Merge tag 'usb-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB patches from Greg Kroah-Hartman:
 "Here's the big set of USB patches for 3.8-rc1.

  Lots of USB host driver cleanups in here, and a bit of a reorg of the
  EHCI driver to make it easier for the different EHCI platform drivers
  to all work together nicer, which was a reduction in overall code.  We
  also deleted some unused firmware files, and got rid of the very old
  file_storage usb gadget driver that had been broken for a long time.
  This means we ended up removing way more code than added, always a
  nice thing to see:
	 310 files changed, 3028 insertions(+), 10754 deletions(-)

  Other than that, the usual set of new device ids, driver fixes, gadget
  driver and controller updates and the like.

  All of these have been in the linux-next tree for a number of weeks.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (228 commits)
  USB: mark uas driver as BROKEN
  xhci: Add Lynx Point LP to list of Intel switchable hosts
  uwb: fix uwb_dev_unlock() missed at an error path in uwb_rc_cmd_async()
  USB: ftdi_sio: Add support for Newport AGILIS motor drivers
  MAINTAINERS: remove drivers/block/ub.c
  USB: chipidea: fix use after free bug
  ezusb: add dependency to USB
  usb: ftdi_sio: fixup BeagleBone A5+ quirk
  USB: cp210x: add Virtenio Preon32 device id
  usb: storage: remove redundant memset() in usb_probe_stor1()
  USB: option: blacklist network interface on Huawei E173
  USB: OHCI: workaround for hardware bug: retired TDs not added to the Done Queue
  USB: add new zte 3g-dongle's pid to option.c
  USB: opticon: switch to generic read implementation
  USB: opticon: refactor reab-urb processing
  USB: opticon: use usb-serial bulk-in urb
  USB: opticon: increase bulk-in size
  USB: opticon: use port as urb context
  USB: opticon: pass port to get_serial_info
  USB: opticon: make private data port specific
  ...

1 files changed, 19 insertions, 13 deletions

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index c9e419f29b74..5c72c431bab1 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -40,7 +40,7 @@ MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB");
 
 /* TODO: copied from ehci-hcd.c - can this be refactored? */
 /*
- * handshake - spin reading hc until handshake completes or fails
+ * xhci_handshake - spin reading hc until handshake completes or fails
  * @ptr: address of hc register to be read
  * @mask: bits to look at in result of read
  * @done: value of those bits when handshake succeeds
@@ -52,7 +52,7 @@ MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB");
  * handshake done).  There are two failure modes:  "usec" have passed (major
  * hardware flakeout), or the register reads as all-ones (hardware removed).
  */
-int handshake(struct xhci_hcd *xhci, void __iomem *ptr,
+int xhci_handshake(struct xhci_hcd *xhci, void __iomem *ptr,
 		      u32 mask, u32 done, int usec)
 {
 	u32	result;
@@ -103,7 +103,7 @@ int xhci_halt(struct xhci_hcd *xhci)
 	xhci_dbg(xhci, "// Halt the HC\n");
 	xhci_quiesce(xhci);
 
-	ret = handshake(xhci, &xhci->op_regs->status,
+	ret = xhci_handshake(xhci, &xhci->op_regs->status,
 			STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
 	if (!ret) {
 		xhci->xhc_state |= XHCI_STATE_HALTED;
@@ -132,7 +132,7 @@ static int xhci_start(struct xhci_hcd *xhci)
 	 * Wait for the HCHalted Status bit to be 0 to indicate the host is
 	 * running.
 	 */
-	ret = handshake(xhci, &xhci->op_regs->status,
+	ret = xhci_handshake(xhci, &xhci->op_regs->status,
 			STS_HALT, 0, XHCI_MAX_HALT_USEC);
 	if (ret == -ETIMEDOUT)
 		xhci_err(xhci, "Host took too long to start, "
@@ -167,7 +167,7 @@ int xhci_reset(struct xhci_hcd *xhci)
 	command |= CMD_RESET;
 	xhci_writel(xhci, command, &xhci->op_regs->command);
 
-	ret = handshake(xhci, &xhci->op_regs->command,
+	ret = xhci_handshake(xhci, &xhci->op_regs->command,
 			CMD_RESET, 0, 10 * 1000 * 1000);
 	if (ret)
 		return ret;
@@ -177,7 +177,7 @@ int xhci_reset(struct xhci_hcd *xhci)
 	 * xHCI cannot write to any doorbells or operational registers other
 	 * than status until the "Controller Not Ready" flag is cleared.
 	 */
-	ret = handshake(xhci, &xhci->op_regs->status,
+	ret = xhci_handshake(xhci, &xhci->op_regs->status,
 			STS_CNR, 0, 10 * 1000 * 1000);
 
 	for (i = 0; i < 2; ++i) {
@@ -480,7 +480,7 @@ static bool compliance_mode_recovery_timer_quirk_check(void)
 	if (strstr(dmi_product_name, "Z420") ||
 			strstr(dmi_product_name, "Z620") ||
 			strstr(dmi_product_name, "Z820") ||
-			strstr(dmi_product_name, "Z1"))
+			strstr(dmi_product_name, "Z1 Workstation"))
 		return true;
 
 	return false;
@@ -880,6 +880,10 @@ int xhci_suspend(struct xhci_hcd *xhci)
 	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
 	u32			command;
 
+	if (hcd->state != HC_STATE_SUSPENDED ||
+			xhci->shared_hcd->state != HC_STATE_SUSPENDED)
+		return -EINVAL;
+
 	spin_lock_irq(&xhci->lock);
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
@@ -890,7 +894,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
 	command = xhci_readl(xhci, &xhci->op_regs->command);
 	command &= ~CMD_RUN;
 	xhci_writel(xhci, command, &xhci->op_regs->command);
-	if (handshake(xhci, &xhci->op_regs->status,
+	if (xhci_handshake(xhci, &xhci->op_regs->status,
 		      STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC)) {
 		xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n");
 		spin_unlock_irq(&xhci->lock);
@@ -905,7 +909,8 @@ int xhci_suspend(struct xhci_hcd *xhci)
 	command = xhci_readl(xhci, &xhci->op_regs->command);
 	command |= CMD_CSS;
 	xhci_writel(xhci, command, &xhci->op_regs->command);
-	if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10 * 1000)) {
+	if (xhci_handshake(xhci, &xhci->op_regs->status,
+				STS_SAVE, 0, 10 * 1000)) {
 		xhci_warn(xhci, "WARN: xHC save state timeout\n");
 		spin_unlock_irq(&xhci->lock);
 		return -ETIMEDOUT;
@@ -967,7 +972,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		command = xhci_readl(xhci, &xhci->op_regs->command);
 		command |= CMD_CRS;
 		xhci_writel(xhci, command, &xhci->op_regs->command);
-		if (handshake(xhci, &xhci->op_regs->status,
+		if (xhci_handshake(xhci, &xhci->op_regs->status,
 			      STS_RESTORE, 0, 10 * 1000)) {
 			xhci_warn(xhci, "WARN: xHC restore state timeout\n");
 			spin_unlock_irq(&xhci->lock);
@@ -1035,7 +1040,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 	command = xhci_readl(xhci, &xhci->op_regs->command);
 	command |= CMD_RUN;
 	xhci_writel(xhci, command, &xhci->op_regs->command);
-	handshake(xhci, &xhci->op_regs->status, STS_HALT,
+	xhci_handshake(xhci, &xhci->op_regs->status, STS_HALT,
 		  0, 250 * 1000);
 
 	/* step 5: walk topology and initialize portsc,
@@ -2254,7 +2259,7 @@ static bool xhci_is_async_ep(unsigned int ep_type)
 
 static bool xhci_is_sync_in_ep(unsigned int ep_type)
 {
-	return (ep_type == ISOC_IN_EP || ep_type != INT_IN_EP);
+	return (ep_type == ISOC_IN_EP || ep_type == INT_IN_EP);
 }
 
 static unsigned int xhci_get_ss_bw_consumed(struct xhci_bw_info *ep_bw)
@@ -3874,7 +3879,8 @@ static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd,
 	spin_lock_irqsave(&xhci->lock, flags);
 
 	/* Check L1 Status */
-	ret = handshake(xhci, pm_addr, PORT_L1S_MASK, PORT_L1S_SUCCESS, 125);
+	ret = xhci_handshake(xhci, pm_addr,
+			PORT_L1S_MASK, PORT_L1S_SUCCESS, 125);
 	if (ret != -ETIMEDOUT) {
 		/* enter L1 successfully */
 		temp = xhci_readl(xhci, addr);