Merge tag 'omap-devel-b-c-2-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into devel-late

OMAP patches intended for the 3.7 merge window:

- Runtime PM conversions for the GPMC and RNG IP blocks
- Preparation patches for the OMAP common clock framework conversion
- clkdev alias additions required by other drivers
- Performance Monitoring Unit (PMU) support for OMAP2, 3, and non-4430 OMAP4
- OMAP hwmod code and data improvements
- Preparation patches for the IOMMU runtime PM conversion
- Preparation patches for OMAP4 full-chip retention support

Based on a merge of v3.6-rc6, the omap-cleanup-b-for-3.7 tag
(7852ec0536ca39cefffc6301dc77f8ae55592926),the cleanup-fixes-for-v3.7
tag (de6ca33a96a6bf61fcb91d3d399703e19ead9d1e), and the
omap-devel-am33xx-for-v3.7 tag
(11964f53eb4d9ce59a058be9999d9cfcb1ced878), due to dependencies.

These patches have been tested for meaningful warnings from
checkpatch, sparse, smatch, and cppcheck.  Basic build, boot[1], and
PM test logs are available here:

    http://www.pwsan.com/omap/testlogs/hwmod_prcm_clock_a_3.7/20120923173830/

...

1. Note that the N800 boot fails due to a known issue present in the
   base commit:

    http://www.spinics.net/lists/arm-kernel/msg196034.html

1 files changed, 78 insertions, 0 deletions

diff --git a/include/linux/tty_flags.h b/include/linux/tty_flags.h
new file mode 100644
index 000000000000..eefcb483a2c0
--- /dev/null
+++ b/include/linux/tty_flags.h
@@ -0,0 +1,78 @@
+#ifndef _LINUX_TTY_FLAGS_H
+#define _LINUX_TTY_FLAGS_H
+
+/*
+ * Definitions for async_struct (and serial_struct) flags field also
+ * shared by the tty_port flags structures.
+ *
+ * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
+ */
+#define ASYNCB_HUP_NOTIFY	 0 /* Notify getty on hangups and closes
+				    * on the callout port */
+#define ASYNCB_FOURPORT		 1 /* Set OU1, OUT2 per AST Fourport settings */
+#define ASYNCB_SAK		 2 /* Secure Attention Key (Orange book) */
+#define ASYNCB_SPLIT_TERMIOS	 3 /* Separate termios for dialin/callout */
+#define ASYNCB_SPD_HI		 4 /* Use 56000 instead of 38400 bps */
+#define ASYNCB_SPD_VHI		 5 /* Use 115200 instead of 38400 bps */
+#define ASYNCB_SKIP_TEST	 6 /* Skip UART test during autoconfiguration */
+#define ASYNCB_AUTO_IRQ		 7 /* Do automatic IRQ during
+				    * autoconfiguration */
+#define ASYNCB_SESSION_LOCKOUT	 8 /* Lock out cua opens based on session */
+#define ASYNCB_PGRP_LOCKOUT	 9 /* Lock out cua opens based on pgrp */
+#define ASYNCB_CALLOUT_NOHUP	10 /* Don't do hangups for cua device */
+#define ASYNCB_HARDPPS_CD	11 /* Call hardpps when CD goes high  */
+#define ASYNCB_SPD_SHI		12 /* Use 230400 instead of 38400 bps */
+#define ASYNCB_LOW_LATENCY	13 /* Request low latency behaviour */
+#define ASYNCB_BUGGY_UART	14 /* This is a buggy UART, skip some safety
+				    * checks.  Note: can be dangerous! */
+#define ASYNCB_AUTOPROBE	15 /* Port was autoprobed by PCI or PNP code */
+#define ASYNCB_LAST_USER	15
+
+/* Internal flags used only by kernel */
+#define ASYNCB_INITIALIZED	31 /* Serial port was initialized */
+#define ASYNCB_SUSPENDED	30 /* Serial port is suspended */
+#define ASYNCB_NORMAL_ACTIVE	29 /* Normal device is active */
+#define ASYNCB_BOOT_AUTOCONF	28 /* Autoconfigure port on bootup */
+#define ASYNCB_CLOSING		27 /* Serial port is closing */
+#define ASYNCB_CTS_FLOW		26 /* Do CTS flow control */
+#define ASYNCB_CHECK_CD		25 /* i.e., CLOCAL */
+#define ASYNCB_SHARE_IRQ	24 /* for multifunction cards, no longer used */
+#define ASYNCB_CONS_FLOW	23 /* flow control for console  */
+#define ASYNCB_FIRST_KERNEL	22
+
+#define ASYNC_HUP_NOTIFY	(1U << ASYNCB_HUP_NOTIFY)
+#define ASYNC_SUSPENDED		(1U << ASYNCB_SUSPENDED)
+#define ASYNC_FOURPORT		(1U << ASYNCB_FOURPORT)
+#define ASYNC_SAK		(1U << ASYNCB_SAK)
+#define ASYNC_SPLIT_TERMIOS	(1U << ASYNCB_SPLIT_TERMIOS)
+#define ASYNC_SPD_HI		(1U << ASYNCB_SPD_HI)
+#define ASYNC_SPD_VHI		(1U << ASYNCB_SPD_VHI)
+#define ASYNC_SKIP_TEST		(1U << ASYNCB_SKIP_TEST)
+#define ASYNC_AUTO_IRQ		(1U << ASYNCB_AUTO_IRQ)
+#define ASYNC_SESSION_LOCKOUT	(1U << ASYNCB_SESSION_LOCKOUT)
+#define ASYNC_PGRP_LOCKOUT	(1U << ASYNCB_PGRP_LOCKOUT)
+#define ASYNC_CALLOUT_NOHUP	(1U << ASYNCB_CALLOUT_NOHUP)
+#define ASYNC_HARDPPS_CD	(1U << ASYNCB_HARDPPS_CD)
+#define ASYNC_SPD_SHI		(1U << ASYNCB_SPD_SHI)
+#define ASYNC_LOW_LATENCY	(1U << ASYNCB_LOW_LATENCY)
+#define ASYNC_BUGGY_UART	(1U << ASYNCB_BUGGY_UART)
+#define ASYNC_AUTOPROBE		(1U << ASYNCB_AUTOPROBE)
+
+#define ASYNC_FLAGS		((1U << (ASYNCB_LAST_USER + 1)) - 1)
+#define ASYNC_USR_MASK		(ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
+		ASYNC_LOW_LATENCY)
+#define ASYNC_SPD_CUST		(ASYNC_SPD_HI|ASYNC_SPD_VHI)
+#define ASYNC_SPD_WARP		(ASYNC_SPD_HI|ASYNC_SPD_SHI)
+#define ASYNC_SPD_MASK		(ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
+
+#define ASYNC_INITIALIZED	(1U << ASYNCB_INITIALIZED)
+#define ASYNC_NORMAL_ACTIVE	(1U << ASYNCB_NORMAL_ACTIVE)
+#define ASYNC_BOOT_AUTOCONF	(1U << ASYNCB_BOOT_AUTOCONF)
+#define ASYNC_CLOSING		(1U << ASYNCB_CLOSING)
+#define ASYNC_CTS_FLOW		(1U << ASYNCB_CTS_FLOW)
+#define ASYNC_CHECK_CD		(1U << ASYNCB_CHECK_CD)
+#define ASYNC_SHARE_IRQ		(1U << ASYNCB_SHARE_IRQ)
+#define ASYNC_CONS_FLOW		(1U << ASYNCB_CONS_FLOW)
+#define ASYNC_INTERNAL_FLAGS	(~((1U << ASYNCB_FIRST_KERNEL) - 1))
+
+#endif