summaryrefslogtreecommitdiff
path: root/drivers/video/omap2/dss/dsi.c
AgeCommit message (Expand)Author
2010-08-05OMAP: DSS2: Fix error path in omap_dsi_update()Archit Taneja
2010-08-05OMAP: DSS2: DSI: detect unsupported update requestsTomi Valkeinen
2010-08-05OMAP: DSS2: DSI: increase FIFO low thresholdTomi Valkeinen
2010-08-05OMAP: DSS2: DSI: Add error IRQ mask for DSI complexIOTomi Valkeinen
2010-08-05OMAP: DSS2: DSI: Remove BTA after set_max_rx_packet_sizeTomi Valkeinen
2010-08-05OMAP: DSS2: change manual update scaling setupTomi Valkeinen
2010-08-05OMAP: DSS2: DSI: use BTA to end the frame transferTomi Valkeinen
2010-08-05OMAP: DSS2: DSI: change dsi_vc_config_l4/vp()Tomi Valkeinen
2010-08-05OMAP: DSS2: DSI: Disable interface when disabling the displayVille Syrjälä
2010-08-05OMAP: DSS2: DSI: Wait for DSI PLL clocks to be active before selecting themTomi Valkeinen
2010-08-05OMAP: DSS2: DSI: Print an error message if DSI clock calc failsVille Syrjälä
2010-08-05OMAP: DSS2: DSI: Disable PCKFREE on errorVille Syrjälä
2010-08-03OMAP: DSS2: DSI: change DSI timeout functionsTomi Valkeinen
2010-08-03OMAP: DSS2: DSI: handle error in synchronous writeTomi Valkeinen
2010-08-03OMAP: DSS2: DSI: change dsi_vc_dcs_read_2 parametersTomi Valkeinen
2010-08-03OMAP: DSS2: DSI: use a private workqueueTomi Valkeinen
2010-08-03OMAP: DSS2: DSI: print errors in dsi_vc_flush_receive_data()Tomi Valkeinen
2010-08-03OMAP: DSS2: DSI: Increase HS TX timeoutTomi Valkeinen
2010-02-26OMAP: DSS2: DSI: add error printsTomi Valkeinen
2010-02-25OMAP: DSS2: DSI: add dsi_vc_dcs_read_2() helperTomi Valkeinen
2010-02-24OMAP: DSS2: DSI: remove external TE supportTomi Valkeinen
2010-02-24OMAP: DSS2: move enable/disable/suspend/resumeTomi Valkeinen
2010-02-24OMAP: DSS2: move update() and sync()Tomi Valkeinen
2010-02-24OMAP: DSS2: move set/get_update_mode()Tomi Valkeinen
2010-02-24OMAP: DSS2: move enable/get_te()Tomi Valkeinen
2010-02-24OMAP: DSS2: move get_resolution()Tomi Valkeinen
2010-02-24OMAP: DSS2: move enable/disable_channel to overlay managerTomi Valkeinen
2010-02-24OMAP: DSS2: move get/set_rotate()Tomi Valkeinen
2010-02-24OMAP: DSS2: move set/get_mirror()Tomi Valkeinen
2010-02-24OMAP: DSS2: move memory_read()Tomi Valkeinen
2010-02-24OMAP: DSS2: move run_test()Tomi Valkeinen
2010-02-24OMAP: DSS2: DSI: remove auto-update perf measurementTomi Valkeinen
2010-02-24OMAP: DSS2: DSI: change DSI bus_lock to semaphoreTomi Valkeinen
2010-02-23OMAP: DSS2: fix get_dsi/dispc_clk_source() usageTomi Valkeinen
2010-02-15OMAP: DSS2: DSI: remove dsi_vc_print_status()Tomi Valkeinen
2010-02-15OMAP: DSS2: DSI: configure all DSI VCsTomi Valkeinen
2010-02-15OMAP: DSS2: DSI: export dsi_vc_enable_hs()Tomi Valkeinen
2010-02-15OMAP: DSS2: DSI: add helpers for DCS read/writeTomi Valkeinen
2010-02-15OMAP: DSS2: DSI: add dsi_bus_is_locked()Tomi Valkeinen
2010-02-15OMAP: DSS2: improve DSS clk src selectionTomi Valkeinen
2010-02-12OMAP: DSS2: enable VDDS_DSI when using DPITomi Valkeinen
2010-01-11OMAP: DSS2: Make check-delay-loops consistentTomi Valkeinen
2010-01-08OMAP: DSS2: Fix crash when panel doesn't define enable_te()Tomi Valkeinen
2010-01-08OMAP: DSS2: Collect interrupt statisticsTomi Valkeinen
2010-01-08OMAP: DSS2: DSI: print debug DCS cmd in hexTomi Valkeinen
2010-01-08OMAP: DSS2: DSI: fix VC channels in send_short and send_nullTomi Valkeinen
2009-12-09OMAP: DSS2: DSI driverTomi Valkeinen