diff options
Diffstat (limited to 'drivers/gpu/drm/bridge/parade-ps8640.c')
| -rw-r--r-- | drivers/gpu/drm/bridge/parade-ps8640.c | 67 |
1 files changed, 43 insertions, 24 deletions
diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c index 4b361d7d5e44..c3eb45179405 100644 --- a/drivers/gpu/drm/bridge/parade-ps8640.c +++ b/drivers/gpu/drm/bridge/parade-ps8640.c @@ -105,6 +105,7 @@ struct ps8640 { struct gpio_desc *gpio_reset; struct gpio_desc *gpio_powerdown; struct device_link *link; + struct edid *edid; bool pre_enabled; bool need_post_hpd_delay; }; @@ -183,7 +184,7 @@ static int _ps8640_wait_hpd_asserted(struct ps8640 *ps_bridge, unsigned long wai * actually connected to GPIO9). */ ret = regmap_read_poll_timeout(map, PAGE2_GPIO_H, status, - status & PS_GPIO9, wait_us / 10, wait_us); + status & PS_GPIO9, 20000, wait_us); /* * The first time we see HPD go high after a reset we delay an extra @@ -542,34 +543,44 @@ static struct edid *ps8640_bridge_get_edid(struct drm_bridge *bridge, struct drm_connector *connector) { struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); + struct device *dev = &ps_bridge->page[PAGE0_DP_CNTL]->dev; bool poweroff = !ps_bridge->pre_enabled; - struct edid *edid; - /* - * When we end calling get_edid() triggered by an ioctl, i.e - * - * drm_mode_getconnector (ioctl) - * -> drm_helper_probe_single_connector_modes - * -> drm_bridge_connector_get_modes - * -> ps8640_bridge_get_edid - * - * We need to make sure that what we need is enabled before reading - * EDID, for this chip, we need to do a full poweron, otherwise it will - * fail. - */ - drm_atomic_bridge_chain_pre_enable(bridge, connector->state->state); + if (!ps_bridge->edid) { + /* + * When we end calling get_edid() triggered by an ioctl, i.e + * + * drm_mode_getconnector (ioctl) + * -> drm_helper_probe_single_connector_modes + * -> drm_bridge_connector_get_modes + * -> ps8640_bridge_get_edid + * + * We need to make sure that what we need is enabled before + * reading EDID, for this chip, we need to do a full poweron, + * otherwise it will fail. + */ + if (poweroff) + drm_atomic_bridge_chain_pre_enable(bridge, + connector->state->state); - edid = drm_get_edid(connector, - ps_bridge->page[PAGE0_DP_CNTL]->adapter); + ps_bridge->edid = drm_get_edid(connector, + ps_bridge->page[PAGE0_DP_CNTL]->adapter); - /* - * If we call the get_edid() function without having enabled the chip - * before, return the chip to its original power state. - */ - if (poweroff) - drm_atomic_bridge_chain_post_disable(bridge, connector->state->state); + /* + * If we call the get_edid() function without having enabled the + * chip before, return the chip to its original power state. + */ + if (poweroff) + drm_atomic_bridge_chain_post_disable(bridge, + connector->state->state); + } + + if (!ps_bridge->edid) { + dev_err(dev, "Failed to get EDID\n"); + return NULL; + } - return edid; + return drm_edid_duplicate(ps_bridge->edid); } static void ps8640_runtime_disable(void *data) @@ -766,6 +777,13 @@ static int ps8640_probe(struct i2c_client *client) return ret; } +static void ps8640_remove(struct i2c_client *client) +{ + struct ps8640 *ps_bridge = i2c_get_clientdata(client); + + kfree(ps_bridge->edid); +} + static const struct of_device_id ps8640_match[] = { { .compatible = "parade,ps8640" }, { } @@ -774,6 +792,7 @@ MODULE_DEVICE_TABLE(of, ps8640_match); static struct i2c_driver ps8640_driver = { .probe_new = ps8640_probe, + .remove = ps8640_remove, .driver = { .name = "ps8640", .of_match_table = ps8640_match, |