Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (151 commits)
  vga_switcheroo: disable default y by new rules.
  drm/nouveau: fix *staging* driver build with switcheroo off.
  drm/radeon: fix typo in Makefile
  vga_switcheroo: fix build on platforms with no ACPI
  drm/radeon: Fix printf type warning in 64bit system.
  drm/radeon/kms: bump the KMS version number for square tiling support.
  vga_switcheroo: initial implementation (v15)
  drm/radeon/kms: do not disable audio engine twice
  Revert "drm/radeon/kms: disable HDMI audio for now on rv710/rv730"
  drm/radeon/kms: do not preset audio stuff and start timer when not using audio
  drm/radeon: r100/r200 ums: block ability for userspace app to trash 0 page and beyond
  drm/ttm: fix function prototype to match implementation
  drm/radeon: use ALIGN instead of open coding it
  drm/radeon/kms: initialize set_surface_reg reg for rs600 asic
  drm/i915: Use a dmi quirk to skip a broken SDVO TV output.
  drm/i915: enable/disable LVDS port at DPMS time
  drm/i915: check for multiple write domains in pin_and_relocate
  drm/i915: clean-up i915_gem_flush_gpu_write_domain
  drm/i915: reuse i915_gpu_idle helper
  drm/i915: ensure lru ordering of fence_list
  ...

Fixed trivial conflicts in drivers/gpu/vga/Kconfig

1 files changed, 7 insertions, 7 deletions

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 79dd4026586f..fccf07470c8f 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -39,7 +39,7 @@ static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 temp, reg;
 
-	if (IS_IRONLAKE(dev))
+	if (HAS_PCH_SPLIT(dev))
 		reg = PCH_ADPA;
 	else
 		reg = ADPA;
@@ -113,7 +113,7 @@ static void intel_crt_mode_set(struct drm_encoder *encoder,
 	else
 		dpll_md_reg = DPLL_B_MD;
 
-	if (IS_IRONLAKE(dev))
+	if (HAS_PCH_SPLIT(dev))
 		adpa_reg = PCH_ADPA;
 	else
 		adpa_reg = ADPA;
@@ -122,7 +122,7 @@ static void intel_crt_mode_set(struct drm_encoder *encoder,
 	 * Disable separate mode multiplier used when cloning SDVO to CRT
 	 * XXX this needs to be adjusted when we really are cloning
 	 */
-	if (IS_I965G(dev) && !IS_IRONLAKE(dev)) {
+	if (IS_I965G(dev) && !HAS_PCH_SPLIT(dev)) {
 		dpll_md = I915_READ(dpll_md_reg);
 		I915_WRITE(dpll_md_reg,
 			   dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
@@ -136,11 +136,11 @@ static void intel_crt_mode_set(struct drm_encoder *encoder,
 
 	if (intel_crtc->pipe == 0) {
 		adpa |= ADPA_PIPE_A_SELECT;
-		if (!IS_IRONLAKE(dev))
+		if (!HAS_PCH_SPLIT(dev))
 			I915_WRITE(BCLRPAT_A, 0);
 	} else {
 		adpa |= ADPA_PIPE_B_SELECT;
-		if (!IS_IRONLAKE(dev))
+		if (!HAS_PCH_SPLIT(dev))
 			I915_WRITE(BCLRPAT_B, 0);
 	}
 
@@ -202,7 +202,7 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 	u32 hotplug_en;
 	int i, tries = 0;
 
-	if (IS_IRONLAKE(dev))
+	if (HAS_PCH_SPLIT(dev))
 		return intel_ironlake_crt_detect_hotplug(connector);
 
 	/*
@@ -524,7 +524,7 @@ void intel_crt_init(struct drm_device *dev)
 					  &intel_output->enc);
 
 	/* Set up the DDC bus. */
-	if (IS_IRONLAKE(dev))
+	if (HAS_PCH_SPLIT(dev))
 		i2c_reg = PCH_GPIOA;
 	else {
 		i2c_reg = GPIOA;