Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) mlx4 driver bug fixes (TX queue wakeups, csum complete indications)
    from Ido Shamay, Eran Ben Elisha, and Or Gerlitz.

 2) Missing unlock in error path of PTP support in renesas driver, from
    Dan Carpenter.

 3) Add Vitesse 8641 phy IDs to vitesse PHY driver, from Shaohui Xie.

 4) Bnx2x driver bug fixes (linearization of encap packets, scratchpad
    parity error notifications, flow-control and speed settings) from
    Yuval Mintz, Manish Chopra, Shahed Shaikh, and Ariel Elior.

 5) ipv6 extension header parsing in the igb chip has a HW errata,
    disable it.  Frm Todd Fujinaka.

 6) Fix PCI link state locking issue in e1000e driver, from Yanir
    Lubetkin.

 7) Cure panics during MTU change in i40e, from Mitch Williams.

 8) Don't leak promisc refs in DSA slave driver, from Gilad Ben-Yossef.

 9) Add missing HAS_DMA dep to VIA Rhine driver, from Geery
    Uytterhoeven.

10) Make sure DMA map/unmap calls are symmetric in bnx2x driver, from
    Michal Schmidt.

11) Workaround for MDIO access problems in bcm7xxx devices, from FLorian
    Fainelli.

12) Fix races in SCTP protocol between OTTB responses and route
    removals, from Alexander Sverdlin.

13) Fix jumbo frame checksum issue with some mvneta devices, from Simon
    Guinot.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (58 commits)
  sock_diag: don't broadcast kernel sockets
  net: mvneta: disable IP checksum with jumbo frames for Armada 370
  ARM: mvebu: update Ethernet compatible string for Armada XP
  net: mvneta: introduce compatible string "marvell, armada-xp-neta"
  api: fix compatibility of linux/in.h with netinet/in.h
  net: icplus: fix typo in constant name
  sis900: Trivial: Fix typos in enums
  stmmac: Trivial: fix typo in constant name
  sctp: Fix race between OOTB responce and route removal
  net-Liquidio: Delete unnecessary checks before the function call "vfree"
  vmxnet3: Bump up driver version number
  amd-xgbe: Add the __GFP_NOWARN flag to Rx buffer allocation
  net: phy: mdio-bcm-unimac: workaround initial read failures for integrated PHYs
  net: bcmgenet: workaround initial read failures for integrated PHYs
  net: phy: bcm7xxx: workaround MDIO management controller initial read
  bnx2x: fix DMA API usage
  net: via: VIA_RHINE and VIA_VELOCITY should depend on HAS_DMA
  net/phy: tune get_phy_c45_ids to support more c45 phy
  bnx2x: fix lockdep splat
  net: fec: don't access RACC register when not available
  ...

1 files changed, 41 insertions, 19 deletions

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 33501bcddc48..c27af12314ed 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -2287,13 +2287,11 @@ static int bnx2x_set_spio(struct bnx2x *bp, int spio, u32 mode)
 void bnx2x_calc_fc_adv(struct bnx2x *bp)
 {
 	u8 cfg_idx = bnx2x_get_link_cfg_idx(bp);
+
+	bp->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause |
+					   ADVERTISED_Pause);
 	switch (bp->link_vars.ieee_fc &
 		MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) {
-	case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE:
-		bp->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause |
-						   ADVERTISED_Pause);
-		break;
-
 	case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH:
 		bp->port.advertising[cfg_idx] |= (ADVERTISED_Asym_Pause |
 						  ADVERTISED_Pause);
@@ -2304,8 +2302,6 @@ void bnx2x_calc_fc_adv(struct bnx2x *bp)
 		break;
 
 	default:
-		bp->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause |
-						   ADVERTISED_Pause);
 		break;
 	}
 }
@@ -2351,12 +2347,16 @@ int bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode)
 		if (load_mode == LOAD_DIAG) {
 			struct link_params *lp = &bp->link_params;
 			lp->loopback_mode = LOOPBACK_XGXS;
-			/* do PHY loopback at 10G speed, if possible */
-			if (lp->req_line_speed[cfx_idx] < SPEED_10000) {
+			/* Prefer doing PHY loopback at highest speed */
+			if (lp->req_line_speed[cfx_idx] < SPEED_20000) {
 				if (lp->speed_cap_mask[cfx_idx] &
-				    PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
+				    PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)
 					lp->req_line_speed[cfx_idx] =
-					SPEED_10000;
+					SPEED_20000;
+				else if (lp->speed_cap_mask[cfx_idx] &
+					    PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
+						lp->req_line_speed[cfx_idx] =
+						SPEED_10000;
 				else
 					lp->req_line_speed[cfx_idx] =
 					SPEED_1000;
@@ -4867,9 +4867,7 @@ static bool bnx2x_check_blocks_with_parity3(struct bnx2x *bp, u32 sig,
 				res = true;
 				break;
 			case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY:
-				if (print)
-					_print_next_block((*par_num)++,
-							  "MCP SCPAD");
+				(*par_num)++;
 				/* clear latched SCPAD PATIRY from MCP */
 				REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL,
 				       1UL << 10);
@@ -4931,6 +4929,7 @@ static bool bnx2x_parity_attn(struct bnx2x *bp, bool *global, bool print,
 	    (sig[3] & HW_PRTY_ASSERT_SET_3) ||
 	    (sig[4] & HW_PRTY_ASSERT_SET_4)) {
 		int par_num = 0;
+
 		DP(NETIF_MSG_HW, "Was parity error: HW block parity attention:\n"
 				 "[0]:0x%08x [1]:0x%08x [2]:0x%08x [3]:0x%08x [4]:0x%08x\n",
 			  sig[0] & HW_PRTY_ASSERT_SET_0,
@@ -4938,9 +4937,18 @@ static bool bnx2x_parity_attn(struct bnx2x *bp, bool *global, bool print,
 			  sig[2] & HW_PRTY_ASSERT_SET_2,
 			  sig[3] & HW_PRTY_ASSERT_SET_3,
 			  sig[4] & HW_PRTY_ASSERT_SET_4);
-		if (print)
-			netdev_err(bp->dev,
-				   "Parity errors detected in blocks: ");
+		if (print) {
+			if (((sig[0] & HW_PRTY_ASSERT_SET_0) ||
+			     (sig[1] & HW_PRTY_ASSERT_SET_1) ||
+			     (sig[2] & HW_PRTY_ASSERT_SET_2) ||
+			     (sig[4] & HW_PRTY_ASSERT_SET_4)) ||
+			     (sig[3] & HW_PRTY_ASSERT_SET_3_WITHOUT_SCPAD)) {
+				netdev_err(bp->dev,
+					   "Parity errors detected in blocks: ");
+			} else {
+				print = false;
+			}
+		}
 		res |= bnx2x_check_blocks_with_parity0(bp,
 			sig[0] & HW_PRTY_ASSERT_SET_0, &par_num, print);
 		res |= bnx2x_check_blocks_with_parity1(bp,
@@ -8431,7 +8439,7 @@ int bnx2x_set_eth_mac(struct bnx2x *bp, bool set)
 					 BNX2X_ETH_MAC, &ramrod_flags);
 	} else { /* vf */
 		return bnx2x_vfpf_config_mac(bp, bp->dev->dev_addr,
-					     bp->fp->index, true);
+					     bp->fp->index, set);
 	}
 }
 
@@ -9323,7 +9331,8 @@ unload_error:
 	 * function stop ramrod is sent, since as part of this ramrod FW access
 	 * PTP registers.
 	 */
-	bnx2x_stop_ptp(bp);
+	if (bp->flags & PTP_SUPPORTED)
+		bnx2x_stop_ptp(bp);
 
 	/* Disable HW interrupts, NAPI */
 	bnx2x_netif_stop(bp, 1);
@@ -11147,6 +11156,12 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
 				bp->port.advertising[idx] |=
 					(ADVERTISED_1000baseT_Full |
 					 ADVERTISED_TP);
+			} else if (bp->port.supported[idx] &
+				   SUPPORTED_1000baseKX_Full) {
+				bp->link_params.req_line_speed[idx] =
+					SPEED_1000;
+				bp->port.advertising[idx] |=
+					ADVERTISED_1000baseKX_Full;
 			} else {
 				BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x  speed_cap_mask 0x%x\n",
 				    link_config,
@@ -11179,6 +11194,13 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
 				bp->port.advertising[idx] |=
 					(ADVERTISED_10000baseT_Full |
 						ADVERTISED_FIBRE);
+			} else if (bp->port.supported[idx] &
+				   SUPPORTED_10000baseKR_Full) {
+				bp->link_params.req_line_speed[idx] =
+					SPEED_10000;
+				bp->port.advertising[idx] |=
+					(ADVERTISED_10000baseKR_Full |
+						ADVERTISED_FIBRE);
 			} else {
 				BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x  speed_cap_mask 0x%x\n",
 				    link_config,