summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
AgeCommit message (Collapse)Author
2023-01-06thermal/drivers/cxgb4: Use generic thermal_zone_get_trip() functionDaniel Lezcano
The thermal framework gives the possibility to register the trip points with the thermal zone. When that is done, no get_trip_* ops are needed and they can be removed. Convert ops content logic into generic trip points and register them with the thermal zone. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20221003092602.1323944-28-daniel.lezcano@linaro.org
2021-10-02ethernet: chelsio: use eth_hw_addr_set()Jakub Kicinski
Convert chelsio drivers from memcpy() and ether_addr_copy() to eth_hw_addr_set(). They lack includes. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24cxgb4: Remove unused vpd_param member ecHeiner Kallweit
Member ec isn't used, so remove it. Link: https://lore.kernel.org/r/30648e95-bfb9-9af3-0c8f-dd3e34df8b6b@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-06-04cxgb4: avoid link re-train during TC-MQPRIO configurationRahul Lakkireddy
When configuring TC-MQPRIO offload, only turn off netdev carrier and don't bring physical link down in hardware. Otherwise, when the physical link is brought up again after configuration, it gets re-trained and stalls ongoing traffic. Also, when firmware is no longer accessible or crashed, avoid sending FLOWC and waiting for reply that will never come. Fix following hung_task_timeout_secs trace seen in these cases. INFO: task tc:20807 blocked for more than 122 seconds. Tainted: G S 5.13.0-rc3+ #122 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:tc state:D stack:14768 pid:20807 ppid: 19366 flags:0x00000000 Call Trace: __schedule+0x27b/0x6a0 schedule+0x37/0xa0 schedule_preempt_disabled+0x5/0x10 __mutex_lock.isra.14+0x2a0/0x4a0 ? netlink_lookup+0x120/0x1a0 ? rtnl_fill_ifinfo+0x10f0/0x10f0 __netlink_dump_start+0x70/0x250 rtnetlink_rcv_msg+0x28b/0x380 ? rtnl_fill_ifinfo+0x10f0/0x10f0 ? rtnl_calcit.isra.42+0x120/0x120 netlink_rcv_skb+0x4b/0xf0 netlink_unicast+0x1a0/0x280 netlink_sendmsg+0x216/0x440 sock_sendmsg+0x56/0x60 __sys_sendto+0xe9/0x150 ? handle_mm_fault+0x6d/0x1b0 ? do_user_addr_fault+0x1c5/0x620 __x64_sys_sendto+0x1f/0x30 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f7f73218321 RSP: 002b:00007ffd19626208 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055b7c0a8b240 RCX: 00007f7f73218321 RDX: 0000000000000028 RSI: 00007ffd19626210 RDI: 0000000000000003 RBP: 000055b7c08680ff R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000055b7c085f5f6 R13: 000055b7c085f60a R14: 00007ffd19636470 R15: 00007ffd196262a0 Fixes: b1396c2bd675 ("cxgb4: parse and configure TC-MQPRIO offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-08cxgb4: remove unused vpd_cap_addrHeiner Kallweit
It is likely that this is a leftover from T3 driver heritage. cxgb4 uses the PCI core VPD access code that handles detection of VPD capabilities. Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-11-23net: don't include ethtool.h from netdevice.hJakub Kicinski
linux/netdevice.h is included in very many places, touching any of its dependecies causes large incremental builds. Drop the linux/ethtool.h include, linux/netdevice.h just needs a forward declaration of struct ethtool_ops. Fix all the places which made use of this implicit include. Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20201120225052.1427503-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-11cxgb4/ch_ktls: creating skbs causes panicRohit Maheshwari
Creating SKB per tls record and freeing the original one causes panic. There will be race if connection reset is requested. By freeing original skb, refcnt will be decremented and that means, there is no pending record to send, and so tls_dev_del will be requested in control path while SKB of related connection is in queue. Better approach is to use same SKB to send one record (partial data) at a time. We still have to create a new SKB when partial last part of a record is requested. This fix introduces new API cxgb4_write_partial_sgl() to send partial part of skb. Present cxgb4_write_sgl can only provide feasibility to start from an offset which limits to header only and it can write sgls for the whole skb len. But this new API will help in both. It can start from any offset and can end writing in middle of the skb. v4->v5: - Removed extra changes. Fixes: 429765a149f1 ("chcr: handle partial end part of a record") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-08cxgb4: convert tasklets to use new tasklet_setup() APIAllen Pais
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <apais@linux.microsoft.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-11crypto/chcr: move nic TLS functionality to drivers/netRohit Maheshwari
This patch moves complete nic tls offload (kTLS) code from crypto directory to drivers/net/ethernet/chelsio/inline_crypto/ch_ktls directory. nic TLS is made a separate ULD of cxgb4. Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09cxgb4/ch_ipsec: Registering xfrmdev_ops with cxgb4Ayush Sawal
As ch_ipsec was removed without clearing xfrmdev_ops and netdev feature(esp-hw-offload). When a recalculation of netdev feature is triggered by changing tls feature(tls-hw-tx-offload) from user request, it causes a page fault due to absence of valid xfrmdev_ops. Fixes: 6dad4e8ab3ec ("chcr: Add support for Inline IPSec") Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-21crypto/chcr: Moving chelsio's inline ipsec functionality to /drivers/netVinay Kumar Yadav
This patch seperates inline ipsec functionality from coprocessor driver chcr. Now inline ipsec is separate ULD, moved from "drivers/crypto/chelsio/" to "drivers/net/ethernet/chelsio/inline_crypto/ch_ipsec/" Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03cxgb4: add TC-MATCHALL IPv6 supportRahul Lakkireddy
Matching IPv6 traffic require allocating their own individual slots in TCAM. So, fetch additional slots to insert IPv6 rules. Also, fetch the cumulative stats of all the slots occupied by the Matchall rule. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-23cxgb4: add loopback ethtool self-testVishal Kulkarni
In this test, loopback pkt is created and sent on default queue. The packet goes until the Multi Port Switch (MPS) just before the MAC and based on the specified channel number, it either goes outside the wire on one of the physical ports or looped back to Rx path by MPS. In this case, we're specifying loopback channel, instead of physical ports, so the packet gets looped back to Rx path, instead of getting transmitted on the wire. v3: - Modify commit message to include test details. v2: - Add only loopback self-test. Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14cxgb4: convert to new udp_tunnel_nic infraJakub Kicinski
Convert to new infra, this driver is very simple. The check of adapter->rawf_cnt in cxgb_udp_tunnel_unset_port() is kept from the old port deletion function but it's dodgy since nothing ever updates that member once its set during init. Also .set_port callback always adds the raw mac filter.. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-30cxgb4: add main VI to mirror VI config replicationRahul Lakkireddy
When mirror VI is enabled, replicate various VI config params enabled on main VI to mirror VI. These include replicating MTU, promiscuous mode, all-multicast mode, and enabled netdev Rx feature offloads. v3: - Replace mirror VI refcount_t with normal u32 variable. - Add back calling cxgb4_port_mirror_start() in cxgb_open(), which was there in v1, but got missed in v2 during refactoring. v2: - Simplify the replication code by refactoring t4_set_rxmode() to handle mirror VI, instead of duplicating the t4_set_rxmode() calls in multiple places. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-30cxgb4: add support for mirror RxqsRahul Lakkireddy
When mirror VI is enabled, allocate the mirror Rxqs and setup the mirror VI RSS table. The mirror Rxqs are allocated/freed when the mirror VI is created/destroyed or when underlying port is brought up/down, respectively. v3: - Replace mirror VI refcount_t with normal u32 variable. v2: - Use mutex to protect all mirror VI data, instead of just mirror Rxqs. - Remove the un-needed mirror Rxq mutex. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-30cxgb4: add mirror action to TC-MATCHALL offloadRahul Lakkireddy
Add mirror Virtual Interface (VI) support to receive all ingress mirror traffic from the underlying device. The mirror VI is created dynamically, if the TC-MATCHALL rule has a corresponding mirror action. Also request MSI-X vectors needed for the mirror VI Rxqs. If no vectors are available, then disable mirror VI support. v3: - Replace mirror VI refcount_t with normal u32 variable. v2: - Add mutex to protect all mirror VI data, instead of just mirror Rxqs. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23cxgb4: always sync access when flashing PHY firmwareRahul Lakkireddy
Access to on-chip memory for flashing PHY firmware must always be synchronized. So, ensure the callers take on-chip memory lock. Also fixes following sparse warning: sge.c:1641:26: warning: context imbalance in 't4_load_phy_fw' - different lock contexts for basic block Fixes: 01b6961410b7 ("cxgb4: Add PHY firmware support for T420-BT cards") Fixes: 4ee339e1e92a ("cxgb4: add support to flash PHY image") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19cxgb4: add skeleton for ethtool n-tuple filtersVishal Kulkarni
Allocate and manage resources required for ethtool n-tuple filters. Also fetch the HASH filter region size and calculate nhash entries. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18cxgb4: add support to flash boot cfg imageVishal Kulkarni
Update set_flash to flash boot cfg image to flash region Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18cxgb4: add support to flash boot imageVishal Kulkarni
Update set_flash to flash boot image to flash region Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18cxgb4: add support to flash PHY imageVishal Kulkarni
Update set_flash to flash PHY image to flash region Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18cxgb4: update set_flash to flash different imagesVishal Kulkarni
Chelsio adapter contains different flash regions and each region is used by different binary files. This patch adds support to flash images like PHY firmware, boot and boot config using ethtool -f N. The N value mapping is as follows. N = 0 : Parse image and decide which region to flash N = 1 : Firmware N = 2 : PHY firmware N = 3 : boot image N = 4 : boot cfg Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>" Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01cxgb4/chcr: Enable ktls settings at run timeRohit Maheshwari
Current design enables ktls setting from start, which is not efficient. Now the feature will be enabled when user demands TLS offload on any interface. v1->v2: - taking ULD module refcount till any single connection exists. - taking rtnl_lock() before clearing tls_devops. v2->v3: - cxgb4 is now registering to tlsdev_ops. - module refcount inc/dec in chcr. - refcount is only for connections. - removed new code from cxgb_set_feature(). v3->v4: - fixed warning message. Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22cxgb4: add adapter hotplug support for ULDsPotnuri Bharat Teja
Upon adapter hotplug, cxgb4 registers ULD devices for all the ULDs that are already loaded, ensuring that ULD's can enumerate the hotplugged adapter without reloading the ULD. Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-15cxgb4: tune burst buffer size for TC-MQPRIO offloadRahul Lakkireddy
For each traffic class, firmware handles up to 4 * MTU amount of data per burst cycle. Under heavy load, this small buffer size is a bottleneck when buffering large TSO packets in <= 1500 MTU case. Increase the burst buffer size to 8 * MTU when supported. Also, keep the driver's traffic class configuration API similar to the firmware API counterpart. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-07cxgb4: remove duplicate headersChen Zhou
Remove duplicate headers which are included twice. Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08cxgb4/chcr : Register to tls add and del callbackRohit Maheshwari
A new macro is defined to enable ktls tx offload support on Chelsio T6 adapter. And if this macro is enabled, cxgb4 will send mailbox to enable or disable ktls settings on HW. In chcr, enabled tx offload flag in netdev and registered tls_dev_add and tls_dev_del. v1->v2: - mark tcb state to close in tls_dev_del. - u_ctx is now picked from adapter structure. - clear atid in case of failure. - corrected ULP_CRYPTO_KTLS_INLINE value. v2->v3: - add empty line after variable declaration. - local variable declaration in reverse christmas tree ordering. Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03net/chelsio: Delete drive and module versionsLeon Romanovsky
Clean the code related to various versions: driver and module. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Simple overlapping changes in bpf land wrt. bpf_helper_defs.h handling. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30cxgb4/cxgb4vf: fix flow control display for auto negotiationRahul Lakkireddy
As per 802.3-2005, Section Two, Annex 28B, Table 28B-2 [1], when _only_ Rx pause is enabled, both symmetric and asymmetric pause towards local device must be enabled. Also, firmware returns the local device's flow control pause params as part of advertised capabilities and negotiated params as part of current link attributes. So, fix up ethtool's flow control pause params fetch logic to read from acaps, instead of linkattr. [1] https://standards.ieee.org/standard/802_3-2005.html Fixes: c3168cabe1af ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities") Signed-off-by: Surendra Mobiya <surendra@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-10cxgb4: add support for high priority filtersShahjada Abul Husain
T6 has a separate region known as high priority filter region that allows classifying packets going through ULD path. So, query firmware for HPFILTER resources and enable the high priority offload filter support when it is available. Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-22cxgb4: add stats for MQPRIO QoS offload Tx pathRahul Lakkireddy
Export necessary stats for traffic flowing through MQPRIO QoS offload Tx path. v2: - No change. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22cxgb4: add UDP segmentation offload supportRahul Lakkireddy
Implement and export UDP segmentation offload (USO) support for both NIC and MQPRIO QoS offload Tx path. Update appropriate logic in Tx to parse GSO info in skb and configure FW_ETH_TX_EO_WR request needed to perform USO. v2: - Remove inline keyword from write_eo_udp_wr() in sge.c. Let the compiler decide. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22cxgb4/chcr: update SGL DMA unmap for USORahul Lakkireddy
The FW_ETH_TX_EO_WR used for sending UDP Segmentation Offload (USO) requests expects the headers to be part of the descriptor and the payload to be part of the SGL containing the DMA mapped addresses. Hence, the DMA address in the first entry of the SGL can start after the packet headers. Currently, unmap_sgl() tries to unmap from this wrong offset, instead of the originally mapped DMA address. So, use existing unmap_skb() instead, which takes originally saved DMA addresses as input. Update all necessary Tx paths to save the original DMA addresses, so that unmap_skb() can unmap them properly. v2: - No change. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-20cxgb4: check rule prio conflicts before offloadRahul Lakkireddy
Only offload rule if it satisfies both of the following conditions: 1. The immediate previous rule has priority <= current rule's priority. 2. The immediate next rule has priority >= current rule's priority. Also rework free entry fetch logic to search from end of TCAM, instead of beginning, because higher indices have lower priority than lower indices. This is similar to how TC auto generates priority values. v5: - Fixed commit message and comment to include comparison for equal priority. v4: - Patch added in this version. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20cxgb4: add TC-MATCHALL classifier egress offloadRahul Lakkireddy
Add TC-MATCHALL classifier offload with TC-POLICE action applied for all outgoing traffic on the underlying interface. Split flow block offload to support both egress and ingress classification. For example, to rate limit all outgoing traffic to 1 Gbps: $ tc qdisc add dev enp2s0f4 clsact $ tc filter add dev enp2s0f4 egress matchall skip_sw \ action police rate 1Gbit burst 8Kbit Note that skip_sw is important. Otherwise, both stack and hardware will end up doing policing. Policing can't be shared across flow blocks. Only 1 egress matchall rule can be active at a time on the underlying interface. v5: - No change. v4: - Removed check to reject police offload if prio is not 1. - Moved TC_SETUP_BLOCK code to separate function. v3: - Added check to reject police offload if prio is not 1. - Assign block_shared variable only for TC_SETUP_BLOCK. v2: - Added check to reject flow block sharing for policers. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07cxgb4: add FLOWC based QoS offloadRahul Lakkireddy
Rework SCHED API to allow offloading TC-MQPRIO QoS configuration. The existing QUEUE based rate limiting throttles all queues sharing a traffic class, to the specified max rate limit value. So, if multiple queues share a traffic class, then all the queues get the aggregate specified max rate limit. So, introduce the new FLOWC based rate limiting, where multiple queues can share a traffic class with each queue getting its own individual specified max rate limit. For example, if 2 queues are bound to class 0, which is rate limited to 1 Gbps, then 2 queues using QUEUE based rate limiting, get the aggregate output of 1 Gbps only. In FLOWC based rate limiting, each queue gets its own output of max 1 Gbps each; i.e. 2 queues * 1 Gbps rate limit = 2 Gbps. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07cxgb4: add Tx and Rx path for ETHOFLD trafficRahul Lakkireddy
Implement Tx path for traffic flowing through software EOSW_TXQ and EOHW_TXQ. Since multiple EOSW_TXQ can post packets to a single EOHW_TXQ, protect the hardware queue with necessary spinlock. Also, move common code used to generate TSO work request to a common function. Implement Rx path to handle Tx completions for successfully transmitted packets. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07cxgb4: add ETHOFLD hardware queue supportRahul Lakkireddy
Add support for configuring and managing ETHOFLD hardware queues. Keep the queue count and MSI-X allocation scheme same as NIC queues. ETHOFLD hardware queues are dynamically allocated/destroyed as TC-MQPRIO Qdisc offload is enabled/disabled on the corresponding interface, respectively. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07cxgb4: parse and configure TC-MQPRIO offloadRahul Lakkireddy
Add logic for validation and configuration of TC-MQPRIO Qdisc offload. Also, add support to manage EOSW_TXQ, which have 1-to-1 mapping with EOTIDs, and expose them to network stack. Move common skb validation in Tx path to a separate function and add minimal Tx path for ETHOFLD. Update Tx queue selection to return normal NIC Txq to send traffic pattern that can't go through ETHOFLD Tx path. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07cxgb4: rework queue config and MSI-X allocationRahul Lakkireddy
Simplify queue configuration and MSI-X allocation logic. Use a single MSI-X information table for both NIC and ULDs. Remove hard-coded MSI-X indices for firmware event queue and non data interrupts. Instead, use the MSI-X bitmap to obtain a free MSI-X index dynamically. Save each Rxq's index into the MSI-X information table, within the Rxq structures themselves, for easier cleanup. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07cxgb4: query firmware for QoS offload resourcesRahul Lakkireddy
QoS offload needs Ethernet Offload (ETHOFLD) resources present in the NIC. These resources are shared with other ULDs. So, query firmware for the available number of traffic classes, as well as, start and end indices (EOTID) of the ETHOFLD region. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24cxgb4: Add MPS refcounting for alloc/free mac filtersRaju Rangoju
This patch adds reference counting support for alloc/free mac filters Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24cxgb4: Add MPS TCAM refcounting for cxgb4 change macRaju Rangoju
This patch adds TCAM reference counting support for cxgb4 change mac path Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24cxgb4: Add MPS TCAM refcounting for raw mac filtersRaju Rangoju
This patch adds TCAM reference counting support for raw mac filters. Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24cxgb4: Re-work the logic for mps refcountingRaju Rangoju
Remove existing mps refcounting code which was added only for encap filters and add necessary data structures/functions to support mps reference counting for all the mac filters. Also add wrapper functions for allocating and freeing encap mac filters. Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-09cxgb4: Set initial IRQ affinity hintsNirranjan Kirubaharan
Spread initial IRQ affinity hints across the device node CPUs, for nic queue and uld queue IRQs, to load balance and avoid all interrupts on CPU0. Signed-off-by: Nirranjan Kirubaharan <nirranjan@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23cxgb4: use firmware API for validating filter specRaju Rangoju
Adds support for validating hardware filter spec configured in firmware before offloading exact match flows. Use the new fw api FW_PARAM_DEV_FILTER_MODE_MASK to read the filter mode and mask from firmware. If the api isn't supported, then fall-back to older way of reading just the mode from indirect register. Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22cxgb4: Enable hash filter with offloadVishal Kulkarni
Hash (exact-match) filters used for offloading flows share the same active region resources on the chip with upper layer drivers, like iw_cxgb4, chcr, etc. Currently, only either Hash filters or ULDs can use the active region resources, but not both. Hence, use the new firmware configuration parameters (when available) to allow both the Hash filters and ULDs to share the active region simultaneously. Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-01 04:52:06 +0000