Merge branch 'patchwork' into topic/docs-next

* patchwork: (1492 commits)
  [media] cec: always check all_device_types and features
  [media] cec: poll should check if there is room in the tx queue
  [media] vivid: support monitor all mode
  [media] cec: fix test for unconfigured adapter in main message loop
  [media] cec: limit the size of the transmit queue
  [media] cec: zero unused msg part after msg->len
  [media] cec: don't set fh to NULL in CEC_TRANSMIT
  [media] cec: clear all status fields before transmit and always fill in sequence
  [media] cec: CEC_RECEIVE overwrote the timeout field
  [media] cxd2841er: Reading SNR for DVB-C added
  [media] cxd2841er: Reading BER and UCB for DVB-C added
  [media] cxd2841er: fix switch-case for DVB-C
  [media] cxd2841er: fix signal strength scale for ISDB-T
  [media] cxd2841er: adjust the dB scale for DVB-C
  [media] cxd2841er: provide signal strength for DVB-C
  [media] cxd2841er: fix BER report via DVBv5 stats API
  [media] mb86a20s: apply mask to val after checking for read failure
  [media] airspy: fix error logic during device register
  [media] s5p-cec/TODO: add TODO item
  [media] cec/TODO: drop comment about sphinx documentation
  ...

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

1 files changed, 69 insertions, 13 deletions

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 280e8795b463..ec2c1eee6405 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -285,6 +285,48 @@ static int marvell_config_aneg(struct phy_device *phydev)
 	return 0;
 }
 
+static int m88e1111_config_aneg(struct phy_device *phydev)
+{
+	int err;
+
+	/* The Marvell PHY has an errata which requires
+	 * that certain registers get written in order
+	 * to restart autonegotiation
+	 */
+	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+
+	err = marvell_set_polarity(phydev, phydev->mdix);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, MII_M1111_PHY_LED_CONTROL,
+			MII_M1111_PHY_LED_DIRECT);
+	if (err < 0)
+		return err;
+
+	err = genphy_config_aneg(phydev);
+	if (err < 0)
+		return err;
+
+	if (phydev->autoneg != AUTONEG_ENABLE) {
+		int bmcr;
+
+		/* A write to speed/duplex bits (that is performed by
+		 * genphy_config_aneg() call above) must be followed by
+		 * a software reset. Otherwise, the write has no effect.
+		 */
+		bmcr = phy_read(phydev, MII_BMCR);
+		if (bmcr < 0)
+			return bmcr;
+
+		err = phy_write(phydev, MII_BMCR, bmcr | BMCR_RESET);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
 #ifdef CONFIG_OF_MDIO
 /*
  * Set and/or override some configuration registers based on the
@@ -407,15 +449,7 @@ static int m88e1121_config_aneg(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
-	oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
-
-	phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_LED_PAGE);
-	phy_write(phydev, MII_88E1121_PHY_LED_CTRL, MII_88E1121_PHY_LED_DEF);
-	phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
-
-	err = genphy_config_aneg(phydev);
-
-	return err;
+	return genphy_config_aneg(phydev);
 }
 
 static int m88e1318_config_aneg(struct phy_device *phydev)
@@ -636,6 +670,28 @@ static int m88e1111_config_init(struct phy_device *phydev)
 	return phy_write(phydev, MII_BMCR, BMCR_RESET);
 }
 
+static int m88e1121_config_init(struct phy_device *phydev)
+{
+	int err, oldpage;
+
+	oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
+
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_LED_PAGE);
+	if (err < 0)
+		return err;
+
+	/* Default PHY LED config: LED[0] .. Link, LED[1] .. Activity */
+	err = phy_write(phydev, MII_88E1121_PHY_LED_CTRL,
+			MII_88E1121_PHY_LED_DEF);
+	if (err < 0)
+		return err;
+
+	phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
+
+	/* Set marvell,reg-init configuration from device tree */
+	return marvell_config_init(phydev);
+}
+
 static int m88e1510_config_init(struct phy_device *phydev)
 {
 	int err;
@@ -668,7 +724,7 @@ static int m88e1510_config_init(struct phy_device *phydev)
 			return err;
 	}
 
-	return marvell_config_init(phydev);
+	return m88e1121_config_init(phydev);
 }
 
 static int m88e1118_config_aneg(struct phy_device *phydev)
@@ -1161,7 +1217,7 @@ static struct phy_driver marvell_drivers[] = {
 		.flags = PHY_HAS_INTERRUPT,
 		.probe = marvell_probe,
 		.config_init = &m88e1111_config_init,
-		.config_aneg = &marvell_config_aneg,
+		.config_aneg = &m88e1111_config_aneg,
 		.read_status = &marvell_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,
 		.config_intr = &marvell_config_intr,
@@ -1196,7 +1252,7 @@ static struct phy_driver marvell_drivers[] = {
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
 		.probe = marvell_probe,
-		.config_init = &marvell_config_init,
+		.config_init = &m88e1121_config_init,
 		.config_aneg = &m88e1121_config_aneg,
 		.read_status = &marvell_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,
@@ -1215,7 +1271,7 @@ static struct phy_driver marvell_drivers[] = {
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
 		.probe = marvell_probe,
-		.config_init = &marvell_config_init,
+		.config_init = &m88e1121_config_init,
 		.config_aneg = &m88e1318_config_aneg,
 		.read_status = &marvell_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,