Merge remote branch 'rmk/for-linus' into for-linus

* rmk/for-linus: (1557 commits)
  ARM: 6806/1: irq: introduce entry and exit functions for chained handlers
  ARM: 6781/1: Thumb-2: Work around buggy Thumb-2 short branch relocations in gas
  ARM: 6747/1: P2V: Thumb2 support
  ARM: 6798/1: aout-core: zero thread debug registers in a.out core dump
  ARM: 6796/1: Footbridge: Fix I/O mappings for NOMMU mode
  ARM: 6784/1: errata: no automatic Store Buffer drain on Cortex-A9
  ARM: 6772/1: errata: possible fault MMU translations following an ASID switch
  ARM: 6776/1: mach-ux500: activate fix for errata 753970
  ARM: 6794/1: SPEAr: Append UL to device address macros.
  ARM: 6793/1: SPEAr: Remove unused *_SIZE macros from spear*.h files
  ARM: 6792/1: SPEAr: Replace SIZE macro's with SZ_4K macros
  ARM: 6791/1: SPEAr3xx: Declare device structures after shirq code
  ARM: 6790/1: SPEAr: Clock Framework: Rename usbd clock and align apb_clk entry
  ARM: 6789/1: SPEAr3xx: Rename sdio to sdhci
  ARM: 6788/1: SPEAr: Include mach/hardware.h instead of mach/spear.h
  ARM: 6787/1: SPEAr: Reorder #includes in .h & .c files.
  ARM: 6681/1: SPEAr: add debugfs support to clk API
  ARM: 6703/1: SPEAr: update clk API support
  ARM: 6679/1: SPEAr: make clk API functions more generic
  ARM: 6737/1: SPEAr: formalized timer support
  ...

Conflicts:
	arch/arm/mach-msm/board-msm7x27.c
	arch/arm/mach-msm/board-msm7x30.c
	arch/arm/mach-msm/board-qsd8x50.c
	arch/arm/mach-msm/board-sapphire.c
	arch/arm/mach-msm/include/mach/memory.h

1 files changed, 33 insertions, 11 deletions

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index b98efae6a1cf..0f299b7aad60 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -676,6 +676,8 @@ static void hub_init_func3(struct work_struct *ws);
 static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 {
 	struct usb_device *hdev = hub->hdev;
+	struct usb_hcd *hcd;
+	int ret;
 	int port1;
 	int status;
 	bool need_debounce_delay = false;
@@ -714,6 +716,25 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 			usb_autopm_get_interface_no_resume(
 					to_usb_interface(hub->intfdev));
 			return;		/* Continues at init2: below */
+		} else if (type == HUB_RESET_RESUME) {
+			/* The internal host controller state for the hub device
+			 * may be gone after a host power loss on system resume.
+			 * Update the device's info so the HW knows it's a hub.
+			 */
+			hcd = bus_to_hcd(hdev->bus);
+			if (hcd->driver->update_hub_device) {
+				ret = hcd->driver->update_hub_device(hcd, hdev,
+						&hub->tt, GFP_NOIO);
+				if (ret < 0) {
+					dev_err(hub->intfdev, "Host not "
+							"accepting hub info "
+							"update.\n");
+					dev_err(hub->intfdev, "LS/FS devices "
+							"and hubs may not work "
+							"under this hub\n.");
+				}
+			}
+			hub_power_on(hub, true);
 		} else {
 			hub_power_on(hub, true);
 		}
@@ -2660,17 +2681,13 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 
 	mutex_lock(&usb_address0_mutex);
 
-	if (!udev->config && oldspeed == USB_SPEED_SUPER) {
-		/* Don't reset USB 3.0 devices during an initial setup */
-		usb_set_device_state(udev, USB_STATE_DEFAULT);
-	} else {
-		/* Reset the device; full speed may morph to high speed */
-		/* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
-		retval = hub_port_reset(hub, port1, udev, delay);
-		if (retval < 0)		/* error or disconnect */
-			goto fail;
-		/* success, speed is known */
-	}
+	/* Reset the device; full speed may morph to high speed */
+	/* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
+	retval = hub_port_reset(hub, port1, udev, delay);
+	if (retval < 0)		/* error or disconnect */
+		goto fail;
+	/* success, speed is known */
+
 	retval = -ENODEV;
 
 	if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed) {
@@ -2732,6 +2749,11 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 		udev->ttport = hdev->ttport;
 	} else if (udev->speed != USB_SPEED_HIGH
 			&& hdev->speed == USB_SPEED_HIGH) {
+		if (!hub->tt.hub) {
+			dev_err(&udev->dev, "parent hub has no TT\n");
+			retval = -EINVAL;
+			goto fail;
+		}
 		udev->tt = &hub->tt;
 		udev->ttport = port1;
 	}