diff options
Diffstat (limited to 'drivers/phy')
| -rw-r--r-- | drivers/phy/phy-twl4030-usb.c | 13 |
1 files changed, 8 insertions, 5 deletions
diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c index 79870c4ff731..f96065a81d1e 100644 --- a/drivers/phy/phy-twl4030-usb.c +++ b/drivers/phy/phy-twl4030-usb.c @@ -715,6 +715,7 @@ static int twl4030_usb_probe(struct platform_device *pdev) pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_set_autosuspend_delay(&pdev->dev, 2000); pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); /* Our job is to use irqs and status from the power module * to keep the transceiver disabled when nothing's connected. @@ -758,6 +759,13 @@ static int twl4030_usb_remove(struct platform_device *pdev) /* set transceiver mode to power on defaults */ twl4030_usb_set_mode(twl, -1); + /* idle ulpi before powering off */ + if (cable_present(twl->linkstat)) + pm_runtime_put_noidle(twl->dev); + pm_runtime_mark_last_busy(twl->dev); + pm_runtime_put_sync_suspend(twl->dev); + pm_runtime_disable(twl->dev); + /* autogate 60MHz ULPI clock, * clear dpll clock request for i2c access, * disable 32KHz @@ -772,11 +780,6 @@ static int twl4030_usb_remove(struct platform_device *pdev) /* disable complete OTG block */ twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB); - if (cable_present(twl->linkstat)) - pm_runtime_put_noidle(twl->dev); - pm_runtime_mark_last_busy(twl->dev); - pm_runtime_put(twl->dev); - return 0; } |