summaryrefslogtreecommitdiff
path: root/drivers/staging/rt2860/common
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/staging/rt2860/common')
-rw-r--r--drivers/staging/rt2860/common/cmm_data.c4
-rw-r--r--drivers/staging/rt2860/common/cmm_data_2860.c144
-rw-r--r--drivers/staging/rt2860/common/cmm_sync.c2
-rw-r--r--drivers/staging/rt2860/common/cmm_wpa.c40
-rw-r--r--drivers/staging/rt2860/common/mlme.c238
-rw-r--r--drivers/staging/rt2860/common/rtmp_init.c128
6 files changed, 492 insertions, 64 deletions
diff --git a/drivers/staging/rt2860/common/cmm_data.c b/drivers/staging/rt2860/common/cmm_data.c
index b67b9eba7229..14a99b3e3211 100644
--- a/drivers/staging/rt2860/common/cmm_data.c
+++ b/drivers/staging/rt2860/common/cmm_data.c
@@ -366,7 +366,7 @@ NDIS_STATUS MlmeHardTransmitTxRing(
{
// outgoing frame always wakeup PHY to prevent frame lost
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
- AsicForceWakeup(pAd, TRUE);
+ AsicForceWakeup(pAd, FROM_TX);
}
#endif // CONFIG_STA_SUPPORT //
pFirstTxWI =(PTXWI_STRUC)pSrcBufVA;
@@ -541,7 +541,7 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
{
// outgoing frame always wakeup PHY to prevent frame lost
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
- AsicForceWakeup(pAd, TRUE);
+ AsicForceWakeup(pAd, FROM_TX);
}
#endif // CONFIG_STA_SUPPORT //
diff --git a/drivers/staging/rt2860/common/cmm_data_2860.c b/drivers/staging/rt2860/common/cmm_data_2860.c
index 419e50c3fc4c..fae741e4beeb 100644
--- a/drivers/staging/rt2860/common/cmm_data_2860.c
+++ b/drivers/staging/rt2860/common/cmm_data_2860.c
@@ -634,7 +634,7 @@ VOID RT28xxPciAsicRadioOff(
}
// Once go into this function, disable tx because don't want too many packets in queue to prevent HW stops.
- pAd->bPCIclkOffDisableTx = TRUE;
+ RTMP_SET_PSFLAG(pAd, fRTMP_PS_DISABLE_TX);
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
{
@@ -651,7 +651,7 @@ VOID RT28xxPciAsicRadioOff(
{
DBGPRINT(RT_DEBUG_TRACE, ("TbTTTime = 0x%x , give up this sleep. \n", TbTTTime));
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
- pAd->bPCIclkOffDisableTx = FALSE;
+ RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_DISABLE_TX);
return;
}
else
@@ -688,18 +688,25 @@ VOID RT28xxPciAsicRadioOff(
if (i >= 50)
{
DBGPRINT(RT_DEBUG_TRACE, ("DMA keeps busy. return on RT28xxPciAsicRadioOff ()\n"));
- pAd->bPCIclkOffDisableTx = FALSE;
RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word);
DmaCfg.field.EnableTxDMA = 1;
RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, DmaCfg.word);
+ pAd->CheckDmaBusyCount++;
return;
}
+ else
+ {
+ pAd->CheckDmaBusyCount = 0;
+ }
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF);
// Set to 1R.
- tempBBP_R3 = (pAd->StaCfg.BBPR3 & 0xE7);
- RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, tempBBP_R3);
+ if (pAd->Antenna.field.RxPath > 1)
+ {
+ tempBBP_R3 = (pAd->StaCfg.BBPR3 & 0xE7);
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, tempBBP_R3);
+ }
// In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again.
if (INFRA_ON(pAd) && (pAd->CommonCfg.CentralChannel != pAd->CommonCfg.Channel)
@@ -714,8 +721,15 @@ VOID RT28xxPciAsicRadioOff(
AsicTurnOffRFClk(pAd, pAd->CommonCfg.Channel);
}
- // When PCI clock is off, don't want to service interrupt.
- RTMP_IO_WRITE32(pAd, INT_MASK_CSR, AutoWakeupInt);
+ if (Level != RTMP_HALT)
+ {
+ // Change Interrupt bitmask.
+ RTMP_IO_WRITE32(pAd, INT_MASK_CSR, AutoWakeupInt);
+ }
+ else
+ {
+ NICDisableInterrupt(pAd);
+ }
RTMP_IO_WRITE32(pAd, RX_CRX_IDX, pAd->RxRing.RxCpuIdx);
// Disable MAC Rx
@@ -726,7 +740,8 @@ VOID RT28xxPciAsicRadioOff(
// 2. Send Sleep command
RTMP_IO_WRITE32(pAd, H2M_MAILBOX_STATUS, 0xffffffff);
RTMP_IO_WRITE32(pAd, H2M_MAILBOX_CID, 0xffffffff);
- AsicSendCommandToMcu(pAd, 0x30, PowerSafeCID, 0xff, 0x00); // send POWER-SAVE command to MCU. Timeout unit:40us.
+ // send POWER-SAVE command to MCU. high-byte = 1 save power as much as possible. high byte = 0 save less power
+ AsicSendCommandToMcu(pAd, 0x30, PowerSafeCID, 0xff, 0x1);
// 2-1. Wait command success
// Status = 1 : success, Status = 2, already sleep, Status = 3, Maybe MAC is busy so can't finish this task.
brc = AsicCheckCommanOk(pAd, PowerSafeCID);
@@ -734,7 +749,7 @@ VOID RT28xxPciAsicRadioOff(
if (brc == FALSE)
{
// try again
- AsicSendCommandToMcu(pAd, 0x30, PowerSafeCID, 0xff, 0x00); // send POWER-SAVE command to MCU. Timeout unit:40us.
+ AsicSendCommandToMcu(pAd, 0x30, PowerSafeCID, 0xff, 0x01); // send POWER-SAVE command to MCU. Timeout unit:40us.
//RTMPusecDelay(200);
brc = AsicCheckCommanOk(pAd, PowerSafeCID);
}
@@ -759,7 +774,7 @@ VOID RT28xxPciAsicRadioOff(
do
{
RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word);
- if (DmaCfg.field.RxDMABusy == 0)
+ if ((DmaCfg.field.RxDMABusy == 0) && (DmaCfg.field.TxDMABusy == 0))
break;
RTMPusecDelay(20);
i++;
@@ -767,13 +782,12 @@ VOID RT28xxPciAsicRadioOff(
if (i >= 50)
{
+ pAd->CheckDmaBusyCount++;
DBGPRINT(RT_DEBUG_TRACE, ("DMA Rx keeps busy. on RT28xxPciAsicRadioOff ()\n"));
}
- // disable DMA Rx.
+ else
{
- RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word);
- DmaCfg.field.EnableRxDMA = 0;
- RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, DmaCfg.word);
+ pAd->CheckDmaBusyCount = 0;
}
if (Level == DOT11POWERSAVE)
@@ -799,7 +813,7 @@ VOID RT28xxPciAsicRadioOff(
if (Level == RTMP_HALT)
{
if ((brc == TRUE) && (i < 50))
- RTMPPCIeLinkCtrlSetting(pAd, 1);
+ RTMPPCIeLinkCtrlSetting(pAd, 0);
}
// 4. Set PCI configuration Space Link Comtrol fields. Only Radio Off needs to call this function
else
@@ -808,7 +822,7 @@ VOID RT28xxPciAsicRadioOff(
RTMPPCIeLinkCtrlSetting(pAd, 3);
}
- pAd->bPCIclkOffDisableTx = FALSE;
+ RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_DISABLE_TX);
}
@@ -835,7 +849,8 @@ BOOLEAN RT28xxPciAsicRadioOn(
{
pAd->Mlme.bPsPollTimerRunning = FALSE;
RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled);
- if ((Level == GUIRADIO_OFF) || (Level == GUI_IDLE_POWER_SAVE))
+ if ((Level == GUIRADIO_OFF) || (Level == GUI_IDLE_POWER_SAVE)
+ || (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND)))
{
DBGPRINT(RT_DEBUG_TRACE, ("RT28xxPciAsicRadioOn ()\n"));
// 1. Set PCI Link Control in Configuration Space.
@@ -845,15 +860,14 @@ BOOLEAN RT28xxPciAsicRadioOn(
}
pAd->bPCIclkOff = FALSE;
-
+ RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x3a80);
// 2. Send wake up command.
- AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00, 0x00);
+ AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00, 0x02);
// 2-1. wait command ok.
brv = AsicCheckCommanOk(pAd, PowerWakeCID);
if (brv)
{
- //RTMP_IO_WRITE32(pAd, INT_MASK_CSR, (DELAYINTMASK|RxINT));
NICEnableInterrupt(pAd);
// 3. Enable Tx DMA.
@@ -893,13 +907,10 @@ BOOLEAN RT28xxPciAsicRadioOn(
VOID RT28xxPciStaAsicForceWakeup(
IN PRTMP_ADAPTER pAd,
- IN BOOLEAN bFromTx)
+ IN UCHAR Level)
{
AUTO_WAKEUP_STRUC AutoWakeupCfg;
- if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
- return;
-
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WAKEUP_NOW))
{
DBGPRINT(RT_DEBUG_TRACE, ("waking up now!\n"));
@@ -907,38 +918,48 @@ VOID RT28xxPciStaAsicForceWakeup(
}
OPSTATUS_SET_FLAG(pAd, fOP_STATUS_WAKEUP_NOW);
+ RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW);
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
{
// Support PCIe Advance Power Save
- if (bFromTx == TRUE)
+ if (((Level == FROM_TX) && (pAd->Mlme.bPsPollTimerRunning == TRUE)) ||
+ (Level == RTMP_HALT))
{
pAd->Mlme.bPsPollTimerRunning = FALSE;
RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_WAKEUP);
- RTMPusecDelay(3000);
+ RTMPusecDelay(5000);
DBGPRINT(RT_DEBUG_TRACE, ("=======AsicForceWakeup===bFromTx\n"));
}
AutoWakeupCfg.word = 0;
RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
- if (RT28xxPciAsicRadioOn(pAd, DOT11POWERSAVE))
- {
- // In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again.
- if (INFRA_ON(pAd) && (pAd->CommonCfg.CentralChannel != pAd->CommonCfg.Channel)
- && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40))
- {
- // Must using 40MHz.
- AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
- AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
- }
- else
- {
- // Must using 20MHz.
- AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
- AsicLockChannel(pAd, pAd->CommonCfg.Channel);
- }
- }
+ // If this is called from Halt. ALWAYS force wakeup!!!
+ if (Level == RTMP_HALT)
+ {
+ RT28xxPciAsicRadioOn(pAd, RTMP_HALT);
+ }
+ else
+ {
+ if (RT28xxPciAsicRadioOn(pAd, DOT11POWERSAVE))
+ {
+ // In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again.
+ if (INFRA_ON(pAd) && (pAd->CommonCfg.CentralChannel != pAd->CommonCfg.Channel)
+ && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40))
+ {
+ // Must using 40MHz.
+ AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
+ AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
+ }
+ else
+ {
+ // Must using 20MHz.
+ AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
+ AsicLockChannel(pAd, pAd->CommonCfg.Channel);
+ }
+ }
+ }
}
else
{
@@ -1122,6 +1143,7 @@ VOID RT28xxPciMlmeRadioOn(
{
NICResetFromError(pAd);
+ /*
RTMPRingCleanUp(pAd, QID_AC_BK);
RTMPRingCleanUp(pAd, QID_AC_BE);
RTMPRingCleanUp(pAd, QID_AC_VI);
@@ -1129,6 +1151,7 @@ VOID RT28xxPciMlmeRadioOn(
RTMPRingCleanUp(pAd, QID_HCCA);
RTMPRingCleanUp(pAd, QID_MGMT);
RTMPRingCleanUp(pAd, QID_RX);
+ */
// Enable Tx/Rx
RTMPEnableRxTx(pAd);
@@ -1162,6 +1185,12 @@ VOID RT28xxPciMlmeRadioOFF(
WPDMA_GLO_CFG_STRUC GloCfg;
UINT32 i;
+ if (pAd->StaCfg.bRadio == TRUE)
+ {
+ DBGPRINT(RT_DEBUG_TRACE,("-->MlmeRadioOff() return on bRadio == TRUE; \n"));
+ return;
+ }
+
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))
return;
@@ -1169,13 +1198,12 @@ VOID RT28xxPciMlmeRadioOFF(
// Set LED
RTMPSetLED(pAd, LED_RADIO_OFF);
- // Set Radio off flag
- RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
BOOLEAN Cancelled;
+
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
{
RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &Cancelled);
@@ -1185,6 +1213,15 @@ VOID RT28xxPciMlmeRadioOFF(
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
{
BOOLEAN Cancelled;
+
+ // Always radio on since the NIC needs to set the MCU command (LED_RADIO_OFF).
+ if ((pAd->OpMode == OPMODE_STA) &&
+ (IDLE_ON(pAd)) &&
+ (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF)))
+ {
+ RT28xxPciAsicRadioOn(pAd, GUI_IDLE_POWER_SAVE);
+ }
+
pAd->Mlme.bPsPollTimerRunning = FALSE;
RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled);
RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer, &Cancelled);
@@ -1197,9 +1234,26 @@ VOID RT28xxPciMlmeRadioOFF(
//==========================================
// Clean up old bss table
BssTableInit(&pAd->ScanTab);
+
+ RTMPRingCleanUp(pAd, QID_AC_BK);
+ RTMPRingCleanUp(pAd, QID_AC_BE);
+ RTMPRingCleanUp(pAd, QID_AC_VI);
+ RTMPRingCleanUp(pAd, QID_AC_VO);
+ RTMPRingCleanUp(pAd, QID_HCCA);
+ RTMPRingCleanUp(pAd, QID_MGMT);
+ RTMPRingCleanUp(pAd, QID_RX);
+
+ if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
+ {
+ RTMPSetTimer(&pAd->Mlme.RadioOnOffTimer, 500);
+ return;
+ }
}
#endif // CONFIG_STA_SUPPORT //
+ // Set Radio off flag
+ RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
+
// Disable Tx/Rx DMA
RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &GloCfg.word); // disable DMA
GloCfg.field.EnableTxDMA = 0;
diff --git a/drivers/staging/rt2860/common/cmm_sync.c b/drivers/staging/rt2860/common/cmm_sync.c
index 40e4109118e0..d29e0b630e2e 100644
--- a/drivers/staging/rt2860/common/cmm_sync.c
+++ b/drivers/staging/rt2860/common/cmm_sync.c
@@ -470,7 +470,7 @@ VOID ScanNextChannel(
{
// BBP and RF are not accessible in PS mode, we has to wake them up first
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
- AsicForceWakeup(pAd, TRUE);
+ AsicForceWakeup(pAd, FROM_TX);
// leave PSM during scanning. otherwise we may lost ProbeRsp & BEACON
if (pAd->StaCfg.Psm == PWR_SAVE)
diff --git a/drivers/staging/rt2860/common/cmm_wpa.c b/drivers/staging/rt2860/common/cmm_wpa.c
index 81c332ac2524..69baf522fa01 100644
--- a/drivers/staging/rt2860/common/cmm_wpa.c
+++ b/drivers/staging/rt2860/common/cmm_wpa.c
@@ -39,8 +39,10 @@
// WPA OUI
UCHAR OUI_WPA_NONE_AKM[4] = {0x00, 0x50, 0xF2, 0x00};
UCHAR OUI_WPA_VERSION[4] = {0x00, 0x50, 0xF2, 0x01};
+UCHAR OUI_WPA_WEP40[4] = {0x00, 0x50, 0xF2, 0x01};
UCHAR OUI_WPA_TKIP[4] = {0x00, 0x50, 0xF2, 0x02};
UCHAR OUI_WPA_CCMP[4] = {0x00, 0x50, 0xF2, 0x04};
+UCHAR OUI_WPA_WEP104[4] = {0x00, 0x50, 0xF2, 0x05};
UCHAR OUI_WPA_8021X_AKM[4] = {0x00, 0x50, 0xF2, 0x01};
UCHAR OUI_WPA_PSK_AKM[4] = {0x00, 0x50, 0xF2, 0x02};
// WPA2 OUI
@@ -49,6 +51,7 @@ UCHAR OUI_WPA2_TKIP[4] = {0x00, 0x0F, 0xAC, 0x02};
UCHAR OUI_WPA2_CCMP[4] = {0x00, 0x0F, 0xAC, 0x04};
UCHAR OUI_WPA2_8021X_AKM[4] = {0x00, 0x0F, 0xAC, 0x01};
UCHAR OUI_WPA2_PSK_AKM[4] = {0x00, 0x0F, 0xAC, 0x02};
+UCHAR OUI_WPA2_WEP104[4] = {0x00, 0x0F, 0xAC, 0x05};
// MSA OUI
UCHAR OUI_MSA_8021X_AKM[4] = {0x00, 0x0F, 0xAC, 0x05}; // Not yet final - IEEE 802.11s-D1.06
UCHAR OUI_MSA_PSK_AKM[4] = {0x00, 0x0F, 0xAC, 0x06}; // Not yet final - IEEE 802.11s-D1.06
@@ -367,6 +370,24 @@ static VOID RTMPInsertRsnIeCipher(
break;
}
+#ifdef CONFIG_STA_SUPPORT
+ if ((pAd->OpMode == OPMODE_STA) &&
+ (pAd->StaCfg.GroupCipher != Ndis802_11Encryption2Enabled) &&
+ (pAd->StaCfg.GroupCipher != Ndis802_11Encryption3Enabled))
+ {
+ UINT GroupCipher = pAd->StaCfg.GroupCipher;
+ switch(GroupCipher)
+ {
+ case Ndis802_11GroupWEP40Enabled:
+ NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA2_WEP40, 4);
+ break;
+ case Ndis802_11GroupWEP104Enabled:
+ NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA2_WEP104, 4);
+ break;
+ }
+ }
+#endif // CONFIG_STA_SUPPORT //
+
// swap for big-endian platform
pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version);
pRsnie_cipher->ucount = cpu2le16(pRsnie_cipher->ucount);
@@ -427,11 +448,28 @@ static VOID RTMPInsertRsnIeCipher(
break;
}
+#ifdef CONFIG_STA_SUPPORT
+ if ((pAd->OpMode == OPMODE_STA) &&
+ (pAd->StaCfg.GroupCipher != Ndis802_11Encryption2Enabled) &&
+ (pAd->StaCfg.GroupCipher != Ndis802_11Encryption3Enabled))
+ {
+ UINT GroupCipher = pAd->StaCfg.GroupCipher;
+ switch(GroupCipher)
+ {
+ case Ndis802_11GroupWEP40Enabled:
+ NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA_WEP40, 4);
+ break;
+ case Ndis802_11GroupWEP104Enabled:
+ NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA_WEP104, 4);
+ break;
+ }
+ }
+#endif // CONFIG_STA_SUPPORT //
+
// swap for big-endian platform
pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version);
pRsnie_cipher->ucount = cpu2le16(pRsnie_cipher->ucount);
}
-
}
/*
diff --git a/drivers/staging/rt2860/common/mlme.c b/drivers/staging/rt2860/common/mlme.c
index 229747095aec..75f810ca9ae2 100644
--- a/drivers/staging/rt2860/common/mlme.c
+++ b/drivers/staging/rt2860/common/mlme.c
@@ -808,21 +808,35 @@ VOID MlmePeriodicExec(
ULONG TxTotalCnt;
PRTMP_ADAPTER pAd = (RTMP_ADAPTER *)FunctionContext;
+ //Baron 2008/07/10
+ //printk("Baron_Test:\t%s", RTMPGetRalinkEncryModeStr(pAd->StaCfg.WepStatus));
+ //If the STA security setting is OPEN or WEP, pAd->StaCfg.WpaSupplicantUP = 0.
+ //If the STA security setting is WPAPSK or WPA2PSK, pAd->StaCfg.WpaSupplicantUP = 1.
+ if(pAd->StaCfg.WepStatus<2)
+ {
+ pAd->StaCfg.WpaSupplicantUP = 0;
+ }
+ else
+ {
+ pAd->StaCfg.WpaSupplicantUP = 1;
+ }
+
#ifdef CONFIG_STA_SUPPORT
#ifdef RT2860
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
// If Hardware controlled Radio enabled, we have to check GPIO pin2 every 2 second.
// Move code to here, because following code will return when radio is off
- if ((pAd->Mlme.PeriodicRound % (MLME_TASK_EXEC_MULTIPLE * 2) == 0) && (pAd->StaCfg.bHardwareRadio == TRUE) &&
+ if ((pAd->Mlme.PeriodicRound % (MLME_TASK_EXEC_MULTIPLE * 2) == 0) &&
+ (pAd->StaCfg.bHardwareRadio == TRUE) &&
+ (RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP)) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) &&
- (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) &&
- (pAd->bPCIclkOff == FALSE))
+ (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)))
{
UINT32 data = 0;
// Read GPIO pin2 as Hardware controlled radio state
- RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &data);
+ RTMP_IO_FORCE_READ32(pAd, GPIO_CTRL_CFG, &data);
if (data & 0x04)
{
pAd->StaCfg.bHwRadio = TRUE;
@@ -860,6 +874,45 @@ VOID MlmePeriodicExec(
fRTMP_ADAPTER_RESET_IN_PROGRESS))))
return;
+ IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+ {
+ if ((pAd->RalinkCounters.LastReceivedByteCount == pAd->RalinkCounters.ReceivedByteCount) && (pAd->StaCfg.bRadio == TRUE))
+ {
+ // If ReceiveByteCount doesn't change, increase SameRxByteCount by 1.
+ pAd->SameRxByteCount++;
+ }
+ else
+ pAd->SameRxByteCount = 0;
+
+ // If after BBP, still not work...need to check to reset PBF&MAC.
+ if (pAd->SameRxByteCount == 702)
+ {
+ pAd->SameRxByteCount = 0;
+ AsicResetPBF(pAd);
+ AsicResetMAC(pAd);
+ }
+
+ // If SameRxByteCount keeps happens for 2 second in infra mode, or for 60 seconds in idle mode.
+ if (((INFRA_ON(pAd)) && (pAd->SameRxByteCount > 20)) || ((IDLE_ON(pAd)) && (pAd->SameRxByteCount > 600)))
+ {
+ if ((pAd->StaCfg.bRadio == TRUE) && (pAd->SameRxByteCount < 700))
+ {
+ DBGPRINT(RT_DEBUG_TRACE, ("---> SameRxByteCount = %d !!!!!!!!!!!!!!! \n", pAd->SameRxByteCount));
+ pAd->SameRxByteCount = 700;
+ AsicResetBBP(pAd);
+ }
+ }
+
+ // Update lastReceiveByteCount.
+ pAd->RalinkCounters.LastReceivedByteCount = pAd->RalinkCounters.ReceivedByteCount;
+
+ if ((pAd->CheckDmaBusyCount > 3) && (IDLE_ON(pAd)))
+ {
+ pAd->CheckDmaBusyCount = 0;
+ AsicResetFromDMABusy(pAd);
+ }
+ }
+
RT28XX_MLME_PRE_SANITY_CHECK(pAd);
#ifdef RALINK_ATE
@@ -1081,6 +1134,19 @@ VOID STAMlmePeriodicExec(
pAd->StaCfg.bBlockAssoc = FALSE;
}
+ //Baron 2008/07/10
+ //printk("Baron_Test:\t%s", RTMPGetRalinkEncryModeStr(pAd->StaCfg.WepStatus));
+ //If the STA security setting is OPEN or WEP, pAd->StaCfg.WpaSupplicantUP = 0.
+ //If the STA security setting is WPAPSK or WPA2PSK, pAd->StaCfg.WpaSupplicantUP = 1.
+ if(pAd->StaCfg.WepStatus<2)
+ {
+ pAd->StaCfg.WpaSupplicantUP = 0;
+ }
+ else
+ {
+ pAd->StaCfg.WpaSupplicantUP = 1;
+ }
+
if ((pAd->PreMediaState != pAd->IndicateMediaState) && (pAd->CommonCfg.bWirelessEvent))
{
if (pAd->IndicateMediaState == NdisMediaStateConnected)
@@ -1090,6 +1156,15 @@ VOID STAMlmePeriodicExec(
pAd->PreMediaState = pAd->IndicateMediaState;
}
+ if ((pAd->OpMode == OPMODE_STA) && (IDLE_ON(pAd)) &&
+ (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) &&
+ (pAd->Mlme.SyncMachine.CurrState == SYNC_IDLE) &&
+ (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) &&
+ (RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP)) &&
+ (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF)))
+ {
+ RT28xxPciAsicRadioOff(pAd, GUI_IDLE_POWER_SAVE, 0);
+ }
@@ -2781,7 +2856,7 @@ VOID MlmeCheckPsmChange(
if (INFRA_ON(pAd) &&
(PowerMode != Ndis802_11PowerModeCAM) &&
(pAd->StaCfg.Psm == PWR_ACTIVE) &&
- (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE))
+ RTMP_TEST_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP))
{
NdisGetSystemUpTime(&pAd->Mlme.LastSendNULLpsmTime);
pAd->RalinkCounters.RxCountSinceLastNULL = 0;
@@ -4065,7 +4140,9 @@ VOID BssTableSsidSort(
continue;
// check group cipher
- if (pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher)
+ if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) &&
+ (pInBss->WPA.GroupCipher != Ndis802_11GroupWEP40Enabled) &&
+ (pInBss->WPA.GroupCipher != Ndis802_11GroupWEP104Enabled))
continue;
// check pairwise cipher, skip if none matched
@@ -4084,7 +4161,9 @@ VOID BssTableSsidSort(
continue;
// check group cipher
- if (pAd->StaCfg.WepStatus < pInBss->WPA2.GroupCipher)
+ if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) &&
+ (pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP40Enabled) &&
+ (pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP104Enabled))
continue;
// check pairwise cipher, skip if none matched
@@ -4371,8 +4450,10 @@ VOID BssCipherParse(
switch (*pTmp)
{
case 1:
- case 5: // Although WEP is not allowed in WPA related auth mode, we parse it anyway
- pBss->WPA.GroupCipher = Ndis802_11Encryption1Enabled;
+ pBss->WPA.GroupCipher = Ndis802_11GroupWEP40Enabled;
+ break;
+ case 5:
+ pBss->WPA.GroupCipher = Ndis802_11GroupWEP104Enabled;
break;
case 2:
pBss->WPA.GroupCipher = Ndis802_11Encryption2Enabled;
@@ -4489,8 +4570,10 @@ VOID BssCipherParse(
switch (pCipher->Type)
{
case 1:
- case 5: // Although WEP is not allowed in WPA related auth mode, we parse it anyway
- pBss->WPA2.GroupCipher = Ndis802_11Encryption1Enabled;
+ pBss->WPA2.GroupCipher = Ndis802_11GroupWEP40Enabled;
+ break;
+ case 5:
+ pBss->WPA2.GroupCipher = Ndis802_11GroupWEP104Enabled;
break;
case 2:
pBss->WPA2.GroupCipher = Ndis802_11Encryption2Enabled;
@@ -6149,6 +6232,12 @@ VOID AsicAdjustTxPower(
ULONG TxPwr[5];
CHAR Value;
+ if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)
+ || (pAd->bPCIclkOff == TRUE)
+ || RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF)
+ || RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
+ return;
+
if (pAd->CommonCfg.BBPCurrentBW == BW_40)
{
if (pAd->CommonCfg.CentralChannel > 14)
@@ -6493,10 +6582,10 @@ VOID AsicForceSleep(
*/
VOID AsicForceWakeup(
IN PRTMP_ADAPTER pAd,
- IN BOOLEAN bFromTx)
+ IN UCHAR Level)
{
DBGPRINT(RT_DEBUG_TRACE, ("--> AsicForceWakeup \n"));
- RT28XX_STA_FORCE_WAKEUP(pAd, bFromTx);
+ RT28XX_STA_FORCE_WAKEUP(pAd, Level);
}
#endif // CONFIG_STA_SUPPORT //
/*
@@ -7585,9 +7674,30 @@ BOOLEAN AsicSendCommandToMcu(
#endif // RALINK_ATE //
#endif // RT2860 //
{
+ UINT32 Data;
+
+ // Reset DMA
+ RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data);
+ Data |= 0x2;
+ RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data);
+
+ // After Reset DMA, DMA index will become Zero. So Driver need to reset all ring indexs too.
+ // Reset DMA/CPU ring index
+ RTMPRingCleanUp(pAd, QID_AC_BK);
+ RTMPRingCleanUp(pAd, QID_AC_BE);
+ RTMPRingCleanUp(pAd, QID_AC_VI);
+ RTMPRingCleanUp(pAd, QID_AC_VO);
+ RTMPRingCleanUp(pAd, QID_HCCA);
+ RTMPRingCleanUp(pAd, QID_MGMT);
+ RTMPRingCleanUp(pAd, QID_RX);
+
+ // Clear Reset
+ RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data);
+ Data &= 0xfffffffd;
+ RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data);
DBGPRINT_ERR(("H2M_MAILBOX still hold by MCU. command fail\n"));
}
- return FALSE;
+ //return FALSE;
}
#ifdef RT2860
@@ -8518,6 +8628,106 @@ VOID AsicStaBbpTuning(
}
}
+
+VOID AsicResetFromDMABusy(
+ IN PRTMP_ADAPTER pAd)
+{
+ UINT32 Data;
+ BOOLEAN bCtrl = FALSE;
+
+ DBGPRINT(RT_DEBUG_TRACE, ("---> AsicResetFromDMABusy !!!!!!!!!!!!!!!!!!!!!!! \n"));
+
+ // Be sure restore link control value so we can write register.
+ RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
+ if (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND))
+ {
+ DBGPRINT(RT_DEBUG_TRACE,("AsicResetFromDMABusy==>\n"));
+ RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_HALT);
+ RTMPusecDelay(6000);
+ pAd->bPCIclkOff = FALSE;
+ bCtrl = TRUE;
+ }
+ // Reset DMA
+ RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data);
+ Data |= 0x2;
+ RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data);
+
+ // After Reset DMA, DMA index will become Zero. So Driver need to reset all ring indexs too.
+ // Reset DMA/CPU ring index
+ RTMPRingCleanUp(pAd, QID_AC_BK);
+ RTMPRingCleanUp(pAd, QID_AC_BE);
+ RTMPRingCleanUp(pAd, QID_AC_VI);
+ RTMPRingCleanUp(pAd, QID_AC_VO);
+ RTMPRingCleanUp(pAd, QID_HCCA);
+ RTMPRingCleanUp(pAd, QID_MGMT);
+ RTMPRingCleanUp(pAd, QID_RX);
+
+ // Clear Reset
+ RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data);
+ Data &= 0xfffffffd;
+ RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data);
+
+ // If in Radio off, should call RTMPPCIePowerLinkCtrl again.
+ if ((bCtrl == TRUE) && (pAd->StaCfg.bRadio == FALSE))
+ RTMPPCIeLinkCtrlSetting(pAd, 3);
+
+ RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
+ RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST | fRTMP_ADAPTER_HALT_IN_PROGRESS);
+ DBGPRINT(RT_DEBUG_TRACE, ("<--- AsicResetFromDMABusy !!!!!!!!!!!!!!!!!!!!!!! \n"));
+}
+
+VOID AsicResetBBP(
+ IN PRTMP_ADAPTER pAd)
+{
+ DBGPRINT(RT_DEBUG_TRACE, ("---> Asic HardReset BBP !!!!!!!!!!!!!!!!!!!!!!! \n"));
+
+ RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x0);
+ RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x2);
+ RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0xc);
+
+ // After hard-reset BBP, initialize all BBP values.
+ NICRestoreBBPValue(pAd);
+ DBGPRINT(RT_DEBUG_TRACE, ("<--- Asic HardReset BBP !!!!!!!!!!!!!!!!!!!!!!! \n"));
+}
+
+VOID AsicResetMAC(
+ IN PRTMP_ADAPTER pAd)
+{
+ ULONG Data;
+
+ DBGPRINT(RT_DEBUG_TRACE, ("---> AsicResetMAC !!!! \n"));
+ RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data);
+ Data |= 0x4;
+ RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data);
+ Data &= 0xfffffffb;
+ RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data);
+
+ DBGPRINT(RT_DEBUG_TRACE, ("<--- AsicResetMAC !!!! \n"));
+}
+
+VOID AsicResetPBF(
+ IN PRTMP_ADAPTER pAd)
+{
+ ULONG Value1, Value2;
+ ULONG Data;
+
+ RTMP_IO_READ32(pAd, TXRXQ_PCNT, &Value1);
+ RTMP_IO_READ32(pAd, PBF_DBG, &Value2);
+
+ Value2 &= 0xff;
+ // sum should be equals to 0xff, which is the total buffer size.
+ if ((Value1 + Value2) < 0xff)
+ {
+ DBGPRINT(RT_DEBUG_TRACE, ("---> Asic HardReset PBF !!!! \n"));
+ RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data);
+ Data |= 0x8;
+ RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data);
+ Data &= 0xfffffff7;
+ RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data);
+
+ DBGPRINT(RT_DEBUG_TRACE, ("<--- Asic HardReset PBF !!!! \n"));
+ }
+}
#endif // CONFIG_STA_SUPPORT //
VOID RTMPSetAGCInitValue(
diff --git a/drivers/staging/rt2860/common/rtmp_init.c b/drivers/staging/rt2860/common/rtmp_init.c
index 563f2c5bb856..19a21ff489a5 100644
--- a/drivers/staging/rt2860/common/rtmp_init.c
+++ b/drivers/staging/rt2860/common/rtmp_init.c
@@ -2041,6 +2041,131 @@ NDIS_STATUS NICInitializeAsic(
return NDIS_STATUS_SUCCESS;
}
+
+VOID NICRestoreBBPValue(
+ IN PRTMP_ADAPTER pAd)
+{
+ UCHAR index;
+ UCHAR Value;
+ ULONG Data;
+
+ DBGPRINT(RT_DEBUG_TRACE, ("---> NICRestoreBBPValue !!!!!!!!!!!!!!!!!!!!!!! \n"));
+ // Initialize BBP register to default value (rtmp_init.c)
+ for (index = 0; index < NUM_BBP_REG_PARMS; index++)
+ {
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBPRegTable[index].Register, BBPRegTable[index].Value);
+ }
+ // copy from (rtmp_init.c)
+ if (pAd->MACVersion == 0x28600100)
+ {
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16);
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x12);
+ }
+
+ // copy from (connect.c LinkUp function)
+ if (INFRA_ON(pAd))
+ {
+ // Change to AP channel
+ if ((pAd->CommonCfg.CentralChannel > pAd->CommonCfg.Channel) && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40))
+ {
+ // Must using 40MHz.
+ pAd->CommonCfg.BBPCurrentBW = BW_40;
+ AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
+ AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
+
+ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value);
+ Value &= (~0x18);
+ Value |= 0x10;
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value);
+
+ // RX : control channel at lower
+ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
+ Value &= (~0x20);
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
+ // Record BBPR3 setting, But don't keep R Antenna # information.
+ pAd->StaCfg.BBPR3 = Value;
+
+ RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data);
+ Data &= 0xfffffffe;
+ RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Data);
+
+ if (pAd->MACVersion == 0x28600100)
+ {
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x1A);
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0A);
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x16);
+ DBGPRINT(RT_DEBUG_TRACE, ("!!!rt2860C !!! \n" ));
+ }
+
+ DBGPRINT(RT_DEBUG_TRACE, ("!!!40MHz Lower LINK UP !!! Control Channel at Below. Central = %d \n", pAd->CommonCfg.CentralChannel ));
+ }
+ else if ((pAd->CommonCfg.CentralChannel < pAd->CommonCfg.Channel) && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40))
+ {
+ // Must using 40MHz.
+ pAd->CommonCfg.BBPCurrentBW = BW_40;
+ AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
+ AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
+
+ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value);
+ Value &= (~0x18);
+ Value |= 0x10;
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value);
+
+ RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data);
+ Data |= 0x1;
+ RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Data);
+
+ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
+ Value |= (0x20);
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
+ // Record BBPR3 setting, But don't keep R Antenna # information.
+ pAd->StaCfg.BBPR3 = Value;
+
+ if (pAd->MACVersion == 0x28600100)
+ {
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x1A);
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0A);
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x16);
+ DBGPRINT(RT_DEBUG_TRACE, ("!!!rt2860C !!! \n" ));
+ }
+
+ DBGPRINT(RT_DEBUG_TRACE, ("!!!40MHz Upper LINK UP !!! Control Channel at UpperCentral = %d \n", pAd->CommonCfg.CentralChannel ));
+ }
+ else
+ {
+ pAd->CommonCfg.BBPCurrentBW = BW_20;
+ AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
+ AsicLockChannel(pAd, pAd->CommonCfg.Channel);
+
+ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value);
+ Value &= (~0x18);
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value);
+
+ RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data);
+ Data &= 0xfffffffe;
+ RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Data);
+
+ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
+ Value &= (~0x20);
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
+ // Record BBPR3 setting, But don't keep R Antenna # information.
+ pAd->StaCfg.BBPR3 = Value;
+
+ if (pAd->MACVersion == 0x28600100)
+ {
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16);
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x08);
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x11);
+ DBGPRINT(RT_DEBUG_TRACE, ("!!!rt2860C !!! \n" ));
+ }
+
+ DBGPRINT(RT_DEBUG_TRACE, ("!!!20MHz LINK UP !!! \n" ));
+ }
+ }
+
+ DBGPRINT(RT_DEBUG_TRACE, ("<--- NICRestoreBBPValue !!!!!!!!!!!!!!!!!!!!!!! \n"));
+}
+
/*
========================================================================
@@ -3032,6 +3157,7 @@ VOID UserCfgInit(
pAd->LedIndicatorStregth = 0;
pAd->RLnkCtrlOffset = 0;
pAd->HostLnkCtrlOffset = 0;
+ pAd->CheckDmaBusyCount = 0;
#endif // RT2860 //
pAd->bAutoTxAgcA = FALSE; // Default is OFF
@@ -3308,7 +3434,7 @@ VOID UserCfgInit(
pAd->bPCIclkOff = FALSE;
#endif // RT2860 //
-
+ RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
DBGPRINT(RT_DEBUG_TRACE, ("<-- UserCfgInit\n"));
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-12 15:19:27 +0000