diff options
Diffstat (limited to 'drivers/i2c/chips/w83l785ts.c')
| -rw-r--r-- | drivers/i2c/chips/w83l785ts.c | 328 |
1 files changed, 0 insertions, 328 deletions
diff --git a/drivers/i2c/chips/w83l785ts.c b/drivers/i2c/chips/w83l785ts.c deleted file mode 100644 index 4469d52aba4c..000000000000 --- a/drivers/i2c/chips/w83l785ts.c +++ /dev/null @@ -1,328 +0,0 @@ -/* - * w83l785ts.c - Part of lm_sensors, Linux kernel modules for hardware - * monitoring - * Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org> - * - * Inspired from the lm83 driver. The W83L785TS-S is a sensor chip made - * by Winbond. It reports a single external temperature with a 1 deg - * resolution and a 3 deg accuracy. Datasheet can be obtained from - * Winbond's website at: - * http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L785TS-S.pdf - * - * Ported to Linux 2.6 by Wolfgang Ziegler <nuppla@gmx.at> and Jean Delvare - * <khali@linux-fr.org>. - * - * Thanks to James Bolt <james@evilpenguin.com> for benchmarking the read - * error handling mechanism. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> - -/* How many retries on register read error */ -#define MAX_RETRIES 5 - -/* - * Address to scan - * Address is fully defined internally and cannot be changed. - */ - -static unsigned short normal_i2c[] = { 0x2e, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* - * Insmod parameters - */ - -SENSORS_INSMOD_1(w83l785ts); - -/* - * The W83L785TS-S registers - * Manufacturer ID is 0x5CA3 for Winbond. - */ - -#define W83L785TS_REG_MAN_ID1 0x4D -#define W83L785TS_REG_MAN_ID2 0x4C -#define W83L785TS_REG_CHIP_ID 0x4E -#define W83L785TS_REG_CONFIG 0x40 -#define W83L785TS_REG_TYPE 0x52 -#define W83L785TS_REG_TEMP 0x27 -#define W83L785TS_REG_TEMP_OVER 0x53 /* not sure about this one */ - -/* - * Conversions - * The W83L785TS-S uses signed 8-bit values. - */ - -#define TEMP_FROM_REG(val) ((val & 0x80 ? val-0x100 : val) * 1000) - -/* - * Functions declaration - */ - -static int w83l785ts_attach_adapter(struct i2c_adapter *adapter); -static int w83l785ts_detect(struct i2c_adapter *adapter, int address, - int kind); -static int w83l785ts_detach_client(struct i2c_client *client); -static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval); -static struct w83l785ts_data *w83l785ts_update_device(struct device *dev); - -/* - * Driver data (common to all clients) - */ - -static struct i2c_driver w83l785ts_driver = { - .owner = THIS_MODULE, - .name = "w83l785ts", - .id = I2C_DRIVERID_W83L785TS, - .flags = I2C_DF_NOTIFY, - .attach_adapter = w83l785ts_attach_adapter, - .detach_client = w83l785ts_detach_client, -}; - -/* - * Client data (each client gets its own) - */ - -struct w83l785ts_data { - struct i2c_client client; - struct semaphore update_lock; - char valid; /* zero until following fields are valid */ - unsigned long last_updated; /* in jiffies */ - - /* registers values */ - u8 temp, temp_over; -}; - -/* - * Sysfs stuff - */ - -static ssize_t show_temp(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct w83l785ts_data *data = w83l785ts_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp)); -} - -static ssize_t show_temp_over(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct w83l785ts_data *data = w83l785ts_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over)); -} - -static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL); -static DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_over, NULL); - -/* - * Real code - */ - -static int w83l785ts_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, w83l785ts_detect); -} - -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct w83l785ts_data *data; - int err = 0; - - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kmalloc(sizeof(struct w83l785ts_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - memset(data, 0, sizeof(struct w83l785ts_data)); - - - /* The common I2C client data is placed right before the - * W83L785TS-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &w83l785ts_driver; - new_client->flags = 0; - - /* - * Now we do the remaining detection. A negative kind means that - * the driver was loaded with no force parameter (default), so we - * must both detect and identify the chip (actually there is only - * one possible kind of chip for now, W83L785TS-S). A zero kind means - * that the driver was loaded with the force parameter, the detection - * step shall be skipped. A positive kind means that the driver - * was loaded with the force parameter and a given kind of chip is - * requested, so both the detection and the identification steps - * are skipped. - */ - if (kind < 0) { /* detection */ - if (((w83l785ts_read_value(new_client, - W83L785TS_REG_CONFIG, 0) & 0x80) != 0x00) - || ((w83l785ts_read_value(new_client, - W83L785TS_REG_TYPE, 0) & 0xFC) != 0x00)) { - dev_dbg(&adapter->dev, - "W83L785TS-S detection failed at 0x%02x.\n", - address); - goto exit_free; - } - } - - if (kind <= 0) { /* identification */ - u16 man_id; - u8 chip_id; - - man_id = (w83l785ts_read_value(new_client, - W83L785TS_REG_MAN_ID1, 0) << 8) + - w83l785ts_read_value(new_client, - W83L785TS_REG_MAN_ID2, 0); - chip_id = w83l785ts_read_value(new_client, - W83L785TS_REG_CHIP_ID, 0); - - if (man_id == 0x5CA3) { /* Winbond */ - if (chip_id == 0x70) { /* W83L785TS-S */ - kind = w83l785ts; - } - } - - if (kind <= 0) { /* identification failed */ - dev_info(&adapter->dev, - "Unsupported chip (man_id=0x%04X, " - "chip_id=0x%02X).\n", man_id, chip_id); - goto exit_free; - } - } - - /* We can fill in the remaining client fields. */ - strlcpy(new_client->name, "w83l785ts", I2C_NAME_SIZE); - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Default values in case the first read fails (unlikely). */ - data->temp_over = data->temp = 0; - - /* Tell the I2C layer a new client has arrived. */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - - /* - * Initialize the W83L785TS chip - * Nothing yet, assume it is already started. - */ - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - - return 0; - -exit_free: - kfree(data); -exit: - return err; -} - -static int w83l785ts_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } - - kfree(i2c_get_clientdata(client)); - return 0; -} - -static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval) -{ - int value, i; - - /* Frequent read errors have been reported on Asus boards, so we - * retry on read errors. If it still fails (unlikely), return the - * default value requested by the caller. */ - for (i = 1; i <= MAX_RETRIES; i++) { - value = i2c_smbus_read_byte_data(client, reg); - if (value >= 0) { - dev_dbg(&client->dev, "Read 0x%02x from register " - "0x%02x.\n", value, reg); - return value; - } - dev_dbg(&client->dev, "Read failed, will retry in %d.\n", i); - msleep(i); - } - - dev_err(&client->dev, "Couldn't read value from register 0x%02x. " - "Please report.\n", reg); - return defval; -} - -static struct w83l785ts_data *w83l785ts_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct w83l785ts_data *data = i2c_get_clientdata(client); - - down(&data->update_lock); - - if (!data->valid || time_after(jiffies, data->last_updated + HZ * 2)) { - dev_dbg(&client->dev, "Updating w83l785ts data.\n"); - data->temp = w83l785ts_read_value(client, - W83L785TS_REG_TEMP, data->temp); - data->temp_over = w83l785ts_read_value(client, - W83L785TS_REG_TEMP_OVER, data->temp_over); - - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static int __init sensors_w83l785ts_init(void) -{ - return i2c_add_driver(&w83l785ts_driver); -} - -static void __exit sensors_w83l785ts_exit(void) -{ - i2c_del_driver(&w83l785ts_driver); -} - -MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); -MODULE_DESCRIPTION("W83L785TS-S driver"); -MODULE_LICENSE("GPL"); - -module_init(sensors_w83l785ts_init); -module_exit(sensors_w83l785ts_exit); |