1 files changed, 141 insertions, 0 deletions
diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu13_driver_if_v13_0_6.h b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu13_driver_if_v13_0_6.h
new file mode 100644
index 000000000000..be596777cd2c
--- /dev/null
+++ b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu13_driver_if_v13_0_6.h
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2021 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+#ifndef SMU_13_0_6_DRIVER_IF_H
+#define SMU_13_0_6_DRIVER_IF_H
+
+// *** IMPORTANT ***
+// PMFW TEAM: Always increment the interface version if
+// anything is changed in this file
+#define SMU13_0_6_DRIVER_IF_VERSION 0x08042022
+
+//I2C Interface
+#define NUM_I2C_CONTROLLERS                8
+#define I2C_CONTROLLER_ENABLED             1
+#define I2C_CONTROLLER_DISABLED            0
+
+#define MAX_SW_I2C_COMMANDS                24
+
+typedef enum {
+  I2C_CONTROLLER_PORT_0, //CKSVII2C0
+  I2C_CONTROLLER_PORT_1, //CKSVII2C1
+  I2C_CONTROLLER_PORT_COUNT,
+} I2cControllerPort_e;
+
+typedef enum {
+  UNSUPPORTED_1,              //50  Kbits/s not supported anymore!
+  I2C_SPEED_STANDARD_100K,    //100 Kbits/s
+  I2C_SPEED_FAST_400K,        //400 Kbits/s
+  I2C_SPEED_FAST_PLUS_1M,     //1   Mbits/s (in fast mode)
+  UNSUPPORTED_2,              //1   Mbits/s (in high speed mode)  not supported anymore!
+  UNSUPPORTED_3,              //2.3 Mbits/s  not supported anymore!
+  I2C_SPEED_COUNT,
+} I2cSpeed_e;
+
+typedef enum {
+  I2C_CMD_READ,
+  I2C_CMD_WRITE,
+  I2C_CMD_COUNT,
+} I2cCmdType_e;
+
+#define CMDCONFIG_STOP_BIT             0
+#define CMDCONFIG_RESTART_BIT          1
+#define CMDCONFIG_READWRITE_BIT        2 //bit should be 0 for read, 1 for write
+
+#define CMDCONFIG_STOP_MASK           (1 << CMDCONFIG_STOP_BIT)
+#define CMDCONFIG_RESTART_MASK        (1 << CMDCONFIG_RESTART_BIT)
+#define CMDCONFIG_READWRITE_MASK      (1 << CMDCONFIG_READWRITE_BIT)
+
+typedef struct {
+  uint8_t ReadWriteData;  //Return data for read. Data to send for write
+  uint8_t CmdConfig; //Includes whether associated command should have a stop or restart command, and is a read or write
+} SwI2cCmd_t; //SW I2C Command Table
+
+typedef struct {
+  uint8_t    I2CcontrollerPort; //CKSVII2C0(0) or //CKSVII2C1(1)
+  uint8_t    I2CSpeed;          //Use I2cSpeed_e to indicate speed to select
+  uint8_t    SlaveAddress;      //Slave address of device
+  uint8_t    NumCmds;           //Number of commands
+  SwI2cCmd_t SwI2cCmds[MAX_SW_I2C_COMMANDS];
+} SwI2cRequest_t; // SW I2C Request Table
+
+typedef struct {
+  SwI2cRequest_t SwI2cRequest;
+  uint32_t       Spare[8];
+  uint32_t       MmHubPadding[8]; // SMU internal use
+} SwI2cRequestExternal_t;
+
+typedef enum {
+  PPCLK_VCLK,
+  PPCLK_DCLK,
+  PPCLK_SOCCLK,
+  PPCLK_UCLK,
+  PPCLK_FCLK,
+  PPCLK_LCLK,
+  PPCLK_COUNT,
+} PPCLK_e;
+
+typedef enum {
+  GPIO_INT_POLARITY_ACTIVE_LOW,
+  GPIO_INT_POLARITY_ACTIVE_HIGH,
+} GpioIntPolarity_e;
+
+//TODO confirm if this is used in SMU_13_0_6 PPSMC_MSG_SetUclkDpmMode
+typedef enum {
+  UCLK_DPM_MODE_BANDWIDTH,
+  UCLK_DPM_MODE_LATENCY,
+} UCLK_DPM_MODE_e;
+
+typedef struct {
+  //0-26 SOC, 27-29 SOCIO
+  uint16_t avgPsmCount[30];
+  uint16_t minPsmCount[30];
+  float    avgPsmVoltage[30];
+  float    minPsmVoltage[30];
+} AvfsDebugTableAid_t;
+
+typedef struct {
+  //0-27 GFX, 28-29 SOC
+  uint16_t avgPsmCount[30];
+  uint16_t minPsmCount[30];
+  float    avgPsmVoltage[30];
+  float    minPsmVoltage[30];
+} AvfsDebugTableXcd_t;
+
+// These defines are used with the following messages:
+// SMC_MSG_TransferTableDram2Smu
+// SMC_MSG_TransferTableSmu2Dram
+// #define TABLE_PPTABLE                 0
+// #define TABLE_AVFS_PSM_DEBUG          1
+// #define TABLE_AVFS_FUSE_OVERRIDE      2
+// #define TABLE_PMSTATUSLOG             3
+// #define TABLE_SMU_METRICS             4
+// #define TABLE_DRIVER_SMU_CONFIG       5
+// #define TABLE_I2C_COMMANDS            6
+// #define TABLE_COUNT                   7
+
+// // Table transfer status
+// #define TABLE_TRANSFER_OK         0x0
+// #define TABLE_TRANSFER_FAILED     0xFF
+// #define TABLE_TRANSFER_PENDING    0xAB
+
+#endif