diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/dma/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/dma/xilinx/xilinx_vdma.c | 73 |
2 files changed, 66 insertions, 9 deletions
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index d96d87c56f2e..2846753ddf6c 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -507,7 +507,7 @@ config XGENE_DMA config XILINX_VDMA tristate "Xilinx AXI VDMA Engine" - depends on (ARCH_ZYNQ || MICROBLAZE) + depends on (ARCH_ZYNQ || MICROBLAZE || ARM64) select DMA_ENGINE help Enable support for Xilinx AXI VDMA Soft IP. diff --git a/drivers/dma/xilinx/xilinx_vdma.c b/drivers/dma/xilinx/xilinx_vdma.c index 0ee0321868d3..abe915c73266 100644 --- a/drivers/dma/xilinx/xilinx_vdma.c +++ b/drivers/dma/xilinx/xilinx_vdma.c @@ -100,6 +100,7 @@ #define XILINX_VDMA_FRMDLY_STRIDE_STRIDE_SHIFT 0 #define XILINX_VDMA_REG_START_ADDRESS(n) (0x000c + 4 * (n)) +#define XILINX_VDMA_REG_START_ADDRESS_64(n) (0x000c + 8 * (n)) /* HW specific definitions */ #define XILINX_VDMA_MAX_CHANS_PER_DEVICE 0x2 @@ -144,7 +145,7 @@ * @next_desc: Next Descriptor Pointer @0x00 * @pad1: Reserved @0x04 * @buf_addr: Buffer address @0x08 - * @pad2: Reserved @0x0C + * @buf_addr_msb: MSB of Buffer address @0x0C * @vsize: Vertical Size @0x10 * @hsize: Horizontal Size @0x14 * @stride: Number of bytes between the first @@ -154,7 +155,7 @@ struct xilinx_vdma_desc_hw { u32 next_desc; u32 pad1; u32 buf_addr; - u32 pad2; + u32 buf_addr_msb; u32 vsize; u32 hsize; u32 stride; @@ -207,6 +208,7 @@ struct xilinx_vdma_tx_descriptor { * @config: Device configuration info * @flush_on_fsync: Flush on Frame sync * @desc_pendingcount: Descriptor pending count + * @ext_addr: Indicates 64 bit addressing is supported by dma channel */ struct xilinx_vdma_chan { struct xilinx_vdma_device *xdev; @@ -230,6 +232,7 @@ struct xilinx_vdma_chan { struct xilinx_vdma_config config; bool flush_on_fsync; u32 desc_pendingcount; + bool ext_addr; }; /** @@ -240,6 +243,7 @@ struct xilinx_vdma_chan { * @chan: Driver specific VDMA channel * @has_sg: Specifies whether Scatter-Gather is present or not * @flush_on_fsync: Flush on frame sync + * @ext_addr: Indicates 64 bit addressing is supported by dma device */ struct xilinx_vdma_device { void __iomem *regs; @@ -248,6 +252,7 @@ struct xilinx_vdma_device { struct xilinx_vdma_chan *chan[XILINX_VDMA_MAX_CHANS_PER_DEVICE]; bool has_sg; u32 flush_on_fsync; + bool ext_addr; }; /* Macros */ @@ -299,6 +304,27 @@ static inline void vdma_ctrl_set(struct xilinx_vdma_chan *chan, u32 reg, vdma_ctrl_write(chan, reg, vdma_ctrl_read(chan, reg) | set); } +/** + * vdma_desc_write_64 - 64-bit descriptor write + * @chan: Driver specific VDMA channel + * @reg: Register to write + * @value_lsb: lower address of the descriptor. + * @value_msb: upper address of the descriptor. + * + * Since vdma driver is trying to write to a register offset which is not a + * multiple of 64 bits(ex : 0x5c), we are writing as two separate 32 bits + * instead of a single 64 bit register write. + */ +static inline void vdma_desc_write_64(struct xilinx_vdma_chan *chan, u32 reg, + u32 value_lsb, u32 value_msb) +{ + /* Write the lsb 32 bits*/ + writel(value_lsb, chan->xdev->regs + chan->desc_offset + reg); + + /* Write the msb 32 bits */ + writel(value_msb, chan->xdev->regs + chan->desc_offset + reg + 4); +} + /* ----------------------------------------------------------------------------- * Descriptors and segments alloc and free */ @@ -693,9 +719,16 @@ static void xilinx_vdma_start_transfer(struct xilinx_vdma_chan *chan) list_for_each_entry(desc, &chan->pending_list, node) { segment = list_first_entry(&desc->segments, struct xilinx_vdma_tx_segment, node); - vdma_desc_write(chan, + if (chan->ext_addr) + vdma_desc_write_64(chan, + XILINX_VDMA_REG_START_ADDRESS_64(i++), + segment->hw.buf_addr, + segment->hw.buf_addr_msb); + else + vdma_desc_write(chan, XILINX_VDMA_REG_START_ADDRESS(i++), segment->hw.buf_addr); + last = segment; } @@ -987,10 +1020,21 @@ xilinx_vdma_dma_prep_interleaved(struct dma_chan *dchan, hw->stride |= chan->config.frm_dly << XILINX_VDMA_FRMDLY_STRIDE_FRMDLY_SHIFT; - if (xt->dir != DMA_MEM_TO_DEV) - hw->buf_addr = xt->dst_start; - else - hw->buf_addr = xt->src_start; + if (xt->dir != DMA_MEM_TO_DEV) { + if (chan->ext_addr) { + hw->buf_addr = lower_32_bits(xt->dst_start); + hw->buf_addr_msb = upper_32_bits(xt->dst_start); + } else { + hw->buf_addr = xt->dst_start; + } + } else { + if (chan->ext_addr) { + hw->buf_addr = lower_32_bits(xt->src_start); + hw->buf_addr_msb = upper_32_bits(xt->src_start); + } else { + hw->buf_addr = xt->src_start; + } + } /* Insert the segment into the descriptor segments list. */ list_add_tail(&segment->node, &desc->segments); @@ -1140,6 +1184,7 @@ static int xilinx_vdma_chan_probe(struct xilinx_vdma_device *xdev, chan->xdev = xdev; chan->has_sg = xdev->has_sg; chan->desc_pendingcount = 0x0; + chan->ext_addr = xdev->ext_addr; spin_lock_init(&chan->lock); INIT_LIST_HEAD(&chan->pending_list); @@ -1254,7 +1299,7 @@ static int xilinx_vdma_probe(struct platform_device *pdev) struct xilinx_vdma_device *xdev; struct device_node *child; struct resource *io; - u32 num_frames; + u32 num_frames, addr_width; int i, err; /* Allocate and initialize the DMA engine structure */ @@ -1284,6 +1329,18 @@ static int xilinx_vdma_probe(struct platform_device *pdev) if (err < 0) dev_warn(xdev->dev, "missing xlnx,flush-fsync property\n"); + err = of_property_read_u32(node, "xlnx,addrwidth", &addr_width); + if (err < 0) + dev_warn(xdev->dev, "missing xlnx,addrwidth property\n"); + + if (addr_width > 32) + xdev->ext_addr = true; + else + xdev->ext_addr = false; + + /* Set the dma mask bits */ + dma_set_mask(xdev->dev, DMA_BIT_MASK(addr_width)); + /* Initialize the DMA engine */ xdev->common.dev = &pdev->dev; |