Merge tag 'usb-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB patches from Greg Kroah-Hartman:
 "Here's the big set of USB patches for 3.8-rc1.

  Lots of USB host driver cleanups in here, and a bit of a reorg of the
  EHCI driver to make it easier for the different EHCI platform drivers
  to all work together nicer, which was a reduction in overall code.  We
  also deleted some unused firmware files, and got rid of the very old
  file_storage usb gadget driver that had been broken for a long time.
  This means we ended up removing way more code than added, always a
  nice thing to see:
	 310 files changed, 3028 insertions(+), 10754 deletions(-)

  Other than that, the usual set of new device ids, driver fixes, gadget
  driver and controller updates and the like.

  All of these have been in the linux-next tree for a number of weeks.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (228 commits)
  USB: mark uas driver as BROKEN
  xhci: Add Lynx Point LP to list of Intel switchable hosts
  uwb: fix uwb_dev_unlock() missed at an error path in uwb_rc_cmd_async()
  USB: ftdi_sio: Add support for Newport AGILIS motor drivers
  MAINTAINERS: remove drivers/block/ub.c
  USB: chipidea: fix use after free bug
  ezusb: add dependency to USB
  usb: ftdi_sio: fixup BeagleBone A5+ quirk
  USB: cp210x: add Virtenio Preon32 device id
  usb: storage: remove redundant memset() in usb_probe_stor1()
  USB: option: blacklist network interface on Huawei E173
  USB: OHCI: workaround for hardware bug: retired TDs not added to the Done Queue
  USB: add new zte 3g-dongle's pid to option.c
  USB: opticon: switch to generic read implementation
  USB: opticon: refactor reab-urb processing
  USB: opticon: use usb-serial bulk-in urb
  USB: opticon: increase bulk-in size
  USB: opticon: use port as urb context
  USB: opticon: pass port to get_serial_info
  USB: opticon: make private data port specific
  ...

1 files changed, 49 insertions, 83 deletions

diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 2cb7d370c4ef..dabb20494826 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -18,9 +18,18 @@
  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef CONFIG_PCI
-#error "This file is PCI bus glue.  CONFIG_PCI must be defined."
-#endif
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ehci.h"
+#include "pci-quirks.h"
+
+#define DRIVER_DESC "EHCI PCI platform driver"
+
+static const char hcd_name[] = "ehci-pci";
 
 /* defined here to avoid adding to pci_ids.h for single instance use */
 #define PCI_DEVICE_ID_INTEL_CE4100_USB	0x2e70
@@ -103,7 +112,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 		}
 		break;
 	case PCI_VENDOR_ID_INTEL:
-		ehci->fs_i_thresh = 1;
 		if (pdev->device == PCI_DEVICE_ID_INTEL_CE4100_USB)
 			hcd->has_tt = 1;
 		break;
@@ -203,11 +211,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 		break;
 	case PCI_VENDOR_ID_INTEL:
 		ehci->need_io_watchdog = 0;
-		if (pdev->device == 0x0806 || pdev->device == 0x0811
-				|| pdev->device == 0x0829) {
-			ehci_info(ehci, "disable lpm for langwell/penwell\n");
-			ehci->has_lpm = 0;
-		}
 		break;
 	case PCI_VENDOR_ID_NVIDIA:
 		switch (pdev->device) {
@@ -217,8 +220,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 		 * devices with PPCD enabled.
 		 */
 		case 0x0d9d:
-			ehci_info(ehci, "disable lpm/ppcd for nvidia mcp89");
-			ehci->has_lpm = 0;
+			ehci_info(ehci, "disable ppcd for nvidia mcp89\n");
 			ehci->has_ppcd = 0;
 			ehci->command &= ~CMD_PPCEE;
 			break;
@@ -304,7 +306,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 		ehci_warn(ehci, "selective suspend/wakeup unavailable\n");
 #endif
 
-	ehci_port_power(ehci, 1);
 	retval = ehci_pci_reinit(ehci, pdev);
 done:
 	return retval;
@@ -323,18 +324,14 @@ done:
  * Also they depend on separate root hub suspend/resume.
  */
 
-static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
-{
-	return ehci_suspend(hcd, do_wakeup);
-}
-
 static bool usb_is_intel_switchable_ehci(struct pci_dev *pdev)
 {
 	return pdev->class == PCI_CLASS_SERIAL_USB_EHCI &&
 		pdev->vendor == PCI_VENDOR_ID_INTEL &&
 		(pdev->device == 0x1E26 ||
 		 pdev->device == 0x8C2D ||
-		 pdev->device == 0x8C26);
+		 pdev->device == 0x8C26 ||
+		 pdev->device == 0x9C26);
 }
 
 static void ehci_enable_xhci_companion(void)
@@ -378,76 +375,17 @@ static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 		(void) ehci_pci_reinit(ehci, pdev);
 	return 0;
 }
-#endif
 
-static int ehci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
-{
-	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-	int rc = 0;
-
-	if (!udev->parent) /* udev is root hub itself, impossible */
-		rc = -1;
-	/* we only support lpm device connected to root hub yet */
-	if (ehci->has_lpm && !udev->parent->parent) {
-		rc = ehci_lpm_set_da(ehci, udev->devnum, udev->portnum);
-		if (!rc)
-			rc = ehci_lpm_check(ehci, udev->portnum);
-	}
-	return rc;
-}
+#else
 
-static const struct hc_driver ehci_pci_hc_driver = {
-	.description =		hcd_name,
-	.product_desc =		"EHCI Host Controller",
-	.hcd_priv_size =	sizeof(struct ehci_hcd),
+#define ehci_suspend		NULL
+#define ehci_pci_resume		NULL
+#endif	/* CONFIG_PM */
 
-	/*
-	 * generic hardware linkage
-	 */
-	.irq =			ehci_irq,
-	.flags =		HCD_MEMORY | HCD_USB2,
+static struct hc_driver __read_mostly ehci_pci_hc_driver;
 
-	/*
-	 * basic lifecycle operations
-	 */
+static const struct ehci_driver_overrides pci_overrides __initdata = {
 	.reset =		ehci_pci_setup,
-	.start =		ehci_run,
-#ifdef	CONFIG_PM
-	.pci_suspend =		ehci_pci_suspend,
-	.pci_resume =		ehci_pci_resume,
-#endif
-	.stop =			ehci_stop,
-	.shutdown =		ehci_shutdown,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue =		ehci_urb_enqueue,
-	.urb_dequeue =		ehci_urb_dequeue,
-	.endpoint_disable =	ehci_endpoint_disable,
-	.endpoint_reset =	ehci_endpoint_reset,
-
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number =	ehci_get_frame,
-
-	/*
-	 * root hub support
-	 */
-	.hub_status_data =	ehci_hub_status_data,
-	.hub_control =		ehci_hub_control,
-	.bus_suspend =		ehci_bus_suspend,
-	.bus_resume =		ehci_bus_resume,
-	.relinquish_port =	ehci_relinquish_port,
-	.port_handed_over =	ehci_port_handed_over,
-
-	/*
-	 * call back when device connected and addressed
-	 */
-	.update_device =	ehci_update_device,
-
-	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
 };
 
 /*-------------------------------------------------------------------------*/
@@ -480,3 +418,31 @@ static struct pci_driver ehci_pci_driver = {
 	},
 #endif
 };
+
+static int __init ehci_pci_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+	ehci_init_driver(&ehci_pci_hc_driver, &pci_overrides);
+
+	/* Entries for the PCI suspend/resume callbacks are special */
+	ehci_pci_hc_driver.pci_suspend = ehci_suspend;
+	ehci_pci_hc_driver.pci_resume = ehci_pci_resume;
+
+	return pci_register_driver(&ehci_pci_driver);
+}
+module_init(ehci_pci_init);
+
+static void __exit ehci_pci_cleanup(void)
+{
+	pci_unregister_driver(&ehci_pci_driver);
+}
+module_exit(ehci_pci_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("David Brownell");
+MODULE_AUTHOR("Alan Stern");
+MODULE_LICENSE("GPL");