usb/usb_phy_generic.h>
-#include <mach/da8xx.h>
-#include <linux/platform_data/usb-davinci.h>
-
#include "musb_core.h"
/*
@@ -80,61 +78,15 @@
#define DA8XX_MENTOR_CORE_OFFSET 0x400
-#define CFGCHIP2 IO_ADDRESS(DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP2_REG)
-
struct da8xx_glue {
struct device *dev;
struct platform_device *musb;
- struct platform_device *phy;
+ struct platform_device *usb_phy;
struct clk *clk;
+ struct phy *phy;
};
/*
- * REVISIT (PM): we should be able to keep the PHY in low power mode most
- * of the time (24 MHz oscillator and PLL off, etc.) by setting POWER.D0
- * and, when in host mode, autosuspending idle root ports... PHY_PLLON
- * (overriding SUSPENDM?) then likely needs to stay off.
- */
-
-static inline void phy_on(void)
-{
- u32 cfgchip2 = __raw_readl(CFGCHIP2);
-
- /*
- * Start the on-chip PHY and its PLL.
- */
- cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN);
- cfgchip2 |= CFGCHIP2_PHY_PLLON;
- __raw_writel(cfgchip2, CFGCHIP2);
-
- pr_info("Waiting for USB PHY clock good...\n");
- while (!(__raw_readl(CFGCHIP2) & CFGCHIP2_PHYCLKGD))
- cpu_relax();
-}
-
-static inline void phy_off(void)
-{
- u32 cfgchip2 = __raw_readl(CFGCHIP2);
-
- /*
- * Ensure that USB 1.1 reference clock is not being sourced from
- * USB 2.0 PHY. Otherwise do not power down the PHY.
- */
- if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX) &&
- (cfgchip2 & CFGCHIP2_USB1SUSPENDM)) {
- pr_warning("USB 1.1 clocked from USB 2.0 PHY -- "
- "can't power it down\n");
- return;
- }
-
- /*
- * Power down the on-chip PHY.
- */
- cfgchip2 |= CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN;
- __raw_writel(cfgchip2, CFGCHIP2);
-}
-
-/*
* Because we don't set CTRL.UINT, it's "important" to:
* - not read/write INTRUSB/INTRUSBE (except during
* initial setup, as a workaround);
@@ -385,29 +337,29 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
static int da8xx_musb_set_mode(struct musb *musb, u8 musb_mode)
{
- u32 cfgchip2 = __raw_readl(CFGCHIP2);
+ struct da8xx_glue *glue = dev_get_drvdata(musb->controller->parent);
+ enum phy_mode phy_mode;
- cfgchip2 &= ~CFGCHIP2_OTGMODE;
switch (musb_mode) {
case MUSB_HOST: /* Force VBUS valid, ID = 0 */
- cfgchip2 |= CFGCHIP2_FORCE_HOST;
+ phy_mode = PHY_MODE_USB_HOST;
break;
case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */
- cfgchip2 |= CFGCHIP2_FORCE_DEVICE;
+ phy_mode = PHY_MODE_USB_DEVICE;
break;
case MUSB_OTG: /* Don't override the VBUS/ID comparators */
- cfgchip2 |= CFGCHIP2_NO_OVERRIDE;
+ phy_mode = PHY_MODE_USB_OTG;
break;
default:
- dev_dbg(musb->controller, "Trying to set unsupported mode %u\n", musb_mode);
+ return -EINVAL;
}
- __raw_writel(cfgchip2, CFGCHIP2);
- return 0;
+ return phy_set_mode(glue->phy, phy_mode);
}
static int da8xx_musb_init(struct musb *musb)
{
+ struct da8xx_glue *glue = dev_get_drvdata(musb->controller->parent);
void __iomem *reg_base = musb->ctrl_base;
u32 rev;
int ret = -ENODEV;
@@ -425,32 +377,56 @@ static int da8xx_musb_init(struct musb *musb)
goto fail;
}
+ ret = clk_prepare_enable(glue->clk);
+ if (ret) {
+ dev_err(glue->dev, "failed to enable clock\n");
+ goto fail;
+ }
+
setup_timer(&otg_workaround, otg_timer, (unsigned long)musb);
/* Reset the controller */
musb_writel(reg_base, DA8XX_USB_CTRL_REG, DA8XX_SOFT_RESET_MASK);
/* Start the on-chip PHY and its PLL. */
- phy_on();
+ ret = phy_init(glue->phy);
+ if (ret) {
+ dev_err(glue->dev, "Failed to init phy.\n");
+ goto err_phy_init;
+ }
+
+ ret = phy_power_on(glue->phy);
+ if (ret) {
+ dev_err(glue->dev, "Failed to power on phy.\n");
+ goto err_phy_power_on;
+ }
msleep(5);
/* NOTE: IRQs are in mixed mode, not bypass to pure MUSB */
- pr_debug("DA8xx OTG revision %08x, PHY %03x, control %02x\n",
- rev, __raw_readl(CFGCHIP2),
+ pr_debug("DA8xx OTG revision %08x, control %02x\n", rev,
musb_readb(reg_base, DA8XX_USB_CTRL_REG));
musb->isr = da8xx_musb_interrupt;
return 0;
+
+err_phy_power_on:
+ phy_exit(glue->phy);
+err_phy_init:
+ clk_disable_unprepare(glue->clk);
fail:
return ret;
}
static int da8xx_musb_exit(struct musb *musb)
{
+ struct da8xx_glue *glue = dev_get_drvdata(musb->controller->parent);
+
del_timer_sync(&otg_workaround);
- phy_off();
+ phy_power_off(glue->phy);
+ phy_exit(glue->phy);
+ clk_disable_unprepare(glue->clk);
usb_put_phy(musb->xceiv);
@@ -486,30 +462,25 @@ static int da8xx_probe(struct platform_device *pdev)
{
struct resource musb_resources[2];
struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
- struct platform_device *musb;
struct da8xx_glue *glue;
struct platform_device_info pinfo;
struct clk *clk;
+ int ret;
- int ret = -ENOMEM;
-
- glue = kzalloc(sizeof(*glue), GFP_KERNEL);
- if (!glue) {
- dev_err(&pdev->dev, "failed to allocate glue context\n");
- goto err0;
- }
+ glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
+ if (!glue)
+ return -ENOMEM;
- clk = clk_get(&pdev->dev, "usb20");
+ clk = devm_clk_get(&pdev->dev, "usb20");
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "failed to get clock\n");
- ret = PTR_ERR(clk);
- goto err3;
+ return PTR_ERR(clk);
}
- ret = clk_enable(clk);
- if (ret) {
- dev_err(&pdev->dev, "failed to enable clock\n");
- goto err4;
+ glue->phy = devm_phy_get(&pdev->dev, "usb-phy");
+ if (IS_ERR(glue->phy)) {
+ dev_err(&pdev->dev, "failed to get phy\n");
+ return PTR_ERR(glue->phy);
}
glue->dev = &pdev->dev;
@@ -517,10 +488,11 @@ static int da8xx_probe(struct platform_device *pdev)
pdata->platform_ops = &da8xx_ops;
- glue->phy = usb_phy_generic_register();
- if (IS_ERR(glue->phy)) {
- ret = PTR_ERR(glue->phy);
- goto err5;
+ glue->usb_phy = usb_phy_generic_register();
+ ret = PTR_ERR_OR_ZERO(glue->usb_phy);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register usb_phy\n");
+ return ret;
}
platform_set_drvdata(pdev, glue);
@@ -544,28 +516,13 @@ static int da8xx_probe(struct platform_device *pdev)
pinfo.data = pdata;
pinfo.size_data = sizeof(*pdata);
- glue->musb = musb = platform_device_register_full(&pinfo);
- if (IS_ERR(musb)) {
- ret = PTR_ERR(musb);
+ glue->musb = platform_device_register_full(&pinfo);
+ ret = PTR_ERR_OR_ZERO(glue->musb);
+ if (ret) {
dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
- goto err6;
+ usb_phy_generic_unregister(glue->usb_phy);
}
- return 0;
-
-err6:
- usb_phy_generic_unregister(glue->phy);
-
-err5:
- clk_disable(clk);
-
-err4:
- clk_put(clk);
-
-err3:
- kfree(glue);
-
-err0:
return ret;
}
@@ -574,10 +531,7 @@ static int da8xx_remove(struct platform_device *pdev)
struct da8xx_glue *glue = platform_get_drvdata(pdev);
platform_device_unregister(glue->musb);
- usb_phy_generic_unregister(glue->phy);
- clk_disable(glue->clk);
- clk_put(glue->clk);
- kfree(glue);
+ usb_phy_generic_unregister(glue->usb_phy);
return 0;
}
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 74fc3069cb42..27dadc0d9114 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1448,7 +1448,7 @@ static int musb_core_init(u16 musb_type, struct musb *musb)
{
u8 reg;
char *type;
- char aInfo[90], aRevision[32], aDate[12];
+ char aInfo[90];
void __iomem *mbase = musb->mregs;
int status = 0;
int i;
@@ -1482,7 +1482,6 @@ static int musb_core_init(u16 musb_type, struct musb *musb)
pr_debug("%s: ConfigData=0x%02x (%s)\n", musb_driver_name, reg, aInfo);
- aDate[0] = 0;
if (MUSB_CONTROLLER_MHDRC == musb_type) {
musb->is_multipoint = 1;
type = "M";
@@ -1497,11 +1496,10 @@ static int musb_core_init(u16 musb_type, struct musb *musb)
/* log release info */
musb->hwvers = musb_read_hwvers(mbase);
- snprintf(aRevision, 32, "%d.%d%s", MUSB_HWVERS_MAJOR(musb->hwvers),
- MUSB_HWVERS_MINOR(musb->hwvers),
- (musb->hwvers & MUSB_HWVERS_RC) ? "RC" : "");
- pr_debug("%s: %sHDRC RTL version %s %s\n",
- musb_driver_name, type, aRevision, aDate);
+ pr_debug("%s: %sHDRC RTL version %d.%d%s\n",
+ musb_driver_name, type, MUSB_HWVERS_MAJOR(musb->hwvers),
+ MUSB_HWVERS_MINOR(musb->hwvers),
+ (musb->hwvers & MUSB_HWVERS_RC) ? "RC" : "");
/* configure ep0 */
musb_configure_ep0(musb);
@@ -1831,11 +1829,80 @@ static const struct attribute_group musb_attr_group = {
.attrs = musb_attributes,
};
+#define MUSB_QUIRK_B_INVALID_VBUS_91 (MUSB_DEVCTL_BDEVICE | \
+ (2 << MUSB_DEVCTL_VBUS_SHIFT) | \
+ MUSB_DEVCTL_SESSION)
+#define MUSB_QUIRK_A_DISCONNECT_19 ((3 << MUSB_DEVCTL_VBUS_SHIFT) | \
+ MUSB_DEVCTL_SESSION)
+
+/*
+ * Check the musb devctl session bit to determine if we want to
+ * allow PM runtime for the device. In general, we want to keep things
+ * active when the session bit is set except after host disconnect.
+ *
+ * Only called from musb_irq_work. If this ever needs to get called
+ * elsewhere, proper locking must be implemented for musb->session.
+ */
+static void musb_pm_runtime_check_session(struct musb *musb)
+{
+ u8 devctl, s;
+ int error;
+
+ devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+ /* Handle session status quirks first */
+ s = MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV |
+ MUSB_DEVCTL_HR;
+ switch (devctl & ~s) {
+ case MUSB_QUIRK_B_INVALID_VBUS_91:
+ if (!musb->session && !musb->quirk_invalid_vbus) {
+ musb->quirk_invalid_vbus = true;
+ musb_dbg(musb,
+ "First invalid vbus, assume no session");
+ return;
+ }
+ break;
+ case MUSB_QUIRK_A_DISCONNECT_19:
+ if (!musb->session)
+ break;
+ musb_dbg(musb, "Allow PM on possible host mode disconnect");
+ pm_runtime_mark_last_busy(musb->controller);
+ pm_runtime_put_autosuspend(musb->controller);
+ musb->session = false;
+ return;
+ default:
+ break;
+ }
+
+ /* No need to do anything if session has not changed */
+ s = devctl & MUSB_DEVCTL_SESSION;
+ if (s == musb->session)
+ return;
+
+ /* Block PM or allow PM? */
+ if (s) {
+ musb_dbg(musb, "Block PM on active session: %02x", devctl);
+ error = pm_runtime_get_sync(musb->controller);
+ if (error < 0)
+ dev_err(musb->controller, "Could not enable: %i\n",
+ error);
+ } else {
+ musb_dbg(musb, "Allow PM with no session: %02x", devctl);
+ musb->quirk_invalid_vbus = false;
+ pm_runtime_mark_last_busy(musb->controller);
+ pm_runtime_put_autosuspend(musb->controller);
+ }
+
+ musb->session = s;
+}
+
/* Only used to provide driver mode change events */
static void musb_irq_work(struct work_struct *data)
{
struct musb *musb = container_of(data, struct musb, irq_work);
+ musb_pm_runtime_check_session(musb);
+
if (musb->xceiv->otg->state != musb->xceiv_old_state) {
musb->xceiv_old_state = musb->xceiv->otg->state;
sysfs_notify(&musb->controller->kobj, NULL, "mode");
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index b55a776b03eb..2cb88a498f8a 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -378,6 +378,8 @@ struct musb {
u8 min_power; /* vbus for periph, in mA/2 */
int port_mode; /* MUSB_PORT_MODE_* */
+ bool session;
+ bool quirk_invalid_vbus;
bool is_host;
int a_wait_bcon; /* VBUS timeout in msecs */
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 2537179636db..0f17d2140db6 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -145,43 +145,6 @@ static const struct debugfs_reg32 dsps_musb_regs[] = {
{ "mode", 0xe8 },
};
-static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout)
-{
- struct device *dev = musb->controller;
- struct dsps_glue *glue = dev_get_drvdata(dev->parent);
-
- if (timeout == 0)
- timeout = jiffies + msecs_to_jiffies(3);
-
- /* Never idle if active, or when VBUS timeout is not set as host */
- if (musb->is_active || (musb->a_wait_bcon == 0 &&
- musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON)) {
- dev_dbg(musb->controller, "%s active, deleting timer\n",
- usb_otg_state_string(musb->xceiv->otg->state));
- del_timer(&glue->timer);
- glue->last_timer = jiffies;
- return;
- }
- if (musb->port_mode != MUSB_PORT_MODE_DUAL_ROLE)
- return;
-
- if (!musb->g.dev.driver)
- return;
-
- if (time_after(glue->last_timer, timeout) &&
- timer_pending(&glue->timer)) {
- dev_dbg(musb->controller,
- "Longer idle timer already pending, ignoring...\n");
- return;
- }
- glue->last_timer = timeout;
-
- dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
- usb_otg_state_string(musb->xceiv->otg->state),
- jiffies_to_msecs(timeout - jiffies));
- mod_timer(&glue->timer, timeout);
-}
-
/**
* dsps_musb_enable - enable interrupts
*/
@@ -206,7 +169,6 @@ static void dsps_musb_enable(struct musb *musb)
musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
mod_timer(&glue->timer, jiffies +
msecs_to_jiffies(wrp->poll_timeout));
- dsps_musb_try_idle(musb, 0);
}
/**
@@ -236,6 +198,11 @@ static void otg_timer(unsigned long _musb)
u8 devctl;
unsigned long flags;
int skip_session = 0;
+ int err;
+
+ err = pm_runtime_get_sync(dev);
+ if (err < 0)
+ dev_err(dev, "Poll could not pm_runtime_get: %i\n", err);
/*
* We poll because DSPS IP's won't expose several OTG-critical
@@ -247,6 +214,10 @@ static void otg_timer(unsigned long _musb)
spin_lock_irqsave(&musb->lock, flags);
switch (musb->xceiv->otg->state) {
+ case OTG_STATE_A_WAIT_VRISE:
+ mod_timer(&glue->timer, jiffies +
+ msecs_to_jiffies(wrp->poll_timeout));
+ break;
case OTG_STATE_A_WAIT_BCON:
musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
skip_session = 1;
@@ -275,6 +246,9 @@ static void otg_timer(unsigned long _musb)
break;
}
spin_unlock_irqrestore(&musb->lock, flags);
+
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
}
static irqreturn_t dsps_interrupt(int irq, void *hci)
@@ -338,7 +312,8 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
MUSB_HST_MODE(musb);
musb->xceiv->otg->default_a = 1;
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
- del_timer(&glue->timer);
+ mod_timer(&glue->timer, jiffies +
+ msecs_to_jiffies(wrp->poll_timeout));
} else {
musb->is_active = 0;
MUSB_DEV_MODE(musb);
@@ -358,11 +333,17 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
if (musb->int_tx || musb->int_rx || musb->int_usb)
ret |= musb_interrupt(musb);
- /* Poll for ID change in OTG port mode */
- if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
- musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
+ /* Poll for ID change and connect */
+ switch (musb->xceiv->otg->state) {
+ case OTG_STATE_B_IDLE:
+ case OTG_STATE_A_WAIT_BCON:
mod_timer(&glue->timer, jiffies +
msecs_to_jiffies(wrp->poll_timeout));
+ break;
+ default:
+ break;
+ }
+
out:
spin_unlock_irqrestore(&musb->lock, flags);
@@ -461,6 +442,9 @@ static int dsps_musb_init(struct musb *musb)
musb_writeb(musb->mregs, MUSB_BABBLE_CTL, val);
}
+ mod_timer(&glue->timer, jiffies +
+ msecs_to_jiffies(glue->wrp->poll_timeout));
+
return dsps_musb_dbg_init(musb, glue);
}
@@ -620,7 +604,6 @@ static struct musb_platform_ops dsps_ops = {
.enable = dsps_musb_enable,
.disable = dsps_musb_disable,
- .try_idle = dsps_musb_try_idle,
.set_mode = dsps_musb_set_mode,
.recover = dsps_musb_recover,
};
@@ -784,6 +767,8 @@ static int dsps_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, glue);
pm_runtime_enable(&pdev->dev);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 200);
ret = pm_runtime_get_sync(&pdev->dev);
if (ret < 0) {
@@ -795,11 +780,15 @@ static int dsps_probe(struct platform_device *pdev)
if (ret)
goto err3;
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
+
return 0;
err3:
- pm_runtime_put(&pdev->dev);
+ pm_runtime_put_sync(&pdev->dev);
err2:
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return ret;
}
@@ -811,7 +800,8 @@ static int dsps_remove(struct platform_device *pdev)
platform_device_unregister(glue->musb);
/* disable usbss clocks */
- pm_runtime_put(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+ pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return 0;
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 6d1e975e9605..bff4869a57cd 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1964,6 +1964,9 @@ static int musb_gadget_stop(struct usb_gadget *g)
* that currently misbehaves.
*/
+ /* Force check of devctl register for PM runtime */
+ schedule_work(&musb->irq_work);
+
pm_runtime_mark_last_busy(musb->controller);
pm_runtime_put_autosuspend(musb->controller);
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index fe08e776fec3..61b5f1c3c5bc 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -245,6 +245,7 @@ void musb_root_disconnect(struct musb *musb)
usb_otg_state_string(musb->xceiv->otg->state));
}
}
+EXPORT_SYMBOL_GPL(musb_root_disconnect);
/*---------------------------------------------------------------------*/
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 0b4cec940386..1ab6973d4f61 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -49,9 +49,6 @@ struct omap2430_glue {
enum musb_vbus_id_status status;
struct work_struct omap_musb_mailbox_work;
struct device *control_otghs;
- bool cable_connected;
- bool enabled;
- bool powered;
};
#define glue_to_musb(g) platform_get_drvdata(g->musb)
@@ -141,45 +138,6 @@ static inline void omap2430_low_level_init(struct musb *musb)
musb_writel(musb->mregs, OTG_FORCESTDBY, l);
}
-/*
- * We can get multiple cable events so we need to keep track
- * of the power state. Only keep power enabled if USB cable is
- * connected and a gadget is started.
- */
-static void omap2430_set_power(struct musb *musb, bool enabled, bool cable)
-{
- struct device *dev = musb->controller;
- struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
- bool power_up;
- int res;
-
- if (glue->enabled != enabled)
- glue->enabled = enabled;
-
- if (glue->cable_connected != cable)
- glue->cable_connected = cable;
-
- power_up = glue->enabled && glue->cable_connected;
- if (power_up == glue->powered) {
- dev_warn(musb->controller, "power state already %i\n",
- power_up);
- return;
- }
-
- glue->powered = power_up;
-
- if (power_up) {
- res = pm_runtime_get_sync(musb->controller);
- if (res < 0) {
- dev_err(musb->controller, "could not enable: %i", res);
- glue->powered = false;
- }
- } else {
- pm_runtime_mark_last_busy(musb->controller);
- pm_runtime_put_autosuspend(musb->controller);
- }
-}
-
static int omap2430_musb_mailbox(enum musb_vbus_id_status status)
{
struct omap2430_glue *glue = _glue;
@@ -203,21 +161,15 @@ static int omap2430_musb_mailbox(enum musb_vbus_id_status status)
static void omap_musb_set_mailbox(struct omap2430_glue *glue)
{
struct musb *musb = glue_to_musb(glue);
- struct device *dev = musb->controller;
- struct musb_hdrc_platform_data *pdata = dev_get_platdata(dev);
+ struct musb_hdrc_platform_data *pdata =
+ dev_get_platdata(musb->controller);
struct omap_musb_board_data *data = pdata->board_data;
struct usb_otg *otg = musb->xceiv->otg;
- bool cable_connected;
-
- cable_connected = ((glue->status == MUSB_ID_GROUND) ||
- (glue->status == MUSB_VBUS_VALID));
-
- if (cable_connected)
- omap2430_set_power(musb, glue->enabled, cable_connected);
+ pm_runtime_get_sync(musb->controller);
switch (glue->status) {
case MUSB_ID_GROUND:
- dev_dbg(dev, "ID GND\n");
+ dev_dbg(musb->controller, "ID GND\n");
otg->default_a = true;
musb->xceiv->otg->state = OTG_STATE_A_IDLE;
@@ -230,7 +182,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
break;
case MUSB_VBUS_VALID:
- dev_dbg(dev, "VBUS Connect\n");
+ dev_dbg(musb->controller, "VBUS Connect\n");
otg->default_a = false;
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
@@ -240,7 +192,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
case MUSB_ID_FLOAT:
case MUSB_VBUS_OFF:
- dev_dbg(dev, "VBUS Disconnect\n");
+ dev_dbg(musb->controller, "VBUS Disconnect\n");
musb->xceiv->last_event = USB_EVENT_NONE;
if (musb->gadget_driver)
@@ -253,12 +205,10 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
USB_MODE_DISCONNECT);
break;
default:
- dev_dbg(dev, "ID float\n");
+ dev_dbg(musb->controller, "ID float\n");
}
-
- if (!cable_connected)
- omap2430_set_power(musb, glue->enabled, cable_connected);
-
+ pm_runtime_mark_last_busy(musb->controller);
+ pm_runtime_put_autosuspend(musb->controller);
atomic_notifier_call_chain(&musb->xceiv->notifier,
musb->xceiv->last_event, NULL);
}
@@ -376,8 +326,6 @@ static void omap2430_musb_enable(struct musb *musb)
if (!WARN_ON(!musb->phy))
phy_power_on(musb->phy);
- omap2430_set_power(musb, true, glue->cable_connected);
-
switch (glue->status) {
case MUSB_ID_GROUND:
@@ -419,8 +367,6 @@ static void omap2430_musb_disable(struct musb *musb)
if (glue->status != MUSB_UNKNOWN)
omap_control_usb_set_mode(glue->control_otghs,
USB_MODE_DISCONNECT);
-
- omap2430_set_power(musb, false, glue->cable_connected);
}
static int omap2430_musb_exit(struct musb *musb)
@@ -571,7 +517,7 @@ static int omap2430_probe(struct platform_device *pdev)
pm_runtime_enable(glue->dev);
pm_runtime_use_autosuspend(glue->dev);
- pm_runtime_set_autosuspend_delay(glue->dev, 500);
+ pm_runtime_set_autosuspend_delay(glue->dev, 100);
ret = platform_device_add(musb);
if (ret) {
@@ -591,11 +537,9 @@ err0:
static int omap2430_remove(struct platform_device *pdev)
{
struct omap2430_glue *glue = platform_get_drvdata(pdev);
- struct musb *musb = glue_to_musb(glue);
pm_runtime_get_sync(glue->dev);
platform_device_unregister(glue->musb);
- omap2430_set_power(musb, false, false);
pm_runtime_put_sync(glue->dev);
pm_runtime_dont_use_autosuspend(glue->dev);
pm_runtime_disable(glue->dev);
diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
index c6ee16660572..1408245be18e 100644
--- a/drivers/usb/musb/sunxi.c
+++ b/drivers/usb/musb/sunxi.c
@@ -74,6 +74,7 @@
#define SUNXI_MUSB_FL_HAS_SRAM 5
#define SUNXI_MUSB_FL_HAS_RESET 6
#define SUNXI_MUSB_FL_NO_CONFIGDATA 7
+#define SUNXI_MUSB_FL_PHY_MODE_PEND 8
/* Our read/write methods need access and do not get passed in a musb ref :| */
static struct musb *sunxi_musb;
@@ -87,6 +88,7 @@ struct sunxi_glue {
struct phy *phy;
struct platform_device *usb_phy;
struct usb_phy *xceiv;
+ enum phy_mode phy_mode;
unsigned long flags;
struct work_struct work;
struct extcon_dev *extcon;
@@ -140,6 +142,9 @@ static void sunxi_musb_work(struct work_struct *work)
clear_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags);
}
}
+
+ if (test_and_clear_bit(SUNXI_MUSB_FL_PHY_MODE_PEND, &glue->flags))
+ phy_set_mode(glue->phy, glue->phy_mode);
}
static void sunxi_musb_set_vbus(struct musb *musb, int is_on)
@@ -341,6 +346,50 @@ static void sunxi_musb_dma_controller_destroy(struct dma_controller *c)
{
}
+static int sunxi_musb_set_mode(struct musb *musb, u8 mode)
+{
+ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
+ enum phy_mode new_mode;
+
+ switch (mode) {
+ case MUSB_HOST:
+ new_mode = PHY_MODE_USB_HOST;
+ break;
+ case MUSB_PERIPHERAL:
+ new_mode = PHY_MODE_USB_DEVICE;
+ break;
+ case MUSB_OTG:
+ new_mode = PHY_MODE_USB_OTG;
+ break;
+ default:
+ dev_err(musb->controller->parent,
+ "Error requested mode not supported by this kernel\n");
+ return -EINVAL;
+ }
+
+ if (glue->phy_mode == new_mode)
+ return 0;
+
+ if (musb->port_mode != MUSB_PORT_MODE_DUAL_ROLE) {
+ dev_err(musb->controller->parent,
+ "Error changing modes is only supported in dual role mode\n");
+ return -EINVAL;
+ }
+
+ if (musb->port1_status & USB_PORT_STAT_ENABLE)
+ musb_root_disconnect(musb);
+
+ /*
+ * phy_set_mode may sleep, and we're called with a spinlock held,
+ * so let sunxi_musb_work deal with it.
+ */
+ glue->phy_mode = new_mode;
+ set_bit(SUNXI_MUSB_FL_PHY_MODE_PEND, &glue->flags);
+ schedule_work(&glue->work);
+
+ return 0;
+}
+
/*
* sunxi musb register layout
* 0x00 - 0x17 fifo regs, 1 long per fifo
@@ -568,6 +617,7 @@ static const struct musb_platform_ops sunxi_musb_ops = {
.writew = sunxi_musb_writew,
.dma_init = sunxi_musb_dma_controller_create,
.dma_exit = sunxi_musb_dma_controller_destroy,
+ .set_mode = sunxi_musb_set_mode,
.set_vbus = sunxi_musb_set_vbus,
.pre_root_reset_end = sunxi_musb_pre_root_reset_end,
.post_root_reset_end = sunxi_musb_post_root_reset_end,
@@ -614,21 +664,28 @@ static int sunxi_musb_probe(struct platform_device *pdev)
return -EINVAL;
}
+ glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
+ if (!glue)
+ return -ENOMEM;
+
memset(&pdata, 0, sizeof(pdata));
switch (usb_get_dr_mode(&pdev->dev)) {
#if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_HOST
case USB_DR_MODE_HOST:
pdata.mode = MUSB_PORT_MODE_HOST;
+ glue->phy_mode = PHY_MODE_USB_HOST;
break;
#endif
#if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_GADGET
case USB_DR_MODE_PERIPHERAL:
pdata.mode = MUSB_PORT_MODE_GADGET;
+ glue->phy_mode = PHY_MODE_USB_DEVICE;
break;
#endif
#ifdef CONFIG_USB_MUSB_DUAL_ROLE
case USB_DR_MODE_OTG:
pdata.mode = MUSB_PORT_MODE_DUAL_ROLE;
+ glue->phy_mode = PHY_MODE_USB_OTG;
break;
#endif
default:
@@ -638,10 +695,6 @@ static int sunxi_musb_probe(struct platform_device *pdev)
pdata.platform_ops = &sunxi_musb_ops;
pdata.config = &sunxi_musb_hdrc_config;
- glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
- if (!glue)
- return -ENOMEM;
-
glue->dev = &pdev->dev;
INIT_WORK(&glue->work, sunxi_musb_work);
glue->host_nb.notifier_call = sunxi_musb_host_notifier;
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index 0c912d3950a5..a03caf4b1327 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -1248,7 +1248,7 @@ static void ab8500_usb_set_ab8500_tuning_values(struct ab8500_usb *ab)
err = abx500_set_register_interruptible(ab->dev,
AB8500_DEBUG, AB8500_USB_PHY_TUNE3, 0x78);
if (err < 0)
- dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n",
+ dev_err(ab->dev, "Failed to set PHY_TUNE3 register err=%d\n",
err);
/* Switch to normal mode/disable Bank 0x12 access */
@@ -1290,7 +1290,7 @@ static void ab8500_usb_set_ab8505_tuning_values(struct ab8500_usb *ab)
0xFC, 0x80);
if (err < 0)
- dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n",
+ dev_err(ab->dev, "Failed to set PHY_TUNE3 register err=%d\n",
err);
/* Switch to normal mode/disable Bank 0x12 access */
@@ -1321,7 +1321,7 @@ static void ab8500_usb_set_ab8540_tuning_values(struct ab8500_usb *ab)
err = abx500_set_register_interruptible(ab->dev,
AB8540_DEBUG, AB8500_USB_PHY_TUNE3, 0x90);
if (err < 0)
- dev_err(ab->dev, "Failed to set PHY_TUNE3 regester ret=%d\n",
+ dev_err(ab->dev, "Failed to set PHY_TUNE3 register ret=%d\n",
err);
}
@@ -1351,7 +1351,7 @@ static void ab8500_usb_set_ab9540_tuning_values(struct ab8500_usb *ab)
err = abx500_set_register_interruptible(ab->dev,
AB8500_DEBUG, AB8500_USB_PHY_TUNE3, 0x80);
if (err < 0)
- dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n",
+ dev_err(ab->dev, "Failed to set PHY_TUNE3 register err=%d\n",
err);
/* Switch to normal mode/disable Bank 0x12 access */
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index 427efb5eebae..8311ba2968cd 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -118,8 +118,6 @@ static irqreturn_t nop_gpio_vbus_thread(int irq, void *data)
status = USB_EVENT_VBUS;
otg->state = OTG_STATE_B_PERIPHERAL;
nop->phy.last_event = status;
- if (otg->gadget)
- usb_gadget_vbus_connect(otg->gadget);
/* drawing a "unit load" is *always* OK, except for OTG */
nop_set_vbus_draw(nop, 100);
@@ -129,8 +127,6 @@ static irqreturn_t nop_gpio_vbus_thread(int irq, void *data)
} else {
nop_set_vbus_draw(nop, 0);
- if (otg->gadget)
- usb_gadget_vbus_disconnect(otg->gadget);
status = USB_EVENT_NONE;
otg->state = OTG_STATE_B_IDLE;
nop->phy.last_event = status;
@@ -191,7 +187,8 @@ static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
otg->gadget = gadget;
if (otg->state == OTG_STATE_B_PERIPHERAL)
- usb_gadget_vbus_connect(gadget);
+ atomic_notifier_call_chain(&otg->usb_phy->notifier,
+ USB_EVENT_VBUS, otg->gadget);
else
otg->state = OTG_STATE_B_IDLE;
return 0;
@@ -326,6 +323,8 @@ static int usb_phy_generic_probe(struct platform_device *pdev)
gpiod_to_irq(nop->gpiod_vbus), err);
return err;
}
+ nop->phy.otg->state = gpiod_get_value(nop->gpiod_vbus) ?
+ OTG_STATE_B_PERIPHERAL : OTG_STATE_B_IDLE;
}
nop->phy.init = usb_gen_phy_init;
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index 00bfea01be65..0e2f1a36d315 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -27,6 +27,7 @@
#define DRIVER_NAME "mxs_phy"
#define HW_USBPHY_PWD 0x00
+#define HW_USBPHY_TX 0x10
#define HW_USBPHY_CTRL 0x30
#define HW_USBPHY_CTRL_SET 0x34
#define HW_USBPHY_CTRL_CLR 0x38
@@ -38,6 +39,10 @@
#define HW_USBPHY_IP_SET 0x94
#define HW_USBPHY_IP_CLR 0x98
+#define GM_USBPHY_TX_TXCAL45DP(x) (((x) & 0xf) << 16)
+#define GM_USBPHY_TX_TXCAL45DN(x) (((x) & 0xf) << 8)
+#define GM_USBPHY_TX_D_CAL(x) (((x) & 0xf) << 0)
+
#define BM_USBPHY_CTRL_SFTRST BIT(31)
#define BM_USBPHY_CTRL_CLKGATE BIT(30)
#define BM_USBPHY_CTRL_OTG_ID_VALUE BIT(27)
@@ -115,6 +120,12 @@
*/
#define MXS_PHY_NEED_IP_FIX BIT(3)
+/* Minimum and maximum values for device tree entries */
+#define MXS_PHY_TX_CAL45_MIN 30
+#define MXS_PHY_TX_CAL45_MAX 55
+#define MXS_PHY_TX_D_CAL_MIN 79
+#define MXS_PHY_TX_D_CAL_MAX 119
+
struct mxs_phy_data {
unsigned int flags;
};
@@ -164,6 +175,8 @@ struct mxs_phy {
const struct mxs_phy_data *data;
struct regmap *regmap_anatop;
int port_id;
+ u32 tx_reg_set;
+ u32 tx_reg_mask;
};
static inline bool is_imx6q_phy(struct mxs_phy *mxs_phy)
@@ -185,6 +198,20 @@ static void mxs_phy_clock_switch_delay(void)
usleep_range(300, 400);
}
+static void mxs_phy_tx_init(struct mxs_phy *mxs_phy)
+{
+ void __iomem *base = mxs_phy->phy.io_priv;
+ u32 phytx;
+
+ /* Update TX register if there is anything to write */
+ if (mxs_phy->tx_reg_mask) {
+ phytx = readl(base + HW_USBPHY_TX);
+ phytx &= ~mxs_phy->tx_reg_mask;
+ phytx |= mxs_phy->tx_reg_set;
+ writel(phytx, base + HW_USBPHY_TX);
+ }
+}
+
static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
{
int ret;
@@ -214,6 +241,8 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
if (mxs_phy->data->flags & MXS_PHY_NEED_IP_FIX)
writel(BM_USBPHY_IP_FIX, base + HW_USBPHY_IP_SET);
+ mxs_phy_tx_init(mxs_phy);
+
return 0;
}
@@ -459,6 +488,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
int ret;
const struct of_device_id *of_id;
struct device_node *np = pdev->dev.of_node;
+ u32 val;
of_id = of_match_device(mxs_phy_dt_ids, &pdev->dev);
if (!of_id)
@@ -491,6 +521,37 @@ static int mxs_phy_probe(struct platform_device *pdev)
}
}
+ /* Precompute which bits of the TX register are to be updated, if any */
+ if (!of_property_read_u32(np, "fsl,tx-cal-45-dn-ohms", &val) &&
+ val >= MXS_PHY_TX_CAL45_MIN && val <= MXS_PHY_TX_CAL45_MAX) {
+ /* Scale to a 4-bit value */
+ val = (MXS_PHY_TX_CAL45_MAX - val) * 0xF
+ / (MXS_PHY_TX_CAL45_MAX - MXS_PHY_TX_CAL45_MIN);
+ mxs_phy->tx_reg_mask |= GM_USBPHY_TX_TXCAL45DN(~0);
+ mxs_phy->tx_reg_set |= GM_USBPHY_TX_TXCAL45DN(val);
+ }
+
+ if (!of_property_read_u32(np, "fsl,tx-cal-45-dp-ohms", &val) &&
+ val >= MXS_PHY_TX_CAL45_MIN && val <= MXS_PHY_TX_CAL45_MAX) {
+ /* Scale to a 4-bit value. */
+ val = (MXS_PHY_TX_CAL45_MAX - val) * 0xF
+ / (MXS_PHY_TX_CAL45_MAX - MXS_PHY_TX_CAL45_MIN);
+ mxs_phy->tx_reg_mask |= GM_USBPHY_TX_TXCAL45DP(~0);
+ mxs_phy->tx_reg_set |= GM_USBPHY_TX_TXCAL45DP(val);
+ }
+
+ if (!of_property_read_u32(np, "fsl,tx-d-cal", &val) &&
+ val >= MXS_PHY_TX_D_CAL_MIN && val <= MXS_PHY_TX_D_CAL_MAX) {
+ /* Scale to a 4-bit value. Round up the values and heavily
+ * weight the rounding by adding 2/3 of the denominator.
+ */
+ val = ((MXS_PHY_TX_D_CAL_MAX - val) * 0xF
+ + (MXS_PHY_TX_D_CAL_MAX - MXS_PHY_TX_D_CAL_MIN) * 2/3)
+ / (MXS_PHY_TX_D_CAL_MAX - MXS_PHY_TX_D_CAL_MIN);
+ mxs_phy->tx_reg_mask |= GM_USBPHY_TX_D_CAL(~0);
+ mxs_phy->tx_reg_set |= GM_USBPHY_TX_D_CAL(val);
+ }
+
ret = of_alias_get_id(np, "usbphy");
if (ret < 0)
dev_dbg(&pdev->dev, "failed to get alias id, errno %d\n", ret);
diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
index ac67bab9124c..012a37aa3e0d 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -482,6 +482,10 @@ static const struct of_device_id usbhs_of_match[] = {
.data = (void *)USBHS_TYPE_RCAR_GEN3,
},
{
+ .compatible = "renesas,usbhs-r8a7796",
+ .data = (void *)USBHS_TYPE_RCAR_GEN3,
+ },
+ {
.compatible = "renesas,rcar-gen2-usbhs",
.data = (void *)USBHS_TYPE_RCAR_GEN2,
},
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index c4c64740a3e7..5bc7a6138855 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -335,7 +335,6 @@ static void __usbhsg_recip_send_status(struct usbhsg_gpriv *gpriv,
buf = kmalloc(sizeof(*buf), GFP_ATOMIC);
if (!buf) {
usb_ep_free_request(&dcp->ep, req);
- dev_err(dev, "recip data allocation fail\n");
return;
}
@@ -1062,14 +1061,11 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv)
int ret;
gpriv = kzalloc(sizeof(struct usbhsg_gpriv), GFP_KERNEL);
- if (!gpriv) {
- dev_err(dev, "Could not allocate gadget priv\n");
+ if (!gpriv)
return -ENOMEM;
- }
uep = kzalloc(sizeof(struct usbhsg_uep) * pipe_size, GFP_KERNEL);
if (!uep) {
- dev_err(dev, "Could not allocate ep\n");
ret = -ENOMEM;
goto usbhs_mod_gadget_probe_err_gpriv;
}
@@ -1106,6 +1102,8 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv)
gpriv->gadget.name = "renesas_usbhs_udc";
gpriv->gadget.ops = &usbhsg_gadget_ops;
gpriv->gadget.max_speed = USB_SPEED_HIGH;
+ gpriv->gadget.quirk_avoids_skb_reserve = usbhs_get_dparam(priv,
+ has_usb_dmac);
INIT_LIST_HEAD(&gpriv->gadget.ep_list);
diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c
index 3bf0b72eb359..165e81bfd93a 100644
--- a/drivers/usb/renesas_usbhs/mod_host.c
+++ b/drivers/usb/renesas_usbhs/mod_host.c
@@ -166,14 +166,10 @@ static struct usbhsh_request *usbhsh_ureq_alloc(struct usbhsh_hpriv *hpriv,
gfp_t mem_flags)
{
struct usbhsh_request *ureq;
- struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
- struct device *dev = usbhs_priv_to_dev(priv);
ureq = kzalloc(sizeof(struct usbhsh_request), mem_flags);
- if (!ureq) {
- dev_err(dev, "ureq alloc fail\n");
+ if (!ureq)
return NULL;
- }
usbhs_pkt_init(&ureq->pkt);
ureq->urb = urb;
@@ -388,10 +384,8 @@ static int usbhsh_endpoint_attach(struct usbhsh_hpriv *hpriv,
unsigned long flags;
uep = kzalloc(sizeof(struct usbhsh_ep), mem_flags);
- if (!uep) {
- dev_err(dev, "usbhsh_ep alloc fail\n");
+ if (!uep)
return -ENOMEM;
- }
/******************** spin lock ********************/
usbhs_lock(priv, flags);
diff --git a/drivers/usb/renesas_usbhs/pipe.c b/drivers/usb/renesas_usbhs/pipe.c
index c238772b9e9e..9396a8c14af8 100644
--- a/drivers/usb/renesas_usbhs/pipe.c
+++ b/drivers/usb/renesas_usbhs/pipe.c
@@ -804,10 +804,8 @@ int usbhs_pipe_probe(struct usbhs_priv *priv)
}
info->pipe = kzalloc(sizeof(struct usbhs_pipe) * pipe_size, GFP_KERNEL);
- if (!info->pipe) {
- dev_err(dev, "Could not allocate pipe\n");
+ if (!info->pipe)
return -ENOMEM;
- }
info->size = pipe_size;
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 4d6a5c672a3d..54a4de0efdba 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -118,6 +118,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
{ USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
+ { USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */
{ USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
{ USB_DEVICE(0x10C4, 0x84B6) }, /* Starizona Hyperion */
{ USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 4f7e072e4e00..e49ad0c63ad8 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -30,12 +30,12 @@
#include <linux/usb/ezusb.h>
/* make a simple define to handle if we are compiling keyspan_pda or xircom support */
-#if defined(CONFIG_USB_SERIAL_KEYSPAN_PDA) || defined(CONFIG_USB_SERIAL_KEYSPAN_PDA_MODULE)
+#if IS_ENABLED(CONFIG_USB_SERIAL_KEYSPAN_PDA)
#define KEYSPAN
#else
#undef KEYSPAN
#endif
-#if defined(CONFIG_USB_SERIAL_XIRCOM) || defined(CONFIG_USB_SERIAL_XIRCOM_MODULE)
+#if IS_ENABLED(CONFIG_USB_SERIAL_XIRCOM)
#define XIRCOM
#else
#undef XIRCOM
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 07b4bf01061d..a8b9bdba314f 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -179,23 +179,23 @@
/* Config struct */
struct ti_uart_config {
- __u16 wBaudRate;
- __u16 wFlags;
- __u8 bDataBits;
- __u8 bParity;
- __u8 bStopBits;
+ __be16 wBaudRate;
+ __be16 wFlags;
+ u8 bDataBits;
+ u8 bParity;
+ u8 bStopBits;
char cXon;
char cXoff;
- __u8 bUartMode;
+ u8 bUartMode;
} __packed;
/* Get port status */
struct ti_port_status {
- __u8 bCmdCode;
- __u8 bModuleId;
- __u8 bErrorCode;
- __u8 bMSR;
- __u8 bLSR;
+ u8 bCmdCode;
+ u8 bModuleId;
+ u8 bErrorCode;
+ u8 bMSR;
+ u8 bLSR;
} __packed;
/* Purge modes */
@@ -218,12 +218,12 @@ struct ti_port_status {
#define TI_RW_DATA_DOUBLE_WORD 0x04
struct ti_write_data_bytes {
- __u8 bAddrType;
- __u8 bDataType;
- __u8 bDataCounter;
+ u8 bAddrType;
+ u8 bDataType;
+ u8 bDataCounter;
__be16 wBaseAddrHi;
__be16 wBaseAddrLo;
- __u8 bData[0];
+ u8 bData[0];
} __packed;
struct ti_read_data_request {
@@ -258,7 +258,7 @@ struct ti_interrupt {
/* Firmware image header */
struct ti_firmware_header {
__le16 wLength;
- __u8 bCheckSum;
+ u8 bCheckSum;
} __packed;
/* UART addresses */
@@ -276,9 +276,6 @@ struct ti_firmware_header {
#define TI_DEFAULT_CLOSING_WAIT 4000 /* in .01 secs */
-/* supported setserial flags */
-#define TI_SET_SERIAL_FLAGS 0
-
/* read urb states */
#define TI_READ_URB_RUNNING 0
#define TI_READ_URB_STOPPING 1
@@ -288,11 +285,10 @@ struct ti_firmware_header {
struct ti_port {
int tp_is_open;
- __u8 tp_msr;
- __u8 tp_shadow_mcr;
- __u8 tp_uart_mode; /* 232 or 485 modes */
+ u8 tp_msr;
+ u8 tp_shadow_mcr;
+ u8 tp_uart_mode; /* 232 or 485 modes */
unsigned int tp_uart_base_addr;
- int tp_flags;
struct ti_device *tp_tdev;
struct usb_serial_port *tp_port;
spinlock_t tp_lock;
@@ -306,7 +302,6 @@ struct ti_device {
struct usb_serial *td_serial;
int td_is_3410;
bool td_rs485_only;
- int td_urb_error;
};
static int ti_startup(struct usb_serial *serial);
@@ -343,7 +338,7 @@ static int ti_get_serial_info(struct ti_port *tport,
struct serial_struct __user *ret_arg);
static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport,
struct serial_struct __user *new_arg);
-static void ti_handle_new_msr(struct ti_port *tport, __u8 msr);
+static void ti_handle_new_msr(struct ti_port *tport, u8 msr);
static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty);
static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty);
@@ -354,7 +349,7 @@ static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
__u16 moduleid, __u16 value, __u8 *data, int size);
static int ti_write_byte(struct usb_serial_port *port, struct ti_device *tdev,
- unsigned long addr, __u8 mask, __u8 byte);
+ unsigned long addr, u8 mask, u8 byte);
static int ti_download_firmware(struct ti_device *tdev);
@@ -647,12 +642,11 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
struct urb *urb;
int port_number;
int status;
- __u16 open_settings = (__u8)(TI_PIPE_MODE_CONTINUOUS |
- TI_PIPE_TIMEOUT_ENABLE |
- (TI_TRANSFER_TIMEOUT << 2));
+ u16 open_settings;
- if (tport == NULL)
- return -ENODEV;
+ open_settings = (TI_PIPE_MODE_CONTINUOUS |
+ TI_PIPE_TIMEOUT_ENABLE |
+ (TI_TRANSFER_TIMEOUT << 2));
dev = port->serial->dev;
tdev = tport->tp_tdev;
@@ -686,7 +680,6 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
if (tty)
ti_set_termios(tty, port, &tty->termios);
- dev_dbg(&port->dev, "%s - sending TI_OPEN_PORT\n", __func__);
status = ti_command_out_sync(tdev, TI_OPEN_PORT,
(__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
if (status) {
@@ -695,7 +688,6 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
goto unlink_int_urb;
}
- dev_dbg(&port->dev, "%s - sending TI_START_PORT\n", __func__);
status = ti_command_out_sync(tdev, TI_START_PORT,
(__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
if (status) {
@@ -704,7 +696,6 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
goto unlink_int_urb;
}
- dev_dbg(&port->dev, "%s - sending TI_PURGE_PORT\n", __func__);
status = ti_command_out_sync(tdev, TI_PURGE_PORT,
(__u8)(TI_UART1_PORT + port_number), TI_PURGE_INPUT, NULL, 0);
if (status) {
@@ -728,7 +719,6 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
if (tty)
ti_set_termios(tty, port, &tty->termios);
- dev_dbg(&port->dev, "%s - sending TI_OPEN_PORT (2)\n", __func__);
status = ti_command_out_sync(tdev, TI_OPEN_PORT,
(__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
if (status) {
@@ -737,7 +727,6 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
goto unlink_int_urb;
}
- dev_dbg(&port->dev, "%s - sending TI_START_PORT (2)\n", __func__);
status = ti_command_out_sync(tdev, TI_START_PORT,
(__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
if (status) {
@@ -747,7 +736,6 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
}
/* start read urb */
- dev_dbg(&port->dev, "%s - start read urb\n", __func__);
urb = port->read_urb;
if (!urb) {
dev_err(&port->dev, "%s - no read urb\n", __func__);
@@ -773,7 +761,6 @@ unlink_int_urb:
usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
release_lock:
mutex_unlock(&tdev->td_open_close_lock);
- dev_dbg(&port->dev, "%s - exit %d\n", __func__, status);
return status;
}
@@ -789,8 +776,6 @@ static void ti_close(struct usb_serial_port *port)
tdev = usb_get_serial_data(port->serial);
tport = usb_get_serial_port_data(port);
- if (tdev == NULL || tport == NULL)
- return;
tport->tp_is_open = 0;
@@ -803,7 +788,6 @@ static void ti_close(struct usb_serial_port *port)
port_number = port->port_number;
- dev_dbg(&port->dev, "%s - sending TI_CLOSE_PORT\n", __func__);
status = ti_command_out_sync(tdev, TI_CLOSE_PORT,
(__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
if (status)
@@ -830,11 +814,10 @@ static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
struct ti_port *tport = usb_get_serial_port_data(port);
if (count == 0) {
- dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__);
return 0;
}
- if (tport == NULL || !tport->tp_is_open)
+ if (!tport->tp_is_open)
return -ENODEV;
count = kfifo_in_locked(&port->write_fifo, data, count,
@@ -852,9 +835,6 @@ static int ti_write_room(struct tty_struct *tty)
int room = 0;
unsigned long flags;
- if (tport == NULL)
- return 0;
-
spin_lock_irqsave(&tport->tp_lock, flags);
room = kfifo_avail(&port->write_fifo);
spin_unlock_irqrestore(&tport->tp_lock, flags);
@@ -871,9 +851,6 @@ static int ti_chars_in_buffer(struct tty_struct *tty)
int chars = 0;
unsigned long flags;
- if (tport == NULL)
- return 0;
-
spin_lock_irqsave(&tport->tp_lock, flags);
chars = kfifo_len(&port->write_fifo);
spin_unlock_irqrestore(&tport->tp_lock, flags);
@@ -900,9 +877,6 @@ static void ti_throttle(struct tty_struct *tty)
struct usb_serial_port *port = tty->driver_data;
struct ti_port *tport = usb_get_serial_port_data(port);
- if (tport == NULL)
- return;
-
if (I_IXOFF(tty) || C_CRTSCTS(tty))
ti_stop_read(tport, tty);
@@ -915,9 +889,6 @@ static void ti_unthrottle(struct tty_struct *tty)
struct ti_port *tport = usb_get_serial_port_data(port);
int status;
- if (tport == NULL)
- return;
-
if (I_IXOFF(tty) || C_CRTSCTS(tty)) {
status = ti_restart_read(tport, tty);
if (status)
@@ -932,16 +903,11 @@ static int ti_ioctl(struct tty_struct *tty,
struct usb_serial_port *port = tty->driver_data;
struct ti_port *tport = usb_get_serial_port_data(port);
- if (tport == NULL)
- return -ENODEV;
-
switch (cmd) {
case TIOCGSERIAL:
- dev_dbg(&port->dev, "%s - TIOCGSERIAL\n", __func__);
return ti_get_serial_info(tport,
(struct serial_struct __user *)arg);
case TIOCSSERIAL:
- dev_dbg(&port->dev, "%s - TIOCSSERIAL\n", __func__);
return ti_set_serial_info(tty, tport,
(struct serial_struct __user *)arg);
}
@@ -959,6 +925,8 @@ static void ti_set_termios(struct tty_struct *tty,
int status;
int port_number = port->port_number;
unsigned int mcr;
+ u16 wbaudrate;
+ u16 wflags = 0;
cflag = tty->termios.c_cflag;
iflag = tty->termios.c_iflag;
@@ -967,21 +935,16 @@ static void ti_set_termios(struct tty_struct *tty,
dev_dbg(&port->dev, "%s - old clfag %08x, old iflag %08x\n", __func__,
old_termios->c_cflag, old_termios->c_iflag);
- if (tport == NULL)
- return;
-
config = kmalloc(sizeof(*config), GFP_KERNEL);
if (!config)
return;
- config->wFlags = 0;
-
/* these flags must be set */
- config->wFlags |= TI_UART_ENABLE_MS_INTS;
- config->wFlags |= TI_UART_ENABLE_AUTO_START_DMA;
- config->bUartMode = (__u8)(tport->tp_uart_mode);
+ wflags |= TI_UART_ENABLE_MS_INTS;
+ wflags |= TI_UART_ENABLE_AUTO_START_DMA;
+ config->bUartMode = tport->tp_uart_mode;
- switch (cflag & CSIZE) {
+ switch (C_CSIZE(tty)) {
case CS5:
config->bDataBits = TI_UART_5_DATA_BITS;
break;
@@ -1000,29 +963,29 @@ static void ti_set_termios(struct tty_struct *tty,
/* CMSPAR isn't supported by this driver */
tty->termios.c_cflag &= ~CMSPAR;
- if (cflag & PARENB) {
- if (cflag & PARODD) {
- config->wFlags |= TI_UART_ENABLE_PARITY_CHECKING;
+ if (C_PARENB(tty)) {
+ if (C_PARODD(tty)) {
+ wflags |= TI_UART_ENABLE_PARITY_CHECKING;
config->bParity = TI_UART_ODD_PARITY;
} else {
- config->wFlags |= TI_UART_ENABLE_PARITY_CHECKING;
+ wflags |= TI_UART_ENABLE_PARITY_CHECKING;
config->bParity = TI_UART_EVEN_PARITY;
}
} else {
- config->wFlags &= ~TI_UART_ENABLE_PARITY_CHECKING;
+ wflags &= ~TI_UART_ENABLE_PARITY_CHECKING;
config->bParity = TI_UART_NO_PARITY;
}
- if (cflag & CSTOPB)
+ if (C_CSTOPB(tty))
config->bStopBits = TI_UART_2_STOP_BITS;
else
config->bStopBits = TI_UART_1_STOP_BITS;
- if (cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
/* RTS flow control must be off to drop RTS for baud rate B0 */
- if ((cflag & CBAUD) != B0)
- config->wFlags |= TI_UART_ENABLE_RTS_IN;
- config->wFlags |= TI_UART_ENABLE_CTS_OUT;
+ if ((C_BAUD(tty)) != B0)
+ wflags |= TI_UART_ENABLE_RTS_IN;
+ wflags |= TI_UART_ENABLE_CTS_OUT;
} else {
ti_restart_read(tport, tty);
}
@@ -1032,34 +995,34 @@ static void ti_set_termios(struct tty_struct *tty,
config->cXoff = STOP_CHAR(tty);
if (I_IXOFF(tty))
- config->wFlags |= TI_UART_ENABLE_X_IN;
+ wflags |= TI_UART_ENABLE_X_IN;
else
ti_restart_read(tport, tty);
if (I_IXON(tty))
- config->wFlags |= TI_UART_ENABLE_X_OUT;
+ wflags |= TI_UART_ENABLE_X_OUT;
}
baud = tty_get_baud_rate(tty);
if (!baud)
baud = 9600;
if (tport->tp_tdev->td_is_3410)
- config->wBaudRate = (__u16)((923077 + baud/2) / baud);
+ wbaudrate = (923077 + baud/2) / baud;
else
- config->wBaudRate = (__u16)((461538 + baud/2) / baud);
+ wbaudrate = (461538 + baud/2) / baud;
/* FIXME: Should calculate resulting baud here and report it back */
- if ((cflag & CBAUD) != B0)
+ if ((C_BAUD(tty)) != B0)
tty_encode_baud_rate(tty, baud, baud);
dev_dbg(&port->dev,
"%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d\n",
- __func__, baud, config->wBaudRate, config->wFlags,
+ __func__, baud, wbaudrate, wflags,
config->bDataBits, config->bParity, config->bStopBits,
config->cXon, config->cXoff, config->bUartMode);
- cpu_to_be16s(&config->wBaudRate);
- cpu_to_be16s(&config->wFlags);
+ config->wBaudRate = cpu_to_be16(wbaudrate);
+ config->wFlags = cpu_to_be16(wflags);
status = ti_command_out_sync(tport->tp_tdev, TI_SET_CONFIG,
(__u8)(TI_UART1_PORT + port_number), 0, (__u8 *)config,
@@ -1071,7 +1034,7 @@ static void ti_set_termios(struct tty_struct *tty,
/* SET_CONFIG asserts RTS and DTR, reset them correctly */
mcr = tport->tp_shadow_mcr;
/* if baud rate is B0, clear RTS and DTR */
- if ((cflag & CBAUD) == B0)
+ if (C_BAUD(tty) == B0)
mcr &= ~(TI_MCR_DTR | TI_MCR_RTS);
status = ti_set_mcr(tport, mcr);
if (status)
@@ -1092,9 +1055,6 @@ static int ti_tiocmget(struct tty_struct *tty)
unsigned int mcr;
unsigned long flags;
- if (tport == NULL)
- return -ENODEV;
-
spin_lock_irqsave(&tport->tp_lock, flags);
msr = tport->tp_msr;
mcr = tport->tp_shadow_mcr;
@@ -1122,9 +1082,6 @@ static int ti_tiocmset(struct tty_struct *tty,
unsigned int mcr;
unsigned long flags;
- if (tport == NULL)
- return -ENODEV;
-
spin_lock_irqsave(&tport->tp_lock, flags);
mcr = tport->tp_shadow_mcr;
@@ -1155,9 +1112,6 @@ static void ti_break(struct tty_struct *tty, int break_state)
dev_dbg(&port->dev, "%s - state = %d\n", __func__, break_state);
- if (tport == NULL)
- return;
-
status = ti_write_byte(port, tport->tp_tdev,
tport->tp_uart_base_addr + TI_UART_OFFSET_LCR,
TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0);
@@ -1189,7 +1143,7 @@ static void ti_interrupt_callback(struct urb *urb)
int function;
int status = urb->status;
int retval;
- __u8 msr;
+ u8 msr;
switch (status) {
case 0:
@@ -1198,11 +1152,9 @@ static void ti_interrupt_callback(struct urb *urb)
case -ENOENT:
case -ESHUTDOWN:
dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status);
- tdev->td_urb_error = 1;
return;
default:
dev_err(dev, "%s - nonzero urb status, %d\n", __func__, status);
- tdev->td_urb_error = 1;
goto exit;
}
@@ -1275,12 +1227,10 @@ static void ti_bulk_in_callback(struct urb *urb)
case -ENOENT:
case -ESHUTDOWN:
dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status);
- tport->tp_tdev->td_urb_error = 1;
return;
default:
dev_err(dev, "%s - nonzero urb status, %d\n",
__func__, status);
- tport->tp_tdev->td_urb_error = 1;
}
if (status == -EPIPE)
@@ -1335,12 +1285,10 @@ static void ti_bulk_out_callback(struct urb *urb)
case -ENOENT:
case -ESHUTDOWN:
dev_dbg(&port->dev, "%s - urb shutting down, %d\n", __func__, status);
- tport->tp_tdev->td_urb_error = 1;
return;
default:
dev_err_console(port, "%s - nonzero urb status, %d\n",
__func__, status);
- tport->tp_tdev->td_urb_error = 1;
}
/* send any buffered data */
@@ -1490,7 +1438,6 @@ static int ti_get_serial_info(struct ti_port *tport,
ret_serial.type = PORT_16550A;
ret_serial.line = port->minor;
ret_serial.port = port->port_number;
- ret_serial.flags = tport->tp_flags;
ret_serial.xmit_fifo_size = kfifo_size(&port->write_fifo);
ret_serial.baud_base = tport->tp_tdev->td_is_3410 ? 921600 : 460800;
ret_serial.closing_wait = cwait;
@@ -1515,14 +1462,13 @@ static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport,
if (cwait != ASYNC_CLOSING_WAIT_NONE)
cwait = msecs_to_jiffies(10 * new_serial.closing_wait);
- tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS;
tport->tp_port->port.closing_wait = cwait;
return 0;
}
-static void ti_handle_new_msr(struct ti_port *tport, __u8 msr)
+static void ti_handle_new_msr(struct ti_port *tport, u8 msr)
{
struct async_icount *icount;
struct tty_struct *tty;
@@ -1634,8 +1580,8 @@ static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
static int ti_write_byte(struct usb_serial_port *port,
- struct ti_device *tdev, unsigned long addr,
- __u8 mask, __u8 byte)
+ struct ti_device *tdev, unsigned long addr,
+ u8 mask, u8 byte)
{
int status;
unsigned int size;
@@ -1679,11 +1625,10 @@ static int ti_do_download(struct usb_device *dev, int pipe,
int len;
for (pos = sizeof(struct ti_firmware_header); pos < size; pos++)
- cs = (__u8)(cs + buffer[pos]);
+ cs = (u8)(cs + buffer[pos]);
header = (struct ti_firmware_header *)buffer;
- header->wLength = cpu_to_le16((__u16)(size
- - sizeof(struct ti_firmware_header)));
+ header->wLength = cpu_to_le16(size - sizeof(*header));
header->bCheckSum = cs;
dev_dbg(&dev->dev, "%s - downloading firmware\n", __func__);
@@ -1701,7 +1646,7 @@ static int ti_download_firmware(struct ti_device *tdev)
{
int status;
int buffer_size;
- __u8 *buffer;
+ u8 *buffer;
struct usb_device *dev = tdev->td_serial->dev;
unsigned int pipe = usb_sndbulkpipe(dev,
tdev->td_serial->port[0]->bulk_out_endpointAddress);
diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c
index 1d8b03c81030..878b4b8761f5 100644
--- a/drivers/usb/storage/alauda.c
+++ b/drivers/usb/storage/alauda.c
@@ -939,10 +939,8 @@ static int alauda_read_data(struct us_data *us, unsigned long address,
len = min(sectors, blocksize) * (pagesize + 64);
buffer = kmalloc(len, GFP_NOIO);
- if (buffer == NULL) {
- printk(KERN_WARNING "alauda_read_data: Out of memory\n");
+ if (!buffer)
return USB_STOR_TRANSPORT_ERROR;
- }
/* Figure out the initial LBA and page */
lba = address >> blockshift;
@@ -1033,18 +1031,15 @@ static int alauda_write_data(struct us_data *us, unsigned long address,
len = min(sectors, blocksize) * pagesize;
buffer = kmalloc(len, GFP_NOIO);
- if (buffer == NULL) {
- printk(KERN_WARNING "alauda_write_data: Out of memory\n");
+ if (!buffer)
return USB_STOR_TRANSPORT_ERROR;
- }
/*
* We also need a temporary block buffer, where we read in the old data,
* overwrite parts with the new data, and manipulate the redundancy data
*/
blockbuffer = kmalloc((pagesize + 64) * blocksize, GFP_NOIO);
- if (blockbuffer == NULL) {
- printk(KERN_WARNING "alauda_write_data: Out of memory\n");
+ if (!blockbuffer) {
kfree(buffer);
return USB_STOR_TRANSPORT_ERROR;
}
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 33eb923df892..8cd2926fb1fe 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -296,6 +296,14 @@ static int slave_configure(struct scsi_device *sdev)
if (us->fflags & US_FL_BROKEN_FUA)
sdev->broken_fua = 1;
+ /* Some even totally fail to indicate a cache */
+ if (us->fflags & US_FL_ALWAYS_SYNC) {
+ /* don't read caching information */
+ sdev->skip_ms_page_8 = 1;
+ sdev->skip_ms_page_3f = 1;
+ /* assume sync is needed */
+ sdev->wce_default_on = 1;
+ }
} else {
/*
diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c
index c5797fa2125e..3aeaa536c44f 100644
--- a/drivers/usb/storage/sddr09.c
+++ b/drivers/usb/storage/sddr09.c
@@ -766,10 +766,8 @@ sddr09_read_data(struct us_data *us,
len = min(sectors, (unsigned int) info->blocksize) * info->pagesize;
buffer = kmalloc(len, GFP_NOIO);
- if (buffer == NULL) {
- printk(KERN_WARNING "sddr09_read_data: Out of memory\n");
+ if (!buffer)
return -ENOMEM;
- }
// This could be made much more efficient by checking for
// contiguous LBA's. Another exercise left to the student.
@@ -1004,10 +1002,8 @@ sddr09_write_data(struct us_data *us,
pagelen = (1 << info->pageshift) + (1 << CONTROL_SHIFT);
blocklen = (pagelen << info->blockshift);
blockbuffer = kmalloc(blocklen, GFP_NOIO);
- if (!blockbuffer) {
- printk(KERN_WARNING "sddr09_write_data: Out of memory\n");
+ if (!blockbuffer)
return -ENOMEM;
- }
/*
* Since we don't write the user data directly to the device,
@@ -1017,8 +1013,7 @@ sddr09_write_data(struct us_data *us,
len = min(sectors, (unsigned int) info->blocksize) * info->pagesize;
buffer = kmalloc(len, GFP_NOIO);
- if (buffer == NULL) {
- printk(KERN_WARNING "sddr09_write_data: Out of memory\n");
+ if (!buffer) {
kfree(blockbuffer);
return -ENOMEM;
}
@@ -1241,8 +1236,7 @@ sddr09_read_map(struct us_data *us) {
alloc_blocks = min(numblocks, SDDR09_READ_MAP_BUFSZ >> CONTROL_SHIFT);
alloc_len = (alloc_blocks << CONTROL_SHIFT);
buffer = kmalloc(alloc_len, GFP_NOIO);
- if (buffer == NULL) {
- printk(KERN_WARNING "sddr09_read_map: out of memory\n");
+ if (!buffer) {
result = -1;
goto done;
}
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index aa3539238848..af3c7eecff91 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -338,6 +338,13 @@ UNUSUAL_DEV( 0x046b, 0xff40, 0x0100, 0x0100,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_WP_DETECT),
+/* Reported by Egbert Eich <eich@suse.com> */
+UNUSUAL_DEV( 0x0480, 0xd010, 0x0100, 0x9999,
+ "Toshiba",
+ "External USB 3.0",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_ALWAYS_SYNC),
+
/* Patch submitted by Philipp Friedrich <philipp@void.at> */
UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100,
"Kyocera",
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index ef2d8cde6ef7..2cba13a532cd 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -498,7 +498,8 @@ void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags)
US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 |
US_FL_INITIAL_READ10 | US_FL_WRITE_CACHE |
US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES |
- US_FL_MAX_SECTORS_240 | US_FL_NO_REPORT_LUNS);
+ US_FL_MAX_SECTORS_240 | US_FL_NO_REPORT_LUNS |
+ US_FL_ALWAYS_SYNC);
p = quirks;
while (*p) {
@@ -581,6 +582,9 @@ void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags)
case 'w':
f |= US_FL_NO_WP_DETECT;
break;
+ case 'y':
+ f |= US_FL_ALWAYS_SYNC;
+ break;
/* Ignore unrecognized flag characters */
}
}
@@ -794,10 +798,8 @@ static int usb_stor_acquire_resources(struct us_data *us)
struct task_struct *th;
us->current_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!us->current_urb) {
- usb_stor_dbg(us, "URB allocation failed\n");
+ if (!us->current_urb)
return -ENOMEM;
- }
/*
* Just before we start our control thread, initialize
@@ -1070,17 +1072,17 @@ int usb_stor_probe2(struct us_data *us)
result = usb_stor_acquire_resources(us);
if (result)
goto BadDevice;
+ usb_autopm_get_interface_no_resume(us->pusb_intf);
snprintf(us->scsi_name, sizeof(us->scsi_name), "usb-storage %s",
dev_name(&us->pusb_intf->dev));
result = scsi_add_host(us_to_host(us), dev);
if (result) {
dev_warn(dev,
"Unable to add the scsi host\n");
- goto BadDevice;
+ goto HostAddErr;
}
/* Submit the delayed_work for SCSI-device scanning */
- usb_autopm_get_interface_no_resume(us->pusb_intf);
set_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
if (delay_use > 0)
@@ -1090,6 +1092,8 @@ int usb_stor_probe2(struct us_data *us)
return 0;
/* We come here if there are any problems */
+HostAddErr:
+ usb_autopm_put_interface_no_suspend(us->pusb_intf);
BadDevice:
usb_stor_dbg(us, "storage_probe() failed\n");
release_everything(us);
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index 545d09b8081d..5133a0792eb0 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -499,10 +499,8 @@ static int skel_probe(struct usb_interface *interface,
/* allocate memory for our device state and initialize it */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
- if (!dev) {
- dev_err(&interface->dev, "Out of memory\n");
+ if (!dev)
goto error;
- }
kref_init(&dev->kref);
sema_init(&dev->limit_sem, WRITES_IN_FLIGHT);
mutex_init(&dev->io_mutex);
@@ -526,17 +524,11 @@ static int skel_probe(struct usb_interface *interface,
dev->bulk_in_size = buffer_size;
dev->bulk_in_endpointAddr = endpoint->bEndpointAddress;
dev->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
- if (!dev->bulk_in_buffer) {
- dev_err(&interface->dev,
- "Could not allocate bulk_in_buffer\n");
+ if (!dev->bulk_in_buffer)
goto error;
- }
dev->bulk_in_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!dev->bulk_in_urb) {
- dev_err(&interface->dev,
- "Could not allocate bulk_in_urb\n");
+ if (!dev->bulk_in_urb)
goto error;
- }
}
if (!dev->bulk_out_endpointAddr &&
diff --git a/drivers/usb/usbip/Kconfig b/drivers/usb/usbip/Kconfig
index 17646b25343f..eeefa29f8aa2 100644
--- a/drivers/usb/usbip/Kconfig
+++ b/drivers/usb/usbip/Kconfig
@@ -1,6 +1,7 @@
config USBIP_CORE
tristate "USB/IP support"
- depends on USB_COMMON && NET
+ depends on NET
+ select USB_COMMON
---help---
This enables pushing USB packets over IP to allow remote
machines direct access to USB devices. It provides the
@@ -24,6 +25,27 @@ config USBIP_VHCI_HCD
To compile this driver as a module, choose M here: the
module will be called vhci-hcd.
+config USBIP_VHCI_HC_PORTS
+ int "Number of ports per USB/IP virtual host controller"
+ range 1 31
+ default 8
+ depends on USBIP_VHCI_HCD
+ ---help---
+ To increase number of ports available for USB/IP virtual
+ host controller driver, this defines number of ports per
+ USB/IP virtual host controller.
+
+config USBIP_VHCI_NR_HCS
+ int "Number of USB/IP virtual host controllers"
+ range 1 128
+ default 1
+ depends on USBIP_VHCI_HCD
+ ---help---
+ To increase number of ports available for USB/IP virtual
+ host controller driver, this defines number of USB/IP
+ virtual host controllers as if adding physical host
+ controllers.
+
config USBIP_HOST
tristate "Host driver"
depends on USBIP_CORE && USB
diff --git a/drivers/usb/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c
index 2df63e305722..191b176ffedf 100644
--- a/drivers/usb/usbip/stub_rx.c
+++ b/drivers/usb/usbip/stub_rx.c
@@ -461,7 +461,6 @@ static void stub_recv_cmd_submit(struct stub_device *sdev,
priv->urb = usb_alloc_urb(0, GFP_KERNEL);
if (!priv->urb) {
- dev_err(&udev->dev, "malloc urb\n");
usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
return;
}
diff --git a/drivers/usb/usbip/vhci.h b/drivers/usb/usbip/vhci.h
index a863a98a91ce..88b71c4e068f 100644
--- a/drivers/usb/usbip/vhci.h
+++ b/drivers/usb/usbip/vhci.h
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2003-2008 Takahiro Hirofuchi
+ * Copyright (C) 2015 Nobuo Iwata
*
* This is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -72,13 +73,25 @@ struct vhci_unlink {
};
/* Number of supported ports. Value has an upperbound of USB_MAXCHILDREN */
-#define VHCI_NPORTS 8
+#ifdef CONFIG_USBIP_VHCI_HC_PORTS
+#define VHCI_HC_PORTS CONFIG_USBIP_VHCI_HC_PORTS
+#else
+#define VHCI_HC_PORTS 8
+#endif
+
+#ifdef CONFIG_USBIP_VHCI_NR_HCS
+#define VHCI_NR_HCS CONFIG_USBIP_VHCI_NR_HCS
+#else
+#define VHCI_NR_HCS 1
+#endif
+
+#define MAX_STATUS_NAME 16
/* for usb_bus.hcpriv */
struct vhci_hcd {
spinlock_t lock;
- u32 port_status[VHCI_NPORTS];
+ u32 port_status[VHCI_HC_PORTS];
unsigned resuming:1;
unsigned long re_timeout;
@@ -90,14 +103,19 @@ struct vhci_hcd {
* wIndex shows the port number and begins from 1.
* But, the index of this array begins from 0.
*/
- struct vhci_device vdev[VHCI_NPORTS];
+ struct vhci_device vdev[VHCI_HC_PORTS];
};
-extern struct vhci_hcd *the_controller;
-extern const struct attribute_group dev_attr_group;
+extern int vhci_num_controllers;
+extern struct platform_device **vhci_pdevs;
+extern struct attribute_group vhci_attr_group;
/* vhci_hcd.c */
-void rh_port_connect(int rhport, enum usb_device_speed speed);
+void rh_port_connect(struct vhci_device *vdev, enum usb_device_speed speed);
+
+/* vhci_sysfs.c */
+int vhci_init_attr_group(void);
+void vhci_finish_attr_group(void);
/* vhci_rx.c */
struct urb *pickup_urb_and_free_priv(struct vhci_device *vdev, __u32 seqnum);
@@ -106,9 +124,14 @@ int vhci_rx_loop(void *data);
/* vhci_tx.c */
int vhci_tx_loop(void *data);
-static inline struct vhci_device *port_to_vdev(__u32 port)
+static inline __u32 port_to_rhport(__u32 port)
+{
+ return port % VHCI_HC_PORTS;
+}
+
+static inline int port_to_pdev_nr(__u32 port)
{
- return &the_controller->vdev[port];
+ return port / VHCI_HC_PORTS;
}
static inline struct vhci_hcd *hcd_to_vhci(struct usb_hcd *hcd)
@@ -116,14 +139,25 @@ static inline struct vhci_hcd *hcd_to_vhci(struct usb_hcd *hcd)
return (struct vhci_hcd *) (hcd->hcd_priv);
}
+static inline struct device *hcd_dev(struct usb_hcd *hcd)
+{
+ return (hcd)->self.controller;
+}
+
+static inline const char *hcd_name(struct usb_hcd *hcd)
+{
+ return (hcd)->self.bus_name;
+}
+
static inline struct usb_hcd *vhci_to_hcd(struct vhci_hcd *vhci)
{
return container_of((void *) vhci, struct usb_hcd, hcd_priv);
}
-static inline struct device *vhci_dev(struct vhci_hcd *vhci)
+static inline struct vhci_hcd *vdev_to_vhci(struct vhci_device *vdev)
{
- return vhci_to_hcd(vhci)->self.controller;
+ return container_of(
+ (void *)(vdev - vdev->rhport), struct vhci_hcd, vdev);
}
#endif /* __USBIP_VHCI_H */
diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index 2e0450bec1b1..03eccf29ace0 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2003-2008 Takahiro Hirofuchi
+ * Copyright (C) 2015-2016 Nobuo Iwata
*
* This is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -56,7 +57,9 @@ static int vhci_get_frame_number(struct usb_hcd *hcd);
static const char driver_name[] = "vhci_hcd";
static const char driver_desc[] = "USB/IP Virtual Host Controller";
-struct vhci_hcd *the_controller;
+int vhci_num_controllers = VHCI_NR_HCS;
+
+struct platform_device **vhci_pdevs;
static const char * const bit_desc[] = {
"CONNECTION", /*0*/
@@ -119,47 +122,59 @@ static void dump_port_status_diff(u32 prev_status, u32 new_status)
pr_debug("\n");
}
-void rh_port_connect(int rhport, enum usb_device_speed speed)
+void rh_port_connect(struct vhci_device *vdev, enum usb_device_speed speed)
{
+ struct vhci_hcd *vhci = vdev_to_vhci(vdev);
+ int rhport = vdev->rhport;
+ u32 status;
unsigned long flags;
usbip_dbg_vhci_rh("rh_port_connect %d\n", rhport);
- spin_lock_irqsave(&the_controller->lock, flags);
+ spin_lock_irqsave(&vhci->lock, flags);
+
+ status = vhci->port_status[rhport];
- the_controller->port_status[rhport] |= USB_PORT_STAT_CONNECTION
- | (1 << USB_PORT_FEAT_C_CONNECTION);
+ status |= USB_PORT_STAT_CONNECTION | (1 << USB_PORT_FEAT_C_CONNECTION);
switch (speed) {
case USB_SPEED_HIGH:
- the_controller->port_status[rhport] |= USB_PORT_STAT_HIGH_SPEED;
+ status |= USB_PORT_STAT_HIGH_SPEED;
break;
case USB_SPEED_LOW:
- the_controller->port_status[rhport] |= USB_PORT_STAT_LOW_SPEED;
+ status |= USB_PORT_STAT_LOW_SPEED;
break;
default:
break;
}
- spin_unlock_irqrestore(&the_controller->lock, flags);
+ vhci->port_status[rhport] = status;
+
+ spin_unlock_irqrestore(&vhci->lock, flags);
- usb_hcd_poll_rh_status(vhci_to_hcd(the_controller));
+ usb_hcd_poll_rh_status(vhci_to_hcd(vhci));
}
-static void rh_port_disconnect(int rhport)
+static void rh_port_disconnect(struct vhci_device *vdev)
{
+ struct vhci_hcd *vhci = vdev_to_vhci(vdev);
+ int rhport = vdev->rhport;
+ u32 status;
unsigned long flags;
usbip_dbg_vhci_rh("rh_port_disconnect %d\n", rhport);
- spin_lock_irqsave(&the_controller->lock, flags);
+ spin_lock_irqsave(&vhci->lock, flags);
+
+ status = vhci->port_status[rhport];
+
+ status &= ~USB_PORT_STAT_CONNECTION;
+ status |= (1 << USB_PORT_FEAT_C_CONNECTION);
- the_controller->port_status[rhport] &= ~USB_PORT_STAT_CONNECTION;
- the_controller->port_status[rhport] |=
- (1 << USB_PORT_FEAT_C_CONNECTION);
+ vhci->port_status[rhport] = status;
- spin_unlock_irqrestore(&the_controller->lock, flags);
- usb_hcd_poll_rh_status(vhci_to_hcd(the_controller));
+ spin_unlock_irqrestore(&vhci->lock, flags);
+ usb_hcd_poll_rh_status(vhci_to_hcd(vhci));
}
#define PORT_C_MASK \
@@ -188,7 +203,7 @@ static int vhci_hub_status(struct usb_hcd *hcd, char *buf)
int changed = 0;
unsigned long flags;
- retval = DIV_ROUND_UP(VHCI_NPORTS + 1, 8);
+ retval = DIV_ROUND_UP(VHCI_HC_PORTS + 1, 8);
memset(buf, 0, retval);
vhci = hcd_to_vhci(hcd);
@@ -200,7 +215,7 @@ static int vhci_hub_status(struct usb_hcd *hcd, char *buf)
}
/* check pseudo status register for each port */
- for (rhport = 0; rhport < VHCI_NPORTS; rhport++) {
+ for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
if ((vhci->port_status[rhport] & PORT_C_MASK)) {
/* The status of a port has been changed, */
usbip_dbg_vhci_rh("port %d status changed\n", rhport);
@@ -225,7 +240,7 @@ static inline void hub_descriptor(struct usb_hub_descriptor *desc)
desc->bDescLength = 9;
desc->wHubCharacteristics = cpu_to_le16(
HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM);
- desc->bNbrPorts = VHCI_NPORTS;
+ desc->bNbrPorts = VHCI_HC_PORTS;
desc->u.hs.DeviceRemovable[0] = 0xff;
desc->u.hs.DeviceRemovable[1] = 0xff;
}
@@ -238,7 +253,7 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
int rhport;
unsigned long flags;
- u32 prev_port_status[VHCI_NPORTS];
+ u32 prev_port_status[VHCI_HC_PORTS];
if (!HCD_HW_ACCESSIBLE(hcd))
return -ETIMEDOUT;
@@ -249,7 +264,7 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
*/
usbip_dbg_vhci_rh("typeReq %x wValue %x wIndex %x\n", typeReq, wValue,
wIndex);
- if (wIndex > VHCI_NPORTS)
+ if (wIndex > VHCI_HC_PORTS)
pr_err("invalid port number %d\n", wIndex);
rhport = ((__u8)(wIndex & 0x00ff)) - 1;
@@ -315,7 +330,7 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
break;
case GetPortStatus:
usbip_dbg_vhci_rh(" GetPortStatus port %x\n", wIndex);
- if (wIndex > VHCI_NPORTS || wIndex < 1) {
+ if (wIndex > VHCI_HC_PORTS || wIndex < 1) {
pr_err("invalid port number %d\n", wIndex);
retval = -EPIPE;
}
@@ -416,14 +431,27 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
static struct vhci_device *get_vdev(struct usb_device *udev)
{
- int i;
+ struct platform_device *pdev;
+ struct usb_hcd *hcd;
+ struct vhci_hcd *vhci;
+ int pdev_nr, rhport;
if (!udev)
return NULL;
- for (i = 0; i < VHCI_NPORTS; i++)
- if (the_controller->vdev[i].udev == udev)
- return port_to_vdev(i);
+ for (pdev_nr = 0; pdev_nr < vhci_num_controllers; pdev_nr++) {
+ pdev = *(vhci_pdevs + pdev_nr);
+ if (pdev == NULL)
+ continue;
+ hcd = platform_get_drvdata(pdev);
+ if (hcd == NULL)
+ continue;
+ vhci = hcd_to_vhci(hcd);
+ for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
+ if (vhci->vdev[rhport].udev == udev)
+ return &vhci->vdev[rhport];
+ }
+ }
return NULL;
}
@@ -432,6 +460,7 @@ static void vhci_tx_urb(struct urb *urb)
{
struct vhci_device *vdev = get_vdev(urb->dev);
struct vhci_priv *priv;
+ struct vhci_hcd *vhci = vdev_to_vhci(vdev);
unsigned long flags;
if (!vdev) {
@@ -447,7 +476,7 @@ static void vhci_tx_urb(struct urb *urb)
spin_lock_irqsave(&vdev->priv_lock, flags);
- priv->seqnum = atomic_inc_return(&the_controller->seqnum);
+ priv->seqnum = atomic_inc_return(&vhci->seqnum);
if (priv->seqnum == 0xffff)
dev_info(&urb->dev->dev, "seqnum max\n");
@@ -465,7 +494,9 @@ static void vhci_tx_urb(struct urb *urb)
static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
gfp_t mem_flags)
{
+ struct vhci_hcd *vhci = hcd_to_vhci(hcd);
struct device *dev = &urb->dev->dev;
+ u8 portnum = urb->dev->portnum;
int ret = 0;
struct vhci_device *vdev;
unsigned long flags;
@@ -473,26 +504,30 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
usbip_dbg_vhci_hc("enter, usb_hcd %p urb %p mem_flags %d\n",
hcd, urb, mem_flags);
+ if (portnum > VHCI_HC_PORTS) {
+ pr_err("invalid port number %d\n", portnum);
+ return -ENODEV;
+ }
+ vdev = &vhci->vdev[portnum-1];
+
/* patch to usb_sg_init() is in 2.5.60 */
BUG_ON(!urb->transfer_buffer && urb->transfer_buffer_length);
- spin_lock_irqsave(&the_controller->lock, flags);
+ spin_lock_irqsave(&vhci->lock, flags);
if (urb->status != -EINPROGRESS) {
dev_err(dev, "URB already unlinked!, status %d\n", urb->status);
- spin_unlock_irqrestore(&the_controller->lock, flags);
+ spin_unlock_irqrestore(&vhci->lock, flags);
return urb->status;
}
- vdev = port_to_vdev(urb->dev->portnum-1);
-
/* refuse enqueue for dead connection */
spin_lock(&vdev->ud.lock);
if (vdev->ud.status == VDEV_ST_NULL ||
vdev->ud.status == VDEV_ST_ERROR) {
dev_err(dev, "enqueue for inactive port %d\n", vdev->rhport);
spin_unlock(&vdev->ud.lock);
- spin_unlock_irqrestore(&the_controller->lock, flags);
+ spin_unlock_irqrestore(&vhci->lock, flags);
return -ENODEV;
}
spin_unlock(&vdev->ud.lock);
@@ -565,17 +600,16 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
out:
vhci_tx_urb(urb);
- spin_unlock_irqrestore(&the_controller->lock, flags);
+ spin_unlock_irqrestore(&vhci->lock, flags);
return 0;
no_need_xmit:
usb_hcd_unlink_urb_from_ep(hcd, urb);
no_need_unlink:
- spin_unlock_irqrestore(&the_controller->lock, flags);
+ spin_unlock_irqrestore(&vhci->lock, flags);
if (!ret)
- usb_hcd_giveback_urb(vhci_to_hcd(the_controller),
- urb, urb->status);
+ usb_hcd_giveback_urb(hcd, urb, urb->status);
return ret;
}
@@ -627,19 +661,20 @@ no_need_unlink:
*/
static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
{
+ struct vhci_hcd *vhci = hcd_to_vhci(hcd);
struct vhci_priv *priv;
struct vhci_device *vdev;
unsigned long flags;
pr_info("dequeue a urb %p\n", urb);
- spin_lock_irqsave(&the_controller->lock, flags);
+ spin_lock_irqsave(&vhci->lock, flags);
priv = urb->hcpriv;
if (!priv) {
/* URB was never linked! or will be soon given back by
* vhci_rx. */
- spin_unlock_irqrestore(&the_controller->lock, flags);
+ spin_unlock_irqrestore(&vhci->lock, flags);
return -EIDRM;
}
@@ -648,7 +683,7 @@ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
ret = usb_hcd_check_unlink_urb(hcd, urb, status);
if (ret) {
- spin_unlock_irqrestore(&the_controller->lock, flags);
+ spin_unlock_irqrestore(&vhci->lock, flags);
return ret;
}
}
@@ -676,10 +711,9 @@ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
usb_hcd_unlink_urb_from_ep(hcd, urb);
- spin_unlock_irqrestore(&the_controller->lock, flags);
- usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb,
- urb->status);
- spin_lock_irqsave(&the_controller->lock, flags);
+ spin_unlock_irqrestore(&vhci->lock, flags);
+ usb_hcd_giveback_urb(vhci_to_hcd(vhci), urb, urb->status);
+ spin_lock_irqsave(&vhci->lock, flags);
} else {
/* tcp connection is alive */
@@ -691,12 +725,12 @@ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
unlink = kzalloc(sizeof(struct vhci_unlink), GFP_ATOMIC);
if (!unlink) {
spin_unlock(&vdev->priv_lock);
- spin_unlock_irqrestore(&the_controller->lock, flags);
+ spin_unlock_irqrestore(&vhci->lock, flags);
usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC);
return -ENOMEM;
}
- unlink->seqnum = atomic_inc_return(&the_controller->seqnum);
+ unlink->seqnum = atomic_inc_return(&vhci->seqnum);
if (unlink->seqnum == 0xffff)
pr_info("seqnum max\n");
@@ -712,7 +746,7 @@ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
spin_unlock(&vdev->priv_lock);
}
- spin_unlock_irqrestore(&the_controller->lock, flags);
+ spin_unlock_irqrestore(&vhci->lock, flags);
usbip_dbg_vhci_hc("leave\n");
return 0;
@@ -720,10 +754,12 @@ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
static void vhci_device_unlink_cleanup(struct vhci_device *vdev)
{
+ struct vhci_hcd *vhci = vdev_to_vhci(vdev);
+ struct usb_hcd *hcd = vhci_to_hcd(vhci);
struct vhci_unlink *unlink, *tmp;
unsigned long flags;
- spin_lock_irqsave(&the_controller->lock, flags);
+ spin_lock_irqsave(&vhci->lock, flags);
spin_lock(&vdev->priv_lock);
list_for_each_entry_safe(unlink, tmp, &vdev->unlink_tx, list) {
@@ -752,24 +788,23 @@ static void vhci_device_unlink_cleanup(struct vhci_device *vdev)
urb->status = -ENODEV;
- usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb);
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
list_del(&unlink->list);
spin_unlock(&vdev->priv_lock);
- spin_unlock_irqrestore(&the_controller->lock, flags);
+ spin_unlock_irqrestore(&vhci->lock, flags);
- usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb,
- urb->status);
+ usb_hcd_giveback_urb(hcd, urb, urb->status);
- spin_lock_irqsave(&the_controller->lock, flags);
+ spin_lock_irqsave(&vhci->lock, flags);
spin_lock(&vdev->priv_lock);
kfree(unlink);
}
spin_unlock(&vdev->priv_lock);
- spin_unlock_irqrestore(&the_controller->lock, flags);
+ spin_unlock_irqrestore(&vhci->lock, flags);
}
/*
@@ -827,7 +862,7 @@ static void vhci_shutdown_connection(struct usbip_device *ud)
* is actually given back by vhci_rx after receiving its return pdu.
*
*/
- rh_port_disconnect(vdev->rhport);
+ rh_port_disconnect(vdev);
pr_info("disconnect device\n");
}
@@ -866,7 +901,7 @@ static void vhci_device_unusable(struct usbip_device *ud)
static void vhci_device_init(struct vhci_device *vdev)
{
- memset(vdev, 0, sizeof(*vdev));
+ memset(vdev, 0, sizeof(struct vhci_device));
vdev->ud.side = USBIP_VHCI;
vdev->ud.status = VDEV_ST_NULL;
@@ -887,17 +922,34 @@ static void vhci_device_init(struct vhci_device *vdev)
usbip_start_eh(&vdev->ud);
}
+static int hcd_name_to_id(const char *name)
+{
+ char *c;
+ long val;
+ int ret;
+
+ c = strchr(name, '.');
+ if (c == NULL)
+ return 0;
+
+ ret = kstrtol(c+1, 10, &val);
+ if (ret < 0)
+ return ret;
+
+ return val;
+}
+
static int vhci_start(struct usb_hcd *hcd)
{
struct vhci_hcd *vhci = hcd_to_vhci(hcd);
- int rhport;
+ int id, rhport;
int err = 0;
usbip_dbg_vhci_hc("enter vhci_start\n");
/* initialize private data of usb_hcd */
- for (rhport = 0; rhport < VHCI_NPORTS; rhport++) {
+ for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
struct vhci_device *vdev = &vhci->vdev[rhport];
vhci_device_init(vdev);
@@ -910,11 +962,26 @@ static int vhci_start(struct usb_hcd *hcd)
hcd->power_budget = 0; /* no limit */
hcd->uses_new_polling = 1;
+ id = hcd_name_to_id(hcd_name(hcd));
+ if (id < 0) {
+ pr_err("invalid vhci name %s\n", hcd_name(hcd));
+ return -EINVAL;
+ }
+
/* vhci_hcd is now ready to be controlled through sysfs */
- err = sysfs_create_group(&vhci_dev(vhci)->kobj, &dev_attr_group);
- if (err) {
- pr_err("create sysfs files\n");
- return err;
+ if (id == 0) {
+ err = vhci_init_attr_group();
+ if (err) {
+ pr_err("init attr group\n");
+ return err;
+ }
+ err = sysfs_create_group(&hcd_dev(hcd)->kobj, &vhci_attr_group);
+ if (err) {
+ pr_err("create sysfs files\n");
+ vhci_finish_attr_group();
+ return err;
+ }
+ pr_info("created sysfs %s\n", hcd_name(hcd));
}
return 0;
@@ -923,15 +990,19 @@ static int vhci_start(struct usb_hcd *hcd)
static void vhci_stop(struct usb_hcd *hcd)
{
struct vhci_hcd *vhci = hcd_to_vhci(hcd);
- int rhport = 0;
+ int id, rhport;
usbip_dbg_vhci_hc("stop VHCI controller\n");
/* 1. remove the userland interface of vhci_hcd */
- sysfs_remove_group(&vhci_dev(vhci)->kobj, &dev_attr_group);
+ id = hcd_name_to_id(hcd_name(hcd));
+ if (id == 0) {
+ sysfs_remove_group(&hcd_dev(hcd)->kobj, &vhci_attr_group);
+ vhci_finish_attr_group();
+ }
/* 2. shutdown all the ports of vhci_hcd */
- for (rhport = 0; rhport < VHCI_NPORTS; rhport++) {
+ for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
struct vhci_device *vdev = &vhci->vdev[rhport];
usbip_event_add(&vdev->ud, VDEV_EVENT_REMOVED);
@@ -1025,9 +1096,6 @@ static int vhci_hcd_probe(struct platform_device *pdev)
}
hcd->has_tt = 1;
- /* this is private data for vhci_hcd */
- the_controller = hcd_to_vhci(hcd);
-
/*
* Finish generic HCD structure initialization and register.
* Call the driver's reset() and start() routines.
@@ -1036,7 +1104,6 @@ static int vhci_hcd_probe(struct platform_device *pdev)
if (ret != 0) {
pr_err("usb_add_hcd failed %d\n", ret);
usb_put_hcd(hcd);
- the_controller = NULL;
return ret;
}
@@ -1059,7 +1126,6 @@ static int vhci_hcd_remove(struct platform_device *pdev)
*/
usb_remove_hcd(hcd);
usb_put_hcd(hcd);
- the_controller = NULL;
return 0;
}
@@ -1070,21 +1136,24 @@ static int vhci_hcd_remove(struct platform_device *pdev)
static int vhci_hcd_suspend(struct platform_device *pdev, pm_message_t state)
{
struct usb_hcd *hcd;
- int rhport = 0;
+ struct vhci_hcd *vhci;
+ int rhport;
int connected = 0;
int ret = 0;
unsigned long flags;
hcd = platform_get_drvdata(pdev);
+ if (!hcd)
+ return 0;
+ vhci = hcd_to_vhci(hcd);
- spin_lock_irqsave(&the_controller->lock, flags);
+ spin_lock_irqsave(&vhci->lock, flags);
- for (rhport = 0; rhport < VHCI_NPORTS; rhport++)
- if (the_controller->port_status[rhport] &
- USB_PORT_STAT_CONNECTION)
+ for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++)
+ if (vhci->port_status[rhport] & USB_PORT_STAT_CONNECTION)
connected += 1;
- spin_unlock_irqrestore(&the_controller->lock, flags);
+ spin_unlock_irqrestore(&vhci->lock, flags);
if (connected > 0) {
dev_info(&pdev->dev,
@@ -1106,6 +1175,8 @@ static int vhci_hcd_resume(struct platform_device *pdev)
dev_dbg(&pdev->dev, "%s\n", __func__);
hcd = platform_get_drvdata(pdev);
+ if (!hcd)
+ return 0;
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
usb_hcd_poll_rh_status(hcd);
@@ -1129,52 +1200,78 @@ static struct platform_driver vhci_driver = {
},
};
-/*
- * The VHCI 'device' is 'virtual'; not a real plug&play hardware.
- * We need to add this virtual device as a platform device arbitrarily:
- * 1. platform_device_register()
- */
-static void the_pdev_release(struct device *dev)
+static int add_platform_device(int id)
{
+ struct platform_device *pdev;
+ int dev_nr;
+
+ if (id == 0)
+ dev_nr = -1;
+ else
+ dev_nr = id;
+
+ pdev = platform_device_register_simple(driver_name, dev_nr, NULL, 0);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ *(vhci_pdevs + id) = pdev;
+ return 0;
}
-static struct platform_device the_pdev = {
- /* should be the same name as driver_name */
- .name = driver_name,
- .id = -1,
- .dev = {
- .release = the_pdev_release,
- },
-};
+static void del_platform_devices(void)
+{
+ struct platform_device *pdev;
+ int i;
+
+ for (i = 0; i < vhci_num_controllers; i++) {
+ pdev = *(vhci_pdevs + i);
+ if (pdev != NULL)
+ platform_device_unregister(pdev);
+ *(vhci_pdevs + i) = NULL;
+ }
+ sysfs_remove_link(&platform_bus.kobj, driver_name);
+}
static int __init vhci_hcd_init(void)
{
- int ret;
+ int i, ret;
if (usb_disabled())
return -ENODEV;
+ if (vhci_num_controllers < 1)
+ vhci_num_controllers = 1;
+
+ vhci_pdevs = kcalloc(vhci_num_controllers, sizeof(void *), GFP_KERNEL);
+ if (vhci_pdevs == NULL)
+ return -ENOMEM;
+
ret = platform_driver_register(&vhci_driver);
if (ret)
goto err_driver_register;
- ret = platform_device_register(&the_pdev);
- if (ret)
- goto err_platform_device_register;
+ for (i = 0; i < vhci_num_controllers; i++) {
+ ret = add_platform_device(i);
+ if (ret)
+ goto err_platform_device_register;
+ }
pr_info(DRIVER_DESC " v" USBIP_VERSION "\n");
return ret;
err_platform_device_register:
+ del_platform_devices();
platform_driver_unregister(&vhci_driver);
err_driver_register:
+ kfree(vhci_pdevs);
return ret;
}
static void __exit vhci_hcd_exit(void)
{
- platform_device_unregister(&the_pdev);
+ del_platform_devices();
platform_driver_unregister(&vhci_driver);
+ kfree(vhci_pdevs);
}
module_init(vhci_hcd_init);
diff --git a/drivers/usb/usbip/vhci_rx.c b/drivers/usb/usbip/vhci_rx.c
index d656e0edc3d5..fc2d319e2360 100644
--- a/drivers/usb/usbip/vhci_rx.c
+++ b/drivers/usb/usbip/vhci_rx.c
@@ -70,6 +70,7 @@ struct urb *pickup_urb_and_free_priv(struct vhci_device *vdev, __u32 seqnum)
static void vhci_recv_ret_submit(struct vhci_device *vdev,
struct usbip_header *pdu)
{
+ struct vhci_hcd *vhci = vdev_to_vhci(vdev);
struct usbip_device *ud = &vdev->ud;
struct urb *urb;
unsigned long flags;
@@ -81,7 +82,7 @@ static void vhci_recv_ret_submit(struct vhci_device *vdev,
if (!urb) {
pr_err("cannot find a urb of seqnum %u\n", pdu->base.seqnum);
pr_info("max seqnum %d\n",
- atomic_read(&the_controller->seqnum));
+ atomic_read(&vhci->seqnum));
usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
return;
}
@@ -105,11 +106,11 @@ static void vhci_recv_ret_submit(struct vhci_device *vdev,
usbip_dbg_vhci_rx("now giveback urb %p\n", urb);
- spin_lock_irqsave(&the_controller->lock, flags);
- usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb);
- spin_unlock_irqrestore(&the_controller->lock, flags);
+ spin_lock_irqsave(&vhci->lock, flags);
+ usb_hcd_unlink_urb_from_ep(vhci_to_hcd(vhci), urb);
+ spin_unlock_irqrestore(&vhci->lock, flags);
- usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, urb->status);
+ usb_hcd_giveback_urb(vhci_to_hcd(vhci), urb, urb->status);
usbip_dbg_vhci_rx("Leave\n");
}
@@ -142,6 +143,7 @@ static struct vhci_unlink *dequeue_pending_unlink(struct vhci_device *vdev,
static void vhci_recv_ret_unlink(struct vhci_device *vdev,
struct usbip_header *pdu)
{
+ struct vhci_hcd *vhci = vdev_to_vhci(vdev);
struct vhci_unlink *unlink;
struct urb *urb;
unsigned long flags;
@@ -174,12 +176,11 @@ static void vhci_recv_ret_unlink(struct vhci_device *vdev,
urb->status = pdu->u.ret_unlink.status;
pr_info("urb->status %d\n", urb->status);
- spin_lock_irqsave(&the_controller->lock, flags);
- usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb);
- spin_unlock_irqrestore(&the_controller->lock, flags);
+ spin_lock_irqsave(&vhci->lock, flags);
+ usb_hcd_unlink_urb_from_ep(vhci_to_hcd(vhci), urb);
+ spin_unlock_irqrestore(&vhci->lock, flags);
- usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb,
- urb->status);
+ usb_hcd_giveback_urb(vhci_to_hcd(vhci), urb, urb->status);
}
kfree(unlink);
diff --git a/drivers/usb/usbip/vhci_sysfs.c b/drivers/usb/usbip/vhci_sysfs.c
index 5b5462eb1665..c404017c1b5a 100644
--- a/drivers/usb/usbip/vhci_sysfs.c
+++ b/drivers/usb/usbip/vhci_sysfs.c
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2003-2008 Takahiro Hirofuchi
+ * Copyright (C) 2015-2016 Nobuo Iwata
*
* This is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -20,6 +21,8 @@
#include <linux/kthread.h>
#include <linux/file.h>
#include <linux/net.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
#include "usbip_common.h"
#include "vhci.h"
@@ -27,106 +30,190 @@
/* TODO: refine locking ?*/
/* Sysfs entry to show port status */
-static ssize_t status_show(struct device *dev, struct device_attribute *attr,
- char *out)
+static ssize_t status_show_vhci(int pdev_nr, char *out)
{
+ struct platform_device *pdev = *(vhci_pdevs + pdev_nr);
+ struct vhci_hcd *vhci;
char *s = out;
int i = 0;
unsigned long flags;
- BUG_ON(!the_controller || !out);
+ if (!pdev || !out) {
+ usbip_dbg_vhci_sysfs("show status error\n");
+ return 0;
+ }
+
+ vhci = hcd_to_vhci(platform_get_drvdata(pdev));
- spin_lock_irqsave(&the_controller->lock, flags);
+ spin_lock_irqsave(&vhci->lock, flags);
/*
* output example:
- * prt sta spd dev socket local_busid
- * 000 004 000 000 c5a7bb80 1-2.3
- * 001 004 000 000 d8cee980 2-3.4
+ * port sta spd dev socket local_busid
+ * 0000 004 000 00000000 c5a7bb80 1-2.3
+ * 0001 004 000 00000000 d8cee980 2-3.4
*
* IP address can be retrieved from a socket pointer address by looking
* up /proc/net/{tcp,tcp6}. Also, a userland program may remember a
* port number and its peer IP address.
*/
- out += sprintf(out,
- "prt sta spd bus dev socket local_busid\n");
-
- for (i = 0; i < VHCI_NPORTS; i++) {
- struct vhci_device *vdev = port_to_vdev(i);
+ for (i = 0; i < VHCI_HC_PORTS; i++) {
+ struct vhci_device *vdev = &vhci->vdev[i];
spin_lock(&vdev->ud.lock);
- out += sprintf(out, "%03u %03u ", i, vdev->ud.status);
+ out += sprintf(out, "%04u %03u ",
+ (pdev_nr * VHCI_HC_PORTS) + i,
+ vdev->ud.status);
if (vdev->ud.status == VDEV_ST_USED) {
out += sprintf(out, "%03u %08x ",
- vdev->speed, vdev->devid);
- out += sprintf(out, "%16p ", vdev->ud.tcp_socket);
- out += sprintf(out, "%s", dev_name(&vdev->udev->dev));
+ vdev->speed, vdev->devid);
+ out += sprintf(out, "%16p %s",
+ vdev->ud.tcp_socket,
+ dev_name(&vdev->udev->dev));
} else {
- out += sprintf(out, "000 000 000 0000000000000000 0-0");
+ out += sprintf(out, "000 00000000 ");
+ out += sprintf(out, "0000000000000000 0-0");
}
out += sprintf(out, "\n");
spin_unlock(&vdev->ud.lock);
}
- spin_unlock_irqrestore(&the_controller->lock, flags);
+ spin_unlock_irqrestore(&vhci->lock, flags);
+
+ return out - s;
+}
+
+static ssize_t status_show_not_ready(int pdev_nr, char *out)
+{
+ char *s = out;
+ int i = 0;
+
+ for (i = 0; i < VHCI_HC_PORTS; i++) {
+ out += sprintf(out, "%04u %03u ",
+ (pdev_nr * VHCI_HC_PORTS) + i,
+ VDEV_ST_NOTASSIGNED);
+ out += sprintf(out, "000 00000000 0000000000000000 0-0");
+ out += sprintf(out, "\n");
+ }
+ return out - s;
+}
+
+static int status_name_to_id(const char *name)
+{
+ char *c;
+ long val;
+ int ret;
+
+ c = strchr(name, '.');
+ if (c == NULL)
+ return 0;
+ ret = kstrtol(c+1, 10, &val);
+ if (ret < 0)
+ return ret;
+
+ return val;
+}
+
+static ssize_t status_show(struct device *dev,
+ struct device_attribute *attr, char *out)
+{
+ char *s = out;
+ int pdev_nr;
+
+ out += sprintf(out,
+ "port sta spd dev socket local_busid\n");
+
+ pdev_nr = status_name_to_id(attr->attr.name);
+ if (pdev_nr < 0)
+ out += status_show_not_ready(pdev_nr, out);
+ else
+ out += status_show_vhci(pdev_nr, out);
+
+ return out - s;
+}
+
+static ssize_t nports_show(struct device *dev, struct device_attribute *attr,
+ char *out)
+{
+ char *s = out;
+
+ out += sprintf(out, "%d\n", VHCI_HC_PORTS * vhci_num_controllers);
return out - s;
}
-static DEVICE_ATTR_RO(status);
+static DEVICE_ATTR_RO(nports);
/* Sysfs entry to shutdown a virtual connection */
-static int vhci_port_disconnect(__u32 rhport)
+static int vhci_port_disconnect(struct vhci_hcd *vhci, __u32 rhport)
{
- struct vhci_device *vdev;
+ struct vhci_device *vdev = &vhci->vdev[rhport];
unsigned long flags;
usbip_dbg_vhci_sysfs("enter\n");
/* lock */
- spin_lock_irqsave(&the_controller->lock, flags);
-
- vdev = port_to_vdev(rhport);
-
+ spin_lock_irqsave(&vhci->lock, flags);
spin_lock(&vdev->ud.lock);
+
if (vdev->ud.status == VDEV_ST_NULL) {
pr_err("not connected %d\n", vdev->ud.status);
/* unlock */
spin_unlock(&vdev->ud.lock);
- spin_unlock_irqrestore(&the_controller->lock, flags);
+ spin_unlock_irqrestore(&vhci->lock, flags);
return -EINVAL;
}
/* unlock */
spin_unlock(&vdev->ud.lock);
- spin_unlock_irqrestore(&the_controller->lock, flags);
+ spin_unlock_irqrestore(&vhci->lock, flags);
usbip_event_add(&vdev->ud, VDEV_EVENT_DOWN);
return 0;
}
+static int valid_port(__u32 pdev_nr, __u32 rhport)
+{
+ if (pdev_nr >= vhci_num_controllers) {
+ pr_err("pdev %u\n", pdev_nr);
+ return 0;
+ }
+ if (rhport >= VHCI_HC_PORTS) {
+ pr_err("rhport %u\n", rhport);
+ return 0;
+ }
+ return 1;
+}
+
static ssize_t store_detach(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- int err;
- __u32 rhport = 0;
+ __u32 port = 0, pdev_nr = 0, rhport = 0;
+ struct usb_hcd *hcd;
+ int ret;
- if (sscanf(buf, "%u", &rhport) != 1)
+ if (kstrtoint(buf, 10, &port) < 0)
return -EINVAL;
- /* check rhport */
- if (rhport >= VHCI_NPORTS) {
- dev_err(dev, "invalid port %u\n", rhport);
+ pdev_nr = port_to_pdev_nr(port);
+ rhport = port_to_rhport(port);
+
+ if (!valid_port(pdev_nr, rhport))
return -EINVAL;
+
+ hcd = platform_get_drvdata(*(vhci_pdevs + pdev_nr));
+ if (hcd == NULL) {
+ dev_err(dev, "port is not ready %u\n", port);
+ return -EAGAIN;
}
- err = vhci_port_disconnect(rhport);
- if (err < 0)
+ ret = vhci_port_disconnect(hcd_to_vhci(hcd), rhport);
+ if (ret < 0)
return -EINVAL;
usbip_dbg_vhci_sysfs("Leave\n");
@@ -135,16 +222,12 @@ static ssize_t store_detach(struct device *dev, struct device_attribute *attr,
}
static DEVICE_ATTR(detach, S_IWUSR, NULL, store_detach);
-/* Sysfs entry to establish a virtual connection */
-static int valid_args(__u32 rhport, enum usb_device_speed speed)
+static int valid_args(__u32 pdev_nr, __u32 rhport, enum usb_device_speed speed)
{
- /* check rhport */
- if (rhport >= VHCI_NPORTS) {
- pr_err("port %u\n", rhport);
- return -EINVAL;
+ if (!valid_port(pdev_nr, rhport)) {
+ return 0;
}
- /* check speed */
switch (speed) {
case USB_SPEED_LOW:
case USB_SPEED_FULL:
@@ -154,12 +237,13 @@ static int valid_args(__u32 rhport, enum usb_device_speed speed)
default:
pr_err("Failed attach request for unsupported USB speed: %s\n",
usb_speed_string(speed));
- return -EINVAL;
+ return 0;
}
- return 0;
+ return 1;
}
+/* Sysfs entry to establish a virtual connection */
/*
* To start a new USB/IP attachment, a userland program needs to setup a TCP
* connection and then write its socket descriptor with remote device
@@ -174,10 +258,12 @@ static int valid_args(__u32 rhport, enum usb_device_speed speed)
static ssize_t store_attach(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct vhci_device *vdev;
struct socket *socket;
int sockfd = 0;
- __u32 rhport = 0, devid = 0, speed = 0;
+ __u32 port = 0, pdev_nr = 0, rhport = 0, devid = 0, speed = 0;
+ struct usb_hcd *hcd;
+ struct vhci_hcd *vhci;
+ struct vhci_device *vdev;
int err;
unsigned long flags;
@@ -187,16 +273,28 @@ static ssize_t store_attach(struct device *dev, struct device_attribute *attr,
* @devid: unique device identifier in a remote host
* @speed: usb device speed in a remote host
*/
- if (sscanf(buf, "%u %u %u %u", &rhport, &sockfd, &devid, &speed) != 4)
+ if (sscanf(buf, "%u %u %u %u", &port, &sockfd, &devid, &speed) != 4)
return -EINVAL;
+ pdev_nr = port_to_pdev_nr(port);
+ rhport = port_to_rhport(port);
- usbip_dbg_vhci_sysfs("rhport(%u) sockfd(%u) devid(%u) speed(%u)\n",
- rhport, sockfd, devid, speed);
+ usbip_dbg_vhci_sysfs("port(%u) pdev(%d) rhport(%u)\n",
+ port, pdev_nr, rhport);
+ usbip_dbg_vhci_sysfs("sockfd(%u) devid(%u) speed(%u)\n",
+ sockfd, devid, speed);
/* check received parameters */
- if (valid_args(rhport, speed) < 0)
+ if (!valid_args(pdev_nr, rhport, speed))
return -EINVAL;
+ hcd = platform_get_drvdata(*(vhci_pdevs + pdev_nr));
+ if (hcd == NULL) {
+ dev_err(dev, "port %d is not ready\n", port);
+ return -EAGAIN;
+ }
+ vhci = hcd_to_vhci(hcd);
+ vdev = &vhci->vdev[rhport];
+
/* Extract socket from fd. */
socket = sockfd_lookup(sockfd, &err);
if (!socket)
@@ -205,14 +303,13 @@ static ssize_t store_attach(struct device *dev, struct device_attribute *attr,
/* now need lock until setting vdev status as used */
/* begin a lock */
- spin_lock_irqsave(&the_controller->lock, flags);
- vdev = port_to_vdev(rhport);
+ spin_lock_irqsave(&vhci->lock, flags);
spin_lock(&vdev->ud.lock);
if (vdev->ud.status != VDEV_ST_NULL) {
/* end of the lock */
spin_unlock(&vdev->ud.lock);
- spin_unlock_irqrestore(&the_controller->lock, flags);
+ spin_unlock_irqrestore(&vhci->lock, flags);
sockfd_put(socket);
@@ -220,9 +317,10 @@ static ssize_t store_attach(struct device *dev, struct device_attribute *attr,
return -EINVAL;
}
- dev_info(dev,
- "rhport(%u) sockfd(%d) devid(%u) speed(%u) speed_str(%s)\n",
- rhport, sockfd, devid, speed, usb_speed_string(speed));
+ dev_info(dev, "pdev(%u) rhport(%u) sockfd(%d)\n",
+ pdev_nr, rhport, sockfd);
+ dev_info(dev, "devid(%u) speed(%u) speed_str(%s)\n",
+ devid, speed, usb_speed_string(speed));
vdev->devid = devid;
vdev->speed = speed;
@@ -230,26 +328,92 @@ static ssize_t store_attach(struct device *dev, struct device_attribute *attr,
vdev->ud.status = VDEV_ST_NOTASSIGNED;
spin_unlock(&vdev->ud.lock);
- spin_unlock_irqrestore(&the_controller->lock, flags);
+ spin_unlock_irqrestore(&vhci->lock, flags);
/* end the lock */
vdev->ud.tcp_rx = kthread_get_run(vhci_rx_loop, &vdev->ud, "vhci_rx");
vdev->ud.tcp_tx = kthread_get_run(vhci_tx_loop, &vdev->ud, "vhci_tx");
- rh_port_connect(rhport, speed);
+ rh_port_connect(vdev, speed);
return count;
}
static DEVICE_ATTR(attach, S_IWUSR, NULL, store_attach);
-static struct attribute *dev_attrs[] = {
- &dev_attr_status.attr,
- &dev_attr_detach.attr,
- &dev_attr_attach.attr,
- &dev_attr_usbip_debug.attr,
- NULL,
+#define MAX_STATUS_NAME 16
+
+struct status_attr {
+ struct device_attribute attr;
+ char name[MAX_STATUS_NAME+1];
};
-const struct attribute_group dev_attr_group = {
- .attrs = dev_attrs,
+static struct status_attr *status_attrs;
+
+static void set_status_attr(int id)
+{
+ struct status_attr *status;
+
+ status = status_attrs + id;
+ if (id == 0)
+ strcpy(status->name, "status");
+ else
+ snprintf(status->name, MAX_STATUS_NAME+1, "status.%d", id);
+ status->attr.attr.name = status->name;
+ status->attr.attr.mode = S_IRUGO;
+ status->attr.show = status_show;
+}
+
+static int init_status_attrs(void)
+{
+ int id;
+
+ status_attrs = kcalloc(vhci_num_controllers, sizeof(struct status_attr),
+ GFP_KERNEL);
+ if (status_attrs == NULL)
+ return -ENOMEM;
+
+ for (id = 0; id < vhci_num_controllers; id++)
+ set_status_attr(id);
+
+ return 0;
+}
+
+static void finish_status_attrs(void)
+{
+ kfree(status_attrs);
+}
+
+struct attribute_group vhci_attr_group = {
+ .attrs = NULL,
};
+
+int vhci_init_attr_group(void)
+{
+ struct attribute **attrs;
+ int ret, i;
+
+ attrs = kcalloc((vhci_num_controllers + 5), sizeof(struct attribute *),
+ GFP_KERNEL);
+ if (attrs == NULL)
+ return -ENOMEM;
+
+ ret = init_status_attrs();
+ if (ret) {
+ kfree(attrs);
+ return ret;
+ }
+ *attrs = &dev_attr_nports.attr;
+ *(attrs + 1) = &dev_attr_detach.attr;
+ *(attrs + 2) = &dev_attr_attach.attr;
+ *(attrs + 3) = &dev_attr_usbip_debug.attr;
+ for (i = 0; i < vhci_num_controllers; i++)
+ *(attrs + i + 4) = &((status_attrs + i)->attr.attr);
+ vhci_attr_group.attrs = attrs;
+ return 0;
+}
+
+void vhci_finish_attr_group(void)
+{
+ finish_status_attrs();
+ kfree(vhci_attr_group.attrs);
+}
diff --git a/drivers/usb/usbip/vudc_dev.c b/drivers/usb/usbip/vudc_dev.c
index 8994a13819ab..7091848df6c8 100644
--- a/drivers/usb/usbip/vudc_dev.c
+++ b/drivers/usb/usbip/vudc_dev.c
@@ -450,7 +450,7 @@ static void vudc_shutdown(struct usbip_device *ud)
if (ud->tcp_socket)
kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR);
- if (ud->tcp_tx) {
+ if (ud->tcp_rx) {
kthread_stop_put(ud->tcp_rx);
ud->tcp_rx = NULL;
}
diff --git a/drivers/usb/usbip/vudc_rx.c b/drivers/usb/usbip/vudc_rx.c
index 344bd9473475..e429b59f6f8a 100644
--- a/drivers/usb/usbip/vudc_rx.c
+++ b/drivers/usb/usbip/vudc_rx.c
@@ -142,7 +142,7 @@ static int v_recv_cmd_submit(struct vudc *udc,
urb_p->urb->status = -EINPROGRESS;
/* FIXME: more pipe setup to please usbip_common */
- urb_p->urb->pipe &= ~(11 << 30);
+ urb_p->urb->pipe &= ~(3 << 30);
switch (urb_p->ep->type) {
case USB_ENDPOINT_XFER_BULK:
urb_p->urb->pipe |= (PIPE_BULK << 30);
diff --git a/drivers/usb/wusbcore/cbaf.c b/drivers/usb/wusbcore/cbaf.c
index da1b872918b5..fb70cbef0671 100644
--- a/drivers/usb/wusbcore/cbaf.c
+++ b/drivers/usb/wusbcore/cbaf.c
@@ -610,8 +610,7 @@ static int cbaf_probe(struct usb_interface *iface,
cbaf->usb_iface = usb_get_intf(iface);
result = cbaf_check(cbaf);
if (result < 0) {
- dev_err(dev, "This device is not WUSB-CBAF compliant"
- "and is not supported yet.\n");
+ dev_err(dev, "This device is not WUSB-CBAF compliant and is not supported yet.\n");
goto error_check;
}
diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c
index 33acd1599e99..79b2b628066d 100644
--- a/drivers/usb/wusbcore/crypto.c
+++ b/drivers/usb/wusbcore/crypto.c
@@ -229,10 +229,8 @@ static int wusb_ccm_mac(struct crypto_skcipher *tfm_cbc,
zero_padding = sizeof(struct aes_ccm_block) - zero_padding;
dst_size = blen + sizeof(b0) + sizeof(b1) + zero_padding;
dst_buf = kzalloc(dst_size, GFP_KERNEL);
- if (dst_buf == NULL) {
- printk(KERN_ERR "E: can't alloc destination buffer\n");
+ if (!dst_buf)
goto error_dst_buf;
- }
memset(iv, 0, sizeof(iv));
diff --git a/drivers/usb/wusbcore/security.c b/drivers/usb/wusbcore/security.c
index b66faaf3e842..8c9421b69da0 100644
--- a/drivers/usb/wusbcore/security.c
+++ b/drivers/usb/wusbcore/security.c
@@ -374,10 +374,8 @@ int wusb_dev_4way_handshake(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev,
struct wusb_keydvt_out keydvt_out;
hs = kcalloc(3, sizeof(hs[0]), GFP_KERNEL);
- if (hs == NULL) {
- dev_err(dev, "can't allocate handshake data\n");
+ if (!hs)
goto error_kzalloc;
- }
/* We need to turn encryption before beginning the 4way
* hshake (WUSB1.0[.3.2.2]) */
diff --git a/drivers/usb/wusbcore/wa-nep.c b/drivers/usb/wusbcore/wa-nep.c
index 60a10d21947d..ed4622279c63 100644
--- a/drivers/usb/wusbcore/wa-nep.c
+++ b/drivers/usb/wusbcore/wa-nep.c
@@ -271,16 +271,11 @@ int wa_nep_create(struct wahc *wa, struct usb_interface *iface)
epd = &iface->cur_altsetting->endpoint[0].desc;
wa->nep_buffer_size = 1024;
wa->nep_buffer = kmalloc(wa->nep_buffer_size, GFP_KERNEL);
- if (wa->nep_buffer == NULL) {
- dev_err(dev,
- "Unable to allocate notification's read buffer\n");
+ if (!wa->nep_buffer)
goto error_nep_buffer;
- }
wa->nep_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (wa->nep_urb == NULL) {
- dev_err(dev, "Unable to allocate notification URB\n");
+ if (wa->nep_urb == NULL)
goto error_urb_alloc;
- }
usb_fill_int_urb(wa->nep_urb, usb_dev,
usb_rcvintpipe(usb_dev, epd->bEndpointAddress),
wa->nep_buffer, wa->nep_buffer_size,
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
index 69af4fd9e072..167fcc71f5f6 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -2865,10 +2865,8 @@ int wa_dti_start(struct wahc *wa)
goto out;
wa->dti_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (wa->dti_urb == NULL) {
- dev_err(dev, "Can't allocate DTI URB\n");
+ if (wa->dti_urb == NULL)
goto error_dti_urb_alloc;
- }
usb_fill_bulk_urb(
wa->dti_urb, wa->usb_dev,
usb_rcvbulkpipe(wa->usb_dev, 0x80 | dti_epd->bEndpointAddress),
diff --git a/drivers/uwb/hwa-rc.c b/drivers/uwb/hwa-rc.c
index 0257f35cfb9d..0aa6c3c29d17 100644
--- a/drivers/uwb/hwa-rc.c
+++ b/drivers/uwb/hwa-rc.c
@@ -701,10 +701,8 @@ static int hwarc_neep_init(struct uwb_rc *rc)
goto error_rd_buffer;
}
hwarc->neep_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (hwarc->neep_urb == NULL) {
- dev_err(dev, "Unable to allocate notification URB\n");
+ if (hwarc->neep_urb == NULL)
goto error_urb_alloc;
- }
usb_fill_int_urb(hwarc->neep_urb, usb_dev,
usb_rcvintpipe(usb_dev, epd->bEndpointAddress),
hwarc->rd_buffer, PAGE_SIZE,
diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c
index 68952d9ccf83..99ebf6ea3de6 100644
--- a/drivers/watchdog/pcwd_usb.c
+++ b/drivers/watchdog/pcwd_usb.c
@@ -666,10 +666,8 @@ static int usb_pcwd_probe(struct usb_interface *interface,
/* allocate the urb's */
usb_pcwd->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!usb_pcwd->intr_urb) {
- pr_err("Out of memory\n");
+ if (!usb_pcwd->intr_urb)
goto error;
- }
/* initialise the intr urb's */
usb_fill_int_urb(usb_pcwd->intr_urb, udev, pipe,
diff --git a/include/linux/bcma/bcma_regs.h b/include/linux/bcma/bcma_regs.h
index ebd5c1fcdea4..4901fb358b07 100644
--- a/include/linux/bcma/bcma_regs.h
+++ b/include/linux/bcma/bcma_regs.h
@@ -10,6 +10,7 @@
#define BCMA_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */
#define BCMA_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */
#define BCMA_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */
+#define BCMA_CLKCTLST_HQCLKREQ 0x00000040 /* HQ Clock */
#define BCMA_CLKCTLST_EXTRESREQ 0x00000700 /* Mask of external resource requests */
#define BCMA_CLKCTLST_EXTRESREQ_SHIFT 8
#define BCMA_CLKCTLST_HAVEALP 0x00010000 /* ALP available */
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index 61004413dc64..b871c0cb1f02 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -29,6 +29,15 @@
#include <linux/device.h>
/*
+ * Define the type of supported external connectors
+ */
+#define EXTCON_TYPE_USB BIT(0) /* USB connector */
+#define EXTCON_TYPE_CHG BIT(1) /* Charger connector */
+#define EXTCON_TYPE_JACK BIT(2) /* Jack connector */
+#define EXTCON_TYPE_DISP BIT(3) /* Display connector */
+#define EXTCON_TYPE_MISC BIT(4) /* Miscellaneous connector */
+
+/*
* Define the unique id of supported external connectors
*/
#define EXTCON_NONE 0
@@ -44,6 +53,7 @@
#define EXTCON_CHG_USB_ACA 8 /* Accessory Charger Adapter */
#define EXTCON_CHG_USB_FAST 9
#define EXTCON_CHG_USB_SLOW 10
+#define EXTCON_CHG_WPT 11 /* Wireless Power Transfer */
/* Jack external connector */
#define EXTCON_JACK_MICROPHONE 20
@@ -60,6 +70,8 @@
#define EXTCON_DISP_MHL 41 /* Mobile High-Definition Link */
#define EXTCON_DISP_DVI 42 /* Digital Visual Interface */
#define EXTCON_DISP_VGA 43 /* Video Graphics Array */
+#define EXTCON_DISP_DP 44 /* Display Port */
+#define EXTCON_DISP_HMD 45 /* Head-Mounted Display */
/* Miscellaneous external connector */
#define EXTCON_DOCK 60
@@ -68,6 +80,85 @@
#define EXTCON_NUM 63
+/*
+ * Define the property of supported external connectors.
+ *
+ * When adding the new extcon property, they *must* have
+ * the type/value/default information. Also, you *have to*
+ * modify the EXTCON_PROP_[type]_START/END definitions
+ * which mean the range of the supported properties
+ * for each extcon type.
+ *
+ * The naming style of property
+ * : EXTCON_PROP_[type]_[property name]
+ *
+ * EXTCON_PROP_USB_[property name] : USB property
+ * EXTCON_PROP_CHG_[property name] : Charger property
+ * EXTCON_PROP_JACK_[property name] : Jack property
+ * EXTCON_PROP_DISP_[property name] : Display property
+ */
+
+/*
+ * Properties of EXTCON_TYPE_USB.
+ *
+ * - EXTCON_PROP_USB_VBUS
+ * @type: integer (intval)
+ * @value: 0 (low) or 1 (high)
+ * @default: 0 (low)
+ * - EXTCON_PROP_USB_TYPEC_POLARITY
+ * @type: integer (intval)
+ * @value: 0 (normal) or 1 (flip)
+ * @default: 0 (normal)
+ * - EXTCON_PROP_USB_SS (SuperSpeed)
+ * @type: integer (intval)
+ * @value: 0 (USB/USB2) or 1 (USB3)
+ * @default: 0 (USB/USB2)
+ *
+ */
+#define EXTCON_PROP_USB_VBUS 0
+#define EXTCON_PROP_USB_TYPEC_POLARITY 1
+#define EXTCON_PROP_USB_SS 2
+
+#define EXTCON_PROP_USB_MIN 0
+#define EXTCON_PROP_USB_MAX 2
+#define EXTCON_PROP_USB_CNT (EXTCON_PROP_USB_MAX - EXTCON_PROP_USB_MIN + 1)
+
+/* Properties of EXTCON_TYPE_CHG. */
+#define EXTCON_PROP_CHG_MIN 50
+#define EXTCON_PROP_CHG_MAX 50
+#define EXTCON_PROP_CHG_CNT (EXTCON_PROP_CHG_MAX - EXTCON_PROP_CHG_MIN + 1)
+
+/* Properties of EXTCON_TYPE_JACK. */
+#define EXTCON_PROP_JACK_MIN 100
+#define EXTCON_PROP_JACK_MAX 100
+#define EXTCON_PROP_JACK_CNT (EXTCON_PROP_JACK_MAX - EXTCON_PROP_JACK_MIN + 1)
+
+/*
+ * Properties of EXTCON_TYPE_DISP.
+ *
+ * - EXTCON_PROP_DISP_HPD (Hot Plug Detect)
+ * @type: integer (intval)
+ * @value: 0 (no hpd) or 1 (hpd)
+ * @default: 0 (no hpd)
+ *
+ */
+#define EXTCON_PROP_DISP_HPD 150
+
+/* Properties of EXTCON_TYPE_DISP. */
+#define EXTCON_PROP_DISP_MIN 150
+#define EXTCON_PROP_DISP_MAX 151
+#define EXTCON_PROP_DISP_CNT (EXTCON_PROP_DISP_MAX - EXTCON_PROP_DISP_MIN + 1)
+
+/*
+ * Define the type of property's value.
+ *
+ * Define the property's value as union type. Because each property
+ * would need the different data type to store it.
+ */
+union extcon_property_value {
+ int intval; /* type : integer (intval) */
+};
+
struct extcon_cable;
/**
@@ -150,26 +241,42 @@ extern struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
extern void devm_extcon_dev_free(struct device *dev, struct extcon_dev *edev);
/*
- * get/set/update_state access the 32b encoded state value, which represents
- * states of all possible cables of the multistate port. For example, if one
- * calls extcon_set_state(edev, 0x7), it may mean that all the three cables
- * are attached to the port.
+ * get/set_state access each bit of the 32b encoded state value.
+ * They are used to access the status of each cable based on the cable id.
*/
-static inline u32 extcon_get_state(struct extcon_dev *edev)
-{
- return edev->state;
-}
+extern int extcon_get_state(struct extcon_dev *edev, unsigned int id);
+extern int extcon_set_state(struct extcon_dev *edev, unsigned int id,
+ bool cable_state);
+extern int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
+ bool cable_state);
+/*
+ * Synchronize the state and property data for a specific external connector.
+ */
+extern int extcon_sync(struct extcon_dev *edev, unsigned int id);
-extern int extcon_set_state(struct extcon_dev *edev, u32 state);
-extern int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state);
+/*
+ * get/set_property access the property value of each external connector.
+ * They are used to access the property of each cable based on the property id.
+ */
+extern int extcon_get_property(struct extcon_dev *edev, unsigned int id,
+ unsigned int prop,
+ union extcon_property_value *prop_val);
+extern int extcon_set_property(struct extcon_dev *edev, unsigned int id,
+ unsigned int prop,
+ union extcon_property_value prop_val);
+extern int extcon_set_property_sync(struct extcon_dev *edev, unsigned int id,
+ unsigned int prop,
+ union extcon_property_value prop_val);
/*
- * get/set_cable_state access each bit of the 32b encoded state value.
- * They are used to access the status of each cable based on the cable id.
+ * get/set_property_capability set the capability of the property for each
+ * external connector. They are used to set the capability of the property
+ * of each external connector based on the id and property.
*/
-extern int extcon_get_cable_state_(struct extcon_dev *edev, unsigned int id);
-extern int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id,
- bool cable_state);
+extern int extcon_get_property_capability(struct extcon_dev *edev,
+ unsigned int id, unsigned int prop);
+extern int extcon_set_property_capability(struct extcon_dev *edev,
+ unsigned int id, unsigned int prop);
/*
* Following APIs are to monitor every action of a notifier.
@@ -232,30 +339,57 @@ static inline struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
static inline void devm_extcon_dev_free(struct extcon_dev *edev) { }
-static inline u32 extcon_get_state(struct extcon_dev *edev)
+
+static inline int extcon_get_state(struct extcon_dev *edev, unsigned int id)
+{
+ return 0;
+}
+
+static inline int extcon_set_state(struct extcon_dev *edev, unsigned int id,
+ bool cable_state)
+{
+ return 0;
+}
+
+static inline int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
+ bool cable_state)
{
return 0;
}
-static inline int extcon_set_state(struct extcon_dev *edev, u32 state)
+static inline int extcon_sync(struct extcon_dev *edev, unsigned int id)
{
return 0;
}
-static inline int extcon_update_state(struct extcon_dev *edev, u32 mask,
- u32 state)
+static inline int extcon_get_property(struct extcon_dev *edev, unsigned int id,
+ unsigned int prop,
+ union extcon_property_value *prop_val)
+{
+ return 0;
+}
+static inline int extcon_set_property(struct extcon_dev *edev, unsigned int id,
+ unsigned int prop,
+ union extcon_property_value prop_val)
{
return 0;
}
-static inline int extcon_get_cable_state_(struct extcon_dev *edev,
- unsigned int id)
+static inline int extcon_set_property_sync(struct extcon_dev *edev,
+ unsigned int id, unsigned int prop,
+ union extcon_property_value prop_val)
{
return 0;
}
-static inline int extcon_set_cable_state_(struct extcon_dev *edev,
- unsigned int id, bool cable_state)
+static inline int extcon_get_property_capability(struct extcon_dev *edev,
+ unsigned int id, unsigned int prop)
+{
+ return 0;
+}
+
+static inline int extcon_set_property_capability(struct extcon_dev *edev,
+ unsigned int id, unsigned int prop)
{
return 0;
}
@@ -320,4 +454,15 @@ static inline int extcon_unregister_interest(struct extcon_specific_cable_nb
{
return -EINVAL;
}
+
+static inline int extcon_get_cable_state_(struct extcon_dev *edev, unsigned int id)
+{
+ return extcon_get_state(edev, id);
+}
+
+static inline int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id,
+ bool cable_state)
+{
+ return extcon_set_state_sync(edev, id, cable_state);
+}
#endif /* __LINUX_EXTCON_H__ */
diff --git a/include/linux/extcon/extcon-adc-jack.h b/include/linux/extcon/extcon-adc-jack.h
index ac85f2061351..a0e03b13b449 100644
--- a/include/linux/extcon/extcon-adc-jack.h
+++ b/include/linux/extcon/extcon-adc-jack.h
@@ -20,8 +20,8 @@
/**
* struct adc_jack_cond - condition to use an extcon state
- * @state: the corresponding extcon state (if 0, this struct
* denotes the last adc_jack_cond element among the array)
+ * @id: the unique id of each external connector
* @min_adc: min adc value for this condition
* @max_adc: max adc value for this condition
*
@@ -33,7 +33,7 @@
* because when no adc_jack_cond is met, state = 0 is automatically chosen.
*/
struct adc_jack_cond {
- u32 state; /* extcon state value. 0 if invalid */
+ unsigned int id;
u32 min_adc;
u32 max_adc;
};
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index f08b67238b58..ee1bed7dbfc6 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -36,6 +36,7 @@ enum phy_mode {
* @power_on: powering on the phy
* @power_off: powering off the phy
* @set_mode: set the mode of the phy
+ * @reset: resetting the phy
* @owner: the module owner containing the ops
*/
struct phy_ops {
@@ -44,6 +45,7 @@ struct phy_ops {
int (*power_on)(struct phy *phy);
int (*power_off)(struct phy *phy);
int (*set_mode)(struct phy *phy, enum phy_mode mode);
+ int (*reset)(struct phy *phy);
struct module *owner;
};
@@ -136,6 +138,7 @@ int phy_exit(struct phy *phy);
int phy_power_on(struct phy *phy);
int phy_power_off(struct phy *phy);
int phy_set_mode(struct phy *phy, enum phy_mode mode);
+int phy_reset(struct phy *phy);
static inline int phy_get_bus_width(struct phy *phy)
{
return phy->attrs.bus_width;
diff --git a/include/linux/ulpi/driver.h b/include/linux/ulpi/driver.h
index 388f6e08b9d4..a7af21a55248 100644
--- a/include/linux/ulpi/driver.h
+++ b/include/linux/ulpi/driver.h
@@ -15,7 +15,7 @@ struct ulpi_ops;
*/
struct ulpi {
struct ulpi_device_id id;
- struct ulpi_ops *ops;
+ const struct ulpi_ops *ops;
struct device dev;
};
@@ -47,7 +47,11 @@ struct ulpi_driver {
#define to_ulpi_driver(d) container_of(d, struct ulpi_driver, driver)
-int ulpi_register_driver(struct ulpi_driver *drv);
+/*
+ * use a macro to avoid include chaining to get THIS_MODULE
+ */
+#define ulpi_register_driver(drv) __ulpi_register_driver(drv, THIS_MODULE)
+int __ulpi_register_driver(struct ulpi_driver *drv, struct module *module);
void ulpi_unregister_driver(struct ulpi_driver *drv);
#define module_ulpi_driver(__ulpi_driver) \
diff --git a/include/linux/ulpi/interface.h b/include/linux/ulpi/interface.h
index 4de8ab491038..a2011a919eb6 100644
--- a/include/linux/ulpi/interface.h
+++ b/include/linux/ulpi/interface.h
@@ -4,20 +4,19 @@
#include <linux/types.h>
struct ulpi;
+struct device;
/**
* struct ulpi_ops - ULPI register access
- * @dev: the interface provider
* @read: read operation for ULPI register access
* @write: write operation for ULPI register access
*/
struct ulpi_ops {
- struct device *dev;
- int (*read)(struct ulpi_ops *ops, u8 addr);
- int (*write)(struct ulpi_ops *ops, u8 addr, u8 val);
+ int (*read)(struct device *dev, u8 addr);
+ int (*write)(struct device *dev, u8 addr, u8 val);
};
-struct ulpi *ulpi_register_interface(struct device *, struct ulpi_ops *);
+struct ulpi *ulpi_register_interface(struct device *, const struct ulpi_ops *);
void ulpi_unregister_interface(struct ulpi *);
#endif /* __LINUX_ULPI_INTERFACE_H */
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 2b81b24eb5aa..4616a49a1c2e 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -220,7 +220,8 @@ struct usb_function {
int (*setup)(struct usb_function *,
const struct usb_ctrlrequest *);
bool (*req_match)(struct usb_function *,
- const struct usb_ctrlrequest *);
+ const struct usb_ctrlrequest *,
+ bool config0);
void (*suspend)(struct usb_function *);
void (*resume)(struct usb_function *);
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 612dbdfa388e..8e81f9eb95e4 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -346,6 +346,8 @@ struct usb_gadget_ops {
* or B-Peripheral wants to take host role.
* @quirk_ep_out_aligned_size: epout requires buffer size to be aligned to
* MaxPacketSize.
+ * @quirk_avoids_skb_reserve: udc/platform wants to avoid skb_reserve() in
+ * u_ether.c to improve performance.
* @is_selfpowered: if the gadget is self-powered.
* @deactivated: True if gadget is deactivated - in deactivated state it cannot
* be connected.
@@ -398,6 +400,7 @@ struct usb_gadget {
unsigned quirk_altset_not_supp:1;
unsigned quirk_stall_not_supp:1;
unsigned quirk_zlp_not_supp:1;
+ unsigned quirk_avoids_skb_reserve:1;
unsigned is_selfpowered:1;
unsigned deactivated:1;
unsigned connected:1;
@@ -418,8 +421,20 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev)
list_for_each_entry(tmp, &(gadget)->ep_list, ep_list)
/**
+ * usb_ep_align - returns @len aligned to ep's maxpacketsize.
+ * @ep: the endpoint whose maxpacketsize is used to align @len
+ * @len: buffer size's length to align to @ep's maxpacketsize
+ *
+ * This helper is used to align buffer's size to an ep's maxpacketsize.
+ */
+static inline size_t usb_ep_align(struct usb_ep *ep, size_t len)
+{
+ return round_up(len, (size_t)le16_to_cpu(ep->desc->wMaxPacketSize));
+}
+
+/**
* usb_ep_align_maybe - returns @len aligned to ep's maxpacketsize if gadget
- * requires quirk_ep_out_aligned_size, otherwise reguens len.
+ * requires quirk_ep_out_aligned_size, otherwise returns len.
* @g: controller to check for quirk
* @ep: the endpoint whose maxpacketsize is used to align @len
* @len: buffer size's length to align to @ep's maxpacketsize
@@ -430,8 +445,7 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev)
static inline size_t
usb_ep_align_maybe(struct usb_gadget *g, struct usb_ep *ep, size_t len)
{
- return !g->quirk_ep_out_aligned_size ? len :
- round_up(len, (size_t)ep->desc->wMaxPacketSize);
+ return g->quirk_ep_out_aligned_size ? usb_ep_align(ep, len) : len;
}
/**
@@ -463,6 +477,16 @@ static inline int gadget_is_zlp_supported(struct usb_gadget *g)
}
/**
+ * gadget_avoids_skb_reserve - return true iff the hardware would like to avoid
+ * skb_reserve to improve performance.
+ * @g: controller to check for quirk
+ */
+static inline int gadget_avoids_skb_reserve(struct usb_gadget *g)
+{
+ return g->quirk_avoids_skb_reserve;
+}
+
+/**
* gadget_is_dualspeed - return true iff the hardware handles high speed
* @g: controller that might support both high and full speeds
*/
diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h
index 245f57dbbb61..0aae1b2ee931 100644
--- a/include/linux/usb_usual.h
+++ b/include/linux/usb_usual.h
@@ -81,6 +81,8 @@
/* Sets max_sectors to 240 */ \
US_FLAG(NO_REPORT_LUNS, 0x10000000) \
/* Cannot handle REPORT_LUNS */ \
+ US_FLAG(ALWAYS_SYNC, 0x20000000) \
+ /* lies about caching, so always sync */ \
#define US_FLAG(name, value) US_FL_##name = value ,
enum { US_DO_ALL_FLAGS };
diff --git a/include/soc/at91/atmel-sfr.h b/include/soc/at91/atmel-sfr.h
index 2f9bb984a4df..506ea8ffda19 100644
--- a/include/soc/at91/atmel-sfr.h
+++ b/include/soc/at91/atmel-sfr.h
@@ -13,6 +13,20 @@
#ifndef _LINUX_MFD_SYSCON_ATMEL_SFR_H
#define _LINUX_MFD_SYSCON_ATMEL_SFR_H
+#define AT91_SFR_DDRCFG 0x04 /* DDR Configuration Register */
+/* 0x08 ~ 0x0c: Reserved */
+#define AT91_SFR_OHCIICR 0x10 /* OHCI INT Configuration Register */
+#define AT91_SFR_OHCIISR 0x14 /* OHCI INT Status Register */
#define AT91_SFR_I2SCLKSEL 0x90 /* I2SC Register */
+/* Field definitions */
+#define AT91_OHCIICR_SUSPEND_A BIT(8)
+#define AT91_OHCIICR_SUSPEND_B BIT(9)
+#define AT91_OHCIICR_SUSPEND_C BIT(10)
+
+#define AT91_OHCIICR_USB_SUSPEND (AT91_OHCIICR_SUSPEND_A | \
+ AT91_OHCIICR_SUSPEND_B | \
+ AT91_OHCIICR_SUSPEND_C)
+
+
#endif /* _LINUX_MFD_SYSCON_ATMEL_SFR_H */
diff --git a/include/uapi/linux/usb/functionfs.h b/include/uapi/linux/usb/functionfs.h
index 108dd7997014..acc63697a0cc 100644
--- a/include/uapi/linux/usb/functionfs.h
+++ b/include/uapi/linux/usb/functionfs.h
@@ -21,6 +21,8 @@ enum functionfs_flags {
FUNCTIONFS_HAS_MS_OS_DESC = 8,
FUNCTIONFS_VIRTUAL_ADDR = 16,
FUNCTIONFS_EVENTFD = 32,
+ FUNCTIONFS_ALL_CTRL_RECIP = 64,
+ FUNCTIONFS_CONFIG0_SETUP = 128,
};
/* Descriptor of an non-audio endpoint */