summaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel/eeh.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/kernel/eeh.c')
-rw-r--r--arch/powerpc/kernel/eeh.c72
1 files changed, 35 insertions, 37 deletions
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 39954fe941b8..55593ee2d5aa 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -231,7 +231,7 @@ static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len)
void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
{
size_t loglen = 0;
- struct eeh_dev *edev;
+ struct eeh_dev *edev, *tmp;
bool valid_cfg_log = true;
/*
@@ -251,7 +251,7 @@ void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
eeh_pe_restore_bars(pe);
pci_regs_buf[0] = 0;
- eeh_pe_for_each_dev(pe, edev) {
+ eeh_pe_for_each_dev(pe, edev, tmp) {
loglen += eeh_gather_pci_data(edev, pci_regs_buf + loglen,
EEH_PCI_REGS_LOG_LEN - loglen);
}
@@ -499,8 +499,6 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon
}
eeh_dev_check_failure(edev);
-
- pci_dev_put(eeh_dev_to_pci_dev(edev));
return val;
}
@@ -838,7 +836,7 @@ core_initcall_sync(eeh_init);
* on the CEC architecture, type of the device, on earlier boot
* command-line arguments & etc.
*/
-static void eeh_add_device_early(struct device_node *dn)
+void eeh_add_device_early(struct device_node *dn)
{
struct pci_controller *phb;
@@ -886,7 +884,7 @@ EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
* This routine must be used to complete EEH initialization for PCI
* devices that were added after system boot (e.g. hotplug, dlpar).
*/
-static void eeh_add_device_late(struct pci_dev *dev)
+void eeh_add_device_late(struct pci_dev *dev)
{
struct device_node *dn;
struct eeh_dev *edev;
@@ -902,9 +900,23 @@ static void eeh_add_device_late(struct pci_dev *dev)
pr_debug("EEH: Already referenced !\n");
return;
}
- WARN_ON(edev->pdev);
- pci_dev_get(dev);
+ /*
+ * The EEH cache might not be removed correctly because of
+ * unbalanced kref to the device during unplug time, which
+ * relies on pcibios_release_device(). So we have to remove
+ * that here explicitly.
+ */
+ if (edev->pdev) {
+ eeh_rmv_from_parent_pe(edev);
+ eeh_addr_cache_rmv_dev(edev->pdev);
+ eeh_sysfs_remove_device(edev->pdev);
+ edev->mode &= ~EEH_DEV_SYSFS;
+
+ edev->pdev = NULL;
+ dev->dev.archdata.edev = NULL;
+ }
+
edev->pdev = dev;
dev->dev.archdata.edev = edev;
@@ -967,7 +979,6 @@ EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
/**
* eeh_remove_device - Undo EEH setup for the indicated pci device
* @dev: pci device to be removed
- * @purge_pe: remove the PE or not
*
* This routine should be called when a device is removed from
* a running system (e.g. by hotplug or dlpar). It unregisters
@@ -975,7 +986,7 @@ EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
* this device will no longer be detected after this call; thus,
* i/o errors affecting this slot may leave this device unusable.
*/
-static void eeh_remove_device(struct pci_dev *dev, int purge_pe)
+void eeh_remove_device(struct pci_dev *dev)
{
struct eeh_dev *edev;
@@ -986,42 +997,29 @@ static void eeh_remove_device(struct pci_dev *dev, int purge_pe)
/* Unregister the device with the EEH/PCI address search system */
pr_debug("EEH: Removing device %s\n", pci_name(dev));
- if (!edev || !edev->pdev) {
+ if (!edev || !edev->pdev || !edev->pe) {
pr_debug("EEH: Not referenced !\n");
return;
}
+
+ /*
+ * During the hotplug for EEH error recovery, we need the EEH
+ * device attached to the parent PE in order for BAR restore
+ * a bit later. So we keep it for BAR restore and remove it
+ * from the parent PE during the BAR resotre.
+ */
edev->pdev = NULL;
dev->dev.archdata.edev = NULL;
- pci_dev_put(dev);
+ if (!(edev->pe->state & EEH_PE_KEEP))
+ eeh_rmv_from_parent_pe(edev);
+ else
+ edev->mode |= EEH_DEV_DISCONNECTED;
- eeh_rmv_from_parent_pe(edev, purge_pe);
eeh_addr_cache_rmv_dev(dev);
eeh_sysfs_remove_device(dev);
+ edev->mode &= ~EEH_DEV_SYSFS;
}
-/**
- * eeh_remove_bus_device - Undo EEH setup for the indicated PCI device
- * @dev: PCI device
- * @purge_pe: remove the corresponding PE or not
- *
- * This routine must be called when a device is removed from the
- * running system through hotplug or dlpar. The corresponding
- * PCI address cache will be removed.
- */
-void eeh_remove_bus_device(struct pci_dev *dev, int purge_pe)
-{
- struct pci_bus *bus = dev->subordinate;
- struct pci_dev *child, *tmp;
-
- eeh_remove_device(dev, purge_pe);
-
- if (bus && dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- list_for_each_entry_safe(child, tmp, &bus->devices, bus_list)
- eeh_remove_bus_device(child, purge_pe);
- }
-}
-EXPORT_SYMBOL_GPL(eeh_remove_bus_device);
-
static int proc_eeh_show(struct seq_file *m, void *v)
{
if (0 == eeh_subsystem_enabled) {
@@ -1063,7 +1061,7 @@ static const struct file_operations proc_eeh_operations = {
static int __init eeh_init_proc(void)
{
- if (machine_is(pseries))
+ if (machine_is(pseries) || machine_is(powernv))
proc_create("powerpc/eeh", 0, NULL, &proc_eeh_operations);
return 0;
}