summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/video4linux/CARDLIST.bttv4
-rw-r--r--Documentation/video4linux/CARDLIST.cx889
-rw-r--r--Documentation/video4linux/CARDLIST.saa71341
-rw-r--r--Documentation/video4linux/CARDLIST.tuner3
-rw-r--r--Documentation/video4linux/CQcam.txt203
-rw-r--r--Documentation/video4linux/Zoran23
-rw-r--r--Documentation/video4linux/bttv/CONTRIBUTORS8
-rw-r--r--Documentation/video4linux/cx2341x/fw-calling.txt69
-rw-r--r--Documentation/video4linux/cx2341x/fw-decoder-api.txt319
-rw-r--r--Documentation/video4linux/cx2341x/fw-dma.txt94
-rw-r--r--Documentation/video4linux/cx2341x/fw-encoder-api.txt694
-rw-r--r--Documentation/video4linux/cx2341x/fw-memory.txt141
-rw-r--r--Documentation/video4linux/cx2341x/fw-osd-api.txt342
-rw-r--r--Documentation/video4linux/cx2341x/fw-upload.txt49
-rw-r--r--Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt54
-rw-r--r--Documentation/video4linux/et61x251.txt52
-rw-r--r--Documentation/video4linux/ibmcam.txt168
-rw-r--r--Documentation/video4linux/ov511.txt32
-rw-r--r--Documentation/video4linux/sn9c102.txt78
-rw-r--r--Documentation/video4linux/v4lgrab.c192
-rw-r--r--Documentation/video4linux/w9968cf.txt162
-rw-r--r--Documentation/video4linux/zc0301.txt80
22 files changed, 2290 insertions, 487 deletions
diff --git a/Documentation/video4linux/CARDLIST.bttv b/Documentation/video4linux/CARDLIST.bttv
index b72706c58a44..4efa4645885f 100644
--- a/Documentation/video4linux/CARDLIST.bttv
+++ b/Documentation/video4linux/CARDLIST.bttv
@@ -87,7 +87,7 @@
86 -> Osprey 101/151 w/ svid
87 -> Osprey 200/201/250/251
88 -> Osprey 200/250 [0070:ff01]
- 89 -> Osprey 210/220
+ 89 -> Osprey 210/220/230
90 -> Osprey 500 [0070:ff02]
91 -> Osprey 540 [0070:ff04]
92 -> Osprey 2000 [0070:ff03]
@@ -111,7 +111,7 @@
110 -> IVC-100 [ff00:a132]
111 -> IVC-120G [ff00:a182,ff01:a182,ff02:a182,ff03:a182,ff04:a182,ff05:a182,ff06:a182,ff07:a182,ff08:a182,ff09:a182,ff0a:a182,ff0b:a182,ff0c:a182,ff0d:a182,ff0e:a182,ff0f:a182]
112 -> pcHDTV HD-2000 TV [7063:2000]
-113 -> Twinhan DST + clones [11bd:0026,1822:0001,270f:fc00]
+113 -> Twinhan DST + clones [11bd:0026,1822:0001,270f:fc00,1822:0026]
114 -> Winfast VC100 [107d:6607]
115 -> Teppro TEV-560/InterVision IV-560
116 -> SIMUS GVC1100 [aa6a:82b2]
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 3b39a91b24bd..6cb63ddf6163 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -15,7 +15,7 @@
14 -> KWorld/VStream XPert DVB-T [17de:08a6]
15 -> DViCO FusionHDTV DVB-T1 [18ac:db00]
16 -> KWorld LTV883RF
- 17 -> DViCO FusionHDTV 3 Gold-Q [18ac:d810]
+ 17 -> DViCO FusionHDTV 3 Gold-Q [18ac:d810,18ac:d800]
18 -> Hauppauge Nova-T DVB-T [0070:9002,0070:9001]
19 -> Conexant DVB-T reference design [14f1:0187]
20 -> Provideo PV259 [1540:2580]
@@ -40,8 +40,13 @@
39 -> KWorld DVB-S 100 [17de:08b2]
40 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid [0070:9400,0070:9402]
41 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile) [0070:9800,0070:9802]
- 42 -> digitalnow DNTV Live! DVB-T Pro [1822:0025]
+ 42 -> digitalnow DNTV Live! DVB-T Pro [1822:0025,1822:0019]
43 -> KWorld/VStream XPert DVB-T with cx22702 [17de:08a1]
44 -> DViCO FusionHDTV DVB-T Dual Digital [18ac:db50,18ac:db54]
45 -> KWorld HardwareMpegTV XPert [17de:0840]
46 -> DViCO FusionHDTV DVB-T Hybrid [18ac:db40,18ac:db44]
+ 47 -> pcHDTV HD5500 HDTV [7063:5500]
+ 48 -> Kworld MCE 200 Deluxe [17de:0841]
+ 49 -> PixelView PlayTV P7000 [1554:4813]
+ 50 -> NPG Tech Real TV FM Top 10 [14f1:0842]
+ 51 -> WinFast DTV2000 H [107d:665e]
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index bca50903233f..9068b669f5ee 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -93,3 +93,4 @@
92 -> AVerMedia A169 B1 [1461:6360]
93 -> Medion 7134 Bridge #2 [16be:0005]
94 -> LifeView FlyDVB-T Hybrid Cardbus [5168:3306,5168:3502]
+ 95 -> LifeView FlyVIDEO3000 (NTSC) [5169:0138]
diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner
index 1bcdac67dd8c..44134f04b82a 100644
--- a/Documentation/video4linux/CARDLIST.tuner
+++ b/Documentation/video4linux/CARDLIST.tuner
@@ -62,7 +62,7 @@ tuner=60 - Thomson DTT 761X (ATSC/NTSC)
tuner=61 - Tena TNF9533-D/IF/TNF9533-B/DF
tuner=62 - Philips TEA5767HN FM Radio
tuner=63 - Philips FMD1216ME MK3 Hybrid Tuner
-tuner=64 - LG TDVS-H062F/TUA6034
+tuner=64 - LG TDVS-H06xF
tuner=65 - Ymec TVF66T5-B/DFF
tuner=66 - LG TALN series
tuner=67 - Philips TD1316 Hybrid Tuner
@@ -71,3 +71,4 @@ tuner=69 - Tena TNF 5335 and similar models
tuner=70 - Samsung TCPN 2121P30A
tuner=71 - Xceive xc3028
tuner=72 - Thomson FE6600
+tuner=73 - Samsung TCPG 6121P30A
diff --git a/Documentation/video4linux/CQcam.txt b/Documentation/video4linux/CQcam.txt
index 464e4cec94cb..ade8651e2443 100644
--- a/Documentation/video4linux/CQcam.txt
+++ b/Documentation/video4linux/CQcam.txt
@@ -185,207 +185,10 @@ this work is documented at the video4linux2 site listed below.
9.0 --- A sample program using v4lgrabber,
-This program is a simple image grabber that will copy a frame from the
+v4lgrab is a simple image grabber that will copy a frame from the
first video device, /dev/video0 to standard output in portable pixmap
-format (.ppm) Using this like: 'v4lgrab | convert - c-qcam.jpg'
-produced this picture of me at
- http://mug.sys.virginia.edu/~drf5n/extras/c-qcam.jpg
-
--------------------- 8< ---------------- 8< -----------------------------
-
-/* Simple Video4Linux image grabber. */
-/*
- * Video4Linux Driver Test/Example Framegrabbing Program
- *
- * Compile with:
- * gcc -s -Wall -Wstrict-prototypes v4lgrab.c -o v4lgrab
- * Use as:
- * v4lgrab >image.ppm
- *
- * Copyright (C) 1998-05-03, Phil Blundell <philb@gnu.org>
- * Copied from http://www.tazenda.demon.co.uk/phil/vgrabber.c
- * with minor modifications (Dave Forrest, drf5n@virginia.edu).
- *
- */
-
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <sys/ioctl.h>
-#include <stdlib.h>
-
-#include <linux/types.h>
-#include <linux/videodev.h>
-
-#define FILE "/dev/video0"
-
-/* Stole this from tvset.c */
-
-#define READ_VIDEO_PIXEL(buf, format, depth, r, g, b) \
-{ \
- switch (format) \
- { \
- case VIDEO_PALETTE_GREY: \
- switch (depth) \
- { \
- case 4: \
- case 6: \
- case 8: \
- (r) = (g) = (b) = (*buf++ << 8);\
- break; \
- \
- case 16: \
- (r) = (g) = (b) = \
- *((unsigned short *) buf); \
- buf += 2; \
- break; \
- } \
- break; \
- \
- \
- case VIDEO_PALETTE_RGB565: \
- { \
- unsigned short tmp = *(unsigned short *)buf; \
- (r) = tmp&0xF800; \
- (g) = (tmp<<5)&0xFC00; \
- (b) = (tmp<<11)&0xF800; \
- buf += 2; \
- } \
- break; \
- \
- case VIDEO_PALETTE_RGB555: \
- (r) = (buf[0]&0xF8)<<8; \
- (g) = ((buf[0] << 5 | buf[1] >> 3)&0xF8)<<8; \
- (b) = ((buf[1] << 2 ) & 0xF8)<<8; \
- buf += 2; \
- break; \
- \
- case VIDEO_PALETTE_RGB24: \
- (r) = buf[0] << 8; (g) = buf[1] << 8; \
- (b) = buf[2] << 8; \
- buf += 3; \
- break; \
- \
- default: \
- fprintf(stderr, \
- "Format %d not yet supported\n", \
- format); \
- } \
-}
-
-int get_brightness_adj(unsigned char *image, long size, int *brightness) {
- long i, tot = 0;
- for (i=0;i<size*3;i++)
- tot += image[i];
- *brightness = (128 - tot/(size*3))/3;
- return !((tot/(size*3)) >= 126 && (tot/(size*3)) <= 130);
-}
-
-int main(int argc, char ** argv)
-{
- int fd = open(FILE, O_RDONLY), f;
- struct video_capability cap;
- struct video_window win;
- struct video_picture vpic;
-
- unsigned char *buffer, *src;
- int bpp = 24, r, g, b;
- unsigned int i, src_depth;
-
- if (fd < 0) {
- perror(FILE);
- exit(1);
- }
-
- if (ioctl(fd, VIDIOCGCAP, &cap) < 0) {
- perror("VIDIOGCAP");
- fprintf(stderr, "(" FILE " not a video4linux device?)\n");
- close(fd);
- exit(1);
- }
-
- if (ioctl(fd, VIDIOCGWIN, &win) < 0) {
- perror("VIDIOCGWIN");
- close(fd);
- exit(1);
- }
-
- if (ioctl(fd, VIDIOCGPICT, &vpic) < 0) {
- perror("VIDIOCGPICT");
- close(fd);
- exit(1);
- }
-
- if (cap.type & VID_TYPE_MONOCHROME) {
- vpic.depth=8;
- vpic.palette=VIDEO_PALETTE_GREY; /* 8bit grey */
- if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) {
- vpic.depth=6;
- if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) {
- vpic.depth=4;
- if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) {
- fprintf(stderr, "Unable to find a supported capture format.\n");
- close(fd);
- exit(1);
- }
- }
- }
- } else {
- vpic.depth=24;
- vpic.palette=VIDEO_PALETTE_RGB24;
-
- if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) {
- vpic.palette=VIDEO_PALETTE_RGB565;
- vpic.depth=16;
-
- if(ioctl(fd, VIDIOCSPICT, &vpic)==-1) {
- vpic.palette=VIDEO_PALETTE_RGB555;
- vpic.depth=15;
-
- if(ioctl(fd, VIDIOCSPICT, &vpic)==-1) {
- fprintf(stderr, "Unable to find a supported capture format.\n");
- return -1;
- }
- }
- }
- }
-
- buffer = malloc(win.width * win.height * bpp);
- if (!buffer) {
- fprintf(stderr, "Out of memory.\n");
- exit(1);
- }
-
- do {
- int newbright;
- read(fd, buffer, win.width * win.height * bpp);
- f = get_brightness_adj(buffer, win.width * win.height, &newbright);
- if (f) {
- vpic.brightness += (newbright << 8);
- if(ioctl(fd, VIDIOCSPICT, &vpic)==-1) {
- perror("VIDIOSPICT");
- break;
- }
- }
- } while (f);
-
- fprintf(stdout, "P6\n%d %d 255\n", win.width, win.height);
-
- src = buffer;
-
- for (i = 0; i < win.width * win.height; i++) {
- READ_VIDEO_PIXEL(src, vpic.palette, src_depth, r, g, b);
- fputc(r>>8, stdout);
- fputc(g>>8, stdout);
- fputc(b>>8, stdout);
- }
-
- close(fd);
- return 0;
-}
--------------------- 8< ---------------- 8< -----------------------------
+format (.ppm) To produce .jpg output, you can use it like this:
+'v4lgrab | convert - c-qcam.jpg'
10.0 --- Other Information
diff --git a/Documentation/video4linux/Zoran b/Documentation/video4linux/Zoran
index be9f21b84555..040a2c841ae9 100644
--- a/Documentation/video4linux/Zoran
+++ b/Documentation/video4linux/Zoran
@@ -33,6 +33,21 @@ Inputs/outputs: Composite and S-video
Norms: PAL, SECAM (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps)
Card number: 7
+AverMedia 6 Eyes AVS6EYES:
+* Zoran zr36067 PCI controller
+* Zoran zr36060 MJPEG codec
+* Samsung ks0127 TV decoder
+* Conexant bt866 TV encoder
+Drivers to use: videodev, i2c-core, i2c-algo-bit,
+ videocodec, ks0127, bt866, zr36060, zr36067
+Inputs/outputs: Six physical inputs. 1-6 are composite,
+ 1-2, 3-4, 5-6 doubles as S-video,
+ 1-3 triples as component.
+ One composite output.
+Norms: PAL, SECAM (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps)
+Card number: 8
+Not autodetected, card=8 is necessary.
+
Linux Media Labs LML33:
* Zoran zr36067 PCI controller
* Zoran zr36060 MJPEG codec
@@ -192,6 +207,10 @@ Micronas vpx3220a TV decoder
was introduced in 1996, is used in the DC30 and DC30+ and
can handle: PAL B/G/H/I, PAL N, PAL M, NTSC M, NTSC 44, PAL 60, SECAM,NTSC Comb
+Samsung ks0127 TV decoder
+is used in the AVS6EYES card and
+can handle: NTSC-M/N/44, PAL-M/N/B/G/H/I/D/K/L and SECAM
+
===========================
1.2 What the TV encoder can do an what not
@@ -221,6 +240,10 @@ ITT mse3000 TV encoder
was introduced in 1991, is used in the DC10 old
can generate: PAL , NTSC , SECAM
+Conexant bt866 TV encoder
+is used in AVS6EYES, and
+can generate: NTSC/PAL, PAL­M, PAL­N
+
The adv717x, should be able to produce PAL N. But you find nothing PAL N
specific in the registers. Seem that you have to reuse a other standard
to generate PAL N, maybe it would work if you use the PAL M settings.
diff --git a/Documentation/video4linux/bttv/CONTRIBUTORS b/Documentation/video4linux/bttv/CONTRIBUTORS
index aef49db8847d..8aad6dd93d6b 100644
--- a/Documentation/video4linux/bttv/CONTRIBUTORS
+++ b/Documentation/video4linux/bttv/CONTRIBUTORS
@@ -1,4 +1,4 @@
-Contributors to bttv:
+Contributors to bttv:
Michael Chu <mmchu@pobox.com>
AverMedia fix and more flexible card recognition
@@ -8,8 +8,8 @@ Alan Cox <alan@redhat.com>
Chris Kleitsch
Hardware I2C
-
-Gerd Knorr <kraxel@cs.tu-berlin.de>
+
+Gerd Knorr <kraxel@cs.tu-berlin.de>
Radio card (ITT sound processor)
bigfoot <bigfoot@net-way.net>
@@ -18,7 +18,7 @@ Ragnar Hojland Espinosa <ragnar@macula.net>
+ many more (please mail me if you are missing in this list and would
- like to be mentioned)
+ like to be mentioned)
diff --git a/Documentation/video4linux/cx2341x/fw-calling.txt b/Documentation/video4linux/cx2341x/fw-calling.txt
new file mode 100644
index 000000000000..8d21181de537
--- /dev/null
+++ b/Documentation/video4linux/cx2341x/fw-calling.txt
@@ -0,0 +1,69 @@
+This page describes how to make calls to the firmware api.
+
+How to call
+===========
+
+The preferred calling convention is known as the firmware mailbox. The
+mailboxes are basically a fixed length array that serves as the call-stack.
+
+Firmware mailboxes can be located by searching the encoder and decoder memory
+for a 16 byte signature. That signature will be located on a 256-byte boundary.
+
+Signature:
+0x78, 0x56, 0x34, 0x12, 0x12, 0x78, 0x56, 0x34,
+0x34, 0x12, 0x78, 0x56, 0x56, 0x34, 0x12, 0x78
+
+The firmware implements 20 mailboxes of 20 32-bit words. The first 10 are
+reserved for API calls. The second 10 are used by the firmware for event
+notification.
+
+ Index Name
+ ----- ----
+ 0 Flags
+ 1 Command
+ 2 Return value
+ 3 Timeout
+ 4-19 Parameter/Result
+
+
+The flags are defined in the following table. The direction is from the
+perspective of the firmware.
+
+ Bit Direction Purpose
+ --- --------- -------
+ 2 O Firmware has processed the command.
+ 1 I Driver has finished setting the parameters.
+ 0 I Driver is using this mailbox.
+
+
+The command is a 32-bit enumerator. The API specifics may be found in the
+fw-*-api.txt documents.
+
+The return value is a 32-bit enumerator. Only two values are currently defined:
+0=success and -1=command undefined.
+
+There are 16 parameters/results 32-bit fields. The driver populates these fields
+with values for all the parameters required by the call. The driver overwrites
+these fields with result values returned by the call. The API specifics may be
+found in the fw-*-api.txt documents.
+
+The timeout value protects the card from a hung driver thread. If the driver
+doesn't handle the completed call within the timeout specified, the firmware
+will reset that mailbox.
+
+To make an API call, the driver iterates over each mailbox looking for the
+first one available (bit 0 has been cleared). The driver sets that bit, fills
+in the command enumerator, the timeout value and any required parameters. The
+driver then sets the parameter ready bit (bit 1). The firmware scans the
+mailboxes for pending commands, processes them, sets the result code, populates
+the result value array with that call's return values and sets the call
+complete bit (bit 2). Once bit 2 is set, the driver should retrieve the results
+and clear all the flags. If the driver does not perform this task within the
+time set in the timeout register, the firmware will reset that mailbox.
+
+Event notifications are sent from the firmware to the host. The host tells the
+firmware which events it is interested in via an API call. That call tells the
+firmware which notification mailbox to use. The firmware signals the host via
+an interrupt. Only the 16 Results fields are used, the Flags, Command, Return
+value and Timeout words are not used.
+
diff --git a/Documentation/video4linux/cx2341x/fw-decoder-api.txt b/Documentation/video4linux/cx2341x/fw-decoder-api.txt
new file mode 100644
index 000000000000..9df4fb3ea0f2
--- /dev/null
+++ b/Documentation/video4linux/cx2341x/fw-decoder-api.txt
@@ -0,0 +1,319 @@
+Decoder firmware API description
+================================
+
+Note: this API is part of the decoder firmware, so it's cx23415 only.
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_DEC_PING_FW
+Enum 0/0x00
+Description
+ This API call does nothing. It may be used to check if the firmware
+ is responding.
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_DEC_START_PLAYBACK
+Enum 1/0x01
+Description
+ Begin or resume playback.
+Param[0]
+ 0 based frame number in GOP to begin playback from.
+Param[1]
+ Specifies the number of muted audio frames to play before normal
+ audio resumes.
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_DEC_STOP_PLAYBACK
+Enum 2/0x02
+Description
+ Ends playback and clears all decoder buffers. If PTS is not zero,
+ playback stops at specified PTS.
+Param[0]
+ Display 0=last frame, 1=black
+Param[1]
+ PTS low
+Param[2]
+ PTS high
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_DEC_SET_PLAYBACK_SPEED
+Enum 3/0x03
+Description
+ Playback stream at speed other than normal. There are two modes of
+ operation:
+ Smooth: host transfers entire stream and firmware drops unused
+ frames.
+ Coarse: host drops frames based on indexing as required to achieve
+ desired speed.
+Param[0]
+ Bitmap:
+ 0:7 0 normal
+ 1 fast only "1.5 times"
+ n nX fast, 1/nX slow
+ 30 Framedrop:
+ '0' during 1.5 times play, every other B frame is dropped
+ '1' during 1.5 times play, stream is unchanged (bitrate
+ must not exceed 8mbps)
+ 31 Speed:
+ '0' slow
+ '1' fast
+Param[1]
+ Direction: 0=forward, 1=reverse
+Param[2]
+ Picture mask:
+ 1=I frames
+ 3=I, P frames
+ 7=I, P, B frames
+Param[3]
+ B frames per GOP (for reverse play only)
+Param[4]
+ Mute audio: 0=disable, 1=enable
+Param[5]
+ Display 0=frame, 1=field
+Param[6]
+ Specifies the number of muted audio frames to play before normal audio
+ resumes.
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_DEC_STEP_VIDEO
+Enum 5/0x05
+Description
+ Each call to this API steps the playback to the next unit defined below
+ in the current playback direction.
+Param[0]
+ 0=frame, 1=top field, 2=bottom field
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_DEC_SET_DMA_BLOCK_SIZE
+Enum 8/0x08
+Description
+ Set DMA transfer block size. Counterpart to API 0xC9
+Param[0]
+ DMA transfer block size in bytes. A different size may be specified
+ when issuing the DMA transfer command.
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_DEC_GET_XFER_INFO
+Enum 9/0x09
+Description
+ This API call may be used to detect an end of stream condtion.
+Result[0]
+ Stream type
+Result[1]
+ Address offset
+Result[2]
+ Maximum bytes to transfer
+Result[3]
+ Buffer fullness
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_DEC_GET_DMA_STATUS
+Enum 10/0x0A
+Description
+ Status of the last DMA transfer
+Result[0]
+ Bit 1 set means transfer complete
+ Bit 2 set means DMA error
+ Bit 3 set means linked list error
+Result[1]
+ DMA type: 0=MPEG, 1=OSD, 2=YUV
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_DEC_SCHED_DMA_FROM_HOST
+Enum 11/0x0B
+Description
+ Setup DMA from host operation. Counterpart to API 0xCC
+Param[0]
+ Memory address of link list
+Param[1]
+ Total # of bytes to transfer
+Param[2]
+ DMA type (0=MPEG, 1=OSD, 2=YUV)
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_DEC_PAUSE_PLAYBACK
+Enum 13/0x0D
+Description
+ Freeze playback immediately. In this mode, when internal buffers are
+ full, no more data will be accepted and data request IRQs will be
+ masked.
+Param[0]
+ Display: 0=last frame, 1=black
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_DEC_HALT_FW
+Enum 14/0x0E
+Description
+ The firmware is halted and no further API calls are serviced until
+ the firmware is uploaded again.
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_DEC_SET_STANDARD
+Enum 16/0x10
+Description
+ Selects display standard
+Param[0]
+ 0=NTSC, 1=PAL
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_DEC_GET_VERSION
+Enum 17/0x11
+Description
+ Returns decoder firmware version information
+Result[0]
+ Version bitmask:
+ Bits 0:15 build
+ Bits 16:23 minor
+ Bits 24:31 major
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_DEC_SET_STREAM_INPUT
+Enum 20/0x14
+Description
+ Select decoder stream input port
+Param[0]
+ 0=memory (default), 1=streaming
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_DEC_GET_TIMING_INFO
+Enum 21/0x15
+Description
+ Returns timing information from start of playback
+Result[0]
+ Frame count by decode order
+Result[1]
+ Video PTS bits 0:31 by display order
+Result[2]
+ Video PTS bit 32 by display order
+Result[3]
+ SCR bits 0:31 by display order
+Result[4]
+ SCR bit 32 by display order
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_DEC_SET_AUDIO_MODE
+Enum 22/0x16
+Description
+ Select audio mode
+Param[0]
+ Dual mono mode action
+Param[1]
+ Stereo mode action:
+ 0=Stereo, 1=Left, 2=Right, 3=Mono, 4=Swap, -1=Unchanged
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_DEC_SET_EVENT_NOTIFICATION
+Enum 23/0x17
+Description
+ Setup firmware to notify the host about a particular event.
+ Counterpart to API 0xD5
+Param[0]
+ Event: 0=Audio mode change between stereo and dual channel
+Param[1]
+ Notification 0=disabled, 1=enabled
+Param[2]
+ Interrupt bit
+Param[3]
+ Mailbox slot, -1 if no mailbox required.
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_DEC_SET_DISPLAY_BUFFERS
+Enum 24/0x18
+Description
+ Number of display buffers. To decode all frames in reverse playback you
+ must use nine buffers.
+Param[0]
+ 0=six buffers, 1=nine buffers
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_DEC_EXTRACT_VBI
+Enum 25/0x19
+Description
+ Extracts VBI data
+Param[0]
+ 0=extract from extension & user data, 1=extract from private packets
+Result[0]
+ VBI table location
+Result[1]
+ VBI table size
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_DEC_SET_DECODER_SOURCE
+Enum 26/0x1A
+Description
+ Selects decoder source. Ensure that the parameters passed to this
+ API match the encoder settings.
+Param[0]
+ Mode: 0=MPEG from host, 1=YUV from encoder, 2=YUV from host
+Param[1]
+ YUV picture width
+Param[2]
+ YUV picture height
+Param[3]
+ Bitmap: see Param[0] of API 0xBD
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_DEC_SET_AUDIO_OUTPUT
+Enum 27/0x1B
+Description
+ Select audio output format
+Param[0]
+ Bitmask:
+ 0:1 Data size:
+ '00' 16 bit
+ '01' 20 bit
+ '10' 24 bit
+ 2:7 Unused
+ 8:9 Mode:
+ '00' 2 channels
+ '01' 4 channels
+ '10' 6 channels
+ '11' 6 channels with one line data mode
+ (for left justified MSB first mode, 20 bit only)
+ 10:11 Unused
+ 12:13 Channel format:
+ '00' right justified MSB first mode
+ '01' left justified MSB first mode
+ '10' I2S mode
+ 14:15 Unused
+ 16:21 Right justify bit count
+ 22:31 Unused
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_DEC_SET_AV_DELAY
+Enum 28/0x1C
+Description
+ Set audio/video delay in 90Khz ticks
+Param[0]
+ 0=A/V in sync, negative=audio lags, positive=video lags
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_DEC_SET_PREBUFFERING
+Enum 30/0x1E
+Description
+ Decoder prebuffering, when enabled up to 128KB are buffered for
+ streams <8mpbs or 640KB for streams >8mbps
+Param[0]
+ 0=off, 1=on
diff --git a/Documentation/video4linux/cx2341x/fw-dma.txt b/Documentation/video4linux/cx2341x/fw-dma.txt
new file mode 100644
index 000000000000..8123e262d5b6
--- /dev/null
+++ b/Documentation/video4linux/cx2341x/fw-dma.txt
@@ -0,0 +1,94 @@
+This page describes the structures and procedures used by the cx2341x DMA
+engine.
+
+Introduction
+============
+
+The cx2341x PCI interface is busmaster capable. This means it has a DMA
+engine to efficiently transfer large volumes of data between the card and main
+memory without requiring help from a CPU. Like most hardware, it must operate
+on contiguous physical memory. This is difficult to come by in large quantities
+on virtual memory machines.
+
+Therefore, it also supports a technique called "scatter-gather". The card can
+transfer multiple buffers in one operation. Instead of allocating one large
+contiguous buffer, the driver can allocate several smaller buffers.
+
+In practice, I've seen the average transfer to be roughly 80K, but transfers
+above 128K were not uncommon, particularly at startup. The 128K figure is
+important, because that is the largest block that the kernel can normally
+allocate. Even still, 128K blocks are hard to come by, so the driver writer is
+urged to choose a smaller block size and learn the scatter-gather technique.
+
+Mailbox #10 is reserved for DMA transfer information.
+
+Flow
+====
+
+This section describes, in general, the order of events when handling DMA
+transfers. Detailed information follows this section.
+
+- The card raises the Encoder interrupt.
+- The driver reads the transfer type, offset and size from Mailbox #10.
+- The driver constructs the scatter-gather array from enough free dma buffers
+ to cover the size.
+- The driver schedules the DMA transfer via the ScheduleDMAtoHost API call.
+- The card raises the DMA Complete interrupt.
+- The driver checks the DMA status register for any errors.
+- The driver post-processes the newly transferred buffers.
+
+NOTE! It is possible that the Encoder and DMA Complete interrupts get raised
+simultaneously. (End of the last, start of the next, etc.)
+
+Mailbox #10
+===========
+
+The Flags, Command, Return Value and Timeout fields are ignored.
+
+Name: Mailbox #10
+Results[0]: Type: 0: MPEG.
+Results[1]: Offset: The position relative to the card's memory space.
+Results[2]: Size: The exact number of bytes to transfer.
+
+My speculation is that since the StartCapture API has a capture type of "RAW"
+available, that the type field will have other values that correspond to YUV
+and PCM data.
+
+Scatter-Gather Array
+====================
+
+The scatter-gather array is a contiguously allocated block of memory that
+tells the card the source and destination of each data-block to transfer.
+Card "addresses" are derived from the offset supplied by Mailbox #10. Host
+addresses are the physical memory location of the target DMA buffer.
+
+Each S-G array element is a struct of three 32-bit words. The first word is
+the source address, the second is the destination address. Both take up the
+entire 32 bits. The lowest 16 bits of the third word is the transfer byte
+count. The high-bit of the third word is the "last" flag. The last-flag tells
+the card to raise the DMA_DONE interrupt. From hard personal experience, if
+you forget to set this bit, the card will still "work" but the stream will
+most likely get corrupted.
+
+The transfer count must be a multiple of 256. Therefore, the driver will need
+to track how much data in the target buffer is valid and deal with it
+accordingly.
+
+Array Element:
+
+- 32-bit Source Address
+- 32-bit Destination Address
+- 16-bit reserved (high bit is the last flag)
+- 16-bit byte count
+
+DMA Transfer Status
+===================
+
+Register 0x0004 holds the DMA Transfer Status:
+
+Bit
+4 Scatter-Gather array error
+3 DMA write error
+2 DMA read error
+1 write completed
+0 read completed
diff --git a/Documentation/video4linux/cx2341x/fw-encoder-api.txt b/Documentation/video4linux/cx2341x/fw-encoder-api.txt
new file mode 100644
index 000000000000..001c68644b08
--- /dev/null
+++ b/Documentation/video4linux/cx2341x/fw-encoder-api.txt
@@ -0,0 +1,694 @@
+Encoder firmware API description
+================================
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_PING_FW
+Enum 128/0x80
+Description
+ Does nothing. Can be used to check if the firmware is responding.
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_START_CAPTURE
+Enum 129/0x81
+Description
+ Commences the capture of video, audio and/or VBI data. All encoding
+ parameters must be initialized prior to this API call. Captures frames
+ continuously or until a predefined number of frames have been captured.
+Param[0]
+ Capture stream type:
+ 0=MPEG
+ 1=Raw
+ 2=Raw passthrough
+ 3=VBI
+
+Param[1]
+ Bitmask:
+ Bit 0 when set, captures YUV
+ Bit 1 when set, captures PCM audio
+ Bit 2 when set, captures VBI (same as param[0]=3)
+ Bit 3 when set, the capture destination is the decoder
+ (same as param[0]=2)
+ Bit 4 when set, the capture destination is the host
+ Note: this parameter is only meaningful for RAW capture type.
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_STOP_CAPTURE
+Enum 130/0x82
+Description
+ Ends a capture in progress
+Param[0]
+ 0=stop at end of GOP (generates IRQ)
+ 1=stop immediate (no IRQ)
+Param[1]
+ Stream type to stop, see param[0] of API 0x81
+Param[2]
+ Subtype, see param[1] of API 0x81
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_AUDIO_ID
+Enum 137/0x89
+Description
+ Assigns the transport stream ID of the encoded audio stream
+Param[0]
+ Audio Stream ID
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_VIDEO_ID
+Enum 139/0x8B
+Description
+ Set video transport stream ID
+Param[0]
+ Video stream ID
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_PCR_ID
+Enum 141/0x8D
+Description
+ Assigns the transport stream ID for PCR packets
+Param[0]
+ PCR Stream ID
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_FRAME_RATE
+Enum 143/0x8F
+Description
+ Set video frames per second. Change occurs at start of new GOP.
+Param[0]
+ 0=30fps
+ 1=25fps
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_FRAME_SIZE
+Enum 145/0x91
+Description
+ Select video stream encoding resolution.
+Param[0]
+ Height in lines. Default 480
+Param[1]
+ Width in pixels. Default 720
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_BIT_RATE
+Enum 149/0x95
+Description
+ Assign average video stream bitrate. Note on the last three params:
+ Param[3] and [4] seem to be always 0, param [5] doesn't seem to be used.
+Param[0]
+ 0=variable bitrate, 1=constant bitrate
+Param[1]
+ bitrate in bits per second
+Param[2]
+ peak bitrate in bits per second, divided by 400
+Param[3]
+ Mux bitrate in bits per second, divided by 400. May be 0 (default).
+Param[4]
+ Rate Control VBR Padding
+Param[5]
+ VBV Buffer used by encoder
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_GOP_PROPERTIES
+Enum 151/0x97
+Description
+ Setup the GOP structure
+Param[0]
+ GOP size (maximum is 34)
+Param[1]
+ Number of B frames between the I and P frame, plus 1.
+ For example: IBBPBBPBBPBB --> GOP size: 12, number of B frames: 2+1 = 3
+ Note that GOP size must be a multiple of (B-frames + 1).
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_ASPECT_RATIO
+Enum 153/0x99
+Description
+ Sets the encoding aspect ratio. Changes in the aspect ratio take effect
+ at the start of the next GOP.
+Param[0]
+ '0000' forbidden
+ '0001' 1:1 square
+ '0010' 4:3
+ '0011' 16:9
+ '0100' 2.21:1
+ '0101' reserved
+ ....
+ '1111' reserved
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_DNR_FILTER_MODE
+Enum 155/0x9B
+Description
+ Assign Dynamic Noise Reduction operating mode
+Param[0]
+ Bit0: Spatial filter, set=auto, clear=manual
+ Bit1: Temporal filter, set=auto, clear=manual
+Param[1]
+ Median filter:
+ 0=Disabled
+ 1=Horizontal
+ 2=Vertical
+ 3=Horiz/Vert
+ 4=Diagonal
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_DNR_FILTER_PROPS
+Enum 157/0x9D
+Description
+ These Dynamic Noise Reduction filter values are only meaningful when
+ the respective filter is set to "manual" (See API 0x9B)
+Param[0]
+ Spatial filter: default 0, range 0:15
+Param[1]
+ Temporal filter: default 0, range 0:31
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_CORING_LEVELS
+Enum 159/0x9F
+Description
+ Assign Dynamic Noise Reduction median filter properties.
+Param[0]
+ Threshold above which the luminance median filter is enabled.
+ Default: 0, range 0:255
+Param[1]
+ Threshold below which the luminance median filter is enabled.
+ Default: 255, range 0:255
+Param[2]
+ Threshold above which the chrominance median filter is enabled.
+ Default: 0, range 0:255
+Param[3]
+ Threshold below which the chrominance median filter is enabled.
+ Default: 255, range 0:255
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_SPATIAL_FILTER_TYPE
+Enum 161/0xA1
+Description
+ Assign spatial prefilter parameters
+Param[0]
+ Luminance filter
+ 0=Off
+ 1=1D Horizontal
+ 2=1D Vertical
+ 3=2D H/V Separable (default)
+ 4=2D Symmetric non-separable
+Param[1]
+ Chrominance filter
+ 0=Off
+ 1=1D Horizontal (default)
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_3_2_PULLDOWN
+Enum 177/0xB1
+Description
+ 3:2 pulldown properties
+Param[0]
+ 0=enabled
+ 1=disabled
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_VBI_LINE
+Enum 183/0xB7
+Description
+ Selects VBI line number.
+Param[0]
+ Bits 0:4 line number
+ Bit 31 0=top_field, 1=bottom_field
+ Bits 0:31 all set specifies "all lines"
+Param[1]
+ VBI line information features: 0=disabled, 1=enabled
+Param[2]
+ Slicing: 0=None, 1=Closed Caption
+ Almost certainly not implemented. Set to 0.
+Param[3]
+ Luminance samples in this line.
+ Almost certainly not implemented. Set to 0.
+Param[4]
+ Chrominance samples in this line
+ Almost certainly not implemented. Set to 0.
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_STREAM_TYPE
+Enum 185/0xB9
+Description
+ Assign stream type
+ Note: Transport stream is not working in recent firmwares.
+ And in older firmwares the timestamps in the TS seem to be
+ unreliable.
+Param[0]
+ 0=Program stream
+ 1=Transport stream
+ 2=MPEG1 stream
+ 3=PES A/V stream
+ 5=PES Video stream
+ 7=PES Audio stream
+ 10=DVD stream
+ 11=VCD stream
+ 12=SVCD stream
+ 13=DVD_S1 stream
+ 14=DVD_S2 stream
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_OUTPUT_PORT
+Enum 187/0xBB
+Description
+ Assign stream output port. Normally 0 when the data is copied through
+ the PCI bus (DMA), and 1 when the data is streamed to another chip
+ (pvrusb and cx88-blackbird).
+Param[0]
+ 0=Memory (default)
+ 1=Streaming
+ 2=Serial
+Param[1]
+ Unknown, but leaving this to 0 seems to work best. Indications are that
+ this might have to do with USB support, although passing anything but 0
+ onl breaks things.
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_AUDIO_PROPERTIES
+Enum 189/0xBD
+Description
+ Set audio stream properties, may be called while encoding is in progress.
+ Note: all bitfields are consistent with ISO11172 documentation except
+ bits 2:3 which ISO docs define as:
+ '11' Layer I
+ '10' Layer II
+ '01' Layer III
+ '00' Undefined
+ This discrepancy may indicate a possible error in the documentation.
+ Testing indicated that only Layer II is actually working, and that
+ the minimum bitrate should be 192 kbps.
+Param[0]
+ Bitmask:
+ 0:1 '00' 44.1Khz
+ '01' 48Khz
+ '10' 32Khz
+ '11' reserved
+
+ 2:3 '01'=Layer I
+ '10'=Layer II
+
+ 4:7 Bitrate:
+ Index | Layer I | Layer II
+ ------+-------------+------------
+ '0000' | free format | free format
+ '0001' | 32 kbit/s | 32 kbit/s
+ '0010' | 64 kbit/s | 48 kbit/s
+ '0011' | 96 kbit/s | 56 kbit/s
+ '0100' | 128 kbit/s | 64 kbit/s
+ '0101' | 160 kbit/s | 80 kbit/s
+ '0110' | 192 kbit/s | 96 kbit/s
+ '0111' | 224 kbit/s | 112 kbit/s
+ '1000' | 256 kbit/s | 128 kbit/s
+ '1001' | 288 kbit/s | 160 kbit/s
+ '1010' | 320 kbit/s | 192 kbit/s
+ '1011' | 352 kbit/s | 224 kbit/s
+ '1100' | 384 kbit/s | 256 kbit/s
+ '1101' | 416 kbit/s | 320 kbit/s
+ '1110' | 448 kbit/s | 384 kbit/s
+ Note: For Layer II, not all combinations of total bitrate
+ and mode are allowed. See ISO11172-3 3-Annex B, Table 3-B.2
+
+ 8:9 '00'=Stereo
+ '01'=JointStereo
+ '10'=Dual
+ '11'=Mono
+ Note: testing seems to indicate that Mono and possibly
+ JointStereo are not working (default to stereo).
+ Dual does work, though.
+
+ 10:11 Mode Extension used in joint_stereo mode.
+ In Layer I and II they indicate which subbands are in
+ intensity_stereo. All other subbands are coded in stereo.
+ '00' subbands 4-31 in intensity_stereo, bound==4
+ '01' subbands 8-31 in intensity_stereo, bound==8
+ '10' subbands 12-31 in intensity_stereo, bound==12
+ '11' subbands 16-31 in intensity_stereo, bound==16
+
+ 12:13 Emphasis:
+ '00' None
+ '01' 50/15uS
+ '10' reserved
+ '11' CCITT J.17
+
+ 14 CRC:
+ '0' off
+ '1' on
+
+ 15 Copyright:
+ '0' off
+ '1' on
+
+ 16 Generation:
+ '0' copy
+ '1' original
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_HALT_FW
+Enum 195/0xC3
+Description
+ The firmware is halted and no further API calls are serviced until the
+ firmware is uploaded again.
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_GET_VERSION
+Enum 196/0xC4
+Description
+ Returns the version of the encoder firmware.
+Result[0]
+ Version bitmask:
+ Bits 0:15 build
+ Bits 16:23 minor
+ Bits 24:31 major
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_GOP_CLOSURE
+Enum 197/0xC5
+Description
+ Assigns the GOP open/close property.
+Param[0]
+ 0=Open
+ 1=Closed
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_GET_SEQ_END
+Enum 198/0xC6
+Description
+ Obtains the sequence end code of the encoder's buffer. When a capture
+ is started a number of interrupts are still generated, the last of
+ which will have Result[0] set to 1 and Result[1] will contain the size
+ of the buffer.
+Result[0]
+ State of the transfer (1 if last buffer)
+Result[1]
+ If Result[0] is 1, this contains the size of the last buffer, undefined
+ otherwise.
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_PGM_INDEX_INFO
+Enum 199/0xC7
+Description
+ Sets the Program Index Information.
+Param[0]
+ Picture Mask:
+ 0=No index capture
+ 1=I frames
+ 3=I,P frames
+ 7=I,P,B frames
+Param[1]
+ Elements requested (up to 400)
+Result[0]
+ Offset in SDF memory of the table.
+Result[1]
+ Number of allocated elements up to a maximum of Param[1]
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_VBI_CONFIG
+Enum 200/0xC8
+Description
+ Configure VBI settings
+Param[0]
+ Bitmap:
+ 0 Mode '0' Sliced, '1' Raw
+ 1:3 Insertion:
+ '000' insert in extension & user data
+ '001' insert in private packets
+ '010' separate stream and user data
+ '111' separate stream and private data
+ 8:15 Stream ID (normally 0xBD)
+Param[1]
+ Frames per interrupt (max 8). Only valid in raw mode.
+Param[2]
+ Total raw VBI frames. Only valid in raw mode.
+Param[3]
+ Start codes
+Param[4]
+ Stop codes
+Param[5]
+ Lines per frame
+Param[6]
+ Byte per line
+Result[0]
+ Observed frames per interrupt in raw mode only. Rage 1 to Param[1]
+Result[1]
+ Observed number of frames in raw mode. Range 1 to Param[2]
+Result[2]
+ Memory offset to start or raw VBI data
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_DMA_BLOCK_SIZE
+Enum 201/0xC9
+Description
+ Set DMA transfer block size
+Param[0]
+ DMA transfer block size in bytes or frames. When unit is bytes,
+ supported block sizes are 2^7, 2^8 and 2^9 bytes.
+Param[1]
+ Unit: 0=bytes, 1=frames
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_GET_PREV_DMA_INFO_MB_10
+Enum 202/0xCA
+Description
+ Returns information on the previous DMA transfer in conjunction with
+ bit 27 of the interrupt mask. Uses mailbox 10.
+Result[0]
+ Type of stream
+Result[1]
+ Address Offset
+Result[2]
+ Maximum size of transfer
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_GET_PREV_DMA_INFO_MB_9
+Enum 203/0xCB
+Description
+ Returns information on the previous DMA transfer in conjunction with
+ bit 27 of the interrupt mask. Uses mailbox 9.
+Result[0]
+ Status bits:
+ Bit 0 set indicates transfer complete
+ Bit 2 set indicates transfer error
+ Bit 4 set indicates linked list error
+Result[1]
+ DMA type
+Result[2]
+ Presentation Time Stamp bits 0..31
+Result[3]
+ Presentation Time Stamp bit 32
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SCHED_DMA_TO_HOST
+Enum 204/0xCC
+Description
+ Setup DMA to host operation
+Param[0]
+ Memory address of link list
+Param[1]
+ Length of link list (wtf: what units ???)
+Param[2]
+ DMA type (0=MPEG)
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_INITIALIZE_INPUT
+Enum 205/0xCD
+Description
+ Initializes the video input
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_FRAME_DROP_RATE
+Enum 208/0xD0
+Description
+ For each frame captured, skip specified number of frames.
+Param[0]
+ Number of frames to skip
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_PAUSE_ENCODER
+Enum 210/0xD2
+Description
+ During a pause condition, all frames are dropped instead of being encoded.
+Param[0]
+ 0=Pause encoding
+ 1=Continue encoding
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_REFRESH_INPUT
+Enum 211/0xD3
+Description
+ Refreshes the video input
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_COPYRIGHT
+Enum 212/0xD4
+Description
+ Sets stream copyright property
+Param[0]
+ 0=Stream is not copyrighted
+ 1=Stream is copyrighted
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_EVENT_NOTIFICATION
+Enum 213/0xD5
+Description
+ Setup firmware to notify the host about a particular event. Host must
+ unmask the interrupt bit.
+Param[0]
+ Event (0=refresh encoder input)
+Param[1]
+ Notification 0=disabled 1=enabled
+Param[2]
+ Interrupt bit
+Param[3]
+ Mailbox slot, -1 if no mailbox required.
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_NUM_VSYNC_LINES
+Enum 214/0xD6
+Description
+ Depending on the analog video decoder used, this assigns the number
+ of lines for field 1 and 2.
+Param[0]
+ Field 1 number of lines:
+ 0x00EF for SAA7114
+ 0x00F0 for SAA7115
+ 0x0105 for Micronas
+Param[1]
+ Field 2 number of lines:
+ 0x00EF for SAA7114
+ 0x00F0 for SAA7115
+ 0x0106 for Micronas
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_SET_PLACEHOLDER
+Enum 215/0xD7
+Description
+ Provides a mechanism of inserting custom user data in the MPEG stream.
+Param[0]
+ 0=extension & user data
+ 1=private packet with stream ID 0xBD
+Param[1]
+ Rate at which to insert data, in units of frames (for private packet)
+ or GOPs (for ext. & user data)
+Param[2]
+ Number of data DWORDs (below) to insert
+Param[3]
+ Custom data 0
+Param[4]
+ Custom data 1
+Param[5]
+ Custom data 2
+Param[6]
+ Custom data 3
+Param[7]
+ Custom data 4
+Param[8]
+ Custom data 5
+Param[9]
+ Custom data 6
+Param[10]
+ Custom data 7
+Param[11]
+ Custom data 8
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_MUTE_VIDEO
+Enum 217/0xD9
+Description
+ Video muting
+Param[0]
+ Bit usage:
+ 0 '0'=video not muted
+ '1'=video muted, creates frames with the YUV color defined below
+ 1:7 Unused
+ 8:15 V chrominance information
+ 16:23 U chrominance information
+ 24:31 Y luminance information
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_MUTE_AUDIO
+Enum 218/0xDA
+Description
+ Audio muting
+Param[0]
+ 0=audio not muted
+ 1=audio muted (produces silent mpeg audio stream)
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_UNKNOWN
+Enum 219/0xDB
+Description
+ Unknown API, it's used by Hauppauge though.
+Param[0]
+ 0 This is the value Hauppauge uses, Unknown what it means.
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_ENC_MISC
+Enum 220/0xDC
+Description
+ Miscellaneous actions. Not known for 100% what it does. It's really a
+ sort of ioctl call. The first parameter is a command number, the second
+ the value.
+Param[0]
+ Command number:
+ 1=set initial SCR value when starting encoding.
+ 2=set quality mode (apparently some test setting).
+ 3=setup advanced VIM protection handling (supposedly only for the cx23416
+ for raw YUV).
+ Actually it looks like this should be 0 for saa7114/5 based card and 1
+ for cx25840 based cards.
+ 4=generate artificial PTS timestamps
+ 5=USB flush mode
+ 6=something to do with the quantization matrix
+ 7=set navigation pack insertion for DVD
+ 8=enable scene change detection (seems to be a failure)
+ 9=set history parameters of the video input module
+ 10=set input field order of VIM
+ 11=set quantization matrix
+ 12=reset audio interface
+ 13=set audio volume delay
+ 14=set audio delay
+
+Param[1]
+ Command value.
diff --git a/Documentation/video4linux/cx2341x/fw-memory.txt b/Documentation/video4linux/cx2341x/fw-memory.txt
new file mode 100644
index 000000000000..ef0aad3f88fc
--- /dev/null
+++ b/Documentation/video4linux/cx2341x/fw-memory.txt
@@ -0,0 +1,141 @@
+This document describes the cx2341x memory map and documents some of the register
+space.
+
+Warning! This information was figured out from searching through the memory and
+registers, this information may not be correct and is certainly not complete, and
+was not derived from anything more than searching through the memory space with
+commands like:
+
+ ivtvctl -O min=0x02000000,max=0x020000ff
+
+So take this as is, I'm always searching for more stuff, it's a large
+register space :-).
+
+Memory Map
+==========
+
+The cx2341x exposes its entire 64M memory space to the PCI host via the PCI BAR0
+(Base Address Register 0). The addresses here are offsets relative to the
+address held in BAR0.
+
+0x00000000-0x00ffffff Encoder memory space
+0x00000000-0x0003ffff Encode.rom
+ ???-??? MPEG buffer(s)
+ ???-??? Raw video capture buffer(s)
+ ???-??? Raw audio capture buffer(s)
+ ???-??? Display buffers (6 or 9)
+
+0x01000000-0x01ffffff Decoder memory space
+0x01000000-0x0103ffff Decode.rom
+ ???-??? MPEG buffers(s)
+0x0114b000-0x0115afff Audio.rom (deprecated?)
+
+0x02000000-0x0200ffff Register Space
+
+Registers
+=========
+
+The registers occupy the 64k space starting at the 0x02000000 offset from BAR0.
+All of these registers are 32 bits wide.
+
+DMA Registers 0x000-0xff:
+
+ 0x00 - Control:
+ 0=reset/cancel, 1=read, 2=write, 4=stop
+ 0x04 - DMA status:
+ 1=read busy, 2=write busy, 4=read error, 8=write error, 16=link list error
+ 0x08 - pci DMA pointer for read link list
+ 0x0c - pci DMA pointer for write link list
+ 0x10 - read/write DMA enable:
+ 1=read enable, 2=write enable
+ 0x14 - always 0xffffffff, if set any lower instability occurs, 0x00 crashes
+ 0x18 - ??
+ 0x1c - always 0x20 or 32, smaller values slow down DMA transactions
+ 0x20 - always value of 0x780a010a
+ 0x24-0x3c - usually just random values???
+ 0x40 - Interrupt status
+ 0x44 - Write a bit here and shows up in Interrupt status 0x40
+ 0x48 - Interrupt Mask
+ 0x4C - always value of 0xfffdffff,
+ if changed to 0xffffffff DMA write interrupts break.
+ 0x50 - always 0xffffffff
+ 0x54 - always 0xffffffff (0x4c, 0x50, 0x54 seem like interrupt masks, are
+ 3 processors on chip, Java ones, VPU, SPU, APU, maybe these are the
+ interrupt masks???).
+ 0x60-0x7C - random values
+ 0x80 - first write linked list reg, for Encoder Memory addr
+ 0x84 - first write linked list reg, for pci memory addr
+ 0x88 - first write linked list reg, for length of buffer in memory addr
+ (|0x80000000 or this for last link)
+ 0x8c-0xcc - rest of write linked list reg, 8 sets of 3 total, DMA goes here
+ from linked list addr in reg 0x0c, firmware must push through or
+ something.
+ 0xe0 - first (and only) read linked list reg, for pci memory addr
+ 0xe4 - first (and only) read linked list reg, for Decoder memory addr
+ 0xe8 - first (and only) read linked list reg, for length of buffer
+ 0xec-0xff - Nothing seems to be in these registers, 0xec-f4 are 0x00000000.
+
+Memory locations for Encoder Buffers 0x700-0x7ff:
+
+These registers show offsets of memory locations pertaining to each
+buffer area used for encoding, have to shift them by <<1 first.
+
+0x07F8: Encoder SDRAM refresh
+0x07FC: Encoder SDRAM pre-charge
+
+Memory locations for Decoder Buffers 0x800-0x8ff:
+
+These registers show offsets of memory locations pertaining to each
+buffer area used for decoding, have to shift them by <<1 first.
+
+0x08F8: Decoder SDRAM refresh
+0x08FC: Decoder SDRAM pre-charge
+
+Other memory locations:
+
+0x2800: Video Display Module control
+0x2D00: AO (audio output?) control
+0x2D24: Bytes Flushed
+0x7000: LSB I2C write clock bit (inverted)
+0x7004: LSB I2C write data bit (inverted)
+0x7008: LSB I2C read clock bit
+0x700c: LSB I2C read data bit
+0x9008: GPIO get input state
+0x900c: GPIO set output state
+0x9020: GPIO direction (Bit7 (GPIO 0..7) - 0:input, 1:output)
+0x9050: SPU control
+0x9054: Reset HW blocks
+0x9058: VPU control
+0xA018: Bit6: interrupt pending?
+0xA064: APU command
+
+
+Interrupt Status Register
+=========================
+
+The definition of the bits in the interrupt status register 0x0040, and the
+interrupt mask 0x0048. If a bit is cleared in the mask, then we want our ISR to
+execute.
+
+Bit
+31 Encoder Start Capture
+30 Encoder EOS
+29 Encoder VBI capture
+28 Encoder Video Input Module reset event
+27 Encoder DMA complete
+26
+25 Decoder copy protect detection event
+24 Decoder audio mode change detection event
+23
+22 Decoder data request
+21 Decoder I-Frame? done
+20 Decoder DMA complete
+19 Decoder VBI re-insertion
+18 Decoder DMA err (linked-list bad)
+
+Missing
+Encoder API call completed
+Decoder API call completed
+Encoder API post(?)
+Decoder API post(?)
+Decoder VTRACE event
diff --git a/Documentation/video4linux/cx2341x/fw-osd-api.txt b/Documentation/video4linux/cx2341x/fw-osd-api.txt
new file mode 100644
index 000000000000..da98ae30a37a
--- /dev/null
+++ b/Documentation/video4linux/cx2341x/fw-osd-api.txt
@@ -0,0 +1,342 @@
+OSD firmware API description
+============================
+
+Note: this API is part of the decoder firmware, so it's cx23415 only.
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_OSD_GET_FRAMEBUFFER
+Enum 65/0x41
+Description
+ Return base and length of contiguous OSD memory.
+Result[0]
+ OSD base address
+Result[1]
+ OSD length
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_OSD_GET_PIXEL_FORMAT
+Enum 66/0x42
+Description
+ Query OSD format
+Result[0]
+ 0=8bit index, 4=AlphaRGB 8:8:8:8
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_OSD_SET_PIXEL_FORMAT
+Enum 67/0x43
+Description
+ Assign pixel format
+Param[0]
+ 0=8bit index, 4=AlphaRGB 8:8:8:8
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_OSD_GET_STATE
+Enum 68/0x44
+Description
+ Query OSD state
+Result[0]
+ Bit 0 0=off, 1=on
+ Bits 1:2 alpha control
+ Bits 3:5 pixel format
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_OSD_SET_STATE
+Enum 69/0x45
+Description
+ OSD switch
+Param[0]
+ 0=off, 1=on
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_OSD_GET_OSD_COORDS
+Enum 70/0x46
+Description
+ Retrieve coordinates of OSD area blended with video
+Result[0]
+ OSD buffer address
+Result[1]
+ Stride in pixels
+Result[2]
+ Lines in OSD buffer
+Result[3]
+ Horizontal offset in buffer
+Result[4]
+ Vertical offset in buffer
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_OSD_SET_OSD_COORDS
+Enum 71/0x47
+Description
+ Assign the coordinates of the OSD area to blend with video
+Param[0]
+ buffer address
+Param[1]
+ buffer stride in pixels
+Param[2]
+ lines in buffer
+Param[3]
+ horizontal offset
+Param[4]
+ vertical offset
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_OSD_GET_SCREEN_COORDS
+Enum 72/0x48
+Description
+ Retrieve OSD screen area coordinates
+Result[0]
+ top left horizontal offset
+Result[1]
+ top left vertical offset
+Result[2]
+ bottom right hotizontal offset
+Result[3]
+ bottom right vertical offset
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_OSD_SET_SCREEN_COORDS
+Enum 73/0x49
+Description
+ Assign the coordinates of the screen area to blend with video
+Param[0]
+ top left horizontal offset
+Param[1]
+ top left vertical offset
+Param[2]
+ bottom left horizontal offset
+Param[3]
+ bottom left vertical offset
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_OSD_GET_GLOBAL_ALPHA
+Enum 74/0x4A
+Description
+ Retrieve OSD global alpha
+Result[0]
+ global alpha: 0=off, 1=on
+Result[1]
+ bits 0:7 global alpha
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_OSD_SET_GLOBAL_ALPHA
+Enum 75/0x4B
+Description
+ Update global alpha
+Param[0]
+ global alpha: 0=off, 1=on
+Param[1]
+ global alpha (8 bits)
+Param[2]
+ local alpha: 0=on, 1=off
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_OSD_SET_BLEND_COORDS
+Enum 78/0x4C
+Description
+ Move start of blending area within display buffer
+Param[0]
+ horizontal offset in buffer
+Param[1]
+ vertical offset in buffer
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_OSD_GET_FLICKER_STATE
+Enum 79/0x4F
+Description
+ Retrieve flicker reduction module state
+Result[0]
+ flicker state: 0=off, 1=on
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_OSD_SET_FLICKER_STATE
+Enum 80/0x50
+Description
+ Set flicker reduction module state
+Param[0]
+ State: 0=off, 1=on
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_OSD_BLT_COPY
+Enum 82/0x52
+Description
+ BLT copy
+Param[0]
+'0000' zero
+'0001' ~destination AND ~source
+'0010' ~destination AND source
+'0011' ~destination
+'0100' destination AND ~source
+'0101' ~source
+'0110' destination XOR source
+'0111' ~destination OR ~source
+'1000' ~destination AND ~source
+'1001' destination XNOR source
+'1010' source
+'1011' ~destination OR source
+'1100' destination
+'1101' destination OR ~source
+'1110' destination OR source
+'1111' one
+
+Param[1]
+ Resulting alpha blending
+ '01' source_alpha
+ '10' destination_alpha
+ '11' source_alpha*destination_alpha+1
+ (zero if both source and destination alpha are zero)
+Param[2]
+ '00' output_pixel = source_pixel
+
+ '01' if source_alpha=0:
+ output_pixel = destination_pixel
+ if 256 > source_alpha > 1:
+ output_pixel = ((source_alpha + 1)*source_pixel +
+ (255 - source_alpha)*destination_pixel)/256
+
+ '10' if destination_alpha=0:
+ output_pixel = source_pixel
+ if 255 > destination_alpha > 0:
+ output_pixel = ((255 - destination_alpha)*source_pixel +
+ (destination_alpha + 1)*destination_pixel)/256
+
+ '11' if source_alpha=0:
+ source_temp = 0
+ if source_alpha=255:
+ source_temp = source_pixel*256
+ if 255 > source_alpha > 0:
+ source_temp = source_pixel*(source_alpha + 1)
+ if destination_alpha=0:
+ destination_temp = 0
+ if destination_alpha=255:
+ destination_temp = destination_pixel*256
+ if 255 > destination_alpha > 0:
+ destination_temp = destination_pixel*(destination_alpha + 1)
+ output_pixel = (source_temp + destination_temp)/256
+Param[3]
+ width
+Param[4]
+ height
+Param[5]
+ destination pixel mask
+Param[6]
+ destination rectangle start address
+Param[7]
+ destination stride in dwords
+Param[8]
+ source stride in dwords
+Param[9]
+ source rectangle start address
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_OSD_BLT_FILL
+Enum 83/0x53
+Description
+ BLT fill color
+Param[0]
+ Same as Param[0] on API 0x52
+Param[1]
+ Same as Param[1] on API 0x52
+Param[2]
+ Same as Param[2] on API 0x52
+Param[3]
+ width
+Param[4]
+ height
+Param[5]
+ destination pixel mask
+Param[6]
+ destination rectangle start address
+Param[7]
+ destination stride in dwords
+Param[8]
+ color fill value
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_OSD_BLT_TEXT
+Enum 84/0x54
+Description
+ BLT for 8 bit alpha text source
+Param[0]
+ Same as Param[0] on API 0x52
+Param[1]
+ Same as Param[1] on API 0x52
+Param[2]
+ Same as Param[2] on API 0x52
+Param[3]
+ width
+Param[4]
+ height
+Param[5]
+ destination pixel mask
+Param[6]
+ destination rectangle start address
+Param[7]
+ destination stride in dwords
+Param[8]
+ source stride in dwords
+Param[9]
+ source rectangle start address
+Param[10]
+ color fill value
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_OSD_SET_FRAMEBUFFER_WINDOW
+Enum 86/0x56
+Description
+ Positions the main output window on the screen. The coordinates must be
+ such that the entire window fits on the screen.
+Param[0]
+ window width
+Param[1]
+ window height
+Param[2]
+ top left window corner horizontal offset
+Param[3]
+ top left window corner vertical offset
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_OSD_SET_CHROMA_KEY
+Enum 96/0x60
+Description
+ Chroma key switch and color
+Param[0]
+ state: 0=off, 1=on
+Param[1]
+ color
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_OSD_GET_ALPHA_CONTENT_INDEX
+Enum 97/0x61
+Description
+ Retrieve alpha content index
+Result[0]
+ alpha content index, Range 0:15
+
+-------------------------------------------------------------------------------
+
+Name CX2341X_OSD_SET_ALPHA_CONTENT_INDEX
+Enum 98/0x62
+Description
+ Assign alpha content index
+Param[0]
+ alpha content index, range 0:15
diff --git a/Documentation/video4linux/cx2341x/fw-upload.txt b/Documentation/video4linux/cx2341x/fw-upload.txt
new file mode 100644
index 000000000000..60c502ce3215
--- /dev/null
+++ b/Documentation/video4linux/cx2341x/fw-upload.txt
@@ -0,0 +1,49 @@
+This document describes how to upload the cx2341x firmware to the card.
+
+How to find
+===========
+
+See the web pages of the various projects that uses this chip for information
+on how to obtain the firmware.
+
+The firmware stored in a Windows driver can be detected as follows:
+
+- Each firmware image is 256k bytes.
+- The 1st 32-bit word of the Encoder image is 0x0000da7
+- The 1st 32-bit word of the Decoder image is 0x00003a7
+- The 2nd 32-bit word of both images is 0xaa55bb66
+
+How to load
+===========
+
+- Issue the FWapi command to stop the encoder if it is running. Wait for the
+ command to complete.
+- Issue the FWapi command to stop the decoder if it is running. Wait for the
+ command to complete.
+- Issue the I2C command to the digitizer to stop emitting VSYNC events.
+- Issue the FWapi command to halt the encoder's firmware.
+- Sleep for 10ms.
+- Issue the FWapi command to halt the decoder's firmware.
+- Sleep for 10ms.
+- Write 0x00000000 to register 0x2800 to stop the Video Display Module.
+- Write 0x00000005 to register 0x2D00 to stop the AO (audio output?).
+- Write 0x00000000 to register 0xA064 to ping? the APU.
+- Write 0xFFFFFFFE to register 0x9058 to stop the VPU.
+- Write 0xFFFFFFFF to register 0x9054 to reset the HW blocks.
+- Write 0x00000001 to register 0x9050 to stop the SPU.
+- Sleep for 10ms.
+- Write 0x0000001A to register 0x07FC to init the Encoder SDRAM's pre-charge.
+- Write 0x80000640 to register 0x07F8 to init the Encoder SDRAM's refresh to 1us.
+- Write 0x0000001A to register 0x08FC to init the Decoder SDRAM's pre-charge.
+- Write 0x80000640 to register 0x08F8 to init the Decoder SDRAM's refresh to 1us.
+- Sleep for 512ms. (600ms is recommended)
+- Transfer the encoder's firmware image to offset 0 in Encoder memory space.
+- Transfer the decoder's firmware image to offset 0 in Decoder memory space.
+- Use a read-modify-write operation to Clear bit 0 of register 0x9050 to
+ re-enable the SPU.
+- Sleep for 1 second.
+- Use a read-modify-write operation to Clear bits 3 and 0 of register 0x9058
+ to re-enable the VPU.
+- Sleep for 1 second.
+- Issue status API commands to both firmware images to verify.
+
diff --git a/Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt b/Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt
new file mode 100644
index 000000000000..93fec32a1188
--- /dev/null
+++ b/Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt
@@ -0,0 +1,54 @@
+The controls for the mux are GPIO [0,1] for source, and GPIO 2 for muting.
+
+GPIO0 GPIO1
+ 0 0 TV Audio
+ 1 0 FM radio
+ 0 1 Line-In
+ 1 1 Mono tuner bypass or CD passthru (tuner specific)
+
+GPIO 16(i believe) is tied to the IR port (if present).
+
+------------------------------------------------------------------------------------
+
+>From the data sheet:
+ Register 24'h20004 PCI Interrupt Status
+ bit [18] IR_SMP_INT Set when 32 input samples have been collected over
+ gpio[16] pin into GP_SAMPLE register.
+
+What's missing from the data sheet:
+
+Setup 4KHz sampling rate (roughly 2x oversampled; good enough for our RC5
+compat remote)
+set register 0x35C050 to 0xa80a80
+
+enable sampling
+set register 0x35C054 to 0x5
+
+Of course, enable the IRQ bit 18 in the interrupt mask register .(and
+provide for a handler)
+
+GP_SAMPLE register is at 0x35C058
+
+Bits are then right shifted into the GP_SAMPLE register at the specified
+rate; you get an interrupt when a full DWORD is recieved.
+You need to recover the actual RC5 bits out of the (oversampled) IR sensor
+bits. (Hint: look for the 0/1and 1/0 crossings of the RC5 bi-phase data) An
+actual raw RC5 code will span 2-3 DWORDS, depending on the actual alignment.
+
+I'm pretty sure when no IR signal is present the receiver is always in a
+marking state(1); but stray light, etc can cause intermittent noise values
+as well. Remember, this is a free running sample of the IR receiver state
+over time, so don't assume any sample starts at any particular place.
+
+http://www.atmel.com/dyn/resources/prod_documents/doc2817.pdf
+This data sheet (google search) seems to have a lovely description of the
+RC5 basics
+
+http://users.pandora.be/nenya/electronics/rc5/ and more data
+
+http://www.ee.washington.edu/circuit_archive/text/ir_decode.txt
+and even a reference to how to decode a bi-phase data stream.
+
+http://www.xs4all.nl/~sbp/knowledge/ir/rc5.htm
+still more info
+
diff --git a/Documentation/video4linux/et61x251.txt b/Documentation/video4linux/et61x251.txt
index 29340282ab5f..cd584f20a997 100644
--- a/Documentation/video4linux/et61x251.txt
+++ b/Documentation/video4linux/et61x251.txt
@@ -1,9 +1,9 @@
- ET61X[12]51 PC Camera Controllers
- Driver for Linux
- =================================
+ ET61X[12]51 PC Camera Controllers
+ Driver for Linux
+ =================================
- - Documentation -
+ - Documentation -
Index
@@ -156,46 +156,46 @@ Name: video_nr
Type: short array (min = 0, max = 64)
Syntax: <-1|n[,...]>
Description: Specify V4L2 minor mode number:
- -1 = use next available
- n = use minor number n
- You can specify up to 64 cameras this way.
- For example:
- video_nr=-1,2,-1 would assign minor number 2 to the second
- registered camera and use auto for the first one and for every
- other camera.
+ -1 = use next available
+ n = use minor number n
+ You can specify up to 64 cameras this way.
+ For example:
+ video_nr=-1,2,-1 would assign minor number 2 to the second
+ registered camera and use auto for the first one and for every
+ other camera.
Default: -1
-------------------------------------------------------------------------------
Name: force_munmap
Type: bool array (min = 0, max = 64)
Syntax: <0|1[,...]>
Description: Force the application to unmap previously mapped buffer memory
- before calling any VIDIOC_S_CROP or VIDIOC_S_FMT ioctl's. Not
- all the applications support this feature. This parameter is
- specific for each detected camera.
- 0 = do not force memory unmapping
- 1 = force memory unmapping (save memory)
+ before calling any VIDIOC_S_CROP or VIDIOC_S_FMT ioctl's. Not
+ all the applications support this feature. This parameter is
+ specific for each detected camera.
+ 0 = do not force memory unmapping
+ 1 = force memory unmapping (save memory)
Default: 0
-------------------------------------------------------------------------------
Name: frame_timeout
Type: uint array (min = 0, max = 64)
Syntax: <n[,...]>
Description: Timeout for a video frame in seconds. This parameter is
- specific for each detected camera. This parameter can be
- changed at runtime thanks to the /sys filesystem interface.
+ specific for each detected camera. This parameter can be
+ changed at runtime thanks to the /sys filesystem interface.
Default: 2
-------------------------------------------------------------------------------
Name: debug
Type: ushort
Syntax: <n>
Description: Debugging information level, from 0 to 3:
- 0 = none (use carefully)
- 1 = critical errors
- 2 = significant informations
- 3 = more verbose messages
- Level 3 is useful for testing only, when only one device
- is used at the same time. It also shows some more informations
- about the hardware being detected. This module parameter can be
- changed at runtime thanks to the /sys filesystem interface.
+ 0 = none (use carefully)
+ 1 = critical errors
+ 2 = significant informations
+ 3 = more verbose messages
+ Level 3 is useful for testing only, when only one device
+ is used at the same time. It also shows some more informations
+ about the hardware being detected. This module parameter can be
+ changed at runtime thanks to the /sys filesystem interface.
Default: 2
-------------------------------------------------------------------------------
diff --git a/Documentation/video4linux/ibmcam.txt b/Documentation/video4linux/ibmcam.txt
index 4a40a2e99451..397a94eb77b8 100644
--- a/Documentation/video4linux/ibmcam.txt
+++ b/Documentation/video4linux/ibmcam.txt
@@ -21,7 +21,7 @@ Internal interface: Video For Linux (V4L)
Supported controls:
- by V4L: Contrast, Brightness, Color, Hue
- by driver options: frame rate, lighting conditions, video format,
- default picture settings, sharpness.
+ default picture settings, sharpness.
SUPPORTED CAMERAS:
@@ -191,66 +191,66 @@ init_model2_sat Integer 0..255 [0x34] init_model2_sat=65
init_model2_yb Integer 0..255 [0xa0] init_model2_yb=200
debug You don't need this option unless you are a developer.
- If you are a developer then you will see in the code
- what values do what. 0=off.
+ If you are a developer then you will see in the code
+ what values do what. 0=off.
flags This is a bit mask, and you can combine any number of
- bits to produce what you want. Usually you don't want
- any of extra features this option provides:
-
- FLAGS_RETRY_VIDIOCSYNC 1 This bit allows to retry failed
- VIDIOCSYNC ioctls without failing.
- Will work with xawtv, will not
- with xrealproducer. Default is
- not set.
- FLAGS_MONOCHROME 2 Activates monochrome (b/w) mode.
- FLAGS_DISPLAY_HINTS 4 Shows colored pixels which have
- magic meaning to developers.
- FLAGS_OVERLAY_STATS 8 Shows tiny numbers on screen,
- useful only for debugging.
- FLAGS_FORCE_TESTPATTERN 16 Shows blue screen with numbers.
- FLAGS_SEPARATE_FRAMES 32 Shows each frame separately, as
- it was received from the camera.
- Default (not set) is to mix the
- preceding frame in to compensate
- for occasional loss of Isoc data
- on high frame rates.
- FLAGS_CLEAN_FRAMES 64 Forces "cleanup" of each frame
- prior to use; relevant only if
- FLAGS_SEPARATE_FRAMES is set.
- Default is not to clean frames,
- this is a little faster but may
- produce flicker if frame rate is
- too high and Isoc data gets lost.
- FLAGS_NO_DECODING 128 This flag turns the video stream
- decoder off, and dumps the raw
- Isoc data from the camera into
- the reading process. Useful to
- developers, but not to users.
+ bits to produce what you want. Usually you don't want
+ any of extra features this option provides:
+
+ FLAGS_RETRY_VIDIOCSYNC 1 This bit allows to retry failed
+ VIDIOCSYNC ioctls without failing.
+ Will work with xawtv, will not
+ with xrealproducer. Default is
+ not set.
+ FLAGS_MONOCHROME 2 Activates monochrome (b/w) mode.
+ FLAGS_DISPLAY_HINTS 4 Shows colored pixels which have
+ magic meaning to developers.
+ FLAGS_OVERLAY_STATS 8 Shows tiny numbers on screen,
+ useful only for debugging.
+ FLAGS_FORCE_TESTPATTERN 16 Shows blue screen with numbers.
+ FLAGS_SEPARATE_FRAMES 32 Shows each frame separately, as
+ it was received from the camera.
+ Default (not set) is to mix the
+ preceding frame in to compensate
+ for occasional loss of Isoc data
+ on high frame rates.
+ FLAGS_CLEAN_FRAMES 64 Forces "cleanup" of each frame
+ prior to use; relevant only if
+ FLAGS_SEPARATE_FRAMES is set.
+ Default is not to clean frames,
+ this is a little faster but may
+ produce flicker if frame rate is
+ too high and Isoc data gets lost.
+ FLAGS_NO_DECODING 128 This flag turns the video stream
+ decoder off, and dumps the raw
+ Isoc data from the camera into
+ the reading process. Useful to
+ developers, but not to users.
framerate This setting controls frame rate of the camera. This is
- an approximate setting (in terms of "worst" ... "best")
- because camera changes frame rate depending on amount
- of light available. Setting 0 is slowest, 6 is fastest.
- Beware - fast settings are very demanding and may not
- work well with all video sizes. Be conservative.
+ an approximate setting (in terms of "worst" ... "best")
+ because camera changes frame rate depending on amount
+ of light available. Setting 0 is slowest, 6 is fastest.
+ Beware - fast settings are very demanding and may not
+ work well with all video sizes. Be conservative.
hue_correction This highly optional setting allows to adjust the
- hue of the image in a way slightly different from
- what usual "hue" control does. Both controls affect
- YUV colorspace: regular "hue" control adjusts only
- U component, and this "hue_correction" option similarly
- adjusts only V component. However usually it is enough
- to tweak only U or V to compensate for colored light or
- color temperature; this option simply allows more
- complicated correction when and if it is necessary.
+ hue of the image in a way slightly different from
+ what usual "hue" control does. Both controls affect
+ YUV colorspace: regular "hue" control adjusts only
+ U component, and this "hue_correction" option similarly
+ adjusts only V component. However usually it is enough
+ to tweak only U or V to compensate for colored light or
+ color temperature; this option simply allows more
+ complicated correction when and if it is necessary.
init_brightness These settings specify _initial_ values which will be
init_contrast used to set up the camera. If your V4L application has
init_color its own controls to adjust the picture then these
init_hue controls will be used too. These options allow you to
- preconfigure the camera when it gets connected, before
- any V4L application connects to it. Good for webcams.
+ preconfigure the camera when it gets connected, before
+ any V4L application connects to it. Good for webcams.
init_model2_rg These initial settings alter color balance of the
init_model2_rg2 camera on hardware level. All four settings may be used
@@ -258,47 +258,47 @@ init_model2_sat to tune the camera to specific lighting conditions. These
init_model2_yb settings only apply to Model 2 cameras.
lighting This option selects one of three hardware-defined
- photosensitivity settings of the camera. 0=bright light,
- 1=Medium (default), 2=Low light. This setting affects
- frame rate: the dimmer the lighting the lower the frame
- rate (because longer exposition time is needed). The
- Model 2 cameras allow values more than 2 for this option,
- thus enabling extremely high sensitivity at cost of frame
- rate, color saturation and imaging sensor noise.
+ photosensitivity settings of the camera. 0=bright light,
+ 1=Medium (default), 2=Low light. This setting affects
+ frame rate: the dimmer the lighting the lower the frame
+ rate (because longer exposition time is needed). The
+ Model 2 cameras allow values more than 2 for this option,
+ thus enabling extremely high sensitivity at cost of frame
+ rate, color saturation and imaging sensor noise.
sharpness This option controls smoothing (noise reduction)
- made by camera. Setting 0 is most smooth, setting 6
- is most sharp. Be aware that CMOS sensor used in the
- camera is pretty noisy, so if you choose 6 you will
- be greeted with "snowy" image. Default is 4. Model 2
- cameras do not support this feature.
+ made by camera. Setting 0 is most smooth, setting 6
+ is most sharp. Be aware that CMOS sensor used in the
+ camera is pretty noisy, so if you choose 6 you will
+ be greeted with "snowy" image. Default is 4. Model 2
+ cameras do not support this feature.
size This setting chooses one of several image sizes that are
- supported by this driver. Cameras may support more, but
- it's difficult to reverse-engineer all formats.
- Following video sizes are supported:
-
- size=0 128x96 (Model 1 only)
- size=1 160x120
- size=2 176x144
- size=3 320x240 (Model 2 only)
- size=4 352x240 (Model 2 only)
- size=5 352x288
- size=6 640x480 (Model 3 only)
-
- The 352x288 is the native size of the Model 1 sensor
- array, so it's the best resolution the camera can
- yield. The best resolution of Model 2 is 176x144, and
- larger images are produced by stretching the bitmap.
- Model 3 has sensor with 640x480 grid, and it works too,
- but the frame rate will be exceptionally low (1-2 FPS);
- it may be still OK for some applications, like security.
- Choose the image size you need. The smaller image can
- support faster frame rate. Default is 352x288.
+ supported by this driver. Cameras may support more, but
+ it's difficult to reverse-engineer all formats.
+ Following video sizes are supported:
+
+ size=0 128x96 (Model 1 only)
+ size=1 160x120
+ size=2 176x144
+ size=3 320x240 (Model 2 only)
+ size=4 352x240 (Model 2 only)
+ size=5 352x288
+ size=6 640x480 (Model 3 only)
+
+ The 352x288 is the native size of the Model 1 sensor
+ array, so it's the best resolution the camera can
+ yield. The best resolution of Model 2 is 176x144, and
+ larger images are produced by stretching the bitmap.
+ Model 3 has sensor with 640x480 grid, and it works too,
+ but the frame rate will be exceptionally low (1-2 FPS);
+ it may be still OK for some applications, like security.
+ Choose the image size you need. The smaller image can
+ support faster frame rate. Default is 352x288.
For more information and the Troubleshooting FAQ visit this URL:
- http://www.linux-usb.org/ibmcam/
+ http://www.linux-usb.org/ibmcam/
WHAT NEEDS TO BE DONE:
diff --git a/Documentation/video4linux/ov511.txt b/Documentation/video4linux/ov511.txt
index 142741e3c578..79af610d4ba5 100644
--- a/Documentation/video4linux/ov511.txt
+++ b/Documentation/video4linux/ov511.txt
@@ -81,7 +81,7 @@ MODULE PARAMETERS:
TYPE: integer (Boolean)
DEFAULT: 1
DESC: Brightness is normally under automatic control and can't be set
- manually by the video app. Set to 0 for manual control.
+ manually by the video app. Set to 0 for manual control.
NAME: autogain
TYPE: integer (Boolean)
@@ -97,13 +97,13 @@ MODULE PARAMETERS:
TYPE: integer (0-6)
DEFAULT: 3
DESC: Sets the threshold for printing debug messages. The higher the value,
- the more is printed. The levels are cumulative, and are as follows:
- 0=no debug messages
- 1=init/detection/unload and other significant messages
- 2=some warning messages
- 3=config/control function calls
- 4=most function calls and data parsing messages
- 5=highly repetitive mesgs
+ the more is printed. The levels are cumulative, and are as follows:
+ 0=no debug messages
+ 1=init/detection/unload and other significant messages
+ 2=some warning messages
+ 3=config/control function calls
+ 4=most function calls and data parsing messages
+ 5=highly repetitive mesgs
NAME: snapshot
TYPE: integer (Boolean)
@@ -116,24 +116,24 @@ MODULE PARAMETERS:
TYPE: integer (1-4 for OV511, 1-31 for OV511+)
DEFAULT: 1
DESC: Number of cameras allowed to stream simultaneously on a single bus.
- Values higher than 1 reduce the data rate of each camera, allowing two
- or more to be used at once. If you have a complicated setup involving
- both OV511 and OV511+ cameras, trial-and-error may be necessary for
- finding the optimum setting.
+ Values higher than 1 reduce the data rate of each camera, allowing two
+ or more to be used at once. If you have a complicated setup involving
+ both OV511 and OV511+ cameras, trial-and-error may be necessary for
+ finding the optimum setting.
NAME: compress
TYPE: integer (Boolean)
DEFAULT: 0
DESC: Set this to 1 to turn on the camera's compression engine. This can
- potentially increase the frame rate at the expense of quality, if you
- have a fast CPU. You must load the proper compression module for your
- camera before starting your application (ov511_decomp or ov518_decomp).
+ potentially increase the frame rate at the expense of quality, if you
+ have a fast CPU. You must load the proper compression module for your
+ camera before starting your application (ov511_decomp or ov518_decomp).
NAME: testpat
TYPE: integer (Boolean)
DEFAULT: 0
DESC: This configures the camera's sensor to transmit a colored test-pattern
- instead of an image. This does not work correctly yet.
+ instead of an image. This does not work correctly yet.
NAME: dumppix
TYPE: integer (0-2)
diff --git a/Documentation/video4linux/sn9c102.txt b/Documentation/video4linux/sn9c102.txt
index 142920bc011f..1d20895b4354 100644
--- a/Documentation/video4linux/sn9c102.txt
+++ b/Documentation/video4linux/sn9c102.txt
@@ -1,9 +1,9 @@
- SN9C10x PC Camera Controllers
- Driver for Linux
- =============================
+ SN9C10x PC Camera Controllers
+ Driver for Linux
+ =============================
- - Documentation -
+ - Documentation -
Index
@@ -176,46 +176,46 @@ Name: video_nr
Type: short array (min = 0, max = 64)
Syntax: <-1|n[,...]>
Description: Specify V4L2 minor mode number:
- -1 = use next available
- n = use minor number n
- You can specify up to 64 cameras this way.
- For example:
- video_nr=-1,2,-1 would assign minor number 2 to the second
- recognized camera and use auto for the first one and for every
- other camera.
+ -1 = use next available
+ n = use minor number n
+ You can specify up to 64 cameras this way.
+ For example:
+ video_nr=-1,2,-1 would assign minor number 2 to the second
+ recognized camera and use auto for the first one and for every
+ other camera.
Default: -1
-------------------------------------------------------------------------------
Name: force_munmap
Type: bool array (min = 0, max = 64)
Syntax: <0|1[,...]>
Description: Force the application to unmap previously mapped buffer memory
- before calling any VIDIOC_S_CROP or VIDIOC_S_FMT ioctl's. Not
- all the applications support this feature. This parameter is
- specific for each detected camera.
- 0 = do not force memory unmapping
- 1 = force memory unmapping (save memory)
+ before calling any VIDIOC_S_CROP or VIDIOC_S_FMT ioctl's. Not
+ all the applications support this feature. This parameter is
+ specific for each detected camera.
+ 0 = do not force memory unmapping
+ 1 = force memory unmapping (save memory)
Default: 0
-------------------------------------------------------------------------------
Name: frame_timeout
Type: uint array (min = 0, max = 64)
Syntax: <n[,...]>
Description: Timeout for a video frame in seconds. This parameter is
- specific for each detected camera. This parameter can be
- changed at runtime thanks to the /sys filesystem interface.
+ specific for each detected camera. This parameter can be
+ changed at runtime thanks to the /sys filesystem interface.
Default: 2
-------------------------------------------------------------------------------
Name: debug
Type: ushort
Syntax: <n>
Description: Debugging information level, from 0 to 3:
- 0 = none (use carefully)
- 1 = critical errors
- 2 = significant informations
- 3 = more verbose messages
- Level 3 is useful for testing only, when only one device
- is used. It also shows some more informations about the
- hardware being detected. This parameter can be changed at
- runtime thanks to the /sys filesystem interface.
+ 0 = none (use carefully)
+ 1 = critical errors
+ 2 = significant informations
+ 3 = more verbose messages
+ Level 3 is useful for testing only, when only one device
+ is used. It also shows some more informations about the
+ hardware being detected. This parameter can be changed at
+ runtime thanks to the /sys filesystem interface.
Default: 2
-------------------------------------------------------------------------------
@@ -280,24 +280,24 @@ Byte # Value Description
0x04 0xC4 Frame synchronisation pattern.
0x05 0x96 Frame synchronisation pattern.
0x06 0xXX Unknown meaning. The exact value depends on the chip;
- possible values are 0x00, 0x01 and 0x20.
+ possible values are 0x00, 0x01 and 0x20.
0x07 0xXX Variable value, whose bits are ff00uzzc, where ff is a
- frame counter, u is unknown, zz is a size indicator
- (00 = VGA, 01 = SIF, 10 = QSIF) and c stands for
- "compression enabled" (1 = yes, 0 = no).
+ frame counter, u is unknown, zz is a size indicator
+ (00 = VGA, 01 = SIF, 10 = QSIF) and c stands for
+ "compression enabled" (1 = yes, 0 = no).
0x08 0xXX Brightness sum inside Auto-Exposure area (low-byte).
0x09 0xXX Brightness sum inside Auto-Exposure area (high-byte).
- For a pure white image, this number will be equal to 500
- times the area of the specified AE area. For images
- that are not pure white, the value scales down according
- to relative whiteness.
+ For a pure white image, this number will be equal to 500
+ times the area of the specified AE area. For images
+ that are not pure white, the value scales down according
+ to relative whiteness.
0x0A 0xXX Brightness sum outside Auto-Exposure area (low-byte).
0x0B 0xXX Brightness sum outside Auto-Exposure area (high-byte).
- For a pure white image, this number will be equal to 125
- times the area outside of the specified AE area. For
- images that are not pure white, the value scales down
- according to relative whiteness.
- according to relative whiteness.
+ For a pure white image, this number will be equal to 125
+ times the area outside of the specified AE area. For
+ images that are not pure white, the value scales down
+ according to relative whiteness.
+ according to relative whiteness.
The following bytes are used by the SN9C103 bridge only:
diff --git a/Documentation/video4linux/v4lgrab.c b/Documentation/video4linux/v4lgrab.c
new file mode 100644
index 000000000000..079b628481cf
--- /dev/null
+++ b/Documentation/video4linux/v4lgrab.c
@@ -0,0 +1,192 @@
+/* Simple Video4Linux image grabber. */
+/*
+ * Video4Linux Driver Test/Example Framegrabbing Program
+ *
+ * Compile with:
+ * gcc -s -Wall -Wstrict-prototypes v4lgrab.c -o v4lgrab
+ * Use as:
+ * v4lgrab >image.ppm
+ *
+ * Copyright (C) 1998-05-03, Phil Blundell <philb@gnu.org>
+ * Copied from http://www.tazenda.demon.co.uk/phil/vgrabber.c
+ * with minor modifications (Dave Forrest, drf5n@virginia.edu).
+ *
+ */
+
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <sys/ioctl.h>
+#include <stdlib.h>
+
+#include <linux/types.h>
+#include <linux/videodev.h>
+
+#define FILE "/dev/video0"
+
+/* Stole this from tvset.c */
+
+#define READ_VIDEO_PIXEL(buf, format, depth, r, g, b) \
+{ \
+ switch (format) \
+ { \
+ case VIDEO_PALETTE_GREY: \
+ switch (depth) \
+ { \
+ case 4: \
+ case 6: \
+ case 8: \
+ (r) = (g) = (b) = (*buf++ << 8);\
+ break; \
+ \
+ case 16: \
+ (r) = (g) = (b) = \
+ *((unsigned short *) buf); \
+ buf += 2; \
+ break; \
+ } \
+ break; \
+ \
+ \
+ case VIDEO_PALETTE_RGB565: \
+ { \
+ unsigned short tmp = *(unsigned short *)buf; \
+ (r) = tmp&0xF800; \
+ (g) = (tmp<<5)&0xFC00; \
+ (b) = (tmp<<11)&0xF800; \
+ buf += 2; \
+ } \
+ break; \
+ \
+ case VIDEO_PALETTE_RGB555: \
+ (r) = (buf[0]&0xF8)<<8; \
+ (g) = ((buf[0] << 5 | buf[1] >> 3)&0xF8)<<8; \
+ (b) = ((buf[1] << 2 ) & 0xF8)<<8; \
+ buf += 2; \
+ break; \
+ \
+ case VIDEO_PALETTE_RGB24: \
+ (r) = buf[0] << 8; (g) = buf[1] << 8; \
+ (b) = buf[2] << 8; \
+ buf += 3; \
+ break; \
+ \
+ default: \
+ fprintf(stderr, \
+ "Format %d not yet supported\n", \
+ format); \
+ } \
+}
+
+int get_brightness_adj(unsigned char *image, long size, int *brightness) {
+ long i, tot = 0;
+ for (i=0;i<size*3;i++)
+ tot += image[i];
+ *brightness = (128 - tot/(size*3))/3;
+ return !((tot/(size*3)) >= 126 && (tot/(size*3)) <= 130);
+}
+
+int main(int argc, char ** argv)
+{
+ int fd = open(FILE, O_RDONLY), f;
+ struct video_capability cap;
+ struct video_window win;
+ struct video_picture vpic;
+
+ unsigned char *buffer, *src;
+ int bpp = 24, r, g, b;
+ unsigned int i, src_depth;
+
+ if (fd < 0) {
+ perror(FILE);
+ exit(1);
+ }
+
+ if (ioctl(fd, VIDIOCGCAP, &cap) < 0) {
+ perror("VIDIOGCAP");
+ fprintf(stderr, "(" FILE " not a video4linux device?)\n");
+ close(fd);
+ exit(1);
+ }
+
+ if (ioctl(fd, VIDIOCGWIN, &win) < 0) {
+ perror("VIDIOCGWIN");
+ close(fd);
+ exit(1);
+ }
+
+ if (ioctl(fd, VIDIOCGPICT, &vpic) < 0) {
+ perror("VIDIOCGPICT");
+ close(fd);
+ exit(1);
+ }
+
+ if (cap.type & VID_TYPE_MONOCHROME) {
+ vpic.depth=8;
+ vpic.palette=VIDEO_PALETTE_GREY; /* 8bit grey */
+ if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) {
+ vpic.depth=6;
+ if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) {
+ vpic.depth=4;
+ if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) {
+ fprintf(stderr, "Unable to find a supported capture format.\n");
+ close(fd);
+ exit(1);
+ }
+ }
+ }
+ } else {
+ vpic.depth=24;
+ vpic.palette=VIDEO_PALETTE_RGB24;
+
+ if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) {
+ vpic.palette=VIDEO_PALETTE_RGB565;
+ vpic.depth=16;
+
+ if(ioctl(fd, VIDIOCSPICT, &vpic)==-1) {
+ vpic.palette=VIDEO_PALETTE_RGB555;
+ vpic.depth=15;
+
+ if(ioctl(fd, VIDIOCSPICT, &vpic)==-1) {
+ fprintf(stderr, "Unable to find a supported capture format.\n");
+ return -1;
+ }
+ }
+ }
+ }
+
+ buffer = malloc(win.width * win.height * bpp);
+ if (!buffer) {
+ fprintf(stderr, "Out of memory.\n");
+ exit(1);
+ }
+
+ do {
+ int newbright;
+ read(fd, buffer, win.width * win.height * bpp);
+ f = get_brightness_adj(buffer, win.width * win.height, &newbright);
+ if (f) {
+ vpic.brightness += (newbright << 8);
+ if(ioctl(fd, VIDIOCSPICT, &vpic)==-1) {
+ perror("VIDIOSPICT");
+ break;
+ }
+ }
+ } while (f);
+
+ fprintf(stdout, "P6\n%d %d 255\n", win.width, win.height);
+
+ src = buffer;
+
+ for (i = 0; i < win.width * win.height; i++) {
+ READ_VIDEO_PIXEL(src, vpic.palette, src_depth, r, g, b);
+ fputc(r>>8, stdout);
+ fputc(g>>8, stdout);
+ fputc(b>>8, stdout);
+ }
+
+ close(fd);
+ return 0;
+}
diff --git a/Documentation/video4linux/w9968cf.txt b/Documentation/video4linux/w9968cf.txt
index 3b704f2aae6d..0d53ce774b01 100644
--- a/Documentation/video4linux/w9968cf.txt
+++ b/Documentation/video4linux/w9968cf.txt
@@ -1,9 +1,9 @@
- W996[87]CF JPEG USB Dual Mode Camera Chip
- Driver for Linux 2.6 (basic version)
- =========================================
+ W996[87]CF JPEG USB Dual Mode Camera Chip
+ Driver for Linux 2.6 (basic version)
+ =========================================
- - Documentation -
+ - Documentation -
Index
@@ -188,57 +188,57 @@ Name: ovmod_load
Type: bool
Syntax: <0|1>
Description: Automatic 'ovcamchip' module loading: 0 disabled, 1 enabled.
- If enabled, 'insmod' searches for the required 'ovcamchip'
- module in the system, according to its configuration, and
- loads that module automatically. This action is performed as
- once soon as the 'w9968cf' module is loaded into memory.
+ If enabled, 'insmod' searches for the required 'ovcamchip'
+ module in the system, according to its configuration, and
+ loads that module automatically. This action is performed as
+ once soon as the 'w9968cf' module is loaded into memory.
Default: 1
Note: The kernel must be compiled with the CONFIG_KMOD option
- enabled for the 'ovcamchip' module to be loaded and for
- this parameter to be present.
+ enabled for the 'ovcamchip' module to be loaded and for
+ this parameter to be present.
-------------------------------------------------------------------------------
Name: simcams
Type: int
Syntax: <n>
Description: Number of cameras allowed to stream simultaneously.
- n may vary from 0 to 32.
+ n may vary from 0 to 32.
Default: 32
-------------------------------------------------------------------------------
Name: video_nr
Type: int array (min = 0, max = 32)
Syntax: <-1|n[,...]>
Description: Specify V4L minor mode number.
- -1 = use next available
- n = use minor number n
- You can specify up to 32 cameras this way.
- For example:
- video_nr=-1,2,-1 would assign minor number 2 to the second
- recognized camera and use auto for the first one and for every
- other camera.
+ -1 = use next available
+ n = use minor number n
+ You can specify up to 32 cameras this way.
+ For example:
+ video_nr=-1,2,-1 would assign minor number 2 to the second
+ recognized camera and use auto for the first one and for every
+ other camera.
Default: -1
-------------------------------------------------------------------------------
Name: packet_size
Type: int array (min = 0, max = 32)
Syntax: <n[,...]>
Description: Specify the maximum data payload size in bytes for alternate
- settings, for each device. n is scaled between 63 and 1023.
+ settings, for each device. n is scaled between 63 and 1023.
Default: 1023
-------------------------------------------------------------------------------
Name: max_buffers
Type: int array (min = 0, max = 32)
Syntax: <n[,...]>
Description: For advanced users.
- Specify the maximum number of video frame buffers to allocate
- for each device, from 2 to 32.
+ Specify the maximum number of video frame buffers to allocate
+ for each device, from 2 to 32.
Default: 2
-------------------------------------------------------------------------------
Name: double_buffer
Type: bool array (min = 0, max = 32)
Syntax: <0|1[,...]>
Description: Hardware double buffering: 0 disabled, 1 enabled.
- It should be enabled if you want smooth video output: if you
- obtain out of sync. video, disable it, or try to
- decrease the 'clockdiv' module parameter value.
+ It should be enabled if you want smooth video output: if you
+ obtain out of sync. video, disable it, or try to
+ decrease the 'clockdiv' module parameter value.
Default: 1 for every device.
-------------------------------------------------------------------------------
Name: clamping
@@ -251,9 +251,9 @@ Name: filter_type
Type: int array (min = 0, max = 32)
Syntax: <0|1|2[,...]>
Description: Video filter type.
- 0 none, 1 (1-2-1) 3-tap filter, 2 (2-3-6-3-2) 5-tap filter.
- The filter is used to reduce noise and aliasing artifacts
- produced by the CCD or CMOS image sensor.
+ 0 none, 1 (1-2-1) 3-tap filter, 2 (2-3-6-3-2) 5-tap filter.
+ The filter is used to reduce noise and aliasing artifacts
+ produced by the CCD or CMOS image sensor.
Default: 0 for every device.
-------------------------------------------------------------------------------
Name: largeview
@@ -266,9 +266,9 @@ Name: upscaling
Type: bool array (min = 0, max = 32)
Syntax: <0|1[,...]>
Description: Software scaling (for non-compressed video only):
- 0 disabled, 1 enabled.
- Disable it if you have a slow CPU or you don't have enough
- memory.
+ 0 disabled, 1 enabled.
+ Disable it if you have a slow CPU or you don't have enough
+ memory.
Default: 0 for every device.
Note: If 'w9968cf-vpp' is not present, this parameter is set to 0.
-------------------------------------------------------------------------------
@@ -276,36 +276,36 @@ Name: decompression
Type: int array (min = 0, max = 32)
Syntax: <0|1|2[,...]>
Description: Software video decompression:
- 0 = disables decompression
- (doesn't allow formats needing decompression).
- 1 = forces decompression
- (allows formats needing decompression only).
- 2 = allows any permitted formats.
- Formats supporting (de)compressed video are YUV422P and
- YUV420P/YUV420 in any resolutions where width and height are
- multiples of 16.
+ 0 = disables decompression
+ (doesn't allow formats needing decompression).
+ 1 = forces decompression
+ (allows formats needing decompression only).
+ 2 = allows any permitted formats.
+ Formats supporting (de)compressed video are YUV422P and
+ YUV420P/YUV420 in any resolutions where width and height are
+ multiples of 16.
Default: 2 for every device.
Note: If 'w9968cf-vpp' is not present, forcing decompression is not
- allowed; in this case this parameter is set to 2.
+ allowed; in this case this parameter is set to 2.
-------------------------------------------------------------------------------
Name: force_palette
Type: int array (min = 0, max = 32)
Syntax: <0|9|10|13|15|8|7|1|6|3|4|5[,...]>
Description: Force picture palette.
- In order:
- 0 = Off - allows any of the following formats:
- 9 = UYVY 16 bpp - Original video, compression disabled
- 10 = YUV420 12 bpp - Original video, compression enabled
- 13 = YUV422P 16 bpp - Original video, compression enabled
- 15 = YUV420P 12 bpp - Original video, compression enabled
- 8 = YUVY 16 bpp - Software conversion from UYVY
- 7 = YUV422 16 bpp - Software conversion from UYVY
- 1 = GREY 8 bpp - Software conversion from UYVY
- 6 = RGB555 16 bpp - Software conversion from UYVY
- 3 = RGB565 16 bpp - Software conversion from UYVY
- 4 = RGB24 24 bpp - Software conversion from UYVY
- 5 = RGB32 32 bpp - Software conversion from UYVY
- When not 0, this parameter will override 'decompression'.
+ In order:
+ 0 = Off - allows any of the following formats:
+ 9 = UYVY 16 bpp - Original video, compression disabled
+ 10 = YUV420 12 bpp - Original video, compression enabled
+ 13 = YUV422P 16 bpp - Original video, compression enabled
+ 15 = YUV420P 12 bpp - Original video, compression enabled
+ 8 = YUVY 16 bpp - Software conversion from UYVY
+ 7 = YUV422 16 bpp - Software conversion from UYVY
+ 1 = GREY 8 bpp - Software conversion from UYVY
+ 6 = RGB555 16 bpp - Software conversion from UYVY
+ 3 = RGB565 16 bpp - Software conversion from UYVY
+ 4 = RGB24 24 bpp - Software conversion from UYVY
+ 5 = RGB32 32 bpp - Software conversion from UYVY
+ When not 0, this parameter will override 'decompression'.
Default: 0 for every device. Initial palette is 9 (UYVY).
Note: If 'w9968cf-vpp' is not present, this parameter is set to 9.
-------------------------------------------------------------------------------
@@ -313,77 +313,77 @@ Name: force_rgb
Type: bool array (min = 0, max = 32)
Syntax: <0|1[,...]>
Description: Read RGB video data instead of BGR:
- 1 = use RGB component ordering.
- 0 = use BGR component ordering.
- This parameter has effect when using RGBX palettes only.
+ 1 = use RGB component ordering.
+ 0 = use BGR component ordering.
+ This parameter has effect when using RGBX palettes only.
Default: 0 for every device.
-------------------------------------------------------------------------------
Name: autobright
Type: bool array (min = 0, max = 32)
Syntax: <0|1[,...]>
Description: Image sensor automatically changes brightness:
- 0 = no, 1 = yes
+ 0 = no, 1 = yes
Default: 0 for every device.
-------------------------------------------------------------------------------
Name: autoexp
Type: bool array (min = 0, max = 32)
Syntax: <0|1[,...]>
Description: Image sensor automatically changes exposure:
- 0 = no, 1 = yes
+ 0 = no, 1 = yes
Default: 1 for every device.
-------------------------------------------------------------------------------
Name: lightfreq
Type: int array (min = 0, max = 32)
Syntax: <50|60[,...]>
Description: Light frequency in Hz:
- 50 for European and Asian lighting, 60 for American lighting.
+ 50 for European and Asian lighting, 60 for American lighting.
Default: 50 for every device.
-------------------------------------------------------------------------------
Name: bandingfilter
Type: bool array (min = 0, max = 32)
Syntax: <0|1[,...]>
Description: Banding filter to reduce effects of fluorescent
- lighting:
- 0 disabled, 1 enabled.
- This filter tries to reduce the pattern of horizontal
- light/dark bands caused by some (usually fluorescent) lighting.
+ lighting:
+ 0 disabled, 1 enabled.
+ This filter tries to reduce the pattern of horizontal
+ light/dark bands caused by some (usually fluorescent) lighting.
Default: 0 for every device.
-------------------------------------------------------------------------------
Name: clockdiv
Type: int array (min = 0, max = 32)
Syntax: <-1|n[,...]>
Description: Force pixel clock divisor to a specific value (for experts):
- n may vary from 0 to 127.
- -1 for automatic value.
- See also the 'double_buffer' module parameter.
+ n may vary from 0 to 127.
+ -1 for automatic value.
+ See also the 'double_buffer' module parameter.
Default: -1 for every device.
-------------------------------------------------------------------------------
Name: backlight
Type: bool array (min = 0, max = 32)
Syntax: <0|1[,...]>
Description: Objects are lit from behind:
- 0 = no, 1 = yes
+ 0 = no, 1 = yes
Default: 0 for every device.
-------------------------------------------------------------------------------
Name: mirror
Type: bool array (min = 0, max = 32)
Syntax: <0|1[,...]>
Description: Reverse image horizontally:
- 0 = no, 1 = yes
+ 0 = no, 1 = yes
Default: 0 for every device.
-------------------------------------------------------------------------------
Name: monochrome
Type: bool array (min = 0, max = 32)
Syntax: <0|1[,...]>
Description: The image sensor is monochrome:
- 0 = no, 1 = yes
+ 0 = no, 1 = yes
Default: 0 for every device.
-------------------------------------------------------------------------------
Name: brightness
Type: long array (min = 0, max = 32)
Syntax: <n[,...]>
Description: Set picture brightness (0-65535).
- This parameter has no effect if 'autobright' is enabled.
+ This parameter has no effect if 'autobright' is enabled.
Default: 31000 for every device.
-------------------------------------------------------------------------------
Name: hue
@@ -414,23 +414,23 @@ Name: debug
Type: int
Syntax: <n>
Description: Debugging information level, from 0 to 6:
- 0 = none (use carefully)
- 1 = critical errors
- 2 = significant informations
- 3 = configuration or general messages
- 4 = warnings
- 5 = called functions
- 6 = function internals
- Level 5 and 6 are useful for testing only, when only one
- device is used.
+ 0 = none (use carefully)
+ 1 = critical errors
+ 2 = significant informations
+ 3 = configuration or general messages
+ 4 = warnings
+ 5 = called functions
+ 6 = function internals
+ Level 5 and 6 are useful for testing only, when only one
+ device is used.
Default: 2
-------------------------------------------------------------------------------
Name: specific_debug
Type: bool
Syntax: <0|1>
Description: Enable or disable specific debugging messages:
- 0 = print messages concerning every level <= 'debug' level.
- 1 = print messages concerning the level indicated by 'debug'.
+ 0 = print messages concerning every level <= 'debug' level.
+ 1 = print messages concerning the level indicated by 'debug'.
Default: 0
-------------------------------------------------------------------------------
diff --git a/Documentation/video4linux/zc0301.txt b/Documentation/video4linux/zc0301.txt
index f55262c6733b..f406f5e80046 100644
--- a/Documentation/video4linux/zc0301.txt
+++ b/Documentation/video4linux/zc0301.txt
@@ -1,9 +1,9 @@
- ZC0301 Image Processor and Control Chip
- Driver for Linux
- =======================================
+ ZC0301 and ZC0301P Image Processor and Control Chip
+ Driver for Linux
+ ===================================================
- - Documentation -
+ - Documentation -
Index
@@ -51,13 +51,13 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
4. Overview and features
========================
-This driver supports the video interface of the devices mounting the ZC0301
-Image Processor and Control Chip.
+This driver supports the video interface of the devices mounting the ZC0301 or
+ZC0301P Image Processors and Control Chips.
The driver relies on the Video4Linux2 and USB core modules. It has been
designed to run properly on SMP systems as well.
-The latest version of the ZC0301 driver can be found at the following URL:
+The latest version of the ZC0301[P] driver can be found at the following URL:
http://www.linux-projects.org/
Some of the features of the driver are:
@@ -117,7 +117,7 @@ supported by the USB Audio driver thanks to the ALSA API:
And finally:
- # USB Multimedia devices
+ # V4L USB devices
#
CONFIG_USB_ZC0301=m
@@ -146,46 +146,46 @@ Name: video_nr
Type: short array (min = 0, max = 64)
Syntax: <-1|n[,...]>
Description: Specify V4L2 minor mode number:
- -1 = use next available
- n = use minor number n
- You can specify up to 64 cameras this way.
- For example:
- video_nr=-1,2,-1 would assign minor number 2 to the second
- registered camera and use auto for the first one and for every
- other camera.
+ -1 = use next available
+ n = use minor number n
+ You can specify up to 64 cameras this way.
+ For example:
+ video_nr=-1,2,-1 would assign minor number 2 to the second
+ registered camera and use auto for the first one and for every
+ other camera.
Default: -1
-------------------------------------------------------------------------------
Name: force_munmap
Type: bool array (min = 0, max = 64)
Syntax: <0|1[,...]>
Description: Force the application to unmap previously mapped buffer memory
- before calling any VIDIOC_S_CROP or VIDIOC_S_FMT ioctl's. Not
- all the applications support this feature. This parameter is
- specific for each detected camera.
- 0 = do not force memory unmapping
- 1 = force memory unmapping (save memory)
+ before calling any VIDIOC_S_CROP or VIDIOC_S_FMT ioctl's. Not
+ all the applications support this feature. This parameter is
+ specific for each detected camera.
+ 0 = do not force memory unmapping
+ 1 = force memory unmapping (save memory)
Default: 0
-------------------------------------------------------------------------------
Name: frame_timeout
Type: uint array (min = 0, max = 64)
Syntax: <n[,...]>
Description: Timeout for a video frame in seconds. This parameter is
- specific for each detected camera. This parameter can be
- changed at runtime thanks to the /sys filesystem interface.
+ specific for each detected camera. This parameter can be
+ changed at runtime thanks to the /sys filesystem interface.
Default: 2
-------------------------------------------------------------------------------
Name: debug
Type: ushort
Syntax: <n>
Description: Debugging information level, from 0 to 3:
- 0 = none (use carefully)
- 1 = critical errors
- 2 = significant informations
- 3 = more verbose messages
- Level 3 is useful for testing only, when only one device
- is used at the same time. It also shows some more informations
- about the hardware being detected. This module parameter can be
- changed at runtime thanks to the /sys filesystem interface.
+ 0 = none (use carefully)
+ 1 = critical errors
+ 2 = significant informations
+ 3 = more verbose messages
+ Level 3 is useful for testing only, when only one device
+ is used at the same time. It also shows some more informations
+ about the hardware being detected. This module parameter can be
+ changed at runtime thanks to the /sys filesystem interface.
Default: 2
-------------------------------------------------------------------------------
@@ -204,11 +204,25 @@ Vendor ID Product ID
0x041e 0x4017
0x041e 0x401c
0x041e 0x401e
+0x041e 0x401f
+0x041e 0x4022
0x041e 0x4034
0x041e 0x4035
+0x041e 0x4036
+0x041e 0x403a
+0x0458 0x7007
+0x0458 0x700C
+0x0458 0x700f
+0x046d 0x08ae
+0x055f 0xd003
+0x055f 0xd004
0x046d 0x08ae
0x0ac8 0x0301
+0x0ac8 0x301b
+0x0ac8 0x303b
+0x10fd 0x0128
0x10fd 0x8050
+0x10fd 0x804e
The list above does not imply that all those devices work with this driver: up
until now only the ones that mount the following image sensors are supported;
@@ -217,6 +231,7 @@ kernel messages will always tell you whether this is the case:
Model Manufacturer
----- ------------
PAS202BCB PixArt Imaging, Inc.
+PB-0330 Photobit Corporation
9. Notes for V4L2 application developers
@@ -250,5 +265,6 @@ the fingerprint is: '88E8 F32F 7244 68BA 3958 5D40 99DA 5D2A FCE6 35A4'.
been taken from the documentation of the ZC030x Video4Linux1 driver written
by Andrew Birkett <andy@nobugs.org>;
- The initialization values of the ZC0301 controller connected to the PAS202BCB
- image sensor have been taken from the SPCA5XX driver maintained by
- Michel Xhaard <mxhaard@magic.fr>.
+ and PB-0330 image sensors have been taken from the SPCA5XX driver maintained
+ by Michel Xhaard <mxhaard@magic.fr>;
+- Stanislav Lechev donated one camera.