diff options
Diffstat (limited to 'drivers/staging/ath6kl/os/linux/ar6000_drv.c')
-rw-r--r-- | drivers/staging/ath6kl/os/linux/ar6000_drv.c | 6267 |
1 files changed, 0 insertions, 6267 deletions
diff --git a/drivers/staging/ath6kl/os/linux/ar6000_drv.c b/drivers/staging/ath6kl/os/linux/ar6000_drv.c deleted file mode 100644 index 32ee39ad00df..000000000000 --- a/drivers/staging/ath6kl/os/linux/ar6000_drv.c +++ /dev/null @@ -1,6267 +0,0 @@ -//------------------------------------------------------------------------------ -// Copyright (c) 2004-2010 Atheros Communications Inc. -// All rights reserved. -// -// -// -// Permission to use, copy, modify, and/or distribute this software for any -// purpose with or without fee is hereby granted, provided that the above -// copyright notice and this permission notice appear in all copies. -// -// THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -// WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -// MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -// ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -// WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -// ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF -// OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -// -// -// -// Author(s): ="Atheros" -//------------------------------------------------------------------------------ - -/* - * This driver is a pseudo ethernet driver to access the Atheros AR6000 - * WLAN Device - */ - -#include "ar6000_drv.h" -#include "cfg80211.h" -#include "htc.h" -#include "wmi_filter_linux.h" -#include "epping_test.h" -#include "wlan_config.h" -#include "ar3kconfig.h" -#include "ar6k_pal.h" -#include "AR6002/addrs.h" - - -/* LINUX_HACK_FUDGE_FACTOR -- this is used to provide a workaround for linux behavior. When - * the meta data was added to the header it was found that linux did not correctly provide - * enough headroom. However when more headroom was requested beyond what was truly needed - * Linux gave the requested headroom. Therefore to get the necessary headroom from Linux - * the driver requests more than is needed by the amount = LINUX_HACK_FUDGE_FACTOR */ -#define LINUX_HACK_FUDGE_FACTOR 16 -#define BDATA_BDADDR_OFFSET 28 - -u8 bcast_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; -u8 null_mac[] = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0}; - -#ifdef DEBUG - -#define ATH_DEBUG_DBG_LOG ATH_DEBUG_MAKE_MODULE_MASK(0) -#define ATH_DEBUG_WLAN_CONNECT ATH_DEBUG_MAKE_MODULE_MASK(1) -#define ATH_DEBUG_WLAN_SCAN ATH_DEBUG_MAKE_MODULE_MASK(2) -#define ATH_DEBUG_WLAN_TX ATH_DEBUG_MAKE_MODULE_MASK(3) -#define ATH_DEBUG_WLAN_RX ATH_DEBUG_MAKE_MODULE_MASK(4) -#define ATH_DEBUG_HTC_RAW ATH_DEBUG_MAKE_MODULE_MASK(5) -#define ATH_DEBUG_HCI_BRIDGE ATH_DEBUG_MAKE_MODULE_MASK(6) - -static struct ath_debug_mask_description driver_debug_desc[] = { - { ATH_DEBUG_DBG_LOG , "Target Debug Logs"}, - { ATH_DEBUG_WLAN_CONNECT , "WLAN connect"}, - { ATH_DEBUG_WLAN_SCAN , "WLAN scan"}, - { ATH_DEBUG_WLAN_TX , "WLAN Tx"}, - { ATH_DEBUG_WLAN_RX , "WLAN Rx"}, - { ATH_DEBUG_HTC_RAW , "HTC Raw IF tracing"}, - { ATH_DEBUG_HCI_BRIDGE , "HCI Bridge Setup"}, - { ATH_DEBUG_HCI_RECV , "HCI Recv tracing"}, - { ATH_DEBUG_HCI_DUMP , "HCI Packet dumps"}, -}; - -ATH_DEBUG_INSTANTIATE_MODULE_VAR(driver, - "driver", - "Linux Driver Interface", - ATH_DEBUG_MASK_DEFAULTS | ATH_DEBUG_WLAN_SCAN | - ATH_DEBUG_HCI_BRIDGE, - ATH_DEBUG_DESCRIPTION_COUNT(driver_debug_desc), - driver_debug_desc); - -#endif - - -#define IS_MAC_NULL(mac) (mac[0]==0 && mac[1]==0 && mac[2]==0 && mac[3]==0 && mac[4]==0 && mac[5]==0) -#define IS_MAC_BCAST(mac) (*mac==0xff) - -#define DESCRIPTION "Driver to access the Atheros AR600x Device, version " __stringify(__VER_MAJOR_) "." __stringify(__VER_MINOR_) "." __stringify(__VER_PATCH_) "." __stringify(__BUILD_NUMBER_) - -MODULE_AUTHOR("Atheros Communications, Inc."); -MODULE_DESCRIPTION(DESCRIPTION); -MODULE_LICENSE("Dual BSD/GPL"); - -#ifndef REORG_APTC_HEURISTICS -#undef ADAPTIVE_POWER_THROUGHPUT_CONTROL -#endif /* REORG_APTC_HEURISTICS */ - -#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL -#define APTC_TRAFFIC_SAMPLING_INTERVAL 100 /* msec */ -#define APTC_UPPER_THROUGHPUT_THRESHOLD 3000 /* Kbps */ -#define APTC_LOWER_THROUGHPUT_THRESHOLD 2000 /* Kbps */ - -typedef struct aptc_traffic_record { - bool timerScheduled; - struct timeval samplingTS; - unsigned long bytesReceived; - unsigned long bytesTransmitted; -} APTC_TRAFFIC_RECORD; - -A_TIMER aptcTimer; -APTC_TRAFFIC_RECORD aptcTR; -#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ - -#ifdef EXPORT_HCI_BRIDGE_INTERFACE -// callbacks registered by HCI transport driver -struct hci_transport_callbacks ar6kHciTransCallbacks = { NULL }; -#endif - -unsigned int processDot11Hdr = 0; - -char ifname[IFNAMSIZ] = {0,}; - -int wlaninitmode = WLAN_INIT_MODE_DEFAULT; -static bool bypasswmi; -unsigned int debuglevel = 0; -int tspecCompliance = ATHEROS_COMPLIANCE; -unsigned int busspeedlow = 0; -unsigned int onebitmode = 0; -unsigned int skipflash = 0; -unsigned int wmitimeout = 2; -unsigned int wlanNodeCaching = 1; -unsigned int enableuartprint = ENABLEUARTPRINT_DEFAULT; -unsigned int logWmiRawMsgs = 0; -unsigned int enabletimerwar = 0; -unsigned int num_device = 1; -unsigned int regscanmode; -unsigned int fwmode = 1; -unsigned int mbox_yield_limit = 99; -unsigned int enablerssicompensation = 0; -int reduce_credit_dribble = 1 + HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_ONE_HALF; -int allow_trace_signal = 0; -#ifdef CONFIG_HOST_TCMD_SUPPORT -unsigned int testmode =0; -#endif - -unsigned int irqprocmode = HIF_DEVICE_IRQ_SYNC_ONLY;//HIF_DEVICE_IRQ_ASYNC_SYNC; -unsigned int panic_on_assert = 1; -unsigned int nohifscattersupport = NOHIFSCATTERSUPPORT_DEFAULT; - -unsigned int setuphci = SETUPHCI_DEFAULT; -unsigned int loghci = 0; -unsigned int setupbtdev = SETUPBTDEV_DEFAULT; -#ifndef EXPORT_HCI_BRIDGE_INTERFACE -unsigned int ar3khcibaud = AR3KHCIBAUD_DEFAULT; -unsigned int hciuartscale = HCIUARTSCALE_DEFAULT; -unsigned int hciuartstep = HCIUARTSTEP_DEFAULT; -#endif -unsigned int csumOffload=0; -unsigned int csumOffloadTest=0; -unsigned int eppingtest=0; -unsigned int mac_addr_method; -unsigned int firmware_bridge; - -module_param_string(ifname, ifname, sizeof(ifname), 0644); -module_param(wlaninitmode, int, 0644); -module_param(bypasswmi, bool, 0644); -module_param(debuglevel, uint, 0644); -module_param(tspecCompliance, int, 0644); -module_param(onebitmode, uint, 0644); -module_param(busspeedlow, uint, 0644); -module_param(skipflash, uint, 0644); -module_param(wmitimeout, uint, 0644); -module_param(wlanNodeCaching, uint, 0644); -module_param(logWmiRawMsgs, uint, 0644); -module_param(enableuartprint, uint, 0644); -module_param(enabletimerwar, uint, 0644); -module_param(fwmode, uint, 0644); -module_param(mbox_yield_limit, uint, 0644); -module_param(reduce_credit_dribble, int, 0644); -module_param(allow_trace_signal, int, 0644); -module_param(enablerssicompensation, uint, 0644); -module_param(processDot11Hdr, uint, 0644); -module_param(csumOffload, uint, 0644); -#ifdef CONFIG_HOST_TCMD_SUPPORT -module_param(testmode, uint, 0644); -#endif -module_param(irqprocmode, uint, 0644); -module_param(nohifscattersupport, uint, 0644); -module_param(panic_on_assert, uint, 0644); -module_param(setuphci, uint, 0644); -module_param(loghci, uint, 0644); -module_param(setupbtdev, uint, 0644); -#ifndef EXPORT_HCI_BRIDGE_INTERFACE -module_param(ar3khcibaud, uint, 0644); -module_param(hciuartscale, uint, 0644); -module_param(hciuartstep, uint, 0644); -#endif -module_param(eppingtest, uint, 0644); - -/* in 2.6.10 and later this is now a pointer to a uint */ -unsigned int _mboxnum = HTC_MAILBOX_NUM_MAX; -#define mboxnum &_mboxnum - -#ifdef DEBUG -u32 g_dbg_flags = DBG_DEFAULTS; -unsigned int debugflags = 0; -int debugdriver = 0; -unsigned int debughtc = 0; -unsigned int debugbmi = 0; -unsigned int debughif = 0; -unsigned int txcreditsavailable[HTC_MAILBOX_NUM_MAX] = {0}; -unsigned int txcreditsconsumed[HTC_MAILBOX_NUM_MAX] = {0}; -unsigned int txcreditintrenable[HTC_MAILBOX_NUM_MAX] = {0}; -unsigned int txcreditintrenableaggregate[HTC_MAILBOX_NUM_MAX] = {0}; -module_param(debugflags, uint, 0644); -module_param(debugdriver, int, 0644); -module_param(debughtc, uint, 0644); -module_param(debugbmi, uint, 0644); -module_param(debughif, uint, 0644); -module_param_array(txcreditsavailable, uint, mboxnum, 0644); -module_param_array(txcreditsconsumed, uint, mboxnum, 0644); -module_param_array(txcreditintrenable, uint, mboxnum, 0644); -module_param_array(txcreditintrenableaggregate, uint, mboxnum, 0644); - -#endif /* DEBUG */ - -unsigned int resetok = 1; -unsigned int tx_attempt[HTC_MAILBOX_NUM_MAX] = {0}; -unsigned int tx_post[HTC_MAILBOX_NUM_MAX] = {0}; -unsigned int tx_complete[HTC_MAILBOX_NUM_MAX] = {0}; -unsigned int hifBusRequestNumMax = 40; -unsigned int war23838_disabled = 0; -#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL -unsigned int enableAPTCHeuristics = 1; -#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ -module_param_array(tx_attempt, uint, mboxnum, 0644); -module_param_array(tx_post, uint, mboxnum, 0644); -module_param_array(tx_complete, uint, mboxnum, 0644); -module_param(hifBusRequestNumMax, uint, 0644); -module_param(war23838_disabled, uint, 0644); -module_param(resetok, uint, 0644); -#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL -module_param(enableAPTCHeuristics, uint, 0644); -#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ - -#ifdef BLOCK_TX_PATH_FLAG -int blocktx = 0; -module_param(blocktx, int, 0644); -#endif /* BLOCK_TX_PATH_FLAG */ - -typedef struct user_rssi_compensation_t { - u16 customerID; - union { - u16 a_enable; - u16 bg_enable; - u16 enable; - }; - s16 bg_param_a; - s16 bg_param_b; - s16 a_param_a; - s16 a_param_b; - u32 reserved; -} USER_RSSI_CPENSATION; - -static USER_RSSI_CPENSATION rssi_compensation_param; - -static s16 rssi_compensation_table[96]; - -int reconnect_flag = 0; -static ar6k_pal_config_t ar6k_pal_config_g; - -/* Function declarations */ -static int ar6000_init_module(void); -static void ar6000_cleanup_module(void); - -int ar6000_init(struct net_device *dev); -static int ar6000_open(struct net_device *dev); -static int ar6000_close(struct net_device *dev); -static void ar6000_init_control_info(struct ar6_softc *ar); -static int ar6000_data_tx(struct sk_buff *skb, struct net_device *dev); - -void ar6000_destroy(struct net_device *dev, unsigned int unregister); -static void ar6000_detect_error(unsigned long ptr); -static void ar6000_set_multicast_list(struct net_device *dev); -static struct net_device_stats *ar6000_get_stats(struct net_device *dev); - -static void disconnect_timer_handler(unsigned long ptr); - -void read_rssi_compensation_param(struct ar6_softc *ar); - -/* - * HTC service connection handlers - */ -static int ar6000_avail_ev(void *context, void *hif_handle); - -static int ar6000_unavail_ev(void *context, void *hif_handle); - -int ar6000_configure_target(struct ar6_softc *ar); - -static void ar6000_target_failure(void *Instance, int Status); - -static void ar6000_rx(void *Context, struct htc_packet *pPacket); - -static void ar6000_rx_refill(void *Context,HTC_ENDPOINT_ID Endpoint); - -static void ar6000_tx_complete(void *Context, struct htc_packet_queue *pPackets); - -static HTC_SEND_FULL_ACTION ar6000_tx_queue_full(void *Context, struct htc_packet *pPacket); - -static void ar6000_alloc_netbufs(A_NETBUF_QUEUE_T *q, u16 num); -static void ar6000_deliver_frames_to_nw_stack(void * dev, void *osbuf); -//static void ar6000_deliver_frames_to_bt_stack(void * dev, void *osbuf); - -static struct htc_packet *ar6000_alloc_amsdu_rxbuf(void *Context, HTC_ENDPOINT_ID Endpoint, int Length); - -static void ar6000_refill_amsdu_rxbufs(struct ar6_softc *ar, int Count); - -static void ar6000_cleanup_amsdu_rxbufs(struct ar6_softc *ar); - -static ssize_t -ar6000_sysfs_bmi_read(struct file *fp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t pos, size_t count); - -static ssize_t -ar6000_sysfs_bmi_write(struct file *fp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t pos, size_t count); - -static int -ar6000_sysfs_bmi_init(struct ar6_softc *ar); - -void ar6k_cleanup_hci_pal(struct ar6_softc *ar); - -static void -ar6000_sysfs_bmi_deinit(struct ar6_softc *ar); - -int -ar6000_sysfs_bmi_get_config(struct ar6_softc *ar, u32 mode); - -/* - * Static variables - */ - -struct net_device *ar6000_devices[MAX_AR6000]; -static int is_netdev_registered; -DECLARE_WAIT_QUEUE_HEAD(arEvent); -static void ar6000_cookie_init(struct ar6_softc *ar); -static void ar6000_cookie_cleanup(struct ar6_softc *ar); -static void ar6000_free_cookie(struct ar6_softc *ar, struct ar_cookie * cookie); -static struct ar_cookie *ar6000_alloc_cookie(struct ar6_softc *ar); - -static int ar6000_reinstall_keys(struct ar6_softc *ar,u8 key_op_ctrl); - -#ifdef CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT -struct net_device *arApNetDev; -#endif /* CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT */ - -static struct ar_cookie s_ar_cookie_mem[MAX_COOKIE_NUM]; - -#define HOST_INTEREST_ITEM_ADDRESS(ar, item) \ - (((ar)->arTargetType == TARGET_TYPE_AR6002) ? AR6002_HOST_INTEREST_ITEM_ADDRESS(item) : \ - (((ar)->arTargetType == TARGET_TYPE_AR6003) ? AR6003_HOST_INTEREST_ITEM_ADDRESS(item) : 0)) - - -static struct net_device_ops ar6000_netdev_ops = { - .ndo_init = NULL, - .ndo_open = ar6000_open, - .ndo_stop = ar6000_close, - .ndo_get_stats = ar6000_get_stats, - .ndo_start_xmit = ar6000_data_tx, - .ndo_set_multicast_list = ar6000_set_multicast_list, -}; - -/* Debug log support */ - -/* - * Flag to govern whether the debug logs should be parsed in the kernel - * or reported to the application. - */ -#define REPORT_DEBUG_LOGS_TO_APP - -int -ar6000_set_host_app_area(struct ar6_softc *ar) -{ - u32 address, data; - struct host_app_area_s host_app_area; - - /* Fetch the address of the host_app_area_s instance in the host interest area */ - address = TARG_VTOP(ar->arTargetType, HOST_INTEREST_ITEM_ADDRESS(ar, hi_app_host_interest)); - if (ar6000_ReadRegDiag(ar->arHifDevice, &address, &data) != 0) { - return A_ERROR; - } - address = TARG_VTOP(ar->arTargetType, data); - host_app_area.wmi_protocol_ver = WMI_PROTOCOL_VERSION; - if (ar6000_WriteDataDiag(ar->arHifDevice, address, - (u8 *)&host_app_area, - sizeof(struct host_app_area_s)) != 0) - { - return A_ERROR; - } - - return 0; -} - -u32 dbglog_get_debug_hdr_ptr(struct ar6_softc *ar) -{ - u32 param; - u32 address; - int status; - - address = TARG_VTOP(ar->arTargetType, HOST_INTEREST_ITEM_ADDRESS(ar, hi_dbglog_hdr)); - if ((status = ar6000_ReadDataDiag(ar->arHifDevice, address, - (u8 *)¶m, 4)) != 0) - { - param = 0; - } - - return param; -} - -/* - * The dbglog module has been initialized. Its ok to access the relevant - * data stuctures over the diagnostic window. - */ -void -ar6000_dbglog_init_done(struct ar6_softc *ar) -{ - ar->dbglog_init_done = true; -} - -u32 dbglog_get_debug_fragment(s8 *datap, u32 len, u32 limit) -{ - s32 *buffer; - u32 count; - u32 numargs; - u32 length; - u32 fraglen; - - count = fraglen = 0; - buffer = (s32 *)datap; - length = (limit >> 2); - - if (len <= limit) { - fraglen = len; - } else { - while (count < length) { - numargs = DBGLOG_GET_NUMARGS(buffer[count]); - fraglen = (count << 2); - count += numargs + 1; - } - } - - return fraglen; -} - -void -dbglog_parse_debug_logs(s8 *datap, u32 len) -{ - s32 *buffer; - u32 count; - u32 timestamp; - u32 debugid; - u32 moduleid; - u32 numargs; - u32 length; - - count = 0; - buffer = (s32 *)datap; - length = (len >> 2); - while (count < length) { - debugid = DBGLOG_GET_DBGID(buffer[count]); - moduleid = DBGLOG_GET_MODULEID(buffer[count]); - numargs = DBGLOG_GET_NUMARGS(buffer[count]); - timestamp = DBGLOG_GET_TIMESTAMP(buffer[count]); - switch (numargs) { - case 0: - AR_DEBUG_PRINTF(ATH_DEBUG_DBG_LOG,("%d %d (%d)\n", moduleid, debugid, timestamp)); - break; - - case 1: - AR_DEBUG_PRINTF(ATH_DEBUG_DBG_LOG,("%d %d (%d): 0x%x\n", moduleid, debugid, - timestamp, buffer[count+1])); - break; - - case 2: - AR_DEBUG_PRINTF(ATH_DEBUG_DBG_LOG,("%d %d (%d): 0x%x, 0x%x\n", moduleid, debugid, - timestamp, buffer[count+1], buffer[count+2])); - break; - - default: - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Invalid args: %d\n", numargs)); - } - count += numargs + 1; - } -} - -int -ar6000_dbglog_get_debug_logs(struct ar6_softc *ar) -{ - u32 data[8]; /* Should be able to accommodate struct dbglog_buf_s */ - u32 address; - u32 length; - u32 dropped; - u32 firstbuf; - u32 debug_hdr_ptr; - - if (!ar->dbglog_init_done) return A_ERROR; - - - AR6000_SPIN_LOCK(&ar->arLock, 0); - - if (ar->dbgLogFetchInProgress) { - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - return A_EBUSY; - } - - /* block out others */ - ar->dbgLogFetchInProgress = true; - - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - - debug_hdr_ptr = dbglog_get_debug_hdr_ptr(ar); - printk("debug_hdr_ptr: 0x%x\n", debug_hdr_ptr); - - /* Get the contents of the ring buffer */ - if (debug_hdr_ptr) { - address = TARG_VTOP(ar->arTargetType, debug_hdr_ptr); - length = 4 /* sizeof(dbuf) */ + 4 /* sizeof(dropped) */; - A_MEMZERO(data, sizeof(data)); - ar6000_ReadDataDiag(ar->arHifDevice, address, (u8 *)data, length); - address = TARG_VTOP(ar->arTargetType, data[0] /* dbuf */); - firstbuf = address; - dropped = data[1]; /* dropped */ - length = 4 /* sizeof(next) */ + 4 /* sizeof(buffer) */ + 4 /* sizeof(bufsize) */ + 4 /* sizeof(length) */ + 4 /* sizeof(count) */ + 4 /* sizeof(free) */; - A_MEMZERO(data, sizeof(data)); - ar6000_ReadDataDiag(ar->arHifDevice, address, (u8 *)&data, length); - - do { - address = TARG_VTOP(ar->arTargetType, data[1] /* buffer*/); - length = data[3]; /* length */ - if ((length) && (length <= data[2] /* bufsize*/)) { - /* Rewind the index if it is about to overrun the buffer */ - if (ar->log_cnt > (DBGLOG_HOST_LOG_BUFFER_SIZE - length)) { - ar->log_cnt = 0; - } - if(0 != ar6000_ReadDataDiag(ar->arHifDevice, address, - (u8 *)&ar->log_buffer[ar->log_cnt], length)) - { - break; - } - ar6000_dbglog_event(ar, dropped, (s8 *)&ar->log_buffer[ar->log_cnt], length); - ar->log_cnt += length; - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_DBG_LOG,("Length: %d (Total size: %d)\n", - data[3], data[2])); - } - - address = TARG_VTOP(ar->arTargetType, data[0] /* next */); - length = 4 /* sizeof(next) */ + 4 /* sizeof(buffer) */ + 4 /* sizeof(bufsize) */ + 4 /* sizeof(length) */ + 4 /* sizeof(count) */ + 4 /* sizeof(free) */; - A_MEMZERO(data, sizeof(data)); - if(0 != ar6000_ReadDataDiag(ar->arHifDevice, address, - (u8 *)&data, length)) - { - break; - } - - } while (address != firstbuf); - } - - ar->dbgLogFetchInProgress = false; - - return 0; -} - -void -ar6000_dbglog_event(struct ar6_softc *ar, u32 dropped, - s8 *buffer, u32 length) -{ -#ifdef REPORT_DEBUG_LOGS_TO_APP - #define MAX_WIRELESS_EVENT_SIZE 252 - /* - * Break it up into chunks of MAX_WIRELESS_EVENT_SIZE bytes of messages. - * There seems to be a limitation on the length of message that could be - * transmitted to the user app via this mechanism. - */ - u32 send, sent; - - sent = 0; - send = dbglog_get_debug_fragment(&buffer[sent], length - sent, - MAX_WIRELESS_EVENT_SIZE); - while (send) { - sent += send; - send = dbglog_get_debug_fragment(&buffer[sent], length - sent, - MAX_WIRELESS_EVENT_SIZE); - } -#else - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Dropped logs: 0x%x\nDebug info length: %d\n", - dropped, length)); - - /* Interpret the debug logs */ - dbglog_parse_debug_logs((s8 *)buffer, length); -#endif /* REPORT_DEBUG_LOGS_TO_APP */ -} - - -static int __init -ar6000_init_module(void) -{ - static int probed = 0; - int r; - OSDRV_CALLBACKS osdrvCallbacks; - - a_module_debug_support_init(); - -#ifdef DEBUG - /* check for debug mask overrides */ - if (debughtc != 0) { - ATH_DEBUG_SET_DEBUG_MASK(htc,debughtc); - } - if (debugbmi != 0) { - ATH_DEBUG_SET_DEBUG_MASK(bmi,debugbmi); - } - if (debughif != 0) { - ATH_DEBUG_SET_DEBUG_MASK(hif,debughif); - } - if (debugdriver != 0) { - ATH_DEBUG_SET_DEBUG_MASK(driver,debugdriver); - } - -#endif - - A_REGISTER_MODULE_DEBUG_INFO(driver); - - A_MEMZERO(&osdrvCallbacks,sizeof(osdrvCallbacks)); - osdrvCallbacks.deviceInsertedHandler = ar6000_avail_ev; - osdrvCallbacks.deviceRemovedHandler = ar6000_unavail_ev; -#ifdef CONFIG_PM - osdrvCallbacks.deviceSuspendHandler = ar6000_suspend_ev; - osdrvCallbacks.deviceResumeHandler = ar6000_resume_ev; - osdrvCallbacks.devicePowerChangeHandler = ar6000_power_change_ev; -#endif - -#ifdef DEBUG - /* Set the debug flags if specified at load time */ - if(debugflags != 0) - { - g_dbg_flags = debugflags; - } -#endif - - if (probed) { - return -ENODEV; - } - probed++; - -#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL - memset(&aptcTR, 0, sizeof(APTC_TRAFFIC_RECORD)); -#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ - - r = HIFInit(&osdrvCallbacks); - if (r) - return r; - - return 0; -} - -static void __exit -ar6000_cleanup_module(void) -{ - int i = 0; - struct net_device *ar6000_netdev; - -#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL - /* Delete the Adaptive Power Control timer */ - if (timer_pending(&aptcTimer)) { - del_timer_sync(&aptcTimer); - } -#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ - - for (i=0; i < MAX_AR6000; i++) { - if (ar6000_devices[i] != NULL) { - ar6000_netdev = ar6000_devices[i]; - ar6000_devices[i] = NULL; - ar6000_destroy(ar6000_netdev, 1); - } - } - - HIFShutDownDevice(NULL); - - a_module_debug_support_cleanup(); - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("ar6000_cleanup: success\n")); -} - -#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL -void -aptcTimerHandler(unsigned long arg) -{ - u32 numbytes; - u32 throughput; - struct ar6_softc *ar; - int status; - - ar = (struct ar6_softc *)arg; - A_ASSERT(ar != NULL); - A_ASSERT(!timer_pending(&aptcTimer)); - - AR6000_SPIN_LOCK(&ar->arLock, 0); - - /* Get the number of bytes transferred */ - numbytes = aptcTR.bytesTransmitted + aptcTR.bytesReceived; - aptcTR.bytesTransmitted = aptcTR.bytesReceived = 0; - - /* Calculate and decide based on throughput thresholds */ - throughput = ((numbytes * 8)/APTC_TRAFFIC_SAMPLING_INTERVAL); /* Kbps */ - if (throughput < APTC_LOWER_THROUGHPUT_THRESHOLD) { - /* Enable Sleep and delete the timer */ - A_ASSERT(ar->arWmiReady == true); - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - status = wmi_powermode_cmd(ar->arWmi, REC_POWER); - AR6000_SPIN_LOCK(&ar->arLock, 0); - A_ASSERT(status == 0); - aptcTR.timerScheduled = false; - } else { - A_TIMEOUT_MS(&aptcTimer, APTC_TRAFFIC_SAMPLING_INTERVAL, 0); - } - - AR6000_SPIN_UNLOCK(&ar->arLock, 0); -} -#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ - -static void -ar6000_alloc_netbufs(A_NETBUF_QUEUE_T *q, u16 num) -{ - void * osbuf; - - while(num) { - if((osbuf = A_NETBUF_ALLOC(AR6000_BUFFER_SIZE))) { - A_NETBUF_ENQUEUE(q, osbuf); - } else { - break; - } - num--; - } - - if(num) { - A_PRINTF("%s(), allocation of netbuf failed", __func__); - } -} - -static struct bin_attribute bmi_attr = { - .attr = {.name = "bmi", .mode = 0600}, - .read = ar6000_sysfs_bmi_read, - .write = ar6000_sysfs_bmi_write, -}; - -static ssize_t -ar6000_sysfs_bmi_read(struct file *fp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t pos, size_t count) -{ - int index; - struct ar6_softc *ar; - struct hif_device_os_device_info *osDevInfo; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("BMI: Read %d bytes\n", (u32)count)); - for (index=0; index < MAX_AR6000; index++) { - ar = (struct ar6_softc *)ar6k_priv(ar6000_devices[index]); - osDevInfo = &ar->osDevInfo; - if (kobj == (&(((struct device *)osDevInfo->pOSDevice)->kobj))) { - break; - } - } - - if (index == MAX_AR6000) return 0; - - if ((BMIRawRead(ar->arHifDevice, (u8*)buf, count, true)) != 0) { - return 0; - } - - return count; -} - -static ssize_t -ar6000_sysfs_bmi_write(struct file *fp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t pos, size_t count) -{ - int index; - struct ar6_softc *ar; - struct hif_device_os_device_info *osDevInfo; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("BMI: Write %d bytes\n", (u32)count)); - for (index=0; index < MAX_AR6000; index++) { - ar = (struct ar6_softc *)ar6k_priv(ar6000_devices[index]); - osDevInfo = &ar->osDevInfo; - if (kobj == (&(((struct device *)osDevInfo->pOSDevice)->kobj))) { - break; - } - } - - if (index == MAX_AR6000) return 0; - - if ((BMIRawWrite(ar->arHifDevice, (u8*)buf, count)) != 0) { - return 0; - } - - return count; -} - -static int -ar6000_sysfs_bmi_init(struct ar6_softc *ar) -{ - int status; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("BMI: Creating sysfs entry\n")); - A_MEMZERO(&ar->osDevInfo, sizeof(struct hif_device_os_device_info)); - - /* Get the underlying OS device */ - status = HIFConfigureDevice(ar->arHifDevice, - HIF_DEVICE_GET_OS_DEVICE, - &ar->osDevInfo, - sizeof(struct hif_device_os_device_info)); - - if (status) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI: Failed to get OS device info from HIF\n")); - return A_ERROR; - } - - /* Create a bmi entry in the sysfs filesystem */ - if ((sysfs_create_bin_file(&(((struct device *)ar->osDevInfo.pOSDevice)->kobj), &bmi_attr)) < 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMI: Failed to create entry for bmi in sysfs filesystem\n")); - return A_ERROR; - } - - return 0; -} - -static void -ar6000_sysfs_bmi_deinit(struct ar6_softc *ar) -{ - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("BMI: Deleting sysfs entry\n")); - - sysfs_remove_bin_file(&(((struct device *)ar->osDevInfo.pOSDevice)->kobj), &bmi_attr); -} - -#define bmifn(fn) do { \ - if ((fn) < 0) { \ - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI operation failed: %d\n", __LINE__)); \ - return A_ERROR; \ - } \ -} while(0) - -#ifdef SOFTMAC_FILE_USED -#define AR6002_MAC_ADDRESS_OFFSET 0x0A -#define AR6003_MAC_ADDRESS_OFFSET 0x16 -static -void calculate_crc(u32 TargetType, u8 *eeprom_data) -{ - u16 *ptr_crc; - u16 *ptr16_eeprom; - u16 checksum; - u32 i; - u32 eeprom_size; - - if (TargetType == TARGET_TYPE_AR6001) - { - eeprom_size = 512; - ptr_crc = (u16 *)eeprom_data; - } - else if (TargetType == TARGET_TYPE_AR6003) - { - eeprom_size = 1024; - ptr_crc = (u16 *)((u8 *)eeprom_data + 0x04); - } - else - { - eeprom_size = 768; - ptr_crc = (u16 *)((u8 *)eeprom_data + 0x04); - } - - - // Clear the crc - *ptr_crc = 0; - - // Recalculate new CRC - checksum = 0; - ptr16_eeprom = (u16 *)eeprom_data; - for (i = 0;i < eeprom_size; i += 2) - { - checksum = checksum ^ (*ptr16_eeprom); - ptr16_eeprom++; - } - checksum = 0xFFFF ^ checksum; - *ptr_crc = checksum; -} - -static void -ar6000_softmac_update(struct ar6_softc *ar, u8 *eeprom_data, size_t size) -{ - const char *source = "random generated"; - const struct firmware *softmac_entry; - u8 *ptr_mac; - switch (ar->arTargetType) { - case TARGET_TYPE_AR6002: - ptr_mac = (u8 *)((u8 *)eeprom_data + AR6002_MAC_ADDRESS_OFFSET); - break; - case TARGET_TYPE_AR6003: - ptr_mac = (u8 *)((u8 *)eeprom_data + AR6003_MAC_ADDRESS_OFFSET); - break; - default: - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Invalid Target Type\n")); - return; - } - printk(KERN_DEBUG "MAC from EEPROM %pM\n", ptr_mac); - - /* create a random MAC in case we cannot read file from system */ - ptr_mac[0] = 0; - ptr_mac[1] = 0x03; - ptr_mac[2] = 0x7F; - ptr_mac[3] = random32() & 0xff; - ptr_mac[4] = random32() & 0xff; - ptr_mac[5] = random32() & 0xff; - if ((A_REQUEST_FIRMWARE(&softmac_entry, "softmac", ((struct device *)ar->osDevInfo.pOSDevice))) == 0) - { - char *macbuf = A_MALLOC_NOWAIT(softmac_entry->size+1); - if (macbuf) { - unsigned int softmac[6]; - memcpy(macbuf, softmac_entry->data, softmac_entry->size); - macbuf[softmac_entry->size] = '\0'; - if (sscanf(macbuf, "%02x:%02x:%02x:%02x:%02x:%02x", - &softmac[0], &softmac[1], &softmac[2], - &softmac[3], &softmac[4], &softmac[5])==6) { - int i; - for (i=0; i<6; ++i) { - ptr_mac[i] = softmac[i] & 0xff; - } - source = "softmac file"; - } - kfree(macbuf); - } - A_RELEASE_FIRMWARE(softmac_entry); - } - printk(KERN_DEBUG "MAC from %s %pM\n", source, ptr_mac); - calculate_crc(ar->arTargetType, eeprom_data); -} -#endif /* SOFTMAC_FILE_USED */ - -static int -ar6000_transfer_bin_file(struct ar6_softc *ar, AR6K_BIN_FILE file, u32 address, bool compressed) -{ - int status; - const char *filename; - const struct firmware *fw_entry; - u32 fw_entry_size; - u8 **buf; - size_t *buf_len; - - switch (file) { - case AR6K_OTP_FILE: - buf = &ar->fw_otp; - buf_len = &ar->fw_otp_len; - if (ar->arVersion.target_ver == AR6003_REV1_VERSION) { - filename = AR6003_REV1_OTP_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) { - filename = AR6003_REV2_OTP_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV3_VERSION) { - filename = AR6003_REV3_OTP_FILE; - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown firmware revision: %d\n", ar->arVersion.target_ver)); - return A_ERROR; - } - break; - - case AR6K_FIRMWARE_FILE: - buf = &ar->fw; - buf_len = &ar->fw_len; - if (ar->arVersion.target_ver == AR6003_REV1_VERSION) { - filename = AR6003_REV1_FIRMWARE_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) { - filename = AR6003_REV2_FIRMWARE_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV3_VERSION) { - filename = AR6003_REV3_FIRMWARE_FILE; - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown firmware revision: %d\n", ar->arVersion.target_ver)); - return A_ERROR; - } - - if (eppingtest) { - bypasswmi = true; - if (ar->arVersion.target_ver == AR6003_REV1_VERSION) { - filename = AR6003_REV1_EPPING_FIRMWARE_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) { - filename = AR6003_REV2_EPPING_FIRMWARE_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV3_VERSION) { - filename = AR6003_REV3_EPPING_FIRMWARE_FILE; - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("eppingtest : unsupported firmware revision: %d\n", - ar->arVersion.target_ver)); - return A_ERROR; - } - compressed = false; - } - -#ifdef CONFIG_HOST_TCMD_SUPPORT - if(testmode) { - if (ar->arVersion.target_ver == AR6003_REV1_VERSION) { - filename = AR6003_REV1_TCMD_FIRMWARE_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) { - filename = AR6003_REV2_TCMD_FIRMWARE_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV3_VERSION) { - filename = AR6003_REV3_TCMD_FIRMWARE_FILE; - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown firmware revision: %d\n", ar->arVersion.target_ver)); - return A_ERROR; - } - compressed = false; - } -#endif -#ifdef HTC_RAW_INTERFACE - if (!eppingtest && bypasswmi) { - if (ar->arVersion.target_ver == AR6003_REV1_VERSION) { - filename = AR6003_REV1_ART_FIRMWARE_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) { - filename = AR6003_REV2_ART_FIRMWARE_FILE; - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown firmware revision: %d\n", ar->arVersion.target_ver)); - return A_ERROR; - } - compressed = false; - } -#endif - break; - - case AR6K_PATCH_FILE: - buf = &ar->fw_patch; - buf_len = &ar->fw_patch_len; - if (ar->arVersion.target_ver == AR6003_REV1_VERSION) { - filename = AR6003_REV1_PATCH_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) { - filename = AR6003_REV2_PATCH_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV3_VERSION) { - filename = AR6003_REV3_PATCH_FILE; - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown firmware revision: %d\n", ar->arVersion.target_ver)); - return A_ERROR; - } - break; - - case AR6K_BOARD_DATA_FILE: - buf = &ar->fw_data; - buf_len = &ar->fw_data_len; - if (ar->arVersion.target_ver == AR6003_REV1_VERSION) { - filename = AR6003_REV1_BOARD_DATA_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) { - filename = AR6003_REV2_BOARD_DATA_FILE; - } else if (ar->arVersion.target_ver == AR6003_REV3_VERSION) { - filename = AR6003_REV3_BOARD_DATA_FILE; - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown firmware revision: %d\n", ar->arVersion.target_ver)); - return A_ERROR; - } - break; - - default: - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown file type: %d\n", file)); - return A_ERROR; - } - - if (*buf == NULL) { - if ((A_REQUEST_FIRMWARE(&fw_entry, filename, ((struct device *)ar->osDevInfo.pOSDevice))) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to get %s\n", filename)); - return A_ENOENT; - } - - *buf = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL); - *buf_len = fw_entry->size; - A_RELEASE_FIRMWARE(fw_entry); - } - -#ifdef SOFTMAC_FILE_USED - if (file==AR6K_BOARD_DATA_FILE && *buf_len) { - ar6000_softmac_update(ar, *buf, *buf_len); - } -#endif - - - fw_entry_size = *buf_len; - - /* Load extended board data for AR6003 */ - if ((file==AR6K_BOARD_DATA_FILE) && *buf) { - u32 board_ext_address; - u32 board_ext_data_size; - u32 board_data_size; - - board_ext_data_size = (((ar)->arTargetType == TARGET_TYPE_AR6002) ? AR6002_BOARD_EXT_DATA_SZ : \ - (((ar)->arTargetType == TARGET_TYPE_AR6003) ? AR6003_BOARD_EXT_DATA_SZ : 0)); - - board_data_size = (((ar)->arTargetType == TARGET_TYPE_AR6002) ? AR6002_BOARD_DATA_SZ : \ - (((ar)->arTargetType == TARGET_TYPE_AR6003) ? AR6003_BOARD_DATA_SZ : 0)); - - /* Determine where in Target RAM to write Board Data */ - bmifn(BMIReadMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_ext_data), (u8 *)&board_ext_address, 4)); - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("Board extended Data download address: 0x%x\n", board_ext_address)); - - /* check whether the target has allocated memory for extended board data and file contains extended board data */ - if ((board_ext_address) && (*buf_len == (board_data_size + board_ext_data_size))) { - u32 param; - - status = BMIWriteMemory(ar->arHifDevice, board_ext_address, (u8 *)(*buf + board_data_size), board_ext_data_size); - - if (status) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI operation failed: %d\n", __LINE__)); - return A_ERROR; - } - - /* Record the fact that extended board Data IS initialized */ - param = (board_ext_data_size << 16) | 1; - bmifn(BMIWriteMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_ext_data_config), - (unsigned char *)¶m, 4)); - } - fw_entry_size = board_data_size; - } - - if (compressed) { - status = BMIFastDownload(ar->arHifDevice, address, *buf, fw_entry_size); - } else { - status = BMIWriteMemory(ar->arHifDevice, address, *buf, fw_entry_size); - } - - if (status) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI operation failed: %d\n", __LINE__)); - return A_ERROR; - } - - return 0; -} - -int -ar6000_update_bdaddr(struct ar6_softc *ar) -{ - - if (setupbtdev != 0) { - u32 address; - - if (BMIReadMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_data), (u8 *)&address, 4) != 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIReadMemory for hi_board_data failed\n")); - return A_ERROR; - } - - if (BMIReadMemory(ar->arHifDevice, address + BDATA_BDADDR_OFFSET, (u8 *)ar->bdaddr, 6) != 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIReadMemory for BD address failed\n")); - return A_ERROR; - } - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BDADDR 0x%x:0x%x:0x%x:0x%x:0x%x:0x%x\n", ar->bdaddr[0], - ar->bdaddr[1], ar->bdaddr[2], ar->bdaddr[3], - ar->bdaddr[4], ar->bdaddr[5])); - } - -return 0; -} - -int -ar6000_sysfs_bmi_get_config(struct ar6_softc *ar, u32 mode) -{ - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("BMI: Requesting device specific configuration\n")); - - if (mode == WLAN_INIT_MODE_UDEV) { - char version[16]; - const struct firmware *fw_entry; - - /* Get config using udev through a script in user space */ - sprintf(version, "%2.2x", ar->arVersion.target_ver); - if ((A_REQUEST_FIRMWARE(&fw_entry, version, ((struct device *)ar->osDevInfo.pOSDevice))) != 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI: Failure to get configuration for target version: %s\n", version)); - return A_ERROR; - } - - A_RELEASE_FIRMWARE(fw_entry); - } else { - /* The config is contained within the driver itself */ - int status; - u32 param, options, sleep, address; - - /* Temporarily disable system sleep */ - address = MBOX_BASE_ADDRESS + LOCAL_SCRATCH_ADDRESS; - bmifn(BMIReadSOCRegister(ar->arHifDevice, address, ¶m)); - options = param; - param |= AR6K_OPTION_SLEEP_DISABLE; - bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param)); - - address = RTC_BASE_ADDRESS + SYSTEM_SLEEP_ADDRESS; - bmifn(BMIReadSOCRegister(ar->arHifDevice, address, ¶m)); - sleep = param; - param |= WLAN_SYSTEM_SLEEP_DISABLE_SET(1); - bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param)); - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("old options: %d, old sleep: %d\n", options, sleep)); - - if (ar->arTargetType == TARGET_TYPE_AR6003) { - /* Program analog PLL register */ - bmifn(BMIWriteSOCRegister(ar->arHifDevice, ANALOG_INTF_BASE_ADDRESS + 0x284, 0xF9104001)); - /* Run at 80/88MHz by default */ - param = CPU_CLOCK_STANDARD_SET(1); - } else { - /* Run at 40/44MHz by default */ - param = CPU_CLOCK_STANDARD_SET(0); - } - address = RTC_BASE_ADDRESS + CPU_CLOCK_ADDRESS; - bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param)); - - param = 0; - if (ar->arTargetType == TARGET_TYPE_AR6002) { - bmifn(BMIReadMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_ext_clk_detected), (u8 *)¶m, 4)); - } - - /* LPO_CAL.ENABLE = 1 if no external clk is detected */ - if (param != 1) { - address = RTC_BASE_ADDRESS + LPO_CAL_ADDRESS; - param = LPO_CAL_ENABLE_SET(1); - bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param)); - } - - /* Venus2.0: Lower SDIO pad drive strength, - * temporary WAR to avoid SDIO CRC error */ - if (ar->arVersion.target_ver == AR6003_REV2_VERSION) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("AR6K: Temporary WAR to avoid SDIO CRC error\n")); - param = 0x20; - address = GPIO_BASE_ADDRESS + GPIO_PIN10_ADDRESS; - bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param)); - - address = GPIO_BASE_ADDRESS + GPIO_PIN11_ADDRESS; - bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param)); - - address = GPIO_BASE_ADDRESS + GPIO_PIN12_ADDRESS; - bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param)); - - address = GPIO_BASE_ADDRESS + GPIO_PIN13_ADDRESS; - bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param)); - } - -#ifdef FORCE_INTERNAL_CLOCK - /* Ignore external clock, if any, and force use of internal clock */ - if (ar->arTargetType == TARGET_TYPE_AR6003) { - /* hi_ext_clk_detected = 0 */ - param = 0; - bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_ext_clk_detected), (u8 *)¶m, 4)); - - /* CLOCK_CONTROL &= ~LF_CLK32 */ - address = RTC_BASE_ADDRESS + CLOCK_CONTROL_ADDRESS; - bmifn(BMIReadSOCRegister(ar->arHifDevice, address, ¶m)); - param &= (~CLOCK_CONTROL_LF_CLK32_SET(1)); - bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param)); - } -#endif /* FORCE_INTERNAL_CLOCK */ - - /* Transfer Board Data from Target EEPROM to Target RAM */ - if (ar->arTargetType == TARGET_TYPE_AR6003) { - /* Determine where in Target RAM to write Board Data */ - bmifn(BMIReadMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_data), (u8 *)&address, 4)); - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("Board Data download address: 0x%x\n", address)); - - /* Write EEPROM data to Target RAM */ - if ((ar6000_transfer_bin_file(ar, AR6K_BOARD_DATA_FILE, address, false)) != 0) { - return A_ERROR; - } - - /* Record the fact that Board Data IS initialized */ - param = 1; - bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_data_initialized), (u8 *)¶m, 4)); - - /* Transfer One time Programmable data */ - AR6K_APP_LOAD_ADDRESS(address, ar->arVersion.target_ver); - if (ar->arVersion.target_ver == AR6003_REV3_VERSION) - address = 0x1234; - status = ar6000_transfer_bin_file(ar, AR6K_OTP_FILE, address, true); - if (status == 0) { - /* Execute the OTP code */ - param = 0; - AR6K_APP_START_OVERRIDE_ADDRESS(address, ar->arVersion.target_ver); - bmifn(BMIExecute(ar->arHifDevice, address, ¶m)); - } else if (status != A_ENOENT) { - return A_ERROR; - } - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Programming of board data for chip %d not supported\n", ar->arTargetType)); - return A_ERROR; - } - - /* Download Target firmware */ - AR6K_APP_LOAD_ADDRESS(address, ar->arVersion.target_ver); - if (ar->arVersion.target_ver == AR6003_REV3_VERSION) - address = 0x1234; - if ((ar6000_transfer_bin_file(ar, AR6K_FIRMWARE_FILE, address, true)) != 0) { - return A_ERROR; - } - - /* Set starting address for firmware */ - AR6K_APP_START_OVERRIDE_ADDRESS(address, ar->arVersion.target_ver); - bmifn(BMISetAppStart(ar->arHifDevice, address)); - - if(ar->arTargetType == TARGET_TYPE_AR6003) { - AR6K_DATASET_PATCH_ADDRESS(address, ar->arVersion.target_ver); - if ((ar6000_transfer_bin_file(ar, AR6K_PATCH_FILE, - address, false)) != 0) - return A_ERROR; - param = address; - bmifn(BMIWriteMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, hi_dset_list_head), - (unsigned char *)¶m, 4)); - } - - /* Restore system sleep */ - address = RTC_BASE_ADDRESS + SYSTEM_SLEEP_ADDRESS; - bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, sleep)); - - address = MBOX_BASE_ADDRESS + LOCAL_SCRATCH_ADDRESS; - param = options | 0x20; - bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param)); - - if (ar->arTargetType == TARGET_TYPE_AR6003) { - /* Configure GPIO AR6003 UART */ -#ifndef CONFIG_AR600x_DEBUG_UART_TX_PIN -#define CONFIG_AR600x_DEBUG_UART_TX_PIN 8 -#endif - param = CONFIG_AR600x_DEBUG_UART_TX_PIN; - bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_dbg_uart_txpin), (u8 *)¶m, 4)); - -#if (CONFIG_AR600x_DEBUG_UART_TX_PIN == 23) - { - address = GPIO_BASE_ADDRESS + CLOCK_GPIO_ADDRESS; - bmifn(BMIReadSOCRegister(ar->arHifDevice, address, ¶m)); - param |= CLOCK_GPIO_BT_CLK_OUT_EN_SET(1); - bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param)); - } -#endif - - /* Configure GPIO for BT Reset */ -#ifdef ATH6KL_CONFIG_GPIO_BT_RESET -#define CONFIG_AR600x_BT_RESET_PIN 0x16 - param = CONFIG_AR600x_BT_RESET_PIN; - bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_hci_uart_support_pins), (u8 *)¶m, 4)); -#endif /* ATH6KL_CONFIG_GPIO_BT_RESET */ - - /* Configure UART flow control polarity */ -#ifndef CONFIG_ATH6KL_BT_UART_FC_POLARITY -#define CONFIG_ATH6KL_BT_UART_FC_POLARITY 0 -#endif - -#if (CONFIG_ATH6KL_BT_UART_FC_POLARITY == 1) - if (ar->arVersion.target_ver == AR6003_REV2_VERSION) { - param = ((CONFIG_ATH6KL_BT_UART_FC_POLARITY << 1) & 0x2); - bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_hci_uart_pwr_mgmt_params), (u8 *)¶m, 4)); - } -#endif /* CONFIG_ATH6KL_BT_UART_FC_POLARITY */ - } - -#ifdef HTC_RAW_INTERFACE - if (!eppingtest && bypasswmi) { - /* Don't run BMIDone for ART mode and force resetok=0 */ - resetok = 0; - msleep(1000); - } -#endif /* HTC_RAW_INTERFACE */ - } - - return 0; -} - -int -ar6000_configure_target(struct ar6_softc *ar) -{ - u32 param; - if (enableuartprint) { - param = 1; - if (BMIWriteMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, hi_serial_enable), - (u8 *)¶m, - 4)!= 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for enableuartprint failed \n")); - return A_ERROR; - } - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Serial console prints enabled\n")); - } - - /* Tell target which HTC version it is used*/ - param = HTC_PROTOCOL_VERSION; - if (BMIWriteMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, hi_app_host_interest), - (u8 *)¶m, - 4)!= 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for htc version failed \n")); - return A_ERROR; - } - -#ifdef CONFIG_HOST_TCMD_SUPPORT - if(testmode) { - ar->arTargetMode = AR6000_TCMD_MODE; - }else { - ar->arTargetMode = AR6000_WLAN_MODE; - } -#endif - if (enabletimerwar) { - u32 param; - - if (BMIReadMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag), - (u8 *)¶m, - 4)!= 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIReadMemory for enabletimerwar failed \n")); - return A_ERROR; - } - - param |= HI_OPTION_TIMER_WAR; - - if (BMIWriteMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag), - (u8 *)¶m, - 4) != 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for enabletimerwar failed \n")); - return A_ERROR; - } - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Timer WAR enabled\n")); - } - - /* set the firmware mode to STA/IBSS/AP */ - { - u32 param; - - if (BMIReadMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag), - (u8 *)¶m, - 4)!= 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIReadMemory for setting fwmode failed \n")); - return A_ERROR; - } - - param |= (num_device << HI_OPTION_NUM_DEV_SHIFT); - param |= (fwmode << HI_OPTION_FW_MODE_SHIFT); - param |= (mac_addr_method << HI_OPTION_MAC_ADDR_METHOD_SHIFT); - param |= (firmware_bridge << HI_OPTION_FW_BRIDGE_SHIFT); - - - if (BMIWriteMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag), - (u8 *)¶m, - 4) != 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for setting fwmode failed \n")); - return A_ERROR; - } - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Firmware mode set\n")); - } - -#ifdef ATH6KL_DISABLE_TARGET_DBGLOGS - { - u32 param; - - if (BMIReadMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag), - (u8 *)¶m, - 4)!= 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIReadMemory for disabling debug logs failed\n")); - return A_ERROR; - } - - param |= HI_OPTION_DISABLE_DBGLOG; - - if (BMIWriteMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag), - (u8 *)¶m, - 4) != 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for HI_OPTION_DISABLE_DBGLOG\n")); - return A_ERROR; - } - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Firmware mode set\n")); - } -#endif /* ATH6KL_DISABLE_TARGET_DBGLOGS */ - - /* - * Hardcode the address use for the extended board data - * Ideally this should be pre-allocate by the OS at boot time - * But since it is a new feature and board data is loaded - * at init time, we have to workaround this from host. - * It is difficult to patch the firmware boot code, - * but possible in theory. - */ - - if (ar->arTargetType == TARGET_TYPE_AR6003) { - u32 ramReservedSz; - if (ar->arVersion.target_ver == AR6003_REV2_VERSION) { - param = AR6003_REV2_BOARD_EXT_DATA_ADDRESS; - ramReservedSz = AR6003_REV2_RAM_RESERVE_SIZE; - } else { - param = AR6003_REV3_BOARD_EXT_DATA_ADDRESS; - ramReservedSz = AR6003_REV3_RAM_RESERVE_SIZE; - } - if (BMIWriteMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_ext_data), - (u8 *)¶m, 4) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, - ("BMIWriteMemory for " - "hi_board_ext_data failed\n")); - return A_ERROR; - } - if (BMIWriteMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, - hi_end_RAM_reserve_sz), - (u8 *)&ramReservedSz, 4) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR , - ("BMIWriteMemory for " - "hi_end_RAM_reserve_sz failed\n")); - return A_ERROR; - } - } - - /* since BMIInit is called in the driver layer, we have to set the block - * size here for the target */ - - if (ar6000_set_htc_params(ar->arHifDevice, ar->arTargetType, - mbox_yield_limit, 0)) { - /* use default number of control buffers */ - return A_ERROR; - } - - if (setupbtdev != 0) { - if (ar6000_set_hci_bridge_flags(ar->arHifDevice, - ar->arTargetType, - setupbtdev)) { - return A_ERROR; - } - } - return 0; -} - -static void -init_netdev(struct net_device *dev, char *name) -{ - dev->netdev_ops = &ar6000_netdev_ops; - dev->watchdog_timeo = AR6000_TX_TIMEOUT; - - /* - * We need the OS to provide us with more headroom in order to - * perform dix to 802.3, WMI header encap, and the HTC header - */ - if (processDot11Hdr) { - dev->hard_header_len = sizeof(struct ieee80211_qosframe) + sizeof(ATH_LLC_SNAP_HDR) + sizeof(WMI_DATA_HDR) + HTC_HEADER_LEN + WMI_MAX_TX_META_SZ + LINUX_HACK_FUDGE_FACTOR; - } else { - dev->hard_header_len = ETH_HLEN + sizeof(ATH_LLC_SNAP_HDR) + - sizeof(WMI_DATA_HDR) + HTC_HEADER_LEN + WMI_MAX_TX_META_SZ + LINUX_HACK_FUDGE_FACTOR; - } - - if (name[0]) - { - strcpy(dev->name, name); - } - -#ifdef CONFIG_CHECKSUM_OFFLOAD - if(csumOffload){ - dev->features |= NETIF_F_IP_CSUM; /*advertise kernel capability to do TCP/UDP CSUM offload for IPV4*/ - } -#endif - - return; -} - -static int __ath6kl_init_netdev(struct net_device *dev) -{ - int r; - - rtnl_lock(); - r = ar6000_init(dev); - rtnl_unlock(); - - if (r) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_avail: ar6000_init\n")); - return r; - } - - return 0; -} - -#ifdef HTC_RAW_INTERFACE -static int ath6kl_init_netdev_wmi(struct net_device *dev) -{ - if (!eppingtest && bypasswmi) - return 0; - - return __ath6kl_init_netdev(dev); -} -#else -static int ath6kl_init_netdev_wmi(struct net_device *dev) -{ - return __ath6kl_init_netdev(dev); -} -#endif - -static int ath6kl_init_netdev(struct ar6_softc *ar) -{ - int r; - - r = ar6000_sysfs_bmi_get_config(ar, wlaninitmode); - if (r) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, - ("ar6000_avail: " - "ar6000_sysfs_bmi_get_config failed\n")); - return r; - } - - return ath6kl_init_netdev_wmi(ar->arNetDev); -} - -/* - * HTC Event handlers - */ -static int -ar6000_avail_ev(void *context, void *hif_handle) -{ - int i; - struct net_device *dev; - void *ar_netif; - struct ar6_softc *ar; - int device_index = 0; - struct htc_init_info htcInfo; - struct wireless_dev *wdev; - int r = 0; - struct hif_device_os_device_info osDevInfo; - - memset(&osDevInfo, 0, sizeof(osDevInfo)); - if (HIFConfigureDevice(hif_handle, HIF_DEVICE_GET_OS_DEVICE, - &osDevInfo, sizeof(osDevInfo))) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s: Failed to get OS device instance\n", __func__)); - return A_ERROR; - } - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("ar6000_available\n")); - - for (i=0; i < MAX_AR6000; i++) { - if (ar6000_devices[i] == NULL) { - break; - } - } - - if (i == MAX_AR6000) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_available: max devices reached\n")); - return A_ERROR; - } - - /* Save this. It gives a bit better readability especially since */ - /* we use another local "i" variable below. */ - device_index = i; - - wdev = ar6k_cfg80211_init(osDevInfo.pOSDevice); - if (IS_ERR(wdev)) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: ar6k_cfg80211_init failed\n", __func__)); - return A_ERROR; - } - ar_netif = wdev_priv(wdev); - - if (ar_netif == NULL) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Can't allocate ar6k priv memory\n", __func__)); - return A_ERROR; - } - - A_MEMZERO(ar_netif, sizeof(struct ar6_softc)); - ar = (struct ar6_softc *)ar_netif; - - ar->wdev = wdev; - wdev->iftype = NL80211_IFTYPE_STATION; - - dev = alloc_netdev_mq(0, "wlan%d", ether_setup, 1); - if (!dev) { - printk(KERN_CRIT "AR6K: no memory for network device instance\n"); - ar6k_cfg80211_deinit(ar); - return A_ERROR; - } - - dev->ieee80211_ptr = wdev; - SET_NETDEV_DEV(dev, wiphy_dev(wdev->wiphy)); - wdev->netdev = dev; - ar->arNetworkType = INFRA_NETWORK; - ar->smeState = SME_DISCONNECTED; - ar->arAutoAuthStage = AUTH_IDLE; - - init_netdev(dev, ifname); - - - ar->arNetDev = dev; - ar->arHifDevice = hif_handle; - ar->arWlanState = WLAN_ENABLED; - ar->arDeviceIndex = device_index; - - ar->arWlanPowerState = WLAN_POWER_STATE_ON; - ar->arWlanOff = false; /* We are in ON state */ -#ifdef CONFIG_PM - ar->arWowState = WLAN_WOW_STATE_NONE; - ar->arBTOff = true; /* BT chip assumed to be OFF */ - ar->arBTSharing = WLAN_CONFIG_BT_SHARING; - ar->arWlanOffConfig = WLAN_CONFIG_WLAN_OFF; - ar->arSuspendConfig = WLAN_CONFIG_PM_SUSPEND; - ar->arWow2Config = WLAN_CONFIG_PM_WOW2; -#endif /* CONFIG_PM */ - - A_INIT_TIMER(&ar->arHBChallengeResp.timer, ar6000_detect_error, dev); - ar->arHBChallengeResp.seqNum = 0; - ar->arHBChallengeResp.outstanding = false; - ar->arHBChallengeResp.missCnt = 0; - ar->arHBChallengeResp.frequency = AR6000_HB_CHALLENGE_RESP_FREQ_DEFAULT; - ar->arHBChallengeResp.missThres = AR6000_HB_CHALLENGE_RESP_MISS_THRES_DEFAULT; - - ar6000_init_control_info(ar); - init_waitqueue_head(&arEvent); - sema_init(&ar->arSem, 1); - ar->bIsDestroyProgress = false; - - INIT_HTC_PACKET_QUEUE(&ar->amsdu_rx_buffer_queue); - -#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL - A_INIT_TIMER(&aptcTimer, aptcTimerHandler, ar); -#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ - - A_INIT_TIMER(&ar->disconnect_timer, disconnect_timer_handler, dev); - - BMIInit(); - - ar6000_sysfs_bmi_init(ar); - - { - struct bmi_target_info targ_info; - - r = BMIGetTargetInfo(ar->arHifDevice, &targ_info); - if (r) - goto avail_ev_failed; - - ar->arVersion.target_ver = targ_info.target_ver; - ar->arTargetType = targ_info.target_type; - wdev->wiphy->hw_version = targ_info.target_ver; - } - - r = ar6000_configure_target(ar); - if (r) - goto avail_ev_failed; - - A_MEMZERO(&htcInfo,sizeof(htcInfo)); - htcInfo.pContext = ar; - htcInfo.TargetFailure = ar6000_target_failure; - - ar->arHtcTarget = HTCCreate(ar->arHifDevice,&htcInfo); - - if (!ar->arHtcTarget) { - r = -ENOMEM; - goto avail_ev_failed; - } - - spin_lock_init(&ar->arLock); - -#ifdef WAPI_ENABLE - ar->arWapiEnable = 0; -#endif - - - if(csumOffload){ - /*if external frame work is also needed, change and use an extended rxMetaVerion*/ - ar->rxMetaVersion=WMI_META_VERSION_2; - } - - ar->aggr_cntxt = aggr_init(ar6000_alloc_netbufs); - if (!ar->aggr_cntxt) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s() Failed to initialize aggr.\n", __func__)); - r = -ENOMEM; - goto avail_ev_failed; - } - - aggr_register_rx_dispatcher(ar->aggr_cntxt, (void *)dev, ar6000_deliver_frames_to_nw_stack); - - HIFClaimDevice(ar->arHifDevice, ar); - - /* We only register the device in the global list if we succeed. */ - /* If the device is in the global list, it will be destroyed */ - /* when the module is unloaded. */ - ar6000_devices[device_index] = dev; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("BMI enabled: %d\n", wlaninitmode)); - if ((wlaninitmode == WLAN_INIT_MODE_UDEV) || - (wlaninitmode == WLAN_INIT_MODE_DRV)) { - r = ath6kl_init_netdev(ar); - if (r) - goto avail_ev_failed; - } - - /* This runs the init function if registered */ - r = register_netdev(dev); - if (r) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_avail: register_netdev failed\n")); - ar6000_destroy(dev, 0); - return r; - } - - is_netdev_registered = 1; - -#ifdef CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT - arApNetDev = NULL; -#endif /* CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT */ - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("ar6000_avail: name=%s hifdevice=0x%lx, dev=0x%lx (%d), ar=0x%lx\n", - dev->name, (unsigned long)ar->arHifDevice, (unsigned long)dev, device_index, - (unsigned long)ar)); - -avail_ev_failed : - if (r) - ar6000_sysfs_bmi_deinit(ar); - - return r; -} - -static void ar6000_target_failure(void *Instance, int Status) -{ - struct ar6_softc *ar = (struct ar6_softc *)Instance; - WMI_TARGET_ERROR_REPORT_EVENT errEvent; - static bool sip = false; - - if (Status != 0) { - - printk(KERN_ERR "ar6000_target_failure: target asserted \n"); - - if (timer_pending(&ar->arHBChallengeResp.timer)) { - A_UNTIMEOUT(&ar->arHBChallengeResp.timer); - } - - /* try dumping target assertion information (if any) */ - ar6000_dump_target_assert_info(ar->arHifDevice,ar->arTargetType); - - /* - * Fetch the logs from the target via the diagnostic - * window. - */ - ar6000_dbglog_get_debug_logs(ar); - - /* Report the error only once */ - if (!sip) { - sip = true; - errEvent.errorVal = WMI_TARGET_COM_ERR | - WMI_TARGET_FATAL_ERR; - } - } -} - -static int -ar6000_unavail_ev(void *context, void *hif_handle) -{ - struct ar6_softc *ar = (struct ar6_softc *)context; - /* NULL out it's entry in the global list */ - ar6000_devices[ar->arDeviceIndex] = NULL; - ar6000_destroy(ar->arNetDev, 1); - - return 0; -} - -void -ar6000_restart_endpoint(struct net_device *dev) -{ - int status = 0; - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(dev); - - BMIInit(); - do { - if ( (status=ar6000_configure_target(ar))!= 0) - break; - if ( (status=ar6000_sysfs_bmi_get_config(ar, wlaninitmode)) != 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_avail: ar6000_sysfs_bmi_get_config failed\n")); - break; - } - rtnl_lock(); - status = (ar6000_init(dev)==0) ? 0 : A_ERROR; - rtnl_unlock(); - - if (status) { - break; - } - if (ar->arSsidLen && ar->arWlanState == WLAN_ENABLED) { - ar6000_connect_to_ap(ar); - } - } while (0); - - if (status== 0) { - return; - } - - ar6000_devices[ar->arDeviceIndex] = NULL; - ar6000_destroy(ar->arNetDev, 1); -} - -void -ar6000_stop_endpoint(struct net_device *dev, bool keepprofile, bool getdbglogs) -{ - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(dev); - - /* Stop the transmit queues */ - netif_stop_queue(dev); - - /* Disable the target and the interrupts associated with it */ - if (ar->arWmiReady == true) - { - if (!bypasswmi) - { - bool disconnectIssued; - - disconnectIssued = (ar->arConnected) || (ar->arConnectPending); - ar6000_disconnect(ar); - if (!keepprofile) { - ar6000_init_profile_info(ar); - } - - A_UNTIMEOUT(&ar->disconnect_timer); - - if (getdbglogs) { - ar6000_dbglog_get_debug_logs(ar); - } - - ar->arWmiReady = false; - wmi_shutdown(ar->arWmi); - ar->arWmiEnabled = false; - ar->arWmi = NULL; - /* - * After wmi_shudown all WMI events will be dropped. - * We need to cleanup the buffers allocated in AP mode - * and give disconnect notification to stack, which usually - * happens in the disconnect_event. - * Simulate the disconnect_event by calling the function directly. - * Sometimes disconnect_event will be received when the debug logs - * are collected. - */ - if (disconnectIssued) { - if(ar->arNetworkType & AP_NETWORK) { - ar6000_disconnect_event(ar, DISCONNECT_CMD, bcast_mac, 0, NULL, 0); - } else { - ar6000_disconnect_event(ar, DISCONNECT_CMD, ar->arBssid, 0, NULL, 0); - } - } - ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT; - ar->user_key_ctrl = 0; - } - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("%s(): WMI stopped\n", __func__)); - } - else - { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("%s(): WMI not ready 0x%lx 0x%lx\n", - __func__, (unsigned long) ar, (unsigned long) ar->arWmi)); - - /* Shut down WMI if we have started it */ - if(ar->arWmiEnabled == true) - { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("%s(): Shut down WMI\n", __func__)); - wmi_shutdown(ar->arWmi); - ar->arWmiEnabled = false; - ar->arWmi = NULL; - } - } - - if (ar->arHtcTarget != NULL) { -#ifdef EXPORT_HCI_BRIDGE_INTERFACE - if (NULL != ar6kHciTransCallbacks.cleanupTransport) { - ar6kHciTransCallbacks.cleanupTransport(NULL); - } -#else - // FIXME: workaround to reset BT's UART baud rate to default - if (NULL != ar->exitCallback) { - struct ar3k_config_info ar3kconfig; - int status; - - A_MEMZERO(&ar3kconfig,sizeof(ar3kconfig)); - ar6000_set_default_ar3kconfig(ar, (void *)&ar3kconfig); - status = ar->exitCallback(&ar3kconfig); - if (0 != status) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Failed to reset AR3K baud rate! \n")); - } - } - // END workaround - if (setuphci) - ar6000_cleanup_hci(ar); -#endif - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,(" Shutting down HTC .... \n")); - /* stop HTC */ - HTCStop(ar->arHtcTarget); - } - - if (resetok) { - /* try to reset the device if we can - * The driver may have been configure NOT to reset the target during - * a debug session */ - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,(" Attempting to reset target on instance destroy.... \n")); - if (ar->arHifDevice != NULL) { - bool coldReset = (ar->arTargetType == TARGET_TYPE_AR6003) ? true: false; - ar6000_reset_device(ar->arHifDevice, ar->arTargetType, true, coldReset); - } - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,(" Host does not want target reset. \n")); - } - /* Done with cookies */ - ar6000_cookie_cleanup(ar); - - /* cleanup any allocated AMSDU buffers */ - ar6000_cleanup_amsdu_rxbufs(ar); -} -/* - * We need to differentiate between the surprise and planned removal of the - * device because of the following consideration: - * - In case of surprise removal, the hcd already frees up the pending - * for the device and hence there is no need to unregister the function - * driver inorder to get these requests. For planned removal, the function - * driver has to explicitly unregister itself to have the hcd return all the - * pending requests before the data structures for the devices are freed up. - * Note that as per the current implementation, the function driver will - * end up releasing all the devices since there is no API to selectively - * release a particular device. - * - Certain commands issued to the target can be skipped for surprise - * removal since they will anyway not go through. - */ -void -ar6000_destroy(struct net_device *dev, unsigned int unregister) -{ - struct ar6_softc *ar; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("+ar6000_destroy \n")); - - if((dev == NULL) || ((ar = ar6k_priv(dev)) == NULL)) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s(): Failed to get device structure.\n", __func__)); - return; - } - - ar->bIsDestroyProgress = true; - - if (down_interruptible(&ar->arSem)) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s(): down_interruptible failed \n", __func__)); - return; - } - - if (ar->arWlanPowerState != WLAN_POWER_STATE_CUT_PWR) { - /* only stop endpoint if we are not stop it in suspend_ev */ - ar6000_stop_endpoint(dev, false, true); - } - - ar->arWlanState = WLAN_DISABLED; - if (ar->arHtcTarget != NULL) { - /* destroy HTC */ - HTCDestroy(ar->arHtcTarget); - } - if (ar->arHifDevice != NULL) { - /*release the device so we do not get called back on remove incase we - * we're explicity destroyed by module unload */ - HIFReleaseDevice(ar->arHifDevice); - HIFShutDownDevice(ar->arHifDevice); - } - aggr_module_destroy(ar->aggr_cntxt); - - /* Done with cookies */ - ar6000_cookie_cleanup(ar); - - /* cleanup any allocated AMSDU buffers */ - ar6000_cleanup_amsdu_rxbufs(ar); - - ar6000_sysfs_bmi_deinit(ar); - - /* Cleanup BMI */ - BMICleanup(); - - /* Clear the tx counters */ - memset(tx_attempt, 0, sizeof(tx_attempt)); - memset(tx_post, 0, sizeof(tx_post)); - memset(tx_complete, 0, sizeof(tx_complete)); - -#ifdef HTC_RAW_INTERFACE - if (ar->arRawHtc) { - kfree(ar->arRawHtc); - ar->arRawHtc = NULL; - } -#endif - /* Free up the device data structure */ - if (unregister && is_netdev_registered) { - unregister_netdev(dev); - is_netdev_registered = 0; - } - free_netdev(dev); - - ar6k_cfg80211_deinit(ar); - -#ifdef CONFIG_AP_VIRTUL_ADAPTER_SUPPORT - ar6000_remove_ap_interface(); -#endif /*CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT */ - - kfree(ar->fw_otp); - kfree(ar->fw); - kfree(ar->fw_patch); - kfree(ar->fw_data); - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("-ar6000_destroy \n")); -} - -static void disconnect_timer_handler(unsigned long ptr) -{ - struct net_device *dev = (struct net_device *)ptr; - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(dev); - - A_UNTIMEOUT(&ar->disconnect_timer); - - ar6000_init_profile_info(ar); - ar6000_disconnect(ar); -} - -static void ar6000_detect_error(unsigned long ptr) -{ - struct net_device *dev = (struct net_device *)ptr; - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(dev); - WMI_TARGET_ERROR_REPORT_EVENT errEvent; - - AR6000_SPIN_LOCK(&ar->arLock, 0); - - if (ar->arHBChallengeResp.outstanding) { - ar->arHBChallengeResp.missCnt++; - } else { - ar->arHBChallengeResp.missCnt = 0; - } - - if (ar->arHBChallengeResp.missCnt > ar->arHBChallengeResp.missThres) { - /* Send Error Detect event to the application layer and do not reschedule the error detection module timer */ - ar->arHBChallengeResp.missCnt = 0; - ar->arHBChallengeResp.seqNum = 0; - errEvent.errorVal = WMI_TARGET_COM_ERR | WMI_TARGET_FATAL_ERR; - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - return; - } - - /* Generate the sequence number for the next challenge */ - ar->arHBChallengeResp.seqNum++; - ar->arHBChallengeResp.outstanding = true; - - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - - /* Send the challenge on the control channel */ - if (wmi_get_challenge_resp_cmd(ar->arWmi, ar->arHBChallengeResp.seqNum, DRV_HB_CHALLENGE) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to send heart beat challenge\n")); - } - - - /* Reschedule the timer for the next challenge */ - A_TIMEOUT_MS(&ar->arHBChallengeResp.timer, ar->arHBChallengeResp.frequency * 1000, 0); -} - -void ar6000_init_profile_info(struct ar6_softc *ar) -{ - ar->arSsidLen = 0; - A_MEMZERO(ar->arSsid, sizeof(ar->arSsid)); - - switch(fwmode) { - case HI_OPTION_FW_MODE_IBSS: - ar->arNetworkType = ar->arNextMode = ADHOC_NETWORK; - break; - case HI_OPTION_FW_MODE_BSS_STA: - ar->arNetworkType = ar->arNextMode = INFRA_NETWORK; - break; - case HI_OPTION_FW_MODE_AP: - ar->arNetworkType = ar->arNextMode = AP_NETWORK; - break; - } - - ar->arDot11AuthMode = OPEN_AUTH; - ar->arAuthMode = NONE_AUTH; - ar->arPairwiseCrypto = NONE_CRYPT; - ar->arPairwiseCryptoLen = 0; - ar->arGroupCrypto = NONE_CRYPT; - ar->arGroupCryptoLen = 0; - A_MEMZERO(ar->arWepKeyList, sizeof(ar->arWepKeyList)); - A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid)); - A_MEMZERO(ar->arBssid, sizeof(ar->arBssid)); - ar->arBssChannel = 0; -} - -static void -ar6000_init_control_info(struct ar6_softc *ar) -{ - ar->arWmiEnabled = false; - ar6000_init_profile_info(ar); - ar->arDefTxKeyIndex = 0; - A_MEMZERO(ar->arWepKeyList, sizeof(ar->arWepKeyList)); - ar->arChannelHint = 0; - ar->arListenIntervalT = A_DEFAULT_LISTEN_INTERVAL; - ar->arListenIntervalB = 0; - ar->arVersion.host_ver = AR6K_SW_VERSION; - ar->arRssi = 0; - ar->arTxPwr = 0; - ar->arTxPwrSet = false; - ar->arSkipScan = 0; - ar->arBeaconInterval = 0; - ar->arBitRate = 0; - ar->arMaxRetries = 0; - ar->arWmmEnabled = true; - ar->intra_bss = 1; - ar->scan_triggered = 0; - A_MEMZERO(&ar->scParams, sizeof(ar->scParams)); - ar->scParams.shortScanRatio = WMI_SHORTSCANRATIO_DEFAULT; - ar->scParams.scanCtrlFlags = DEFAULT_SCAN_CTRL_FLAGS; - - /* Initialize the AP mode state info */ - { - u8 ctr; - A_MEMZERO((u8 *)ar->sta_list, AP_MAX_NUM_STA * sizeof(sta_t)); - - /* init the Mutexes */ - A_MUTEX_INIT(&ar->mcastpsqLock); - - /* Init the PS queues */ - for (ctr=0; ctr < AP_MAX_NUM_STA ; ctr++) { - A_MUTEX_INIT(&ar->sta_list[ctr].psqLock); - A_NETBUF_QUEUE_INIT(&ar->sta_list[ctr].psq); - } - - ar->ap_profile_flag = 0; - A_NETBUF_QUEUE_INIT(&ar->mcastpsq); - - memcpy(ar->ap_country_code, DEF_AP_COUNTRY_CODE, 3); - ar->ap_wmode = DEF_AP_WMODE_G; - ar->ap_dtim_period = DEF_AP_DTIM; - ar->ap_beacon_interval = DEF_BEACON_INTERVAL; - } -} - -static int -ar6000_open(struct net_device *dev) -{ - unsigned long flags; - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(dev); - - spin_lock_irqsave(&ar->arLock, flags); - - if(ar->arWlanState == WLAN_DISABLED) { - ar->arWlanState = WLAN_ENABLED; - } - - if( ar->arConnected || bypasswmi) { - netif_carrier_on(dev); - /* Wake up the queues */ - netif_wake_queue(dev); - } - else - netif_carrier_off(dev); - - spin_unlock_irqrestore(&ar->arLock, flags); - return 0; -} - -static int -ar6000_close(struct net_device *dev) -{ - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(dev); - netif_stop_queue(dev); - - ar6000_disconnect(ar); - - if(ar->arWmiReady == true) { - if (wmi_scanparams_cmd(ar->arWmi, 0xFFFF, 0, - 0, 0, 0, 0, 0, 0, 0, 0) != 0) { - return -EIO; - } - ar->arWlanState = WLAN_DISABLED; - } - ar6k_cfg80211_scanComplete_event(ar, A_ECANCELED); - - return 0; -} - -/* connect to a service */ -static int ar6000_connectservice(struct ar6_softc *ar, - struct htc_service_connect_req *pConnect, - char *pDesc) -{ - int status; - struct htc_service_connect_resp response; - - do { - - A_MEMZERO(&response,sizeof(response)); - - status = HTCConnectService(ar->arHtcTarget, - pConnect, - &response); - - if (status) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" Failed to connect to %s service status:%d \n", - pDesc, status)); - break; - } - switch (pConnect->ServiceID) { - case WMI_CONTROL_SVC : - if (ar->arWmiEnabled) { - /* set control endpoint for WMI use */ - wmi_set_control_ep(ar->arWmi, response.Endpoint); - } - /* save EP for fast lookup */ - ar->arControlEp = response.Endpoint; - break; - case WMI_DATA_BE_SVC : - arSetAc2EndpointIDMap(ar, WMM_AC_BE, response.Endpoint); - break; - case WMI_DATA_BK_SVC : - arSetAc2EndpointIDMap(ar, WMM_AC_BK, response.Endpoint); - break; - case WMI_DATA_VI_SVC : - arSetAc2EndpointIDMap(ar, WMM_AC_VI, response.Endpoint); - break; - case WMI_DATA_VO_SVC : - arSetAc2EndpointIDMap(ar, WMM_AC_VO, response.Endpoint); - break; - default: - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ServiceID not mapped %d\n", pConnect->ServiceID)); - status = A_EINVAL; - break; - } - - } while (false); - - return status; -} - -void ar6000_TxDataCleanup(struct ar6_softc *ar) -{ - /* flush all the data (non-control) streams - * we only flush packets that are tagged as data, we leave any control packets that - * were in the TX queues alone */ - HTCFlushEndpoint(ar->arHtcTarget, - arAc2EndpointID(ar, WMM_AC_BE), - AR6K_DATA_PKT_TAG); - HTCFlushEndpoint(ar->arHtcTarget, - arAc2EndpointID(ar, WMM_AC_BK), - AR6K_DATA_PKT_TAG); - HTCFlushEndpoint(ar->arHtcTarget, - arAc2EndpointID(ar, WMM_AC_VI), - AR6K_DATA_PKT_TAG); - HTCFlushEndpoint(ar->arHtcTarget, - arAc2EndpointID(ar, WMM_AC_VO), - AR6K_DATA_PKT_TAG); -} - -HTC_ENDPOINT_ID -ar6000_ac2_endpoint_id ( void * devt, u8 ac) -{ - struct ar6_softc *ar = (struct ar6_softc *) devt; - return(arAc2EndpointID(ar, ac)); -} - -u8 ar6000_endpoint_id2_ac(void * devt, HTC_ENDPOINT_ID ep ) -{ - struct ar6_softc *ar = (struct ar6_softc *) devt; - return(arEndpoint2Ac(ar, ep )); -} - -#if defined(CONFIG_ATH6KL_ENABLE_COEXISTENCE) -static int ath6kl_config_btcoex_params(struct ar6_softc *ar) -{ - int r; - WMI_SET_BTCOEX_COLOCATED_BT_DEV_CMD sbcb_cmd; - WMI_SET_BTCOEX_FE_ANT_CMD sbfa_cmd; - - /* Configure the type of BT collocated with WLAN */ - memset(&sbcb_cmd, 0, sizeof(WMI_SET_BTCOEX_COLOCATED_BT_DEV_CMD)); - sbcb_cmd.btcoexCoLocatedBTdev = ATH6KL_BT_DEV; - - r = wmi_set_btcoex_colocated_bt_dev_cmd(ar->arWmi, &sbcb_cmd); - - if (r) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, - ("Unable to set collocated BT type\n")); - return r; - } - - /* Configure the type of BT collocated with WLAN */ - memset(&sbfa_cmd, 0, sizeof(WMI_SET_BTCOEX_FE_ANT_CMD)); - - sbfa_cmd.btcoexFeAntType = ATH6KL_BT_ANTENNA; - - r = wmi_set_btcoex_fe_ant_cmd(ar->arWmi, &sbfa_cmd); - if (r) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, - ("Unable to set fornt end antenna configuration\n")); - return r; - } - - return 0; -} -#else -static int ath6kl_config_btcoex_params(struct ar6_softc *ar) -{ - return 0; -} -#endif /* CONFIG_ATH6KL_ENABLE_COEXISTENCE */ - -/* - * This function applies WLAN specific configuration defined in wlan_config.h - */ -int ar6000_target_config_wlan_params(struct ar6_softc *ar) -{ - int status = 0; - -#ifdef CONFIG_HOST_TCMD_SUPPORT - if (ar->arTargetMode != AR6000_WLAN_MODE) { - return 0; - } -#endif /* CONFIG_HOST_TCMD_SUPPORT */ - - /* - * configure the device for rx dot11 header rules 0,0 are the default values - * therefore this command can be skipped if the inputs are 0,FALSE,FALSE.Required - * if checksum offload is needed. Set RxMetaVersion to 2 - */ - if ((wmi_set_rx_frame_format_cmd(ar->arWmi,ar->rxMetaVersion, processDot11Hdr, processDot11Hdr)) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set the rx frame format.\n")); - status = A_ERROR; - } - - status = ath6kl_config_btcoex_params(ar); - if (status) - return status; - -#if WLAN_CONFIG_IGNORE_POWER_SAVE_FAIL_EVENT_DURING_SCAN - if ((wmi_pmparams_cmd(ar->arWmi, 0, 1, 0, 0, 1, IGNORE_POWER_SAVE_FAIL_EVENT_DURING_SCAN)) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set power save fail event policy\n")); - status = A_ERROR; - } -#endif - -#if WLAN_CONFIG_DONOT_IGNORE_BARKER_IN_ERP - if ((wmi_set_lpreamble_cmd(ar->arWmi, 0, WMI_DONOT_IGNORE_BARKER_IN_ERP)) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set barker preamble policy\n")); - status = A_ERROR; - } -#endif - - if ((wmi_set_keepalive_cmd(ar->arWmi, WLAN_CONFIG_KEEP_ALIVE_INTERVAL)) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set keep alive interval\n")); - status = A_ERROR; - } - -#if WLAN_CONFIG_DISABLE_11N - { - WMI_SET_HT_CAP_CMD htCap; - - memset(&htCap, 0, sizeof(WMI_SET_HT_CAP_CMD)); - htCap.band = 0; - if ((wmi_set_ht_cap_cmd(ar->arWmi, &htCap)) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set ht capabilities \n")); - status = A_ERROR; - } - - htCap.band = 1; - if ((wmi_set_ht_cap_cmd(ar->arWmi, &htCap)) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set ht capabilities \n")); - status = A_ERROR; - } - } -#endif /* WLAN_CONFIG_DISABLE_11N */ - -#ifdef ATH6K_CONFIG_OTA_MODE - if ((wmi_powermode_cmd(ar->arWmi, MAX_PERF_POWER)) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set power mode \n")); - status = A_ERROR; - } -#endif - - if ((wmi_disctimeout_cmd(ar->arWmi, WLAN_CONFIG_DISCONNECT_TIMEOUT)) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set disconnect timeout \n")); - status = A_ERROR; - } - -#if WLAN_CONFIG_DISABLE_TX_BURSTING - if ((wmi_set_wmm_txop(ar->arWmi, WMI_TXOP_DISABLED)) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set txop bursting \n")); - status = A_ERROR; - } -#endif - - return status; -} - -/* This function does one time initialization for the lifetime of the device */ -int ar6000_init(struct net_device *dev) -{ - struct ar6_softc *ar; - int status; - s32 timeleft; - s16 i; - int ret = 0; - - if((ar = ar6k_priv(dev)) == NULL) - { - return -EIO; - } - - if (wlaninitmode == WLAN_INIT_MODE_USR || wlaninitmode == WLAN_INIT_MODE_DRV) { - - ar6000_update_bdaddr(ar); - - if (enablerssicompensation) { - ar6000_copy_cust_data_from_target(ar->arHifDevice, ar->arTargetType); - read_rssi_compensation_param(ar); - for (i=-95; i<=0; i++) { - rssi_compensation_table[0-i] = rssi_compensation_calc(ar,i); - } - } - } - - dev_hold(dev); - rtnl_unlock(); - - /* Do we need to finish the BMI phase */ - if ((wlaninitmode == WLAN_INIT_MODE_USR || wlaninitmode == WLAN_INIT_MODE_DRV) && - (BMIDone(ar->arHifDevice) != 0)) - { - ret = -EIO; - goto ar6000_init_done; - } - - if (!bypasswmi) - { -#if 0 /* TBDXXX */ - if (ar->arVersion.host_ver != ar->arVersion.target_ver) { - A_PRINTF("WARNING: Host version 0x%x does not match Target " - " version 0x%x!\n", - ar->arVersion.host_ver, ar->arVersion.target_ver); - } -#endif - - /* Indicate that WMI is enabled (although not ready yet) */ - ar->arWmiEnabled = true; - if ((ar->arWmi = wmi_init((void *) ar)) == NULL) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s() Failed to initialize WMI.\n", __func__)); - ret = -EIO; - goto ar6000_init_done; - } - - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s() Got WMI @ 0x%lx.\n", __func__, - (unsigned long) ar->arWmi)); - } - - do { - struct htc_service_connect_req connect; - - /* the reason we have to wait for the target here is that the driver layer - * has to init BMI in order to set the host block size, - */ - status = HTCWaitTarget(ar->arHtcTarget); - - if (status) { - break; - } - - A_MEMZERO(&connect,sizeof(connect)); - /* meta data is unused for now */ - connect.pMetaData = NULL; - connect.MetaDataLength = 0; - /* these fields are the same for all service endpoints */ - connect.EpCallbacks.pContext = ar; - connect.EpCallbacks.EpTxCompleteMultiple = ar6000_tx_complete; - connect.EpCallbacks.EpRecv = ar6000_rx; - connect.EpCallbacks.EpRecvRefill = ar6000_rx_refill; - connect.EpCallbacks.EpSendFull = ar6000_tx_queue_full; - /* set the max queue depth so that our ar6000_tx_queue_full handler gets called. - * Linux has the peculiarity of not providing flow control between the - * NIC and the network stack. There is no API to indicate that a TX packet - * was sent which could provide some back pressure to the network stack. - * Under linux you would have to wait till the network stack consumed all sk_buffs - * before any back-flow kicked in. Which isn't very friendly. - * So we have to manage this ourselves */ - connect.MaxSendQueueDepth = MAX_DEFAULT_SEND_QUEUE_DEPTH; - connect.EpCallbacks.RecvRefillWaterMark = AR6000_MAX_RX_BUFFERS / 4; /* set to 25 % */ - if (0 == connect.EpCallbacks.RecvRefillWaterMark) { - connect.EpCallbacks.RecvRefillWaterMark++; - } - /* connect to control service */ - connect.ServiceID = WMI_CONTROL_SVC; - status = ar6000_connectservice(ar, - &connect, - "WMI CONTROL"); - if (status) { - break; - } - - connect.LocalConnectionFlags |= HTC_LOCAL_CONN_FLAGS_ENABLE_SEND_BUNDLE_PADDING; - /* limit the HTC message size on the send path, although we can receive A-MSDU frames of - * 4K, we will only send ethernet-sized (802.3) frames on the send path. */ - connect.MaxSendMsgSize = WMI_MAX_TX_DATA_FRAME_LENGTH; - - /* to reduce the amount of committed memory for larger A_MSDU frames, use the recv-alloc threshold - * mechanism for larger packets */ - connect.EpCallbacks.RecvAllocThreshold = AR6000_BUFFER_SIZE; - connect.EpCallbacks.EpRecvAllocThresh = ar6000_alloc_amsdu_rxbuf; - - /* for the remaining data services set the connection flag to reduce dribbling, - * if configured to do so */ - if (reduce_credit_dribble) { - connect.ConnectionFlags |= HTC_CONNECT_FLAGS_REDUCE_CREDIT_DRIBBLE; - /* the credit dribble trigger threshold is (reduce_credit_dribble - 1) for a value - * of 0-3 */ - connect.ConnectionFlags &= ~HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK; - connect.ConnectionFlags |= - ((u16)reduce_credit_dribble - 1) & HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK; - } - /* connect to best-effort service */ - connect.ServiceID = WMI_DATA_BE_SVC; - - status = ar6000_connectservice(ar, - &connect, - "WMI DATA BE"); - if (status) { - break; - } - - /* connect to back-ground - * map this to WMI LOW_PRI */ - connect.ServiceID = WMI_DATA_BK_SVC; - status = ar6000_connectservice(ar, - &connect, - "WMI DATA BK"); - if (status) { - break; - } - - /* connect to Video service, map this to - * to HI PRI */ - connect.ServiceID = WMI_DATA_VI_SVC; - status = ar6000_connectservice(ar, - &connect, - "WMI DATA VI"); - if (status) { - break; - } - - /* connect to VO service, this is currently not - * mapped to a WMI priority stream due to historical reasons. - * WMI originally defined 3 priorities over 3 mailboxes - * We can change this when WMI is reworked so that priorities are not - * dependent on mailboxes */ - connect.ServiceID = WMI_DATA_VO_SVC; - status = ar6000_connectservice(ar, - &connect, - "WMI DATA VO"); - if (status) { - break; - } - - A_ASSERT(arAc2EndpointID(ar,WMM_AC_BE) != 0); - A_ASSERT(arAc2EndpointID(ar,WMM_AC_BK) != 0); - A_ASSERT(arAc2EndpointID(ar,WMM_AC_VI) != 0); - A_ASSERT(arAc2EndpointID(ar,WMM_AC_VO) != 0); - - /* setup access class priority mappings */ - ar->arAcStreamPriMap[WMM_AC_BK] = 0; /* lowest */ - ar->arAcStreamPriMap[WMM_AC_BE] = 1; /* */ - ar->arAcStreamPriMap[WMM_AC_VI] = 2; /* */ - ar->arAcStreamPriMap[WMM_AC_VO] = 3; /* highest */ - -#ifdef EXPORT_HCI_BRIDGE_INTERFACE - if (setuphci && (NULL != ar6kHciTransCallbacks.setupTransport)) { - struct hci_transport_misc_handles hciHandles; - - hciHandles.netDevice = ar->arNetDev; - hciHandles.hifDevice = ar->arHifDevice; - hciHandles.htcHandle = ar->arHtcTarget; - status = (int)(ar6kHciTransCallbacks.setupTransport(&hciHandles)); - } -#else - if (setuphci) { - /* setup HCI */ - status = ar6000_setup_hci(ar); - } -#endif - - } while (false); - - if (status) { - ret = -EIO; - goto ar6000_init_done; - } - - if (regscanmode) { - u32 param; - - if (BMIReadMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, - hi_option_flag), - (u8 *)¶m, - 4) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, - ("BMIReadMemory forsetting " - "regscanmode failed\n")); - return A_ERROR; - } - - if (regscanmode == 1) - param |= HI_OPTION_SKIP_REG_SCAN; - else if (regscanmode == 2) - param |= HI_OPTION_INIT_REG_SCAN; - - if (BMIWriteMemory(ar->arHifDevice, - HOST_INTEREST_ITEM_ADDRESS(ar, - hi_option_flag), - (u8 *)¶m, - 4) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR, - ("BMIWriteMemory forsetting " - "regscanmode failed\n")); - return A_ERROR; - } - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("Regulatory scan mode set\n")); - } - - /* - * give our connected endpoints some buffers - */ - - ar6000_rx_refill(ar, ar->arControlEp); - ar6000_rx_refill(ar, arAc2EndpointID(ar,WMM_AC_BE)); - - /* - * We will post the receive buffers only for SPE or endpoint ping testing so we are - * making it conditional on the 'bypasswmi' flag. - */ - if (bypasswmi) { - ar6000_rx_refill(ar,arAc2EndpointID(ar,WMM_AC_BK)); - ar6000_rx_refill(ar,arAc2EndpointID(ar,WMM_AC_VI)); - ar6000_rx_refill(ar,arAc2EndpointID(ar,WMM_AC_VO)); - } - - /* allocate some buffers that handle larger AMSDU frames */ - ar6000_refill_amsdu_rxbufs(ar,AR6000_MAX_AMSDU_RX_BUFFERS); - - /* setup credit distribution */ - ar6000_setup_credit_dist(ar->arHtcTarget, &ar->arCreditStateInfo); - - /* Since cookies are used for HTC transports, they should be */ - /* initialized prior to enabling HTC. */ - ar6000_cookie_init(ar); - - /* start HTC */ - status = HTCStart(ar->arHtcTarget); - - if (status) { - if (ar->arWmiEnabled == true) { - wmi_shutdown(ar->arWmi); - ar->arWmiEnabled = false; - ar->arWmi = NULL; - } - ar6000_cookie_cleanup(ar); - ret = -EIO; - goto ar6000_init_done; - } - - if (!bypasswmi) { - /* Wait for Wmi event to be ready */ - timeleft = wait_event_interruptible_timeout(arEvent, - (ar->arWmiReady == true), wmitimeout * HZ); - - if (ar->arVersion.abi_ver != AR6K_ABI_VERSION) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ABI Version mismatch: Host(0x%x), Target(0x%x)\n", AR6K_ABI_VERSION, ar->arVersion.abi_ver)); -#ifndef ATH6K_SKIP_ABI_VERSION_CHECK - ret = -EIO; - goto ar6000_init_done; -#endif /* ATH6K_SKIP_ABI_VERSION_CHECK */ - } - - if(!timeleft || signal_pending(current)) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("WMI is not ready or wait was interrupted\n")); - ret = -EIO; - goto ar6000_init_done; - } - - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s() WMI is ready\n", __func__)); - - /* Communicate the wmi protocol verision to the target */ - if ((ar6000_set_host_app_area(ar)) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set the host app area\n")); - } - ar6000_target_config_wlan_params(ar); - } - - ar->arNumDataEndPts = 1; - - if (bypasswmi) { - /* for tests like endpoint ping, the MAC address needs to be non-zero otherwise - * the data path through a raw socket is disabled */ - dev->dev_addr[0] = 0x00; - dev->dev_addr[1] = 0x01; - dev->dev_addr[2] = 0x02; - dev->dev_addr[3] = 0xAA; - dev->dev_addr[4] = 0xBB; - dev->dev_addr[5] = 0xCC; - } - -ar6000_init_done: - rtnl_lock(); - dev_put(dev); - - return ret; -} - - -void -ar6000_bitrate_rx(void *devt, s32 rateKbps) -{ - struct ar6_softc *ar = (struct ar6_softc *)devt; - - ar->arBitRate = rateKbps; - wake_up(&arEvent); -} - -void -ar6000_ratemask_rx(void *devt, u32 ratemask) -{ - struct ar6_softc *ar = (struct ar6_softc *)devt; - - ar->arRateMask = ratemask; - wake_up(&arEvent); -} - -void -ar6000_txPwr_rx(void *devt, u8 txPwr) -{ - struct ar6_softc *ar = (struct ar6_softc *)devt; - - ar->arTxPwr = txPwr; - wake_up(&arEvent); -} - - -void -ar6000_channelList_rx(void *devt, s8 numChan, u16 *chanList) -{ - struct ar6_softc *ar = (struct ar6_softc *)devt; - - memcpy(ar->arChannelList, chanList, numChan * sizeof (u16)); - ar->arNumChannels = numChan; - - wake_up(&arEvent); -} - -u8 ar6000_ibss_map_epid(struct sk_buff *skb, struct net_device *dev, u32 *mapNo) -{ - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(dev); - u8 *datap; - ATH_MAC_HDR *macHdr; - u32 i, eptMap; - - (*mapNo) = 0; - datap = A_NETBUF_DATA(skb); - macHdr = (ATH_MAC_HDR *)(datap + sizeof(WMI_DATA_HDR)); - if (IEEE80211_IS_MULTICAST(macHdr->dstMac)) { - return ENDPOINT_2; - } - - eptMap = -1; - for (i = 0; i < ar->arNodeNum; i ++) { - if (IEEE80211_ADDR_EQ(macHdr->dstMac, ar->arNodeMap[i].macAddress)) { - (*mapNo) = i + 1; - ar->arNodeMap[i].txPending ++; - return ar->arNodeMap[i].epId; - } - - if ((eptMap == -1) && !ar->arNodeMap[i].txPending) { - eptMap = i; - } - } - - if (eptMap == -1) { - eptMap = ar->arNodeNum; - ar->arNodeNum ++; - A_ASSERT(ar->arNodeNum <= MAX_NODE_NUM); - } - - memcpy(ar->arNodeMap[eptMap].macAddress, macHdr->dstMac, IEEE80211_ADDR_LEN); - - for (i = ENDPOINT_2; i <= ENDPOINT_5; i ++) { - if (!ar->arTxPending[i]) { - ar->arNodeMap[eptMap].epId = i; - break; - } - // No free endpoint is available, start redistribution on the inuse endpoints. - if (i == ENDPOINT_5) { - ar->arNodeMap[eptMap].epId = ar->arNexEpId; - ar->arNexEpId ++; - if (ar->arNexEpId > ENDPOINT_5) { - ar->arNexEpId = ENDPOINT_2; - } - } - } - - (*mapNo) = eptMap + 1; - ar->arNodeMap[eptMap].txPending ++; - - return ar->arNodeMap[eptMap].epId; -} - -#ifdef DEBUG -static void ar6000_dump_skb(struct sk_buff *skb) -{ - u_char *ch; - for (ch = A_NETBUF_DATA(skb); - (unsigned long)ch < ((unsigned long)A_NETBUF_DATA(skb) + - A_NETBUF_LEN(skb)); ch++) - { - AR_DEBUG_PRINTF(ATH_DEBUG_WARN,("%2.2x ", *ch)); - } - AR_DEBUG_PRINTF(ATH_DEBUG_WARN,("\n")); -} -#endif - -#ifdef HTC_TEST_SEND_PKTS -static void DoHTCSendPktsTest(struct ar6_softc *ar, int MapNo, HTC_ENDPOINT_ID eid, struct sk_buff *skb); -#endif - -static int -ar6000_data_tx(struct sk_buff *skb, struct net_device *dev) -{ -#define AC_NOT_MAPPED 99 - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(dev); - u8 ac = AC_NOT_MAPPED; - HTC_ENDPOINT_ID eid = ENDPOINT_UNUSED; - u32 mapNo = 0; - int len; - struct ar_cookie *cookie; - bool checkAdHocPsMapping = false,bMoreData = false; - HTC_TX_TAG htc_tag = AR6K_DATA_PKT_TAG; - u8 dot11Hdr = processDot11Hdr; -#ifdef CONFIG_PM - if (ar->arWowState != WLAN_WOW_STATE_NONE) { - A_NETBUF_FREE(skb); - return 0; - } -#endif /* CONFIG_PM */ - - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_TX,("ar6000_data_tx start - skb=0x%lx, data=0x%lx, len=0x%x\n", - (unsigned long)skb, (unsigned long)A_NETBUF_DATA(skb), - A_NETBUF_LEN(skb))); - - /* If target is not associated */ - if( (!ar->arConnected && !bypasswmi) -#ifdef CONFIG_HOST_TCMD_SUPPORT - /* TCMD doesn't support any data, free the buf and return */ - || (ar->arTargetMode == AR6000_TCMD_MODE) -#endif - ) { - A_NETBUF_FREE(skb); - return 0; - } - - do { - - if (ar->arWmiReady == false && bypasswmi == 0) { - break; - } - -#ifdef BLOCK_TX_PATH_FLAG - if (blocktx) { - break; - } -#endif /* BLOCK_TX_PATH_FLAG */ - - /* AP mode Power save processing */ - /* If the dst STA is in sleep state, queue the pkt in its PS queue */ - - if (ar->arNetworkType == AP_NETWORK) { - ATH_MAC_HDR *datap = (ATH_MAC_HDR *)A_NETBUF_DATA(skb); - sta_t *conn = NULL; - - /* If the dstMac is a Multicast address & atleast one of the - * associated STA is in PS mode, then queue the pkt to the - * mcastq - */ - if (IEEE80211_IS_MULTICAST(datap->dstMac)) { - u8 ctr=0; - bool qMcast=false; - - - for (ctr=0; ctr<AP_MAX_NUM_STA; ctr++) { - if (STA_IS_PWR_SLEEP((&ar->sta_list[ctr]))) { - qMcast = true; - } - } - if(qMcast) { - - /* If this transmit is not because of a Dtim Expiry q it */ - if (ar->DTIMExpired == false) { - bool isMcastqEmpty = false; - - A_MUTEX_LOCK(&ar->mcastpsqLock); - isMcastqEmpty = A_NETBUF_QUEUE_EMPTY(&ar->mcastpsq); - A_NETBUF_ENQUEUE(&ar->mcastpsq, skb); - A_MUTEX_UNLOCK(&ar->mcastpsqLock); - - /* If this is the first Mcast pkt getting queued - * indicate to the target to set the BitmapControl LSB - * of the TIM IE. - */ - if (isMcastqEmpty) { - wmi_set_pvb_cmd(ar->arWmi, MCAST_AID, 1); - } - return 0; - } else { - /* This transmit is because of Dtim expiry. Determine if - * MoreData bit has to be set. - */ - A_MUTEX_LOCK(&ar->mcastpsqLock); - if(!A_NETBUF_QUEUE_EMPTY(&ar->mcastpsq)) { - bMoreData = true; - } - A_MUTEX_UNLOCK(&ar->mcastpsqLock); - } - } - } else { - conn = ieee80211_find_conn(ar, datap->dstMac); - if (conn) { - if (STA_IS_PWR_SLEEP(conn)) { - /* If this transmit is not because of a PsPoll q it*/ - if (!STA_IS_PS_POLLED(conn)) { - bool isPsqEmpty = false; - /* Queue the frames if the STA is sleeping */ - A_MUTEX_LOCK(&conn->psqLock); - isPsqEmpty = A_NETBUF_QUEUE_EMPTY(&conn->psq); - A_NETBUF_ENQUEUE(&conn->psq, skb); - A_MUTEX_UNLOCK(&conn->psqLock); - - /* If this is the first pkt getting queued - * for this STA, update the PVB for this STA - */ - if (isPsqEmpty) { - wmi_set_pvb_cmd(ar->arWmi, conn->aid, 1); - } - - return 0; - } else { - /* This tx is because of a PsPoll. Determine if - * MoreData bit has to be set - */ - A_MUTEX_LOCK(&conn->psqLock); - if (!A_NETBUF_QUEUE_EMPTY(&conn->psq)) { - bMoreData = true; - } - A_MUTEX_UNLOCK(&conn->psqLock); - } - } - } else { - - /* non existent STA. drop the frame */ - A_NETBUF_FREE(skb); - return 0; - } - } - } - - if (ar->arWmiEnabled) { - u8 csumStart=0; - u8 csumDest=0; - u8 csum=skb->ip_summed; - if(csumOffload && (csum==CHECKSUM_PARTIAL)){ - csumStart = (skb->head + skb->csum_start - skb_network_header(skb) + - sizeof(ATH_LLC_SNAP_HDR)); - csumDest=skb->csum_offset+csumStart; - } - if (A_NETBUF_HEADROOM(skb) < dev->hard_header_len - LINUX_HACK_FUDGE_FACTOR) { - struct sk_buff *newbuf; - - /* - * We really should have gotten enough headroom but sometimes - * we still get packets with not enough headroom. Copy the packet. - */ - len = A_NETBUF_LEN(skb); - newbuf = A_NETBUF_ALLOC(len); - if (newbuf == NULL) { - break; - } - A_NETBUF_PUT(newbuf, len); - memcpy(A_NETBUF_DATA(newbuf), A_NETBUF_DATA(skb), len); - A_NETBUF_FREE(skb); - skb = newbuf; - /* fall through and assemble header */ - } - - if (dot11Hdr) { - if (wmi_dot11_hdr_add(ar->arWmi,skb,ar->arNetworkType) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_data_tx-wmi_dot11_hdr_add failed\n")); - break; - } - } else { - if (wmi_dix_2_dot3(ar->arWmi, skb) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_data_tx - wmi_dix_2_dot3 failed\n")); - break; - } - } - if(csumOffload && (csum ==CHECKSUM_PARTIAL)){ - WMI_TX_META_V2 metaV2; - metaV2.csumStart =csumStart; - metaV2.csumDest = csumDest; - metaV2.csumFlags = 0x1;/*instruct target to calculate checksum*/ - if (wmi_data_hdr_add(ar->arWmi, skb, DATA_MSGTYPE, bMoreData, dot11Hdr, - WMI_META_VERSION_2,&metaV2) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_data_tx - wmi_data_hdr_add failed\n")); - break; - } - - } - else - { - if (wmi_data_hdr_add(ar->arWmi, skb, DATA_MSGTYPE, bMoreData, dot11Hdr,0,NULL) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_data_tx - wmi_data_hdr_add failed\n")); - break; - } - } - - - if ((ar->arNetworkType == ADHOC_NETWORK) && - ar->arIbssPsEnable && ar->arConnected) { - /* flag to check adhoc mapping once we take the lock below: */ - checkAdHocPsMapping = true; - - } else { - /* get the stream mapping */ - ac = wmi_implicit_create_pstream(ar->arWmi, skb, 0, ar->arWmmEnabled); - } - - } else { - EPPING_HEADER *eppingHdr; - - eppingHdr = A_NETBUF_DATA(skb); - - if (IS_EPPING_PACKET(eppingHdr)) { - /* the stream ID is mapped to an access class */ - ac = eppingHdr->StreamNo_h; - /* some EPPING packets cannot be dropped no matter what access class it was - * sent on. We can change the packet tag to guarantee it will not get dropped */ - if (IS_EPING_PACKET_NO_DROP(eppingHdr)) { - htc_tag = AR6K_CONTROL_PKT_TAG; - } - - if (ac == HCI_TRANSPORT_STREAM_NUM) { - /* pass this to HCI */ -#ifndef EXPORT_HCI_BRIDGE_INTERFACE - if (!hci_test_send(ar,skb)) { - return 0; - } -#endif - /* set AC to discard this skb */ - ac = AC_NOT_MAPPED; - } else { - /* a quirk of linux, the payload of the frame is 32-bit aligned and thus the addition - * of the HTC header will mis-align the start of the HTC frame, so we add some - * padding which will be stripped off in the target */ - if (EPPING_ALIGNMENT_PAD > 0) { - A_NETBUF_PUSH(skb, EPPING_ALIGNMENT_PAD); - } - } - - } else { - /* not a ping packet, drop it */ - ac = AC_NOT_MAPPED; - } - } - - } while (false); - - /* did we succeed ? */ - if ((ac == AC_NOT_MAPPED) && !checkAdHocPsMapping) { - /* cleanup and exit */ - A_NETBUF_FREE(skb); - AR6000_STAT_INC(ar, tx_dropped); - AR6000_STAT_INC(ar, tx_aborted_errors); - return 0; - } - - cookie = NULL; - - /* take the lock to protect driver data */ - AR6000_SPIN_LOCK(&ar->arLock, 0); - - do { - - if (checkAdHocPsMapping) { - eid = ar6000_ibss_map_epid(skb, dev, &mapNo); - }else { - eid = arAc2EndpointID (ar, ac); - } - /* validate that the endpoint is connected */ - if (eid == 0 || eid == ENDPOINT_UNUSED ) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" eid %d is NOT mapped!\n", eid)); - break; - } - /* allocate resource for this packet */ - cookie = ar6000_alloc_cookie(ar); - - if (cookie != NULL) { - /* update counts while the lock is held */ - ar->arTxPending[eid]++; - ar->arTotalTxDataPending++; - } - - } while (false); - - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - - if (cookie != NULL) { - cookie->arc_bp[0] = (unsigned long)skb; - cookie->arc_bp[1] = mapNo; - SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt, - cookie, - A_NETBUF_DATA(skb), - A_NETBUF_LEN(skb), - eid, - htc_tag); - -#ifdef DEBUG - if (debugdriver >= 3) { - ar6000_dump_skb(skb); - } -#endif -#ifdef HTC_TEST_SEND_PKTS - DoHTCSendPktsTest(ar,mapNo,eid,skb); -#endif - /* HTC interface is asynchronous, if this fails, cleanup will happen in - * the ar6000_tx_complete callback */ - HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt); - } else { - /* no packet to send, cleanup */ - A_NETBUF_FREE(skb); - AR6000_STAT_INC(ar, tx_dropped); - AR6000_STAT_INC(ar, tx_aborted_errors); - } - - return 0; -} - -int -ar6000_acl_data_tx(struct sk_buff *skb, struct net_device *dev) -{ - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(dev); - struct ar_cookie *cookie; - HTC_ENDPOINT_ID eid = ENDPOINT_UNUSED; - - cookie = NULL; - AR6000_SPIN_LOCK(&ar->arLock, 0); - - /* For now we send ACL on BE endpoint: We can also have a dedicated EP */ - eid = arAc2EndpointID (ar, 0); - /* allocate resource for this packet */ - cookie = ar6000_alloc_cookie(ar); - - if (cookie != NULL) { - /* update counts while the lock is held */ - ar->arTxPending[eid]++; - ar->arTotalTxDataPending++; - } - - - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - - if (cookie != NULL) { - cookie->arc_bp[0] = (unsigned long)skb; - cookie->arc_bp[1] = 0; - SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt, - cookie, - A_NETBUF_DATA(skb), - A_NETBUF_LEN(skb), - eid, - AR6K_DATA_PKT_TAG); - - /* HTC interface is asynchronous, if this fails, cleanup will happen in - * the ar6000_tx_complete callback */ - HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt); - } else { - /* no packet to send, cleanup */ - A_NETBUF_FREE(skb); - AR6000_STAT_INC(ar, tx_dropped); - AR6000_STAT_INC(ar, tx_aborted_errors); - } - return 0; -} - - -#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL -static void -tvsub(register struct timeval *out, register struct timeval *in) -{ - if((out->tv_usec -= in->tv_usec) < 0) { - out->tv_sec--; - out->tv_usec += 1000000; - } - out->tv_sec -= in->tv_sec; -} - -void -applyAPTCHeuristics(struct ar6_softc *ar) -{ - u32 duration; - u32 numbytes; - u32 throughput; - struct timeval ts; - int status; - - AR6000_SPIN_LOCK(&ar->arLock, 0); - - if ((enableAPTCHeuristics) && (!aptcTR.timerScheduled)) { - do_gettimeofday(&ts); - tvsub(&ts, &aptcTR.samplingTS); - duration = ts.tv_sec * 1000 + ts.tv_usec / 1000; /* ms */ - numbytes = aptcTR.bytesTransmitted + aptcTR.bytesReceived; - - if (duration > APTC_TRAFFIC_SAMPLING_INTERVAL) { - /* Initialize the time stamp and byte count */ - aptcTR.bytesTransmitted = aptcTR.bytesReceived = 0; - do_gettimeofday(&aptcTR.samplingTS); - - /* Calculate and decide based on throughput thresholds */ - throughput = ((numbytes * 8) / duration); - if (throughput > APTC_UPPER_THROUGHPUT_THRESHOLD) { - /* Disable Sleep and schedule a timer */ - A_ASSERT(ar->arWmiReady == true); - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - status = wmi_powermode_cmd(ar->arWmi, MAX_PERF_POWER); - AR6000_SPIN_LOCK(&ar->arLock, 0); - A_TIMEOUT_MS(&aptcTimer, APTC_TRAFFIC_SAMPLING_INTERVAL, 0); - aptcTR.timerScheduled = true; - } - } - } - - AR6000_SPIN_UNLOCK(&ar->arLock, 0); -} -#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ - -static HTC_SEND_FULL_ACTION ar6000_tx_queue_full(void *Context, struct htc_packet *pPacket) -{ - struct ar6_softc *ar = (struct ar6_softc *)Context; - HTC_SEND_FULL_ACTION action = HTC_SEND_FULL_KEEP; - bool stopNet = false; - HTC_ENDPOINT_ID Endpoint = HTC_GET_ENDPOINT_FROM_PKT(pPacket); - - do { - - if (bypasswmi) { - int accessClass; - - if (HTC_GET_TAG_FROM_PKT(pPacket) == AR6K_CONTROL_PKT_TAG) { - /* don't drop special control packets */ - break; - } - - accessClass = arEndpoint2Ac(ar,Endpoint); - /* for endpoint ping testing drop Best Effort and Background */ - if ((accessClass == WMM_AC_BE) || (accessClass == WMM_AC_BK)) { - action = HTC_SEND_FULL_DROP; - stopNet = false; - } else { - /* keep but stop the netqueues */ - stopNet = true; - } - break; - } - - if (Endpoint == ar->arControlEp) { - /* under normal WMI if this is getting full, then something is running rampant - * the host should not be exhausting the WMI queue with too many commands - * the only exception to this is during testing using endpointping */ - AR6000_SPIN_LOCK(&ar->arLock, 0); - /* set flag to handle subsequent messages */ - ar->arWMIControlEpFull = true; - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("WMI Control Endpoint is FULL!!! \n")); - /* no need to stop the network */ - stopNet = false; - break; - } - - /* if we get here, we are dealing with data endpoints getting full */ - - if (HTC_GET_TAG_FROM_PKT(pPacket) == AR6K_CONTROL_PKT_TAG) { - /* don't drop control packets issued on ANY data endpoint */ - break; - } - - if (ar->arNetworkType == ADHOC_NETWORK) { - /* in adhoc mode, we cannot differentiate traffic priorities so there is no need to - * continue, however we should stop the network */ - stopNet = true; - break; - } - /* the last MAX_HI_COOKIE_NUM "batch" of cookies are reserved for the highest - * active stream */ - if (ar->arAcStreamPriMap[arEndpoint2Ac(ar,Endpoint)] < ar->arHiAcStreamActivePri && - ar->arCookieCount <= MAX_HI_COOKIE_NUM) { - /* this stream's priority is less than the highest active priority, we - * give preference to the highest priority stream by directing - * HTC to drop the packet that overflowed */ - action = HTC_SEND_FULL_DROP; - /* since we are dropping packets, no need to stop the network */ - stopNet = false; - break; - } - - } while (false); - - if (stopNet) { - AR6000_SPIN_LOCK(&ar->arLock, 0); - ar->arNetQueueStopped = true; - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - /* one of the data endpoints queues is getting full..need to stop network stack - * the queue will resume in ar6000_tx_complete() */ - netif_stop_queue(ar->arNetDev); - } - - return action; -} - - -static void -ar6000_tx_complete(void *Context, struct htc_packet_queue *pPacketQueue) -{ - struct ar6_softc *ar = (struct ar6_softc *)Context; - u32 mapNo = 0; - int status; - struct ar_cookie * ar_cookie; - HTC_ENDPOINT_ID eid; - bool wakeEvent = false; - struct sk_buff_head skb_queue; - struct htc_packet *pPacket; - struct sk_buff *pktSkb; - bool flushing = false; - - skb_queue_head_init(&skb_queue); - - /* lock the driver as we update internal state */ - AR6000_SPIN_LOCK(&ar->arLock, 0); - - /* reap completed packets */ - while (!HTC_QUEUE_EMPTY(pPacketQueue)) { - - pPacket = HTC_PACKET_DEQUEUE(pPacketQueue); - - ar_cookie = (struct ar_cookie *)pPacket->pPktContext; - A_ASSERT(ar_cookie); - - status = pPacket->Status; - pktSkb = (struct sk_buff *)ar_cookie->arc_bp[0]; - eid = pPacket->Endpoint; - mapNo = ar_cookie->arc_bp[1]; - - A_ASSERT(pktSkb); - A_ASSERT(pPacket->pBuffer == A_NETBUF_DATA(pktSkb)); - - /* add this to the list, use faster non-lock API */ - __skb_queue_tail(&skb_queue,pktSkb); - - if (!status) { - A_ASSERT(pPacket->ActualLength == A_NETBUF_LEN(pktSkb)); - } - - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_TX,("ar6000_tx_complete skb=0x%lx data=0x%lx len=0x%x eid=%d ", - (unsigned long)pktSkb, (unsigned long)pPacket->pBuffer, - pPacket->ActualLength, - eid)); - - ar->arTxPending[eid]--; - - if ((eid != ar->arControlEp) || bypasswmi) { - ar->arTotalTxDataPending--; - } - - if (eid == ar->arControlEp) - { - if (ar->arWMIControlEpFull) { - /* since this packet completed, the WMI EP is no longer full */ - ar->arWMIControlEpFull = false; - } - - if (ar->arTxPending[eid] == 0) { - wakeEvent = true; - } - } - - if (status) { - if (status == A_ECANCELED) { - /* a packet was flushed */ - flushing = true; - } - AR6000_STAT_INC(ar, tx_errors); - if (status != A_NO_RESOURCE) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s() -TX ERROR, status: 0x%x\n", __func__, - status)); - } - } else { - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_TX,("OK\n")); - flushing = false; - AR6000_STAT_INC(ar, tx_packets); - ar->arNetStats.tx_bytes += A_NETBUF_LEN(pktSkb); -#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL - aptcTR.bytesTransmitted += a_netbuf_to_len(pktSkb); - applyAPTCHeuristics(ar); -#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ - } - - // TODO this needs to be looked at - if ((ar->arNetworkType == ADHOC_NETWORK) && ar->arIbssPsEnable - && (eid != ar->arControlEp) && mapNo) - { - mapNo --; - ar->arNodeMap[mapNo].txPending --; - - if (!ar->arNodeMap[mapNo].txPending && (mapNo == (ar->arNodeNum - 1))) { - u32 i; - for (i = ar->arNodeNum; i > 0; i --) { - if (!ar->arNodeMap[i - 1].txPending) { - A_MEMZERO(&ar->arNodeMap[i - 1], sizeof(struct ar_node_mapping)); - ar->arNodeNum --; - } else { - break; - } - } - } - } - - ar6000_free_cookie(ar, ar_cookie); - - if (ar->arNetQueueStopped) { - ar->arNetQueueStopped = false; - } - } - - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - - /* lock is released, we can freely call other kernel APIs */ - - /* free all skbs in our local list */ - while (!skb_queue_empty(&skb_queue)) { - /* use non-lock version */ - pktSkb = __skb_dequeue(&skb_queue); - A_NETBUF_FREE(pktSkb); - } - - if ((ar->arConnected == true) || bypasswmi) { - if (!flushing) { - /* don't wake the queue if we are flushing, other wise it will just - * keep queueing packets, which will keep failing */ - netif_wake_queue(ar->arNetDev); - } - } - - if (wakeEvent) { - wake_up(&arEvent); - } - -} - -sta_t * -ieee80211_find_conn(struct ar6_softc *ar, u8 *node_addr) -{ - sta_t *conn = NULL; - u8 i, max_conn; - - switch(ar->arNetworkType) { - case AP_NETWORK: - max_conn = AP_MAX_NUM_STA; - break; - default: - max_conn=0; - break; - } - - for (i = 0; i < max_conn; i++) { - if (IEEE80211_ADDR_EQ(node_addr, ar->sta_list[i].mac)) { - conn = &ar->sta_list[i]; - break; - } - } - - return conn; -} - -sta_t *ieee80211_find_conn_for_aid(struct ar6_softc *ar, u8 aid) -{ - sta_t *conn = NULL; - u8 ctr; - - for (ctr = 0; ctr < AP_MAX_NUM_STA; ctr++) { - if (ar->sta_list[ctr].aid == aid) { - conn = &ar->sta_list[ctr]; - break; - } - } - return conn; -} - -/* - * Receive event handler. This is called by HTC when a packet is received - */ -int pktcount; -static void -ar6000_rx(void *Context, struct htc_packet *pPacket) -{ - struct ar6_softc *ar = (struct ar6_softc *)Context; - struct sk_buff *skb = (struct sk_buff *)pPacket->pPktContext; - int minHdrLen; - u8 containsDot11Hdr = 0; - int status = pPacket->Status; - HTC_ENDPOINT_ID ept = pPacket->Endpoint; - - A_ASSERT((status) || - (pPacket->pBuffer == (A_NETBUF_DATA(skb) + HTC_HEADER_LEN))); - - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_RX,("ar6000_rx ar=0x%lx eid=%d, skb=0x%lx, data=0x%lx, len=0x%x status:%d", - (unsigned long)ar, ept, (unsigned long)skb, (unsigned long)pPacket->pBuffer, - pPacket->ActualLength, status)); - if (status) { - if (status != A_ECANCELED) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("RX ERR (%d) \n",status)); - } - } - - /* take lock to protect buffer counts - * and adaptive power throughput state */ - AR6000_SPIN_LOCK(&ar->arLock, 0); - - if (!status) { - AR6000_STAT_INC(ar, rx_packets); - ar->arNetStats.rx_bytes += pPacket->ActualLength; -#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL - aptcTR.bytesReceived += a_netbuf_to_len(skb); - applyAPTCHeuristics(ar); -#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ - - A_NETBUF_PUT(skb, pPacket->ActualLength + HTC_HEADER_LEN); - A_NETBUF_PULL(skb, HTC_HEADER_LEN); - -#ifdef DEBUG - if (debugdriver >= 2) { - ar6000_dump_skb(skb); - } -#endif /* DEBUG */ - } - - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - - skb->dev = ar->arNetDev; - if (status) { - AR6000_STAT_INC(ar, rx_errors); - A_NETBUF_FREE(skb); - } else if (ar->arWmiEnabled == true) { - if (ept == ar->arControlEp) { - /* - * this is a wmi control msg - */ -#ifdef CONFIG_PM - ar6000_check_wow_status(ar, skb, true); -#endif /* CONFIG_PM */ - wmi_control_rx(ar->arWmi, skb); - } else { - WMI_DATA_HDR *dhdr = (WMI_DATA_HDR *)A_NETBUF_DATA(skb); - bool is_amsdu; - u8 tid; - - /* - * This check can be removed if after a while we do not - * see the warning. For now we leave it to ensure - * we drop these frames accordingly in case the - * target generates them for some reason. These - * were used for an internal PAL but that's not - * used or supported anymore. These frames should - * not come up from the target. - */ - if (WARN_ON(WMI_DATA_HDR_GET_DATA_TYPE(dhdr) == - WMI_DATA_HDR_DATA_TYPE_ACL)) { - AR6000_STAT_INC(ar, rx_errors); - A_NETBUF_FREE(skb); - return; - } - -#ifdef CONFIG_PM - ar6000_check_wow_status(ar, NULL, false); -#endif /* CONFIG_PM */ - /* - * this is a wmi data packet - */ - // NWF - - if (processDot11Hdr) { - minHdrLen = sizeof(WMI_DATA_HDR) + sizeof(struct ieee80211_frame) + sizeof(ATH_LLC_SNAP_HDR); - } else { - minHdrLen = sizeof (WMI_DATA_HDR) + sizeof(ATH_MAC_HDR) + - sizeof(ATH_LLC_SNAP_HDR); - } - - /* In the case of AP mode we may receive NULL data frames - * that do not have LLC hdr. They are 16 bytes in size. - * Allow these frames in the AP mode. - * ACL data frames don't follow ethernet frame bounds for - * min length - */ - if (ar->arNetworkType != AP_NETWORK && - ((pPacket->ActualLength < minHdrLen) || - (pPacket->ActualLength > AR6000_MAX_RX_MESSAGE_SIZE))) - { - /* - * packet is too short or too long - */ - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("TOO SHORT or TOO LONG\n")); - AR6000_STAT_INC(ar, rx_errors); - AR6000_STAT_INC(ar, rx_length_errors); - A_NETBUF_FREE(skb); - } else { - u16 seq_no; - u8 meta_type; - -#if 0 - /* Access RSSI values here */ - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("RSSI %d\n", - ((WMI_DATA_HDR *) A_NETBUF_DATA(skb))->rssi)); -#endif - /* Get the Power save state of the STA */ - if (ar->arNetworkType == AP_NETWORK) { - sta_t *conn = NULL; - u8 psState=0,prevPsState; - ATH_MAC_HDR *datap=NULL; - u16 offset; - - meta_type = WMI_DATA_HDR_GET_META(dhdr); - - psState = (((WMI_DATA_HDR *)A_NETBUF_DATA(skb))->info - >> WMI_DATA_HDR_PS_SHIFT) & WMI_DATA_HDR_PS_MASK; - - offset = sizeof(WMI_DATA_HDR); - - switch (meta_type) { - case 0: - break; - case WMI_META_VERSION_1: - offset += sizeof(WMI_RX_META_V1); - break; - case WMI_META_VERSION_2: - offset += sizeof(WMI_RX_META_V2); - break; - default: - break; - } - - datap = (ATH_MAC_HDR *)(A_NETBUF_DATA(skb)+offset); - conn = ieee80211_find_conn(ar, datap->srcMac); - - if (conn) { - /* if there is a change in PS state of the STA, - * take appropriate steps. - * 1. If Sleep-->Awake, flush the psq for the STA - * Clear the PVB for the STA. - * 2. If Awake-->Sleep, Starting queueing frames - * the STA. - */ - prevPsState = STA_IS_PWR_SLEEP(conn); - if (psState) { - STA_SET_PWR_SLEEP(conn); - } else { - STA_CLR_PWR_SLEEP(conn); - } - - if (prevPsState ^ STA_IS_PWR_SLEEP(conn)) { - - if (!STA_IS_PWR_SLEEP(conn)) { - - A_MUTEX_LOCK(&conn->psqLock); - while (!A_NETBUF_QUEUE_EMPTY(&conn->psq)) { - struct sk_buff *skb=NULL; - - skb = A_NETBUF_DEQUEUE(&conn->psq); - A_MUTEX_UNLOCK(&conn->psqLock); - ar6000_data_tx(skb,ar->arNetDev); - A_MUTEX_LOCK(&conn->psqLock); - } - A_MUTEX_UNLOCK(&conn->psqLock); - /* Clear the PVB for this STA */ - wmi_set_pvb_cmd(ar->arWmi, conn->aid, 0); - } - } - } else { - /* This frame is from a STA that is not associated*/ - A_ASSERT(false); - } - - /* Drop NULL data frames here */ - if((pPacket->ActualLength < minHdrLen) || - (pPacket->ActualLength > AR6000_MAX_RX_MESSAGE_SIZE)) { - A_NETBUF_FREE(skb); - goto rx_done; - } - } - - is_amsdu = WMI_DATA_HDR_IS_AMSDU(dhdr) ? true : false; - tid = WMI_DATA_HDR_GET_UP(dhdr); - seq_no = WMI_DATA_HDR_GET_SEQNO(dhdr); - meta_type = WMI_DATA_HDR_GET_META(dhdr); - containsDot11Hdr = WMI_DATA_HDR_GET_DOT11(dhdr); - - wmi_data_hdr_remove(ar->arWmi, skb); - - switch (meta_type) { - case WMI_META_VERSION_1: - { - WMI_RX_META_V1 *pMeta = (WMI_RX_META_V1 *)A_NETBUF_DATA(skb); - A_PRINTF("META %d %d %d %d %x\n", pMeta->status, pMeta->rix, pMeta->rssi, pMeta->channel, pMeta->flags); - A_NETBUF_PULL((void*)skb, sizeof(WMI_RX_META_V1)); - break; - } - case WMI_META_VERSION_2: - { - WMI_RX_META_V2 *pMeta = (WMI_RX_META_V2 *)A_NETBUF_DATA(skb); - if(pMeta->csumFlags & 0x1){ - skb->ip_summed=CHECKSUM_COMPLETE; - skb->csum=(pMeta->csum); - } - A_NETBUF_PULL((void*)skb, sizeof(WMI_RX_META_V2)); - break; - } - default: - break; - } - - A_ASSERT(status == 0); - - /* NWF: print the 802.11 hdr bytes */ - if(containsDot11Hdr) { - status = wmi_dot11_hdr_remove(ar->arWmi,skb); - } else if(!is_amsdu) { - status = wmi_dot3_2_dix(skb); - } - - if (status) { - /* Drop frames that could not be processed (lack of memory, etc.) */ - A_NETBUF_FREE(skb); - goto rx_done; - } - - if ((ar->arNetDev->flags & IFF_UP) == IFF_UP) { - if (ar->arNetworkType == AP_NETWORK) { - struct sk_buff *skb1 = NULL; - ATH_MAC_HDR *datap; - - datap = (ATH_MAC_HDR *)A_NETBUF_DATA(skb); - if (IEEE80211_IS_MULTICAST(datap->dstMac)) { - /* Bcast/Mcast frames should be sent to the OS - * stack as well as on the air. - */ - skb1 = skb_copy(skb,GFP_ATOMIC); - } else { - /* Search for a connected STA with dstMac as - * the Mac address. If found send the frame to - * it on the air else send the frame up the - * stack - */ - sta_t *conn = NULL; - conn = ieee80211_find_conn(ar, datap->dstMac); - - if (conn && ar->intra_bss) { - skb1 = skb; - skb = NULL; - } else if(conn && !ar->intra_bss) { - A_NETBUF_FREE(skb); - skb = NULL; - } - } - if (skb1) { - ar6000_data_tx(skb1, ar->arNetDev); - } - } - } - aggr_process_recv_frm(ar->aggr_cntxt, tid, seq_no, is_amsdu, (void **)&skb); - ar6000_deliver_frames_to_nw_stack((void *) ar->arNetDev, (void *)skb); - } - } - } else { - if (EPPING_ALIGNMENT_PAD > 0) { - A_NETBUF_PULL(skb, EPPING_ALIGNMENT_PAD); - } - ar6000_deliver_frames_to_nw_stack((void *)ar->arNetDev, (void *)skb); - } - -rx_done: - - return; -} - -static void -ar6000_deliver_frames_to_nw_stack(void *dev, void *osbuf) -{ - struct sk_buff *skb = (struct sk_buff *)osbuf; - - if(skb) { - skb->dev = dev; - if ((skb->dev->flags & IFF_UP) == IFF_UP) { -#ifdef CONFIG_PM - ar6000_check_wow_status((struct ar6_softc *)ar6k_priv(dev), skb, false); -#endif /* CONFIG_PM */ - skb->protocol = eth_type_trans(skb, skb->dev); - /* - * If this routine is called on a ISR (Hard IRQ) or DSR (Soft IRQ) - * or tasklet use the netif_rx to deliver the packet to the stack - * netif_rx will queue the packet onto the receive queue and mark - * the softirq thread has a pending action to complete. Kernel will - * schedule the softIrq kernel thread after processing the DSR. - * - * If this routine is called on a process context, use netif_rx_ni - * which will schedle the softIrq kernel thread after queuing the packet. - */ - if (in_interrupt()) { - netif_rx(skb); - } else { - netif_rx_ni(skb); - } - } else { - A_NETBUF_FREE(skb); - } - } -} - -#if 0 -static void -ar6000_deliver_frames_to_bt_stack(void *dev, void *osbuf) -{ - struct sk_buff *skb = (struct sk_buff *)osbuf; - - if(skb) { - skb->dev = dev; - if ((skb->dev->flags & IFF_UP) == IFF_UP) { - skb->protocol = htons(ETH_P_CONTROL); - netif_rx(skb); - } else { - A_NETBUF_FREE(skb); - } - } -} -#endif - -static void -ar6000_rx_refill(void *Context, HTC_ENDPOINT_ID Endpoint) -{ - struct ar6_softc *ar = (struct ar6_softc *)Context; - void *osBuf; - int RxBuffers; - int buffersToRefill; - struct htc_packet *pPacket; - struct htc_packet_queue queue; - - buffersToRefill = (int)AR6000_MAX_RX_BUFFERS - - HTCGetNumRecvBuffers(ar->arHtcTarget, Endpoint); - - if (buffersToRefill <= 0) { - /* fast return, nothing to fill */ - return; - } - - INIT_HTC_PACKET_QUEUE(&queue); - - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_RX,("ar6000_rx_refill: providing htc with %d buffers at eid=%d\n", - buffersToRefill, Endpoint)); - - for (RxBuffers = 0; RxBuffers < buffersToRefill; RxBuffers++) { - osBuf = A_NETBUF_ALLOC(AR6000_BUFFER_SIZE); - if (NULL == osBuf) { - break; - } - /* the HTC packet wrapper is at the head of the reserved area - * in the skb */ - pPacket = (struct htc_packet *)(A_NETBUF_HEAD(osBuf)); - /* set re-fill info */ - SET_HTC_PACKET_INFO_RX_REFILL(pPacket,osBuf,A_NETBUF_DATA(osBuf),AR6000_BUFFER_SIZE,Endpoint); - /* add to queue */ - HTC_PACKET_ENQUEUE(&queue,pPacket); - } - - if (!HTC_QUEUE_EMPTY(&queue)) { - /* add packets */ - HTCAddReceivePktMultiple(ar->arHtcTarget, &queue); - } - -} - - /* clean up our amsdu buffer list */ -static void ar6000_cleanup_amsdu_rxbufs(struct ar6_softc *ar) -{ - struct htc_packet *pPacket; - void *osBuf; - - /* empty AMSDU buffer queue and free OS bufs */ - while (true) { - - AR6000_SPIN_LOCK(&ar->arLock, 0); - pPacket = HTC_PACKET_DEQUEUE(&ar->amsdu_rx_buffer_queue); - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - - if (NULL == pPacket) { - break; - } - - osBuf = pPacket->pPktContext; - if (NULL == osBuf) { - A_ASSERT(false); - break; - } - - A_NETBUF_FREE(osBuf); - } - -} - - - /* refill the amsdu buffer list */ -static void ar6000_refill_amsdu_rxbufs(struct ar6_softc *ar, int Count) -{ - struct htc_packet *pPacket; - void *osBuf; - - while (Count > 0) { - osBuf = A_NETBUF_ALLOC(AR6000_AMSDU_BUFFER_SIZE); - if (NULL == osBuf) { - break; - } - /* the HTC packet wrapper is at the head of the reserved area - * in the skb */ - pPacket = (struct htc_packet *)(A_NETBUF_HEAD(osBuf)); - /* set re-fill info */ - SET_HTC_PACKET_INFO_RX_REFILL(pPacket,osBuf,A_NETBUF_DATA(osBuf),AR6000_AMSDU_BUFFER_SIZE,0); - - AR6000_SPIN_LOCK(&ar->arLock, 0); - /* put it in the list */ - HTC_PACKET_ENQUEUE(&ar->amsdu_rx_buffer_queue,pPacket); - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - Count--; - } - -} - - /* callback to allocate a large receive buffer for a pending packet. This function is called when - * an HTC packet arrives whose length exceeds a threshold value - * - * We use a pre-allocated list of buffers of maximum AMSDU size (4K). Under linux it is more optimal to - * keep the allocation size the same to optimize cached-slab allocations. - * - * */ -static struct htc_packet *ar6000_alloc_amsdu_rxbuf(void *Context, HTC_ENDPOINT_ID Endpoint, int Length) -{ - struct htc_packet *pPacket = NULL; - struct ar6_softc *ar = (struct ar6_softc *)Context; - int refillCount = 0; - - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_RX,("ar6000_alloc_amsdu_rxbuf: eid=%d, Length:%d\n",Endpoint,Length)); - - do { - - if (Length <= AR6000_BUFFER_SIZE) { - /* shouldn't be getting called on normal sized packets */ - A_ASSERT(false); - break; - } - - if (Length > AR6000_AMSDU_BUFFER_SIZE) { - A_ASSERT(false); - break; - } - - AR6000_SPIN_LOCK(&ar->arLock, 0); - /* allocate a packet from the list */ - pPacket = HTC_PACKET_DEQUEUE(&ar->amsdu_rx_buffer_queue); - /* see if we need to refill again */ - refillCount = AR6000_MAX_AMSDU_RX_BUFFERS - HTC_PACKET_QUEUE_DEPTH(&ar->amsdu_rx_buffer_queue); - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - - if (NULL == pPacket) { - break; - } - /* set actual endpoint ID */ - pPacket->Endpoint = Endpoint; - - } while (false); - - if (refillCount >= AR6000_AMSDU_REFILL_THRESHOLD) { - ar6000_refill_amsdu_rxbufs(ar,refillCount); - } - - return pPacket; -} - -static void -ar6000_set_multicast_list(struct net_device *dev) -{ - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000: Multicast filter not supported\n")); -} - -static struct net_device_stats * -ar6000_get_stats(struct net_device *dev) -{ - struct ar6_softc *ar = (struct ar6_softc *)ar6k_priv(dev); - return &ar->arNetStats; -} - -void -ar6000_ready_event(void *devt, u8 *datap, u8 phyCap, u32 sw_ver, u32 abi_ver) -{ - struct ar6_softc *ar = (struct ar6_softc *)devt; - struct net_device *dev = ar->arNetDev; - - memcpy(dev->dev_addr, datap, AR6000_ETH_ADDR_LEN); - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("mac address = %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n", - dev->dev_addr[0], dev->dev_addr[1], - dev->dev_addr[2], dev->dev_addr[3], - dev->dev_addr[4], dev->dev_addr[5])); - - ar->arPhyCapability = phyCap; - ar->arVersion.wlan_ver = sw_ver; - ar->arVersion.abi_ver = abi_ver; - - snprintf(ar->wdev->wiphy->fw_version, sizeof(ar->wdev->wiphy->fw_version), - "%u:%u:%u:%u", - (ar->arVersion.wlan_ver & 0xf0000000) >> 28, - (ar->arVersion.wlan_ver & 0x0f000000) >> 24, - (ar->arVersion.wlan_ver & 0x00ff0000) >> 16, - (ar->arVersion.wlan_ver & 0x0000ffff)); - - /* Indicate to the waiting thread that the ready event was received */ - ar->arWmiReady = true; - wake_up(&arEvent); -} - -void ar6000_install_static_wep_keys(struct ar6_softc *ar) -{ - u8 index; - u8 keyUsage; - - for (index = WMI_MIN_KEY_INDEX; index <= WMI_MAX_KEY_INDEX; index++) { - if (ar->arWepKeyList[index].arKeyLen) { - keyUsage = GROUP_USAGE; - if (index == ar->arDefTxKeyIndex) { - keyUsage |= TX_USAGE; - } - wmi_addKey_cmd(ar->arWmi, - index, - WEP_CRYPT, - keyUsage, - ar->arWepKeyList[index].arKeyLen, - NULL, - ar->arWepKeyList[index].arKey, KEY_OP_INIT_VAL, NULL, - NO_SYNC_WMIFLAG); - } - } -} - -void -add_new_sta(struct ar6_softc *ar, u8 *mac, u16 aid, u8 *wpaie, - u8 ielen, u8 keymgmt, u8 ucipher, u8 auth) -{ - u8 free_slot=aid-1; - - memcpy(ar->sta_list[free_slot].mac, mac, ATH_MAC_LEN); - memcpy(ar->sta_list[free_slot].wpa_ie, wpaie, ielen); - ar->sta_list[free_slot].aid = aid; - ar->sta_list[free_slot].keymgmt = keymgmt; - ar->sta_list[free_slot].ucipher = ucipher; - ar->sta_list[free_slot].auth = auth; - ar->sta_list_index = ar->sta_list_index | (1 << free_slot); - ar->arAPStats.sta[free_slot].aid = aid; -} - -void -ar6000_connect_event(struct ar6_softc *ar, u16 channel, u8 *bssid, - u16 listenInterval, u16 beaconInterval, - NETWORK_TYPE networkType, u8 beaconIeLen, - u8 assocReqLen, u8 assocRespLen, - u8 *assocInfo) -{ - union iwreq_data wrqu; - int i, beacon_ie_pos, assoc_resp_ie_pos, assoc_req_ie_pos; - static const char *tag1 = "ASSOCINFO(ReqIEs="; - static const char *tag2 = "ASSOCRESPIE="; - static const char *beaconIetag = "BEACONIE="; - char buf[WMI_CONTROL_MSG_MAX_LEN * 2 + strlen(tag1) + 1]; - char *pos; - u8 key_op_ctrl; - unsigned long flags; - struct ieee80211req_key *ik; - CRYPTO_TYPE keyType = NONE_CRYPT; - - if(ar->arNetworkType & AP_NETWORK) { - struct net_device *dev = ar->arNetDev; - if(memcmp(dev->dev_addr, bssid, ATH_MAC_LEN)==0) { - ar->arACS = channel; - ik = &ar->ap_mode_bkey; - - switch(ar->arAuthMode) { - case NONE_AUTH: - if(ar->arPairwiseCrypto == WEP_CRYPT) { - ar6000_install_static_wep_keys(ar); - } -#ifdef WAPI_ENABLE - else if(ar->arPairwiseCrypto == WAPI_CRYPT) { - ap_set_wapi_key(ar, ik); - } -#endif - break; - case WPA_PSK_AUTH: - case WPA2_PSK_AUTH: - case (WPA_PSK_AUTH|WPA2_PSK_AUTH): - switch (ik->ik_type) { - case IEEE80211_CIPHER_TKIP: - keyType = TKIP_CRYPT; - break; - case IEEE80211_CIPHER_AES_CCM: - keyType = AES_CRYPT; - break; - default: - goto skip_key; - } - wmi_addKey_cmd(ar->arWmi, ik->ik_keyix, keyType, GROUP_USAGE, - ik->ik_keylen, (u8 *)&ik->ik_keyrsc, - ik->ik_keydata, KEY_OP_INIT_VAL, ik->ik_macaddr, - SYNC_BOTH_WMIFLAG); - - break; - } -skip_key: - ar->arConnected = true; - return; - } - - A_PRINTF("NEW STA %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x \n " - " AID=%d \n", bssid[0], bssid[1], bssid[2], - bssid[3], bssid[4], bssid[5], channel); - switch ((listenInterval>>8)&0xFF) { - case OPEN_AUTH: - A_PRINTF("AUTH: OPEN\n"); - break; - case SHARED_AUTH: - A_PRINTF("AUTH: SHARED\n"); - break; - default: - A_PRINTF("AUTH: Unknown\n"); - break; - } - switch (listenInterval&0xFF) { - case WPA_PSK_AUTH: - A_PRINTF("KeyMgmt: WPA-PSK\n"); - break; - case WPA2_PSK_AUTH: - A_PRINTF("KeyMgmt: WPA2-PSK\n"); - break; - default: - A_PRINTF("KeyMgmt: NONE\n"); - break; - } - switch (beaconInterval) { - case AES_CRYPT: - A_PRINTF("Cipher: AES\n"); - break; - case TKIP_CRYPT: - A_PRINTF("Cipher: TKIP\n"); - break; - case WEP_CRYPT: - A_PRINTF("Cipher: WEP\n"); - break; -#ifdef WAPI_ENABLE - case WAPI_CRYPT: - A_PRINTF("Cipher: WAPI\n"); - break; -#endif - default: - A_PRINTF("Cipher: NONE\n"); - break; - } - - add_new_sta(ar, bssid, channel /*aid*/, - assocInfo /* WPA IE */, assocRespLen /* IE len */, - listenInterval&0xFF /* Keymgmt */, beaconInterval /* cipher */, - (listenInterval>>8)&0xFF /* auth alg */); - - /* Send event to application */ - A_MEMZERO(&wrqu, sizeof(wrqu)); - memcpy(wrqu.addr.sa_data, bssid, ATH_MAC_LEN); - wireless_send_event(ar->arNetDev, IWEVREGISTERED, &wrqu, NULL); - /* In case the queue is stopped when we switch modes, this will - * wake it up - */ - netif_wake_queue(ar->arNetDev); - return; - } - - ar6k_cfg80211_connect_event(ar, channel, bssid, - listenInterval, beaconInterval, - networkType, beaconIeLen, - assocReqLen, assocRespLen, - assocInfo); - - memcpy(ar->arBssid, bssid, sizeof(ar->arBssid)); - ar->arBssChannel = channel; - - A_PRINTF("AR6000 connected event on freq %d ", channel); - A_PRINTF("with bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x " - " listenInterval=%d, beaconInterval = %d, beaconIeLen = %d assocReqLen=%d" - " assocRespLen =%d\n", - bssid[0], bssid[1], bssid[2], - bssid[3], bssid[4], bssid[5], - listenInterval, beaconInterval, - beaconIeLen, assocReqLen, assocRespLen); - if (networkType & ADHOC_NETWORK) { - if (networkType & ADHOC_CREATOR) { - A_PRINTF("Network: Adhoc (Creator)\n"); - } else { - A_PRINTF("Network: Adhoc (Joiner)\n"); - } - } else { - A_PRINTF("Network: Infrastructure\n"); - } - - if ((ar->arNetworkType == INFRA_NETWORK)) { - wmi_listeninterval_cmd(ar->arWmi, ar->arListenIntervalT, ar->arListenIntervalB); - } - - if (beaconIeLen && (sizeof(buf) > (9 + beaconIeLen * 2))) { - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\nBeaconIEs= ")); - - beacon_ie_pos = 0; - A_MEMZERO(buf, sizeof(buf)); - sprintf(buf, "%s", beaconIetag); - pos = buf + 9; - for (i = beacon_ie_pos; i < beacon_ie_pos + beaconIeLen; i++) { - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("%2.2x ", assocInfo[i])); - sprintf(pos, "%2.2x", assocInfo[i]); - pos += 2; - } - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\n")); - - A_MEMZERO(&wrqu, sizeof(wrqu)); - wrqu.data.length = strlen(buf); - wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf); - } - - if (assocRespLen && (sizeof(buf) > (12 + (assocRespLen * 2)))) - { - assoc_resp_ie_pos = beaconIeLen + assocReqLen + - sizeof(u16) + /* capinfo*/ - sizeof(u16) + /* status Code */ - sizeof(u16) ; /* associd */ - A_MEMZERO(buf, sizeof(buf)); - sprintf(buf, "%s", tag2); - pos = buf + 12; - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\nAssocRespIEs= ")); - /* - * The Association Response Frame w.o. the WLAN header is delivered to - * the host, so skip over to the IEs - */ - for (i = assoc_resp_ie_pos; i < assoc_resp_ie_pos + assocRespLen - 6; i++) - { - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("%2.2x ", assocInfo[i])); - sprintf(pos, "%2.2x", assocInfo[i]); - pos += 2; - } - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\n")); - - A_MEMZERO(&wrqu, sizeof(wrqu)); - wrqu.data.length = strlen(buf); - wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf); - } - - if (assocReqLen && (sizeof(buf) > (17 + (assocReqLen * 2)))) { - /* - * assoc Request includes capability and listen interval. Skip these. - */ - assoc_req_ie_pos = beaconIeLen + - sizeof(u16) + /* capinfo*/ - sizeof(u16); /* listen interval */ - - A_MEMZERO(buf, sizeof(buf)); - sprintf(buf, "%s", tag1); - pos = buf + 17; - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("AssocReqIEs= ")); - for (i = assoc_req_ie_pos; i < assoc_req_ie_pos + assocReqLen - 4; i++) { - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("%2.2x ", assocInfo[i])); - sprintf(pos, "%2.2x", assocInfo[i]); - pos += 2; - } - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\n")); - - A_MEMZERO(&wrqu, sizeof(wrqu)); - wrqu.data.length = strlen(buf); - wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf); - } - - if (ar->user_savedkeys_stat == USER_SAVEDKEYS_STAT_RUN && - ar->user_saved_keys.keyOk == true) - { - key_op_ctrl = KEY_OP_VALID_MASK & ~KEY_OP_INIT_TSC; - - if (ar->user_key_ctrl & AR6000_USER_SETKEYS_RSC_UNCHANGED) { - key_op_ctrl &= ~KEY_OP_INIT_RSC; - } else { - key_op_ctrl |= KEY_OP_INIT_RSC; - } - ar6000_reinstall_keys(ar, key_op_ctrl); - } - - netif_wake_queue(ar->arNetDev); - - /* Update connect & link status atomically */ - spin_lock_irqsave(&ar->arLock, flags); - ar->arConnected = true; - ar->arConnectPending = false; - netif_carrier_on(ar->arNetDev); - spin_unlock_irqrestore(&ar->arLock, flags); - /* reset the rx aggr state */ - aggr_reset_state(ar->aggr_cntxt); - reconnect_flag = 0; - - A_MEMZERO(&wrqu, sizeof(wrqu)); - memcpy(wrqu.addr.sa_data, bssid, IEEE80211_ADDR_LEN); - wrqu.addr.sa_family = ARPHRD_ETHER; - wireless_send_event(ar->arNetDev, SIOCGIWAP, &wrqu, NULL); - if ((ar->arNetworkType == ADHOC_NETWORK) && ar->arIbssPsEnable) { - A_MEMZERO(ar->arNodeMap, sizeof(ar->arNodeMap)); - ar->arNodeNum = 0; - ar->arNexEpId = ENDPOINT_2; - } - if (!ar->arUserBssFilter) { - wmi_bssfilter_cmd(ar->arWmi, NONE_BSS_FILTER, 0); - } - -} - -void ar6000_set_numdataendpts(struct ar6_softc *ar, u32 num) -{ - A_ASSERT(num <= (HTC_MAILBOX_NUM_MAX - 1)); - ar->arNumDataEndPts = num; -} - -void -sta_cleanup(struct ar6_softc *ar, u8 i) -{ - struct sk_buff *skb; - - /* empty the queued pkts in the PS queue if any */ - A_MUTEX_LOCK(&ar->sta_list[i].psqLock); - while (!A_NETBUF_QUEUE_EMPTY(&ar->sta_list[i].psq)) { - skb = A_NETBUF_DEQUEUE(&ar->sta_list[i].psq); - A_NETBUF_FREE(skb); - } - A_MUTEX_UNLOCK(&ar->sta_list[i].psqLock); - - /* Zero out the state fields */ - A_MEMZERO(&ar->arAPStats.sta[ar->sta_list[i].aid-1], sizeof(WMI_PER_STA_STAT)); - A_MEMZERO(&ar->sta_list[i].mac, ATH_MAC_LEN); - A_MEMZERO(&ar->sta_list[i].wpa_ie, IEEE80211_MAX_IE); - ar->sta_list[i].aid = 0; - ar->sta_list[i].flags = 0; - - ar->sta_list_index = ar->sta_list_index & ~(1 << i); - -} - -u8 remove_sta(struct ar6_softc *ar, u8 *mac, u16 reason) -{ - u8 i, removed=0; - - if(IS_MAC_NULL(mac)) { - return removed; - } - - if(IS_MAC_BCAST(mac)) { - A_PRINTF("DEL ALL STA\n"); - for(i=0; i < AP_MAX_NUM_STA; i++) { - if(!IS_MAC_NULL(ar->sta_list[i].mac)) { - sta_cleanup(ar, i); - removed = 1; - } - } - } else { - for(i=0; i < AP_MAX_NUM_STA; i++) { - if(memcmp(ar->sta_list[i].mac, mac, ATH_MAC_LEN)==0) { - A_PRINTF("DEL STA %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x " - " aid=%d REASON=%d\n", mac[0], mac[1], mac[2], - mac[3], mac[4], mac[5], ar->sta_list[i].aid, reason); - - sta_cleanup(ar, i); - removed = 1; - break; - } - } - } - return removed; -} - -void -ar6000_disconnect_event(struct ar6_softc *ar, u8 reason, u8 *bssid, - u8 assocRespLen, u8 *assocInfo, u16 protocolReasonStatus) -{ - u8 i; - unsigned long flags; - union iwreq_data wrqu; - - if(ar->arNetworkType & AP_NETWORK) { - union iwreq_data wrqu; - struct sk_buff *skb; - - if(!remove_sta(ar, bssid, protocolReasonStatus)) { - return; - } - - /* If there are no more associated STAs, empty the mcast PS q */ - if (ar->sta_list_index == 0) { - A_MUTEX_LOCK(&ar->mcastpsqLock); - while (!A_NETBUF_QUEUE_EMPTY(&ar->mcastpsq)) { - skb = A_NETBUF_DEQUEUE(&ar->mcastpsq); - A_NETBUF_FREE(skb); - } - A_MUTEX_UNLOCK(&ar->mcastpsqLock); - - /* Clear the LSB of the BitMapCtl field of the TIM IE */ - if (ar->arWmiReady) { - wmi_set_pvb_cmd(ar->arWmi, MCAST_AID, 0); - } - } - - if(!IS_MAC_BCAST(bssid)) { - /* Send event to application */ - A_MEMZERO(&wrqu, sizeof(wrqu)); - memcpy(wrqu.addr.sa_data, bssid, ATH_MAC_LEN); - wireless_send_event(ar->arNetDev, IWEVEXPIRED, &wrqu, NULL); - } - - ar->arConnected = false; - return; - } - - ar6k_cfg80211_disconnect_event(ar, reason, bssid, - assocRespLen, assocInfo, - protocolReasonStatus); - - /* Send disconnect event to supplicant */ - A_MEMZERO(&wrqu, sizeof(wrqu)); - wrqu.addr.sa_family = ARPHRD_ETHER; - wireless_send_event(ar->arNetDev, SIOCGIWAP, &wrqu, NULL); - - /* it is necessary to clear the host-side rx aggregation state */ - aggr_reset_state(ar->aggr_cntxt); - - A_UNTIMEOUT(&ar->disconnect_timer); - - A_PRINTF("AR6000 disconnected"); - if (bssid[0] || bssid[1] || bssid[2] || bssid[3] || bssid[4] || bssid[5]) { - A_PRINTF(" from %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ", - bssid[0], bssid[1], bssid[2], bssid[3], bssid[4], bssid[5]); - } - - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\nDisconnect Reason is %d", reason)); - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\nProtocol Reason/Status Code is %d", protocolReasonStatus)); - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\nAssocResp Frame = %s", - assocRespLen ? " " : "NULL")); - for (i = 0; i < assocRespLen; i++) { - if (!(i % 0x10)) { - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\n")); - } - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("%2.2x ", assocInfo[i])); - } - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\n")); - /* - * If the event is due to disconnect cmd from the host, only they the target - * would stop trying to connect. Under any other condition, target would - * keep trying to connect. - * - */ - if( reason == DISCONNECT_CMD) - { - if ((!ar->arUserBssFilter) && (ar->arWmiReady)) { - wmi_bssfilter_cmd(ar->arWmi, NONE_BSS_FILTER, 0); - } - } else { - ar->arConnectPending = true; - if (((reason == ASSOC_FAILED) && (protocolReasonStatus == 0x11)) || - ((reason == ASSOC_FAILED) && (protocolReasonStatus == 0x0) && (reconnect_flag == 1))) { - ar->arConnected = true; - return; - } - } - - if ((reason == NO_NETWORK_AVAIL) && (ar->arWmiReady)) - { - bss_t *pWmiSsidnode = NULL; - - /* remove the current associated bssid node */ - wmi_free_node (ar->arWmi, bssid); - - /* - * In case any other same SSID nodes are present - * remove it, since those nodes also not available now - */ - do - { - /* - * Find the nodes based on SSID and remove it - * NOTE :: This case will not work out for Hidden-SSID - */ - pWmiSsidnode = wmi_find_Ssidnode (ar->arWmi, ar->arSsid, ar->arSsidLen, false, true); - - if (pWmiSsidnode) - { - wmi_free_node (ar->arWmi, pWmiSsidnode->ni_macaddr); - } - - } while (pWmiSsidnode); - } - - /* Update connect & link status atomically */ - spin_lock_irqsave(&ar->arLock, flags); - ar->arConnected = false; - netif_carrier_off(ar->arNetDev); - spin_unlock_irqrestore(&ar->arLock, flags); - - if( (reason != CSERV_DISCONNECT) || (reconnect_flag != 1) ) { - reconnect_flag = 0; - } - - if (reason != CSERV_DISCONNECT) - { - ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT; - ar->user_key_ctrl = 0; - } - - netif_stop_queue(ar->arNetDev); - A_MEMZERO(ar->arBssid, sizeof(ar->arBssid)); - ar->arBssChannel = 0; - ar->arBeaconInterval = 0; - - ar6000_TxDataCleanup(ar); -} - -void -ar6000_regDomain_event(struct ar6_softc *ar, u32 regCode) -{ - A_PRINTF("AR6000 Reg Code = 0x%x\n", regCode); - ar->arRegCode = regCode; -} - -void -ar6000_aggr_rcv_addba_req_evt(struct ar6_softc *ar, WMI_ADDBA_REQ_EVENT *evt) -{ - if(evt->status == 0) { - aggr_recv_addba_req_evt(ar->aggr_cntxt, evt->tid, evt->st_seq_no, evt->win_sz); - } -} - -void -ar6000_aggr_rcv_addba_resp_evt(struct ar6_softc *ar, WMI_ADDBA_RESP_EVENT *evt) -{ - A_PRINTF("ADDBA RESP. tid %d status %d, sz %d\n", evt->tid, evt->status, evt->amsdu_sz); - if(evt->status == 0) { - } -} - -void -ar6000_aggr_rcv_delba_req_evt(struct ar6_softc *ar, WMI_DELBA_EVENT *evt) -{ - aggr_recv_delba_req_evt(ar->aggr_cntxt, evt->tid); -} - -void register_pal_cb(ar6k_pal_config_t *palConfig_p) -{ - ar6k_pal_config_g = *palConfig_p; -} - -void -ar6000_hci_event_rcv_evt(struct ar6_softc *ar, WMI_HCI_EVENT *cmd) -{ - void *osbuf = NULL; - s8 i; - u8 size, *buf; - int ret = 0; - - size = cmd->evt_buf_sz + 4; - osbuf = A_NETBUF_ALLOC(size); - if (osbuf == NULL) { - ret = A_NO_MEMORY; - A_PRINTF("Error in allocating netbuf \n"); - return; - } - - A_NETBUF_PUT(osbuf, size); - buf = (u8 *)A_NETBUF_DATA(osbuf); - /* First 2-bytes carry HCI event/ACL data type - * the next 2 are free - */ - *((short *)buf) = WMI_HCI_EVENT_EVENTID; - buf += sizeof(int); - memcpy(buf, cmd->buf, cmd->evt_buf_sz); - - ar6000_deliver_frames_to_nw_stack(ar->arNetDev, osbuf); - if(loghci) { - A_PRINTF_LOG("HCI Event From PAL <-- \n"); - for(i = 0; i < cmd->evt_buf_sz; i++) { - A_PRINTF_LOG("0x%02x ", cmd->buf[i]); - if((i % 10) == 0) { - A_PRINTF_LOG("\n"); - } - } - A_PRINTF_LOG("\n"); - A_PRINTF_LOG("==================================\n"); - } -} - -void -ar6000_neighborReport_event(struct ar6_softc *ar, int numAps, WMI_NEIGHBOR_INFO *info) -{ -#if WIRELESS_EXT >= 18 - struct iw_pmkid_cand *pmkcand; -#else /* WIRELESS_EXT >= 18 */ - static const char *tag = "PRE-AUTH"; - char buf[128]; -#endif /* WIRELESS_EXT >= 18 */ - - union iwreq_data wrqu; - int i; - - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_SCAN,("AR6000 Neighbor Report Event\n")); - for (i=0; i < numAps; info++, i++) { - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_SCAN,("bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ", - info->bssid[0], info->bssid[1], info->bssid[2], - info->bssid[3], info->bssid[4], info->bssid[5])); - if (info->bssFlags & WMI_PREAUTH_CAPABLE_BSS) { - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_SCAN,("preauth-cap")); - } - if (info->bssFlags & WMI_PMKID_VALID_BSS) { - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_SCAN,(" pmkid-valid\n")); - continue; /* we skip bss if the pmkid is already valid */ - } - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_SCAN,("\n")); - A_MEMZERO(&wrqu, sizeof(wrqu)); -#if WIRELESS_EXT >= 18 - pmkcand = A_MALLOC_NOWAIT(sizeof(struct iw_pmkid_cand)); - A_MEMZERO(pmkcand, sizeof(struct iw_pmkid_cand)); - pmkcand->index = i; - pmkcand->flags = info->bssFlags; - memcpy(pmkcand->bssid.sa_data, info->bssid, ATH_MAC_LEN); - wrqu.data.length = sizeof(struct iw_pmkid_cand); - wireless_send_event(ar->arNetDev, IWEVPMKIDCAND, &wrqu, (char *)pmkcand); - kfree(pmkcand); -#else /* WIRELESS_EXT >= 18 */ - snprintf(buf, sizeof(buf), "%s%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x", - tag, - info->bssid[0], info->bssid[1], info->bssid[2], - info->bssid[3], info->bssid[4], info->bssid[5], - i, info->bssFlags); - wrqu.data.length = strlen(buf); - wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf); -#endif /* WIRELESS_EXT >= 18 */ - } -} - -void -ar6000_tkip_micerr_event(struct ar6_softc *ar, u8 keyid, bool ismcast) -{ - static const char *tag = "MLME-MICHAELMICFAILURE.indication"; - char buf[128]; - union iwreq_data wrqu; - - /* - * For AP case, keyid will have aid of STA which sent pkt with - * MIC error. Use this aid to get MAC & send it to hostapd. - */ - if (ar->arNetworkType == AP_NETWORK) { - sta_t *s = ieee80211_find_conn_for_aid(ar, (keyid >> 2)); - if(!s){ - A_PRINTF("AP TKIP MIC error received from Invalid aid / STA not found =%d\n", keyid); - return; - } - A_PRINTF("AP TKIP MIC error received from aid=%d\n", keyid); - snprintf(buf,sizeof(buf), "%s addr=%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x", - tag, s->mac[0],s->mac[1],s->mac[2],s->mac[3],s->mac[4],s->mac[5]); - } else { - - ar6k_cfg80211_tkip_micerr_event(ar, keyid, ismcast); - - A_PRINTF("AR6000 TKIP MIC error received for keyid %d %scast\n", - keyid & 0x3, ismcast ? "multi": "uni"); - snprintf(buf, sizeof(buf), "%s(keyid=%d %sicast)", tag, keyid & 0x3, - ismcast ? "mult" : "un"); - } - - memset(&wrqu, 0, sizeof(wrqu)); - wrqu.data.length = strlen(buf); - wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf); -} - -void -ar6000_scanComplete_event(struct ar6_softc *ar, int status) -{ - - ar6k_cfg80211_scanComplete_event(ar, status); - - if (!ar->arUserBssFilter) { - wmi_bssfilter_cmd(ar->arWmi, NONE_BSS_FILTER, 0); - } - if (ar->scan_triggered) { - if (status== 0) { - union iwreq_data wrqu; - A_MEMZERO(&wrqu, sizeof(wrqu)); - wireless_send_event(ar->arNetDev, SIOCGIWSCAN, &wrqu, NULL); - } - ar->scan_triggered = 0; - } - - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_SCAN,( "AR6000 scan complete: %d\n", status)); -} - -void -ar6000_targetStats_event(struct ar6_softc *ar, u8 *ptr, u32 len) -{ - u8 ac; - - if(ar->arNetworkType == AP_NETWORK) { - WMI_AP_MODE_STAT *p = (WMI_AP_MODE_STAT *)ptr; - WMI_AP_MODE_STAT *ap = &ar->arAPStats; - - if (len < sizeof(*p)) { - return; - } - - for(ac=0;ac<AP_MAX_NUM_STA;ac++) { - ap->sta[ac].tx_bytes += p->sta[ac].tx_bytes; - ap->sta[ac].tx_pkts += p->sta[ac].tx_pkts; - ap->sta[ac].tx_error += p->sta[ac].tx_error; - ap->sta[ac].tx_discard += p->sta[ac].tx_discard; - ap->sta[ac].rx_bytes += p->sta[ac].rx_bytes; - ap->sta[ac].rx_pkts += p->sta[ac].rx_pkts; - ap->sta[ac].rx_error += p->sta[ac].rx_error; - ap->sta[ac].rx_discard += p->sta[ac].rx_discard; - } - - } else { - WMI_TARGET_STATS *pTarget = (WMI_TARGET_STATS *)ptr; - TARGET_STATS *pStats = &ar->arTargetStats; - - if (len < sizeof(*pTarget)) { - return; - } - - // Update the RSSI of the connected bss. - if (ar->arConnected) { - bss_t *pConnBss = NULL; - - pConnBss = wmi_find_node(ar->arWmi,ar->arBssid); - if (pConnBss) - { - pConnBss->ni_rssi = pTarget->cservStats.cs_aveBeacon_rssi; - pConnBss->ni_snr = pTarget->cservStats.cs_aveBeacon_snr; - wmi_node_return(ar->arWmi, pConnBss); - } - } - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("AR6000 updating target stats\n")); - pStats->tx_packets += pTarget->txrxStats.tx_stats.tx_packets; - pStats->tx_bytes += pTarget->txrxStats.tx_stats.tx_bytes; - pStats->tx_unicast_pkts += pTarget->txrxStats.tx_stats.tx_unicast_pkts; - pStats->tx_unicast_bytes += pTarget->txrxStats.tx_stats.tx_unicast_bytes; - pStats->tx_multicast_pkts += pTarget->txrxStats.tx_stats.tx_multicast_pkts; - pStats->tx_multicast_bytes += pTarget->txrxStats.tx_stats.tx_multicast_bytes; - pStats->tx_broadcast_pkts += pTarget->txrxStats.tx_stats.tx_broadcast_pkts; - pStats->tx_broadcast_bytes += pTarget->txrxStats.tx_stats.tx_broadcast_bytes; - pStats->tx_rts_success_cnt += pTarget->txrxStats.tx_stats.tx_rts_success_cnt; - for(ac = 0; ac < WMM_NUM_AC; ac++) - pStats->tx_packet_per_ac[ac] += pTarget->txrxStats.tx_stats.tx_packet_per_ac[ac]; - pStats->tx_errors += pTarget->txrxStats.tx_stats.tx_errors; - pStats->tx_failed_cnt += pTarget->txrxStats.tx_stats.tx_failed_cnt; - pStats->tx_retry_cnt += pTarget->txrxStats.tx_stats.tx_retry_cnt; - pStats->tx_mult_retry_cnt += pTarget->txrxStats.tx_stats.tx_mult_retry_cnt; - pStats->tx_rts_fail_cnt += pTarget->txrxStats.tx_stats.tx_rts_fail_cnt; - pStats->tx_unicast_rate = wmi_get_rate(pTarget->txrxStats.tx_stats.tx_unicast_rate); - - pStats->rx_packets += pTarget->txrxStats.rx_stats.rx_packets; - pStats->rx_bytes += pTarget->txrxStats.rx_stats.rx_bytes; - pStats->rx_unicast_pkts += pTarget->txrxStats.rx_stats.rx_unicast_pkts; - pStats->rx_unicast_bytes += pTarget->txrxStats.rx_stats.rx_unicast_bytes; - pStats->rx_multicast_pkts += pTarget->txrxStats.rx_stats.rx_multicast_pkts; - pStats->rx_multicast_bytes += pTarget->txrxStats.rx_stats.rx_multicast_bytes; - pStats->rx_broadcast_pkts += pTarget->txrxStats.rx_stats.rx_broadcast_pkts; - pStats->rx_broadcast_bytes += pTarget->txrxStats.rx_stats.rx_broadcast_bytes; - pStats->rx_fragment_pkt += pTarget->txrxStats.rx_stats.rx_fragment_pkt; - pStats->rx_errors += pTarget->txrxStats.rx_stats.rx_errors; - pStats->rx_crcerr += pTarget->txrxStats.rx_stats.rx_crcerr; - pStats->rx_key_cache_miss += pTarget->txrxStats.rx_stats.rx_key_cache_miss; - pStats->rx_decrypt_err += pTarget->txrxStats.rx_stats.rx_decrypt_err; - pStats->rx_duplicate_frames += pTarget->txrxStats.rx_stats.rx_duplicate_frames; - pStats->rx_unicast_rate = wmi_get_rate(pTarget->txrxStats.rx_stats.rx_unicast_rate); - - - pStats->tkip_local_mic_failure - += pTarget->txrxStats.tkipCcmpStats.tkip_local_mic_failure; - pStats->tkip_counter_measures_invoked - += pTarget->txrxStats.tkipCcmpStats.tkip_counter_measures_invoked; - pStats->tkip_replays += pTarget->txrxStats.tkipCcmpStats.tkip_replays; - pStats->tkip_format_errors += pTarget->txrxStats.tkipCcmpStats.tkip_format_errors; - pStats->ccmp_format_errors += pTarget->txrxStats.tkipCcmpStats.ccmp_format_errors; - pStats->ccmp_replays += pTarget->txrxStats.tkipCcmpStats.ccmp_replays; - - pStats->power_save_failure_cnt += pTarget->pmStats.power_save_failure_cnt; - pStats->noise_floor_calibation = pTarget->noise_floor_calibation; - - pStats->cs_bmiss_cnt += pTarget->cservStats.cs_bmiss_cnt; - pStats->cs_lowRssi_cnt += pTarget->cservStats.cs_lowRssi_cnt; - pStats->cs_connect_cnt += pTarget->cservStats.cs_connect_cnt; - pStats->cs_disconnect_cnt += pTarget->cservStats.cs_disconnect_cnt; - pStats->cs_aveBeacon_snr = pTarget->cservStats.cs_aveBeacon_snr; - pStats->cs_aveBeacon_rssi = pTarget->cservStats.cs_aveBeacon_rssi; - - if (enablerssicompensation) { - pStats->cs_aveBeacon_rssi = - rssi_compensation_calc(ar, pStats->cs_aveBeacon_rssi); - } - pStats->cs_lastRoam_msec = pTarget->cservStats.cs_lastRoam_msec; - pStats->cs_snr = pTarget->cservStats.cs_snr; - pStats->cs_rssi = pTarget->cservStats.cs_rssi; - - pStats->lq_val = pTarget->lqVal; - - pStats->wow_num_pkts_dropped += pTarget->wowStats.wow_num_pkts_dropped; - pStats->wow_num_host_pkt_wakeups += pTarget->wowStats.wow_num_host_pkt_wakeups; - pStats->wow_num_host_event_wakeups += pTarget->wowStats.wow_num_host_event_wakeups; - pStats->wow_num_events_discarded += pTarget->wowStats.wow_num_events_discarded; - pStats->arp_received += pTarget->arpStats.arp_received; - pStats->arp_matched += pTarget->arpStats.arp_matched; - pStats->arp_replied += pTarget->arpStats.arp_replied; - - if (ar->statsUpdatePending) { - ar->statsUpdatePending = false; - wake_up(&arEvent); - } - } -} - -void -ar6000_rssiThreshold_event(struct ar6_softc *ar, WMI_RSSI_THRESHOLD_VAL newThreshold, s16 rssi) -{ - USER_RSSI_THOLD userRssiThold; - - rssi = rssi + SIGNAL_QUALITY_NOISE_FLOOR; - - if (enablerssicompensation) { - rssi = rssi_compensation_calc(ar, rssi); - } - - /* Send an event to the app */ - userRssiThold.tag = ar->rssi_map[newThreshold].tag; - userRssiThold.rssi = rssi; - A_PRINTF("rssi Threshold range = %d tag = %d rssi = %d\n", newThreshold, - userRssiThold.tag, userRssiThold.rssi); -} - - -void -ar6000_hbChallengeResp_event(struct ar6_softc *ar, u32 cookie, u32 source) -{ - if (source != APP_HB_CHALLENGE) { - /* This would ignore the replys that come in after their due time */ - if (cookie == ar->arHBChallengeResp.seqNum) { - ar->arHBChallengeResp.outstanding = false; - } - } -} - - -void -ar6000_reportError_event(struct ar6_softc *ar, WMI_TARGET_ERROR_VAL errorVal) -{ - static const char * const errString[] = { - [WMI_TARGET_PM_ERR_FAIL] "WMI_TARGET_PM_ERR_FAIL", - [WMI_TARGET_KEY_NOT_FOUND] "WMI_TARGET_KEY_NOT_FOUND", - [WMI_TARGET_DECRYPTION_ERR] "WMI_TARGET_DECRYPTION_ERR", - [WMI_TARGET_BMISS] "WMI_TARGET_BMISS", - [WMI_PSDISABLE_NODE_JOIN] "WMI_PSDISABLE_NODE_JOIN" - }; - - A_PRINTF("AR6000 Error on Target. Error = 0x%x\n", errorVal); - - /* One error is reported at a time, and errorval is a bitmask */ - if(errorVal & (errorVal - 1)) - return; - - A_PRINTF("AR6000 Error type = "); - switch(errorVal) - { - case WMI_TARGET_PM_ERR_FAIL: - case WMI_TARGET_KEY_NOT_FOUND: - case WMI_TARGET_DECRYPTION_ERR: - case WMI_TARGET_BMISS: - case WMI_PSDISABLE_NODE_JOIN: - A_PRINTF("%s\n", errString[errorVal]); - break; - default: - A_PRINTF("INVALID\n"); - break; - } - -} - - -void -ar6000_cac_event(struct ar6_softc *ar, u8 ac, u8 cacIndication, - u8 statusCode, u8 *tspecSuggestion) -{ - WMM_TSPEC_IE *tspecIe; - - /* - * This is the TSPEC IE suggestion from AP. - * Suggestion provided by AP under some error - * cases, could be helpful for the host app. - * Check documentation. - */ - tspecIe = (WMM_TSPEC_IE *)tspecSuggestion; - - /* - * What do we do, if we get TSPEC rejection? One thought - * that comes to mind is implictly delete the pstream... - */ - A_PRINTF("AR6000 CAC notification. " - "AC = %d, cacIndication = 0x%x, statusCode = 0x%x\n", - ac, cacIndication, statusCode); -} - -void -ar6000_channel_change_event(struct ar6_softc *ar, u16 oldChannel, - u16 newChannel) -{ - A_PRINTF("Channel Change notification\nOld Channel: %d, New Channel: %d\n", - oldChannel, newChannel); -} - -#define AR6000_PRINT_BSSID(_pBss) do { \ - A_PRINTF("%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ",\ - (_pBss)[0],(_pBss)[1],(_pBss)[2],(_pBss)[3],\ - (_pBss)[4],(_pBss)[5]); \ -} while(0) - -void -ar6000_roam_tbl_event(struct ar6_softc *ar, WMI_TARGET_ROAM_TBL *pTbl) -{ - u8 i; - - A_PRINTF("ROAM TABLE NO OF ENTRIES is %d ROAM MODE is %d\n", - pTbl->numEntries, pTbl->roamMode); - for (i= 0; i < pTbl->numEntries; i++) { - A_PRINTF("[%d]bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ", i, - pTbl->bssRoamInfo[i].bssid[0], pTbl->bssRoamInfo[i].bssid[1], - pTbl->bssRoamInfo[i].bssid[2], - pTbl->bssRoamInfo[i].bssid[3], - pTbl->bssRoamInfo[i].bssid[4], - pTbl->bssRoamInfo[i].bssid[5]); - A_PRINTF("RSSI %d RSSIDT %d LAST RSSI %d UTIL %d ROAM_UTIL %d" - " BIAS %d\n", - pTbl->bssRoamInfo[i].rssi, - pTbl->bssRoamInfo[i].rssidt, - pTbl->bssRoamInfo[i].last_rssi, - pTbl->bssRoamInfo[i].util, - pTbl->bssRoamInfo[i].roam_util, - pTbl->bssRoamInfo[i].bias); - } -} - -void -ar6000_wow_list_event(struct ar6_softc *ar, u8 num_filters, WMI_GET_WOW_LIST_REPLY *wow_reply) -{ - u8 i,j; - - /*Each event now contains exactly one filter, see bug 26613*/ - A_PRINTF("WOW pattern %d of %d patterns\n", wow_reply->this_filter_num, wow_reply->num_filters); - A_PRINTF("wow mode = %s host mode = %s\n", - (wow_reply->wow_mode == 0? "disabled":"enabled"), - (wow_reply->host_mode == 1 ? "awake":"asleep")); - - - /*If there are no patterns, the reply will only contain generic - WoW information. Pattern information will exist only if there are - patterns present. Bug 26716*/ - - /* If this event contains pattern information, display it*/ - if (wow_reply->this_filter_num) { - i=0; - A_PRINTF("id=%d size=%d offset=%d\n", - wow_reply->wow_filters[i].wow_filter_id, - wow_reply->wow_filters[i].wow_filter_size, - wow_reply->wow_filters[i].wow_filter_offset); - A_PRINTF("wow pattern = "); - for (j=0; j< wow_reply->wow_filters[i].wow_filter_size; j++) { - A_PRINTF("%2.2x",wow_reply->wow_filters[i].wow_filter_pattern[j]); - } - - A_PRINTF("\nwow mask = "); - for (j=0; j< wow_reply->wow_filters[i].wow_filter_size; j++) { - A_PRINTF("%2.2x",wow_reply->wow_filters[i].wow_filter_mask[j]); - } - A_PRINTF("\n"); - } -} - -/* - * Report the Roaming related data collected on the target - */ -void -ar6000_display_roam_time(WMI_TARGET_ROAM_TIME *p) -{ - A_PRINTF("Disconnect Data : BSSID: "); - AR6000_PRINT_BSSID(p->disassoc_bssid); - A_PRINTF(" RSSI %d DISASSOC Time %d NO_TXRX_TIME %d\n", - p->disassoc_bss_rssi,p->disassoc_time, - p->no_txrx_time); - A_PRINTF("Connect Data: BSSID: "); - AR6000_PRINT_BSSID(p->assoc_bssid); - A_PRINTF(" RSSI %d ASSOC Time %d TXRX_TIME %d\n", - p->assoc_bss_rssi,p->assoc_time, - p->allow_txrx_time); -} - -void -ar6000_roam_data_event(struct ar6_softc *ar, WMI_TARGET_ROAM_DATA *p) -{ - switch (p->roamDataType) { - case ROAM_DATA_TIME: - ar6000_display_roam_time(&p->u.roamTime); - break; - default: - break; - } -} - -void -ar6000_bssInfo_event_rx(struct ar6_softc *ar, u8 *datap, int len) -{ - struct sk_buff *skb; - WMI_BSS_INFO_HDR *bih = (WMI_BSS_INFO_HDR *)datap; - - - if (!ar->arMgmtFilter) { - return; - } - if (((ar->arMgmtFilter & IEEE80211_FILTER_TYPE_BEACON) && - (bih->frameType != BEACON_FTYPE)) || - ((ar->arMgmtFilter & IEEE80211_FILTER_TYPE_PROBE_RESP) && - (bih->frameType != PROBERESP_FTYPE))) - { - return; - } - - if ((skb = A_NETBUF_ALLOC_RAW(len)) != NULL) { - - A_NETBUF_PUT(skb, len); - memcpy(A_NETBUF_DATA(skb), datap, len); - skb->dev = ar->arNetDev; - memcpy(skb_mac_header(skb), A_NETBUF_DATA(skb), 6); - skb->ip_summed = CHECKSUM_NONE; - skb->pkt_type = PACKET_OTHERHOST; - skb->protocol = __constant_htons(0x0019); - netif_rx(skb); - } -} - -u32 wmiSendCmdNum; - -int -ar6000_control_tx(void *devt, void *osbuf, HTC_ENDPOINT_ID eid) -{ - struct ar6_softc *ar = (struct ar6_softc *)devt; - int status = 0; - struct ar_cookie *cookie = NULL; - int i; -#ifdef CONFIG_PM - if (ar->arWowState != WLAN_WOW_STATE_NONE) { - A_NETBUF_FREE(osbuf); - return A_EACCES; - } -#endif /* CONFIG_PM */ - /* take lock to protect ar6000_alloc_cookie() */ - AR6000_SPIN_LOCK(&ar->arLock, 0); - - do { - - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_TX,("ar_contrstatus = ol_tx: skb=0x%lx, len=0x%x eid =%d\n", - (unsigned long)osbuf, A_NETBUF_LEN(osbuf), eid)); - - if (ar->arWMIControlEpFull && (eid == ar->arControlEp)) { - /* control endpoint is full, don't allocate resources, we - * are just going to drop this packet */ - cookie = NULL; - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" WMI Control EP full, dropping packet : 0x%lX, len:%d \n", - (unsigned long)osbuf, A_NETBUF_LEN(osbuf))); - } else { - cookie = ar6000_alloc_cookie(ar); - } - - if (cookie == NULL) { - status = A_NO_MEMORY; - break; - } - - if(logWmiRawMsgs) { - A_PRINTF("WMI cmd send, msgNo %d :", wmiSendCmdNum); - for(i = 0; i < a_netbuf_to_len(osbuf); i++) - A_PRINTF("%x ", ((u8 *)a_netbuf_to_data(osbuf))[i]); - A_PRINTF("\n"); - } - - wmiSendCmdNum++; - - } while (false); - - if (cookie != NULL) { - /* got a structure to send it out on */ - ar->arTxPending[eid]++; - - if (eid != ar->arControlEp) { - ar->arTotalTxDataPending++; - } - } - - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - - if (cookie != NULL) { - cookie->arc_bp[0] = (unsigned long)osbuf; - cookie->arc_bp[1] = 0; - SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt, - cookie, - A_NETBUF_DATA(osbuf), - A_NETBUF_LEN(osbuf), - eid, - AR6K_CONTROL_PKT_TAG); - /* this interface is asynchronous, if there is an error, cleanup will happen in the - * TX completion callback */ - HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt); - status = 0; - } - - if (status) { - A_NETBUF_FREE(osbuf); - } - return status; -} - -/* indicate tx activity or inactivity on a WMI stream */ -void ar6000_indicate_tx_activity(void *devt, u8 TrafficClass, bool Active) -{ - struct ar6_softc *ar = (struct ar6_softc *)devt; - HTC_ENDPOINT_ID eid ; - int i; - - if (ar->arWmiEnabled) { - eid = arAc2EndpointID(ar, TrafficClass); - - AR6000_SPIN_LOCK(&ar->arLock, 0); - - ar->arAcStreamActive[TrafficClass] = Active; - - if (Active) { - /* when a stream goes active, keep track of the active stream with the highest priority */ - - if (ar->arAcStreamPriMap[TrafficClass] > ar->arHiAcStreamActivePri) { - /* set the new highest active priority */ - ar->arHiAcStreamActivePri = ar->arAcStreamPriMap[TrafficClass]; - } - - } else { - /* when a stream goes inactive, we may have to search for the next active stream - * that is the highest priority */ - - if (ar->arHiAcStreamActivePri == ar->arAcStreamPriMap[TrafficClass]) { - - /* the highest priority stream just went inactive */ - - /* reset and search for the "next" highest "active" priority stream */ - ar->arHiAcStreamActivePri = 0; - for (i = 0; i < WMM_NUM_AC; i++) { - if (ar->arAcStreamActive[i]) { - if (ar->arAcStreamPriMap[i] > ar->arHiAcStreamActivePri) { - /* set the new highest active priority */ - ar->arHiAcStreamActivePri = ar->arAcStreamPriMap[i]; - } - } - } - } - } - - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - - } else { - /* for mbox ping testing, the traffic class is mapped directly as a stream ID, - * see handling of AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE in ioctl.c - * convert the stream ID to a endpoint */ - eid = arAc2EndpointID(ar, TrafficClass); - } - - /* notify HTC, this may cause credit distribution changes */ - - HTCIndicateActivityChange(ar->arHtcTarget, - eid, - Active); - -} - -void -ar6000_btcoex_config_event(struct ar6_softc *ar, u8 *ptr, u32 len) -{ - - WMI_BTCOEX_CONFIG_EVENT *pBtcoexConfig = (WMI_BTCOEX_CONFIG_EVENT *)ptr; - WMI_BTCOEX_CONFIG_EVENT *pArbtcoexConfig =&ar->arBtcoexConfig; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("AR6000 BTCOEX CONFIG EVENT \n")); - - A_PRINTF("received config event\n"); - pArbtcoexConfig->btProfileType = pBtcoexConfig->btProfileType; - pArbtcoexConfig->linkId = pBtcoexConfig->linkId; - - switch (pBtcoexConfig->btProfileType) { - case WMI_BTCOEX_BT_PROFILE_SCO: - memcpy(&pArbtcoexConfig->info.scoConfigCmd, &pBtcoexConfig->info.scoConfigCmd, - sizeof(WMI_SET_BTCOEX_SCO_CONFIG_CMD)); - break; - case WMI_BTCOEX_BT_PROFILE_A2DP: - memcpy(&pArbtcoexConfig->info.a2dpConfigCmd, &pBtcoexConfig->info.a2dpConfigCmd, - sizeof(WMI_SET_BTCOEX_A2DP_CONFIG_CMD)); - break; - case WMI_BTCOEX_BT_PROFILE_ACLCOEX: - memcpy(&pArbtcoexConfig->info.aclcoexConfig, &pBtcoexConfig->info.aclcoexConfig, - sizeof(WMI_SET_BTCOEX_ACLCOEX_CONFIG_CMD)); - break; - case WMI_BTCOEX_BT_PROFILE_INQUIRY_PAGE: - memcpy(&pArbtcoexConfig->info.btinquiryPageConfigCmd, &pBtcoexConfig->info.btinquiryPageConfigCmd, - sizeof(WMI_SET_BTCOEX_ACLCOEX_CONFIG_CMD)); - break; - } - if (ar->statsUpdatePending) { - ar->statsUpdatePending = false; - wake_up(&arEvent); - } -} - -void -ar6000_btcoex_stats_event(struct ar6_softc *ar, u8 *ptr, u32 len) -{ - WMI_BTCOEX_STATS_EVENT *pBtcoexStats = (WMI_BTCOEX_STATS_EVENT *)ptr; - - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("AR6000 BTCOEX CONFIG EVENT \n")); - - memcpy(&ar->arBtcoexStats, pBtcoexStats, sizeof(WMI_BTCOEX_STATS_EVENT)); - - if (ar->statsUpdatePending) { - ar->statsUpdatePending = false; - wake_up(&arEvent); - } - -} -module_init(ar6000_init_module); -module_exit(ar6000_cleanup_module); - -/* Init cookie queue */ -static void -ar6000_cookie_init(struct ar6_softc *ar) -{ - u32 i; - - ar->arCookieList = NULL; - ar->arCookieCount = 0; - - A_MEMZERO(s_ar_cookie_mem, sizeof(s_ar_cookie_mem)); - - for (i = 0; i < MAX_COOKIE_NUM; i++) { - ar6000_free_cookie(ar, &s_ar_cookie_mem[i]); - } -} - -/* cleanup cookie queue */ -static void -ar6000_cookie_cleanup(struct ar6_softc *ar) -{ - /* It is gone .... */ - ar->arCookieList = NULL; - ar->arCookieCount = 0; -} - -/* Init cookie queue */ -static void -ar6000_free_cookie(struct ar6_softc *ar, struct ar_cookie * cookie) -{ - /* Insert first */ - A_ASSERT(ar != NULL); - A_ASSERT(cookie != NULL); - - cookie->arc_list_next = ar->arCookieList; - ar->arCookieList = cookie; - ar->arCookieCount++; -} - -/* cleanup cookie queue */ -static struct ar_cookie * -ar6000_alloc_cookie(struct ar6_softc *ar) -{ - struct ar_cookie *cookie; - - cookie = ar->arCookieList; - if(cookie != NULL) - { - ar->arCookieList = cookie->arc_list_next; - ar->arCookieCount--; - } - - return cookie; -} - -void -ar6000_tx_retry_err_event(void *devt) -{ - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Tx retries reach maximum!\n")); -} - -void -ar6000_snrThresholdEvent_rx(void *devt, WMI_SNR_THRESHOLD_VAL newThreshold, u8 snr) -{ - WMI_SNR_THRESHOLD_EVENT event; - - event.range = newThreshold; - event.snr = snr; -} - -void -ar6000_lqThresholdEvent_rx(void *devt, WMI_LQ_THRESHOLD_VAL newThreshold, u8 lq) -{ - AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("lq threshold range %d, lq %d\n", newThreshold, lq)); -} - - - -u32 a_copy_to_user(void *to, const void *from, u32 n) -{ - return(copy_to_user(to, from, n)); -} - -u32 a_copy_from_user(void *to, const void *from, u32 n) -{ - return(copy_from_user(to, from, n)); -} - - -int -ar6000_get_driver_cfg(struct net_device *dev, - u16 cfgParam, - void *result) -{ - - int ret = 0; - - switch(cfgParam) - { - case AR6000_DRIVER_CFG_GET_WLANNODECACHING: - *((u32 *)result) = wlanNodeCaching; - break; - case AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS: - *((u32 *)result) = logWmiRawMsgs; - break; - default: - ret = EINVAL; - break; - } - - return ret; -} - -void -ar6000_keepalive_rx(void *devt, u8 configured) -{ - struct ar6_softc *ar = (struct ar6_softc *)devt; - - ar->arKeepaliveConfigured = configured; - wake_up(&arEvent); -} - -void -ar6000_pmkid_list_event(void *devt, u8 numPMKID, WMI_PMKID *pmkidList, - u8 *bssidList) -{ - u8 i, j; - - A_PRINTF("Number of Cached PMKIDs is %d\n", numPMKID); - - for (i = 0; i < numPMKID; i++) { - A_PRINTF("\nBSSID %d ", i); - for (j = 0; j < ATH_MAC_LEN; j++) { - A_PRINTF("%2.2x", bssidList[j]); - } - bssidList += (ATH_MAC_LEN + WMI_PMKID_LEN); - A_PRINTF("\nPMKID %d ", i); - for (j = 0; j < WMI_PMKID_LEN; j++) { - A_PRINTF("%2.2x", pmkidList->pmkid[j]); - } - pmkidList = (WMI_PMKID *)((u8 *)pmkidList + ATH_MAC_LEN + - WMI_PMKID_LEN); - } -} - -void ar6000_pspoll_event(struct ar6_softc *ar,u8 aid) -{ - sta_t *conn=NULL; - bool isPsqEmpty = false; - - conn = ieee80211_find_conn_for_aid(ar, aid); - - /* If the PS q for this STA is not empty, dequeue and send a pkt from - * the head of the q. Also update the More data bit in the WMI_DATA_HDR - * if there are more pkts for this STA in the PS q. If there are no more - * pkts for this STA, update the PVB for this STA. - */ - A_MUTEX_LOCK(&conn->psqLock); - isPsqEmpty = A_NETBUF_QUEUE_EMPTY(&conn->psq); - A_MUTEX_UNLOCK(&conn->psqLock); - - if (isPsqEmpty) { - /* TODO:No buffered pkts for this STA. Send out a NULL data frame */ - } else { - struct sk_buff *skb = NULL; - - A_MUTEX_LOCK(&conn->psqLock); - skb = A_NETBUF_DEQUEUE(&conn->psq); - A_MUTEX_UNLOCK(&conn->psqLock); - /* Set the STA flag to PSPolled, so that the frame will go out */ - STA_SET_PS_POLLED(conn); - ar6000_data_tx(skb, ar->arNetDev); - STA_CLR_PS_POLLED(conn); - - /* Clear the PVB for this STA if the queue has become empty */ - A_MUTEX_LOCK(&conn->psqLock); - isPsqEmpty = A_NETBUF_QUEUE_EMPTY(&conn->psq); - A_MUTEX_UNLOCK(&conn->psqLock); - - if (isPsqEmpty) { - wmi_set_pvb_cmd(ar->arWmi, conn->aid, 0); - } - } -} - -void ar6000_dtimexpiry_event(struct ar6_softc *ar) -{ - bool isMcastQueued = false; - struct sk_buff *skb = NULL; - - /* If there are no associated STAs, ignore the DTIM expiry event. - * There can be potential race conditions where the last associated - * STA may disconnect & before the host could clear the 'Indicate DTIM' - * request to the firmware, the firmware would have just indicated a DTIM - * expiry event. The race is between 'clear DTIM expiry cmd' going - * from the host to the firmware & the DTIM expiry event happening from - * the firmware to the host. - */ - if (ar->sta_list_index == 0) { - return; - } - - A_MUTEX_LOCK(&ar->mcastpsqLock); - isMcastQueued = A_NETBUF_QUEUE_EMPTY(&ar->mcastpsq); - A_MUTEX_UNLOCK(&ar->mcastpsqLock); - - A_ASSERT(isMcastQueued == false); - - /* Flush the mcast psq to the target */ - /* Set the STA flag to DTIMExpired, so that the frame will go out */ - ar->DTIMExpired = true; - - A_MUTEX_LOCK(&ar->mcastpsqLock); - while (!A_NETBUF_QUEUE_EMPTY(&ar->mcastpsq)) { - skb = A_NETBUF_DEQUEUE(&ar->mcastpsq); - A_MUTEX_UNLOCK(&ar->mcastpsqLock); - - ar6000_data_tx(skb, ar->arNetDev); - - A_MUTEX_LOCK(&ar->mcastpsqLock); - } - A_MUTEX_UNLOCK(&ar->mcastpsqLock); - - /* Reset the DTIMExpired flag back to 0 */ - ar->DTIMExpired = false; - - /* Clear the LSB of the BitMapCtl field of the TIM IE */ - wmi_set_pvb_cmd(ar->arWmi, MCAST_AID, 0); -} - -void -read_rssi_compensation_param(struct ar6_softc *ar) -{ - u8 *cust_data_ptr; - -//#define RSSICOMPENSATION_PRINT - -#ifdef RSSICOMPENSATION_PRINT - s16 i; - cust_data_ptr = ar6000_get_cust_data_buffer(ar->arTargetType); - for (i=0; i<16; i++) { - A_PRINTF("cust_data_%d = %x \n", i, *(u8 *)cust_data_ptr); - cust_data_ptr += 1; - } -#endif - - cust_data_ptr = ar6000_get_cust_data_buffer(ar->arTargetType); - - rssi_compensation_param.customerID = *(u16 *)cust_data_ptr & 0xffff; - rssi_compensation_param.enable = *(u16 *)(cust_data_ptr+2) & 0xffff; - rssi_compensation_param.bg_param_a = *(u16 *)(cust_data_ptr+4) & 0xffff; - rssi_compensation_param.bg_param_b = *(u16 *)(cust_data_ptr+6) & 0xffff; - rssi_compensation_param.a_param_a = *(u16 *)(cust_data_ptr+8) & 0xffff; - rssi_compensation_param.a_param_b = *(u16 *)(cust_data_ptr+10) &0xffff; - rssi_compensation_param.reserved = *(u32 *)(cust_data_ptr+12); - -#ifdef RSSICOMPENSATION_PRINT - A_PRINTF("customerID = 0x%x \n", rssi_compensation_param.customerID); - A_PRINTF("enable = 0x%x \n", rssi_compensation_param.enable); - A_PRINTF("bg_param_a = 0x%x and %d \n", rssi_compensation_param.bg_param_a, rssi_compensation_param.bg_param_a); - A_PRINTF("bg_param_b = 0x%x and %d \n", rssi_compensation_param.bg_param_b, rssi_compensation_param.bg_param_b); - A_PRINTF("a_param_a = 0x%x and %d \n", rssi_compensation_param.a_param_a, rssi_compensation_param.a_param_a); - A_PRINTF("a_param_b = 0x%x and %d \n", rssi_compensation_param.a_param_b, rssi_compensation_param.a_param_b); - A_PRINTF("Last 4 bytes = 0x%x \n", rssi_compensation_param.reserved); -#endif - - if (rssi_compensation_param.enable != 0x1) { - rssi_compensation_param.enable = 0; - } - - return; -} - -s32 rssi_compensation_calc_tcmd(u32 freq, s32 rssi, u32 totalPkt) -{ - - if (freq > 5000) - { - if (rssi_compensation_param.enable) - { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, (">>> 11a\n")); - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi before compensation = %d, totalPkt = %d\n", rssi,totalPkt)); - rssi = rssi * rssi_compensation_param.a_param_a + totalPkt * rssi_compensation_param.a_param_b; - rssi = (rssi-50) /100; - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi after compensation = %d\n", rssi)); - } - } - else - { - if (rssi_compensation_param.enable) - { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, (">>> 11bg\n")); - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi before compensation = %d, totalPkt = %d\n", rssi,totalPkt)); - rssi = rssi * rssi_compensation_param.bg_param_a + totalPkt * rssi_compensation_param.bg_param_b; - rssi = (rssi-50) /100; - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi after compensation = %d\n", rssi)); - } - } - - return rssi; -} - -s16 rssi_compensation_calc(struct ar6_softc *ar, s16 rssi) -{ - if (ar->arBssChannel > 5000) - { - if (rssi_compensation_param.enable) - { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, (">>> 11a\n")); - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi before compensation = %d\n", rssi)); - rssi = rssi * rssi_compensation_param.a_param_a + rssi_compensation_param.a_param_b; - rssi = (rssi-50) /100; - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi after compensation = %d\n", rssi)); - } - } - else - { - if (rssi_compensation_param.enable) - { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, (">>> 11bg\n")); - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi before compensation = %d\n", rssi)); - rssi = rssi * rssi_compensation_param.bg_param_a + rssi_compensation_param.bg_param_b; - rssi = (rssi-50) /100; - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi after compensation = %d\n", rssi)); - } - } - - return rssi; -} - -s16 rssi_compensation_reverse_calc(struct ar6_softc *ar, s16 rssi, bool Above) -{ - s16 i; - - if (ar->arBssChannel > 5000) - { - if (rssi_compensation_param.enable) - { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, (">>> 11a\n")); - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi before rev compensation = %d\n", rssi)); - rssi = rssi * 100; - rssi = (rssi - rssi_compensation_param.a_param_b) / rssi_compensation_param.a_param_a; - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi after rev compensation = %d\n", rssi)); - } - } - else - { - if (rssi_compensation_param.enable) - { - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, (">>> 11bg\n")); - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi before rev compensation = %d\n", rssi)); - - if (Above) { - for (i=95; i>=0; i--) { - if (rssi <= rssi_compensation_table[i]) { - rssi = 0 - i; - break; - } - } - } else { - for (i=0; i<=95; i++) { - if (rssi >= rssi_compensation_table[i]) { - rssi = 0 - i; - break; - } - } - } - AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi after rev compensation = %d\n", rssi)); - } - } - - return rssi; -} - -#ifdef WAPI_ENABLE -void ap_wapi_rekey_event(struct ar6_softc *ar, u8 type, u8 *mac) -{ - union iwreq_data wrqu; - char buf[20]; - - A_MEMZERO(buf, sizeof(buf)); - - strcpy(buf, "WAPI_REKEY"); - buf[10] = type; - memcpy(&buf[11], mac, ATH_MAC_LEN); - - A_MEMZERO(&wrqu, sizeof(wrqu)); - wrqu.data.length = 10+1+ATH_MAC_LEN; - wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf); - - A_PRINTF("WAPI REKEY - %d - %02x:%02x\n", type, mac[4], mac[5]); -} -#endif - -static int -ar6000_reinstall_keys(struct ar6_softc *ar, u8 key_op_ctrl) -{ - int status = 0; - struct ieee80211req_key *uik = &ar->user_saved_keys.ucast_ik; - struct ieee80211req_key *bik = &ar->user_saved_keys.bcast_ik; - CRYPTO_TYPE keyType = ar->user_saved_keys.keyType; - - if (IEEE80211_CIPHER_CCKM_KRK != uik->ik_type) { - if (NONE_CRYPT == keyType) { - goto _reinstall_keys_out; - } - - if (uik->ik_keylen) { - status = wmi_addKey_cmd(ar->arWmi, uik->ik_keyix, - ar->user_saved_keys.keyType, PAIRWISE_USAGE, - uik->ik_keylen, (u8 *)&uik->ik_keyrsc, - uik->ik_keydata, key_op_ctrl, uik->ik_macaddr, SYNC_BEFORE_WMIFLAG); - } - - } else { - status = wmi_add_krk_cmd(ar->arWmi, uik->ik_keydata); - } - - if (IEEE80211_CIPHER_CCKM_KRK != bik->ik_type) { - if (NONE_CRYPT == keyType) { - goto _reinstall_keys_out; - } - - if (bik->ik_keylen) { - status = wmi_addKey_cmd(ar->arWmi, bik->ik_keyix, - ar->user_saved_keys.keyType, GROUP_USAGE, - bik->ik_keylen, (u8 *)&bik->ik_keyrsc, - bik->ik_keydata, key_op_ctrl, bik->ik_macaddr, NO_SYNC_WMIFLAG); - } - } else { - status = wmi_add_krk_cmd(ar->arWmi, bik->ik_keydata); - } - -_reinstall_keys_out: - ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT; - ar->user_key_ctrl = 0; - - return status; -} - - -void -ar6000_dset_open_req( - void *context, - u32 id, - u32 targHandle, - u32 targReplyFn, - u32 targReplyArg) -{ -} - -void -ar6000_dset_close( - void *context, - u32 access_cookie) -{ - return; -} - -void -ar6000_dset_data_req( - void *context, - u32 accessCookie, - u32 offset, - u32 length, - u32 targBuf, - u32 targReplyFn, - u32 targReplyArg) -{ -} - -int -ar6000_ap_mode_profile_commit(struct ar6_softc *ar) -{ - WMI_CONNECT_CMD p; - unsigned long flags; - - /* No change in AP's profile configuration */ - if(ar->ap_profile_flag==0) { - A_PRINTF("COMMIT: No change in profile!!!\n"); - return -ENODATA; - } - - if(!ar->arSsidLen) { - A_PRINTF("SSID not set!!!\n"); - return -ECHRNG; - } - - switch(ar->arAuthMode) { - case NONE_AUTH: - if((ar->arPairwiseCrypto != NONE_CRYPT) && -#ifdef WAPI_ENABLE - (ar->arPairwiseCrypto != WAPI_CRYPT) && -#endif - (ar->arPairwiseCrypto != WEP_CRYPT)) { - A_PRINTF("Cipher not supported in AP mode Open auth\n"); - return -EOPNOTSUPP; - } - break; - case WPA_PSK_AUTH: - case WPA2_PSK_AUTH: - case (WPA_PSK_AUTH|WPA2_PSK_AUTH): - break; - default: - A_PRINTF("This key mgmt type not supported in AP mode\n"); - return -EOPNOTSUPP; - } - - /* Update the arNetworkType */ - ar->arNetworkType = ar->arNextMode; - - A_MEMZERO(&p,sizeof(p)); - p.ssidLength = ar->arSsidLen; - memcpy(p.ssid,ar->arSsid,p.ssidLength); - p.channel = ar->arChannelHint; - p.networkType = ar->arNetworkType; - - p.dot11AuthMode = ar->arDot11AuthMode; - p.authMode = ar->arAuthMode; - p.pairwiseCryptoType = ar->arPairwiseCrypto; - p.pairwiseCryptoLen = ar->arPairwiseCryptoLen; - p.groupCryptoType = ar->arGroupCrypto; - p.groupCryptoLen = ar->arGroupCryptoLen; - p.ctrl_flags = ar->arConnectCtrlFlags; - - wmi_ap_profile_commit(ar->arWmi, &p); - spin_lock_irqsave(&ar->arLock, flags); - ar->arConnected = true; - netif_carrier_on(ar->arNetDev); - spin_unlock_irqrestore(&ar->arLock, flags); - ar->ap_profile_flag = 0; - return 0; -} - -int -ar6000_connect_to_ap(struct ar6_softc *ar) -{ - /* The ssid length check prevents second "essid off" from the user, - to be treated as a connect cmd. The second "essid off" is ignored. - */ - if((ar->arWmiReady == true) && (ar->arSsidLen > 0) && ar->arNetworkType!=AP_NETWORK) - { - int status; - if((ADHOC_NETWORK != ar->arNetworkType) && - (NONE_AUTH==ar->arAuthMode) && - (WEP_CRYPT==ar->arPairwiseCrypto)) { - ar6000_install_static_wep_keys(ar); - } - - if (!ar->arUserBssFilter) { - if (wmi_bssfilter_cmd(ar->arWmi, ALL_BSS_FILTER, 0) != 0) { - return -EIO; - } - } -#ifdef WAPI_ENABLE - if (ar->arWapiEnable) { - ar->arPairwiseCrypto = WAPI_CRYPT; - ar->arPairwiseCryptoLen = 0; - ar->arGroupCrypto = WAPI_CRYPT; - ar->arGroupCryptoLen = 0; - ar->arAuthMode = NONE_AUTH; - ar->arConnectCtrlFlags |= CONNECT_IGNORE_WPAx_GROUP_CIPHER; - } -#endif - AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("Connect called with authmode %d dot11 auth %d"\ - " PW crypto %d PW crypto Len %d GRP crypto %d"\ - " GRP crypto Len %d\n", - ar->arAuthMode, ar->arDot11AuthMode, - ar->arPairwiseCrypto, ar->arPairwiseCryptoLen, - ar->arGroupCrypto, ar->arGroupCryptoLen)); - reconnect_flag = 0; - /* Set the listen interval into 1000TUs or more. This value will be indicated to Ap in the conn. - later set it back locally at the STA to 100/1000 TUs depending on the power mode */ - if ((ar->arNetworkType == INFRA_NETWORK)) { - wmi_listeninterval_cmd(ar->arWmi, max(ar->arListenIntervalT, (u16)A_MAX_WOW_LISTEN_INTERVAL), 0); - } - status = wmi_connect_cmd(ar->arWmi, ar->arNetworkType, - ar->arDot11AuthMode, ar->arAuthMode, - ar->arPairwiseCrypto, ar->arPairwiseCryptoLen, - ar->arGroupCrypto,ar->arGroupCryptoLen, - ar->arSsidLen, ar->arSsid, - ar->arReqBssid, ar->arChannelHint, - ar->arConnectCtrlFlags); - if (status) { - wmi_listeninterval_cmd(ar->arWmi, ar->arListenIntervalT, ar->arListenIntervalB); - if (!ar->arUserBssFilter) { - wmi_bssfilter_cmd(ar->arWmi, NONE_BSS_FILTER, 0); - } - return status; - } - - if ((!(ar->arConnectCtrlFlags & CONNECT_DO_WPA_OFFLOAD)) && - ((WPA_PSK_AUTH == ar->arAuthMode) || (WPA2_PSK_AUTH == ar->arAuthMode))) - { - A_TIMEOUT_MS(&ar->disconnect_timer, A_DISCONNECT_TIMER_INTERVAL, 0); - } - - ar->arConnectCtrlFlags &= ~CONNECT_DO_WPA_OFFLOAD; - - ar->arConnectPending = true; - return status; - } - return A_ERROR; -} - -int -ar6000_disconnect(struct ar6_softc *ar) -{ - if ((ar->arConnected == true) || (ar->arConnectPending == true)) { - wmi_disconnect_cmd(ar->arWmi); - /* - * Disconnect cmd is issued, clear connectPending. - * arConnected will be cleard in disconnect_event notification. - */ - ar->arConnectPending = false; - } - - return 0; -} - -int -ar6000_ap_mode_get_wpa_ie(struct ar6_softc *ar, struct ieee80211req_wpaie *wpaie) -{ - sta_t *conn = NULL; - conn = ieee80211_find_conn(ar, wpaie->wpa_macaddr); - - A_MEMZERO(wpaie->wpa_ie, IEEE80211_MAX_IE); - A_MEMZERO(wpaie->rsn_ie, IEEE80211_MAX_IE); - - if(conn) { - memcpy(wpaie->wpa_ie, conn->wpa_ie, IEEE80211_MAX_IE); - } - - return 0; -} - -int -is_iwioctl_allowed(u8 mode, u16 cmd) -{ - if(cmd >= SIOCSIWCOMMIT && cmd <= SIOCGIWPOWER) { - cmd -= SIOCSIWCOMMIT; - if(sioctl_filter[cmd] == 0xFF) return 0; - if(sioctl_filter[cmd] & mode) return 0; - } else if(cmd >= SIOCIWFIRSTPRIV && cmd <= (SIOCIWFIRSTPRIV+30)) { - cmd -= SIOCIWFIRSTPRIV; - if(pioctl_filter[cmd] == 0xFF) return 0; - if(pioctl_filter[cmd] & mode) return 0; - } else { - return A_ERROR; - } - return A_ENOTSUP; -} - -int -is_xioctl_allowed(u8 mode, int cmd) -{ - if(sizeof(xioctl_filter)-1 < cmd) { - A_PRINTF("Filter for this cmd=%d not defined\n",cmd); - return 0; - } - if(xioctl_filter[cmd] == 0xFF) return 0; - if(xioctl_filter[cmd] & mode) return 0; - return A_ERROR; -} - -#ifdef WAPI_ENABLE -int -ap_set_wapi_key(struct ar6_softc *ar, void *ikey) -{ - struct ieee80211req_key *ik = (struct ieee80211req_key *)ikey; - KEY_USAGE keyUsage = 0; - int status; - - if (memcmp(ik->ik_macaddr, bcast_mac, IEEE80211_ADDR_LEN) == 0) { - keyUsage = GROUP_USAGE; - } else { - keyUsage = PAIRWISE_USAGE; - } - A_PRINTF("WAPI_KEY: Type:%d ix:%d mac:%02x:%02x len:%d\n", - keyUsage, ik->ik_keyix, ik->ik_macaddr[4], ik->ik_macaddr[5], - ik->ik_keylen); - - status = wmi_addKey_cmd(ar->arWmi, ik->ik_keyix, WAPI_CRYPT, keyUsage, - ik->ik_keylen, (u8 *)&ik->ik_keyrsc, - ik->ik_keydata, KEY_OP_INIT_VAL, ik->ik_macaddr, - SYNC_BOTH_WMIFLAG); - - if (0 != status) { - return -EIO; - } - return 0; -} -#endif - -void ar6000_peer_event( - void *context, - u8 eventCode, - u8 *macAddr) -{ - u8 pos; - - for (pos=0;pos<6;pos++) - printk("%02x: ",*(macAddr+pos)); - printk("\n"); -} - -#ifdef HTC_TEST_SEND_PKTS -#define HTC_TEST_DUPLICATE 8 -static void DoHTCSendPktsTest(struct ar6_softc *ar, int MapNo, HTC_ENDPOINT_ID eid, struct sk_buff *dupskb) -{ - struct ar_cookie *cookie; - struct ar_cookie *cookieArray[HTC_TEST_DUPLICATE]; - struct sk_buff *new_skb; - int i; - int pkts = 0; - struct htc_packet_queue pktQueue; - EPPING_HEADER *eppingHdr; - - eppingHdr = A_NETBUF_DATA(dupskb); - - if (eppingHdr->Cmd_h == EPPING_CMD_NO_ECHO) { - /* skip test if this is already a tx perf test */ - return; - } - - for (i = 0; i < HTC_TEST_DUPLICATE; i++,pkts++) { - AR6000_SPIN_LOCK(&ar->arLock, 0); - cookie = ar6000_alloc_cookie(ar); - if (cookie != NULL) { - ar->arTxPending[eid]++; - ar->arTotalTxDataPending++; - } - - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - - if (NULL == cookie) { - break; - } - - new_skb = A_NETBUF_ALLOC(A_NETBUF_LEN(dupskb)); - - if (new_skb == NULL) { - AR6000_SPIN_LOCK(&ar->arLock, 0); - ar6000_free_cookie(ar,cookie); - AR6000_SPIN_UNLOCK(&ar->arLock, 0); - break; - } - - A_NETBUF_PUT_DATA(new_skb, A_NETBUF_DATA(dupskb), A_NETBUF_LEN(dupskb)); - cookie->arc_bp[0] = (unsigned long)new_skb; - cookie->arc_bp[1] = MapNo; - SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt, - cookie, - A_NETBUF_DATA(new_skb), - A_NETBUF_LEN(new_skb), - eid, - AR6K_DATA_PKT_TAG); - - cookieArray[i] = cookie; - - { - EPPING_HEADER *pHdr = (EPPING_HEADER *)A_NETBUF_DATA(new_skb); - pHdr->Cmd_h = EPPING_CMD_NO_ECHO; /* do not echo the packet */ - } - } - - if (pkts == 0) { - return; - } - - INIT_HTC_PACKET_QUEUE(&pktQueue); - - for (i = 0; i < pkts; i++) { - HTC_PACKET_ENQUEUE(&pktQueue,&cookieArray[i]->HtcPkt); - } - - HTCSendPktsMultiple(ar->arHtcTarget, &pktQueue); - -} -#endif - -#ifdef CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT -/* - * Add support for adding and removing a virtual adapter for soft AP. - * Some OS requires different adapters names for station and soft AP mode. - * To support these requirement, create and destroy a netdevice instance - * when the AP mode is operational. A full fledged support for virual device - * is not implemented. Rather a virtual interface is created and is linked - * with the existing physical device instance during the operation of the - * AP mode. - */ - -int ar6000_start_ap_interface(struct ar6_softc *ar) -{ - struct ar_virtual_interface *arApDev; - - /* Change net_device to point to AP instance */ - arApDev = (struct ar_virtual_interface *)ar->arApDev; - ar->arNetDev = arApDev->arNetDev; - - return 0; -} - -int ar6000_stop_ap_interface(struct ar6_softc *ar) -{ - struct ar_virtual_interface *arApDev; - - /* Change net_device to point to sta instance */ - arApDev = (struct ar_virtual_interface *)ar->arApDev; - if (arApDev) { - ar->arNetDev = arApDev->arStaNetDev; - } - - return 0; -} - - -int ar6000_create_ap_interface(struct ar6_softc *ar, char *ap_ifname) -{ - struct net_device *dev; - struct ar_virtual_interface *arApDev; - - dev = alloc_etherdev(sizeof(struct ar_virtual_interface)); - if (dev == NULL) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_create_ap_interface: can't alloc etherdev\n")); - return A_ERROR; - } - - ether_setup(dev); - init_netdev(dev, ap_ifname); - dev->priv_flags &= ~IFF_TX_SKB_SHARING; - - if (register_netdev(dev)) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_create_ap_interface: register_netdev failed\n")); - return A_ERROR; - } - - arApDev = netdev_priv(dev); - arApDev->arDev = ar; - arApDev->arNetDev = dev; - arApDev->arStaNetDev = ar->arNetDev; - - ar->arApDev = arApDev; - arApNetDev = dev; - - /* Copy the MAC address */ - memcpy(dev->dev_addr, ar->arNetDev->dev_addr, AR6000_ETH_ADDR_LEN); - - return 0; -} - -int ar6000_add_ap_interface(struct ar6_softc *ar, char *ap_ifname) -{ - /* Interface already added, need not proceed further */ - if (ar->arApDev != NULL) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_add_ap_interface: interface already present \n")); - return 0; - } - - if (ar6000_create_ap_interface(ar, ap_ifname) != 0) { - return A_ERROR; - } - - A_PRINTF("Add AP interface %s \n",ap_ifname); - - return ar6000_start_ap_interface(ar); -} - -int ar6000_remove_ap_interface(struct ar6_softc *ar) -{ - if (arApNetDev) { - ar6000_stop_ap_interface(ar); - - unregister_netdev(arApNetDev); - free_netdev(apApNetDev); - - A_PRINTF("Remove AP interface\n"); - } - ar->arApDev = NULL; - arApNetDev = NULL; - - - return 0; -} -#endif /* CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT */ - - -#ifdef EXPORT_HCI_BRIDGE_INTERFACE -EXPORT_SYMBOL(setupbtdev); -#endif |