Merge tag 'v3.9-rc3' into drm-intel-next-queued

Backmerge so that I can merge Imre Deak's coalesced sg entries fixes,
which depend upon the new for_each_sg_page introduce in

commit a321e91b6d73ed011ffceed384c40d2785cf723b
Author: Imre Deak <imre.deak@intel.com>
Date:   Wed Feb 27 17:02:56 2013 -0800

    lib/scatterlist: add simple page iterator

The merge itself is just two trivial conflicts:

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

1 files changed, 15 insertions, 38 deletions

diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index c333fa6dffa8..b59d93908341 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -54,7 +54,6 @@
 #include "powerdomain.h"
 #include "clockdomain.h"
 
-static void (*omap2_sram_idle)(void);
 static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
 				  void __iomem *sdrc_power);
 
@@ -90,11 +89,7 @@ static int omap2_enter_full_retention(void)
 	omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
 	omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
 
-	/*
-	 * Set MPU powerdomain's next power state to RETENTION;
-	 * preserve logic state during retention
-	 */
-	pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
+	pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
 	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
 
 	/* Workaround to kill USB */
@@ -137,15 +132,10 @@ no_sleep:
 	/* Mask future PRCM-to-MPU interrupts */
 	omap2_prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
 
-	return 0;
-}
-
-static int omap2_i2c_active(void)
-{
-	u32 l;
+	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
+	pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_ON);
 
-	l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
-	return l & (OMAP2420_EN_I2C2_MASK | OMAP2420_EN_I2C1_MASK);
+	return 0;
 }
 
 static int sti_console_enabled;
@@ -172,10 +162,7 @@ static int omap2_allow_mpu_retention(void)
 
 static void omap2_enter_mpu_retention(void)
 {
-	/* Putting MPU into the WFI state while a transfer is active
-	 * seems to cause the I2C block to timeout. Why? Good question. */
-	if (omap2_i2c_active())
-		return;
+	const int zero = 0;
 
 	/* The peripherals seem not to be able to wake up the MPU when
 	 * it is in retention mode. */
@@ -186,17 +173,17 @@ static void omap2_enter_mpu_retention(void)
 		omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
 
 		/* Try to enter MPU retention */
-		omap2_prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) |
-				  OMAP_LOGICRETSTATE_MASK,
-				  MPU_MOD, OMAP2_PM_PWSTCTRL);
+		pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
+
 	} else {
 		/* Block MPU retention */
-
-		omap2_prm_write_mod_reg(OMAP_LOGICRETSTATE_MASK, MPU_MOD,
-						 OMAP2_PM_PWSTCTRL);
+		pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
 	}
 
-	omap2_sram_idle();
+	/* WFI */
+	asm("mcr p15, 0, %0, c7, c0, 4" : : "r" (zero) : "memory", "cc");
+
+	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
 }
 
 static int omap2_can_sleep(void)
@@ -251,25 +238,17 @@ static void __init prcm_setup_regs(void)
 	for (i = 0; i < num_mem_banks; i++)
 		pwrdm_set_mem_retst(core_pwrdm, i, PWRDM_POWER_RET);
 
-	/* Set CORE powerdomain's next power state to RETENTION */
-	pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
+	pwrdm_set_logic_retst(core_pwrdm, PWRDM_POWER_RET);
 
-	/*
-	 * Set MPU powerdomain's next power state to RETENTION;
-	 * preserve logic state during retention
-	 */
 	pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
-	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
 
 	/* Force-power down DSP, GFX powerdomains */
 
 	pwrdm = clkdm_get_pwrdm(dsp_clkdm);
 	pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
-	clkdm_sleep(dsp_clkdm);
 
 	pwrdm = clkdm_get_pwrdm(gfx_clkdm);
 	pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
-	clkdm_sleep(gfx_clkdm);
 
 	/* Enable hardware-supervised idle for all clkdms */
 	clkdm_for_each(omap_pm_clkdms_setup, NULL);
@@ -356,11 +335,9 @@ int __init omap2_pm_init(void)
 	/*
 	 * We copy the assembler sleep/wakeup routines to SRAM.
 	 * These routines need to be in SRAM as that's the only
-	 * memory the MPU can see when it wakes up.
+	 * memory the MPU can see when it wakes up after the entire
+	 * chip enters idle.
 	 */
-	omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
-					 omap24xx_idle_loop_suspend_sz);
-
 	omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
 					    omap24xx_cpu_suspend_sz);