diff options
| author | Jesse Brandeburg <jesse.brandeburg@intel.com> | 2015-09-28 14:16:53 -0400 |
|---|---|---|
| committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2015-10-19 15:35:04 -0700 |
| commit | c56625d59726ee2dc4dfd91c8b6c22098abe1ac4 (patch) | |
| tree | 11c4645c5aa0d2790fb35abe4f217c51323be714 /drivers/net/ethernet/intel/i40evf/i40e_txrx.c | |
| parent | 51cc6d9fccde27310b7dfba2be268ff5b8dcf52d (diff) | |
i40e/i40evf: change dynamic interrupt thresholds
The dynamic algorithm, while now working, doesn't have good
performance in 40G mode.
One part of this patch addresses the high CPU utilization of some small
streaming workloads that the driver should reduce CPU in.
It also changes the minimum ITR that the dynamic algorithm
will settle on, causing our minimum latency to go from 12us
to about 14us, when using adaptive mode.
It also changes the BULK interrupt rate to allow maximum throughput
on a 40Gb connection with a single thread of transmit, clamping
interrupt rate to 8000 for TX makes single thread traffic go too
slow.
The new ULTRA bulk setting is introduced and is used
when the Rx packet rate on this queue exceeds 40000 packets per
second. This value of 40000 was chosen because the automatic tuning
of minimum ITR=20us means that a single queue can't quite achieve
that many packets per second from a round-robin test.
Change-ID: Icce8faa128688ca5fd2c4229bdd9726877a92ea2
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet/intel/i40evf/i40e_txrx.c')
| -rw-r--r-- | drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 27 |
1 files changed, 21 insertions, 6 deletions
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c index 7d98042338e0..d76fe4a948df 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c @@ -331,6 +331,7 @@ static void i40evf_force_wb(struct i40e_vsi *vsi, struct i40e_q_vector *q_vector static bool i40e_set_new_dynamic_itr(struct i40e_ring_container *rc) { enum i40e_latency_range new_latency_range = rc->latency_range; + struct i40e_q_vector *qv = rc->ring->q_vector; u32 new_itr = rc->itr; int bytes_per_int; int usecs; @@ -339,9 +340,10 @@ static bool i40e_set_new_dynamic_itr(struct i40e_ring_container *rc) return false; /* simple throttlerate management - * 0-10MB/s lowest (100000 ints/s) + * 0-10MB/s lowest (50000 ints/s) * 10-20MB/s low (20000 ints/s) - * 20-1249MB/s bulk (8000 ints/s) + * 20-1249MB/s bulk (18000 ints/s) + * > 40000 Rx packets per second (8000 ints/s) * * The math works out because the divisor is in 10^(-6) which * turns the bytes/us input value into MB/s values, but @@ -362,24 +364,37 @@ static bool i40e_set_new_dynamic_itr(struct i40e_ring_container *rc) new_latency_range = I40E_LOWEST_LATENCY; break; case I40E_BULK_LATENCY: - if (bytes_per_int <= 20) - new_latency_range = I40E_LOW_LATENCY; - break; + case I40E_ULTRA_LATENCY: default: if (bytes_per_int <= 20) new_latency_range = I40E_LOW_LATENCY; break; } + + /* this is to adjust RX more aggressively when streaming small + * packets. The value of 40000 was picked as it is just beyond + * what the hardware can receive per second if in low latency + * mode. + */ +#define RX_ULTRA_PACKET_RATE 40000 + + if ((((rc->total_packets * 1000000) / usecs) > RX_ULTRA_PACKET_RATE) && + (&qv->rx == rc)) + new_latency_range = I40E_ULTRA_LATENCY; + rc->latency_range = new_latency_range; switch (new_latency_range) { case I40E_LOWEST_LATENCY: - new_itr = I40E_ITR_100K; + new_itr = I40E_ITR_50K; break; case I40E_LOW_LATENCY: new_itr = I40E_ITR_20K; break; case I40E_BULK_LATENCY: + new_itr = I40E_ITR_18K; + break; + case I40E_ULTRA_LATENCY: new_itr = I40E_ITR_8K; break; default: |