summaryrefslogtreecommitdiff
path: root/drivers/regulator
AgeCommit message (Collapse)Author
2016-12-19Merge tag 'mfd-for-linus-4.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Device Support - Add support for Ricoh RC5T619 PMIC to rn5t618 - Add support for PM8821 PMIC to qcom-pm8xxx New Functionality: - Add support for GPIO to lpc_ich - Add support for GPADC to sun4i - Add ability for rk808 to shutdown Fix-ups: - Simplify/strip unnecessary code; tps65218, palmas, tps65217 - Device Tree binding updates; tps65218, altera-a10sr - Provide/export device ID info; tps65218, axp20x-i2c, hi655x-pmic, fsl-imx25-tsadc, intel_soc_pmic_bxtwc - Use MFD API instead of of_platform_populate(); tps65218 - Generalise name-space; pm8xxx - Supply/edit regmap configuration; axp20x, cs47l24-tables, axp20x - Enable compile testing; max77620, max77686, exynos-lpass, abx500-core - Coding style issues; wm8994-core, wm5102-tables - Supply endian support; syscon - Remove module support; ab3100-core, ab8500-debugfs, ab8500-gpadc, abx500-core Bug Fixes: - Fix ordering issues; wm8994 - Fix dependencies (build-time/run-time); exynos_lpass, sun4i-gpadc - Fix compiler warnings; sun4i-gpadc - Fix leaks; mfd-core - Fix page fault during module unload; tps65217" * tag 'mfd-for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits) mfd: tps65217: Support an interrupt pin as the system wakeup mfd: tps65217: Make an interrupt handler simpler mfd: tps65217: Update register interrupt mask bits instead of writing operation mfd: tps65217: Specify the IRQ name mfd: tps65217: Fix page fault on unloading modules mfd: palmas: Remove redundant check in palmas_power_off mfd: arizona: Disable IRQs during driver remove mfd: pm8xxx: add support to pm8821 mfd: intel-lpss: Try to enable Memory-Write-Invalidate mfd: rn5t618: Add Ricoh RC5T619 PMIC support mfd: axp20x: Add address extension registers for AXP806 regmap mfd: intel_soc_pmic_bxtwc: Fix a typo in MODULE_DEVICE_TABLE() mfd: core: Fix device reference leak in mfd_clone_cell mfd: bcm590xx: Simplify a test mfd: sun4i-gpadc: Select regmap-irq mfd: abx500-core: drop unused MODULE_ tags from non-modular code mfd: ab8500: make sysctrl explicitly non-modular mfd: ab8500-gpadc: Make it explicitly non-modular mfd: ab8500-debugfs: Make it explicitly non-modular mfd: ab8500-core: Make it explicitly non-modular ...
2016-12-14Merge tag 'sound-4.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "No dramatic changes are found in this development cycle, but as usual, many commits are applied in a wide range of drivers. Most of big changes are in ASoC, where a few bits of framework work and quite a lot of cleanups and improvements to existing code have been done. The rest are usual stuff, a few HD-audio and USB-audio quirks and fixes, as well as the drop of kthread usages in the whole subsystem. Below are some highlights: ASoC: - support for stereo DAPM controls - some initial work on the of-graph sound card - regmap conversions of the remaining AC'97 drivers - a new version of the topology ABI; this should be backward compatible - updates / cleanups of rsnd, sunxi, sti, nau8825, samsung, arizona, Intel skylake, atom-sst - new drivers for Cirrus Logic CS42L42, Qualcomm MSM8916-WCD, and Realtek RT5665 USB-audio: - yet another race fix at disconnection - tolerated packet size calculation for some Android devices - quirks for Axe-Fx II, QuickCam, TEAC 501/503 HD-audio: - improvement of Dell pin fixup mapping - quirks for HP Z1 Gen3, Alienware 15 R2 2016 and ALC622 headset mic Misc: - replace all kthread usages with simple works" * tag 'sound-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (296 commits) ALSA: hiface: Fix M2Tech hiFace driver sampling rate change ALSA: usb-audio: Eliminate noise at the start of DSD playback. ALSA: usb-audio: Add native DSD support for TEAC 501/503 DAC ASoC: wm_adsp: wm_adsp_buf_alloc should use kfree in error path ASoC: topology: avoid uninitialized kcontrol_type ALSA: usb-audio: Add QuickCam Communicate Deluxe/S7500 to volume_control_quirks ALSA: usb-audio: add implicit fb quirk for Axe-Fx II ASoC: zte: spdif: correct ZX_SPDIF_CLK_RAT define ASoC: zte: spdif and i2s drivers are not zx296702 specific ASoC: rsnd: setup BRGCKR/BRRA/BRRB when starting ASoC: rsnd: enable/disable ADG when suspend/resume timing ASoC: rsnd: tidyup ssi->usrcnt counter check in hw_params ALSA: cs46xx: add a new line ASoC: Intel: update bxt_da7219_max98357a to support quad ch dmic capture ASoC: nau8825: disable sinc filter for high THD of ADC ALSA: usb-audio: more tolerant packetsize ALSA: usb-audio: avoid setting of sample rate multiple times on bus ASoC: cs35l34: Simplify the logic to set CS35L34_MCLK_CTL setting ALSA: hda - Gate the mic jack on HP Z1 Gen3 AiO ALSA: hda: when comparing pin configurations, ignore assoc in addition to seq ...
2016-12-12Merge remote-tracking branches 'asoc/topic/of-graph', 'asoc/topic/pxa', ↵Mark Brown
'asoc/topic/qcom' and 'asoc/topic/rk808' into asoc-next
2016-12-12Merge remote-tracking branches 'regulator/topic/tps65086' and ↵Mark Brown
'regulator/topic/twl' into regulator-next
2016-12-12Merge remote-tracking branches 'regulator/topic/gpio', ↵Mark Brown
'regulator/topic/lp873x', 'regulator/topic/max77620', 'regulator/topic/pwm' and 'regulator/topic/tps6507x' into regulator-next
2016-12-12Merge remote-tracking branches 'regulator/topic/arizona', ↵Mark Brown
'regulator/topic/bypass', 'regulator/topic/error' and 'regulator/topic/fixed' into regulator-next
2016-12-12Merge remote-tracking branch 'regulator/topic/core' into regulator-nextMark Brown
2016-12-12Merge remote-tracking branches 'regulator/fix/stw481x' and ↵Mark Brown
'regulator/fix/tps65086' into regulator-linus
2016-12-12Merge remote-tracking branch 'regulator/fix/axp20x' into regulator-linusMark Brown
2016-12-05regulator: tps65086: Fix 25mV ranges for BUCK regulators 1, 2, and 6Andrew F. Davis
These regualtors output 0v when vsel is 0. The datasheet will be updated to reflect this. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2016-12-05regulator: core: add newline in debug messageDavid Lechner
This adds a trailing newline to a debug message. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-01regulator: tps65086: Fix 25mV ranges for BUCK regulatorsAndrew F. Davis
The BUCK regulators 3, 4, and 5 also have a 10mV step mode, adjust the tables and logic to reflect the data-sheet for these regulators. fixes: d2a2e729a666 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC") Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30regulator: core: Correct type of mode in regulator_mode_constrainCharles Keepax
Every function handling the mode within the regulator core uses an unsigned int for mode, except for regulator_mode_constrain. This patch changes the type of mode within regulator_mode_constrain which fixes several instances where we are passing pointers to unsigned ints then treating them as an int within this function. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-23regulator: max77620: add support to configure MPOKVenkat Reddy Talla
Adding support to configure regulator POK mapping bit to control nRST_IO and GPIO1 POK function. In tegra based platform which uses MAX20024 pmic, when some of regulators are configured FPS_NONE(flexible power sequencer) causes PMIC GPIO1 to go low which lead to various other rails turning off, to avoid this MPOK bit of those regulators need to be set to 0 so that PMIC GPIO1 will not go low. Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-23regulator: twl6030: Remove unused fields from struct twlreg_infoAxel Lin
The table_len, *table, remap and max_mV fields are not used, so remove them. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-23regulator: twl: Remove unused fields from struct twlreg_infoAxel Lin
The min_mV, max_mV and flags fields are not used, so remove them. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-16regulator: twl: split twl6030 logic into its own fileNicolae Rosia
In order to not break existing users, we keep using the same CONFIG symbol. This makes it easier to add support for TWL6032 and refactor mfd/twl-core. Checkpatch warnings are inherited from twl-regulator.c and will be addressed in a subsequent patch. Signed-off-by: Nicolae Rosia <Nicolae_Rosia@mentor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-16regulator: twl: kill unused functionsNicolae Rosia
This code was used by OMAP platform based boards which are now DT only. Proper support for SMPS is missing in this driver. Signed-off-by: Nicolae Rosia <Nicolae_Rosia@mentor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-16regulator: twl: make driver DT onlyNicolae Rosia
All users are DT only, remove unused code. Signed-off-by: Nicolae Rosia <Nicolae_Rosia@mentor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-16regulator: twl-regulator: rework fixed regulator definitionNicolae Rosia
TWL603X and TWL4030 are different and have different code logic. Rework the regulator definition method so we can split the file easily in twl4030 and twl6030. Signed-off-by: Nicolae Rosia <Nicolae_Rosia@mentor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-15regulator: max77620: remove unused variableVenkat Reddy Talla
max77620_reuglator_pdata structure variable reg_idata is not used anywhere in the regulator driver, so removing it. Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-13regulator: stw481x-vmmc: fix ages old enable errorLinus Walleij
The regulator has never been properly enabled, it has been dormant all the time. It's strange that MMC was working at all, but it likely worked by the signals going through the levelshifter and reaching the card anyways. Fixes: 3615a34ea1a6 ("regulator: add STw481x VMMC driver") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2016-11-11regulator: gpio: properly check return value of of_get_named_gpioJisheng Zhang
The function of_get_named_gpio() could return -ENOENT, -EPROBE_DEFER -EINVAL and so on. Currently, for the optional property "enable-gpio", we only check -EPROBE_DEFER, this is not enough since there may be misconfigured "enable-gpio" in the DTB, of_get_named_gpio() will return -EINVAL in this case, we should return immediately here. And for the optional property "gpios", we didn't check the return value, the driver will continue to the point where gpio_request_array() is called, it doesn't make sense to continue if we got -EPROBE_DEFER or -EINVAL here. This patch tries to address these two issues by properly checking the return value of of_get_named_gpio. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11regulator: lp873x: Add support for populating input supplyLokesh Vutla
In order to have a proper topology of regulators for a platform, each registering regulator needs to populate supply_name field for identifying its supply's name. Add supply_name field for lp873x regulators. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11regulator: axp20x: Fix axp809 ldo_io registration error on cold bootChen-Yu Tsai
The maximum supported voltage for ldo_io# is 3.3V, but on cold boot the selector comes up at 0x1f, which maps to 3.8V. This was previously corrected by Allwinner's U-boot, which set all regulators on the PMICs to some pre-configured voltage. With recent progress in U-boot SPL support, this is no longer the case. In any case we should handle this quirk in the kernel driver as well. This invalid setting causes _regulator_get_voltage() to fail with -EINVAL which causes regulator registration to fail when constrains are used: [ 1.054181] vcc-pg: failed to get the current voltage(-22) [ 1.059670] axp20x-regulator axp20x-regulator.0: Failed to register ldo_io0 [ 1.069749] axp20x-regulator: probe of axp20x-regulator.0 failed with error -22 This commits makes the axp20x regulator driver accept the 0x1f register value, fixing this. The datasheet does not guarantee reliable operation above 3.3V, so on boards where this regulator is used the regulator-max-microvolt setting must be 3.3V or less. This is essentially the same as the commit f40d4896bf32 ("regulator: axp20x: Fix axp22x ldo_io registration error on cold boot") for AXP22x PMICs. Fixes: a51f9f4622a3 ("regulator: axp20x: support AXP809 variant") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-10regulators: helpers: Fix handling of bypass_val_on in get_bypass_regmapCharles Keepax
The handling of bypass_val_on that was added in regulator_get_bypass_regmap is done unconditionally however several drivers don't define a value for bypass_val_on. This results in those drivers reporting bypass being enabled when it is not. In regulator_set_bypass_regmap we use bypass_mask if bypass_val_on is zero. This patch adds similar handling in regulator_get_bypass_regmap. Fixes: commit dd1a571daee7 ("regulator: helpers: Ensure bypass register field matches ON value") Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-04Merge branch 'topic/error' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into regulator-fixed
2016-11-04regulator: core: Add new API to poll for error conditionsAxel Haslam
Regulator consumers can receive event notifications when errors are reported to the driver, but currently, there is no way for a regulator consumer to know when the error is over. To allow a regulator consumer to poll for error conditions add a new API: regulator_get_error_flags. Signed-off-by: Axel Haslam <ahaslam@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28regulator: core: silence warning: "VDD1: ramp_delay not set"H. Nikolaus Schaller
commit 73e705bf81ce ("regulator: core: Add set_voltage_time op") introduced a new rdev_warn() if the ramp_delay is 0. Apparently, on omap3/twl4030 platforms with dynamic voltage management this results in non-ending spurious messages like [ 511.143066] VDD1: ramp_delay not set [ 511.662322] VDD1: ramp_delay not set [ 513.903625] VDD1: ramp_delay not set [ 514.222198] VDD1: ramp_delay not set [ 517.062835] VDD1: ramp_delay not set [ 517.382568] VDD1: ramp_delay not set [ 520.142791] VDD1: ramp_delay not set [ 520.502593] VDD1: ramp_delay not set [ 523.062896] VDD1: ramp_delay not set [ 523.362701] VDD1: ramp_delay not set [ 526.143035] VDD1: ramp_delay not set I have observed this on GTA04 while it is reported to occur on N900 as well: https://bugzilla.kernel.org/show_bug.cgi?id=178371 This patch makes the warning appear only in debugging mode. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26regulator: tps65218: Remove all the compatiblesKeerthy
Remove all the individual compatibles for all the regulators and introduce id_table and update the driver accordingly to parse device tree nodes using the regulator framework. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-26mfd: tps65218: Remove redundant read wrapperKeerthy
Currently read directly calls the repmap read function. Hence remove the redundant wrapper and use regmap read wherever needed. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-24regulator: rk808: Use rdev_get_id() to access id of regulatorAxel Lin
RK808_ID_DCDC1 is 0, no need to do subtract RK808_ID_DCDC1. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-24regulator: tps6507x: Drop pointless static qualifier for *reg_data variableAxel Lin
There is no need to use static for this local variable. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-24regulator: arizona-ldo1: Set appropriate value for ramp_delayCharles Keepax
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-12Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal managament updates from Zhang Rui: - Enhance thermal "userspace" governor to export the reason when a thermal event is triggered and delivered to user space. From Srinivas Pandruvada - Introduce a single TSENS thermal driver for the different versions of the TSENS IP that exist, on different qcom msm/apq SoCs'. Support for msm8916, msm8960, msm8974 and msm8996 families is also added. From Rajendra Nayak - Introduce hardware-tracked trip points support to the device tree thermal sensor framework. The framework supports an arbitrary number of trip points. Whenever the current temperature is changed, the trip points immediately below and above the current temperature are found, driver callback is invoked to program the hardware to get notified when either of the two trip points are triggered. Hardware-tracked trip points support for rockchip thermal driver is also added at the same time. From Sascha Hauer, Caesar Wang - Introduce a new thermal driver, which enables TMU (Thermal Monitor Unit) on QorIQ platform. From Jia Hongtao - Introduce a new thermal driver for Maxim MAX77620. From Laxman Dewangan - Introduce a new thermal driver for Intel platforms using WhiskeyCove PMIC. From Bin Gao - Add mt2701 chip support to MTK thermal driver. From Dawei Chien - Enhance Tegra thermal driver to enable soctherm node and set "critical", "hot" trips, for Tegra124, Tegra132, Tegra210. From Wei Ni - Add resume support for tango thermal driver. From Marc Gonzalez - several small fixes and improvements for rockchip, qcom, imx, rcar, mtk thermal drivers and thermal core code. From Caesar Wang, Keerthy, Rocky Hao, Wei Yongjun, Peter Robinson, Bui Duc Phuc, Axel Lin, Hugh Kang * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (48 commits) thermal: int3403: Process trip change notification thermal: int340x: New Interface to read trip and notify thermal: user_space gov: Add additional information in uevent thermal: Enhance thermal_zone_device_update for events arm64: tegra: set hot trips for Tegra210 arm64: tegra: set critical trips for Tegra210 arm64: tegra: add soctherm node for Tegra210 arm64: tegra: set hot trips for Tegra132 arm64: tegra: set critical trips for Tegra132 arm64: tegra: use tegra132-soctherm for Tegra132 arm: tegra: set hot trips for Tegra124 arm: tegra: set critical trips for Tegra124 thermal: tegra: add hw-throttle for Tegra132 thermal: tegra: add hw-throttle function of: Add bindings of hw throttle for Tegra soctherm thermal: mtk_thermal: Check return value of devm_thermal_zone_of_sensor_register thermal: Add Mediatek thermal driver for mt2701. dt-bindings: thermal: Add binding document for Mediatek thermal controller thermal: max77620: Add thermal driver for reporting junction temp thermal: max77620: Add DT binding doc for thermal driver ...
2016-10-07Merge tag 'mfd-for-linus-4.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core framework: - Add the MFD bindings doc to MAINTAINERS New drivers: - X-Powers AC100 Audio CODEC and RTC - TI LP873x PMIC - Rockchip RK808 PMIC - Samsung Exynos Low Power Audio New device support: - Add support for STMPE1600 variant to stmpe - Add support for PM8018 PMIC to pm8921-core - Add support for AXP806 PMIC in axp20x - Add support for AXP209 GPIO in axp20x New functionality: - Add support for Reset to all STMPE variants - Add support for MKBP event support to cros_ec - Add support for USB to intel_soc_pmic_bxtwc - Add support for IRQs and Power Button to tps65217 Fix-ups: - Clean-up defunct author emails (da9063, max14577) - Kconfig fixups (wm8350-i2c, as37220 - Constify (altera-a10sr, sm501) - Supply PCI IDs (intel-lpss-pci) - Improve clocking (qcom_rpm) - Fix IRQ probing (ucb1x00-core) - Ensure fault log is cleared (da9052) - Remove NO_IRQ check (ucb1x00-core) - Supply I2C properties (intel-lpss-acpi, intel-lpss-pci) - Non standard declaration (tps65217, max8997-irq) - Remove unused code (lp873x, db8500-prcmu, ab8500-debugfs, cros_ec_spi) - Make non-modular (altera-a10sr, intel_msic, smsc-ece1099, sun6i-prcm, twl-core) - OF bindings (ac100, stmpe, qcom-pm8xxx, qcom-rpm, rk808, axp20x, lp873x, exynos5433-lpass, act8945a, aspeed-scu, twl6040, arizona) Bugfixes: - Release OF pointer (qcom_rpm) - Avoid double shifting in suspend/resume (88pm80x) - Fix 'defined but not used' error (exynos-lpass) - Fix 'sleeping whilst attomic' (atmel-hlcdc)" * tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits) mfd: arizona: Handle probe deferral for reset GPIO mfd: arizona: Remove arizona_of_get_named_gpio helper function mfd: arizona: Add DT options for max_channels_clocked and PDM speaker config mfd: twl6040: Register child device for twl6040-pdmclk mfd: cros_ec_spi: Remove unused variable 'request' mfd: omap-usb-host: Return value is not 'const int' mfd: ab8500-debugfs: Remove 'weak' function suspend_test_wake_cause_interrupt_is_mine() mfd: ab8500-debugfs: Remove ab8500_dump_all_banks_to_mem() mfd: db8500-prcmu: Remove unused *prcmu_set_ddr_opp() calls mfd: ab8500-debugfs: Prevent initialised field from being over-written mfd: max8997-irq: 'inline' should be at the beginning of the declaration mfd: rk808: Fix RK818_IRQ_DISCHG_ILIM initializer mfd: tps65217: Fix nonstandard declaration mfd: lp873x: Remove unused mutex lock from struct lp873x mfd: atmel-hlcdc: Do not sleep in atomic context mfd: exynos-lpass: Mark PM functions as __maybe_unused mfd: intel-lpss: Add default I2C device properties for Apollo Lake mfd: twl-core: Make it explicitly non-modular mfd: sun6i-prcm: Make it explicitly non-modular mfd: smsc-ece1099: Make it explicitly non-modular ...
2016-10-05Merge tag 'gpio-v4.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.9 series: Subsystem improvements: - do away with the last users of the obsolete Kconfig options ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter always sounded like an item on a wishlist to Santa Claus to me). We can now select GPIOLIB and be done with it, for all archs. After some struggle it even work on UM. Not that it has GPIO, but if it wants to, it can select the library. - continued efforts to make drivers properly either tristate or bool. - introduce a warning for drivers assigning default triggers to their irqchip lines when probed from device tree, so we find and fix these ambigous drivers. It is agreed that in the OF config path, the device tree defines trigger characteristics. - the same warning, mutatis mutandis, for ACPI-probed GPIO irqchips. - we introduce the ability to mark certain IRQ lines as "unusable" as they can be taken by BIOS/firmware, unrouted in silicon and generally nasty if you use them, and such things. This is put to good use in the STMPE driver and also in the Cherryview pin control driver. - a new "mockup" virtual GPIO device that can be used for testing. The plan is to add unit tests under tools/* for exercising this device and verify that the kernel code paths are working as they should. - make memory-mapped I/O-drivers depend on HAS_IOMEM. This was implicit all the time, but when people started building UM with allyesconfig or allmodconfig it exploded in their face. - move some stray bits of device tree and ACPI HW description callbacks down into their respective implementation silo. These were causing issues when compiling on !HAS_IOMEM as well, so now eventually UM compiles the GPIOLIB library if it wants to. New drivers: - new driver for the Aspeed GPIO front-end companion to the pin controller merged through the pin control tree. - new driver for the LP873x PMIC GPIO portions. - new driver for Technologic Systems' I2C FPGA GPIO such as TS4900, TS-7970, TS-7990 and TS-4100. - new driver for the Broadcom BCM63xx series including BCM6338 and BCM6345. - new driver for the Intel WhiskeyCove PMIC GPIO. - new driver for the Allwinner AXP209 PMIC GPIO portions. - new driver for Diamond Systems 48 line GPIO-MM, another of these port-mapped I/O expansion cards. - support the STMicroelectronics STMPE1600 variant in the STMPE driver. Driver improvements: - the STMPE driver now supports rising/falling edge detection properly for IRQs. - the PCA954x will now fetch and enable its VCC regulator properly. - major rework of the PCA953x driver with the goal of eventually switching it over to use regmap and thus modernize it even more. - switch the IOP driver to use the generic MMIO GPIO library. - move the ages old HTC EGPIO (extended GPIO) GPIO expander driver over to this subsystem from MFD, achieveing some separation of concerns" * tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (81 commits) gpio: add missing static inline gpio: OF: localize some gpiochip init functions gpio: acpi: separation of concerns gpio: OF: separation of concerns gpio: make memory-mapped drivers depend on HAS_IOMEM gpio: stmpe: use BIT() macro gpio: stmpe: forbid unused lines to be mapped as IRQs mfd/gpio: Move HTC GPIO driver to GPIO subsystem gpio: MAINTAINERS: Add an entry for GPIO mockup driver gpio/mockup: add virtual gpio device gpio: Added zynq specific check for special pins on bank zero gpio: axp209: Implement get_direction gpio: aspeed: remove redundant return value check gpio: loongson1: remove redundant return value check ARM: omap2: fix missing include gpio: tc3589x: fix up complaints on unsigned gpio: tc3589x: add .get_direction() and small cleanup gpio: f7188x: use gpiochip_get_data instead of container_of gpio: tps65218: use devm_gpiochip_add_data() for gpio registration gpio: aspeed: fix return value check in aspeed_gpio_probe() ...
2016-10-04Merge branches 'ib-mfd-gpio-4.9', 'ib-mfd-gpio-regulator-4.9', ↵Lee Jones
'ib-mfd-input-4.9', 'ib-mfd-regulator-4.9', 'ib-mfd-regulator-4.9.1', 'ib-mfd-regulator-rtc-4.9', 'ib-mfd-regulator-rtc-4.9-1' and 'ib-mfd-rtc-4.9' into ibs-for-mfd-merged
2016-09-30Merge remote-tracking branch 'regulator/topic/tps80031' into regulator-nextMark Brown
2016-09-30Merge remote-tracking branches 'regulator/topic/of', ↵Mark Brown
'regulator/topic/pv88080', 'regulator/topic/rk808', 'regulator/topic/set-voltage' and 'regulator/topic/tps65218' into regulator-next
2016-09-30Merge remote-tracking branches 'regulator/topic/bulk', ↵Mark Brown
'regulator/topic/dbx500', 'regulator/topic/hi6421', 'regulator/topic/load' and 'regulator/topic/ltc3676' into regulator-next
2016-09-30Merge remote-tracking branch 'regulator/fix/tps65910' into regulator-linusMark Brown
2016-09-27thermal: Enhance thermal_zone_device_update for eventsSrinivas Pandruvada
Added one additional parameter to thermal_zone_device_update() to provide caller with an optional capability to specify reason. Currently this event is used by user space governor to trigger different processing based on event code. Also it saves an additional call to read temperature when the event is received. The following events are cuurently defined: - Unspecified event - New temperature sample - Trip point violated - Trip point changed - thermal device up and down - thermal device power capability changed Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-26regulator: dbx500: remove unused functions in dbx500-prcmu.cBaoyou Xie
We get 2 warnings when building kernel with W=1: drivers/regulator/dbx500-prcmu.c:78:6: warning: no previous prototype for 'ux500_regulator_suspend_debug' [-Wmissing-prototypes] drivers/regulator/dbx500-prcmu.c:87:6: warning: no previous prototype for 'ux500_regulator_resume_debug' [-Wmissing-prototypes] In fact, these functions are unused in dbx500-prcmu.c, but should be removed. So this patch removes the unused functions. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-26regulator: pv88080: Update regulator for PV88080 BB silicon supportEric Jeong
Three files are modified, the driver, header file and the binding document. Updates for the regulator source file include and .of_match_table entry and node match checking in the probe() function for a compatible pv88080 silicon type. A new "HVBUCK" is added in source file and added regsiter definition in header file for pv88080 bb silicion. The binding documentation changes have been made to reflect these updates. Signed-off-by: Eric Jeong <eric.jeong.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-24regulator: core: don't return error with inadequate reasonJoonwoo Park
drms_uA_update() always returns failure when it cannot find regulator's input voltage. But if hardware supports load configuration with ops->set_load() and the input regulator isn't specified with valid reason such as the input regulator is battery, not finding input voltage is normal so such case should not return with an error. Avoid such inadequate error return by checking input/output voltages only when drms_uA_update() is about to configure load with enum based ops->set_mode(). Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-24regulator: tps65910: Work around silicon erratum SWCZ010Jan Remmet
http://www.ti.com/lit/pdf/SWCZ010: DCDC o/p voltage can go higher than programmed value Impact: VDDI, VDD2, and VIO output programmed voltage level can go higher than expected or crash, when coming out of PFM to PWM mode or using DVFS. Description: When DCDC CLK SYNC bits are 11/01: * VIO 3-MHz oscillator is the source clock of the digital core and input clock of VDD1 and VDD2 * Turn-on of VDD1 and VDD2 HSD PFETis synchronized or at a constant phase shift * Current pulled though VCC1+VCC2 is Iload(VDD1) + Iload(VDD2) * The 3 HSD PFET will be turned-on at the same time, causing the highest possible switching noise on the application. This noise level depends on the layout, the VBAT level, and the load current. The noise level increases with improper layout. When DCDC CLK SYNC bits are 00: * VIO 3-MHz oscillator is the source clock of digital core * VDD1 and VDD2 are running on their own 3-MHz oscillator * Current pulled though VCC1+VCC2 average of Iload(VDD1) + Iload(VDD2) * The switching noise of the 3 SMPS will be randomly spread over time, causing lower overall switching noise. Workaround: Set DCDCCTRL_REG[1:0]= 00. Signed-off-by: Jan Remmet <j.remmet@phytec.de> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2016-09-16regulator: core: Add set_voltage_time opMatthias Kaehlcke
The new op is analogous to set_voltage_time_sel. It can be used by regulators which don't have a table of discrete voltages. The function returns the time for the regulator output voltage to stabilize after being set to a new value, in microseconds. If the op is not set a default implementation is used to calculate the delay. This change also removes the ramp_delay calculation in the PWM regulator, since the driver now uses the core code for the calculation of the delay. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-16regulator: core: Don't skip set_voltage_time when ramp delay disabledMatthias Kaehlcke
The current code assumes that only the ramp_delay is used to determine the time needed for the voltage to stabilize. This may be true for the calculation done by regulator_set_voltage_time_sel(), however regulators can implement their own set_voltage_time_sel() op which would be skipped if no ramp delay is specified. Remove the check in _regulator_do_set_voltage(), the functions calculating the ramp delay return 0 anyway when the ramp delay is not configured. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-16regulator: core: Simplify error flow in _regulator_do_set_voltage()Matthias Kaehlcke
If the voltage can not be set jump to the end of the function. This avoids having to check for an error multiple times and eliminates one level of nesting in a follow-up change. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>