Age | Commit message (Collapse) | Author |
|
Use OD (pp_od_clk_voltage) interface to report current limits,
default or those set by user, for SCLK and UCLK on aldebaran.
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support for MACO flag checking.
MACO mode only works if BACO is supported.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
pptable_funcs
Use a unified and more explicit name get_bamaco_support
to replace is_baco_support and get_asic_baco_capability
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.9-2024-03-01:
amdgpu:
- GC 11.5.1 updates
- Misc display cleanups
- NBIO 7.9 updates
- Backlight fixes
- DMUB fixes
- MPO fixes
- atomfirmware table updates
- SR-IOV fixes
- VCN 4.x updates
- use RMW accessors for pci config registers
- PSR fixes
- Suspend/resume fixes
- RAS fixes
- ABM fixes
- Misc code cleanups
- SI DPM fix
- Revert freesync video
amdkfd:
- Misc cleanups
- Error handling fixes
radeon:
- use RMW accessors for pci config registers
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240301204857.13960-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Fix mask used for esm ctrl register to get pcie link
speed on smu_v11_0_3, smu_v13_0_2 & smu_v13_0_6
Fixes: 511a95552ec8 ("drm/amd/pm: Add SMU 13.0.6 support")
Fixes: c05d1c401572 ("drm/amd/swsmu: add aldebaran smu13 ip support (v3)")
Fixes: f1c378593153 ("drm/amd/powerplay: add Arcturus support for gpu metrics export")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Skip reporting pcie link width/speed on vfs for
smu_v13_0_6 & smu_v13_0_2
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This removes the currently unused CLASS_DDC support (controllers set
the flag, but there is no client to use it).
Also, CLASS_SPD support gets simplified to prepare removal in the
future. Class based instantiation is not recommended these days
anyhow.
Furthermore, I2C core now creates a debugfs directory per I2C adapter.
Current bus driver users were converted to use it.
Finally, quite some driver updates. Standing out are patches for the
wmt-driver which is refactored to support more variants.
This is the rebased pull request where a large series for the
designware driver was dropped"
* tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
MAINTAINERS: use proper email for my I2C work
i2c: stm32f7: add support for stm32mp25 soc
i2c: stm32f7: perform I2C_ISR read once at beginning of event isr
dt-bindings: i2c: document st,stm32mp25-i2c compatible
i2c: stm32f7: simplify status messages in case of errors
i2c: stm32f7: perform most of irq job in threaded handler
i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq
i2c: i801: Add lis3lv02d for Dell XPS 15 7590
i2c: i801: Add lis3lv02d for Dell Precision 3540
i2c: wmt: Reduce redundant: REG_CR setting
i2c: wmt: Reduce redundant: function parameter
i2c: wmt: Reduce redundant: clock mode setting
i2c: wmt: Reduce redundant: wait event complete
i2c: wmt: Reduce redundant: bus busy check
i2c: mux: reg: Remove class-based device auto-detection support
i2c: make i2c_bus_type const
dt-bindings: at24: add ROHM BR24G04
eeprom: at24: use of_match_ptr()
i2c: cpm: Remove linux,i2c-index conversion from be32
i2c: imx: Make SDA actually optional for bus recovering
...
|
|
I2C_CLASS_SPD was used to expose the EEPROM content to user space,
via the legacy eeprom driver. Now that this driver has been removed,
we can remove I2C_CLASS_SPD support. at24 driver with explicit
instantiation should be used instead.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
When kzalloc() for smu_table->ecc_table fails, we should free
the previously allocated resources to prevent memleak.
Fixes: edd794208555 ("drm/amd/pm: add message smu to get ecc_table v2")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When kzalloc() for smu_table->ecc_table fails, we should free
the previously allocated resources to prevent memleak.
Fixes: edd794208555 ("drm/amd/pm: add message smu to get ecc_table v2")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
is_mode1_reset_supported may be called before smu init, when smu_context
is unitialized in driver load/unload test. Call smu_cmn_get_smc_version
explicitly in is_mode1_reset_supported.
v2: apply to aldebaran in case is_mode1_reset_supported will be
uncommented (Candice Li)
Fixes: 710d9caec70c ("drm/amd/pm: drop most smu_cmn_get_smc_version in smu")
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Candice Li <candice.li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Support for getting power1_cap_min value on smu13 and smu11.
For other Asics, we still use 0 as the default value.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
smu_check_fw_version is called in smu hw init, thus smu if version
and version are garenteed to be stored in smu context. No need to
call smu_cmn_get_smc_version again after system boot up.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Keep FRU related information together in a separate structure.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
ppt level
The allow_xgmi_power_down(true/false) will be generally replaced by:
- allow: select_xgmi_plpd_policy(XGMI_PLPD_DEFAULT)
- disallow: select_xgmi_plpd_policy(XGMI_PLPD_DISALLOW)
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
split switch statement into two and consolidate the common
code for printing most of the types of clock speeds
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use variables to remove ternary expression in print statement
and improve readability. This will help to optimize the code
duplication in the switch statement
Also Changed:
replaced single_dpm_table->count as iterator in for loops
with safer clocks_num_levels value
replaced dpm_table.value usage with local var clocks_mhz
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use variables to remove the multiple nested ternary expressions
and improve readability. This will help to optimize the code
duplication in the switch statement
Also Changed:
Modify function aldebaran_get_clk_table to void function as it
always returns 0
Use const string "attempt_string" to cut down on repetition
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace print_clock_levels with emit_clock_levels for aldebaran
* replace .print_clk_levels with .emit_clk_levels in aldebaran_ppt_funcs
* added extra parameter int *offset
* removed var size, uses arg *offset instead
* removed call to smu_cmn_get_sysfs_buf
* errors are returned to caller
* returns 0 on success
additional incidental changes
* changed type of vars i, now to remove comparing mismatch types
* renamed var s/now/cur_value/
* switch statement default now returns -EINVAL
* RAS Recovery returns -EBUSY
Based on
commit b06b48d7ddae ("amdgpu/pm: Implement emit_clk_levels for navi10")
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is a spelling mistake in variable throtting_events, rename
it to throttling_events.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use the clearer name `AMDGPU_PP_SENSOR_GPU_AVG_POWER` instead.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Aldebaran can only return average socket power for the first die.
The other dies return 0. Instead of returning a bad value, return
-EOPNOTSUPP so that the attribute will be hidden.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
aldebaran_get_gpu_power() is only called by one place and just calls
aldebaran_get_smu_metrics_data(), so drop the helper.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some GPUs have been overloading average power values and input power
values. To disambiguate these, introduce a new
`AMDGPU_PP_SENSOR_GPU_INPUT_POWER` and the GPUs that share input
power update to use this instead of average power.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2746
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix the following errors reported by checkpatch:
ERROR: that open brace { should be on the previous line
ERROR: space required after that ',' (ctx:VxV)
ERROR: spaces required around that '=' (ctx:VxW)
ERROR: else should follow close brace '}'
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
the smu driver_table is used for all types of smu
tables data transcation (e.g: PPtable, Metrics, i2c, Ecc..).
it is necessary to hold this lock to avoiding data tampering
during the i2c read operation.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Use the interface version directly from PMFW interface header file rather
than keeping another definition in common smu13 file.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Suggested by PMFW team and same as what did for gfxoff feature.
This can address some Mode1Reset failures observed on SMU13.0.0.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[v2]
simplified fix after Lijo's feedback
removed clocks.num_levels from calculation of loop count
removed unsafe accesses to shim table freq_values
retained corner case output only min,now if
clocks.num_levels == 1 && now > min
[v1]
added a check to populate and use SCLK shim table freq_values only
if using dpm_level == AMD_DPM_FORCED_LEVEL_MANUAL or
AMD_DPM_FORCED_LEVEL_PERF_DETERMINISM
removed clocks.num_levels from calculation of shim table size
removed unsafe accesses to shim table freq_values
output gfx_table values if using other dpm levels
added check for freq_match when using freq_values for when now == min_clk
== Test ==
LOGFILE=aldebaran-sclk.test.log
AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1`
AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'`
HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON}
lspci -nn | grep "VGA\|Display" > $LOGFILE
FILES="pp_od_clk_voltage
pp_dpm_sclk"
for f in $FILES
do
echo === $f === >> $LOGFILE
cat $HWMON_DIR/device/$f >> $LOGFILE
done
cat $LOGFILE
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[v2]
No Changes, added RB
[v1]
Size of pp_clock_levels_with_latency is PP_MAX_CLOCK_LEVELS, not MAX_NUM_CLOCKS.
Both are currently defined as 16, modifying in case one value is modified in future
Changed code in both arcturus and aldabaran.
Also removed unneeded var count, and used min_t function
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
So we can eventaully use them in the common smu code for
accessing the SMU mailboxes without needing a lot of
per asic logic in the common code.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SMU add a new variable mca_ceumc_addr to record
umc correctable error address in EccInfo table,
driver side add EccInfo_V2_t to support this feature
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On aldebaran, when thermal throttling happens due to excessive GPU
temperature, the reason for throttling event is missed in warning
message. This patch fixes it.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is abstracted well enough in the get_metrics_data function, so use
the function
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
support message SMU update bad channel info to update HBM bad channel
info in OOB table
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use uint64_t instead of an array of uint32_t. This can avoid
some non-necessary intermediate uint32_t -> uint64_t conversions.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The FRU and RAS EEPROMs share the same I2C bus on Aldebaran and Vega 20
ASICs. Set the FRU bus "pointer" to this single bus, as access to the FRU
is sought through that bus "pointer" and not through the RAS bus "pointer".
Cc: Roy Sun <Roy.Sun@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Fixes: 2f60dd50769efc ("drm/amd: Expose the FRU SMU I2C bus")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Return an error if someone tries to use the i2c bus when the
SMU is not running. Otherwise we can end up sending commands
to the SMU which will either get ignored or could cause other
issues depending on what state the GPU and SMU are in.
Cc: Luben.Tuikov@amd.com
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Expose both SMU I2C buses. Some boards use the same bus for both the RAS
and FRU EEPROMs and others use different buses. This enables the
additional I2C bus and sets the right buses to use for RAS and FRU EEPROM
access.
Cc: Roy Sun <Roy.Sun@amd.com>
Co-developed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
As all those related APIs are already well protected by
adev->pm.mutex and smu->message_lock.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
As all those related APIs are already well protected by
adev->pm.mutex and smu->message_lock.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
As all those APIs are already protected either by adev->pm.mutex
or smu->message_lock.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Instead of centralizing all headers in the same folder. Separate them into
different folders and place them among those source files those who really
need them.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This can cover the power implementation details. And as what did for
powerplay framework, we hook the smu_context to adev->powerplay.pp_handle.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
PMFW only returns 0 on master die and sends NACK back on other dies for
the message.
v2: only send GmiPwrDnControl msg on master die instead of all
dies.
v3: remove the pointer check for get_socket_id and get_die_id as they
should be present on Aldebaran.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On Aldebaran, the serial may be obtained from the FRU. Only overwrite
the serial with the unique_id if the serial is empty. This will support
printing serial numbers for mGPU devices where there are 2 unique_ids
for the 2 GPUs, but only one serial number for the board
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For Aldebaran chip passthrough case we need to intimate SMU
about special handling for SBR.On older chips we send
LightSBR to SMU, enabling the same for Aldebaran. Slight
difference, compared to previous chips, is on Aldebaran, SMU
would do a heavy reset on SBR. Hence, the word Heavy
instead of Light SBR is used for SMU to differentiate.
Reviewed by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: sashank saye <sashank.saye@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix the message argument.
0: Allow power down
1: Disallow power down
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Power states are not valid for arcturus and aldebaran, no need to
allocate memory.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|