Merge branch 'topic/acpi' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-pxa2xx

1 files changed, 23 insertions, 22 deletions

diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 141eaa923e18..bb39a29b2db6 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -329,6 +329,7 @@ static int mmc_read_switch(struct mmc_card *card)
 		card->sw_caps.sd3_bus_mode = status[13];
 		/* Driver Strengths supported by the card */
 		card->sw_caps.sd3_drv_type = status[9];
+		card->sw_caps.sd3_curr_limit = status[7] | status[6] << 8;
 	}
 
 out:
@@ -545,14 +546,25 @@ static int sd_set_current_limit(struct mmc_card *card, u8 *status)
 	 * when we set current limit to 200ma, the card will draw 200ma, and
 	 * when we set current limit to 400/600/800ma, the card will draw its
 	 * maximum 300ma from the host.
+	 *
+	 * The above is incorrect: if we try to set a current limit that is
+	 * not supported by the card, the card can rightfully error out the
+	 * attempt, and remain at the default current limit.  This results
+	 * in a 300mA card being limited to 200mA even though the host
+	 * supports 800mA. Failures seen with SanDisk 8GB UHS cards with
+	 * an iMX6 host. --rmk
 	 */
-	if (max_current >= 800)
+	if (max_current >= 800 &&
+	    card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_800)
 		current_limit = SD_SET_CURRENT_LIMIT_800;
-	else if (max_current >= 600)
+	else if (max_current >= 600 &&
+		 card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_600)
 		current_limit = SD_SET_CURRENT_LIMIT_600;
-	else if (max_current >= 400)
+	else if (max_current >= 400 &&
+		 card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_400)
 		current_limit = SD_SET_CURRENT_LIMIT_400;
-	else if (max_current >= 200)
+	else if (max_current >= 200 &&
+		 card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_200)
 		current_limit = SD_SET_CURRENT_LIMIT_200;
 
 	if (current_limit != SD_SET_CURRENT_NO_CHANGE) {
@@ -626,9 +638,9 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card)
 	 * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104.
 	 */
 	if (!mmc_host_is_spi(card->host) &&
-		(card->sd_bus_speed == UHS_SDR50_BUS_SPEED ||
-		 card->sd_bus_speed == UHS_DDR50_BUS_SPEED ||
-		 card->sd_bus_speed == UHS_SDR104_BUS_SPEED)) {
+		(card->host->ios.timing == MMC_TIMING_UHS_SDR50 ||
+		 card->host->ios.timing == MMC_TIMING_UHS_DDR50 ||
+		 card->host->ios.timing == MMC_TIMING_UHS_SDR104)) {
 		err = mmc_execute_tuning(card);
 
 		/*
@@ -638,7 +650,7 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card)
 		 * difference between v3.00 and 3.01 spec means that CMD19
 		 * tuning is also available for DDR50 mode.
 		 */
-		if (err && card->sd_bus_speed == UHS_DDR50_BUS_SPEED) {
+		if (err && card->host->ios.timing == MMC_TIMING_UHS_DDR50) {
 			pr_warn("%s: ddr50 tuning failed\n",
 				mmc_hostname(card->host));
 			err = 0;
@@ -1128,16 +1140,8 @@ out:
  */
 static int mmc_sd_resume(struct mmc_host *host)
 {
-	int err = 0;
-
-	if (!(host->caps & MMC_CAP_RUNTIME_RESUME)) {
-		err = _mmc_sd_resume(host);
-		pm_runtime_set_active(&host->card->dev);
-		pm_runtime_mark_last_busy(&host->card->dev);
-	}
 	pm_runtime_enable(&host->card->dev);
-
-	return err;
+	return 0;
 }
 
 /*
@@ -1165,12 +1169,9 @@ static int mmc_sd_runtime_resume(struct mmc_host *host)
 {
 	int err;
 
-	if (!(host->caps & (MMC_CAP_AGGRESSIVE_PM | MMC_CAP_RUNTIME_RESUME)))
-		return 0;
-
 	err = _mmc_sd_resume(host);
-	if (err)
-		pr_err("%s: error %d doing aggressive resume\n",
+	if (err && err != -ENOMEDIUM)
+		pr_err("%s: error %d doing runtime resume\n",
 			mmc_hostname(host), err);
 
 	return 0;