summaryrefslogtreecommitdiff
path: root/arch/blackfin
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin')
-rw-r--r--arch/blackfin/Kconfig989
-rw-r--r--arch/blackfin/Makefile80
-rw-r--r--arch/blackfin/boot/Makefile27
-rw-r--r--arch/blackfin/defconfig1314
-rw-r--r--arch/blackfin/kernel/Makefile14
-rw-r--r--arch/blackfin/kernel/asm-offsets.c136
-rw-r--r--arch/blackfin/kernel/bfin_dma_5xx.c742
-rw-r--r--arch/blackfin/kernel/bfin_gpio.c637
-rw-r--r--arch/blackfin/kernel/bfin_ksyms.c119
-rw-r--r--arch/blackfin/kernel/dma-mapping.c183
-rw-r--r--arch/blackfin/kernel/dualcore_test.c49
-rw-r--r--arch/blackfin/kernel/entry.S94
-rw-r--r--arch/blackfin/kernel/flat.c101
-rw-r--r--arch/blackfin/kernel/init_task.c60
-rw-r--r--arch/blackfin/kernel/irqchip.c147
-rw-r--r--arch/blackfin/kernel/module.c429
-rw-r--r--arch/blackfin/kernel/process.c394
-rw-r--r--arch/blackfin/kernel/ptrace.c430
-rw-r--r--arch/blackfin/kernel/setup.c902
-rw-r--r--arch/blackfin/kernel/signal.c356
-rw-r--r--arch/blackfin/kernel/sys_bfin.c115
-rw-r--r--arch/blackfin/kernel/time.c326
-rw-r--r--arch/blackfin/kernel/traps.c649
-rw-r--r--arch/blackfin/kernel/vmlinux.lds.S228
-rw-r--r--arch/blackfin/lib/Makefile11
-rw-r--r--arch/blackfin/lib/ashldi3.c58
-rw-r--r--arch/blackfin/lib/ashrdi3.c59
-rw-r--r--arch/blackfin/lib/checksum.c140
-rw-r--r--arch/blackfin/lib/divsi3.S216
-rw-r--r--arch/blackfin/lib/gcclib.h47
-rw-r--r--arch/blackfin/lib/ins.S69
-rw-r--r--arch/blackfin/lib/lshrdi3.c72
-rw-r--r--arch/blackfin/lib/memchr.S70
-rw-r--r--arch/blackfin/lib/memcmp.S110
-rw-r--r--arch/blackfin/lib/memcpy.S142
-rw-r--r--arch/blackfin/lib/memmove.S103
-rw-r--r--arch/blackfin/lib/memset.S109
-rw-r--r--arch/blackfin/lib/modsi3.S79
-rw-r--r--arch/blackfin/lib/muldi3.c99
-rw-r--r--arch/blackfin/lib/outs.S62
-rw-r--r--arch/blackfin/lib/smulsi3_highpart.S30
-rw-r--r--arch/blackfin/lib/strcmp.c11
-rw-r--r--arch/blackfin/lib/strcpy.c11
-rw-r--r--arch/blackfin/lib/strncmp.c11
-rw-r--r--arch/blackfin/lib/strncpy.c11
-rw-r--r--arch/blackfin/lib/udivsi3.S298
-rw-r--r--arch/blackfin/lib/umodsi3.S66
-rw-r--r--arch/blackfin/lib/umulsi3_highpart.S23
-rw-r--r--arch/blackfin/mach-bf533/Kconfig92
-rw-r--r--arch/blackfin/mach-bf533/Makefile9
-rw-r--r--arch/blackfin/mach-bf533/boards/Makefile8
-rw-r--r--arch/blackfin/mach-bf533/boards/cm_bf533.c267
-rw-r--r--arch/blackfin/mach-bf533/boards/ezkit.c224
-rw-r--r--arch/blackfin/mach-bf533/boards/generic_board.c95
-rw-r--r--arch/blackfin/mach-bf533/boards/stamp.c321
-rw-r--r--arch/blackfin/mach-bf533/cpu.c161
-rw-r--r--arch/blackfin/mach-bf533/head.S774
-rw-r--r--arch/blackfin/mach-bf533/ints-priority.c65
-rw-r--r--arch/blackfin/mach-bf537/Kconfig141
-rw-r--r--arch/blackfin/mach-bf537/Makefile9
-rw-r--r--arch/blackfin/mach-bf537/boards/Makefile9
-rw-r--r--arch/blackfin/mach-bf537/boards/cm_bf537.c364
-rw-r--r--arch/blackfin/mach-bf537/boards/eth_mac.c51
-rw-r--r--arch/blackfin/mach-bf537/boards/generic_board.c445
-rw-r--r--arch/blackfin/mach-bf537/boards/led.S183
-rw-r--r--arch/blackfin/mach-bf537/boards/pnav10.c523
-rw-r--r--arch/blackfin/mach-bf537/boards/stamp.c615
-rw-r--r--arch/blackfin/mach-bf537/cpu.c161
-rw-r--r--arch/blackfin/mach-bf537/head.S602
-rw-r--r--arch/blackfin/mach-bf537/ints-priority.c74
-rw-r--r--arch/blackfin/mach-bf561/Kconfig222
-rw-r--r--arch/blackfin/mach-bf561/Makefile9
-rw-r--r--arch/blackfin/mach-bf561/boards/Makefile7
-rw-r--r--arch/blackfin/mach-bf561/boards/cm_bf561.c289
-rw-r--r--arch/blackfin/mach-bf561/boards/ezkit.c147
-rw-r--r--arch/blackfin/mach-bf561/boards/generic_board.c82
-rw-r--r--arch/blackfin/mach-bf561/coreb.c402
-rw-r--r--arch/blackfin/mach-bf561/head.S512
-rw-r--r--arch/blackfin/mach-bf561/ints-priority.c108
-rw-r--r--arch/blackfin/mach-common/Makefile12
-rw-r--r--arch/blackfin/mach-common/cache.S253
-rw-r--r--arch/blackfin/mach-common/cacheinit.S137
-rw-r--r--arch/blackfin/mach-common/cplbhdlr.S130
-rw-r--r--arch/blackfin/mach-common/cplbinfo.c211
-rw-r--r--arch/blackfin/mach-common/cplbmgr.S607
-rw-r--r--arch/blackfin/mach-common/dpmc.S418
-rw-r--r--arch/blackfin/mach-common/entry.S1207
-rw-r--r--arch/blackfin/mach-common/interrupt.S253
-rw-r--r--arch/blackfin/mach-common/ints-priority-dc.c476
-rw-r--r--arch/blackfin/mach-common/ints-priority-sc.c577
-rw-r--r--arch/blackfin/mach-common/irqpanic.c194
-rw-r--r--arch/blackfin/mach-common/lock.S204
-rw-r--r--arch/blackfin/mach-common/pm.c181
-rw-r--r--arch/blackfin/mm/Makefile5
-rw-r--r--arch/blackfin/mm/blackfin_sram.c540
-rw-r--r--arch/blackfin/mm/blackfin_sram.h38
-rw-r--r--arch/blackfin/mm/init.c208
-rw-r--r--arch/blackfin/oprofile/Kconfig29
-rw-r--r--arch/blackfin/oprofile/Makefile14
-rw-r--r--arch/blackfin/oprofile/common.c168
-rw-r--r--arch/blackfin/oprofile/op_blackfin.h98
-rw-r--r--arch/blackfin/oprofile/op_model_bf533.c161
-rw-r--r--arch/blackfin/oprofile/timer_int.c74
103 files changed, 23594 insertions, 0 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
new file mode 100644
index 000000000000..1a4930509325
--- /dev/null
+++ b/arch/blackfin/Kconfig
@@ -0,0 +1,989 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+mainmenu "uClinux/Blackfin (w/o MMU) Kernel Configuration"
+
+config MMU
+ bool
+ default n
+
+config FPU
+ bool
+ default n
+
+config RWSEM_GENERIC_SPINLOCK
+ bool
+ default y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+ default n
+
+config BLACKFIN
+ bool
+ default y
+
+config BFIN
+ bool
+ default y
+
+config SEMAPHORE_SLEEPERS
+ bool
+ default y
+
+config GENERIC_FIND_NEXT_BIT
+ bool
+ default y
+
+config GENERIC_HWEIGHT
+ bool
+ default y
+
+config GENERIC_HARDIRQS
+ bool
+ default y
+
+config GENERIC_IRQ_PROBE
+ bool
+ default y
+
+config GENERIC_TIME
+ bool
+ default n
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config FORCE_MAX_ZONEORDER
+ int
+ default "14"
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config IRQCHIP_DEMUX_GPIO
+ bool
+ default y
+
+source "init/Kconfig"
+source "kernel/Kconfig.preempt"
+
+menu "Blackfin Processor Options"
+
+comment "Processor and Board Settings"
+
+choice
+ prompt "CPU"
+ default BF533
+
+config BF531
+ bool "BF531"
+ help
+ BF531 Processor Support.
+
+config BF532
+ bool "BF532"
+ help
+ BF532 Processor Support.
+
+config BF533
+ bool "BF533"
+ help
+ BF533 Processor Support.
+
+config BF534
+ bool "BF534"
+ help
+ BF534 Processor Support.
+
+config BF536
+ bool "BF536"
+ help
+ BF536 Processor Support.
+
+config BF537
+ bool "BF537"
+ help
+ BF537 Processor Support.
+
+config BF561
+ bool "BF561"
+ help
+ Not Supported Yet - Work in progress - BF561 Processor Support.
+
+endchoice
+
+choice
+ prompt "Silicon Rev"
+ default BF_REV_0_2 if BF537
+ default BF_REV_0_3 if BF533
+
+config BF_REV_0_2
+ bool "0.2"
+ depends on (BF537 || BF536 || BF534)
+
+config BF_REV_0_3
+ bool "0.3"
+ depends on (BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531)
+
+config BF_REV_0_4
+ bool "0.4"
+ depends on (BF561 || BF533 || BF532 || BF531)
+
+config BF_REV_0_5
+ bool "0.5"
+ depends on (BF561 || BF533 || BF532 || BF531)
+
+endchoice
+
+config BFIN_DUAL_CORE
+ bool
+ depends on (BF561)
+ default y
+
+config BFIN_SINGLE_CORE
+ bool
+ depends on !BFIN_DUAL_CORE
+ default y
+
+choice
+ prompt "System type"
+ default BFIN533_STAMP
+ help
+ Do NOT change the board here. Please use the top level
+ configuration to ensure that all the other settings are
+ correct.
+
+config BFIN533_EZKIT
+ bool "BF533-EZKIT"
+ depends on (BF533 || BF532 || BF531)
+ help
+ BF533-EZKIT-LITE board Support.
+
+config BFIN533_STAMP
+ bool "BF533-STAMP"
+ depends on (BF533 || BF532 || BF531)
+ help
+ BF533-STAMP board Support.
+
+config BFIN537_STAMP
+ bool "BF537-STAMP"
+ depends on (BF537 || BF536 || BF534)
+ help
+ BF537-STAMP board Support.
+
+config BFIN533_BLUETECHNIX_CM
+ bool "Bluetechnix CM-BF533"
+ depends on (BF533)
+ help
+ CM-BF533 support for EVAL- and DEV-Board.
+
+config BFIN537_BLUETECHNIX_CM
+ bool "Bluetechnix CM-BF537"
+ depends on (BF537)
+ help
+ CM-BF537 support for EVAL- and DEV-Board.
+
+config BFIN561_BLUETECHNIX_CM
+ bool "BF561-CM"
+ depends on (BF561)
+ help
+ CM-BF561 support for EVAL- and DEV-Board.
+
+config BFIN561_EZKIT
+ bool "BF561-EZKIT"
+ depends on (BF561)
+ help
+ BF561-EZKIT-LITE board Support.
+
+config PNAV10
+ bool "PNAV 1.0 board"
+ depends on (BF537)
+ help
+ PNAV 1.0 board Support.
+
+config GENERIC_BOARD
+ bool "Custom"
+ depends on (BF537 || BF536 \
+ || BF534 || BF561 || BF535 || BF533 || BF532 || BF531)
+ help
+ GENERIC or Custom board Support.
+
+endchoice
+
+config MEM_GENERIC_BOARD
+ bool
+ depends on GENERIC_BOARD
+ default y
+
+config MEM_MT48LC64M4A2FB_7E
+ bool
+ depends on (BFIN533_STAMP)
+ default y
+
+config MEM_MT48LC16M16A2TG_75
+ bool
+ depends on (BFIN533_EZKIT || BFIN561_EZKIT \
+ || BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM)
+ default y
+
+config MEM_MT48LC32M8A2_75
+ bool
+ depends on (BFIN537_STAMP || PNAV10)
+ default y
+
+config MEM_MT48LC8M32B2B5_7
+ bool
+ depends on (BFIN561_BLUETECHNIX_CM)
+ default y
+
+config BFIN_SHARED_FLASH_ENET
+ bool
+ depends on (BFIN533_STAMP)
+ default y
+
+source "arch/blackfin/mach-bf533/Kconfig"
+source "arch/blackfin/mach-bf561/Kconfig"
+source "arch/blackfin/mach-bf537/Kconfig"
+
+menu "Board customizations"
+
+config CMDLINE_BOOL
+ bool "Default bootloader kernel arguments"
+
+config CMDLINE
+ string "Initial kernel command string"
+ depends on CMDLINE_BOOL
+ default "console=ttyBF0,57600"
+ help
+ If you don't have a boot loader capable of passing a command line string
+ to the kernel, you may specify one here. As a minimum, you should specify
+ the memory size and the root device (e.g., mem=8M, root=/dev/nfs).
+
+comment "Board Setup"
+
+config CLKIN_HZ
+ int "Crystal Frequency in Hz"
+ default "11059200" if BFIN533_STAMP
+ default "27000000" if BFIN533_EZKIT
+ default "25000000" if BFIN537_STAMP
+ default "30000000" if BFIN561_EZKIT
+ default "24576000" if PNAV10
+ help
+ The frequency of CLKIN crystal oscillator on the board in Hz.
+
+config MEM_SIZE
+ int "SDRAM Memory Size in MBytes"
+ default 32 if BFIN533_EZKIT
+ default 64 if BFIN537_STAMP
+ default 64 if BFIN561_EZKIT
+ default 128 if BFIN533_STAMP
+ default 64 if PNAV10
+
+config MEM_ADD_WIDTH
+ int "SDRAM Memory Address Width"
+ default 9 if BFIN533_EZKIT
+ default 9 if BFIN561_EZKIT
+ default 10 if BFIN537_STAMP
+ default 11 if BFIN533_STAMP
+ default 10 if PNAV10
+
+config ENET_FLASH_PIN
+ int "PF port/pin used for flash and ethernet sharing"
+ depends on (BFIN533_STAMP)
+ default 0
+ help
+ PF port/pin used for flash and ethernet sharing to allow other PF
+ pins to be used on other platforms without having to touch common
+ code.
+ For example: PF0 --> 0,PF1 --> 1,PF2 --> 2, etc.
+
+config BOOT_LOAD
+ hex "Kernel load address for booting"
+ default "0x1000"
+ help
+ This option allows you to set the load address of the kernel.
+ This can be useful if you are on a board which has a small amount
+ of memory or you wish to reserve some memory at the beginning of
+ the address space.
+
+ Note that you generally want to keep this value at or above 4k
+ (0x1000) as this will allow the kernel to capture NULL pointer
+ references.
+
+comment "LED Status Indicators"
+ depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM)
+
+config BFIN_ALIVE_LED
+ bool "Enable Board Alive"
+ depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM)
+ default n
+ help
+ Blink the LEDs you select when the kernel is running. Helps detect
+ a hung kernel.
+
+config BFIN_ALIVE_LED_NUM
+ int "LED"
+ depends on BFIN_ALIVE_LED
+ range 1 3 if BFIN533_STAMP
+ default "3" if BFIN533_STAMP
+ help
+ Select the LED (marked on the board) for you to blink.
+
+config BFIN_IDLE_LED
+ bool "Enable System Load/Idle LED"
+ depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM)
+ default n
+ help
+ Blinks the LED you select when to determine kernel load.
+
+config BFIN_IDLE_LED_NUM
+ int "LED"
+ depends on BFIN_IDLE_LED
+ range 1 3 if BFIN533_STAMP
+ default "2" if BFIN533_STAMP
+ help
+ Select the LED (marked on the board) for you to blink.
+
+#
+# Sorry - but you need to put the hex address here -
+#
+
+# Flag Data register
+config BFIN_ALIVE_LED_PORT
+ hex
+ default 0xFFC00700 if (BFIN533_STAMP)
+
+# Peripheral Flag Direction Register
+config BFIN_ALIVE_LED_DPORT
+ hex
+ default 0xFFC00730 if (BFIN533_STAMP)
+
+config BFIN_ALIVE_LED_PIN
+ hex
+ default 0x04 if (BFIN533_STAMP && BFIN_ALIVE_LED_NUM = 1)
+ default 0x08 if (BFIN533_STAMP && BFIN_ALIVE_LED_NUM = 2)
+ default 0x10 if (BFIN533_STAMP && BFIN_ALIVE_LED_NUM = 3)
+
+config BFIN_IDLE_LED_PORT
+ hex
+ default 0xFFC00700 if (BFIN533_STAMP)
+
+# Peripheral Flag Direction Register
+config BFIN_IDLE_LED_DPORT
+ hex
+ default 0xFFC00730 if (BFIN533_STAMP)
+
+config BFIN_IDLE_LED_PIN
+ hex
+ default 0x04 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 1)
+ default 0x08 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 2)
+ default 0x10 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 3)
+
+comment "Console UART Setup"
+
+choice
+ prompt "Baud Rate"
+ default BAUD_57600
+config BAUD_9600
+ bool "9600"
+config BAUD_19200
+ bool "19200"
+config BAUD_38400
+ bool "38400"
+config BAUD_57600
+ bool "57600"
+config BAUD_115200
+ bool "115200"
+endchoice
+
+choice
+ prompt "Parity"
+ default BAUD_NO_PARITY
+config BAUD_NO_PARITY
+ bool "No Parity"
+config BAUD_PARITY
+ bool "Parity"
+endchoice
+
+choice
+ prompt "Stop Bits"
+ default BAUD_1_STOPBIT
+config BAUD_1_STOPBIT
+ bool "1"
+config BAUD_2_STOPBIT
+ bool "2"
+endchoice
+
+endmenu
+
+
+menu "Blackfin Kernel Optimizations"
+
+comment "Timer Tick"
+
+source kernel/Kconfig.hz
+
+comment "Memory Optimizations"
+
+config I_ENTRY_L1
+ bool "Locate interrupt entry code in L1 Memory"
+ default y
+ help
+ If enabled interrupt entry code (STORE/RESTORE CONTEXT) is linked
+ into L1 instruction memory.(less latency)
+
+config EXCPT_IRQ_SYSC_L1
+ bool "Locate entire ASM lowlevel excepetion / interrupt - Syscall and CPLB handler code in L1 Memory"
+ default y
+ help
+ If enabled entire ASM lowlevel exception and interrupt entry code (STORE/RESTORE CONTEXT) is linked
+ into L1 instruction memory.(less latency)
+
+config DO_IRQ_L1
+ bool "Locate frequently called do_irq dispatcher function in L1 Memory"
+ default y
+ help
+ If enabled frequently called do_irq dispatcher function is linked
+ into L1 instruction memory.(less latency)
+
+config CORE_TIMER_IRQ_L1
+ bool "Locate frequently called timer_interrupt() function in L1 Memory"
+ default y
+ help
+ If enabled frequently called timer_interrupt() function is linked
+ into L1 instruction memory.(less latency)
+
+config IDLE_L1
+ bool "Locate frequently idle function in L1 Memory"
+ default y
+ help
+ If enabled frequently called idle function is linked
+ into L1 instruction memory.(less latency)
+
+config SCHEDULE_L1
+ bool "Locate kernel schedule function in L1 Memory"
+ default y
+ help
+ If enabled frequently called kernel schedule is linked
+ into L1 instruction memory.(less latency)
+
+config ARITHMETIC_OPS_L1
+ bool "Locate kernel owned arithmetic functions in L1 Memory"
+ default y
+ help
+ If enabled arithmetic functions are linked
+ into L1 instruction memory.(less latency)
+
+config ACCESS_OK_L1
+ bool "Locate access_ok function in L1 Memory"
+ default y
+ help
+ If enabled access_ok function is linked
+ into L1 instruction memory.(less latency)
+
+config MEMSET_L1
+ bool "Locate memset function in L1 Memory"
+ default y
+ help
+ If enabled memset function is linked
+ into L1 instruction memory.(less latency)
+
+config MEMCPY_L1
+ bool "Locate memcpy function in L1 Memory"
+ default y
+ help
+ If enabled memcpy function is linked
+ into L1 instruction memory.(less latency)
+
+config SYS_BFIN_SPINLOCK_L1
+ bool "Locate sys_bfin_spinlock function in L1 Memory"
+ default y
+ help
+ If enabled sys_bfin_spinlock function is linked
+ into L1 instruction memory.(less latency)
+
+config IP_CHECKSUM_L1
+ bool "Locate IP Checksum function in L1 Memory"
+ default n
+ help
+ If enabled IP Checksum function is linked
+ into L1 instruction memory.(less latency)
+
+config CACHELINE_ALIGNED_L1
+ bool "Locate cacheline_aligned data to L1 Data Memory"
+ default y
+ depends on !BF531
+ help
+ If enabled cacheline_anligned data is linked
+ into L1 data memory.(less latency)
+
+config SYSCALL_TAB_L1
+ bool "Locate Syscall Table L1 Data Memory"
+ default n
+ depends on !BF531
+ help
+ If enabled the Syscall LUT is linked
+ into L1 data memory.(less latency)
+
+config CPLB_SWITCH_TAB_L1
+ bool "Locate CPLB Switch Tables L1 Data Memory"
+ default n
+ depends on !BF531
+ help
+ If enabled the CPLB Switch Tables are linked
+ into L1 data memory.(less latency)
+
+endmenu
+
+
+choice
+ prompt "Kernel executes from"
+ help
+ Choose the memory type that the kernel will be running in.
+
+config RAMKERNEL
+ bool "RAM"
+ help
+ The kernel will be resident in RAM when running.
+
+config ROMKERNEL
+ bool "ROM"
+ help
+ The kernel will be resident in FLASH/ROM when running.
+
+endchoice
+
+source "mm/Kconfig"
+
+config LARGE_ALLOCS
+ bool "Allow allocating large blocks (> 1MB) of memory"
+ help
+ Allow the slab memory allocator to keep chains for very large
+ memory sizes - upto 32MB. You may need this if your system has
+ a lot of RAM, and you need to able to allocate very large
+ contiguous chunks. If unsure, say N.
+
+config BFIN_DMA_5XX
+ bool "Enable DMA Support"
+ depends on (BF533 || BF532 || BF531 || BF537 || BF536 || BF534 || BF561)
+ default y
+ help
+ DMA driver for BF5xx.
+
+choice
+ prompt "Uncached SDRAM region"
+ default DMA_UNCACHED_1M
+ depends BFIN_DMA_5XX
+config DMA_UNCACHED_2M
+ bool "Enable 2M DMA region"
+config DMA_UNCACHED_1M
+ bool "Enable 1M DMA region"
+config DMA_UNCACHED_NONE
+ bool "Disable DMA region"
+endchoice
+
+
+comment "Cache Support"
+config BLKFIN_CACHE
+ bool "Enable ICACHE"
+config BLKFIN_DCACHE
+ bool "Enable DCACHE"
+config BLKFIN_DCACHE_BANKA
+ bool "Enable only 16k BankA DCACHE - BankB is SRAM"
+ depends on BLKFIN_DCACHE && !BF531
+ default n
+config BLKFIN_CACHE_LOCK
+ bool "Enable Cache Locking"
+
+choice
+ prompt "Policy"
+ depends on BLKFIN_DCACHE
+ default BLKFIN_WB
+config BLKFIN_WB
+ bool "Write back"
+ help
+ Write Back Policy:
+ Cached data will be written back to SDRAM only when needed.
+ This can give a nice increase in performance, but beware of
+ broken drivers that do not properly invalidate/flush their
+ cache.
+
+ Write Through Policy:
+ Cached data will always be written back to SDRAM when the
+ cache is updated. This is a completely safe setting, but
+ performance is worse than Write Back.
+
+ If you are unsure of the options and you want to be safe,
+ then go with Write Through.
+
+config BLKFIN_WT
+ bool "Write through"
+ help
+ Write Back Policy:
+ Cached data will be written back to SDRAM only when needed.
+ This can give a nice increase in performance, but beware of
+ broken drivers that do not properly invalidate/flush their
+ cache.
+
+ Write Through Policy:
+ Cached data will always be written back to SDRAM when the
+ cache is updated. This is a completely safe setting, but
+ performance is worse than Write Back.
+
+ If you are unsure of the options and you want to be safe,
+ then go with Write Through.
+
+endchoice
+
+config L1_MAX_PIECE
+ int "Set the max L1 SRAM pieces"
+ default 16
+ help
+ Set the max memory pieces for the L1 SRAM allocation algorithm.
+ Min value is 16. Max value is 1024.
+
+menu "Clock Settings"
+
+
+config BFIN_KERNEL_CLOCK
+ bool "Re-program Clocks while Kernel boots?"
+ default n
+ help
+ This option decides if kernel clocks are re-programed from the
+ bootloader settings. If the clocks are not set, the SDRAM settings
+ are also not changed, and the Bootloader does 100% of the hardware
+ configuration.
+
+config VCO_MULT
+ int "VCO Multiplier"
+ depends on BFIN_KERNEL_CLOCK
+ default "22" if BFIN533_EZKIT
+ default "45" if BFIN533_STAMP
+ default "20" if BFIN537_STAMP
+ default "22" if BFIN533_BLUETECHNIX_CM
+ default "20" if BFIN537_BLUETECHNIX_CM
+ default "20" if BFIN561_BLUETECHNIX_CM
+ default "20" if BFIN561_EZKIT
+
+config CCLK_DIV
+ int "Core Clock Divider"
+ depends on BFIN_KERNEL_CLOCK
+ default 1 if BFIN533_EZKIT
+ default 1 if BFIN533_STAMP
+ default 1 if BFIN537_STAMP
+ default 1 if BFIN533_BLUETECHNIX_CM
+ default 1 if BFIN537_BLUETECHNIX_CM
+ default 1 if BFIN561_BLUETECHNIX_CM
+ default 1 if BFIN561_EZKIT
+
+config SCLK_DIV
+ int "System Clock Divider"
+ depends on BFIN_KERNEL_CLOCK
+ default 5 if BFIN533_EZKIT
+ default 5 if BFIN533_STAMP
+ default 4 if BFIN537_STAMP
+ default 5 if BFIN533_BLUETECHNIX_CM
+ default 4 if BFIN537_BLUETECHNIX_CM
+ default 4 if BFIN561_BLUETECHNIX_CM
+ default 5 if BFIN561_EZKIT
+
+config CLKIN_HALF
+ bool "Half ClockIn"
+ depends on BFIN_KERNEL_CLOCK
+ default n
+
+config PLL_BYPASS
+ bool "Bypass PLL"
+ depends on BFIN_KERNEL_CLOCK
+ default n
+
+endmenu
+
+comment "Asynchonous Memory Configuration"
+
+menu "EBIU_AMBCTL Global Control"
+config C_AMCKEN
+ bool "Enable CLKOUT"
+ default y
+
+config C_CDPRIO
+ bool "DMA has priority over core for ext. accesses"
+ default n
+
+config C_B0PEN
+ depends on BF561
+ bool "Bank 0 16 bit packing enable"
+ default y
+
+config C_B1PEN
+ depends on BF561
+ bool "Bank 1 16 bit packing enable"
+ default y
+
+config C_B2PEN
+ depends on BF561
+ bool "Bank 2 16 bit packing enable"
+ default y
+
+config C_B3PEN
+ depends on BF561
+ bool "Bank 3 16 bit packing enable"
+ default n
+
+choice
+ prompt"Enable Asynchonous Memory Banks"
+ default C_AMBEN_ALL
+
+config C_AMBEN
+ bool "Disable All Banks"
+
+config C_AMBEN_B0
+ bool "Enable Bank 0"
+
+config C_AMBEN_B0_B1
+ bool "Enable Bank 0 & 1"
+
+config C_AMBEN_B0_B1_B2
+ bool "Enable Bank 0 & 1 & 2"
+
+config C_AMBEN_ALL
+ bool "Enable All Banks"
+endchoice
+endmenu
+
+menu "EBIU_AMBCTL Control"
+config BANK_0
+ hex "Bank 0"
+ default 0x7BB0
+
+config BANK_1
+ hex "Bank 1"
+ default 0x7BB0
+
+config BANK_2
+ hex "Bank 2"
+ default 0x7BB0
+
+config BANK_3
+ hex "Bank 3"
+ default 0x99B3
+endmenu
+
+endmenu
+
+#############################################################################
+menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
+
+config PCI
+ bool "PCI support"
+ help
+ Support for PCI bus.
+
+source "drivers/pci/Kconfig"
+
+config HOTPLUG
+ bool "Support for hot-pluggable device"
+ help
+ Say Y here if you want to plug devices into your computer while
+ the system is running, and be able to use them quickly. In many
+ cases, the devices can likewise be unplugged at any time too.
+
+ One well known example of this is PCMCIA- or PC-cards, credit-card
+ size devices such as network cards, modems or hard drives which are
+ plugged into slots found on all modern laptop computers. Another
+ example, used on modern desktops as well as laptops, is USB.
+
+ Enable HOTPLUG and KMOD, and build a modular kernel. Get agent
+ software (at <http://linux-hotplug.sourceforge.net/>) and install it.
+ Then your kernel will automatically call out to a user mode "policy
+ agent" (/sbin/hotplug) to load modules and set up software needed
+ to use devices as you hotplug them.
+
+source "drivers/pcmcia/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+endmenu
+
+menu "Executable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+menu "Power management options"
+source "kernel/power/Kconfig"
+
+choice
+ prompt "Select PM Wakeup Event Source"
+ default PM_WAKEUP_GPIO_BY_SIC_IWR
+ depends on PM
+ help
+ If you have a GPIO already configured as input with the corresponding PORTx_MASK
+ bit set - "Specify Wakeup Event by SIC_IWR value"
+
+config PM_WAKEUP_GPIO_BY_SIC_IWR
+ bool "Specify Wakeup Event by SIC_IWR value"
+config PM_WAKEUP_BY_GPIO
+ bool "Cause Wakeup Event by GPIO"
+config PM_WAKEUP_GPIO_API
+ bool "Configure Wakeup Event by PM GPIO API"
+
+endchoice
+
+config PM_WAKEUP_SIC_IWR
+ hex "Wakeup Events (SIC_IWR)"
+ depends on PM_WAKEUP_GPIO_BY_SIC_IWR
+ default 0x80000000 if (BF537 || BF536 || BF534)
+ default 0x100000 if (BF533 || BF532 || BF531)
+
+config PM_WAKEUP_GPIO_NUMBER
+ int "Wakeup GPIO number"
+ range 0 47
+ depends on PM_WAKEUP_BY_GPIO
+ default 2 if BFIN537_STAMP
+
+choice
+ prompt "GPIO Polarity"
+ depends on PM_WAKEUP_BY_GPIO
+ default PM_WAKEUP_GPIO_POLAR_H
+config PM_WAKEUP_GPIO_POLAR_H
+ bool "Active High"
+config PM_WAKEUP_GPIO_POLAR_L
+ bool "Active Low"
+config PM_WAKEUP_GPIO_POLAR_EDGE_F
+ bool "Falling EDGE"
+config PM_WAKEUP_GPIO_POLAR_EDGE_R
+ bool "Rising EDGE"
+config PM_WAKEUP_GPIO_POLAR_EDGE_B
+ bool "Both EDGE"
+endchoice
+
+endmenu
+
+if (BF537 || BF533)
+
+menu "CPU Frequency scaling"
+
+source "drivers/cpufreq/Kconfig"
+
+config CPU_FREQ
+ bool
+ default n
+ help
+ If you want to enable this option, you should select the
+ DPMC driver from Character Devices.
+endmenu
+
+endif
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/blackfin/oprofile/Kconfig"
+
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config DEBUG_HWERR
+ bool "Hardware error interrupt debugging"
+ depends on DEBUG_KERNEL
+ help
+ When enabled, the hardware error interrupt is never disabled, and
+ will happen immediately when an error condition occurs. This comes
+ at a slight cost in code size, but is necessary if you are getting
+ hardware error interrupts and need to know where they are coming
+ from.
+
+config DEBUG_ICACHE_CHECK
+ bool "Check Instruction cache coherancy"
+ depends on DEBUG_KERNEL
+ depends on DEBUG_HWERR
+ help
+ Say Y here if you are getting wierd unexplained errors. This will
+ ensure that icache is what SDRAM says it should be, by doing a
+ byte wise comparision between SDRAM and instruction cache. This
+ also relocates the irq_panic() function to L1 memory, (which is
+ un-cached).
+
+config DEBUG_KERNEL_START
+ bool "Debug Kernel Startup"
+ depends on DEBUG_KERNEL
+ help
+ Say Y here to put in an mini-execption handler before the kernel
+ replaces the bootloader exception handler. This will stop kernels
+ from dieing at startup with no visible error messages.
+
+config DEBUG_SERIAL_EARLY_INIT
+ bool "Initialize serial driver early"
+ default n
+ depends on SERIAL_BFIN
+ help
+ Say Y here if you want to get kernel output early when kernel
+ crashes before the normal console initialization. If this option
+ is enable, console output will always go to the ttyBF0, no matter
+ what kernel boot paramters you set.
+
+config DEBUG_HUNT_FOR_ZERO
+ bool "Catch NULL pointer reads/writes"
+ default y
+ help
+ Say Y here to catch reads/writes to anywhere in the memory range
+ from 0x0000 - 0x0FFF (the first 4k) of memory. This is useful in
+ catching common programming errors such as NULL pointer dereferences.
+
+ Misbehaving applications will be killed (generate a SEGV) while the
+ kernel will trigger a panic.
+
+ Enabling this option will take up an extra entry in CPLB table.
+ Otherwise, there is no extra overhead.
+
+config DEBUG_BFIN_NO_KERN_HWTRACE
+ bool "Trace user apps (turn off hwtrace in kernel)"
+ default n
+ help
+ Some pieces of the kernel contain a lot of flow changes which can
+ quickly fill up the hardware trace buffer. When debugging crashes,
+ the hardware trace may indicate that the problem lies in kernel
+ space when in reality an application is buggy.
+
+ Say Y here to disable hardware tracing in some known "jumpy" pieces
+ of code so that the trace buffer will extend further back.
+
+config DUAL_CORE_TEST_MODULE
+ tristate "Dual Core Test Module"
+ depends on (BF561)
+ default n
+ help
+ Say Y here to build-in dual core test module for dual core test.
+
+config CPLB_INFO
+ bool "Display the CPLB information"
+ help
+ Display the CPLB information.
+
+config ACCESS_CHECK
+ bool "Check the user pointer address"
+ default y
+ help
+ Usually the pointer transfer from user space is checked to see if its
+ address is in the kernel space.
+
+ Say N here to disable that check to improve the performance.
+
+endmenu
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
new file mode 100644
index 000000000000..52d4dbdb2b1a
--- /dev/null
+++ b/arch/blackfin/Makefile
@@ -0,0 +1,80 @@
+#
+# arch/blackfin/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+
+CROSS_COMPILE ?= bfin-uclinux-
+LDFLAGS_vmlinux := -X
+OBJCOPYFLAGS := -O binary -R .note -R .comment -S
+GZFLAGS := -9
+
+CFLAGS_MODULE += -mlong-calls
+KALLSYMS += --symbol-prefix=_
+
+
+# setup the machine name and the machine dependent settings
+machine-$(CONFIG_BF531) := bf533
+machine-$(CONFIG_BF532) := bf533
+machine-$(CONFIG_BF533) := bf533
+machine-$(CONFIG_BF534) := bf537
+machine-$(CONFIG_BF536) := bf537
+machine-$(CONFIG_BF537) := bf537
+machine-$(CONFIG_BF561) := bf561
+MACHINE := $(machine-y)
+export MACHINE
+
+
+head-y := arch/$(ARCH)/mach-$(MACHINE)/head.o arch/$(ARCH)/kernel/init_task.o
+
+core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/ arch/$(ARCH)/mach-common/
+
+# If we have a machine-specific directory, then include it in the build.
+ifneq ($(machine-y),)
+core-y += arch/$(ARCH)/mach-$(MACHINE)/
+core-y += arch/$(ARCH)/mach-$(MACHINE)/boards/
+endif
+
+libs-y += arch/$(ARCH)/lib/
+
+drivers-$(CONFIG_OPROFILE) += arch/$(ARCH)/oprofile/
+
+
+
+# Update machine arch symlinks if something which affects
+# them changed. We use .mach to indicate when they were updated
+# last, otherwise make uses the target directory mtime.
+
+include/asm-blackfin/.mach: $(wildcard include/config/arch/*.h) include/config/auto.conf
+ @echo ' SYMLINK include/asm-$(ARCH)/mach-$(MACHINE) -> include/asm-$(ARCH)/mach'
+ifneq ($(KBUILD_SRC),)
+ $(Q)mkdir -p include/asm-$(ARCH)
+ $(Q)ln -fsn $(srctree)/include/asm-$(ARCH)/mach-$(MACHINE) include/asm-$(ARCH)/mach
+else
+ $(Q)ln -fsn mach-$(MACHINE) include/asm-$(ARCH)/mach
+endif
+ @touch $@
+
+CLEAN_FILES += \
+ include/asm-$(ARCH)/asm-offsets.h \
+ arch/$(ARCH)/kernel/asm-offsets.s \
+ include/asm-$(ARCH)/mach \
+ include/asm-$(ARCH)/.mach
+
+archprepare: include/asm-blackfin/.mach
+archclean:
+ $(Q)$(MAKE) $(clean)=$(boot)
+
+
+all: vmImage
+boot := arch/$(ARCH)/boot
+BOOT_TARGETS = vmImage
+.PHONY: $(BOOT_TARGETS)
+$(BOOT_TARGETS): vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+define archhelp
+ echo '* vmImage - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage)'
+endef
diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile
new file mode 100644
index 000000000000..49e8098d4c21
--- /dev/null
+++ b/arch/blackfin/boot/Makefile
@@ -0,0 +1,27 @@
+#
+# arch/blackfin/boot/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+MKIMAGE := $(srctree)/scripts/mkuboot.sh
+
+targets := vmImage
+extra-y += vmlinux.bin vmlinux.gz
+
+quiet_cmd_uimage = UIMAGE $@
+ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(ARCH) -O linux -T kernel \
+ -C gzip -a $(CONFIG_BOOT_LOAD) -e $(CONFIG_BOOT_LOAD) -n 'Linux-$(KERNELRELEASE)' \
+ -d $< $@
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,gzip)
+
+$(obj)/vmImage: $(obj)/vmlinux.gz
+ $(call if_changed,uimage)
+ @echo 'Kernel: $@ is ready'
diff --git a/arch/blackfin/defconfig b/arch/blackfin/defconfig
new file mode 100644
index 000000000000..d5904ca994cf
--- /dev/null
+++ b/arch/blackfin/defconfig
@@ -0,0 +1,1314 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BFIN=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_UCLINUX=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_IRQCHIP_DEMUX_GPIO=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_LIMIT_PAGECACHE is not set
+CONFIG_BUDDY=y
+# CONFIG_NP2 is not set
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF531 is not set
+# CONFIG_BF532 is not set
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF535 is not set
+# CONFIG_BF536 is not set
+CONFIG_BF537=y
+# CONFIG_BF561 is not set
+CONFIG_BF_REV_0_2=y
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+# CONFIG_BF_REV_0_5 is not set
+CONFIG_BLACKFIN=y
+CONFIG_BFIN_SINGLE_CORE=y
+# CONFIG_BFIN533_EZKIT is not set
+# CONFIG_BFIN533_STAMP is not set
+CONFIG_BFIN537_STAMP=y
+# CONFIG_BFIN533_BLUETECHNIX_CM is not set
+# CONFIG_BFIN537_BLUETECHNIX_CM is not set
+# CONFIG_BFIN561_BLUETECHNIX_CM is not set
+# CONFIG_BFIN561_EZKIT is not set
+# CONFIG_PNAV10 is not set
+# CONFIG_GENERIC_BOARD is not set
+CONFIG_MEM_MT48LC32M8A2_75=y
+CONFIG_IRQ_PLL_WAKEUP=7
+
+#
+# BF537 Specific Configuration
+#
+
+#
+# PORT F/G Selection
+#
+CONFIG_BF537_PORT_F=y
+# CONFIG_BF537_PORT_G is not set
+# CONFIG_BF537_PORT_H is not set
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_DMA_ERROR=7
+CONFIG_IRQ_ERROR=7
+CONFIG_IRQ_RTC=8
+CONFIG_IRQ_PPI=8
+CONFIG_IRQ_SPORT0_RX=9
+CONFIG_IRQ_SPORT0_TX=9
+CONFIG_IRQ_SPORT1_RX=9
+CONFIG_IRQ_SPORT1_TX=9
+CONFIG_IRQ_TWI=10
+CONFIG_IRQ_SPI=10
+CONFIG_IRQ_UART0_RX=10
+CONFIG_IRQ_UART0_TX=10
+CONFIG_IRQ_UART1_RX=10
+CONFIG_IRQ_UART1_TX=10
+CONFIG_IRQ_CAN_RX=11
+CONFIG_IRQ_CAN_TX=11
+CONFIG_IRQ_MAC_RX=11
+CONFIG_IRQ_MAC_TX=11
+CONFIG_IRQ_TMR0=12
+CONFIG_IRQ_TMR1=12
+CONFIG_IRQ_TMR2=12
+CONFIG_IRQ_TMR3=12
+CONFIG_IRQ_TMR4=12
+CONFIG_IRQ_TMR5=12
+CONFIG_IRQ_TMR6=12
+CONFIG_IRQ_TMR7=12
+CONFIG_IRQ_PROG_INTA=12
+CONFIG_IRQ_PORTG_INTB=12
+CONFIG_IRQ_MEM_DMA0=13
+CONFIG_IRQ_MEM_DMA1=13
+CONFIG_IRQ_WATCH=13
+
+#
+# Board customizations
+#
+
+#
+# Board Setup
+#
+CONFIG_CLKIN_HZ=25000000
+CONFIG_MEM_SIZE=64
+CONFIG_MEM_ADD_WIDTH=10
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Console UART Setup
+#
+# CONFIG_BAUD_9600 is not set
+# CONFIG_BAUD_19200 is not set
+# CONFIG_BAUD_38400 is not set
+CONFIG_BAUD_57600=y
+# CONFIG_BAUD_115200 is not set
+CONFIG_BAUD_NO_PARITY=y
+# CONFIG_BAUD_PARITY is not set
+CONFIG_BAUD_1_STOPBIT=y
+# CONFIG_BAUD_2_STOPBIT is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Timer Tick
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_LARGE_ALLOCS=y
+CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BLKFIN_CACHE=y
+CONFIG_BLKFIN_DCACHE=y
+# CONFIG_BLKFIN_CACHE_LOCK is not set
+# CONFIG_BLKFIN_WB is not set
+CONFIG_BLKFIN_WT=y
+CONFIG_L1_MAX_PIECE=16
+
+#
+# Clock Settings
+#
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+
+#
+# Asynchonous Memory Configuration
+#
+
+#
+# EBIU_AMBCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x7BB0
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0x99B3
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
+# CONFIG_PM_WAKEUP_GPIO_API is not set
+CONFIG_PM_WAKEUP_SIC_IWR=0x80000000
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_MW320D=m
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_BF5xx=m
+CONFIG_BFIN_FLASH_SIZE=0x400000
+CONFIG_EBIU_FLASH_BASE=0x20000000
+
+#
+# FLASH_EBIU_AMBCTL Control
+#
+CONFIG_BFIN_FLASH_BANK_0=0x7BB0
+CONFIG_BFIN_FLASH_BANK_1=0x7BB0
+CONFIG_BFIN_FLASH_BANK_2=0x7BB0
+CONFIG_BFIN_FLASH_BANK_3=0x7BB0
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_BFIN=m
+CONFIG_BFIN_NAND_BASE=0x20212000
+CONFIG_BFIN_NAND_CLE=2
+CONFIG_BFIN_NAND_ALE=1
+CONFIG_BFIN_NAND_READY=3
+CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+CONFIG_BFIN_MAC=y
+CONFIG_BFIN_MAC_USE_L1=y
+CONFIG_BFIN_TX_DESC_NUM=10
+CONFIG_BFIN_RX_DESC_NUM=20
+# CONFIG_BFIN_MAC_RMII is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_BF53X_PFBUTTONS is not set
+CONFIG_TWI_KEYPAD=m
+CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_AD9960 is not set
+# CONFIG_SPI_ADC_BF533 is not set
+# CONFIG_BF533_PFLAGS is not set
+# CONFIG_BF5xx_PPIFCD is not set
+# CONFIG_BF5xx_TIMERS is not set
+# CONFIG_BF5xx_PPI is not set
+CONFIG_BFIN_SPORT=y
+# CONFIG_BFIN_TIMER_LATENCY is not set
+CONFIG_TWI_LCD=m
+CONFIG_TWI_LCD_SLAVE_ADDR=34
+# CONFIG_AD5304 is not set
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_BFIN_UART0_CTSRTS is not set
+# CONFIG_SERIAL_BFIN_UART1 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# CAN, the car bus and industrial fieldbus
+#
+CONFIG_CAN4LINUX=y
+
+#
+# linux embedded drivers
+#
+# CONFIG_CAN_MCF5282 is not set
+# CONFIG_CAN_UNCTWINCAN is not set
+CONFIG_CAN_BLACKFIN=m
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_GEN_RTC is not set
+CONFIG_BLACKFIN_DPMC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=m
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_BFIN_GPIO is not set
+CONFIG_I2C_BFIN_TWI=m
+CONFIG_TWICLK_KHZ=50
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_AD5252=m
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_BFIN=y
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB=m
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_BFIN_7171=m
+CONFIG_FB_BFIN_7393=m
+CONFIG_NTSC=y
+# CONFIG_PAL is not set
+# CONFIG_NTSC_640x480 is not set
+# CONFIG_PAL_640x480 is not set
+# CONFIG_NTSC_YCBCR is not set
+# CONFIG_PAL_YCBCR is not set
+CONFIG_ADV7393_1XMEM=y
+# CONFIG_ADV7393_2XMEM is not set
+CONFIG_FB_BF537_LQ035=m
+CONFIG_LQ035_SLAVE_ADDR=0x58
+# CONFIG_FB_BFIN_LANDSCAPE is not set
+# CONFIG_FB_BFIN_BGR is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_DEVICE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_SPI_MMC is not set
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+CONFIG_RTC_DRV_BFIN=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Virtualization
+#
+
+#
+# PBX support
+#
+# CONFIG_PBX is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+CONFIG_CPLB_INFO=y
+# CONFIG_NO_ACCESS_CHECK is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+CONFIG_SECURITY_CAPABILITIES=y
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
new file mode 100644
index 000000000000..f3b7d2f9d49c
--- /dev/null
+++ b/arch/blackfin/kernel/Makefile
@@ -0,0 +1,14 @@
+#
+# arch/blackfin/kernel/Makefile
+#
+
+extra-y := init_task.o vmlinux.lds
+
+obj-y := \
+ entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \
+ sys_bfin.o time.o traps.o irqchip.o dma-mapping.o bfin_gpio.o \
+ flat.o
+
+obj-$(CONFIG_MODULES) += module.o
+obj-$(CONFIG_BFIN_DMA_5XX) += bfin_dma_5xx.o
+obj-$(CONFIG_DUAL_CORE_TEST_MODULE) += dualcore_test.o
diff --git a/arch/blackfin/kernel/asm-offsets.c b/arch/blackfin/kernel/asm-offsets.c
new file mode 100644
index 000000000000..41d9a9f89700
--- /dev/null
+++ b/arch/blackfin/kernel/asm-offsets.c
@@ -0,0 +1,136 @@
+/*
+ * File: arch/blackfin/kernel/asm-offsets.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: generate definitions needed by assembly language modules.
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <linux/ptrace.h>
+#include <linux/hardirq.h>
+#include <asm/irq.h>
+#include <asm/thread_info.h>
+
+#define DEFINE(sym, val) \
+ asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+
+int main(void)
+{
+ /* offsets into the task struct */
+ DEFINE(TASK_STATE, offsetof(struct task_struct, state));
+ DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
+ DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
+ DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
+ DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
+ DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, thread_info));
+ DEFINE(TASK_MM, offsetof(struct task_struct, mm));
+ DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
+ DEFINE(TASK_SIGPENDING, offsetof(struct task_struct, pending));
+
+ /* offsets into the irq_cpustat_t struct */
+ DEFINE(CPUSTAT_SOFTIRQ_PENDING,
+ offsetof(irq_cpustat_t, __softirq_pending));
+
+ /* offsets into the thread struct */
+ DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
+ DEFINE(THREAD_USP, offsetof(struct thread_struct, usp));
+ DEFINE(THREAD_SR, offsetof(struct thread_struct, seqstat));
+ DEFINE(PT_SR, offsetof(struct thread_struct, seqstat));
+ DEFINE(THREAD_ESP0, offsetof(struct thread_struct, esp0));
+ DEFINE(THREAD_PC, offsetof(struct thread_struct, pc));
+ DEFINE(KERNEL_STACK_SIZE, THREAD_SIZE);
+
+ /* offsets into the pt_regs */
+ DEFINE(PT_ORIG_P0, offsetof(struct pt_regs, orig_p0));
+ DEFINE(PT_ORIG_PC, offsetof(struct pt_regs, orig_pc));
+ DEFINE(PT_R0, offsetof(struct pt_regs, r0));
+ DEFINE(PT_R1, offsetof(struct pt_regs, r1));
+ DEFINE(PT_R2, offsetof(struct pt_regs, r2));
+ DEFINE(PT_R3, offsetof(struct pt_regs, r3));
+ DEFINE(PT_R4, offsetof(struct pt_regs, r4));
+ DEFINE(PT_R5, offsetof(struct pt_regs, r5));
+ DEFINE(PT_R6, offsetof(struct pt_regs, r6));
+ DEFINE(PT_R7, offsetof(struct pt_regs, r7));
+
+ DEFINE(PT_P0, offsetof(struct pt_regs, p0));
+ DEFINE(PT_P1, offsetof(struct pt_regs, p1));
+ DEFINE(PT_P2, offsetof(struct pt_regs, p2));
+ DEFINE(PT_P3, offsetof(struct pt_regs, p3));
+ DEFINE(PT_P4, offsetof(struct pt_regs, p4));
+ DEFINE(PT_P5, offsetof(struct pt_regs, p5));
+
+ DEFINE(PT_FP, offsetof(struct pt_regs, fp));
+ DEFINE(PT_USP, offsetof(struct pt_regs, usp));
+ DEFINE(PT_I0, offsetof(struct pt_regs, i0));
+ DEFINE(PT_I1, offsetof(struct pt_regs, i1));
+ DEFINE(PT_I2, offsetof(struct pt_regs, i2));
+ DEFINE(PT_I3, offsetof(struct pt_regs, i3));
+ DEFINE(PT_M0, offsetof(struct pt_regs, m0));
+ DEFINE(PT_M1, offsetof(struct pt_regs, m1));
+ DEFINE(PT_M2, offsetof(struct pt_regs, m2));
+ DEFINE(PT_M3, offsetof(struct pt_regs, m3));
+ DEFINE(PT_L0, offsetof(struct pt_regs, l0));
+ DEFINE(PT_L1, offsetof(struct pt_regs, l1));
+ DEFINE(PT_L2, offsetof(struct pt_regs, l2));
+ DEFINE(PT_L3, offsetof(struct pt_regs, l3));
+ DEFINE(PT_B0, offsetof(struct pt_regs, b0));
+ DEFINE(PT_B1, offsetof(struct pt_regs, b1));
+ DEFINE(PT_B2, offsetof(struct pt_regs, b2));
+ DEFINE(PT_B3, offsetof(struct pt_regs, b3));
+ DEFINE(PT_A0X, offsetof(struct pt_regs, a0x));
+ DEFINE(PT_A0W, offsetof(struct pt_regs, a0w));
+ DEFINE(PT_A1X, offsetof(struct pt_regs, a1x));
+ DEFINE(PT_A1W, offsetof(struct pt_regs, a1w));
+ DEFINE(PT_LC0, offsetof(struct pt_regs, lc0));
+ DEFINE(PT_LC1, offsetof(struct pt_regs, lc1));
+ DEFINE(PT_LT0, offsetof(struct pt_regs, lt0));
+ DEFINE(PT_LT1, offsetof(struct pt_regs, lt1));
+ DEFINE(PT_LB0, offsetof(struct pt_regs, lb0));
+ DEFINE(PT_LB1, offsetof(struct pt_regs, lb1));
+ DEFINE(PT_ASTAT, offsetof(struct pt_regs, astat));
+ DEFINE(PT_RESERVED, offsetof(struct pt_regs, reserved));
+ DEFINE(PT_RETS, offsetof(struct pt_regs, rets));
+ DEFINE(PT_PC, offsetof(struct pt_regs, pc));
+ DEFINE(PT_RETX, offsetof(struct pt_regs, retx));
+ DEFINE(PT_RETN, offsetof(struct pt_regs, retn));
+ DEFINE(PT_RETE, offsetof(struct pt_regs, rete));
+ DEFINE(PT_SEQSTAT, offsetof(struct pt_regs, seqstat));
+ DEFINE(PT_SYSCFG, offsetof(struct pt_regs, syscfg));
+ DEFINE(PT_IPEND, offsetof(struct pt_regs, ipend));
+ DEFINE(SIZEOF_PTREGS, sizeof(struct pt_regs));
+ DEFINE(PT_TEXT_ADDR, sizeof(struct pt_regs)); /* Needed by gdb */
+ DEFINE(PT_TEXT_END_ADDR, 4 + sizeof(struct pt_regs));/* Needed by gdb */
+ DEFINE(PT_DATA_ADDR, 8 + sizeof(struct pt_regs)); /* Needed by gdb */
+ DEFINE(PT_FDPIC_EXEC, 12 + sizeof(struct pt_regs)); /* Needed by gdb */
+ DEFINE(PT_FDPIC_INTERP, 16 + sizeof(struct pt_regs));/* Needed by gdb */
+
+ /* signal defines */
+ DEFINE(SIGSEGV, SIGSEGV);
+ DEFINE(SIGTRAP, SIGTRAP);
+
+ return 0;
+}
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
new file mode 100644
index 000000000000..8ea079ebecb5
--- /dev/null
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -0,0 +1,742 @@
+/*
+ * File: arch/blackfin/kernel/bfin_dma_5xx.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: This file contains the simple DMA Implementation for Blackfin
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+
+#include <asm/dma.h>
+#include <asm/cacheflush.h>
+
+/* Remove unused code not exported by symbol or internally called */
+#define REMOVE_DEAD_CODE
+
+/**************************************************************************
+ * Global Variables
+***************************************************************************/
+
+static struct dma_channel dma_ch[MAX_BLACKFIN_DMA_CHANNEL];
+#if defined (CONFIG_BF561)
+static struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = {
+ (struct dma_register *) DMA1_0_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_1_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_2_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_3_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_4_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_5_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_6_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_7_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_8_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_9_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_10_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_11_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_0_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_1_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_2_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_3_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_4_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_5_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_6_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_7_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_8_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_9_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_10_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_11_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA1_D0_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA1_S0_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA1_D1_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA1_S1_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA2_D0_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA2_S0_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA2_D1_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA2_S1_NEXT_DESC_PTR,
+ (struct dma_register *) IMDMA_D0_NEXT_DESC_PTR,
+ (struct dma_register *) IMDMA_S0_NEXT_DESC_PTR,
+ (struct dma_register *) IMDMA_D1_NEXT_DESC_PTR,
+ (struct dma_register *) IMDMA_S1_NEXT_DESC_PTR,
+};
+#else
+static struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = {
+ (struct dma_register *) DMA0_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_NEXT_DESC_PTR,
+ (struct dma_register *) DMA3_NEXT_DESC_PTR,
+ (struct dma_register *) DMA4_NEXT_DESC_PTR,
+ (struct dma_register *) DMA5_NEXT_DESC_PTR,
+ (struct dma_register *) DMA6_NEXT_DESC_PTR,
+ (struct dma_register *) DMA7_NEXT_DESC_PTR,
+#if (defined(CONFIG_BF537) || defined(CONFIG_BF534) || defined(CONFIG_BF536))
+ (struct dma_register *) DMA8_NEXT_DESC_PTR,
+ (struct dma_register *) DMA9_NEXT_DESC_PTR,
+ (struct dma_register *) DMA10_NEXT_DESC_PTR,
+ (struct dma_register *) DMA11_NEXT_DESC_PTR,
+#endif
+ (struct dma_register *) MDMA_D0_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_S0_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_D1_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_S1_NEXT_DESC_PTR,
+};
+#endif
+
+/*------------------------------------------------------------------------------
+ * Set the Buffer Clear bit in the Configuration register of specific DMA
+ * channel. This will stop the descriptor based DMA operation.
+ *-----------------------------------------------------------------------------*/
+static void clear_dma_buffer(unsigned int channel)
+{
+ dma_ch[channel].regs->cfg |= RESTART;
+ SSYNC();
+ dma_ch[channel].regs->cfg &= ~RESTART;
+ SSYNC();
+}
+
+int __init blackfin_dma_init(void)
+{
+ int i;
+
+ printk(KERN_INFO "Blackfin DMA Controller\n");
+
+ for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++) {
+ dma_ch[i].chan_status = DMA_CHANNEL_FREE;
+ dma_ch[i].regs = base_addr[i];
+ mutex_init(&(dma_ch[i].dmalock));
+ }
+
+ return 0;
+}
+
+arch_initcall(blackfin_dma_init);
+
+/*
+ * Form the channel find the irq number for that channel.
+ */
+#if !defined(CONFIG_BF561)
+
+static int bf533_channel2irq(unsigned int channel)
+{
+ int ret_irq = -1;
+
+ switch (channel) {
+ case CH_PPI:
+ ret_irq = IRQ_PPI;
+ break;
+
+#if (defined(CONFIG_BF537) || defined(CONFIG_BF534) || defined(CONFIG_BF536))
+ case CH_EMAC_RX:
+ ret_irq = IRQ_MAC_RX;
+ break;
+
+ case CH_EMAC_TX:
+ ret_irq = IRQ_MAC_TX;
+ break;
+
+ case CH_UART1_RX:
+ ret_irq = IRQ_UART1_RX;
+ break;
+
+ case CH_UART1_TX:
+ ret_irq = IRQ_UART1_TX;
+ break;
+#endif
+
+ case CH_SPORT0_RX:
+ ret_irq = IRQ_SPORT0_RX;
+ break;
+
+ case CH_SPORT0_TX:
+ ret_irq = IRQ_SPORT0_TX;
+ break;
+
+ case CH_SPORT1_RX:
+ ret_irq = IRQ_SPORT1_RX;
+ break;
+
+ case CH_SPORT1_TX:
+ ret_irq = IRQ_SPORT1_TX;
+ break;
+
+ case CH_SPI:
+ ret_irq = IRQ_SPI;
+ break;
+
+ case CH_UART_RX:
+ ret_irq = IRQ_UART_RX;
+ break;
+
+ case CH_UART_TX:
+ ret_irq = IRQ_UART_TX;
+ break;
+
+ case CH_MEM_STREAM0_SRC:
+ case CH_MEM_STREAM0_DEST:
+ ret_irq = IRQ_MEM_DMA0;
+ break;
+
+ case CH_MEM_STREAM1_SRC:
+ case CH_MEM_STREAM1_DEST:
+ ret_irq = IRQ_MEM_DMA1;
+ break;
+ }
+ return ret_irq;
+}
+
+# define channel2irq(channel) bf533_channel2irq(channel)
+
+#else
+
+static int bf561_channel2irq(unsigned int channel)
+{
+ int ret_irq = -1;
+
+ switch (channel) {
+ case CH_PPI0:
+ ret_irq = IRQ_PPI0;
+ break;
+ case CH_PPI1:
+ ret_irq = IRQ_PPI1;
+ break;
+ case CH_SPORT0_RX:
+ ret_irq = IRQ_SPORT0_RX;
+ break;
+ case CH_SPORT0_TX:
+ ret_irq = IRQ_SPORT0_TX;
+ break;
+ case CH_SPORT1_RX:
+ ret_irq = IRQ_SPORT1_RX;
+ break;
+ case CH_SPORT1_TX:
+ ret_irq = IRQ_SPORT1_TX;
+ break;
+ case CH_SPI:
+ ret_irq = IRQ_SPI;
+ break;
+ case CH_UART_RX:
+ ret_irq = IRQ_UART_RX;
+ break;
+ case CH_UART_TX:
+ ret_irq = IRQ_UART_TX;
+ break;
+
+ case CH_MEM_STREAM0_SRC:
+ case CH_MEM_STREAM0_DEST:
+ ret_irq = IRQ_MEM_DMA0;
+ break;
+ case CH_MEM_STREAM1_SRC:
+ case CH_MEM_STREAM1_DEST:
+ ret_irq = IRQ_MEM_DMA1;
+ break;
+ case CH_MEM_STREAM2_SRC:
+ case CH_MEM_STREAM2_DEST:
+ ret_irq = IRQ_MEM_DMA2;
+ break;
+ case CH_MEM_STREAM3_SRC:
+ case CH_MEM_STREAM3_DEST:
+ ret_irq = IRQ_MEM_DMA3;
+ break;
+
+ case CH_IMEM_STREAM0_SRC:
+ case CH_IMEM_STREAM0_DEST:
+ ret_irq = IRQ_IMEM_DMA0;
+ break;
+ case CH_IMEM_STREAM1_SRC:
+ case CH_IMEM_STREAM1_DEST:
+ ret_irq = IRQ_IMEM_DMA1;
+ break;
+ }
+ return ret_irq;
+}
+
+# define channel2irq(channel) bf561_channel2irq(channel)
+
+#endif
+
+/*------------------------------------------------------------------------------
+ * Request the specific DMA channel from the system.
+ *-----------------------------------------------------------------------------*/
+int request_dma(unsigned int channel, char *device_id)
+{
+
+ pr_debug("request_dma() : BEGIN \n");
+ mutex_lock(&(dma_ch[channel].dmalock));
+
+ if ((dma_ch[channel].chan_status == DMA_CHANNEL_REQUESTED)
+ || (dma_ch[channel].chan_status == DMA_CHANNEL_ENABLED)) {
+ mutex_unlock(&(dma_ch[channel].dmalock));
+ pr_debug("DMA CHANNEL IN USE \n");
+ return -EBUSY;
+ } else {
+ dma_ch[channel].chan_status = DMA_CHANNEL_REQUESTED;
+ pr_debug("DMA CHANNEL IS ALLOCATED \n");
+ }
+
+ mutex_unlock(&(dma_ch[channel].dmalock));
+
+ dma_ch[channel].device_id = device_id;
+ dma_ch[channel].irq_callback = NULL;
+
+ /* This is to be enabled by putting a restriction -
+ * you have to request DMA, before doing any operations on
+ * descriptor/channel
+ */
+ pr_debug("request_dma() : END \n");
+ return channel;
+}
+EXPORT_SYMBOL(request_dma);
+
+int set_dma_callback(unsigned int channel, dma_interrupt_t callback, void *data)
+{
+ int ret_irq = 0;
+
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ if (callback != NULL) {
+ int ret_val;
+ ret_irq = channel2irq(channel);
+
+ dma_ch[channel].data = data;
+
+ ret_val =
+ request_irq(ret_irq, (void *)callback, IRQF_DISABLED,
+ dma_ch[channel].device_id, data);
+ if (ret_val) {
+ printk(KERN_NOTICE
+ "Request irq in DMA engine failed.\n");
+ return -EPERM;
+ }
+ dma_ch[channel].irq_callback = callback;
+ }
+ return 0;
+}
+EXPORT_SYMBOL(set_dma_callback);
+
+void free_dma(unsigned int channel)
+{
+ int ret_irq;
+
+ pr_debug("freedma() : BEGIN \n");
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ /* Halt the DMA */
+ disable_dma(channel);
+ clear_dma_buffer(channel);
+
+ if (dma_ch[channel].irq_callback != NULL) {
+ ret_irq = channel2irq(channel);
+ free_irq(ret_irq, dma_ch[channel].data);
+ }
+
+ /* Clear the DMA Variable in the Channel */
+ mutex_lock(&(dma_ch[channel].dmalock));
+ dma_ch[channel].chan_status = DMA_CHANNEL_FREE;
+ mutex_unlock(&(dma_ch[channel].dmalock));
+
+ pr_debug("freedma() : END \n");
+}
+EXPORT_SYMBOL(free_dma);
+
+void dma_enable_irq(unsigned int channel)
+{
+ int ret_irq;
+
+ pr_debug("dma_enable_irq() : BEGIN \n");
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ ret_irq = channel2irq(channel);
+ enable_irq(ret_irq);
+}
+EXPORT_SYMBOL(dma_enable_irq);
+
+void dma_disable_irq(unsigned int channel)
+{
+ int ret_irq;
+
+ pr_debug("dma_disable_irq() : BEGIN \n");
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ ret_irq = channel2irq(channel);
+ disable_irq(ret_irq);
+}
+EXPORT_SYMBOL(dma_disable_irq);
+
+int dma_channel_active(unsigned int channel)
+{
+ if (dma_ch[channel].chan_status == DMA_CHANNEL_FREE) {
+ return 0;
+ } else {
+ return 1;
+ }
+}
+EXPORT_SYMBOL(dma_channel_active);
+
+/*------------------------------------------------------------------------------
+* stop the specific DMA channel.
+*-----------------------------------------------------------------------------*/
+void disable_dma(unsigned int channel)
+{
+ pr_debug("stop_dma() : BEGIN \n");
+
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ dma_ch[channel].regs->cfg &= ~DMAEN; /* Clean the enable bit */
+ SSYNC();
+ dma_ch[channel].chan_status = DMA_CHANNEL_REQUESTED;
+ /* Needs to be enabled Later */
+ pr_debug("stop_dma() : END \n");
+ return;
+}
+EXPORT_SYMBOL(disable_dma);
+
+void enable_dma(unsigned int channel)
+{
+ pr_debug("enable_dma() : BEGIN \n");
+
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ dma_ch[channel].chan_status = DMA_CHANNEL_ENABLED;
+ dma_ch[channel].regs->curr_x_count = 0;
+ dma_ch[channel].regs->curr_y_count = 0;
+
+ dma_ch[channel].regs->cfg |= DMAEN; /* Set the enable bit */
+ SSYNC();
+ pr_debug("enable_dma() : END \n");
+ return;
+}
+EXPORT_SYMBOL(enable_dma);
+
+/*------------------------------------------------------------------------------
+* Set the Start Address register for the specific DMA channel
+* This function can be used for register based DMA,
+* to setup the start address
+* addr: Starting address of the DMA Data to be transferred.
+*-----------------------------------------------------------------------------*/
+void set_dma_start_addr(unsigned int channel, unsigned long addr)
+{
+ pr_debug("set_dma_start_addr() : BEGIN \n");
+
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ dma_ch[channel].regs->start_addr = addr;
+ SSYNC();
+ pr_debug("set_dma_start_addr() : END\n");
+}
+EXPORT_SYMBOL(set_dma_start_addr);
+
+void set_dma_next_desc_addr(unsigned int channel, unsigned long addr)
+{
+ pr_debug("set_dma_next_desc_addr() : BEGIN \n");
+
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ dma_ch[channel].regs->next_desc_ptr = addr;
+ SSYNC();
+ pr_debug("set_dma_start_addr() : END\n");
+}
+EXPORT_SYMBOL(set_dma_next_desc_addr);
+
+void set_dma_x_count(unsigned int channel, unsigned short x_count)
+{
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ dma_ch[channel].regs->x_count = x_count;
+ SSYNC();
+}
+EXPORT_SYMBOL(set_dma_x_count);
+
+void set_dma_y_count(unsigned int channel, unsigned short y_count)
+{
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ dma_ch[channel].regs->y_count = y_count;
+ SSYNC();
+}
+EXPORT_SYMBOL(set_dma_y_count);
+
+void set_dma_x_modify(unsigned int channel, short x_modify)
+{
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ dma_ch[channel].regs->x_modify = x_modify;
+ SSYNC();
+}
+EXPORT_SYMBOL(set_dma_x_modify);
+
+void set_dma_y_modify(unsigned int channel, short y_modify)
+{
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ dma_ch[channel].regs->y_modify = y_modify;
+ SSYNC();
+}
+EXPORT_SYMBOL(set_dma_y_modify);
+
+void set_dma_config(unsigned int channel, unsigned short config)
+{
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ dma_ch[channel].regs->cfg = config;
+ SSYNC();
+}
+EXPORT_SYMBOL(set_dma_config);
+
+unsigned short
+set_bfin_dma_config(char direction, char flow_mode,
+ char intr_mode, char dma_mode, char width)
+{
+ unsigned short config;
+
+ config =
+ ((direction << 1) | (width << 2) | (dma_mode << 4) |
+ (intr_mode << 6) | (flow_mode << 12) | RESTART);
+ return config;
+}
+EXPORT_SYMBOL(set_bfin_dma_config);
+
+void set_dma_sg(unsigned int channel, struct dmasg * sg, int nr_sg)
+{
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ dma_ch[channel].regs->cfg |= ((nr_sg & 0x0F) << 8);
+
+ dma_ch[channel].regs->next_desc_ptr = (unsigned int)sg;
+
+ SSYNC();
+}
+EXPORT_SYMBOL(set_dma_sg);
+
+/*------------------------------------------------------------------------------
+ * Get the DMA status of a specific DMA channel from the system.
+ *-----------------------------------------------------------------------------*/
+unsigned short get_dma_curr_irqstat(unsigned int channel)
+{
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ return dma_ch[channel].regs->irq_status;
+}
+EXPORT_SYMBOL(get_dma_curr_irqstat);
+
+/*------------------------------------------------------------------------------
+ * Clear the DMA_DONE bit in DMA status. Stop the DMA completion interrupt.
+ *-----------------------------------------------------------------------------*/
+void clear_dma_irqstat(unsigned int channel)
+{
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+ dma_ch[channel].regs->irq_status |= 3;
+}
+EXPORT_SYMBOL(clear_dma_irqstat);
+
+/*------------------------------------------------------------------------------
+ * Get current DMA xcount of a specific DMA channel from the system.
+ *-----------------------------------------------------------------------------*/
+unsigned short get_dma_curr_xcount(unsigned int channel)
+{
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ return dma_ch[channel].regs->curr_x_count;
+}
+EXPORT_SYMBOL(get_dma_curr_xcount);
+
+/*------------------------------------------------------------------------------
+ * Get current DMA ycount of a specific DMA channel from the system.
+ *-----------------------------------------------------------------------------*/
+unsigned short get_dma_curr_ycount(unsigned int channel)
+{
+ BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
+ && channel < MAX_BLACKFIN_DMA_CHANNEL));
+
+ return dma_ch[channel].regs->curr_y_count;
+}
+EXPORT_SYMBOL(get_dma_curr_ycount);
+
+void *dma_memcpy(void *dest, const void *src, size_t size)
+{
+ int direction; /* 1 - address decrease, 0 - address increase */
+ int flag_align; /* 1 - address aligned, 0 - address unaligned */
+ int flag_2D; /* 1 - 2D DMA needed, 0 - 1D DMA needed */
+
+ if (size <= 0)
+ return NULL;
+
+ if ((unsigned long)src < memory_end)
+ blackfin_dcache_flush_range((unsigned int)src,
+ (unsigned int)(src + size));
+
+ bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
+
+ if ((unsigned long)src < (unsigned long)dest)
+ direction = 1;
+ else
+ direction = 0;
+
+ if ((((unsigned long)dest % 2) == 0) && (((unsigned long)src % 2) == 0)
+ && ((size % 2) == 0))
+ flag_align = 1;
+ else
+ flag_align = 0;
+
+ if (size > 0x10000) /* size > 64K */
+ flag_2D = 1;
+ else
+ flag_2D = 0;
+
+ /* Setup destination and source start address */
+ if (direction) {
+ if (flag_align) {
+ bfin_write_MDMA_D0_START_ADDR(dest + size - 2);
+ bfin_write_MDMA_S0_START_ADDR(src + size - 2);
+ } else {
+ bfin_write_MDMA_D0_START_ADDR(dest + size - 1);
+ bfin_write_MDMA_S0_START_ADDR(src + size - 1);
+ }
+ } else {
+ bfin_write_MDMA_D0_START_ADDR(dest);
+ bfin_write_MDMA_S0_START_ADDR(src);
+ }
+
+ /* Setup destination and source xcount */
+ if (flag_2D) {
+ if (flag_align) {
+ bfin_write_MDMA_D0_X_COUNT(1024 / 2);
+ bfin_write_MDMA_S0_X_COUNT(1024 / 2);
+ } else {
+ bfin_write_MDMA_D0_X_COUNT(1024);
+ bfin_write_MDMA_S0_X_COUNT(1024);
+ }
+ bfin_write_MDMA_D0_Y_COUNT(size >> 10);
+ bfin_write_MDMA_S0_Y_COUNT(size >> 10);
+ } else {
+ if (flag_align) {
+ bfin_write_MDMA_D0_X_COUNT(size / 2);
+ bfin_write_MDMA_S0_X_COUNT(size / 2);
+ } else {
+ bfin_write_MDMA_D0_X_COUNT(size);
+ bfin_write_MDMA_S0_X_COUNT(size);
+ }
+ }
+
+ /* Setup destination and source xmodify and ymodify */
+ if (direction) {
+ if (flag_align) {
+ bfin_write_MDMA_D0_X_MODIFY(-2);
+ bfin_write_MDMA_S0_X_MODIFY(-2);
+ if (flag_2D) {
+ bfin_write_MDMA_D0_Y_MODIFY(-2);
+ bfin_write_MDMA_S0_Y_MODIFY(-2);
+ }
+ } else {
+ bfin_write_MDMA_D0_X_MODIFY(-1);
+ bfin_write_MDMA_S0_X_MODIFY(-1);
+ if (flag_2D) {
+ bfin_write_MDMA_D0_Y_MODIFY(-1);
+ bfin_write_MDMA_S0_Y_MODIFY(-1);
+ }
+ }
+ } else {
+ if (flag_align) {
+ bfin_write_MDMA_D0_X_MODIFY(2);
+ bfin_write_MDMA_S0_X_MODIFY(2);
+ if (flag_2D) {
+ bfin_write_MDMA_D0_Y_MODIFY(2);
+ bfin_write_MDMA_S0_Y_MODIFY(2);
+ }
+ } else {
+ bfin_write_MDMA_D0_X_MODIFY(1);
+ bfin_write_MDMA_S0_X_MODIFY(1);
+ if (flag_2D) {
+ bfin_write_MDMA_D0_Y_MODIFY(1);
+ bfin_write_MDMA_S0_Y_MODIFY(1);
+ }
+ }
+ }
+
+ /* Enable source DMA */
+ if (flag_2D) {
+ if (flag_align) {
+ bfin_write_MDMA_S0_CONFIG(DMAEN | DMA2D | WDSIZE_16);
+ bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | DMA2D | WDSIZE_16);
+ } else {
+ bfin_write_MDMA_S0_CONFIG(DMAEN | DMA2D);
+ bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | DMA2D);
+ }
+ } else {
+ if (flag_align) {
+ bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16);
+ bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_16);
+ } else {
+ bfin_write_MDMA_S0_CONFIG(DMAEN);
+ bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN);
+ }
+ }
+
+ while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE))
+ ;
+
+ bfin_write_MDMA_D0_IRQ_STATUS(bfin_read_MDMA_D0_IRQ_STATUS() |
+ (DMA_DONE | DMA_ERR));
+
+ bfin_write_MDMA_S0_CONFIG(0);
+ bfin_write_MDMA_D0_CONFIG(0);
+
+ if ((unsigned long)dest < memory_end)
+ blackfin_dcache_invalidate_range((unsigned int)dest,
+ (unsigned int)(dest + size));
+
+ return dest;
+}
+EXPORT_SYMBOL(dma_memcpy);
+
+void *safe_dma_memcpy(void *dest, const void *src, size_t size)
+{
+ int flags = 0;
+ void *addr;
+ local_irq_save(flags);
+ addr = dma_memcpy(dest, src, size);
+ local_irq_restore(flags);
+ return addr;
+}
+EXPORT_SYMBOL(safe_dma_memcpy);
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
new file mode 100644
index 000000000000..e9f24a9a46ba
--- /dev/null
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -0,0 +1,637 @@
+/*
+ * File: arch/blackfin/kernel/bfin_gpio.c
+ * Based on:
+ * Author: Michael Hennerich (hennerich@blackfin.uclinux.org)
+ *
+ * Created:
+ * Description: GPIO Abstraction Layer
+ *
+ * Modified:
+ * Copyright 2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+* Number BF537/6/4 BF561 BF533/2/1
+*
+* GPIO_0 PF0 PF0 PF0
+* GPIO_1 PF1 PF1 PF1
+* GPIO_2 PF2 PF2 PF2
+* GPIO_3 PF3 PF3 PF3
+* GPIO_4 PF4 PF4 PF4
+* GPIO_5 PF5 PF5 PF5
+* GPIO_6 PF6 PF6 PF6
+* GPIO_7 PF7 PF7 PF7
+* GPIO_8 PF8 PF8 PF8
+* GPIO_9 PF9 PF9 PF9
+* GPIO_10 PF10 PF10 PF10
+* GPIO_11 PF11 PF11 PF11
+* GPIO_12 PF12 PF12 PF12
+* GPIO_13 PF13 PF13 PF13
+* GPIO_14 PF14 PF14 PF14
+* GPIO_15 PF15 PF15 PF15
+* GPIO_16 PG0 PF16
+* GPIO_17 PG1 PF17
+* GPIO_18 PG2 PF18
+* GPIO_19 PG3 PF19
+* GPIO_20 PG4 PF20
+* GPIO_21 PG5 PF21
+* GPIO_22 PG6 PF22
+* GPIO_23 PG7 PF23
+* GPIO_24 PG8 PF24
+* GPIO_25 PG9 PF25
+* GPIO_26 PG10 PF26
+* GPIO_27 PG11 PF27
+* GPIO_28 PG12 PF28
+* GPIO_29 PG13 PF29
+* GPIO_30 PG14 PF30
+* GPIO_31 PG15 PF31
+* GPIO_32 PH0 PF32
+* GPIO_33 PH1 PF33
+* GPIO_34 PH2 PF34
+* GPIO_35 PH3 PF35
+* GPIO_36 PH4 PF36
+* GPIO_37 PH5 PF37
+* GPIO_38 PH6 PF38
+* GPIO_39 PH7 PF39
+* GPIO_40 PH8 PF40
+* GPIO_41 PH9 PF41
+* GPIO_42 PH10 PF42
+* GPIO_43 PH11 PF43
+* GPIO_44 PH12 PF44
+* GPIO_45 PH13 PF45
+* GPIO_46 PH14 PF46
+* GPIO_47 PH15 PF47
+*/
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <asm/blackfin.h>
+#include <asm/gpio.h>
+#include <linux/irq.h>
+
+#ifdef BF533_FAMILY
+static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
+ (struct gpio_port_t *) FIO_FLAG_D,
+};
+#endif
+
+#ifdef BF537_FAMILY
+static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
+ (struct gpio_port_t *) PORTFIO,
+ (struct gpio_port_t *) PORTGIO,
+ (struct gpio_port_t *) PORTHIO,
+};
+
+static unsigned short *port_fer[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
+ (unsigned short *) PORTF_FER,
+ (unsigned short *) PORTG_FER,
+ (unsigned short *) PORTH_FER,
+};
+
+#endif
+
+#ifdef BF561_FAMILY
+static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
+ (struct gpio_port_t *) FIO0_FLAG_D,
+ (struct gpio_port_t *) FIO1_FLAG_D,
+ (struct gpio_port_t *) FIO2_FLAG_D,
+};
+#endif
+
+static unsigned short reserved_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
+
+#ifdef CONFIG_PM
+static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
+static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
+static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)];
+
+#ifdef BF533_FAMILY
+static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG_INTB};
+#endif
+
+#ifdef BF537_FAMILY
+static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX};
+#endif
+
+#ifdef BF561_FAMILY
+static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB};
+#endif
+
+#endif /* CONFIG_PM */
+
+inline int check_gpio(unsigned short gpio)
+{
+ if (gpio > MAX_BLACKFIN_GPIOS)
+ return -EINVAL;
+ return 0;
+}
+
+#ifdef BF537_FAMILY
+void port_setup(unsigned short gpio, unsigned short usage)
+{
+ if (usage == GPIO_USAGE) {
+ if (*port_fer[gpio_bank(gpio)] & gpio_bit(gpio))
+ printk(KERN_WARNING "bfin-gpio: Possible Conflict with Peripheral "
+ "usage and GPIO %d detected!\n", gpio);
+ *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+ } else
+ *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
+ SSYNC();
+}
+#else
+# define port_setup(...) do { } while (0)
+#endif
+
+
+void default_gpio(unsigned short gpio)
+{
+ unsigned short bank,bitmask;
+
+ bank = gpio_bank(gpio);
+ bitmask = gpio_bit(gpio);
+
+ gpio_bankb[bank]->maska_clear = bitmask;
+ gpio_bankb[bank]->maskb_clear = bitmask;
+ SSYNC();
+ gpio_bankb[bank]->inen &= ~bitmask;
+ gpio_bankb[bank]->dir &= ~bitmask;
+ gpio_bankb[bank]->polar &= ~bitmask;
+ gpio_bankb[bank]->both &= ~bitmask;
+ gpio_bankb[bank]->edge &= ~bitmask;
+}
+
+
+int __init bfin_gpio_init(void)
+{
+ int i;
+
+ printk(KERN_INFO "Blackfin GPIO Controller\n");
+
+ for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=GPIO_BANKSIZE)
+ reserved_map[gpio_bank(i)] = 0;
+
+#if defined(BF537_FAMILY) && (defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
+# if defined(CONFIG_BFIN_MAC_RMII)
+ reserved_map[PORT_H] = 0xC373;
+# else
+ reserved_map[PORT_H] = 0xFFFF;
+# endif
+#endif
+
+ return 0;
+}
+
+arch_initcall(bfin_gpio_init);
+
+
+/***********************************************************
+*
+* FUNCTIONS: Blackfin General Purpose Ports Access Functions
+*
+* INPUTS/OUTPUTS:
+* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
+*
+*
+* DESCRIPTION: These functions abstract direct register access
+* to Blackfin processor General Purpose
+* Ports Regsiters
+*
+* CAUTION: These functions do not belong to the GPIO Driver API
+*************************************************************
+* MODIFICATION HISTORY :
+**************************************************************/
+
+/* Set a specific bit */
+
+#define SET_GPIO(name) \
+void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
+{ \
+ unsigned long flags; \
+ BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
+ local_irq_save(flags); \
+ if (arg) \
+ gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
+ else \
+ gpio_bankb[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \
+ local_irq_restore(flags); \
+} \
+EXPORT_SYMBOL(set_gpio_ ## name);
+
+SET_GPIO(dir)
+SET_GPIO(inen)
+SET_GPIO(polar)
+SET_GPIO(edge)
+SET_GPIO(both)
+
+
+#define SET_GPIO_SC(name) \
+void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \
+{ \
+ BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))); \
+ if (arg) \
+ gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
+ else \
+ gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
+} \
+EXPORT_SYMBOL(set_gpio_ ## name);
+
+SET_GPIO_SC(maska)
+SET_GPIO_SC(maskb)
+
+#if defined(ANOMALY_05000311)
+void set_gpio_data(unsigned short gpio, unsigned short arg)
+{
+ unsigned long flags;
+ BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ local_irq_save(flags);
+ if (arg)
+ gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
+ else
+ gpio_bankb[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
+ bfin_read_CHIPID();
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(set_gpio_data);
+#else
+SET_GPIO_SC(data)
+#endif
+
+
+#if defined(ANOMALY_05000311)
+void set_gpio_toggle(unsigned short gpio)
+{
+ unsigned long flags;
+ BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ local_irq_save(flags);
+ gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
+ bfin_read_CHIPID();
+ local_irq_restore(flags);
+}
+#else
+void set_gpio_toggle(unsigned short gpio)
+{
+ BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
+}
+#endif
+EXPORT_SYMBOL(set_gpio_toggle);
+
+
+/*Set current PORT date (16-bit word)*/
+
+#define SET_GPIO_P(name) \
+void set_gpiop_ ## name(unsigned short gpio, unsigned short arg) \
+{ \
+ gpio_bankb[gpio_bank(gpio)]->name = arg; \
+} \
+EXPORT_SYMBOL(set_gpiop_ ## name);
+
+SET_GPIO_P(dir)
+SET_GPIO_P(inen)
+SET_GPIO_P(polar)
+SET_GPIO_P(edge)
+SET_GPIO_P(both)
+SET_GPIO_P(maska)
+SET_GPIO_P(maskb)
+
+
+#if defined(ANOMALY_05000311)
+void set_gpiop_data(unsigned short gpio, unsigned short arg)
+{
+ unsigned long flags;
+ local_irq_save(flags);
+ gpio_bankb[gpio_bank(gpio)]->data = arg;
+ bfin_read_CHIPID();
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(set_gpiop_data);
+#else
+SET_GPIO_P(data)
+#endif
+
+
+
+/* Get a specific bit */
+
+#define GET_GPIO(name) \
+unsigned short get_gpio_ ## name(unsigned short gpio) \
+{ \
+ return (0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio))); \
+} \
+EXPORT_SYMBOL(get_gpio_ ## name);
+
+GET_GPIO(dir)
+GET_GPIO(inen)
+GET_GPIO(polar)
+GET_GPIO(edge)
+GET_GPIO(both)
+GET_GPIO(maska)
+GET_GPIO(maskb)
+
+
+#if defined(ANOMALY_05000311)
+unsigned short get_gpio_data(unsigned short gpio)
+{
+ unsigned long flags;
+ unsigned short ret;
+ BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+ local_irq_save(flags);
+ ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->data >> gpio_sub_n(gpio));
+ bfin_read_CHIPID();
+ local_irq_restore(flags);
+ return ret;
+}
+EXPORT_SYMBOL(get_gpio_data);
+#else
+GET_GPIO(data)
+#endif
+
+/*Get current PORT date (16-bit word)*/
+
+#define GET_GPIO_P(name) \
+unsigned short get_gpiop_ ## name(unsigned short gpio) \
+{ \
+ return (gpio_bankb[gpio_bank(gpio)]->name);\
+} \
+EXPORT_SYMBOL(get_gpiop_ ## name);
+
+GET_GPIO_P(dir)
+GET_GPIO_P(inen)
+GET_GPIO_P(polar)
+GET_GPIO_P(edge)
+GET_GPIO_P(both)
+GET_GPIO_P(maska)
+GET_GPIO_P(maskb)
+
+#if defined(ANOMALY_05000311)
+unsigned short get_gpiop_data(unsigned short gpio)
+{
+ unsigned long flags;
+ unsigned short ret;
+ local_irq_save(flags);
+ ret = gpio_bankb[gpio_bank(gpio)]->data;
+ bfin_read_CHIPID();
+ local_irq_restore(flags);
+ return ret;
+}
+EXPORT_SYMBOL(get_gpiop_data);
+#else
+GET_GPIO_P(data)
+#endif
+
+#ifdef CONFIG_PM
+/***********************************************************
+*
+* FUNCTIONS: Blackfin PM Setup API
+*
+* INPUTS/OUTPUTS:
+* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
+* type -
+* PM_WAKE_RISING
+* PM_WAKE_FALLING
+* PM_WAKE_HIGH
+* PM_WAKE_LOW
+* PM_WAKE_BOTH_EDGES
+*
+* DESCRIPTION: Blackfin PM Driver API
+*
+* CAUTION:
+*************************************************************
+* MODIFICATION HISTORY :
+**************************************************************/
+int gpio_pm_wakeup_request(unsigned short gpio, unsigned char type)
+{
+ unsigned long flags;
+
+ if ((check_gpio(gpio) < 0) || !type)
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ wakeup_map[gpio_bank(gpio)] |= gpio_bit(gpio);
+ wakeup_flags_map[gpio] = type;
+ local_irq_restore(flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(gpio_pm_wakeup_request);
+
+void gpio_pm_wakeup_free(unsigned short gpio)
+{
+ unsigned long flags;
+
+ if (check_gpio(gpio) < 0)
+ return;
+
+ local_irq_save(flags);
+
+ wakeup_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_pm_wakeup_free);
+
+static int bfin_gpio_wakeup_type(unsigned short gpio, unsigned char type)
+{
+ port_setup(gpio, GPIO_USAGE);
+ set_gpio_dir(gpio, 0);
+ set_gpio_inen(gpio, 1);
+
+ if (type & (PM_WAKE_RISING | PM_WAKE_FALLING))
+ set_gpio_edge(gpio, 1);
+ else
+ set_gpio_edge(gpio, 0);
+
+ if ((type & (PM_WAKE_BOTH_EDGES)) == (PM_WAKE_BOTH_EDGES))
+ set_gpio_both(gpio, 1);
+ else
+ set_gpio_both(gpio, 0);
+
+ if ((type & (PM_WAKE_FALLING | PM_WAKE_LOW)))
+ set_gpio_polar(gpio, 1);
+ else
+ set_gpio_polar(gpio, 0);
+
+ SSYNC();
+
+ return 0;
+}
+
+u32 gpio_pm_setup(void)
+{
+ u32 sic_iwr = 0;
+ u16 bank, mask, i, gpio;
+
+ for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=GPIO_BANKSIZE) {
+ mask = wakeup_map[gpio_bank(i)];
+ bank = gpio_bank(i);
+
+ gpio_bank_saved[bank].maskb = gpio_bankb[bank]->maskb;
+ gpio_bankb[bank]->maskb = 0;
+
+ if (mask) {
+#ifdef BF537_FAMILY
+ gpio_bank_saved[bank].fer = *port_fer[bank];
+#endif
+ gpio_bank_saved[bank].inen = gpio_bankb[bank]->inen;
+ gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar;
+ gpio_bank_saved[bank].dir = gpio_bankb[bank]->dir;
+ gpio_bank_saved[bank].edge = gpio_bankb[bank]->edge;
+ gpio_bank_saved[bank].both = gpio_bankb[bank]->both;
+
+ gpio = i;
+
+ while (mask) {
+ if (mask & 1) {
+ bfin_gpio_wakeup_type(gpio, wakeup_flags_map[gpio]);
+ set_gpio_data(gpio, 0); /*Clear*/
+ }
+ gpio++;
+ mask >>= 1;
+ }
+
+ sic_iwr |= 1 << (sic_iwr_irqs[bank] - (IRQ_CORETMR + 1));
+ gpio_bankb[bank]->maskb_set = wakeup_map[gpio_bank(i)];
+ }
+ }
+
+ if (sic_iwr)
+ return sic_iwr;
+ else
+ return IWR_ENABLE_ALL;
+}
+
+
+void gpio_pm_restore(void)
+{
+ u16 bank, mask, i;
+
+ for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=GPIO_BANKSIZE) {
+ mask = wakeup_map[gpio_bank(i)];
+ bank = gpio_bank(i);
+
+ if (mask) {
+#ifdef BF537_FAMILY
+ *port_fer[bank] = gpio_bank_saved[bank].fer;
+#endif
+ gpio_bankb[bank]->inen = gpio_bank_saved[bank].inen;
+ gpio_bankb[bank]->dir = gpio_bank_saved[bank].dir;
+ gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar;
+ gpio_bankb[bank]->edge = gpio_bank_saved[bank].edge;
+ gpio_bankb[bank]->both = gpio_bank_saved[bank].both;
+ }
+
+ gpio_bankb[bank]->maskb = gpio_bank_saved[bank].maskb;
+ }
+}
+
+#endif
+
+/***********************************************************
+*
+* FUNCTIONS: Blackfin GPIO Driver
+*
+* INPUTS/OUTPUTS:
+* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
+*
+*
+* DESCRIPTION: Blackfin GPIO Driver API
+*
+* CAUTION:
+*************************************************************
+* MODIFICATION HISTORY :
+**************************************************************/
+
+int gpio_request(unsigned short gpio, const char *label)
+{
+ unsigned long flags;
+
+ if (check_gpio(gpio) < 0)
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ if (unlikely(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+ printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved!\n", gpio);
+ dump_stack();
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+ reserved_map[gpio_bank(gpio)] |= gpio_bit(gpio);
+
+ local_irq_restore(flags);
+
+ port_setup(gpio, GPIO_USAGE);
+
+ return 0;
+}
+EXPORT_SYMBOL(gpio_request);
+
+
+void gpio_free(unsigned short gpio)
+{
+ unsigned long flags;
+
+ if (check_gpio(gpio) < 0)
+ return;
+
+ local_irq_save(flags);
+
+ if (unlikely(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
+ printk(KERN_ERR "bfin-gpio: GPIO %d wasn't reserved!\n", gpio);
+ dump_stack();
+ local_irq_restore(flags);
+ return;
+ }
+
+ default_gpio(gpio);
+
+ reserved_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_free);
+
+
+void gpio_direction_input(unsigned short gpio)
+{
+ unsigned long flags;
+
+ BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+
+ local_irq_save(flags);
+ gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
+ gpio_bankb[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+void gpio_direction_output(unsigned short gpio)
+{
+ unsigned long flags;
+
+ BUG_ON(!(reserved_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+
+ local_irq_save(flags);
+ gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
+ gpio_bankb[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_direction_output);
diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c
new file mode 100644
index 000000000000..f64ecb638fab
--- /dev/null
+++ b/arch/blackfin/kernel/bfin_ksyms.c
@@ -0,0 +1,119 @@
+/*
+ * File: arch/blackfin/kernel/bfin_ksyms.c
+ * Based on: none - original work
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <asm/irq.h>
+#include <asm/checksum.h>
+#include <asm/cacheflush.h>
+#include <asm/uaccess.h>
+
+/* platform dependent support */
+
+EXPORT_SYMBOL(__ioremap);
+EXPORT_SYMBOL(strcmp);
+EXPORT_SYMBOL(strncmp);
+EXPORT_SYMBOL(dump_thread);
+
+EXPORT_SYMBOL(ip_fast_csum);
+
+EXPORT_SYMBOL(kernel_thread);
+
+EXPORT_SYMBOL(__up);
+EXPORT_SYMBOL(__down);
+EXPORT_SYMBOL(__down_trylock);
+EXPORT_SYMBOL(__down_interruptible);
+
+EXPORT_SYMBOL(is_in_rom);
+
+/* Networking helper routines. */
+EXPORT_SYMBOL(csum_partial_copy);
+
+/* The following are special because they're not called
+ * explicitly (the C compiler generates them). Fortunately,
+ * their interface isn't gonna change any time soon now, so
+ * it's OK to leave it out of version control.
+ */
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memset);
+EXPORT_SYMBOL(memcmp);
+EXPORT_SYMBOL(memmove);
+EXPORT_SYMBOL(memchr);
+EXPORT_SYMBOL(get_wchan);
+
+/*
+ * libgcc functions - functions that are used internally by the
+ * compiler... (prototypes are not correct though, but that
+ * doesn't really matter since they're not versioned).
+ */
+extern void __ashldi3(void);
+extern void __ashrdi3(void);
+extern void __smulsi3_highpart(void);
+extern void __umulsi3_highpart(void);
+extern void __divsi3(void);
+extern void __lshrdi3(void);
+extern void __modsi3(void);
+extern void __muldi3(void);
+extern void __udivsi3(void);
+extern void __umodsi3(void);
+
+/* gcc lib functions */
+EXPORT_SYMBOL(__ashldi3);
+EXPORT_SYMBOL(__ashrdi3);
+EXPORT_SYMBOL(__umulsi3_highpart);
+EXPORT_SYMBOL(__smulsi3_highpart);
+EXPORT_SYMBOL(__divsi3);
+EXPORT_SYMBOL(__lshrdi3);
+EXPORT_SYMBOL(__modsi3);
+EXPORT_SYMBOL(__muldi3);
+EXPORT_SYMBOL(__udivsi3);
+EXPORT_SYMBOL(__umodsi3);
+
+EXPORT_SYMBOL(outsb);
+EXPORT_SYMBOL(insb);
+EXPORT_SYMBOL(outsw);
+EXPORT_SYMBOL(insw);
+EXPORT_SYMBOL(outsl);
+EXPORT_SYMBOL(insl);
+EXPORT_SYMBOL(irq_flags);
+EXPORT_SYMBOL(iounmap);
+EXPORT_SYMBOL(blackfin_dcache_invalidate_range);
+EXPORT_SYMBOL(blackfin_icache_dcache_flush_range);
+EXPORT_SYMBOL(blackfin_icache_flush_range);
+EXPORT_SYMBOL(blackfin_dcache_flush_range);
+EXPORT_SYMBOL(blackfin_dflush_page);
+
+EXPORT_SYMBOL(csum_partial);
+EXPORT_SYMBOL(__init_begin);
+EXPORT_SYMBOL(__init_end);
+EXPORT_SYMBOL(_ebss_l1);
+EXPORT_SYMBOL(_stext_l1);
+EXPORT_SYMBOL(_etext_l1);
+EXPORT_SYMBOL(_sdata_l1);
+EXPORT_SYMBOL(_ebss_b_l1);
+EXPORT_SYMBOL(_sdata_b_l1);
diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c
new file mode 100644
index 000000000000..539eb24e062f
--- /dev/null
+++ b/arch/blackfin/kernel/dma-mapping.c
@@ -0,0 +1,183 @@
+/*
+ * File: arch/blackfin/kernel/dma-mapping.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: Dynamic DMA mapping support.
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/bootmem.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/bfin-global.h>
+
+static spinlock_t dma_page_lock;
+static unsigned int *dma_page;
+static unsigned int dma_pages;
+static unsigned long dma_base;
+static unsigned long dma_size;
+static unsigned int dma_initialized;
+
+void dma_alloc_init(unsigned long start, unsigned long end)
+{
+ spin_lock_init(&dma_page_lock);
+ dma_initialized = 0;
+
+ dma_page = (unsigned int *)__get_free_page(GFP_KERNEL);
+ memset(dma_page, 0, PAGE_SIZE);
+ dma_base = PAGE_ALIGN(start);
+ dma_size = PAGE_ALIGN(end) - PAGE_ALIGN(start);
+ dma_pages = dma_size >> PAGE_SHIFT;
+ memset((void *)dma_base, 0, DMA_UNCACHED_REGION);
+ dma_initialized = 1;
+
+ printk(KERN_INFO "%s: dma_page @ 0x%p - %d pages at 0x%08lx\n", __FUNCTION__,
+ dma_page, dma_pages, dma_base);
+}
+
+static inline unsigned int get_pages(size_t size)
+{
+ return ((size - 1) >> PAGE_SHIFT) + 1;
+}
+
+static unsigned long __alloc_dma_pages(unsigned int pages)
+{
+ unsigned long ret = 0, flags;
+ int i, count = 0;
+
+ if (dma_initialized == 0)
+ dma_alloc_init(_ramend - DMA_UNCACHED_REGION, _ramend);
+
+ spin_lock_irqsave(&dma_page_lock, flags);
+
+ for (i = 0; i < dma_pages;) {
+ if (dma_page[i++] == 0) {
+ if (++count == pages) {
+ while (count--)
+ dma_page[--i] = 1;
+ ret = dma_base + (i << PAGE_SHIFT);
+ break;
+ }
+ } else
+ count = 0;
+ }
+ spin_unlock_irqrestore(&dma_page_lock, flags);
+ return ret;
+}
+
+static void __free_dma_pages(unsigned long addr, unsigned int pages)
+{
+ unsigned long page = (addr - dma_base) >> PAGE_SHIFT;
+ unsigned long flags;
+ int i;
+
+ if ((page + pages) > dma_pages) {
+ printk(KERN_ERR "%s: freeing outside range.\n", __FUNCTION__);
+ BUG();
+ }
+
+ spin_lock_irqsave(&dma_page_lock, flags);
+ for (i = page; i < page + pages; i++) {
+ dma_page[i] = 0;
+ }
+ spin_unlock_irqrestore(&dma_page_lock, flags);
+}
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t * dma_handle, gfp_t gfp)
+{
+ void *ret;
+
+ ret = (void *)__alloc_dma_pages(get_pages(size));
+
+ if (ret) {
+ memset(ret, 0, size);
+ *dma_handle = virt_to_phys(ret);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(dma_alloc_coherent);
+
+void
+dma_free_coherent(struct device *dev, size_t size, void *vaddr,
+ dma_addr_t dma_handle)
+{
+ __free_dma_pages((unsigned long)vaddr, get_pages(size));
+}
+EXPORT_SYMBOL(dma_free_coherent);
+
+/*
+ * Dummy functions defined for some existing drivers
+ */
+
+dma_addr_t
+dma_map_single(struct device *dev, void *ptr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+
+ invalidate_dcache_range((unsigned long)ptr,
+ (unsigned long)ptr + size);
+
+ return (dma_addr_t) ptr;
+}
+EXPORT_SYMBOL(dma_map_single);
+
+int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+ enum dma_data_direction direction)
+{
+ int i;
+
+ BUG_ON(direction == DMA_NONE);
+
+ for (i = 0; i < nents; i++)
+ invalidate_dcache_range(sg_dma_address(&sg[i]),
+ sg_dma_address(&sg[i]) +
+ sg_dma_len(&sg[i]));
+
+ return nents;
+}
+EXPORT_SYMBOL(dma_map_sg);
+
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+}
+EXPORT_SYMBOL(dma_unmap_single);
+
+void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+ int nhwentries, enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+}
+EXPORT_SYMBOL(dma_unmap_sg);
diff --git a/arch/blackfin/kernel/dualcore_test.c b/arch/blackfin/kernel/dualcore_test.c
new file mode 100644
index 000000000000..8b89c99f9dfa
--- /dev/null
+++ b/arch/blackfin/kernel/dualcore_test.c
@@ -0,0 +1,49 @@
+/*
+ * File: arch/blackfin/kernel/dualcore_test.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: Small test code for CoreB on a BF561
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+
+static int *testarg = (int*)0xfeb00000;
+
+static int test_init(void)
+{
+ *testarg = 1;
+ printk("Dual core test module inserted: set testarg = [%d]\n @ [%p]\n",
+ *testarg, testarg);
+ return 0;
+}
+
+static void test_exit(void)
+{
+ printk("Dual core test module removed: testarg = [%d]\n", *testarg);
+}
+
+module_init(test_init);
+module_exit(test_exit);
diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S
new file mode 100644
index 000000000000..5880b270bd50
--- /dev/null
+++ b/arch/blackfin/kernel/entry.S
@@ -0,0 +1,94 @@
+/*
+ * File: arch/blackfin/kernel/entry.S
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/thread_info.h>
+#include <asm/errno.h>
+#include <asm/asm-offsets.h>
+
+#include <asm/mach-common/context.S>
+
+#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
+.section .l1.text
+#else
+.text
+#endif
+
+ENTRY(_ret_from_fork)
+ SP += -12;
+ call _schedule_tail;
+ SP += 12;
+ r0 = [sp + PT_IPEND];
+ cc = bittst(r0,1);
+ if cc jump .Lin_kernel;
+ RESTORE_CONTEXT
+ rti;
+.Lin_kernel:
+ bitclr(r0,1);
+ [sp + PT_IPEND] = r0;
+ /* do a 'fake' RTI by jumping to [RETI]
+ * to avoid clearing supervisor mode in child
+ */
+ RESTORE_ALL_SYS
+ p0 = reti;
+ jump (p0);
+
+ENTRY(_sys_fork)
+ r0 = -EINVAL;
+ rts;
+
+ENTRY(_sys_vfork)
+ r0 = sp;
+ r0 += 24;
+ [--sp] = rets;
+ SP += -12;
+ call _bfin_vfork;
+ SP += 12;
+ rets = [sp++];
+ rts;
+
+ENTRY(_sys_clone)
+ r0 = sp;
+ r0 += 24;
+ [--sp] = rets;
+ SP += -12;
+ call _bfin_clone;
+ SP += 12;
+ rets = [sp++];
+ rts;
+
+ENTRY(_sys_rt_sigreturn)
+ r0 = sp;
+ r0 += 24;
+ [--sp] = rets;
+ SP += -12;
+ call _do_rt_sigreturn;
+ SP += 12;
+ rets = [sp++];
+ rts;
diff --git a/arch/blackfin/kernel/flat.c b/arch/blackfin/kernel/flat.c
new file mode 100644
index 000000000000..a92587b628b5
--- /dev/null
+++ b/arch/blackfin/kernel/flat.c
@@ -0,0 +1,101 @@
+/*
+ * arch/blackfin/kernel/flat.c
+ *
+ * Copyright (C) 2007 Analog Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/flat.h>
+
+#define FLAT_BFIN_RELOC_TYPE_16_BIT 0
+#define FLAT_BFIN_RELOC_TYPE_16H_BIT 1
+#define FLAT_BFIN_RELOC_TYPE_32_BIT 2
+
+unsigned long bfin_get_addr_from_rp(unsigned long *ptr,
+ unsigned long relval,
+ unsigned long flags,
+ unsigned long *persistent)
+{
+ unsigned short *usptr = (unsigned short *)ptr;
+ int type = (relval >> 26) & 7;
+ unsigned long val;
+
+ switch (type) {
+ case FLAT_BFIN_RELOC_TYPE_16_BIT:
+ case FLAT_BFIN_RELOC_TYPE_16H_BIT:
+ usptr = (unsigned short *)ptr;
+ pr_debug("*usptr = %x", get_unaligned(usptr));
+ val = get_unaligned(usptr);
+ val += *persistent;
+ break;
+
+ case FLAT_BFIN_RELOC_TYPE_32_BIT:
+ pr_debug("*ptr = %lx", get_unaligned(ptr));
+ val = get_unaligned(ptr);
+ break;
+
+ default:
+ pr_debug("BINFMT_FLAT: Unknown relocation type %x\n",
+ type);
+
+ return 0;
+ }
+
+ /*
+ * Stack-relative relocs contain the offset into the stack, we
+ * have to add the stack's start address here and return 1 from
+ * flat_addr_absolute to prevent the normal address calculations
+ */
+ if (relval & (1 << 29))
+ return val + current->mm->context.end_brk;
+
+ if ((flags & FLAT_FLAG_GOTPIC) == 0)
+ val = htonl(val);
+ return val;
+}
+EXPORT_SYMBOL(bfin_get_addr_from_rp);
+
+/*
+ * Insert the address ADDR into the symbol reference at RP;
+ * RELVAL is the raw relocation-table entry from which RP is derived
+ */
+void bfin_put_addr_at_rp(unsigned long *ptr, unsigned long addr,
+ unsigned long relval)
+{
+ unsigned short *usptr = (unsigned short *)ptr;
+ int type = (relval >> 26) & 7;
+
+ switch (type) {
+ case FLAT_BFIN_RELOC_TYPE_16_BIT:
+ put_unaligned(addr, usptr);
+ pr_debug("new value %x at %p", get_unaligned(usptr),
+ usptr);
+ break;
+
+ case FLAT_BFIN_RELOC_TYPE_16H_BIT:
+ put_unaligned(addr >> 16, usptr);
+ pr_debug("new value %x", get_unaligned(usptr));
+ break;
+
+ case FLAT_BFIN_RELOC_TYPE_32_BIT:
+ put_unaligned(addr, ptr);
+ pr_debug("new ptr =%lx", get_unaligned(ptr));
+ break;
+ }
+}
+EXPORT_SYMBOL(bfin_put_addr_at_rp);
diff --git a/arch/blackfin/kernel/init_task.c b/arch/blackfin/kernel/init_task.c
new file mode 100644
index 000000000000..b45188f8512e
--- /dev/null
+++ b/arch/blackfin/kernel/init_task.c
@@ -0,0 +1,60 @@
+/*
+ * File: arch/blackfin/kernel/init_task.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: This file contains the simple DMA Implementation for Blackfin
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/init_task.h>
+#include <linux/mqueue.h>
+
+static struct fs_struct init_fs = INIT_FS;
+static struct files_struct init_files = INIT_FILES;
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+
+struct mm_struct init_mm = INIT_MM(init_mm);
+EXPORT_SYMBOL(init_mm);
+
+/*
+ * Initial task structure.
+ *
+ * All other task structs will be allocated on slabs in fork.c
+ */
+struct task_struct init_task = INIT_TASK(init_task);
+EXPORT_SYMBOL(init_task);
+
+/*
+ * Initial thread structure.
+ *
+ * We need to make sure that this is 8192-byte aligned due to the
+ * way process stacks are handled. This is done by having a special
+ * "init_task" linker map entry.
+ */
+union thread_union init_thread_union
+ __attribute__ ((__section__(".data.init_task"))) = {
+INIT_THREAD_INFO(init_task)};
diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c
new file mode 100644
index 000000000000..df5bf022cf79
--- /dev/null
+++ b/arch/blackfin/kernel/irqchip.c
@@ -0,0 +1,147 @@
+/*
+ * File: arch/blackfin/kernel/irqchip.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: This file contains the simple DMA Implementation for Blackfin
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/random.h>
+#include <linux/seq_file.h>
+#include <linux/kallsyms.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+static unsigned long irq_err_count;
+static spinlock_t irq_controller_lock;
+
+/*
+ * Dummy mask/unmask handler
+ */
+void dummy_mask_unmask_irq(unsigned int irq)
+{
+}
+
+void ack_bad_irq(unsigned int irq)
+{
+ irq_err_count += 1;
+ printk(KERN_ERR "IRQ: spurious interrupt %d\n", irq);
+}
+EXPORT_SYMBOL(ack_bad_irq);
+
+static struct irq_chip bad_chip = {
+ .ack = dummy_mask_unmask_irq,
+ .mask = dummy_mask_unmask_irq,
+ .unmask = dummy_mask_unmask_irq,
+};
+
+static struct irq_desc bad_irq_desc = {
+ .chip = &bad_chip,
+ .handle_irq = handle_bad_irq,
+ .depth = 1,
+};
+
+int show_interrupts(struct seq_file *p, void *v)
+{
+ int i = *(loff_t *) v;
+ struct irqaction *action;
+ unsigned long flags;
+
+ if (i < NR_IRQS) {
+ spin_lock_irqsave(&irq_desc[i].lock, flags);
+ action = irq_desc[i].action;
+ if (!action)
+ goto unlock;
+
+ seq_printf(p, "%3d: %10u ", i, kstat_irqs(i));
+ seq_printf(p, " %s", action->name);
+ for (action = action->next; action; action = action->next)
+ seq_printf(p, ", %s", action->name);
+
+ seq_putc(p, '\n');
+ unlock:
+ spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+ } else if (i == NR_IRQS) {
+ seq_printf(p, "Err: %10lu\n", irq_err_count);
+ }
+ return 0;
+}
+
+/*
+ * do_IRQ handles all hardware IRQ's. Decoded IRQs should not
+ * come via this function. Instead, they should provide their
+ * own 'handler'
+ */
+
+#ifdef CONFIG_DO_IRQ_L1
+asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)__attribute__((l1_text));
+#endif
+
+asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
+{
+ struct pt_regs *old_regs;
+ struct irq_desc *desc = irq_desc + irq;
+ unsigned short pending, other_ints;
+
+ old_regs = set_irq_regs(regs);
+
+ /*
+ * Some hardware gives randomly wrong interrupts. Rather
+ * than crashing, do something sensible.
+ */
+ if (irq >= NR_IRQS)
+ desc = &bad_irq_desc;
+
+ irq_enter();
+
+ generic_handle_irq(irq);
+
+ /* If we're the only interrupt running (ignoring IRQ15 which is for
+ syscalls), lower our priority to IRQ14 so that softirqs run at
+ that level. If there's another, lower-level interrupt, irq_exit
+ will defer softirqs to that. */
+ CSYNC();
+ pending = bfin_read_IPEND() & ~0x8000;
+ other_ints = pending & (pending - 1);
+ if (other_ints == 0)
+ lower_to_irq14();
+ irq_exit();
+
+ set_irq_regs(old_regs);
+}
+
+void __init init_IRQ(void)
+{
+ struct irq_desc *desc;
+ int irq;
+
+ spin_lock_init(&irq_controller_lock);
+ for (irq = 0, desc = irq_desc; irq < NR_IRQS; irq++, desc++) {
+ *desc = bad_irq_desc;
+ }
+
+ init_arch_irq();
+}
diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c
new file mode 100644
index 000000000000..372f756f1ad9
--- /dev/null
+++ b/arch/blackfin/kernel/module.c
@@ -0,0 +1,429 @@
+/*
+ * File: arch/blackfin/kernel/module.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <asm/dma.h>
+#include <asm/cacheflush.h>
+
+/*
+ * handle arithmetic relocations.
+ * See binutils/bfd/elf32-bfin.c for more details
+ */
+#define RELOC_STACK_SIZE 100
+static uint32_t reloc_stack[RELOC_STACK_SIZE];
+static unsigned int reloc_stack_tos;
+
+#define is_reloc_stack_empty() ((reloc_stack_tos > 0)?0:1)
+
+static void reloc_stack_push(uint32_t value)
+{
+ reloc_stack[reloc_stack_tos++] = value;
+}
+
+static uint32_t reloc_stack_pop(void)
+{
+ return reloc_stack[--reloc_stack_tos];
+}
+
+static uint32_t reloc_stack_operate(unsigned int oper, struct module *mod)
+{
+ uint32_t value;
+
+ switch (oper) {
+ case R_add:
+ value = reloc_stack[reloc_stack_tos - 2] +
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ case R_sub:
+ value = reloc_stack[reloc_stack_tos - 2] -
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ case R_mult:
+ value = reloc_stack[reloc_stack_tos - 2] *
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ case R_div:
+ value = reloc_stack[reloc_stack_tos - 2] /
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ case R_mod:
+ value = reloc_stack[reloc_stack_tos - 2] %
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ case R_lshift:
+ value = reloc_stack[reloc_stack_tos - 2] <<
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ case R_rshift:
+ value = reloc_stack[reloc_stack_tos - 2] >>
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ case R_and:
+ value = reloc_stack[reloc_stack_tos - 2] &
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ case R_or:
+ value = reloc_stack[reloc_stack_tos - 2] |
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ case R_xor:
+ value = reloc_stack[reloc_stack_tos - 2] ^
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ case R_land:
+ value = reloc_stack[reloc_stack_tos - 2] &&
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ case R_lor:
+ value = reloc_stack[reloc_stack_tos - 2] ||
+ reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 2;
+ break;
+ case R_neg:
+ value = -reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos--;
+ break;
+ case R_comp:
+ value = ~reloc_stack[reloc_stack_tos - 1];
+ reloc_stack_tos -= 1;
+ break;
+ default:
+ printk(KERN_WARNING "module %s: unhandled reloction\n",
+ mod->name);
+ return 0;
+ }
+
+ /* now push the new value back on stack */
+ reloc_stack_push(value);
+
+ return value;
+}
+
+void *module_alloc(unsigned long size)
+{
+ if (size == 0)
+ return NULL;
+ return vmalloc(size);
+}
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+ vfree(module_region);
+}
+
+/* Transfer the section to the L1 memory */
+int
+module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
+ char *secstrings, struct module *mod)
+{
+ Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum;
+ void *dest = NULL;
+
+ for (s = sechdrs; s < sechdrs_end; ++s) {
+ if ((strcmp(".l1.text", secstrings + s->sh_name) == 0) ||
+ ((strcmp(".text", secstrings + s->sh_name)==0) &&
+ (hdr->e_flags & FLG_CODE_IN_L1) && (s->sh_size > 0))) {
+ mod->arch.text_l1 = s;
+ dest = l1_inst_sram_alloc(s->sh_size);
+ if (dest == NULL) {
+ printk(KERN_ERR
+ "module %s: L1 instruction memory allocation failed\n",
+ mod->name);
+ return -1;
+ }
+ dma_memcpy(dest, (void *)s->sh_addr, s->sh_size);
+ s->sh_flags &= ~SHF_ALLOC;
+ s->sh_addr = (unsigned long)dest;
+ }
+ if ((strcmp(".l1.data", secstrings + s->sh_name) == 0)||
+ ((strcmp(".data", secstrings + s->sh_name)==0) &&
+ (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
+ mod->arch.data_a_l1 = s;
+ dest = l1_data_sram_alloc(s->sh_size);
+ if (dest == NULL) {
+ printk(KERN_ERR
+ "module %s: L1 data memory allocation failed\n",
+ mod->name);
+ return -1;
+ }
+ memcpy(dest, (void *)s->sh_addr, s->sh_size);
+ s->sh_flags &= ~SHF_ALLOC;
+ s->sh_addr = (unsigned long)dest;
+ }
+ if (strcmp(".l1.bss", secstrings + s->sh_name) == 0 ||
+ ((strcmp(".bss", secstrings + s->sh_name)==0) &&
+ (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
+ mod->arch.bss_a_l1 = s;
+ dest = l1_data_sram_alloc(s->sh_size);
+ if (dest == NULL) {
+ printk(KERN_ERR
+ "module %s: L1 data memory allocation failed\n",
+ mod->name);
+ return -1;
+ }
+ memset(dest, 0, s->sh_size);
+ s->sh_flags &= ~SHF_ALLOC;
+ s->sh_addr = (unsigned long)dest;
+ }
+ if (strcmp(".l1.data.B", secstrings + s->sh_name) == 0) {
+ mod->arch.data_b_l1 = s;
+ dest = l1_data_B_sram_alloc(s->sh_size);
+ if (dest == NULL) {
+ printk(KERN_ERR
+ "module %s: L1 data memory allocation failed\n",
+ mod->name);
+ return -1;
+ }
+ memcpy(dest, (void *)s->sh_addr, s->sh_size);
+ s->sh_flags &= ~SHF_ALLOC;
+ s->sh_addr = (unsigned long)dest;
+ }
+ if (strcmp(".l1.bss.B", secstrings + s->sh_name) == 0) {
+ mod->arch.bss_b_l1 = s;
+ dest = l1_data_B_sram_alloc(s->sh_size);
+ if (dest == NULL) {
+ printk(KERN_ERR
+ "module %s: L1 data memory allocation failed\n",
+ mod->name);
+ return -1;
+ }
+ memset(dest, 0, s->sh_size);
+ s->sh_flags &= ~SHF_ALLOC;
+ s->sh_addr = (unsigned long)dest;
+ }
+ }
+ return 0;
+}
+
+int
+apply_relocate(Elf_Shdr * sechdrs, const char *strtab,
+ unsigned int symindex, unsigned int relsec, struct module *me)
+{
+ printk(KERN_ERR "module %s: .rel unsupported\n", me->name);
+ return -ENOEXEC;
+}
+
+/*************************************************************************/
+/* FUNCTION : apply_relocate_add */
+/* ABSTRACT : Blackfin specific relocation handling for the loadable */
+/* modules. Modules are expected to be .o files. */
+/* Arithmetic relocations are handled. */
+/* We do not expect LSETUP to be split and hence is not */
+/* handled. */
+/* R_byte and R_byte2 are also not handled as the gas */
+/* does not generate it. */
+/*************************************************************************/
+int
+apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
+ unsigned int symindex, unsigned int relsec,
+ struct module *mod)
+{
+ unsigned int i;
+ unsigned short tmp;
+ Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
+ Elf32_Sym *sym;
+ uint32_t *location32;
+ uint16_t *location16;
+ uint32_t value;
+
+ pr_debug("Applying relocate section %u to %u\n", relsec,
+ sechdrs[relsec].sh_info);
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+ /* This is where to make the change */
+ location16 =
+ (uint16_t *) (sechdrs[sechdrs[relsec].sh_info].sh_addr +
+ rel[i].r_offset);
+ location32 = (uint32_t *) location16;
+ /* This is the symbol it is referring to. Note that all
+ undefined symbols have been resolved. */
+ sym = (Elf32_Sym *) sechdrs[symindex].sh_addr
+ + ELF32_R_SYM(rel[i].r_info);
+ if (is_reloc_stack_empty()) {
+ value = sym->st_value;
+ } else {
+ value = reloc_stack_pop();
+ }
+ value += rel[i].r_addend;
+ pr_debug("location is %x, value is %x type is %d \n",
+ (unsigned int) location32, value,
+ ELF32_R_TYPE(rel[i].r_info));
+
+ switch (ELF32_R_TYPE(rel[i].r_info)) {
+
+ case R_pcrel24:
+ case R_pcrel24_jump_l:
+ /* Add the value, subtract its postition */
+ location16 =
+ (uint16_t *) (sechdrs[sechdrs[relsec].sh_info].
+ sh_addr + rel[i].r_offset - 2);
+ location32 = (uint32_t *) location16;
+ value -= (uint32_t) location32;
+ value >>= 1;
+ pr_debug("value is %x, before %x-%x after %x-%x\n", value,
+ *location16, *(location16 + 1),
+ (*location16 & 0xff00) | (value >> 16 & 0x00ff),
+ value & 0xffff);
+ *location16 =
+ (*location16 & 0xff00) | (value >> 16 & 0x00ff);
+ *(location16 + 1) = value & 0xffff;
+ break;
+ case R_pcrel12_jump:
+ case R_pcrel12_jump_s:
+ value -= (uint32_t) location32;
+ value >>= 1;
+ *location16 = (value & 0xfff);
+ break;
+ case R_pcrel10:
+ value -= (uint32_t) location32;
+ value >>= 1;
+ *location16 = (value & 0x3ff);
+ break;
+ case R_luimm16:
+ pr_debug("before %x after %x\n", *location16,
+ (value & 0xffff));
+ tmp = (value & 0xffff);
+ if((unsigned long)location16 >= L1_CODE_START) {
+ dma_memcpy(location16, &tmp, 2);
+ } else
+ *location16 = tmp;
+ break;
+ case R_huimm16:
+ pr_debug("before %x after %x\n", *location16,
+ ((value >> 16) & 0xffff));
+ tmp = ((value >> 16) & 0xffff);
+ if((unsigned long)location16 >= L1_CODE_START) {
+ dma_memcpy(location16, &tmp, 2);
+ } else
+ *location16 = tmp;
+ break;
+ case R_rimm16:
+ *location16 = (value & 0xffff);
+ break;
+ case R_byte4_data:
+ pr_debug("before %x after %x\n", *location32, value);
+ *location32 = value;
+ break;
+ case R_push:
+ reloc_stack_push(value);
+ break;
+ case R_const:
+ reloc_stack_push(rel[i].r_addend);
+ break;
+ case R_add:
+ case R_sub:
+ case R_mult:
+ case R_div:
+ case R_mod:
+ case R_lshift:
+ case R_rshift:
+ case R_and:
+ case R_or:
+ case R_xor:
+ case R_land:
+ case R_lor:
+ case R_neg:
+ case R_comp:
+ reloc_stack_operate(ELF32_R_TYPE(rel[i].r_info), mod);
+ break;
+ default:
+ printk(KERN_ERR "module %s: Unknown relocation: %u\n",
+ mod->name, ELF32_R_TYPE(rel[i].r_info));
+ return -ENOEXEC;
+ }
+ }
+ return 0;
+}
+
+int
+module_finalize(const Elf_Ehdr * hdr,
+ const Elf_Shdr * sechdrs, struct module *mod)
+{
+ unsigned int i, strindex = 0, symindex = 0;
+ char *secstrings;
+
+ secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+
+ for (i = 1; i < hdr->e_shnum; i++) {
+ /* Internal symbols and strings. */
+ if (sechdrs[i].sh_type == SHT_SYMTAB) {
+ symindex = i;
+ strindex = sechdrs[i].sh_link;
+ }
+ }
+
+ for (i = 1; i < hdr->e_shnum; i++) {
+ const char *strtab = (char *)sechdrs[strindex].sh_addr;
+ unsigned int info = sechdrs[i].sh_info;
+
+ /* Not a valid relocation section? */
+ if (info >= hdr->e_shnum)
+ continue;
+
+ if ((sechdrs[i].sh_type == SHT_RELA) &&
+ ((strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0)||
+ ((strcmp(".rela.text", secstrings + sechdrs[i].sh_name) == 0) &&
+ (hdr->e_flags & FLG_CODE_IN_L1)))) {
+ apply_relocate_add((Elf_Shdr *) sechdrs, strtab,
+ symindex, i, mod);
+ }
+ }
+ return 0;
+}
+
+void module_arch_cleanup(struct module *mod)
+{
+ if ((mod->arch.text_l1) && (mod->arch.text_l1->sh_addr))
+ l1_inst_sram_free((void*)mod->arch.text_l1->sh_addr);
+ if ((mod->arch.data_a_l1) && (mod->arch.data_a_l1->sh_addr))
+ l1_data_sram_free((void*)mod->arch.data_a_l1->sh_addr);
+ if ((mod->arch.bss_a_l1) && (mod->arch.bss_a_l1->sh_addr))
+ l1_data_sram_free((void*)mod->arch.bss_a_l1->sh_addr);
+ if ((mod->arch.data_b_l1) && (mod->arch.data_b_l1->sh_addr))
+ l1_data_B_sram_free((void*)mod->arch.data_b_l1->sh_addr);
+ if ((mod->arch.bss_b_l1) && (mod->arch.bss_b_l1->sh_addr))
+ l1_data_B_sram_free((void*)mod->arch.bss_b_l1->sh_addr);
+}
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
new file mode 100644
index 000000000000..3eff7439d8d3
--- /dev/null
+++ b/arch/blackfin/kernel/process.c
@@ -0,0 +1,394 @@
+/*
+ * File: arch/blackfin/kernel/process.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: Blackfin architecture-dependent process handling.
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/smp_lock.h>
+#include <linux/unistd.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+
+#include <asm/blackfin.h>
+#include <asm/uaccess.h>
+
+#define LED_ON 0
+#define LED_OFF 1
+
+asmlinkage void ret_from_fork(void);
+
+/* Points to the SDRAM backup memory for the stack that is currently in
+ * L1 scratchpad memory.
+ */
+void *current_l1_stack_save;
+
+/* The number of tasks currently using a L1 stack area. The SRAM is
+ * allocated/deallocated whenever this changes from/to zero.
+ */
+int nr_l1stack_tasks;
+
+/* Start and length of the area in L1 scratchpad memory which we've allocated
+ * for process stacks.
+ */
+void *l1_stack_base;
+unsigned long l1_stack_len;
+
+/*
+ * Powermanagement idle function, if any..
+ */
+void (*pm_idle)(void) = NULL;
+EXPORT_SYMBOL(pm_idle);
+
+void (*pm_power_off)(void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
+
+/*
+ * We are using a different LED from the one used to indicate timer interrupt.
+ */
+#if defined(CONFIG_BFIN_IDLE_LED)
+static inline void leds_switch(int flag)
+{
+ unsigned short tmp = 0;
+
+ tmp = bfin_read_CONFIG_BFIN_IDLE_LED_PORT();
+ SSYNC();
+
+ if (flag == LED_ON)
+ tmp &= ~CONFIG_BFIN_IDLE_LED_PIN; /* light on */
+ else
+ tmp |= CONFIG_BFIN_IDLE_LED_PIN; /* light off */
+
+ bfin_write_CONFIG_BFIN_IDLE_LED_PORT(tmp);
+ SSYNC();
+
+}
+#else
+static inline void leds_switch(int flag)
+{
+}
+#endif
+
+/*
+ * The idle loop on BFIN
+ */
+#ifdef CONFIG_IDLE_L1
+void default_idle(void)__attribute__((l1_text));
+void cpu_idle(void)__attribute__((l1_text));
+#endif
+
+void default_idle(void)
+{
+ while (!need_resched()) {
+ leds_switch(LED_OFF);
+ local_irq_disable();
+ if (likely(!need_resched()))
+ idle_with_irq_disabled();
+ local_irq_enable();
+ leds_switch(LED_ON);
+ }
+}
+
+void (*idle)(void) = default_idle;
+
+/*
+ * The idle thread. There's no useful work to be
+ * done, so just try to conserve power and have a
+ * low exit latency (ie sit in a loop waiting for
+ * somebody to say that they'd like to reschedule)
+ */
+void cpu_idle(void)
+{
+ /* endless idle loop with no priority at all */
+ while (1) {
+ idle();
+ preempt_enable_no_resched();
+ schedule();
+ preempt_disable();
+ }
+}
+
+void machine_restart(char *__unused)
+{
+#if defined(CONFIG_BLKFIN_CACHE)
+ bfin_write_IMEM_CONTROL(0x01);
+ SSYNC();
+#endif
+ bfin_reset();
+ /* Dont do anything till the reset occurs */
+ while (1) {
+ SSYNC();
+ }
+}
+
+void machine_halt(void)
+{
+ for (;;)
+ asm volatile ("idle");
+}
+
+void machine_power_off(void)
+{
+ for (;;)
+ asm volatile ("idle");
+}
+
+void show_regs(struct pt_regs *regs)
+{
+ printk(KERN_NOTICE "\n");
+ printk(KERN_NOTICE
+ "PC: %08lu Status: %04lu SysStatus: %04lu RETS: %08lu\n",
+ regs->pc, regs->astat, regs->seqstat, regs->rets);
+ printk(KERN_NOTICE
+ "A0.x: %08lx A0.w: %08lx A1.x: %08lx A1.w: %08lx\n",
+ regs->a0x, regs->a0w, regs->a1x, regs->a1w);
+ printk(KERN_NOTICE "P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n",
+ regs->p0, regs->p1, regs->p2, regs->p3);
+ printk(KERN_NOTICE "P4: %08lx P5: %08lx\n", regs->p4, regs->p5);
+ printk(KERN_NOTICE "R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n",
+ regs->r0, regs->r1, regs->r2, regs->r3);
+ printk(KERN_NOTICE "R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n",
+ regs->r4, regs->r5, regs->r6, regs->r7);
+
+ if (!(regs->ipend))
+ printk("USP: %08lx\n", rdusp());
+}
+
+/* Fill in the fpu structure for a core dump. */
+
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t * fpregs)
+{
+ return 1;
+}
+
+/*
+ * This gets run with P1 containing the
+ * function to call, and R1 containing
+ * the "args". Note P0 is clobbered on the way here.
+ */
+void kernel_thread_helper(void);
+__asm__(".section .text\n"
+ ".align 4\n"
+ "_kernel_thread_helper:\n\t"
+ "\tsp += -12;\n\t"
+ "\tr0 = r1;\n\t" "\tcall (p1);\n\t" "\tcall _do_exit;\n" ".previous");
+
+/*
+ * Create a kernel thread.
+ */
+pid_t kernel_thread(int (*fn) (void *), void *arg, unsigned long flags)
+{
+ struct pt_regs regs;
+
+ memset(&regs, 0, sizeof(regs));
+
+ regs.r1 = (unsigned long)arg;
+ regs.p1 = (unsigned long)fn;
+ regs.pc = (unsigned long)kernel_thread_helper;
+ regs.orig_p0 = -1;
+ /* Set bit 2 to tell ret_from_fork we should be returning to kernel
+ mode. */
+ regs.ipend = 0x8002;
+ __asm__ __volatile__("%0 = syscfg;":"=da"(regs.syscfg):);
+ return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, &regs, 0, NULL,
+ NULL);
+}
+
+void flush_thread(void)
+{
+}
+
+asmlinkage int bfin_vfork(struct pt_regs *regs)
+{
+ return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0, NULL,
+ NULL);
+}
+
+asmlinkage int bfin_clone(struct pt_regs *regs)
+{
+ unsigned long clone_flags;
+ unsigned long newsp;
+
+ /* syscall2 puts clone_flags in r0 and usp in r1 */
+ clone_flags = regs->r0;
+ newsp = regs->r1;
+ if (!newsp)
+ newsp = rdusp();
+ else
+ newsp -= 12;
+ return do_fork(clone_flags, newsp, regs, 0, NULL, NULL);
+}
+
+int
+copy_thread(int nr, unsigned long clone_flags,
+ unsigned long usp, unsigned long topstk,
+ struct task_struct *p, struct pt_regs *regs)
+{
+ struct pt_regs *childregs;
+
+ childregs = (struct pt_regs *) (task_stack_page(p) + THREAD_SIZE) - 1;
+ *childregs = *regs;
+ childregs->r0 = 0;
+
+ p->thread.usp = usp;
+ p->thread.ksp = (unsigned long)childregs;
+ p->thread.pc = (unsigned long)ret_from_fork;
+
+ return 0;
+}
+
+/*
+ * fill in the user structure for a core dump..
+ */
+void dump_thread(struct pt_regs *regs, struct user *dump)
+{
+ dump->magic = CMAGIC;
+ dump->start_code = 0;
+ dump->start_stack = rdusp() & ~(PAGE_SIZE - 1);
+ dump->u_tsize = ((unsigned long)current->mm->end_code) >> PAGE_SHIFT;
+ dump->u_dsize = ((unsigned long)(current->mm->brk +
+ (PAGE_SIZE - 1))) >> PAGE_SHIFT;
+ dump->u_dsize -= dump->u_tsize;
+ dump->u_ssize = 0;
+
+ if (dump->start_stack < TASK_SIZE)
+ dump->u_ssize =
+ ((unsigned long)(TASK_SIZE -
+ dump->start_stack)) >> PAGE_SHIFT;
+
+ dump->u_ar0 = (struct user_regs_struct *)((int)&dump->regs - (int)dump);
+
+ dump->regs.r0 = regs->r0;
+ dump->regs.r1 = regs->r1;
+ dump->regs.r2 = regs->r2;
+ dump->regs.r3 = regs->r3;
+ dump->regs.r4 = regs->r4;
+ dump->regs.r5 = regs->r5;
+ dump->regs.r6 = regs->r6;
+ dump->regs.r7 = regs->r7;
+ dump->regs.p0 = regs->p0;
+ dump->regs.p1 = regs->p1;
+ dump->regs.p2 = regs->p2;
+ dump->regs.p3 = regs->p3;
+ dump->regs.p4 = regs->p4;
+ dump->regs.p5 = regs->p5;
+ dump->regs.orig_p0 = regs->orig_p0;
+ dump->regs.a0w = regs->a0w;
+ dump->regs.a1w = regs->a1w;
+ dump->regs.a0x = regs->a0x;
+ dump->regs.a1x = regs->a1x;
+ dump->regs.rets = regs->rets;
+ dump->regs.astat = regs->astat;
+ dump->regs.pc = regs->pc;
+}
+
+/*
+ * sys_execve() executes a new program.
+ */
+
+asmlinkage int sys_execve(char *name, char **argv, char **envp)
+{
+ int error;
+ char *filename;
+ struct pt_regs *regs = (struct pt_regs *)((&name) + 6);
+
+ lock_kernel();
+ filename = getname(name);
+ error = PTR_ERR(filename);
+ if (IS_ERR(filename))
+ goto out;
+ error = do_execve(filename, argv, envp, regs);
+ putname(filename);
+ out:
+ unlock_kernel();
+ return error;
+}
+
+unsigned long get_wchan(struct task_struct *p)
+{
+ unsigned long fp, pc;
+ unsigned long stack_page;
+ int count = 0;
+ if (!p || p == current || p->state == TASK_RUNNING)
+ return 0;
+
+ stack_page = (unsigned long)p;
+ fp = p->thread.usp;
+ do {
+ if (fp < stack_page + sizeof(struct thread_info) ||
+ fp >= 8184 + stack_page)
+ return 0;
+ pc = ((unsigned long *)fp)[1];
+ if (!in_sched_functions(pc))
+ return pc;
+ fp = *(unsigned long *)fp;
+ }
+ while (count++ < 16);
+ return 0;
+}
+
+#if defined(CONFIG_ACCESS_CHECK)
+int _access_ok(unsigned long addr, unsigned long size)
+{
+
+ if (addr > (addr + size))
+ return 0;
+ if (segment_eq(get_fs(),KERNEL_DS))
+ return 1;
+#ifdef CONFIG_MTD_UCLINUX
+ if (addr >= memory_start && (addr + size) <= memory_end)
+ return 1;
+ if (addr >= memory_mtd_end && (addr + size) <= physical_mem_end)
+ return 1;
+#else
+ if (addr >= memory_start && (addr + size) <= physical_mem_end)
+ return 1;
+#endif
+ if (addr >= (unsigned long)__init_begin &&
+ addr + size <= (unsigned long)__init_end)
+ return 1;
+ if (addr >= L1_SCRATCH_START
+ && addr + size <= L1_SCRATCH_START + L1_SCRATCH_LENGTH)
+ return 1;
+#if L1_CODE_LENGTH != 0
+ if (addr >= L1_CODE_START + (_etext_l1 - _stext_l1)
+ && addr + size <= L1_CODE_START + L1_CODE_LENGTH)
+ return 1;
+#endif
+#if L1_DATA_A_LENGTH != 0
+ if (addr >= L1_DATA_A_START + (_ebss_l1 - _sdata_l1)
+ && addr + size <= L1_DATA_A_START + L1_DATA_A_LENGTH)
+ return 1;
+#endif
+#if L1_DATA_B_LENGTH != 0
+ if (addr >= L1_DATA_B_START
+ && addr + size <= L1_DATA_B_START + L1_DATA_B_LENGTH)
+ return 1;
+#endif
+ return 0;
+}
+EXPORT_SYMBOL(_access_ok);
+#endif /* CONFIG_ACCESS_CHECK */
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
new file mode 100644
index 000000000000..d7c8e514cb92
--- /dev/null
+++ b/arch/blackfin/kernel/ptrace.c
@@ -0,0 +1,430 @@
+/*
+ * File: arch/blackfin/kernel/ptrace.c
+ * Based on: Taken from linux/kernel/ptrace.c
+ * Author: linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
+ *
+ * Created: 1/23/92
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/signal.h>
+
+#include <asm/uaccess.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/asm-offsets.h>
+#include <asm/dma.h>
+
+#define MAX_SHARED_LIBS 3
+#define TEXT_OFFSET 0
+/*
+ * does not yet catch signals sent when the child dies.
+ * in exit.c or in signal.c.
+ */
+
+/* determines which bits in the SYSCFG reg the user has access to. */
+/* 1 = access 0 = no access */
+#define SYSCFG_MASK 0x0007 /* SYSCFG reg */
+/* sets the trace bits. */
+#define TRACE_BITS 0x0001
+
+/* Find the stack offset for a register, relative to thread.esp0. */
+#define PT_REG(reg) ((long)&((struct pt_regs *)0)->reg)
+
+/*
+ * Get the address of the live pt_regs for the specified task.
+ * These are saved onto the top kernel stack when the process
+ * is not running.
+ *
+ * Note: if a user thread is execve'd from kernel space, the
+ * kernel stack will not be empty on entry to the kernel, so
+ * ptracing these tasks will fail.
+ */
+static inline struct pt_regs *get_user_regs(struct task_struct *task)
+{
+ return (struct pt_regs *)
+ ((unsigned long)task->thread_info +
+ (THREAD_SIZE - sizeof(struct pt_regs)));
+}
+
+/*
+ * Get all user integer registers.
+ */
+static inline int ptrace_getregs(struct task_struct *tsk, void __user * uregs)
+{
+ struct pt_regs *regs = get_user_regs(tsk);
+ return copy_to_user(uregs, regs, sizeof(struct pt_regs)) ? -EFAULT : 0;
+}
+
+/* Mapping from PT_xxx to the stack offset at which the register is
+ * saved. Notice that usp has no stack-slot and needs to be treated
+ * specially (see get_reg/put_reg below).
+ */
+
+/*
+ * Get contents of register REGNO in task TASK.
+ */
+static inline long get_reg(struct task_struct *task, int regno)
+{
+ unsigned char *reg_ptr;
+
+ struct pt_regs *regs =
+ (struct pt_regs *)((unsigned long)task->thread_info +
+ (THREAD_SIZE - sizeof(struct pt_regs)));
+ reg_ptr = (char *)regs;
+
+ switch (regno) {
+ case PT_USP:
+ return task->thread.usp;
+ default:
+ if (regno <= 216)
+ return *(long *)(reg_ptr + regno);
+ }
+ /* slight mystery ... never seems to come here but kernel misbehaves without this code! */
+
+ printk(KERN_WARNING "Request to get for unknown register %d\n", regno);
+ return 0;
+}
+
+/*
+ * Write contents of register REGNO in task TASK.
+ */
+static inline int
+put_reg(struct task_struct *task, int regno, unsigned long data)
+{
+ char * reg_ptr;
+
+ struct pt_regs *regs =
+ (struct pt_regs *)((unsigned long)task->thread_info +
+ (THREAD_SIZE - sizeof(struct pt_regs)));
+ reg_ptr = (char *)regs;
+
+ switch (regno) {
+ case PT_PC:
+ /*********************************************************************/
+ /* At this point the kernel is most likely in exception. */
+ /* The RETX register will be used to populate the pc of the process. */
+ /*********************************************************************/
+ regs->retx = data;
+ regs->pc = data;
+ break;
+ case PT_RETX:
+ break; /* regs->retx = data; break; */
+ case PT_USP:
+ regs->usp = data;
+ task->thread.usp = data;
+ break;
+ default:
+ if (regno <= 216)
+ *(long *)(reg_ptr + regno) = data;
+ }
+ return 0;
+}
+
+/*
+ * check that an address falls within the bounds of the target process's memory mappings
+ */
+static inline int is_user_addr_valid(struct task_struct *child,
+ unsigned long start, unsigned long len)
+{
+ struct vm_list_struct *vml;
+ struct sram_list_struct *sraml;
+
+ for (vml = child->mm->context.vmlist; vml; vml = vml->next)
+ if (start >= vml->vma->vm_start && start + len <= vml->vma->vm_end)
+ return 0;
+
+ for (sraml = child->mm->context.sram_list; sraml; sraml = sraml->next)
+ if (start >= (unsigned long)sraml->addr
+ && start + len <= (unsigned long)sraml->addr + sraml->length)
+ return 0;
+
+ return -EIO;
+}
+
+/*
+ * Called by kernel/ptrace.c when detaching..
+ *
+ * Make sure the single step bit is not set.
+ */
+void ptrace_disable(struct task_struct *child)
+{
+ unsigned long tmp;
+ /* make sure the single step bit is not set. */
+ tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16);
+ put_reg(child, PT_SR, tmp);
+}
+
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+{
+ int ret;
+ int add = 0;
+
+ switch (request) {
+ /* when I and D space are separate, these will need to be fixed. */
+ case PTRACE_PEEKDATA:
+ pr_debug("ptrace: PEEKDATA\n");
+ add = MAX_SHARED_LIBS * 4; /* space between text and data */
+ /* fall through */
+ case PTRACE_PEEKTEXT: /* read word at location addr. */
+ {
+ unsigned long tmp = 0;
+ int copied;
+
+ ret = -EIO;
+ pr_debug("ptrace: PEEKTEXT at addr 0x%08lx + add %d %ld\n", addr, add,
+ sizeof(data));
+ if (is_user_addr_valid(child, addr + add, sizeof(tmp)) < 0)
+ break;
+ pr_debug("ptrace: user address is valid\n");
+
+#if L1_CODE_LENGTH != 0
+ if (addr + add >= L1_CODE_START
+ && addr + add + sizeof(tmp) <= L1_CODE_START + L1_CODE_LENGTH) {
+ safe_dma_memcpy (&tmp, (const void *)(addr + add), sizeof(tmp));
+ copied = sizeof(tmp);
+ } else
+#endif
+ copied =
+ access_process_vm(child, addr + add, &tmp,
+ sizeof(tmp), 0);
+ pr_debug("ptrace: copied size %d [0x%08lx]\n", copied, tmp);
+ if (copied != sizeof(tmp))
+ break;
+ ret = put_user(tmp, (unsigned long *)data);
+ break;
+ }
+
+ /* read the word at location addr in the USER area. */
+ case PTRACE_PEEKUSR:
+ {
+ unsigned long tmp;
+ ret = -EIO;
+ tmp = 0;
+ if ((addr & 3) || (addr > (sizeof(struct pt_regs) + 16))) {
+ printk(KERN_WARNING "ptrace error : PEEKUSR : temporarily returning "
+ "0 - %x sizeof(pt_regs) is %lx\n",
+ (int)addr, sizeof(struct pt_regs));
+ break;
+ }
+ if (addr == sizeof(struct pt_regs)) {
+ /* PT_TEXT_ADDR */
+ tmp = child->mm->start_code + TEXT_OFFSET;
+ } else if (addr == (sizeof(struct pt_regs) + 4)) {
+ /* PT_TEXT_END_ADDR */
+ tmp = child->mm->end_code;
+ } else if (addr == (sizeof(struct pt_regs) + 8)) {
+ /* PT_DATA_ADDR */
+ tmp = child->mm->start_data;
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+ } else if (addr == (sizeof(struct pt_regs) + 12)) {
+ tmp = child->mm->context.exec_fdpic_loadmap;
+ } else if (addr == (sizeof(struct pt_regs) + 16)) {
+ tmp = child->mm->context.interp_fdpic_loadmap;
+#endif
+ } else {
+ tmp = get_reg(child, addr);
+ }
+ ret = put_user(tmp, (unsigned long *)data);
+ break;
+ }
+
+ /* when I and D space are separate, this will have to be fixed. */
+ case PTRACE_POKEDATA:
+ printk(KERN_NOTICE "ptrace: PTRACE_PEEKDATA\n");
+ /* fall through */
+ case PTRACE_POKETEXT: /* write the word at location addr. */
+ {
+ int copied;
+
+ ret = -EIO;
+ pr_debug("ptrace: POKETEXT at addr 0x%08lx + add %d %ld bytes %lx\n",
+ addr, add, sizeof(data), data);
+ if (is_user_addr_valid(child, addr + add, sizeof(data)) < 0)
+ break;
+ pr_debug("ptrace: user address is valid\n");
+
+#if L1_CODE_LENGTH != 0
+ if (addr + add >= L1_CODE_START
+ && addr + add + sizeof(data) <= L1_CODE_START + L1_CODE_LENGTH) {
+ safe_dma_memcpy ((void *)(addr + add), &data, sizeof(data));
+ copied = sizeof(data);
+ } else
+#endif
+ copied =
+ access_process_vm(child, addr + add, &data,
+ sizeof(data), 1);
+ pr_debug("ptrace: copied size %d\n", copied);
+ if (copied != sizeof(data))
+ break;
+ ret = 0;
+ break;
+ }
+
+ case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
+ ret = -EIO;
+ if ((addr & 3) || (addr > (sizeof(struct pt_regs) + 16))) {
+ printk(KERN_WARNING "ptrace error : POKEUSR: temporarily returning 0\n");
+ break;
+ }
+
+ if (addr >= (sizeof(struct pt_regs))) {
+ ret = 0;
+ break;
+ }
+ if (addr == PT_SYSCFG) {
+ data &= SYSCFG_MASK;
+ data |= get_reg(child, PT_SYSCFG);
+ }
+ ret = put_reg(child, addr, data);
+ break;
+
+ case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
+ case PTRACE_CONT:
+ { /* restart after signal. */
+ long tmp;
+
+ pr_debug("ptrace_cont\n");
+
+ ret = -EIO;
+ if (!valid_signal(data))
+ break;
+ if (request == PTRACE_SYSCALL)
+ set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ else
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+
+ child->exit_code = data;
+ /* make sure the single step bit is not set. */
+ tmp = get_reg(child, PT_SYSCFG) & ~(TRACE_BITS);
+ put_reg(child, PT_SYSCFG, tmp);
+ pr_debug("before wake_up_process\n");
+ wake_up_process(child);
+ ret = 0;
+ break;
+ }
+
+ /*
+ * make the child exit. Best I can do is send it a sigkill.
+ * perhaps it should be put in the status that it wants to
+ * exit.
+ */
+ case PTRACE_KILL:
+ {
+ long tmp;
+ ret = 0;
+ if (child->exit_state == EXIT_ZOMBIE) /* already dead */
+ break;
+ child->exit_code = SIGKILL;
+ /* make sure the single step bit is not set. */
+ tmp = get_reg(child, PT_SYSCFG) & ~(TRACE_BITS);
+ put_reg(child, PT_SYSCFG, tmp);
+ wake_up_process(child);
+ break;
+ }
+
+ case PTRACE_SINGLESTEP:
+ { /* set the trap flag. */
+ long tmp;
+
+ pr_debug("single step\n");
+ ret = -EIO;
+ if (!valid_signal(data))
+ break;
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+
+ tmp = get_reg(child, PT_SYSCFG) | (TRACE_BITS);
+ put_reg(child, PT_SYSCFG, tmp);
+
+ child->exit_code = data;
+ /* give it a chance to run. */
+ wake_up_process(child);
+ ret = 0;
+ break;
+ }
+
+ case PTRACE_DETACH:
+ { /* detach a process that was attached. */
+ ret = ptrace_detach(child, data);
+ break;
+ }
+
+ case PTRACE_GETREGS:
+ {
+
+ /* Get all gp regs from the child. */
+ ret = ptrace_getregs(child, (void __user *)data);
+ break;
+ }
+
+ case PTRACE_SETREGS:
+ {
+ printk(KERN_NOTICE
+ "ptrace: SETREGS: **** NOT IMPLEMENTED ***\n");
+ /* Set all gp regs in the child. */
+ ret = 0;
+ break;
+ }
+ default:
+ ret = ptrace_request(child, request, addr, data);
+ break;
+ }
+
+ return ret;
+}
+
+asmlinkage void syscall_trace(void)
+{
+
+ if (!test_thread_flag(TIF_SYSCALL_TRACE))
+ return;
+
+ if (!(current->ptrace & PT_PTRACED))
+ return;
+
+ /* the 0x80 provides a way for the tracing parent to distinguish
+ * between a syscall stop and SIGTRAP delivery
+ */
+ ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
+ ? 0x80 : 0));
+
+ /*
+ * this isn't the same as continuing with a signal, but it will do
+ * for normal use. strace only continues with a signal if the
+ * stopping signal is not SIGTRAP. -brl
+ */
+ if (current->exit_code) {
+ send_sig(current->exit_code, current, 1);
+ current->exit_code = 0;
+ }
+}
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
new file mode 100644
index 000000000000..342bb8dd56ac
--- /dev/null
+++ b/arch/blackfin/kernel/setup.c
@@ -0,0 +1,902 @@
+/*
+ * File: arch/blackfin/kernel/setup.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/delay.h>
+#include <linux/console.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/cpu.h>
+#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+
+#include <linux/ext2_fs.h>
+#include <linux/cramfs_fs.h>
+#include <linux/romfs_fs.h>
+
+#include <asm/cacheflush.h>
+#include <asm/blackfin.h>
+#include <asm/cplbinit.h>
+
+unsigned long memory_start, memory_end, physical_mem_end;
+unsigned long reserved_mem_dcache_on;
+unsigned long reserved_mem_icache_on;
+EXPORT_SYMBOL(memory_start);
+EXPORT_SYMBOL(memory_end);
+EXPORT_SYMBOL(physical_mem_end);
+EXPORT_SYMBOL(_ramend);
+
+#ifdef CONFIG_MTD_UCLINUX
+unsigned long memory_mtd_end, memory_mtd_start, mtd_size;
+unsigned long _ebss;
+EXPORT_SYMBOL(memory_mtd_end);
+EXPORT_SYMBOL(memory_mtd_start);
+EXPORT_SYMBOL(mtd_size);
+#endif
+
+char command_line[COMMAND_LINE_SIZE];
+
+#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
+static void generate_cpl_tables(void);
+#endif
+
+void __init bf53x_cache_init(void)
+{
+#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
+ generate_cpl_tables();
+#endif
+
+#ifdef CONFIG_BLKFIN_CACHE
+ bfin_icache_init();
+ printk(KERN_INFO "Instruction Cache Enabled\n");
+#endif
+
+#ifdef CONFIG_BLKFIN_DCACHE
+ bfin_dcache_init();
+ printk(KERN_INFO "Data Cache Enabled"
+# if defined CONFIG_BLKFIN_WB
+ " (write-back)"
+# elif defined CONFIG_BLKFIN_WT
+ " (write-through)"
+# endif
+ "\n");
+#endif
+}
+
+void bf53x_relocate_l1_mem(void)
+{
+ unsigned long l1_code_length;
+ unsigned long l1_data_a_length;
+ unsigned long l1_data_b_length;
+
+ l1_code_length = _etext_l1 - _stext_l1;
+ if (l1_code_length > L1_CODE_LENGTH)
+ l1_code_length = L1_CODE_LENGTH;
+ /* cannot complain as printk is not available as yet.
+ * But we can continue booting and complain later!
+ */
+
+ /* Copy _stext_l1 to _etext_l1 to L1 instruction SRAM */
+ dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length);
+
+ l1_data_a_length = _ebss_l1 - _sdata_l1;
+ if (l1_data_a_length > L1_DATA_A_LENGTH)
+ l1_data_a_length = L1_DATA_A_LENGTH;
+
+ /* Copy _sdata_l1 to _ebss_l1 to L1 data bank A SRAM */
+ dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length);
+
+ l1_data_b_length = _ebss_b_l1 - _sdata_b_l1;
+ if (l1_data_b_length > L1_DATA_B_LENGTH)
+ l1_data_b_length = L1_DATA_B_LENGTH;
+
+ /* Copy _sdata_b_l1 to _ebss_b_l1 to L1 data bank B SRAM */
+ dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
+ l1_data_a_length, l1_data_b_length);
+
+}
+
+/*
+ * Initial parsing of the command line. Currently, we support:
+ * - Controlling the linux memory size: mem=xxx[KMG]
+ * - Controlling the physical memory size: max_mem=xxx[KMG][$][#]
+ * $ -> reserved memory is dcacheable
+ * # -> reserved memory is icacheable
+ */
+static __init void parse_cmdline_early(char *cmdline_p)
+{
+ char c = ' ', *to = cmdline_p;
+ unsigned int memsize;
+ for (;;) {
+ if (c == ' ') {
+
+ if (!memcmp(to, "mem=", 4)) {
+ to += 4;
+ memsize = memparse(to, &to);
+ if (memsize)
+ _ramend = memsize;
+
+ } else if (!memcmp(to, "max_mem=", 8)) {
+ to += 8;
+ memsize = memparse(to, &to);
+ if (memsize) {
+ physical_mem_end = memsize;
+ if (*to != ' ') {
+ if (*to == '$'
+ || *(to + 1) == '$')
+ reserved_mem_dcache_on =
+ 1;
+ if (*to == '#'
+ || *(to + 1) == '#')
+ reserved_mem_icache_on =
+ 1;
+ }
+ }
+ }
+
+ }
+ c = *(to++);
+ if (!c)
+ break;
+ }
+}
+
+void __init setup_arch(char **cmdline_p)
+{
+ int bootmap_size;
+ unsigned long l1_length, sclk, cclk;
+#ifdef CONFIG_MTD_UCLINUX
+ unsigned long mtd_phys = 0;
+#endif
+
+ cclk = get_cclk();
+ sclk = get_sclk();
+
+#if !defined(CONFIG_BFIN_KERNEL_CLOCK) && defined(ANOMALY_05000273)
+ if (cclk == sclk)
+ panic("ANOMALY 05000273, SCLK can not be same as CCLK");
+#endif
+
+#if defined(ANOMALY_05000266)
+ bfin_read_IMDMA_D0_IRQ_STATUS();
+ bfin_read_IMDMA_D1_IRQ_STATUS();
+#endif
+
+#ifdef DEBUG_SERIAL_EARLY_INIT
+ bfin_console_init(); /* early console registration */
+ /* this give a chance to get printk() working before crash. */
+#endif
+
+#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
+ /* we need to initialize the Flashrom device here since we might
+ * do things with flash early on in the boot
+ */
+ flash_probe();
+#endif
+
+#if defined(CONFIG_CMDLINE_BOOL)
+ memset(command_line, 0, sizeof(command_line));
+ strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line));
+ command_line[sizeof(command_line) - 1] = 0;
+#endif
+
+ /* Keep a copy of command line */
+ *cmdline_p = &command_line[0];
+ memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+ boot_command_line[COMMAND_LINE_SIZE - 1] = 0;
+
+ /* setup memory defaults from the user config */
+ physical_mem_end = 0;
+ _ramend = CONFIG_MEM_SIZE * 1024 * 1024;
+
+ parse_cmdline_early(&command_line[0]);
+
+ if (physical_mem_end == 0)
+ physical_mem_end = _ramend;
+
+ /* by now the stack is part of the init task */
+ memory_end = _ramend - DMA_UNCACHED_REGION;
+
+ _ramstart = (unsigned long)__bss_stop;
+ memory_start = PAGE_ALIGN(_ramstart);
+
+#if defined(CONFIG_MTD_UCLINUX)
+ /* generic memory mapped MTD driver */
+ memory_mtd_end = memory_end;
+
+ mtd_phys = _ramstart;
+ mtd_size = PAGE_ALIGN(*((unsigned long *)(mtd_phys + 8)));
+
+# if defined(CONFIG_EXT2_FS) || defined(CONFIG_EXT3_FS)
+ if (*((unsigned short *)(mtd_phys + 0x438)) == EXT2_SUPER_MAGIC)
+ mtd_size =
+ PAGE_ALIGN(*((unsigned long *)(mtd_phys + 0x404)) << 10);
+# endif
+
+# if defined(CONFIG_CRAMFS)
+ if (*((unsigned long *)(mtd_phys)) == CRAMFS_MAGIC)
+ mtd_size = PAGE_ALIGN(*((unsigned long *)(mtd_phys + 0x4)));
+# endif
+
+# if defined(CONFIG_ROMFS_FS)
+ if (((unsigned long *)mtd_phys)[0] == ROMSB_WORD0
+ && ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1)
+ mtd_size =
+ PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2]));
+# if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
+ /* Due to a Hardware Anomaly we need to limit the size of usable
+ * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
+ * 05000263 - Hardware loop corrupted when taking an ICPLB exception
+ */
+# if (defined(CONFIG_DEBUG_HUNT_FOR_ZERO))
+ if (memory_end >= 56 * 1024 * 1024)
+ memory_end = 56 * 1024 * 1024;
+# else
+ if (memory_end >= 60 * 1024 * 1024)
+ memory_end = 60 * 1024 * 1024;
+# endif /* CONFIG_DEBUG_HUNT_FOR_ZERO */
+# endif /* ANOMALY_05000263 */
+# endif /* CONFIG_ROMFS_FS */
+
+ memory_end -= mtd_size;
+
+ if (mtd_size == 0) {
+ console_init();
+ panic("Don't boot kernel without rootfs attached.\n");
+ }
+
+ /* Relocate MTD image to the top of memory after the uncached memory area */
+ dma_memcpy((char *)memory_end, __bss_stop, mtd_size);
+
+ memory_mtd_start = memory_end;
+ _ebss = memory_mtd_start; /* define _ebss for compatible */
+#endif /* CONFIG_MTD_UCLINUX */
+
+#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
+ /* Due to a Hardware Anomaly we need to limit the size of usable
+ * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
+ * 05000263 - Hardware loop corrupted when taking an ICPLB exception
+ */
+#if (defined(CONFIG_DEBUG_HUNT_FOR_ZERO))
+ if (memory_end >= 56 * 1024 * 1024)
+ memory_end = 56 * 1024 * 1024;
+#else
+ if (memory_end >= 60 * 1024 * 1024)
+ memory_end = 60 * 1024 * 1024;
+#endif /* CONFIG_DEBUG_HUNT_FOR_ZERO */
+ printk(KERN_NOTICE "Warning: limiting memory to %liMB due to hardware anomaly 05000263\n", memory_end >> 20);
+#endif /* ANOMALY_05000263 */
+
+#if !defined(CONFIG_MTD_UCLINUX)
+ memory_end -= SIZE_4K; /*In case there is no valid CPLB behind memory_end make sure we don't get to close*/
+#endif
+ init_mm.start_code = (unsigned long)_stext;
+ init_mm.end_code = (unsigned long)_etext;
+ init_mm.end_data = (unsigned long)_edata;
+ init_mm.brk = (unsigned long)0;
+
+ init_leds();
+
+ printk(KERN_INFO "Blackfin support (C) 2004-2007 Analog Devices, Inc.\n");
+ printk(KERN_INFO "Compiled for ADSP-%s Rev 0.%d\n", CPU, bfin_compiled_revid());
+ if (bfin_revid() != bfin_compiled_revid())
+ printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n",
+ bfin_compiled_revid(), bfin_revid());
+ if (bfin_revid() < SUPPORTED_REVID)
+ printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n",
+ CPU, bfin_revid());
+ printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
+
+ printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu Mhz System Clock\n",
+ cclk / 1000000, sclk / 1000000);
+
+#if defined(ANOMALY_05000273)
+ if ((cclk >> 1) <= sclk)
+ printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n");
+#endif
+
+ printk(KERN_INFO "Board Memory: %ldMB\n", physical_mem_end >> 20);
+ printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
+
+ printk(KERN_INFO "Memory map:\n"
+ KERN_INFO " text = 0x%p-0x%p\n"
+ KERN_INFO " init = 0x%p-0x%p\n"
+ KERN_INFO " data = 0x%p-0x%p\n"
+ KERN_INFO " stack = 0x%p-0x%p\n"
+ KERN_INFO " bss = 0x%p-0x%p\n"
+ KERN_INFO " available = 0x%p-0x%p\n"
+#ifdef CONFIG_MTD_UCLINUX
+ KERN_INFO " rootfs = 0x%p-0x%p\n"
+#endif
+#if DMA_UNCACHED_REGION > 0
+ KERN_INFO " DMA Zone = 0x%p-0x%p\n"
+#endif
+ , _stext, _etext,
+ __init_begin, __init_end,
+ _sdata, _edata,
+ (void*)&init_thread_union, (void*)((int)(&init_thread_union) + 0x2000),
+ __bss_start, __bss_stop,
+ (void*)_ramstart, (void*)memory_end
+#ifdef CONFIG_MTD_UCLINUX
+ , (void*)memory_mtd_start, (void*)(memory_mtd_start + mtd_size)
+#endif
+#if DMA_UNCACHED_REGION > 0
+ , (void*)(_ramend - DMA_UNCACHED_REGION), (void*)(_ramend)
+#endif
+ );
+
+ /*
+ * give all the memory to the bootmap allocator, tell it to put the
+ * boot mem_map at the start of memory
+ */
+ bootmap_size = init_bootmem_node(NODE_DATA(0), memory_start >> PAGE_SHIFT, /* map goes here */
+ PAGE_OFFSET >> PAGE_SHIFT,
+ memory_end >> PAGE_SHIFT);
+ /*
+ * free the usable memory, we have to make sure we do not free
+ * the bootmem bitmap so we then reserve it after freeing it :-)
+ */
+ free_bootmem(memory_start, memory_end - memory_start);
+
+ reserve_bootmem(memory_start, bootmap_size);
+ /*
+ * get kmalloc into gear
+ */
+ paging_init();
+
+ /* check the size of the l1 area */
+ l1_length = _etext_l1 - _stext_l1;
+ if (l1_length > L1_CODE_LENGTH)
+ panic("L1 memory overflow\n");
+
+ l1_length = _ebss_l1 - _sdata_l1;
+ if (l1_length > L1_DATA_A_LENGTH)
+ panic("L1 memory overflow\n");
+
+ bf53x_cache_init();
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+# if defined(CONFIG_BFIN_SHARED_FLASH_ENET) && defined(CONFIG_BFIN533_STAMP)
+ /* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */
+ bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (1 << CONFIG_ENET_FLASH_PIN));
+ bfin_write_FIO_FLAG_S(1 << CONFIG_ENET_FLASH_PIN);
+ SSYNC();
+# endif
+# if defined (CONFIG_BFIN561_EZKIT)
+ bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 12));
+ SSYNC();
+# endif /* defined (CONFIG_BFIN561_EZKIT) */
+#endif
+
+ printk(KERN_INFO "Hardware Trace Enabled\n");
+ bfin_write_TBUFCTL(0x03);
+}
+
+#if defined(CONFIG_BF561)
+static struct cpu cpu[2];
+#else
+static struct cpu cpu[1];
+#endif
+static int __init topology_init(void)
+{
+#if defined (CONFIG_BF561)
+ register_cpu(&cpu[0], 0);
+ register_cpu(&cpu[1], 1);
+ return 0;
+#else
+ return register_cpu(cpu, 0);
+#endif
+}
+
+subsys_initcall(topology_init);
+
+#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
+u16 lock_kernel_check(u32 start, u32 end)
+{
+ if ((start <= (u32) _stext && end >= (u32) _end)
+ || (start >= (u32) _stext && end <= (u32) _end))
+ return IN_KERNEL;
+ return 0;
+}
+
+static unsigned short __init
+fill_cplbtab(struct cplb_tab *table,
+ unsigned long start, unsigned long end,
+ unsigned long block_size, unsigned long cplb_data)
+{
+ int i;
+
+ switch (block_size) {
+ case SIZE_4M:
+ i = 3;
+ break;
+ case SIZE_1M:
+ i = 2;
+ break;
+ case SIZE_4K:
+ i = 1;
+ break;
+ case SIZE_1K:
+ default:
+ i = 0;
+ break;
+ }
+
+ cplb_data = (cplb_data & ~(3 << 16)) | (i << 16);
+
+ while ((start < end) && (table->pos < table->size)) {
+
+ table->tab[table->pos++] = start;
+
+ if (lock_kernel_check(start, start + block_size) == IN_KERNEL)
+ table->tab[table->pos++] =
+ cplb_data | CPLB_LOCK | CPLB_DIRTY;
+ else
+ table->tab[table->pos++] = cplb_data;
+
+ start += block_size;
+ }
+ return 0;
+}
+
+static unsigned short __init
+close_cplbtab(struct cplb_tab *table)
+{
+
+ while (table->pos < table->size) {
+
+ table->tab[table->pos++] = 0;
+ table->tab[table->pos++] = 0; /* !CPLB_VALID */
+ }
+ return 0;
+}
+
+static void __init generate_cpl_tables(void)
+{
+
+ u16 i, j, process;
+ u32 a_start, a_end, as, ae, as_1m;
+
+ struct cplb_tab *t_i = NULL;
+ struct cplb_tab *t_d = NULL;
+ struct s_cplb cplb;
+
+ cplb.init_i.size = MAX_CPLBS;
+ cplb.init_d.size = MAX_CPLBS;
+ cplb.switch_i.size = MAX_SWITCH_I_CPLBS;
+ cplb.switch_d.size = MAX_SWITCH_D_CPLBS;
+
+ cplb.init_i.pos = 0;
+ cplb.init_d.pos = 0;
+ cplb.switch_i.pos = 0;
+ cplb.switch_d.pos = 0;
+
+ cplb.init_i.tab = icplb_table;
+ cplb.init_d.tab = dcplb_table;
+ cplb.switch_i.tab = ipdt_table;
+ cplb.switch_d.tab = dpdt_table;
+
+ cplb_data[SDRAM_KERN].end = memory_end;
+
+#ifdef CONFIG_MTD_UCLINUX
+ cplb_data[SDRAM_RAM_MTD].start = memory_mtd_start;
+ cplb_data[SDRAM_RAM_MTD].end = memory_mtd_start + mtd_size;
+ cplb_data[SDRAM_RAM_MTD].valid = mtd_size > 0;
+# if defined(CONFIG_ROMFS_FS)
+ cplb_data[SDRAM_RAM_MTD].attr |= I_CPLB;
+
+ /*
+ * The ROMFS_FS size is often not multiple of 1MB.
+ * This can cause multiple CPLB sets covering the same memory area.
+ * This will then cause multiple CPLB hit exceptions.
+ * Workaround: We ensure a contiguous memory area by extending the kernel
+ * memory section over the mtd section.
+ * For ROMFS_FS memory must be covered with ICPLBs anyways.
+ * So there is no difference between kernel and mtd memory setup.
+ */
+
+ cplb_data[SDRAM_KERN].end = memory_mtd_start + mtd_size;;
+ cplb_data[SDRAM_RAM_MTD].valid = 0;
+
+# endif
+#else
+ cplb_data[SDRAM_RAM_MTD].valid = 0;
+#endif
+
+ cplb_data[SDRAM_DMAZ].start = _ramend - DMA_UNCACHED_REGION;
+ cplb_data[SDRAM_DMAZ].end = _ramend;
+
+ cplb_data[RES_MEM].start = _ramend;
+ cplb_data[RES_MEM].end = physical_mem_end;
+
+ if (reserved_mem_dcache_on)
+ cplb_data[RES_MEM].d_conf = SDRAM_DGENERIC;
+ else
+ cplb_data[RES_MEM].d_conf = SDRAM_DNON_CHBL;
+
+ if (reserved_mem_icache_on)
+ cplb_data[RES_MEM].i_conf = SDRAM_IGENERIC;
+ else
+ cplb_data[RES_MEM].i_conf = SDRAM_INON_CHBL;
+
+ for (i = ZERO_P; i <= L2_MEM; i++) {
+
+ if (cplb_data[i].valid) {
+
+ as_1m = cplb_data[i].start % SIZE_1M;
+
+ /* We need to make sure all sections are properly 1M aligned
+ * However between Kernel Memory and the Kernel mtd section, depending on the
+ * rootfs size, there can be overlapping memory areas.
+ */
+
+ if (as_1m && i!=L1I_MEM && i!=L1D_MEM) {
+#ifdef CONFIG_MTD_UCLINUX
+ if (i == SDRAM_RAM_MTD) {
+ if ((cplb_data[SDRAM_KERN].end + 1) > cplb_data[SDRAM_RAM_MTD].start)
+ cplb_data[SDRAM_RAM_MTD].start = (cplb_data[i].start & (-2*SIZE_1M)) + SIZE_1M;
+ else
+ cplb_data[SDRAM_RAM_MTD].start = (cplb_data[i].start & (-2*SIZE_1M));
+ } else
+#endif
+ printk(KERN_WARNING "Unaligned Start of %s at 0x%X\n",
+ cplb_data[i].name, cplb_data[i].start);
+ }
+
+ as = cplb_data[i].start % SIZE_4M;
+ ae = cplb_data[i].end % SIZE_4M;
+
+ if (as)
+ a_start = cplb_data[i].start + (SIZE_4M - (as));
+ else
+ a_start = cplb_data[i].start;
+
+ a_end = cplb_data[i].end - ae;
+
+ for (j = INITIAL_T; j <= SWITCH_T; j++) {
+
+ switch (j) {
+ case INITIAL_T:
+ if (cplb_data[i].attr & INITIAL_T) {
+ t_i = &cplb.init_i;
+ t_d = &cplb.init_d;
+ process = 1;
+ } else
+ process = 0;
+ break;
+ case SWITCH_T:
+ if (cplb_data[i].attr & SWITCH_T) {
+ t_i = &cplb.switch_i;
+ t_d = &cplb.switch_d;
+ process = 1;
+ } else
+ process = 0;
+ break;
+ default:
+ process = 0;
+ break;
+ }
+
+ if (process) {
+ if (cplb_data[i].attr & I_CPLB) {
+
+ if (cplb_data[i].psize) {
+ fill_cplbtab(t_i,
+ cplb_data[i].start,
+ cplb_data[i].end,
+ cplb_data[i].psize,
+ cplb_data[i].i_conf);
+ } else {
+ /*icplb_table */
+#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
+ if (i == SDRAM_KERN) {
+ fill_cplbtab(t_i,
+ cplb_data[i].start,
+ cplb_data[i].end,
+ SIZE_4M,
+ cplb_data[i].i_conf);
+ } else
+#endif
+ {
+ fill_cplbtab(t_i,
+ cplb_data[i].start,
+ a_start,
+ SIZE_1M,
+ cplb_data[i].i_conf);
+ fill_cplbtab(t_i,
+ a_start,
+ a_end,
+ SIZE_4M,
+ cplb_data[i].i_conf);
+ fill_cplbtab(t_i, a_end,
+ cplb_data[i].end,
+ SIZE_1M,
+ cplb_data[i].i_conf);
+ }
+ }
+
+ }
+ if (cplb_data[i].attr & D_CPLB) {
+
+ if (cplb_data[i].psize) {
+ fill_cplbtab(t_d,
+ cplb_data[i].start,
+ cplb_data[i].end,
+ cplb_data[i].psize,
+ cplb_data[i].d_conf);
+ } else {
+/*dcplb_table*/
+ fill_cplbtab(t_d,
+ cplb_data[i].start,
+ a_start, SIZE_1M,
+ cplb_data[i].d_conf);
+ fill_cplbtab(t_d, a_start,
+ a_end, SIZE_4M,
+ cplb_data[i].d_conf);
+ fill_cplbtab(t_d, a_end,
+ cplb_data[i].end,
+ SIZE_1M,
+ cplb_data[i].d_conf);
+
+ }
+
+ }
+ }
+ }
+
+ }
+ }
+
+/* close tables */
+
+ close_cplbtab(&cplb.init_i);
+ close_cplbtab(&cplb.init_d);
+
+ cplb.init_i.tab[cplb.init_i.pos] = -1;
+ cplb.init_d.tab[cplb.init_d.pos] = -1;
+ cplb.switch_i.tab[cplb.switch_i.pos] = -1;
+ cplb.switch_d.tab[cplb.switch_d.pos] = -1;
+
+}
+
+#endif
+
+static inline u_long get_vco(void)
+{
+ u_long msel;
+ u_long vco;
+
+ msel = (bfin_read_PLL_CTL() >> 9) & 0x3F;
+ if (0 == msel)
+ msel = 64;
+
+ vco = CONFIG_CLKIN_HZ;
+ vco >>= (1 & bfin_read_PLL_CTL()); /* DF bit */
+ vco = msel * vco;
+ return vco;
+}
+
+/*Get the Core clock*/
+u_long get_cclk(void)
+{
+ u_long csel, ssel;
+ if (bfin_read_PLL_STAT() & 0x1)
+ return CONFIG_CLKIN_HZ;
+
+ ssel = bfin_read_PLL_DIV();
+ csel = ((ssel >> 4) & 0x03);
+ ssel &= 0xf;
+ if (ssel && ssel < (1 << csel)) /* SCLK > CCLK */
+ return get_vco() / ssel;
+ return get_vco() >> csel;
+}
+
+EXPORT_SYMBOL(get_cclk);
+
+/* Get the System clock */
+u_long get_sclk(void)
+{
+ u_long ssel;
+
+ if (bfin_read_PLL_STAT() & 0x1)
+ return CONFIG_CLKIN_HZ;
+
+ ssel = (bfin_read_PLL_DIV() & 0xf);
+ if (0 == ssel) {
+ printk(KERN_WARNING "Invalid System Clock\n");
+ ssel = 1;
+ }
+
+ return get_vco() / ssel;
+}
+
+EXPORT_SYMBOL(get_sclk);
+
+/*
+ * Get CPU information for use by the procfs.
+ */
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+ char *cpu, *mmu, *fpu, *name;
+ uint32_t revid;
+
+ u_long cclk = 0, sclk = 0;
+ u_int dcache_size = 0, dsup_banks = 0;
+
+ cpu = CPU;
+ mmu = "none";
+ fpu = "none";
+ revid = bfin_revid();
+ name = bfin_board_name;
+
+ cclk = get_cclk();
+ sclk = get_sclk();
+
+ seq_printf(m, "CPU:\t\tADSP-%s Rev. 0.%d\n"
+ "MMU:\t\t%s\n"
+ "FPU:\t\t%s\n"
+ "Core Clock:\t%9lu Hz\n"
+ "System Clock:\t%9lu Hz\n"
+ "BogoMips:\t%lu.%02lu\n"
+ "Calibration:\t%lu loops\n",
+ cpu, revid, mmu, fpu,
+ cclk,
+ sclk,
+ (loops_per_jiffy * HZ) / 500000,
+ ((loops_per_jiffy * HZ) / 5000) % 100,
+ (loops_per_jiffy * HZ));
+ seq_printf(m, "Board Name:\t%s\n", name);
+ seq_printf(m, "Board Memory:\t%ld MB\n", physical_mem_end >> 20);
+ seq_printf(m, "Kernel Memory:\t%ld MB\n", (unsigned long)_ramend >> 20);
+ if (bfin_read_IMEM_CONTROL() & (ENICPLB | IMC))
+ seq_printf(m, "I-CACHE:\tON\n");
+ else
+ seq_printf(m, "I-CACHE:\tOFF\n");
+ if ((bfin_read_DMEM_CONTROL()) & (ENDCPLB | DMC_ENABLE))
+ seq_printf(m, "D-CACHE:\tON"
+#if defined CONFIG_BLKFIN_WB
+ " (write-back)"
+#elif defined CONFIG_BLKFIN_WT
+ " (write-through)"
+#endif
+ "\n");
+ else
+ seq_printf(m, "D-CACHE:\tOFF\n");
+
+
+ switch(bfin_read_DMEM_CONTROL() & (1 << DMC0_P | 1 << DMC1_P)) {
+ case ACACHE_BSRAM:
+ seq_printf(m, "DBANK-A:\tCACHE\n" "DBANK-B:\tSRAM\n");
+ dcache_size = 16;
+ dsup_banks = 1;
+ break;
+ case ACACHE_BCACHE:
+ seq_printf(m, "DBANK-A:\tCACHE\n" "DBANK-B:\tCACHE\n");
+ dcache_size = 32;
+ dsup_banks = 2;
+ break;
+ case ASRAM_BSRAM:
+ seq_printf(m, "DBANK-A:\tSRAM\n" "DBANK-B:\tSRAM\n");
+ dcache_size = 0;
+ dsup_banks = 0;
+ break;
+ default:
+ break;
+ }
+
+
+ seq_printf(m, "I-CACHE Size:\t%dKB\n", BLKFIN_ICACHESIZE / 1024);
+ seq_printf(m, "D-CACHE Size:\t%dKB\n", dcache_size);
+ seq_printf(m, "I-CACHE Setup:\t%d Sub-banks/%d Ways, %d Lines/Way\n",
+ BLKFIN_ISUBBANKS, BLKFIN_IWAYS, BLKFIN_ILINES);
+ seq_printf(m,
+ "D-CACHE Setup:\t%d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n",
+ dsup_banks, BLKFIN_DSUBBANKS, BLKFIN_DWAYS,
+ BLKFIN_DLINES);
+#ifdef CONFIG_BLKFIN_CACHE_LOCK
+ switch (read_iloc()) {
+ case WAY0_L:
+ seq_printf(m, "Way0 Locked-Down\n");
+ break;
+ case WAY1_L:
+ seq_printf(m, "Way1 Locked-Down\n");
+ break;
+ case WAY01_L:
+ seq_printf(m, "Way0,Way1 Locked-Down\n");
+ break;
+ case WAY2_L:
+ seq_printf(m, "Way2 Locked-Down\n");
+ break;
+ case WAY02_L:
+ seq_printf(m, "Way0,Way2 Locked-Down\n");
+ break;
+ case WAY12_L:
+ seq_printf(m, "Way1,Way2 Locked-Down\n");
+ break;
+ case WAY012_L:
+ seq_printf(m, "Way0,Way1 & Way2 Locked-Down\n");
+ break;
+ case WAY3_L:
+ seq_printf(m, "Way3 Locked-Down\n");
+ break;
+ case WAY03_L:
+ seq_printf(m, "Way0,Way3 Locked-Down\n");
+ break;
+ case WAY13_L:
+ seq_printf(m, "Way1,Way3 Locked-Down\n");
+ break;
+ case WAY013_L:
+ seq_printf(m, "Way 0,Way1,Way3 Locked-Down\n");
+ break;
+ case WAY32_L:
+ seq_printf(m, "Way3,Way2 Locked-Down\n");
+ break;
+ case WAY320_L:
+ seq_printf(m, "Way3,Way2,Way0 Locked-Down\n");
+ break;
+ case WAY321_L:
+ seq_printf(m, "Way3,Way2,Way1 Locked-Down\n");
+ break;
+ case WAYALL_L:
+ seq_printf(m, "All Ways are locked\n");
+ break;
+ default:
+ seq_printf(m, "No Ways are locked\n");
+ }
+#endif
+ return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ return *pos < NR_CPUS ? ((void *)0x12345678) : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ ++*pos;
+ return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+struct seq_operations cpuinfo_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = show_cpuinfo,
+};
+
+void cmdline_init(unsigned long r0)
+{
+ if (r0)
+ strncpy(command_line, (char *)r0, COMMAND_LINE_SIZE);
+}
diff --git a/arch/blackfin/kernel/signal.c b/arch/blackfin/kernel/signal.c
new file mode 100644
index 000000000000..316e65c3439d
--- /dev/null
+++ b/arch/blackfin/kernel/signal.c
@@ -0,0 +1,356 @@
+/*
+ * File: arch/blackfin/kernel/signal.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/signal.h>
+#include <linux/syscalls.h>
+#include <linux/ptrace.h>
+#include <linux/tty.h>
+#include <linux/personality.h>
+#include <linux/binfmts.h>
+#include <linux/freezer.h>
+
+#include <asm/uaccess.h>
+#include <asm/cacheflush.h>
+#include <asm/ucontext.h>
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+struct fdpic_func_descriptor {
+ unsigned long text;
+ unsigned long GOT;
+};
+
+struct rt_sigframe {
+ int sig;
+ struct siginfo *pinfo;
+ void *puc;
+ char retcode[8];
+ struct siginfo info;
+ struct ucontext uc;
+};
+
+asmlinkage int sys_sigaltstack(const stack_t * uss, stack_t * uoss)
+{
+ return do_sigaltstack(uss, uoss, rdusp());
+}
+
+static inline int
+rt_restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc, int *pr0)
+{
+ unsigned long usp = 0;
+ int err = 0;
+
+#define RESTORE(x) err |= __get_user(regs->x, &sc->sc_##x)
+
+ /* restore passed registers */
+ RESTORE(r0); RESTORE(r1); RESTORE(r2); RESTORE(r3);
+ RESTORE(r4); RESTORE(r5); RESTORE(r6); RESTORE(r7);
+ RESTORE(p0); RESTORE(p1); RESTORE(p2); RESTORE(p3);
+ RESTORE(p4); RESTORE(p5);
+ err |= __get_user(usp, &sc->sc_usp);
+ wrusp(usp);
+ RESTORE(a0w); RESTORE(a1w);
+ RESTORE(a0x); RESTORE(a1x);
+ RESTORE(astat);
+ RESTORE(rets);
+ RESTORE(pc);
+ RESTORE(retx);
+ RESTORE(fp);
+ RESTORE(i0); RESTORE(i1); RESTORE(i2); RESTORE(i3);
+ RESTORE(m0); RESTORE(m1); RESTORE(m2); RESTORE(m3);
+ RESTORE(l0); RESTORE(l1); RESTORE(l2); RESTORE(l3);
+ RESTORE(b0); RESTORE(b1); RESTORE(b2); RESTORE(b3);
+ RESTORE(lc0); RESTORE(lc1);
+ RESTORE(lt0); RESTORE(lt1);
+ RESTORE(lb0); RESTORE(lb1);
+ RESTORE(seqstat);
+
+ regs->orig_p0 = -1; /* disable syscall checks */
+
+ *pr0 = regs->r0;
+ return err;
+}
+
+asmlinkage int do_rt_sigreturn(unsigned long __unused)
+{
+ struct pt_regs *regs = (struct pt_regs *)__unused;
+ unsigned long usp = rdusp();
+ struct rt_sigframe *frame = (struct rt_sigframe *)(usp);
+ sigset_t set;
+ int r0;
+
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+ if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+ goto badframe;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ spin_lock_irq(&current->sighand->siglock);
+ current->blocked = set;
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+
+ if (rt_restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
+ goto badframe;
+
+ if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->usp) == -EFAULT)
+ goto badframe;
+
+ return r0;
+
+ badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+static inline int rt_setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs)
+{
+ int err = 0;
+
+#define SETUP(x) err |= __put_user(regs->x, &sc->sc_##x)
+
+ SETUP(r0); SETUP(r1); SETUP(r2); SETUP(r3);
+ SETUP(r4); SETUP(r5); SETUP(r6); SETUP(r7);
+ SETUP(p0); SETUP(p1); SETUP(p2); SETUP(p3);
+ SETUP(p4); SETUP(p5);
+ err |= __put_user(rdusp(), &sc->sc_usp);
+ SETUP(a0w); SETUP(a1w);
+ SETUP(a0x); SETUP(a1x);
+ SETUP(astat);
+ SETUP(rets);
+ SETUP(pc);
+ SETUP(retx);
+ SETUP(fp);
+ SETUP(i0); SETUP(i1); SETUP(i2); SETUP(i3);
+ SETUP(m0); SETUP(m1); SETUP(m2); SETUP(m3);
+ SETUP(l0); SETUP(l1); SETUP(l2); SETUP(l3);
+ SETUP(b0); SETUP(b1); SETUP(b2); SETUP(b3);
+ SETUP(lc0); SETUP(lc1);
+ SETUP(lt0); SETUP(lt1);
+ SETUP(lb0); SETUP(lb1);
+ SETUP(seqstat);
+
+ return err;
+}
+
+static inline void push_cache(unsigned long vaddr, unsigned int len)
+{
+ flush_icache_range(vaddr, vaddr + len);
+}
+
+static inline void *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
+ size_t frame_size)
+{
+ unsigned long usp;
+
+ /* Default to using normal stack. */
+ usp = rdusp();
+
+ /* This is the X/Open sanctioned signal stack switching. */
+ if (ka->sa.sa_flags & SA_ONSTACK) {
+ if (!on_sig_stack(usp))
+ usp = current->sas_ss_sp + current->sas_ss_size;
+ }
+ return (void *)((usp - frame_size) & -8UL);
+}
+
+static int
+setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t * info,
+ sigset_t * set, struct pt_regs *regs)
+{
+ struct rt_sigframe *frame;
+ int err = 0;
+
+ frame = get_sigframe(ka, regs, sizeof(*frame));
+
+ err |= __put_user((current_thread_info()->exec_domain
+ && current_thread_info()->exec_domain->signal_invmap
+ && sig < 32
+ ? current_thread_info()->exec_domain->
+ signal_invmap[sig] : sig), &frame->sig);
+
+ err |= __put_user(&frame->info, &frame->pinfo);
+ err |= __put_user(&frame->uc, &frame->puc);
+ err |= copy_siginfo_to_user(&frame->info, info);
+
+ /* Create the ucontext. */
+ err |= __put_user(0, &frame->uc.uc_flags);
+ err |= __put_user(0, &frame->uc.uc_link);
+ err |=
+ __put_user((void *)current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
+ err |= __put_user(sas_ss_flags(rdusp()), &frame->uc.uc_stack.ss_flags);
+ err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
+ err |= rt_setup_sigcontext(&frame->uc.uc_mcontext, regs);
+ err |= copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+ /* Set up to return from userspace. */
+ err |= __put_user(0x28, &(frame->retcode[0]));
+ err |= __put_user(0xe1, &(frame->retcode[1]));
+ err |= __put_user(0xad, &(frame->retcode[2]));
+ err |= __put_user(0x00, &(frame->retcode[3]));
+ err |= __put_user(0xa0, &(frame->retcode[4]));
+ err |= __put_user(0x00, &(frame->retcode[5]));
+
+ if (err)
+ goto give_sigsegv;
+
+ push_cache((unsigned long)&frame->retcode, sizeof(frame->retcode));
+
+ /* Set up registers for signal handler */
+ wrusp((unsigned long)frame);
+ if (get_personality & FDPIC_FUNCPTRS) {
+ struct fdpic_func_descriptor __user *funcptr =
+ (struct fdpic_func_descriptor *) ka->sa.sa_handler;
+ __get_user(regs->pc, &funcptr->text);
+ __get_user(regs->p3, &funcptr->GOT);
+ } else
+ regs->pc = (unsigned long)ka->sa.sa_handler;
+ regs->rets = (unsigned long)(frame->retcode);
+
+ regs->r0 = frame->sig;
+ regs->r1 = (unsigned long)(&frame->info);
+ regs->r2 = (unsigned long)(&frame->uc);
+
+ return 0;
+
+ give_sigsegv:
+ if (sig == SIGSEGV)
+ ka->sa.sa_handler = SIG_DFL;
+ force_sig(SIGSEGV, current);
+ return -EFAULT;
+}
+
+static inline void
+handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
+{
+ switch (regs->r0) {
+ case -ERESTARTNOHAND:
+ if (!has_handler)
+ goto do_restart;
+ regs->r0 = -EINTR;
+ break;
+
+ case -ERESTARTSYS:
+ if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) {
+ regs->r0 = -EINTR;
+ break;
+ }
+ /* fallthrough */
+ case -ERESTARTNOINTR:
+ do_restart:
+ regs->p0 = regs->orig_p0;
+ regs->r0 = regs->orig_r0;
+ regs->pc -= 2;
+ break;
+ }
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+static int
+handle_signal(int sig, siginfo_t *info, struct k_sigaction *ka,
+ sigset_t *oldset, struct pt_regs *regs)
+{
+ int ret;
+
+ /* are we from a system call? to see pt_regs->orig_p0 */
+ if (regs->orig_p0 >= 0)
+ /* If so, check system call restarting.. */
+ handle_restart(regs, ka, 1);
+
+ /* set up the stack frame */
+ ret = setup_rt_frame(sig, ka, info, oldset, regs);
+
+ if (ret == 0) {
+ spin_lock_irq(&current->sighand->siglock);
+ sigorsets(&current->blocked, &current->blocked,
+ &ka->sa.sa_mask);
+ if (!(ka->sa.sa_flags & SA_NODEFER))
+ sigaddset(&current->blocked, sig);
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+ }
+ return ret;
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Note that we go through the signals twice: once to check the signals
+ * that the kernel can handle, and then we build all the user-level signal
+ * handling stack-frames in one go after that.
+ */
+asmlinkage void do_signal(struct pt_regs *regs)
+{
+ siginfo_t info;
+ int signr;
+ struct k_sigaction ka;
+ sigset_t *oldset;
+
+ current->thread.esp0 = (unsigned long)regs;
+
+ if (try_to_freeze())
+ goto no_signal;
+
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ oldset = &current->saved_sigmask;
+ else
+ oldset = &current->blocked;
+
+ signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+ if (signr > 0) {
+ /* Whee! Actually deliver the signal. */
+ if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
+ /* a signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TIF_RESTORE_SIGMASK flag */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ }
+
+ return;
+ }
+
+no_signal:
+ /* Did we come from a system call? */
+ if (regs->orig_p0 >= 0)
+ /* Restart the system call - no handlers present */
+ handle_restart(regs, NULL, 0);
+
+ /* if there's no signal to deliver, we just put the saved sigmask
+ * back */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+ }
+}
diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c
new file mode 100644
index 000000000000..f436e6743f5a
--- /dev/null
+++ b/arch/blackfin/kernel/sys_bfin.c
@@ -0,0 +1,115 @@
+/*
+ * File: arch/blackfin/kernel/sys_bfin.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: This file contains various random system calls that
+ * have a non-standard calling sequence on the Linux/bfin
+ * platform.
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/smp_lock.h>
+#include <linux/spinlock.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/shm.h>
+#include <linux/syscalls.h>
+#include <linux/mman.h>
+#include <linux/file.h>
+
+#include <asm/cacheflush.h>
+#include <asm/uaccess.h>
+#include <asm/ipc.h>
+#include <asm/dma.h>
+#include <asm/unistd.h>
+
+/*
+ * sys_pipe() is the normal C calling standard for creating
+ * a pipe. It's not the way unix traditionally does this, though.
+ */
+asmlinkage int sys_pipe(unsigned long *fildes)
+{
+ int fd[2];
+ int error;
+
+ error = do_pipe(fd);
+ if (!error) {
+ if (copy_to_user(fildes, fd, 2 * sizeof(int)))
+ error = -EFAULT;
+ }
+ return error;
+}
+
+/* common code for old and new mmaps */
+static inline long
+do_mmap2(unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long pgoff)
+{
+ int error = -EBADF;
+ struct file *file = NULL;
+
+ flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+ if (!(flags & MAP_ANONYMOUS)) {
+ file = fget(fd);
+ if (!file)
+ goto out;
+ }
+
+ down_write(&current->mm->mmap_sem);
+ error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
+ up_write(&current->mm->mmap_sem);
+
+ if (file)
+ fput(file);
+ out:
+ return error;
+}
+
+asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long pgoff)
+{
+ return do_mmap2(addr, len, prot, flags, fd, pgoff);
+}
+
+asmlinkage int sys_getpagesize(void)
+{
+ return PAGE_SIZE;
+}
+
+asmlinkage void *sys_sram_alloc(size_t size, unsigned long flags)
+{
+ return sram_alloc_with_lsl(size, flags);
+}
+
+asmlinkage int sys_sram_free(const void *addr)
+{
+ return sram_free_with_lsl(addr);
+}
+
+asmlinkage void *sys_dma_memcpy(void *dest, const void *src, size_t len)
+{
+ return safe_dma_memcpy(dest, src, len);
+}
diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c
new file mode 100644
index 000000000000..f578176b6d92
--- /dev/null
+++ b/arch/blackfin/kernel/time.c
@@ -0,0 +1,326 @@
+/*
+ * File: arch/blackfin/kernel/time.c
+ * Based on: none - original work
+ * Author:
+ *
+ * Created:
+ * Description: This file contains the bfin-specific time handling details.
+ * Most of the stuff is located in the machine specific files.
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/profile.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/irq.h>
+
+#include <asm/blackfin.h>
+
+/* This is an NTP setting */
+#define TICK_SIZE (tick_nsec / 1000)
+
+static void time_sched_init(irqreturn_t(*timer_routine)
+ (int, void *));
+static unsigned long gettimeoffset(void);
+static inline void do_leds(void);
+
+#if (defined(CONFIG_BFIN_ALIVE_LED) || defined(CONFIG_BFIN_IDLE_LED))
+void __init init_leds(void)
+{
+ unsigned int tmp = 0;
+
+#if defined(CONFIG_BFIN_ALIVE_LED)
+ /* config pins as output. */
+ tmp = bfin_read_CONFIG_BFIN_ALIVE_LED_DPORT();
+ SSYNC();
+ bfin_write_CONFIG_BFIN_ALIVE_LED_DPORT(tmp | CONFIG_BFIN_ALIVE_LED_PIN);
+ SSYNC();
+
+ /* First set led be off */
+ tmp = bfin_read_CONFIG_BFIN_ALIVE_LED_PORT();
+ SSYNC();
+ bfin_write_CONFIG_BFIN_ALIVE_LED_PORT(tmp | CONFIG_BFIN_ALIVE_LED_PIN); /* light off */
+ SSYNC();
+#endif
+
+#if defined(CONFIG_BFIN_IDLE_LED)
+ /* config pins as output. */
+ tmp = bfin_read_CONFIG_BFIN_IDLE_LED_DPORT();
+ SSYNC();
+ bfin_write_CONFIG_BFIN_IDLE_LED_DPORT(tmp | CONFIG_BFIN_IDLE_LED_PIN);
+ SSYNC();
+
+ /* First set led be off */
+ tmp = bfin_read_CONFIG_BFIN_IDLE_LED_PORT();
+ SSYNC();
+ bfin_write_CONFIG_BFIN_IDLE_LED_PORT(tmp | CONFIG_BFIN_IDLE_LED_PIN); /* light off */
+ SSYNC();
+#endif
+}
+#else
+void __init init_leds(void)
+{
+}
+#endif
+
+#if defined(CONFIG_BFIN_ALIVE_LED)
+static inline void do_leds(void)
+{
+ static unsigned int count = 50;
+ static int flag = 0;
+ unsigned short tmp = 0;
+
+ if (--count == 0) {
+ count = 50;
+ flag = ~flag;
+ }
+ tmp = bfin_read_CONFIG_BFIN_ALIVE_LED_PORT();
+ SSYNC();
+
+ if (flag)
+ tmp &= ~CONFIG_BFIN_ALIVE_LED_PIN; /* light on */
+ else
+ tmp |= CONFIG_BFIN_ALIVE_LED_PIN; /* light off */
+
+ bfin_write_CONFIG_BFIN_ALIVE_LED_PORT(tmp);
+ SSYNC();
+
+}
+#else
+static inline void do_leds(void)
+{
+}
+#endif
+
+static struct irqaction bfin_timer_irq = {
+ .name = "BFIN Timer Tick",
+ .flags = IRQF_DISABLED
+};
+
+/*
+ * The way that the Blackfin core timer works is:
+ * - CCLK is divided by a programmable 8-bit pre-scaler (TSCALE)
+ * - Every time TSCALE ticks, a 32bit is counted down (TCOUNT)
+ *
+ * If you take the fastest clock (1ns, or 1GHz to make the math work easier)
+ * 10ms is 10,000,000 clock ticks, which fits easy into a 32-bit counter
+ * (32 bit counter is 4,294,967,296ns or 4.2 seconds) so, we don't need
+ * to use TSCALE, and program it to zero (which is pass CCLK through).
+ * If you feel like using it, try to keep HZ * TIMESCALE to some
+ * value that divides easy (like power of 2).
+ */
+
+#define TIME_SCALE 1
+
+static void
+time_sched_init(irqreturn_t(*timer_routine) (int, void *))
+{
+ u32 tcount;
+
+ /* power up the timer, but don't enable it just yet */
+ bfin_write_TCNTL(1);
+ CSYNC();
+
+ /*
+ * the TSCALE prescaler counter.
+ */
+ bfin_write_TSCALE((TIME_SCALE - 1));
+
+ tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1);
+ bfin_write_TPERIOD(tcount);
+ bfin_write_TCOUNT(tcount);
+
+ /* now enable the timer */
+ CSYNC();
+
+ bfin_write_TCNTL(7);
+
+ bfin_timer_irq.handler = (irq_handler_t)timer_routine;
+ /* call setup_irq instead of request_irq because request_irq calls
+ * kmalloc which has not been initialized yet
+ */
+ setup_irq(IRQ_CORETMR, &bfin_timer_irq);
+}
+
+/*
+ * Should return useconds since last timer tick
+ */
+static unsigned long gettimeoffset(void)
+{
+ unsigned long offset;
+ unsigned long clocks_per_jiffy;
+
+ clocks_per_jiffy = bfin_read_TPERIOD();
+ offset =
+ (clocks_per_jiffy -
+ bfin_read_TCOUNT()) / (((clocks_per_jiffy + 1) * HZ) /
+ USEC_PER_SEC);
+
+ /* Check if we just wrapped the counters and maybe missed a tick */
+ if ((bfin_read_ILAT() & (1 << IRQ_CORETMR))
+ && (offset < (100000 / HZ / 2)))
+ offset += (USEC_PER_SEC / HZ);
+
+ return offset;
+}
+
+static inline int set_rtc_mmss(unsigned long nowtime)
+{
+ return 0;
+}
+
+/*
+ * timer_interrupt() needs to keep up the real-time clock,
+ * as well as call the "do_timer()" routine every clocktick
+ */
+#ifdef CONFIG_CORE_TIMER_IRQ_L1
+irqreturn_t timer_interrupt(int irq, void *dummy)__attribute__((l1_text));
+#endif
+
+irqreturn_t timer_interrupt(int irq, void *dummy)
+{
+ /* last time the cmos clock got updated */
+ static long last_rtc_update = 0;
+
+ write_seqlock(&xtime_lock);
+
+ do_timer(1);
+ do_leds();
+
+#ifndef CONFIG_SMP
+ update_process_times(user_mode(get_irq_regs()));
+#endif
+ profile_tick(CPU_PROFILING);
+
+ /*
+ * If we have an externally synchronized Linux clock, then update
+ * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
+ * called as close as possible to 500 ms before the new second starts.
+ */
+
+ if (ntp_synced() &&
+ xtime.tv_sec > last_rtc_update + 660 &&
+ (xtime.tv_nsec / NSEC_PER_USEC) >=
+ 500000 - ((unsigned)TICK_SIZE) / 2
+ && (xtime.tv_nsec / NSEC_PER_USEC) <=
+ 500000 + ((unsigned)TICK_SIZE) / 2) {
+ if (set_rtc_mmss(xtime.tv_sec) == 0)
+ last_rtc_update = xtime.tv_sec;
+ else
+ /* Do it again in 60s. */
+ last_rtc_update = xtime.tv_sec - 600;
+ }
+ write_sequnlock(&xtime_lock);
+ return IRQ_HANDLED;
+}
+
+void __init time_init(void)
+{
+ time_t secs_since_1970 = (365 * 37 + 9) * 24 * 60 * 60; /* 1 Jan 2007 */
+
+#ifdef CONFIG_RTC_DRV_BFIN
+ /* [#2663] hack to filter junk RTC values that would cause
+ * userspace to have to deal with time values greater than
+ * 2^31 seconds (which uClibc cannot cope with yet)
+ */
+ if ((bfin_read_RTC_STAT() & 0xC0000000) == 0xC0000000) {
+ printk(KERN_NOTICE "bfin-rtc: invalid date; resetting\n");
+ bfin_write_RTC_STAT(0);
+ }
+#endif
+
+ /* Initialize xtime. From now on, xtime is updated with timer interrupts */
+ xtime.tv_sec = secs_since_1970;
+ xtime.tv_nsec = 0;
+
+ wall_to_monotonic.tv_sec = -xtime.tv_sec;
+
+ time_sched_init(timer_interrupt);
+}
+
+#ifndef CONFIG_GENERIC_TIME
+void do_gettimeofday(struct timeval *tv)
+{
+ unsigned long flags;
+ unsigned long seq;
+ unsigned long usec, sec;
+
+ do {
+ seq = read_seqbegin_irqsave(&xtime_lock, flags);
+ usec = gettimeoffset();
+ sec = xtime.tv_sec;
+ usec += (xtime.tv_nsec / NSEC_PER_USEC);
+ }
+ while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
+
+ while (usec >= USEC_PER_SEC) {
+ usec -= USEC_PER_SEC;
+ sec++;
+ }
+
+ tv->tv_sec = sec;
+ tv->tv_usec = usec;
+}
+EXPORT_SYMBOL(do_gettimeofday);
+
+int do_settimeofday(struct timespec *tv)
+{
+ time_t wtm_sec, sec = tv->tv_sec;
+ long wtm_nsec, nsec = tv->tv_nsec;
+
+ if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
+ return -EINVAL;
+
+ write_seqlock_irq(&xtime_lock);
+ /*
+ * This is revolting. We need to set the xtime.tv_usec
+ * correctly. However, the value in this location is
+ * is value at the last tick.
+ * Discover what correction gettimeofday
+ * would have done, and then undo it!
+ */
+ nsec -= (gettimeoffset() * NSEC_PER_USEC);
+
+ wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
+ wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
+
+ set_normalized_timespec(&xtime, sec, nsec);
+ set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
+
+ ntp_clear();
+
+ write_sequnlock_irq(&xtime_lock);
+ clock_was_set();
+
+ return 0;
+}
+EXPORT_SYMBOL(do_settimeofday);
+#endif /* !CONFIG_GENERIC_TIME */
+
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ */
+unsigned long long sched_clock(void)
+{
+ return (unsigned long long)jiffies *(NSEC_PER_SEC / HZ);
+}
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
new file mode 100644
index 000000000000..9556b73de808
--- /dev/null
+++ b/arch/blackfin/kernel/traps.c
@@ -0,0 +1,649 @@
+/*
+ * File: arch/blackfin/kernel/traps.c
+ * Based on:
+ * Author: Hamish Macdonald
+ *
+ * Created:
+ * Description: uses S/W interrupt 15 for the system calls
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <asm/uaccess.h>
+#include <asm/traps.h>
+#include <asm/cacheflush.h>
+#include <asm/blackfin.h>
+#include <asm/uaccess.h>
+#include <asm/irq_handler.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/kallsyms.h>
+
+#ifdef CONFIG_KGDB
+# include <linux/debugger.h>
+# include <linux/kgdb.h>
+#endif
+
+/* Initiate the event table handler */
+void __init trap_init(void)
+{
+ CSYNC();
+ bfin_write_EVT3(trap);
+ CSYNC();
+}
+
+asmlinkage void trap_c(struct pt_regs *fp);
+
+int kstack_depth_to_print = 48;
+
+static int printk_address(unsigned long address)
+{
+ struct vm_list_struct *vml;
+ struct task_struct *p;
+ struct mm_struct *mm;
+
+#ifdef CONFIG_KALLSYMS
+ unsigned long offset = 0, symsize;
+ const char *symname;
+ char *modname;
+ char *delim = ":";
+ char namebuf[128];
+
+ /* look up the address and see if we are in kernel space */
+ symname = kallsyms_lookup(address, &symsize, &offset, &modname, namebuf);
+
+ if (symname) {
+ /* yeah! kernel space! */
+ if (!modname)
+ modname = delim = "";
+ return printk("<0x%p> { %s%s%s%s + 0x%lx }",
+ (void*)address, delim, modname, delim, symname,
+ (unsigned long)offset);
+
+ }
+#endif
+
+ /* looks like we're off in user-land, so let's walk all the
+ * mappings of all our processes and see if we can't be a whee
+ * bit more specific
+ */
+ write_lock_irq(&tasklist_lock);
+ for_each_process(p) {
+ mm = get_task_mm(p);
+ if (!mm)
+ continue;
+
+ vml = mm->context.vmlist;
+ while (vml) {
+ struct vm_area_struct *vma = vml->vma;
+
+ if (address >= vma->vm_start && address < vma->vm_end) {
+ char *name = p->comm;
+ struct file *file = vma->vm_file;
+ if (file) {
+ char _tmpbuf[256];
+ name = d_path(file->f_dentry,
+ file->f_vfsmnt,
+ _tmpbuf,
+ sizeof(_tmpbuf));
+ }
+
+ write_unlock_irq(&tasklist_lock);
+ return printk("<0x%p> [ %s + 0x%lx ]",
+ (void*)address, name,
+ (unsigned long)
+ ((address - vma->vm_start) +
+ (vma->vm_pgoff << PAGE_SHIFT)));
+ }
+
+ vml = vml->next;
+ }
+ }
+ write_unlock_irq(&tasklist_lock);
+
+ /* we were unable to find this address anywhere */
+ return printk("[<0x%p>]", (void*)address);
+}
+
+#define trace_buffer_save(x) \
+ do { \
+ (x) = bfin_read_TBUFCTL(); \
+ bfin_write_TBUFCTL((x) & ~TBUFEN); \
+ } while (0)
+#define trace_buffer_restore(x) \
+ do { \
+ bfin_write_TBUFCTL((x)); \
+ } while (0)
+
+asmlinkage void trap_c(struct pt_regs *fp)
+{
+ int j, sig = 0;
+ siginfo_t info;
+ unsigned long trapnr = fp->seqstat & SEQSTAT_EXCAUSE;
+
+#ifdef CONFIG_KGDB
+# define CHK_DEBUGGER_TRAP() do { CHK_DEBUGGER(trapnr, sig, info.si_code, fp,); } while (0)
+# define CHK_DEBUGGER_TRAP_MAYBE() do { if (kgdb_connected) CHK_DEBUGGER_TRAP(); } while (0)
+#else
+# define CHK_DEBUGGER_TRAP() do { } while (0)
+# define CHK_DEBUGGER_TRAP_MAYBE() do { } while (0)
+#endif
+
+ trace_buffer_save(j);
+
+ /* trap_c() will be called for exceptions. During exceptions
+ * processing, the pc value should be set with retx value.
+ * With this change we can cleanup some code in signal.c- TODO
+ */
+ fp->orig_pc = fp->retx;
+ /* printk("exception: 0x%x, ipend=%x, reti=%x, retx=%x\n",
+ trapnr, fp->ipend, fp->pc, fp->retx); */
+
+ /* send the appropriate signal to the user program */
+ switch (trapnr) {
+
+ /* This table works in conjuction with the one in ./mach-common/entry.S
+ * Some exceptions are handled there (in assembly, in exception space)
+ * Some are handled here, (in C, in interrupt space)
+ * Some, like CPLB, are handled in both, where the normal path is
+ * handled in assembly/exception space, and the error path is handled
+ * here
+ */
+
+ /* 0x00 - Linux Syscall, getting here is an error */
+ /* 0x01 - userspace gdb breakpoint, handled here */
+ case VEC_EXCPT01:
+ info.si_code = TRAP_ILLTRAP;
+ sig = SIGTRAP;
+ CHK_DEBUGGER_TRAP_MAYBE();
+ /* Check if this is a breakpoint in kernel space */
+ if (fp->ipend & 0xffc0)
+ return;
+ else
+ break;
+#ifdef CONFIG_KGDB
+ case VEC_EXCPT02 : /* gdb connection */
+ info.si_code = TRAP_ILLTRAP;
+ sig = SIGTRAP;
+ CHK_DEBUGGER_TRAP();
+ return;
+#else
+ /* 0x02 - User Defined, Caught by default */
+#endif
+ /* 0x03 - Atomic test and set */
+ case VEC_EXCPT03:
+ info.si_code = SEGV_STACKFLOW;
+ sig = SIGSEGV;
+ printk(KERN_EMERG EXC_0x03);
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x04 - spinlock - handled by _ex_spinlock,
+ getting here is an error */
+ /* 0x05 - User Defined, Caught by default */
+ /* 0x06 - User Defined, Caught by default */
+ /* 0x07 - User Defined, Caught by default */
+ /* 0x08 - User Defined, Caught by default */
+ /* 0x09 - User Defined, Caught by default */
+ /* 0x0A - User Defined, Caught by default */
+ /* 0x0B - User Defined, Caught by default */
+ /* 0x0C - User Defined, Caught by default */
+ /* 0x0D - User Defined, Caught by default */
+ /* 0x0E - User Defined, Caught by default */
+ /* 0x0F - User Defined, Caught by default */
+ /* 0x10 HW Single step, handled here */
+ case VEC_STEP:
+ info.si_code = TRAP_STEP;
+ sig = SIGTRAP;
+ CHK_DEBUGGER_TRAP_MAYBE();
+ /* Check if this is a single step in kernel space */
+ if (fp->ipend & 0xffc0)
+ return;
+ else
+ break;
+ /* 0x11 - Trace Buffer Full, handled here */
+ case VEC_OVFLOW:
+ info.si_code = TRAP_TRACEFLOW;
+ sig = SIGTRAP;
+ printk(KERN_EMERG EXC_0x11);
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x12 - Reserved, Caught by default */
+ /* 0x13 - Reserved, Caught by default */
+ /* 0x14 - Reserved, Caught by default */
+ /* 0x15 - Reserved, Caught by default */
+ /* 0x16 - Reserved, Caught by default */
+ /* 0x17 - Reserved, Caught by default */
+ /* 0x18 - Reserved, Caught by default */
+ /* 0x19 - Reserved, Caught by default */
+ /* 0x1A - Reserved, Caught by default */
+ /* 0x1B - Reserved, Caught by default */
+ /* 0x1C - Reserved, Caught by default */
+ /* 0x1D - Reserved, Caught by default */
+ /* 0x1E - Reserved, Caught by default */
+ /* 0x1F - Reserved, Caught by default */
+ /* 0x20 - Reserved, Caught by default */
+ /* 0x21 - Undefined Instruction, handled here */
+ case VEC_UNDEF_I:
+ info.si_code = ILL_ILLOPC;
+ sig = SIGILL;
+ printk(KERN_EMERG EXC_0x21);
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x22 - Illegal Instruction Combination, handled here */
+ case VEC_ILGAL_I:
+ info.si_code = ILL_ILLPARAOP;
+ sig = SIGILL;
+ printk(KERN_EMERG EXC_0x22);
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x23 - Data CPLB Protection Violation,
+ normal case is handled in _cplb_hdr */
+ case VEC_CPLB_VL:
+ info.si_code = ILL_CPLB_VI;
+ sig = SIGILL;
+ printk(KERN_EMERG EXC_0x23);
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x24 - Data access misaligned, handled here */
+ case VEC_MISALI_D:
+ info.si_code = BUS_ADRALN;
+ sig = SIGBUS;
+ printk(KERN_EMERG EXC_0x24);
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x25 - Unrecoverable Event, handled here */
+ case VEC_UNCOV:
+ info.si_code = ILL_ILLEXCPT;
+ sig = SIGILL;
+ printk(KERN_EMERG EXC_0x25);
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x26 - Data CPLB Miss, normal case is handled in _cplb_hdr,
+ error case is handled here */
+ case VEC_CPLB_M:
+ info.si_code = BUS_ADRALN;
+ sig = SIGBUS;
+ printk(KERN_EMERG EXC_0x26);
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */
+ case VEC_CPLB_MHIT:
+ info.si_code = ILL_CPLB_MULHIT;
+#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
+ sig = SIGSEGV;
+ printk(KERN_EMERG "\n\nNULL pointer access (probably)\n");
+#else
+ sig = SIGILL;
+ printk(KERN_EMERG EXC_0x27);
+#endif
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x28 - Emulation Watchpoint, handled here */
+ case VEC_WATCH:
+ info.si_code = TRAP_WATCHPT;
+ sig = SIGTRAP;
+ pr_debug(EXC_0x28);
+ CHK_DEBUGGER_TRAP_MAYBE();
+ /* Check if this is a watchpoint in kernel space */
+ if (fp->ipend & 0xffc0)
+ return;
+ else
+ break;
+#ifdef CONFIG_BF535
+ /* 0x29 - Instruction fetch access error (535 only) */
+ case VEC_ISTRU_VL: /* ADSP-BF535 only (MH) */
+ info.si_code = BUS_OPFETCH;
+ sig = SIGBUS;
+ printk(KERN_EMERG "BF535: VEC_ISTRU_VL\n");
+ CHK_DEBUGGER_TRAP();
+ break;
+#else
+ /* 0x29 - Reserved, Caught by default */
+#endif
+ /* 0x2A - Instruction fetch misaligned, handled here */
+ case VEC_MISALI_I:
+ info.si_code = BUS_ADRALN;
+ sig = SIGBUS;
+ printk(KERN_EMERG EXC_0x2A);
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x2B - Instruction CPLB protection Violation,
+ handled in _cplb_hdr */
+ case VEC_CPLB_I_VL:
+ info.si_code = ILL_CPLB_VI;
+ sig = SIGILL;
+ printk(KERN_EMERG EXC_0x2B);
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x2C - Instruction CPLB miss, handled in _cplb_hdr */
+ case VEC_CPLB_I_M:
+ info.si_code = ILL_CPLB_MISS;
+ sig = SIGBUS;
+ printk(KERN_EMERG EXC_0x2C);
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x2D - Instruction CPLB Multiple Hits, handled here */
+ case VEC_CPLB_I_MHIT:
+ info.si_code = ILL_CPLB_MULHIT;
+#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
+ sig = SIGSEGV;
+ printk(KERN_EMERG "\n\nJump to address 0 - 0x0fff\n");
+#else
+ sig = SIGILL;
+ printk(KERN_EMERG EXC_0x2D);
+#endif
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x2E - Illegal use of Supervisor Resource, handled here */
+ case VEC_ILL_RES:
+ info.si_code = ILL_PRVOPC;
+ sig = SIGILL;
+ printk(KERN_EMERG EXC_0x2E);
+ CHK_DEBUGGER_TRAP();
+ break;
+ /* 0x2F - Reserved, Caught by default */
+ /* 0x30 - Reserved, Caught by default */
+ /* 0x31 - Reserved, Caught by default */
+ /* 0x32 - Reserved, Caught by default */
+ /* 0x33 - Reserved, Caught by default */
+ /* 0x34 - Reserved, Caught by default */
+ /* 0x35 - Reserved, Caught by default */
+ /* 0x36 - Reserved, Caught by default */
+ /* 0x37 - Reserved, Caught by default */
+ /* 0x38 - Reserved, Caught by default */
+ /* 0x39 - Reserved, Caught by default */
+ /* 0x3A - Reserved, Caught by default */
+ /* 0x3B - Reserved, Caught by default */
+ /* 0x3C - Reserved, Caught by default */
+ /* 0x3D - Reserved, Caught by default */
+ /* 0x3E - Reserved, Caught by default */
+ /* 0x3F - Reserved, Caught by default */
+ default:
+ info.si_code = TRAP_ILLTRAP;
+ sig = SIGTRAP;
+ printk(KERN_EMERG "Caught Unhandled Exception, code = %08lx\n",
+ (fp->seqstat & SEQSTAT_EXCAUSE));
+ CHK_DEBUGGER_TRAP();
+ break;
+ }
+
+ info.si_signo = sig;
+ info.si_errno = 0;
+ info.si_addr = (void *)fp->pc;
+ force_sig_info(sig, &info, current);
+ if (sig != 0 && sig != SIGTRAP) {
+ unsigned long stack;
+ dump_bfin_regs(fp, (void *)fp->retx);
+ dump_bfin_trace_buffer();
+ show_stack(current, &stack);
+ if (current->mm == NULL)
+ panic("Kernel exception");
+ }
+
+ /* if the address that we are about to return to is not valid, set it
+ * to a valid address, if we have a current application or panic
+ */
+ if (!(fp->pc <= physical_mem_end
+#if L1_CODE_LENGTH != 0
+ || (fp->pc >= L1_CODE_START &&
+ fp->pc <= (L1_CODE_START + L1_CODE_LENGTH))
+#endif
+ )) {
+ if (current->mm) {
+ fp->pc = current->mm->start_code;
+ } else {
+ printk(KERN_EMERG "I can't return to memory that doesn't exist - bad things happen\n");
+ panic("Help - I've fallen and can't get up\n");
+ }
+ }
+
+ trace_buffer_restore(j);
+ return;
+}
+
+/* Typical exception handling routines */
+
+void dump_bfin_trace_buffer(void)
+{
+ int tflags;
+ trace_buffer_save(tflags);
+
+ if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
+ int i;
+ printk(KERN_EMERG "Hardware Trace:\n");
+ for (i = 0; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
+ printk(KERN_EMERG "%2i Target : ", i);
+ printk_address((unsigned long)bfin_read_TBUF());
+ printk("\n" KERN_EMERG " Source : ");
+ printk_address((unsigned long)bfin_read_TBUF());
+ printk("\n");
+ }
+ }
+
+ trace_buffer_restore(tflags);
+}
+EXPORT_SYMBOL(dump_bfin_trace_buffer);
+
+static void show_trace(struct task_struct *tsk, unsigned long *sp)
+{
+ unsigned long addr;
+
+ printk("\nCall Trace:");
+#ifdef CONFIG_KALLSYMS
+ printk("\n");
+#endif
+
+ while (!kstack_end(sp)) {
+ addr = *sp++;
+ /*
+ * If the address is either in the text segment of the
+ * kernel, or in the region which contains vmalloc'ed
+ * memory, it *may* be the address of a calling
+ * routine; if so, print it so that someone tracing
+ * down the cause of the crash will be able to figure
+ * out the call path that was taken.
+ */
+ if (kernel_text_address(addr))
+ print_ip_sym(addr);
+ }
+
+ printk("\n");
+}
+
+void show_stack(struct task_struct *task, unsigned long *stack)
+{
+ unsigned long *endstack, addr;
+ int i;
+
+ /* Cannot call dump_bfin_trace_buffer() here as show_stack() is
+ * called externally in some places in the kernel.
+ */
+
+ if (!stack) {
+ if (task)
+ stack = (unsigned long *)task->thread.ksp;
+ else
+ stack = (unsigned long *)&stack;
+ }
+
+ addr = (unsigned long)stack;
+ endstack = (unsigned long *)PAGE_ALIGN(addr);
+
+ printk(KERN_EMERG "Stack from %08lx:", (unsigned long)stack);
+ for (i = 0; i < kstack_depth_to_print; i++) {
+ if (stack + 1 > endstack)
+ break;
+ if (i % 8 == 0)
+ printk("\n" KERN_EMERG " ");
+ printk(" %08lx", *stack++);
+ }
+
+ show_trace(task, stack);
+}
+
+void dump_stack(void)
+{
+ unsigned long stack;
+ int tflags;
+ trace_buffer_save(tflags);
+ dump_bfin_trace_buffer();
+ show_stack(current, &stack);
+ trace_buffer_restore(tflags);
+}
+
+EXPORT_SYMBOL(dump_stack);
+
+void dump_bfin_regs(struct pt_regs *fp, void *retaddr)
+{
+ if (current->pid) {
+ printk("\nCURRENT PROCESS:\n\n");
+ printk("COMM=%s PID=%d\n", current->comm, current->pid);
+ } else {
+ printk
+ ("\nNo Valid pid - Either things are really messed up, or you are in the kernel\n");
+ }
+
+ if (current->mm) {
+ printk("TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
+ "BSS = 0x%p-0x%p USER-STACK = 0x%p\n\n",
+ (void*)current->mm->start_code,
+ (void*)current->mm->end_code,
+ (void*)current->mm->start_data,
+ (void*)current->mm->end_data,
+ (void*)current->mm->end_data,
+ (void*)current->mm->brk,
+ (void*)current->mm->start_stack);
+ }
+
+ printk("return address: 0x%p; contents of [PC-16...PC+8]:\n", retaddr);
+ if (retaddr != 0 && retaddr <= (void*)physical_mem_end
+#if L1_CODE_LENGTH != 0
+ /* FIXME: Copy the code out of L1 Instruction SRAM through dma
+ memcpy. */
+ && !(retaddr >= (void*)L1_CODE_START
+ && retaddr < (void*)(L1_CODE_START + L1_CODE_LENGTH))
+#endif
+ ) {
+ int i = 0;
+ unsigned short x = 0;
+ for (i = -16; i < 8; i++) {
+ if (get_user(x, (unsigned short *)retaddr + i))
+ break;
+#ifndef CONFIG_DEBUG_HWERR
+ /* If one of the last few instructions was a STI
+ * it is likily that the error occured awhile ago
+ * and we just noticed
+ */
+ if (x >= 0x0040 && x <= 0x0047 && i <= 0)
+ panic("\n\nWARNING : You should reconfigure the kernel to turn on\n"
+ " 'Hardware error interrupt debugging'\n"
+ " The rest of this error is meanless\n");
+#endif
+
+ if (i == -8)
+ printk("\n");
+ if (i == 0)
+ printk("X\n");
+ printk("%04x ", x);
+ }
+ } else
+ printk("Cannot look at the [PC] for it is in unreadable L1 SRAM - sorry\n");
+
+ printk("\n\n");
+
+ printk("RETE: %08lx RETN: %08lx RETX: %08lx RETS: %08lx\n",
+ fp->rete, fp->retn, fp->retx, fp->rets);
+ printk("IPEND: %04lx SYSCFG: %04lx\n", fp->ipend, fp->syscfg);
+ printk("SEQSTAT: %08lx SP: %08lx\n", (long)fp->seqstat, (long)fp);
+ printk("R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n",
+ fp->r0, fp->r1, fp->r2, fp->r3);
+ printk("R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n",
+ fp->r4, fp->r5, fp->r6, fp->r7);
+ printk("P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n",
+ fp->p0, fp->p1, fp->p2, fp->p3);
+ printk("P4: %08lx P5: %08lx FP: %08lx\n", fp->p4, fp->p5, fp->fp);
+ printk("A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n",
+ fp->a0w, fp->a0x, fp->a1w, fp->a1x);
+
+ printk("LB0: %08lx LT0: %08lx LC0: %08lx\n", fp->lb0, fp->lt0,
+ fp->lc0);
+ printk("LB1: %08lx LT1: %08lx LC1: %08lx\n", fp->lb1, fp->lt1,
+ fp->lc1);
+ printk("B0: %08lx L0: %08lx M0: %08lx I0: %08lx\n", fp->b0, fp->l0,
+ fp->m0, fp->i0);
+ printk("B1: %08lx L1: %08lx M1: %08lx I1: %08lx\n", fp->b1, fp->l1,
+ fp->m1, fp->i1);
+ printk("B2: %08lx L2: %08lx M2: %08lx I2: %08lx\n", fp->b2, fp->l2,
+ fp->m2, fp->i2);
+ printk("B3: %08lx L3: %08lx M3: %08lx I3: %08lx\n", fp->b3, fp->l3,
+ fp->m3, fp->i3);
+
+ printk("\nUSP: %08lx ASTAT: %08lx\n", rdusp(), fp->astat);
+ if ((long)fp->seqstat & SEQSTAT_EXCAUSE) {
+ printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", (void*)bfin_read_DCPLB_FAULT_ADDR());
+ printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", (void*)bfin_read_ICPLB_FAULT_ADDR());
+ }
+
+ printk("\n\n");
+}
+
+#ifdef CONFIG_SYS_BFIN_SPINLOCK_L1
+asmlinkage int sys_bfin_spinlock(int *spinlock)__attribute__((l1_text));
+#endif
+
+asmlinkage int sys_bfin_spinlock(int *spinlock)
+{
+ int ret = 0;
+ int tmp = 0;
+
+ local_irq_disable();
+ ret = get_user(tmp, spinlock);
+ if (ret == 0) {
+ if (tmp)
+ ret = 1;
+ tmp = 1;
+ put_user(tmp, spinlock);
+ }
+ local_irq_enable();
+ return ret;
+}
+
+void panic_cplb_error(int cplb_panic, struct pt_regs *fp)
+{
+ switch (cplb_panic) {
+ case CPLB_NO_UNLOCKED:
+ printk(KERN_EMERG "All CPLBs are locked\n");
+ break;
+ case CPLB_PROT_VIOL:
+ return;
+ case CPLB_NO_ADDR_MATCH:
+ return;
+ case CPLB_UNKNOWN_ERR:
+ printk(KERN_EMERG "Unknown CPLB Exception\n");
+ break;
+ }
+
+ printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", (void*)bfin_read_DCPLB_FAULT_ADDR());
+ printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", (void*)bfin_read_ICPLB_FAULT_ADDR());
+ dump_bfin_regs(fp, (void *)fp->retx);
+ dump_stack();
+ panic("Unrecoverable event\n");
+}
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
new file mode 100644
index 000000000000..6ae9ebbd8e58
--- /dev/null
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -0,0 +1,228 @@
+/*
+ * File: arch/blackfin/kernel/vmlinux.lds.S
+ * Based on: none - original work
+ * Author:
+ *
+ * Created: Tue Sep 21 2004
+ * Description: Master linker script for blackfin architecture
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#define VMLINUX_SYMBOL(_sym_) _##_sym_
+
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/mem_map.h>
+
+
+OUTPUT_FORMAT("elf32-bfin")
+ENTRY(__start)
+_jiffies = _jiffies_64;
+
+MEMORY
+{
+ ram : ORIGIN = CONFIG_BOOT_LOAD, LENGTH = (CONFIG_MEM_SIZE * 1024 * 1024) - (CONFIG_BOOT_LOAD)
+ l1_data_a : ORIGIN = L1_DATA_A_START, LENGTH = L1_DATA_A_LENGTH
+ l1_data_b : ORIGIN = L1_DATA_B_START, LENGTH = L1_DATA_B_LENGTH
+ l1_code : ORIGIN = L1_CODE_START, LENGTH = L1_CODE_LENGTH
+ l1_scratch : ORIGIN = L1_SCRATCH_START, LENGTH = L1_SCRATCH_LENGTH
+}
+
+SECTIONS
+{
+ . = CONFIG_BOOT_LOAD;
+
+ .text :
+ {
+ _text = .;
+ __stext = .;
+ *(.text)
+ SCHED_TEXT
+ *(.text.lock)
+ . = ALIGN(16);
+ ___start___ex_table = .;
+ *(__ex_table)
+ ___stop___ex_table = .;
+
+ *($code)
+ *(.rodata)
+ *(.rodata.*)
+ *(__vermagic) /* Kernel version magic */
+ *(.rodata1)
+ *(.fixup)
+ *(.spinlock.text)
+
+ /* Kernel symbol table: Normal symbols */
+ . = ALIGN(4);
+ ___start___ksymtab = .;
+ *(__ksymtab)
+ ___stop___ksymtab = .;
+
+ /* Kernel symbol table: GPL-only symbols */
+ ___start___ksymtab_gpl = .;
+ *(__ksymtab_gpl)
+ ___stop___ksymtab_gpl = .;
+
+ /* Kernel symbol table: Normal unused symbols */ \
+ ___start___ksymtab_unused = .;
+ *(__ksymtab_unused)
+ ___stop___ksymtab_unused = .;
+
+ /* Kernel symbol table: GPL-only unused symbols */
+ ___start___ksymtab_unused_gpl = .;
+ *(__ksymtab_unused_gpl)
+ ___stop___ksymtab_unused_gpl = .;
+
+
+ /* Kernel symbol table: GPL-future symbols */
+ ___start___ksymtab_gpl_future = .;
+ *(__ksymtab_gpl_future)
+ ___stop___ksymtab_gpl_future = .;
+
+ /* Kernel symbol table: Normal symbols */
+ ___start___kcrctab = .;
+ *(__kcrctab)
+ ___stop___kcrctab = .;
+
+ /* Kernel symbol table: GPL-only symbols */
+ ___start___kcrctab_gpl = .;
+ *(__kcrctab_gpl)
+ ___stop___kcrctab_gpl = .;
+
+ /* Kernel symbol table: GPL-future symbols */
+ ___start___kcrctab_gpl_future = .;
+ *(__kcrctab_gpl_future)
+ ___stop___kcrctab_gpl_future = .;
+
+ /* Kernel symbol table: strings */
+ *(__ksymtab_strings)
+
+ . = ALIGN(4);
+ __etext = .;
+ } > ram
+
+ .init :
+ {
+ . = ALIGN(4096);
+ ___init_begin = .;
+ __sinittext = .;
+ *(.init.text)
+ __einittext = .;
+ *(.init.data)
+ . = ALIGN(16);
+ ___setup_start = .;
+ *(.init.setup)
+ ___setup_end = .;
+ ___start___param = .;
+ *(__param)
+ ___stop___param = .;
+ ___initcall_start = .;
+ INITCALLS
+ ___initcall_end = .;
+ ___con_initcall_start = .;
+ *(.con_initcall.init)
+ ___con_initcall_end = .;
+ ___security_initcall_start = .;
+ *(.security_initcall.init)
+ ___security_initcall_end = .;
+ . = ALIGN(4);
+ ___initramfs_start = .;
+ *(.init.ramfs)
+ ___initramfs_end = .;
+ . = ALIGN(4);
+ ___init_end = .;
+ } > ram
+
+ __l1_lma_start = .;
+
+ .text_l1 :
+ {
+ . = ALIGN(4);
+ __stext_l1 = .;
+ *(.l1.text)
+
+ . = ALIGN(4);
+ __etext_l1 = .;
+ } > l1_code AT > ram
+
+ .data_l1 :
+ {
+ . = ALIGN(4);
+ __sdata_l1 = .;
+ *(.l1.data)
+ __edata_l1 = .;
+
+ . = ALIGN(4);
+ __sbss_l1 = .;
+ *(.l1.bss)
+
+ . = ALIGN(32);
+ *(.data_l1.cacheline_aligned)
+
+ . = ALIGN(4);
+ __ebss_l1 = .;
+ } > l1_data_a AT > ram
+ .data_b_l1 :
+ {
+ . = ALIGN(4);
+ __sdata_b_l1 = .;
+ *(.l1.data.B)
+ __edata_b_l1 = .;
+
+ . = ALIGN(4);
+ __sbss_b_l1 = .;
+ *(.l1.bss.B)
+
+ . = ALIGN(4);
+ __ebss_b_l1 = .;
+ } > l1_data_b AT > ram
+
+ .data :
+ {
+ __sdata = .;
+ . = ALIGN(0x2000);
+ *(.data.init_task)
+ *(.data)
+
+ . = ALIGN(32);
+ *(.data.cacheline_aligned)
+
+ . = ALIGN(0x2000);
+ __edata = .;
+ } > ram
+
+ /DISCARD/ : { /* Exit code and data*/
+ *(.exit.text)
+ *(.exit.data)
+ *(.exitcall.exit)
+ } > ram
+
+ .bss :
+ {
+ . = ALIGN(4);
+ ___bss_start = .;
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ ___bss_stop = .;
+ __end = . ;
+ } > ram
+}
diff --git a/arch/blackfin/lib/Makefile b/arch/blackfin/lib/Makefile
new file mode 100644
index 000000000000..635288fc5f54
--- /dev/null
+++ b/arch/blackfin/lib/Makefile
@@ -0,0 +1,11 @@
+#
+# arch/blackfin/lib/Makefile
+#
+
+lib-y := \
+ ashldi3.o ashrdi3.o lshrdi3.o \
+ muldi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o \
+ checksum.o memcpy.o memset.o memcmp.o memchr.o memmove.o \
+ strcmp.o strcpy.o strncmp.o strncpy.o \
+ umulsi3_highpart.o smulsi3_highpart.o \
+ ins.o outs.o
diff --git a/arch/blackfin/lib/ashldi3.c b/arch/blackfin/lib/ashldi3.c
new file mode 100644
index 000000000000..a8c279e9b192
--- /dev/null
+++ b/arch/blackfin/lib/ashldi3.c
@@ -0,0 +1,58 @@
+/*
+ * File: arch/blackfin/lib/ashldi3.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "gcclib.h"
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+DItype __ashldi3(DItype u, word_type b)__attribute__((l1_text));
+#endif
+
+DItype __ashldi3(DItype u, word_type b)
+{
+ DIunion w;
+ word_type bm;
+ DIunion uu;
+
+ if (b == 0)
+ return u;
+
+ uu.ll = u;
+
+ bm = (sizeof(SItype) * BITS_PER_UNIT) - b;
+ if (bm <= 0) {
+ w.s.low = 0;
+ w.s.high = (USItype) uu.s.low << -bm;
+ } else {
+ USItype carries = (USItype) uu.s.low >> bm;
+ w.s.low = (USItype) uu.s.low << b;
+ w.s.high = ((USItype) uu.s.high << b) | carries;
+ }
+
+ return w.ll;
+}
diff --git a/arch/blackfin/lib/ashrdi3.c b/arch/blackfin/lib/ashrdi3.c
new file mode 100644
index 000000000000..a0d3419329ca
--- /dev/null
+++ b/arch/blackfin/lib/ashrdi3.c
@@ -0,0 +1,59 @@
+/*
+ * File: arch/blackfin/lib/ashrdi3.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "gcclib.h"
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+DItype __ashrdi3(DItype u, word_type b)__attribute__((l1_text));
+#endif
+
+DItype __ashrdi3(DItype u, word_type b)
+{
+ DIunion w;
+ word_type bm;
+ DIunion uu;
+
+ if (b == 0)
+ return u;
+
+ uu.ll = u;
+
+ bm = (sizeof(SItype) * BITS_PER_UNIT) - b;
+ if (bm <= 0) {
+ /* w.s.high = 1..1 or 0..0 */
+ w.s.high = uu.s.high >> (sizeof(SItype) * BITS_PER_UNIT - 1);
+ w.s.low = uu.s.high >> -bm;
+ } else {
+ USItype carries = (USItype) uu.s.high << bm;
+ w.s.high = uu.s.high >> b;
+ w.s.low = ((USItype) uu.s.low >> b) | carries;
+ }
+
+ return w.ll;
+}
diff --git a/arch/blackfin/lib/checksum.c b/arch/blackfin/lib/checksum.c
new file mode 100644
index 000000000000..42768e0c80ca
--- /dev/null
+++ b/arch/blackfin/lib/checksum.c
@@ -0,0 +1,140 @@
+/*
+ * File: arch/blackfin/lib/checksum.c
+ * Based on: none - original work
+ * Author:
+ *
+ * Created:
+ * Description: An implementation of the TCP/IP protocol suite for the LINUX
+ * operating system. INET is implemented using the BSD Socket
+ * interface as the means of communication with the user level.
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <net/checksum.h>
+#include <asm/checksum.h>
+
+#ifdef CONFIG_IP_CHECKSUM_L1
+static unsigned short do_csum(const unsigned char *buff, int len)__attribute__((l1_text));
+#endif
+
+static unsigned short do_csum(const unsigned char *buff, int len)
+{
+ register unsigned long sum = 0;
+ int swappem = 0;
+
+ if (1 & (unsigned long)buff) {
+ sum = *buff << 8;
+ buff++;
+ len--;
+ ++swappem;
+ }
+
+ while (len > 1) {
+ sum += *(unsigned short *)buff;
+ buff += 2;
+ len -= 2;
+ }
+
+ if (len > 0)
+ sum += *buff;
+
+ /* Fold 32-bit sum to 16 bits */
+ while (sum >> 16)
+ sum = (sum & 0xffff) + (sum >> 16);
+
+ if (swappem)
+ sum = ((sum & 0xff00) >> 8) + ((sum & 0x00ff) << 8);
+
+ return sum;
+
+}
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.
+ */
+unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl)
+{
+ return ~do_csum(iph, ihl * 4);
+}
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+unsigned int csum_partial(const unsigned char *buff, int len, unsigned int sum)
+{
+ /*
+ * Just in case we get nasty checksum data...
+ * Like 0xffff6ec3 in the case of our IPv6 multicast header.
+ * We fold to begin with, as well as at the end.
+ */
+ sum = (sum & 0xffff) + (sum >> 16);
+
+ sum += do_csum(buff, len);
+
+ sum = (sum & 0xffff) + (sum >> 16);
+
+ return sum;
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+unsigned short ip_compute_csum(const unsigned char *buff, int len)
+{
+ return ~do_csum(buff, len);
+}
+
+/*
+ * copy from fs while checksumming, otherwise like csum_partial
+ */
+
+unsigned int
+csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst,
+ int len, int sum, int *csum_err)
+{
+ if (csum_err)
+ *csum_err = 0;
+ memcpy(dst, src, len);
+ return csum_partial(dst, len, sum);
+}
+
+/*
+ * copy from ds while checksumming, otherwise like csum_partial
+ */
+
+unsigned int csum_partial_copy(const unsigned char *src, unsigned char *dst,
+ int len, int sum)
+{
+ memcpy(dst, src, len);
+ return csum_partial(dst, len, sum);
+}
diff --git a/arch/blackfin/lib/divsi3.S b/arch/blackfin/lib/divsi3.S
new file mode 100644
index 000000000000..3e29861852b2
--- /dev/null
+++ b/arch/blackfin/lib/divsi3.S
@@ -0,0 +1,216 @@
+/*
+ * File: arch/blackfin/lib/divsi3.S
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: 16 / 32 bit signed division.
+ * Special cases :
+ * 1) If(numerator == 0)
+ * return 0
+ * 2) If(denominator ==0)
+ * return positive max = 0x7fffffff
+ * 3) If(numerator == denominator)
+ * return 1
+ * 4) If(denominator ==1)
+ * return numerator
+ * 5) If(denominator == -1)
+ * return -numerator
+ *
+ * Operand : R0 - Numerator (i)
+ * R1 - Denominator (i)
+ * R0 - Quotient (o)
+ * Registers Used : R2-R7,P0-P2
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+.global ___divsi3;
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 2;
+___divsi3 :
+
+
+ R3 = R0 ^ R1;
+ R0 = ABS R0;
+
+ CC = V;
+
+ r3 = rot r3 by -1;
+ r1 = abs r1; /* now both positive, r3.30 means "negate result",
+ ** r3.31 means overflow, add one to result
+ */
+ cc = r0 < r1;
+ if cc jump .Lret_zero;
+ r2 = r1 >> 15;
+ cc = r2;
+ if cc jump .Lidents;
+ r2 = r1 << 16;
+ cc = r2 <= r0;
+ if cc jump .Lidents;
+
+ DIVS(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+ DIVQ(R0, R1);
+
+ R0 = R0.L (Z);
+ r1 = r3 >> 31; /* add overflow issue back in */
+ r0 = r0 + r1;
+ r1 = -r0;
+ cc = bittst(r3, 30);
+ if cc r0 = r1;
+ RTS;
+
+/* Can't use the primitives. Test common identities.
+** If the identity is true, return the value in R2.
+*/
+
+.Lidents:
+ CC = R1 == 0; /* check for divide by zero */
+ IF CC JUMP .Lident_return;
+
+ CC = R0 == 0; /* check for division of zero */
+ IF CC JUMP .Lzero_return;
+
+ CC = R0 == R1; /* check for identical operands */
+ IF CC JUMP .Lident_return;
+
+ CC = R1 == 1; /* check for divide by 1 */
+ IF CC JUMP .Lident_return;
+
+ R2.L = ONES R1;
+ R2 = R2.L (Z);
+ CC = R2 == 1;
+ IF CC JUMP .Lpower_of_two;
+
+ /* Identities haven't helped either.
+ ** Perform the full division process.
+ */
+
+ P1 = 31; /* Set loop counter */
+
+ [--SP] = (R7:5); /* Push registers R5-R7 */
+ R2 = -R1;
+ [--SP] = R2;
+ R2 = R0 << 1; /* R2 lsw of dividend */
+ R6 = R0 ^ R1; /* Get sign */
+ R5 = R6 >> 31; /* Shift sign to LSB */
+
+ R0 = 0 ; /* Clear msw partial remainder */
+ R2 = R2 | R5; /* Shift quotient bit */
+ R6 = R0 ^ R1; /* Get new quotient bit */
+
+ LSETUP(.Llst,.Llend) LC0 = P1; /* Setup loop */
+.Llst: R7 = R2 >> 31; /* record copy of carry from R2 */
+ R2 = R2 << 1; /* Shift 64 bit dividend up by 1 bit */
+ R0 = R0 << 1 || R5 = [SP];
+ R0 = R0 | R7; /* and add carry */
+ CC = R6 < 0; /* Check quotient(AQ) */
+ /* we might be subtracting divisor (AQ==0) */
+ IF CC R5 = R1; /* or we might be adding divisor (AQ==1)*/
+ R0 = R0 + R5; /* do add or subtract, as indicated by AQ */
+ R6 = R0 ^ R1; /* Generate next quotient bit */
+ R5 = R6 >> 31;
+ /* Assume AQ==1, shift in zero */
+ BITTGL(R5,0); /* tweak AQ to be what we want to shift in */
+.Llend: R2 = R2 + R5; /* and then set shifted-in value to
+ ** tweaked AQ.
+ */
+ r1 = r3 >> 31;
+ r2 = r2 + r1;
+ cc = bittst(r3,30);
+ r0 = -r2;
+ if !cc r0 = r2;
+ SP += 4;
+ (R7:5)= [SP++]; /* Pop registers R6-R7 */
+ RTS;
+
+.Lident_return:
+ CC = R1 == 0; /* check for divide by zero => 0x7fffffff */
+ R2 = -1 (X);
+ R2 >>= 1;
+ IF CC JUMP .Ltrue_ident_return;
+
+ CC = R0 == R1; /* check for identical operands => 1 */
+ R2 = 1 (Z);
+ IF CC JUMP .Ltrue_ident_return;
+
+ R2 = R0; /* assume divide by 1 => numerator */
+ /*FALLTHRU*/
+
+.Ltrue_ident_return:
+ R0 = R2; /* Return an identity value */
+ R2 = -R2;
+ CC = bittst(R3,30);
+ IF CC R0 = R2;
+.Lzero_return:
+ RTS; /* ...including zero */
+
+.Lpower_of_two:
+ /* Y has a single bit set, which means it's a power of two.
+ ** That means we can perform the division just by shifting
+ ** X to the right the appropriate number of bits
+ */
+
+ /* signbits returns the number of sign bits, minus one.
+ ** 1=>30, 2=>29, ..., 0x40000000=>0. Which means we need
+ ** to shift right n-signbits spaces. It also means 0x80000000
+ ** is a special case, because that *also* gives a signbits of 0
+ */
+
+ R2 = R0 >> 31;
+ CC = R1 < 0;
+ IF CC JUMP .Ltrue_ident_return;
+
+ R1.l = SIGNBITS R1;
+ R1 = R1.L (Z);
+ R1 += -30;
+ R0 = LSHIFT R0 by R1.L;
+ r1 = r3 >> 31;
+ r0 = r0 + r1;
+ R2 = -R0; // negate result if necessary
+ CC = bittst(R3,30);
+ IF CC R0 = R2;
+ RTS;
+
+.Lret_zero:
+ R0 = 0;
+ RTS;
diff --git a/arch/blackfin/lib/gcclib.h b/arch/blackfin/lib/gcclib.h
new file mode 100644
index 000000000000..9ccd39a135ee
--- /dev/null
+++ b/arch/blackfin/lib/gcclib.h
@@ -0,0 +1,47 @@
+/*
+ * File: arch/blackfin/lib/gcclib.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#define BITS_PER_UNIT 8
+#define SI_TYPE_SIZE (sizeof (SItype) * BITS_PER_UNIT)
+
+typedef unsigned int UQItype __attribute__ ((mode(QI)));
+typedef int SItype __attribute__ ((mode(SI)));
+typedef unsigned int USItype __attribute__ ((mode(SI)));
+typedef int DItype __attribute__ ((mode(DI)));
+typedef int word_type __attribute__ ((mode(__word__)));
+typedef unsigned int UDItype __attribute__ ((mode(DI)));
+
+struct DIstruct {
+ SItype low, high;
+};
+
+typedef union {
+ struct DIstruct s;
+ DItype ll;
+} DIunion;
diff --git a/arch/blackfin/lib/ins.S b/arch/blackfin/lib/ins.S
new file mode 100644
index 000000000000..730d2b427538
--- /dev/null
+++ b/arch/blackfin/lib/ins.S
@@ -0,0 +1,69 @@
+/*
+ * File: arch/blackfin/lib/ins.S
+ * Based on:
+ * Author: Bas Vermeulen <bas@buyways.nl>
+ *
+ * Created: Tue Mar 22 15:27:24 CEST 2005
+ * Description: Implementation of ins{bwl} for BlackFin processors using zero overhead loops.
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ * Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl>
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+
+.align 2
+
+ENTRY(_insl)
+ P0 = R0; /* P0 = port */
+ cli R3;
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+ SSYNC;
+ LSETUP( .Llong_loop_s, .Llong_loop_e) LC0 = P2;
+.Llong_loop_s: R0 = [P0];
+.Llong_loop_e: [P1++] = R0;
+ sti R3;
+ RTS;
+
+ENTRY(_insw)
+ P0 = R0; /* P0 = port */
+ cli R3;
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+ SSYNC;
+ LSETUP( .Lword_loop_s, .Lword_loop_e) LC0 = P2;
+.Lword_loop_s: R0 = W[P0];
+.Lword_loop_e: W[P1++] = R0;
+ sti R3;
+ RTS;
+
+ENTRY(_insb)
+ P0 = R0; /* P0 = port */
+ cli R3;
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+ SSYNC;
+ LSETUP( .Lbyte_loop_s, .Lbyte_loop_e) LC0 = P2;
+.Lbyte_loop_s: R0 = B[P0];
+.Lbyte_loop_e: B[P1++] = R0;
+ sti R3;
+ RTS;
diff --git a/arch/blackfin/lib/lshrdi3.c b/arch/blackfin/lib/lshrdi3.c
new file mode 100644
index 000000000000..84b9c5592220
--- /dev/null
+++ b/arch/blackfin/lib/lshrdi3.c
@@ -0,0 +1,72 @@
+/*
+ * File: arch/blackfin/lib/lshrdi3.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#define BITS_PER_UNIT 8
+
+typedef int SItype __attribute__ ((mode(SI)));
+typedef unsigned int USItype __attribute__ ((mode(SI)));
+typedef int DItype __attribute__ ((mode(DI)));
+typedef int word_type __attribute__ ((mode(__word__)));
+
+struct DIstruct {
+ SItype high, low;
+};
+
+typedef union {
+ struct DIstruct s;
+ DItype ll;
+} DIunion;
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+DItype __lshrdi3(DItype u, word_type b)__attribute__((l1_text));
+#endif
+
+DItype __lshrdi3(DItype u, word_type b)
+{
+ DIunion w;
+ word_type bm;
+ DIunion uu;
+
+ if (b == 0)
+ return u;
+
+ uu.ll = u;
+
+ bm = (sizeof(SItype) * BITS_PER_UNIT) - b;
+ if (bm <= 0) {
+ w.s.high = 0;
+ w.s.low = (USItype) uu.s.high >> -bm;
+ } else {
+ USItype carries = (USItype) uu.s.high << bm;
+ w.s.high = (USItype) uu.s.high >> b;
+ w.s.low = ((USItype) uu.s.low >> b) | carries;
+ }
+
+ return w.ll;
+}
diff --git a/arch/blackfin/lib/memchr.S b/arch/blackfin/lib/memchr.S
new file mode 100644
index 000000000000..498122250d07
--- /dev/null
+++ b/arch/blackfin/lib/memchr.S
@@ -0,0 +1,70 @@
+/*
+ * File: arch/blackfin/lib/memchr.S
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+
+/* void *memchr(const void *s, int c, size_t n);
+ * R0 = address (s)
+ * R1 = sought byte (c)
+ * R2 = count (n)
+ *
+ * Returns pointer to located character.
+ */
+
+.text
+
+.align 2
+
+ENTRY(_memchr)
+ P0 = R0; /* P0 = address */
+ P2 = R2; /* P2 = count */
+ R1 = R1.B(Z);
+ CC = R2 == 0;
+ IF CC JUMP .Lfailed;
+
+.Lbytes:
+ LSETUP (.Lbyte_loop_s, .Lbyte_loop_e) LC0=P2;
+
+.Lbyte_loop_s:
+ R3 = B[P0++](Z);
+ CC = R3 == R1;
+ IF CC JUMP .Lfound;
+.Lbyte_loop_e:
+ NOP;
+
+.Lfailed:
+ R0=0;
+ RTS;
+
+.Lfound:
+ R0 = P0;
+ R0 += -1;
+ RTS;
+
+.size _memchr,.-_memchr
diff --git a/arch/blackfin/lib/memcmp.S b/arch/blackfin/lib/memcmp.S
new file mode 100644
index 000000000000..5b9502368fc6
--- /dev/null
+++ b/arch/blackfin/lib/memcmp.S
@@ -0,0 +1,110 @@
+/*
+ * File: arch/blackfin/lib/memcmp.S
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+
+/* int memcmp(const void *s1, const void *s2, size_t n);
+ * R0 = First Address (s1)
+ * R1 = Second Address (s2)
+ * R2 = count (n)
+ *
+ * Favours word aligned data.
+ */
+
+.text
+
+.align 2
+
+ENTRY(_memcmp)
+ I1 = P3;
+ P0 = R0; /* P0 = s1 address */
+ P3 = R1; /* P3 = s2 Address */
+ P2 = R2 ; /* P2 = count */
+ CC = R2 <= 7(IU);
+ IF CC JUMP .Ltoo_small;
+ I0 = R1; /* s2 */
+ R1 = R1 | R0; /* OR addresses together */
+ R1 <<= 30; /* check bottom two bits */
+ CC = AZ; /* AZ set if zero. */
+ IF !CC JUMP .Lbytes ; /* Jump if addrs not aligned. */
+
+ P1 = P2 >> 2; /* count = n/4 */
+ R3 = 3;
+ R2 = R2 & R3; /* remainder */
+ P2 = R2; /* set remainder */
+
+ LSETUP (.Lquad_loop_s, .Lquad_loop_e) LC0=P1;
+.Lquad_loop_s:
+ MNOP || R0 = [P0++] || R1 = [I0++];
+ CC = R0 == R1;
+ IF !CC JUMP .Lquad_different;
+.Lquad_loop_e:
+ NOP;
+
+ P3 = I0; /* s2 */
+.Ltoo_small:
+ CC = P2 == 0; /* Check zero count*/
+ IF CC JUMP .Lfinished; /* very unlikely*/
+
+.Lbytes:
+ LSETUP (.Lbyte_loop_s, .Lbyte_loop_e) LC0=P2;
+.Lbyte_loop_s:
+ R1 = B[P3++](Z); /* *s2 */
+ R0 = B[P0++](Z); /* *s1 */
+ CC = R0 == R1;
+ IF !CC JUMP .Ldifferent;
+.Lbyte_loop_e:
+ NOP;
+
+.Ldifferent:
+ R0 = R0 - R1;
+ P3 = I1;
+ RTS;
+
+.Lquad_different:
+ /* We've read two quads which don't match.
+ * Can't just compare them, because we're
+ * a little-endian machine, so the MSBs of
+ * the regs occur at later addresses in the
+ * string.
+ * Arrange to re-read those two quads again,
+ * byte-by-byte.
+ */
+ P0 += -4; /* back up to the start of the */
+ P3 = I0; /* quads, and increase the*/
+ P2 += 4; /* remainder count*/
+ P3 += -4;
+ JUMP .Lbytes;
+
+.Lfinished:
+ R0 = 0;
+ P3 = I1;
+ RTS;
+
+.size _memcmp,.-_memcmp
diff --git a/arch/blackfin/lib/memcpy.S b/arch/blackfin/lib/memcpy.S
new file mode 100644
index 000000000000..c1e00eff541c
--- /dev/null
+++ b/arch/blackfin/lib/memcpy.S
@@ -0,0 +1,142 @@
+/*
+ * File: arch/blackfin/lib/memcpy.S
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: internal version of memcpy(), issued by the compiler
+ * to copy blocks of data around.
+ * This is really memmove() - it has to be able to deal with
+ * possible overlaps, because that ambiguity is when the compiler
+ * gives up and calls a function. We have our own, internal version
+ * so that we get something we trust, even if the user has redefined
+ * the normal symbol.
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+
+/* void *memcpy(void *dest, const void *src, size_t n);
+ * R0 = To Address (dest) (leave unchanged to form result)
+ * R1 = From Address (src)
+ * R2 = count
+ *
+ * Note: Favours word alignment
+ */
+
+#ifdef CONFIG_MEMCPY_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 2
+
+ENTRY(_memcpy)
+ CC = R2 <= 0; /* length not positive? */
+ IF CC JUMP .L_P1L2147483647; /* Nothing to do */
+
+ P0 = R0 ; /* dst*/
+ P1 = R1 ; /* src*/
+ P2 = R2 ; /* length */
+
+ /* check for overlapping data */
+ CC = R1 < R0; /* src < dst */
+ IF !CC JUMP .Lno_overlap;
+ R3 = R1 + R2;
+ CC = R0 < R3; /* and dst < src+len */
+ IF CC JUMP .Lhas_overlap;
+
+.Lno_overlap:
+ /* Check for aligned data.*/
+
+ R3 = R1 | R0;
+ R0 = 0x3;
+ R3 = R3 & R0;
+ CC = R3; /* low bits set on either address? */
+ IF CC JUMP .Lnot_aligned;
+
+ /* Both addresses are word-aligned, so we can copy
+ at least part of the data using word copies.*/
+ P2 = P2 >> 2;
+ CC = P2 <= 2;
+ IF !CC JUMP .Lmore_than_seven;
+ /* less than eight bytes... */
+ P2 = R2;
+ LSETUP(.Lthree_start, .Lthree_end) LC0=P2;
+ R0 = R1; /* setup src address for return */
+.Lthree_start:
+ R3 = B[P1++] (X);
+.Lthree_end:
+ B[P0++] = R3;
+
+ RTS;
+
+.Lmore_than_seven:
+ /* There's at least eight bytes to copy. */
+ P2 += -1; /* because we unroll one iteration */
+ LSETUP(.Lword_loop, .Lword_loop) LC0=P2;
+ R0 = R1;
+ I1 = P1;
+ R3 = [I1++];
+.Lword_loop:
+ MNOP || [P0++] = R3 || R3 = [I1++];
+
+ [P0++] = R3;
+ /* Any remaining bytes to copy? */
+ R3 = 0x3;
+ R3 = R2 & R3;
+ CC = R3 == 0;
+ P1 = I1; /* in case there's something left, */
+ IF !CC JUMP .Lbytes_left;
+ RTS;
+.Lbytes_left: P2 = R3;
+.Lnot_aligned:
+ /* From here, we're copying byte-by-byte. */
+ LSETUP (.Lbyte_start, .Lbyte_end) LC0=P2;
+ R0 = R1; /* Save src address for return */
+.Lbyte_start:
+ R1 = B[P1++] (X);
+.Lbyte_end:
+ B[P0++] = R1;
+
+.L_P1L2147483647:
+ RTS;
+
+.Lhas_overlap:
+ /* Need to reverse the copying, because the
+ * dst would clobber the src.
+ * Don't bother to work out alignment for
+ * the reverse case.
+ */
+ R0 = R1; /* save src for later. */
+ P0 = P0 + P2;
+ P0 += -1;
+ P1 = P1 + P2;
+ P1 += -1;
+ LSETUP(.Lover_start, .Lover_end) LC0=P2;
+.Lover_start:
+ R1 = B[P1--] (X);
+.Lover_end:
+ B[P0--] = R1;
+
+ RTS;
diff --git a/arch/blackfin/lib/memmove.S b/arch/blackfin/lib/memmove.S
new file mode 100644
index 000000000000..2e5fb7f8df13
--- /dev/null
+++ b/arch/blackfin/lib/memmove.S
@@ -0,0 +1,103 @@
+/*
+ * File: arch/blackfin/lib/memmove.S
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+
+.align 2
+
+/*
+ * C Library function MEMMOVE
+ * R0 = To Address (leave unchanged to form result)
+ * R1 = From Address
+ * R2 = count
+ * Data may overlap
+ */
+
+ENTRY(_memmove)
+ I1 = P3;
+ P0 = R0; /* P0 = To address */
+ P3 = R1; /* P3 = From Address */
+ P2 = R2; /* P2 = count */
+ CC = P2 == 0; /* Check zero count*/
+ IF CC JUMP .Lfinished; /* very unlikely */
+
+ CC = R1 < R0 (IU); /* From < To */
+ IF !CC JUMP .Lno_overlap;
+ R3 = R1 + R2;
+ CC = R0 <= R3 (IU); /* (From+len) >= To */
+ IF CC JUMP .Loverlap;
+.Lno_overlap:
+ R3 = 11;
+ CC = R2 <= R3;
+ IF CC JUMP .Lbytes;
+ R3 = R1 | R0; /* OR addresses together */
+ R3 <<= 30; /* check bottom two bits */
+ CC = AZ; /* AZ set if zero.*/
+ IF !CC JUMP .Lbytes; /* Jump if addrs not aligned.*/
+
+ I0 = P3;
+ P1 = P2 >> 2; /* count = n/4 */
+ P1 += -1;
+ R3 = 3;
+ R2 = R2 & R3; /* remainder */
+ P2 = R2; /* set remainder */
+ R1 = [I0++];
+
+ LSETUP (.Lquad_loop, .Lquad_loop) LC0=P1;
+.Lquad_loop: MNOP || [P0++] = R1 || R1 = [I0++];
+ [P0++] = R1;
+
+ CC = P2 == 0; /* any remaining bytes? */
+ P3 = I0; /* Ammend P3 to updated ptr. */
+ IF !CC JUMP .Lbytes;
+ P3 = I1;
+ RTS;
+
+.Lbytes: LSETUP (.Lbyte2_s, .Lbyte2_e) LC0=P2;
+.Lbyte2_s: R1 = B[P3++](Z);
+.Lbyte2_e: B[P0++] = R1;
+
+.Lfinished: P3 = I1;
+ RTS;
+
+.Loverlap:
+ P2 += -1;
+ P0 = P0 + P2;
+ P3 = P3 + P2;
+ R1 = B[P3--] (Z);
+ CC = P2 == 0;
+ IF CC JUMP .Lno_loop;
+ LSETUP (.Lol_s, .Lol_e) LC0 = P2;
+.Lol_s: B[P0--] = R1;
+.Lol_e: R1 = B[P3--] (Z);
+.Lno_loop: B[P0] = R1;
+ P3 = I1;
+ RTS;
+
+.size _memmove,.-_memmove
diff --git a/arch/blackfin/lib/memset.S b/arch/blackfin/lib/memset.S
new file mode 100644
index 000000000000..ba6d047568dd
--- /dev/null
+++ b/arch/blackfin/lib/memset.S
@@ -0,0 +1,109 @@
+/*
+ * File: arch/blackfin/lib/memset.S
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+
+.align 2
+
+#ifdef CONFIG_MEMSET_L1
+.section .l1.text
+#else
+.text
+#endif
+
+/*
+ * C Library function MEMSET
+ * R0 = address (leave unchanged to form result)
+ * R1 = filler byte
+ * R2 = count
+ * Favours word aligned data.
+ */
+
+ENTRY(_memset)
+ P0 = R0 ; /* P0 = address */
+ P2 = R2 ; /* P2 = count */
+ R3 = R0 + R2; /* end */
+ CC = R2 <= 7(IU);
+ IF CC JUMP .Ltoo_small;
+ R1 = R1.B (Z); /* R1 = fill char */
+ R2 = 3;
+ R2 = R0 & R2; /* addr bottom two bits */
+ CC = R2 == 0; /* AZ set if zero. */
+ IF !CC JUMP .Lforce_align ; /* Jump if addr not aligned. */
+
+.Laligned:
+ P1 = P2 >> 2; /* count = n/4 */
+ R2 = R1 << 8; /* create quad filler */
+ R2.L = R2.L + R1.L(NS);
+ R2.H = R2.L + R1.H(NS);
+ P2 = R3;
+
+ LSETUP (.Lquad_loop , .Lquad_loop) LC0=P1;
+.Lquad_loop:
+ [P0++] = R2;
+
+ CC = P0 == P2;
+ IF !CC JUMP .Lbytes_left;
+ RTS;
+
+.Lbytes_left:
+ R2 = R3; /* end point */
+ R3 = P0; /* current position */
+ R2 = R2 - R3; /* bytes left */
+ P2 = R2;
+
+.Ltoo_small:
+ CC = P2 == 0; /* Check zero count */
+ IF CC JUMP .Lfinished; /* Unusual */
+
+.Lbytes:
+ LSETUP (.Lbyte_loop , .Lbyte_loop) LC0=P2;
+.Lbyte_loop:
+ B[P0++] = R1;
+
+.Lfinished:
+ RTS;
+
+.Lforce_align:
+ CC = BITTST (R0, 0); /* odd byte */
+ R0 = 4;
+ R0 = R0 - R2;
+ P1 = R0;
+ R0 = P0; /* Recover return address */
+ IF !CC JUMP .Lskip1;
+ B[P0++] = R1;
+.Lskip1:
+ CC = R2 <= 2; /* 2 bytes */
+ P2 -= P1; /* reduce count */
+ IF !CC JUMP .Laligned;
+ B[P0++] = R1;
+ B[P0++] = R1;
+ JUMP .Laligned;
+
+.size _memset,.-_memset
diff --git a/arch/blackfin/lib/modsi3.S b/arch/blackfin/lib/modsi3.S
new file mode 100644
index 000000000000..528b8b1ccb34
--- /dev/null
+++ b/arch/blackfin/lib/modsi3.S
@@ -0,0 +1,79 @@
+/*
+ * File: arch/blackfin/lib/modsi3.S
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: This program computes 32 bit signed remainder. It calls div32 function
+ * for quotient estimation.
+ *
+ * Registers used :
+ * Numerator/ Denominator in R0, R1
+ * R0 - returns remainder.
+ * R2-R7
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+.global ___modsi3;
+.type ___modsi3, STT_FUNC;
+.extern ___divsi3;
+.type ___divsi3, STT_FUNC;
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+.section .l1.text
+#else
+.text
+#endif
+
+___modsi3:
+
+ CC=R0==0;
+ IF CC JUMP .LRETURN_R0; /* Return 0, if numerator == 0 */
+ CC=R1==0;
+ IF CC JUMP .LRETURN_ZERO; /* Return 0, if denominator == 0 */
+ CC=R0==R1;
+ IF CC JUMP .LRETURN_ZERO; /* Return 0, if numerator == denominator */
+ CC = R1 == 1;
+ IF CC JUMP .LRETURN_ZERO; /* Return 0, if denominator == 1 */
+ CC = R1 == -1;
+ IF CC JUMP .LRETURN_ZERO; /* Return 0, if denominator == -1 */
+
+ /* Valid input. Use __divsi3() to compute the quotient, and then
+ * derive the remainder from that. */
+
+ [--SP] = (R7:6); /* Push R7 and R6 */
+ [--SP] = RETS; /* and return address */
+ R7 = R0; /* Copy of R0 */
+ R6 = R1; /* Save for later */
+ SP += -12; /* Should always provide this space */
+ CALL ___divsi3; /* Compute signed quotient using ___divsi3()*/
+ SP += 12;
+ R0 *= R6; /* Quotient * divisor */
+ R0 = R7 - R0; /* Dividend - (quotient * divisor) */
+ RETS = [SP++]; /* Get back return address */
+ (R7:6) = [SP++]; /* Pop registers R7 and R4 */
+ RTS; /* Store remainder */
+
+.LRETURN_ZERO:
+ R0 = 0;
+.LRETURN_R0:
+ RTS;
diff --git a/arch/blackfin/lib/muldi3.c b/arch/blackfin/lib/muldi3.c
new file mode 100644
index 000000000000..303d0c6a6dba
--- /dev/null
+++ b/arch/blackfin/lib/muldi3.c
@@ -0,0 +1,99 @@
+/*
+ * File: arch/blackfin/lib/muldi3.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef SI_TYPE_SIZE
+#define SI_TYPE_SIZE 32
+#endif
+#define __ll_b (1L << (SI_TYPE_SIZE / 2))
+#define __ll_lowpart(t) ((usitype) (t) % __ll_b)
+#define __ll_highpart(t) ((usitype) (t) / __ll_b)
+#define BITS_PER_UNIT 8
+
+#if !defined(umul_ppmm)
+#define umul_ppmm(w1, w0, u, v) \
+ do { \
+ usitype __x0, __x1, __x2, __x3; \
+ usitype __ul, __vl, __uh, __vh; \
+ \
+ __ul = __ll_lowpart (u); \
+ __uh = __ll_highpart (u); \
+ __vl = __ll_lowpart (v); \
+ __vh = __ll_highpart (v); \
+ \
+ __x0 = (usitype) __ul * __vl; \
+ __x1 = (usitype) __ul * __vh; \
+ __x2 = (usitype) __uh * __vl; \
+ __x3 = (usitype) __uh * __vh; \
+ \
+ __x1 += __ll_highpart (__x0);/* this can't give carry */ \
+ __x1 += __x2; /* but this indeed can */ \
+ if (__x1 < __x2) /* did we get it? */ \
+ __x3 += __ll_b; /* yes, add it in the proper pos. */ \
+ \
+ (w1) = __x3 + __ll_highpart (__x1); \
+ (w0) = __ll_lowpart (__x1) * __ll_b + __ll_lowpart (__x0); \
+ } while (0)
+#endif
+
+#if !defined(__umulsidi3)
+#define __umulsidi3(u, v) \
+ ({diunion __w; \
+ umul_ppmm (__w.s.high, __w.s.low, u, v); \
+ __w.ll; })
+#endif
+
+typedef unsigned int usitype __attribute__ ((mode(SI)));
+typedef int sitype __attribute__ ((mode(SI)));
+typedef int ditype __attribute__ ((mode(DI)));
+typedef int word_type __attribute__ ((mode(__word__)));
+
+struct distruct {
+ sitype low, high;
+};
+typedef union {
+ struct distruct s;
+ ditype ll;
+} diunion;
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+ditype __muldi3(ditype u, ditype v)__attribute__((l1_text));
+#endif
+
+ditype __muldi3(ditype u, ditype v)
+{
+ diunion w;
+ diunion uu, vv;
+
+ uu.ll = u, vv.ll = v;
+ w.ll = __umulsidi3(uu.s.low, vv.s.low);
+ w.s.high += ((usitype) uu.s.low * (usitype) vv.s.high
+ + (usitype) uu.s.high * (usitype) vv.s.low);
+
+ return w.ll;
+}
diff --git a/arch/blackfin/lib/outs.S b/arch/blackfin/lib/outs.S
new file mode 100644
index 000000000000..f8c876fe8930
--- /dev/null
+++ b/arch/blackfin/lib/outs.S
@@ -0,0 +1,62 @@
+/*
+ * File: arch/blackfin/lib/outs.S
+ * Based on:
+ * Author: Bas Vermeulen <bas@buyways.nl>
+ *
+ * Created: Tue Mar 22 15:27:24 CEST 2005
+ * Description: Implementation of outs{bwl} for BlackFin processors using zero overhead loops.
+ *
+ * Modified: Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl>
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+
+.align 2
+
+ENTRY(_outsl)
+ P0 = R0; /* P0 = port */
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+
+ LSETUP( .Llong_loop_s, .Llong_loop_e) LC0 = P2;
+.Llong_loop_s: R0 = [P1++];
+.Llong_loop_e: [P0] = R0;
+ RTS;
+
+ENTRY(_outsw)
+ P0 = R0; /* P0 = port */
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+
+ LSETUP( .Lword_loop_s, .Lword_loop_e) LC0 = P2;
+.Lword_loop_s: R0 = W[P1++];
+.Lword_loop_e: W[P0] = R0;
+ RTS;
+
+ENTRY(_outsb)
+ P0 = R0; /* P0 = port */
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+
+ LSETUP( .Lbyte_loop_s, .Lbyte_loop_e) LC0 = P2;
+.Lbyte_loop_s: R0 = B[P1++];
+.Lbyte_loop_e: B[P0] = R0;
+ RTS;
diff --git a/arch/blackfin/lib/smulsi3_highpart.S b/arch/blackfin/lib/smulsi3_highpart.S
new file mode 100644
index 000000000000..10b8f8da576f
--- /dev/null
+++ b/arch/blackfin/lib/smulsi3_highpart.S
@@ -0,0 +1,30 @@
+.align 2
+.global ___smulsi3_highpart;
+.type ___smulsi3_highpart, STT_FUNC;
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+.section .l1.text
+#else
+.text
+#endif
+
+___smulsi3_highpart:
+ R2 = R1.L * R0.L (FU);
+ R3 = R1.H * R0.L (IS,M);
+ R0 = R0.H * R1.H, R1 = R0.H * R1.L (IS,M);
+
+ R1.L = R2.H + R1.L;
+ cc = ac0;
+ R2 = cc;
+
+ R1.L = R1.L + R3.L;
+ cc = ac0;
+ R1 >>>= 16;
+ R3 >>>= 16;
+ R1 = R1 + R3;
+ R1 = R1 + R2;
+ R2 = cc;
+ R1 = R1 + R2;
+
+ R0 = R0 + R1;
+ RTS;
diff --git a/arch/blackfin/lib/strcmp.c b/arch/blackfin/lib/strcmp.c
new file mode 100644
index 000000000000..2ad47c4254ba
--- /dev/null
+++ b/arch/blackfin/lib/strcmp.c
@@ -0,0 +1,11 @@
+#include <linux/types.h>
+
+#define strcmp __inline_strcmp
+#include <asm/string.h>
+#undef strcmp
+
+int strcmp(const char *dest, const char *src)
+{
+ return __inline_strcmp(dest, src);
+}
+
diff --git a/arch/blackfin/lib/strcpy.c b/arch/blackfin/lib/strcpy.c
new file mode 100644
index 000000000000..4dc835a8a19b
--- /dev/null
+++ b/arch/blackfin/lib/strcpy.c
@@ -0,0 +1,11 @@
+#include <linux/types.h>
+
+#define strcpy __inline_strcpy
+#include <asm/string.h>
+#undef strcpy
+
+char *strcpy(char *dest, const char *src)
+{
+ return __inline_strcpy(dest, src);
+}
+
diff --git a/arch/blackfin/lib/strncmp.c b/arch/blackfin/lib/strncmp.c
new file mode 100644
index 000000000000..947bcfe3f3bb
--- /dev/null
+++ b/arch/blackfin/lib/strncmp.c
@@ -0,0 +1,11 @@
+#include <linux/types.h>
+
+#define strncmp __inline_strncmp
+#include <asm/string.h>
+#undef strncmp
+
+int strncmp(const char *cs, const char *ct, size_t count)
+{
+ return __inline_strncmp(cs, ct, count);
+}
+
diff --git a/arch/blackfin/lib/strncpy.c b/arch/blackfin/lib/strncpy.c
new file mode 100644
index 000000000000..77a9b2e95097
--- /dev/null
+++ b/arch/blackfin/lib/strncpy.c
@@ -0,0 +1,11 @@
+#include <linux/types.h>
+
+#define strncpy __inline_strncpy
+#include <asm/string.h>
+#undef strncpy
+
+char *strncpy(char *dest, const char *src, size_t n)
+{
+ return __inline_strncpy(dest, src, n);
+}
+
diff --git a/arch/blackfin/lib/udivsi3.S b/arch/blackfin/lib/udivsi3.S
new file mode 100644
index 000000000000..d39a12916259
--- /dev/null
+++ b/arch/blackfin/lib/udivsi3.S
@@ -0,0 +1,298 @@
+/*
+ * File: arch/blackfin/lib/udivsi3.S
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+
+#define CARRY AC0
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+.section .l1.text
+#else
+.text
+#endif
+
+
+ENTRY(___udivsi3)
+
+ CC = R0 < R1 (IU); /* If X < Y, always return 0 */
+ IF CC JUMP .Lreturn_ident;
+
+ R2 = R1 << 16;
+ CC = R2 <= R0 (IU);
+ IF CC JUMP .Lidents;
+
+ R2 = R0 >> 31; /* if X is a 31-bit number */
+ R3 = R1 >> 15; /* and Y is a 15-bit number */
+ R2 = R2 | R3; /* then it's okay to use the DIVQ builtins (fallthrough to fast)*/
+ CC = R2;
+ IF CC JUMP .Ly_16bit;
+
+/* METHOD 1: FAST DIVQ
+ We know we have a 31-bit dividend, and 15-bit divisor so we can use the
+ simple divq approach (first setting AQ to 0 - implying unsigned division,
+ then 16 DIVQ's).
+*/
+
+ AQ = CC; /* Clear AQ (CC==0) */
+
+/* ISR States: When dividing two integers (32.0/16.0) using divide primitives,
+ we need to shift the dividend one bit to the left.
+ We have already checked that we have a 31-bit number so we are safe to do
+ that.
+*/
+ R0 <<= 1;
+ DIVQ(R0, R1); // 1
+ DIVQ(R0, R1); // 2
+ DIVQ(R0, R1); // 3
+ DIVQ(R0, R1); // 4
+ DIVQ(R0, R1); // 5
+ DIVQ(R0, R1); // 6
+ DIVQ(R0, R1); // 7
+ DIVQ(R0, R1); // 8
+ DIVQ(R0, R1); // 9
+ DIVQ(R0, R1); // 10
+ DIVQ(R0, R1); // 11
+ DIVQ(R0, R1); // 12
+ DIVQ(R0, R1); // 13
+ DIVQ(R0, R1); // 14
+ DIVQ(R0, R1); // 15
+ DIVQ(R0, R1); // 16
+ R0 = R0.L (Z);
+ RTS;
+
+.Ly_16bit:
+ /* We know that the upper 17 bits of Y might have bits set,
+ ** or that the sign bit of X might have a bit. If Y is a
+ ** 16-bit number, but not bigger, then we can use the builtins
+ ** with a post-divide correction.
+ ** R3 currently holds Y>>15, which means R3's LSB is the
+ ** bit we're interested in.
+ */
+
+ /* According to the ISR, to use the Divide primitives for
+ ** unsigned integer divide, the useable range is 31 bits
+ */
+ CC = ! BITTST(R0, 31);
+
+ /* IF condition is true we can scale our inputs and use the divide primitives,
+ ** with some post-adjustment
+ */
+ R3 += -1; /* if so, Y is 0x00008nnn */
+ CC &= AZ;
+
+ /* If condition is true we can scale our inputs and use the divide primitives,
+ ** with some post-adjustment
+ */
+ R3 = R1 >> 1; /* Pre-scaled divisor for primitive case */
+ R2 = R0 >> 16;
+
+ R2 = R3 - R2; /* shifted divisor < upper 16 bits of dividend */
+ CC &= CARRY;
+ IF CC JUMP .Lshift_and_correct;
+
+ /* Fall through to the identities */
+
+/* METHOD 2: identities and manual calculation
+ We are not able to use the divide primites, but may still catch some special
+ cases.
+*/
+.Lidents:
+ /* Test for common identities. Value to be returned is placed in R2. */
+ CC = R0 == 0; /* 0/Y => 0 */
+ IF CC JUMP .Lreturn_r0;
+ CC = R0 == R1; /* X==Y => 1 */
+ IF CC JUMP .Lreturn_ident;
+ CC = R1 == 1; /* X/1 => X */
+ IF CC JUMP .Lreturn_ident;
+
+ R2.L = ONES R1;
+ R2 = R2.L (Z);
+ CC = R2 == 1;
+ IF CC JUMP .Lpower_of_two;
+
+ [--SP] = (R7:5); /* Push registers R5-R7 */
+
+ /* Idents don't match. Go for the full operation. */
+
+
+ R6 = 2; /* assume we'll shift two */
+ R3 = 1;
+
+ P2 = R1;
+ /* If either R0 or R1 have sign set, */
+ /* divide them by two, and note it's */
+ /* been done. */
+ CC = R1 < 0;
+ R2 = R1 >> 1;
+ IF CC R1 = R2; /* Possibly-shifted R1 */
+ IF !CC R6 = R3; /* R1 doesn't, so at most 1 shifted */
+
+ P0 = 0;
+ R3 = -R1;
+ [--SP] = R3;
+ R2 = R0 >> 1;
+ R2 = R0 >> 1;
+ CC = R0 < 0;
+ IF CC P0 = R6; /* Number of values divided */
+ IF !CC R2 = R0; /* Shifted R0 */
+
+ /* P0 is 0, 1 (NR/=2) or 2 (NR/=2, DR/=2) */
+
+ /* r2 holds Copy dividend */
+ R3 = 0; /* Clear partial remainder */
+ R7 = 0; /* Initialise quotient bit */
+
+ P1 = 32; /* Set loop counter */
+ LSETUP(.Lulst, .Lulend) LC0 = P1; /* Set loop counter */
+.Lulst: R6 = R2 >> 31; /* R6 = sign bit of R2, for carry */
+ R2 = R2 << 1; /* Shift 64 bit dividend up by 1 bit */
+ R3 = R3 << 1 || R5 = [SP];
+ R3 = R3 | R6; /* Include any carry */
+ CC = R7 < 0; /* Check quotient(AQ) */
+ /* If AQ==0, we'll sub divisor */
+ IF CC R5 = R1; /* and if AQ==1, we'll add it. */
+ R3 = R3 + R5; /* Add/sub divsor to partial remainder */
+ R7 = R3 ^ R1; /* Generate next quotient bit */
+
+ R5 = R7 >> 31; /* Get AQ */
+ BITTGL(R5, 0); /* Invert it, to get what we'll shift */
+.Lulend: R2 = R2 + R5; /* and "shift" it in. */
+
+ CC = P0 == 0; /* Check how many inputs we shifted */
+ IF CC JUMP .Lno_mult; /* if none... */
+ R6 = R2 << 1;
+ CC = P0 == 1;
+ IF CC R2 = R6; /* if 1, Q = Q*2 */
+ IF !CC R1 = P2; /* if 2, restore stored divisor */
+
+ R3 = R2; /* Copy of R2 */
+ R3 *= R1; /* Q * divisor */
+ R5 = R0 - R3; /* Z = (dividend - Q * divisor) */
+ CC = R1 <= R5 (IU); /* Check if divisor <= Z? */
+ R6 = CC; /* if yes, R6 = 1 */
+ R2 = R2 + R6; /* if yes, add one to quotient(Q) */
+.Lno_mult:
+ SP += 4;
+ (R7:5) = [SP++]; /* Pop registers R5-R7 */
+ R0 = R2; /* Store quotient */
+ RTS;
+
+.Lreturn_ident:
+ CC = R0 < R1 (IU); /* If X < Y, always return 0 */
+ R2 = 0;
+ IF CC JUMP .Ltrue_return_ident;
+ R2 = -1 (X); /* X/0 => 0xFFFFFFFF */
+ CC = R1 == 0;
+ IF CC JUMP .Ltrue_return_ident;
+ R2 = -R2; /* R2 now 1 */
+ CC = R0 == R1; /* X==Y => 1 */
+ IF CC JUMP .Ltrue_return_ident;
+ R2 = R0; /* X/1 => X */
+ /*FALLTHRU*/
+
+.Ltrue_return_ident:
+ R0 = R2;
+.Lreturn_r0:
+ RTS;
+
+.Lpower_of_two:
+ /* Y has a single bit set, which means it's a power of two.
+ ** That means we can perform the division just by shifting
+ ** X to the right the appropriate number of bits
+ */
+
+ /* signbits returns the number of sign bits, minus one.
+ ** 1=>30, 2=>29, ..., 0x40000000=>0. Which means we need
+ ** to shift right n-signbits spaces. It also means 0x80000000
+ ** is a special case, because that *also* gives a signbits of 0
+ */
+
+ R2 = R0 >> 31;
+ CC = R1 < 0;
+ IF CC JUMP .Ltrue_return_ident;
+
+ R1.l = SIGNBITS R1;
+ R1 = R1.L (Z);
+ R1 += -30;
+ R0 = LSHIFT R0 by R1.L;
+ RTS;
+
+/* METHOD 3: PRESCALE AND USE THE DIVIDE PRIMITIVES WITH SOME POST-CORRECTION
+ Two scaling operations are required to use the divide primitives with a
+ divisor > 0x7FFFF.
+ Firstly (as in method 1) we need to shift the dividend 1 to the left for
+ integer division.
+ Secondly we need to shift both the divisor and dividend 1 to the right so
+ both are in range for the primitives.
+ The left/right shift of the dividend does nothing so we can skip it.
+*/
+.Lshift_and_correct:
+ R2 = R0;
+ // R3 is already R1 >> 1
+ CC=!CC;
+ AQ = CC; /* Clear AQ, got here with CC = 0 */
+ DIVQ(R2, R3); // 1
+ DIVQ(R2, R3); // 2
+ DIVQ(R2, R3); // 3
+ DIVQ(R2, R3); // 4
+ DIVQ(R2, R3); // 5
+ DIVQ(R2, R3); // 6
+ DIVQ(R2, R3); // 7
+ DIVQ(R2, R3); // 8
+ DIVQ(R2, R3); // 9
+ DIVQ(R2, R3); // 10
+ DIVQ(R2, R3); // 11
+ DIVQ(R2, R3); // 12
+ DIVQ(R2, R3); // 13
+ DIVQ(R2, R3); // 14
+ DIVQ(R2, R3); // 15
+ DIVQ(R2, R3); // 16
+
+ /* According to the Instruction Set Reference:
+ To divide by a divisor > 0x7FFF,
+ 1. prescale and perform divide to obtain quotient (Q) (done above),
+ 2. multiply quotient by unscaled divisor (result M)
+ 3. subtract the product from the divident to get an error (E = X - M)
+ 4. if E < divisor (Y) subtract 1, if E > divisor (Y) add 1, else return quotient (Q)
+ */
+ R3 = R2.L (Z); /* Q = X' / Y' */
+ R2 = R3; /* Preserve Q */
+ R2 *= R1; /* M = Q * Y */
+ R2 = R0 - R2; /* E = X - M */
+ R0 = R3; /* Copy Q into result reg */
+
+/* Correction: If result of the multiply is negative, we overflowed
+ and need to correct the result by subtracting 1 from the result.*/
+ R3 = 0xFFFF (Z);
+ R2 = R2 >> 16; /* E >> 16 */
+ CC = R2 == R3;
+ R3 = 1 ;
+ R1 = R0 - R3;
+ IF CC R0 = R1;
+ RTS;
diff --git a/arch/blackfin/lib/umodsi3.S b/arch/blackfin/lib/umodsi3.S
new file mode 100644
index 000000000000..b55ce96ab89f
--- /dev/null
+++ b/arch/blackfin/lib/umodsi3.S
@@ -0,0 +1,66 @@
+/*
+ * File: arch/blackfin/lib/umodsi3.S
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: libgcc1 routines for Blackfin 5xx
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.extern ___udivsi3;
+.globl ___umodsi3
+___umodsi3:
+
+ CC=R0==0;
+ IF CC JUMP .LRETURN_R0; /* Return 0, if NR == 0 */
+ CC= R1==0;
+ IF CC JUMP .LRETURN_ZERO_VAL; /* Return 0, if DR == 0 */
+ CC=R0==R1;
+ IF CC JUMP .LRETURN_ZERO_VAL; /* Return 0, if NR == DR */
+ CC = R1 == 1;
+ IF CC JUMP .LRETURN_ZERO_VAL; /* Return 0, if DR == 1 */
+ CC = R0<R1 (IU);
+ IF CC JUMP .LRETURN_R0; /* Return dividend (R0),IF NR<DR */
+
+ [--SP] = (R7:6); /* Push registers and */
+ [--SP] = RETS; /* Return address */
+ R7 = R0; /* Copy of R0 */
+ R6 = R1;
+ SP += -12; /* Should always provide this space */
+ CALL ___udivsi3; /* Compute unsigned quotient using ___udiv32()*/
+ SP += 12;
+ R0 *= R6; /* Quotient * divisor */
+ R0 = R7 - R0; /* Dividend - (quotient * divisor) */
+ RETS = [SP++]; /* Pop return address */
+ ( R7:6) = [SP++]; /* And registers */
+ RTS; /* Return remainder */
+.LRETURN_ZERO_VAL:
+ R0 = 0;
+.LRETURN_R0:
+ RTS;
diff --git a/arch/blackfin/lib/umulsi3_highpart.S b/arch/blackfin/lib/umulsi3_highpart.S
new file mode 100644
index 000000000000..aac8218fb258
--- /dev/null
+++ b/arch/blackfin/lib/umulsi3_highpart.S
@@ -0,0 +1,23 @@
+.align 2
+.global ___umulsi3_highpart;
+.type ___umulsi3_highpart, STT_FUNC;
+
+#ifdef CONFIG_ARITHMETIC_OPS_L1
+.section .l1.text
+#else
+.text
+#endif
+
+___umulsi3_highpart:
+ R2 = R1.H * R0.H, R3 = R1.L * R0.H (FU);
+ R0 = R1.L * R0.L, R1 = R1.H * R0.L (FU);
+ R0 >>= 16;
+ /* Unsigned multiplication has the nice property that we can
+ ignore carry on this first addition. */
+ R0 = R0 + R3;
+ R0 = R0 + R1;
+ cc = ac0;
+ R1 = cc;
+ R1 = PACK(R1.l,R0.h);
+ R0 = R1 + R2;
+ RTS;
diff --git a/arch/blackfin/mach-bf533/Kconfig b/arch/blackfin/mach-bf533/Kconfig
new file mode 100644
index 000000000000..14297b3ed5c3
--- /dev/null
+++ b/arch/blackfin/mach-bf533/Kconfig
@@ -0,0 +1,92 @@
+if (BF533 || BF532 || BF531)
+
+menu "BF533/2/1 Specific Configuration"
+
+comment "Interrupt Priority Assignment"
+menu "Priority"
+
+config UART_ERROR
+ int "UART ERROR"
+ default 7
+config SPORT0_ERROR
+ int "SPORT0 ERROR"
+ default 7
+config SPI_ERROR
+ int "SPI ERROR"
+ default 7
+config SPORT1_ERROR
+ int "SPORT1 ERROR"
+ default 7
+config PPI_ERROR
+ int "PPI ERROR"
+ default 7
+config DMA_ERROR
+ int "DMA ERROR"
+ default 7
+config PLLWAKE_ERROR
+ int "PLL WAKEUP ERROR"
+ default 7
+
+config RTC_ERROR
+ int "RTC ERROR"
+ default 8
+config DMA0_PPI
+ int "DMA0 PPI"
+ default 8
+
+config DMA1_SPORT0RX
+ int "DMA1 (SPORT0 RX)"
+ default 9
+config DMA2_SPORT0TX
+ int "DMA2 (SPORT0 TX)"
+ default 9
+config DMA3_SPORT1RX
+ int "DMA3 (SPORT1 RX)"
+ default 9
+config DMA4_SPORT1TX
+ int "DMA4 (SPORT1 TX)"
+ default 9
+config DMA5_SPI
+ int "DMA5 (SPI)"
+ default 10
+config DMA6_UARTRX
+ int "DMA6 (UART0 RX)"
+ default 10
+config DMA7_UARTTX
+ int "DMA7 (UART0 TX)"
+ default 10
+config TIMER0
+ int "TIMER0"
+ default 11
+config TIMER1
+ int "TIMER1"
+ default 11
+config TIMER2
+ int "TIMER2"
+ default 11
+config PFA
+ int "PF Interrupt A"
+ default 12
+config PFB
+ int "PF Interrupt B"
+ default 12
+config MEMDMA0
+ int "MEMORY DMA0"
+ default 13
+config MEMDMA1
+ int "MEMORY DMA1"
+ default 13
+config WDTIMER
+ int "WATCH DOG TIMER"
+ default 13
+
+ help
+ Enter the priority numbers between 7-13 ONLY. Others are Reserved.
+ This applies to all the above. It is not recommended to assign the
+ highest priority number 7 to UART or any other device.
+
+endmenu
+
+endmenu
+
+endif
diff --git a/arch/blackfin/mach-bf533/Makefile b/arch/blackfin/mach-bf533/Makefile
new file mode 100644
index 000000000000..76d2c2b8579a
--- /dev/null
+++ b/arch/blackfin/mach-bf533/Makefile
@@ -0,0 +1,9 @@
+#
+# arch/blackfin/mach-bf533/Makefile
+#
+
+extra-y := head.o
+
+obj-y := ints-priority.o
+
+obj-$(CONFIG_CPU_FREQ_BF533) += cpu.o
diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile
new file mode 100644
index 000000000000..12a631ab389d
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/Makefile
@@ -0,0 +1,8 @@
+#
+# arch/blackfin/mach-bf533/boards/Makefile
+#
+
+obj-$(CONFIG_GENERIC_BOARD) += generic_board.o
+obj-$(CONFIG_BFIN533_STAMP) += stamp.o
+obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o
+obj-$(CONFIG_BFIN533_BLUETECHNIX_CM) += cm_bf533.o
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
new file mode 100644
index 000000000000..23a7f607df3f
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -0,0 +1,267 @@
+/*
+ * File: arch/blackfin/mach-bf533/boards/cm_bf533.c
+ * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
+ * Author: Aidan Williams <aidan@nicta.com.au> Copright 2005
+ *
+ * Created: 2005
+ * Description: Board description file
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/usb_isp1362.h>
+#include <asm/irq.h>
+#include <asm/bfin5xx_spi.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "Bluetechnix CM BF533";
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader",
+ .size = 0x00020000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ },{
+ .name = "kernel",
+ .size = 0xe0000,
+ .offset = 0x20000
+ },{
+ .name = "file system",
+ .size = 0x700000,
+ .offset = 0x00100000,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+ .enable_dma = 1, /* use dma transfer with this chip*/
+ .bits_per_word = 16,
+};
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },{
+ .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 2, /* Framework chip select. */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .controller_data = &spi_adc_chip_info,
+ },
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+ {
+ .modalias = "ad1836-spi",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+ .controller_data = &ad1836_spi_chip_info,
+ },
+#endif
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master spi_bfin_master_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device spi_bfin_master_device = {
+ .name = "bfin-spi-master",
+ .id = 1, /* Bus number */
+ .dev = {
+ .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .start = 0x20200300,
+ .end = 0x20200300 + 16,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF0,
+ .end = IRQ_PF0,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 1,
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+ {
+ .start = 0x20308000,
+ .end = 0x20308000,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0x20308004,
+ .end = 0x20308004,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF4,
+ .end = IRQ_PF4,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+ .sel15Kres = 1,
+ .clknotstop = 0,
+ .oc_enable = 0,
+ .int_act_high = 0,
+ .int_edge_triggered = 0,
+ .remote_wakeup_connected = 0,
+ .no_power_switching = 1,
+ .power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+ .name = "isp1362-hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &isp1362_priv,
+ },
+ .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+ .resource = isp1362_hcd_resources,
+};
+#endif
+
+static struct platform_device *cm_bf533_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+ &bfin_sport0_uart_device,
+ &bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+ &isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &spi_bfin_master_device,
+#endif
+};
+
+static int __init cm_bf533_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ platform_add_devices(cm_bf533_devices, ARRAY_SIZE(cm_bf533_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+ return 0;
+}
+
+arch_initcall(cm_bf533_init);
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
new file mode 100644
index 000000000000..747298ea907b
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -0,0 +1,224 @@
+/*
+ * File: arch/blackfin/mach-bf533/ezkit.c
+ * Based on: Orginal Work
+ * Author: Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created: 2005
+ * Description:
+ *
+ * Modified: Robin Getz <rgetz@blackfin.uclinux.org> - Named the boards
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/usb_isp1362.h>
+#include <asm/irq.h>
+#include <asm/bfin5xx_spi.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "ADDS-BF533-EZKIT";
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+/*
+ * USB-LAN EzExtender board
+ * Driver needs to know address, irq and flag pin.
+ */
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .name = "smc91x-regs",
+ .start = 0x20310300,
+ .end = 0x20310300 + 16,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF9,
+ .end = IRQ_PF9,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader",
+ .size = 0x00020000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ },{
+ .name = "kernel",
+ .size = 0xe0000,
+ .offset = 0x20000
+ },{
+ .name = "file system",
+ .size = 0x700000,
+ .offset = 0x00100000,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+ .enable_dma = 1, /* use dma transfer with this chip*/
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+ {
+ .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .controller_data = &spi_adc_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+ {
+ .modalias = "ad1836-spi",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+ .controller_data = &ad1836_spi_chip_info,
+ },
+#endif
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master spi_bfin_master_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device spi_bfin_master_device = {
+ .name = "bfin-spi-master",
+ .id = 1, /* Bus number */
+ .dev = {
+ .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+static struct platform_device *ezkit_devices[] __initdata = {
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &spi_bfin_master_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+};
+
+static int __init ezkit_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+ return 0;
+}
+
+arch_initcall(ezkit_init);
diff --git a/arch/blackfin/mach-bf533/boards/generic_board.c b/arch/blackfin/mach-bf533/boards/generic_board.c
new file mode 100644
index 000000000000..c0f43ccfbfb5
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/generic_board.c
@@ -0,0 +1,95 @@
+/*
+ * File: arch/blackfin/mach-bf533/generic_board.c
+ * Based on: arch/blackfin/mach-bf533/ezkit.c
+ * Author: Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created: 2005
+ * Description:
+ *
+ * Modified:
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/irq.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "UNKNOWN BOARD";
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+/*
+ * Driver needs to know address, irq and flag pin.
+ */
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .start = 0x20300300,
+ .end = 0x20300300 + 16,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PROG_INTB,
+ .end = IRQ_PROG_INTB,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },{
+ /*
+ * denotes the flag pin and is used directly if
+ * CONFIG_IRQCHIP_DEMUX_GPIO is defined.
+ */
+ .start = IRQ_PF7,
+ .end = IRQ_PF7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+static struct platform_device *generic_board_devices[] __initdata = {
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+};
+
+static int __init generic_board_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices));
+}
+
+arch_initcall(generic_board_init);
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
new file mode 100644
index 000000000000..d7b3a5d74e8c
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -0,0 +1,321 @@
+/*
+ * File: arch/blackfin/mach-bf533/stamp.c
+ * Based on: arch/blackfin/mach-bf533/ezkit.c
+ * Author: Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created: 2005
+ * Description: Board Info File for the BF533-STAMP
+ *
+ * Modified:
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb_isp1362.h>
+#endif
+#include <asm/irq.h>
+#include <asm/bfin5xx_spi.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "ADDS-BF533-STAMP";
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+/*
+ * Driver needs to know address, irq and flag pin.
+ */
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .name = "smc91x-regs",
+ .start = 0x20300300,
+ .end = 0x20300300 + 16,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF7,
+ .end = IRQ_PF7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+ {
+ .start = 0x20300000,
+ .end = 0x20300000 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF10,
+ .end = IRQ_PF10,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device net2272_bfin_device = {
+ .name = "net2272",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(net2272_bfin_resources),
+ .resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader",
+ .size = 0x00020000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ },{
+ .name = "kernel",
+ .size = 0xe0000,
+ .offset = 0x20000
+ },{
+ .name = "file system",
+ .size = 0x700000,
+ .offset = 0x00100000,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+ .enable_dma = 1, /* use dma transfer with this chip*/
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_PBX)
+static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
+ .ctl_reg = 0x4, /* send zero */
+ .enable_dma = 0,
+ .bits_per_word = 8,
+ .cs_change_per_word = 1,
+};
+#endif
+
+#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
+static struct bfin5xx_spi_chip ad5304_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+ {
+ .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .controller_data = &spi_adc_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+ {
+ .modalias = "ad1836-spi",
+ .max_speed_hz = 31250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+ .controller_data = &ad1836_spi_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_PBX)
+ {
+ .modalias = "fxs-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 3,
+ .controller_data= &spi_si3xxx_chip_info,
+ .mode = SPI_MODE_3,
+ },
+ {
+ .modalias = "fxo-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 2,
+ .controller_data= &spi_si3xxx_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
+ {
+ .modalias = "ad5304_spi",
+ .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 2,
+ .platform_data = NULL,
+ .controller_data = &ad5304_chip_info,
+ .mode = SPI_MODE_2,
+ },
+#endif
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master spi_bfin_master_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device spi_bfin_master_device = {
+ .name = "bfin-spi-master",
+ .id = 1, /* Bus number */
+ .dev = {
+ .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+static struct platform_device bfin_fb_device = {
+ .name = "bf537-fb",
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 1,
+};
+#endif
+
+static struct platform_device *stamp_devices[] __initdata = {
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+ &net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &spi_bfin_master_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+ &bfin_sport0_uart_device,
+ &bfin_sport1_uart_device,
+#endif
+};
+
+static int __init stamp_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+ return 0;
+}
+
+arch_initcall(stamp_init);
diff --git a/arch/blackfin/mach-bf533/cpu.c b/arch/blackfin/mach-bf533/cpu.c
new file mode 100644
index 000000000000..99547c4c290e
--- /dev/null
+++ b/arch/blackfin/mach-bf533/cpu.c
@@ -0,0 +1,161 @@
+/*
+ * File: arch/blackfin/mach-bf533/cpu.c
+ * Based on:
+ * Author: michael.kang@analog.com
+ *
+ * Created:
+ * Description: clock scaling for the bf533
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <asm/dpmc.h>
+#include <linux/fs.h>
+#include <asm/bfin-global.h>
+
+/* CONFIG_CLKIN_HZ=11059200 */
+#define VCO5 (CONFIG_CLKIN_HZ*45) /*497664000 */
+#define VCO4 (CONFIG_CLKIN_HZ*36) /*398131200 */
+#define VCO3 (CONFIG_CLKIN_HZ*27) /*298598400 */
+#define VCO2 (CONFIG_CLKIN_HZ*18) /*199065600 */
+#define VCO1 (CONFIG_CLKIN_HZ*9) /*99532800 */
+#define VCO(x) VCO##x
+
+#define FREQ(x) {VCO(x),VCO(x)/4},{VCO(x),VCO(x)/2},{VCO(x),VCO(x)}
+/* frequency */
+static struct cpufreq_frequency_table bf533_freq_table[] = {
+ FREQ(1),
+ FREQ(3),
+ {VCO4, VCO4 / 2}, {VCO4, VCO4},
+ FREQ(5),
+ {0, CPUFREQ_TABLE_END},
+};
+
+/*
+ * dpmc_fops->ioctl()
+ * static int dpmc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+ */
+static int bf533_getfreq(unsigned int cpu)
+{
+ unsigned long cclk_mhz, vco_mhz;
+
+ /* The driver only support single cpu */
+ if (cpu == 0)
+ dpmc_fops.ioctl(NULL, NULL, IOCTL_GET_CORECLOCK, &cclk_mhz);
+ else
+ cclk_mhz = -1;
+ return cclk_mhz;
+}
+
+static int bf533_target(struct cpufreq_policy *policy,
+ unsigned int target_freq, unsigned int relation)
+{
+ unsigned long cclk_mhz;
+ unsigned long vco_mhz;
+ unsigned long flags;
+ unsigned int index, vco_index;
+ int i;
+
+ struct cpufreq_freqs freqs;
+ if (cpufreq_frequency_table_target
+ (policy, bf533_freq_table, target_freq, relation, &index))
+ return -EINVAL;
+ cclk_mhz = bf533_freq_table[index].frequency;
+ vco_mhz = bf533_freq_table[index].index;
+
+ dpmc_fops.ioctl(NULL, NULL, IOCTL_CHANGE_FREQUENCY, &vco_mhz);
+ freqs.old = bf533_getfreq(0);
+ freqs.new = cclk_mhz;
+ freqs.cpu = 0;
+
+ pr_debug("cclk begin change to cclk %d,vco=%d,index=%d,target=%d,oldfreq=%d\n",
+ cclk_mhz, vco_mhz, index, target_freq, freqs.old);
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ local_irq_save(flags);
+ dpmc_fops.ioctl(NULL, NULL, IOCTL_SET_CCLK, &cclk_mhz);
+ local_irq_restore(flags);
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ vco_mhz = get_vco();
+ cclk_mhz = get_cclk();
+ return 0;
+}
+
+/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on
+ * this platform, anyway.
+ */
+static int bf533_verify_speed(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, &bf533_freq_table);
+}
+
+static int __init __bf533_cpu_init(struct cpufreq_policy *policy)
+{
+ int result;
+
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+ policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ /*Now ,only support one cpu */
+ policy->cur = bf533_getfreq(0);
+ cpufreq_frequency_table_get_attr(bf533_freq_table, policy->cpu);
+ return cpufreq_frequency_table_cpuinfo(policy, bf533_freq_table);
+}
+
+static struct freq_attr *bf533_freq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static struct cpufreq_driver bf533_driver = {
+ .verify = bf533_verify_speed,
+ .target = bf533_target,
+ .get = bf533_getfreq,
+ .init = __bf533_cpu_init,
+ .name = "bf533",
+ .owner = THIS_MODULE,
+ .attr = bf533_freq_attr,
+};
+
+static int __init bf533_cpu_init(void)
+{
+ return cpufreq_register_driver(&bf533_driver);
+}
+
+static void __exit bf533_cpu_exit(void)
+{
+ cpufreq_unregister_driver(&bf533_driver);
+}
+
+MODULE_AUTHOR("Mickael Kang");
+MODULE_DESCRIPTION("cpufreq driver for BF533 CPU");
+MODULE_LICENSE("GPL");
+
+module_init(bf533_cpu_init);
+module_exit(bf533_cpu_exit);
diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S
new file mode 100644
index 000000000000..4808edb0680f
--- /dev/null
+++ b/arch/blackfin/mach-bf533/head.S
@@ -0,0 +1,774 @@
+/*
+ * File: arch/blackfin/mach-bf533/head.S
+ * Based on:
+ * Author: Jeff Dionne <jeff@uclinux.org> COPYRIGHT 1998 D. Jeff Dionne
+ *
+ * Created: 1998
+ * Description: bf533 startup file
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+#if CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/mach/mem_init.h>
+#endif
+#if CONFIG_DEBUG_KERNEL_START
+#include <asm/mach-common/def_LPBlackfin.h>
+#endif
+
+.global __rambase
+.global __ramstart
+.global __ramend
+.extern ___bss_stop
+.extern ___bss_start
+.extern _bf53x_relocate_l1_mem
+
+#define INITIAL_STACK 0xFFB01000
+
+.text
+
+ENTRY(__start)
+ENTRY(__stext)
+ /* R0: argument of command line string, passed from uboot, save it */
+ R7 = R0;
+ /* Set the SYSCFG register */
+ R0 = 0x36;
+ /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/
+ SYSCFG = R0;
+ R0 = 0;
+
+ /*Clear Out All the data and pointer Registers*/
+ R1 = R0;
+ R2 = R0;
+ R3 = R0;
+ R4 = R0;
+ R5 = R0;
+ R6 = R0;
+
+ P0 = R0;
+ P1 = R0;
+ P2 = R0;
+ P3 = R0;
+ P4 = R0;
+ P5 = R0;
+
+ LC0 = r0;
+ LC1 = r0;
+ L0 = r0;
+ L1 = r0;
+ L2 = r0;
+ L3 = r0;
+
+ /* Clear Out All the DAG Registers*/
+ B0 = r0;
+ B1 = r0;
+ B2 = r0;
+ B3 = r0;
+
+ I0 = r0;
+ I1 = r0;
+ I2 = r0;
+ I3 = r0;
+
+ M0 = r0;
+ M1 = r0;
+ M2 = r0;
+ M3 = r0;
+
+#if CONFIG_DEBUG_KERNEL_START
+
+/*
+ * Set up a temporary Event Vector Table, so if something bad happens before
+ * the kernel is fully started, it doesn't vector off into the bootloaders
+ * table
+ */
+ P0.l = lo(EVT2);
+ P0.h = hi(EVT2);
+ P1.l = lo(EVT15);
+ P1.h = hi(EVT15);
+ P2.l = debug_kernel_start_trap;
+ P2.h = debug_kernel_start_trap;
+
+ RTS = P2;
+ RTI = P2;
+ RTX = P2;
+ RTN = P2;
+ RTE = P2;
+
+.Lfill_temp_vector_table:
+ [P0++] = P2; /* Core Event Vector Table */
+ CC = P0 == P1;
+ if !CC JUMP .Lfill_temp_vector_table
+ P0 = r0;
+ P1 = r0;
+ P2 = r0;
+
+#endif
+
+ p0.h = hi(FIO_MASKA_C);
+ p0.l = lo(FIO_MASKA_C);
+ r0 = 0xFFFF(Z);
+ w[p0] = r0.L; /* Disable all interrupts */
+ ssync;
+
+ p0.h = hi(FIO_MASKB_C);
+ p0.l = lo(FIO_MASKB_C);
+ r0 = 0xFFFF(Z);
+ w[p0] = r0.L; /* Disable all interrupts */
+ ssync;
+
+ /* Turn off the icache */
+ p0.l = (IMEM_CONTROL & 0xFFFF);
+ p0.h = (IMEM_CONTROL >> 16);
+ R1 = [p0];
+ R0 = ~ENICPLB;
+ R0 = R0 & R1;
+
+ /* Anomaly 05000125 */
+#ifdef ANOMALY_05000125
+ CLI R2;
+ SSYNC;
+#endif
+ [p0] = R0;
+ SSYNC;
+#ifdef ANOMALY_05000125
+ STI R2;
+#endif
+
+ /* Turn off the dcache */
+ p0.l = (DMEM_CONTROL & 0xFFFF);
+ p0.h = (DMEM_CONTROL >> 16);
+ R1 = [p0];
+ R0 = ~ENDCPLB;
+ R0 = R0 & R1;
+
+ /* Anomaly 05000125 */
+#ifdef ANOMALY_05000125
+ CLI R2;
+ SSYNC;
+#endif
+ [p0] = R0;
+ SSYNC;
+#ifdef ANOMALY_05000125
+ STI R2;
+#endif
+
+ /* Initialise UART */
+ p0.h = hi(UART_LCR);
+ p0.l = lo(UART_LCR);
+ r0 = 0x0(Z);
+ w[p0] = r0.L; /* To enable DLL writes */
+ ssync;
+
+ p0.h = hi(UART_DLL);
+ p0.l = lo(UART_DLL);
+ r0 = 0x0(Z);
+ w[p0] = r0.L;
+ ssync;
+
+ p0.h = hi(UART_DLH);
+ p0.l = lo(UART_DLH);
+ r0 = 0x00(Z);
+ w[p0] = r0.L;
+ ssync;
+
+ p0.h = hi(UART_GCTL);
+ p0.l = lo(UART_GCTL);
+ r0 = 0x0(Z);
+ w[p0] = r0.L; /* To enable UART clock */
+ ssync;
+
+ /* Initialize stack pointer */
+ sp.l = lo(INITIAL_STACK);
+ sp.h = hi(INITIAL_STACK);
+ fp = sp;
+ usp = sp;
+
+ /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
+ call _bf53x_relocate_l1_mem;
+#if CONFIG_BFIN_KERNEL_CLOCK
+ call _start_dma_code;
+#endif
+
+ /* Code for initializing Async memory banks */
+
+ p2.h = hi(EBIU_AMBCTL1);
+ p2.l = lo(EBIU_AMBCTL1);
+ r0.h = hi(AMBCTL1VAL);
+ r0.l = lo(AMBCTL1VAL);
+ [p2] = r0;
+ ssync;
+
+ p2.h = hi(EBIU_AMBCTL0);
+ p2.l = lo(EBIU_AMBCTL0);
+ r0.h = hi(AMBCTL0VAL);
+ r0.l = lo(AMBCTL0VAL);
+ [p2] = r0;
+ ssync;
+
+ p2.h = hi(EBIU_AMGCTL);
+ p2.l = lo(EBIU_AMGCTL);
+ r0 = AMGCTLVAL;
+ w[p2] = r0;
+ ssync;
+
+ /* This section keeps the processor in supervisor mode
+ * during kernel boot. Switches to user mode at end of boot.
+ * See page 3-9 of Hardware Reference manual for documentation.
+ */
+
+ /* EVT15 = _real_start */
+
+ p0.l = lo(EVT15);
+ p0.h = hi(EVT15);
+ p1.l = _real_start;
+ p1.h = _real_start;
+ [p0] = p1;
+ csync;
+
+ p0.l = lo(IMASK);
+ p0.h = hi(IMASK);
+ p1.l = IMASK_IVG15;
+ p1.h = 0x0;
+ [p0] = p1;
+ csync;
+
+ raise 15;
+ p0.l = .LWAIT_HERE;
+ p0.h = .LWAIT_HERE;
+ reti = p0;
+#if defined(ANOMALY_05000281)
+ nop; nop; nop;
+#endif
+ rti;
+
+.LWAIT_HERE:
+ jump .LWAIT_HERE;
+
+ENTRY(_real_start)
+ [ -- sp ] = reti;
+ p0.l = lo(WDOG_CTL);
+ p0.h = hi(WDOG_CTL);
+ r0 = 0xAD6(z);
+ w[p0] = r0; /* watchdog off for now */
+ ssync;
+
+ /* Code update for BSS size == 0
+ * Zero out the bss region.
+ */
+
+ p1.l = ___bss_start;
+ p1.h = ___bss_start;
+ p2.l = ___bss_stop;
+ p2.h = ___bss_stop;
+ r0 = 0;
+ p2 -= p1;
+ lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
+.L_clear_bss:
+ B[p1++] = r0;
+
+ /* In case there is a NULL pointer reference
+ * Zero out region before stext
+ */
+
+ p1.l = 0x0;
+ p1.h = 0x0;
+ r0.l = __stext;
+ r0.h = __stext;
+ r0 = r0 >> 1;
+ p2 = r0;
+ r0 = 0;
+ lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
+.L_clear_zero:
+ W[p1++] = r0;
+
+/* pass the uboot arguments to the global value command line */
+ R0 = R7;
+ call _cmdline_init;
+
+ p1.l = __rambase;
+ p1.h = __rambase;
+ r0.l = __sdata;
+ r0.h = __sdata;
+ [p1] = r0;
+
+ p1.l = __ramstart;
+ p1.h = __ramstart;
+ p3.l = ___bss_stop;
+ p3.h = ___bss_stop;
+
+ r1 = p3;
+ [p1] = r1;
+
+ /*
+ * load the current thread pointer and stack
+ */
+ r1.l = _init_thread_union;
+ r1.h = _init_thread_union;
+
+ r2.l = 0x2000;
+ r2.h = 0x0000;
+ r1 = r1 + r2;
+ sp = r1;
+ usp = sp;
+ fp = sp;
+ call _start_kernel;
+.L_exit:
+ jump.s .L_exit;
+
+.section .l1.text
+#if CONFIG_BFIN_KERNEL_CLOCK
+ENTRY(_start_dma_code)
+ p0.h = hi(SIC_IWR);
+ p0.l = lo(SIC_IWR);
+ r0.l = 0x1;
+ r0.h = 0x0;
+ [p0] = r0;
+ SSYNC;
+
+ /*
+ * Set PLL_CTL
+ * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
+ * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK
+ * - [7] = output delay (add 200ps of delay to mem signals)
+ * - [6] = input delay (add 200ps of input delay to mem signals)
+ * - [5] = PDWN : 1=All Clocks off
+ * - [3] = STOPCK : 1=Core Clock off
+ * - [1] = PLL_OFF : 1=Disable Power to PLL
+ * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
+ * all other bits set to zero
+ */
+
+ p0.h = hi(PLL_LOCKCNT);
+ p0.l = lo(PLL_LOCKCNT);
+ r0 = 0x300(Z);
+ w[p0] = r0.l;
+ ssync;
+
+ P2.H = hi(EBIU_SDGCTL);
+ P2.L = lo(EBIU_SDGCTL);
+ R0 = [P2];
+ BITSET (R0, 24);
+ [P2] = R0;
+ SSYNC;
+
+ r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
+ r0 = r0 << 9; /* Shift it over, */
+ r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
+ r0 = r1 | r0;
+ r1 = PLL_BYPASS; /* Bypass the PLL? */
+ r1 = r1 << 8; /* Shift it over */
+ r0 = r1 | r0; /* add them all together */
+
+ p0.h = hi(PLL_CTL);
+ p0.l = lo(PLL_CTL); /* Load the address */
+ cli r2; /* Disable interrupts */
+ ssync;
+ w[p0] = r0.l; /* Set the value */
+ idle; /* Wait for the PLL to stablize */
+ sti r2; /* Enable interrupts */
+
+.Lcheck_again:
+ p0.h = hi(PLL_STAT);
+ p0.l = lo(PLL_STAT);
+ R0 = W[P0](Z);
+ CC = BITTST(R0,5);
+ if ! CC jump .Lcheck_again;
+
+ /* Configure SCLK & CCLK Dividers */
+ r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+ p0.h = hi(PLL_DIV);
+ p0.l = lo(PLL_DIV);
+ w[p0] = r0.l;
+ ssync;
+
+ p0.l = lo(EBIU_SDRRC);
+ p0.h = hi(EBIU_SDRRC);
+ r0 = mem_SDRRC;
+ w[p0] = r0.l;
+ ssync;
+
+ p0.l = (EBIU_SDBCTL & 0xFFFF);
+ p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */
+ r0 = mem_SDBCTL;
+ w[p0] = r0.l;
+ ssync;
+
+ P2.H = hi(EBIU_SDGCTL);
+ P2.L = lo(EBIU_SDGCTL);
+ R0 = [P2];
+ BITCLR (R0, 24);
+ p0.h = hi(EBIU_SDSTAT);
+ p0.l = lo(EBIU_SDSTAT);
+ r2.l = w[p0];
+ cc = bittst(r2,3);
+ if !cc jump .Lskip;
+ NOP;
+ BITSET (R0, 23);
+.Lskip:
+ [P2] = R0;
+ SSYNC;
+
+ R0.L = lo(mem_SDGCTL);
+ R0.H = hi(mem_SDGCTL);
+ R1 = [p2];
+ R1 = R1 | R0;
+ [P2] = R1;
+ SSYNC;
+
+ p0.h = hi(SIC_IWR);
+ p0.l = lo(SIC_IWR);
+ r0.l = lo(IWR_ENABLE_ALL)
+ r0.h = hi(IWR_ENABLE_ALL)
+ [p0] = r0;
+ SSYNC;
+
+ RTS;
+#endif /* CONFIG_BFIN_KERNEL_CLOCK */
+
+ENTRY(_bfin_reset)
+ /* No more interrupts to be handled*/
+ CLI R6;
+ SSYNC;
+
+#if defined(CONFIG_BFIN_SHARED_FLASH_ENET)
+ p0.h = hi(FIO_INEN);
+ p0.l = lo(FIO_INEN);
+ r0.l = ~(1 << CONFIG_ENET_FLASH_PIN);
+ w[p0] = r0.l;
+
+ p0.h = hi(FIO_DIR);
+ p0.l = lo(FIO_DIR);
+ r0.l = (1 << CONFIG_ENET_FLASH_PIN);
+ w[p0] = r0.l;
+
+ p0.h = hi(FIO_FLAG_C);
+ p0.l = lo(FIO_FLAG_C);
+ r0.l = (1 << CONFIG_ENET_FLASH_PIN);
+ w[p0] = r0.l;
+#endif
+
+ /* Clear the bits 13-15 in SWRST if they werent cleared */
+ p0.h = hi(SWRST);
+ p0.l = lo(SWRST);
+ csync;
+ r0.l = w[p0];
+
+ /* Clear the IMASK register */
+ p0.h = hi(IMASK);
+ p0.l = lo(IMASK);
+ r0 = 0x0;
+ [p0] = r0;
+
+ /* Clear the ILAT register */
+ p0.h = hi(ILAT);
+ p0.l = lo(ILAT);
+ r0 = [p0];
+ [p0] = r0;
+ SSYNC;
+
+ /* Disable the WDOG TIMER */
+ p0.h = hi(WDOG_CTL);
+ p0.l = lo(WDOG_CTL);
+ r0.l = 0xAD6;
+ w[p0] = r0.l;
+ SSYNC;
+
+ /* Clear the sticky bit incase it is already set */
+ p0.h = hi(WDOG_CTL);
+ p0.l = lo(WDOG_CTL);
+ r0.l = 0x8AD6;
+ w[p0] = r0.l;
+ SSYNC;
+
+ /* Program the count value */
+ R0.l = 0x100;
+ R0.h = 0x0;
+ P0.h = hi(WDOG_CNT);
+ P0.l = lo(WDOG_CNT);
+ [P0] = R0;
+ SSYNC;
+
+ /* Program WDOG_STAT if necessary */
+ P0.h = hi(WDOG_CTL);
+ P0.l = lo(WDOG_CTL);
+ R0 = W[P0](Z);
+ CC = BITTST(R0,1);
+ if !CC JUMP .LWRITESTAT;
+ CC = BITTST(R0,2);
+ if !CC JUMP .LWRITESTAT;
+ JUMP .LSKIP_WRITE;
+
+.LWRITESTAT:
+ /* When watch dog timer is enabled, a write to STAT will load the contents of CNT to STAT */
+ R0 = 0x0000(z);
+ P0.h = hi(WDOG_STAT);
+ P0.l = lo(WDOG_STAT)
+ [P0] = R0;
+ SSYNC;
+
+.LSKIP_WRITE:
+ /* Enable the reset event */
+ P0.h = hi(WDOG_CTL);
+ P0.l = lo(WDOG_CTL);
+ R0 = W[P0](Z);
+ BITCLR(R0,1);
+ BITCLR(R0,2);
+ W[P0] = R0.L;
+ SSYNC;
+ NOP;
+
+ /* Enable the wdog counter */
+ R0 = W[P0](Z);
+ BITCLR(R0,4);
+ W[P0] = R0.L;
+ SSYNC;
+
+ IDLE;
+
+ RTS;
+
+#if CONFIG_DEBUG_KERNEL_START
+debug_kernel_start_trap:
+ /* Set up a temp stack in L1 - SDRAM might not be working */
+ P0.L = lo(L1_DATA_A_START + 0x100);
+ P0.H = hi(L1_DATA_A_START + 0x100);
+ SP = P0;
+
+ /* Make sure the Clocks are the way I think they should be */
+ r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
+ r0 = r0 << 9; /* Shift it over, */
+ r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
+ r0 = r1 | r0;
+ r1 = PLL_BYPASS; /* Bypass the PLL? */
+ r1 = r1 << 8; /* Shift it over */
+ r0 = r1 | r0; /* add them all together */
+
+ p0.h = hi(PLL_CTL);
+ p0.l = lo(PLL_CTL); /* Load the address */
+ cli r2; /* Disable interrupts */
+ ssync;
+ w[p0] = r0.l; /* Set the value */
+ idle; /* Wait for the PLL to stablize */
+ sti r2; /* Enable interrupts */
+
+.Lcheck_again1:
+ p0.h = hi(PLL_STAT);
+ p0.l = lo(PLL_STAT);
+ R0 = W[P0](Z);
+ CC = BITTST(R0,5);
+ if ! CC jump .Lcheck_again1;
+
+ /* Configure SCLK & CCLK Dividers */
+ r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+ p0.h = hi(PLL_DIV);
+ p0.l = lo(PLL_DIV);
+ w[p0] = r0.l;
+ ssync;
+
+ /* Make sure UART is enabled - you can never be sure */
+
+/*
+ * Setup for console. Argument comes from the menuconfig
+ */
+
+#ifdef CONFIG_BAUD_9600
+#define CONSOLE_BAUD_RATE 9600
+#elif CONFIG_BAUD_19200
+#define CONSOLE_BAUD_RATE 19200
+#elif CONFIG_BAUD_38400
+#define CONSOLE_BAUD_RATE 38400
+#elif CONFIG_BAUD_57600
+#define CONSOLE_BAUD_RATE 57600
+#elif CONFIG_BAUD_115200
+#define CONSOLE_BAUD_RATE 115200
+#endif
+
+ p0.h = hi(UART_GCTL);
+ p0.l = lo(UART_GCTL);
+ r0 = 0x00(Z);
+ w[p0] = r0.L; /* To Turn off UART clocks */
+ ssync;
+
+ p0.h = hi(UART_LCR);
+ p0.l = lo(UART_LCR);
+ r0 = 0x83(Z);
+ w[p0] = r0.L; /* To enable DLL writes */
+ ssync;
+
+ R1 = (((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_SCLK_DIV) / (CONSOLE_BAUD_RATE * 16));
+
+ p0.h = hi(UART_DLL);
+ p0.l = lo(UART_DLL);
+ r0 = 0xFF(Z);
+ r0 = R1 & R0;
+ w[p0] = r0.L;
+ ssync;
+
+ p0.h = hi(UART_DLH);
+ p0.l = lo(UART_DLH);
+ r1 >>= 8 ;
+ w[p0] = r1.L;
+ ssync;
+
+ p0.h = hi(UART_GCTL);
+ p0.l = lo(UART_GCTL);
+ r0 = 0x0(Z);
+ w[p0] = r0.L; /* To enable UART clock */
+ ssync;
+
+ p0.h = hi(UART_LCR);
+ p0.l = lo(UART_LCR);
+ r0 = 0x03(Z);
+ w[p0] = r0.L; /* To Turn on UART */
+ ssync;
+
+ p0.h = hi(UART_GCTL);
+ p0.l = lo(UART_GCTL);
+ r0 = 0x01(Z);
+ w[p0] = r0.L; /* To Turn on UART Clocks */
+ ssync;
+
+ P0.h = hi(UART_THR);
+ P0.l = lo(UART_THR);
+ P1.h = hi(UART_LSR);
+ P1.l = lo(UART_LSR);
+
+ R0.L = 'K';
+ call .Lwait_char;
+ R0.L='e';
+ call .Lwait_char;
+ R0.L='r';
+ call .Lwait_char;
+ R0.L='n'
+ call .Lwait_char;
+ R0.L='e'
+ call .Lwait_char;
+ R0.L='l';
+ call .Lwait_char;
+ R0.L=' ';
+ call .Lwait_char;
+ R0.L='c';
+ call .Lwait_char;
+ R0.L='r';
+ call .Lwait_char;
+ R0.L='a';
+ call .Lwait_char;
+ R0.L='s';
+ call .Lwait_char;
+ R0.L='h';
+ call .Lwait_char;
+ R0.L='\r';
+ call .Lwait_char;
+ R0.L='\n';
+ call .Lwait_char;
+
+ R0.L='S';
+ call .Lwait_char;
+ R0.L='E';
+ call .Lwait_char;
+ R0.L='Q'
+ call .Lwait_char;
+ R0.L='S'
+ call .Lwait_char;
+ R0.L='T';
+ call .Lwait_char;
+ R0.L='A';
+ call .Lwait_char;
+ R0.L='T';
+ call .Lwait_char;
+ R0.L='=';
+ call .Lwait_char;
+ R2 = SEQSTAT;
+ call .Ldump_reg;
+
+ R0.L=' ';
+ call .Lwait_char;
+ R0.L='R';
+ call .Lwait_char;
+ R0.L='E'
+ call .Lwait_char;
+ R0.L='T'
+ call .Lwait_char;
+ R0.L='X';
+ call .Lwait_char;
+ R0.L='=';
+ call .Lwait_char;
+ R2 = RETX;
+ call .Ldump_reg;
+
+ R0.L='\r';
+ call .Lwait_char;
+ R0.L='\n';
+ call .Lwait_char;
+
+.Ldebug_kernel_start_trap_done:
+ JUMP .Ldebug_kernel_start_trap_done;
+.Ldump_reg:
+ R3 = 32;
+ R4 = 0x0F;
+ R5 = ':'; /* one past 9 */
+
+.Ldump_reg2:
+ R0 = R2;
+ R3 += -4;
+ R0 >>>= R3;
+ R0 = R0 & R4;
+ R0 += 0x30;
+ CC = R0 <= R5;
+ if CC JUMP .Ldump_reg1;
+ R0 += 7;
+
+.Ldump_reg1:
+ R1.l = W[P1];
+ CC = BITTST(R1, 5);
+ if !CC JUMP .Ldump_reg1;
+ W[P0] = r0;
+
+ CC = R3 == 0;
+ if !CC JUMP .Ldump_reg2
+ RTS;
+
+.Lwait_char:
+ R1.l = W[P1];
+ CC = BITTST(R1, 5);
+ if !CC JUMP .Lwait_char;
+ W[P0] = r0;
+ RTS;
+
+#endif /* CONFIG_DEBUG_KERNEL_START */
+
+.data
+
+/*
+ * Set up the usable of RAM stuff. Size of RAM is determined then
+ * an initial stack set up at the end.
+ */
+
+.align 4
+__rambase:
+.long 0
+__ramstart:
+.long 0
+__ramend:
+.long 0
diff --git a/arch/blackfin/mach-bf533/ints-priority.c b/arch/blackfin/mach-bf533/ints-priority.c
new file mode 100644
index 000000000000..36a693345204
--- /dev/null
+++ b/arch/blackfin/mach-bf533/ints-priority.c
@@ -0,0 +1,65 @@
+/*
+ * File: arch/blackfin/mach-bf533/ints-priority.c
+ * Based on:
+ * Author: Michael Hennerich
+ *
+ * Created: ?
+ * Description: Set up the interupt priorities
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <asm/blackfin.h>
+#include <asm/irq.h>
+
+void program_IAR(void)
+{
+ /* Program the IAR0 Register with the configured priority */
+ bfin_write_SIC_IAR0(((CONFIG_PLLWAKE_ERROR - 7) << PLLWAKE_ERROR_POS) |
+ ((CONFIG_DMA_ERROR - 7) << DMA_ERROR_POS) |
+ ((CONFIG_PPI_ERROR - 7) << PPI_ERROR_POS) |
+ ((CONFIG_SPORT0_ERROR - 7) << SPORT0_ERROR_POS) |
+ ((CONFIG_SPI_ERROR - 7) << SPI_ERROR_POS) |
+ ((CONFIG_SPORT1_ERROR - 7) << SPORT1_ERROR_POS) |
+ ((CONFIG_UART_ERROR - 7) << UART_ERROR_POS) |
+ ((CONFIG_RTC_ERROR - 7) << RTC_ERROR_POS));
+
+ bfin_write_SIC_IAR1(((CONFIG_DMA0_PPI - 7) << DMA0_PPI_POS) |
+ ((CONFIG_DMA1_SPORT0RX - 7) << DMA1_SPORT0RX_POS) |
+ ((CONFIG_DMA2_SPORT0TX - 7) << DMA2_SPORT0TX_POS) |
+ ((CONFIG_DMA3_SPORT1RX - 7) << DMA3_SPORT1RX_POS) |
+ ((CONFIG_DMA4_SPORT1TX - 7) << DMA4_SPORT1TX_POS) |
+ ((CONFIG_DMA5_SPI - 7) << DMA5_SPI_POS) |
+ ((CONFIG_DMA6_UARTRX - 7) << DMA6_UARTRX_POS) |
+ ((CONFIG_DMA7_UARTTX - 7) << DMA7_UARTTX_POS));
+
+ bfin_write_SIC_IAR2(((CONFIG_TIMER0 - 7) << TIMER0_POS) |
+ ((CONFIG_TIMER1 - 7) << TIMER1_POS) |
+ ((CONFIG_TIMER2 - 7) << TIMER2_POS) |
+ ((CONFIG_PFA - 7) << PFA_POS) |
+ ((CONFIG_PFB - 7) << PFB_POS) |
+ ((CONFIG_MEMDMA0 - 7) << MEMDMA0_POS) |
+ ((CONFIG_MEMDMA1 - 7) << MEMDMA1_POS) |
+ ((CONFIG_WDTIMER - 7) << WDTIMER_POS));
+
+ SSYNC();
+}
diff --git a/arch/blackfin/mach-bf537/Kconfig b/arch/blackfin/mach-bf537/Kconfig
new file mode 100644
index 000000000000..cc9ae38a4dda
--- /dev/null
+++ b/arch/blackfin/mach-bf537/Kconfig
@@ -0,0 +1,141 @@
+if (BF537 || BF534 || BF536)
+
+menu "BF537 Specific Configuration"
+
+comment "PORT F/G Selection"
+choice
+ prompt "Select BF537/6/4 default GPIO PFx PORTx"
+ help
+ Quick Hack for BF537/6/4 default GPIO PFx PORTF.
+
+config BF537_PORT_F
+ bool "Select BF537/6/4 default GPIO PFx PORTF"
+ depends on (BF537 || BF536 || BF534)
+ help
+ Quick Hack for BF537/6/4 default GPIO PFx PORTF.
+
+config BF537_PORT_G
+ bool "Select BF537/6/4 default GPIO PFx PORTG"
+ depends on (BF537 || BF536 || BF534)
+ help
+ Quick Hack for BF537/6/4 default GPIO PFx PORTG.
+
+config BF537_PORT_H
+ bool "Select BF537/6/4 default GPIO PFx PORTH"
+ depends on (BF537 || BF536 || BF534)
+ help
+ Quick Hack for BF537/6/4 default GPIO PFx PORTH
+ Use only when Blackfin EMAC support is not required.
+
+endchoice
+
+comment "Interrupt Priority Assignment"
+menu "Priority"
+
+config IRQ_PLL_WAKEUP
+ int "IRQ_PLL_WAKEUP"
+ default 7
+config IRQ_DMA_ERROR
+ int "IRQ_DMA_ERROR Generic"
+ default 7
+config IRQ_ERROR
+ int "IRQ_ERROR: CAN MAC SPORT0 SPORT1 SPI UART0 UART1"
+ default 7
+config IRQ_RTC
+ int "IRQ_RTC"
+ default 8
+config IRQ_PPI
+ int "IRQ_PPI"
+ default 8
+config IRQ_SPORT0_RX
+ int "IRQ_SPORT0_RX"
+ default 9
+config IRQ_SPORT0_TX
+ int "IRQ_SPORT0_TX"
+ default 9
+config IRQ_SPORT1_RX
+ int "IRQ_SPORT1_RX"
+ default 9
+config IRQ_SPORT1_TX
+ int "IRQ_SPORT1_TX"
+ default 9
+config IRQ_TWI
+ int "IRQ_TWI"
+ default 10
+config IRQ_SPI
+ int "IRQ_SPI"
+ default 10
+config IRQ_UART0_RX
+ int "IRQ_UART0_RX"
+ default 10
+config IRQ_UART0_TX
+ int "IRQ_UART0_TX"
+ default 10
+config IRQ_UART1_RX
+ int "IRQ_UART1_RX"
+ default 10
+config IRQ_UART1_TX
+ int "IRQ_UART1_TX"
+ default 10
+config IRQ_CAN_RX
+ int "IRQ_CAN_RX"
+ default 11
+config IRQ_CAN_TX
+ int "IRQ_CAN_TX"
+ default 11
+config IRQ_MAC_RX
+ int "IRQ_MAC_RX"
+ default 11
+config IRQ_MAC_TX
+ int "IRQ_MAC_TX"
+ default 11
+config IRQ_TMR0
+ int "IRQ_TMR0"
+ default 12
+config IRQ_TMR1
+ int "IRQ_TMR1"
+ default 12
+config IRQ_TMR2
+ int "IRQ_TMR2"
+ default 12
+config IRQ_TMR3
+ int "IRQ_TMR3"
+ default 12
+config IRQ_TMR4
+ int "IRQ_TMR4"
+ default 12
+config IRQ_TMR5
+ int "IRQ_TMR5"
+ default 12
+config IRQ_TMR6
+ int "IRQ_TMR6"
+ default 12
+config IRQ_TMR7
+ int "IRQ_TMR7"
+ default 12
+config IRQ_PROG_INTA
+ int "IRQ_PROG_INTA"
+ default 12
+config IRQ_PORTG_INTB
+ int "IRQ_PORTG_INTB"
+ default 12
+config IRQ_MEM_DMA0
+ int "IRQ_MEM_DMA0"
+ default 13
+config IRQ_MEM_DMA1
+ int "IRQ_MEM_DMA1"
+ default 13
+config IRQ_WATCH
+ int "IRQ_WATCH"
+ default 13
+
+ help
+ Enter the priority numbers between 7-13 ONLY. Others are Reserved.
+ This applies to all the above. It is not recommended to assign the
+ highest priority number 7 to UART or any other device.
+
+endmenu
+
+endmenu
+
+endif
diff --git a/arch/blackfin/mach-bf537/Makefile b/arch/blackfin/mach-bf537/Makefile
new file mode 100644
index 000000000000..f32d44215bb7
--- /dev/null
+++ b/arch/blackfin/mach-bf537/Makefile
@@ -0,0 +1,9 @@
+#
+# arch/blackfin/mach-bf537/Makefile
+#
+
+extra-y := head.o
+
+obj-y := ints-priority.o
+
+obj-$(CONFIG_CPU_FREQ) += cpu.o
diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile
new file mode 100644
index 000000000000..23323cacc3aa
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/Makefile
@@ -0,0 +1,9 @@
+#
+# arch/blackfin/mach-bf537/boards/Makefile
+#
+
+obj-y += eth_mac.o
+obj-$(CONFIG_GENERIC_BOARD) += generic_board.o
+obj-$(CONFIG_BFIN537_STAMP) += stamp.o led.o
+obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o
+obj-$(CONFIG_PNAV10) += pnav10.o
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
new file mode 100644
index 000000000000..6a60618a78ec
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -0,0 +1,364 @@
+/*
+ * File: arch/blackfin/mach-bf537/boards/cm_bf537.c
+ * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
+ * Author: Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created: 2005
+ * Description: Board description file
+ *
+ * Modified:
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/usb_isp1362.h>
+#include <asm/irq.h>
+#include <asm/bfin5xx_spi.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "Bluetechnix CM BF537";
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader",
+ .size = 0x00020000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ },{
+ .name = "kernel",
+ .size = 0xe0000,
+ .offset = 0x20000
+ },{
+ .name = "file system",
+ .size = 0x700000,
+ .offset = 0x00100000,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+ .enable_dma = 1, /* use dma transfer with this chip*/
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+ .enable_dma = 1,
+ .bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+ {
+ .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .controller_data = &spi_adc_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+ {
+ .modalias = "ad1836-spi",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+ .controller_data = &ad1836_spi_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+ {
+ .modalias = "ad9960-spi",
+ .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 1,
+ .controller_data = &ad9960_spi_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+ {
+ .modalias = "spi_mmc_dummy",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 7,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+ {
+ .modalias = "spi_mmc",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SPI_MMC_CS_CHAN,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master spi_bfin_master_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device spi_bfin_master_device = {
+ .name = "bfin-spi-master",
+ .id = 1, /* Bus number */
+ .dev = {
+ .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .start = 0x20200300,
+ .end = 0x20200300 + 16,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF14,
+ .end = IRQ_PF14,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+ {
+ .start = 0x20308000,
+ .end = 0x20308000,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0x20308004,
+ .end = 0x20308004,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PG15,
+ .end = IRQ_PG15,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+ .sel15Kres = 1,
+ .clknotstop = 0,
+ .oc_enable = 0,
+ .int_act_high = 0,
+ .int_edge_triggered = 0,
+ .remote_wakeup_connected = 0,
+ .no_power_switching = 1,
+ .power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+ .name = "isp1362-hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &isp1362_priv,
+ },
+ .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+ .resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+ {
+ .start = 0x20200000,
+ .end = 0x20200000 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF7,
+ .end = IRQ_PF7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device net2272_bfin_device = {
+ .name = "net2272",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(net2272_bfin_resources),
+ .resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0xFFC02000,
+ .end = 0xFFC020FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 1,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mac_device = {
+ .name = "bfin_mac",
+};
+#endif
+
+static struct platform_device *cm_bf537_devices[] __initdata = {
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+ &bfin_sport0_uart_device,
+ &bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+ &isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+ &bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+ &net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &spi_bfin_master_device,
+#endif
+};
+
+static int __init cm_bf537_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+ return 0;
+}
+
+arch_initcall(cm_bf537_init);
diff --git a/arch/blackfin/mach-bf537/boards/eth_mac.c b/arch/blackfin/mach-bf537/boards/eth_mac.c
new file mode 100644
index 000000000000..e129a08d63de
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/eth_mac.c
@@ -0,0 +1,51 @@
+/*
+ * arch/blackfin/mach-bf537/board/eth_mac.c
+ *
+ * Copyright (C) 2007 Analog Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/module.h>
+#include <asm/blackfin.h>
+
+#if defined(CONFIG_GENERIC_BOARD) \
+ || defined(CONFIG_BFIN537_STAMP)
+
+/*
+ * Currently the MAC address is saved in Flash by U-Boot
+ */
+#define FLASH_MAC 0x203f0000
+
+void get_bf537_ether_addr(char *addr)
+{
+ unsigned int flash_mac = (unsigned int) FLASH_MAC;
+ *(u32 *)(&(addr[0])) = bfin_read32(flash_mac);
+ flash_mac += 4;
+ *(u16 *)(&(addr[4])) = bfin_read16(flash_mac);
+}
+
+#else
+
+/*
+ * Provide MAC address function for other specific board setting
+ */
+void get_bf537_ether_addr(char *addr)
+{
+ printk(KERN_WARNING "%s: No valid Ethernet MAC address found\n",__FILE__);
+}
+
+#endif
+
+EXPORT_SYMBOL(get_bf537_ether_addr);
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
new file mode 100644
index 000000000000..9019c0edbe7c
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -0,0 +1,445 @@
+/*
+ * File: arch/blackfin/mach-bf537/boards/generic_board.c
+ * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
+ * Author: Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/usb_isp1362.h>
+#include <asm/irq.h>
+#include <asm/bfin5xx_spi.h>
+#include <linux/usb_sl811.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "UNKNOWN BOARD";
+
+/*
+ * Driver needs to know address, irq and flag pin.
+ */
+
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+static struct resource bfin_pcmcia_cf_resources[] = {
+ {
+ .start = 0x20310000, /* IO PORT */
+ .end = 0x20312000,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0x20311000, /* Attribute Memeory */
+ .end = 0x20311FFF,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PROG_INTA,
+ .end = IRQ_PROG_INTA,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },{
+ .start = IRQ_PF4,
+ .end = IRQ_PF4,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },{
+ .start = 6, /* Card Detect PF6 */
+ .end = 6,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pcmcia_cf_device = {
+ .name = "bfin_cf_pcmcia",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
+ .resource = bfin_pcmcia_cf_resources,
+};
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .name = "smc91x-regs",
+ .start = 0x20300300,
+ .end = 0x20300300 + 16,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PROG_INTB,
+ .end = IRQ_PROG_INTB,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },{
+ /*
+ * denotes the flag pin and is used directly if
+ * CONFIG_IRQCHIP_DEMUX_GPIO is defined.
+ */
+ .start = IRQ_PF7,
+ .end = IRQ_PF7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+static struct resource sl811_hcd_resources[] = {
+ {
+ .start = 0x20340000,
+ .end = 0x20340000,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0x20340004,
+ .end = 0x20340004,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PROG_INTA,
+ .end = IRQ_PROG_INTA,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },{
+ .start = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO,
+ .end = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+void sl811_port_power(struct device *dev, int is_on)
+{
+ unsigned short mask = (1<<CONFIG_USB_SL811_BFIN_GPIO_VBUS);
+
+ bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask);
+ bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask);
+
+ if (is_on)
+ bfin_write_FIO_FLAG_S(mask);
+ else
+ bfin_write_FIO_FLAG_C(mask);
+}
+#endif
+
+static struct sl811_platform_data sl811_priv = {
+ .potpg = 10,
+ .power = 250, /* == 500mA */
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+ .port_power = &sl811_port_power,
+#endif
+};
+
+static struct platform_device sl811_hcd_device = {
+ .name = "sl811-hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &sl811_priv,
+ },
+ .num_resources = ARRAY_SIZE(sl811_hcd_resources),
+ .resource = sl811_hcd_resources,
+};
+
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+ {
+ .start = 0x20360000,
+ .end = 0x20360000,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0x20360004,
+ .end = 0x20360004,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PROG_INTA,
+ .end = IRQ_PROG_INTA,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },{
+ .start = IRQ_PF0 + CONFIG_USB_ISP1362_BFIN_GPIO,
+ .end = IRQ_PF0 + CONFIG_USB_ISP1362_BFIN_GPIO,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+ .sel15Kres = 1,
+ .clknotstop = 0,
+ .oc_enable = 0,
+ .int_act_high = 0,
+ .int_edge_triggered = 0,
+ .remote_wakeup_connected = 0,
+ .no_power_switching = 1,
+ .power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+ .name = "isp1362-hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &isp1362_priv,
+ },
+ .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+ .resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mac_device = {
+ .name = "bfin_mac",
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+ {
+ .start = 0x20300000,
+ .end = 0x20300000 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF7,
+ .end = IRQ_PF7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device net2272_bfin_device = {
+ .name = "net2272",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(net2272_bfin_resources),
+ .resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader",
+ .size = 0x00020000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ },{
+ .name = "kernel",
+ .size = 0xe0000,
+ .offset = 0x20000
+ },{
+ .name = "file system",
+ .size = 0x700000,
+ .offset = 0x00100000,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+ || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+ .enable_dma = 1, /* use dma transfer with this chip*/
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+ || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+ {
+ .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .controller_data = &spi_adc_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+ {
+ .modalias = "ad1836-spi",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+ .controller_data = &ad1836_spi_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+ {
+ .modalias = "ad9960-spi",
+ .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 1,
+ .controller_data = &ad9960_spi_chip_info,
+ },
+#endif
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master spi_bfin_master_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device spi_bfin_master_device = {
+ .name = "bfin-spi-master",
+ .id = 1, /* Bus number */
+ .dev = {
+ .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+static struct platform_device bfin_fb_device = {
+ .name = "bf537-fb",
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0xFFC02000,
+ .end = 0xFFC020FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+static struct platform_device *stamp_devices[] __initdata = {
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+ &bfin_pcmcia_cf_device,
+#endif
+
+#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+ &sl811_hcd_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+ &isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+ &bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+ &net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &spi_bfin_master_device,
+#endif
+
+#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+ &bfin_fb_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+};
+
+static int __init stamp_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+ return 0;
+}
+
+arch_initcall(stamp_init);
diff --git a/arch/blackfin/mach-bf537/boards/led.S b/arch/blackfin/mach-bf537/boards/led.S
new file mode 100644
index 000000000000..4e9ea4283e5f
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/led.S
@@ -0,0 +1,183 @@
+/****************************************************
+ * LED1 ---- PF6 LED2 ---- PF7 *
+ * LED3 ---- PF8 LED4 ---- PF9 *
+ * LED5 ---- PF10 LED6 ---- PF11 *
+ ****************************************************/
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+
+/* All functions in this file save the registers they uses.
+ So there is no need to save any registers before calling them. */
+
+ .text;
+
+/* Initialize LEDs. */
+
+ENTRY(_led_init)
+ LINK 12;
+ [--SP] = P0;
+ [--SP] = R0;
+ [--SP] = R1;
+ [--SP] = R2;
+ R1 = PF6|PF7|PF8|PF9|PF10|PF11 (Z);
+ R2 = ~R1;
+
+ P0.H = hi(PORTF_FER);
+ P0.L = lo(PORTF_FER);
+ R0 = W[P0](Z);
+ SSYNC;
+ R0 = R0 & R2;
+ W[P0] = R0.L;
+ SSYNC;
+
+ P0.H = hi(PORTFIO_DIR);
+ P0.L = lo(PORTFIO_DIR);
+ R0 = W[P0](Z);
+ SSYNC;
+ R0 = R0 | R1;
+ W[P0] = R0.L;
+ SSYNC;
+
+ P0.H = hi(PORTFIO_INEN);
+ P0.L = lo(PORTFIO_INEN);
+ R0 = W[P0](Z);
+ SSYNC;
+ R0 = R0 & R2;
+ W[P0] = R0.L;
+ SSYNC;
+
+ R2 = [SP++];
+ R1 = [SP++];
+ R0 = [SP++];
+ P0 = [SP++];
+ UNLINK;
+ RTS;
+ .size _led_init, .-_led_init
+
+/* Set one LED on. Leave other LEDs unchanged.
+ It expects the LED number passed through R0. */
+
+ENTRY(_led_on)
+ LINK 12;
+ [--SP] = P0;
+ [--SP] = R1;
+ CALL _led_init;
+ R1 = 1;
+ R0 += 5;
+ R1 <<= R0;
+ P0.H = hi(PORTFIO);
+ P0.L = lo(PORTFIO);
+ R0 = W[P0](Z);
+ SSYNC;
+ R0 = R0 | R1;
+ W[P0] = R0.L;
+ SSYNC;
+ R1 = [SP++];
+ P0 = [SP++];
+ UNLINK;
+ RTS;
+ .size _led_on, .-_led_on
+
+/* Set one LED off. Leave other LEDs unchanged. */
+
+ENTRY(_led_off)
+ LINK 12;
+ [--SP] = P0;
+ [--SP] = R1;
+ CALL _led_init;
+ R1 = 1;
+ R0 += 5;
+ R1 <<= R0;
+ R1 = ~R1;
+ P0.H = hi(PORTFIO);
+ P0.L = lo(PORTFIO);
+ R0 = W[P0](Z);
+ SSYNC;
+ R0 = R0 & R1;
+ W[P0] = R0.L;
+ SSYNC;
+ R1 = [SP++];
+ P0 = [SP++];
+ UNLINK;
+ RTS;
+ .size _led_off, .-_led_off
+
+/* Toggle one LED. Leave other LEDs unchanged. */
+
+ENTRY(_led_toggle)
+ LINK 12;
+ [--SP] = P0;
+ [--SP] = R1;
+ CALL _led_init;
+ R1 = 1;
+ R0 += 5;
+ R1 <<= R0;
+ P0.H = hi(PORTFIO);
+ P0.L = lo(PORTFIO);
+ R0 = W[P0](Z);
+ SSYNC;
+ R0 = R0 ^ R1;
+ W[P0] = R0.L;
+ SSYNC;
+ R1 = [SP++];
+ P0 = [SP++];
+ UNLINK;
+ RTS;
+ .size _led_toggle, .-_led_toggle
+
+/* Display the number using LEDs in binary format. */
+
+ENTRY(_led_disp_num)
+ LINK 12;
+ [--SP] = P0;
+ [--SP] = R1;
+ [--SP] = R2;
+ CALL _led_init;
+ R1 = 0x3f(X);
+ R0 = R0 & R1;
+ R2 = 6(X);
+ R0 <<= R2;
+ R1 <<= R2;
+ P0.H = hi(PORTFIO);
+ P0.L = lo(PORTFIO);
+ R2 = W[P0](Z);
+ SSYNC;
+ R1 = ~R1;
+ R2 = R2 & R1;
+ R2 = R2 | R0;
+ W[P0] = R2.L;
+ SSYNC;
+ R2 = [SP++];
+ R1 = [SP++];
+ P0 = [SP++];
+ UNLINK;
+ RTS;
+ .size _led_disp_num, .-_led_disp_num
+
+/* Toggle the number using LEDs in binary format. */
+
+ENTRY(_led_toggle_num)
+ LINK 12;
+ [--SP] = P0;
+ [--SP] = R1;
+ [--SP] = R2;
+ CALL _led_init;
+ R1 = 0x3f(X);
+ R0 = R0 & R1;
+ R1 = 6(X);
+ R0 <<= R1;
+ P0.H = hi(PORTFIO);
+ P0.L = lo(PORTFIO);
+ R1 = W[P0](Z);
+ SSYNC;
+ R1 = R1 ^ R0;
+ W[P0] = R1.L;
+ SSYNC;
+ R2 = [SP++];
+ R1 = [SP++];
+ P0 = [SP++];
+ UNLINK;
+ RTS;
+ .size _led_toggle_num, .-_led_toggle_num
+
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
new file mode 100644
index 000000000000..40d3a1b70ee7
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -0,0 +1,523 @@
+/*
+ * File: arch/blackfin/mach-bf537/boards/stamp.c
+ * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
+ * Author: Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb_isp1362.h>
+#endif
+#include <asm/irq.h>
+#include <asm/bfin5xx_spi.h>
+#include <linux/usb_sl811.h>
+
+#include <linux/spi/ad7877.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "PNAV-1.0";
+
+/*
+ * Driver needs to know address, irq and flag pin.
+ */
+
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+static struct resource bfin_pcmcia_cf_resources[] = {
+ {
+ .start = 0x20310000, /* IO PORT */
+ .end = 0x20312000,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0x20311000, /* Attribute Memeory */
+ .end = 0x20311FFF,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF4,
+ .end = IRQ_PF4,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },{
+ .start = 6, /* Card Detect PF6 */
+ .end = 6,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pcmcia_cf_device = {
+ .name = "bfin_cf_pcmcia",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
+ .resource = bfin_pcmcia_cf_resources,
+};
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .name = "smc91x-regs",
+ .start = 0x20300300,
+ .end = 0x20300300 + 16,
+ .flags = IORESOURCE_MEM,
+ },{
+
+ .start = IRQ_PF7,
+ .end = IRQ_PF7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+static struct resource sl811_hcd_resources[] = {
+ {
+ .start = 0x20340000,
+ .end = 0x20340000,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0x20340004,
+ .end = 0x20340004,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = CONFIG_USB_SL811_BFIN_IRQ,
+ .end = CONFIG_USB_SL811_BFIN_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+void sl811_port_power(struct device *dev, int is_on)
+{
+ unsigned short mask = (1 << CONFIG_USB_SL811_BFIN_GPIO_VBUS);
+
+ bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask);
+ bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask);
+
+ if (is_on)
+ bfin_write_FIO_FLAG_S(mask);
+ else
+ bfin_write_FIO_FLAG_C(mask);
+}
+#endif
+
+static struct sl811_platform_data sl811_priv = {
+ .potpg = 10,
+ .power = 250, /* == 500mA */
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+ .port_power = &sl811_port_power,
+#endif
+};
+
+static struct platform_device sl811_hcd_device = {
+ .name = "sl811-hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &sl811_priv,
+ },
+ .num_resources = ARRAY_SIZE(sl811_hcd_resources),
+ .resource = sl811_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+ {
+ .start = 0x20360000,
+ .end = 0x20360000,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0x20360004,
+ .end = 0x20360004,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
+ .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+ .sel15Kres = 1,
+ .clknotstop = 0,
+ .oc_enable = 0,
+ .int_act_high = 0,
+ .int_edge_triggered = 0,
+ .remote_wakeup_connected = 0,
+ .no_power_switching = 1,
+ .power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+ .name = "isp1362-hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &isp1362_priv,
+ },
+ .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+ .resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mac_device = {
+ .name = "bfin_mac",
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+ {
+ .start = 0x20300000,
+ .end = 0x20300000 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF7,
+ .end = IRQ_PF7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device net2272_bfin_device = {
+ .name = "net2272",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(net2272_bfin_resources),
+ .resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) \
+ || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader",
+ .size = 0x00020000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ },{
+ .name = "kernel",
+ .size = 0xe0000,
+ .offset = 0x20000
+ },{
+ .name = "file system",
+ .size = 0x700000,
+ .offset = 0x00100000,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+ || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+ .enable_dma = 1, /* use dma transfer with this chip*/
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+ || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+ .enable_dma = 1,
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_PBX)
+static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
+ .ctl_reg = 0x4, /* send zero */
+ .enable_dma = 0,
+ .bits_per_word = 8,
+ .cs_change_per_word = 1,
+};
+#endif
+
+
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
+ .cs_change_per_word = 1,
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+ .model = 7877,
+ .vref_delay_usecs = 50, /* internal, no capacitor */
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .pressure_max = 1000,
+ .pressure_min = 0,
+ .stopacq_polarity = 1,
+ .first_conversion_delay = 3,
+ .acquisition_time = 1,
+ .averaging = 1,
+ .pen_down_acc_interval = 1,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) \
+ || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+ || defined(CONFIG_SPI_ADC_BF533_MODULE)
+ {
+ .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .controller_data = &spi_adc_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+ || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+ {
+ .modalias = "ad1836-spi",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+ .controller_data = &ad1836_spi_chip_info,
+ },
+#endif
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+ {
+ .modalias = "ad9960-spi",
+ .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 1,
+ .controller_data = &ad9960_spi_chip_info,
+ },
+#endif
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+ {
+ .modalias = "spi_mmc_dummy",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 7,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+ {
+ .modalias = "spi_mmc",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SPI_MMC_CS_CHAN,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+#if defined(CONFIG_PBX)
+ {
+ .modalias = "fxs-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 3,
+ .controller_data= &spi_si3xxx_chip_info,
+ .mode = SPI_MODE_3,
+ },
+ {
+ .modalias = "fxo-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 2,
+ .controller_data= &spi_si3xxx_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+{
+ .modalias = "ad7877",
+ .platform_data = &bfin_ad7877_ts_info,
+ .irq = IRQ_PF2,
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 5,
+ .controller_data = &spi_ad7877_chip_info,
+},
+#endif
+
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master spi_bfin_master_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device spi_bfin_master_device = {
+ .name = "bfin-spi-master",
+ .id = 1, /* Bus number */
+ .dev = {
+ .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+static struct platform_device bfin_fb_device = {
+ .name = "bf537-fb",
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0xFFC02000,
+ .end = 0xFFC020FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+
+static struct platform_device *stamp_devices[] __initdata = {
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+ &bfin_pcmcia_cf_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
+#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+ &sl811_hcd_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+ &isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+ &bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+ &net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &spi_bfin_master_device,
+#endif
+
+#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+ &bfin_fb_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+};
+
+static int __init stamp_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bfin_spi_board_info,
+ ARRAY_SIZE(bfin_spi_board_info));
+#endif
+ return 0;
+}
+
+arch_initcall(stamp_init);
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
new file mode 100644
index 000000000000..ba2f875a7f7d
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -0,0 +1,615 @@
+/*
+ * File: arch/blackfin/mach-bf537/boards/stamp.c
+ * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
+ * Author: Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb_isp1362.h>
+#endif
+#include <asm/irq.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/bfin5xx_spi.h>
+#include <linux/usb_sl811.h>
+
+#include <linux/spi/ad7877.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "ADDS-BF537-STAMP";
+
+/*
+ * Driver needs to know address, irq and flag pin.
+ */
+
+#define ISP1761_BASE 0x203C0000
+#define ISP1761_IRQ IRQ_PF7
+
+#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+static struct resource bfin_isp1761_resources[] = {
+ [0] = {
+ .name = "isp1761-regs",
+ .start = ISP1761_BASE + 0x00000000,
+ .end = ISP1761_BASE + 0x000fffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = ISP1761_IRQ,
+ .end = ISP1761_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_isp1761_device = {
+ .name = "isp1761",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_isp1761_resources),
+ .resource = bfin_isp1761_resources,
+};
+
+static struct platform_device *bfin_isp1761_devices[] = {
+ &bfin_isp1761_device,
+};
+
+int __init bfin_isp1761_init(void)
+{
+ unsigned int num_devices=ARRAY_SIZE(bfin_isp1761_devices);
+
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING);
+
+ return platform_add_devices(bfin_isp1761_devices, num_devices);
+}
+
+void __exit bfin_isp1761_exit(void)
+{
+ platform_device_unregister(&bfin_isp1761_device);
+}
+
+arch_initcall(bfin_isp1761_init);
+#endif
+
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+static struct resource bfin_pcmcia_cf_resources[] = {
+ {
+ .start = 0x20310000, /* IO PORT */
+ .end = 0x20312000,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0x20311000, /* Attribute Memeory */
+ .end = 0x20311FFF,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF4,
+ .end = IRQ_PF4,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },{
+ .start = 6, /* Card Detect PF6 */
+ .end = 6,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pcmcia_cf_device = {
+ .name = "bfin_cf_pcmcia",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
+ .resource = bfin_pcmcia_cf_resources,
+};
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .name = "smc91x-regs",
+ .start = 0x20300300,
+ .end = 0x20300300 + 16,
+ .flags = IORESOURCE_MEM,
+ },{
+
+ .start = IRQ_PF7,
+ .end = IRQ_PF7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+static struct resource sl811_hcd_resources[] = {
+ {
+ .start = 0x20340000,
+ .end = 0x20340000,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0x20340004,
+ .end = 0x20340004,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = CONFIG_USB_SL811_BFIN_IRQ,
+ .end = CONFIG_USB_SL811_BFIN_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+void sl811_port_power(struct device *dev, int is_on)
+{
+ unsigned short mask = (1 << CONFIG_USB_SL811_BFIN_GPIO_VBUS);
+
+ bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask);
+ bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask);
+
+ if (is_on)
+ bfin_write_FIO_FLAG_S(mask);
+ else
+ bfin_write_FIO_FLAG_C(mask);
+}
+#endif
+
+static struct sl811_platform_data sl811_priv = {
+ .potpg = 10,
+ .power = 250, /* == 500mA */
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+ .port_power = &sl811_port_power,
+#endif
+};
+
+static struct platform_device sl811_hcd_device = {
+ .name = "sl811-hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &sl811_priv,
+ },
+ .num_resources = ARRAY_SIZE(sl811_hcd_resources),
+ .resource = sl811_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+ {
+ .start = 0x20360000,
+ .end = 0x20360000,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0x20360004,
+ .end = 0x20360004,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
+ .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+ .sel15Kres = 1,
+ .clknotstop = 0,
+ .oc_enable = 0,
+ .int_act_high = 0,
+ .int_edge_triggered = 0,
+ .remote_wakeup_connected = 0,
+ .no_power_switching = 1,
+ .power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+ .name = "isp1362-hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &isp1362_priv,
+ },
+ .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+ .resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mac_device = {
+ .name = "bfin_mac",
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+ {
+ .start = 0x20300000,
+ .end = 0x20300000 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF7,
+ .end = IRQ_PF7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device net2272_bfin_device = {
+ .name = "net2272",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(net2272_bfin_resources),
+ .resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) \
+ || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader",
+ .size = 0x00020000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ },{
+ .name = "kernel",
+ .size = 0xe0000,
+ .offset = 0x20000
+ },{
+ .name = "file system",
+ .size = 0x700000,
+ .offset = 0x00100000,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+ || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+ .enable_dma = 1, /* use dma transfer with this chip*/
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+ || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+ .enable_dma = 1,
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_PBX)
+static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
+ .ctl_reg = 0x4, /* send zero */
+ .enable_dma = 0,
+ .bits_per_word = 8,
+ .cs_change_per_word = 1,
+};
+#endif
+
+#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
+static struct bfin5xx_spi_chip ad5304_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
+// .cs_change_per_word = 1,
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+ .model = 7877,
+ .vref_delay_usecs = 50, /* internal, no capacitor */
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .pressure_max = 1000,
+ .pressure_min = 0,
+ .stopacq_polarity = 1,
+ .first_conversion_delay = 3,
+ .acquisition_time = 1,
+ .averaging = 1,
+ .pen_down_acc_interval = 1,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) \
+ || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+ || defined(CONFIG_SPI_ADC_BF533_MODULE)
+ {
+ .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .controller_data = &spi_adc_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+ || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+ {
+ .modalias = "ad1836-spi",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+ .controller_data = &ad1836_spi_chip_info,
+ },
+#endif
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+ {
+ .modalias = "ad9960-spi",
+ .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 1,
+ .controller_data = &ad9960_spi_chip_info,
+ },
+#endif
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+ {
+ .modalias = "spi_mmc_dummy",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 0,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+ {
+ .modalias = "spi_mmc",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SPI_MMC_CS_CHAN,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+#if defined(CONFIG_PBX)
+ {
+ .modalias = "fxs-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 3,
+ .controller_data= &spi_si3xxx_chip_info,
+ .mode = SPI_MODE_3,
+ },
+ {
+ .modalias = "fxo-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 2,
+ .controller_data= &spi_si3xxx_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE)
+ {
+ .modalias = "ad5304_spi",
+ .max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 2,
+ .platform_data = NULL,
+ .controller_data = &ad5304_chip_info,
+ .mode = SPI_MODE_2,
+ },
+#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+ {
+ .modalias = "ad7877",
+ .platform_data = &bfin_ad7877_ts_info,
+ .irq = IRQ_PF6,
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 1,
+ .controller_data = &spi_ad7877_chip_info,
+ },
+#endif
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master spi_bfin_master_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device spi_bfin_master_device = {
+ .name = "bfin-spi-master",
+ .id = 1, /* Bus number */
+ .dev = {
+ .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+static struct platform_device bfin_fb_device = {
+ .name = "bf537-fb",
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0xFFC02000,
+ .end = 0xFFC020FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct platform_device i2c_bfin_twi_device = {
+ .name = "i2c-bfin-twi",
+ .id = 0,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 1,
+};
+#endif
+
+static struct platform_device *stamp_devices[] __initdata = {
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+ &bfin_pcmcia_cf_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
+#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+ &sl811_hcd_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+ &isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+ &bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+ &net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &spi_bfin_master_device,
+#endif
+
+#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+ &bfin_fb_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+ &i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+ &bfin_sport0_uart_device,
+ &bfin_sport1_uart_device,
+#endif
+};
+
+static int __init stamp_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bfin_spi_board_info,
+ ARRAY_SIZE(bfin_spi_board_info));
+#endif
+ return 0;
+}
+
+arch_initcall(stamp_init);
diff --git a/arch/blackfin/mach-bf537/cpu.c b/arch/blackfin/mach-bf537/cpu.c
new file mode 100644
index 000000000000..2d83b7e35469
--- /dev/null
+++ b/arch/blackfin/mach-bf537/cpu.c
@@ -0,0 +1,161 @@
+/*
+ * File: arch/blackfin/mach-bf537/cpu.c
+ * Based on:
+ * Author: michael.kang@analog.com
+ *
+ * Created:
+ * Description: clock scaling for the bf537
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <asm/dpmc.h>
+#include <linux/fs.h>
+#include <asm/bfin-global.h>
+
+/* CONFIG_CLKIN_HZ=11059200 */
+#define VCO5 (CONFIG_CLKIN_HZ*45) /*497664000 */
+#define VCO4 (CONFIG_CLKIN_HZ*36) /*398131200 */
+#define VCO3 (CONFIG_CLKIN_HZ*27) /*298598400 */
+#define VCO2 (CONFIG_CLKIN_HZ*18) /*199065600 */
+#define VCO1 (CONFIG_CLKIN_HZ*9) /*99532800 */
+#define VCO(x) VCO##x
+
+#define FREQ(x) {VCO(x),VCO(x)/4},{VCO(x),VCO(x)/2},{VCO(x),VCO(x)}
+/* frequency */
+static struct cpufreq_frequency_table bf537_freq_table[] = {
+ FREQ(1),
+ FREQ(3),
+ {VCO4, VCO4 / 2}, {VCO4, VCO4},
+ FREQ(5),
+ {0, CPUFREQ_TABLE_END},
+};
+
+/*
+ * dpmc_fops->ioctl()
+ * static int dpmc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+ */
+static int bf537_getfreq(unsigned int cpu)
+{
+ unsigned long cclk_mhz, vco_mhz;
+
+ /* The driver only support single cpu */
+ if (cpu == 0)
+ dpmc_fops.ioctl(NULL, NULL, IOCTL_GET_CORECLOCK, &cclk_mhz);
+ else
+ cclk_mhz = -1;
+ return cclk_mhz;
+}
+
+static int bf537_target(struct cpufreq_policy *policy,
+ unsigned int target_freq, unsigned int relation)
+{
+ unsigned long cclk_mhz;
+ unsigned long vco_mhz;
+ unsigned long flags;
+ unsigned int index, vco_index;
+ int i;
+
+ struct cpufreq_freqs freqs;
+ if (cpufreq_frequency_table_target
+ (policy, bf537_freq_table, target_freq, relation, &index))
+ return -EINVAL;
+ cclk_mhz = bf537_freq_table[index].frequency;
+ vco_mhz = bf537_freq_table[index].index;
+
+ dpmc_fops.ioctl(NULL, NULL, IOCTL_CHANGE_FREQUENCY, &vco_mhz);
+ freqs.old = bf537_getfreq(0);
+ freqs.new = cclk_mhz;
+ freqs.cpu = 0;
+
+ pr_debug("cclk begin change to cclk %d,vco=%d,index=%d,target=%d,oldfreq=%d\n",
+ cclk_mhz, vco_mhz, index, target_freq, freqs.old);
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ local_irq_save(flags);
+ dpmc_fops.ioctl(NULL, NULL, IOCTL_SET_CCLK, &cclk_mhz);
+ local_irq_restore(flags);
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ vco_mhz = get_vco();
+ cclk_mhz = get_cclk();
+ return 0;
+}
+
+/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on
+ * this platform, anyway.
+ */
+static int bf537_verify_speed(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, &bf537_freq_table);
+}
+
+static int __init __bf537_cpu_init(struct cpufreq_policy *policy)
+{
+ int result;
+
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+ policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ /*Now ,only support one cpu */
+ policy->cur = bf537_getfreq(0);
+ cpufreq_frequency_table_get_attr(bf537_freq_table, policy->cpu);
+ return cpufreq_frequency_table_cpuinfo(policy, bf537_freq_table);
+}
+
+static struct freq_attr *bf537_freq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static struct cpufreq_driver bf537_driver = {
+ .verify = bf537_verify_speed,
+ .target = bf537_target,
+ .get = bf537_getfreq,
+ .init = __bf537_cpu_init,
+ .name = "bf537",
+ .owner = THIS_MODULE,
+ .attr = bf537_freq_attr,
+};
+
+static int __init bf537_cpu_init(void)
+{
+ return cpufreq_register_driver(&bf537_driver);
+}
+
+static void __exit bf537_cpu_exit(void)
+{
+ cpufreq_unregister_driver(&bf537_driver);
+}
+
+MODULE_AUTHOR("Mickael Kang");
+MODULE_DESCRIPTION("cpufreq driver for BF537 CPU");
+MODULE_LICENSE("GPL");
+
+module_init(bf537_cpu_init);
+module_exit(bf537_cpu_exit);
diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S
new file mode 100644
index 000000000000..d104e1d8e07a
--- /dev/null
+++ b/arch/blackfin/mach-bf537/head.S
@@ -0,0 +1,602 @@
+/*
+ * File: arch/blackfin/mach-bf537/head.S
+ * Based on: arch/blackfin/mach-bf533/head.S
+ * Author: Jeff Dionne <jeff@uclinux.org> COPYRIGHT 1998 D. Jeff Dionne
+ *
+ * Created: 1998
+ * Description: Startup code for Blackfin BF537
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+#if CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/mach/mem_init.h>
+#endif
+
+.global __rambase
+.global __ramstart
+.global __ramend
+.extern ___bss_stop
+.extern ___bss_start
+.extern _bf53x_relocate_l1_mem
+
+#define INITIAL_STACK 0xFFB01000
+
+.text
+
+ENTRY(__start)
+ENTRY(__stext)
+ /* R0: argument of command line string, passed from uboot, save it */
+ R7 = R0;
+ /* Set the SYSCFG register */
+ R0 = 0x36;
+ SYSCFG = R0; /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/
+ R0 = 0;
+
+ /* Clear Out All the data and pointer Registers*/
+ R1 = R0;
+ R2 = R0;
+ R3 = R0;
+ R4 = R0;
+ R5 = R0;
+ R6 = R0;
+
+ P0 = R0;
+ P1 = R0;
+ P2 = R0;
+ P3 = R0;
+ P4 = R0;
+ P5 = R0;
+
+ LC0 = r0;
+ LC1 = r0;
+ L0 = r0;
+ L1 = r0;
+ L2 = r0;
+ L3 = r0;
+
+ /* Clear Out All the DAG Registers*/
+ B0 = r0;
+ B1 = r0;
+ B2 = r0;
+ B3 = r0;
+
+ I0 = r0;
+ I1 = r0;
+ I2 = r0;
+ I3 = r0;
+
+ M0 = r0;
+ M1 = r0;
+ M2 = r0;
+ M3 = r0;
+
+ /* Turn off the icache */
+ p0.l = (IMEM_CONTROL & 0xFFFF);
+ p0.h = (IMEM_CONTROL >> 16);
+ R1 = [p0];
+ R0 = ~ENICPLB;
+ R0 = R0 & R1;
+
+ /* Anomaly 05000125 */
+#ifdef ANOMALY_05000125
+ CLI R2;
+ SSYNC;
+#endif
+ [p0] = R0;
+ SSYNC;
+#ifdef ANOMALY_05000125
+ STI R2;
+#endif
+
+ /* Turn off the dcache */
+ p0.l = (DMEM_CONTROL & 0xFFFF);
+ p0.h = (DMEM_CONTROL >> 16);
+ R1 = [p0];
+ R0 = ~ENDCPLB;
+ R0 = R0 & R1;
+
+ /* Anomaly 05000125 */
+#ifdef ANOMALY_05000125
+ CLI R2;
+ SSYNC;
+#endif
+ [p0] = R0;
+ SSYNC;
+#ifdef ANOMALY_05000125
+ STI R2;
+#endif
+
+ /* Initialise General-Purpose I/O Modules on BF537 */
+ /* Rev 0.0 Anomaly 05000212 - PORTx_FER,
+ * PORT_MUX Registers Do Not accept "writes" correctly:
+ */
+ p0.h = hi(BFIN_PORT_MUX);
+ p0.l = lo(BFIN_PORT_MUX);
+#ifdef ANOMALY_05000212
+ R0.L = W[P0]; /* Read */
+ SSYNC;
+#endif
+ R0 = (PGDE_UART | PFTE_UART)(Z);
+#ifdef ANOMALY_05000212
+ W[P0] = R0.L; /* Write */
+ SSYNC;
+#endif
+ W[P0] = R0.L; /* Enable both UARTS */
+ SSYNC;
+
+ p0.h = hi(PORTF_FER);
+ p0.l = lo(PORTF_FER);
+#ifdef ANOMALY_05000212
+ R0.L = W[P0]; /* Read */
+ SSYNC;
+#endif
+ R0 = 0x000F(Z);
+#ifdef ANOMALY_05000212
+ W[P0] = R0.L; /* Write */
+ SSYNC;
+#endif
+ /* Enable peripheral function of PORTF for UART0 and UART1 */
+ W[P0] = R0.L;
+ SSYNC;
+
+#if !defined(CONFIG_BF534)
+ p0.h = hi(EMAC_SYSTAT);
+ p0.l = lo(EMAC_SYSTAT);
+ R0.h = 0xFFFF; /* Clear EMAC Interrupt Status bits */
+ R0.l = 0xFFFF;
+ [P0] = R0;
+ SSYNC;
+#endif
+
+#ifdef CONFIG_BF537_PORT_H
+ p0.h = hi(PORTH_FER);
+ p0.l = lo(PORTH_FER);
+ R0.L = W[P0]; /* Read */
+ SSYNC;
+ R0 = 0x0000;
+ W[P0] = R0.L; /* Write */
+ SSYNC;
+ W[P0] = R0.L; /* Disable peripheral function of PORTH */
+ SSYNC;
+#endif
+
+ /*Initialise UART*/
+ p0.h = hi(UART_LCR);
+ p0.l = lo(UART_LCR);
+ r0 = 0x0(Z);
+ w[p0] = r0.L; /* To enable DLL writes */
+ ssync;
+
+ p0.h = hi(UART_DLL);
+ p0.l = lo(UART_DLL);
+ r0 = 0x00(Z);
+ w[p0] = r0.L;
+ ssync;
+
+ p0.h = hi(UART_DLH);
+ p0.l = lo(UART_DLH);
+ r0 = 0x00(Z);
+ w[p0] = r0.L;
+ ssync;
+
+ p0.h = hi(UART_GCTL);
+ p0.l = lo(UART_GCTL);
+ r0 = 0x0(Z);
+ w[p0] = r0.L; /* To enable UART clock */
+ ssync;
+
+ /* Initialize stack pointer */
+ sp.l = lo(INITIAL_STACK);
+ sp.h = hi(INITIAL_STACK);
+ fp = sp;
+ usp = sp;
+
+ /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
+ call _bf53x_relocate_l1_mem;
+#if CONFIG_BFIN_KERNEL_CLOCK
+ call _start_dma_code;
+#endif
+ /* Code for initializing Async memory banks */
+
+ p2.h = hi(EBIU_AMBCTL1);
+ p2.l = lo(EBIU_AMBCTL1);
+ r0.h = hi(AMBCTL1VAL);
+ r0.l = lo(AMBCTL1VAL);
+ [p2] = r0;
+ ssync;
+
+ p2.h = hi(EBIU_AMBCTL0);
+ p2.l = lo(EBIU_AMBCTL0);
+ r0.h = hi(AMBCTL0VAL);
+ r0.l = lo(AMBCTL0VAL);
+ [p2] = r0;
+ ssync;
+
+ p2.h = hi(EBIU_AMGCTL);
+ p2.l = lo(EBIU_AMGCTL);
+ r0 = AMGCTLVAL;
+ w[p2] = r0;
+ ssync;
+
+ /* This section keeps the processor in supervisor mode
+ * during kernel boot. Switches to user mode at end of boot.
+ * See page 3-9 of Hardware Reference manual for documentation.
+ */
+
+ /* EVT15 = _real_start */
+
+ p0.l = lo(EVT15);
+ p0.h = hi(EVT15);
+ p1.l = _real_start;
+ p1.h = _real_start;
+ [p0] = p1;
+ csync;
+
+ p0.l = lo(IMASK);
+ p0.h = hi(IMASK);
+ p1.l = IMASK_IVG15;
+ p1.h = 0x0;
+ [p0] = p1;
+ csync;
+
+ raise 15;
+ p0.l = .LWAIT_HERE;
+ p0.h = .LWAIT_HERE;
+ reti = p0;
+#if defined(ANOMALY_05000281)
+ nop; nop; nop;
+#endif
+ rti;
+
+.LWAIT_HERE:
+ jump .LWAIT_HERE;
+
+ENTRY(_real_start)
+ [ -- sp ] = reti;
+ p0.l = lo(WDOG_CTL);
+ p0.h = hi(WDOG_CTL);
+ r0 = 0xAD6(z);
+ w[p0] = r0; /* watchdog off for now */
+ ssync;
+
+ /* Code update for BSS size == 0
+ * Zero out the bss region.
+ */
+
+ p1.l = ___bss_start;
+ p1.h = ___bss_start;
+ p2.l = ___bss_stop;
+ p2.h = ___bss_stop;
+ r0 = 0;
+ p2 -= p1;
+ lsetup (.L_clear_bss, .L_clear_bss ) lc0 = p2;
+.L_clear_bss:
+ B[p1++] = r0;
+
+ /* In case there is a NULL pointer reference
+ * Zero out region before stext
+ */
+
+ p1.l = 0x0;
+ p1.h = 0x0;
+ r0.l = __stext;
+ r0.h = __stext;
+ r0 = r0 >> 1;
+ p2 = r0;
+ r0 = 0;
+ lsetup (.L_clear_zero, .L_clear_zero ) lc0 = p2;
+.L_clear_zero:
+ W[p1++] = r0;
+
+ /* pass the uboot arguments to the global value command line */
+ R0 = R7;
+ call _cmdline_init;
+
+ p1.l = __rambase;
+ p1.h = __rambase;
+ r0.l = __sdata;
+ r0.h = __sdata;
+ [p1] = r0;
+
+ p1.l = __ramstart;
+ p1.h = __ramstart;
+ p3.l = ___bss_stop;
+ p3.h = ___bss_stop;
+
+ r1 = p3;
+ [p1] = r1;
+
+
+ /*
+ * load the current thread pointer and stack
+ */
+ r1.l = _init_thread_union;
+ r1.h = _init_thread_union;
+
+ r2.l = 0x2000;
+ r2.h = 0x0000;
+ r1 = r1 + r2;
+ sp = r1;
+ usp = sp;
+ fp = sp;
+ call _start_kernel;
+.L_exit:
+ jump.s .L_exit;
+
+.section .l1.text
+#if CONFIG_BFIN_KERNEL_CLOCK
+ENTRY(_start_dma_code)
+
+ /* Enable PHY CLK buffer output */
+ p0.h = hi(VR_CTL);
+ p0.l = lo(VR_CTL);
+ r0.l = w[p0];
+ bitset(r0, 14);
+ w[p0] = r0.l;
+ ssync;
+
+ p0.h = hi(SIC_IWR);
+ p0.l = lo(SIC_IWR);
+ r0.l = 0x1;
+ r0.h = 0x0;
+ [p0] = r0;
+ SSYNC;
+
+ /*
+ * Set PLL_CTL
+ * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
+ * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK
+ * - [7] = output delay (add 200ps of delay to mem signals)
+ * - [6] = input delay (add 200ps of input delay to mem signals)
+ * - [5] = PDWN : 1=All Clocks off
+ * - [3] = STOPCK : 1=Core Clock off
+ * - [1] = PLL_OFF : 1=Disable Power to PLL
+ * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
+ * all other bits set to zero
+ */
+
+ p0.h = hi(PLL_LOCKCNT);
+ p0.l = lo(PLL_LOCKCNT);
+ r0 = 0x300(Z);
+ w[p0] = r0.l;
+ ssync;
+
+ P2.H = hi(EBIU_SDGCTL);
+ P2.L = lo(EBIU_SDGCTL);
+ R0 = [P2];
+ BITSET (R0, 24);
+ [P2] = R0;
+ SSYNC;
+
+ r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
+ r0 = r0 << 9; /* Shift it over, */
+ r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
+ r0 = r1 | r0;
+ r1 = PLL_BYPASS; /* Bypass the PLL? */
+ r1 = r1 << 8; /* Shift it over */
+ r0 = r1 | r0; /* add them all together */
+
+ p0.h = hi(PLL_CTL);
+ p0.l = lo(PLL_CTL); /* Load the address */
+ cli r2; /* Disable interrupts */
+ ssync;
+ w[p0] = r0.l; /* Set the value */
+ idle; /* Wait for the PLL to stablize */
+ sti r2; /* Enable interrupts */
+
+.Lcheck_again:
+ p0.h = hi(PLL_STAT);
+ p0.l = lo(PLL_STAT);
+ R0 = W[P0](Z);
+ CC = BITTST(R0,5);
+ if ! CC jump .Lcheck_again;
+
+ /* Configure SCLK & CCLK Dividers */
+ r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+ p0.h = hi(PLL_DIV);
+ p0.l = lo(PLL_DIV);
+ w[p0] = r0.l;
+ ssync;
+
+ p0.l = lo(EBIU_SDRRC);
+ p0.h = hi(EBIU_SDRRC);
+ r0 = mem_SDRRC;
+ w[p0] = r0.l;
+ ssync;
+
+ p0.l = (EBIU_SDBCTL & 0xFFFF);
+ p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */
+ r0 = mem_SDBCTL;
+ w[p0] = r0.l;
+ ssync;
+
+ P2.H = hi(EBIU_SDGCTL);
+ P2.L = lo(EBIU_SDGCTL);
+ R0 = [P2];
+ BITCLR (R0, 24);
+ p0.h = hi(EBIU_SDSTAT);
+ p0.l = lo(EBIU_SDSTAT);
+ r2.l = w[p0];
+ cc = bittst(r2,3);
+ if !cc jump .Lskip;
+ NOP;
+ BITSET (R0, 23);
+.Lskip:
+ [P2] = R0;
+ SSYNC;
+
+ R0.L = lo(mem_SDGCTL);
+ R0.H = hi(mem_SDGCTL);
+ R1 = [p2];
+ R1 = R1 | R0;
+ [P2] = R1;
+ SSYNC;
+
+ p0.h = hi(SIC_IWR);
+ p0.l = lo(SIC_IWR);
+ r0.l = lo(IWR_ENABLE_ALL);
+ r0.h = hi(IWR_ENABLE_ALL);
+ [p0] = r0;
+ SSYNC;
+
+ RTS;
+#endif /* CONFIG_BFIN_KERNEL_CLOCK */
+
+ENTRY(_bfin_reset)
+ /* No more interrupts to be handled*/
+ CLI R6;
+ SSYNC;
+
+#if defined(CONFIG_MTD_M25P80)
+/*
+ * The following code fix the SPI flash reboot issue,
+ * /CS signal of the chip which is using PF10 return to GPIO mode
+ */
+ p0.h = hi(PORTF_FER);
+ p0.l = lo(PORTF_FER);
+ r0.l = 0x0000;
+ w[p0] = r0.l;
+ SSYNC;
+
+/* /CS return to high */
+ p0.h = hi(PORTFIO);
+ p0.l = lo(PORTFIO);
+ r0.l = 0xFFFF;
+ w[p0] = r0.l;
+ SSYNC;
+
+/* Delay some time, This is necessary */
+ r1.h = 0;
+ r1.l = 0x400;
+ p1 = r1;
+ lsetup (_delay_lab1,_delay_lab1_end ) lc1 = p1;
+_delay_lab1:
+ r0.h = 0;
+ r0.l = 0x8000;
+ p0 = r0;
+ lsetup (_delay_lab0,_delay_lab0_end ) lc0 = p0;
+_delay_lab0:
+ nop;
+_delay_lab0_end:
+ nop;
+_delay_lab1_end:
+ nop;
+#endif
+
+ /* Clear the bits 13-15 in SWRST if they werent cleared */
+ p0.h = hi(SWRST);
+ p0.l = lo(SWRST);
+ csync;
+ r0.l = w[p0];
+
+ /* Clear the IMASK register */
+ p0.h = hi(IMASK);
+ p0.l = lo(IMASK);
+ r0 = 0x0;
+ [p0] = r0;
+
+ /* Clear the ILAT register */
+ p0.h = hi(ILAT);
+ p0.l = lo(ILAT);
+ r0 = [p0];
+ [p0] = r0;
+ SSYNC;
+
+ /* Disable the WDOG TIMER */
+ p0.h = hi(WDOG_CTL);
+ p0.l = lo(WDOG_CTL);
+ r0.l = 0xAD6;
+ w[p0] = r0.l;
+ SSYNC;
+
+ /* Clear the sticky bit incase it is already set */
+ p0.h = hi(WDOG_CTL);
+ p0.l = lo(WDOG_CTL);
+ r0.l = 0x8AD6;
+ w[p0] = r0.l;
+ SSYNC;
+
+ /* Program the count value */
+ R0.l = 0x100;
+ R0.h = 0x0;
+ P0.h = hi(WDOG_CNT);
+ P0.l = lo(WDOG_CNT);
+ [P0] = R0;
+ SSYNC;
+
+ /* Program WDOG_STAT if necessary */
+ P0.h = hi(WDOG_CTL);
+ P0.l = lo(WDOG_CTL);
+ R0 = W[P0](Z);
+ CC = BITTST(R0,1);
+ if !CC JUMP .LWRITESTAT;
+ CC = BITTST(R0,2);
+ if !CC JUMP .LWRITESTAT;
+ JUMP .LSKIP_WRITE;
+
+.LWRITESTAT:
+ /* When watch dog timer is enabled,
+ * a write to STAT will load the contents of CNT to STAT
+ */
+ R0 = 0x0000(z);
+ P0.h = hi(WDOG_STAT);
+ P0.l = lo(WDOG_STAT)
+ [P0] = R0;
+ SSYNC;
+
+.LSKIP_WRITE:
+ /* Enable the reset event */
+ P0.h = hi(WDOG_CTL);
+ P0.l = lo(WDOG_CTL);
+ R0 = W[P0](Z);
+ BITCLR(R0,1);
+ BITCLR(R0,2);
+ W[P0] = R0.L;
+ SSYNC;
+ NOP;
+
+ /* Enable the wdog counter */
+ R0 = W[P0](Z);
+ BITCLR(R0,4);
+ W[P0] = R0.L;
+ SSYNC;
+
+ IDLE;
+
+ RTS;
+
+.data
+
+/*
+ * Set up the usable of RAM stuff. Size of RAM is determined then
+ * an initial stack set up at the end.
+ */
+
+.align 4
+__rambase:
+.long 0
+__ramstart:
+.long 0
+__ramend:
+.long 0
diff --git a/arch/blackfin/mach-bf537/ints-priority.c b/arch/blackfin/mach-bf537/ints-priority.c
new file mode 100644
index 000000000000..fd6308eccbe6
--- /dev/null
+++ b/arch/blackfin/mach-bf537/ints-priority.c
@@ -0,0 +1,74 @@
+/*
+ * File: arch/blackfin/mach-bf537/ints-priority.c
+ * Based on: arch/blackfin/mach-bf533/ints-priority.c
+ * Author: Michael Hennerich
+ *
+ * Created:
+ * Description: Set up the interupt priorities
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <asm/blackfin.h>
+#include <asm/irq.h>
+
+void program_IAR(void)
+{
+ /* Program the IAR0 Register with the configured priority */
+ bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
+ ((CONFIG_IRQ_DMA_ERROR - 7) << IRQ_DMA_ERROR_POS) |
+ ((CONFIG_IRQ_ERROR - 7) << IRQ_ERROR_POS) |
+ ((CONFIG_IRQ_RTC - 7) << IRQ_RTC_POS) |
+ ((CONFIG_IRQ_PPI - 7) << IRQ_PPI_POS) |
+ ((CONFIG_IRQ_SPORT0_RX - 7) << IRQ_SPORT0_RX_POS) |
+ ((CONFIG_IRQ_SPORT0_TX - 7) << IRQ_SPORT0_TX_POS) |
+ ((CONFIG_IRQ_SPORT1_RX - 7) << IRQ_SPORT1_RX_POS));
+
+ bfin_write_SIC_IAR1(((CONFIG_IRQ_SPORT1_TX - 7) << IRQ_SPORT1_TX_POS) |
+ ((CONFIG_IRQ_TWI - 7) << IRQ_TWI_POS) |
+ ((CONFIG_IRQ_SPI - 7) << IRQ_SPI_POS) |
+ ((CONFIG_IRQ_UART0_RX - 7) << IRQ_UART0_RX_POS) |
+ ((CONFIG_IRQ_UART0_TX - 7) << IRQ_UART0_TX_POS) |
+ ((CONFIG_IRQ_UART1_RX - 7) << IRQ_UART1_RX_POS) |
+ ((CONFIG_IRQ_UART1_TX - 7) << IRQ_UART1_TX_POS) |
+ ((CONFIG_IRQ_CAN_RX - 7) << IRQ_CAN_RX_POS));
+
+ bfin_write_SIC_IAR2(((CONFIG_IRQ_CAN_TX - 7) << IRQ_CAN_TX_POS) |
+ ((CONFIG_IRQ_MAC_RX - 7) << IRQ_MAC_RX_POS) |
+ ((CONFIG_IRQ_MAC_TX - 7) << IRQ_MAC_TX_POS) |
+ ((CONFIG_IRQ_TMR0 - 7) << IRQ_TMR0_POS) |
+ ((CONFIG_IRQ_TMR1 - 7) << IRQ_TMR1_POS) |
+ ((CONFIG_IRQ_TMR2 - 7) << IRQ_TMR2_POS) |
+ ((CONFIG_IRQ_TMR3 - 7) << IRQ_TMR3_POS) |
+ ((CONFIG_IRQ_TMR4 - 7) << IRQ_TMR4_POS));
+
+ bfin_write_SIC_IAR3(((CONFIG_IRQ_TMR5 - 7) << IRQ_TMR5_POS) |
+ ((CONFIG_IRQ_TMR6 - 7) << IRQ_TMR6_POS) |
+ ((CONFIG_IRQ_TMR7 - 7) << IRQ_TMR7_POS) |
+ ((CONFIG_IRQ_PROG_INTA - 7) << IRQ_PROG_INTA_POS) |
+ ((CONFIG_IRQ_PORTG_INTB - 7) << IRQ_PORTG_INTB_POS) |
+ ((CONFIG_IRQ_MEM_DMA0 - 7) << IRQ_MEM_DMA0_POS) |
+ ((CONFIG_IRQ_MEM_DMA1 - 7) << IRQ_MEM_DMA1_POS) |
+ ((CONFIG_IRQ_WATCH - 7) << IRQ_WATCH_POS));
+
+ SSYNC();
+}
diff --git a/arch/blackfin/mach-bf561/Kconfig b/arch/blackfin/mach-bf561/Kconfig
new file mode 100644
index 000000000000..0a17c4cf0059
--- /dev/null
+++ b/arch/blackfin/mach-bf561/Kconfig
@@ -0,0 +1,222 @@
+if BF561
+
+menu "BF561 Specific Configuration"
+
+comment "Core B Support"
+
+menu "Core B Support"
+
+config BF561_COREB
+ bool "Enable Core B support"
+ default y
+
+config BF561_COREB_RESET
+ bool "Enable Core B reset support"
+ default n
+ help
+ This requires code in the application that is loaded
+ into Core B. In order to reset, the application needs
+ to install an interrupt handler for Supplemental
+ Interrupt 0, that sets RETI to 0xff600000 and writes
+ bit 11 of SICB_SYSCR when bit 5 of SICA_SYSCR is 0.
+ This causes Core B to stall when Supplemental Interrupt
+ 0 is set, and will reset PC to 0xff600000 when
+ COREB_SRAM_INIT is cleared.
+
+endmenu
+
+comment "Interrupt Priority Assignment"
+
+menu "Priority"
+
+config IRQ_PLL_WAKEUP
+ int "PLL Wakeup Interrupt"
+ default 7
+config IRQ_DMA1_ERROR
+ int "DMA1 Error (generic)"
+ default 7
+config IRQ_DMA2_ERROR
+ int "DMA2 Error (generic)"
+ default 7
+config IRQ_IMDMA_ERROR
+ int "IMDMA Error (generic)"
+ default 7
+config IRQ_PPI0_ERROR
+ int "PPI0 Error Interrupt"
+ default 7
+config IRQ_PPI1_ERROR
+ int "PPI1 Error Interrupt"
+ default 7
+config IRQ_SPORT0_ERROR
+ int "SPORT0 Error Interrupt"
+ default 7
+config IRQ_SPORT1_ERROR
+ int "SPORT1 Error Interrupt"
+ default 7
+config IRQ_SPI_ERROR
+ int "SPI Error Interrupt"
+ default 7
+config IRQ_UART_ERROR
+ int "UART Error Interrupt"
+ default 7
+config IRQ_RESERVED_ERROR
+ int "Reserved Interrupt"
+ default 7
+config IRQ_DMA1_0
+ int "DMA1 0 Interrupt(PPI1)"
+ default 8
+config IRQ_DMA1_1
+ int "DMA1 1 Interrupt(PPI2)"
+ default 8
+config IRQ_DMA1_2
+ int "DMA1 2 Interrupt"
+ default 8
+config IRQ_DMA1_3
+ int "DMA1 3 Interrupt"
+ default 8
+config IRQ_DMA1_4
+ int "DMA1 4 Interrupt"
+ default 8
+config IRQ_DMA1_5
+ int "DMA1 5 Interrupt"
+ default 8
+config IRQ_DMA1_6
+ int "DMA1 6 Interrupt"
+ default 8
+config IRQ_DMA1_7
+ int "DMA1 7 Interrupt"
+ default 8
+config IRQ_DMA1_8
+ int "DMA1 8 Interrupt"
+ default 8
+config IRQ_DMA1_9
+ int "DMA1 9 Interrupt"
+ default 8
+config IRQ_DMA1_10
+ int "DMA1 10 Interrupt"
+ default 8
+config IRQ_DMA1_11
+ int "DMA1 11 Interrupt"
+ default 8
+config IRQ_DMA2_0
+ int "DMA2 0 (SPORT0 RX)"
+ default 9
+config IRQ_DMA2_1
+ int "DMA2 1 (SPORT0 TX)"
+ default 9
+config IRQ_DMA2_2
+ int "DMA2 2 (SPORT1 RX)"
+ default 9
+config IRQ_DMA2_3
+ int "DMA2 3 (SPORT2 TX)"
+ default 9
+config IRQ_DMA2_4
+ int "DMA2 4 (SPI)"
+ default 9
+config IRQ_DMA2_5
+ int "DMA2 5 (UART RX)"
+ default 9
+config IRQ_DMA2_6
+ int "DMA2 6 (UART TX)"
+ default 9
+config IRQ_DMA2_7
+ int "DMA2 7 Interrupt"
+ default 9
+config IRQ_DMA2_8
+ int "DMA2 8 Interrupt"
+ default 9
+config IRQ_DMA2_9
+ int "DMA2 9 Interrupt"
+ default 9
+config IRQ_DMA2_10
+ int "DMA2 10 Interrupt"
+ default 9
+config IRQ_DMA2_11
+ int "DMA2 11 Interrupt"
+ default 9
+config IRQ_TIMER0
+ int "TIMER 0 Interrupt"
+ default 10
+config IRQ_TIMER1
+ int "TIMER 1 Interrupt"
+ default 10
+config IRQ_TIMER2
+ int "TIMER 2 Interrupt"
+ default 10
+config IRQ_TIMER3
+ int "TIMER 3 Interrupt"
+ default 10
+config IRQ_TIMER4
+ int "TIMER 4 Interrupt"
+ default 10
+config IRQ_TIMER5
+ int "TIMER 5 Interrupt"
+ default 10
+config IRQ_TIMER6
+ int "TIMER 6 Interrupt"
+ default 10
+config IRQ_TIMER7
+ int "TIMER 7 Interrupt"
+ default 10
+config IRQ_TIMER8
+ int "TIMER 8 Interrupt"
+ default 10
+config IRQ_TIMER9
+ int "TIMER 9 Interrupt"
+ default 10
+config IRQ_TIMER10
+ int "TIMER 10 Interrupt"
+ default 10
+config IRQ_TIMER11
+ int "TIMER 11 Interrupt"
+ default 10
+config IRQ_PROG0_INTA
+ int "Programmable Flags0 A (8)"
+ default 11
+config IRQ_PROG0_INTB
+ int "Programmable Flags0 B (8)"
+ default 11
+config IRQ_PROG1_INTA
+ int "Programmable Flags1 A (8)"
+ default 11
+config IRQ_PROG1_INTB
+ int "Programmable Flags1 B (8)"
+ default 11
+config IRQ_PROG2_INTA
+ int "Programmable Flags2 A (8)"
+ default 11
+config IRQ_PROG2_INTB
+ int "Programmable Flags2 B (8)"
+ default 11
+config IRQ_DMA1_WRRD0
+ int "MDMA1 0 write/read INT"
+ default 8
+config IRQ_DMA1_WRRD1
+ int "MDMA1 1 write/read INT"
+ default 8
+config IRQ_DMA2_WRRD0
+ int "MDMA2 0 write/read INT"
+ default 9
+config IRQ_DMA2_WRRD1
+ int "MDMA2 1 write/read INT"
+ default 9
+config IRQ_IMDMA_WRRD0
+ int "IMDMA 0 write/read INT"
+ default 12
+config IRQ_IMDMA_WRRD1
+ int "IMDMA 1 write/read INT"
+ default 12
+config IRQ_WDTIMER
+ int "Watch Dog Timer"
+ default 13
+
+ help
+ Enter the priority numbers between 7-13 ONLY. Others are Reserved.
+ This applies to all the above. It is not recommended to assign the
+ highest priority number 7 to UART or any other device.
+
+endmenu
+
+endmenu
+
+endif
diff --git a/arch/blackfin/mach-bf561/Makefile b/arch/blackfin/mach-bf561/Makefile
new file mode 100644
index 000000000000..57f475a55161
--- /dev/null
+++ b/arch/blackfin/mach-bf561/Makefile
@@ -0,0 +1,9 @@
+#
+# arch/blackfin/mach-bf561/Makefile
+#
+
+extra-y := head.o
+
+obj-y := ints-priority.o
+
+obj-$(CONFIG_BF561_COREB) += coreb.o
diff --git a/arch/blackfin/mach-bf561/boards/Makefile b/arch/blackfin/mach-bf561/boards/Makefile
new file mode 100644
index 000000000000..886edc739ab4
--- /dev/null
+++ b/arch/blackfin/mach-bf561/boards/Makefile
@@ -0,0 +1,7 @@
+#
+# arch/blackfin/mach-bf561/boards/Makefile
+#
+
+obj-$(CONFIG_GENERIC_BOARD) += generic_board.o
+obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o
+obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
new file mode 100644
index 000000000000..6824e956d153
--- /dev/null
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -0,0 +1,289 @@
+/*
+ * File: arch/blackfin/mach-bf533/boards/cm_bf561.c
+ * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
+ * Author: Aidan Williams <aidan@nicta.com.au> Copright 2005
+ *
+ * Created: 2006
+ * Description: Board description file
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/usb_isp1362.h>
+#include <asm/irq.h>
+#include <asm/bfin5xx_spi.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "Bluetechnix CM BF561";
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI perpherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader",
+ .size = 0x00020000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ },{
+ .name = "kernel",
+ .size = 0xe0000,
+ .offset = 0x20000
+ },{
+ .name = "file system",
+ .size = 0x700000,
+ .offset = 0x00100000,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+ .enable_dma = 1, /* use dma transfer with this chip*/
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+ .enable_dma = 1,
+ .bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+ {
+ .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .controller_data = &spi_adc_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+ {
+ .modalias = "ad1836-spi",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+ .controller_data = &ad1836_spi_chip_info,
+ },
+#endif
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+ {
+ .modalias = "ad9960-spi",
+ .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 1,
+ .controller_data = &ad9960_spi_chip_info,
+ },
+#endif
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+ {
+ .modalias = "spi_mmc",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SPI_MMC_CS_CHAN,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master spi_bfin_master_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device spi_bfin_master_device = {
+ .name = "bfin-spi-master",
+ .id = 1, /* Bus number */
+ .dev = {
+ .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct resource smc91x_resources[] = {
+ {
+ .name = "smc91x-regs",
+ .start = 0x28000300,
+ .end = 0x28000300 + 16,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF0,
+ .end = IRQ_PF0,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+ {
+ .start = 0x24008000,
+ .end = 0x24008000,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = 0x24008004,
+ .end = 0x24008004,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PF47,
+ .end = IRQ_PF47,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+ .sel15Kres = 1,
+ .clknotstop = 0,
+ .oc_enable = 0,
+ .int_act_high = 0,
+ .int_edge_triggered = 0,
+ .remote_wakeup_connected = 0,
+ .no_power_switching = 1,
+ .power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+ .name = "isp1362-hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &isp1362_priv,
+ },
+ .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+ .resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+static struct platform_device *cm_bf561_devices[] __initdata = {
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+ &isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &spi_bfin_master_device,
+#endif
+
+};
+
+static int __init cm_bf561_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ platform_add_devices(cm_bf561_devices, ARRAY_SIZE(cm_bf561_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+ return 0;
+}
+
+arch_initcall(cm_bf561_init);
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
new file mode 100644
index 000000000000..14eb4f9a68ea
--- /dev/null
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -0,0 +1,147 @@
+/*
+ * File: arch/blackfin/mach-bf561/ezkit.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <asm/irq.h>
+#include <asm/bfin5xx_spi.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "ADDS-BF561-EZKIT";
+
+/*
+ * USB-LAN EzExtender board
+ * Driver needs to know address, irq and flag pin.
+ */
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .name = "smc91x-regs",
+ .start = 0x2C010300,
+ .end = 0x2C010300 + 16,
+ .flags = IORESOURCE_MEM,
+ },{
+
+ .start = IRQ_PF9,
+ .end = IRQ_PF9,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+#ifdef CONFIG_SPI_BFIN
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+ || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+#endif
+
+/* SPI controller data */
+static struct bfin5xx_spi_master spi_bfin_master_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+};
+
+static struct platform_device spi_bfin_master_device = {
+ .name = "bfin-spi-master",
+ .id = 1, /* Bus number */
+ .dev = {
+ .platform_data = &spi_bfin_master_info, /* Passed to driver */
+ },
+};
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+ || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+ {
+ .modalias = "ad1836-spi",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+ .controller_data = &ad1836_spi_chip_info,
+ },
+#endif
+};
+
+static struct platform_device *ezkit_devices[] __initdata = {
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &spi_bfin_master_device,
+#endif
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+};
+
+static int __init ezkit_init(void)
+{
+ int ret;
+
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ ret = platform_add_devices(ezkit_devices,
+ ARRAY_SIZE(ezkit_devices));
+ if (ret < 0)
+ return ret;
+ return spi_register_board_info(bfin_spi_board_info,
+ ARRAY_SIZE(bfin_spi_board_info));
+}
+
+arch_initcall(ezkit_init);
diff --git a/arch/blackfin/mach-bf561/boards/generic_board.c b/arch/blackfin/mach-bf561/boards/generic_board.c
new file mode 100644
index 000000000000..585ecdd2f6a5
--- /dev/null
+++ b/arch/blackfin/mach-bf561/boards/generic_board.c
@@ -0,0 +1,82 @@
+/*
+ * File: arch/blackfin/mach-bf561/generic_board.c
+ * Based on: arch/blackfin/mach-bf533/ezkit.c
+ * Author: Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/irq.h>
+
+char *bfin_board_name = "UNKNOWN BOARD";
+
+/*
+ * Driver needs to know address, irq and flag pin.
+ */
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .start = 0x2C010300,
+ .end = 0x2C010300 + 16,
+ .flags = IORESOURCE_MEM,
+ },{
+ .start = IRQ_PROG_INTB,
+ .end = IRQ_PROG_INTB,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },{
+ /*
+ * denotes the flag pin and is used directly if
+ * CONFIG_IRQCHIP_DEMUX_GPIO is defined.
+ */
+ .start = IRQ_PF9,
+ .end = IRQ_PF9,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+static struct platform_device *generic_board_devices[] __initdata = {
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+};
+
+static int __init generic_board_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ return platform_add_devices(generic_board_devices,
+ ARRAY_SIZE(generic_board_devices));
+}
+
+arch_initcall(generic_board_init);
diff --git a/arch/blackfin/mach-bf561/coreb.c b/arch/blackfin/mach-bf561/coreb.c
new file mode 100644
index 000000000000..b28582fe083c
--- /dev/null
+++ b/arch/blackfin/mach-bf561/coreb.c
@@ -0,0 +1,402 @@
+/*
+ * File: arch/blackfin/mach-bf561/coreb.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: Handle CoreB on a BF561
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/mm.h>
+#include <linux/miscdevice.h>
+#include <linux/device.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <asm/dma.h>
+#include <asm/uaccess.h>
+
+#define MODULE_VER "v0.1"
+
+static spinlock_t coreb_lock;
+static wait_queue_head_t coreb_dma_wait;
+
+#define COREB_IS_OPEN 0x00000001
+#define COREB_IS_RUNNING 0x00000010
+
+#define CMD_COREB_INDEX 1
+#define CMD_COREB_START 2
+#define CMD_COREB_STOP 3
+#define CMD_COREB_RESET 4
+
+#define COREB_MINOR 229
+
+static unsigned long coreb_status = 0;
+static unsigned long coreb_base = 0xff600000;
+static unsigned long coreb_size = 0x4000;
+int coreb_dma_done;
+
+static loff_t coreb_lseek(struct file *file, loff_t offset, int origin);
+static ssize_t coreb_read(struct file *file, char *buf, size_t count,
+ loff_t * ppos);
+static ssize_t coreb_write(struct file *file, const char *buf, size_t count,
+ loff_t * ppos);
+static int coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
+ unsigned long arg);
+static int coreb_open(struct inode *inode, struct file *file);
+static int coreb_release(struct inode *inode, struct file *file);
+
+static irqreturn_t coreb_dma_interrupt(int irq, void *dev_id)
+{
+ clear_dma_irqstat(CH_MEM_STREAM2_DEST);
+ coreb_dma_done = 1;
+ wake_up_interruptible(&coreb_dma_wait);
+ return IRQ_HANDLED;
+}
+
+static ssize_t coreb_write(struct file *file, const char *buf, size_t count,
+ loff_t * ppos)
+{
+ unsigned long p = *ppos;
+ ssize_t wrote = 0;
+
+ if (p + count > coreb_size)
+ return -EFAULT;
+
+ while (count > 0) {
+ int len = count;
+
+ if (len > PAGE_SIZE)
+ len = PAGE_SIZE;
+
+ coreb_dma_done = 0;
+
+ /* Source Channel */
+ set_dma_start_addr(CH_MEM_STREAM2_SRC, (unsigned long)buf);
+ set_dma_x_count(CH_MEM_STREAM2_SRC, len);
+ set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char));
+ set_dma_config(CH_MEM_STREAM2_SRC, RESTART);
+ /* Destination Channel */
+ set_dma_start_addr(CH_MEM_STREAM2_DEST, coreb_base + p);
+ set_dma_x_count(CH_MEM_STREAM2_DEST, len);
+ set_dma_x_modify(CH_MEM_STREAM2_DEST, sizeof(char));
+ set_dma_config(CH_MEM_STREAM2_DEST, WNR | RESTART | DI_EN);
+
+ enable_dma(CH_MEM_STREAM2_SRC);
+ enable_dma(CH_MEM_STREAM2_DEST);
+
+ wait_event_interruptible(coreb_dma_wait, coreb_dma_done);
+
+ disable_dma(CH_MEM_STREAM2_SRC);
+ disable_dma(CH_MEM_STREAM2_DEST);
+
+ count -= len;
+ wrote += len;
+ buf += len;
+ p += len;
+ }
+ *ppos = p;
+ return wrote;
+}
+
+static ssize_t coreb_read(struct file *file, char *buf, size_t count,
+ loff_t * ppos)
+{
+ unsigned long p = *ppos;
+ ssize_t read = 0;
+
+ if ((p + count) > coreb_size)
+ return -EFAULT;
+
+ while (count > 0) {
+ int len = count;
+
+ if (len > PAGE_SIZE)
+ len = PAGE_SIZE;
+
+ coreb_dma_done = 0;
+
+ /* Source Channel */
+ set_dma_start_addr(CH_MEM_STREAM2_SRC, coreb_base + p);
+ set_dma_x_count(CH_MEM_STREAM2_SRC, len);
+ set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char));
+ set_dma_config(CH_MEM_STREAM2_SRC, RESTART);
+ /* Destination Channel */
+ set_dma_start_addr(CH_MEM_STREAM2_DEST, (unsigned long)buf);
+ set_dma_x_count(CH_MEM_STREAM2_DEST, len);
+ set_dma_x_modify(CH_MEM_STREAM2_DEST, sizeof(char));
+ set_dma_config(CH_MEM_STREAM2_DEST, WNR | RESTART | DI_EN);
+
+ enable_dma(CH_MEM_STREAM2_SRC);
+ enable_dma(CH_MEM_STREAM2_DEST);
+
+ wait_event_interruptible(coreb_dma_wait, coreb_dma_done);
+
+ disable_dma(CH_MEM_STREAM2_SRC);
+ disable_dma(CH_MEM_STREAM2_DEST);
+
+ count -= len;
+ read += len;
+ buf += len;
+ p += len;
+ }
+
+ return read;
+}
+
+static loff_t coreb_lseek(struct file *file, loff_t offset, int origin)
+{
+ loff_t ret;
+
+ mutex_lock(&file->f_dentry->d_inode->i_mutex);
+
+ switch (origin) {
+ case 0 /* SEEK_SET */ :
+ if (offset < coreb_size) {
+ file->f_pos = offset;
+ ret = file->f_pos;
+ } else
+ ret = -EINVAL;
+ break;
+ case 1 /* SEEK_CUR */ :
+ if ((offset + file->f_pos) < coreb_size) {
+ file->f_pos += offset;
+ ret = file->f_pos;
+ } else
+ ret = -EINVAL;
+ default:
+ ret = -EINVAL;
+ }
+ mutex_unlock(&file->f_dentry->d_inode->i_mutex);
+ return ret;
+}
+
+static int coreb_open(struct inode *inode, struct file *file)
+{
+ spin_lock_irq(&coreb_lock);
+
+ if (coreb_status & COREB_IS_OPEN)
+ goto out_busy;
+
+ coreb_status |= COREB_IS_OPEN;
+
+ spin_unlock_irq(&coreb_lock);
+ return 0;
+
+ out_busy:
+ spin_unlock_irq(&coreb_lock);
+ return -EBUSY;
+}
+
+static int coreb_release(struct inode *inode, struct file *file)
+{
+ spin_lock_irq(&coreb_lock);
+ coreb_status &= ~COREB_IS_OPEN;
+ spin_unlock_irq(&coreb_lock);
+ return 0;
+}
+
+static int coreb_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ int retval = 0;
+ int coreb_index = 0;
+
+ switch (cmd) {
+ case CMD_COREB_INDEX:
+ if (copy_from_user(&coreb_index, (int *)arg, sizeof(int))) {
+ retval = -EFAULT;
+ break;
+ }
+
+ spin_lock_irq(&coreb_lock);
+ switch (coreb_index) {
+ case 0:
+ coreb_base = 0xff600000;
+ coreb_size = 0x4000;
+ break;
+ case 1:
+ coreb_base = 0xff610000;
+ coreb_size = 0x4000;
+ break;
+ case 2:
+ coreb_base = 0xff500000;
+ coreb_size = 0x8000;
+ break;
+ case 3:
+ coreb_base = 0xff400000;
+ coreb_size = 0x8000;
+ break;
+ default:
+ retval = -EINVAL;
+ break;
+ }
+ spin_unlock_irq(&coreb_lock);
+
+ mutex_lock(&file->f_dentry->d_inode->i_mutex);
+ file->f_pos = 0;
+ mutex_unlock(&file->f_dentry->d_inode->i_mutex);
+ break;
+ case CMD_COREB_START:
+ spin_lock_irq(&coreb_lock);
+ if (coreb_status & COREB_IS_RUNNING) {
+ retval = -EBUSY;
+ break;
+ }
+ printk(KERN_INFO "Starting Core B\n");
+ coreb_status |= COREB_IS_RUNNING;
+ bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~0x0020);
+ SSYNC();
+ spin_lock_irq(&coreb_lock);
+ break;
+#if defined(CONFIG_BF561_COREB_RESET)
+ case CMD_COREB_STOP:
+ spin_lock_irq(&coreb_lock);
+ printk(KERN_INFO "Stopping Core B\n");
+ bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() | 0x0020);
+ bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080);
+ coreb_status &= ~COREB_IS_RUNNING;
+ spin_lock_irq(&coreb_lock);
+ break;
+ case CMD_COREB_RESET:
+ printk(KERN_INFO "Resetting Core B\n");
+ bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080);
+ break;
+#endif
+ }
+
+ return retval;
+}
+
+static struct file_operations coreb_fops = {
+ .owner = THIS_MODULE,
+ .llseek = coreb_lseek,
+ .read = coreb_read,
+ .write = coreb_write,
+ .ioctl = coreb_ioctl,
+ .open = coreb_open,
+ .release = coreb_release
+};
+
+static struct miscdevice coreb_dev = {
+ COREB_MINOR,
+ "coreb",
+ &coreb_fops
+};
+
+static ssize_t coreb_show_status(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf,
+ "Base Address:\t0x%08lx\n"
+ "Core B is %s\n"
+ "SICA_SYSCR:\t%04x\n"
+ "SICB_SYSCR:\t%04x\n"
+ "\n"
+ "IRQ Status:\tCore A\t\tCore B\n"
+ "ISR0:\t\t%08x\t\t%08x\n"
+ "ISR1:\t\t%08x\t\t%08x\n"
+ "IMASK0:\t\t%08x\t\t%08x\n"
+ "IMASK1:\t\t%08x\t\t%08x\n",
+ coreb_base,
+ coreb_status & COREB_IS_RUNNING ? "running" : "stalled",
+ bfin_read_SICA_SYSCR(), bfin_read_SICB_SYSCR(),
+ bfin_read_SICA_ISR0(), bfin_read_SICB_ISR0(),
+ bfin_read_SICA_ISR1(), bfin_read_SICB_ISR0(),
+ bfin_read_SICA_IMASK0(), bfin_read_SICB_IMASK0(),
+ bfin_read_SICA_IMASK1(), bfin_read_SICB_IMASK1());
+}
+
+static DEVICE_ATTR(coreb_status, S_IRUGO, coreb_show_status, NULL);
+
+int __init bf561_coreb_init(void)
+{
+ init_waitqueue_head(&coreb_dma_wait);
+
+ spin_lock_init(&coreb_lock);
+ /* Request the core memory regions for Core B */
+ if (request_mem_region(0xff600000, 0x4000,
+ "Core B - Instruction SRAM") == NULL)
+ goto exit;
+
+ if (request_mem_region(0xFF610000, 0x4000,
+ "Core B - Instruction SRAM") == NULL)
+ goto release_instruction_a_sram;
+
+ if (request_mem_region(0xFF500000, 0x8000,
+ "Core B - Data Bank B SRAM") == NULL)
+ goto release_instruction_b_sram;
+
+ if (request_mem_region(0xff400000, 0x8000,
+ "Core B - Data Bank A SRAM") == NULL)
+ goto release_data_b_sram;
+
+ if (request_dma(CH_MEM_STREAM2_DEST, "Core B - DMA Destination") < 0)
+ goto release_data_a_sram;
+
+ if (request_dma(CH_MEM_STREAM2_SRC, "Core B - DMA Source") < 0)
+ goto release_dma_dest;
+
+ set_dma_callback(CH_MEM_STREAM2_DEST, coreb_dma_interrupt, NULL);
+
+ misc_register(&coreb_dev);
+
+ if (device_create_file(coreb_dev.this_device, &dev_attr_coreb_status))
+ goto release_dma_src;
+
+ printk(KERN_INFO "BF561 Core B driver %s initialized.\n", MODULE_VER);
+ return 0;
+
+ release_dma_src:
+ free_dma(CH_MEM_STREAM2_SRC);
+ release_dma_dest:
+ free_dma(CH_MEM_STREAM2_DEST);
+ release_data_a_sram:
+ release_mem_region(0xff400000, 0x8000);
+ release_data_b_sram:
+ release_mem_region(0xff500000, 0x8000);
+ release_instruction_b_sram:
+ release_mem_region(0xff610000, 0x4000);
+ release_instruction_a_sram:
+ release_mem_region(0xff600000, 0x4000);
+ exit:
+ return -ENOMEM;
+}
+
+void __exit bf561_coreb_exit(void)
+{
+ device_remove_file(coreb_dev.this_device, &dev_attr_coreb_status);
+ misc_deregister(&coreb_dev);
+
+ release_mem_region(0xff610000, 0x4000);
+ release_mem_region(0xff600000, 0x4000);
+ release_mem_region(0xff500000, 0x8000);
+ release_mem_region(0xff400000, 0x8000);
+
+ free_dma(CH_MEM_STREAM2_DEST);
+ free_dma(CH_MEM_STREAM2_SRC);
+}
+
+module_init(bf561_coreb_init);
+module_exit(bf561_coreb_exit);
+
+MODULE_AUTHOR("Bas Vermeulen <bvermeul@blackstar.xs4all.nl>");
+MODULE_DESCRIPTION("BF561 Core B Support");
diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S
new file mode 100644
index 000000000000..7bca478526b9
--- /dev/null
+++ b/arch/blackfin/mach-bf561/head.S
@@ -0,0 +1,512 @@
+/*
+ * File: arch/blackfin/mach-bf561/head.S
+ * Based on: arch/blackfin/mach-bf533/head.S
+ * Author:
+ *
+ * Created:
+ * Description: BF561 startup file
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+#if CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/mach/mem_init.h>
+#endif
+
+.global __rambase
+.global __ramstart
+.global __ramend
+.extern ___bss_stop
+.extern ___bss_start
+.extern _bf53x_relocate_l1_mem
+
+#define INITIAL_STACK 0xFFB01000
+
+.text
+
+ENTRY(__start)
+ENTRY(__stext)
+ /* R0: argument of command line string, passed from uboot, save it */
+ R7 = R0;
+ /* Set the SYSCFG register */
+ R0 = 0x36;
+ SYSCFG = R0; /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/
+ R0 = 0;
+
+ /*Clear Out All the data and pointer Registers*/
+ R1 = R0;
+ R2 = R0;
+ R3 = R0;
+ R4 = R0;
+ R5 = R0;
+ R6 = R0;
+
+ P0 = R0;
+ P1 = R0;
+ P2 = R0;
+ P3 = R0;
+ P4 = R0;
+ P5 = R0;
+
+ LC0 = r0;
+ LC1 = r0;
+ L0 = r0;
+ L1 = r0;
+ L2 = r0;
+ L3 = r0;
+
+ /* Clear Out All the DAG Registers*/
+ B0 = r0;
+ B1 = r0;
+ B2 = r0;
+ B3 = r0;
+
+ I0 = r0;
+ I1 = r0;
+ I2 = r0;
+ I3 = r0;
+
+ M0 = r0;
+ M1 = r0;
+ M2 = r0;
+ M3 = r0;
+
+ /* Turn off the icache */
+ p0.l = (IMEM_CONTROL & 0xFFFF);
+ p0.h = (IMEM_CONTROL >> 16);
+ R1 = [p0];
+ R0 = ~ENICPLB;
+ R0 = R0 & R1;
+
+ /* Anomaly 05000125 */
+#ifdef ANOMALY_05000125
+ CLI R2;
+ SSYNC;
+#endif
+ [p0] = R0;
+ SSYNC;
+#ifdef ANOMALY_05000125
+ STI R2;
+#endif
+
+ /* Turn off the dcache */
+ p0.l = (DMEM_CONTROL & 0xFFFF);
+ p0.h = (DMEM_CONTROL >> 16);
+ R1 = [p0];
+ R0 = ~ENDCPLB;
+ R0 = R0 & R1;
+
+ /* Anomaly 05000125 */
+#ifdef ANOMALY_05000125
+ CLI R2;
+ SSYNC;
+#endif
+ [p0] = R0;
+ SSYNC;
+#ifdef ANOMALY_05000125
+ STI R2;
+#endif
+
+ /* Initialise UART*/
+ p0.h = hi(UART_LCR);
+ p0.l = lo(UART_LCR);
+ r0 = 0x0(Z);
+ w[p0] = r0.L; /* To enable DLL writes */
+ ssync;
+
+ p0.h = hi(UART_DLL);
+ p0.l = lo(UART_DLL);
+ r0 = 0x0(Z);
+ w[p0] = r0.L;
+ ssync;
+
+ p0.h = hi(UART_DLH);
+ p0.l = lo(UART_DLH);
+ r0 = 0x00(Z);
+ w[p0] = r0.L;
+ ssync;
+
+ p0.h = hi(UART_GCTL);
+ p0.l = lo(UART_GCTL);
+ r0 = 0x0(Z);
+ w[p0] = r0.L; /* To enable UART clock */
+ ssync;
+
+ /* Initialize stack pointer */
+ sp.l = lo(INITIAL_STACK);
+ sp.h = hi(INITIAL_STACK);
+ fp = sp;
+ usp = sp;
+
+ /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
+ call _bf53x_relocate_l1_mem;
+#if CONFIG_BFIN_KERNEL_CLOCK
+ call _start_dma_code;
+#endif
+
+ /* Code for initializing Async memory banks */
+
+ p2.h = hi(EBIU_AMBCTL1);
+ p2.l = lo(EBIU_AMBCTL1);
+ r0.h = hi(AMBCTL1VAL);
+ r0.l = lo(AMBCTL1VAL);
+ [p2] = r0;
+ ssync;
+
+ p2.h = hi(EBIU_AMBCTL0);
+ p2.l = lo(EBIU_AMBCTL0);
+ r0.h = hi(AMBCTL0VAL);
+ r0.l = lo(AMBCTL0VAL);
+ [p2] = r0;
+ ssync;
+
+ p2.h = hi(EBIU_AMGCTL);
+ p2.l = lo(EBIU_AMGCTL);
+ r0 = AMGCTLVAL;
+ w[p2] = r0;
+ ssync;
+
+ /* This section keeps the processor in supervisor mode
+ * during kernel boot. Switches to user mode at end of boot.
+ * See page 3-9 of Hardware Reference manual for documentation.
+ */
+
+ /* EVT15 = _real_start */
+
+ p0.l = lo(EVT15);
+ p0.h = hi(EVT15);
+ p1.l = _real_start;
+ p1.h = _real_start;
+ [p0] = p1;
+ csync;
+
+ p0.l = lo(IMASK);
+ p0.h = hi(IMASK);
+ p1.l = IMASK_IVG15;
+ p1.h = 0x0;
+ [p0] = p1;
+ csync;
+
+ raise 15;
+ p0.l = .LWAIT_HERE;
+ p0.h = .LWAIT_HERE;
+ reti = p0;
+#if defined(ANOMALY_05000281)
+ nop; nop; nop;
+#endif
+ rti;
+
+.LWAIT_HERE:
+ jump .LWAIT_HERE;
+
+ENTRY(_real_start)
+ [ -- sp ] = reti;
+ p0.l = lo(WDOGA_CTL);
+ p0.h = hi(WDOGA_CTL);
+ r0 = 0xAD6(z);
+ w[p0] = r0; /* watchdog off for now */
+ ssync;
+
+ /* Code update for BSS size == 0
+ * Zero out the bss region.
+ */
+
+ p1.l = ___bss_start;
+ p1.h = ___bss_start;
+ p2.l = ___bss_stop;
+ p2.h = ___bss_stop;
+ r0 = 0;
+ p2 -= p1;
+ lsetup (.L_clear_bss, .L_clear_bss ) lc0 = p2;
+.L_clear_bss:
+ B[p1++] = r0;
+
+ /* In case there is a NULL pointer reference
+ * Zero out region before stext
+ */
+
+ p1.l = 0x0;
+ p1.h = 0x0;
+ r0.l = __stext;
+ r0.h = __stext;
+ r0 = r0 >> 1;
+ p2 = r0;
+ r0 = 0;
+ lsetup (.L_clear_zero, .L_clear_zero ) lc0 = p2;
+.L_clear_zero:
+ W[p1++] = r0;
+
+/* pass the uboot arguments to the global value command line */
+ R0 = R7;
+ call _cmdline_init;
+
+ p1.l = __rambase;
+ p1.h = __rambase;
+ r0.l = __sdata;
+ r0.h = __sdata;
+ [p1] = r0;
+
+ p1.l = __ramstart;
+ p1.h = __ramstart;
+ p3.l = ___bss_stop;
+ p3.h = ___bss_stop;
+
+ r1 = p3;
+ [p1] = r1;
+
+ /*
+ * load the current thread pointer and stack
+ */
+ r1.l = _init_thread_union;
+ r1.h = _init_thread_union;
+
+ r2.l = 0x2000;
+ r2.h = 0x0000;
+ r1 = r1 + r2;
+ sp = r1;
+ usp = sp;
+ fp = sp;
+ call _start_kernel;
+.L_exit:
+ jump.s .L_exit;
+
+.section .l1.text
+#if CONFIG_BFIN_KERNEL_CLOCK
+ENTRY(_start_dma_code)
+ p0.h = hi(SICA_IWR0);
+ p0.l = lo(SICA_IWR0);
+ r0.l = 0x1;
+ [p0] = r0;
+ SSYNC;
+
+ /*
+ * Set PLL_CTL
+ * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
+ * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK
+ * - [7] = output delay (add 200ps of delay to mem signals)
+ * - [6] = input delay (add 200ps of input delay to mem signals)
+ * - [5] = PDWN : 1=All Clocks off
+ * - [3] = STOPCK : 1=Core Clock off
+ * - [1] = PLL_OFF : 1=Disable Power to PLL
+ * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
+ * all other bits set to zero
+ */
+
+ p0.h = hi(PLL_LOCKCNT);
+ p0.l = lo(PLL_LOCKCNT);
+ r0 = 0x300(Z);
+ w[p0] = r0.l;
+ ssync;
+
+ P2.H = hi(EBIU_SDGCTL);
+ P2.L = lo(EBIU_SDGCTL);
+ R0 = [P2];
+ BITSET (R0, 24);
+ [P2] = R0;
+ SSYNC;
+
+ r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
+ r0 = r0 << 9; /* Shift it over, */
+ r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
+ r0 = r1 | r0;
+ r1 = PLL_BYPASS; /* Bypass the PLL? */
+ r1 = r1 << 8; /* Shift it over */
+ r0 = r1 | r0; /* add them all together */
+
+ p0.h = hi(PLL_CTL);
+ p0.l = lo(PLL_CTL); /* Load the address */
+ cli r2; /* Disable interrupts */
+ ssync;
+ w[p0] = r0.l; /* Set the value */
+ idle; /* Wait for the PLL to stablize */
+ sti r2; /* Enable interrupts */
+
+.Lcheck_again:
+ p0.h = hi(PLL_STAT);
+ p0.l = lo(PLL_STAT);
+ R0 = W[P0](Z);
+ CC = BITTST(R0,5);
+ if ! CC jump .Lcheck_again;
+
+ /* Configure SCLK & CCLK Dividers */
+ r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+ p0.h = hi(PLL_DIV);
+ p0.l = lo(PLL_DIV);
+ w[p0] = r0.l;
+ ssync;
+
+ p0.l = lo(EBIU_SDRRC);
+ p0.h = hi(EBIU_SDRRC);
+ r0 = mem_SDRRC;
+ w[p0] = r0.l;
+ ssync;
+
+ p0.l = (EBIU_SDBCTL & 0xFFFF);
+ p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */
+ r0 = mem_SDBCTL;
+ w[p0] = r0.l;
+ ssync;
+
+ P2.H = hi(EBIU_SDGCTL);
+ P2.L = lo(EBIU_SDGCTL);
+ R0 = [P2];
+ BITCLR (R0, 24);
+ p0.h = hi(EBIU_SDSTAT);
+ p0.l = lo(EBIU_SDSTAT);
+ r2.l = w[p0];
+ cc = bittst(r2,3);
+ if !cc jump .Lskip;
+ NOP;
+ BITSET (R0, 23);
+.Lskip:
+ [P2] = R0;
+ SSYNC;
+
+ R0.L = lo(mem_SDGCTL);
+ R0.H = hi(mem_SDGCTL);
+ R1 = [p2];
+ R1 = R1 | R0;
+ [P2] = R1;
+ SSYNC;
+
+ RTS;
+#endif /* CONFIG_BFIN_KERNEL_CLOCK */
+
+ENTRY(_bfin_reset)
+ /* No more interrupts to be handled*/
+ CLI R6;
+ SSYNC;
+
+#if defined(CONFIG_BFIN_SHARED_FLASH_ENET)
+ p0.h = hi(FIO_INEN);
+ p0.l = lo(FIO_INEN);
+ r0.l = ~(PF1 | PF0);
+ w[p0] = r0.l;
+
+ p0.h = hi(FIO_DIR);
+ p0.l = lo(FIO_DIR);
+ r0.l = (PF1 | PF0);
+ w[p0] = r0.l;
+
+ p0.h = hi(FIO_FLAG_C);
+ p0.l = lo(FIO_FLAG_C);
+ r0.l = (PF1 | PF0);
+ w[p0] = r0.l;
+#endif
+
+ /* Clear the bits 13-15 in SWRST if they werent cleared */
+ p0.h = hi(SICA_SWRST);
+ p0.l = lo(SICA_SWRST);
+ csync;
+ r0.l = w[p0];
+
+ /* Clear the IMASK register */
+ p0.h = hi(IMASK);
+ p0.l = lo(IMASK);
+ r0 = 0x0;
+ [p0] = r0;
+
+ /* Clear the ILAT register */
+ p0.h = hi(ILAT);
+ p0.l = lo(ILAT);
+ r0 = [p0];
+ [p0] = r0;
+ SSYNC;
+
+ /* Disable the WDOG TIMER */
+ p0.h = hi(WDOGA_CTL);
+ p0.l = lo(WDOGA_CTL);
+ r0.l = 0xAD6;
+ w[p0] = r0.l;
+ SSYNC;
+
+ /* Clear the sticky bit incase it is already set */
+ p0.h = hi(WDOGA_CTL);
+ p0.l = lo(WDOGA_CTL);
+ r0.l = 0x8AD6;
+ w[p0] = r0.l;
+ SSYNC;
+
+ /* Program the count value */
+ R0.l = 0x100;
+ R0.h = 0x0;
+ P0.h = hi(WDOGA_CNT);
+ P0.l = lo(WDOGA_CNT);
+ [P0] = R0;
+ SSYNC;
+
+ /* Program WDOG_STAT if necessary */
+ P0.h = hi(WDOGA_CTL);
+ P0.l = lo(WDOGA_CTL);
+ R0 = W[P0](Z);
+ CC = BITTST(R0,1);
+ if !CC JUMP .LWRITESTAT;
+ CC = BITTST(R0,2);
+ if !CC JUMP .LWRITESTAT;
+ JUMP .LSKIP_WRITE;
+
+.LWRITESTAT:
+ /* When watch dog timer is enabled,
+ * a write to STAT will load the contents of CNT to STAT
+ */
+ R0 = 0x0000(z);
+ P0.h = hi(WDOGA_STAT);
+ P0.l = lo(WDOGA_STAT)
+ [P0] = R0;
+ SSYNC;
+
+.LSKIP_WRITE:
+ /* Enable the reset event */
+ P0.h = hi(WDOGA_CTL);
+ P0.l = lo(WDOGA_CTL);
+ R0 = W[P0](Z);
+ BITCLR(R0,1);
+ BITCLR(R0,2);
+ W[P0] = R0.L;
+ SSYNC;
+ NOP;
+
+ /* Enable the wdog counter */
+ R0 = W[P0](Z);
+ BITCLR(R0,4);
+ W[P0] = R0.L;
+ SSYNC;
+
+ IDLE;
+
+ RTS;
+
+.data
+
+/*
+ * Set up the usable of RAM stuff. Size of RAM is determined then
+ * an initial stack set up at the end.
+ */
+
+.align 4
+__rambase:
+.long 0
+__ramstart:
+.long 0
+__ramend:
+.long 0
diff --git a/arch/blackfin/mach-bf561/ints-priority.c b/arch/blackfin/mach-bf561/ints-priority.c
new file mode 100644
index 000000000000..89c52ff95b27
--- /dev/null
+++ b/arch/blackfin/mach-bf561/ints-priority.c
@@ -0,0 +1,108 @@
+/*
+ * File: arch/blackfin/mach-bf561/ints-priority.c
+ * Based on: arch/blackfin/mach-bf537/ints-priority.c
+ * Author: Michael Hennerich
+ *
+ * Created:
+ * Description: Set up the interupt priorities
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <asm/blackfin.h>
+#include <asm/irq.h>
+
+void program_IAR(void)
+{
+ /* Program the IAR0 Register with the configured priority */
+ bfin_write_SICA_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
+ ((CONFIG_IRQ_DMA1_ERROR - 7) << IRQ_DMA1_ERROR_POS) |
+ ((CONFIG_IRQ_DMA2_ERROR - 7) << IRQ_DMA2_ERROR_POS) |
+ ((CONFIG_IRQ_IMDMA_ERROR - 7) << IRQ_IMDMA_ERROR_POS) |
+ ((CONFIG_IRQ_PPI0_ERROR - 7) << IRQ_PPI0_ERROR_POS) |
+ ((CONFIG_IRQ_PPI1_ERROR - 7) << IRQ_PPI1_ERROR_POS) |
+ ((CONFIG_IRQ_SPORT0_ERROR - 7) << IRQ_SPORT0_ERROR_POS) |
+ ((CONFIG_IRQ_SPORT1_ERROR - 7) << IRQ_SPORT1_ERROR_POS));
+
+ bfin_write_SICA_IAR1(((CONFIG_IRQ_SPI_ERROR - 7) << IRQ_SPI_ERROR_POS) |
+ ((CONFIG_IRQ_UART_ERROR - 7) << IRQ_UART_ERROR_POS) |
+ ((CONFIG_IRQ_RESERVED_ERROR - 7) << IRQ_RESERVED_ERROR_POS) |
+ ((CONFIG_IRQ_DMA1_0 - 7) << IRQ_DMA1_0_POS) |
+ ((CONFIG_IRQ_DMA1_1 - 7) << IRQ_DMA1_1_POS) |
+ ((CONFIG_IRQ_DMA1_2 - 7) << IRQ_DMA1_2_POS) |
+ ((CONFIG_IRQ_DMA1_3 - 7) << IRQ_DMA1_3_POS) |
+ ((CONFIG_IRQ_DMA1_4 - 7) << IRQ_DMA1_4_POS));
+
+ bfin_write_SICA_IAR2(((CONFIG_IRQ_DMA1_5 - 7) << IRQ_DMA1_5_POS) |
+ ((CONFIG_IRQ_DMA1_6 - 7) << IRQ_DMA1_6_POS) |
+ ((CONFIG_IRQ_DMA1_7 - 7) << IRQ_DMA1_7_POS) |
+ ((CONFIG_IRQ_DMA1_8 - 7) << IRQ_DMA1_8_POS) |
+ ((CONFIG_IRQ_DMA1_9 - 7) << IRQ_DMA1_9_POS) |
+ ((CONFIG_IRQ_DMA1_10 - 7) << IRQ_DMA1_10_POS) |
+ ((CONFIG_IRQ_DMA1_11 - 7) << IRQ_DMA1_11_POS) |
+ ((CONFIG_IRQ_DMA2_0 - 7) << IRQ_DMA2_0_POS));
+
+ bfin_write_SICA_IAR3(((CONFIG_IRQ_DMA2_1 - 7) << IRQ_DMA2_1_POS) |
+ ((CONFIG_IRQ_DMA2_2 - 7) << IRQ_DMA2_2_POS) |
+ ((CONFIG_IRQ_DMA2_3 - 7) << IRQ_DMA2_3_POS) |
+ ((CONFIG_IRQ_DMA2_4 - 7) << IRQ_DMA2_4_POS) |
+ ((CONFIG_IRQ_DMA2_5 - 7) << IRQ_DMA2_5_POS) |
+ ((CONFIG_IRQ_DMA2_6 - 7) << IRQ_DMA2_6_POS) |
+ ((CONFIG_IRQ_DMA2_7 - 7) << IRQ_DMA2_7_POS) |
+ ((CONFIG_IRQ_DMA2_8 - 7) << IRQ_DMA2_8_POS));
+
+ bfin_write_SICA_IAR4(((CONFIG_IRQ_DMA2_9 - 7) << IRQ_DMA2_9_POS) |
+ ((CONFIG_IRQ_DMA2_10 - 7) << IRQ_DMA2_10_POS) |
+ ((CONFIG_IRQ_DMA2_11 - 7) << IRQ_DMA2_11_POS) |
+ ((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) |
+ ((CONFIG_IRQ_TIMER1 - 7) << IRQ_TIMER1_POS) |
+ ((CONFIG_IRQ_TIMER2 - 7) << IRQ_TIMER2_POS) |
+ ((CONFIG_IRQ_TIMER3 - 7) << IRQ_TIMER3_POS) |
+ ((CONFIG_IRQ_TIMER4 - 7) << IRQ_TIMER4_POS));
+
+ bfin_write_SICA_IAR5(((CONFIG_IRQ_TIMER5 - 7) << IRQ_TIMER5_POS) |
+ ((CONFIG_IRQ_TIMER6 - 7) << IRQ_TIMER6_POS) |
+ ((CONFIG_IRQ_TIMER7 - 7) << IRQ_TIMER7_POS) |
+ ((CONFIG_IRQ_TIMER8 - 7) << IRQ_TIMER8_POS) |
+ ((CONFIG_IRQ_TIMER9 - 7) << IRQ_TIMER9_POS) |
+ ((CONFIG_IRQ_TIMER10 - 7) << IRQ_TIMER10_POS) |
+ ((CONFIG_IRQ_TIMER11 - 7) << IRQ_TIMER11_POS) |
+ ((CONFIG_IRQ_PROG0_INTA - 7) << IRQ_PROG0_INTA_POS));
+
+ bfin_write_SICA_IAR6(((CONFIG_IRQ_PROG0_INTB - 7) << IRQ_PROG0_INTB_POS) |
+ ((CONFIG_IRQ_PROG1_INTA - 7) << IRQ_PROG1_INTA_POS) |
+ ((CONFIG_IRQ_PROG1_INTB - 7) << IRQ_PROG1_INTB_POS) |
+ ((CONFIG_IRQ_PROG2_INTA - 7) << IRQ_PROG2_INTA_POS) |
+ ((CONFIG_IRQ_PROG2_INTB - 7) << IRQ_PROG2_INTB_POS) |
+ ((CONFIG_IRQ_DMA1_WRRD0 - 7) << IRQ_DMA1_WRRD0_POS) |
+ ((CONFIG_IRQ_DMA1_WRRD1 - 7) << IRQ_DMA1_WRRD1_POS) |
+ ((CONFIG_IRQ_DMA2_WRRD0 - 7) << IRQ_DMA2_WRRD0_POS));
+
+ bfin_write_SICA_IAR7(((CONFIG_IRQ_DMA2_WRRD1 - 7) << IRQ_DMA2_WRRD1_POS) |
+ ((CONFIG_IRQ_IMDMA_WRRD0 - 7) << IRQ_IMDMA_WRRD0_POS) |
+ ((CONFIG_IRQ_IMDMA_WRRD1 - 7) << IRQ_IMDMA_WRRD1_POS) |
+ ((CONFIG_IRQ_WDTIMER - 7) << IRQ_WDTIMER_POS) |
+ (0 << IRQ_RESERVED_1_POS) | (0 << IRQ_RESERVED_2_POS) |
+ (0 << IRQ_SUPPLE_0_POS) | (0 << IRQ_SUPPLE_1_POS));
+
+ SSYNC();
+}
diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile
new file mode 100644
index 000000000000..d3a49073d196
--- /dev/null
+++ b/arch/blackfin/mach-common/Makefile
@@ -0,0 +1,12 @@
+#
+# arch/blackfin/mach-common/Makefile
+#
+
+obj-y := \
+ cache.o cacheinit.o cplbhdlr.o cplbmgr.o entry.o \
+ interrupt.o lock.o dpmc.o irqpanic.o
+
+obj-$(CONFIG_CPLB_INFO) += cplbinfo.o
+obj-$(CONFIG_BFIN_SINGLE_CORE) += ints-priority-sc.o
+obj-$(CONFIG_BFIN_DUAL_CORE) += ints-priority-dc.o
+obj-$(CONFIG_PM) += pm.o
diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S
new file mode 100644
index 000000000000..bb9446ef66ef
--- /dev/null
+++ b/arch/blackfin/mach-common/cache.S
@@ -0,0 +1,253 @@
+/*
+ * File: arch/blackfin/mach-common/cache.S
+ * Based on:
+ * Author: LG Soft India
+ *
+ * Created:
+ * Description: cache control support
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/cplb.h>
+#include <asm/entry.h>
+#include <asm/blackfin.h>
+#include <asm/cache.h>
+
+.text
+.align 2
+ENTRY(_cache_invalidate)
+
+ /*
+ * Icache or DcacheA or DcacheB Invalidation
+ * or any combination thereof
+ * R0 has bits
+ * CPLB_ENABLE_ICACHE_P,CPLB_ENABLE_DCACHE_P,CPLB_ENABLE_DCACHE2_P
+ * set as required
+ */
+ [--SP] = R7;
+
+ R7 = R0;
+ CC = BITTST(R7,CPLB_ENABLE_ICACHE_P);
+ IF !CC JUMP .Lno_icache;
+ [--SP] = RETS;
+ CALL _icache_invalidate;
+ RETS = [SP++];
+.Lno_icache:
+ CC = BITTST(R7,CPLB_ENABLE_DCACHE_P);
+ IF !CC JUMP .Lno_dcache_a;
+ R0 = 0; /* specifies bank A */
+ [--SP] = RETS;
+ CALL _dcache_invalidate;
+ RETS = [SP++];
+.Lno_dcache_a:
+ CC = BITTST(R7,CPLB_ENABLE_DCACHE2_P);
+ IF !CC JUMP .Lno_dcache_b;
+ R0 = 0;
+ BITSET(R0, 23); /* specifies bank B */
+ [--SP] = RETS;
+ CALL _dcache_invalidate;
+ RETS = [SP++];
+.Lno_dcache_b:
+ R7 = [SP++];
+ RTS;
+
+/* Invalidate the Entire Instruction cache by
+ * disabling IMC bit
+ */
+ENTRY(_icache_invalidate)
+ENTRY(_invalidate_entire_icache)
+ [--SP] = ( R7:5);
+
+ P0.L = (IMEM_CONTROL & 0xFFFF);
+ P0.H = (IMEM_CONTROL >> 16);
+ R7 = [P0];
+
+ /* Clear the IMC bit , All valid bits in the instruction
+ * cache are set to the invalid state
+ */
+ BITCLR(R7,IMC_P);
+ CLI R6;
+ SSYNC; /* SSYNC required before invalidating cache. */
+ .align 8;
+ [P0] = R7;
+ SSYNC;
+ STI R6;
+
+ /* Configures the instruction cache agian */
+ R6 = (IMC | ENICPLB);
+ R7 = R7 | R6;
+
+ CLI R6;
+ SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
+ .align 8;
+ [P0] = R7;
+ SSYNC;
+ STI R6;
+
+ ( R7:5) = [SP++];
+ RTS;
+
+/*
+ * blackfin_cache_flush_range(start, end)
+ * Invalidate all cache lines assocoiated with this
+ * area of memory.
+ *
+ * start: Start address
+ * end: End address
+ */
+ENTRY(_blackfin_icache_flush_range)
+ R2 = -L1_CACHE_BYTES;
+ R2 = R0 & R2;
+ P0 = R2;
+ P1 = R1;
+ CSYNC;
+ IFLUSH [P0];
+1:
+ IFLUSH [P0++];
+ CC = P0 < P1 (iu);
+ IF CC JUMP 1b (bp);
+ IFLUSH [P0];
+ SSYNC;
+ RTS;
+
+/*
+ * blackfin_icache_dcache_flush_range(start, end)
+ * FLUSH all cache lines assocoiated with this
+ * area of memory.
+ *
+ * start: Start address
+ * end: End address
+ */
+
+ENTRY(_blackfin_icache_dcache_flush_range)
+ R2 = -L1_CACHE_BYTES;
+ R2 = R0 & R2;
+ P0 = R2;
+ P1 = R1;
+ CSYNC;
+ IFLUSH [P0];
+1:
+ FLUSH [P0];
+ IFLUSH [P0++];
+ CC = P0 < P1 (iu);
+ IF CC JUMP 1b (bp);
+ IFLUSH [P0];
+ FLUSH [P0];
+ SSYNC;
+ RTS;
+
+/* Throw away all D-cached data in specified region without any obligation to
+ * write them back. However, we must clean the D-cached entries around the
+ * boundaries of the start and/or end address is not cache aligned.
+ *
+ * Start: start address,
+ * end : end address.
+ */
+
+ENTRY(_blackfin_dcache_invalidate_range)
+ R2 = -L1_CACHE_BYTES;
+ R2 = R0 & R2;
+ P0 = R2;
+ P1 = R1;
+ CSYNC;
+ FLUSHINV[P0];
+1:
+ FLUSHINV[P0++];
+ CC = P0 < P1 (iu);
+ IF CC JUMP 1b (bp);
+
+ /* If the data crosses a cache line, then we'll be pointing to
+ * the last cache line, but won't have flushed/invalidated it yet,
+ * so do one more.
+ */
+ FLUSHINV[P0];
+ SSYNC;
+ RTS;
+
+/* Invalidate the Entire Data cache by
+ * clearing DMC[1:0] bits
+ */
+ENTRY(_invalidate_entire_dcache)
+ENTRY(_dcache_invalidate)
+ [--SP] = ( R7:6);
+
+ P0.L = (DMEM_CONTROL & 0xFFFF);
+ P0.H = (DMEM_CONTROL >> 16);
+ R7 = [P0];
+
+ /* Clear the DMC[1:0] bits, All valid bits in the data
+ * cache are set to the invalid state
+ */
+ BITCLR(R7,DMC0_P);
+ BITCLR(R7,DMC1_P);
+ CLI R6;
+ SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
+ .align 8;
+ [P0] = R7;
+ SSYNC;
+ STI R6;
+
+ /* Configures the data cache again */
+
+ R6 = DMEM_CNTR;
+ R7 = R7 | R6;
+
+ CLI R6;
+ SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
+ .align 8;
+ [P0] = R7;
+ SSYNC;
+ STI R6;
+
+ ( R7:6) = [SP++];
+ RTS;
+
+ENTRY(_blackfin_dcache_flush_range)
+ R2 = -L1_CACHE_BYTES;
+ R2 = R0 & R2;
+ P0 = R2;
+ P1 = R1;
+ CSYNC;
+ FLUSH[P0];
+1:
+ FLUSH[P0++];
+ CC = P0 < P1 (iu);
+ IF CC JUMP 1b (bp);
+
+ /* If the data crosses a cache line, then we'll be pointing to
+ * the last cache line, but won't have flushed it yet, so do
+ * one more.
+ */
+ FLUSH[P0];
+ SSYNC;
+ RTS;
+
+ENTRY(_blackfin_dflush_page)
+ P1 = 1 << (PAGE_SHIFT - L1_CACHE_SHIFT);
+ P0 = R0;
+ CSYNC;
+ FLUSH[P0];
+ LSETUP (.Lfl1, .Lfl1) LC0 = P1;
+.Lfl1: FLUSH [P0++];
+ SSYNC;
+ RTS;
diff --git a/arch/blackfin/mach-common/cacheinit.S b/arch/blackfin/mach-common/cacheinit.S
new file mode 100644
index 000000000000..8c17f099e5eb
--- /dev/null
+++ b/arch/blackfin/mach-common/cacheinit.S
@@ -0,0 +1,137 @@
+/*
+ * File: arch/blackfin/mach-common/cacheinit.S
+ * Based on:
+ * Author: LG Soft India
+ *
+ * Created: ?
+ * Description: cache initialization
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* This function sets up the data and instruction cache. The
+ * tables like icplb table, dcplb table and Page Descriptor table
+ * are defined in cplbtab.h. You can configure those tables for
+ * your suitable requirements
+ */
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+
+.text
+
+#if defined(CONFIG_BLKFIN_CACHE)
+ENTRY(_bfin_icache_init)
+
+ /* Initialize Instruction CPLBS */
+
+ I0.L = (ICPLB_ADDR0 & 0xFFFF);
+ I0.H = (ICPLB_ADDR0 >> 16);
+
+ I1.L = (ICPLB_DATA0 & 0xFFFF);
+ I1.H = (ICPLB_DATA0 >> 16);
+
+ I2.L = _icplb_table;
+ I2.H = _icplb_table;
+
+ r1 = -1; /* end point comparison */
+ r3 = 15; /* max counter */
+
+/* read entries from table */
+
+.Lread_iaddr:
+ R0 = [I2++];
+ CC = R0 == R1;
+ IF CC JUMP .Lidone;
+ [I0++] = R0;
+
+.Lread_idata:
+ R2 = [I2++];
+ [I1++] = R2;
+ R3 = R3 + R1;
+ CC = R3 == R1;
+ IF !CC JUMP .Lread_iaddr;
+
+.Lidone:
+ /* Enable Instruction Cache */
+ P0.l = (IMEM_CONTROL & 0xFFFF);
+ P0.h = (IMEM_CONTROL >> 16);
+ R1 = [P0];
+ R0 = (IMC | ENICPLB);
+ R0 = R0 | R1;
+
+ /* Anomaly 05000125 */
+ CLI R2;
+ SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
+ .align 8;
+ [P0] = R0;
+ SSYNC;
+ STI R2;
+ RTS;
+#endif
+
+#if defined(CONFIG_BLKFIN_DCACHE)
+ENTRY(_bfin_dcache_init)
+
+ /* Initialize Data CPLBS */
+
+ I0.L = (DCPLB_ADDR0 & 0xFFFF);
+ I0.H = (DCPLB_ADDR0 >> 16);
+
+ I1.L = (DCPLB_DATA0 & 0xFFFF);
+ I1.H = (DCPLB_DATA0 >> 16);
+
+ I2.L = _dcplb_table;
+ I2.H = _dcplb_table;
+
+ R1 = -1; /* end point comparison */
+ R3 = 15; /* max counter */
+
+ /* read entries from table */
+.Lread_daddr:
+ R0 = [I2++];
+ cc = R0 == R1;
+ IF CC JUMP .Lddone;
+ [I0++] = R0;
+
+.Lread_ddata:
+ R2 = [I2++];
+ [I1++] = R2;
+ R3 = R3 + R1;
+ CC = R3 == R1;
+ IF !CC JUMP .Lread_daddr;
+.Lddone:
+ P0.L = (DMEM_CONTROL & 0xFFFF);
+ P0.H = (DMEM_CONTROL >> 16);
+ R1 = [P0];
+
+ R0 = DMEM_CNTR;
+
+ R0 = R0 | R1;
+ /* Anomaly 05000125 */
+ CLI R2;
+ SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
+ .align 8;
+ [P0] = R0;
+ SSYNC;
+ STI R2;
+ RTS;
+#endif
diff --git a/arch/blackfin/mach-common/cplbhdlr.S b/arch/blackfin/mach-common/cplbhdlr.S
new file mode 100644
index 000000000000..b979067c49ef
--- /dev/null
+++ b/arch/blackfin/mach-common/cplbhdlr.S
@@ -0,0 +1,130 @@
+/*
+ * File: arch/blackfin/mach-common/cplbhdlr.S
+ * Based on:
+ * Author: LG Soft India
+ *
+ * Created: ?
+ * Description: CPLB exception handler
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/cplb.h>
+#include <asm/entry.h>
+
+#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.type _cplb_mgr, STT_FUNC;
+.type _panic_cplb_error, STT_FUNC;
+
+.align 2
+
+.global __cplb_hdr;
+.type __cplb_hdr, STT_FUNC;
+ENTRY(__cplb_hdr)
+ R2 = SEQSTAT;
+
+ /* Mask the contents of SEQSTAT and leave only EXCAUSE in R2 */
+ R2 <<= 26;
+ R2 >>= 26;
+
+ R1 = 0x23; /* Data access CPLB protection violation */
+ CC = R2 == R1;
+ IF !CC JUMP .Lnot_data_write;
+ R0 = 2; /* is a write to data space*/
+ JUMP .Lis_icplb_miss;
+
+.Lnot_data_write:
+ R1 = 0x2C; /* CPLB miss on an instruction fetch */
+ CC = R2 == R1;
+ R0 = 0; /* is_data_miss == False*/
+ IF CC JUMP .Lis_icplb_miss;
+
+ R1 = 0x26;
+ CC = R2 == R1;
+ IF !CC JUMP .Lunknown;
+
+ R0 = 1; /* is_data_miss == True*/
+
+.Lis_icplb_miss:
+
+#if defined(CONFIG_BLKFIN_CACHE) || defined(CONFIG_BLKFIN_DCACHE)
+# if defined(CONFIG_BLKFIN_CACHE) && !defined(CONFIG_BLKFIN_DCACHE)
+ R1 = CPLB_ENABLE_ICACHE;
+# endif
+# if !defined(CONFIG_BLKFIN_CACHE) && defined(CONFIG_BLKFIN_DCACHE)
+ R1 = CPLB_ENABLE_DCACHE;
+# endif
+# if defined(CONFIG_BLKFIN_CACHE) && defined(CONFIG_BLKFIN_DCACHE)
+ R1 = CPLB_ENABLE_DCACHE | CPLB_ENABLE_ICACHE;
+# endif
+#else
+ R1 = 0;
+#endif
+
+ [--SP] = RETS;
+ CALL _cplb_mgr;
+ RETS = [SP++];
+ CC = R0 == 0;
+ IF !CC JUMP .Lnot_replaced;
+ RTS;
+
+/*
+ * Diagnostic exception handlers
+ */
+.Lunknown:
+ R0 = CPLB_UNKNOWN_ERR;
+ JUMP .Lcplb_error;
+
+.Lnot_replaced:
+ CC = R0 == CPLB_NO_UNLOCKED;
+ IF !CC JUMP .Lnext_check;
+ R0 = CPLB_NO_UNLOCKED;
+ JUMP .Lcplb_error;
+
+.Lnext_check:
+ CC = R0 == CPLB_NO_ADDR_MATCH;
+ IF !CC JUMP .Lnext_check2;
+ R0 = CPLB_NO_ADDR_MATCH;
+ JUMP .Lcplb_error;
+
+.Lnext_check2:
+ CC = R0 == CPLB_PROT_VIOL;
+ IF !CC JUMP .Lstrange_return_from_cplb_mgr;
+ R0 = CPLB_PROT_VIOL;
+ JUMP .Lcplb_error;
+
+.Lstrange_return_from_cplb_mgr:
+ IDLE;
+ CSYNC;
+ JUMP .Lstrange_return_from_cplb_mgr;
+
+.Lcplb_error:
+ R1 = sp;
+ SP += -12;
+ call _panic_cplb_error;
+ SP += 12;
+ JUMP _handle_bad_cplb;
diff --git a/arch/blackfin/mach-common/cplbinfo.c b/arch/blackfin/mach-common/cplbinfo.c
new file mode 100644
index 000000000000..d65fac39d1bf
--- /dev/null
+++ b/arch/blackfin/mach-common/cplbinfo.c
@@ -0,0 +1,211 @@
+/*
+ * File: arch/blackfin/mach-common/cplbinfo.c
+ * Based on:
+ * Author: Sonic Zhang <sonic.zhang@analog.com>
+ *
+ * Created: Jan. 2005
+ * Description: Display CPLB status
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+
+#include <asm/current.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+
+#include <asm/cplb.h>
+#include <asm/blackfin.h>
+
+#define CPLB_I 1
+#define CPLB_D 2
+
+#define SYNC_SYS SSYNC()
+#define SYNC_CORE CSYNC()
+
+#define CPLB_BIT_PAGESIZE 0x30000
+
+static int page_size_table[4] = {
+ 0x00000400, /* 1K */
+ 0x00001000, /* 4K */
+ 0x00100000, /* 1M */
+ 0x00400000 /* 4M */
+};
+
+static char page_size_string_table[][4] = { "1K", "4K", "1M", "4M" };
+
+static int cplb_find_entry(unsigned long *cplb_addr,
+ unsigned long *cplb_data, unsigned long addr,
+ unsigned long data)
+{
+ int ii;
+
+ for (ii = 0; ii < 16; ii++)
+ if (addr >= cplb_addr[ii] && addr < cplb_addr[ii] +
+ page_size_table[(cplb_data[ii] & CPLB_BIT_PAGESIZE) >> 16]
+ && (cplb_data[ii] == data))
+ return ii;
+
+ return -1;
+}
+
+static char *cplb_print_entry(char *buf, int type)
+{
+ unsigned long *p_addr = dpdt_table;
+ unsigned long *p_data = dpdt_table + 1;
+ unsigned long *p_icount = dpdt_swapcount_table;
+ unsigned long *p_ocount = dpdt_swapcount_table + 1;
+ unsigned long *cplb_addr = (unsigned long *)DCPLB_ADDR0;
+ unsigned long *cplb_data = (unsigned long *)DCPLB_DATA0;
+ int entry = 0, used_cplb = 0;
+
+ if (type == CPLB_I) {
+ buf += sprintf(buf, "Instrction CPLB entry:\n");
+ p_addr = ipdt_table;
+ p_data = ipdt_table + 1;
+ p_icount = ipdt_swapcount_table;
+ p_ocount = ipdt_swapcount_table + 1;
+ cplb_addr = (unsigned long *)ICPLB_ADDR0;
+ cplb_data = (unsigned long *)ICPLB_DATA0;
+ } else
+ buf += sprintf(buf, "Data CPLB entry:\n");
+
+ buf += sprintf(buf, "Address\t\tData\tSize\tValid\tLocked\tSwapin\
+\tiCount\toCount\n");
+
+ while (*p_addr != 0xffffffff) {
+ entry = cplb_find_entry(cplb_addr, cplb_data, *p_addr, *p_data);
+ if (entry >= 0)
+ used_cplb |= 1 << entry;
+
+ buf +=
+ sprintf(buf,
+ "0x%08lx\t0x%05lx\t%s\t%c\t%c\t%2d\t%ld\t%ld\n",
+ *p_addr, *p_data,
+ page_size_string_table[(*p_data & 0x30000) >> 16],
+ (*p_data & CPLB_VALID) ? 'Y' : 'N',
+ (*p_data & CPLB_LOCK) ? 'Y' : 'N', entry, *p_icount,
+ *p_ocount);
+
+ p_addr += 2;
+ p_data += 2;
+ p_icount += 2;
+ p_ocount += 2;
+ }
+
+ if (used_cplb != 0xffff) {
+ buf += sprintf(buf, "Unused/mismatched CPLBs:\n");
+
+ for (entry = 0; entry < 16; entry++)
+ if (0 == ((1 << entry) & used_cplb)) {
+ int flags = cplb_data[entry];
+ buf +=
+ sprintf(buf,
+ "%2d: 0x%08lx\t0x%05x\t%s\t%c\t%c\n",
+ entry, cplb_addr[entry], flags,
+ page_size_string_table[(flags &
+ 0x30000) >>
+ 16],
+ (flags & CPLB_VALID) ? 'Y' : 'N',
+ (flags & CPLB_LOCK) ? 'Y' : 'N');
+ }
+ }
+
+ buf += sprintf(buf, "\n");
+
+ return buf;
+}
+
+static int cplbinfo_proc_output(char *buf)
+{
+ char *p;
+
+ p = buf;
+
+ p += sprintf(p,
+ "------------------ CPLB Information ------------------\n\n");
+
+ if (bfin_read_IMEM_CONTROL() & ENICPLB)
+ p = cplb_print_entry(p, CPLB_I);
+ else
+ p += sprintf(p, "Instruction CPLB is disabled.\n\n");
+
+ if (bfin_read_DMEM_CONTROL() & ENDCPLB)
+ p = cplb_print_entry(p, CPLB_D);
+ else
+ p += sprintf(p, "Data CPLB is disabled.\n");
+
+ return p - buf;
+}
+
+static int cplbinfo_read_proc(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ int len;
+
+ len = cplbinfo_proc_output(page);
+ if (len <= off + count)
+ *eof = 1;
+ *start = page + off;
+ len -= off;
+ if (len > count)
+ len = count;
+ if (len < 0)
+ len = 0;
+ return len;
+}
+
+static int cplbinfo_write_proc(struct file *file, const char __user *buffer,
+ unsigned long count, void *data)
+{
+ printk(KERN_INFO "Reset the CPLB swap in/out counts.\n");
+ memset(ipdt_swapcount_table, 0, MAX_SWITCH_I_CPLBS * sizeof(unsigned long));
+ memset(dpdt_swapcount_table, 0, MAX_SWITCH_D_CPLBS * sizeof(unsigned long));
+
+ return count;
+}
+
+static int __init cplbinfo_init(void)
+{
+ struct proc_dir_entry *entry;
+
+ if ((entry = create_proc_entry("cplbinfo", 0, NULL)) == NULL) {
+ return -ENOMEM;
+ }
+
+ entry->read_proc = cplbinfo_read_proc;
+ entry->write_proc = cplbinfo_write_proc;
+ entry->data = NULL;
+
+ return 0;
+}
+
+static void __exit cplbinfo_exit(void)
+{
+ remove_proc_entry("cplbinfo", NULL);
+}
+
+module_init(cplbinfo_init);
+module_exit(cplbinfo_exit);
diff --git a/arch/blackfin/mach-common/cplbmgr.S b/arch/blackfin/mach-common/cplbmgr.S
new file mode 100644
index 000000000000..f5efc4bc65e6
--- /dev/null
+++ b/arch/blackfin/mach-common/cplbmgr.S
@@ -0,0 +1,607 @@
+/*
+ * File: arch/blackfin/mach-common/cplbmgtr.S
+ * Based on:
+ * Author: LG Soft India
+ *
+ * Created: ?
+ * Description: CPLB replacement routine for CPLB mismatch
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* Usage: int _cplb_mgr(is_data_miss,int enable_cache)
+ * is_data_miss==2 => Mark as Dirty, write to the clean data page
+ * is_data_miss==1 => Replace a data CPLB.
+ * is_data_miss==0 => Replace an instruction CPLB.
+ *
+ * Returns:
+ * CPLB_RELOADED => Successfully updated CPLB table.
+ * CPLB_NO_UNLOCKED => All CPLBs are locked, so cannot be evicted.
+ * This indicates that the CPLBs in the configuration
+ * tablei are badly configured, as this should never
+ * occur.
+ * CPLB_NO_ADDR_MATCH => The address being accessed, that triggered the
+ * exception, is not covered by any of the CPLBs in
+ * the configuration table. The application is
+ * presumably misbehaving.
+ * CPLB_PROT_VIOL => The address being accessed, that triggered the
+ * exception, was not a first-write to a clean Write
+ * Back Data page, and so presumably is a genuine
+ * violation of the page's protection attributes.
+ * The application is misbehaving.
+ */
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+#include <asm/cplb.h>
+
+#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 2;
+ENTRY(_cplb_mgr)
+
+ [--SP]=( R7:4,P5:3 );
+
+ CC = R0 == 2;
+ IF CC JUMP .Ldcplb_write;
+
+ CC = R0 == 0;
+ IF !CC JUMP .Ldcplb_miss_compare;
+
+ /* ICPLB Miss Exception. We need to choose one of the
+ * currently-installed CPLBs, and replace it with one
+ * from the configuration table.
+ */
+
+ P4.L = (ICPLB_FAULT_ADDR & 0xFFFF);
+ P4.H = (ICPLB_FAULT_ADDR >> 16);
+
+ P1 = 16;
+ P5.L = _page_size_table;
+ P5.H = _page_size_table;
+
+ P0.L = (ICPLB_DATA0 & 0xFFFF);
+ P0.H = (ICPLB_DATA0 >> 16);
+ R4 = [P4]; /* Get faulting address*/
+ R6 = 64; /* Advance past the fault address, which*/
+ R6 = R6 + R4; /* we'll use if we find a match*/
+ R3 = ((16 << 8) | 2); /* Extract mask, bits 16 and 17.*/
+
+ R5 = 0;
+.Lisearch:
+
+ R1 = [P0-0x100]; /* Address for this CPLB */
+
+ R0 = [P0++]; /* Info for this CPLB*/
+ CC = BITTST(R0,0); /* Is the CPLB valid?*/
+ IF !CC JUMP .Lnomatch; /* Skip it, if not.*/
+ CC = R4 < R1(IU); /* If fault address less than page start*/
+ IF CC JUMP .Lnomatch; /* then skip this one.*/
+ R2 = EXTRACT(R0,R3.L) (Z); /* Get page size*/
+ P1 = R2;
+ P1 = P5 + (P1<<2); /* index into page-size table*/
+ R2 = [P1]; /* Get the page size*/
+ R1 = R1 + R2; /* and add to page start, to get page end*/
+ CC = R4 < R1(IU); /* and see whether fault addr is in page.*/
+ IF !CC R4 = R6; /* If so, advance the address and finish loop.*/
+ IF !CC JUMP .Lisearch_done;
+.Lnomatch:
+ /* Go around again*/
+ R5 += 1;
+ CC = BITTST(R5, 4); /* i.e CC = R5 >= 16*/
+ IF !CC JUMP .Lisearch;
+
+.Lisearch_done:
+ I0 = R4; /* Fault address we'll search for*/
+
+ /* set up pointers */
+ P0.L = (ICPLB_DATA0 & 0xFFFF);
+ P0.H = (ICPLB_DATA0 >> 16);
+
+ /* The replacement procedure for ICPLBs */
+
+ P4.L = (IMEM_CONTROL & 0xFFFF);
+ P4.H = (IMEM_CONTROL >> 16);
+
+ /* disable cplbs */
+ R5 = [P4]; /* Control Register*/
+ BITCLR(R5,ENICPLB_P);
+ CLI R1;
+ SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
+ .align 8;
+ [P4] = R5;
+ SSYNC;
+ STI R1;
+
+ R1 = -1; /* end point comparison */
+ R3 = 16; /* counter */
+
+ /* Search through CPLBs for first non-locked entry */
+ /* Overwrite it by moving everyone else up by 1 */
+.Licheck_lock:
+ R0 = [P0++];
+ R3 = R3 + R1;
+ CC = R3 == R1;
+ IF CC JUMP .Lall_locked;
+ CC = BITTST(R0, 0); /* an invalid entry is good */
+ IF !CC JUMP .Lifound_victim;
+ CC = BITTST(R0,1); /* but a locked entry isn't */
+ IF CC JUMP .Licheck_lock;
+
+.Lifound_victim:
+#ifdef CONFIG_CPLB_INFO
+ R7 = [P0 - 0x104];
+ P2.L = _ipdt_table;
+ P2.H = _ipdt_table;
+ P3.L = _ipdt_swapcount_table;
+ P3.H = _ipdt_swapcount_table;
+ P3 += -4;
+.Licount:
+ R2 = [P2]; /* address from config table */
+ P2 += 8;
+ P3 += 8;
+ CC = R2==-1;
+ IF CC JUMP .Licount_done;
+ CC = R7==R2;
+ IF !CC JUMP .Licount;
+ R7 = [P3];
+ R7 += 1;
+ [P3] = R7;
+ CSYNC;
+.Licount_done:
+#endif
+ LC0=R3;
+ LSETUP(.Lis_move,.Lie_move) LC0;
+.Lis_move:
+ R0 = [P0];
+ [P0 - 4] = R0;
+ R0 = [P0 - 0x100];
+ [P0-0x104] = R0;
+.Lie_move:P0+=4;
+
+ /* We've made space in the ICPLB table, so that ICPLB15
+ * is now free to be overwritten. Next, we have to determine
+ * which CPLB we need to install, from the configuration
+ * table. This is a matter of getting the start-of-page
+ * addresses and page-lengths from the config table, and
+ * determining whether the fault address falls within that
+ * range.
+ */
+
+ P2.L = _ipdt_table;
+ P2.H = _ipdt_table;
+#ifdef CONFIG_CPLB_INFO
+ P3.L = _ipdt_swapcount_table;
+ P3.H = _ipdt_swapcount_table;
+ P3 += -8;
+#endif
+ P0.L = _page_size_table;
+ P0.H = _page_size_table;
+
+ /* Retrieve our fault address (which may have been advanced
+ * because the faulting instruction crossed a page boundary).
+ */
+
+ R0 = I0;
+
+ /* An extraction pattern, to get the page-size bits from
+ * the CPLB data entry. Bits 16-17, so two bits at posn 16.
+ */
+
+ R1 = ((16<<8)|2);
+.Linext: R4 = [P2++]; /* address from config table */
+ R2 = [P2++]; /* data from config table */
+#ifdef CONFIG_CPLB_INFO
+ P3 += 8;
+#endif
+
+ CC = R4 == -1; /* End of config table*/
+ IF CC JUMP .Lno_page_in_table;
+
+ /* See if failed address > start address */
+ CC = R4 <= R0(IU);
+ IF !CC JUMP .Linext;
+
+ /* extract page size (17:16)*/
+ R3 = EXTRACT(R2, R1.L) (Z);
+
+ /* add page size to addr to get range */
+
+ P5 = R3;
+ P5 = P0 + (P5 << 2); /* scaled, for int access*/
+ R3 = [P5];
+ R3 = R3 + R4;
+
+ /* See if failed address < (start address + page size) */
+ CC = R0 < R3(IU);
+ IF !CC JUMP .Linext;
+
+ /* We've found a CPLB in the config table that covers
+ * the faulting address, so install this CPLB into the
+ * last entry of the table.
+ */
+
+ P1.L = (ICPLB_DATA15 & 0xFFFF); /* ICPLB_DATA15 */
+ P1.H = (ICPLB_DATA15 >> 16);
+ [P1] = R2;
+ [P1-0x100] = R4;
+#ifdef CONFIG_CPLB_INFO
+ R3 = [P3];
+ R3 += 1;
+ [P3] = R3;
+#endif
+
+ /* P4 points to IMEM_CONTROL, and R5 contains its old
+ * value, after we disabled ICPLBS. Re-enable them.
+ */
+
+ BITSET(R5,ENICPLB_P);
+ CLI R2;
+ SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
+ .align 8;
+ [P4] = R5;
+ SSYNC;
+ STI R2;
+
+ ( R7:4,P5:3 ) = [SP++];
+ R0 = CPLB_RELOADED;
+ RTS;
+
+/* FAILED CASES*/
+.Lno_page_in_table:
+ ( R7:4,P5:3 ) = [SP++];
+ R0 = CPLB_NO_ADDR_MATCH;
+ RTS;
+.Lall_locked:
+ ( R7:4,P5:3 ) = [SP++];
+ R0 = CPLB_NO_UNLOCKED;
+ RTS;
+.Lprot_violation:
+ ( R7:4,P5:3 ) = [SP++];
+ R0 = CPLB_PROT_VIOL;
+ RTS;
+
+.Ldcplb_write:
+
+ /* if a DCPLB is marked as write-back (CPLB_WT==0), and
+ * it is clean (CPLB_DIRTY==0), then a write to the
+ * CPLB's page triggers a protection violation. We have to
+ * mark the CPLB as dirty, to indicate that there are
+ * pending writes associated with the CPLB.
+ */
+
+ P4.L = (DCPLB_STATUS & 0xFFFF);
+ P4.H = (DCPLB_STATUS >> 16);
+ P3.L = (DCPLB_DATA0 & 0xFFFF);
+ P3.H = (DCPLB_DATA0 >> 16);
+ R5 = [P4];
+
+ /* A protection violation can be caused by more than just writes
+ * to a clean WB page, so we have to ensure that:
+ * - It's a write
+ * - to a clean WB page
+ * - and is allowed in the mode the access occurred.
+ */
+
+ CC = BITTST(R5, 16); /* ensure it was a write*/
+ IF !CC JUMP .Lprot_violation;
+
+ /* to check the rest, we have to retrieve the DCPLB.*/
+
+ /* The low half of DCPLB_STATUS is a bit mask*/
+
+ R2 = R5.L (Z); /* indicating which CPLB triggered the event.*/
+ R3 = 30; /* so we can use this to determine the offset*/
+ R2.L = SIGNBITS R2;
+ R2 = R2.L (Z); /* into the DCPLB table.*/
+ R3 = R3 - R2;
+ P4 = R3;
+ P3 = P3 + (P4<<2);
+ R3 = [P3]; /* Retrieve the CPLB*/
+
+ /* Now we can check whether it's a clean WB page*/
+
+ CC = BITTST(R3, 14); /* 0==WB, 1==WT*/
+ IF CC JUMP .Lprot_violation;
+ CC = BITTST(R3, 7); /* 0 == clean, 1 == dirty*/
+ IF CC JUMP .Lprot_violation;
+
+ /* Check whether the write is allowed in the mode that was active.*/
+
+ R2 = 1<<3; /* checking write in user mode*/
+ CC = BITTST(R5, 17); /* 0==was user, 1==was super*/
+ R5 = CC;
+ R2 <<= R5; /* if was super, check write in super mode*/
+ R2 = R3 & R2;
+ CC = R2 == 0;
+ IF CC JUMP .Lprot_violation;
+
+ /* It's a genuine write-to-clean-page.*/
+
+ BITSET(R3, 7); /* mark as dirty*/
+ [P3] = R3; /* and write back.*/
+ NOP;
+ CSYNC;
+ ( R7:4,P5:3 ) = [SP++];
+ R0 = CPLB_RELOADED;
+ RTS;
+
+.Ldcplb_miss_compare:
+
+ /* Data CPLB Miss event. We need to choose a CPLB to
+ * evict, and then locate a new CPLB to install from the
+ * config table, that covers the faulting address.
+ */
+
+ P1.L = (DCPLB_DATA15 & 0xFFFF);
+ P1.H = (DCPLB_DATA15 >> 16);
+
+ P4.L = (DCPLB_FAULT_ADDR & 0xFFFF);
+ P4.H = (DCPLB_FAULT_ADDR >> 16);
+ R4 = [P4];
+ I0 = R4;
+
+ /* The replacement procedure for DCPLBs*/
+
+ R6 = R1; /* Save for later*/
+
+ /* Turn off CPLBs while we work.*/
+ P4.L = (DMEM_CONTROL & 0xFFFF);
+ P4.H = (DMEM_CONTROL >> 16);
+ R5 = [P4];
+ BITCLR(R5,ENDCPLB_P);
+ CLI R0;
+ SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
+ .align 8;
+ [P4] = R5;
+ SSYNC;
+ STI R0;
+
+ /* Start looking for a CPLB to evict. Our order of preference
+ * is: invalid CPLBs, clean CPLBs, dirty CPLBs. Locked CPLBs
+ * are no good.
+ */
+
+ I1.L = (DCPLB_DATA0 & 0xFFFF);
+ I1.H = (DCPLB_DATA0 >> 16);
+ P1 = 2;
+ P2 = 16;
+ I2.L = _dcplb_preference;
+ I2.H = _dcplb_preference;
+ LSETUP(.Lsdsearch1, .Ledsearch1) LC0 = P1;
+.Lsdsearch1:
+ R0 = [I2++]; /* Get the bits we're interested in*/
+ P0 = I1; /* Go back to start of table*/
+ LSETUP (.Lsdsearch2, .Ledsearch2) LC1 = P2;
+.Lsdsearch2:
+ R1 = [P0++]; /* Fetch each installed CPLB in turn*/
+ R2 = R1 & R0; /* and test for interesting bits.*/
+ CC = R2 == 0; /* If none are set, it'll do.*/
+ IF !CC JUMP .Lskip_stack_check;
+
+ R2 = [P0 - 0x104]; /* R2 - PageStart */
+ P3.L = _page_size_table; /* retrieve end address */
+ P3.H = _page_size_table; /* retrieve end address */
+ R3 = 0x1002; /* 16th - position, 2 bits -length */
+#ifdef ANOMALY_05000209
+ nop; /* Anomaly 05000209 */
+#endif
+ R7 = EXTRACT(R1,R3.l);
+ R7 = R7 << 2; /* Page size index offset */
+ P5 = R7;
+ P3 = P3 + P5;
+ R7 = [P3]; /* page size in bytes */
+
+ R7 = R2 + R7; /* R7 - PageEnd */
+ R4 = SP; /* Test SP is in range */
+
+ CC = R7 < R4; /* if PageEnd < SP */
+ IF CC JUMP .Ldfound_victim;
+ R3 = 0x284; /* stack length from start of trap till
+ * the point.
+ * 20 stack locations for future modifications
+ */
+ R4 = R4 + R3;
+ CC = R4 < R2; /* if SP + stacklen < PageStart */
+ IF CC JUMP .Ldfound_victim;
+.Lskip_stack_check:
+
+.Ledsearch2: NOP;
+.Ledsearch1: NOP;
+
+ /* If we got here, we didn't find a DCPLB we considered
+ * replacable, which means all of them were locked.
+ */
+
+ JUMP .Lall_locked;
+.Ldfound_victim:
+
+#ifdef CONFIG_CPLB_INFO
+ R7 = [P0 - 0x104];
+ P2.L = _dpdt_table;
+ P2.H = _dpdt_table;
+ P3.L = _dpdt_swapcount_table;
+ P3.H = _dpdt_swapcount_table;
+ P3 += -4;
+.Ldicount:
+ R2 = [P2];
+ P2 += 8;
+ P3 += 8;
+ CC = R2==-1;
+ IF CC JUMP .Ldicount_done;
+ CC = R7==R2;
+ IF !CC JUMP .Ldicount;
+ R7 = [P3];
+ R7 += 1;
+ [P3] = R7;
+.Ldicount_done:
+#endif
+
+ /* Clean down the hardware loops*/
+ R2 = 0;
+ LC1 = R2;
+ LC0 = R2;
+
+ /* There's a suitable victim in [P0-4] (because we've
+ * advanced already).
+ */
+
+.LDdoverwrite:
+
+ /* [P0-4] is a suitable victim CPLB, so we want to
+ * overwrite it by moving all the following CPLBs
+ * one space closer to the start.
+ */
+
+ R1.L = (DCPLB_DATA16 & 0xFFFF); /* DCPLB_DATA15 + 4 */
+ R1.H = (DCPLB_DATA16 >> 16);
+ R0 = P0;
+
+ /* If the victim happens to be in DCPLB15,
+ * we don't need to move anything.
+ */
+
+ CC = R1 == R0;
+ IF CC JUMP .Lde_moved;
+ R1 = R1 - R0;
+ R1 >>= 2;
+ P1 = R1;
+ LSETUP(.Lds_move, .Lde_move) LC0=P1;
+.Lds_move:
+ R0 = [P0++]; /* move data */
+ [P0 - 8] = R0;
+ R0 = [P0-0x104] /* move address */
+.Lde_move: [P0-0x108] = R0;
+
+ /* We've now made space in DCPLB15 for the new CPLB to be
+ * installed. The next stage is to locate a CPLB in the
+ * config table that covers the faulting address.
+ */
+
+.Lde_moved:NOP;
+ R0 = I0; /* Our faulting address */
+
+ P2.L = _dpdt_table;
+ P2.H = _dpdt_table;
+#ifdef CONFIG_CPLB_INFO
+ P3.L = _dpdt_swapcount_table;
+ P3.H = _dpdt_swapcount_table;
+ P3 += -8;
+#endif
+
+ P1.L = _page_size_table;
+ P1.H = _page_size_table;
+
+ /* An extraction pattern, to retrieve bits 17:16.*/
+
+ R1 = (16<<8)|2;
+.Ldnext: R4 = [P2++]; /* address */
+ R2 = [P2++]; /* data */
+#ifdef CONFIG_CPLB_INFO
+ P3 += 8;
+#endif
+
+ CC = R4 == -1;
+ IF CC JUMP .Lno_page_in_table;
+
+ /* See if failed address > start address */
+ CC = R4 <= R0(IU);
+ IF !CC JUMP .Ldnext;
+
+ /* extract page size (17:16)*/
+ R3 = EXTRACT(R2, R1.L) (Z);
+
+ /* add page size to addr to get range */
+
+ P5 = R3;
+ P5 = P1 + (P5 << 2);
+ R3 = [P5];
+ R3 = R3 + R4;
+
+ /* See if failed address < (start address + page size) */
+ CC = R0 < R3(IU);
+ IF !CC JUMP .Ldnext;
+
+ /* We've found the CPLB that should be installed, so
+ * write it into CPLB15, masking off any caching bits
+ * if necessary.
+ */
+
+ P1.L = (DCPLB_DATA15 & 0xFFFF);
+ P1.H = (DCPLB_DATA15 >> 16);
+
+ /* If the DCPLB has cache bits set, but caching hasn't
+ * been enabled, then we want to mask off the cache-in-L1
+ * bit before installing. Moreover, if caching is off, we
+ * also want to ensure that the DCPLB has WT mode set, rather
+ * than WB, since WB pages still trigger first-write exceptions
+ * even when not caching is off, and the page isn't marked as
+ * cachable. Finally, we could mark the page as clean, not dirty,
+ * but we choose to leave that decision to the user; if the user
+ * chooses to have a CPLB pre-defined as dirty, then they always
+ * pay the cost of flushing during eviction, but don't pay the
+ * cost of first-write exceptions to mark the page as dirty.
+ */
+
+#ifdef CONFIG_BLKFIN_WT
+ BITSET(R6, 14); /* Set WT*/
+#endif
+
+ [P1] = R2;
+ [P1-0x100] = R4;
+#ifdef CONFIG_CPLB_INFO
+ R3 = [P3];
+ R3 += 1;
+ [P3] = R3;
+#endif
+
+ /* We've installed the CPLB, so re-enable CPLBs. P4
+ * points to DMEM_CONTROL, and R5 is the value we
+ * last wrote to it, when we were disabling CPLBs.
+ */
+
+ BITSET(R5,ENDCPLB_P);
+ CLI R2;
+ .align 8;
+ [P4] = R5;
+ SSYNC;
+ STI R2;
+
+ ( R7:4,P5:3 ) = [SP++];
+ R0 = CPLB_RELOADED;
+ RTS;
+
+.data
+.align 4;
+_page_size_table:
+.byte4 0x00000400; /* 1K */
+.byte4 0x00001000; /* 4K */
+.byte4 0x00100000; /* 1M */
+.byte4 0x00400000; /* 4M */
+
+.align 4;
+_dcplb_preference:
+.byte4 0x00000001; /* valid bit */
+.byte4 0x00000002; /* lock bit */
diff --git a/arch/blackfin/mach-common/dpmc.S b/arch/blackfin/mach-common/dpmc.S
new file mode 100644
index 000000000000..97cdcd6a00d4
--- /dev/null
+++ b/arch/blackfin/mach-common/dpmc.S
@@ -0,0 +1,418 @@
+/*
+ * File: arch/blackfin/mach-common/dpmc.S
+ * Based on:
+ * Author: LG Soft India
+ *
+ * Created: ?
+ * Description: Watchdog Timer APIs
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+#include <asm/mach/irq.h>
+
+.text
+
+ENTRY(_unmask_wdog_wakeup_evt)
+ [--SP] = ( R7:0, P5:0 );
+#if defined(CONFIG_BF561)
+ P0.H = hi(SICA_IWR1);
+ P0.L = lo(SICA_IWR1);
+#else
+ P0.h = (SIC_IWR >> 16);
+ P0.l = (SIC_IWR & 0xFFFF);
+#endif
+ R7 = [P0];
+#if defined(CONFIG_BF561)
+ BITSET(R7, 27);
+#else
+ BITSET(R7,(IRQ_WATCH - IVG7));
+#endif
+ [P0] = R7;
+ SSYNC;
+
+ ( R7:0, P5:0 ) = [SP++];
+ RTS;
+
+.LWRITE_TO_STAT:
+ /* When watch dog timer is enabled, a write to STAT will load the
+ * contents of CNT to STAT
+ */
+ R7 = 0x0000(z);
+#if defined(CONFIG_BF561)
+ P0.h = (WDOGA_STAT >> 16);
+ P0.l = (WDOGA_STAT & 0xFFFF);
+#else
+ P0.h = (WDOG_STAT >> 16);
+ P0.l = (WDOG_STAT & 0xFFFF);
+#endif
+ [P0] = R7;
+ SSYNC;
+ JUMP .LSKIP_WRITE_TO_STAT;
+
+ENTRY(_program_wdog_timer)
+ [--SP] = ( R7:0, P5:0 );
+#if defined(CONFIG_BF561)
+ P0.h = (WDOGA_CNT >> 16);
+ P0.l = (WDOGA_CNT & 0xFFFF);
+#else
+ P0.h = (WDOG_CNT >> 16);
+ P0.l = (WDOG_CNT & 0xFFFF);
+#endif
+ [P0] = R0;
+ SSYNC;
+
+#if defined(CONFIG_BF561)
+ P0.h = (WDOGA_CTL >> 16);
+ P0.l = (WDOGA_CTL & 0xFFFF);
+#else
+ P0.h = (WDOG_CTL >> 16);
+ P0.l = (WDOG_CTL & 0xFFFF);
+#endif
+ R7 = W[P0](Z);
+ CC = BITTST(R7,1);
+ if !CC JUMP .LWRITE_TO_STAT;
+ CC = BITTST(R7,2);
+ if !CC JUMP .LWRITE_TO_STAT;
+
+.LSKIP_WRITE_TO_STAT:
+#if defined(CONFIG_BF561)
+ P0.h = (WDOGA_CTL >> 16);
+ P0.l = (WDOGA_CTL & 0xFFFF);
+#else
+ P0.h = (WDOG_CTL >> 16);
+ P0.l = (WDOG_CTL & 0xFFFF);
+#endif
+ R7 = W[P0](Z);
+ BITCLR(R7,1); /* Enable GP event */
+ BITSET(R7,2);
+ W[P0] = R7.L;
+ SSYNC;
+ NOP;
+
+ R7 = W[P0](Z);
+ BITCLR(R7,4); /* Enable the wdog counter */
+ W[P0] = R7.L;
+ SSYNC;
+
+ ( R7:0, P5:0 ) = [SP++];
+ RTS;
+
+ENTRY(_clear_wdog_wakeup_evt)
+ [--SP] = ( R7:0, P5:0 );
+
+#if defined(CONFIG_BF561)
+ P0.h = (WDOGA_CTL >> 16);
+ P0.l = (WDOGA_CTL & 0xFFFF);
+#else
+ P0.h = (WDOG_CTL >> 16);
+ P0.l = (WDOG_CTL & 0xFFFF);
+#endif
+ R7 = 0x0AD6(Z);
+ W[P0] = R7.L;
+ SSYNC;
+
+ R7 = W[P0](Z);
+ BITSET(R7,15);
+ W[P0] = R7.L;
+ SSYNC;
+
+ R7 = W[P0](Z);
+ BITSET(R7,1);
+ BITSET(R7,2);
+ W[P0] = R7.L;
+ SSYNC;
+
+ ( R7:0, P5:0 ) = [SP++];
+ RTS;
+
+ENTRY(_disable_wdog_timer)
+ [--SP] = ( R7:0, P5:0 );
+#if defined(CONFIG_BF561)
+ P0.h = (WDOGA_CTL >> 16);
+ P0.l = (WDOGA_CTL & 0xFFFF);
+#else
+ P0.h = (WDOG_CTL >> 16);
+ P0.l = (WDOG_CTL & 0xFFFF);
+#endif
+ R7 = 0xAD6(Z);
+ W[P0] = R7.L;
+ SSYNC;
+ ( R7:0, P5:0 ) = [SP++];
+ RTS;
+
+#if !defined(CONFIG_BF561)
+
+.section .l1.text
+
+ENTRY(_sleep_mode)
+ [--SP] = ( R7:0, P5:0 );
+ [--SP] = RETS;
+
+ call _set_sic_iwr;
+
+ R0 = 0xFFFF (Z);
+ call _set_rtc_istat
+
+ P0.H = hi(PLL_CTL);
+ P0.L = lo(PLL_CTL);
+ R1 = W[P0](z);
+ BITSET (R1, 3);
+ W[P0] = R1.L;
+
+ CLI R2;
+ SSYNC;
+ IDLE;
+ STI R2;
+
+ call _test_pll_locked;
+
+ R0 = IWR_ENABLE(0);
+ call _set_sic_iwr;
+
+ P0.H = hi(PLL_CTL);
+ P0.L = lo(PLL_CTL);
+ R7 = w[p0](z);
+ BITCLR (R7, 3);
+ BITCLR (R7, 5);
+ w[p0] = R7.L;
+ IDLE;
+ call _test_pll_locked;
+
+ RETS = [SP++];
+ ( R7:0, P5:0 ) = [SP++];
+ RTS;
+
+ENTRY(_hibernate_mode)
+ [--SP] = ( R7:0, P5:0 );
+ [--SP] = RETS;
+
+ call _set_sic_iwr;
+
+ R0 = 0xFFFF (Z);
+ call _set_rtc_istat
+
+ P0.H = hi(VR_CTL);
+ P0.L = lo(VR_CTL);
+ R1 = W[P0](z);
+ BITSET (R1, 8);
+ BITCLR (R1, 0);
+ BITCLR (R1, 1);
+ W[P0] = R1.L;
+ SSYNC;
+
+ CLI R2;
+ IDLE;
+
+ /* Actually, adding anything may not be necessary...SDRAM contents
+ * are lost
+ */
+
+ENTRY(_deep_sleep)
+ [--SP] = ( R7:0, P5:0 );
+ [--SP] = RETS;
+
+ CLI R4;
+
+ call _set_sic_iwr;
+
+ call _set_sdram_srfs;
+
+ /* Clear all the interrupts,bits sticky */
+ R0 = 0xFFFF (Z);
+ call _set_rtc_istat
+
+ P0.H = hi(PLL_CTL);
+ P0.L = lo(PLL_CTL);
+ R0 = W[P0](z);
+ BITSET (R0, 5);
+ W[P0] = R0.L;
+
+ call _test_pll_locked;
+
+ SSYNC;
+ IDLE;
+
+ call _unset_sdram_srfs;
+
+ call _test_pll_locked;
+
+ R0 = IWR_ENABLE(0);
+ call _set_sic_iwr;
+
+ P0.H = hi(PLL_CTL);
+ P0.L = lo(PLL_CTL);
+ R0 = w[p0](z);
+ BITCLR (R0, 3);
+ BITCLR (R0, 5);
+ BITCLR (R0, 8);
+ w[p0] = R0;
+ IDLE;
+ call _test_pll_locked;
+
+ STI R4;
+
+ RETS = [SP++];
+ ( R7:0, P5:0 ) = [SP++];
+ RTS;
+
+ENTRY(_sleep_deeper)
+ [--SP] = ( R7:0, P5:0 );
+ [--SP] = RETS;
+
+ CLI R4;
+
+ P3 = R0;
+ R0 = IWR_ENABLE(0);
+ call _set_sic_iwr;
+ call _set_sdram_srfs;
+
+ /* Clear all the interrupts,bits sticky */
+ R0 = 0xFFFF (Z);
+ call _set_rtc_istat
+
+ P0.H = hi(PLL_DIV);
+ P0.L = lo(PLL_DIV);
+ R6 = W[P0](z);
+ R0.L = 0xF;
+ W[P0] = R0.l;
+
+ P0.H = hi(PLL_CTL);
+ P0.L = lo(PLL_CTL);
+ R5 = W[P0](z);
+ R0.L = (MIN_VC/CONFIG_CLKIN_HZ) << 9;
+ W[P0] = R0.l;
+
+ SSYNC;
+ IDLE;
+
+ call _test_pll_locked;
+
+ P0.H = hi(VR_CTL);
+ P0.L = lo(VR_CTL);
+ R7 = W[P0](z);
+ R1 = 0x6;
+ R1 <<= 16;
+ R2 = 0x0404(Z);
+ R1 = R1|R2;
+
+ R2 = DEPOSIT(R7, R1);
+ W[P0] = R2;
+
+ SSYNC;
+ IDLE;
+
+ call _test_pll_locked;
+
+ P0.H = hi(PLL_CTL);
+ P0.L = lo(PLL_CTL);
+ R0 = W[P0](z);
+ BITSET (R0, 3);
+ W[P0] = R0.L;
+
+ R0 = P3;
+ call _set_sic_iwr;
+
+ SSYNC;
+ IDLE;
+
+ call _test_pll_locked;
+
+ R0 = IWR_ENABLE(0);
+ call _set_sic_iwr;
+
+ P0.H = hi(VR_CTL);
+ P0.L = lo(VR_CTL);
+ W[P0]= R7;
+
+ SSYNC;
+ IDLE;
+
+ call _test_pll_locked;
+
+ P0.H = hi(PLL_DIV);
+ P0.L = lo(PLL_DIV);
+ W[P0]= R6;
+
+ P0.H = hi(PLL_CTL);
+ P0.L = lo(PLL_CTL);
+ w[p0] = R5;
+ IDLE;
+ call _test_pll_locked;
+
+ call _unset_sdram_srfs;
+
+ STI R4;
+
+ RETS = [SP++];
+ ( R7:0, P5:0 ) = [SP++];
+ RTS;
+
+ENTRY(_set_sdram_srfs)
+ /* set the sdram to self refresh mode */
+ P0.H = hi(EBIU_SDGCTL);
+ P0.L = lo(EBIU_SDGCTL);
+ R2 = [P0];
+ R3.H = hi(SRFS);
+ R3.L = lo(SRFS);
+ R2 = R2|R3;
+ [P0] = R2;
+ ssync;
+ RTS;
+
+ENTRY(_unset_sdram_srfs)
+ /* set the sdram out of self refresh mode */
+ P0.H = hi(EBIU_SDGCTL);
+ P0.L = lo(EBIU_SDGCTL);
+ R2 = [P0];
+ R3.H = hi(SRFS);
+ R3.L = lo(SRFS);
+ R3 = ~R3;
+ R2 = R2&R3;
+ [P0] = R2;
+ ssync;
+ RTS;
+
+ENTRY(_set_sic_iwr)
+ P0.H = hi(SIC_IWR);
+ P0.L = lo(SIC_IWR);
+ [P0] = R0;
+ SSYNC;
+ RTS;
+
+ENTRY(_set_rtc_istat)
+ P0.H = hi(RTC_ISTAT);
+ P0.L = lo(RTC_ISTAT);
+ w[P0] = R0.L;
+ SSYNC;
+ RTS;
+
+ENTRY(_test_pll_locked)
+ P0.H = hi(PLL_STAT);
+ P0.L = lo(PLL_STAT);
+1:
+ R0 = W[P0] (Z);
+ CC = BITTST(R0,5);
+ IF !CC JUMP 1b;
+ RTS;
+#endif
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
new file mode 100644
index 000000000000..8eb0a9023482
--- /dev/null
+++ b/arch/blackfin/mach-common/entry.S
@@ -0,0 +1,1207 @@
+/*
+ * File: arch/blackfin/mach-common/entry.S
+ * Based on:
+ * Author: Linus Torvalds
+ *
+ * Created: ?
+ * Description: contains the system-call and fault low-level handling routines.
+ * This also contains the timer-interrupt handler, as well as all
+ * interrupts and faults that can result in a task-switch.
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+ * 25-Dec-2004 - LG Soft India
+ * 1. Fix in return_from_int, to make sure any pending
+ * system call in ILAT for this process to get
+ * executed, otherwise in case context switch happens,
+ * system call of first process (i.e in ILAT) will be
+ * carried forward to the switched process.
+ * 2. Removed Constant references for the following
+ * a. IPEND
+ * b. EXCAUSE mask
+ * c. PAGE Mask
+ */
+
+/*
+ * NOTE: This code handles signal-recognition, which happens every time
+ * after a timer-interrupt and after each system call.
+ */
+
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+#include <asm/unistd.h>
+#include <asm/errno.h>
+#include <asm/thread_info.h> /* TIF_NEED_RESCHED */
+#include <asm/asm-offsets.h>
+
+#include <asm/mach-common/context.S>
+
+#ifdef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
+ /*
+ * TODO: this should be proper save/restore, but for now
+ * we'll just cheat and use 0x1/0x13
+ */
+# define DEBUG_START_HWTRACE \
+ P5.l = LO(TBUFCTL); \
+ P5.h = HI(TBUFCTL); \
+ R7 = 0x13; \
+ [P5] = R7;
+# define DEBUG_STOP_HWTRACE \
+ P5.l = LO(TBUFCTL); \
+ P5.h = HI(TBUFCTL); \
+ R7 = 0x01; \
+ [P5] = R7;
+#else
+# define DEBUG_START_HWTRACE
+# define DEBUG_STOP_HWTRACE
+#endif
+
+#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
+.section .l1.text
+#else
+.text
+#endif
+
+/* Slightly simplified and streamlined entry point for CPLB misses.
+ * This one does not lower the level to IRQ5, and thus can be used to
+ * patch up CPLB misses on the kernel stack.
+ */
+ENTRY(_ex_dcplb)
+#if defined(ANOMALY_05000261)
+ /*
+ * Work around an anomaly: if we see a new DCPLB fault, return
+ * without doing anything. Then, if we get the same fault again,
+ * handle it.
+ */
+ p5.l = _last_cplb_fault_retx;
+ p5.h = _last_cplb_fault_retx;
+ r7 = [p5];
+ r6 = retx;
+ [p5] = r6;
+ cc = r6 == r7;
+ if !cc jump _return_from_exception;
+ /* fall through */
+#endif
+
+ENTRY(_ex_icplb)
+ (R7:6,P5:4) = [sp++];
+ ASTAT = [sp++];
+ SAVE_ALL_SYS
+ call __cplb_hdr;
+ DEBUG_START_HWTRACE
+ RESTORE_ALL_SYS
+ SP = RETN;
+ rtx;
+
+ENTRY(_ex_spinlock)
+ /* Transform this into a syscall - twiddle the syscall vector. */
+ p5.l = lo(EVT15);
+ p5.h = hi(EVT15);
+ r7.l = _spinlock_bh;
+ r7.h = _spinlock_bh;
+ [p5] = r7;
+ csync;
+ /* Fall through. */
+
+ENTRY(_ex_syscall)
+ DEBUG_START_HWTRACE
+ (R7:6,P5:4) = [sp++];
+ ASTAT = [sp++];
+ raise 15; /* invoked by TRAP #0, for sys call */
+ sp = retn;
+ rtx
+
+ENTRY(_spinlock_bh)
+ SAVE_ALL_SYS
+ /* To end up here, vector 15 was changed - so we have to change it
+ * back.
+ */
+ p0.l = lo(EVT15);
+ p0.h = hi(EVT15);
+ p1.l = _evt_system_call;
+ p1.h = _evt_system_call;
+ [p0] = p1;
+ csync;
+ r0 = [sp + PT_R0];
+ sp += -12;
+ call _sys_bfin_spinlock;
+ sp += 12;
+ [SP + PT_R0] = R0;
+ RESTORE_ALL_SYS
+ rti;
+
+ENTRY(_ex_soft_bp)
+ r7 = retx;
+ r7 += -2;
+ retx = r7;
+ jump.s _ex_trap_c;
+
+ENTRY(_ex_single_step)
+ r7 = retx;
+ r6 = reti;
+ cc = r7 == r6;
+ if cc jump _return_from_exception
+ r7 = syscfg;
+ bitclr (r7, 0);
+ syscfg = R7;
+
+ p5.l = lo(IPEND);
+ p5.h = hi(IPEND);
+ r6 = [p5];
+ cc = bittst(r6, 5);
+ if !cc jump _ex_trap_c;
+ p4.l = lo(EVT5);
+ p4.h = hi(EVT5);
+ r6.h = _exception_to_level5;
+ r6.l = _exception_to_level5;
+ r7 = [p4];
+ cc = r6 == r7;
+ if !cc jump _ex_trap_c;
+
+_return_from_exception:
+ DEBUG_START_HWTRACE
+ (R7:6,P5:4) = [sp++];
+ ASTAT = [sp++];
+ sp = retn;
+ rtx;
+
+ENTRY(_handle_bad_cplb)
+ /* To get here, we just tried and failed to change a CPLB
+ * so, handle things in trap_c (C code), by lowering to
+ * IRQ5, just like we normally do. Since this is not a
+ * "normal" return path, we have a do alot of stuff to
+ * the stack to get ready so, we can fall through - we
+ * need to make a CPLB exception look like a normal exception
+ */
+
+ DEBUG_START_HWTRACE
+ RESTORE_ALL_SYS
+ [--sp] = ASTAT;
+ [--sp] = (R7:6, P5:4);
+
+ENTRY(_ex_trap_c)
+ /* Call C code (trap_c) to handle the exception, which most
+ * likely involves sending a signal to the current process.
+ * To avoid double faults, lower our priority to IRQ5 first.
+ */
+ P5.h = _exception_to_level5;
+ P5.l = _exception_to_level5;
+ p4.l = lo(EVT5);
+ p4.h = hi(EVT5);
+ [p4] = p5;
+ csync;
+
+ /* Disable all interrupts, but make sure level 5 is enabled so
+ * we can switch to that level. Save the old mask. */
+ cli r6;
+ p4.l = _excpt_saved_imask;
+ p4.h = _excpt_saved_imask;
+ [p4] = r6;
+ r6 = 0x3f;
+ sti r6;
+
+ /* Save the excause into a circular buffer, in case the instruction
+ * which caused this excecptions causes others.
+ */
+ P5.l = _in_ptr_excause;
+ P5.h = _in_ptr_excause;
+ R7 = [P5];
+ R7 += 4;
+ R6 = 0xF;
+ R7 = R7 & R6;
+ [P5] = R7;
+ R6.l = _excause_circ_buf;
+ R6.h = _excause_circ_buf;
+ R7 = R7 + R6;
+ p5 = R7;
+ R6 = SEQSTAT;
+ [P5] = R6;
+
+ DEBUG_START_HWTRACE
+ (R7:6,P5:4) = [sp++];
+ ASTAT = [sp++];
+ SP = RETN;
+ raise 5;
+ rtx;
+
+ENTRY(_exception_to_level5)
+ SAVE_ALL_SYS
+
+ /* Restore interrupt mask. We haven't pushed RETI, so this
+ * doesn't enable interrupts until we return from this handler. */
+ p4.l = _excpt_saved_imask;
+ p4.h = _excpt_saved_imask;
+ r6 = [p4];
+ sti r6;
+
+ /* Restore the hardware error vector. */
+ P5.h = _evt_ivhw;
+ P5.l = _evt_ivhw;
+ p4.l = lo(EVT5);
+ p4.h = hi(EVT5);
+ [p4] = p5;
+ csync;
+
+ p2.l = lo(IPEND);
+ p2.h = hi(IPEND);
+ csync;
+ r0 = [p2]; /* Read current IPEND */
+ [sp + PT_IPEND] = r0; /* Store IPEND */
+
+ /* Pop the excause from the circular buffer and push it on the stack
+ * (in the right place - if you change the location of SEQSTAT, you
+ * must change this offset.
+ */
+.L_excep_to_5_again:
+ P5.l = _out_ptr_excause;
+ P5.h = _out_ptr_excause;
+ R7 = [P5];
+ R7 += 4;
+ R6 = 0xF;
+ R7 = R7 & R6;
+ [P5] = R7;
+ R6.l = _excause_circ_buf;
+ R6.h = _excause_circ_buf;
+ R7 = R7 + R6;
+ P5 = R7;
+ R1 = [P5];
+ [SP + 8] = r1;
+
+ r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
+ SP += -12;
+ call _trap_c;
+ SP += 12;
+
+ /* See if anything else is in the exception buffer
+ * if there is, process it
+ */
+ P5.l = _out_ptr_excause;
+ P5.h = _out_ptr_excause;
+ P4.l = _in_ptr_excause;
+ P4.h = _in_ptr_excause;
+ R6 = [P5];
+ R7 = [P4];
+ CC = R6 == R7;
+ if ! CC JUMP .L_excep_to_5_again
+
+ call _ret_from_exception;
+ RESTORE_ALL_SYS
+ rti;
+
+ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
+ /* Since the kernel stack can be anywhere, it's not guaranteed to be
+ * covered by a CPLB. Switch to an exception stack; use RETN as a
+ * scratch register (for want of a better option).
+ */
+ retn = sp;
+ sp.l = _exception_stack_top;
+ sp.h = _exception_stack_top;
+ /* Try to deal with syscalls quickly. */
+ [--sp] = ASTAT;
+ [--sp] = (R7:6, P5:4);
+ DEBUG_STOP_HWTRACE
+ r7 = SEQSTAT; /* reason code is in bit 5:0 */
+ r6.l = lo(SEQSTAT_EXCAUSE);
+ r6.h = hi(SEQSTAT_EXCAUSE);
+ r7 = r7 & r6;
+ p5.h = _extable;
+ p5.l = _extable;
+ p4 = r7;
+ p5 = p5 + (p4 << 2);
+ p4 = [p5];
+ jump (p4);
+
+.Lbadsys:
+ r7 = -ENOSYS; /* signextending enough */
+ [sp + PT_R0] = r7; /* return value from system call */
+ jump .Lsyscall_really_exit;
+
+ENTRY(_kernel_execve)
+ link SIZEOF_PTREGS;
+ p0 = sp;
+ r3 = SIZEOF_PTREGS / 4;
+ r4 = 0(x);
+0:
+ [p0++] = r4;
+ r3 += -1;
+ cc = r3 == 0;
+ if !cc jump 0b (bp);
+
+ p0 = sp;
+ sp += -16;
+ [sp + 12] = p0;
+ call _do_execve;
+ SP += 16;
+ cc = r0 == 0;
+ if ! cc jump 1f;
+ /* Success. Copy our temporary pt_regs to the top of the kernel
+ * stack and do a normal exception return.
+ */
+ r1 = sp;
+ r0 = (-KERNEL_STACK_SIZE) (x);
+ r1 = r1 & r0;
+ p2 = r1;
+ p3 = [p2];
+ r0 = KERNEL_STACK_SIZE - 4 (z);
+ p1 = r0;
+ p1 = p1 + p2;
+
+ p0 = fp;
+ r4 = [p0--];
+ r3 = SIZEOF_PTREGS / 4;
+0:
+ r4 = [p0--];
+ [p1--] = r4;
+ r3 += -1;
+ cc = r3 == 0;
+ if ! cc jump 0b (bp);
+
+ r0 = (KERNEL_STACK_SIZE - SIZEOF_PTREGS) (z);
+ p1 = r0;
+ p1 = p1 + p2;
+ sp = p1;
+ r0 = syscfg;
+ [SP + PT_SYSCFG] = r0;
+ [p3 + (TASK_THREAD + THREAD_KSP)] = sp;
+
+ RESTORE_CONTEXT;
+ rti;
+1:
+ unlink;
+ rts;
+
+ENTRY(_system_call)
+ /* Store IPEND */
+ p2.l = lo(IPEND);
+ p2.h = hi(IPEND);
+ csync;
+ r0 = [p2];
+ [sp + PT_IPEND] = r0;
+
+ /* Store RETS for now */
+ r0 = rets;
+ [sp + PT_RESERVED] = r0;
+ /* Set the stack for the current process */
+ r7 = sp;
+ r6.l = lo(ALIGN_PAGE_MASK);
+ r6.h = hi(ALIGN_PAGE_MASK);
+ r7 = r7 & r6; /* thread_info */
+ p2 = r7;
+ p2 = [p2];
+
+ [p2+(TASK_THREAD+THREAD_KSP)] = sp;
+
+ /* Check the System Call */
+ r7 = __NR_syscall;
+ /* System call number is passed in P0 */
+ r6 = p0;
+ cc = r6 < r7;
+ if ! cc jump .Lbadsys;
+
+ /* are we tracing syscalls?*/
+ r7 = sp;
+ r6.l = lo(ALIGN_PAGE_MASK);
+ r6.h = hi(ALIGN_PAGE_MASK);
+ r7 = r7 & r6;
+ p2 = r7;
+ r7 = [p2+TI_FLAGS];
+ CC = BITTST(r7,TIF_SYSCALL_TRACE);
+ if CC JUMP _sys_trace;
+
+ /* Execute the appropriate system call */
+
+ p4 = p0;
+ p5.l = _sys_call_table;
+ p5.h = _sys_call_table;
+ p5 = p5 + (p4 << 2);
+ r0 = [sp + PT_R0];
+ r1 = [sp + PT_R1];
+ r2 = [sp + PT_R2];
+ p5 = [p5];
+
+ [--sp] = r5;
+ [--sp] = r4;
+ [--sp] = r3;
+ SP += -12;
+ call (p5);
+ SP += 24;
+ [sp + PT_R0] = r0;
+
+.Lresume_userspace:
+ r7 = sp;
+ r4.l = lo(ALIGN_PAGE_MASK);
+ r4.h = hi(ALIGN_PAGE_MASK);
+ r7 = r7 & r4; /* thread_info->flags */
+ p5 = r7;
+.Lresume_userspace_1:
+ /* Disable interrupts. */
+ [--sp] = reti;
+ reti = [sp++];
+
+ r7 = [p5 + TI_FLAGS];
+ r4.l = lo(_TIF_WORK_MASK);
+ r4.h = hi(_TIF_WORK_MASK);
+ r7 = r7 & r4;
+
+.Lsyscall_resched:
+ cc = BITTST(r7, TIF_NEED_RESCHED);
+ if !cc jump .Lsyscall_sigpending;
+
+ /* Reenable interrupts. */
+ [--sp] = reti;
+ r0 = [sp++];
+
+ SP += -12;
+ call _schedule;
+ SP += 12;
+
+ jump .Lresume_userspace_1;
+
+.Lsyscall_sigpending:
+ cc = BITTST(r7, TIF_RESTORE_SIGMASK);
+ if cc jump .Lsyscall_do_signals;
+ cc = BITTST(r7, TIF_SIGPENDING);
+ if !cc jump .Lsyscall_really_exit;
+.Lsyscall_do_signals:
+ /* Reenable interrupts. */
+ [--sp] = reti;
+ r0 = [sp++];
+
+ r0 = sp;
+ SP += -12;
+ call _do_signal;
+ SP += 12;
+
+.Lsyscall_really_exit:
+ r5 = [sp + PT_RESERVED];
+ rets = r5;
+ rts;
+
+_sys_trace:
+ call _syscall_trace;
+
+ /* Execute the appropriate system call */
+
+ p4 = [SP + PT_P0];
+ p5.l = _sys_call_table;
+ p5.h = _sys_call_table;
+ p5 = p5 + (p4 << 2);
+ r0 = [sp + PT_R0];
+ r1 = [sp + PT_R1];
+ r2 = [sp + PT_R2];
+ r3 = [sp + PT_R3];
+ r4 = [sp + PT_R4];
+ r5 = [sp + PT_R5];
+ p5 = [p5];
+
+ [--sp] = r5;
+ [--sp] = r4;
+ [--sp] = r3;
+ SP += -12;
+ call (p5);
+ SP += 24;
+ [sp + PT_R0] = r0;
+
+ call _syscall_trace;
+ jump .Lresume_userspace;
+
+ENTRY(_resume)
+ /*
+ * Beware - when entering resume, prev (the current task) is
+ * in r0, next (the new task) is in r1.
+ */
+ p0 = r0;
+ p1 = r1;
+ [--sp] = rets;
+ [--sp] = fp;
+ [--sp] = (r7:4, p5:3);
+
+ /* save usp */
+ p2 = usp;
+ [p0+(TASK_THREAD+THREAD_USP)] = p2;
+
+ /* save current kernel stack pointer */
+ [p0+(TASK_THREAD+THREAD_KSP)] = sp;
+
+ /* save program counter */
+ r1.l = _new_old_task;
+ r1.h = _new_old_task;
+ [p0+(TASK_THREAD+THREAD_PC)] = r1;
+
+ /* restore the kernel stack pointer */
+ sp = [p1+(TASK_THREAD+THREAD_KSP)];
+
+ /* restore user stack pointer */
+ p0 = [p1+(TASK_THREAD+THREAD_USP)];
+ usp = p0;
+
+ /* restore pc */
+ p0 = [p1+(TASK_THREAD+THREAD_PC)];
+ jump (p0);
+
+ /*
+ * Following code actually lands up in a new (old) task.
+ */
+
+_new_old_task:
+ (r7:4, p5:3) = [sp++];
+ fp = [sp++];
+ rets = [sp++];
+
+ /*
+ * When we come out of resume, r0 carries "old" task, becuase we are
+ * in "new" task.
+ */
+ rts;
+
+ENTRY(_ret_from_exception)
+ p2.l = lo(IPEND);
+ p2.h = hi(IPEND);
+
+ csync;
+ r0 = [p2];
+ [sp + PT_IPEND] = r0;
+
+1:
+ r1 = 0x37(Z);
+ r2 = ~r1;
+ r2.h = 0;
+ r0 = r2 & r0;
+ cc = r0 == 0;
+ if !cc jump 4f; /* if not return to user mode, get out */
+
+ /* Make sure any pending system call or deferred exception
+ * return in ILAT for this process to get executed, otherwise
+ * in case context switch happens, system call of
+ * first process (i.e in ILAT) will be carried
+ * forward to the switched process
+ */
+
+ p2.l = lo(ILAT);
+ p2.h = hi(ILAT);
+ r0 = [p2];
+ r1 = (EVT_IVG14 | EVT_IVG15) (z);
+ r0 = r0 & r1;
+ cc = r0 == 0;
+ if !cc jump 5f;
+
+ /* Set the stack for the current process */
+ r7 = sp;
+ r4.l = lo(ALIGN_PAGE_MASK);
+ r4.h = hi(ALIGN_PAGE_MASK);
+ r7 = r7 & r4; /* thread_info->flags */
+ p5 = r7;
+ r7 = [p5 + TI_FLAGS];
+ r4.l = lo(_TIF_WORK_MASK);
+ r4.h = hi(_TIF_WORK_MASK);
+ r7 = r7 & r4;
+ cc = r7 == 0;
+ if cc jump 4f;
+
+ p0.l = lo(EVT15);
+ p0.h = hi(EVT15);
+ p1.l = _schedule_and_signal;
+ p1.h = _schedule_and_signal;
+ [p0] = p1;
+ csync;
+ raise 15; /* raise evt14 to do signal or reschedule */
+4:
+ r0 = syscfg;
+ bitclr(r0, 0);
+ syscfg = r0;
+5:
+ rts;
+
+ENTRY(_return_from_int)
+ /* If someone else already raised IRQ 15, do nothing. */
+ csync;
+ p2.l = lo(ILAT);
+ p2.h = hi(ILAT);
+ r0 = [p2];
+ cc = bittst (r0, EVT_IVG15_P);
+ if cc jump 2f;
+
+ /* if not return to user mode, get out */
+ p2.l = lo(IPEND);
+ p2.h = hi(IPEND);
+ r0 = [p2];
+ r1 = 0x17(Z);
+ r2 = ~r1;
+ r2.h = 0;
+ r0 = r2 & r0;
+ r1 = 1;
+ r1 = r0 - r1;
+ r2 = r0 & r1;
+ cc = r2 == 0;
+ if !cc jump 2f;
+
+ /* Lower the interrupt level to 15. */
+ p0.l = lo(EVT15);
+ p0.h = hi(EVT15);
+ p1.l = _schedule_and_signal_from_int;
+ p1.h = _schedule_and_signal_from_int;
+ [p0] = p1;
+ csync;
+#if defined(ANOMALY_05000281)
+ r0.l = lo(CONFIG_BOOT_LOAD);
+ r0.h = hi(CONFIG_BOOT_LOAD);
+ reti = r0;
+#endif
+ r0 = 0x801f (z);
+ STI r0;
+ raise 15; /* raise evt15 to do signal or reschedule */
+ rti;
+2:
+ rts;
+
+ENTRY(_lower_to_irq14)
+#if defined(ANOMALY_05000281)
+ r0.l = lo(CONFIG_BOOT_LOAD);
+ r0.h = hi(CONFIG_BOOT_LOAD);
+ reti = r0;
+#endif
+ r0 = 0x401f;
+ sti r0;
+ raise 14;
+ rti;
+ENTRY(_evt14_softirq)
+#ifdef CONFIG_DEBUG_HWERR
+ r0 = 0x3f;
+ sti r0;
+#else
+ cli r0;
+#endif
+ [--sp] = RETI;
+ SP += 4;
+ rts;
+
+_schedule_and_signal_from_int:
+ /* To end up here, vector 15 was changed - so we have to change it
+ * back.
+ */
+ p0.l = lo(EVT15);
+ p0.h = hi(EVT15);
+ p1.l = _evt_system_call;
+ p1.h = _evt_system_call;
+ [p0] = p1;
+ csync;
+ p1 = rets;
+ [sp + PT_RESERVED] = p1;
+
+ p0.l = _irq_flags;
+ p0.h = _irq_flags;
+ r0 = [p0];
+ sti r0;
+
+ jump.s .Lresume_userspace;
+
+_schedule_and_signal:
+ SAVE_CONTEXT_SYSCALL
+ /* To end up here, vector 15 was changed - so we have to change it
+ * back.
+ */
+ p0.l = lo(EVT15);
+ p0.h = hi(EVT15);
+ p1.l = _evt_system_call;
+ p1.h = _evt_system_call;
+ [p0] = p1;
+ csync;
+ p0.l = 1f;
+ p0.h = 1f;
+ [sp + PT_RESERVED] = P0;
+ call .Lresume_userspace;
+1:
+ RESTORE_CONTEXT
+ rti;
+
+/* Make sure when we start, that the circular buffer is initialized properly
+ * R0 and P0 are call clobbered, so we can use them here.
+ */
+ENTRY(_init_exception_buff)
+ r0 = 0;
+ p0.h = _in_ptr_excause;
+ p0.l = _in_ptr_excause;
+ [p0] = r0;
+ p0.h = _out_ptr_excause;
+ p0.l = _out_ptr_excause;
+ [p0] = r0;
+ rts;
+
+/*
+ * Put these in the kernel data section - that should always be covered by
+ * a CPLB. This is needed to ensure we don't get double fault conditions
+ */
+
+#ifdef CONFIG_SYSCALL_TAB_L1
+.section .l1.data
+#else
+.data
+#endif
+ALIGN
+_extable:
+ /* entry for each EXCAUSE[5:0]
+ * This table bmust be in sync with the table in ./kernel/traps.c
+ * EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined
+ */
+ .long _ex_syscall; /* 0x00 - User Defined - Linux Syscall */
+ .long _ex_soft_bp /* 0x01 - User Defined - Software breakpoint */
+ .long _ex_trap_c /* 0x02 - User Defined */
+ .long _ex_trap_c /* 0x03 - User Defined - Atomic test and set service */
+ .long _ex_spinlock /* 0x04 - User Defined */
+ .long _ex_trap_c /* 0x05 - User Defined */
+ .long _ex_trap_c /* 0x06 - User Defined */
+ .long _ex_trap_c /* 0x07 - User Defined */
+ .long _ex_trap_c /* 0x08 - User Defined */
+ .long _ex_trap_c /* 0x09 - User Defined */
+ .long _ex_trap_c /* 0x0A - User Defined */
+ .long _ex_trap_c /* 0x0B - User Defined */
+ .long _ex_trap_c /* 0x0C - User Defined */
+ .long _ex_trap_c /* 0x0D - User Defined */
+ .long _ex_trap_c /* 0x0E - User Defined */
+ .long _ex_trap_c /* 0x0F - User Defined */
+ .long _ex_single_step /* 0x10 - HW Single step */
+ .long _ex_trap_c /* 0x11 - Trace Buffer Full */
+ .long _ex_trap_c /* 0x12 - Reserved */
+ .long _ex_trap_c /* 0x13 - Reserved */
+ .long _ex_trap_c /* 0x14 - Reserved */
+ .long _ex_trap_c /* 0x15 - Reserved */
+ .long _ex_trap_c /* 0x16 - Reserved */
+ .long _ex_trap_c /* 0x17 - Reserved */
+ .long _ex_trap_c /* 0x18 - Reserved */
+ .long _ex_trap_c /* 0x19 - Reserved */
+ .long _ex_trap_c /* 0x1A - Reserved */
+ .long _ex_trap_c /* 0x1B - Reserved */
+ .long _ex_trap_c /* 0x1C - Reserved */
+ .long _ex_trap_c /* 0x1D - Reserved */
+ .long _ex_trap_c /* 0x1E - Reserved */
+ .long _ex_trap_c /* 0x1F - Reserved */
+ .long _ex_trap_c /* 0x20 - Reserved */
+ .long _ex_trap_c /* 0x21 - Undefined Instruction */
+ .long _ex_trap_c /* 0x22 - Illegal Instruction Combination */
+ .long _ex_dcplb /* 0x23 - Data CPLB Protection Violation */
+ .long _ex_trap_c /* 0x24 - Data access misaligned */
+ .long _ex_trap_c /* 0x25 - Unrecoverable Event */
+ .long _ex_dcplb /* 0x26 - Data CPLB Miss */
+ .long _ex_trap_c /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero */
+ .long _ex_trap_c /* 0x28 - Emulation Watchpoint */
+ .long _ex_trap_c /* 0x29 - Instruction fetch access error (535 only) */
+ .long _ex_trap_c /* 0x2A - Instruction fetch misaligned */
+ .long _ex_icplb /* 0x2B - Instruction CPLB protection Violation */
+ .long _ex_icplb /* 0x2C - Instruction CPLB miss */
+ .long _ex_trap_c /* 0x2D - Instruction CPLB Multiple Hits */
+ .long _ex_trap_c /* 0x2E - Illegal use of Supervisor Resource */
+ .long _ex_trap_c /* 0x2E - Illegal use of Supervisor Resource */
+ .long _ex_trap_c /* 0x2F - Reserved */
+ .long _ex_trap_c /* 0x30 - Reserved */
+ .long _ex_trap_c /* 0x31 - Reserved */
+ .long _ex_trap_c /* 0x32 - Reserved */
+ .long _ex_trap_c /* 0x33 - Reserved */
+ .long _ex_trap_c /* 0x34 - Reserved */
+ .long _ex_trap_c /* 0x35 - Reserved */
+ .long _ex_trap_c /* 0x36 - Reserved */
+ .long _ex_trap_c /* 0x37 - Reserved */
+ .long _ex_trap_c /* 0x38 - Reserved */
+ .long _ex_trap_c /* 0x39 - Reserved */
+ .long _ex_trap_c /* 0x3A - Reserved */
+ .long _ex_trap_c /* 0x3B - Reserved */
+ .long _ex_trap_c /* 0x3C - Reserved */
+ .long _ex_trap_c /* 0x3D - Reserved */
+ .long _ex_trap_c /* 0x3E - Reserved */
+ .long _ex_trap_c /* 0x3F - Reserved */
+
+ALIGN
+ENTRY(_sys_call_table)
+ .long _sys_ni_syscall /* 0 - old "setup()" system call*/
+ .long _sys_exit
+ .long _sys_fork
+ .long _sys_read
+ .long _sys_write
+ .long _sys_open /* 5 */
+ .long _sys_close
+ .long _sys_ni_syscall /* old waitpid */
+ .long _sys_creat
+ .long _sys_link
+ .long _sys_unlink /* 10 */
+ .long _sys_execve
+ .long _sys_chdir
+ .long _sys_time
+ .long _sys_mknod
+ .long _sys_chmod /* 15 */
+ .long _sys_chown /* chown16 */
+ .long _sys_ni_syscall /* old break syscall holder */
+ .long _sys_ni_syscall /* old stat */
+ .long _sys_lseek
+ .long _sys_getpid /* 20 */
+ .long _sys_mount
+ .long _sys_ni_syscall /* old umount */
+ .long _sys_setuid
+ .long _sys_getuid
+ .long _sys_stime /* 25 */
+ .long _sys_ptrace
+ .long _sys_alarm
+ .long _sys_ni_syscall /* old fstat */
+ .long _sys_pause
+ .long _sys_ni_syscall /* old utime */ /* 30 */
+ .long _sys_ni_syscall /* old stty syscall holder */
+ .long _sys_ni_syscall /* old gtty syscall holder */
+ .long _sys_access
+ .long _sys_nice
+ .long _sys_ni_syscall /* 35 */ /* old ftime syscall holder */
+ .long _sys_sync
+ .long _sys_kill
+ .long _sys_rename
+ .long _sys_mkdir
+ .long _sys_rmdir /* 40 */
+ .long _sys_dup
+ .long _sys_pipe
+ .long _sys_times
+ .long _sys_ni_syscall /* old prof syscall holder */
+ .long _sys_brk /* 45 */
+ .long _sys_setgid
+ .long _sys_getgid
+ .long _sys_ni_syscall /* old sys_signal */
+ .long _sys_geteuid /* geteuid16 */
+ .long _sys_getegid /* getegid16 */ /* 50 */
+ .long _sys_acct
+ .long _sys_umount /* recycled never used phys() */
+ .long _sys_ni_syscall /* old lock syscall holder */
+ .long _sys_ioctl
+ .long _sys_fcntl /* 55 */
+ .long _sys_ni_syscall /* old mpx syscall holder */
+ .long _sys_setpgid
+ .long _sys_ni_syscall /* old ulimit syscall holder */
+ .long _sys_ni_syscall /* old old uname */
+ .long _sys_umask /* 60 */
+ .long _sys_chroot
+ .long _sys_ustat
+ .long _sys_dup2
+ .long _sys_getppid
+ .long _sys_getpgrp /* 65 */
+ .long _sys_setsid
+ .long _sys_ni_syscall /* old sys_sigaction */
+ .long _sys_sgetmask
+ .long _sys_ssetmask
+ .long _sys_setreuid /* setreuid16 */ /* 70 */
+ .long _sys_setregid /* setregid16 */
+ .long _sys_ni_syscall /* old sys_sigsuspend */
+ .long _sys_ni_syscall /* old sys_sigpending */
+ .long _sys_sethostname
+ .long _sys_setrlimit /* 75 */
+ .long _sys_ni_syscall /* old getrlimit */
+ .long _sys_getrusage
+ .long _sys_gettimeofday
+ .long _sys_settimeofday
+ .long _sys_getgroups /* getgroups16 */ /* 80 */
+ .long _sys_setgroups /* setgroups16 */
+ .long _sys_ni_syscall /* old_select */
+ .long _sys_symlink
+ .long _sys_ni_syscall /* old lstat */
+ .long _sys_readlink /* 85 */
+ .long _sys_uselib
+ .long _sys_ni_syscall /* sys_swapon */
+ .long _sys_reboot
+ .long _sys_ni_syscall /* old_readdir */
+ .long _sys_ni_syscall /* sys_mmap */ /* 90 */
+ .long _sys_munmap
+ .long _sys_truncate
+ .long _sys_ftruncate
+ .long _sys_fchmod
+ .long _sys_fchown /* fchown16 */ /* 95 */
+ .long _sys_getpriority
+ .long _sys_setpriority
+ .long _sys_ni_syscall /* old profil syscall holder */
+ .long _sys_statfs
+ .long _sys_fstatfs /* 100 */
+ .long _sys_ni_syscall
+ .long _sys_ni_syscall /* old sys_socketcall */
+ .long _sys_syslog
+ .long _sys_setitimer
+ .long _sys_getitimer /* 105 */
+ .long _sys_newstat
+ .long _sys_newlstat
+ .long _sys_newfstat
+ .long _sys_ni_syscall /* old uname */
+ .long _sys_ni_syscall /* iopl for i386 */ /* 110 */
+ .long _sys_vhangup
+ .long _sys_ni_syscall /* obsolete idle() syscall */
+ .long _sys_ni_syscall /* vm86old for i386 */
+ .long _sys_wait4
+ .long _sys_ni_syscall /* 115 */ /* sys_swapoff */
+ .long _sys_sysinfo
+ .long _sys_ni_syscall /* old sys_ipc */
+ .long _sys_fsync
+ .long _sys_ni_syscall /* old sys_sigreturn */
+ .long _sys_clone /* 120 */
+ .long _sys_setdomainname
+ .long _sys_newuname
+ .long _sys_ni_syscall /* old sys_modify_ldt */
+ .long _sys_adjtimex
+ .long _sys_ni_syscall /* 125 */ /* sys_mprotect */
+ .long _sys_ni_syscall /* old sys_sigprocmask */
+ .long _sys_ni_syscall /* old "creat_module" */
+ .long _sys_init_module
+ .long _sys_delete_module
+ .long _sys_ni_syscall /* 130: old "get_kernel_syms" */
+ .long _sys_quotactl
+ .long _sys_getpgid
+ .long _sys_fchdir
+ .long _sys_bdflush
+ .long _sys_ni_syscall /* 135 */ /* sys_sysfs */
+ .long _sys_personality
+ .long _sys_ni_syscall /* for afs_syscall */
+ .long _sys_setfsuid /* setfsuid16 */
+ .long _sys_setfsgid /* setfsgid16 */
+ .long _sys_llseek /* 140 */
+ .long _sys_getdents
+ .long _sys_ni_syscall /* sys_select */
+ .long _sys_flock
+ .long _sys_ni_syscall /* sys_msync */
+ .long _sys_readv /* 145 */
+ .long _sys_writev
+ .long _sys_getsid
+ .long _sys_fdatasync
+ .long _sys_sysctl
+ .long _sys_ni_syscall /* 150 */ /* sys_mlock */
+ .long _sys_ni_syscall /* sys_munlock */
+ .long _sys_ni_syscall /* sys_mlockall */
+ .long _sys_ni_syscall /* sys_munlockall */
+ .long _sys_sched_setparam
+ .long _sys_sched_getparam /* 155 */
+ .long _sys_sched_setscheduler
+ .long _sys_sched_getscheduler
+ .long _sys_sched_yield
+ .long _sys_sched_get_priority_max
+ .long _sys_sched_get_priority_min /* 160 */
+ .long _sys_sched_rr_get_interval
+ .long _sys_nanosleep
+ .long _sys_ni_syscall /* sys_mremap */
+ .long _sys_setresuid /* setresuid16 */
+ .long _sys_getresuid /* getresuid16 */ /* 165 */
+ .long _sys_ni_syscall /* for vm86 */
+ .long _sys_ni_syscall /* old "query_module" */
+ .long _sys_ni_syscall /* sys_poll */
+ .long _sys_ni_syscall /* sys_nfsservctl */
+ .long _sys_setresgid /* setresgid16 */ /* 170 */
+ .long _sys_getresgid /* getresgid16 */
+ .long _sys_prctl
+ .long _sys_rt_sigreturn
+ .long _sys_rt_sigaction
+ .long _sys_rt_sigprocmask /* 175 */
+ .long _sys_rt_sigpending
+ .long _sys_rt_sigtimedwait
+ .long _sys_rt_sigqueueinfo
+ .long _sys_rt_sigsuspend
+ .long _sys_pread64 /* 180 */
+ .long _sys_pwrite64
+ .long _sys_lchown /* lchown16 */
+ .long _sys_getcwd
+ .long _sys_capget
+ .long _sys_capset /* 185 */
+ .long _sys_sigaltstack
+ .long _sys_sendfile
+ .long _sys_ni_syscall /* streams1 */
+ .long _sys_ni_syscall /* streams2 */
+ .long _sys_vfork /* 190 */
+ .long _sys_getrlimit
+ .long _sys_mmap2
+ .long _sys_truncate64
+ .long _sys_ftruncate64
+ .long _sys_stat64 /* 195 */
+ .long _sys_lstat64
+ .long _sys_fstat64
+ .long _sys_chown
+ .long _sys_getuid
+ .long _sys_getgid /* 200 */
+ .long _sys_geteuid
+ .long _sys_getegid
+ .long _sys_setreuid
+ .long _sys_setregid
+ .long _sys_getgroups /* 205 */
+ .long _sys_setgroups
+ .long _sys_fchown
+ .long _sys_setresuid
+ .long _sys_getresuid
+ .long _sys_setresgid /* 210 */
+ .long _sys_getresgid
+ .long _sys_lchown
+ .long _sys_setuid
+ .long _sys_setgid
+ .long _sys_setfsuid /* 215 */
+ .long _sys_setfsgid
+ .long _sys_pivot_root
+ .long _sys_ni_syscall /* sys_mincore */
+ .long _sys_ni_syscall /* sys_madvise */
+ .long _sys_getdents64 /* 220 */
+ .long _sys_fcntl64
+ .long _sys_ni_syscall /* reserved for TUX */
+ .long _sys_ni_syscall
+ .long _sys_gettid
+ .long _sys_ni_syscall /* 225 */ /* sys_readahead */
+ .long _sys_setxattr
+ .long _sys_lsetxattr
+ .long _sys_fsetxattr
+ .long _sys_getxattr
+ .long _sys_lgetxattr /* 230 */
+ .long _sys_fgetxattr
+ .long _sys_listxattr
+ .long _sys_llistxattr
+ .long _sys_flistxattr
+ .long _sys_removexattr /* 235 */
+ .long _sys_lremovexattr
+ .long _sys_fremovexattr
+ .long _sys_tkill
+ .long _sys_sendfile64
+ .long _sys_futex /* 240 */
+ .long _sys_sched_setaffinity
+ .long _sys_sched_getaffinity
+ .long _sys_ni_syscall /* sys_set_thread_area */
+ .long _sys_ni_syscall /* sys_get_thread_area */
+ .long _sys_io_setup /* 245 */
+ .long _sys_io_destroy
+ .long _sys_io_getevents
+ .long _sys_io_submit
+ .long _sys_io_cancel
+ .long _sys_ni_syscall /* 250 */ /* sys_alloc_hugepages */
+ .long _sys_ni_syscall /* sys_freec_hugepages */
+ .long _sys_exit_group
+ .long _sys_lookup_dcookie
+ .long _sys_bfin_spinlock
+ .long _sys_epoll_create /* 255 */
+ .long _sys_epoll_ctl
+ .long _sys_epoll_wait
+ .long _sys_ni_syscall /* remap_file_pages */
+ .long _sys_set_tid_address
+ .long _sys_timer_create /* 260 */
+ .long _sys_timer_settime
+ .long _sys_timer_gettime
+ .long _sys_timer_getoverrun
+ .long _sys_timer_delete
+ .long _sys_clock_settime /* 265 */
+ .long _sys_clock_gettime
+ .long _sys_clock_getres
+ .long _sys_clock_nanosleep
+ .long _sys_statfs64
+ .long _sys_fstatfs64 /* 270 */
+ .long _sys_tgkill
+ .long _sys_utimes
+ .long _sys_fadvise64_64
+ .long _sys_ni_syscall /* vserver */
+ .long _sys_ni_syscall /* 275, mbind */
+ .long _sys_ni_syscall /* get_mempolicy */
+ .long _sys_ni_syscall /* set_mempolicy */
+ .long _sys_mq_open
+ .long _sys_mq_unlink
+ .long _sys_mq_timedsend /* 280 */
+ .long _sys_mq_timedreceive
+ .long _sys_mq_notify
+ .long _sys_mq_getsetattr
+ .long _sys_ni_syscall /* kexec_load */
+ .long _sys_waitid /* 285 */
+ .long _sys_add_key
+ .long _sys_request_key
+ .long _sys_keyctl
+ .long _sys_ioprio_set
+ .long _sys_ioprio_get /* 290 */
+ .long _sys_inotify_init
+ .long _sys_inotify_add_watch
+ .long _sys_inotify_rm_watch
+ .long _sys_ni_syscall /* migrate_pages */
+ .long _sys_openat /* 295 */
+ .long _sys_mkdirat
+ .long _sys_mknodat
+ .long _sys_fchownat
+ .long _sys_futimesat
+ .long _sys_fstatat64 /* 300 */
+ .long _sys_unlinkat
+ .long _sys_renameat
+ .long _sys_linkat
+ .long _sys_symlinkat
+ .long _sys_readlinkat /* 305 */
+ .long _sys_fchmodat
+ .long _sys_faccessat
+ .long _sys_pselect6
+ .long _sys_ppoll
+ .long _sys_unshare /* 310 */
+ .long _sys_sram_alloc
+ .long _sys_sram_free
+ .long _sys_dma_memcpy
+ .long _sys_accept
+ .long _sys_bind /* 315 */
+ .long _sys_connect
+ .long _sys_getpeername
+ .long _sys_getsockname
+ .long _sys_getsockopt
+ .long _sys_listen /* 320 */
+ .long _sys_recv
+ .long _sys_recvfrom
+ .long _sys_recvmsg
+ .long _sys_send
+ .long _sys_sendmsg /* 325 */
+ .long _sys_sendto
+ .long _sys_setsockopt
+ .long _sys_shutdown
+ .long _sys_socket
+ .long _sys_socketpair /* 330 */
+ .long _sys_semctl
+ .long _sys_semget
+ .long _sys_semop
+ .long _sys_msgctl
+ .long _sys_msgget /* 335 */
+ .long _sys_msgrcv
+ .long _sys_msgsnd
+ .long _sys_shmat
+ .long _sys_shmctl
+ .long _sys_shmdt /* 340 */
+ .long _sys_shmget
+ .rept NR_syscalls-(.-_sys_call_table)/4
+ .long _sys_ni_syscall
+ .endr
+_excpt_saved_imask:
+ .long 0;
+
+_exception_stack:
+ .rept 1024
+ .long 0;
+ .endr
+_exception_stack_top:
+
+#if defined(ANOMALY_05000261)
+/* Used by the assembly entry point to work around an anomaly. */
+_last_cplb_fault_retx:
+ .long 0;
+#endif
+/*
+ * Single instructions can have multiple faults, which need to be
+ * handled by traps.c, in irq5. We store the exception cause to ensure
+ * we don't miss a double fault condition
+ */
+ENTRY(_in_ptr_excause)
+ .long 0;
+ENTRY(_out_ptr_excause)
+ .long 0;
+ALIGN
+ENTRY(_excause_circ_buf)
+ .rept 4
+ .long 0
+ .endr
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
new file mode 100644
index 000000000000..dd45664f0d02
--- /dev/null
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -0,0 +1,253 @@
+/*
+ * File: arch/blackfin/mach-common/interrupt.S
+ * Based on:
+ * Author: D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>
+ * Kenneth Albanowski <kjahds@kjahds.com>
+ *
+ * Created: ?
+ * Description: Interrupt Entries
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <asm/blackfin.h>
+#include <asm/mach/irq.h>
+#include <linux/autoconf.h>
+#include <linux/linkage.h>
+#include <asm/entry.h>
+#include <asm/asm-offsets.h>
+
+#include <asm/mach-common/context.S>
+
+#ifdef CONFIG_I_ENTRY_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 4 /* just in case */
+
+/*
+ * initial interrupt handlers
+ */
+
+#ifndef CONFIG_KGDB
+ /* interrupt routine for emulation - 0 */
+ /* Currently used only if GDB stub is not in - invalid */
+ /* gdb-stub set the evt itself */
+ /* save registers for post-mortem only */
+ENTRY(_evt_emulation)
+ SAVE_ALL_SYS
+#ifdef CONFIG_FRAME_POINTER
+ fp = 0;
+#endif
+ r0 = IRQ_EMU;
+ r1 = sp;
+ SP += -12;
+ call _irq_panic;
+ SP += 12;
+ /* - GDB stub fills this in by itself (if defined) */
+ rte;
+#endif
+
+/* Common interrupt entry code. First we do CLI, then push
+ * RETI, to keep interrupts disabled, but to allow this state to be changed
+ * by local_bh_enable.
+ * R0 contains the interrupt number, while R1 may contain the value of IPEND,
+ * or garbage if IPEND won't be needed by the ISR. */
+__common_int_entry:
+ [--sp] = fp;
+ [--sp] = usp;
+
+ [--sp] = i0;
+ [--sp] = i1;
+ [--sp] = i2;
+ [--sp] = i3;
+
+ [--sp] = m0;
+ [--sp] = m1;
+ [--sp] = m2;
+ [--sp] = m3;
+
+ [--sp] = l0;
+ [--sp] = l1;
+ [--sp] = l2;
+ [--sp] = l3;
+
+ [--sp] = b0;
+ [--sp] = b1;
+ [--sp] = b2;
+ [--sp] = b3;
+ [--sp] = a0.x;
+ [--sp] = a0.w;
+ [--sp] = a1.x;
+ [--sp] = a1.w;
+
+ [--sp] = LC0;
+ [--sp] = LC1;
+ [--sp] = LT0;
+ [--sp] = LT1;
+ [--sp] = LB0;
+ [--sp] = LB1;
+
+ [--sp] = ASTAT;
+
+ [--sp] = r0; /* Skip reserved */
+ [--sp] = RETS;
+ r2 = RETI;
+ [--sp] = r2;
+ [--sp] = RETX;
+ [--sp] = RETN;
+ [--sp] = RETE;
+ [--sp] = SEQSTAT;
+ [--sp] = r1; /* IPEND - R1 may or may not be set up before jumping here. */
+
+ /* Switch to other method of keeping interrupts disabled. */
+#ifdef CONFIG_DEBUG_HWERR
+ r1 = 0x3f;
+ sti r1;
+#else
+ cli r1;
+#endif
+ [--sp] = RETI; /* orig_pc */
+ /* Clear all L registers. */
+ r1 = 0 (x);
+ l0 = r1;
+ l1 = r1;
+ l2 = r1;
+ l3 = r1;
+#ifdef CONFIG_FRAME_POINTER
+ fp = 0;
+#endif
+
+#ifdef ANOMALY_05000283
+ cc = r7 == r7;
+ p5.h = 0xffc0;
+ p5.l = 0x0014;
+ if cc jump 1f;
+ r7.l = W[p5];
+1:
+#endif
+ r1 = sp;
+ SP += -12;
+ call _do_irq;
+ SP += 12;
+ call _return_from_int;
+.Lcommon_restore_context:
+ RESTORE_CONTEXT
+ rti;
+
+/* interrupt routine for ivhw - 5 */
+ENTRY(_evt_ivhw)
+ SAVE_CONTEXT
+#ifdef CONFIG_FRAME_POINTER
+ fp = 0;
+#endif
+#ifdef ANOMALY_05000283
+ cc = r7 == r7;
+ p5.h = 0xffc0;
+ p5.l = 0x0014;
+ if cc jump 1f;
+ r7.l = W[p5];
+1:
+#endif
+ p0.l = lo(TBUFCTL);
+ p0.h = hi(TBUFCTL);
+ r0 = 1;
+ [p0] = r0;
+ r0 = IRQ_HWERR;
+ r1 = sp;
+
+#ifdef CONFIG_HARDWARE_PM
+ r7 = SEQSTAT;
+ r7 = r7 >>> 0xe;
+ r6 = 0x1F;
+ r7 = r7 & r6;
+ r5 = 0x12;
+ cc = r7 == r5;
+ if cc jump .Lcall_do_ovf; /* deal with performance counter overflow */
+#endif
+
+ SP += -12;
+ call _irq_panic;
+ SP += 12;
+ rti;
+#ifdef CONFIG_HARDWARE_PM
+.Lcall_do_ovf:
+
+ SP += -12;
+ call _pm_overflow;
+ SP += 12;
+
+ jump .Lcommon_restore_context;
+#endif
+
+/* interrupt routine for evt2 - 2. This is NMI. */
+ENTRY(_evt_evt2)
+ SAVE_CONTEXT
+#ifdef CONFIG_FRAME_POINTER
+ fp = 0;
+#endif
+#ifdef ANOMALY_05000283
+ cc = r7 == r7;
+ p5.h = 0xffc0;
+ p5.l = 0x0014;
+ if cc jump 1f;
+ r7.l = W[p5];
+1:
+#endif
+ r0 = IRQ_NMI;
+ r1 = sp;
+ SP += -12;
+ call _asm_do_IRQ;
+ SP += 12;
+ RESTORE_CONTEXT
+ rtn;
+
+/* interrupt routine for core timer - 6 */
+ENTRY(_evt_timer)
+ TIMER_INTERRUPT_ENTRY(EVT_IVTMR_P)
+
+/* interrupt routine for evt7 - 7 */
+ENTRY(_evt_evt7)
+ INTERRUPT_ENTRY(EVT_IVG7_P)
+ENTRY(_evt_evt8)
+ INTERRUPT_ENTRY(EVT_IVG8_P)
+ENTRY(_evt_evt9)
+ INTERRUPT_ENTRY(EVT_IVG9_P)
+ENTRY(_evt_evt10)
+ INTERRUPT_ENTRY(EVT_IVG10_P)
+ENTRY(_evt_evt11)
+ INTERRUPT_ENTRY(EVT_IVG11_P)
+ENTRY(_evt_evt12)
+ INTERRUPT_ENTRY(EVT_IVG12_P)
+ENTRY(_evt_evt13)
+ INTERRUPT_ENTRY(EVT_IVG13_P)
+
+
+ /* interrupt routine for system_call - 15 */
+ENTRY(_evt_system_call)
+ SAVE_CONTEXT_SYSCALL
+#ifdef CONFIG_FRAME_POINTER
+ fp = 0;
+#endif
+ call _system_call;
+ jump .Lcommon_restore_context;
diff --git a/arch/blackfin/mach-common/ints-priority-dc.c b/arch/blackfin/mach-common/ints-priority-dc.c
new file mode 100644
index 000000000000..f3cf07036c2a
--- /dev/null
+++ b/arch/blackfin/mach-common/ints-priority-dc.c
@@ -0,0 +1,476 @@
+/*
+ * File: arch/blackfin/mach-common/ints-priority-dc.c
+ * Based on:
+ * Author:
+ *
+ * Created: ?
+ * Description: Set up the interupt priorities
+ *
+ * Modified:
+ * 1996 Roman Zippel
+ * 1999 D. Jeff Dionne <jeff@uclinux.org>
+ * 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
+ * 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
+ * 2003 Metrowerks/Motorola
+ * 2003 Bas Vermeulen <bas@buyways.nl>
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel_stat.h>
+#include <linux/seq_file.h>
+#include <linux/irq.h>
+#ifdef CONFIG_KGDB
+#include <linux/kgdb.h>
+#endif
+#include <asm/traps.h>
+#include <asm/blackfin.h>
+#include <asm/gpio.h>
+#include <asm/irq_handler.h>
+
+/*
+ * NOTES:
+ * - we have separated the physical Hardware interrupt from the
+ * levels that the LINUX kernel sees (see the description in irq.h)
+ * -
+ */
+
+unsigned long irq_flags = 0;
+
+/* The number of spurious interrupts */
+atomic_t num_spurious;
+
+struct ivgx {
+ /* irq number for request_irq, available in mach-bf561/irq.h */
+ int irqno;
+ /* corresponding bit in the SICA_ISR0 register */
+ int isrflag0;
+ /* corresponding bit in the SICA_ISR1 register */
+ int isrflag1;
+} ivg_table[NR_PERI_INTS];
+
+struct ivg_slice {
+ /* position of first irq in ivg_table for given ivg */
+ struct ivgx *ifirst;
+ struct ivgx *istop;
+} ivg7_13[IVG13 - IVG7 + 1];
+
+static void search_IAR(void);
+
+/*
+ * Search SIC_IAR and fill tables with the irqvalues
+ * and their positions in the SIC_ISR register.
+ */
+static void __init search_IAR(void)
+{
+ unsigned ivg, irq_pos = 0;
+ for (ivg = 0; ivg <= IVG13 - IVG7; ivg++) {
+ int irqn;
+
+ ivg7_13[ivg].istop = ivg7_13[ivg].ifirst = &ivg_table[irq_pos];
+
+ for (irqn = 0; irqn < NR_PERI_INTS; irqn++) {
+ int iar_shift = (irqn & 7) * 4;
+ if (ivg ==
+ (0xf &
+ bfin_read32((unsigned long *)SICA_IAR0 +
+ (irqn >> 3)) >> iar_shift)) {
+ ivg_table[irq_pos].irqno = IVG7 + irqn;
+ ivg_table[irq_pos].isrflag0 =
+ (irqn < 32 ? (1 << irqn) : 0);
+ ivg_table[irq_pos].isrflag1 =
+ (irqn < 32 ? 0 : (1 << (irqn - 32)));
+ ivg7_13[ivg].istop++;
+ irq_pos++;
+ }
+ }
+ }
+}
+
+/*
+ * This is for BF561 internal IRQs
+ */
+
+static void ack_noop(unsigned int irq)
+{
+ /* Dummy function. */
+}
+
+static void bf561_core_mask_irq(unsigned int irq)
+{
+ irq_flags &= ~(1 << irq);
+ if (!irqs_disabled())
+ local_irq_enable();
+}
+
+static void bf561_core_unmask_irq(unsigned int irq)
+{
+ irq_flags |= 1 << irq;
+ /*
+ * If interrupts are enabled, IMASK must contain the same value
+ * as irq_flags. Make sure that invariant holds. If interrupts
+ * are currently disabled we need not do anything; one of the
+ * callers will take care of setting IMASK to the proper value
+ * when reenabling interrupts.
+ * local_irq_enable just does "STI irq_flags", so it's exactly
+ * what we need.
+ */
+ if (!irqs_disabled())
+ local_irq_enable();
+ return;
+}
+
+static void bf561_internal_mask_irq(unsigned int irq)
+{
+ unsigned long irq_mask;
+ if ((irq - (IRQ_CORETMR + 1)) < 32) {
+ irq_mask = (1 << (irq - (IRQ_CORETMR + 1)));
+ bfin_write_SICA_IMASK0(bfin_read_SICA_IMASK0() & ~irq_mask);
+ } else {
+ irq_mask = (1 << (irq - (IRQ_CORETMR + 1) - 32));
+ bfin_write_SICA_IMASK1(bfin_read_SICA_IMASK1() & ~irq_mask);
+ }
+}
+
+static void bf561_internal_unmask_irq(unsigned int irq)
+{
+ unsigned long irq_mask;
+
+ if ((irq - (IRQ_CORETMR + 1)) < 32) {
+ irq_mask = (1 << (irq - (IRQ_CORETMR + 1)));
+ bfin_write_SICA_IMASK0(bfin_read_SICA_IMASK0() | irq_mask);
+ } else {
+ irq_mask = (1 << (irq - (IRQ_CORETMR + 1) - 32));
+ bfin_write_SICA_IMASK1(bfin_read_SICA_IMASK1() | irq_mask);
+ }
+ SSYNC();
+}
+
+static struct irq_chip bf561_core_irqchip = {
+ .ack = ack_noop,
+ .mask = bf561_core_mask_irq,
+ .unmask = bf561_core_unmask_irq,
+};
+
+static struct irq_chip bf561_internal_irqchip = {
+ .ack = ack_noop,
+ .mask = bf561_internal_mask_irq,
+ .unmask = bf561_internal_unmask_irq,
+};
+
+#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
+static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)];
+
+static void bf561_gpio_ack_irq(unsigned int irq)
+{
+ u16 gpionr = irq - IRQ_PF0;
+
+ if(gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
+ set_gpio_data(gpionr, 0);
+ SSYNC();
+ }
+}
+
+static void bf561_gpio_mask_ack_irq(unsigned int irq)
+{
+ u16 gpionr = irq - IRQ_PF0;
+
+ if(gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
+ set_gpio_data(gpionr, 0);
+ SSYNC();
+ }
+
+ set_gpio_maska(gpionr, 0);
+ SSYNC();
+}
+
+static void bf561_gpio_mask_irq(unsigned int irq)
+{
+ set_gpio_maska(irq - IRQ_PF0, 0);
+ SSYNC();
+}
+
+static void bf561_gpio_unmask_irq(unsigned int irq)
+{
+ set_gpio_maska(irq - IRQ_PF0, 1);
+ SSYNC();
+}
+
+static unsigned int bf561_gpio_irq_startup(unsigned int irq)
+{
+ unsigned int ret;
+ u16 gpionr = irq - IRQ_PF0;
+
+ if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
+
+ ret = gpio_request(gpionr, NULL);
+ if(ret)
+ return ret;
+
+ }
+
+ gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
+ bf561_gpio_unmask_irq(irq);
+
+ return ret;
+
+}
+
+static void bf561_gpio_irq_shutdown(unsigned int irq)
+{
+ bf561_gpio_mask_irq(irq);
+ gpio_free(irq - IRQ_PF0);
+ gpio_enabled[gpio_bank(irq - IRQ_PF0)] &= ~gpio_bit(irq - IRQ_PF0);
+}
+
+static int bf561_gpio_irq_type(unsigned int irq, unsigned int type)
+{
+
+ unsigned int ret;
+ u16 gpionr = irq - IRQ_PF0;
+
+
+ if (type == IRQ_TYPE_PROBE) {
+ /* only probe unenabled GPIO interrupt lines */
+ if (gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))
+ return 0;
+ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+
+ }
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
+ IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
+
+ if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
+
+ ret = gpio_request(gpionr, NULL);
+ if(ret)
+ return ret;
+
+ }
+
+ gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
+ } else {
+ gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
+ return 0;
+ }
+
+
+ set_gpio_dir(gpionr, 0);
+ set_gpio_inen(gpionr, 1);
+
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
+ gpio_edge_triggered[gpio_bank(gpionr)] |= gpio_bit(gpionr);
+ set_gpio_edge(gpionr, 1);
+ } else {
+ set_gpio_edge(gpionr, 0);
+ gpio_edge_triggered[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
+ }
+
+ if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+ == (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+ set_gpio_both(gpionr, 1);
+ else
+ set_gpio_both(gpionr, 0);
+
+ if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)))
+ set_gpio_polar(gpionr, 1); /* low or falling edge denoted by one */
+ else
+ set_gpio_polar(gpionr, 0); /* high or rising edge denoted by zero */
+
+ SSYNC();
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+ set_irq_handler(irq, handle_edge_irq);
+ else
+ set_irq_handler(irq, handle_level_irq);
+
+ return 0;
+}
+
+static struct irq_chip bf561_gpio_irqchip = {
+ .ack = bf561_gpio_ack_irq,
+ .mask = bf561_gpio_mask_irq,
+ .mask_ack = bf561_gpio_mask_ack_irq,
+ .unmask = bf561_gpio_unmask_irq,
+ .set_type = bf561_gpio_irq_type,
+ .startup = bf561_gpio_irq_startup,
+ .shutdown = bf561_gpio_irq_shutdown
+};
+
+static void bf561_demux_gpio_irq(unsigned int inta_irq,
+ struct irq_desc *intb_desc)
+{
+ int irq, flag_d, mask;
+ u16 gpio;
+
+ switch (inta_irq) {
+ case IRQ_PROG0_INTA:
+ irq = IRQ_PF0;
+ break;
+ case IRQ_PROG1_INTA:
+ irq = IRQ_PF16;
+ break;
+ case IRQ_PROG2_INTA:
+ irq = IRQ_PF32;
+ break;
+ default:
+ dump_stack();
+ return;
+ }
+
+ gpio = irq - IRQ_PF0;
+
+ flag_d = get_gpiop_data(gpio);
+ mask = flag_d & (gpio_enabled[gpio_bank(gpio)] &
+ get_gpiop_maska(gpio));
+
+ do {
+ if (mask & 1) {
+ struct irq_desc *desc = irq_desc + irq;
+ desc->handle_irq(irq, desc);
+ }
+ irq++;
+ mask >>= 1;
+ } while (mask);
+
+
+}
+
+#endif /* CONFIG_IRQCHIP_DEMUX_GPIO */
+
+/*
+ * This function should be called during kernel startup to initialize
+ * the BFin IRQ handling routines.
+ */
+int __init init_arch_irq(void)
+{
+ int irq;
+ unsigned long ilat = 0;
+ /* Disable all the peripheral intrs - page 4-29 HW Ref manual */
+ bfin_write_SICA_IMASK0(SIC_UNMASK_ALL);
+ bfin_write_SICA_IMASK1(SIC_UNMASK_ALL);
+ SSYNC();
+
+ local_irq_disable();
+
+ init_exception_buff();
+
+#ifndef CONFIG_KGDB
+ bfin_write_EVT0(evt_emulation);
+#endif
+ bfin_write_EVT2(evt_evt2);
+ bfin_write_EVT3(trap);
+ bfin_write_EVT5(evt_ivhw);
+ bfin_write_EVT6(evt_timer);
+ bfin_write_EVT7(evt_evt7);
+ bfin_write_EVT8(evt_evt8);
+ bfin_write_EVT9(evt_evt9);
+ bfin_write_EVT10(evt_evt10);
+ bfin_write_EVT11(evt_evt11);
+ bfin_write_EVT12(evt_evt12);
+ bfin_write_EVT13(evt_evt13);
+ bfin_write_EVT14(evt14_softirq);
+ bfin_write_EVT15(evt_system_call);
+ CSYNC();
+
+ for (irq = 0; irq < SYS_IRQS; irq++) {
+ if (irq <= IRQ_CORETMR)
+ set_irq_chip(irq, &bf561_core_irqchip);
+ else
+ set_irq_chip(irq, &bf561_internal_irqchip);
+#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+ if ((irq != IRQ_PROG0_INTA) &&
+ (irq != IRQ_PROG1_INTA) && (irq != IRQ_PROG2_INTA)) {
+#endif
+ set_irq_handler(irq, handle_simple_irq);
+#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+ } else {
+ set_irq_chained_handler(irq, bf561_demux_gpio_irq);
+ }
+#endif
+
+ }
+
+#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+ for (irq = IRQ_PF0; irq <= IRQ_PF47; irq++) {
+ set_irq_chip(irq, &bf561_gpio_irqchip);
+ /* if configured as edge, then will be changed to do_edge_IRQ */
+ set_irq_handler(irq, handle_level_irq);
+ }
+#endif
+ bfin_write_IMASK(0);
+ CSYNC();
+ ilat = bfin_read_ILAT();
+ CSYNC();
+ bfin_write_ILAT(ilat);
+ CSYNC();
+
+ printk(KERN_INFO "Configuring Blackfin Priority Driven Interrupts\n");
+ /* IMASK=xxx is equivalent to STI xx or irq_flags=xx,
+ * local_irq_enable()
+ */
+ program_IAR();
+ /* Therefore it's better to setup IARs before interrupts enabled */
+ search_IAR();
+
+ /* Enable interrupts IVG7-15 */
+ irq_flags = irq_flags | IMASK_IVG15 |
+ IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
+ IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
+
+ return 0;
+}
+
+#ifdef CONFIG_DO_IRQ_L1
+void do_irq(int vec, struct pt_regs *fp)__attribute__((l1_text));
+#endif
+
+void do_irq(int vec, struct pt_regs *fp)
+{
+ if (vec == EVT_IVTMR_P) {
+ vec = IRQ_CORETMR;
+ } else {
+ struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst;
+ struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop;
+ unsigned long sic_status0, sic_status1;
+
+ SSYNC();
+ sic_status0 = bfin_read_SICA_IMASK0() & bfin_read_SICA_ISR0();
+ sic_status1 = bfin_read_SICA_IMASK1() & bfin_read_SICA_ISR1();
+
+ for (;; ivg++) {
+ if (ivg >= ivg_stop) {
+ atomic_inc(&num_spurious);
+ return;
+ } else if ((sic_status0 & ivg->isrflag0) ||
+ (sic_status1 & ivg->isrflag1))
+ break;
+ }
+ vec = ivg->irqno;
+ }
+ asm_do_IRQ(vec, fp);
+
+#ifdef CONFIG_KGDB
+ kgdb_process_breakpoint();
+#endif
+}
diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c
new file mode 100644
index 000000000000..34b62288ec3c
--- /dev/null
+++ b/arch/blackfin/mach-common/ints-priority-sc.c
@@ -0,0 +1,577 @@
+/*
+ * File: arch/blackfin/mach-common/ints-priority-sc.c
+ * Based on:
+ * Author:
+ *
+ * Created: ?
+ * Description: Set up the interupt priorities
+ *
+ * Modified:
+ * 1996 Roman Zippel
+ * 1999 D. Jeff Dionne <jeff@uclinux.org>
+ * 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
+ * 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
+ * 2003 Metrowerks/Motorola
+ * 2003 Bas Vermeulen <bas@buyways.nl>
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel_stat.h>
+#include <linux/seq_file.h>
+#include <linux/irq.h>
+#ifdef CONFIG_KGDB
+#include <linux/kgdb.h>
+#endif
+#include <asm/traps.h>
+#include <asm/blackfin.h>
+#include <asm/gpio.h>
+#include <asm/irq_handler.h>
+
+#ifdef BF537_FAMILY
+# define BF537_GENERIC_ERROR_INT_DEMUX
+#else
+# undef BF537_GENERIC_ERROR_INT_DEMUX
+#endif
+
+/*
+ * NOTES:
+ * - we have separated the physical Hardware interrupt from the
+ * levels that the LINUX kernel sees (see the description in irq.h)
+ * -
+ */
+
+unsigned long irq_flags = 0;
+
+/* The number of spurious interrupts */
+atomic_t num_spurious;
+
+struct ivgx {
+ /* irq number for request_irq, available in mach-bf533/irq.h */
+ int irqno;
+ /* corresponding bit in the SIC_ISR register */
+ int isrflag;
+} ivg_table[NR_PERI_INTS];
+
+struct ivg_slice {
+ /* position of first irq in ivg_table for given ivg */
+ struct ivgx *ifirst;
+ struct ivgx *istop;
+} ivg7_13[IVG13 - IVG7 + 1];
+
+static void search_IAR(void);
+
+/*
+ * Search SIC_IAR and fill tables with the irqvalues
+ * and their positions in the SIC_ISR register.
+ */
+static void __init search_IAR(void)
+{
+ unsigned ivg, irq_pos = 0;
+ for (ivg = 0; ivg <= IVG13 - IVG7; ivg++) {
+ int irqn;
+
+ ivg7_13[ivg].istop = ivg7_13[ivg].ifirst =
+ &ivg_table[irq_pos];
+
+ for (irqn = 0; irqn < NR_PERI_INTS; irqn++) {
+ int iar_shift = (irqn & 7) * 4;
+ if (ivg ==
+ (0xf &
+ bfin_read32((unsigned long *) SIC_IAR0 +
+ (irqn >> 3)) >> iar_shift)) {
+ ivg_table[irq_pos].irqno = IVG7 + irqn;
+ ivg_table[irq_pos].isrflag = 1 << irqn;
+ ivg7_13[ivg].istop++;
+ irq_pos++;
+ }
+ }
+ }
+}
+
+/*
+ * This is for BF533 internal IRQs
+ */
+
+static void ack_noop(unsigned int irq)
+{
+ /* Dummy function. */
+}
+
+static void bfin_core_mask_irq(unsigned int irq)
+{
+ irq_flags &= ~(1 << irq);
+ if (!irqs_disabled())
+ local_irq_enable();
+}
+
+static void bfin_core_unmask_irq(unsigned int irq)
+{
+ irq_flags |= 1 << irq;
+ /*
+ * If interrupts are enabled, IMASK must contain the same value
+ * as irq_flags. Make sure that invariant holds. If interrupts
+ * are currently disabled we need not do anything; one of the
+ * callers will take care of setting IMASK to the proper value
+ * when reenabling interrupts.
+ * local_irq_enable just does "STI irq_flags", so it's exactly
+ * what we need.
+ */
+ if (!irqs_disabled())
+ local_irq_enable();
+ return;
+}
+
+static void bfin_internal_mask_irq(unsigned int irq)
+{
+ bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
+ ~(1 << (irq - (IRQ_CORETMR + 1))));
+ SSYNC();
+}
+
+static void bfin_internal_unmask_irq(unsigned int irq)
+{
+ bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
+ (1 << (irq - (IRQ_CORETMR + 1))));
+ SSYNC();
+}
+
+static struct irq_chip bfin_core_irqchip = {
+ .ack = ack_noop,
+ .mask = bfin_core_mask_irq,
+ .unmask = bfin_core_unmask_irq,
+};
+
+static struct irq_chip bfin_internal_irqchip = {
+ .ack = ack_noop,
+ .mask = bfin_internal_mask_irq,
+ .unmask = bfin_internal_unmask_irq,
+};
+
+#ifdef BF537_GENERIC_ERROR_INT_DEMUX
+static int error_int_mask;
+
+static void bfin_generic_error_ack_irq(unsigned int irq)
+{
+
+}
+
+static void bfin_generic_error_mask_irq(unsigned int irq)
+{
+ error_int_mask &= ~(1L << (irq - IRQ_PPI_ERROR));
+
+ if (!error_int_mask) {
+ local_irq_disable();
+ bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
+ ~(1 <<
+ (IRQ_GENERIC_ERROR -
+ (IRQ_CORETMR + 1))));
+ SSYNC();
+ local_irq_enable();
+ }
+}
+
+static void bfin_generic_error_unmask_irq(unsigned int irq)
+{
+ local_irq_disable();
+ bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | 1 <<
+ (IRQ_GENERIC_ERROR - (IRQ_CORETMR + 1)));
+ SSYNC();
+ local_irq_enable();
+
+ error_int_mask |= 1L << (irq - IRQ_PPI_ERROR);
+}
+
+static struct irq_chip bfin_generic_error_irqchip = {
+ .ack = bfin_generic_error_ack_irq,
+ .mask = bfin_generic_error_mask_irq,
+ .unmask = bfin_generic_error_unmask_irq,
+};
+
+static void bfin_demux_error_irq(unsigned int int_err_irq,
+ struct irq_desc *intb_desc)
+{
+ int irq = 0;
+
+ SSYNC();
+
+#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
+ if (bfin_read_EMAC_SYSTAT() & EMAC_ERR_MASK)
+ irq = IRQ_MAC_ERROR;
+ else
+#endif
+ if (bfin_read_SPORT0_STAT() & SPORT_ERR_MASK)
+ irq = IRQ_SPORT0_ERROR;
+ else if (bfin_read_SPORT1_STAT() & SPORT_ERR_MASK)
+ irq = IRQ_SPORT1_ERROR;
+ else if (bfin_read_PPI_STATUS() & PPI_ERR_MASK)
+ irq = IRQ_PPI_ERROR;
+ else if (bfin_read_CAN_GIF() & CAN_ERR_MASK)
+ irq = IRQ_CAN_ERROR;
+ else if (bfin_read_SPI_STAT() & SPI_ERR_MASK)
+ irq = IRQ_SPI_ERROR;
+ else if ((bfin_read_UART0_IIR() & UART_ERR_MASK_STAT1) &&
+ (bfin_read_UART0_IIR() & UART_ERR_MASK_STAT0))
+ irq = IRQ_UART0_ERROR;
+ else if ((bfin_read_UART1_IIR() & UART_ERR_MASK_STAT1) &&
+ (bfin_read_UART1_IIR() & UART_ERR_MASK_STAT0))
+ irq = IRQ_UART1_ERROR;
+
+ if (irq) {
+ if (error_int_mask & (1L << (irq - IRQ_PPI_ERROR))) {
+ struct irq_desc *desc = irq_desc + irq;
+ desc->handle_irq(irq, desc);
+ } else {
+
+ switch (irq) {
+ case IRQ_PPI_ERROR:
+ bfin_write_PPI_STATUS(PPI_ERR_MASK);
+ break;
+#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
+ case IRQ_MAC_ERROR:
+ bfin_write_EMAC_SYSTAT(EMAC_ERR_MASK);
+ break;
+#endif
+ case IRQ_SPORT0_ERROR:
+ bfin_write_SPORT0_STAT(SPORT_ERR_MASK);
+ break;
+
+ case IRQ_SPORT1_ERROR:
+ bfin_write_SPORT1_STAT(SPORT_ERR_MASK);
+ break;
+
+ case IRQ_CAN_ERROR:
+ bfin_write_CAN_GIS(CAN_ERR_MASK);
+ break;
+
+ case IRQ_SPI_ERROR:
+ bfin_write_SPI_STAT(SPI_ERR_MASK);
+ break;
+
+ default:
+ break;
+ }
+
+ pr_debug("IRQ %d:"
+ " MASKED PERIPHERAL ERROR INTERRUPT ASSERTED\n",
+ irq);
+ }
+ } else
+ printk(KERN_ERR
+ "%s : %s : LINE %d :\nIRQ ?: PERIPHERAL ERROR"
+ " INTERRUPT ASSERTED BUT NO SOURCE FOUND\n",
+ __FUNCTION__, __FILE__, __LINE__);
+
+
+}
+#endif /* BF537_GENERIC_ERROR_INT_DEMUX */
+
+#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+
+static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
+static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)];
+
+static void bfin_gpio_ack_irq(unsigned int irq)
+{
+ u16 gpionr = irq - IRQ_PF0;
+
+ if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
+ set_gpio_data(gpionr, 0);
+ SSYNC();
+ }
+}
+
+static void bfin_gpio_mask_ack_irq(unsigned int irq)
+{
+ u16 gpionr = irq - IRQ_PF0;
+
+ if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
+ set_gpio_data(gpionr, 0);
+ SSYNC();
+ }
+
+ set_gpio_maska(gpionr, 0);
+ SSYNC();
+}
+
+static void bfin_gpio_mask_irq(unsigned int irq)
+{
+ set_gpio_maska(irq - IRQ_PF0, 0);
+ SSYNC();
+}
+
+static void bfin_gpio_unmask_irq(unsigned int irq)
+{
+ set_gpio_maska(irq - IRQ_PF0, 1);
+ SSYNC();
+}
+
+static unsigned int bfin_gpio_irq_startup(unsigned int irq)
+{
+ unsigned int ret;
+ u16 gpionr = irq - IRQ_PF0;
+
+ if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
+ ret = gpio_request(gpionr, NULL);
+ if (ret)
+ return ret;
+ }
+
+ gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
+ bfin_gpio_unmask_irq(irq);
+
+ return ret;
+}
+
+static void bfin_gpio_irq_shutdown(unsigned int irq)
+{
+ bfin_gpio_mask_irq(irq);
+ gpio_free(irq - IRQ_PF0);
+ gpio_enabled[gpio_bank(irq - IRQ_PF0)] &= ~gpio_bit(irq - IRQ_PF0);
+}
+
+static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
+{
+
+ unsigned int ret;
+ u16 gpionr = irq - IRQ_PF0;
+
+ if (type == IRQ_TYPE_PROBE) {
+ /* only probe unenabled GPIO interrupt lines */
+ if (gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))
+ return 0;
+ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+ }
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
+ IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+ {
+ if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
+ ret = gpio_request(gpionr, NULL);
+ if (ret)
+ return ret;
+ }
+
+ gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
+ } else {
+ gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
+ return 0;
+ }
+
+ set_gpio_dir(gpionr, 0);
+ set_gpio_inen(gpionr, 1);
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
+ gpio_edge_triggered[gpio_bank(gpionr)] |= gpio_bit(gpionr);
+ set_gpio_edge(gpionr, 1);
+ } else {
+ set_gpio_edge(gpionr, 0);
+ gpio_edge_triggered[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
+ }
+
+ if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+ == (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+ set_gpio_both(gpionr, 1);
+ else
+ set_gpio_both(gpionr, 0);
+
+ if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)))
+ set_gpio_polar(gpionr, 1); /* low or falling edge denoted by one */
+ else
+ set_gpio_polar(gpionr, 0); /* high or rising edge denoted by zero */
+
+ SSYNC();
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+ set_irq_handler(irq, handle_edge_irq);
+ else
+ set_irq_handler(irq, handle_level_irq);
+
+ return 0;
+}
+
+
+static struct irq_chip bfin_gpio_irqchip = {
+ .ack = bfin_gpio_ack_irq,
+ .mask = bfin_gpio_mask_irq,
+ .mask_ack = bfin_gpio_mask_ack_irq,
+ .unmask = bfin_gpio_unmask_irq,
+ .set_type = bfin_gpio_irq_type,
+ .startup = bfin_gpio_irq_startup,
+ .shutdown = bfin_gpio_irq_shutdown
+};
+
+static void bfin_demux_gpio_irq(unsigned int intb_irq,
+ struct irq_desc *intb_desc)
+{
+ u16 i;
+
+ for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=16) {
+ int irq = IRQ_PF0 + i;
+ int flag_d = get_gpiop_data(i);
+ int mask =
+ flag_d & (gpio_enabled[gpio_bank(i)] &
+ get_gpiop_maska(i));
+
+ while (mask) {
+ if (mask & 1) {
+ struct irq_desc *desc = irq_desc + irq;
+ desc->handle_irq(irq, desc);
+ }
+ irq++;
+ mask >>= 1;
+ }
+ }
+}
+
+#endif /* CONFIG_IRQCHIP_DEMUX_GPIO */
+
+/*
+ * This function should be called during kernel startup to initialize
+ * the BFin IRQ handling routines.
+ */
+int __init init_arch_irq(void)
+{
+ int irq;
+ unsigned long ilat = 0;
+ /* Disable all the peripheral intrs - page 4-29 HW Ref manual */
+ bfin_write_SIC_IMASK(SIC_UNMASK_ALL);
+ SSYNC();
+
+ local_irq_disable();
+
+#ifndef CONFIG_KGDB
+ bfin_write_EVT0(evt_emulation);
+#endif
+ bfin_write_EVT2(evt_evt2);
+ bfin_write_EVT3(trap);
+ bfin_write_EVT5(evt_ivhw);
+ bfin_write_EVT6(evt_timer);
+ bfin_write_EVT7(evt_evt7);
+ bfin_write_EVT8(evt_evt8);
+ bfin_write_EVT9(evt_evt9);
+ bfin_write_EVT10(evt_evt10);
+ bfin_write_EVT11(evt_evt11);
+ bfin_write_EVT12(evt_evt12);
+ bfin_write_EVT13(evt_evt13);
+ bfin_write_EVT14(evt14_softirq);
+ bfin_write_EVT15(evt_system_call);
+ CSYNC();
+
+ for (irq = 0; irq < SYS_IRQS; irq++) {
+ if (irq <= IRQ_CORETMR)
+ set_irq_chip(irq, &bfin_core_irqchip);
+ else
+ set_irq_chip(irq, &bfin_internal_irqchip);
+#ifdef BF537_GENERIC_ERROR_INT_DEMUX
+ if (irq != IRQ_GENERIC_ERROR) {
+#endif
+
+#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+ if ((irq != IRQ_PROG_INTA) /*PORT F & G MASK_A Interrupt*/
+# if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
+ && (irq != IRQ_MAC_RX) /*PORT H MASK_A Interrupt*/
+# endif
+ ) {
+#endif
+ set_irq_handler(irq, handle_simple_irq);
+#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+ } else {
+ set_irq_chained_handler(irq,
+ bfin_demux_gpio_irq);
+ }
+#endif
+
+#ifdef BF537_GENERIC_ERROR_INT_DEMUX
+ } else {
+ set_irq_handler(irq, bfin_demux_error_irq);
+ }
+#endif
+ }
+#ifdef BF537_GENERIC_ERROR_INT_DEMUX
+ for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++) {
+ set_irq_chip(irq, &bfin_generic_error_irqchip);
+ set_irq_handler(irq, handle_level_irq);
+ }
+#endif
+
+#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+ for (irq = IRQ_PF0; irq < NR_IRQS; irq++) {
+ set_irq_chip(irq, &bfin_gpio_irqchip);
+ /* if configured as edge, then will be changed to do_edge_IRQ */
+ set_irq_handler(irq, handle_level_irq);
+ }
+#endif
+ bfin_write_IMASK(0);
+ CSYNC();
+ ilat = bfin_read_ILAT();
+ CSYNC();
+ bfin_write_ILAT(ilat);
+ CSYNC();
+
+ printk(KERN_INFO
+ "Configuring Blackfin Priority Driven Interrupts\n");
+ /* IMASK=xxx is equivalent to STI xx or irq_flags=xx,
+ * local_irq_enable()
+ */
+ program_IAR();
+ /* Therefore it's better to setup IARs before interrupts enabled */
+ search_IAR();
+
+ /* Enable interrupts IVG7-15 */
+ irq_flags = irq_flags | IMASK_IVG15 |
+ IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
+ IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 |
+ IMASK_IVGHW;
+
+ return 0;
+}
+
+#ifdef CONFIG_DO_IRQ_L1
+void do_irq(int vec, struct pt_regs *fp)__attribute__((l1_text));
+#endif
+
+void do_irq(int vec, struct pt_regs *fp)
+{
+ if (vec == EVT_IVTMR_P) {
+ vec = IRQ_CORETMR;
+ } else {
+ struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst;
+ struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop;
+ unsigned long sic_status;
+
+ SSYNC();
+ sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR();
+
+ for (;; ivg++) {
+ if (ivg >= ivg_stop) {
+ atomic_inc(&num_spurious);
+ return;
+ } else if (sic_status & ivg->isrflag)
+ break;
+ }
+ vec = ivg->irqno;
+ }
+ asm_do_IRQ(vec, fp);
+
+#ifdef CONFIG_KGDB
+ kgdb_process_breakpoint();
+#endif
+}
diff --git a/arch/blackfin/mach-common/irqpanic.c b/arch/blackfin/mach-common/irqpanic.c
new file mode 100644
index 000000000000..f05e3dadaf33
--- /dev/null
+++ b/arch/blackfin/mach-common/irqpanic.c
@@ -0,0 +1,194 @@
+/*
+ * File: arch/blackfin/mach-common/irqpanic.c
+ * Based on:
+ * Author:
+ *
+ * Created: ?
+ * Description: panic kernel with dump information
+ *
+ * Modified: rgetz - added cache checking code 14Feb06
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel_stat.h>
+#include <linux/sched.h>
+#include <asm/traps.h>
+#include <asm/blackfin.h>
+
+#include "../oprofile/op_blackfin.h"
+
+#ifdef CONFIG_DEBUG_ICACHE_CHECK
+#define L1_ICACHE_START 0xffa10000
+#define L1_ICACHE_END 0xffa13fff
+void irq_panic(int reason, struct pt_regs *regs) __attribute__ ((l1_text));
+#endif
+
+/*
+ * irq_panic - calls panic with string setup
+ */
+asmlinkage void irq_panic(int reason, struct pt_regs *regs)
+{
+ int sig = 0;
+ siginfo_t info;
+
+#ifdef CONFIG_DEBUG_ICACHE_CHECK
+ unsigned int cmd, tag, ca, cache_hi, cache_lo, *pa;
+ unsigned short i, j, die;
+ unsigned int bad[10][6];
+
+ /* check entire cache for coherency
+ * Since printk is in cacheable memory,
+ * don't call it until you have checked everything
+ */
+
+ die = 0;
+ i = 0;
+
+ /* check icache */
+
+ for (ca = L1_ICACHE_START; ca <= L1_ICACHE_END && i < 10; ca += 32) {
+
+ /* Grab various address bits for the itest_cmd fields */
+ cmd = (((ca & 0x3000) << 4) | /* ca[13:12] for SBNK[1:0] */
+ ((ca & 0x0c00) << 16) | /* ca[11:10] for WAYSEL[1:0] */
+ ((ca & 0x3f8)) | /* ca[09:03] for SET[4:0] and DW[1:0] */
+ 0); /* Access Tag, Read access */
+
+ SSYNC();
+ bfin_write_ITEST_COMMAND(cmd);
+ SSYNC();
+ tag = bfin_read_ITEST_DATA0();
+ SSYNC();
+
+ /* if tag is marked as valid, check it */
+ if (tag & 1) {
+ /* The icache is arranged in 4 groups of 64-bits */
+ for (j = 0; j < 32; j += 8) {
+ cmd = ((((ca + j) & 0x3000) << 4) | /* ca[13:12] for SBNK[1:0] */
+ (((ca + j) & 0x0c00) << 16) | /* ca[11:10] for WAYSEL[1:0] */
+ (((ca + j) & 0x3f8)) | /* ca[09:03] for SET[4:0] and DW[1:0] */
+ 4); /* Access Data, Read access */
+
+ SSYNC();
+ bfin_write_ITEST_COMMAND(cmd);
+ SSYNC();
+
+ cache_hi = bfin_read_ITEST_DATA1();
+ cache_lo = bfin_read_ITEST_DATA0();
+
+ pa = ((unsigned int *)((tag & 0xffffcc00) |
+ ((ca + j) & ~(0xffffcc00))));
+
+ /*
+ * Debugging this, enable
+ *
+ * printk("addr: %08x %08x%08x | %08x%08x\n",
+ * ((unsigned int *)((tag & 0xffffcc00) | ((ca+j) & ~(0xffffcc00)))),
+ * cache_hi, cache_lo, *(pa+1), *pa);
+ */
+
+ if (cache_hi != *(pa + 1) || cache_lo != *pa) {
+ /* Since icache is not working, stay out of it, by not printing */
+ die = 1;
+ bad[i][0] = (ca + j);
+ bad[i][1] = cache_hi;
+ bad[i][2] = cache_lo;
+ bad[i][3] = ((tag & 0xffffcc00) |
+ ((ca + j) & ~(0xffffcc00)));
+ bad[i][4] = *(pa + 1);
+ bad[i][5] = *(pa);
+ i++;
+ }
+ }
+ }
+ }
+ if (die) {
+ printk(KERN_EMERG "icache coherency error\n");
+ for (j = 0; j <= i; j++) {
+ printk(KERN_EMERG
+ "cache address : %08x cache value : %08x%08x\n",
+ bad[j][0], bad[j][1], bad[j][2]);
+ printk(KERN_EMERG
+ "physical address: %08x SDRAM value : %08x%08x\n",
+ bad[j][3], bad[j][4], bad[j][5]);
+ }
+ panic("icache coherency error");
+ } else {
+ printk(KERN_EMERG "icache checked, and OK\n");
+ }
+#endif
+
+ printk(KERN_EMERG "\n");
+ printk(KERN_EMERG "Exception: IRQ 0x%x entered\n", reason);
+ printk(KERN_EMERG " code=[0x%08lx], stack frame=0x%08lx, "
+ " bad PC=0x%08lx\n",
+ (unsigned long)regs->seqstat,
+ (unsigned long)regs,
+ (unsigned long)regs->pc);
+ if (reason == 0x5) {
+ printk(KERN_EMERG "----------- HARDWARE ERROR -----------\n");
+
+ /* There is only need to check for Hardware Errors, since other
+ * EXCEPTIONS are handled in TRAPS.c (MH)
+ */
+ switch (regs->seqstat & SEQSTAT_HWERRCAUSE) {
+ case (SEQSTAT_HWERRCAUSE_SYSTEM_MMR): /* System MMR Error */
+ info.si_code = BUS_ADRALN;
+ sig = SIGBUS;
+ printk(KERN_EMERG HWC_x2);
+ break;
+ case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR): /* External Memory Addressing Error */
+ info.si_code = BUS_ADRERR;
+ sig = SIGBUS;
+ printk(KERN_EMERG HWC_x3);
+ break;
+ case (SEQSTAT_HWERRCAUSE_PERF_FLOW): /* Performance Monitor Overflow */
+ printk(KERN_EMERG HWC_x12);
+ break;
+ case (SEQSTAT_HWERRCAUSE_RAISE_5): /* RAISE 5 instruction */
+ printk(KERN_EMERG HWC_x18);
+ break;
+ default: /* Reserved */
+ printk(KERN_EMERG HWC_default);
+ break;
+ }
+ }
+
+ regs->ipend = bfin_read_IPEND();
+ dump_bfin_regs(regs, (void *)regs->pc);
+ if (0 == (info.si_signo = sig) || 0 == user_mode(regs)) /* in kernelspace */
+ panic("Unhandled IRQ or exceptions!\n");
+ else { /* in userspace */
+ info.si_errno = 0;
+ info.si_addr = (void *)regs->pc;
+ force_sig_info(sig, &info, current);
+ }
+}
+
+#ifdef CONFIG_HARDWARE_PM
+/*
+ * call the handler of Performance overflow
+ */
+asmlinkage void pm_overflow(int irq, struct pt_regs *regs)
+{
+ pm_overflow_handler(irq, regs);
+}
+#endif
diff --git a/arch/blackfin/mach-common/lock.S b/arch/blackfin/mach-common/lock.S
new file mode 100644
index 000000000000..2cbb15b33925
--- /dev/null
+++ b/arch/blackfin/mach-common/lock.S
@@ -0,0 +1,204 @@
+/*
+ * File: arch/blackfin/mach-common/lock.S
+ * Based on:
+ * Author: LG Soft India
+ *
+ * Created: ?
+ * Description: kernel locks
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/cplb.h>
+#include <asm/blackfin.h>
+
+.text
+
+#ifdef CONFIG_BLKFIN_CACHE_LOCK
+
+/* When you come here, it is assumed that
+ * R0 - Which way to be locked
+ */
+
+ENTRY(_cache_grab_lock)
+
+ [--SP]=( R7:0,P5:0 );
+
+ P1.H = (IMEM_CONTROL >> 16);
+ P1.L = (IMEM_CONTROL & 0xFFFF);
+ P5.H = (ICPLB_ADDR0 >> 16);
+ P5.L = (ICPLB_ADDR0 & 0xFFFF);
+ P4.H = (ICPLB_DATA0 >> 16);
+ P4.L = (ICPLB_DATA0 & 0xFFFF);
+ R7 = R0;
+
+ /* If the code of interest already resides in the cache
+ * invalidate the entire cache itself.
+ * invalidate_entire_icache;
+ */
+
+ SP += -12;
+ [--SP] = RETS;
+ CALL _invalidate_entire_icache;
+ RETS = [SP++];
+ SP += 12;
+
+ /* Disable the Interrupts*/
+
+ CLI R3;
+
+.LLOCK_WAY:
+
+ /* Way0 - 0xFFA133E0
+ * Way1 - 0xFFA137E0
+ * Way2 - 0xFFA13BE0 Total Way Size = 4K
+ * Way3 - 0xFFA13FE0
+ */
+
+ /* Procedure Ex. -Set the locks for other ways by setting ILOC[3:1]
+ * Only Way0 of the instruction cache can now be
+ * replaced by a new code
+ */
+
+ R5 = R7;
+ CC = BITTST(R7,0);
+ IF CC JUMP .LCLEAR1;
+ R7 = 0;
+ BITSET(R7,0);
+ JUMP .LDONE1;
+
+.LCLEAR1:
+ R7 = 0;
+ BITCLR(R7,0);
+.LDONE1: R4 = R7 << 3;
+ R7 = [P1];
+ R7 = R7 | R4;
+ SSYNC; /* SSYNC required writing to IMEM_CONTROL. */
+ .align 8;
+ [P1] = R7;
+ SSYNC;
+
+ R7 = R5;
+ CC = BITTST(R7,1);
+ IF CC JUMP .LCLEAR2;
+ R7 = 0;
+ BITSET(R7,1);
+ JUMP .LDONE2;
+
+.LCLEAR2:
+ R7 = 0;
+ BITCLR(R7,1);
+.LDONE2: R4 = R7 << 3;
+ R7 = [P1];
+ R7 = R7 | R4;
+ SSYNC; /* SSYNC required writing to IMEM_CONTROL. */
+ .align 8;
+ [P1] = R7;
+ SSYNC;
+
+ R7 = R5;
+ CC = BITTST(R7,2);
+ IF CC JUMP .LCLEAR3;
+ R7 = 0;
+ BITSET(R7,2);
+ JUMP .LDONE3;
+.LCLEAR3:
+ R7 = 0;
+ BITCLR(R7,2);
+.LDONE3: R4 = R7 << 3;
+ R7 = [P1];
+ R7 = R7 | R4;
+ SSYNC; /* SSYNC required writing to IMEM_CONTROL. */
+ .align 8;
+ [P1] = R7;
+ SSYNC;
+
+
+ R7 = R5;
+ CC = BITTST(R7,3);
+ IF CC JUMP .LCLEAR4;
+ R7 = 0;
+ BITSET(R7,3);
+ JUMP .LDONE4;
+.LCLEAR4:
+ R7 = 0;
+ BITCLR(R7,3);
+.LDONE4: R4 = R7 << 3;
+ R7 = [P1];
+ R7 = R7 | R4;
+ SSYNC; /* SSYNC required writing to IMEM_CONTROL. */
+ .align 8;
+ [P1] = R7;
+ SSYNC;
+
+ STI R3;
+
+ ( R7:0,P5:0 ) = [SP++];
+
+ RTS;
+
+/* After the execution of critical code, the code is now locked into
+ * the cache way. Now we need to set ILOC.
+ *
+ * R0 - Which way to be locked
+ */
+
+ENTRY(_cache_lock)
+
+ [--SP]=( R7:0,P5:0 );
+
+ P1.H = (IMEM_CONTROL >> 16);
+ P1.L = (IMEM_CONTROL & 0xFFFF);
+
+ /* Disable the Interrupts*/
+ CLI R3;
+
+ R7 = [P1];
+ R2 = 0xFFFFFF87 (X);
+ R7 = R7 & R2;
+ R0 = R0 << 3;
+ R7 = R0 | R7;
+ SSYNC; /* SSYNC required writing to IMEM_CONTROL. */
+ .align 8;
+ [P1] = R7;
+ SSYNC;
+ /* Renable the Interrupts */
+ STI R3;
+
+ ( R7:0,P5:0 ) = [SP++];
+ RTS;
+
+#endif /* BLKFIN_CACHE_LOCK */
+
+/* Return the ILOC bits of IMEM_CONTROL
+ */
+
+ENTRY(_read_iloc)
+
+ P1.H = (IMEM_CONTROL >> 16);
+ P1.L = (IMEM_CONTROL & 0xFFFF);
+ R1 = 0xF;
+ R0 = [P1];
+ R0 = R0 >> 3;
+ R0 = R0 & R1;
+
+ RTS;
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
new file mode 100644
index 000000000000..deb27272c658
--- /dev/null
+++ b/arch/blackfin/mach-common/pm.c
@@ -0,0 +1,181 @@
+/*
+ * File: arch/blackfin/mach-common/pm.c
+ * Based on: arm/mach-omap/pm.c
+ * Author: Cliff Brake <cbrake@accelent.com> Copyright (c) 2001
+ *
+ * Created: 2001
+ * Description: Power management for the bfin
+ *
+ * Modified: Nicolas Pitre - PXA250 support
+ * Copyright (c) 2002 Monta Vista Software, Inc.
+ * David Singleton - OMAP1510
+ * Copyright (c) 2002 Monta Vista Software, Inc.
+ * Dirk Behme <dirk.behme@de.bosch.com> - OMAP1510/1610
+ * Copyright 2004
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/pm.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+
+#include <asm/io.h>
+#include <asm/dpmc.h>
+#include <asm/irq.h>
+
+
+#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_H
+#define WAKEUP_TYPE PM_WAKE_HIGH
+#endif
+
+#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_L
+#define WAKEUP_TYPE PM_WAKE_LOW
+#endif
+
+#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_F
+#define WAKEUP_TYPE PM_WAKE_FALLING
+#endif
+
+#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_R
+#define WAKEUP_TYPE PM_WAKE_RISING
+#endif
+
+#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_B
+#define WAKEUP_TYPE PM_WAKE_BOTH_EDGES
+#endif
+
+void bfin_pm_suspend_standby_enter(void)
+{
+#ifdef CONFIG_PM_WAKEUP_BY_GPIO
+ gpio_pm_wakeup_request(CONFIG_PM_WAKEUP_GPIO_NUMBER, WAKEUP_TYPE);
+#endif
+
+#if defined(CONFIG_PM_WAKEUP_BY_GPIO) || defined(CONFIG_PM_WAKEUP_GPIO_API)
+ {
+ u32 flags;
+
+ local_irq_save(flags);
+
+ sleep_deeper(gpio_pm_setup()); /*Goto Sleep*/
+
+ gpio_pm_restore();
+
+ bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+
+ local_irq_restore(flags);
+ }
+#endif
+
+#if defined(CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR)
+ sleep_deeper(CONFIG_PM_WAKEUP_SIC_IWR);
+ bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+#endif /* CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR */
+}
+
+
+/*
+ * bfin_pm_prepare - Do preliminary suspend work.
+ * @state: suspend state we're entering.
+ *
+ */
+static int bfin_pm_prepare(suspend_state_t state)
+{
+ int error = 0;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ break;
+ case PM_SUSPEND_MEM:
+ return -ENOTSUPP;
+
+ case PM_SUSPEND_DISK:
+ return -ENOTSUPP;
+
+ default:
+ return -EINVAL;
+ }
+
+ return error;
+}
+
+/*
+ * bfin_pm_enter - Actually enter a sleep state.
+ * @state: State we're entering.
+ *
+ */
+static int bfin_pm_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ bfin_pm_suspend_standby_enter();
+ break;
+ case PM_SUSPEND_MEM:
+ return -ENOTSUPP;
+
+ case PM_SUSPEND_DISK:
+ return -ENOTSUPP;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * bfin_pm_finish - Finish up suspend sequence.
+ * @state: State we're coming out of.
+ *
+ * This is called after we wake back up (or if entering the sleep state
+ * failed).
+ */
+static int bfin_pm_finish(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ break;
+
+ case PM_SUSPEND_MEM:
+ return -ENOTSUPP;
+
+ case PM_SUSPEND_DISK:
+ return -ENOTSUPP;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+struct pm_ops bfin_pm_ops = {
+ .pm_disk_mode = PM_DISK_PLATFORM,
+ .prepare = bfin_pm_prepare,
+ .enter = bfin_pm_enter,
+ .finish = bfin_pm_finish,
+};
+
+static int __init bfin_pm_init(void)
+{
+ pm_set_ops(&bfin_pm_ops);
+ return 0;
+}
+
+__initcall(bfin_pm_init);
diff --git a/arch/blackfin/mm/Makefile b/arch/blackfin/mm/Makefile
new file mode 100644
index 000000000000..2a7202ce01fd
--- /dev/null
+++ b/arch/blackfin/mm/Makefile
@@ -0,0 +1,5 @@
+#
+# arch/blackfin/mm/Makefile
+#
+
+obj-y := blackfin_sram.o init.o
diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c
new file mode 100644
index 000000000000..dd0c6501c424
--- /dev/null
+++ b/arch/blackfin/mm/blackfin_sram.c
@@ -0,0 +1,540 @@
+/*
+ * File: arch/blackfin/mm/blackfin_sram.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: SRAM driver for Blackfin ADSP-BF5xx
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/autoconf.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/ioport.h>
+#include <linux/fcntl.h>
+#include <linux/init.h>
+#include <linux/poll.h>
+#include <linux/proc_fs.h>
+#include <linux/spinlock.h>
+#include <linux/rtc.h>
+#include <asm/blackfin.h>
+#include "blackfin_sram.h"
+
+spinlock_t l1sram_lock, l1_data_sram_lock, l1_inst_sram_lock;
+
+#if CONFIG_L1_MAX_PIECE < 16
+#undef CONFIG_L1_MAX_PIECE
+#define CONFIG_L1_MAX_PIECE 16
+#endif
+
+#if CONFIG_L1_MAX_PIECE > 1024
+#undef CONFIG_L1_MAX_PIECE
+#define CONFIG_L1_MAX_PIECE 1024
+#endif
+
+#define SRAM_SLT_NULL 0
+#define SRAM_SLT_FREE 1
+#define SRAM_SLT_ALLOCATED 2
+
+/* the data structure for L1 scratchpad and DATA SRAM */
+struct l1_sram_piece {
+ void *paddr;
+ int size;
+ int flag;
+};
+
+static struct l1_sram_piece l1_ssram[CONFIG_L1_MAX_PIECE];
+
+#if L1_DATA_A_LENGTH != 0
+static struct l1_sram_piece l1_data_A_sram[CONFIG_L1_MAX_PIECE];
+#endif
+
+#if L1_DATA_B_LENGTH != 0
+static struct l1_sram_piece l1_data_B_sram[CONFIG_L1_MAX_PIECE];
+#endif
+
+#if L1_CODE_LENGTH != 0
+static struct l1_sram_piece l1_inst_sram[CONFIG_L1_MAX_PIECE];
+#endif
+
+/* L1 Scratchpad SRAM initialization function */
+void l1sram_init(void)
+{
+ printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n",
+ L1_SCRATCH_LENGTH >> 10);
+
+ memset(&l1_ssram, 0x00, sizeof(l1_ssram));
+ l1_ssram[0].paddr = (void*)L1_SCRATCH_START;
+ l1_ssram[0].size = L1_SCRATCH_LENGTH;
+ l1_ssram[0].flag = SRAM_SLT_FREE;
+
+ /* mutex initialize */
+ spin_lock_init(&l1sram_lock);
+}
+
+void l1_data_sram_init(void)
+{
+#if L1_DATA_A_LENGTH != 0
+ printk(KERN_INFO "Blackfin DATA_A SRAM: %d KB\n",
+ L1_DATA_A_LENGTH >> 10);
+
+ memset(&l1_data_A_sram, 0x00, sizeof(l1_data_A_sram));
+ l1_data_A_sram[0].paddr = (void*)L1_DATA_A_START +
+ (_ebss_l1 - _sdata_l1);
+ l1_data_A_sram[0].size = L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1);
+ l1_data_A_sram[0].flag = SRAM_SLT_FREE;
+#endif
+#if L1_DATA_B_LENGTH != 0
+ printk(KERN_INFO "Blackfin DATA_B SRAM: %d KB\n",
+ L1_DATA_B_LENGTH >> 10);
+
+ memset(&l1_data_B_sram, 0x00, sizeof(l1_data_B_sram));
+ l1_data_B_sram[0].paddr = (void*)L1_DATA_B_START;
+ l1_data_B_sram[0].size = L1_DATA_B_LENGTH;
+ l1_data_B_sram[0].flag = SRAM_SLT_FREE;
+#endif
+
+ /* mutex initialize */
+ spin_lock_init(&l1_data_sram_lock);
+}
+
+void l1_inst_sram_init(void)
+{
+#if L1_CODE_LENGTH != 0
+ printk(KERN_INFO "Blackfin Instruction SRAM: %d KB\n",
+ L1_CODE_LENGTH >> 10);
+
+ memset(&l1_inst_sram, 0x00, sizeof(l1_inst_sram));
+ l1_inst_sram[0].paddr = (void*)L1_CODE_START + (_etext_l1 - _stext_l1);
+ l1_inst_sram[0].size = L1_CODE_LENGTH - (_etext_l1 - _stext_l1);
+ l1_inst_sram[0].flag = SRAM_SLT_FREE;
+#endif
+
+ /* mutex initialize */
+ spin_lock_init(&l1_inst_sram_lock);
+}
+
+/* L1 memory allocate function */
+static void *_l1_sram_alloc(size_t size, struct l1_sram_piece *pfree, int count)
+{
+ int i, index = 0;
+ void *addr = NULL;
+
+ if (size <= 0)
+ return NULL;
+
+ /* Align the size */
+ size = (size + 3) & ~3;
+
+ /* not use the good method to match the best slot !!! */
+ /* search an available memeory slot */
+ for (i = 0; i < count; i++) {
+ if ((pfree[i].flag == SRAM_SLT_FREE)
+ && (pfree[i].size >= size)) {
+ addr = pfree[i].paddr;
+ pfree[i].flag = SRAM_SLT_ALLOCATED;
+ index = i;
+ break;
+ }
+ }
+ if (i >= count)
+ return NULL;
+
+ /* updated the NULL memeory slot !!! */
+ if (pfree[i].size > size) {
+ for (i = 0; i < count; i++) {
+ if (pfree[i].flag == SRAM_SLT_NULL) {
+ pfree[i].flag = SRAM_SLT_FREE;
+ pfree[i].paddr = addr + size;
+ pfree[i].size = pfree[index].size - size;
+ pfree[index].size = size;
+ break;
+ }
+ }
+ }
+
+ return addr;
+}
+
+/* Allocate the largest available block. */
+static void *_l1_sram_alloc_max(struct l1_sram_piece *pfree, int count,
+ unsigned long *psize)
+{
+ unsigned long best = 0;
+ int i, index = -1;
+ void *addr = NULL;
+
+ /* search an available memeory slot */
+ for (i = 0; i < count; i++) {
+ if (pfree[i].flag == SRAM_SLT_FREE && pfree[i].size > best) {
+ addr = pfree[i].paddr;
+ index = i;
+ best = pfree[i].size;
+ }
+ }
+ if (index < 0)
+ return NULL;
+ *psize = best;
+
+ pfree[index].flag = SRAM_SLT_ALLOCATED;
+ return addr;
+}
+
+/* L1 memory free function */
+static int _l1_sram_free(const void *addr,
+ struct l1_sram_piece *pfree, int count)
+{
+ int i, index = 0;
+
+ /* search the relevant memory slot */
+ for (i = 0; i < count; i++) {
+ if (pfree[i].paddr == addr) {
+ if (pfree[i].flag != SRAM_SLT_ALLOCATED) {
+ /* error log */
+ return -1;
+ }
+ index = i;
+ break;
+ }
+ }
+ if (i >= count)
+ return -1;
+
+ pfree[index].flag = SRAM_SLT_FREE;
+
+ /* link the next address slot */
+ for (i = 0; i < count; i++) {
+ if (((pfree[index].paddr + pfree[index].size) == pfree[i].paddr)
+ && (pfree[i].flag == SRAM_SLT_FREE)) {
+ pfree[i].flag = SRAM_SLT_NULL;
+ pfree[index].size += pfree[i].size;
+ pfree[index].flag = SRAM_SLT_FREE;
+ break;
+ }
+ }
+
+ /* link the last address slot */
+ for (i = 0; i < count; i++) {
+ if (((pfree[i].paddr + pfree[i].size) == pfree[index].paddr) &&
+ (pfree[i].flag == SRAM_SLT_FREE)) {
+ pfree[index].flag = SRAM_SLT_NULL;
+ pfree[i].size += pfree[index].size;
+ break;
+ }
+ }
+
+ return 0;
+}
+
+int sram_free(const void *addr)
+{
+ if (0) {}
+#if L1_CODE_LENGTH != 0
+ else if (addr >= (void *)L1_CODE_START
+ && addr < (void *)(L1_CODE_START + L1_CODE_LENGTH))
+ return l1_inst_sram_free(addr);
+#endif
+#if L1_DATA_A_LENGTH != 0
+ else if (addr >= (void *)L1_DATA_A_START
+ && addr < (void *)(L1_DATA_A_START + L1_DATA_A_LENGTH))
+ return l1_data_A_sram_free(addr);
+#endif
+#if L1_DATA_B_LENGTH != 0
+ else if (addr >= (void *)L1_DATA_B_START
+ && addr < (void *)(L1_DATA_B_START + L1_DATA_B_LENGTH))
+ return l1_data_B_sram_free(addr);
+#endif
+ else
+ return -1;
+}
+EXPORT_SYMBOL(sram_free);
+
+void *l1_data_A_sram_alloc(size_t size)
+{
+ unsigned flags;
+ void *addr = NULL;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1_data_sram_lock, flags);
+
+#if L1_DATA_A_LENGTH != 0
+ addr = _l1_sram_alloc(size, l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram));
+#endif
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1_data_sram_lock, flags);
+
+ pr_debug("Allocated address in l1_data_A_sram_alloc is 0x%lx+0x%lx\n",
+ (long unsigned int)addr, size);
+
+ return addr;
+}
+EXPORT_SYMBOL(l1_data_A_sram_alloc);
+
+int l1_data_A_sram_free(const void *addr)
+{
+ unsigned flags;
+ int ret;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1_data_sram_lock, flags);
+
+#if L1_DATA_A_LENGTH != 0
+ ret = _l1_sram_free(addr,
+ l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram));
+#else
+ ret = -1;
+#endif
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1_data_sram_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(l1_data_A_sram_free);
+
+void *l1_data_B_sram_alloc(size_t size)
+{
+#if L1_DATA_B_LENGTH != 0
+ unsigned flags;
+ void *addr;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1_data_sram_lock, flags);
+
+ addr = _l1_sram_alloc(size, l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram));
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1_data_sram_lock, flags);
+
+ pr_debug("Allocated address in l1_data_B_sram_alloc is 0x%lx+0x%lx\n",
+ (long unsigned int)addr, size);
+
+ return addr;
+#else
+ return NULL;
+#endif
+}
+EXPORT_SYMBOL(l1_data_B_sram_alloc);
+
+int l1_data_B_sram_free(const void *addr)
+{
+#if L1_DATA_B_LENGTH != 0
+ unsigned flags;
+ int ret;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1_data_sram_lock, flags);
+
+ ret = _l1_sram_free(addr, l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram));
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1_data_sram_lock, flags);
+
+ return ret;
+#else
+ return -1;
+#endif
+}
+EXPORT_SYMBOL(l1_data_B_sram_free);
+
+void *l1_data_sram_alloc(size_t size)
+{
+ void *addr = l1_data_A_sram_alloc(size);
+
+ if (!addr)
+ addr = l1_data_B_sram_alloc(size);
+
+ return addr;
+}
+EXPORT_SYMBOL(l1_data_sram_alloc);
+
+void *l1_data_sram_zalloc(size_t size)
+{
+ void *addr = l1_data_sram_alloc(size);
+
+ if (addr)
+ memset(addr, 0x00, size);
+
+ return addr;
+}
+EXPORT_SYMBOL(l1_data_sram_zalloc);
+
+int l1_data_sram_free(const void *addr)
+{
+ int ret;
+ ret = l1_data_A_sram_free(addr);
+ if (ret == -1)
+ ret = l1_data_B_sram_free(addr);
+ return ret;
+}
+EXPORT_SYMBOL(l1_data_sram_free);
+
+void *l1_inst_sram_alloc(size_t size)
+{
+#if L1_DATA_A_LENGTH != 0
+ unsigned flags;
+ void *addr;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1_inst_sram_lock, flags);
+
+ addr = _l1_sram_alloc(size, l1_inst_sram, ARRAY_SIZE(l1_inst_sram));
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1_inst_sram_lock, flags);
+
+ pr_debug("Allocated address in l1_inst_sram_alloc is 0x%lx+0x%lx\n",
+ (long unsigned int)addr, size);
+
+ return addr;
+#else
+ return NULL;
+#endif
+}
+EXPORT_SYMBOL(l1_inst_sram_alloc);
+
+int l1_inst_sram_free(const void *addr)
+{
+#if L1_CODE_LENGTH != 0
+ unsigned flags;
+ int ret;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1_inst_sram_lock, flags);
+
+ ret = _l1_sram_free(addr, l1_inst_sram, ARRAY_SIZE(l1_inst_sram));
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1_inst_sram_lock, flags);
+
+ return ret;
+#else
+ return -1;
+#endif
+}
+EXPORT_SYMBOL(l1_inst_sram_free);
+
+/* L1 Scratchpad memory allocate function */
+void *l1sram_alloc(size_t size)
+{
+ unsigned flags;
+ void *addr;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1sram_lock, flags);
+
+ addr = _l1_sram_alloc(size, l1_ssram, ARRAY_SIZE(l1_ssram));
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1sram_lock, flags);
+
+ return addr;
+}
+
+/* L1 Scratchpad memory allocate function */
+void *l1sram_alloc_max(size_t *psize)
+{
+ unsigned flags;
+ void *addr;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1sram_lock, flags);
+
+ addr = _l1_sram_alloc_max(l1_ssram, ARRAY_SIZE(l1_ssram), psize);
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1sram_lock, flags);
+
+ return addr;
+}
+
+/* L1 Scratchpad memory free function */
+int l1sram_free(const void *addr)
+{
+ unsigned flags;
+ int ret;
+
+ /* add mutex operation */
+ spin_lock_irqsave(&l1sram_lock, flags);
+
+ ret = _l1_sram_free(addr, l1_ssram, ARRAY_SIZE(l1_ssram));
+
+ /* add mutex operation */
+ spin_unlock_irqrestore(&l1sram_lock, flags);
+
+ return ret;
+}
+
+int sram_free_with_lsl(const void *addr)
+{
+ struct sram_list_struct *lsl, **tmp;
+ struct mm_struct *mm = current->mm;
+
+ for (tmp = &mm->context.sram_list; *tmp; tmp = &(*tmp)->next)
+ if ((*tmp)->addr == addr)
+ goto found;
+ return -1;
+found:
+ lsl = *tmp;
+ sram_free(addr);
+ *tmp = lsl->next;
+ kfree(lsl);
+
+ return 0;
+}
+EXPORT_SYMBOL(sram_free_with_lsl);
+
+void *sram_alloc_with_lsl(size_t size, unsigned long flags)
+{
+ void *addr = NULL;
+ struct sram_list_struct *lsl = NULL;
+ struct mm_struct *mm = current->mm;
+
+ lsl = kmalloc(sizeof(struct sram_list_struct), GFP_KERNEL);
+ if (!lsl)
+ return NULL;
+ memset(lsl, 0, sizeof(*lsl));
+
+ if (flags & L1_INST_SRAM)
+ addr = l1_inst_sram_alloc(size);
+
+ if (addr == NULL && (flags & L1_DATA_A_SRAM))
+ addr = l1_data_A_sram_alloc(size);
+
+ if (addr == NULL && (flags & L1_DATA_B_SRAM))
+ addr = l1_data_B_sram_alloc(size);
+
+ if (addr == NULL) {
+ kfree(lsl);
+ return NULL;
+ }
+ lsl->addr = addr;
+ lsl->length = size;
+ lsl->next = mm->context.sram_list;
+ mm->context.sram_list = lsl;
+ return addr;
+}
+EXPORT_SYMBOL(sram_alloc_with_lsl);
diff --git a/arch/blackfin/mm/blackfin_sram.h b/arch/blackfin/mm/blackfin_sram.h
new file mode 100644
index 000000000000..0fb73b78dd60
--- /dev/null
+++ b/arch/blackfin/mm/blackfin_sram.h
@@ -0,0 +1,38 @@
+/*
+ * File: arch/blackfin/mm/blackfin_sram.h
+ * Based on: arch/blackfin/mm/blackfin_sram.c
+ * Author: Mike Frysinger
+ *
+ * Created: Aug 2006
+ * Description: Local prototypes meant for internal use only
+ *
+ * Modified:
+ * Copyright 2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __BLACKFIN_SRAM_H__
+#define __BLACKFIN_SRAM_H__
+
+extern void l1sram_init(void);
+extern void l1_inst_sram_init(void);
+extern void l1_data_sram_init(void);
+extern void *l1sram_alloc(size_t);
+
+#endif
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
new file mode 100644
index 000000000000..73f72abed432
--- /dev/null
+++ b/arch/blackfin/mm/init.c
@@ -0,0 +1,208 @@
+/*
+ * File: arch/blackfin/mm/init.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/swap.h>
+#include <linux/bootmem.h>
+#include <asm/bfin-global.h>
+#include <asm/uaccess.h>
+#include <asm/l1layout.h>
+#include "blackfin_sram.h"
+
+/*
+ * BAD_PAGE is the page that is used for page faults when linux
+ * is out-of-memory. Older versions of linux just did a
+ * do_exit(), but using this instead means there is less risk
+ * for a process dying in kernel mode, possibly leaving a inode
+ * unused etc..
+ *
+ * BAD_PAGETABLE is the accompanying page-table: it is initialized
+ * to point to BAD_PAGE entries.
+ *
+ * ZERO_PAGE is a special page that is used for zero-initialized
+ * data and COW.
+ */
+static unsigned long empty_bad_page_table;
+
+static unsigned long empty_bad_page;
+
+unsigned long empty_zero_page;
+
+void show_mem(void)
+{
+ unsigned long i;
+ int free = 0, total = 0, reserved = 0, shared = 0;
+
+ int cached = 0;
+ printk(KERN_INFO "Mem-info:\n");
+ show_free_areas();
+ i = max_mapnr;
+ while (i-- > 0) {
+ total++;
+ if (PageReserved(mem_map + i))
+ reserved++;
+ else if (PageSwapCache(mem_map + i))
+ cached++;
+ else if (!page_count(mem_map + i))
+ free++;
+ else
+ shared += page_count(mem_map + i) - 1;
+ }
+ printk(KERN_INFO "%d pages of RAM\n", total);
+ printk(KERN_INFO "%d free pages\n", free);
+ printk(KERN_INFO "%d reserved pages\n", reserved);
+ printk(KERN_INFO "%d pages shared\n", shared);
+ printk(KERN_INFO "%d pages swap cached\n", cached);
+}
+
+/*
+ * paging_init() continues the virtual memory environment setup which
+ * was begun by the code in arch/head.S.
+ * The parameters are pointers to where to stick the starting and ending
+ * addresses of available kernel virtual memory.
+ */
+void paging_init(void)
+{
+ /*
+ * make sure start_mem is page aligned, otherwise bootmem and
+ * page_alloc get different views og the world
+ */
+ unsigned long end_mem = memory_end & PAGE_MASK;
+
+ pr_debug("start_mem is %#lx virtual_end is %#lx\n", PAGE_ALIGN(memory_start), end_mem);
+
+ /*
+ * initialize the bad page table and bad page to point
+ * to a couple of allocated pages
+ */
+ empty_bad_page_table = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
+ empty_bad_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
+ empty_zero_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
+ memset((void *)empty_zero_page, 0, PAGE_SIZE);
+
+ /*
+ * Set up SFC/DFC registers (user data space)
+ */
+ set_fs(KERNEL_DS);
+
+ pr_debug("free_area_init -> start_mem is %#lx virtual_end is %#lx\n",
+ PAGE_ALIGN(memory_start), end_mem);
+
+ {
+ unsigned long zones_size[MAX_NR_ZONES] = { 0, };
+
+ zones_size[ZONE_NORMAL] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT;
+#ifdef CONFIG_HIGHMEM
+ zones_size[ZONE_HIGHMEM] = 0;
+#endif
+ free_area_init(zones_size);
+ }
+}
+
+void mem_init(void)
+{
+ unsigned int codek = 0, datak = 0, initk = 0;
+ unsigned long tmp;
+ unsigned int len = _ramend - _rambase;
+ unsigned long start_mem = memory_start;
+ unsigned long end_mem = memory_end;
+
+ end_mem &= PAGE_MASK;
+ high_memory = (void *)end_mem;
+
+ start_mem = PAGE_ALIGN(start_mem);
+ max_mapnr = num_physpages = MAP_NR(high_memory);
+ printk(KERN_INFO "Physical pages: %lx\n", num_physpages);
+
+ /* This will put all memory onto the freelists. */
+ totalram_pages = free_all_bootmem();
+
+ codek = (_etext - _stext) >> 10;
+ datak = (__bss_stop - __bss_start) >> 10;
+ initk = (__init_end - __init_begin) >> 10;
+
+ tmp = nr_free_pages() << PAGE_SHIFT;
+ printk(KERN_INFO
+ "Memory available: %luk/%uk RAM, (%uk init code, %uk kernel code, %uk data, %uk dma)\n",
+ tmp >> 10, len >> 10, initk, codek, datak, DMA_UNCACHED_REGION >> 10);
+
+ /* Initialize the blackfin L1 Memory. */
+ l1sram_init();
+ l1_data_sram_init();
+ l1_inst_sram_init();
+
+ /* Allocate this once; never free it. We assume this gives us a
+ pointer to the start of L1 scratchpad memory; panic if it
+ doesn't. */
+ tmp = (unsigned long)l1sram_alloc(sizeof(struct l1_scratch_task_info));
+ if (tmp != (unsigned long)L1_SCRATCH_TASK_INFO) {
+ printk(KERN_EMERG "mem_init(): Did not get the right address from l1sram_alloc: %08lx != %08lx\n",
+ tmp, (unsigned long)L1_SCRATCH_TASK_INFO);
+ panic("No L1, time to give up\n");
+ }
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+ int pages = 0;
+ for (; start < end; start += PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(start));
+ init_page_count(virt_to_page(start));
+ free_page(start);
+ totalram_pages++;
+ pages++;
+ }
+ printk(KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages);
+}
+#endif
+
+void free_initmem(void)
+{
+#ifdef CONFIG_RAMKERNEL
+ unsigned long addr;
+/*
+ * the following code should be cool even if these sections
+ * are not page aligned.
+ */
+ addr = PAGE_ALIGN((unsigned long)(__init_begin));
+ /* next to check that the page we free is not a partial page */
+ for (; addr + PAGE_SIZE < (unsigned long)(__init_end);
+ addr += PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(addr));
+ init_page_count(virt_to_page(addr));
+ free_page(addr);
+ totalram_pages++;
+ }
+ printk(KERN_NOTICE
+ "Freeing unused kernel memory: %ldk freed (0x%x - 0x%x)\n",
+ (addr - PAGE_ALIGN((long)__init_begin)) >> 10,
+ (int)(PAGE_ALIGN((unsigned long)(__init_begin))),
+ (int)(addr - PAGE_SIZE));
+#endif
+}
diff --git a/arch/blackfin/oprofile/Kconfig b/arch/blackfin/oprofile/Kconfig
new file mode 100644
index 000000000000..0a2fd999c941
--- /dev/null
+++ b/arch/blackfin/oprofile/Kconfig
@@ -0,0 +1,29 @@
+menu "Profiling support"
+depends on EXPERIMENTAL
+
+config PROFILING
+ bool "Profiling support (EXPERIMENTAL)"
+ help
+ Say Y here to enable the extended profiling support mechanisms used
+ by profilers such as OProfile.
+
+config OPROFILE
+ tristate "OProfile system profiling (EXPERIMENTAL)"
+ depends on PROFILING
+ help
+ OProfile is a profiling system capable of profiling the
+ whole system, include the kernel, kernel modules, libraries,
+ and applications.
+
+ If unsure, say N.
+
+config HARDWARE_PM
+ tristate "Hardware Performance Monitor Profiling"
+ depends on PROFILING
+ help
+ take use of hardware performance monitor to profiling the kernel
+ and application.
+
+ If unsure, say N.
+
+endmenu
diff --git a/arch/blackfin/oprofile/Makefile b/arch/blackfin/oprofile/Makefile
new file mode 100644
index 000000000000..634e300d67e2
--- /dev/null
+++ b/arch/blackfin/oprofile/Makefile
@@ -0,0 +1,14 @@
+#
+# arch/blackfin/oprofile/Makefile
+#
+
+obj-$(CONFIG_OPROFILE) += oprofile.o
+
+DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \
+ oprof.o cpu_buffer.o buffer_sync.o \
+ event_buffer.o oprofile_files.o \
+ oprofilefs.o oprofile_stats.o \
+ timer_int.o )
+
+oprofile-y := $(DRIVER_OBJS) common.o
+oprofile-$(CONFIG_HARDWARE_PM) += op_model_bf533.o
diff --git a/arch/blackfin/oprofile/common.c b/arch/blackfin/oprofile/common.c
new file mode 100644
index 000000000000..009a1700c854
--- /dev/null
+++ b/arch/blackfin/oprofile/common.c
@@ -0,0 +1,168 @@
+/*
+ * File: arch/blackfin/oprofile/common.c
+ * Based on: arch/alpha/oprofile/common.c
+ * Author: Anton Blanchard <anton@au.ibm.com>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <linux/mutex.h>
+
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/blackfin.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include "op_blackfin.h"
+
+#define BFIN_533_ID 0xE5040003
+#define BFIN_537_ID 0xE5040002
+
+static int pfmon_enabled;
+static struct mutex pfmon_lock;
+
+struct op_bfin533_model *model;
+
+struct op_counter_config ctr[OP_MAX_COUNTER];
+
+static int op_bfin_setup(void)
+{
+ int ret;
+
+ /* Pre-compute the values to stuff in the hardware registers. */
+ spin_lock(&oprofilefs_lock);
+ ret = model->reg_setup(ctr);
+ spin_unlock(&oprofilefs_lock);
+
+ return ret;
+}
+
+static void op_bfin_shutdown(void)
+{
+#if 0
+ /* what is the difference between shutdown and stop? */
+#endif
+}
+
+static int op_bfin_start(void)
+{
+ int ret = -EBUSY;
+
+ printk(KERN_INFO "KSDBG:in %s\n", __FUNCTION__);
+ mutex_lock(&pfmon_lock);
+ if (!pfmon_enabled) {
+ ret = model->start(ctr);
+ pfmon_enabled = !ret;
+ }
+ mutex_unlock(&pfmon_lock);
+
+ return ret;
+}
+
+static void op_bfin_stop(void)
+{
+ mutex_lock(&pfmon_lock);
+ if (pfmon_enabled) {
+ model->stop();
+ pfmon_enabled = 0;
+ }
+ mutex_unlock(&pfmon_lock);
+}
+
+static int op_bfin_create_files(struct super_block *sb, struct dentry *root)
+{
+ int i;
+
+ for (i = 0; i < model->num_counters; ++i) {
+ struct dentry *dir;
+ char buf[3];
+ printk(KERN_INFO "Oprofile: creating files... \n");
+
+ snprintf(buf, sizeof buf, "%d", i);
+ dir = oprofilefs_mkdir(sb, root, buf);
+
+ oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
+ oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
+ oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
+ /*
+ * We dont support per counter user/kernel selection, but
+ * we leave the entries because userspace expects them
+ */
+ oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
+ oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
+ oprofilefs_create_ulong(sb, dir, "unit_mask",
+ &ctr[i].unit_mask);
+ }
+
+ return 0;
+}
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+#ifdef CONFIG_HARDWARE_PM
+ unsigned int dspid;
+
+ mutex_init(&pfmon_lock);
+
+ dspid = bfin_read_DSPID();
+
+ printk(KERN_INFO "Oprofile got the cpu id is 0x%x. \n", dspid);
+
+ switch (dspid) {
+ case BFIN_533_ID:
+ model = &op_model_bfin533;
+ model->num_counters = 2;
+ break;
+ case BFIN_537_ID:
+ model = &op_model_bfin533;
+ model->num_counters = 2;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ ops->cpu_type = model->name;
+ ops->create_files = op_bfin_create_files;
+ ops->setup = op_bfin_setup;
+ ops->shutdown = op_bfin_shutdown;
+ ops->start = op_bfin_start;
+ ops->stop = op_bfin_stop;
+
+ printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
+ ops->cpu_type);
+
+ return 0;
+#else
+ return -1;
+#endif
+}
+
+void oprofile_arch_exit(void)
+{
+}
diff --git a/arch/blackfin/oprofile/op_blackfin.h b/arch/blackfin/oprofile/op_blackfin.h
new file mode 100644
index 000000000000..f88f446c814f
--- /dev/null
+++ b/arch/blackfin/oprofile/op_blackfin.h
@@ -0,0 +1,98 @@
+/*
+ * File: arch/blackfin/oprofile/op_blackfin.h
+ * Based on:
+ * Author: Anton Blanchard <anton@au.ibm.com>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef OP_BLACKFIN_H
+#define OP_BLACKFIN_H 1
+
+#define OP_MAX_COUNTER 2
+
+#include <asm/blackfin.h>
+
+/* Per-counter configuration as set via oprofilefs. */
+struct op_counter_config {
+ unsigned long valid;
+ unsigned long enabled;
+ unsigned long event;
+ unsigned long count;
+ unsigned long kernel;
+ unsigned long user;
+ unsigned long unit_mask;
+};
+
+/* System-wide configuration as set via oprofilefs. */
+struct op_system_config {
+ unsigned long enable_kernel;
+ unsigned long enable_user;
+};
+
+/* Per-arch configuration */
+struct op_bfin533_model {
+ int (*reg_setup) (struct op_counter_config *);
+ int (*start) (struct op_counter_config *);
+ void (*stop) (void);
+ int num_counters;
+ char *name;
+};
+
+extern struct op_bfin533_model op_model_bfin533;
+
+static inline unsigned int ctr_read(void)
+{
+ unsigned int tmp;
+
+ tmp = bfin_read_PFCTL();
+ __builtin_bfin_csync();
+
+ return tmp;
+}
+
+static inline void ctr_write(unsigned int val)
+{
+ bfin_write_PFCTL(val);
+ __builtin_bfin_csync();
+}
+
+static inline void count_read(unsigned int *count)
+{
+ count[0] = bfin_read_PFCNTR0();
+ count[1] = bfin_read_PFCNTR1();
+ __builtin_bfin_csync();
+}
+
+static inline void count_write(unsigned int *count)
+{
+ bfin_write_PFCNTR0(count[0]);
+ bfin_write_PFCNTR1(count[1]);
+ __builtin_bfin_csync();
+}
+
+extern int pm_overflow_handler(int irq, struct pt_regs *regs);
+
+#endif
diff --git a/arch/blackfin/oprofile/op_model_bf533.c b/arch/blackfin/oprofile/op_model_bf533.c
new file mode 100644
index 000000000000..b7a20a006b49
--- /dev/null
+++ b/arch/blackfin/oprofile/op_model_bf533.c
@@ -0,0 +1,161 @@
+/*
+ * File: arch/blackfin/oprofile/op_model_bf533.c
+ * Based on:
+ * Author: Anton Blanchard <anton@au.ibm.com>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/blackfin.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include "op_blackfin.h"
+
+#define PM_ENABLE 0x01;
+#define PM_CTL1_ENABLE 0x18
+#define PM_CTL0_ENABLE 0xC000
+#define COUNT_EDGE_ONLY 0x3000000
+
+static int oprofile_running;
+
+static unsigned curr_pfctl, curr_count[2];
+
+static int bfin533_reg_setup(struct op_counter_config *ctr)
+{
+ unsigned int pfctl = ctr_read();
+ unsigned int count[2];
+
+ /* set Blackfin perf monitor regs with ctr */
+ if (ctr[0].enabled) {
+ pfctl |= (PM_CTL0_ENABLE | ((char)ctr[0].event << 5));
+ count[0] = 0xFFFFFFFF - ctr[0].count;
+ curr_count[0] = count[0];
+ }
+ if (ctr[1].enabled) {
+ pfctl |= (PM_CTL1_ENABLE | ((char)ctr[1].event << 16));
+ count[1] = 0xFFFFFFFF - ctr[1].count;
+ curr_count[1] = count[1];
+ }
+
+ pr_debug("ctr[0].enabled=%d,ctr[1].enabled=%d,ctr[0].event<<5=0x%x,ctr[1].event<<16=0x%x\n", ctr[0].enabled, ctr[1].enabled, ctr[0].event << 5, ctr[1].event << 16);
+ pfctl |= COUNT_EDGE_ONLY;
+ curr_pfctl = pfctl;
+
+ pr_debug("write 0x%x to pfctl\n", pfctl);
+ ctr_write(pfctl);
+ count_write(count);
+
+ return 0;
+}
+
+static int bfin533_start(struct op_counter_config *ctr)
+{
+ unsigned int pfctl = ctr_read();
+
+ pfctl |= PM_ENABLE;
+ curr_pfctl = pfctl;
+
+ ctr_write(pfctl);
+
+ oprofile_running = 1;
+ pr_debug("start oprofile counter \n");
+
+ return 0;
+}
+
+static void bfin533_stop(void)
+{
+ int pfctl;
+
+ pfctl = ctr_read();
+ pfctl &= ~PM_ENABLE;
+ /* freeze counters */
+ ctr_write(pfctl);
+
+ oprofile_running = 0;
+ pr_debug("stop oprofile counter \n");
+}
+
+static int get_kernel(void)
+{
+ int ipend, is_kernel;
+
+ ipend = bfin_read_IPEND();
+
+ /* test bit 15 */
+ is_kernel = ((ipend & 0x8000) != 0);
+
+ return is_kernel;
+}
+
+int pm_overflow_handler(int irq, struct pt_regs *regs)
+{
+ int is_kernel;
+ int i, cpu;
+ unsigned int pc, pfctl;
+ unsigned int count[2];
+
+ pr_debug("get interrupt in %s\n", __FUNCTION__);
+ if (oprofile_running == 0) {
+ pr_debug("error: entering interrupt when oprofile is stopped.\n\r");
+ return -1;
+ }
+
+ is_kernel = get_kernel();
+ cpu = smp_processor_id();
+ pc = regs->pc;
+ pfctl = ctr_read();
+
+ /* read the two event counter regs */
+ count_read(count);
+
+ /* if the counter overflows, add sample to oprofile buffer */
+ for (i = 0; i < 2; ++i) {
+ if (oprofile_running) {
+ oprofile_add_sample(regs, i);
+ }
+ }
+
+ /* reset the perfmon counter */
+ ctr_write(curr_pfctl);
+ count_write(curr_count);
+ return 0;
+}
+
+struct op_bfin533_model op_model_bfin533 = {
+ .reg_setup = bfin533_reg_setup,
+ .start = bfin533_start,
+ .stop = bfin533_stop,
+ .num_counters = 2,
+ .name = "blackfin/bf533"
+};
diff --git a/arch/blackfin/oprofile/timer_int.c b/arch/blackfin/oprofile/timer_int.c
new file mode 100644
index 000000000000..8fba16c846c9
--- /dev/null
+++ b/arch/blackfin/oprofile/timer_int.c
@@ -0,0 +1,74 @@
+/*
+ * File: arch/blackfin/oprofile/timer_int.c
+ * Based on:
+ * Author: Michael Kang
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/irq.h>
+#include <linux/oprofile.h>
+
+#include <asm/ptrace.h>
+
+static void enable_sys_timer0()
+{
+}
+static void disable_sys_timer0()
+{
+}
+
+static irqreturn_t sys_timer0_int_handler(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ oprofile_add_sample(regs, 0);
+ return IRQ_HANDLED;
+}
+
+static int sys_timer0_start(void)
+{
+ enable_sys_timer0();
+ return request_irq(IVG11, sys_timer0_int_handler, 0, "sys_timer0", NULL);
+}
+
+static void sys_timer0_stop(void)
+{
+ disable_sys_timer();
+}
+
+int __init sys_timer0_init(struct oprofile_operations *ops)
+{
+ extern int nmi_active;
+
+ if (nmi_active <= 0)
+ return -ENODEV;
+
+ ops->start = timer_start;
+ ops->stop = timer_stop;
+ ops->cpu_type = "timer";
+ printk(KERN_INFO "oprofile: using NMI timer interrupt.\n");
+ return 0;
+}