Merge tag 'usb-3.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a number of tiny USB fixes for 3.4-rc4.

  Most of them are in the USB gadget area, but a few other minor USB
  driver and core fixes are here as well.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (36 commits)
  USB: serial: cp210x: Fixed usb_control_msg timeout values
  USB: ehci-tegra: don't call set_irq_flags(IRQF_VALID)
  USB: yurex: Fix missing URB_NO_TRANSFER_DMA_MAP flag in urb
  USB: yurex: Remove allocation of coherent buffer for setup-packet buffer
  drivers/usb/misc/usbtest.c: add kfrees
  USB: ehci-fsl: Fix kernel crash on mpc5121e
  uwb: fix error handling
  uwb: fix use of del_timer_sync() in interrupt
  EHCI: always clear the STS_FLR status bit
  EHCI: fix criterion for resuming the root hub
  USB: sierra: avoid QMI/wwan interface on MC77xx
  usb: usbtest: avoid integer overflow in alloc_sglist()
  usb: usbtest: avoid integer overflow in test_ctrl_queue()
  USB: fix deadlock in bConfigurationValue attribute method
  usb: gadget: eliminate NULL pointer dereference (bugfix)
  usb: gadget: uvc: Remove non-required locking from 'uvc_queue_next_buffer' routine
  usb: gadget: rndis: fix Missing req->context assignment
  usb: musb: omap: fix the error check for pm_runtime_get_sync
  usb: gadget: udc-core: fix asymmetric calls in remove_driver
  usb: musb: omap: fix crash when musb glue (omap) gets initialized
  ...

1 files changed, 33 insertions, 7 deletions

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 0f8b82918a40..66aaccf04490 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -137,6 +137,9 @@ static int musb_ulpi_read(struct usb_phy *phy, u32 offset)
 	int	i = 0;
 	u8	r;
 	u8	power;
+	int	ret;
+
+	pm_runtime_get_sync(phy->io_dev);
 
 	/* Make sure the transceiver is not in low power mode */
 	power = musb_readb(addr, MUSB_POWER);
@@ -154,15 +157,22 @@ static int musb_ulpi_read(struct usb_phy *phy, u32 offset)
 	while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
 				& MUSB_ULPI_REG_CMPLT)) {
 		i++;
-		if (i == 10000)
-			return -ETIMEDOUT;
+		if (i == 10000) {
+			ret = -ETIMEDOUT;
+			goto out;
+		}
 
 	}
 	r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
 	r &= ~MUSB_ULPI_REG_CMPLT;
 	musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
 
-	return musb_readb(addr, MUSB_ULPI_REG_DATA);
+	ret = musb_readb(addr, MUSB_ULPI_REG_DATA);
+
+out:
+	pm_runtime_put(phy->io_dev);
+
+	return ret;
 }
 
 static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data)
@@ -171,6 +181,9 @@ static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data)
 	int	i = 0;
 	u8	r = 0;
 	u8	power;
+	int	ret = 0;
+
+	pm_runtime_get_sync(phy->io_dev);
 
 	/* Make sure the transceiver is not in low power mode */
 	power = musb_readb(addr, MUSB_POWER);
@@ -184,15 +197,20 @@ static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data)
 	while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
 				& MUSB_ULPI_REG_CMPLT)) {
 		i++;
-		if (i == 10000)
-			return -ETIMEDOUT;
+		if (i == 10000) {
+			ret = -ETIMEDOUT;
+			goto out;
+		}
 	}
 
 	r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
 	r &= ~MUSB_ULPI_REG_CMPLT;
 	musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
 
-	return 0;
+out:
+	pm_runtime_put(phy->io_dev);
+
+	return ret;
 }
 #else
 #define musb_ulpi_read		NULL
@@ -1904,14 +1922,17 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 
 	if (!musb->isr) {
 		status = -ENODEV;
-		goto fail3;
+		goto fail2;
 	}
 
 	if (!musb->xceiv->io_ops) {
+		musb->xceiv->io_dev = musb->controller;
 		musb->xceiv->io_priv = musb->mregs;
 		musb->xceiv->io_ops = &musb_ulpi_access;
 	}
 
+	pm_runtime_get_sync(musb->controller);
+
 #ifndef CONFIG_MUSB_PIO_ONLY
 	if (use_dma && dev->dma_mask) {
 		struct dma_controller	*c;
@@ -2023,6 +2044,8 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 		goto fail5;
 #endif
 
+	pm_runtime_put(musb->controller);
+
 	dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n",
 			({char *s;
 			 switch (musb->board_mode) {
@@ -2047,6 +2070,9 @@ fail4:
 		musb_gadget_cleanup(musb);
 
 fail3:
+	pm_runtime_put_sync(musb->controller);
+
+fail2:
 	if (musb->irq_wake)
 		device_init_wakeup(dev, 0);
 	musb_platform_exit(musb);