summaryrefslogtreecommitdiff
path: root/include/linux/libata.h
AgeCommit message (Collapse)Author
2024-05-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas). The major update (which causes a conflict with block, see below) is Christoph removing the queue limits and their associated block helpers. The remaining patches are assorted minor fixes and deprecated function updates plus a bit of constification" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits) scsi: mpi3mr: Sanitise num_phys scsi: lpfc: Copyright updates for 14.4.0.2 patches scsi: lpfc: Update lpfc version to 14.4.0.2 scsi: lpfc: Add support for 32 byte CDBs scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading scsi: lpfc: Update logging of protection type for T10 DIF I/O scsi: lpfc: Change default logging level for unsolicited CT MIB commands scsi: target: Remove unused list 'device_list' scsi: iscsi: Remove unused list 'connlist_err' scsi: ufs: exynos: Add support for Tensor gs101 SoC scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata scsi: ufs: exynos: Allow max frequencies up to 267Mhz scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option scsi: ufs: dt-bindings: exynos: Add gs101 compatible scsi: qla2xxx: Fix debugfs output for fw_resource_count scsi: qedf: Ensure the copied buf is NUL terminated scsi: bfa: Ensure the copied buf is NUL terminated ...
2024-04-11scsi: libata: Switch to using ->device_configureChristoph Hellwig
Switch to the ->device_configure method instead of ->slave_configure and update the block limits on the passed in queue_limits instead of using the per-limit accessors. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20240409143748.980206-21-hch@lst.de Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-25scsi: ata: libata-sata: Factor out NCQ Priority configuration helpersIgor Pylypiv
Export libata NCQ Priority configuration helpers to be reused for libsas managed SATA devices. Switched locking from spin_lock_irq() to spin_lock_irqsave(). In the future someone might call these helper functions when interrupts are disabled. spin_unlock_irq() could lead to a premature re-enabling of interrupts, whereas spin_unlock_irqrestore() restores the interrupt state to its condition prior to the spin_lock_irqsave() call. Acked-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Link: https://lore.kernel.org/r/20240307214418.3812290-2-ipylypiv@google.com Reviewed-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-25scsi: sd: Fix TCG OPAL unlock on system resumeDamien Le Moal
Commit 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management") introduced the manage_system_start_stop scsi_device flag to allow libata to indicate to the SCSI disk driver that nothing should be done when resuming a disk on system resume. This change turned the execution of sd_resume() into a no-op for ATA devices on system resume. While this solved deadlock issues during device resume, this change also wrongly removed the execution of opal_unlock_from_suspend(). As a result, devices with TCG OPAL locking enabled remain locked and inaccessible after a system resume from sleep. To fix this issue, introduce the SCSI driver resume method and implement it with the sd_resume() function calling opal_unlock_from_suspend(). The former sd_resume() function is renamed to sd_resume_common() and modified to call the new sd_resume() function. For non-ATA devices, this result in no functional changes. In order for libata to explicitly execute sd_resume() when a device is resumed during system restart, the function scsi_resume_device() is introduced. libata calls this function from the revalidation work executed on devie resume, a state that is indicated with the new device flag ATA_DFLAG_RESUMING. Doing so, locked TCG OPAL enabled devices are unlocked on resume, allowing normal operation. Fixes: 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management") Link: https://bugzilla.kernel.org/show_bug.cgi?id=218538 Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20240319071209.1179257-1-dlemoal@kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-22ata: libata-sata: improve sysfs description for ATA_LPM_UNKNOWNNiklas Cassel
Currently, both ATA_LPM_UNKNOWN (0) and ATA_LPM_MAX_POWER (1) displays as "max_performance" in sysfs. This is quite misleading as they are not the same. For ATA_LPM_UNKNOWN, ata_eh_set_lpm() will not be called at all, leaving the configuration in unknown state. For ATA_LPM_MAX_POWER, ata_eh_set_lpm() is called, and setting the policy to ATA_LPM_MAX_POWER. This also matches the description of the SATA_MOBILE_LPM_POLICY Kconfig: 0 => Keep firmware settings 1 => Maximum performance Thus, update the sysfs description for ATA_LPM_UNKNOWN to match reality. While at it, update libata.h to mention that the ascii descriptions are in libata-sata.c and not in libata-scsi.c. Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Niklas Cassel <cassel@kernel.org>
2023-10-03ata: libata: Cleanup inline DMA helper functionsDamien Le Moal
Simplify the inline DMA helper functions ata_using_mwdma(), ata_using_udma() and ata_dma_enabled() to directly return as a boolean the result of their test condition. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-10-03ata: libata: Annotate struct ata_cpr_log with __counted_byKees Cook
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct ata_cpr_log. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Damien Le Moal <dlemoal@kernel.org> Cc: linux-ide@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-10-03ata: ahci: print the lpm policy on bootNiklas Cassel
The target LPM policy can be set using either a Kconfig or a kernel module parameter. However, if the board type is set to anything but board_ahci_low_power, then the LPM policy will overridden and set to ATA_LPM_UNKNOWN. Additionally, if the default suspend is suspend to idle, depending on the hardware capabilities of the HBA, ahci_update_initial_lpm_policy() might override the LPM policy to either ATA_LPM_MIN_POWER_WITH_PARTIAL or ATA_LPM_MIN_POWER. All this means that it is very hard to know which LPM policy a user will actually be using on a given system. In order to make it easier to debug LPM related issues, print the LPM policy on boot. One common LPM related issue is that the device fails to link up. Because of that, we cannot add this print to ata_dev_configure(), as that function is only called after a successful link up. Instead, add the info using ata_port_desc(), with the help of a new ata_port_desc_misc() helper. The port description is printed once per port during boot. Before changes: ata1: SATA max UDMA/133 abar m524288@0xa5780000 port 0xa5780100 irq 170 ata2: SATA max UDMA/133 abar m524288@0xa5780000 port 0xa5780180 irq 170 After changes: ata1: SATA max UDMA/133 abar m524288@0xa5780000 port 0xa5780100 irq 170 lpm-pol 4 ata2: SATA max UDMA/133 abar m524288@0xa5780000 port 0xa5780180 irq 170 lpm-pol 4 Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-09-28ata: libata-scsi: Disable scsi device manage_system_start_stopDamien Le Moal
The introduction of a device link to create a consumer/supplier relationship between the scsi device of an ATA device and the ATA port of that ATA device fixes the ordering of system suspend and resume operations. For suspend, the scsi device is suspended first and the ata port after it. This is fine as this allows the synchronize cache and START STOP UNIT commands issued by the scsi disk driver to be executed before the ata port is disabled. For resume operations, the ata port is resumed first, followed by the scsi device. This allows having the request queue of the scsi device to be unfrozen after the ata port resume is scheduled in EH, thus avoiding to see new requests prematurely issued to the ATA device. Since libata sets manage_system_start_stop to 1, the scsi disk resume operation also results in issuing a START STOP UNIT command to the device being resumed so that the device exits standby power mode. However, restoring the ATA device to the active power mode must be synchronized with libata EH processing of the port resume operation to avoid either 1) seeing the start stop unit command being received too early when the port is not yet resumed and ready to accept commands, or after the port resume process issues commands such as IDENTIFY to revalidate the device. In this last case, the risk is that the device revalidation fails with timeout errors as the drive is still spun down. Commit 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume") disabled issuing the START STOP UNIT command to avoid issues with it. But this is incorrect as transitioning a device to the active power mode from the standby power mode set on suspend requires a media access command. The IDENTIFY, READ LOG and SET FEATURES commands executed in libata EH context triggered by the ata port resume operation may thus fail. Fix these synchronization issues is by handling a device power mode transitions for system suspend and resume directly in libata EH context, without relying on the scsi disk driver management triggered with the manage_system_start_stop flag. To do this, the following libata helper functions are introduced: 1) ata_dev_power_set_standby(): This function issues a STANDBY IMMEDIATE command to transitiom a device to the standby power mode. For HDDs, this spins down the disks. This function applies only to ATA and ZAC devices and does nothing otherwise. This function also does nothing for devices that have the ATA_FLAG_NO_POWEROFF_SPINDOWN or ATA_FLAG_NO_HIBERNATE_SPINDOWN flag set. For suspend, call ata_dev_power_set_standby() in ata_eh_handle_port_suspend() before the port is disabled and frozen. ata_eh_unload() is also modified to transition all enabled devices to the standby power mode when the system is shutdown or devices removed. 2) ata_dev_power_set_active() and This function applies to ATA or ZAC devices and issues a VERIFY command for 1 sector at LBA 0 to transition the device to the active power mode. For HDDs, since this function will complete only once the disk spin up. Its execution uses the same timeouts as for reset, to give the drive enough time to complete spinup without triggering a command timeout. For resume, call ata_dev_power_set_active() in ata_eh_revalidate_and_attach() after the port has been enabled and before any other command is issued to the device. With these changes, the manage_system_start_stop and no_start_on_resume scsi device flags do not need to be set in ata_scsi_dev_config(). The flag manage_runtime_start_stop is still set to allow the sd driver to spinup/spindown a disk through the sd runtime operations. Fixes: 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-28ata: libata-scsi: link ata port and scsi deviceDamien Le Moal
There is no direct device ancestry defined between an ata_device and its scsi device which prevents the power management code from correctly ordering suspend and resume operations. Create such ancestry with the ata device as the parent to ensure that the scsi device (child) is suspended before the ata device and that resume handles the ata device before the scsi device. The parent-child (supplier-consumer) relationship is established between the ata_port (parent) and the scsi device (child) with the function device_add_link(). The parent used is not the ata_device as the PM operations are defined per port and the status of all devices connected through that port is controlled from the port operations. The device link is established with the new function ata_scsi_slave_alloc(), and this function is used to define the ->slave_alloc callback of the scsi host template of all ata drivers. Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: John Garry <john.g.garry@oracle.com>
2023-09-25ata: libata-sata: increase PMP SRST timeout to 10sMatthias Schiffer
On certain SATA controllers, softreset fails after wakeup from S2RAM with the message "softreset failed (1st FIS failed)", sometimes resulting in drives not being detected again. With the increased timeout, this issue is avoided. Instead, "softreset failed (device not ready)" is now logged 1-2 times; this later failure seems to cause fewer problems however, and the drives are detected reliably once they've spun up and the probe is retried. The issue was observed with the primary SATA controller of the QNAP TS-453B, which is an "Intel Corporation Celeron/Pentium Silver Processor SATA Controller [8086:31e3] (rev 06)" integrated in the Celeron J4125 CPU, and the following drives: - Seagate IronWolf ST12000VN0008 - Seagate IronWolf ST8000NE0004 The SATA controller seems to be more relevant to this issue than the drives, as the same drives are always detected reliably on the secondary SATA controller on the same board (an ASMedia 106x) without any "softreset failed" errors even without the increased timeout. Fixes: e7d3ef13d52a ("libata: change drive ready wait after hard reset to 5s") Cc: stable@vger.kernel.org Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-09-11ata: libata: disallow dev-initiated LPM transitions to unsupported statesNiklas Cassel
In AHCI 1.3.1, the register description for CAP.SSC: "When cleared to ‘0’, software must not allow the HBA to initiate transitions to the Slumber state via agressive link power management nor the PxCMD.ICC field in each port, and the PxSCTL.IPM field in each port must be programmed to disallow device initiated Slumber requests." In AHCI 1.3.1, the register description for CAP.PSC: "When cleared to ‘0’, software must not allow the HBA to initiate transitions to the Partial state via agressive link power management nor the PxCMD.ICC field in each port, and the PxSCTL.IPM field in each port must be programmed to disallow device initiated Partial requests." Ensure that we always set the corresponding bits in PxSCTL.IPM, such that a device is not allowed to initiate transitions to power states which are unsupported by the HBA. DevSleep is always initiated by the HBA, however, for completeness, set the corresponding bit in PxSCTL.IPM such that agressive link power management cannot transition to DevSleep if DevSleep is not supported. sata_link_scr_lpm() is used by libahci, ata_piix and libata-pmp. However, only libahci has the ability to read the CAP/CAP2 register to see if these features are supported. Therefore, in order to not introduce any regressions on ata_piix or libata-pmp, create flags that indicate that the respective feature is NOT supported. This way, the behavior for ata_piix and libata-pmp should remain unchanged. This change is based on a patch originally submitted by Runa Guo-oc. Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Fixes: 1152b2617a6e ("libata: implement sata_link_scr_lpm() and make ata_dev_set_feature() global") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-08-02ata: libata: remove deprecated EH callbacksNiklas Cassel
Now that all libata drivers have migrated to use the error_handler callback, remove the deprecated phy_reset and eng_timeout callbacks. Also remove references to non-existent functions sata_phy_reset and ata_qc_timeout from Documentation/driver-api/libata.rst. Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-08-02ata: libata-core: remove ata_bus_probe()Niklas Cassel
Remove ata_bus_probe() as it is unused. Also, remove references to ata_bus_probe and port_disable in Documentation/driver-api/libata.rst, as neither exist anymore. Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-08-02ata,scsi: remove ata_sas_port_init()Niklas Cassel
ata_sas_port_init() now only contains a single initialization. Move this single initialization to ata_sas_port_alloc(), since: 1) ata_sas_port_alloc() already initializes some of the struct members. 2) ata_sas_port_alloc() is only used by libsas. Suggested-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-08-02ata,scsi: cleanup __ata_port_probe()Hannes Reinecke
Rename __ata_port_probe() to ata_port_probe() and drop the wrapper ata_sas_async_probe(). Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-08-02ata: libata-sata: remove ata_sas_sync_probe()Hannes Reinecke
Unused. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-08-02ata,scsi: remove ata_sas_port_destroy()Hannes Reinecke
Is now a wrapper around kfree(), so call it directly. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-08-02ata,scsi: remove ata_sas_port_{start,stop} callbacksHannes Reinecke
Callbacks are empty now, so remove them. Also, remove the call to ap->ops->port_start() in ata_sas_port_init(), as this would otherwise cause a NULL pointer dereference, now when the callback is gone. Signed-off-by: Hannes Reinecke <hare@suse.de> [niklas: remove the call to ap->ops->port_start() in ata_sas_port_init()] Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-08-02ata: libata: remove references to non-existing error_handler()Hannes Reinecke
With commit 65a15d6560df ("scsi: ipr: Remove SATA support") all libata drivers now have the error_handler() callback provided, so we can stop checking for non-existing error_handler callback. Signed-off-by: Hannes Reinecke <hare@suse.de> [niklas: fixed review comments, rebased, solved conflicts during rebase, fixed bug that unconditionally dumped all QCs, removed the now unused function ata_dump_status(), removed the now unreachable failure paths in atapi_qc_complete(), removed the non-EH function to request ATAPI sense] Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-08-02ata: fix debounce timings typeSergey Shtylyov
sata_deb_timing_{hotplug|long|normal}[] store 'unsigned long' debounce timeouts in ms, while sata_link_debounce() eventually uses those timeouts by calling ata_{deadline|msleep}( which take just 'unsigned int'. Change the debounce timeout table element's type to 'unsigned int' -- all these timeouts happily fit into 'unsigned int'... Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-08-02ata: libata-core: fix parameter types of ata_wait_register()Sergey Shtylyov
ata_wait_register() passes its 'unsigned long {interval|timeout}' params verbatim to ata_{msleep|deadline}() that just take 'unsigned int' param for the time intervals in ms -- eliminate unneeded implicit casts... Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-08-02ata: libata: fix parameter type of ata_deadline()Sergey Shtylyov
ata_deadline() passes its 'unsigned long timeout_msecs' parameter verbatim to msecs_to_jiffies() which takes just 'unsigned int' -- eliminate unneeded implicit cast... Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-06-30Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi, lpfc, qla2xxx). We have a couple of major core changes impacting other systems: - Command Duration Limits, which spills into block and ATA - block level Persistent Reservation Operations, which touches block, nvme, target and dm Both of these are added with merge commits containing a cover letter explaining what's going on" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits) scsi: core: Improve warning message in scsi_device_block() scsi: core: Replace scsi_target_block() with scsi_block_targets() scsi: core: Don't wait for quiesce in scsi_device_block() scsi: core: Don't wait for quiesce in scsi_stop_queue() scsi: core: Merge scsi_internal_device_block() and device_block() scsi: sg: Increase number of devices scsi: bsg: Increase number of devices scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue scsi: ufs: ufs-pci: Add support for Intel Arrow Lake scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT scsi: ufs: wb: Add explicit flush_threshold sysfs attribute scsi: ufs: ufs-qcom: Switch to the new ICE API scsi: ufs: dt-bindings: qcom: Add ICE phandle scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR scsi: ufs: core: Remove dedicated hwq for dev command scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes ...
2023-06-30Merge tag 'ata-6.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata updates from Damien Le Moal: - Add support for the .remove_new callback to the ata_platform code to simplify device removal interface (Uwe) - Code simplification in ata_dev_revalidate() (Yahu) - Fix code indentation and coding style in the pata_parport protocol modules to avoid warnings from static code analyzers (me) - Clarify ata_eh_qc_retry() behavior with better comments (Niklas) - Simplify and improve ata_change_queue_depth() behavior to have a consistent behavior between libsas managed devices and libata managed devices (e.g. AHCI connected devices) (me) - Cleanup libata-scsi and libata-eh code to use the ata_ncq_enabled() and ata_ncq_supported() helpers instead of open coding flags tests (me) - Cleanup ahci_reset_controller() code (me) - Change the pata_octeon_cf and sata_svw drivers to use of_property_read_reg() to simplify the code (Rob, me) - Remove unnecessary include files from ahci_octeon driver (me) - Modify the DesignWare ahci dt bindings to add support for the Rockchip RK3588 AHCI (Sebastian) * tag 'ata-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (29 commits) dt-bindings: phy: rockchip: rk3588 has two reset lines dt-bindings: ata: dwc-ahci: add Rockchip RK3588 dt-bindings: ata: dwc-ahci: add PHY clocks ata: ahci_octeon: Remove unnecessary include ata: pata_octeon_cf: Add missing header include ata: ahci: Cleanup ahci_reset_controller() ata: Use of_property_read_reg() to parse "reg" ata: libata-scsi: Use ata_ncq_supported in ata_scsi_dev_config() ata: libata-eh: Use ata_ncq_enabled() in ata_eh_speed_down() ata: libata-sata: Improve ata_change_queue_depth() ata: libata-sata: Simplify ata_change_queue_depth() ata: libata-eh: Clarify ata_eh_qc_retry() behavior at call site ata: pata_parport: Fix on26 module code indentation and style ata: pata_parport: Fix on20 module code indentation and style ata: pata_parport: Fix ktti module code indentation and style ata: pata_parport: Fix kbic module code indentation and style ata: pata_parport: Fix friq module code indentation and style ata: pata_parport: Fix fit3 module code indentation and style ata: pata_parport: Fix fit2 module code indentation and style ata: pata_parport: Fix epia module code indentation and style ...
2023-06-18ata: libata-scsi: Avoid deadlock on rescan after device resumeDamien Le Moal
When an ATA port is resumed from sleep, the port is reset and a power management request issued to libata EH to reset the port and rescanning the device(s) attached to the port. Device rescanning is done by scheduling an ata_scsi_dev_rescan() work, which will execute scsi_rescan_device(). However, scsi_rescan_device() takes the generic device lock, which is also taken by dpm_resume() when the SCSI device is resumed as well. If a device rescan execution starts before the completion of the SCSI device resume, the rcu locking used to refresh the cached VPD pages of the device, combined with the generic device locking from scsi_rescan_device() and from dpm_resume() can cause a deadlock. Avoid this situation by changing struct ata_port scsi_rescan_task to be a delayed work instead of a simple work_struct. ata_scsi_dev_rescan() is modified to check if the SCSI device associated with the ATA device that must be rescanned is not suspended. If the SCSI device is still suspended, ata_scsi_dev_rescan() returns early and reschedule itself for execution after an arbitrary delay of 5ms. Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reported-by: Joe Breuer <linux-kernel@jmbreuer.net> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217530 Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Joe Breuer <linux-kernel@jmbreuer.net>
2023-06-05ata: libata-sata: Simplify ata_change_queue_depth()Damien Le Moal
Commit 141f3d6256e5 ("ata: libata-sata: Fix device queue depth control") added a struct ata_device argument to ata_change_queue_depth() to address problems with changing the queue depth of ATA devices managed through libsas. This was due to problems with ata_scsi_find_dev() which are now fixed with commit 7f875850f20a ("ata: libata-scsi: Use correct device no in ata_find_dev()"). Undo some of the changes of commit 141f3d6256e5: remove the added struct ata_device aregument and use again ata_scsi_find_dev() to find the target ATA device structure. While doing this, also make sure that ata_scsi_find_dev() is called with ap->lock held, as it should. libsas and libata call sites of ata_change_queue_depth() are updated to match the modified function arguments. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.g.garry@oracle.com>
2023-05-22scsi: ata: libata: Handle completion of CDL commands using policy 0xDNiklas Cassel
A CDL timeout for policy 0xF is defined as a NCQ error, just with a CDL specific sk/asc/ascq in the sense data. Therefore, the existing code in libata does not need to be modified to handle a policy 0xF CDL timeout. For Command Duration Limits policy 0xD: The device shall complete the command without error with the additional sense code set to DATA CURRENTLY UNAVAILABLE. Since a CDL timeout for policy 0xD is not an error, we cannot use the NCQ Command Error log (10h). Instead, we need to read the Sense Data for Successful NCQ Commands log (0Fh). In the success case, just like in the error case, we cannot simply read a log page from the interrupt handler itself, since reading a log page involves sending a READ LOG DMA EXT or READ LOG EXT command. Therefore, we add a new EH action ATA_EH_GET_SUCCESS_SENSE. When a command completes without error, and when the ATA_SENSE bit is set, this new action is set as pending, and EH is scheduled. This way, similar to the NCQ error case, the log page will be read from EH context. An alternative would have been to add a new kthread or workqueue to handle this. However, extending EH can be done with minimal changes and avoids the need to synchronize a new kthread/workqueue with EH. Co-developed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Link: https://lore.kernel.org/r/20230511011356.227789-20-nks@flawful.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-22scsi: ata: libata: Set read/write commands CDL indexDamien Le Moal
For devices supporting the command duration limits feature, translate the dld field of read and write operation to set the command duration limit index field of the command task file when the duration limit feature is enabled. The function ata_set_tf_cdl() is introduced to do this. For unqueued (non NCQ) read and write operations, this function sets the command duration limit index set as the lower 3 bits of the feature field. For queued NCQ read/write commands, the index is set as the lower 3 bits of the auxiliary field. The flag ATA_QCFLAG_HAS_CDL is introduced to indicate that a command taskfile has a non zero cdl field. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Igor Pylypiv <ipylypiv@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Co-developed-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Link: https://lore.kernel.org/r/20230511011356.227789-19-nks@flawful.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-22scsi: ata: libata: Add ATA feature control sub-page translationDamien Le Moal
Add support for the ATA feature control sub-page of the control mode page to enable/disable the command duration limits feature using the cdl_ctrl field of the ATA feature control sub-page. Both mode sense and mode select translation are supported. For mode sense, the ata device flag ATA_DFLAG_CDL_ENABLED is used to cache the status of the command duration limits feature. Enabling this feature is done using a SET FEATURES command with a cdl action set to 1 when the page cdl_ctrl field value is 0x2 (T2A and T2B pages supported). If this field is 0, CDL is disabled using the SET FEATURES command with a cdl action set to 0. Since a device CDL and NCQ priority features should not be used simultaneously, ata_mselect_control_ata_feature() returns an error when attempting to enable CDL with the device priority feature enabled. Conversely, the function ata_ncq_prio_enable_store() used to enable the use of the device NCQ priority feature through sysfs is modified to return an error if the device CDL feature is enabled. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Co-developed-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Link: https://lore.kernel.org/r/20230511011356.227789-18-nks@flawful.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-22scsi: ata: libata: Detect support for command duration limitsDamien Le Moal
Use the supported capabilities identify device data log page to detect if a device supports the command duration limits feature. For devices supporting this feature, set the device flag ATA_DFLAG_CDL. To support SCSI-ATA translation, retrieve the command duration limits log page 18h and cache this page content using the cdl array added to the ata_device data structure. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Co-developed-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Link: https://lore.kernel.org/r/20230511011356.227789-15-nks@flawful.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-15ata: libata: Make ata_platform_remove_one return voidUwe Kleine-König
The function returned zero unconditionally, so the function returning an int is something between useless and irritating. With the goal to make platform drivers' remove function return void, it's helpful to convert the function accordingly. This converts several drivers to the new .remove_new callback that was introduced to smoothen the platform driver conversion. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-03-24scsi: ata: Declare SCSI host templates constBart Van Assche
Make it explicit that ATA host templates are not modified. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> (for DWC AHCI SATA) Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> (for Tegra) Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: John Garry <john.g.garry@oracle.com> Cc: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230322195515.1267197-5-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-14ata: libata: cleanup fua support detectionDamien Le Moal
Move the detection of a device FUA support from ata_scsiop_mode_sense()/ata_dev_supports_fua() to device scan time in ata_dev_configure(). The function ata_dev_config_fua() is introduced to detect if a device supports FUA and this support is indicated using the new device flag ATA_DFLAG_FUA. In order to blacklist known buggy devices, the horkage flag ATA_HORKAGE_NO_FUA is introduced. Similarly to other horkage flags, the libata.force= arguments "fua" and "nofua" are also introduced to allow a user to control this horkage flag through the "force" libata module parameter. The ATA_DFLAG_FUA device flag is set only and only if all the following conditions are met: * libata.fua module parameter is set to 1 * The device supports the WRITE DMA FUA EXT command, * The device is not marked with the ATA_HORKAGE_NO_FUA flag, either from the blacklist or set by the user with libata.force=nofua * The device supports NCQ (while this is not mandated by the standards, this restriction is introduced to avoid problems with older non-NCQ devices). Enabling or diabling libata FUA support for all devices can now also be done using the "force=[no]fua" module parameter when libata.fua is set to 1. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
2023-01-14ata: libata: Introduce ata_ncq_supported()Damien Le Moal
Introduce the inline helper function ata_ncq_supported() to test if a device supports NCQ commands. The function ata_ncq_enabled() is also rewritten using this new helper function. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
2023-01-04ata: libata: move NCQ related ATA_DFLAGsNiklas Cassel
ata_dev_configure() starts off by clearing all flags in ATA_DFLAG_CFG_MASK: dev->flags &= ~ATA_DFLAG_CFG_MASK; ata_dev_configure() then calls ata_dev_config_lba() which calls ata_dev_config_ncq(). ata_dev_config_ncq() will set the correct ATA_DFLAGs depending on what is actually supported. Since these flags are set by ata_dev_configure(), they should be in ATA_DFLAG_CFG_MASK and not in ATA_DFLAG_INIT_MASK. ATA_DFLAG_NCQ_PRIO_ENABLED is set via sysfs, is should therefore not be in ATA_DFLAG_CFG_MASK. It also cannot be in ATA_DFLAG_INIT_MASK, because ata_eh_schedule_probe() calls ata_dev_init(), which will clear all flags in ATA_DFLAG_INIT_MASK. This means that ATA_DFLAG_NCQ_PRIO_ENABLED (the value the user sets via sysfs) would get silently cleared if ata_eh_schedule_probe() is called. While that should only happen in certain circumstances, it still doesn't seem right that it can get silently cleared. (ata_dev_config_ncq_prio() will still clear the ATA_DFLAG_NCQ_PRIO_ENABLED flag if ATA_DFLAG_NCQ_PRIO is suddenly no longer supported after a revalidation.) Because of this, move ATA_DFLAG_NCQ_PRIO_ENABLED to be outside of both ATA_DFLAG_CFG_MASK and ATA_DFLAG_INIT_MASK. Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2023-01-04ata: libata: read the shared status for successful NCQ commands onceNiklas Cassel
Currently, the status is being read for each QC, inside ata_qc_complete(), which means that QCs being completed by ata_qc_complete_multiple() (i.e. multiple QCs completed during a single interrupt), can have different status and error bits set. This is because the FIS Receive Area will get updated as soon as the HBA receives a new FIS from the device in the NCQ case. Here is an example of the problem: ata14.00: ata_qc_complete_multiple: done_mask: 0x180000 qc tag: 19 cmd: 0x61 flags: 0x11b err_mask: 0x0 tf->status: 0x40 qc tag: 20 cmd: 0x61 flags: 0x11b err_mask: 0x0 tf->status: 0x43 A print in ata_qc_complete_multiple(), shows that done_mask is: 0x180000 which means that tag 19 and 20 were completed. Another print in ata_qc_complete(), after the call to fill_result_tf(), shows that tag 19 and 20 have different status values, even though they were completed in the same ata_qc_complete_multiple() call. If PMP is not enabled, simply read the status and error once, before calling ata_qc_complete() for each QC. Without PMP, we know that all QCs must share the same status and error values. If PMP is enabled, we also read the status before calling ata_qc_complete(), however, we still read the status for each QC, since the QCs can belong to different PMP links (which means that the QCs does not necessarily share the same status and error values). Do all this by introducing the new port operation .qc_ncq_fill_rtf. If set, this operation is called in ata_qc_complete_multiple() to set the result tf for all completed QCs signaled by the last SDB FIS received. QCs that have their result tf filled are marked with the new flag ATA_QCFLAG_RTF_FILLED so that any later execution of the qc_fill_rtf port operation does nothing (e.g. when called from ata_qc_complete()). Co-developed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
2023-01-04ata: libata: simplify qc_fill_rtf port operation interfaceDamien Le Moal
The boolean return value of the qc_fill_rtf operation is used nowhere. Simplify this operation interface by making it a void function. All drivers defining this operation are also updated. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: John Garry <john.g.garry@oracle.com>
2023-01-04ata: scsi: rename flag ATA_QCFLAG_FAILED to ATA_QCFLAG_EHNiklas Cassel
The name ATA_QCFLAG_FAILED is misleading since it does not mean that a QC completed in error, or that it didn't complete at all. It means that libata decided to schedule EH for the QC, so the QC is now owned by the libata error handler (EH). The normal execution path is responsible for not accessing a QC owned by EH. libata core enforces the rule by returning NULL from ata_qc_from_tag() for QCs owned by EH. It is quite easy to mistake that a QC marked with ATA_QCFLAG_FAILED was an error. However, a QC that was actually an error is instead indicated by having qc->err_mask set. E.g. when we have a NCQ error, we abort all QCs, which currently will mark all QCs as ATA_QCFLAG_FAILED. However, it will only be a single QC that is an error (i.e. has qc->err_mask set). Rename ATA_QCFLAG_FAILED to ATA_QCFLAG_EH to more clearly highlight that this flag simply means that a QC is now owned by EH. This new name will not mislead to think that the QC was an error (which is instead indicated by having qc->err_mask set). This also makes it more obvious that the EH code skips all QCs that do not have ATA_QCFLAG_EH set (rather than ATA_QCFLAG_FAILED), since the EH code should simply only care about QCs that are owned by EH itself. Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-11-11ata: libata-sff: kill unused ata_sff_busy_sleep()Sergey Shtylyov
Nobody seems to call ata_sff_busy_sleep(), so we can get rid of it... Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-10-18ata: add ata_port_is_frozen() helperNiklas Cassel
At the request of the libata maintainer, introduce a ata_port_is_frozen() helper function. Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-10-07Merge tag 'ata-6.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata updates from Damien Le Moal: - Print the timeout value for internal command failures due to a timeout (from Tomas) - Improve parameter names in ata_dev_set_feature() to clarify this function use (from Niklas) - Improve the ahci driver low power mode setting initialization to allow more flexibility for the user (from Rafael) - Several patches to remove redundant variables in libata-core, libata-eh and the pata_macio driver and to fix typos in comments (from Jinpeng, Shaomin, Ye) - Some code simplifications and macro renaming (for clarity) in various functions of libata-core (from me) - Add a missing check for a potential failure of sata_scr_read() in sata_print_link_status() (from Li) - Cleanup of libata Kconfig PATA_PLATFORM and PATA_OF_PLATFORM options (from Lukas) - Cleanups of ata dt-bindings and improvements of libahci_platform, ahci and libahci code (from Serge) - New driver for Synopsys AHCI SATA controllers, based of the generic ahci code (from Serge). One compilation warning fix is added for this driver (from me) - Several fixes to macros used to discover a drive capabilities to be consistent with the ACS specifications (from Niklas) - A couple of simplifcations to some libata functions, removing unnecessary arguments (from Niklas) - An improvements to libata-eh code to avoid unnecessary link reset when revalidating a drive after a failed command. In practice, this extra, unneeded reset, reset does not cause any arm beyond slightly slowing down error recovery (from Niklas) * tag 'ata-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (45 commits) ata: libata-eh: avoid needless hard reset when revalidating link ata: libata: drop superfluous ata_eh_analyze_tf() parameter ata: libata: drop superfluous ata_eh_request_sense() parameter ata: fix ata_id_has_dipm() ata: fix ata_id_has_ncq_autosense() ata: fix ata_id_has_devslp() ata: fix ata_id_sense_reporting_enabled() and ata_id_has_sense_reporting() ata: libata-eh: Remove the unneeded result variable ata: ahci_st: Enable compile test ata: ahci_st: Fix compilation warning MAINTAINERS: Add maintainers for DWC AHCI SATA driver ata: ahci-dwc: Add Baikal-T1 AHCI SATA interface support ata: ahci-dwc: Add platform-specific quirks support dt-bindings: ata: ahci: Add Baikal-T1 AHCI SATA controller DT schema ata: ahci: Add DWC AHCI SATA controller support ata: libahci_platform: Add function returning a clock-handle by id dt-bindings: ata: ahci: Add DWC AHCI SATA controller DT schema ata: ahci: Introduce firmware-specific caps initialization ata: ahci: Convert __ahci_port_base to accepting hpriv as arguments ata: libahci: Don't read AHCI version twice in the save-config method ...
2022-09-28ata: libata-sata: Fix device queue depth controlDamien Le Moal
The function __ata_change_queue_depth() uses the helper ata_scsi_find_dev() to get the ata_device structure of a scsi device and set that device maximum queue depth. However, when the ata device is managed by libsas, ata_scsi_find_dev() returns NULL, turning __ata_change_queue_depth() into a nop, which prevents the user from setting the maximum queue depth of ATA devices used with libsas based HBAs. Fix this by renaming __ata_change_queue_depth() to ata_change_queue_depth() and adding a pointer to the ata_device structure of the target device as argument. This pointer is provided by ata_scsi_change_queue_depth() using ata_scsi_find_dev() in the case of a libata managed device and by sas_change_queue_depth() using sas_to_ata_dev() in the case of a libsas managed ata device. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: John Garry <john.garry@huawei.com>
2022-08-26ata: libata: Rename ATA_DFLAG_NCQ_PRIO_ENABLEDamien Le Moal
Rename ATA_DFLAG_NCQ_PRIO_ENABLE to ATA_DFLAG_NCQ_PRIO_ENABLED to match the fact that this flags indicates if NCQ priority use is enabled by the user. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-08-21ata: libata: Set __ATA_BASE_SHT max_sectorsJohn Garry
Commit 0568e6122574 ("ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors") inadvertently capped the max_sectors value for some SATA disks to a value which is lower than we would want. For a device which supports LBA48, we would previously have request queue max_sectors_kb and max_hw_sectors_kb values of 1280 and 32767 respectively. For AHCI controllers, the value chosen for shost max sectors comes from the minimum of the SCSI host default max sectors in SCSI_DEFAULT_MAX_SECTORS (1024) and the shost DMA device mapping limit. This means that we would now set the max_sectors_kb and max_hw_sectors_kb values for a disk which supports LBA48 at 512, ignoring DMA mapping limit. As report by Oliver at [0], this caused a performance regression. Fix by picking a large enough max sectors value for ATA host controllers such that we don't needlessly reduce max_sectors_kb for LBA48 disks. [0] https://lore.kernel.org/linux-ide/YvsGbidf3na5FpGb@xsang-OptiPlex-9020/T/#m22d9fc5ad15af66066dd9fecf3d50f1b1ef11da3 Fixes: 0568e6122574 ("ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors") Reported-by: Oliver Sang <oliver.sang@intel.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-06-20ata: make ata_port::fastdrain_cnt *unsigned int*Sergey Shtylyov
*unsigned long* ata_port::fastdrain_cnt (64-bit value in a 64-bit kernel) is always assigned from the 32-bit *unsigned int* variables, thus could also be made just *unsigned int*... Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-06-17ata: make transfer mode masks *unsigned int*Sergey Shtylyov
The packed transfer mode masks and also the {pio|mwdma|udma}_mask fields of *struct*s ata_device and ata_port_info are declared as *unsigned long* (which is a 64-bit type on 64-bit architectures) but actually the packed masks occupy only 20 bits (7 PIO modes, 5 MWDMA modes, and 8 UDMA modes) and the PIO/MWDMA/UDMA masks easily fit into just 8 bits each, so we can safely use (always 32-bit) *unsigned int* variables instead. This saves 745 bytes of object code in libata-core.o alone, not to mention LLDDs... Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-06-06ata: libata: drop 'sas_last_tag'Hannes Reinecke
Unused now. Fixes: 4f1a22ee7b57 ("libata: Improve ATA queued command allocation") Cc: John Garry <john.garry@huawei.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-04-12ata: libata-core: fix parameter type in ata_xfer_mode2shift()Sergey Shtylyov
The data transfer mode that corresponds to the 'xfer_mode' parameter for ata_xfer_mode2shift() is a 8-bit *unsigned* value. Using *unsigned long* to declare the parameter leads to a problematic implicit *int* to *unsigned long* cast and was most probably a result of a copy/paste mistake -- use the 'u8' type instead, as in ata_xfer_mode2mask()... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-04-11libata: Improve ATA queued command allocationJohn Garry
Improve ATA queued command allocation as follows: - For attaining a qc tag for a SAS host we need to allocate a bit in ata_port.sas_tag_allocated bitmap. However we already have a unique tag per device in range [0, ATA_MAX_QUEUE -1] in the scsi cmnd budget token, so just use that instead. - It is a bit pointless to have ata_qc_new_init() in libata-core.c since it pokes scsi internals, so inline it in ata_scsi_qc_new() (in libata-scsi.c). Also update Doc accordingly. - Use standard SCSI helpers set_host_byte() and set_status_byte() in ata_scsi_qc_new(). Christoph Hellwig originally contributed the change to inline ata_qc_new_init(). Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>