summaryrefslogtreecommitdiff
path: root/drivers/media/video/em28xx
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/video/em28xx')
-rw-r--r--drivers/media/video/em28xx/em28xx-cards.c80
-rw-r--r--drivers/media/video/em28xx/em28xx-core.c19
-rw-r--r--drivers/media/video/em28xx/em28xx-dvb.c3
-rw-r--r--drivers/media/video/em28xx/em28xx-input.c113
-rw-r--r--drivers/media/video/em28xx/em28xx-reg.h4
-rw-r--r--drivers/media/video/em28xx/em28xx-vbi.c17
-rw-r--r--drivers/media/video/em28xx/em28xx-video.c58
-rw-r--r--drivers/media/video/em28xx/em28xx.h6
8 files changed, 234 insertions, 66 deletions
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 25100001ffff..ecbcefb08739 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -232,6 +232,12 @@ static struct em28xx_reg_seq vc211a_enable[] = {
{ -1, -1, -1, -1},
};
+static struct em28xx_reg_seq dikom_dk300_digital[] = {
+ {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
+ {EM2880_R04_GPO, 0x08, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
/*
* Board definitions
@@ -461,21 +467,30 @@ struct em28xx_board em28xx_boards[] = {
.name = "Leadtek Winfast USB II Deluxe",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
- .tda9887_conf = TDA9887_PRESENT,
+ .has_ir_i2c = 1,
+ .tvaudio_addr = 0x58,
+ .tda9887_conf = TDA9887_PRESENT |
+ TDA9887_PORT2_ACTIVE |
+ TDA9887_QSS,
.decoder = EM28XX_SAA711X,
+ .adecoder = EM28XX_TVAUDIO,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
- .vmux = SAA7115_COMPOSITE2,
- .amux = EM28XX_AMUX_VIDEO,
+ .vmux = SAA7115_COMPOSITE4,
+ .amux = EM28XX_AMUX_AUX,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
- .vmux = SAA7115_COMPOSITE0,
+ .vmux = SAA7115_COMPOSITE5,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
- .vmux = SAA7115_COMPOSITE0,
+ .vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
+ .radio = {
+ .type = EM28XX_RADIO,
+ .amux = EM28XX_AMUX_AUX,
+ }
},
[EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
.name = "Videology 20K14XUSB USB2.0",
@@ -730,11 +745,12 @@ struct em28xx_board em28xx_boards[] = {
[EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
.name = "Terratec Hybrid XS Secam",
- .valid = EM28XX_BOARD_NOT_VALIDATED,
.has_msp34xx = 1,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
+ .has_dvb = 1,
+ .dvb_gpio = default_digital,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
@@ -1265,6 +1281,7 @@ struct em28xx_board em28xx_boards[] = {
.decoder = EM28XX_SAA711X,
.has_dvb = 1,
.dvb_gpio = em2882_kworld_315u_digital,
+ .ir_codes = &ir_codes_kworld_315u_table,
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
/* Analog mode - still not ready */
@@ -1431,6 +1448,21 @@ struct em28xx_board em28xx_boards[] = {
.gpio = hauppauge_wintv_hvr_900_analog,
} },
},
+ [EM2882_BOARD_DIKOM_DK300] = {
+ .name = "Dikom DK300",
+ .tuner_type = TUNER_XC2028,
+ .tuner_gpio = default_tuner_gpio,
+ .decoder = EM28XX_TVP5150,
+ .mts_firmware = 1,
+ .has_dvb = 1,
+ .dvb_gpio = dikom_dk300_digital,
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = default_analog,
+ } },
+ },
[EM2883_BOARD_KWORLD_HYBRID_330U] = {
.name = "Kworld PlusTV HD Hybrid 330",
.tuner_type = TUNER_XC2028,
@@ -1751,6 +1783,7 @@ static struct em28xx_hash_table em28xx_eeprom_hash[] = {
{0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
{0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
{0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
+ {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028},
};
/* I2C devicelist hash table for devices with generic USB IDs */
@@ -2103,6 +2136,7 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
ctl->demod = XC3028_FE_DEFAULT;
break;
case EM2883_BOARD_KWORLD_HYBRID_330U:
+ case EM2882_BOARD_DIKOM_DK300:
ctl->demod = XC3028_FE_CHINA;
ctl->fname = XC2028_DEFAULT_FIRMWARE;
break;
@@ -2259,9 +2293,12 @@ static int em28xx_hint_board(struct em28xx *dev)
/* ----------------------------------------------------------------------- */
void em28xx_register_i2c_ir(struct em28xx *dev)
{
+ /* Leadtek winfast tv USBII deluxe can find a non working IR-device */
+ /* at address 0x18, so if that address is needed for another board in */
+ /* the future, please put it after 0x1f. */
struct i2c_board_info info;
const unsigned short addr_list[] = {
- 0x30, 0x47, I2C_CLIENT_END
+ 0x1f, 0x30, 0x47, I2C_CLIENT_END
};
if (disable_ir)
@@ -2288,6 +2325,10 @@ void em28xx_register_i2c_ir(struct em28xx *dev)
dev->init_data.ir_codes = &ir_codes_rc5_hauppauge_new_table;
dev->init_data.get_key = em28xx_get_key_em_haup;
dev->init_data.name = "i2c IR (EM2840 Hauppauge)";
+ case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE:
+ dev->init_data.ir_codes = &ir_codes_winfast_usbii_deluxe_table;;
+ dev->init_data.get_key = em28xx_get_key_winfast_usbii_deluxe;
+ dev->init_data.name = "i2c IR (EM2820 Winfast TV USBII Deluxe)";
break;
}
@@ -2381,6 +2422,31 @@ void em28xx_card_setup(struct em28xx *dev)
em28xx_gpio_set(dev, dev->board.tuner_gpio);
em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
break;
+
+/*
+ * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR.
+ *
+ * This occurs because they share identical USB vendor and
+ * product IDs.
+ *
+ * What we do here is look up the EEPROM hash of the Dikom
+ * and if it is found then we decide that we do not have
+ * a Kworld and reset the device to the Dikom instead.
+ *
+ * This solution is only valid if they do not share eeprom
+ * hash identities which has not been determined as yet.
+ */
+ case EM2882_BOARD_KWORLD_VS_DVBT:
+ if (!em28xx_hint_board(dev))
+ em28xx_set_model(dev);
+
+ /* In cases where we had to use a board hint, the call to
+ em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
+ so make the call now so the analog GPIOs are set properly
+ before probing the i2c bus. */
+ em28xx_gpio_set(dev, dev->board.tuner_gpio);
+ em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
+ break;
}
#if defined(CONFIG_MODULES) && defined(MODULE)
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index b311d4514bdf..5a37eccbd7d6 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -691,9 +691,15 @@ int em28xx_set_outfmt(struct em28xx *dev)
if (em28xx_vbi_supported(dev) == 1) {
vinctrl |= EM28XX_VINCTRL_VBI_RAW;
em28xx_write_reg(dev, EM28XX_R34_VBI_START_H, 0x00);
- em28xx_write_reg(dev, EM28XX_R35_VBI_START_V, 0x09);
- em28xx_write_reg(dev, EM28XX_R36_VBI_WIDTH, 0xb4);
- em28xx_write_reg(dev, EM28XX_R37_VBI_HEIGHT, 0x0c);
+ em28xx_write_reg(dev, EM28XX_R36_VBI_WIDTH, dev->vbi_width/4);
+ em28xx_write_reg(dev, EM28XX_R37_VBI_HEIGHT, dev->vbi_height);
+ if (dev->norm & V4L2_STD_525_60) {
+ /* NTSC */
+ em28xx_write_reg(dev, EM28XX_R35_VBI_START_V, 0x09);
+ } else if (dev->norm & V4L2_STD_625_50) {
+ /* PAL */
+ em28xx_write_reg(dev, EM28XX_R35_VBI_START_V, 0x07);
+ }
}
return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, vinctrl);
@@ -760,6 +766,13 @@ int em28xx_resolution_set(struct em28xx *dev)
width = norm_maxw(dev);
height = norm_maxh(dev);
+ /* Properly setup VBI */
+ dev->vbi_width = 720;
+ if (dev->norm & V4L2_STD_525_60)
+ dev->vbi_height = 12;
+ else
+ dev->vbi_height = 18;
+
if (!dev->progressive)
height >>= norm_maxh(dev);
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index cc0505eb900f..1b96356b3ab2 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -502,7 +502,9 @@ static int dvb_init(struct em28xx *dev)
}
break;
case EM2880_BOARD_TERRATEC_HYBRID_XS:
+ case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
case EM2881_BOARD_PINNACLE_HYBRID_PRO:
+ case EM2882_BOARD_DIKOM_DK300:
dvb->frontend = dvb_attach(zl10353_attach,
&em28xx_zl10353_xc3028_no_i2c_gate,
&dev->i2c_adap);
@@ -606,6 +608,7 @@ static int dvb_fini(struct em28xx *dev)
if (dev->dvb) {
unregister_dvb(dev->dvb);
+ kfree(dev->dvb);
dev->dvb = NULL;
}
diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c
index af0d935c29be..1fb754e20875 100644
--- a/drivers/media/video/em28xx/em28xx-input.c
+++ b/drivers/media/video/em28xx/em28xx-input.c
@@ -75,6 +75,10 @@ struct em28xx_IR {
unsigned int repeat_interval;
int (*get_key)(struct em28xx_IR *, struct em28xx_ir_poll_result *);
+
+ /* IR device properties */
+
+ struct ir_dev_props props;
};
/**********************************************************
@@ -180,6 +184,36 @@ int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key,
return 1;
}
+int em28xx_get_key_winfast_usbii_deluxe(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
+{
+ unsigned char subaddr, keydetect, key;
+
+ struct i2c_msg msg[] = { { .addr = ir->c->addr, .flags = 0, .buf = &subaddr, .len = 1},
+
+ { .addr = ir->c->addr, .flags = I2C_M_RD, .buf = &keydetect, .len = 1} };
+
+ subaddr = 0x10;
+ if (2 != i2c_transfer(ir->c->adapter, msg, 2)) {
+ i2cdprintk("read error\n");
+ return -EIO;
+ }
+ if (keydetect == 0x00)
+ return 0;
+
+ subaddr = 0x00;
+ msg[1].buf = &key;
+ if (2 != i2c_transfer(ir->c->adapter, msg, 2)) {
+ i2cdprintk("read error\n");
+ return -EIO;
+ }
+ if (key == 0x00)
+ return 0;
+
+ *ir_key = key;
+ *ir_raw = key;
+ return 1;
+}
+
/**********************************************************
Poll based get keycode functions
**********************************************************/
@@ -336,35 +370,28 @@ static void em28xx_ir_stop(struct em28xx_IR *ir)
cancel_delayed_work_sync(&ir->work);
}
-int em28xx_ir_init(struct em28xx *dev)
+int em28xx_ir_change_protocol(void *priv, u64 ir_type)
{
- struct em28xx_IR *ir;
- struct input_dev *input_dev;
- u8 ir_config;
- int err = -ENOMEM;
-
- if (dev->board.ir_codes == NULL) {
- /* No remote control support */
- return 0;
- }
-
- ir = kzalloc(sizeof(*ir), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!ir || !input_dev)
- goto err_out_free;
-
- ir->input = input_dev;
- ir_config = EM2874_IR_RC5;
+ int rc = 0;
+ struct em28xx_IR *ir = priv;
+ struct em28xx *dev = ir->dev;
+ u8 ir_config = EM2874_IR_RC5;
/* Adjust xclk based o IR table for RC5/NEC tables */
- if (dev->board.ir_codes->ir_type == IR_TYPE_RC5) {
+
+ dev->board.ir_codes->ir_type = IR_TYPE_OTHER;
+ if (ir_type == IR_TYPE_RC5) {
dev->board.xclk |= EM28XX_XCLK_IR_RC5_MODE;
ir->full_code = 1;
- } else if (dev->board.ir_codes->ir_type == IR_TYPE_NEC) {
+ } else if (ir_type == IR_TYPE_NEC) {
dev->board.xclk &= ~EM28XX_XCLK_IR_RC5_MODE;
ir_config = EM2874_IR_NEC;
ir->full_code = 1;
- }
+ } else
+ rc = -EINVAL;
+
+ dev->board.ir_codes->ir_type = ir_type;
+
em28xx_write_reg_bits(dev, EM28XX_R0F_XCLK, dev->board.xclk,
EM28XX_XCLK_IR_RC5_MODE);
@@ -380,9 +407,42 @@ int em28xx_ir_init(struct em28xx *dev)
break;
default:
printk("Unrecognized em28xx chip id: IR not supported\n");
- goto err_out_free;
+ rc = -EINVAL;
+ }
+
+ return rc;
+}
+
+int em28xx_ir_init(struct em28xx *dev)
+{
+ struct em28xx_IR *ir;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
+
+ if (dev->board.ir_codes == NULL) {
+ /* No remote control support */
+ return 0;
}
+ ir = kzalloc(sizeof(*ir), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ir || !input_dev)
+ goto err_out_free;
+
+ /* record handles to ourself */
+ ir->dev = dev;
+ dev->ir = ir;
+
+ ir->input = input_dev;
+
+ /*
+ * em2874 supports more protocols. For now, let's just announce
+ * the two protocols that were already tested
+ */
+ ir->props.allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC;
+ ir->props.priv = ir;
+ ir->props.change_protocol = em28xx_ir_change_protocol;
+
/* This is how often we ask the chip for IR information */
ir->polling = 100; /* ms */
@@ -393,6 +453,8 @@ int em28xx_ir_init(struct em28xx *dev)
usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
strlcat(ir->phys, "/input0", sizeof(ir->phys));
+ /* Set IR protocol */
+ em28xx_ir_change_protocol(ir, dev->board.ir_codes->ir_type);
err = ir_input_init(input_dev, &ir->ir, IR_TYPE_OTHER);
if (err < 0)
goto err_out_free;
@@ -405,14 +467,13 @@ int em28xx_ir_init(struct em28xx *dev)
input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
input_dev->dev.parent = &dev->udev->dev;
- /* record handles to ourself */
- ir->dev = dev;
- dev->ir = ir;
+
em28xx_ir_start(ir);
/* all done */
- err = ir_input_register(ir->input, dev->board.ir_codes);
+ err = ir_input_register(ir->input, dev->board.ir_codes,
+ &ir->props);
if (err)
goto err_out_stop;
diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h
index 058ac87639ce..91e90559642b 100644
--- a/drivers/media/video/em28xx/em28xx-reg.h
+++ b/drivers/media/video/em28xx/em28xx-reg.h
@@ -173,8 +173,8 @@
/* em2874 IR config register (0x50) */
#define EM2874_IR_NEC 0x00
#define EM2874_IR_RC5 0x04
-#define EM2874_IR_RC5_MODE_0 0x08
-#define EM2874_IR_RC5_MODE_6A 0x0b
+#define EM2874_IR_RC6_MODE_0 0x08
+#define EM2874_IR_RC6_MODE_6A 0x0b
/* em2874 Transport Stream Enable Register (0x5f) */
#define EM2874_TS1_CAPTURE_ENABLE (1 << 0)
diff --git a/drivers/media/video/em28xx/em28xx-vbi.c b/drivers/media/video/em28xx/em28xx-vbi.c
index 94943e5a1529..c7dce39823d8 100644
--- a/drivers/media/video/em28xx/em28xx-vbi.c
+++ b/drivers/media/video/em28xx/em28xx-vbi.c
@@ -71,7 +71,11 @@ free_buffer(struct videobuf_queue *vq, struct em28xx_buffer *buf)
static int
vbi_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size)
{
- *size = 720 * 12 * 2;
+ struct em28xx_fh *fh = q->priv_data;
+ struct em28xx *dev = fh->dev;
+
+ *size = dev->vbi_width * dev->vbi_height * 2;
+
if (0 == *count)
*count = vbibufs;
if (*count < 2)
@@ -85,19 +89,18 @@ static int
vbi_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
enum v4l2_field field)
{
+ struct em28xx_fh *fh = q->priv_data;
+ struct em28xx *dev = fh->dev;
struct em28xx_buffer *buf = container_of(vb, struct em28xx_buffer, vb);
int rc = 0;
- unsigned int size;
-
- size = 720 * 12 * 2;
- buf->vb.size = size;
+ buf->vb.size = dev->vbi_width * dev->vbi_height * 2;
if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size)
return -EINVAL;
- buf->vb.width = 720;
- buf->vb.height = 12;
+ buf->vb.width = dev->vbi_width;
+ buf->vb.height = dev->vbi_height;
buf->vb.field = field;
if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 849b18c94037..ac2bd935927e 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -282,7 +282,7 @@ static void em28xx_copy_vbi(struct em28xx *dev,
{
void *startwrite, *startread;
int offset;
- int bytesperline = 720;
+ int bytesperline = dev->vbi_width;
if (dev == NULL) {
em28xx_isocdbg("dev is null\n");
@@ -323,8 +323,8 @@ static void em28xx_copy_vbi(struct em28xx *dev,
/* Make sure the bottom field populates the second half of the frame */
if (buf->top_field == 0) {
- startwrite += bytesperline * 0x0c;
- offset += bytesperline * 0x0c;
+ startwrite += bytesperline * dev->vbi_height;
+ offset += bytesperline * dev->vbi_height;
}
memcpy(startwrite, startread, len);
@@ -578,8 +578,7 @@ static inline int em28xx_isoc_copy_vbi(struct em28xx *dev, struct urb *urb)
dev->cur_field = p[2];
}
- /* FIXME: get rid of hard-coded value */
- vbi_size = 720 * 0x0c;
+ vbi_size = dev->vbi_width * dev->vbi_height;
if (dev->capture_type == 0) {
if (dev->vbi_read >= vbi_size) {
@@ -1850,18 +1849,27 @@ static int vidioc_try_set_sliced_vbi_cap(struct file *file, void *priv,
static int vidioc_g_fmt_vbi_cap(struct file *file, void *priv,
struct v4l2_format *format)
{
- format->fmt.vbi.samples_per_line = 720;
+ struct em28xx_fh *fh = priv;
+ struct em28xx *dev = fh->dev;
+
+ format->fmt.vbi.samples_per_line = dev->vbi_width;
format->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY;
format->fmt.vbi.offset = 0;
format->fmt.vbi.flags = 0;
+ format->fmt.vbi.sampling_rate = 6750000 * 4 / 2;
+ format->fmt.vbi.count[0] = dev->vbi_height;
+ format->fmt.vbi.count[1] = dev->vbi_height;
/* Varies by video standard (NTSC, PAL, etc.) */
- /* FIXME: hard-coded for NTSC support */
- format->fmt.vbi.sampling_rate = 6750000 * 4 / 2; /* FIXME: ??? */
- format->fmt.vbi.count[0] = 12;
- format->fmt.vbi.count[1] = 12;
- format->fmt.vbi.start[0] = 10;
- format->fmt.vbi.start[1] = 273;
+ if (dev->norm & V4L2_STD_525_60) {
+ /* NTSC */
+ format->fmt.vbi.start[0] = 10;
+ format->fmt.vbi.start[1] = 273;
+ } else if (dev->norm & V4L2_STD_625_50) {
+ /* PAL */
+ format->fmt.vbi.start[0] = 6;
+ format->fmt.vbi.start[1] = 318;
+ }
return 0;
}
@@ -1869,18 +1877,27 @@ static int vidioc_g_fmt_vbi_cap(struct file *file, void *priv,
static int vidioc_s_fmt_vbi_cap(struct file *file, void *priv,
struct v4l2_format *format)
{
- format->fmt.vbi.samples_per_line = 720;
+ struct em28xx_fh *fh = priv;
+ struct em28xx *dev = fh->dev;
+
+ format->fmt.vbi.samples_per_line = dev->vbi_width;
format->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY;
format->fmt.vbi.offset = 0;
format->fmt.vbi.flags = 0;
+ format->fmt.vbi.sampling_rate = 6750000 * 4 / 2;
+ format->fmt.vbi.count[0] = dev->vbi_height;
+ format->fmt.vbi.count[1] = dev->vbi_height;
/* Varies by video standard (NTSC, PAL, etc.) */
- /* FIXME: hard-coded for NTSC support */
- format->fmt.vbi.sampling_rate = 6750000 * 4 / 2; /* FIXME: ??? */
- format->fmt.vbi.count[0] = 12;
- format->fmt.vbi.count[1] = 12;
- format->fmt.vbi.start[0] = 10;
- format->fmt.vbi.start[1] = 273;
+ if (dev->norm & V4L2_STD_525_60) {
+ /* NTSC */
+ format->fmt.vbi.start[0] = 10;
+ format->fmt.vbi.start[1] = 273;
+ } else if (dev->norm & V4L2_STD_625_50) {
+ /* PAL */
+ format->fmt.vbi.start[0] = 6;
+ format->fmt.vbi.start[1] = 318;
+ }
return 0;
}
@@ -1922,7 +1939,8 @@ static int vidioc_querybuf(struct file *file, void *priv,
At a minimum, it causes a crash in zvbi since it does
a memcpy based on the source buffer length */
int result = videobuf_querybuf(&fh->vb_vbiq, b);
- b->length = 17280;
+ b->length = dev->vbi_width * dev->vbi_height * 2;
+
return result;
}
}
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 80d9b4fa1b97..ba6fe5daff84 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -111,6 +111,7 @@
#define EM2861_BOARD_GADMEI_UTV330PLUS 72
#define EM2870_BOARD_REDDO_DVB_C_USB_BOX 73
#define EM2800_BOARD_VC211A 74
+#define EM2882_BOARD_DIKOM_DK300 75
/* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4
@@ -552,7 +553,8 @@ struct em28xx {
int capture_type;
int vbi_read;
unsigned char cur_field;
-
+ unsigned int vbi_width;
+ unsigned int vbi_height; /* lines per field */
struct work_struct request_module_wk;
@@ -693,6 +695,8 @@ int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw);
int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw);
int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key,
u32 *ir_raw);
+int em28xx_get_key_winfast_usbii_deluxe(struct IR_i2c *ir, u32 *ir_key,
+ u32 *ir_raw);
void em28xx_register_snapshot_button(struct em28xx *dev);
void em28xx_deregister_snapshot_button(struct em28xx *dev);
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-15 17:50:53 +0000