Merge tag 'drm-intel-next-2016-03-30' of git://anongit.freedesktop.org/drm-intel into drm-next

- VBT code refactor for a clean split between parsing&using of firmware
  information (Jani)
- untangle the pll computation code, and splitting up the monster
  i9xx_crtc_compute_clocks (Ander)
- dsi support for bxt (Jani, Shashank Sharma and others)
- color manager (i.e. de-gamma, color conversion matrix & gamma support) from
  Lionel Landwerlin
- Vulkan hsw support in the command parser (Jordan Justen)
- large-scale renaming of intel_engine_cs variables/parameters to avoid the epic
  ring vs. engine confusion introduced in gen8 (Tvrtko Ursulin)
- few atomic patches from Maarten&Matt, big one is two-stage wm programming on ilk-bdw
- refactor driver load and add infrastructure to inject load failures for
  testing, from Imre
- various small things all over

* tag 'drm-intel-next-2016-03-30' of git://anongit.freedesktop.org/drm-intel: (179 commits)
  drm/i915: Update DRIVER_DATE to 20160330
  drm/i915: Call intel_dp_mst_resume() before resuming displays
  drm/i915: Fix races on fbdev
  drm/i915: remove unused dev_priv->render_reclock_avail
  drm/i915: move sdvo mappings to vbt data
  drm/i915: move edp low vswing config to vbt data
  drm/i915: use a substruct in vbt data for edp
  drm/i915: replace for_each_engine()
  drm/i915: introduce for_each_engine_id()
  drm/i915/bxt: Fix DSI HW state readout
  drm/i915: Remove vblank wait from hsw_enable_ips, v2.
  drm/i915: Tidy aliasing_gtt_bind_vma()
  drm/i915: Split PNV version of crtc_compute_clock()
  drm/i915: Split g4x_crtc_compute_clock()
  drm/i915: Split i8xx_crtc_compute_clock()
  drm/i915: Split CHV and VLV specific crtc_compute_clock() hooks
  drm/i915: Merge ironlake_compute_clocks() and ironlake_crtc_compute_clock()
  drm/i915: Move fp divisor calculation into ironlake_compute_dpll()
  drm/i915: Pass crtc_state->dpll directly to ->find_dpll()
  drm/i915: Simplify ironlake_crtc_compute_clock() CPU eDP case
  ...

1 files changed, 45 insertions, 144 deletions

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index f069a82deb57..3bdd8ba59b8c 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -671,60 +671,55 @@ intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq)
 	return status;
 }
 
-static uint32_t i9xx_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
+static uint32_t g4x_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 {
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
-	struct drm_device *dev = intel_dig_port->base.base.dev;
+	struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
+
+	if (index)
+		return 0;
 
 	/*
 	 * The clock divider is based off the hrawclk, and would like to run at
-	 * 2MHz.  So, take the hrawclk value and divide by 2 and use that
+	 * 2MHz.  So, take the hrawclk value and divide by 2000 and use that
 	 */
-	return index ? 0 : DIV_ROUND_CLOSEST(intel_hrawclk(dev), 2);
+	return DIV_ROUND_CLOSEST(dev_priv->rawclk_freq, 2000);
 }
 
 static uint32_t ilk_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 {
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
-	struct drm_device *dev = intel_dig_port->base.base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
 
 	if (index)
 		return 0;
 
-	if (intel_dig_port->port == PORT_A) {
+	/*
+	 * The clock divider is based off the cdclk or PCH rawclk, and would
+	 * like to run at 2MHz.  So, take the cdclk or PCH rawclk value and
+	 * divide by 2000 and use that
+	 */
+	if (intel_dig_port->port == PORT_A)
 		return DIV_ROUND_CLOSEST(dev_priv->cdclk_freq, 2000);
-
-	} else {
-		return DIV_ROUND_CLOSEST(intel_pch_rawclk(dev), 2);
-	}
+	else
+		return DIV_ROUND_CLOSEST(dev_priv->rawclk_freq, 2000);
 }
 
 static uint32_t hsw_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 {
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
-	struct drm_device *dev = intel_dig_port->base.base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
 
-	if (intel_dig_port->port == PORT_A) {
-		if (index)
-			return 0;
-		return DIV_ROUND_CLOSEST(dev_priv->cdclk_freq, 2000);
-	} else if (HAS_PCH_LPT_H(dev_priv)) {
+	if (intel_dig_port->port != PORT_A && HAS_PCH_LPT_H(dev_priv)) {
 		/* Workaround for non-ULT HSW */
 		switch (index) {
 		case 0: return 63;
 		case 1: return 72;
 		default: return 0;
 		}
-	} else  {
-		return index ? 0 : DIV_ROUND_CLOSEST(intel_pch_rawclk(dev), 2);
 	}
-}
 
-static uint32_t vlv_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
-{
-	return index ? 0 : 100;
+	return ilk_get_aux_clock_divider(intel_dp, index);
 }
 
 static uint32_t skl_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
@@ -737,10 +732,10 @@ static uint32_t skl_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 	return index ? 0 : 1;
 }
 
-static uint32_t i9xx_get_aux_send_ctl(struct intel_dp *intel_dp,
-				      bool has_aux_irq,
-				      int send_bytes,
-				      uint32_t aux_clock_divider)
+static uint32_t g4x_get_aux_send_ctl(struct intel_dp *intel_dp,
+				     bool has_aux_irq,
+				     int send_bytes,
+				     uint32_t aux_clock_divider)
 {
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
 	struct drm_device *dev = intel_dig_port->base.base.dev;
@@ -1229,71 +1224,6 @@ intel_dp_connector_unregister(struct intel_connector *intel_connector)
 	intel_connector_unregister(intel_connector);
 }
 
-static void
-skl_edp_set_pll_config(struct intel_crtc_state *pipe_config)
-{
-	u32 ctrl1;
-
-	memset(&pipe_config->dpll_hw_state, 0,
-	       sizeof(pipe_config->dpll_hw_state));
-
-	pipe_config->ddi_pll_sel = SKL_DPLL0;
-	pipe_config->dpll_hw_state.cfgcr1 = 0;
-	pipe_config->dpll_hw_state.cfgcr2 = 0;
-
-	ctrl1 = DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
-	switch (pipe_config->port_clock / 2) {
-	case 81000:
-		ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810,
-					      SKL_DPLL0);
-		break;
-	case 135000:
-		ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350,
-					      SKL_DPLL0);
-		break;
-	case 270000:
-		ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700,
-					      SKL_DPLL0);
-		break;
-	case 162000:
-		ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1620,
-					      SKL_DPLL0);
-		break;
-	/* TBD: For DP link rates 2.16 GHz and 4.32 GHz, VCO is 8640 which
-	results in CDCLK change. Need to handle the change of CDCLK by
-	disabling pipes and re-enabling them */
-	case 108000:
-		ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080,
-					      SKL_DPLL0);
-		break;
-	case 216000:
-		ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2160,
-					      SKL_DPLL0);
-		break;
-
-	}
-	pipe_config->dpll_hw_state.ctrl1 = ctrl1;
-}
-
-void
-hsw_dp_set_ddi_pll_sel(struct intel_crtc_state *pipe_config)
-{
-	memset(&pipe_config->dpll_hw_state, 0,
-	       sizeof(pipe_config->dpll_hw_state));
-
-	switch (pipe_config->port_clock / 2) {
-	case 81000:
-		pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_810;
-		break;
-	case 135000:
-		pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_1350;
-		break;
-	case 270000:
-		pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_2700;
-		break;
-	}
-}
-
 static int
 intel_dp_sink_rates(struct intel_dp *intel_dp, const int **sink_rates)
 {
@@ -1570,10 +1500,10 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 
 		/* Get bpp from vbt only for panels that dont have bpp in edid */
 		if (intel_connector->base.display_info.bpc == 0 &&
-			(dev_priv->vbt.edp_bpp && dev_priv->vbt.edp_bpp < bpp)) {
+			(dev_priv->vbt.edp.bpp && dev_priv->vbt.edp.bpp < bpp)) {
 			DRM_DEBUG_KMS("clamping bpp for eDP panel to BIOS-provided %i\n",
-				      dev_priv->vbt.edp_bpp);
-			bpp = dev_priv->vbt.edp_bpp;
+				      dev_priv->vbt.edp.bpp);
+			bpp = dev_priv->vbt.edp.bpp;
 		}
 
 		/*
@@ -1651,13 +1581,7 @@ found:
 				&pipe_config->dp_m2_n2);
 	}
 
-	if ((IS_SKYLAKE(dev)  || IS_KABYLAKE(dev)) && is_edp(intel_dp))
-		skl_edp_set_pll_config(pipe_config);
-	else if (IS_BROXTON(dev))
-		/* handled in ddi */;
-	else if (IS_HASWELL(dev) || IS_BROADWELL(dev))
-		hsw_dp_set_ddi_pll_sel(pipe_config);
-	else
+	if (!HAS_DDI(dev))
 		intel_dp_set_clock(encoder, pipe_config);
 
 	return true;
@@ -1779,11 +1703,11 @@ static void wait_panel_status(struct intel_dp *intel_dp,
 			I915_READ(pp_stat_reg),
 			I915_READ(pp_ctrl_reg));
 
-	if (_wait_for((I915_READ(pp_stat_reg) & mask) == value, 5000, 10)) {
+	if (_wait_for((I915_READ(pp_stat_reg) & mask) == value,
+		      5 * USEC_PER_SEC, 10 * USEC_PER_MSEC))
 		DRM_ERROR("Panel status timeout: status %08x control %08x\n",
 				I915_READ(pp_stat_reg),
 				I915_READ(pp_ctrl_reg));
-	}
 
 	DRM_DEBUG_KMS("Wait complete\n");
 }
@@ -2409,7 +2333,6 @@ static void intel_dp_get_config(struct intel_encoder *encoder,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	enum port port = dp_to_dig_port(intel_dp)->port;
 	struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
-	int dotclock;
 
 	tmp = I915_READ(intel_dp->output_reg);
 
@@ -2459,16 +2382,12 @@ static void intel_dp_get_config(struct intel_encoder *encoder,
 			pipe_config->port_clock = 270000;
 	}
 
-	dotclock = intel_dotclock_calculate(pipe_config->port_clock,
-					    &pipe_config->dp_m_n);
+	pipe_config->base.adjusted_mode.crtc_clock =
+		intel_dotclock_calculate(pipe_config->port_clock,
+					 &pipe_config->dp_m_n);
 
-	if (HAS_PCH_SPLIT(dev_priv->dev) && port != PORT_A)
-		ironlake_check_encoder_dotclock(pipe_config, dotclock);
-
-	pipe_config->base.adjusted_mode.crtc_clock = dotclock;
-
-	if (is_edp(intel_dp) && dev_priv->vbt.edp_bpp &&
-	    pipe_config->pipe_bpp > dev_priv->vbt.edp_bpp) {
+	if (is_edp(intel_dp) && dev_priv->vbt.edp.bpp &&
+	    pipe_config->pipe_bpp > dev_priv->vbt.edp.bpp) {
 		/*
 		 * This is a big fat ugly hack.
 		 *
@@ -2483,8 +2402,8 @@ static void intel_dp_get_config(struct intel_encoder *encoder,
 		 * load.
 		 */
 		DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n",
-			      pipe_config->pipe_bpp, dev_priv->vbt.edp_bpp);
-		dev_priv->vbt.edp_bpp = pipe_config->pipe_bpp;
+			      pipe_config->pipe_bpp, dev_priv->vbt.edp.bpp);
+		dev_priv->vbt.edp.bpp = pipe_config->pipe_bpp;
 	}
 }
 
@@ -3238,7 +3157,7 @@ intel_dp_voltage_max(struct intel_dp *intel_dp)
 	if (IS_BROXTON(dev))
 		return DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
 	else if (INTEL_INFO(dev)->gen >= 9) {
-		if (dev_priv->edp_low_vswing && port == PORT_A)
+		if (dev_priv->vbt.edp.low_vswing && port == PORT_A)
 			return DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
 		return DP_TRAIN_VOLTAGE_SWING_LEVEL_2;
 	} else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
@@ -3963,6 +3882,9 @@ intel_dp_probe_mst(struct intel_dp *intel_dp)
 {
 	u8 buf[1];
 
+	if (!i915.enable_dp_mst)
+		return false;
+
 	if (!intel_dp->can_mst)
 		return false;
 
@@ -5071,14 +4993,6 @@ put_power:
 bool intel_dp_is_edp(struct drm_device *dev, enum port port)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	union child_device_config *p_child;
-	int i;
-	static const short port_mapping[] = {
-		[PORT_B] = DVO_PORT_DPB,
-		[PORT_C] = DVO_PORT_DPC,
-		[PORT_D] = DVO_PORT_DPD,
-		[PORT_E] = DVO_PORT_DPE,
-	};
 
 	/*
 	 * eDP not supported on g4x. so bail out early just
@@ -5090,18 +5004,7 @@ bool intel_dp_is_edp(struct drm_device *dev, enum port port)
 	if (port == PORT_A)
 		return true;
 
-	if (!dev_priv->vbt.child_dev_num)
-		return false;
-
-	for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
-		p_child = dev_priv->vbt.child_dev + i;
-
-		if (p_child->common.dvo_port == port_mapping[port] &&
-		    (p_child->common.device_type & DEVICE_TYPE_eDP_BITS) ==
-		    (DEVICE_TYPE_eDP & DEVICE_TYPE_eDP_BITS))
-			return true;
-	}
-	return false;
+	return intel_bios_is_port_edp(dev_priv, port);
 }
 
 void
@@ -5208,7 +5111,7 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev,
 	DRM_DEBUG_KMS("cur t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n",
 		      cur.t1_t3, cur.t8, cur.t9, cur.t10, cur.t11_t12);
 
-	vbt = dev_priv->vbt.edp_pps;
+	vbt = dev_priv->vbt.edp.pps;
 
 	/* Upper limits from eDP 1.3 spec. Note that we use the clunky units of
 	 * our hw here, which are all in 100usec. */
@@ -5259,7 +5162,7 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 pp_on, pp_off, pp_div, port_sel = 0;
-	int div = HAS_PCH_SPLIT(dev) ? intel_pch_rawclk(dev) : intel_hrawclk(dev);
+	int div = dev_priv->rawclk_freq / 1000;
 	i915_reg_t pp_on_reg, pp_off_reg, pp_div_reg, pp_ctrl_reg;
 	enum port port = dp_to_dig_port(intel_dp)->port;
 	const struct edp_power_seq *seq = &intel_dp->pps_delays;
@@ -5852,19 +5755,17 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 	/* intel_dp vfuncs */
 	if (INTEL_INFO(dev)->gen >= 9)
 		intel_dp->get_aux_clock_divider = skl_get_aux_clock_divider;
-	else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
-		intel_dp->get_aux_clock_divider = vlv_get_aux_clock_divider;
 	else if (IS_HASWELL(dev) || IS_BROADWELL(dev))
 		intel_dp->get_aux_clock_divider = hsw_get_aux_clock_divider;
 	else if (HAS_PCH_SPLIT(dev))
 		intel_dp->get_aux_clock_divider = ilk_get_aux_clock_divider;
 	else
-		intel_dp->get_aux_clock_divider = i9xx_get_aux_clock_divider;
+		intel_dp->get_aux_clock_divider = g4x_get_aux_clock_divider;
 
 	if (INTEL_INFO(dev)->gen >= 9)
 		intel_dp->get_aux_send_ctl = skl_get_aux_send_ctl;
 	else
-		intel_dp->get_aux_send_ctl = i9xx_get_aux_send_ctl;
+		intel_dp->get_aux_send_ctl = g4x_get_aux_send_ctl;
 
 	if (HAS_DDI(dev))
 		intel_dp->prepare_link_retrain = intel_ddi_prepare_link_retrain;