summaryrefslogtreecommitdiff
path: root/sound/pci/ca0106/ca0106.h
diff options
context:
space:
mode:
Diffstat (limited to 'sound/pci/ca0106/ca0106.h')
-rw-r--r--sound/pci/ca0106/ca0106.h18
1 files changed, 9 insertions, 9 deletions
diff --git a/sound/pci/ca0106/ca0106.h b/sound/pci/ca0106/ca0106.h
index f246e6094289..991b1c5d41d5 100644
--- a/sound/pci/ca0106/ca0106.h
+++ b/sound/pci/ca0106/ca0106.h
@@ -59,15 +59,15 @@
/* PCI function 0 registers, address = <val> + PCIBASE0 */
/************************************************************************************************/
-#define PTR 0x00 /* Indexed register set pointer register */
+#define CA0106_PTR 0x00 /* Indexed register set pointer register */
/* NOTE: The CHANNELNUM and ADDRESS words can */
/* be modified independently of each other. */
/* CNL[1:0], ADDR[27:16] */
-#define DATA 0x04 /* Indexed register set data register */
+#define CA0106_DATA 0x04 /* Indexed register set data register */
/* DATA[31:0] */
-#define IPR 0x08 /* Global interrupt pending register */
+#define CA0106_IPR 0x08 /* Global interrupt pending register */
/* Clear pending interrupts by writing a 1 to */
/* the relevant bits and zero to the other bits */
#define IPR_MIDI_RX_B 0x00020000 /* MIDI UART-B Receive buffer non-empty */
@@ -88,7 +88,7 @@
#define IPR_MIDI_TX_A 0x00000002 /* MIDI UART-A Transmit buffer empty */
#define IPR_PCI 0x00000001 /* PCI Bus error */
-#define INTE 0x0c /* Interrupt enable register */
+#define CA0106_INTE 0x0c /* Interrupt enable register */
#define INTE_MIDI_RX_B 0x00020000 /* MIDI UART-B Receive buffer non-empty */
#define INTE_MIDI_TX_B 0x00010000 /* MIDI UART-B Transmit buffer empty */
@@ -108,8 +108,8 @@
#define INTE_MIDI_TX_A 0x00000002 /* MIDI UART-A Transmit buffer empty */
#define INTE_PCI 0x00000001 /* PCI Bus error */
-#define UNKNOWN10 0x10 /* Unknown ??. Defaults to 0 */
-#define HCFG 0x14 /* Hardware config register */
+#define CA0106_UNKNOWN10 0x10 /* Unknown ??. Defaults to 0 */
+#define CA0106_HCFG 0x14 /* Hardware config register */
/* 0x1000 causes AC3 to fails. It adds a dither bit. */
#define HCFG_STAC 0x10000000 /* Special mode for STAC9460 Codec. */
@@ -133,7 +133,7 @@
#define HCFG_AUDIOENABLE 0x00000001 /* 0 = CODECs transmit zero-valued samples */
/* Should be set to 1 when the EMU10K1 is */
/* completely initialized. */
-#define GPIO 0x18 /* Defaults: 005f03a3-Analog, 005f02a2-SPDIF. */
+#define CA0106_GPIO 0x18 /* Defaults: 005f03a3-Analog, 005f02a2-SPDIF. */
/* Here pins 0,1,2,3,4,,6 are output. 5,7 are input */
/* For the Audigy LS, pin 0 (or bit 8) controls the SPDIF/Analog jack. */
/* SB Live 24bit:
@@ -152,9 +152,9 @@
* GPO [15:8] Default 0x9. (Default to SPDIF jack enabled for SPDIF)
* GPO Enable [23:16] Default 0x0f. Setting a bit to 1, causes the pin to be an output pin.
*/
-#define AC97DATA 0x1c /* AC97 register set data register (16 bit) */
+#define CA0106_AC97DATA 0x1c /* AC97 register set data register (16 bit) */
-#define AC97ADDRESS 0x1e /* AC97 register set address register (8 bit) */
+#define CA0106_AC97ADDRESS 0x1e /* AC97 register set address register (8 bit) */
/********************************************************************************************************/
/* CA0106 pointer-offset register set, accessed through the PTR and DATA registers */